0

TABLE OF CONTENTS HOTSY PRESSURE WASHERS HOTSY HEATERS HOTSY BRANDED PARTS HOTSY DETERGENTS GUNS & LANCES HOSE & HOSE REELS COUPLERS, FITTINGS & FILTERS NOZZLES PUMPS & PUMP KITS UNLOADERS, INJECTORS, VALVES & GUAGES ENGINES, MOTORS & PULLEYS BURNERS ELECTRICAL COMPONENTS CHASSIS COMPONENTS PRESSURE WASHER ACCESSORIES CAR WASH BAY ACCESSORIES PARTS WASHER PARTS AG SPRAY ACCESSORIES CARPET & RESTORATION 2 15 16 35 45 53 64 78 91 116 136 142 154 165 167 177 184 189 195

HOTSY PRESSURE WASHERS / HOT WATER 333 MODEL n Oil-Fired Heater n 1.7 GPM @ 1200 PSI n Auto Start/Stop MODEL 333 OPTIONS PART NO. 2.642-305.0 4.760-245.0 9.112-508.0 9.112-533.0 6.389-479.0 4.767-001.0 4.767-022.0 4.775-526.0 6.401-459.0 PART NO. GPM PSI 1.064-049.0 1.7 1200 DESCRIPTION Gutter cleaning lance Underbody lance 21” wand with quick connect female threads 21” wand with quick connect male threads High-pressure hose, 10m DN8, extension piece Triple nozzle, touchless changeover Dirtblaster, small Servo-press controller, less than 303 GPM Plug nipple 500 SERIES and Model 680SS n Oil-Fired or LP-Fired n 115V/1PH n 1725 RPM Direct-Drive Pump n Flat Free Tires for Easy Handling Model 555SS MODEL 555SS 558 560SS 680SS PART NO. GPM PSI 1.109-033.0 2.2 1300 1.109-610.0 2.2 1300 1.109-034.0 2.1 1500 1.109-035.0 3.0 1000 SS=Stainless Steel OPTIONS PART NO. 8.717-728.0 8.717-764.0 8.903-049.0 DESCRIPTION 8” LP Gas-Fired Draft Diverter (Model 558) 8” Oil-Fired Vent Regulator (Models 555SS, 560SS & 680SS) Portagear, Model 558 OPTIONS PART NO. 8.717-791.0 8.903-034.0 8.750-486.0 HP 2 2 2.3 2 115/1 115/1 115/1 115/1 20 18 20 20 Model 558-Propane (Shown with optional Portagear & Propane Tank) Model 560SS Model 680SS The 500 Series delivers rugged, yet affordable, cleaning power for a broad range of applications, from agriculture to building maintenance. The sporty 555SS, with its stainless steel coil skin, is our most popular entry level hot water model—compact, evenly balanced, easy to maneuver, and engineered with the operator in mind. As with the entire Hotsy line, all models in the 500 series are ETL safety certified to UL-1776, with Hotsy pumps backed by a 7-year limited warranty. A pressure relief valve is standard on all 500 Series models. Equipped with a 50’ hose. VOLT/PH AMPS FUEL BTU/HR Oil LP Oil Oil PUMP MODEL 214,300 214,300 214,300 289,900 Duplex - HHC165L.1 Duplex - HHC165L.1 Triplex - HHC205L.1 Triplex - HF2830S PORTABILITY Std Optional Std Std DIMENSIONS 33”Lx27”Wx41.5”H 31.5”Lx26”Wx41”H 33”Lx26”Wx44”H 33”Lx27”Wx45.5”H SHIP WT (lbs) 360 350 395 405 HP 2.3 115/1 12.5 The 333 Model is a competitively priced, entry-class hot water pressure washer. Innovative upright design ensures good mobility and ergonomics, while its compact size makes it easy to transport both horizontally and vertically. Built-in 3 angle spray nozzle, and low pressure chemical application. Very user-friendly with one switch operation and areas for hose and accessory storage. Equipped with 33-ft. high-pressure hose and 16’ power cord. VOLT/PH AMPS FUEL BTU/HR Oil 80,000 PUMP MODEL Axial OPTIONS PART NO. 6.390-028.0 4.762-010.0 2.638-526.0 2.640-482.0 2.883-803.0 4.767-230.0 3.637-170.0 PORTABILITY Std DESCRIPTION Pipe cleaning hose Wet blasting attachment Nozzle kit for wet blasting attachment Nozzle kit for surface cleaner FR Power nozzle 25o spray angle Dirtblaster nozzle 035 Detergent injector for high pressure DIMENSIONS 28”Lx28”Wx46”H SHIP WT (lbs) 178 DESCRIPTION Propane Tank, 43 lb. (Model 558) Float Tank, 555SS (Field Install) 360o Pivot Reel, 100’ (fits all 500 Series EXCEPT 558) Page 2

HOTSY PRESSURE WASHERS / HOT WATER Model 790SS 700 SERIES and Model 895SS n Oil-Fired, LP- or Natural-Gas-Fired n Direct- & Belt-Drive n Flat Free Tires for Easy Handling MODEL 771 772 790SS 795SS PART NO. 1.109-611.0 1.109-037.0 1.109-612.0 1.109-039.0 795SS-208 1.109-040.0 895SS 1.109-077.0 SS=Stainless Steel OPTIONS PART NO. 8.717-728.0 8.717-764.0 8.903-049.0 DESCRIPTION 8” Natural Gas- or LP Gas-Fired Draft Diverter (Models 771, 772) 8” Oil-Fired Vent Regulator (Models 790SS, 795SS & 895SS) Portagear, Model 771 800 SERIES n Oil-Fired n Big & Beefy, Yet Easy To Maneuver n Rugged Hotsy Pump with 7-Year Limited Warranty n Stainless-Steel Coil Skin MODEL 821 842 843 844 845 851 852 853 854 855 856 873 874 OPTIONS PART NO 8.930-170.0 8.930-172.0 8.930-171.0* 8.717-764.0 PART NO. 1.109-120.0 1.109-121.0 1.109-122.0 1.109-123.0 1.109-124.0 1.109-125.0 1.109-126.0 1.109-127.0 1.109-128.0 1.109-129.0 1.109-130.0 1.109-131.0 1.109-132.0 GPM PSI Shown with optional hose reel 4.0 2300 6.2 4.0 2000 4.0 2000 4.0 2000 4.0 2000 5 5 5 5 4.0 3000 8.2 4.0 3000 7.5 4.0 3000 7.5 4.0 3000 7.5 4.0 3000 7.5 4.0 3000 8.2 5.0 3000 5.0 3000 10 10 DESCRIPTION Auto Start/Stop Kit (Field Installed)* Thermal Shutdown Kit (Field Installed) Time Delay Shutdown (Field Installed)* 8” Oil-Fired Vent Regulator * Note: Time Delay Shutdown and Auto Start/Stop cannot be combined on the same machine Page 3 3450 1725 1725 1725 1725 3450 1725 1725 1725 1725 3450 1725 1770 208/1 208/3 230/1 230/3 460/3 208/1 208/3 230/1 230/3 460/3 575/3 230/1 230/3 OPTIONS PART NO. 8.717-791.0 8.750-486.0 8.750-483.0 DESCRIPTION Propane Tank, 43 lb. 360o Pivot Reel, 100’ 360o Pivot Reel, 200’ (fits all models EXCEPT 771, 772) GPM PSI 3.0 3.0 3.0 3.5 3.5 3.5 1500 1500 HP 3 3 2000 4TEFC 2000 2000 3000 5 5 8.2 13 13 20 24 27 36 VOLT/PH AMPS FUEL 230/1 230/1 230/1 230/1 208/1 230/1 LP NG Oil Oil Oil Oil Model 771-Propane (Shown with optional Portagear & Propane Tank ) Model 895SS The 700 Series offers a nice balance of Hotsy ruggedness and cleaning performance, yet the affordability of an entry-level machine. In addition to the two direct-drive models, this series also offers belt-drive models that clean at 3.0 GPM and 2000 PSI. More powerful yet is the 895SS. The multiple fuel and electrical options makes the 700 series ideal for meeting the needs of commercial customers. All models are ETL safety certified and feature the Hotsy Triplex pump with a 7-year limited warranty. A pressure relief valve is standard on all 700 Series models. Equipped with a 50’ hose. BTU/HR PUMP MODEL DRIVE PORTABILITY 280,000 HHC235R.1 338,000 HHC235R.1 289,900 289,900 289,900 HB4025R HB4025R HB4025R 289,900 HHC506R.1 Direct Direct Belt Belt Belt Belt Optional N/A Std Std Std Std DIMENSIONS 32”Lx27”Wx45.5”H 32”Lx27”Wx45.5”H 37”Lx28”Wx45.5”H 37”Lx28”Wx45.5”H 37”Lx28”Wx45.5”H 37”Lx28”Wx45.5”H SHIP WT(lbs) 415 415 450 455 500 480 The 800 Series - rugged design, easy maneuverability and massive cleaning power. Comparable to the cleaning power of Hotsy’s heavy-duty stationary units, the big and beefy 800 Series is surprisingly easy to maneuver into place, allowing you to tackle the heaviest of industrial cleaning jobs. The 28” wide wheel base helps with stability, yet is narrow enough to fit easily through doorways. Components are protected by an easy-to-remove cover allowing servicing access. All 800 series hot water pressure washers are backed by a 7-year limited warranty on the Hotsy Triplex pump. A pressure relief valve, upstream detergent injector and stainless steel coil wrap are standard features on all 800 Series models, which are ETL certified. Equipped with a 50’ hose. U.S. Design Patent No. 726,382 S HP MOTOR VOLT/PH AMPS FUEL RPM 33 20 29 19 10 44 25 37 25 14 11 42 29 Oil Oil Oil Oil Oil Oil Oil Oil Oil Oil Oil Oil Oil BTU/HR PUMP MODEL DRIVE PORTABILITY DIMENSIONS 381,000 HM4045R.3 381,000 HM4030R.3 381,000 HM4030R.3 381,000 HM4030R.3 381,000 HM4030R.3 381,000 HM4045R.3 381,000 HM4030R.3 381,000 HM4030R.3 381,000 HM4030R.3 381,000 HM4030R.3 381,000 HM4045R.3 404,000 HM4030R.3 404,000 HM4030R.3 OPTIONS PART NO 8.750-486.0 8.750-483.0 8.711-907.0 8.923-225.0 Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt DESCRIPTION 360o Pivot Reel, 100’ 360o Pivot Reel, 200’ Pneumatic Wheel - 12 1/2” (4 required) Detergent Bucket Bracket Std Std Std Std Std Std Std Std Std Std Std Std Std 51”Lx28”Wx51”H 51”Lx28”Wx51”H 51”Lx28”Wx51”H 51”Lx28”Wx51”H 51”Lx28”Wx51”H 51”Lx28”Wx51”H 51”Lx28”Wx51”H 51”Lx28”Wx51”H 51”Lx28”Wx51”H 51”Lx28”Wx51”H 51”Lx28”Wx51”H 51”Lx28”Wx51”H 51”Lx28”Wx51”H SHIP WT (lbs) 632 622 622 622 691 675 665 665 665 665 680 670 675

HOTSY PRESSURE WASHERS / HOT WATER 900/1400 SERIES n LP-or Natural Gas-Fired n Belt-Drive Hotsy Pump n Smart Relay Control provides control over run time, auto start/stop and shut down functionality n Remote Ready MODEL 921P 921N 926P 926N 942P 942N 943P 943N 944P 944N 945P 945N 1451P 1451N 1452P 1452N 1453P 1453N 1454P 1454N 1455P 1455N 1456P 1456N 1473P 1473N 1474P 1474N 1475P 1475N OPTIONS PART NO 8.916-989.0 8.916-988.0 8.717-728.0 8.903-543.0 9.803-452.0 8.755-253.0 8.749-807.0 8.924-814.0 PART NO. 1.109-948.0 1.109-691.0 1.109-949.0 1.109-692.0 1.109-693.0 1.109-694.0 1.109-695.0 1.109-696.0 1.109-697.0 1.109-698.0 1.109-699.0 1.109-700.0 1.109-950.0 1.109-701.0 1.109-702.0 1.109-703.0 1.109-704.0 1.109-705.0 1.109-706.0 1.109-707.0 1.109-708.0 1.109-709.0 1.109-951.0 1.109-710.0 1.109-711.0 1.109-713.0 1.109-712.0 1.109-714.0 1.109-952.0 1.109-953.0 GPM PSI 4.0 2300 4.0 2300 4.0 2000 4.0 2000 4.0 2000 4.0 2000 4.0 2000 4.0 2000 4.0 2000 4.0 2000 4.0 2000 4.0 2000 3.5 3000 3.5 3000 3.5 3000 3.5 3000 3.5 3000 3.5 3000 3.5 3000 3.5 3000 3.5 3000 3.5 3000 3.5 3000 3.5 3000 5.0 3000 5.0 3000 5.0 3000 5.0 3000 5.0 3000 5.0 3000 * including connectors and flue outlet DESCRIPTION Remote Station Soap Solenoid and Switch 8” Natural Gas- or LP Gas-Fired Draft Diverter Wheel Kit with LP Bottle Rack Water Inlet Solenoid (Field Installed) 8” Power Dampener Power Dampener Wiring Harness R-Con Wireless Remote Kit (1 remote/1 receiver) Page 4 OPTIONS PART NO 8.925-072.0 8.924-878.0 8.756-329.0 DESCRIPTION R-Con Wireless Remote Kit (2 remote/1 receiver) Wall Mount Remote Bracket for R-Con Replacement Remote (transmitter only) R-Con Wireless Remote & Receiver (8.925-814.0) Wall Mount Bracket for R-Con Wireless Remote (8.924-871.0) HP MOTOR VOLT/PH AMPS FUEL RPM 6.2 6.2 5 5 5 5 5 5 5 5 5 5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 8.2 8.2 10 10 10 10 10 10 3450 3450 1800 1800 1725 1725 1725 1725 1725 1725 1725 1725 3450 3450 1725 1725 1725 1725 1725 1725 1725 1725 3450 3450 1725 1725 1770 1770 1725 1725 208/1 208/1 575/3 575/3 208/3 208/3 230/1 230/1 230/3 230/3 460/3 460/3 208/1 208/1 208/3 208/3 230/1 230/1 230/3 230/3 460/3 460/3 575/3 575/3 230/1 230/1 230/3 230/3 208/3 208/3 28 28 7 7 18 18 25 25 16 16 8 8 42 42 24 24 34 34 24 24 12 12 10 10 42 42 29 29 32 32 LP NG LP NG LP NG LP NG LP NG LP NG LP NG LP NG LP NG LP NG LP NG LP NG LP NG LP NG LP NG BTU/HR PUMP MODEL DRIVE 364,835 364,835 364,835 364,835 360,997 364,835 360,997 364,835 360,997 364,835 360,997 364,835 364,835 364,835 360,997 364,835 360,997 364,835 360,997 364,835 360,997 364,835 364,835 364,835 378,617 390,025 378,617 390,025 378,617 378,617 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4035R.3 HM4035R.3 HM4035R.3 HM4035R.3 HM4030R.3 HM4030R.3 Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt DIMENSIONS 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* 47.5”Lx21”Wx51”H* SHIP WT (lbs) 700 700 660 660 590 655 685 685 580 680 585 585 730 730 625 625 735 735 625 700 630 780 621 621 735 735 740 740 740 740 The 900/1400 Series - Hotsy’s innovative stationary models are packed with standard features! The most impressive is the programmable smart control automation. Safety is key with a pressure relief valve and locking lid and side panels around the belt and pulleys to keep users safe. These electric-powered washers are available in either LP or Natural Gas fired models. New models have the same footprint as previous generations, so users can feel confident about upgrading. Panels may be easily removed for access to the machine components for servicing. All models are ETL certified to the rigid UL-1776 safety standards. Features a Hotsy highly efficient Triplex pump. Equipped with a 50’ hose. U.S. Design Patent No. 740,501 S

HOTSY PRESSURE WASHERS / HOT WATER 1800 SERIES n Natural Gas, Oil or optional LP-Fired n Belt Drive Pump n Smart Relay Control provides control over run time, auto start/stop and shut down functionality MODEL 1812SS 1830SS 1832SS PART NO. 1.109-660.0 1.109-665.0 1.109-662.0 1832SS-208 1.109-661.0 1833SS 1835SS 1836SS 1.109-666.0 1.109-663.0 1.109-664.0 SS=Stainless Steel OPTIONS PART NO. 8.916-989.0 8.916-988.0 8.749-806.0 8.749-807.0 8.903-074.0 9.801-040.0 GPM 6.0 6.0 6.0 6.0 6.0 6.0 6.0 PSI 2500 3000 3000 3000 3000 3000 3000 HP 10 15 15 15 15 15 15 VOLT/PH AMPS FUEL 230/1 230/3 230/3 208/3 460/3 460/3 575/3 *Oil-Fired models are not supplied with a fuel tank. DESCRIPTION Remote Station Soap Solenoid and Switch 10” Power Dampener Power Dampener Wiring Harness LP Conversion Kit (Factory Installed) 10” Natural Gas- or LP Gas-Fired Draft Diverter 5700/5800 SERIES n Oil, Natural Gas or optional LP-Fired n Belt Drive Pump n Smart Relay Control provides control over run time, auto start/stop and shut down functionality MODEL 5730SS 5732SS-208 5732SS 5733SS 5735SS 5736SS 5832SS 5832SS-208 5835SS 5836SS SS=Stainless Steel OPTIONS PART NO. 8.916-916.0 8.916-915.0 8.753-171.0 8.749-807.0 PART NO. 1.109-658.0 1.109-654.0 1.109-655.0 1.109-659.0 1.109-656.0 1.109-657.0 1.109-651.0 1.109-650.0 1.109-652.0 1.109-653.0 GPM 8.0 8.0 8.0 8.0 8.0 8.0 9.5 9.5 9.5 9.5 PSI 3000 3000 3000 3000 3000 3000 2500 2500 2500 2500 Dimensions: 51”L x 31”W x 63.4”H DESCRIPTION LP Conversion Kit, 5700 (Factory Installed) LP Conversion Kit, 5800 (Factory Installed) 12” Power Dampener Power Dampener Wiring Harness 9.803-452.0 Water Inlet Solenoid (Factory Installed) 8.916-989.0 Remote Station HP 20 20 20 20 20 20 20 20 20 20 VOLT/PH 230/3 208/3 230/3 460/3 460/3 575/3 230/3 208/3 460/3 575/3 OPTIONS PART NO. 8.916-988.0 8.717-730.0 8.924-814.0 8.925-072.0 AMPS 44 55 42 23 21 16 42 48 21 16 OPTIONS PART NO. 8.925-072.0 DESCRIPTION 8.803-452.0 Water Inlet Solenoid (Field Installed) 8.924-814.0 R-Con Wireless Remote Kit (1 remote /1 receiver) R-Con Wireless Remote Kit (2 remotes/1 receiver) 8.924-878.0 Wall Mount Remote Bracket for R-Con 8.756-329.0 Replacement Remote (transmitter only) R-Con Wireless Remote & Receiver (8.925-814.0) Wall Mount Bracket for R-Con Wireless Remote (8.924-871.0) 42 35 33 36 21 19 16 NG Oil* NG NG Oil* NG NG The 1800 Series provides stationary cleaning with hot water indoors. The 7 models are electric-powered and natural gas, oil or optional LP gas-heated. The coil skin comes standard with stainless steel. The sleek cabinet has removeable side and front panels, making it easy for routine scheduled maintenance and service. The Smart Relay allows the washer to be customized to individual needs, and is protected behind the front panel. All models are certified to the rigid UL-1776 safety standards and feature the highly efficient Hotsy Triplex pump. A pressure switch is a standard feature on all 1800 Series models. Equipped with a 50’ hose. BTU/HR 558,050 579,776 558,050 558,050 579,776 558,050 558,050 PUMP MODEL DRIVE HX9536L.2 HX9536L.2 HX9536L.2 HX9536L.2 HX9536L.2 HX9536L.2 HX9536L.2 Belt Belt Belt Belt Belt Belt Belt DIMENSIONS 51”Lx31”Wx53.25”H 51”Lx31”Wx53.25”H 51”Lx31”Wx53.25”H 51”Lx31”Wx53.25”H 51”Lx31”Wx53.25”H 51”Lx31”Wx53.25”H 51”Lx31”Wx53.25”H SHIP WT (lbs) 1,020 1,020 1,020 1,020 1,020 1,020 1,020 The 5700 and 5800 Series produces a powerful punch and is ideal for wash bay installations. With its 20 HP motor driving the incomparable Hotsy Triplex Pump and a vertical banded belt, the 5700 and 5800 Series delivers cleaning power up to 9.5 GPM and 3000 PSI. Has a sleek cabinet with removeable panels for easy access for maintenance. A removeable control panel provides access to the adjustable temperature control and the Smart Relay for secured control of operating positions. Remote ready for wash bay installations. All models are stationary and certified to the rigid UL-1776 safety standards. Equipped with a 50’ hose. FUEL Oil* NG NG Oil* NG NG NG NG NG NG BTU/HR 768,000 720,450 720,450 768,000 720,450 720,450 939,890 939,890 939,890 939,890 *Oil-Fired models are not supplied with a fuel tank. DESCRIPTION Soap Solenoid and Switch 12” Natural Gas- or LP Gas-Fired Draft Diverter R-Con Wireless Remote Kit (1 remote/1 receiver) R-Con Wireless Remote Kit (2 remotes/1 receiver) 8.924-878.0 Wall Mount Remote Bracket for R-Con 8.756-329.0 Replacement Remote (transmitter only) Page 5 R-Con Wireless Remote & Receiver (8.925-814.0) Wall Mount Bracket for R-Con Wireless Remote (8.924-871.0) PUMP MODEL HX9536L.2 HX9536L.2 HX9536L.2 HX9536L.2 HX9536L.2 HX9536L.2 HX1036L.2 HX1036L.2 HX1036L.2 HX1036L.2 HOSE 50’ 50’ 50’ 50’ 50’ 50’ 50’ 50’ 50’ 50’ SHIP WT 1,471 1,471 1,471 1,471 1,471 1,471 1,471 1,471 1,461 1,471

HOTSY PRESSURE WASHERS / HOT WATER GASENGINE SERIES 1065SSE DIRECT-DRIVE n Oil-Fired n 12 Volt DC n Direct Drive n 3 Battery-less Models n 2 Electric-Start Models n Flat Free Tires for Easy Handling MODEL 965SS* 1065SS* 1065SSE† 1075SSE† PART NO. 1.110-015.0 1.110-010.0 1.110-011.0 1.110-012.0 3.0 3.5 3.5 4.0 965SS The Gas Engine Series consists of the most compact and portable hot water pressure washers on the market. Powered by reliable gasoline engines, all you need is water and you can clean anywhere anytime. The five models offer a broad range of cleaning power, from 3.0 to 4.0 GPM and from 3000 to 3500 PSI. All models feature Hotsy’s highly efficient Triplex pump backed by Hotsy’s 7-year pump limited warranty and all are ETL safety certified. All models are equipped with a standard pressure switch and 50’ hose. GPM PSI ENGINE / MODEL CC’s BURNER BTU/HR PUMP MODEL DRIVE PORTABILITY DIMENSIONS SHIP WT (lbs) 3000 Honda GX270 3000 Honda GX340 3000 Honda GX340 3500 Honda GX390 270 12V DC 248,500 HG3035G1.1 Direct 337 12V DC 309,900 337 12V DC 309,900 389 12V DC 309,900 * Battery not required † 12V battery required, but not supplied E= Electric-start engine HS3540G.3 Direct HS3540G.3 Direct HS4040G.3 Direct Std Std Std Std 47”Lx31”Wx41”H 47”Lx31”Wx45”H 47”Lx31”Wx45”H 47”Lx31”Wx45”H 445 495 510 520 GASENGINE SERIES BELT-DRIVE 965B (Shown with optional pneumatic tires) n Oil-Fired n 12 Volt DC n Belt Drive n 2 Electric-Start Models 1075BE (Shown with optional caster wheel kit) MODEL PART NO. 965B* 1.110-565.0 1075BE† 1080BE† 1.110-566.0 1.110-567.0 1080BE (Shown with optional stainless steel coil wrap and skid rails) The belt-drive versions of the Gas Engine Series provide versatility with the roll cage design. Designed to fit the needs of the end-user, this versatile hot water washer converts easily to a skid unit, portable with wheels or a wheel/caster kit, or can be mounted on a trailer. Powered by reliable gasoline engines, the three models offer a broad range of cleaning power, from 3.0 to 4.6 GPM and from 3000 to 3500 PSI. All models feature the Hotsy Triplex pump backed by Hotsy’s 7-year pump limited warranty and all are ETL safety certified. All models are equipped with a standard pressure switch and 50’ hose. GPM PSI ENGINE / MODEL CC’s BURNER BTU/HR PUMP MODEL DRIVE PORTABILITY Honda GX270 270 12V DC 248,500 Honda GX390 389 12V DC 385,800 Briggs VAN 18 570 12V DC 385,800 3.0 4.0 4.6 3000 3500 3500 * Battery not required † 12V battery required, but not supplied E= Electric-start engine OPTIONS PART NO. 8.916-172.0 8.916-173.0 8.931-259.0 8.931-260.0 8.931-261.0 8.916-175.0 8.916-174.0 8.915-274.0 DESCRIPTION Float Tank Kit (includes high pressure detergent kit), 1075BE & 1080BE models Float Tank Kit (includes high pressure detergent kit) 965B model Skid Rail Kit (Field Installed)- adds 3.875” to height Caster Kit - 2 casters / 2 wheels (Field Installed) - adds 7.5” to height Pneumatic Tire Kit with Handle Bar (Field Installed) - adds 10” to width, 6” to height High Pressure Detergent Kit, 1075BE & 1080BE models (to be used with a remote water tank) High Pressure Detergent Kit, 965B models (to be used with a remote water tank) Stainless Steel Coil Wrap (Field Installed) Page 6 HD3030L.1 HM4035L.3 HM4035L.3 B= Belt Drive Belt Belt Belt Optional Optional Optional DIMENSIONS 42”Lx27.5”Wx39”H 42”Lx27.5”Wx39”H 42”Lx27.5”Wx39”H SHIP WT (lbs) 590 625 665

HOTSY PRESSURE WASHERS / HOT WATER 1200 SERIES and Model 5645 n Gas/Diesel-Powered n Oil-Fired n Belt Drive n Electric Start 1260SS MODEL 1260SS 1260SSG* 1270SS 1.110-533.0 1.110-535.0 1.110-557.0 1270SSG* 1.110-536.0 1280SS 1.110-558.0 1280SSG* 1.110-537.0 1285SS 1.110-043.0 1285SSG* 1.110-044.0 1290SS 1290SSG* 1291SS 1291SSG* 1265SSD 1.110-538.0 1.110-539.0 1.110-075.0 1.110-076.0 1.110-073.0 1265SSDS** 1.110-074.0 5645* 1.110-556.0 PART NO. GPM PSI ENGINE / MODEL FUEL 4.5 3000 Briggs VAN 18 Gas 4.5 3000 Briggs VAN 18 Gas 4.5 4000 Honda GX630 Gas 4.5 4000 Honda GX630 Gas 5.1 3500 Honda GX630 Gas 5.1 3500 Honda GX630 Gas 5.1 3500 Briggs VAN 21 Gas 5.1 3500 Briggs VAN 21 Gas 5.6 3000 Honda GX630 Gas 5.6 3000 Honda GX630 Gas 8.0 3000 Honda GX660 Gas 8.0 3000 Honda GX660 Gas 4.5 3000 Kubota Z602-E4B Diesel 4.5 3000 Kubota Z602-E4B Diesel 6.0 3000 Honda GX660 Gas * Models include a 2000W Generator **Models include stainless frame 12V battery is required for all models, but is not supplied CC’s 570 570 688 688 688 688 627 627 688 688 688 688 599 599 688 BURNER 12V DC 120V AC 12V DC 120V AC 12V DC 120V AC 12V DC 120V AC 12V DC 120V AC 12V DC 120V AC 12V DC 12V DC 120V AC BTU/HR PUMP MODEL DRIVE 385,800 HM4035R.2 Belt 398,400 HM4035R.2 Belt 385,800 HX5843R.2 Belt 398,400 HX5843R.2 Belt 385,800 HX8043R.2 Belt 398,400 HX8043R.2 Belt 385,800 HX8043R.2 Belt 398,400 HX8043R.2 Belt 385,800 HX8043R.2 Belt 398,400 HX8043R.2 Belt Belt Belt Belt Belt HX9536R HX9536R HM4035 HM4035 DIMENSIONS SHIP WT (lbs) 45”Lx33”Wx52”H 385,800 398,400 385,800 385,800 528,000 HX8043R.2 Belt 45”Lx33”Wx52”H 45”Lx33”Wx52”H 45”Lx33”Wx52”H 45”Lx33”Wx52”H 45”Lx33”Wx52”H 45”Lx33”Wx52”H 45”Lx33”Wx52”H 45”Lx33”Wx52”H 45”Lx33”Wx52”H 45”Lx33”Wx52”H 45”Lx33”Wx52”H 45”Lx33”Wx52”H 45”Lx33”Wx52”H 61”Lx32”Wx50”H 745 830 855 870 760 750 840 895 744 905 760 920 795 795 1126 1270SS Shown with optional Portagear Kit 5645 The 1200 Series delivers some serious on-site, hot water cleaning capability of up to 6 GPM and 4000 PSI. Rugged gasoline engines all have electric start. Six models come with a 2000W generator. The self-contained cleaning units are built to hold up under the toughest of conditions. All feature the Hotsy Triplex pump, with its 7-year limited warranty and ETL safety certification (CSA-Certified for non-generator models). All 1200 Series models are equipped with a standard flow switch and 50’ hose. OPTION PART NO. 8.903-025.0 DESCRIPTION Portagear Kit (all models except 5645) Page 7

HOTSY PRESSURE WASHERS / HOT WATER Super Skid HSS HSDS n Diesel-Powered n Diesel-Fired n Belt Drive n Electric-Start MODEL HSS-503069E HSS-653569E HSS-803069E HSS-952569E PART NO. 1.110-604.0 1.110-605.0 1.110-606.0 1.110-607.0 SUPER DUTY MODELS: MODEL PART NO. HSDS-503069E 1.110-616.0 HSDS-653569E 1.110-617.0 HSDS-803069E 1.110-618.0 HSDS-952569E 1.110-619.0 OPTIONS PART NO. 8.923-164.0 8.923-125.0 8.923-124.0 GPM PSI 5.0 6.5 8.0 9.5 3000 ENGINE / MODEL CC’s Kubota Z602-E4B 599 BURNER 12V DC 3500 Kubota D1105-E4B 1123 12V DC 3000 Kubota D1105-E4B 1123 12V DC 2500 Kubota D1105-E4B 1123 12V DC GPM PSI 5.0 6.5 8.0 9.5 3000 ENGINE / MODEL CC’s Kubota Z602-E4B 599 BURNER 12V DC 3500 Kubota D1105-E4B 1123 12V DC 3000 Kubota D1105-E4B 1123 12V DC 2500 Kubota D1105-E4B 1123 12V DC All Models are Electric Start. 12V battery is required for all models, but is not supplied DESCRIPTION Dual Gun Kit - includes necessary fittings, extra hose gun and wand (Field installed) Steam Kit - includes necessary fittings and panel mount control valve (Field installed) Float Tank Kit - includes float tank, necessary fittings and panel mount detergent metering valve (Field installed) HWE SERIES All Electric Models n All Electric n Belt Drive n Auto / Start Stop n Stainless Steel Coil MODEL PART NO. HWE-402009C 1.109-646.0 HWE-403009C 1.109-647.0 HWE-402009F 1.109-958.0 HWE-403009F 1.109-959.0 OPTIONS PART NO. 8.903-042.0 8.725-157.0 8.725-158.0 GPM PSI 4.0 2000 3.5 3000 3.5 2000 3.5 3000 6.2 7.5 5 7.5 Baldor Baldor Baldor Baldor 55 59 46 49 Pump size comparison: the HFR and HHP pumps from Leuco used in the Super Duty models dwarf the standard HX SERIES & SERIES The Super Skid HSS Series is by far, the largest, most powerful of Hotsy’s hot water pressure washers. The Super Duty HSDS models feature a Hawk pump with lower RPM for long lasting durability; there’s literally nothing else on the market as robust, big & powerful. HSS models come standard with the reliable Hotsy triplex belt-driven high-pressure pump. Triple banded belt for more efficient power transmission. Models are powered by a 16 & 24 HP Kubota engines with electric start and all feature a 3/4-inch foil-backed insulated Schedule 80 heating coil with stainless steel skin and 5-year warranty. Two fuel tanks for longer operation, a high-efficiency Wayne burner and optional dual gun kit allows two users at one time. BTU/HR PUMP MODEL 429,000 HX5843R.2 557,000 HX8043R.2 772,000 HX9536.2 857,000 HX1036R.2 BTU/HR PUMP MODEL 429,000 HHP2750R 557,000 HHP3650R 772,000 857,000 HFR40FR HFR60FR HOSE 50’-3/8” 50’-3/8” 50’-1/2” 50’-1/2” HOSE 50’-3/8” 50’-3/8” 50’-1/2” 50’-1/2” DIMENSIONS SHIP WT (lbs) 73”Lx37”Wx64”H 73”Lx37”Wx64”H 73”Lx37”Wx64”H 73”Lx37”Wx64”H 1305 1710 1715 1715 DIMENSIONS SHIP WT (lbs) 73”Lx37”Wx64”H 73”Lx37”Wx64”H 73”Lx37”Wx64”H 73”Lx37”Wx64”H 1610 2005 2015 2020 The HWE Series is powered and heated by electricity, making it ideal for indoor use. It’s a quiet machine with no fumes, making it ideal for food service and in-plant cleaning. Water is heated in a stainless steel heating coil, immersed in a tank of water solution, allowing for instant hot water once you pull the trigger. The heating elements do not come in contact with the pressurized water, which results in less maintenance and minimizes scale build up. The HWE features a Baldor motor, which drives a belt-drive Hotsy Triplex pump, with 7-year limited warranty, and an insulated variable pressure wand. ETL certified. Float switch is standard on the HWE Series. All models equipped with a 50’ hose. HP MOTOR AMPS VOLT/PH 460/3 460/3 575/3 575/3 KvA HOUR 40.5 40.5 40.5 40.5 BTU/HR PUMP MODEL DRIVE 138,308 138,308 138,308 138,308 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 Belt 34”Lx25”Wx52”H Belt 34”Lx25”Wx52”H Belt 34”Lx25”Wx52”H Belt 34”Lx25”Wx52”H DIMENSIONS SHIP WT 0 (lbs) 620 640 620 640 DESCRIPTION Stainless Steel Washer Wrap 1700 Series (Factory installed) Option, Time Delay Shutdown HWE-402009C (Factory installed)* Option, Time Delay Shutdown HWE-403009C (Factory installed)* Page 8 *Note: Time Delay Shutdown and Auto Start/Stop cannot be combined on the same machine

HOTSY HEATING MODULES & TRAILER 9400 SERIES Heating Modules MODEL 9450 9452 9460 9462 OPTIONS PART NO. 8.903-076.0 8.903-075.0 9.801-040.0 8.717-730.0 8.749-806.0 8.753-171.0 8.749-807.0 PART NO. 1.103-905.0 1.103-906.0 1.103-907.0 1.103-908.0 DESCRIPTION Natural-Gas to LP Conversion for Model 9452 (Factory Installed) Natural-Gas to LP Conversion for Model 9462 (Factory Installed) 10” Natural Gas-Fired Draft Diverter for Model 9452 12” Natural Gas-Fired Draft Diverter for Model 9462 10” Power Dampener 12” Power Dampener Power Dampener Wiring Harness The 9400 Series heating modules give customers the flexibility to “convert” a cold water pressure washer into a hot water unit. By attaching the heating module to a cold water pressure washer the pressurized water is now heated to produce all the benefits of hot water cleaning. The four models use fuel oil, diesel or natural gas to heat the water using Hotsy’s high-efficiency, vertical heating coil. All models are equipped with a flow switch to control the burner. Model 9462 PSI (Max) GPM (Max) GPM (Min) VOLT/PH 3200 3200 3200 3200 10 10 10 10 6 6 6 6 115/1 115/1 115/1 115/1 BTU/HOUR AMP 700,000 540,000 920,000 920,000 8 1 8 1 FUEL Oil-Fired Natural-Gas-Fired Oil-Fired Natural-Gas-Fired DIMENSIONS 32.5”Lx25”Wx50.5”H 32.5”Lx25”Wx50.5”H 40.5”Lx32”Wx65”H 40.5”Lx32”Wx65”H SHIP WT (lbs) 525 500 920 935 Fuel-burner types available: n Diesel n Kerosene n Home Heating Oil n Natural Gas n LP Gas (Optional) Model 9452 Trail Blazer TRAILER n 200 Gallon Water Tank n Single axle rated to 3500 pounds n Swing Away Hinged Tongue n Electric Brakes Shown with 1080BE and optional accessories MODEL TRB-3500 PART NO. GVWR WATER TANK CAPACITY 1.103-818.0 3500 lbs Trailer Dimensions 136” L x 66” W x 52” H OPTIONS (FACTORY INSTALLED) PART NO. DESCRIPTION 8.917-398.0 8.917-554.0 8.917-555.0 8.917-556.0 8.917-557.0 8.917-583.0 8.924-493.0 8.904-051.0 Brakes, Hydraulic High Pressure Hose Reel Low Pressure Hose Reel Saddle Box Kit, set of two Rock Guard Kit Chrome Wheel Rims 2-5/16” Ball Hitch Coupler (adjustable height) Battery Installed on Pressure Washer KITS (FIELD INSTALLED) PART NO. 8.917-559.0 8.917-558.0 8.917-560.0 DESCRIPTION Rock Guard Kit Saddle Box Kit - single box only Utility Rack Kit (150 lb. load capacity) 200 gal GAWR Single 3500 lbs WHEELS 15” White Spoke Wheels ST205/75D15 Tires Trailer Weight: 543 lbs. OPTIONS (FACTORY INSTALLED) PART NO. DESCRIPTION 8.917-290.0 8.917-291.0 8.917-471.0 Assembly Mounting (for 1200 Series)* Assembly Mounting (for 965B, 1075BE, 1080BE Models)* Assembly Mounting (for 1260SS/SSG Models)* *Required when purchasing a pressure washer and trailer package; NOT available for trailer only purchases JACK Swivel Wheel w/Caster Foot JACK BALL CAPACITY COUPLER 1000 lbs 2” The Trail Blazer is Hotsy’s affordable trailer solution that provides mobile cleaning anywhere. Axle assembly with leaf-spring suspension is rated at 3,500 lbs. The heavy dutychassis features a swing-away hinge with swivel jack tongue assembly. The 200 gallon water tank features a float valve and 7-inch access port. 15-inch white spoke wheel assembly. Axle with electric brakes and break-away kit is the standard configuration. Select a trailer and add one of these pressure washer models: 965B 1075BE 1080BE 1200 Series SAFETY CHAINS Dual 5/16” LIGHTING Recessed Lights are DOT approved Shipping Weight: 1043 lbs. (does not include pressure washer) Page 9

HOTSY PRESSURE WASHERS / COLD WATER BD SERIES BELT DRIVE BD Series shown in large cage (4-wheel) version. Small cage 2-wheel version also available. MODEL BD-373539 BD-404029 PART NO. 1.107-021.0 1.107-022.0 BD-405039E* 1.107-023.0 BD-455039E* 1.107-024.0 * E = Electric Start OPTIONS PART NO. DESCRIPTION 8.904-109.0 E-Zee Hose Reel Kit*100’ (small cage) 8.904-110.0 E-Zee Hose Reel Kit*100’ (large cage) * Kit includes hose reel and mounting hardware BX SERIES BELT DRIVE Shown with optional hose reel & mounting kit. MODEL BX-282039 BX-373539 OPTIONS PART NO. PART NO. 1.107-026.0 1.107-028.0 DESCRIPTION 8.929-062.0 Detergent Injector (up to 3 GPM) 9.802-225.0 Detergent Injector (over 3 GPM) GPM PSI 2.8 3.7 ENGINE CC’s 2000 Honda GX160 163 3500 Honda GX390 389 OPTIONS PART NO. GPM PSI 3.7 4.0 4.0 4.5 3500 4000 5000 5000 ENGINE / MODEL Honda GX390 Briggs VAN 16 Honda GX630 Honda GX660 The BD Series is the most rugged cold water pressure washer on the market with its all-steel frame and cage, Hotsy belt-drive, triplex pump and cleaning power of up to 5000 PSI. Four gas models make up what is Hotsy’s most durable cold water line-up ever. All models equipped with a 50’ hose. n Honda or Vanguard engine n Small & Large Roll Cage design n Totally enclosed belt guard n VRT3 Uploader CC’s PUMP MODEL 389 479 688 688 HM4035R.3 HX5843R.2 HX5450R HX5450R FRAME Small Cage Large Cage Large Cage Large Cage n Flat free tires for easy handling n Plated steel high-pressure wand w/ side handle n ETL certified to UL-1776 safety standards DIMENSIONS 42”Lx26”Wx30”H 46”Lx30”Wx36”H 46”Lx30”Wx36”H 46”Lx30”Wx36”H NO. WHEELS SHIP WT(lbs) 2 4 4 4 275 360 417 430 DESCRIPTION 8.904-113.0 5000 PSI Hose Reel Kit,* (large cage) 8.904-115.0 5000 PSI Dual Hose Reel Kit,*† (large cage) † Includes garden hose reel and high-pressure hose reel The BX Series is the similarly rugged, but more compact, line of belt-drive cold water pressure washers. Powered by Honda engines, the BX series delivers cleaning power up to 3500 PSI and an all-steel frame protected by a durable powder coat finish. The Hotsy triplex pumps carry a 7-year limited warranty. Equipped with a 50’ hose. n Honda engines n Totally enclosed belt guard n Flat free tires for easy handling START PUMP MODEL HB3030R Recoil Recoil HM4035R.2 OPTIONS PART NO. FRAME n Insulated steel high-pressure wand w/ side handle n ETL certified to UL-1776 safety standards DIMENSIONS Small Chassis 37”Lx21”Wx24”H Large Chassis 45”Lx26”Wx24”H DESCRIPTION 8.723-636.0 Detergent nozzle 8.904-103.0 EZ Hose Reel Kit 100’ (incl. reel & mounting hardware)* DRIVE SHIP WT (lbs) Belt Belt 152 240 Page 10

HOTSY PRESSURE WASHERS / COLD WATER DB SERIES DIRECT DRIVE MODEL DB-232439 DB-252739 DB-303039 DB-354039 DB-383539 OPTIONS PART NO. PART NO. 1.107-031.0 1.107-032.0 1.107-033.0 1.107-222.0 1.107-034.0 DESCRIPTION 8.904-105.0 EZ Hose Reel Kit 100’ (incl. reel & mounting hardware) GPM 2.3 2.5 3.0 3.5 3.8 PSI 2400 2700 3000 4000 3500 The DB Series is the most compact, affordable alternative, in the cold water line featuring a direct-drive triplex pump. All models are powered by reliable Honda engines. Light-weight design and tubed pneumatic tires make for easy maneuvering. n Honda GX engines n Steel frame n 10”tubed pneumatic tires for easy handling ENGINE / MODEL CC’s Honda GX160 Honda GX200 Honda GX270 Honda GX390 Honda GX390 163 196 270 390 390 DB Series shown with optional hose reel & mounting kit. PUMP MODEL HP2535G HP2535G HP3035G1 HS3540G.3 HS4040G.2 DRIVE Direct Direct Direct Direct Direct n Protected by a powder coat finish n Insulated, 2-piece steel high-pressure wand n ETL certified to UL-1776 safety standards DIMENSIONS 35”Lx21”Wx24”H 35”Lx21”Wx24”H 35”Lx21”Wx24”H 35”Lx21”Wx24”H 35”Lx21”Wx24”H HOSE 50’ 50’ 50’ 50’ 50’ SHIP WT(lbs) 140 145 175 179 179 HAND-HELD COLD WATER PRESSURE WASHER - GAS ENGINE HC SERIES Gasoline-Powered DIRECT DRIVE MODEL HC-232439 PART NO. 1.107-036.0 GPM 2.3 PSI 2400 HOT BOX OIL FIRED n Heater add-on n 3000 PSI n Diesel, kerosene, #1 heating oil n 3/8” QC inlet / outlet The HC Series is the hand-held model of the gasoline-powered line, delivering cleaning capability up to 2400 PSI. The HC is driven by a Honda engine and features a reliable direct-drive triplex pump and is ETL safety certified. n Honda engine n Direct-drive high-pressure pump n Cleaning power up to 2400 PSI ENGINE / MODEL CC’s PUMP MODEL Honda GX160 163 HP2535G DRIVE Direct DIMENSIONS 20”Lx16”Wx17”H n Weighs 80 lbs. n Convenient carrying handle HOSE 25’ SHIP WT(lbs) 95 Add hot water cleaning economically. Portable water heater add-on for existing cold water pressure washers. Quick connect to cold water washer, supply fuel and power to Hot Box for hot water cleaning applications — USE ONLY WHEN NEEDED and keep the convenience of the portable cold water washer. n Efficient vertical combustion n 10” easy-roll tubed pneumatic tires n 5-gallon polyethylene fuel tank MODEL HOT BOX PART NO. 1.103-910.0 n 36’ Ground Fault Interrupter plug n Thermostat temperature control n Compact size — 37” W x 27” L x 39” H DESCRIPTION 5 GPM/3000 PSI - 120V Page 11

HOTSY PRESSURE WASHERS / COLD WATER HD SERIES DIRECT DRIVE BELT DRIVE MODEL HD 3.0/27 G HD 3.5/35 G HD 4.0/40 G PART NO. 9.807-711.0 9.807-712.0 9.807-713.0 HD 4.0/40 Ge 9.807-714.0 HD 3.0/27 GB 9.807-715.0 HD 3.5/35 GB 9.807-716.0 HD 4.0/40 GB 9.807-717.0 HD 4.0/40 GeB 9.807-718.0 OPTIONS PART NO. DESCRIPTION 9.807-750.0 37.5” Handle 9.807-751.0 Handle with Hose Reel 9.807-752.0 Hose Hook GPM PSI 3.0 3.5 4.0 4.0 3.0 3.5 4.0 4.0 2700 3500 4000 4000 2700 3500 4000 4000 The HD Series are our modular cold water pressure washers with corrosion resistant aluminum frame. Wheels can be removed allowing for easy trailer mounting. Models are available in belt or direct drive and powered by Honda GX engines. The HD series features a durable VTR3 unloader with bypass loop, commercial duty pump and a 50’ hose. n Honda GX engines n Modular design convert to skid n VTR3 Unloader with bypass loop ENGINE / MODEL CC’s Honda GX200 Honda GX270 Honda GX390 Honda GX390 Honda GX200 Honda GX270 Honda GX390 Honda GX390 196 270 389 389 196 270 389 389 START PUMP MODEL DRIVE Recoil Recoil Recoil LP3035 Electric Recoil Recoil Recoil Electric OPTIONS PART NO. LP3535G.1 LS4040G.3 LS4040G.3 LP3035G LM3540R.3 LM3840R.3 LM3840R.3 DESCRIPTION 9.807-753.0 Wand Holder 9.807-754.0 Skid Mount Feet (set of 4) Direct Direct Direct Direct Belt Belt Belt Belt n Flat free tires for easy handling n Downstream chemical injection n ETL certified to UL-1776 safety standards DIMENSIONS 41”Lx22”Wx24”H 41”Lx22”Wx24”H 43”Lx26”Wx27”H 43”Lx26”Wx27”H 41”Lx22”Wx24”H 41”Lx22”Wx24”H 43”Lx26”Wx27”H 43”Lx26”Wx27”H HOSE SHIP WT (lbs) 50’ 50’ 50’ 50’ 50’ 50’ 50’ 50’ 112 130 149 158 123 156 160 196 SKID OPTIONS Dealer Assembly Required. Pressure washer sold separately. The perfect accompaniment to Hotsy HD Series pressure washers – these mild steel skids offer two configurations: skid with a 50 gallon water tank and 100’ hose reel OR skid with two 100’ hose reels. The HD Skids fit within a standard UTV / ATV bed when ordering the direct drive models as depicted below. NOTE: Belt drive models extend beyond the frame and are not recommeded. Skid feet included. DESCRIPTION One 100’ Hose Reel & 50 Gal WaterTank Two 100 Ft. Hose Reels PART NO. 9.807-835.0 9.807-840.0 FRAME MATERIAL Mild Steel Mild Steel WATER TANK 50 gallon Not Included HOSE 1 2 COMPATABLE PRESSURE DIMENSIONS REEL WASHER (SOLD SEPERATELY) HD 3.0/27 G 9.807-711.0 HD 3.5/35 G 9.807-712.0 HD 4.0/40 G 9.807-713.0 HD 3.0/27 G 9.807-711.0 HD 3.5/35 G 9.807-712.0 HD 4.0/40 G 9.807-713.0 (L x W x H) INCHES 180 40”L x 48”W x 35”H 40”L x 48”W x 35”H (excluding the pressure washer) 172 (excluding the pressure washer) SHIP WT(lbs) Page 12

HOTSY PRESSURE WASHERS / COLD WATER 1700 SERIES BELT DRIVE MODEL 1710 1720 1722 1723 1724 1725 1726 1743 1744 1745 1746 1753 1754 1755 1756 OPTIONS PART NO. 9.801-031.0 8.904-527.0 9.801-033.0 9.801-034.0 9.801-035.0 8.903-039.0 8.903-040.0 8.903-043.0 8.903-041.0 8.903-045.0 8.903-044.0 8.903-042.0 8.923-421.0 8.903-047.0 PART NO. 1.106-511.0 1.106-512.0 1.106-513.0 1.106-514.0 1.106-515.0 1.106-516.0 1.106-590.0 1.106-529.0 1.106-530.0 1.106-531.0 1.106-591.0 1.106-534.0 1.106-535.0 1.106-536.0 1.106-592.0 1700 SERIES DESCRIPTION Kit, 1700 Wheel w/Chemical Rack (black) Kit, 1700 Wheel w/Chemical Rack (stainless steel) Kit, 1700 Wall Mount Kit, 1700 Floor Stand, Tall (20 3/4”W x 29”D x 36”H) Kit, Caster Wheels for 1700 Floor Stand Kit, Hose Reel w/Bracket for 1700 Stand & Wall Mount Kits Kit, 1700 Floor Stand, Short (20 3/4”W x 29”D x 24”H) Kit, 1700 Wall Mount, Stainless Steel Time Delay Shut Down, For 172x, 173x & 174x Models (Factory Installed) Time Delay Shut Down for 1710 (Factory Installed)* Time Delay Shut Down for 175x Models (Factory Installed) Stainless Steel Base & Cover for 172x, 174x, 175x Models (Factory Installed) Stainless Steel Base & Cover for 1710 Only (Factory Installed) Automatic Stop/Start for 1710 & 172x Models (Factory Installed) * Note: Time Delay Shutdown and Auto Start/Stop cannot be combined on the same machine CWC SERIES BELT DRIVE n Smart Relay Control provides control over run time, auto start/stop and shut down functionality MODEL PART NO. CWC-53 CWC-54 CWC-55 CWC-56 CWC-63 CWC-64 CWC-65 CWC-66 1.106-572.0 1.106-573.0 1.106-574.0 1.106-575.0 1.106-576.0 1.106-577.0 1.106-578.0 1.106-579.0 GPM 4.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 PSI 3000 3000 3000 3000 2000 2000 2000 2000 HP 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 MOTOR RPM 1725 1725 1725 1770 1725 1725 1725 1770 The CWC Series is a completely self-contained stationary, electric-powered, cold water washer with programmable smart control, upstream detergent injector and ETL safety certification. Remote ready for wash bays. All models equipped with a 50’ hose. Ideal for the food industry since hot water can be used. OPTIONS PART NO. 8.924-814.0 8.925-072.0 DESCRIPTION R-Con Wireless Remote Kit (1 remotes/1 receiver) R-Con Wireless Remote Kit (2 remotes/1 receiver) 8.924-878.0 Wall Mount Remote Bracket for R-Con 8.756-329.0 VOLT/PH 230/1 230/3 460/3 575/3 230/1 230/3 460/3 575/3 Page 13 AMP 36 23 11 9 28 18 9 8 PUMP MODEL HOSE HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4035R.3 HM4035R.3 HM4035R.3 HM4035R.3 50’ 50’ 50’ 50’ 50’ 50’ 50’ 50’ Replacement Remote (transmitter only) SHIP WT (lbs) 340 340 340 340 340 340 340 340 GPM 2.8 3.9 3.9 3.9 3.9 3.9 3.9 4.8 4.8 4.8 4.8 5.6 5.6 5.6 5.6 PSI 1000 2000 2000 2000 2000 2000 2000 3000 3000 3000 3000 2500 2500 2500 2500 HP 2 6 6 6 6 6 7.5 10 10 10 10 10 10 10 10 VOLT/PH 120/1 230/1 208/1 208/3 230/3 460/3 575/3 208/3 230/3 460/3 575/3 208/3 230/3 460/3 575/3 AMPS 20 28 30 16 14 7 TBD 31 27 14 TBD 31 27 14 TBD The 1700 Series offers the most reliable stationary, electric-powered, cold water pressure washer featuring a Hotsy belt-drive, triplex pump with 7-year limited warranty, insulated variable pressure wand and ETL safety certification. All models equipped with a 50’ hose. n Baldor electric motor, 2-10 HP n Downstream detergent injector n Insulated SS variable pressure wand Shown with optional stainless steel cabinet PUMP MODEL DRIVE PORTABILITY Optional HB3030R HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4030R.3 HM4035R.3 HM4035R.3 HM4035R.3 HM4035R.3 HX9536R.2 HX9536R.2 HX9536R.2 HX9536R.2 OPTIONS PART NO. 8.903-048.0 8.903-046.0 8.903-617.0 8.903-521.0 Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Belt Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional 1700 SERIES DESCRIPTION Automatic Stop/Start for 175x Models (Factory Installed) Automatic Stop/Start for 173x & 174x Models (Factory Installed) Kit, 1700 Floor Stand, Tall, Stainless Steel Kit, Hose Reel for Wheel Kit 100 ft. (excludes hose) 1700 Series shown with optional hose reel kit, (PN 8.903-039.0), Tall Floor Stand (PN 9.801-034.0), caster wheel kit (PN 9.801-035.0) and stainless steel base and cover (PN 8.903-042.0). Model 1710 shown with optional wheel kit and chemical rack (PN 9.801-031.0). Note - this is not the short stand. DIMENSIONS 31”Lx21”Wx16”H 31”Lx21”Wx16”H 31”Lx21”Wx16”H 31”Lx21”Wx16”H 31”Lx21”Wx16”H 31”Lx21”Wx16”H 31”Lx21”Wx16”H 31”Lx21”Wx16”H 31”Lx21”Wx16”H 31”Lx21”Wx16”H 31”Lx21”Wx16”H 31”Lx21”Wx16”H 31”Lx21”Wx16”H 31”Lx21”Wx16”H 31”Lx21”Wx16”H SHIP WT(lbs) 200 275 240 250 250 250 TBD 302 300 315 TBD 320 310 310 TBD n Hot Water Seal Kit standard n Option-ready for Time Delay Shutdown or Auto Start/Stop

HOTSY PRESSURE WASHERS / COLD WATER HD SERIES Electric-Cart DIRECT DRIVE MODEL HD 1.9/13 Ed HD 2.0/10 Ed HD 3.0/10 Ea HD 3.5/20 Ea OPTIONS PART NO. PART NO. 9.801-798.0 9.801-797.0 9.801-799.0 9.801-800.0 HD SERIES DESCRIPTION 9.807-754.0 Skid Feet 9.807-750.0 37.5” Long Handle BDE SERIES BELT DRIVE MODEL BDE-505009B BDE-505009C OPTIONS PART NO. PART NO. 1.107-085.0 1.107-086.0 DESCRIPTION 8.904-110.0 E-Zee Hose Reel Kit*100’ (large cage) * Kit includes hose reel and mounting hardware GPM PSI 5.0 5.0 5000 5000 1765 1765 GPM 1.9 2.0 3.0 3.5 PSI 1300 1000 1000 2000 HP 2 1.5 2 5 120/1 120/1 120/1 230/1 The HD Series electric carts are corrosion-resistant aluminum cold water pressure washers that easily convert from a cart to a skid for maximum cleaning versatility. Low profile handle and compact footprint. Includes bypass loop for additional pump protection. n Aluminum frame n Converts easily to skid style frame n Flat free tires for easy handling VOLT/PH MOTOR RPM AMPS PUMP MODEL LF2030S LF2030S LF2830S LF3530F 1725 1725 1725 3450 20 15 20 22 OPTIONS PART NO. n Downstream chemical injection n ETL safety certification DIMENSIONS 35”Lx21”Wx24”H 35”Lx21”Wx24”H 35”Lx21”Wx24”H 35”Lx21”Wx24”H HD SERIES DESCRIPTION 9.807-752.0 Hose Storage Hook 9.807-753.0 Wand Holder HOSE 50’ 50’ 50’ 50’ SHIP WT(lbs)1 196 212 219 220 The BDE Series is the electric equivalent of the BD Series. Hotsy belt-drive, triplex pump and cleaning power of 5000 PSI. Both models feature the large cage frame and are equipped with a 50’ hose. n 1765 RPM Motor n Totally enclosed belt guard n 12’ cord length n NEMA 4-Electrical Box 230/3 460/3 48 26 HX5450R HX5450R 1650 1650 n Flat-free tires for easy handling n Plated steel high-pressure wand w/ side handle n ETL certified to UL-1776 safety standards HP MOTOR RPM VOLT/PH AMPS PUMP MODEL PUMP RPM HOSE 20 20 OPTIONS PART NO. DIMENSIONS 50’ 46”Lx30”Wx36”H 50’ 46”Lx30”Wx36”H DESCRIPTION 8.904-113.0 5000 PSI Hose Reel Kit,* (large cage) 8.904-115.0 5000 PSI Dual Hose Reel Kit,*† (large cage) † Includes garden hose reel and high-pressure hose reel HAND-HELD COLD WATER PRESSURE WASHER - ELECTRIC ET SERIES Electric-Powered DIRECT DRIVE MODEL ET-301109D OPTIONS PART NO. PART NO. 1.106-107.0 ET-201409DX2 1.107-089.0 ET SERIES DESCRIPTION 8.920-952.0 Wall Mount Bracket GPM 3.0 1.8 PSI 1000 1400 HP 2.0 2.0 115/1 115/1 The ET Series is the hand-held model of the electric-powered line, delivering cleaning capability up to 1400 PSI. The ET features a reliable direct-drive triplex pump and is ETL safety certified. n 1725 RPM Motor n Direct-drive high-pressure pump n 25’ & 50’ hose n Convenient carrying handle Note: Detergent Injector Sold Separately VOLT/PH PUMP MODEL HF2830S HF2030S DRIVE Direct Direct OPTIONS PART NO. DIMENSIONS 20”Lx19”Wx17”H 20”Lx19”Wx17”H ET SERIES DESCRIPTION 8.929-062.0 Detergent Injector (up to 3 GPM) Page 14 n Remote switch with 10’ cord (ET-201409DX2 only) n Accepts incoming hot water up to 180o F n Standard auto start/stop (ET-201409DX2 only) HOSE 50’ 25’ SHIP WT(lbs) 121 123 SHIP WT(lbs) 524 524

HOTSY HEATERS HEAT MIZER HEAT SERIES n Radiant Portable Heaters n Uses Kerosene, Diesel #1, Diesel #2 or Jet Fuel MODEL HEATMIZER 115 HEATMIZER 155 OPTIONS PART NO. 8.755-314.0 8.755-315.0 8.755-335.0 PART NO. 1.103-078.0 1.103-079.0 DESCRIPTION Thermostat 20-120oF w/30’ Cable w/90o Plug Preheated Fuel Filter (for model 155) Fuel Level Gauge BTU/HR 115,000 155,000 VOLT/PH 120V/1 120V/1 Note: Heaters have limited seasonal availability The HeatMizer Heaters are portable, radiant heaters offering clean combustion with 99.9% efficiency. Using direct heat flow by radiation, there’s very little air movement. Ideal for warming areas where workers are cleaning, constructions sites, animal pens and curing concrete. Features a metallic forced air insulation pocket between the combustion chamber and the external protection cone, which keeps the cone cool to the touch. n Patented triple cone design n Low noise level n Extendable sliding floor shield AMP RATING 2.15 4.1 TANK CAPACITY (GAL) 11.35 17.2 RUN TIME (HR) 13.4 16 n Automatic post-ventilation cooling cycle n Air pressure switch safety device n CSA Approved DIMENSIONS 30”Lx23”Wx28”H 41”Lx28”Wx43”H DRY WT(lbs) 92 161 REDHOT CANNON HEAT SERIES n Indirect-Fired n Uses Kerosene, Diesel #1, Diesel #2 or Jet Fuel n Can be used indoors and ducted MODEL REDHOT CANNON 100 REDHOT CANNON 200 REDHOT CANNON 300 OPTIONS PART NO. DESCRIPTION 8.755-316.0 Fuel Level Gauge (for HeatCannon 100) 8.755-317.0 Fuel Level Gauge (for HeatCannon 200/300) 8.755-318.0 Fuel Tank Filter 8.755-319.0 4 Lifting Brackets 8.755-320.0 Single Fuel Line Kit 8.755-321.0 12” 1-Way Duct Adapter (for model 100) 8.755-322.0 14” 1-Way Duct Adapter (for model 200) 8.755-323.0 16” 1-Way Duct Adapter (for model 300) PART NO. 1.103-075.0 1.103-076.0 1.103-077.0 BTU/HR TEMPERATURE RISE (@64oF) 94,759 183,362 258,704 95 136 126 The RedHot Cannon Heaters are diesel indirect-fired portable heaters use an embedded burner with combustion air obtained from the main ventilation fan. Models feature a heat exchanger which contains the flame and expels fumes through a chimney which can be connected to the outside. Four pass heat exchange technology allows exhaust gases to increase heat exchange with the cooling air, and obtain maximum thermal efficiency. n Air pressure switch safety device n Auto post ventilation cooling cycle VOLT/PH 120V/1 120V/1 120V/1 AMP RATING 4.05 7.65 11.80 OPTIONS PART NO. TANK 17.2 27.7 DESCRIPTION 8.755-324.0 12” 2-Way Duct Adapter (for model 200) 8.755-325.0 12” 2-Way Duct Adapter (for model 300) 8.755-314.0 Thermostat 20-120oF w/30’ Cable w/90o Plug 8.755-327.0 External Fuel Tank Connection Kit 8.755-328.0 External Fuel Tank Connection Kit w/Deaerator (Tiger Loop) 8.755-329.0 Preheated Fuel Filter (for model 100) 8.755-330.0 12” x 20’ Flexible Air Duct 8.755-331.0 14” x 20’ Flexible Air Duct 8.755-332.0 16” x 20’ Flexible Air Duct n 6-inch flue size n CSA Approved RUN CAPACITY (GAL) TIME (HR) 11 14 14 13 DIMENSIONS DRY WT(lbs) 46”Lx20”Wx28”H 52”Lx20”Wx38”H 67”Lx25”Wx42”H 143 238 330 Page 15

HOTSY BRANDED PARTS HOTSY Guns Designed exclusively for Hotsy to meet the demands of the high pressure cleaning professional. • PSI: 5000 • GPM: 10.5 • Temperature: 320°F • 3/8” FPT inlet x 1/4” FPT outlet • Weight: 20 oz Part No. 8.751-235.0 8.751-119.0 Description Hotsy Gun Hotsy Gun Repair Kit • PSI: 3750 • GPM: 12 • Temperature: 300°F • 3/8” FPT inlet x 1/4” FPT outlet • Weight: 24 oz Part No. 8.711-345.0 8.717-658.0 Original No. 860447 877471 Description Hotsy Gun Hotsy Gun Repair Kit • PSI: 4500 • GPM: 10 • Temperature: 300°F • 3/8” FPT inlet x 1/4” FPT outlet • Weight: 26 oz Part No. 8.711-346.0 8.717-660.0 Original No. 691867 753179 HOTSY Lance Grip • Easily fastened to any 1/4” wand • 12” in length • Zytel material for long life Part No. 8.717-661.0 Original No. 859762 Description 12” Insulated Grip HOTSY Side Handle Side handle easily adjusts to provide a safe, ergonomic addition to any straight Lance. • Easily attaches to metal lances • Fits 1/4” lances Part No. 9.802-214.0 8.711-272.0 Part No. 8.706-670.0 Original No. 859763 Description Wand Side Handle Original No. Description 936701 768391 36” Lance w/ Side Handle 48” No Side Handle, 4000 PSI • PSI: 3000 • 1/4” plated steel pipe • 1/4” threads Description Hotsy Gun Hotsy Gun Repair Kit Part No. 8.711-274.0 8.752-893.0 8.904-324.0 8.725-389.0 8.725-388.0 8.752-896.0 8.752-897.0 Original No. 936610 8.711-314.0 8.711-315.0 8.711-313.0 8.717-662.0 8.711-316.0 8.717-268.0 HOTSY Dual Lance The Hotsy dual lance simply out classes the competition. 35” and 48” length to meet UL Standards. Designed specifically for Hotsy to our specifications. • PSI: 3000 • Temperature: 220°F • For use with downstream injection • Detergent control side handle Part No. Original No. 878912 878913 878911 877600 878918 861420 Description 35” Cold Water 35” Hot Water w/ Grip 48” Hot Water w/ Grip Repair Kit Brass Body Handle, Valve HOTSY Hot Water Lance Hotsy quality through and through. Superior heat protection with zytel insulated grips. • PSI: 4000 • Temperature: 220°F • 1/4” plated steel pipe • 1/4” threads • Zytel insulated grips Description 15” Lance w/ Grip 28” Lance w/ Grip 36” Lance w/ Nozzle Protector 36” Lance w/ Grip & Side Handle 48” Lance w/ Grip & Side Handle 60” Lance w/ Grip 79” Lance w/ Grip HOTSY Cold Water Lances Page 16

HOTSY BRANDED PARTS Hotsy High-Pressure Hose For use with hot or cold-water pressure washers Introducing the new Hotsy R1 and R2 high-pressure hose. The R1 and R2 hose is built to exceed the EN1829-2 Standard and will provide superior abrasion reistance that will increase the life of the hose. The R1 and R2 hose is rated up to 250°F and is available in 4000, 5000 and 6000 PSI. Both single-and double-wire braid hoses come with durable bend restrictors on both ends, with a 24-inch bend restrictor on the gun end for added operator protection against high-pressure bursts. The R1 and R2 hose has a “bite-the-wire” coupling that grips the hose better than any other design. Part No. Size 25’ 50’ 75’ ID 3/8” MPT Swivel x 3/8 MPT Swivel 8.925-151.0 8.925-157.0 8.925-162.0 8.926-166.0 8.925-171.0 8.925-353.0 8.925-379.0 8.926-443.0 100’ 150’ 200’ 3/8 3/8 3/8 3/8 3/8 3/8 (75) 50’ 3/8 (40) 100’ 2/8 3/8” MPT Swivel x 3/8 MPT Solid 8.926-174.0 8.926-373.0 8.926-352.0 50’ 100’ 200’ 3/8 3/8 3/8 Hotsy R1 1-Wire 4000 PSI Hose • Hotsy branded bend black restrictor • Smooth impression oil resistant tube and cover with black hose guard, both ends • Rated to 250°F Temp 250°F 250°F 250°F 250°F 250°F 250°F 250°F 250°F 250°F 250°F 250°F Fittings SWxSW SWxSW SWxSW SWxSW SWxSW SWxSW SWxSW SWxSW SWxSO SWxSO SWxSO Hotsy R2 1-Wire 5000 PSI Hose Size Part No. n Temperature Rating: R1 and R2 hoses are rated for continuous temperatures up to 250°F. n Easily Identified: Permanently embossed identification makes for easy tracing and owner protection. n Certified Burst Protection: R1 and R2 hose meets the stringent UL-1776 safety standards with two hose guards—including a 24-inch sleeve on the gun end—for added operator protection against bursts. n Unique Coupling: A “bite-the-wire” coupling actually reaches the wire braid for never-slip retention, far superior to the “compression” fittings used on conventional hoses. Part No. Size 25’ 50’ 75’ ID 3/8” MPT Swivel x 3/8 MPT Swivel 8.925-181.0 8.925-185.0 8.925-226.0 8.925-230.0 8.925-233.0 8.925-372.0 8.925-383.0 8.925-444.0 100’ 150’ 200’ 3/8 3/8 3/8 3/8 3/8 3/8 (75) 50’ 3/8 (40) 100’ 3/8 3/8” MPT Swivel x 3/8 MPT Solid 8.925-374.0 8.925-375.0 8.925-371.0 50’ 100’ 200’ Page 17 3/8 3/8 3/8 50’ 75’ ID 1/2” MPT Swivel x 3/8 MPT Solid 8.925-242.0 8.925-248.0 8.925-250.0 100’ 1/2 1/2 1/2 Temp 250°F 250°F 250°F Fittings SWxSO SWxSO SWxSO Hotsy R2 2-Wire 6000 PSI Hose • Hotsy branded bend black restrictor • Smooth impression oil resistant tube and cover with black hose guard, both ends • Rated to 250°F Temp 250°F 250°F 250°F 250°F 250°F 250°F 250°F 250°F 250°F 250°F 250°F Fittings SWxSW SWxSW SWxSW SWxSW SWxSW SWxSW SWxSW SWxSW SWxSO SWxSO SWxSO PSI 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 PSI 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 PSI 5000 5000 5000

HOTSY BRANDED PARTS Tuff-Flex 1-Wire 3000 PSI Blue Non-Mar Hose • Hotsy branded black bend restrictor • Smooth, maximum oil resistant tube blue non-marking cover. • 20% greater flexibility • 7 times greater abrasion resistance • 3/8” MPT Swivel x 3/8” MPT Swivel Part No. 8.739-121.0 8.739-123.0 Size 50’ 100’ ID 3/8 3/8 Tuff-Flex 2-Wire 4500 PSI Blue Non-Mar Hose • Hotsy branded red bend restrictor • Smooth, maximum oil resistant tube blue non-marking cover. • 20% greater flexibility • 7 times greater abrasion resistance • Built to SAE 100R1AT OD dimensions • 3/8” MPT Swivel x 3/8” MPT Swivel Part No. 8.739-198.0 8.739-200.0 Size 50’ 100’ ID 3/8 3/8 Temp 250°F 250°F PSI 4500 4500 Color Blue Blue Fuel Filter/Water Separator • 10 micron filtration • Spin-on convenience • Water separation chamber • 1/4” FPT inlet/outlet • Easy drain water/sediment bowl Part No. 8.749-771.0 8.749-770.0 Touch-Up Paint • Matches the color on your Hotsy • Comes in aerosol or dab/brush Part No. 8.720-519.0 8.723-214.0 Original No. 910215 503.088 Description 12 oz Aerosol - Red 12 oz Aerosol - APW Gray NOTE: Aerosol containers cannot ship UPS Air Description Complete Unit Element Temp 250°F 250°F PSI 3000 3000 Color Blue Blue Part No. 8.717-710.0 8.717-711.0 Original No. 851084 875490 Description Filter, Fuel/ Oil Water Separator Replacement Screen • Extends life of fuel system • Clear sediment bowl and washable screen • Drain valve • Filters gasoline and diesel fuel HOTSY Fuel Filter/ Water Separator Page 18

HOTSY BRANDED PARTS Hotsy Hose Reels Fully assembled and ready to use! Hotsy hose reels were designed for ease of use and durability in commercial pressure washer applications. Offering 100' and 200' reels in both a fixed base and 360 degree rotating base. The oversized reel holds the advertised length plus leaves additional space reducing the difficulty of reeling hose. The unique extended swivel improves the hose connection and reduces hose wear and stress. Features: 1. Rugged heavy-duty construction for commercial applications. • Heavy gauge steel fabrication with durable handle • Gloss black powder coating • Easy to use brake mechanism reduces unwinding backlash • Oversized heavy-duty locking mechanism prevents slippage during reel operation. 2. “Flip-Over” hose guide: Allows ease of use from either side of the reel 3. Oversized: Oversized to easily fit the advertised length of hose. When we say 100' we mean 100+ feet will easily fit. 4. Swivel design: The reels come with an extended swivel which prevents bends and stress on the hose where it attaches to the reel. 5. Rotary mount: 360 degree rotation with an oversized heavy-duty locking mechanism. Allows for continual alignment with the hose. • Mount to round or square tubing 6. Fully assembled: Ready to use out of the box. Saves time and money. 7. 2-year warranty on the swivel Bracket Sockets 360° Pivot Reel Part No. 8.750-486.0 8.750-483.0 8.750-478.0 8.750-481.0 Part No. 8.919-430.0 8.919-794.0 Specifications: • 5000 PSI • 325°F • 100' and 200' fixed base • 100' and 200' 360 degree rotating base • High pressure double seal swivels. Fixed Base Hose Reel Description Pivot Reel Pivot Reel Fixed Based Fixed Based NOTE: Hose not included Description Universal Mount* Skid Mount* 8.919-437.0 Wall Mount* 8.919-434.0 8.919-072.0 8.919-445.0 8.919-441.0 8.919-448.0 Non-Pivot Reel Brackets Base Mount* Bracket, Universal* Bracket, 90°* Bracket, 45°* Bracket, Vertical* Length 100' x 3/8" 200' x 3/8" 100’ x 3/8" 200' x 3/8" Universal Mount Skid Mount Wall Mount Fixed Base Hose Reels & Mounting Bracket Options Connector Hot Water Electric Models 555SS 560SS 680SS 790SS 795SS 795SS-208 895SS 800 Series Hose* 8.901-464.0 (4 ft) 8.901-472.0 (6 ft) 8.901-464.0 (4 ft) 8.901-464.0 (4 ft) 8.901-464.0 (4 ft) 8.901-464.0 (4 ft) 8.901-464.0 (4 ft) 8.901-472.0 (6 ft) Base Mount Universal 90° 45° Vertical Bracket #1 45 Arm o Bracket #2 90 Arm o 8.919-441.0 8.919-441.0 8.919-441.0 8.919-441.0 8.919-441.0 8.919-441.0 8.919-441.0 8.919-441.0 8.919-445.0 8.919-445.0 8.919-445.0 8.919-445.0 8.919-445.0 8.919-445.0 8.919-445.0 8.919-445.0 Bracket #3 Vertical Arm 8.919-448.0 8.919-448.0 8.919-448.0 8.919-448.0 8.919-448.0 8.919-448.0 8.919-448.0 8.919-448.0 Hotsy 360° Pivot Hose Reels & Connector Hose Options NOTE: Models come standard with pivot reel receptacle - no additional bracket is required. Pressure washer hose not included Hot Water Electric Models 555SS 560SS 680SS 790SS 795SS 795SS-208 895SS 800 Series Connector Hose* *Required to connect hose reel to pressure washer. 8.901-460.0 (3 ft) 8.901-464.0 (4 ft) 8.901-464.0 (4 ft) 8.901-464.0 (4 ft) 8.901-464.0 (4 ft) 8.901-464.0 (4 ft) 8.901-464.0 (4 ft) 8.901-472.0 (6 ft) Page 19

HOTSY BRANDED PARTS Hotsy Stackable Hose Reels & Accessories Patent-pending hose reels built specifically for contractors who require flexibility on a job site. Stackable reels are supported on both sides of the central hub to accommodate more aggressive applications, such as trailer-mounted. *Patent D739,715S and other Patents Pending 200' Mild Steel 100' Mild Steel Ready-Stack Hose Reel Ready-Stack Hose Reel n Reel and swivel rated up to 6000 PSI and 350°F n Integrated frame adds protection and stacking ability n Accommodates hose lengths of up to 100' or 200' n Ideal for stacking on a trailer n Heavy-duty powder-coated steel or stainless steel n Modular design allows user to configure to meet various needs n Reversible hand-crank and swivel Stainless Steel Ready-Stack Hose Reel Hose Reel Riser feeds hose over and around obstacles Hose Guide directs hose back onto reel for a more uniform fit Reel Cart System helps to easily move multiple hoses and reels where needed Part No. 9.801-775.0 9.801-776.0 9.801-777.0 9.801-778.0 8.923-415.0 8.923-427.0 8.923-918.0 8.923-416.0 Description 100’ Mild Steel Hose Reel 200’ Mild Steel Hose Reel 100’ Stainless Steel Hose Reel 200’ Stainless Steel Hose Reel 100’ Hose Guide 200’ Hose Guide Wheel Cart Riser Configured 200' Mild Steel Stackable Hose Reel with Optional Hose Guide and Hose Reel Riser Configured 200' Mild Steel Stackable Hose Reels with Optional Reel Cart System and Hose Guide Page 20

HOTSY BRANDED PARTS HOTSY Nozzles 1/4” male pipe thread nozzles, rated up to 5100 PSI. Hardened stainless steel nozzle insures consistent, accurate orifice size. Nozzle Size 1/4” Nozzle 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 12 15 20 40 0° Part No. 8.711-375.0 8.711-383.0 8.711-389.0 8.711-396.0 8.711-404.0 – 8.711-416.0 8.711-422.0 8.707-723.0 8.711-427.0 8.711-434.0 – 8.711-447.0 8.707-795.0 – HOTSY Adjustable Fan Nozzle 3000 maximum PSI, Vari-fan nozzle easily adjusts from 0° to 80° fan size with a simple twist of the nozzle head. Part No. • 3000 PSI • 300°F • 1/4” inlet 8.712-400.0 8.712-401.0 8.712-407.0 8.712-402.0 8.712-408.0 Orig No. 799100 799101 799102 799103 799104 HOTSY High / Low Adjustable Fan Nozzle All the features of the variable fan nozzle. Plus with a pull, nozzle lowers pressure for chemical application. Part No. • 3000 PSI • 200°F • Low pressure soap injection • 1/4” inlet Hotsy Nozzle Protector • Fits 1/4” lances • Protects nozzles from damage 8.717-576.0 8.717-570.0 8.717-571.0 8.712-404.0 8.717-572.0 8.712-403.0 Orig No. 799169 799107 799108 799109 799110 799111 Orifice 3.0 3.5 4.0 4.5 5.0 5.5 Part No. 8.717-575.0 8.717-573.0 8.717-574.0 8.717-691.0 Orig No. 799124 799112 799113 753113 Orifice 6.0 6.5 7.5 Repair Kit Orifice 3.5 4.0 4.5 5.0 5.5 Part No. 8.712-406.0 8.717-569.0 8.712-410.0 8.717-690.0 Orig No. 799119 799105 799106 753112 Orifice 6.0 6.5 7.5 Repair Kit Orig. No. 900850 900854 900842 900858 900861 – 900894 900898 727742 900917 900929 – 900376 727752 – 0° Part No. 8.711-377.0 8.711-385.0 8.711-392.0 8.711-398.0 8.711-406.0 8.711-412.0 8.711-417.0 8.711-423.0 8.711-424.0 8.711-429.0 8.711-435.0 8.707-766.0 8.711-448.0 8.711-452.0 8.707-824.0 15° Orig. No. 900851 900847 900843 900859 900862 900800 900895 900899 900903 900918 900930 727786 900377 900422 900991 40° Part No. 8.711-380.0 8.711-388.0 8.711-395.0 8.711-402.0 8.711-411.0 8.711-414.0 8.711-419.0 – 8.711-426.0 8.711-432.0 8.711-438.0 8.707-768.0 8.707-790.0 8.707-804.0 – 40° Orig. No. 900852 900848 900844 900860 900864 900801 900896 – 900905 900920 900932 251435 799206 900973 – Part No. 8.717-320.0 Original No. 918392 Description 1/4” Nozzle Protector Page 21

HOTSY BRANDED PARTS HOTSY Twist Quick Couplers • Precision brass design • Unrestricted free flow • 4000 PSI max Swivels, designed for 4000 PSI and extended durability. Affordable and rugged all in one. Original No. Part No. Original No. 8.717-562.0 826301 8.707-189.0 826300 8.717-568.0 826304 Description 1/4” FNPT 3/8” FNPT 1/2” FNPT Part No. 8.717-561.0 8.717-560.0 8.717-567.0 826303 826302 826305 • Zinc plated • Hardened steel • 4000 PSI max Zinc Plated Nipples, hardened steel combined with zinc yellow chromate plating holds up to the harshest environments. Part No. 8.717-564.0 8.707-187.0 8.717-566.0 Original No. 826291 826290 826294 Description 1/4” FNPT 3/8” FNPT 1/2” FNPT Replacement O-rings, for HOTSY twist coupler, Buna-n. Original No. Part No. 8.717-230.0 926660 Two-Gun Tee Coupler Two-Gun Tee Coupler makes switching from one gun to two a snap. 3/8” quick coupler fittings good up to 4000 PSI. • For use with dual gun systems • Couples onto outlet nipple • 3/8” couplers Description Replacement O-ring Adjustable Nozzle Compact full feature unit weighs only 4.3 oz., same functions as ST-51N. • 3600 PSI • 10 GPM • 300°F • Machined brass body Part No. Original No. 8.902-421.0 2-2014 Description Two Gun Splitter Color-Coded 1/4" QC Nozzle Kits Available in kits or individually. n Hardened SS one piece body for long life n High impact, uniform, flat spray pattern n Color-coded by spray angle n Rated up to 4000 PSI n 4-pack includes 0°,25°,40°, soap nozzles n 5-pack includes 0°,15°,25°,40°, soap nozzles Part No. 4-pk 8.726-117.0 9.104-028.0 8.726-119.0 8.726-120.0 8.726-121.0 8.726-122.0 8.726-123.0 8.726-124.0 8.726-125.0 Nozzle Size 3.0 3.25 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Part No. 5-pk 9.104-024.0 9.104-016.0 8.726-128.0 9.104-030.0 8.726-130.0 8.726-131.0 8.726-132.0 8.726-133.0 8.726-134.0 Page 22 Part No. 8.712-411.0 ST-56 Rollover Nozzle Head Part No. 9.802-950.0 Original No. 900260 Description Adjustable Nozzle • Brass body • 3600 PSI • 8 GPM • 300°F Original No. 901183 Description Rollover Nozzle Head • Glass-filled polyamide cover • 1/4” FPT inlet & outlet • Nylon adjustment knob • 1/4 FPT inlet/outlet Part No. 8.717-563.0 8.707-188.0 8.717-565.0 Original No. 826293 826292 826295 Description 1/4” MNPT 3/8” MNPT 1/2” MNPT Description 1/4” MNPT 3/8” MNPT 1/2” MNPT

HOTSY BRANDED PARTS The HOTSY Pump - Engineered for durability and performance. Provides 3 times longer seal life. TM Hotsy Pumps featuring NESTechnology™ What is NESTechnology™? It stands for Nested Seal Technology, where the pump actually “nests” the seals of the pump’s highpressure packing assembly in place, supporting the side walls, and resulting in greatly increased seal life. The unique technology of the nesting assembly includes new high and low-pressure U-shaped seals surrounded by thicker brass pressure rings. This provides better wall support while withstanding higher water temperatures. This results in Hotsy pumps having 3 times the seal life over similar pumps in the industry. • Extended time between seal replacement, greatly reducing maintenance costs. • Teflon bronze rings support the U-Seal to prevent premature wear and loss of pressure. • The low-pressure U-Seal has a unique double lip to provide for greater suction and less chance of water leakage. • Increased wall thickness of the brass pressure rings resist cracking and provide a solid foundation for the seals. • The nesting assembly is stronger and holds up better to spikes in water pressure, which occur every time the gun is triggered. • Existing Hotsy pumps can be upgraded to utilize NESTechnology’s unique nesting assembly. All parts are interchangeable, and fit within the brass manifold. • Seals are rated for temperatures up to 185o F. Seals are a wear item in a pump because of the intense pressure they are subjected to. Hotsy ’s nested seal technology holds up better, and has improved the seal life by changing the geometry of the packing assembly and providing greater support to the seals. The end result is a high-performance pump with extended service life. Nesting Assembly Cross Section View: “U” Seal Assembly (Shown Installed) Ceramic Piston Pump Head Crankcase Housing Nested “U” Seal (High Pressure) Nested “U” Seal (Low Pressure) Page 23

HOTSY BRANDED PARTS The Hotsy Pump’s rugged design features many benefits: • Oversized crankshaft and connecting rods • Heavy-duty roller bearings or heavy-duty tapered roller bearings • Four frame sizes: one duplex, and three triplex sizes - small, medium, large • Externally accessible check valves • Two inlet and discharge ports facilitate system installation • Anodized aluminum crankcase • Polished ceramic plungers reduce seal wear • Internally-ported, self-lubricating seals • Pumps available for pulley, direct or gear-reducer drive • 7-year warranty on the oil-end of the pump Oil level sight glass Anodized aluminum crankcase Oversized connecting rods Oil level dipstick Externally accessible check valves Oversized crankshaft One-piece forged brass manifold Stainless steel plunger rod Ceramic plungers Close Up of how the Nested U-Seals are supported within the brass manifold The heart of NESTechnology™ - Durable fiberimpregnated U-Seals with brass supported by Dupont Delrin and Teflon Bronze support rings featuring Dual inlet & outlet ports TM DUPLEX SERIES: Direct Drive Part No. DUPLEX 8.904-909.0 8.904-915.0 8.715-243.0 Model/Orig. No. HHC165L.1 HHC165R.1 HHC168R.1 GPM PSI 2.2 2.2 2.2 1500 1500 1500 HP 2.3 2.3 2.3 RPM 1725 1725 1725 Shaft 5/8” Hollow 5/8” Hollow 5/8” Hollow Weight 13 lbs 13 lbs 13 lbs Page 24

HOTSY BRANDED PARTS HOTSY Pumps (continued) HS.3 SERIES: Direct Drive Part No. HS.3 8.751-182.0 8.751-183.0 8.751-184.0 8.751-185.0 Model HS3040G.3 HS3540G.3 HS4040G.3 HS5030G.3 GPM 3.0 3.5 4.0 5.0 PSI 4000 4000 4000 3000 HP 11.5 13.5 15.4 15.4 RPM 3400 3400 3400 3400 Shaft 1” Hollow 1” Hollow 1” Hollow 1” Hollow Weight 23 lbs 23 lbs 23 lbs 23 lbs HP SERIES: Direct Drive Part No. HP 8.923-771.0 8.923-772.0 8.923-773.0 8.923-774.0 8.923-775.0 Model/Orig. No. GPM HP2535G HP3035G HP3035G1 HP3535G1 HP4035G1 2.5 3.0 3.0 3.5 4.0 PSI 3500 3500 3500 3500 3000 HP 6.0 7.2 7.2 8.4 9.6 RPM 3400 3400 3400 3400 3400 Shaft Weight 3/4” Hollow 3/4” Hollow 1” Hollow 1” Hollow 1” Hollow 16.75 lbs 16.75 lbs 18 lbs 18 lbs 18 lbs HF SERIES: Direct Drive Part No. HF 8.923-776.0 8.923-777.0 8.923-778.0 8.923-779.0 8.923-780.0 8.928-275.0 Model/Orig. No. HF2030F HF2030S HF2830F HF2830S HF3530F HF2030SL GPM 2.1 2.1 2.8 2.8 3.5 2.1 PSI 3000 3000 3000 3000 3000 3000 HP 4.3 4.3 5.8 5.8 7.2 4.3 RPM 3450 1725 3450 1725 3450 1725 Shaft 5/8” Hollow 5/8” Hollow 5/8” Hollow 5/8” Hollow 5/8” Hollow 5/8” Hollow Weight 17 lbs 17 lbs 17 lbs 17 lbs 17 lbs 17 lbs FasPump Quick Change Pump Assemblies Includes a pump, uploader, thermal protector, by-pass loop hose, garden hose inlet with filter, and quick connect plug, making them easy to install. Part No. Description 8.924-434.0 Pump Assy, LP3035G, Direct, 3.0 GPM, 3500 PSI, 3.4” Hollow Shaft, 3400 RPM, VTR3 8.924-435.0 Pump Assy, LP3535G1, Direct, 3.5 GPM, 3500 PSI, 1” Hollow Shaft, 3400 RPM, VTR3 8.924-436.0 Pump Assy, LS4040G.3, Direct, 4.0 GPM, 4000 PSI, 1’ Hollow Shaft, 3400 RPM, VTR3 8.924-437.0 Pump Assy, LB3030R, Belt, 3.0 GPM, 3000 PSI, 24mm Solid Shaft, 1650 RPM, VTR3 8.924-438.0 Pump Assy, LM3540R.3, Belt, 3.5 GPM, 4000 PSI, 24mm Solid Shaft, 1850 RPM, VTR3 8.924-439.0 Pump Assy, LM3840R.3, Belt, 3.8 GPM, 4000 PSI, 24mm Solid Shaft, 1740 RPM, VTR3 Page 25

HOTSY BRANDED PARTS HOTSY Pumps (continued) HX SERIES: Belt Drive Part No. HX 8.920-583.0 8.920-584.0 8.920-585.0 8.920-586.0 8.920-587.0 8.920-588.0 HB SERIES: Belt Drive Part No. HB 8.923-767.0 8.923-768.0 8.923-769.0 8.923-770.0 Model/Orig. No. HB3030R HB3030L HB4025R HB4025L GPM 3.0 3.0 4.0 4.0 PSI 3000 3000 2500 2500 HP 6.2 6.2 6.8 6.8 RPM 1650 1650 1550 1550 Shaft 24mm 24mm 24mm 24mm Weight 14.5 lbs 14.5 lbs 14.5 lbs 14.5 lbs Model/Orig. No. HX5843R.2 HX8043R.2 HX9536R.2 HX9536L.2 HX1036R.2 HX1036L.2 GPM 5.8 8.0 9.5 9.5 10.4 10.4 PSI 4350 4350 3625 3625 3625 3625 HP 17.3 23.8 16.4 23.6 23.6 25.8 RPM 1740 1740 1740 1740 1740 1740 Shaft 25mm Right 25mm Right 25mm Right 25mm Left 25mm Right 25mm Left Weight 38 lbs 38 lbs 38 lbs 38 lbs 38 lbs 38 lbs HX5450 SERIES: Belt Drive Part No. 8.921.659.0 8.921.660.0 HX5450 HM.3 SERIES: Belt Drive Part No. HM.3 8.751-179.0 8.751-180.0 8.751-181.0 8.923-100.0 8.923-101.0 8.923-165.0 8.923-166.0 Model/Orig. No. HX5450R HX5450L GPM 5.4 5.4 PSI 5000 5000 HP 18.3 18.3 RPM 1740 1740 Shaft Weight 24mm Right 43 lbs 24mm Left 43 lbs Model/Orig.l No. HM3540R.3 HM4035R.3 HM4035L.3 HM4031R.3 HM4031L.3 HM4030R.3 HM4030L.3 GPM 3.5 4.8 4.8 4.0 4.0 4.0 4.0 PSI 4000 3500 3500 3000 3000 3000 3000 HP 9.5 11.5 11.5 8.2 8.2 8.2 8.2 RPM 1850 1500 1500 1725 1725 1000 1000 Shaft 24mm Right 24mm Right 24mm Left 24mm Right 24mm Left 24mm Right 24mm Left Weight 21 lbs 21 lbs 21 lbs 21 lbs 21 lbs 21 lbs 21 lbs HT SERIES: Belt Drive Part No. 8.921-718.0 8.921-719.0 8.921-720.0 8.921-721.0 HT Model/Orig.l No. HT4540.R.2 HT4540.L.2 HT6036.R.2 HT6036.L.2 GPM 4.5 4.5 6.0 6.0 PSI 4000 4000 3600 3600 HP 12.3 12.3 14.7 14.7 RPM 1360 1360 1450 1450 Shaft 25mm Right 25mm Left 25mm Right 25mm Left Weight 33 lbs 33 lbs 33 lbs 33 lbs Page 26

HOTSY BRANDED PARTS HOTSY Pump Repair Kit Selection Chart Use the selection chart below to find the correct repair kits for the specific Hotsy Pump Model. Pump Model Seal Type H300 H300A H300R H400 H400A H400R H450 H500 H600 H700 HC165 HC165R HC168R HC205AL HC215 HC235 HC240 HC240A HC280 HC340R HC450 HC450A HC450R HC460AL HC460AR HC460L HC460R HC500 HC500A HC500R HC600 HC800 HC930R HC940R HC950R HD3025 HD3030H HD4020 HE2020F HE2020S HE2825F HE2825S HE3525F HG2530G HG3030G HG3035G HG3535G HG4030G HH5050 HHC300AR HHC500AR HHC950AR HHS335CR U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U Seal Kit (qty / pump) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.916-488.0 (1) 8.916-487.0 (1) 8.725-364.0 (1) 8.725-364.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.717-623.0 (1) 8.725-360.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-360.0 (1) 8.725-362.0 (1) 8.725-360.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.916-488.0 (1) 8.725-364.0 (1) 8.916-488.0 (1) 8.916-487.0 (1) 8.725-364.0 (1) 8.725-356.0 (1) 9.804-076.0 (1) 8.725-356.0 (1) 8.725-354.0 (1) 8.725-356.0 (1) 8.725-354.0 (1) 8.725-356.0 (1) 8.725-354.0 (1) 8.725-354.0 (1) 8.725-354.0 (1) 8.725-354.0 (1) 8.725-354.0 (1) 8.725-354.0 (1) 9.804-492.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-364.0 (1) 8.725-358.0 (1) Complete Seal Kit (qty / pump) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-404.0 (3) 8.725-405.0 (3) 8.725-401.0 (3) 8.725-401.0 (3) 8.725-408.0 (2) 8.725-408.0 (2) 8.717-671.0 (2) 8.725-415.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-415.0 (3) 8.725-407.0 (3) 8.725-418.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-404.0 (3) 8.725-401.0 (3) 8.725-404.0 (3) 8.725-405.0 (3) 8.725-401.0 (3) 8.725-357.0 (3) 9.804-077.0 (3) 8.725-357.0 (3) 8.725-355.0 (3) 8.725-357.0 (3) 8.725-355.0 (3) 8.725-357.0 (3) 8.725-355.0 (3) 8.725-355.0 (3) 8.725-355.0 (3) 8.725-355.0 (3) 8.725-355.0 (3) 8.725-355.0 (3) 9.804-493.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-401.0 (3) 8.725-417.0 (3) Valve Kit (qty / pump) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (4) 8.717-584.0 (4) 8.717-584.0 (4) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-590.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-591.0 (6) 8.717-589.0 (6) 8.717-589.0 (6) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.802-604.0 (1) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-589.0 (6) 8.717-590.0 (6) Plunger Oil Seal Kit (qty / pump) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-585.0 (1) 8.717-585.0 (1) 8.717-585.0 (1) 8.717-585.0 (1) 8.717-587.0(1) 8.717-587.0(1) 8.717-587.0(1) 8.717-585.0 (1) 8.717-585.0 (1) 8.717-585.0 (1) 8.717-585.0 (1) 8.717-585.0 (1) 8.717-585.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-585.0 (1) 8.717-585.0 (1) 8.717-585.0 (1) 8.717-585.0 (1) 8.717-585.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.802-606.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-585.0 (1) 8.717-618.0 (1) Ceramic Sleeve (qty / pump) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-586.0 (3) 8.717-601.0 (3) 9.802-614.0 (3) 9.802-614.0 (3) 8.717-670.0 (2) 8.717-670.0 (2) 8.717-670.0 (2) 8.717-632.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-632.0 (3) 8.717-617.0 (3) 9.803-935.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 8.717-586.0 (3) 9.802-614.0 (3) 8.717-586.0 (3) 8.717-601.0 (3) 9.802-614.0 (3) 9.803-935.0 (3) 9.803-934.0 (3) 9.803-935.0 (3) 9.803-934.0 (3) 9.803-935.0 (3) 9.803-934.0 (3) 9.803-935.0 (3) 9.803-934.0 (3) 9.803-934.0 (3) 9.803-934.0 (3) 9.803-934.0 (3) 9.803-934.0 (3) 9.803-934.0 (3) 9.802-629.0 (3) 8.717-617.0 (3) 8.717-617.0 (3) 9.802-614.0 (3) 9.803-934.0 (3) Page 27

HOTSY BRANDED PARTS HOTSY Pump Repair Kit Selection Chart, continued Pump Model Seal Type HM3540 HM4035 HS3040G HS330R HS335R HS340R HS3540G HS4040G HS5030G HX1025L HX1025R HX5050L HX5050R HX8030L HX8030R HM4035.3 HM3540.3 HH306R.2 HH406R.2 HH456R.2 HH466R.2 HH506R.2 HS3040G.3 HS3540G.3 HS4040G.3 HS5030G.3 HX5843.2 HX8043.2 HX9536.2 HX1036.2 HT4540.2 HT6036.2 HB3030 HB4025 HF2030F HF2030S HF2830F HF2830S HF3530F HP2535G HP3035G HP3035G1 HP3535G1 HP4035G1 U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U Seal Kit (qty / pump) 8.725-358.0 (1) 8.725-360.0 (1) 8.725-358.0 (1) 8.725-358.0 (1) 8.725-358.0 (1) 8.717-646.0 (1) 8.725-358.0 (1) 8.725-358.0 (1) 8.725-358.0 (1) 8.725-364.0 (1) 8.725-364.0 (1) 9.804-492.0 (1) 9.804-492.0 (1) 8.725-364.0 (1) 8.725-364.0 (1) 8.725-360.0 (3) 8.725-358.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-407.0 (3) 8.725-358.0 (3) 8.725-358.0 (3) 8.725-358.0 (3) 8.725-358.0 (3) 8.752-843.0 (3) 8.752-843.0 (3) 8.752-844.0 (3) 8.752-844.0 (3) 8.753-821.0 (3) 8.753-821.0 (3) 8.754-856.0 (3) 8.754-856.0 (3) 8.754-860.0 (3) 8.754-856.0 (3) 8.754-860.0 (3) 8.754-856.0 (3) 8.754-860.0 (3) 8.754-860.0 (3) 8.754-860.0 (3) 8.754-860.0 (3) 8.754-860.0 (3) 8.754-860.0 (3) Complete Seal Kit (qty / pump) 8.725-359.0 (3) 8.725-361.0 (3) 8.725-359.0 (3) 8.725-417.0 (3) 8.725-359.0 (3) 8.717-647.0 (3) 8.725-359.0 (3) 8.725-359.0 (3) 8.725-359.0 (3) 8.725-365.0 (3) 8.725-365.0 (3) 9.804-493.0 (3) 9.804-493.0 (3) 8.725-365.0 (3) 8.725-365.0 (3) 8.725-361.0 (1) 8.725-359.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-359.0 (1) 8.725-359.0 (1) 8.725-359.0 (1) 8.725-359.0 (1) 8.752-849.0 (1) 8.752-849.0 (1) 8.752-850.0 (1) 8.752-850.0 (1) 8.753-822.0 (1) 8.753-822.0 (1) 8.754-857.0 (1) 8.754-857.0 (1) 8.754-861.0 (1) 8.754-857.0 (1) 8.754-861.0 (1) 8.754-857.0 (1) 8.754-861.0 (1) 8.754-861.0 (1) 8.754-861.0 (1) 8.754-861.0 (1) 8.754-861.0 (1) 8.754-861.0 (1) Valve Kit (qty / pump) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 8.717-590.0 (6) 9.802-603.0 (1) 8.717-590.0 (6) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-608.0 (1) 9.802-608.0 (1) 9.802-604.0 (1) 9.802-604.0 (1) 9.802-608.0 (1) 9.802-608.0 (1) 9.802-603.0 (6) 9.802-603.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 8.717-584.0 (6) 9.802-603.0 (6) 9.802-603.0 (6) 9.802-603.0 (6) 9.802-603.0 (6) 8.752-853.0 (6) 8.752-853.0 (6) 8.752-853.0 (6) 8.752-853.0 (6) 8.753-824.0 (6) 8.753-824.0 (6) 8.754-859.0 (6) 8.754-859.0 (6) 8.754-859.0 (6) 8.754-859.0 (6) 8.754-859.0 (6) 8.754-859.0 (6) 8.754-859.0 (6) 8.754-859.0 (6) 8.754-859.0 (6) 8.754-859.0 (6) 8.754-859.0 (6) 8.754-859.0 (6) Plunger Oil Seal Kit (qty / pump) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 8.717-618.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-606.0 (1) 9.802-606.0 (1) 9.802-606.0 (1) 9.802-606.0 (1) 9.802-606.0 (1) 9.802-606.0 (1) 9.802-609.0 (3) 9.802-609.0 (3) 8.717-618.0 (3) 8.717-618.0 (3) 8.717-618.0 (3) 8.717-618.0 (3) 8.717-618.0 (3) 9.802-609.0 (3) 9.802-609.0 (3) 9.802-609.0 (3) 9.802-609.0 (3) 8.752-835.0 (6) 8.752-835.0 (6) 8.752-835.0 (6) 8.752-835.0 (6) 8.752-835.0 (3) 8.752-835.0 (3) 9.803-937.0 (3) 9.803-937.0 (3) 9.803-937.0 (3) 9.803-937.0 (3) 9.803-937.0 (3) 9.803-937.0 (3) 9.803-937.0 (3) 9.803-937.0 (3) 9.803-937.0 (3) 9.803-937.0 (3) 9.803-937.0 (3) 9.803-937.0 (3) Ceramic Sleeve (qty / pump) 8.933-023.0 (3) 9.802-629.0 (3) 8.933-023.0 (3) 9.803-934.0 (3) 8.933-023.0 (3) 9.803-934.0(3) 8.933-023.0 (3) 8.933-023.0 (3) 8.933-023.0 (3) 9.802-614.0 (3) 9.802-614.0 (3) 9.802-629.0 (3) 9.802-629.0 (3) 9.802-614.0 (3) 9.802-614.0 (3) 8.751-237.0 (3) 8.933-023.0 (3) 8.751-238.0 (3) 8.751-238.0 (3) 8.751-238.0 (3) 8.751-238.0 (3) 8.751-238.0 (3) 8.933-023.0 (3) 8.933-023.0 (3) 8.933-023.0 (3) 8.933-023.0 (3) 8.752-838.0 (3) 8.752-838.0 (3) 8.752-938.0 (3) 8.752-939.0 (3) 8.753-823.0 (3) 8.753-823.0 (3) 8.754-858.0 (1) 8.754-858.0 (1) 8.754-862.0 (1) 8.754-858.0 (1) 8.754-862.0 (1) 8.754-858.0 (1) 8.754-862.0 (1) 8.754-862.0 (1) 8.754-862.0 (1) 8.754-862.0 (1) 8.754-862.0 (1) 8.754-862.0 (1) Page 28

HOTSY BRANDED PARTS HOTSY Pump Seal Kits Part No. 8.717-623.0 8.717-646.0 8.725-354.0 8.725-356.0 8.725-358.0 8.725-360.0 8.725-362.0 8.725-364.0 8.916-487.0 8.916-488.0 9.804-076.0 9.804-492.0 Complete Seal Kits Part No. 8.717-647.0 8.717-671.0 8.725-355.0 8.725-357.0 8.725-359.0 8.725-361.0 8.725-365.0 8.725-401.0 8.725-404.0 8.725-405.0 8.725-407.0 8.725-408.0 8.725-415.0 8.725-417.0 8.725-418.0 9.804-077.0 9.804-493.0 Ceramic Plunger Kits Part No. 9.803-934.0 9.803-935.0 8.717-586.0 9.802-614.0 8.717-617.0 8.717-601.0 8.717-632.0 8.717-670.0 9.802-614.0 8.933-023.0 9.802-629.0 8.751-238.0 Maintenance Kit Orig. No. Part No. 8.756-717.0 Valve Kits Kit Description 20mm 2 CYL 15mm 3 CYL 15mm 18mm 15mm 3 CYL 18mm 3 CYL 20mm 3 CYL 25mm 3 CYL 22mm 3 CYL 20mm 3 CYL 15mm Hot Water 18mm Part No. Orig. No. 8.717-590.0 753039 8.717-589.0 753069 8.717-591.0 753110 8.717-584.0 877648 Kit Description HC340R,HHS335CR,HS330R, HS340R - Inc (1) HC940,HC 950, HHC950AR - Inc (6) HC930 Series - Inc (1) 10mm - Inc (1) 9.802-603.0 70-260007 HM,HS Series - Inc (6) 9.802-604.0 70-260018 HH, HX series Inc (6) 9.802-608.0 70-260025 HX Series - Inc (6) 9.803-936.0 70-260028 HD, HE, HG Series - Inc (6) HOTSY Pump Tool Kits A must for every service department. Save time using the right tool for the job. The HOTSY Pump Tool Kit includes: Kit Description 15mm 3 CYL 20mm 2 CYL 15mm 18mm 25mm 18mm 25mm 25mm 3 CYL 20mm 3 CYL 22mm 3 CYL 20mm 3 CYL 20mm 2 CYL 18mm 3 CYL 15mm 3 CYL 18mm 3 CYL 15mm Hot Water 18mm Hot Water Part No. 9.802-953.0 9.802-568.0 Orig. No. 753040 753107 877651 877652 877656 877659 877674 877684 Description 15mm 18mm 20mm 25mm 20mm 22mm 18mm 20mm 70-260209 25mm 70-260823 15mm 70-261217 18mm 20mm Original No. 918430 959260 6mm Allen Wrench 14mm Allen Wrench Plastic Covered Thin Blade Screwdriver Plastic Hammer Seal Extractor Two Piece Inserter for Sleeves Two Part Seal Inserter for Plunger Rods Crankshaft Seal Inserter Two Part Seal Inserter for Plunger Rods Crankshaft Seal Inserter Plastic Tool Box Pliers Seal Extractor Kit Description 13 Piece Hotsy Pump Tool Kit Pliers, Seal Extractor Plunger Oil Seal Kits Original no. Part No. 8.717-585.0 8.717-618.0 8.717-587.0 8.756-717.0 9.802-606.0 9.802-609.0 9.803-937.0 877653 877655 877687 70-260023 70-260027 70-260826 Description H, HC Series - See Selection Chart H, HC, HS Series - See Selection Chart HC165, HC168 Series Oil Seal Maintenance Kit HH, HX Series HM, HS Series HD, HE, HG Series Kit Description Normal Maintenance Kit Page 29

HOTSY BRANDED PARTS Pump Oil • Formulated to exceed the factory specifications for HOTSY and other high pressure pumps. • Non-detergent, non-foaming Part No. 8.923-422.0 Description 32 oz Bottle 8.715-491.0 Part No. Downstream Chemical Injectors • Applies detergent while by-passing vital machine components Fixed Injector Adjustable Injector Part No. Adjustable 9.802-956.0 8.709-428.0 8.709-429.0 Fixed - Cold Water 8.709-419.0 9.802-957.0 8.709-421.0 8.709-422.0 8.709-420.0 8.709-423.0 8.709-424.0 Repair Kits 8.717-663.0 8.718-494.0 8.718-495.0 8.717-664.0 Original No. 873579 873580 873582 873594 873591 722400 722436 875760 722429 722430 877665 753048 753121 908285 Description Hot Water 2.1mm 3/8” M x 3/8” M Cold Water 2.1mm 3/8” M x 3/8” M Cold Water 2.3mm 3/8” M x 3/8” M 1.8mm 3/8” F x 3/8” M 2.1mm 3/8” M x 3/8” M 2.1mm 3/8” F x 3/8” M 2.1mm 3/8” qc skt x 3/8” qc plug 2.3mm 3/8” F x 3/8” M 1.8mm 3/8” M x 3/8” M 2-3 GPM Ceramic Check 2.1mm 3/8” M x 3/8” M 3-5 GPM Ceramic Check Repair Kit 873579, 873591 Repair Kit 722429, 722430 Repair Kit 873580,873582,873594, 722400,722436,875760 Orifice, Blank Inlet Chemical Injector • Two adjusting knobs for incoming water pressure and detergent metering Pressure Relief Valves Part No. Part No. 9.803-275.0 8.700-290.0 Description Hotsy Dual-Adjusting Injector Repair Kit 8.718-496.0 8.707-332.0 8.707-337.0 8.707-332.0 8.707-336.0 8.718-496.0 8.707-274.0 8.707-335.0 8.711-231.0 8.707-334.0 8.707-258.0 Orig.l No. PSI 971204 971181 971187 971182 921468 971185 971183 971184 921440 500 1000 1500 2000 2200 2500 3000 3500 150 PSI/ 210°F 8.715-499.0 8.715-492.0 8.715-496.0 8.715-495.0 8.715-504.0 8.715-503.0 8.715-505.0 8.715-509.0 8.715-508.0 9.802-363.0 9.802-361.0 9.803-899.0 9.803-900.0 921300 SM w/o Knob 921304 SM w/o Knob 971179 SM w/o Knob 971582 LG w/ Knob 971581 LG w/ Knob 971580 LG w/ Knob 971555 921391 XLG w/ Knob 921390 XLG w/ Knob 5-3029 VB55 for Hotsy HM,HS 921809 VB55 w/1/8” Bore for easy start 5-3329 VBA35 for Hotsy HG, HD, HE 5-3330 VBA35 for Hotsy HM,HS LG w/ Knob (w/o Spacer) 6.6 2200 6.6 1000 6.6 1500 8.0 1500 8.0 2200 8.0 3000 8.0 3000 13.2 2000 13.2 3000 8 3650 8 3200 6.6 3500 6.6 3500 8.715-469.0 8.715-498.0 8.707-351.0 8.715-502.0 8.715-500.0 8.715-491.0 8.715-494.0 8.715-493.0 8.715-490.0 8.715-505.0 Orig. No. Description 921501 XSM w/o Knob 1/4 Bypass 921467 XSM w/o Knob 1/4 Bypass 921505 XSM w/o Knob 3/8 Bypass 921462 H/M Duplex Pumps 921378 H/M High Temp O-rings 921461 H/M Sml & Med Triplex w/ Hi Flow Banjo 921464 H/M SST Pumps 921465 GPM PSI 6.6 500 6.6 4500 6.6 2500 6.6 1000 6.6 600 921460 H/M Sml & Med Triplex Pumps 6.6 3000 6.6 3000 6.6 3000 H/M SST w/ Hi Flow Banjo Bolts 6.6 3000 Hotsy Unloaders • Head mount or remote • Lock device • Hotsy proven performer’s Page 30

HOTSY BRANDED PARTS Thermostats Flow Switch 8.712-191.0 8.716-102.0 Part No. 8.712-191.0 8.712-195.0 For use with above: 8.712-190.0 8.718-779.0 8.712-189.0 8.707-286.0 9.804-564.0 8.716-102.0 8.712-199.0 8.712-200.0 8.712-206.0 Orig. No. 955930 955940 915390 735321 835150 389522 735226 950513 950509 950516 875707 Float Tank • Heavy 3/16” durable plastic Detergent Flow Meter 9.804-042.0 Part No. 9.804-042.0 8.706-642.0 8.706-643.0 Orig. No. 890880 890760 952721 Description 2.5 gal w/o Adapter 4.0 gal w/ Cover 8.0 gal, 7-3/4” x 20-3/4” x 15” Part No. Orig. No. 8.712-139.0 886539 Description Up to 100 PSI @ 150°F • 100 PSI working pressure • 150° • Measures detergent / water flow ratio Description 240°F 1M Probe 240°F 2M Probe Mounting Plate Screws (2),Mounting Plate Dial Well Screw, Well Temp Control Bulb 200°F Temp Control w/ Bulb -100 + 400 Fenwall Switch Therm NC 140°F Part No. 8.716-129.0 8.712-267.0 8.717-667.0* 8.717-668.0* 8.717-256.0* 8.716-129.0 Orig. No. Description 875651 885680 753134 753228 875653 Hotsy Hotsy Repair Kit-Seal Repair Kit-Plunger Micro Switch * Repair parts only fit the 8.716-129.0. PSI Amp Voltage 4000 15 250 5800 15 250 • Activated pressure 375 PSI Part No. 8.716-139.0 8.716-138.0 Original No. Description 950499 950496 Pressure Switch FS 1 McDonnell - 1/2” FPT FS 6 McDonnell - 1” FPT Page 31

HOTSY BRANDED PARTS Geared Reduction for Hotsy Pumps Coils • Heavy-duty schedule 80 carbon steel pipe • Best warranty in the industry • Sized to water flow for maximum heat rise • Wound specifically for oil and gas fired applications Part No. B5 8.749-922.0 B10 8.749-923.0 B18 8.715-342.0 8.749-924.0 8.749-925.0 8.715-344.0 B18H 8.749-926.0 HP 1 in. 24 mm 155.2 oz. 2.176:1 11-18 1 in. 24 mm 1-1/8 in. 24 mm 0.984 in. 24 mm 1 in. 25 mm 139.3 oz. 2.176:1 11-18 HP 139.3 oz. 2.176:1 139.3 oz. 2.176:1 139.3 oz. 2.176:1 11-18 HP 11-18 HP 11-18 HP 1 in. 24 mm 193.3 oz. 2.176:1 7-10 HP 8.911-493.0 8.911-497.0* 8.925-221.0 8.911-499.0* 8.911-500.0 8.911-494.0 8.911-502.0* 8.911-505.0* Coil Insulation • Refractory Grade Ceramic • Retains heat inside coil for better fuel efficiency and paint protection 873750 Part No. 8.717-412.0 8.717-413.0 8.717-451.0 8.717-452.0 8.717-414.0 8.717-442.0 8.717-446.0 9.802-908.0 8.717-438.0 9.802-903.0 9.802-904.0 8.717-445.0 8.717-450.0 9.802-587.0 8.717-449.0 8.717-441.0 Original No. 268015 268016 873757 873762 268017 873749 873751 873776 873777 873778 873779 873786 722418 722423 722411 873750 Description Cerafelt 24 x 56 Cerafelt 6 x 56 Cerafelt 1/2 x 24, Bulk/sqft Cerafelt 1 x 24, Bulk/sqft Fiberglass 18 OD x 10.3 ID Fiberglass 18 OD x 8.0 ID Fiberglass 29 x 58 Fiberglass 10 x 52 Fiberglass 22.5 x 52 Fiberglass 16 OD x 4.5 Fiberglass 16 OD x 8.3 Fiberglass 18 OD x 10 Fiberglass 8 x 17.5 Fiberglass TBG 50 ID Fiberglass 16 0D x 10 Tophead 18 OD x 4.0 ID Gas/Oil Fired 8.911-496.0 Gas Fired 8.925-215.0 8.911-501.0* 8.911-495.0 8.911-503.0 8.911-504.0* 8.911-976.0* 8.911-996.0* 241098 241173 241208 241292 241313 241536 240841 fits 900/1000, 1400 Series fits 611/530 Series fits 5000 Series, 9452 fits 800 30” HGT fits 800 27” HGT 16” fits 551, 558, 559 Series fits 771, 772 *Available from Springdale and Camas 240839 240900 241100 241119 241172 241207 241291 241314 241196 3/4 in. 24 mm 74.1 oz. 2.3:1 6.5 HP Engine Shaft Pump Shaft Weight Gear Ratio Engine Power Part No. Oil Fired 8.925-135.0 226222 16”, fits 444/550/660, 555, 560, 781, 871, 921, 965 Series fits 900/1000, 1400 Series fits 3Z663/5Z021 Series fits 800E/950/810, 1260, 70, 80, 90 Series fits 530, Sheetmetal Frame fits 520/540 Series fits 5000/9450, 5645, 5700 Series fits 800 30” HGT fits 530/610 Series, Angle Frame 28” fits 9460 Series Original No. Description Page 32

HOTSY BRANDED PARTS Wayne Burners Hotsy Hot Water Oil Fired Machines are now being built exclusively with Wayne Burners. Wayne Combustion has been building quality burners since 1928. They are known in the marketplace for superior reliability and ultra-high efficiency. The Wayne Burners have the following features: • Lower Emissions • Improved Efficiencies • Positive flame retention • Controlled Flame Pattern • Low Nozzle Temperatures • High static pressure overcomes adverse draft conditions for a better air/oil mixture Replacement Parts, Wayne (cont) 8.756-291.0 8.756-324.0 8.756-436.0 8.756-716.0 8.717-830.0 8.756-293.0 8.756-294.0 8.756-292.0 8.700-739.0 IGNITOR, BURNER, "E" 240 50-60 IGNITOR, BURNER, "M" 240 50-60 MOTOR, 1/4 120V 50-60HZ MOTOR, 1/4 13.5VDC AMETEK MOTOR, 1/8HP 1PH 230V 3450RPM MOTOR, BURNER, 1/5 120V 50-60HZ MOTOR, BURNER, 1/5 230V 50-60HZ MOTOR, BURNER, 1/7 HP 120/60 BURNER MOT 12V-WH MSR DC FASCO Replacement Parts, Hotsy 8.919-050.0 Operating Part No. 8.756-181.0 8.756-253.0 8.756-254.0 8.756-413.0 8.756-456.0 8.756-480.0 8.756-655.0 8.756-681.0 8.756-703.0 8.756-736.0 8.756-756.0 8.756-890.0 8.756-921.0 8.756-922.0 8.754-264.0 8.754-265.0 8.754-792.0 8.754-793.0 Description MSR 3.75 1T MSR 3.75 1T MSR 3.75 1T EHASR 2T EHASR 1T EHASR 2T MSR 1T EHASR 1T EHASR 1T EHASR 2T EHASR 1T EHASR 2T EH 1.75 1T EH 1.75 1T Vertical Burner M/L Vertical Burner M/L Vertical Burner M/L Vertical Burner M/L Replacement Parts, Wayne 8.700-822.0 8.700-776.0 8.700-721.0 8.756-715.0 8.756-438.0 8.756-674.0 8.756-730.0 8.756-726.0 8.756-677.0 8.700-728.0 8.700-760.0 8.756-290.0 8.717-814.0 8.756-437.0 9.107-507.0 8.700-803.0 8.700-802.0 Air Voltage Cone 120V 6A 120V 120V 7A 120V 230V 7A 230V 120V 4A 120V 230V 7A 24V 12VDC 4A 12VDC 3A 12VDC 12V 12VDC 4A 12V 120V 7A 120V 12VDC 4A 12VDC 12VDC 3A 12VDC 12VDC 4A 12V 120V 3.56" ID Flamelock 120V 230V 3.56" ID Flamelock 120V 12VDC 3.73" ID Flamelock 12V 12VDC 3.73" ID Flamelock 12V 12VDC 3.73" ID Flamelock 12V 12VDC 3.73" ID Flamelock 12V Fuel Pump Solenoid Voltage FLEX COUPLING-F/307007 12V COUPLING 5/16 x 1/2'FS COUPLING FOR 079021X COUPLING, "E" DC FAN - 4.00"W X 6.25"D 1/2" BORE FAN, 3.44"W X 4.25"D 5/16" BORE FAN, 3.44"W X 4.75"D 5/16" BORE FAN, 3.44"W X 5.25"D 5/16" BORE FAN, 3.50"W X 5.75"D 1/2"BORE BLOWERWHEEL EG1/MSR3.44x4.25STAR MET MTR FUEL PUMP, SUNTEC A2VA-3106 230V SOL FUEL PUMP, WCS - COMBO/W SOLENOID 120V FUEL UNIT, SUNTEC A2VA-7916 PUMP - COMBO/W SOLENOID 12V/24V IGNITOR IGNITOR, 120V, BACK/M-MSR MOUNT IGNITOR, 120V, SIDE/EH-EHA MOUNT Page 33 8.752-865.0 8.700-758.0 8.700-759.0 8.700-760.0 8.750-517.0 8.750-518.0 8.751-074.0 8.752-930.0 8.752-931.0 8.752-933.0 8.752-932.0 8.750-543.0 8.753-061.0 8.753-062.0 8.750-520.0 8.751-072.0 8.752-928.0 8.752-929.0 8.750-547.0 8.750-545.0 8.749-000.0 8.752-934.0 8.753-055.0 8.750-539.0 8.750-526.0 8.750-525.0 8.750-778.0 8.919-114.0 8.919-115.0 8.919-116.0 8.918-454.0 8.752-922.0 8.920-654.0 8.750-542.0 8.751-342.0 8.750-762.0 8.750-763.0 8.750-764.0 9.802-640.0 9.802-641.0 8.700-794.0 Burner Housing Assembly - S Burner Housing Assembly - M/L Suntec Fuel Pump, 12-24V Sol Suntec Fuel Pump, 120V Sol Suntec Fuel Pump, 230V Sol Burner Motor, 1/6 HP, 115V - S Burner Motor, 1/6 HP, 230V - M/L Burner Motor, 1/7 HP, 12VDC, Ametek Burner Motor, 1/4 HP, 115V w/cap - M/L Burner Motor, 1/4 HP, 230V w/cap - M/L Burner Motor, 1/5 HP, 13.5 VDC - M/L Burner Motor, 1/7 HP, 115V - M/L Flex Coupling, 1/2” x 5/16” Flex Coupling, 1/2” x 5/16” x 3 7/8”L Flex Coupling, 5/16” x 5/16” x 3 7/8”L Fan, 1/2 Bore - S Fan, 5/16” Bore - S Fan, 6.25 x 4.25 x 1/2 Bore - M/L Fan, 6.25 x 4.25 x .313 Bore - M/L Connector, 37 Degree Flare, 1/8” NPT, Long Connector, 37 Degree Flare, 1/8” NPT Fuel Line Assembly - S Fuel Line Assembly - M Fuel Line Assembly - L Gasket, flange Gun, Electrode / Nozzle, 3” Gun, Electrode / Nozzle, 1” Electrode Ignition Burner Ignitor, 120V Burner Ignitor, 230V Burner Ignitor, 12VDC Junction Box Gasket - S Junction Box Gasket - M/L Junction Box Cover - M/L Junction Box Cover - S Electrode, Ignition, DC Coil, Solenoid, 230V - S Coil, Solenoid, 115V - S Coil, Solenoid, 12-24V - S Coil, Solenoid, 120V - M/L Coil, Solenoid, 230V - M/L Coil, Solenoid, 12-24V - M/L

HOTSY BRANDED PARTS Wayne Burner Replacement Part Cross Reference Chart Material Material Description 8.756-181.0 BURNER, MSR 3.75 120V 1T 120V S 8.756-253.0 Burner MSR 3.75 120V 1T7A 120 V S 8.756-254.0 BURNER, MSR 3.75 230V 1T 230V S 8.756-413.0 BURNER, EHASR 120V 2T 120V S 8.756-456.0 BURNER, EHASR 230V 1T 24V S Fuel Pump Ignitor Burner Motor Burner Fan Coupling 8.756-290.0 8.700-803.0 8.756-292.0 8.700-728.0 8.700-822.0 8.756-290.0 8.700-803.0 8.756-292.0 8.700-728.0 8.700-822.0 8.700-760.0 8.756-324.0 8.717-830.0 8.700-728.0 8.700-822.0 8.700-760.0 8.700-802.0 8.756-436.0 8.756-438.0 8.700-776.0 8.756-437.0 8.756-291.0 8.756-294.0 8.756-677.0 8.700-776.0 8.756-480.0 BURNER, EHASR 12VDC DO 2T 12VDC S 8.756-437.0 9.107-507.0 8.756-716.0 8.756-726.0 8.756-715.0 8.756-655.0 BURNER, MSR 12V 1T 12V S DC 8.756-437.0 9.107-507.0 8.700-739.0 8.756-674.0 8.700-721.0 8.756-681.0 BURNER, EHASR 12VDCDO 1T 12V S 8.756-703.0 BURNER, EHASR 120V 1T 120V S 8.756-437.0 9.107-507.0 8.756-716.0 8.756-674.0 8.756-715.0 8.756-290.0 8.700-802.0 8.756-293.0 8.756-677.0 8.700-776.0 8.756-736.0 BURNER, EHASR 12VDC 1T 12VDC SOL 8.756-437.0 9.107-507.0 8.756-716.0 8.756-730.0 8.756-715.0 8.756-756.0 BURNER, EHASR 12VDCDO 1T 12VDC S 8.756-437.0 9.107-507.0 8.756-716.0 8.756-730.0 8.756-715.0 8.756-890.0 BURNER , EHASR 12VDC DO 2T 12V S 8.756-437.0 9.107-507.0 8.756-716.0 8.756-726.0 8.756-715.0 8.756-921.0 BURNER, EH 1.75 120V 1T 120V S 8.756-922.0 BURNER, EH 1.75 230V 1T 120V S 8.754-264.0 BURNER, WAYNE, EH, 12VDC, 10GPM 8.754-265.0 BURNER, WAYNE, EH, 12VDC 6-8 GPM 8.754-792.0 BURNER, WAYNE, EH, 12VDC, 6GPM 8.754-793.0 BURNER, WAYNE, EH, 12VDC, 5GPM 8.717-814.0 8.700-802.0 8.756-436.0 8.756-438.0 8.700-776.0 8.717-814.0 8.700-802.0 8.756-745.0 8.756-438.0 8.700-776.0 8.717-814.0 9.107-507.0 8.700-739.0 8.756-856.0 8.756-715.0 8.717-8.14.0 9.107-507.0 8.700-739.0 8.756-856.0 8.756-715.0 8.717-814.0 9.107-507.0 8.700-739.0 8.756-726.0 8.756-715.0 8.717-814.0 9.107-507.0 8.700-739.0 8.756-726.0 8.756-715.0 Page 34

HOTSY DETERGENTS Hotsy's Dirty Dozen Recommendations for the Top Hotsy Soaps Hotsy's best all-purpose detergent #1 BREAKTHROUGH! Highly concentrated with dilution ratio of 150 to 1. Whether removing grease or cleaning a finely painted automobile, Breakthrough! is the best all around “go to” detergent. Breakthrough’s high foaming action attacks dead oxidized paint and can be used in hard and cold water applications. Hotsy's most economical detergent for vehicles #2 TRANSPORT VEHICLE WASH If it has wheels, Transport is the detergent of choice. Autos, buses, motor homes, mobile homes, tractor trailers are just a few applications for this economical liquid detergent. Great when used as a pre-spray for engine compartment cleaning and safe on all painted surfaces, stainless steel, aluminum and glass. Hotsy's best heavy-duty degreaser #3 RIPPER 1 Ripper 1 is specially formulated for degreasing heavy equipment and hard to remove road film on tractor trailers, end loaders, excavators and backhoes, yet still safe on painted surfaces. Non-caustic and user-friendly. Hotsy's best detergent for oil field cleaning #4 HOTSY BROWN A degreasing detergent specially formulated for the oil field that also works great on oil soaked or stained surfaces such as, frames and equipment. A non-butyl based product that works good in cold water, Hotsy Brown is a caustic based product and should not be used on fine painted surfaces or magnesium, galvanized or aluminum. Hotsy's aluminum brightening product #5 ADVANCED FORMULA ALUMINUM BRIGHTENER This highly concentrated acid with dilution ratios up to 20 to 1, attacks oxidized aluminum leaving a “like new” look to the surface after the initial application. Not to be used on new aluminum or aluminum that is not oxidized. Hotsy's easy-to-use liquid graffiti remover #6 FAT CAP GRAFFITI REMOVER BRICK, MASONRY& CONCRETE The #1 alternative to sand blasting or painting over unsightly graffiti. Designed for use on exterior brick, masonry and concrete surfaces. Hotsy Fat Cap Graffiti Remover - Brick, Masonry and Concrete cleaner is deep penetrating and fast acting for effective and thorough loosening of spray paint graffiti and easy removal of the graffiti from the surface being treated. Page 35 Hotsy's answer to removing salt and de-icing solution #7 SALT LICK Salt Lick is formulated to remove salt, calcium chloride and deicing solution used on winter roads by breaking down the cyrstalline structure of ice melt products and prevents them from recystalizing so they can be washed away. Salt Lick is a dual-purpose concentrated detergent attacking heavy soils and road film. Hotsy's #1 choice for cleaning food preparation areas #8 CARBOCHLOR A special emulsifying formula with high powered bleach for food processing plants. Excellent on tough odors, stains, dirt, oils and fats left behind on equipment, floors, and walls. NSF recognized for use in Federally Inspected food plants. #9 CON-B-GONE Hotsy's choice for removing green concrete from ready-mix trucks and tools A fast acting acidic product that when applied to ready mix trucks, forms and tools softens dried concrete splatter allowing it to be rinsed away with a hot or cold water pressure washer. Con-BGone's foaming formula makes application over large areas quick and easy. A Hotsy Foamer increases dwell time and maximizes end results! #10 VERDE ALL PURPOSE #1 environmentally-friendly green product for general purpose cleaning A unique blend of environmentally preferred chemicals that provide great cleaning capabilities in all water conditions and all water temperatures. Superior foaming and fast-rinsing provide great results while saving money and the environment. Hotsy's heavy-duty automatic parts washer detergent #11 TUBMATE GENERAL PURPOSE A phosphate-free, biodegradable, super-concentrated liquid. Works great with automatic detergent injectors; can be automatically metered into aqueous parts washers. Quick oil release and solvent free. Heavy duty rust and corrosion inhibitor package protects against flash rusting; defoamers reduce foam in your aqueous parts washer. #12 CITRUS CLEAN Hotsy's answer to "beefing up" the cleaning action of any Hotsy detergent This citrus-based detergent additive increases any detergent’s cleaning and degreasing power and is a great degreaser in its own right, plus it also enhances rinsing. Contains d-limonene which is a great "natural" degreaser. D T I R T Y R D O Z E N D E T E G E N S

HOTSY DETERGENTS HOTSY Detergents Hotsy offers a complete line of biodegradable pressure washer detergents at cost-effective prices. Each is specially formulated for use with pressure washers. Available in a wide variety of quantities - from five-gallon pails to 55-gallon drums, and even Bulk Packs with up to 200+ gallons of on-site storage. Ask your local Hotsy dealer for more info. All Purpose Cleaners Breakthrough! This highly concentrated detergent is effective for tackling crude oil and caked-on buildup of fifth-wheel grease . . . yet it’s gentle enough for fine finishes on cars and to use for general cleaning purposes. Helps restore all types of oxidized paint surfaces. Blue Thunder A popular vehicle cleaner for removing exhaust deposits, road film and bug residue. Excellent for older vehicles with faded finishes; helps restore oxidized paint surfaces of all types. Great for housewashing. Works well in cold water. Product 31 Here’s an all-purpose vehicle cleaner for a wide range of applications. Use it on over-the-road tractors and trailers, truck fleets, and cars. Powerful yet gentle cleaners attack road film and dirt while protecting painted surfaces. Helps restore all types of oxidized paint surfaces. Super X This concentrated powder is popular in the agriculture, construction, transportation and food industries. Safe on all surfaces, it’s easy to use, low foaming and free rinsing. Super XL Low foaming detergent for reduced rinse time. A highly efficient truck wash detergent designed to be low foaming and very free rinsing. Super XL cleans without the bubbles and foam to drastically reduce rinse time and is a favorite of contract cleaners and truck wash facilities. Vehicle Wash Detergents Transport Vehicle Wash Economical liquid detergent cleans stainless steel, aluminum, glass and painted surfaces such as cars, trucks, buses, RV’s, trailers, mobile homes, tractors, etc. Use as a pre-spray for cleaning engines, whitewall tires, vinyl and metal tops. Carbon-Ate Especially formulated to clean engine compartments and hard to clean vehicles, road film, white wall tires and carbon (diesel smoke and exhaust). Works great on polished aluminum. Envy Super Concentrate A vehicle wash detergent that works well in all water conditions and temperatures. Ultra concentrated, hard water formula, high-foaming, easy rinsing, flows in colder temperatures. Fleet Wash Extremely effective for cleaning stainless steel, aluminum, glass and painted surfaces on cars, trucks, RV's, buses, trailers, mobile homes, tractors etc. Perfect pre-spray for cleaning engines, whitewall tires, vinyl and metal tops. Helps restore all types of oxidized paint surfaces. Part # N/A Description Fleet Wash bulk sizes available - ask for details Part # N/A Description Product 31 bulk sizes available - ask for details Part # Description 8.905-136.0 8.905-137.0 Breakthrough!, 5 Gallons Breakthrough!, 55 Gallons Bulk sizes available - ask for details Part # 8.905-442.0 Description Blue Thunder, 5 Gallons Bulk sizes available - ask for details Part # Description 8.904-673.0 8.904-674.0 8.904-675.0 Part # 8.904-725.0 8.904-728.0 Super X, 50 lb Drum Super X, 100 lb Drum Super X, 450 lb Drum Description Super XL, 5 Gallons Super XL, 55 Gallons Bulk sizes available - ask for details Part # Description 8.904-732.0 8.904-733.0 Transport, 5 Gallons Transport, 55 Gallons Bulk sizes available - ask for details Part # 8.904-896.0 8.904-898.0 Description Carbon-Ate, 5 Gallons Carbon-Ate, 55 Gallons Bulk sizes available - ask for details Part # 8.698-077.0 8.698-078.0 Description Envy Super Concentrate, Qty 4, 1 Gallon Containers Envy Super Concentrate, 5 Gallons Page 36 D D T T I I R R T T Y Y R R D D O O Z Z E E N N D D E E T T E E G G E E N N S S

HOTSY DETERGENTS Vehicle Wash Detergents, continued Hotsy Red Part # Outstanding cleaning at a low cost. Ideal for heavy duty, automatic and manual vehicle washing applications. Use at the rate of 1 to 2 oz. per 100 gallons of wash water. Nytro Truckers and fleet maintenance specialists swear by this heavy duty detergent. It makes diesel smoke stains, road film and gummy grease residue disappear. It’s equally effective on floors, walls and windows. Use this powerful cleaner where other detergents and chemicals fail. Panel Wash A highly effective, economical detergent designed for the truck and transportation industry. It contains a small amount of caustic and is effective as a “pre-spray” to attack the final layer of soil that other products might not penetrate. Power Shine High foaming detergent with increased dwell time. Specially formulated for washing vertical painted surfaces and removing bug residue, road film and oxidized paint leaving a shiny surface behind. Safe to use on aluminum and works well in cold water. Vehicle Pre-Soak Used to remove stubborn soils like bugs, tar, oil and grease deposits on vehicles. Apply before washing in order to penetrate and break up soils. The more time allowed to soak, the less scrubbing is required. Rinse Aid With a dilution ratio of 5000 to 1, this is an extremely economical additive for rinse cycles. Hotsy Rinse Aid prevents spotting on vehicles. Vehicle Tire & Rim Cleaner Fast and easy way to deep clean the black rubber, road film and brake dust soils from your tires and rims. Simply spray, wait and rinse. This product should be used to clean tire and wheels before adding tire dressing. Make tire dressings look better and last longer. Safe to use on all tires. Safe for steel and aluminum wheels, including coated wheels. Degreasers Ripper I A highly concentrated, non-caustic cleaner for heavy equipment and trucks. This fast-acting cleaner is especially effective on off-road and grease-clogged equipment and great on hard-toremove road film on tractor/trailers. Safe to use indoors and on all painted surfaces. Excellent for cleaning shop floors and walls where inside cleaning is necessary. Ripper II The serious big brother to Ripper I. Used when extra degreasing power for heavy equipment is needed. The detergent’s superior cleaning action will handle the heavy grease oil and hydraulic oils. Has been used as a pre-paint wash and is not to be used on fine painted surfaces, galvanized, aluminum or magnesium surfaces. Part # 8.904-850.0 8.904-851.0 8.698-093.0 Description Ripper II, 5 Gallons Ripper II, 55 Gallons Ripper II, 275 Gallon Tote Part # 8.698-229.0 Description Vehicle Tire and Rim Cleaner, 12 x 1-Qt Part # 8.905-609.0 Description Rinse Aid, 5 Gallons Part # 8.904-912.0 Description Power Shine, 5 Gallons Bulk sizes available - ask for details Part # N/A Description Panel Wash bulk sizes available - ask for details Part # 8.904-929.0 Description Nytro, 5 Gallons Bulk sizes available - ask for details 8.904-829.0 8.904-830.0 Description Hotsy Red, 50 lb Drum Hotsy Red, 100 lb Drum Bulk sizes available - ask for details Part # Description 8.698-230.0 8.698-231.0 Vehicle Pre-Soak, 5 Gallons Vehicle Pre-Soak, 55 Gallons Part # Description 8.904-846.0 8.904-847.0 8.698-092.0 Ripper I, 5 Gallons Ripper I, 55 Gallons Ripper I, 275 Gallon Tote Page 37 D T I R T Y R D O Z E N D E T E G E N S

HOTSY DETERGENTS Degreasers, continued Ripper III This heavy-duty degreaser is ideal for use as a hood and vent cleaner and will also strip paint and powder coated surfaces. Also great for cleaning hood and vents at restaurants. DO NOT USE on aluminum, magnesium, galvanized metal or fine painted surfaces. Contains Sodium Hydroxide. Citrus Clean This citrus-based detergent additive increases any detergent’s cleaning and degreasing power and is a great degreaser in its own right, plus it also enhances rinsing. Citrus Clean contains d-limonene which is a great "natural" degreaser. Part # Description 8.904-839.0 8.904-840.0 Ripper III, 5 Gallons Ripper III, 5 Gallons Part # Description 8.904-985.0 8.904-986.0 Citrus Clean, 5 Gallons Citrus Clean, 55 Gallons Oil Field & Heavy Equipment Cleaners Hotsy Brown This versatile, extra-strong detergent is caustic based for fast and thorough cleaning. Hotsy Brown is a non-butyl product that is particularly effective on carbon based deposits such as road film and exhaust stains, as well as dirt and grease. Not recommended for use on fine finishes, aluminum, galvanized metal or magnesium. Hotsy Orange Hotsy’s low pH degreaser. This surfactant based non-caustic detergent was developed for people in the oil field that needed good degreasing and cleaning but also needed to be user friendly and have a pH of below 10.5. Orange is safe on painted surfaces and is very effective on carbon based deposits; road film and truck exhaust stains. Part # 8.915-455.0 8.915-453.0 Description Hotsy Brown, 5 Gallons Hotsy Brown, 55 Gallons Bulk sizes available - ask for details Part # 8.698-066.0 Description Hotsy Orange, 275 Gallons Other sizes available - ask for details Aluminum & Stainless Steel Cleaners Advanced Formula Aluminum Brightener Part # An extra-strength, acid-based, aluminum cleaner and brightener designed for non-polished aluminum tanks and trailers, aluminum wheels and for preparing aluminum surfaces for painting. This easy-to-apply formula restores aluminum and makes it look like new in just one application. Do NOT use on glass, polished aluminum or anodized aluminum. Contains no phosphates. Polished Aluminum & Stainless Steel Cleaner This non-etching specialty cleaner contains a concentrated blend of surfactants and glycol ethers to quickly peListrate and remove dirt, grease, oil, road film, diesel smoke and welding smut. Yellow Fever Yellow Fever is a powerful acidic cleaner and aluminum brightener to clean and restore stained aluminum surfaces, without dulling bright aluminum finishes. Yellow Fever is effective in removing diesel smoke, grease, carbon, oils and resins. Removes hard-water scale. Effective in removing mineral efflorescence from brick, masonry and concrete. AVOID CONTACT WITH GLASS OR ANODIZED ALUMINUM. FAC - Foaming Acid Concentrate Cleaner FAC is a heavy duty, high foaming acid cleaner. When used through a foaming device, air or airless, the product produces a thick, light foam that will cling to vertical surfaces allowing significant dwell time for the acid to dissolve milk stone and mineral build up on surfaces. Safe on Stainless Steel. This concentrated formula can dissolve milkstone up to 4 times faster than competitive products at the same dilution. Save time or dilute to lower cost of use. Save space and freight with this concentrated formula. 8.698-227.0 8.698-228.0 Description Adv. Formula Aluminum Brightener, 5 Gallons Adv. Formula Aluminum Brightener, 55 Gallons Part # Description 8.904-749.0 8.904-751.0 Part # 8.698-061.0 8.698-062.0 Polished Aluminum & Stainless Steel Cleaner, 5 Gallons Polished Aluminum & Stainless Steel Cleaner, 55 Gallons Description Yellow Fever, 5 Gallons Yellow Fever, 55 Gallons Part # Description 8.698-128.0 8.698-129.0 FAC, 15 Gallons FAC, 55 Gallons Page 38 D D T T I I R R T T Y Y R R D D O O Z Z E E N N D D E E T T E E G G E E N N S S

HOTSY DETERGENTS Environmentally Friendly Verde All Purpose A unique blend of environmentally preferred chemicals that provide great cleaning capabilities in all water conditions and all water temperatures. Superior foaming and fast-rinsing provide great results while saving money and the environment. Enviro-Clean This phosphate-free detergent is excellent for communities where phosphates are prohibited from entering municipal wastewater treatment facilities. It’s safe for all kinds of cleaning, yet has the cleaning power of highly concentrated degreasers. It is great on polished aluminum. Enviro Gard 2 A quick-release detergent formulated for use with filtration-type or gray water recycle systems. This phosphate-free, biodegradable liquid releases oils and greases rapidly for maximum separation. Low solid content reduces build-up, allowing more cycles between discharge. Non-emulsifying. Part # 8.905-124.0 Description Enviro Gard 2, 55 Gallons Bulk sizes available - ask for details Transportation Specialty Cleaners Salt Lick Salt Lick is formulated to remove salt, calcium chloride and de-icing solution used on winter roads by breaking down the cyrstalline structure of ice melt products and prevents them from re-cystalizing so they can be washed away. A dual-purpose concentrated detergent attacking heavy soils and road film. 400 Wax Part # Added to a final rinse, this long-lasting, liquid wax creates a durable finish that improves a vehicle’s appearance and keeps dirt from adhering to the surface. It gives added protection against salt, air pollution and acid rain. With a dilution ration of 12000 to 1, this is a highly economical wax. Aero One Approved for aircraft use, this non-toxic compound has met rigorous standards set by the aerospace industry (Aerospace Specification AMS-1526). High concentrations of corrosion inhibitors fight effects of salt, air pollution and acid rain. Meets Aerospace Materials Specification AMS-1526C Cleaner for Aircraft Exterior Surfaces, Water-Miscible, Pressure-Spraying Type. Carbon-Ate Plus A special wax is added to Carbon-Ate Plus to provide a durable, attractive finish that keeps dirt from adhering to surfaces and protects them against salt, air pollution and acid rain. Easy to rinse and it reduces water spotting. It works great on polished aluminum. Power Shine Plus A special wax is added to provide a durable, attractive finish that keeps dirt from adhering to surfaces and protects them against salt, air pollution and acid rain. Helps restore oxidized paint surfaces of all types. Easy to rinse; reduced water spotting. It is great on polished aluminum. Part # 8.904-817.0 Description Power Shine Plus, 5 Gallons Bulk sizes available - ask for details Part # 8.904-832.0 Description Carbon-Ate Plus, 5 Gallons Bulk sizes available - ask for details Part # 8.905-634.0 8.905-636.0 Description Aero One, 5 Gallons Aero One, 5 Gallons 8.905-531.0 Description 400 Wax, 5 Gallons Part # Description 8.698-079.0 8.698-080.0 Verde All Purpose, 5 Gallons Verde All Purpose, 55 Gallons Part # Description 8.904-927.0 Enviro-Clean, 5 Gallons Bulk sizes available - ask for details Part # Description 8.698-081.0 8.698-082.0 Salt Lick, 5 Gallons Salt Lick, 55 Gallons Page 39 D D T T I I R R T T Y Y R R D D O O Z Z E E N N D D E E T T E E G G E E N N S S

HOTSY DETERGENTS Institution & Food Preparation Carbochlor A special emulsifying formula with high powered bleach for food processing plants. Excellent on tough odors, stains, dirt, oils and fats left behind on equipment, floors, and walls. Chlorinated for extra punch. NSF Registered for use in federally inspected food plants. Miracle Wizz An unsurpassed liquid for removing baked-on carbon found in food preparation, bakeries, restaurants, food processing plants etc. It is also great for engine degreasing and graffiti removal. Specialty Cleaners Con-B-Gone Con-B-Gone is a fast acting acidic product that when applied to ready mix trucks, forms and tools softens dried concrete splatter allowing it to be rinsed away with a hot or cold water pressure washer. Con-B-Gone's foaming formula makes application over large areas quick and easy. A Hotsy Foamer increases dwell time and maximizes end-results! Coil Conditioner A special conditioner for removing hard water deposits and scale from the internal surface of heating coils. Liquid Foamer When combined with most detergents, it creates mountains of suds and increases dwell time to loosen dirt, grease and oil. Designed for use with foam generators and revolving brushes. Phosphatizer No. 2 A complete and economical detergent and phosphatizing system for one-step cleaning and phosphatizing of iron and steel parts. Hotsy Cleaner / Phosphatizer No. 2 can be used at temperatures ranging from 120°F to 180°F. Equally effective in spray, dip and wipe-on applications. A quality product with 20 years of successful history in the industry. Graffiti Remover Fat Cap Graffiti Remover - Brick, Masonry & Concrete An easy-to-use liquid graffiti remover designed for use on exterior brick, masonry and concrete surfaces. Hotsy Fat Cap Graffiti Remover - Brick, Masonry and Concrete cleaner is deep peListrating and fast acting for effective and thorough loosening of spray paint graffiti and easy removal of the graffiti from the surface being treated. This is the strongest product in the Hotsy Fat Cap Remover family of products. Part # 8.698-028.0 8.698-027.0 Description Fat Cap Graffiti Remover, 1 Quart, Qty 12 Fat Cap Graffiti Remover, 1 Gallon, Qty 4 Part # 8.905-527.0 Gallons Part # 8.904-977.0 8.904-978.0 Description Liquid Foamer, 5 Part # 8.698-083.0 8.698-084.0 8.698-085.0 Description Con-B-Gone, 5 Gallons Con-B-Gone, 55 Gallons Con-B-Gone, 275 Gallons Part # 8.904-979.0 8.904-980.0 Description Carbochlor, 5 Gallons Carbochlor, 55 Gallons Bulk sizes available - ask for details Part # Description 8.904-924.0 Miracle Wizz, 5 Gallons Bulk sizes available - ask for details Part # Description 8.904-764.0 12 Coil Conditioner, 2 lb Containers, Qty Description Phosphatizer No. 2, 5 Gallons Phosphatizer No. 2, 55 Gallons Bulk sizes available - ask for details Page 40 D D D T T T I I I R R R T T T Y Y Y R R R D D D O O O Z Z Z E E E N N N D D D E E E T T T E E E G G G E E E N N N S S S

HOTSY DETERGENTS Parts Washers Tubmate General Purpose Detergent A phosphate-free, biodegradable, super-concentrated liquid. Works great with automatic detergent injectors; can be automatically metered into aqueous parts washers. Quick oil release and solvent free. Heavy duty rust and corrosion inhibitor package protects against flash rusting; defoamers reduce foam in your aqueous parts washer. Hotsy Defoamer This biodegradable defoamer is added to parts-washer cleaning solutions to reduce foam buildup. Hotsy Defoamer does not interfere with the detergent's normal cleaning ability. Tubmate Iron & Steel Cleaner A heavy-duty liquid detergent, perfect for truckers, manufacturers, food processors, bakeries and other applications requiring the removal of heavy grease, baked-on carbon, loose paint and coatings. Rust and corrosion inhibitors and heavy defoamer package. Not an EPA hazardous waste at a pH of less than 12.5. Floor Care Floor Wash Part # Designed for use as a floor cleaner for food, automotive and manufacturing industries. It can be used with hot or cold water and is formulated with a color indicator for control of concentration and strength, and to insure uniform coverage and rinsing. Hotsy "99" A highly concentrated formulation of non-fuming inhibited phosphoric acid and surfactants that remove concrete, welding smut, hard-water scale, rust, mortar, and diesel smoke. It is ideal for cleaning and descaling concrete trucks, metal surfaces, equipment, bricks and glass. DO NOT USE on polished aluminum. Shop Floor Cleaner Specially designed to break up and lift petroleum based, greasy soils commonly found in equipment repair shops. Designed for machine use. Won’t harm expoxy finishes, floor paint when used as directed. Phosphate-free. Effective on any floor surface. Use 1 fluid ounce of product per gallon for routine cleaning. For heavier soil accumulations, use up to 2 ounces per gallon. Animal Hygiene & Bio-Security LFB Copper - Liquid Foot Bath With Copper Dosage: 25 oz. per 50 gallons of water. Change bath every 400-500 cows or if excessively contaminated by mud and manure. See label for complete instructions. LFB Clear - Liquid Foot Bath Dosage: 32 oz. per 50 gallons of water plus 10 lbs. of Copper Sulfate. Change Bath every 400-500 Cows or if excessively contaminated by mud and manure. See label for complete instructions. Part # 8.904-842.0 8.904-843.0 Description Hotsy "99", 5 Gallons Hotsy "99", 55 Gallons 8.749-836.0 8.749-837.0 Description Floor Wash, 40 lb Pail Floor Wash, 100 lb Drum Part # 8.905-087.0 Description Tubmate Iron & Steel Cleaner, 5 Gallons Part # 8.905-144.0 8.905-150.0 Description Tubmate General Purpose, 5 Gallons Tubmate General Purpose, 55 Gallons Bulk sizes available - ask for details Part # Description 8.904-652.0 Hotsy Defoamer, 1 Gallon Containers, Qty 4 Part # Description 8.698-131.0 8.698-132.0 8.698-133.0 Shop Floor Cleaner, 5 Gallons Shop Floor Cleaner, 55 Gallons Shop Floor Cleaner, 275 Gallons Part # Description 8.698-115.0 8.698-116.0 LFB Copper, 15 Gallons LFB Copper, 55 Gallons Part # Description 8.698-113.0 8.698-114.0 LFB Clear, 15 Gallons LFB Clear, 55 Gallons Page 41 D T I R T Y R D O Z E N D E T E G E N S

HOTSY DETERGENTS Animal Hygiene & Bio-Security, continued OSFB - One Step Foot Bath Part # Add 128 ounces of Hotsy OSFB per 50 gallons of water. NOTE: We have seen good results by using less as a maintenance program. Usage may vary due to organic load, water hardness, wet/humid weather or an extreme breakout of warts or similar condition. OPD - Oxy Pre Teat Dip A teat dip product which is ready to use. Spray, dip or foam application. Also available in a concentrate formula. 8.642-665.0 8.642-666.0 Part # 8.698-118.0 8.698-119.0 8.698-195.0 8.698-215.0 TD 44 Conditioning Post Teat Dip A teat dip product which is ready to use. Spray, dip or foam application. Also available in a concentrate formula. Part # 8.698-120.0 8.698-121.0 8.698-196.0 8.698-216.0 A teat dip product which is ready to use. Spray, dip or foam application. TD Blue - Post Teat Dip Part # 8.698-122.0 8.698-123.0 8.698-217.0 8.698-218.0 PPD - Pre and Post Dip Easy to mix: 1 drum of concentrate makes one 275 gallon tote. Spray, dip or foam application. See label for complete directions. DCS - Dry Cow Sealant Use a dedicated container or cup to apply product. Do not save or pour unused product back into original container. NDT - Naval Dip Treatment Use a dedicated container or cup to apply product. Do not save or pour unused product back into original container. Spray directly on wart or infected area. THS - Topical Hoof Spray MTP - Manure Treatment Product - Dairy Charging the lagoon system requires four bulk applications based on the number of dairy cows on the property. After that, 1oz per day per cow is all that is required to keep your lagoons healthy and odor free. HMTP - Hog Manure Treatment Product Apply directly to the liquid portion of the swine-producing facility's manure pit in several location. If a solid crust is present, use an injection pipe (such as a PVC pipe) to apply product toward bottom of the pit. Part # 8.698-126.0 Part # 8.698-240.0 8.698-241.0 Part # 8.698-124.0 Description OSFB, 5 Gallons OSFB, 275 Gallons Description OPD, 55 Gallons OPD, 275 Gallons OPD Concentrate, 55 Gallons OPD Concentrate, 275 Gallons Description TD44, 55 Gallons TD44, 275 Gallons TD44 Concentrate, 55 Gallons TD44 Concentrate, 275 Gallons Description TD Blue, 55 Gallons TD Blue, 275 Gallons TD Blue Concentrate, 55 Gallons TD Blue Concentrate, 275 Gallons Description PPD Ready to Use, 275 Gallons PPD Concentrate, 55 Gallons Description DCS, 1 Quart Containers, Qty 6 Part # 8.698-125.0 Description NDT, 1 Gallon Containers, Qty 4 Description THS, 1 Quart Containers, Qty 6 Part # Description 8.698-110.0 8.698-111.0 MTP, 5 Gallons MTP, 275 Gallons Part # Description 8.698-219.0 8.698-220.0 HMTP, 5 Gallons HMTP, 275 Gallons Page 42

HOTSY DETERGENTS Animal Hygiene & Bio-Security, continued Vital Oxide - Cleaner and Disinfectant Part # Apply directly to the liquid portion of the swine-producing facility's manure pit in several location. If a solid crust is present, use an injection pipe (such as a PVC pipe) to apply product toward bottom of the pit. 8.698-112.0 8.756-449.0 8.639-558.0 8.639-559.0 8.639-560.0 1-Pack Laundry Portion Control Packs One pack per 50 lbs. of laundry. Place packet into detergent reservoir or place directly into wash wheel. Chemical Dispensing Equipment Product Mixing Stations Ball valve chemical proportioner for accurately diluting a chemical concentrate to the required ratio and for filling any sized container with diluted, ready-to-use chemical solution. Venturi injection system uses city water pressure to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. Ball valve activation allows for hands-free dispensing. Internal Tank Foamers Tank Foamer is a low-volume foam applicator with an all stainless steel cart assembly for applying ready-to-use foaming chemicals. Connect compressed air to pressurize the 316L stainless steel tank and to inject air into the solution to greatly increase volume and coverage ability. Part # 8.698-117.0 Description Viatl Oxide, 55 Gallons (US Only) Viatl Oxide, 55 Gallons (Canada Only) Vital Oxide, 1 Gallon Container, Qty 4 (US Only) Vital Oxide, 1 Gallon Container, Qty 4 (Canada Only) Vital Oxide, 1 Quart Container, Qty 6 (US Only) Description 1-Pack Laundry Portion Control Packs, 550 Count PART NO. 8.755-141.0 8.755-142.0 8.755-143.0 8.755-144.0 DESCRIPTION Single Product Mix - Low Flow Single Product Mix - High Flow Dual Product Mix - Low Flow Dual Product Mix - High Flow PART NO. 8.755-145.0 8.755-146.0 DESCRIPTION 5-Gallon Tank Foamer 16-Gallon Tank Foamer Poly Tank 2-Wheeled Foamer The Portable 2-Wheel 20 Gallon LF Foamer is a “low volume” foam applicator for projecting ready-to-use foaming chemicals on to any surface up close or at distances up to 9 feet. Features stainless steel cart. Ultimate Foamer With Gauges A medium volume foam applicator for projecting foaming chemicals on to any surface up close or at a distance. This venturi injection system uses city water pressure to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. HV Foamer With Gauges The HV Foamer is a high volume foam applicator for projecting foaming chemicals on to any large surface. Foam is projected through a discharge hose and fan nozzle at distances up to 15 feet. PART NO. 8.755-150.0 DESCRIPTION HV Foamer PART NO. 8.755-147.0 DESCRIPTION 20-Gallon Poly Tank Foamer PART NO. 8.755-149.0 DESCRIPTION Ultimate Foamer Page 43

HOTSY DETERGENTS Chemical Dispensing Equipment, continued Medium volume hose-end foam gun for diluting and 32 oz. Compact Airless Foamer applying foaming chemicals to any surface. Uses standard city water pressure to draw chemical concentrate from the attached bottle and blend it into the water stream. The accurately diluted solution creates a clinging, wet foam which is then projected on to any surface up close or at distances up to 12 feet. Drum Sticks and Tote Sticks Chemical pick-up assembly to draw chemical solution directly from a drum or tote. Comes complete with a Hastelloy chemical strainer, polypropylene chemical check valve and a selection of polypropylene hose barbs to connect to the most common sizes of hose or tube. PART NO. 8.755-138.0 8.755-139.0 DESCRIPTION Tote Sticks - 54” Drum Stick Pick Up Assembly - 33” PART NO. 8.755-151.0 DESCRIPTION Compact Airless Foamer Hand Hygiene Spray Dispensers Heavy-duty, stainless steel hand sanitizer or soap dispenser; when foot pedal is pressed, the system draws a set amount of ready-to-use chemical and dispenses it directly into the users hand. No electricity or batteries are required. optional one gallon jug rack PART NO. 8.755-136.0 8.755-137.0 DESCRIPTION Spray Dispenser, Wall Mount Spray Dispenser, Floor Mount Timed Entryway Foam Sanitizer An automated foam applicator for projecting sanitizing chemicals on to floors of 3’ wide walk doors to prevent cross contamination. When activated, this venturi injection system uses city water pressure to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. Uni-Body Combo Demo Foamer A combination foam / spray applicator for demonstrating foaming or non-foaming chemicals being applied to any surface. Use the foam wand and nozzle for rich, clinging foam, the airless foam wand to demonstrate without compressed air, or use the spray nozzle to apply chemicals as a fan pattern spray. *Special order. City Water Pressure / Flow Test Kit Connects to a standard male garden hose fitting. Provides quick confirmation of available water pressure and flow rate. Can also be mounted in-line with installed equipment to determine operational water pressure. *Special order. PART NO. 8.755-140.0 DESCRIPTION Timed Entry Way - 3’ door PART NO. 8.755-152.0 DESCRIPTION Uni-Body Combo Foamer PART NO. DESCRIPTION 8.755-148.0 Water Flow Test Kit Page 44

GUNS & LANCES Legacy “Best” Spray Gun Ergnomically designed to be the most comfortable gun on the market. ! PSI: 5000 ! GPM: 12 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 21 oz ! Ideal for commercial cleaning and long work time applications AP Trigger Gun ! PSI: 4500 ! GPM: 8 ! Temperature: 320°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 16.08 oz Part No. 8.754-907.0 Old No 353030 Description MV925 Part No. 8.751-213.0 8.701-673.0 Description M407 Trigger Gun “Best” Spray Gun Unitized Valve Kit Legacy “Industrial” Spray Gun Featuring a comfortable grip to reduce user fatigue. Part No. ! PSI: 5000 ! GPM: 10.4 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 19.84 oz ! Ideal for various industrial cleaning applications Part No. 8.751-214.0 8.751-119.0 Description “Industrial” Spray Gun Valve Kit 8.750-247.0 8.750-456.0 Description M407 Trigger Gun M407 Gun Repair Kit ! PSI: 4000 ! GPM: 7 ! Temperature: 250°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 13.4 oz J.E. Adams Gun ! PSI: 4500 ! GPM: 12 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet PA Linear Gun Ergonomic design minimizes fatigue for operator ! PSI: 4500 ! GPM: 10.5 ! Temperature: 320°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 19.2 oz Part No. 8.752-080.0 9.801-398.0 Description PA Linear Gun PA Linear Gun Repair Kit 21290C Part No. 8.710-394.0 8.710-392.0 8.722-172.0 Part No. 8.710-391.0 Description J.A. Trigger Gun Giant Trigger Guns The original “heavy-weight”. ! PSI: 5000 ! GPM: 10 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 29.28 oz Old No 352290 352250 G021227 Description 21290C – Brass Outlet 21250B – Stainless-Steel Outlet Repair Kit Page 45

GUNS & LANCES Suttner Trigger Guns ! PSI: 1800 ! GPM: 21 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 1.30 lb ST-2620 Part No 8.723-666.0 8.723-667.0 Old No 87236660 87236670 Description ST-2620 ST-2720 Stainless-steel Excellent for truck and fleet washing applications. ST-810 POM Part No 8.710-372.0 ! PSI: 2000 ! GPM: 8 ! Temperature: 320°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: .82 lb Old No 352210P Description ST-810 Gun ! PSI: 5000 ! GPM: 12 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 21 oz ST-2605 Part No 8.710-376.0 8.701-673.0 Old No 352219 089850 Description ST-2605 Unitized Valve Extreme durability with easy pull trigger. ! PSI: 5000 ! GPM: 12 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 21 oz ST-2305 Part No 8.710-386.0 8.701-673.0 8.701-674.0 Old No 352238 089850 089851 Description ST-2305 Unitized Valve Unitized Weep Valve Extreme durability with easy pull trigger. ! PSI: 5000 ! GPM: 12 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 20.8 oz ! Ceramic ball in valve for higher chemical resistance ST-2315 Part No 9.106-073.0 ! Easy pull trigger Description ST-2315 Page 46 Part No 8.749-907.0 Ceramic Unitized Ball Valve ! Ceramic ball ! Highly resistant against nearly all soaps and acids ! Fits in ST-2300, 2305, 2605, 2700 spray guns as a repair kit Description Ceramic Unitized Ball Valve ST-1500 Part No 8.710-384.0 8.710-385.0 8.701-663.0 8.751-119.0 8.701-665.0 Old No 352235 352236 089614 089631 Description ST-1500 ST-1500 w/ Weep Unitized Valve - 4000 PSI Unitized Valve - 5000 PSI Unitized Weep Valve Relax action design, stainless-steel gun. ! PSI: 5000 ! GPM: 12 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 21 oz ST-2700 Part No 8.710-389.0 8.701-658.0 Old No 352243 089070 Description ST-2700 Unitized Valve ST-2000 Part No 8.710-388.0 8.701-663.0 8.751-119.0 8.701-665.0 Old No 352240 089614 089631 Description ST-2000 Unitized Valve – 4000 PSI Unitized Valve – 5000 PSI Unitized Weep Valve The perennial favorite for general pressure washer applications. ! PSI: 5000 ! GPM: 10.4 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 20.5 oz Suttner Trigger Guns 15° offset angle thru gun for easier overhead use. The handle style for “Big Hands”. ! PSI: 5000 ! GPM: 12 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 26 oz

GUNS & LANCES PA Trigger Gun ! PSI: 3200 ! GPM: 8 ! Temperature: 320°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 10 oz Part No 8.710-440.0 8.704-180.0 Old No 353207 109993 Description RL20 Repair Kit ! PSI: 5000 ! GPM: 10.5 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 26 oz Part No 8.710-377.0 8.704-616.0 Old No 352221 111976 Description RL30–YG5000 Repair Kit ! PSI: 5000 ! GPM: 10.5 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 27.5 oz Vega 5000 Part No 8.710-378.0 8.704-232.0 8.704-615.0 Old No 352222-5 110550 111950 Description Vega 5000 Valve Kit Vega Repair Kit Easy pull and easy to hold with matching blue lance. ! PSI: 5650 ! GPM: 8 ! Temperature: 320°F ! 3/8" FPT inlet x 1/4" BSP outlet !Weight: 23.3 oz RL-56 Gun ! Blue vent grip, stainless-steel lance has 1/4" BSP threads 40" Stainless Steel Blue Grip Lance Model RL84 “Big Black Gun” Part No 9.802-227.0 8.710-446.0 8.710-645.0 8.704-610.0 353250 368440PB 111814 Old No Description RL-56 Blue Gun and Wand (does not come with nozzle protector) RL-56 Blue Gun 40" Stainless-Steel Lance w/ blue vent grip (comes with nozzle protector) Repair Kit – RL-55 Part No 8.740-165.0 8.749-327.0 8.704-136.0 8.704-612.0 8.710-445.0 8.750-459.0 Old No 109775 111900 353246 Description Model RL204 Repair Kit – Model RL204 Repair Kit – Model 100 Repair Kit – Model 160 Model RL84 Repair Kit for RL84 Suttner Trigger Gun 15° offset angle thru gun for easier overhead use. ST-601 Part No 8.710-370.0 8.701-663.0 8.751-119.0 ! PSI: 4000 ! GPM: 12 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 23 oz Old No 352201 089614 Description ST-601 Unitized Valve – 4000 PSI Unitized Valve – 5000 PSI Mecline AL 35 Gun Easy pull, easy hold! ! PSI: 5000 ! GPM: 8 ! Temperature: 302°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 20 oz Big Guns Part No 8.720-563.0 Old No AL016650016 Description Repair Kit ! PSI: 3200 ! GPM: 53 ! Temperature:320°F ! 3/4" F inlet / 1/2" outlet !Weight: 47.5 oz Model RL204 ! PSI: 7250 ! GPM: 21 ! Temperature: 210°F ! 1/2" Stainless-steel FPT inlet/outlet !Weight: 60.3 oz Page 47

GUNS & LANCES MV Hobby Wash Gun Excellent light-duty gun. Hobby Wash Gun Part No 8.710-419.0 Old No 353040 NOTE: See page 52 for Hobby Unit parts ! PSI: 1850 ! GPM: 5 ! Temperature: 180°F ! 1/4" M inlet x 1/4" F outlet !Weight: 8.4 oz Description Hobby Wash Gun Flow-Thru Gun “Full” Grip Gun Handle Only Part No 8.710-400.0 ! Pistol-grip gun handle ! Tough polyurethane insulation ! Cushion grip ! Full grip or slim line handle Old No 352606 Gun Handle w/ 18" Lance 8.710-403.0 8.710-404.0 AP1000 Open Gun Durable glass reinforced handle AP-1000 Open Gun Part No 8.710-396.0 Old No 352600 ! PSI: 4000 ! GPM: 12 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet ! Tubular flow-thru internals for high pressure and efficiency !Weight: 16.7 oz Description Legacy AP1000 Open Gun 352614 352616 Description Full Black Grip 3/8" FPT x 1/4" FPT Slim Red Grip 1/4" M x 1/4" F Full Red Grip 3/8" F x 1/4" M AP Dump Guns Water continues to run through the tube even when trigger gun is closed. AP Single Barrel Dump Gun Part No Open Guns Just plain comfortable! ! PSI: 4060 ! GPM: 8 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 12.3 oz MV925 Open Gun Part No 8.754-988.0 Description MV925 without trigger 8.710-405.0 8.710-406.0 8.704-169.0 Old No 352810 352812 109905 Dump Gun Industrial duty dual-barrel. Dual Barrel Dump Gun Part No 8.710-408.0 8.700-311.0 ST-1500H Open Gun ST-1500 Part No 8.710-383.0 Old No ! PSI: 5000 ! GPM: 10.4 ! Temperature: 300°F ! 3/8" FPT inlet x 1/4" FPT outlet !Weight: 20.5 oz ! Flow through design for less down time Description ST-1500 Open Gun Part No 8.710-618.0 8.710-620.0 8.900-781.0 Page 48 Old No 368160 368165 109490 Description 36" – 37.8 oz 72" – 56.0 oz Seal Kit Old No 352820 075296 ! PSI: 3000 ! GPM: 10 ! Temperature: 200°F ! 3/8" FPT inlet x 1/4" FPT outlet Description Dump Gun w/ 36" Barrel Repair Kits ! PSI: 3000 ! GPM: 10.5 ! Temperature: 140°F ! 3/8" FPT inlet x 1/8" FPT outlet Description Dump Gun 16" Lance Dump Gun 40" Lance Repair Kit Legacy Superlite Stainless-Steel Dual Lance Superlite stainless-steel with nozzle guard. Dual Lance w/ Nozzle Guard ! PSI: 4000 ! Temperature: 200°F ! Side handle / valve actuator ! Viton seal ! Forged brass valve body ! 1/4" MPT inlet ! 1/8" stainless-steel outlet tubing

GUNS & LANCES Legacy Square Molded Grip Lances ! PSI: 5250 ! Temperature: 300°F ! 1/4" male inlet and outlet ! High-quality chrome-plate finish Part No 8.752-898.0 8.752-899.0 8.752-900.0 8.752-901.0 8.752-902.0 8.752-903.0 8.752-904.0 8.752-905.0 Description Lance, Molded, 12" Lance, Molded, 20" Lance, Molded, 24" Lance, Molded, 28" Lance, Molded, 36" Lance, Molded, 48" Lance, Molded, 60" Lance, Molded, 79" ! Solid molded polymer construction handle with hollowrib grip for increased heat dissipation Dual Lances Interpump Dual Lance ! PSI: 3000 ! GPM: 10 ! Temperature: 220°F ! Excellent for downstream injector ! Zinc-plated for chemical resistance Part No 8.710-612.0 8.710-621.0 8.904-277.0 8.904-281.0 8.900-135.0 Old No 368150 368172 368151X 368173X 084072X ! Brass and stainless-steel valve w/ Viton seals ! Side handle valve adjustment ! Non-deluxe outlet 1/4" FPT Description 36" Standard 72" Extended 36" Deluxe Standard 72" Deluxe Extended Valve Repair Kit Legacy Oval Molded Grip Lances Featuring a comfortable grip to reduce user fatigue. Dual Lances Premium lance with stainless-steel inserted seat. AL Premium Dual Lance ! PSI: 5250 ! Temperature: 300°F ! 1/4" male inlet and outlet ! 4:1 safety factor Part No Stainless-steel 8.752-882.0 8.752-883.0 8.752-884.0 8.752-885.0 8.752-886.0 8.752-887.0 8.752-888.0 8.752-889.0 8.752-890.0 8.752-891.0 8.752-892.0 8.752-893.0 8.752-894.0 8.752-906.0 8.752-895.0 8.752-907.0 8.752-896.0 8.752-897.0 Description Lance, Molded, 12" Lance, Molded, 20" Lance, Molded, 24" Lance, Molded, 28" Lance, Molded, 36" Lance, Molded, 48" Lance, Molded, 60" Lance, Molded, 79" Lance, Molded, 12" Lance, Molded, 20" Lance, Molded, 24" Lance, Molded, 28" Lance, Molded, 36" Lance, Molded, 36", with handle Lance, Molded, 48" Lance, Molded, 48", with handle Lance, Molded, 60" Lance, Molded, 79" Includes hardened-steel QC inlet plug, 1/8" 40 x 65° soap nozzle and top-quality quick coupler. See lances with deluxe noted above. ! Stainless-steel or high-quality chrome-plate finish ! Solid molded polymer construction handle with hollow rib grip for increased heat dissipation ! PSI: 3600 ! GPM: 10.5 ! Temperature: 302°F AL Basic Dual Lance ! 1/4" tubing ! Vented grip ! 1/4" male inlet-female outlet ! PSI: 3600 ! GPM: 10.5 ! Temperature: 302°F ! 1/4" male inlet-female outlet ! 1/8" zinc-plated tubes ! Square-molded grip inlet Part No Chrome-plated 8.710-722.0 9.803-267.0 8.710-724.0 8.720-548.0 8.904-360.0* Old No 368925 AL8355VPKIT 368927 AL004650300 368926X Description Stainless-steel Pipe 1/8" nozzles Repair Kit Basic Dual Lance 1/4" nozzles Repair Kit AL Premium Deluxe w/ Quick Coupler and Soap Nozzle Page 49

GUNS & LANCES Suttner Dual Lances ST-54 w/ Side Handle ! GPM: 10 ! Temperature: 300°F ! Zinc/chromate finish ! 38" total length Part No 8.710-613.0 8.710-614.0 8.701-594.0 8.900-153.0 8.701-602.0 Old No 368153 368154 086884 086883X 086907 AP Uninsulated Lances Stainless-steel or corrosion-resistant, bright zinc-plated lances made with 1/4" tubing. ST-53 w/ Knob ! Molded grip ! High-pressure, thin-wall tubing !Weight: 42 oz Description ST-53 w/ Knob (4000 PSI) ST-54 w/ Side Handle (4500 PSI) Repair Kit (ST-53) Clamp Kit (ST-53/54) Repair Kit (ST-54) ! PSI: 4100 ! Temperature: 300°F Part No Dual Trigger Lance Unique Design – Go from high- to low-pressure (rinse-to-soap) with a pull of the trigger. Use with separate trigger gun or as an open gun, and still change from high to low. ! PSI: 3600 ! GPM: 12 ! Temperature: 300°F ! Zinc-plated steel tubes ! Stainless-steel seat ! Includes nozzle protector !Weight: 39 oz Part No 8.710-617.0 8.900-781.0 Old No 368158 109490 Description 48" Dual Trigger Lance Seal Kit Vented grip can be pushed and pulled up to 90°. For hard to reach applications, such as gutters, fenders, trucks and heavy equipment. Legacy Vented Lances ! PSI: 5250 ! Temperature: 300°F ! Handle made from molded glassfilled polyamide for heat dissipation with hollow insulators for increased heat venting Part No Stainless-steel 8.752-868.0 8.752-869.0 8.752-871.0 8.752-872.0 8.752-873.0 8.752-874.0 Chrome-plated 8.752-875.0 8.752-876.0 8.752-878.0 8.752-879.0 8.752-880.0 8.752-881.0 Description Lance, Vented, 20" Lance, Vented, 24" Lance, Vented, 36" Lance, Vented, 48" Lance, Vented, 60" Lance, Vented, 79" Lance, Vented, 20" Lance, Vented, 24" Lance, Vented, 36" Lance, Vented, 48" Lance, Vented, 60" Lance, Vented, 79" Page 50 ! Nozzle protector included ! 1/4" male inlet, 1/4" female outlet ! 4:1 safety factor ! Stainless-steel or high-quality chrome-plate finish ! PSI: 3050 ! Temperature: 300°F ! 34" stainless-steel lance Part No 8.710-711.0 Old No 368880 Description ST-85 Push and Pull Lance Stainless-steel 8.710-623.0 8.710-624.0 8.710-625.0 8.710-626.0 8.710-627.0 8.710-628.0 8.710-629.0 8.710-630.0 Zinc-plated 8.710-631.0 8.710-632.0 8.710-633.0 8.710-634.0 8.710-635.0 8.710-636.0 8.710-637.0 Old No 368212 368220 368224 368228 368236 368248 368260 368278 368312 368320 368324 368336 368348 368360 368378 Length 12" 20" 24" 28" 36" 48" 60" 78" 12" 20" 24" 36" 48" 60" 78" NOTE: For 15° bend at lance discharge, place “BND” at end of the old part number. ! Superior strength rolled threads ! 1/4" high-pressure, lightweight, thin-wall tubing Suttner Push and Pull Lance Big Stainless-Steel Lances and Side Handles For big guns! ! PSI: 4050 ! Temperature: 300°F ! High-pressure stainless-steel pipe Part No 8.904-081.0 8.904-083.0 8.904-086.0 8.710-411.0 Old No 352902A 352904A 352906A ! Complete with adjustable handle and coupler for 1/4" MPT nozzle ! 1/2" MPT gun connection ! Schedule 40 pipe Description 20" Wand w/ Handle 40" Wand w/ Handle Side Handle Only 39", Stainless-Steel, 8700 PSI 300°F Inlet 1/2" MNPT, Outlet 1/4" MNPT

GUNS & LANCES GUNS & LANCES Lance Handles/Accessories Vented grip, side handle with nut, and vented grip with side handle, can be user-attached to uninsulated lances or 1/4" steel pipe. Detachable and reusable! Gutter Cleaner Attachment Easily quick connect to any lance or extension wand to clean gutters or hard to reach areas. Angle improves reach and expands cleaning capabilities. Part No 8.710-717.0 8.904-357.0 8.904-358.0 Old No 368909P 368909PS 368920P Description Vent Grip Only (14" long) Grip with Side Handle Side Handle with Nut ! PSI: 3500 ! Temperature: 200°F ! Zinc-plated ! Inlet 1/4" M plug ! Inlet 1/4" F QC Part No 8.711-324.0 Description 1/4" Nipple x 1/4" QC Part No 8.710-716.0 8.710-719.0 8.710-720.0 Old No 368909 368911 368920 Description Vent Grip Only (14" long) ST-9 Grip with Side Handle Side Handle with Nut Adjustable Nozzle Holder ! PSI: 5700 ! GPM: 10 ! Temperature: 300°F ! Perfect for cleaning hard-to-reach areas like inside containers or gutters MV Lance Handle Part No 8.704-162.0 Old No 109873 ! Use on all 1/4" lances ! Easily positioned without removal of nozzle Description 1/4" Lance Handle Extension Wand Control Kit X-Jet Long Range Nozzle 8.710-474.0 ! Projects water and chemical up to 40' ! Chemicals bypass pump, lance, hose and gun for damage protection ! Includes 15' hose with in-line shut-off valve and color-coded proportioners ! Nozzle position locks with pressure ! Stainless-steel ! 1/4" female inlet Part No Description 8.749-905.0 8.749-906.0 Outlet 1/4" FNPT Outlet 1/4" Male Part No 8.710-474.0* 8.710-475.0* 8.710-473.0 Old No 360103 360104 360102 *Includes Close Range Nozzle Description ! Effortlessly raise and lower the wand using the water pressure X-Jet Long Range Nozzle, 2000-3000 PSI X-Jet Long Range Nozzle, 3000-4000 PSI M5 X-Jet Variable Fan, 2000-3000 PSI Long Range Nozzle ! Adjustable pressure ! No kick-back or whipping action ! Easy-grip handle Part No 8.749-848.0 Replacement Accessories ! PSI: 4000 ! Temperature: 300°F ! M22 – 1 O-ring inlet (standard) ! M22 – 2 O-ring outlet (extended) Part No 8.710-428.0 Maintenance Kits 8.704-173.0 8.704-174.0 Old No 353070 109950 109960 Description Astra Style, 10.5 GPM Part No Unitized Valve Trigger Seal Kit 8.710-597.0 8.710-596.0 Page 51 Old No 368117 368116 PSI 3000 5000 Description Extension Wand Control Kit Spray-Flex™ Flex Wand Gives easy access to difficult spots, great for cleaning engines, roofs, eaves or underneath almost anything! Holds its shape under pressure. ! PSI: 3000 and 5000 ! Temperature: 190°F ! 90° flexibility ! Easy to install and control ! Right or left hand adjustable ! Durable, reliable, and lightweight ! Reduce fatigue and time on the job

GUNS & LANCES Fiberglass Telescoping Wands High-quality telescoping wand reaches up to 24', three sizes to choose from. Lightweight and balanced under pressure. MV925 Gun & Lance Kit ! 3/8" MPT QC Nipple installed on inlet of gun ! 1/4" FPT QC Socket installed on outlet of lance ! 4000 PSI ! 8 GPM ! 36" Square Grip Lance Part No Belt and pole clamp ! PSI: 4000 ! GPM: 10.5 ! Temperature: 195°F ! 6'-12' wand shown Part No 8.710-589.0 8.710-590.0 8.710-591.0 8.700-059.0 8.711-324.0 Old No 368090 368091 368092 056008 Replacement Guns 8.723-896.0 8.710-595.0 8.739-434.0 368098 368099 Description 6'-12' 6'-18' 6'-24' Strap and Belt Shoulder Harness Gutter Cleaning Attachment TS12 Replacement Gun TS18 Replacement Gun TS24 Replacement Gun 8.928-442.0 Old No MV925 Gun MV925 Gun, Lance, Hose Kit ! 3/8" MPT QC Nipple installed on inlet of gun ! 1/4" FPT QC Socket installed on outlet of lance ! R1 4000 PSI 3/8" x 50' black hose ! 2-3/8" FPT QC Sock ! 4000 PSI ! 8 GPM ! 36" Square Grip Lance Part No 8.928-443.0 Old No MV925 Gun Hobby Gun, Lance and Hose Flex Lances Flexes a full 180° and returns, saving broken wand repairs. Don’t turn away hobby-unit owners. Complete replacement hose, gun and lance! 8.711-285.0 ! PSI: 2500 ! Temperature: 200°F ! Prevents bent lances and broken hose 9.802-223.0 Part No Part No 8.754-769.0 9.112-526.0 8.753-270.0 8.753-423.0 Old No 4-011137 4-011106 4-011105 4-02010025M NOTE: See page 56 for more Hobby Hose Description Insulated Lance w/ Gun Lance w/ Coupler (Not Shown) Lance w/ #3 Hi/Low Varifan Nozzle 1/4" x 25' Thermoplastic t, 22mm both ends Pressure Washer Accessory Kit Legacy Industrial Gun & Lance Gun and Lance combo ! PSI: 3500 / GPM: 10.4 ! Temperature: 300°F ! Zinc-plated steel tubes ! Stainless-steel seat ! Includes nozzle protector ! 36" Square-molded grip lance with 1/4" quick coupled socket !Weight: 39 oz Part No 8.904-095.0 Description Legacy Gun & Lance with 3/8" MPT QC Inlet Page 52 Kit 1 includes: ! Teflon tape ! Hose, 3000 PSI 3/8 x 50', R1, SoxSw ! QC nozzle, Stainless-steel 1/4" #4.0x15 ! Coupler, 3/8" female brass ! Wand, 18" M22 x 1/4" QC ! Gun, S2 3/8" inlet, lance w/ M22 coupler Kit 2 includes: ! Teflon tape ! Hose, 5000 PSI 3/8 x 50', R2, SoxSw ! QC nozzle, Stainless-steel 1/4" #4.0x15 ! Coupler, 3/8" female brass ! Wand, 18" M22 x 1/4" QC ! Gun, S2 3/8" inlet, lance w/ M22 coupler Part No Description 8.903-454.0 8.903-455.0 Pressure Washer Accessory Kit 1 Pressure Washer Accessory Kit 2 8.710-598.0 8.710-603.0 8.710-604.0 Old No 368118 368121 368124 Description 18", 1/4" MPT x 1/4" MPT 21", 1/4" MPT x 1/8" FPT 24", 1/4" MPT x 1/8" FPT ! Industrial-grade polyurethane flex section ! For self-serve car wash bays ! 1/4" galvanized pipe end sections

HOSE & HOSE REELS Hose - Legacy High-Pressure For use with hot or cold-water pressure washers Introducing the new Legacy hose. The Legacy hose is built to exceed the EN1829-2 Standard and will provide superior abrasion resistance that will increase the life of the hose. The Legacy hose is rated up to 250°F and is available in 4000 and 6000 PSI. Both single-and double-wire braid hoses come with durable 8" bend restrictors on both ends. The Legacy hose has a “bite-the-wire” coupling that grips the hose better than any other design. ! Temperature Rating: Legacy hoses are rated for continuous temperatures up to 250°F. ! Easily Identified: Permanently embossed identification makes for easy tracing and owner protection. Hose - 1-Wire ! Black bend restrictor ! Rated to 250°F ! Smooth impression, oil resistant tube and black hose guard at both ends Part No Size 3/8" x 15' 3/8" x 25' 3/8" x 50' 3/8" x 75' 3/8" x 100' 3/8" x 150' 3/8" x 200' Temperature 3/8” MPT Swivel x 3/8" MPT Solid, 3/8" ID 8.925-176.0 8.925-150.0 8.925-156.0 8.925-161.0 8.925-165.0 8.925-170.0 8.925-350.0 8.925-378.0 8.925-449.0 3/8" x 50' 3/8" x 75' 3/8" x 100' 3/8" x 150' 3/8" x 200' 1/2" x 50' 1/2" x 75' 1/2" x 100' 1/4" x 25' 1/4" x 30' 1/4" x 50' 1/4" x 75' 1/4" x 100' 250 o 250 o 250 o 250 o 250 o 250 o 250 o F F F F F F F Case of 75 (8.925-156.0) 3/8" x 50' Hoses Case of 40 (8.925-165.0) 3/8" x 100' Hoses 3/8” MPT Swivel x 3/8" MPT Swivel, 3/8" ID 8.925-364.0 8.925-365.0 8.925-167.0 8.925-367.0 8.925-368.0 250 o 250 o 250 o 250 o 250o 1/2” MPT Swivel x 3/8" MPT Solid, 1/2" ID 8.925-236.0 8.925-237.0 8.925-238.0 250o 250o 250o 250o 250o 250o 250o 250o 1/4” MPT Swivel x 1/4" MPT Solid, 1/4" ID 8.925-143.0 8.925-144.0 8.925-145.0 8.925-146.0 8.925-147.0 F F F F F F F F F F F F F 4000 4000 4000 4000 4000 3000 3000 3000 3000 3000 3000 3000 3000 Page 53 PSI 4000 4000 4000 4000 4000 4000 4000 ! Unique Coupling: A “bite-the-wire” coupling actually reaches the wire braid for never-slip retention, far superior to the “compression” fittings used on conventional hoses. Hose - 2-Wire ! Red bend restrictor ! Rated to 250°F ! Smooth impression, oil resistant tube and red hose guard at both ends Part No Size Temperature 3/8” MPT Swivel x 3/8" MPT Solid, 3/8" ID 8.928-542.0 8.925-180.0 8.925-184.0 8.925-225.0 8.925-229.0 8.925-232.0 8.925-369.0 8.925-382.0 8.925-450.0 3/8" x 15' 3/8" x 25' 3/8" x 50' 3/8" x 75' 3/8" x 100' 3/8" x 150' 3/8" x 200' 3/8" x 25' 3/8" x 50' 3/8" x 75' 3/8" x 100' 3/8" x 200' 1/2" x 50' 1/2" x 75' 1/2" x 100' 250 o 250 o 250 o 250 o 250 o 250 o 250 o F F F F F F F Case of 75 (8.925-184.0) 3/8" x 50' Hoses Case of 40 (8.925-229.0) 3/8" x 100' Hoses 3/8” MPT Swivel x 3/8" MPT Swivel, 3/8" ID 8.925-311.0 8.925-313.0 8.925-314.0 8.925-316.0 8.925-325.0 250 o 250 o 250 o 250 o 250o 1/2” MPT Swivel x 1/2" MPT Solid, 1/2" ID 8.925-247.0 8.925-249.0 8.925-253.0 250o 250o 250o F F F F F F F F 6000 6000 6000 6000 6000 5000 5000 5000 PSI 6000 6000 6000 6000 6000 6000 6000

HOSE & HOSE REELS Hose - Rawhide 1-Wire 3000 PSI Smooth Non-Marking Part No Old Part No 3/8” Smooth Yellow Hose 8.901-800.0 8.901-802.0 8.901-804.0 8.705-720.0* 3/8” Smooth Blue Hose 8.925-311.0 8.925-313.0 8.925-314.0 8.925-316.0 8.925-325.0 3/8" Smooth Gray Hose 8.749-935.0 8.749-936.0 8.749-945.0* 1/4" Smooth Blue Hose 8.901-796.0 8.901-798.0 8.705-718.0* 158880 158890 158800 158980 158985 158990 158900 158780 158785 158790 158795 158700 Length 50' x 3/8" ID 75' x 3/8" ID 100' x 3/8" ID Temperature 250 o 250 o 250 o F F F Must be purchsed in 500 ft reels 50' x 3/8" ID 75' x 3/8" ID 100' x 3/8" ID 150' x 3/8" ID 250 o 250 o 250 o 250 o F F F F Must be purchsed in 500 ft reels 50' x 3/8" ID 100' x 3/8" ID 250o 250o F F Must be purchsed in 500 ft reels 50' x 1/4" ID 100' x 1/4" ID 250o 250o *500 ft reel, 50 ft incremental lengths (max three pieces) F F Must be purchsed in 500 ft reels 3000 3000 8.0 16.0 3000 3000 13.0 25.0 3000 3000 3000 3000 12.0 17.0 23.0 34.0 Working PSI 3000 3000 3000 12.0 17.0 23.0 Aprox Wt lbs Hose - Legacy Rawhide 2-Wire 3/8" Blue Part No Old Part No 3/8” Blue Hose - Smooth 8.739-229.0 8.739-231.0 8.705-651.0* 154415 154425 154400 Length 50' 100' Temperature 250 o 250 o *500 ft reel, 50 ft incremental lengths (max three pieces) F F Must be purchsed in 500 ft reels Working PSI 4000 4000 Aprox Wt lbs 17.0 33.0 Hose - 3/8" Gray - Wrapped Part No 8.921-618.0 8.921-619.0 8.921-620.0 8.752-156.0 Description 3/8” Grey Hose - Wrapped 8.921-617.0 3/8" x 25', 4K Gray A+ SOXSW 3/8" x 50', 4K Gray A+ SOXSW 3/8" x 75', 4K Gray A+ SOXSW 3/8" x 100', 4K Gray A+ SOXSW 3/8" Bulk, 4K Gray - Must be purchsed in 600 ft reels Page 54

HOSE & HOSE REELS Hose - 3/8" Blue Tuff-Flex 2-Wire 6000 PSI ! Non-marking durable blue cover ! Red hose guard ! 50% greater flexibility ! 3/8" MPT swivel x 3/8" MPT solid ! Smooth impression, maximum oil-resistant tube and cover Part No 8.921-153.0 8.921-154.0 8.921-155.0 8.921-156.0 8.753-319.0 Size 25' x 3/8" ID 50' x 3/8" ID 75' x 3/8" ID 100' x 3/8" ID Temp 250°F 250°F 250°F 250°F Must be ordered in 600' reel Hose - Whitewater Pressure Loop - 1/4", 3/8" and 1/2", 2-Wire The 1/4" ID pressure lines solid/swivel for most any application. The 3/8" ID pressure loops have female JIC on both ends for typical unloader connection hose. All pressure loops rate 275°F. ! 1/4" ID Pressure Loop ! 1/4" MPT swivel x 1/4" MPT solid ! 1/4" ID two-wire 5000 PSI ! Any length available ® Combination Steam Hose Good up to 3000 PSI / 250°F or 350 PSI / 325°F. ! Single high-tensile steel wire braid ! High temperature bend restrictors – both ends ! Seamless innertube ! Solid 3/8" or 1/2" MPT connectors – both ends (Swivel ends NOT available) ! Oil-re sis tant cover PSI 6000 6000 6000 6000 Hose - 3/8" Blue Tuff-Flex 1-Wire 4000 PSI ! Non-marking durable blue cover ! Red hose guard ! Smooth impression, maximum oil-resistant tube and cover ! 50% greater flexibility ! 3/8" MPT swivel x 3/8" MPT solid Part No 8.921-149.0 8.921-150.0 8.921-151.0 8.921-152.0 8.753-316.0 Size 25' x 3/8" ID 50' x 3/8" ID 75' x 3/8" ID 100' x 3/8" ID Temp 250°F 250°F 250°F 250°F Must be ordered in 600' reel PSI 4000 4000 4000 4000 ! JIC Pressure Loop ! 1/2" female JIC swivels - each end ! 3/8" ID two-wire 6000 PSI Part No 8.918-180.0 8.918-181.0 8.918-182.0 8.918-183.0 8.918-184.0 8.918-419.0 8.918-187.0 8.918-210.0 8.918-422.0 8.918-423.0 8.918-424.0 8.918-425.0 8.918-426.0 8.918-427.0 8.711-662.0 8.918-212.0 8.918-224.0 8.711-701.0 8.918-225.0 8.918-228.0 8.918-230.0 Old No Size 4-02047738 4-02067722 16" x 1/4" ID 20" x 1/4" ID 26" x 1/4" ID 28" x 1/4" ID 30" x 1/4" ID 36" x 1/4" ID 42" x 1/4" ID 16" x 3/8" ID 20" x 3/8" ID 22" x 3/8" ID 25" x 3/8" ID 29" x 3/8" ID 32" x 3/8" ID 36" x 3/8" ID 38" x 3/8" ID 42" x 3/8" ID 20" x 1/2" ID 22" x 1/2" ID 28" x 1/2" ID 46" x 1/2" ID 70" x 1/2" ID ! 1/2" ID 4500 PSI ! Any length available Part No Description 1/4" Pressure Loop 1/4" Pressure Loop 1/4" Pressure Loop 1/4" Pressure Loop 1/4" Pressure Loop 1/4" Pressure Loop 1/4" Pressure Loop JIC Pressure Loop JIC Pressure Loop JIC Pressure Loop JIC Pressure Loop JIC Pressure Loop JIC Pressure Loop JIC Pressure Loop JIC Pressure Loop JIC Pressure Loop JIC Pressure Loop JIC Pressure Loop JIC Pressure Loop JIC Pressure Loop JIC Pressure Loop 3/8" Hose 8.901-599.0 8.901-601.0 8.901-598.0 8.901-603.0 8.901-604.0 8.705-643.0 Old No 153930 153950 153925 153975 153990 153900* Length 30' 50' 25' 75' 100' Must be ordered in 500' reel *Full Reel – 500 ft. per reel, hose only, 50 ft. incremental lengths (max three pieces) 1/2" Hose 8.901-721.0 8.901-723.0 8.901-724.0 8.901-725.0 8.705-678.0 155625 155650 155675 155690 155600* 25' 50' 75' 100' Must be ordered in 500' reel *Full Reel – 500 ft. per reel, hose only, 50 ft. incremental lengths (max three pieces) Page 55

HOSE & HOSE REELS Pulse Hose ! 1300 PSI working pressure ! 3/8" MPT on both styles ! Available with either plug-end or open-flow with solid/swivel connects Part No 8.711-151.0 8.711-153.0 8.711-155.0 8.711-157.0 Old No 381118 381124 381128 381136 Description 18" with Plug End 24" with Plug End 28" Solid/Swivel – Open 36" Solid/Swivel – Open Garden Hose – Apex Quality The essential product for pressure washing. ! Rated for cold-water user ! Assemblies complete with bend restrictor ! 5/8" or larger ID for full flow ! Choice of commercial or heavy-duty grade ! Reinforced hose for flexibility & strength in all weather ! Commercial grade has machined octago-l “wrench tight” fittings Part No Hobby Hose Replacement hose for most hobby pressure washers sold by mass retailers. ! Thermoplastic cover ! Fiber-braid reinforcement ! 2250 PSI working pressure ! 9000 PSI burst pressure ! M22 x 1.5 fitting inlet ! 14mm seal cone fits Generac, Excell and Kärcher ! 15mm seal cone fits Campbell, MI-T-M Part No 8.705-485.0 8.705-487.0 8.711-531.0 Old No 150245 150246 4-02010025M Seal Cone 14mm 15mm 22mm* NOTE: See Hobby Gun and Lance on page 52. ID 1/4" 1/4" 1/4" 8.704-786.0 8.704-787.0 8.704-788.0 8.704-789.0 Old No 121315 121319 121332 121336 8.704-791.0 Seal Cone Sewer Hose Length 25' 25' 25' *Both ends (Nozzles not included.) Hose Bend Restrictors ! Used on hose assemblies ! Non-slip sure fit ! Easy installation, 325°F ! Top-quality molded fit bend restrictors ! Fits snugly to prevent kinks near the connectors Part No 8.705-479.0 8.705-476.0 8.705-478.0 8.740-104.0 8.711-846.0 8.705-481.0 8.705-480.0 8.705-483.0 8.705-482.0* *Insulated rubber Old No 150166 150161 150164 Size 5.3" 6.0" 6.0" 150170 150168 150174 150172 24.0" 24.0" 7.0" 7.0" 6.5" 6.5" Description 1/4" 1 wire, Black Vinyl 1/2" 1 wire, Black Vinyl 3/8" 2 wire, Red Vinyl 3/8" 1 wire, Black Vinyl 3/8" 2 wire, Red Vinyl 3/8" 1 wire, Black Vinyl 1/2" 2 wire, Red Vinyl 3/8" Combo, Gray Vinyl 1/2" Combo, Black Rubber ! 160°F max temperature ! Nylon tube, polyether cover ! 1.5 GPM optimum flow 1/8" ! 2.5 GPM optimum flow 1/4" SUPER FLEX I BLE SEWER LINE HOSE AND COUPLINGS have small outside diameter, allowing hose and nozzles to fit through sewer line. Sewer line has super-tough poly-ether cover over ultra-flexible nylon tube. (1/8" sewer nozzle and hose will operate through many 1-1/2" lines.) 121344 121348 Length 50' 100' 50' 100' All Rubber Reinforced Hot Water (160°F) Hose 8.704-790.0 50' 50' See page 71 for garden hose fittings. ID 5/8" 5/8" 5/8" 5/8" 5/8" 3/4" Grade Com Com Color Gray Gray HD Lt. Green HD Lt. Green Com Com Red Red Part No Old No 150960 150963 150964 Description 1/8" Hose – 4800 PSI, 1/4" inlet / 1/8" outlet 8.751-927.0 8.705-602.0 8.705-603.0 1/4" Hose – 2600 PSI, 1/4" inlet / 1/4" outlet 8.705-607.0 8.705-608.0 150968 150970 1/4" Hose – 4400 PSI, 1/4" inlet / 1/4" outlet 8.705-610.0 8.705-611.0 150972 150973 1/8" x 25' 1/8" x 50' 1/8" x 100' 1/4" x 50' 1/4" x 100' 1/4" x 50' 1/4" x 100' Page 56

HOSE & HOSE REELS Orange 600 Sprayer Hose and Ribbed PVC Sprayer Hose Braid-reinforced PVC hose designed specifically for AG/Pest control spraying applications. ! Tough ribbed cover ! Color – orange ! 600 PSI max pressure ! Bulk hose standard in 300' single length coils ! Resists abrasion and UV rays Part No 8.901-384.0 8.901-385.0 8.901-383.0 Old No 3/8" Hose – Orange 8.705-527.0 150630 150634 150636 150632 1/2" Hose – Orange 8.705-523.0 8.901-377.0 8.901-379.0 8.705-524.0 150601 150603 150606 150602 3/4" Hose – Orange 8.705-531.0 8.901-386.0 150660 150660 Description 300' Coil (Single, Uncut Length) 50' Length (Bulk) 100' Length (Bulk) Per Foot (Minimum 25') hose only 300' Coil (Single, Uncut Length) 50' Length 100' Length Per Foot (Minimum 25') hose only 300' Coil (Single, Uncut Length) Per Foot (Minimum 25') hose only Clear Reinforced PVC Tubing Multi-use, industrial-grade tubing with high-resistance to chemicals, solvents and fuel. ! Reinforced with polyester cord ! Huge selection of sizes and lengths ! 4-to-1 burst safety factor Part No Cold Weather Garden Hose ! Ideal for outdoor contractors ! 5/8" – 50 ft. ! High-quality brass fittings ! Heated hose with 110 plug ! Thermostatically controlled — heating element is activated at +/- 35°F temperature and turned off at +/- 40°F ambient temperature ! Use only with a UL approved GFCI outlet or extension ! PVC material FDA-approved for potable water Part No 8.749-944.0 Description 50' Cold Weather Garden Hose See page 71 for garden hose fittings. Part No Vinyl Tubing This 1/4" x 1/2" clear vinyl tubing is heavier duty than the rest! Thick wall resists kinking. Available in clear or clear-reinforced with a polyester braid. ! Very flexible ! Available by the foot or 100' rolls Part No 9.802-251.0 9.802-252.0 8.711-733.0 Old No 4-02080000 4-02090000 ID 1/4" x 1/2" 1/4" x 1/2" 3/8" x 1/2" PSI 50 250 100 Description Clear vinyl / ft Braided vinyl / ft Sold by the foot Page 57 8.724-027.0 8.724-028.0 8.724-029.0 8.706-759.0 Description 3/8" MPT, Solid Hose 3/8" 3/8" MPT, Swivel 3/8" 1/2" FJIC, Solid 3/8" 3/8" FPT, Swivel 3/8" 8.901-256.0 8.901-257.0 8.704-751.0 8.704-752.0 8.901-260.0 8.901-261.0 8.901-262.0 8.704-753.0 8.901-264.0 8.901-265.0 8.704-754.0 8.704-755.0 8.901-263.0 8.901-267.0 8.901-268.0 8.901-269.0 8.704-756.0 8.901-266.0 8.901-271.0 8.901-272.0 8.704-757.0 8.704-758.0 8.901-270.0 8.901-273.0 8.901-274.0 8.901-275.0 8.704-759.0 8.901-276.0 Old No 121031 121032 121033 121034 121036 121037 121038 121039 121041 121042 121043 121044 121046 121047 121048 121049 121051 121052 121053 121054 121059 121060 121061 121063 See page 71 for hose clamps. ID x OD 1/4" x 3/8" 1/4" x 3/8" 1/4" x 3/8" 1/4" x 3/8" 3/8" x 1/2" 3/8" x 1/2" 3/8" x 1/2" 3/8" x 1/2" 1/2" x 3/4" 1/2" x 3/4" 1/2" x 3/4" 1/2" x 3/4" 1/2" 5/8" x 7/8" 5/8" x 7/8" 5/8" x 7/8" 5/8" x 7/8" 5/8" 3/4" x 1" 3/4" x 1" 3/4" x 1" 3/4" x 1" 3/4" 1" x 1 1/4" 1" x 1 1/4" 1" x 1 1/4" 1" x 1 1/4" 1" WP@70°F Roll Length 250 250 250 250 175 175 175 175 175 175 175 175 175 175 140 140 140 140 140 140 140 140 140 75 75 75 75 75 25' 50' 100' 300' 25' 50' 100' 300' 25' 50' 100' 300' per ft 25' 50' 100' 300' per ft 25' 50' 100' 300' per ft 25' 50' 100' 200' per ft Crimp Fittings

HOSE & HOSE REELS “Field” Attachable Couplings Design and build your own hose or adapt and repair hose in the field (no crimper required). Couplings for 1-Wire Braid Hose Part No 8.705-493.0 8.705-495.0 8.705-496.0 8.705-497.0 8.705-498.0 8.705-499.0 8.705-500.0 8.705-501.0 Part No Old No 150502 150505 150510 150511 150513 150515 150516 150518 Couplings for 2- Wire Braid Hose Old No 8.705-502.0 8.705-503.0 8.705-504.0 8.705-505.0 8.705-506.0 8.705-507.0 8.705-508.0 150532 150535 150540 150541 150543 150546 150548 ID x MPT 1/4" x 1/4" – Solid 1/4" x 1/4" – Swivel 3/8" x 1/4" – Solid 3/8" x 3/8" – Solid 3/8" x 3/8" – Swivel 1/2" x 3/8" – Solid 1/2" x 1/2" – Solid 1/2" x 1/2" – Swivel ID x MPT 1/4" x 1/4" – Solid 1/4" x 1/4" – Swivel 3/8" x 1/4" – Solid 3/8" x 3/8" – Solid 3/8" x 3/8" – Swivel 1/2" x 1/2" – Solid 1/2" x 1/2" – Swivel Connector Hose – 2'-10' Connector hose comes with one solid / one swivel end. 3/8" Ultima – 2-wire w/o Bend Restrictors Part No 8.918-271.0 8.918-273.0 8.918-276.0 8.918-278.0 8.918-280.0 8.918-282.0 8.918-284.0 8.918-420.0 8.918-288.0 Length 2' 3' 4' 5' 6' 7' 8' 9' 10' PSI 6000 6000 6000 6000 6000 6000 6000 6000 6000 3/8" Ultima – 2-wire with Bend Restrictors Part No Clear PVC Tubing ! “Box Pak” 100 ft. ! 25°F to 150°F ! Very flexible, non-reinforced ! Packaged in self-dispensing box 1/2" Ultima – 2-wire w/o Bend Restrictors Part No 8.901-279.0 8.704-766.0 Old No 121070 121106 ID 1/4" 1/2" OD 3/8" 5/8" WP @ 70°F 55 30 Part No Flex Line Bypass / Supply Line Hose Industrial PVC hose with black seamless inner tube, polyester braid reinforced tough outer cover. Excellent for use as supply lines or bypass lines. Typically used for air hose. ! Looks and feels like rubber ! Smooth dirt- and oil-resistant finish ! Super flexible ! Abrasion-resistant cover ! Burst-rated three-times WP Part No 8.704-762.0 8.901-282.0 8.704-764.0 8.901-284.0 8.704-765.0 Old No Red Cover, heavy wall 8.901-281.0 121081 121084 121087 121090 121097 121099 Blue Cover, standard wall 8.704-779.0 121160 ID x OD 3/8" x .634" 3/8" x .634" 1/2" x .792" 1/2" x .792" 3/4" x 1.14" 3/4" x 1.14" 1/4" x .475" WP@70°F Roll Length 300 300 250 250 160 160 250 50' 500' 50' 500' 50' 300' 100' Page 58 8.918-292.0 8.918-294.0 8.918-296.0 8.918-298.0 8.918-300.0 8.918-301.0 8.918-302.0 8.918-303.0 8.918-304.0 Length 2' 3' 4' 5' 6' 7' 8' 9' 10' PSI 5000 5000 5000 5000 5000 5000 5000 5000 5000 Hose Color Black Black Black Black Black Black Black Black Black 8.918-272.0 8.918-275.0 8.918-277.0 8.918-209.0 8.918-281.0 8.918-283.0 8.918-285.0 8.918-287.0 8.918-289.0 Length 2' 3' 4' 5' 6' 7' 8' 9' 10' PSI 6000 6000 6000 6000 6000 6000 6000 6000 6000 Hose Color Black Black Black Black Black Black Black Black Black Hose Color Black Black Black Black Black Black Black Black Black

HOSE & HOSE REELS Connector Hose – 2'-10' Connector hose comes with one solid / one swivel end. 3/8" Ultima – 1-wire w/o Bend Restrictors PSI Part No 8.918-253.0 8.918-255.0 8.918-257.0 8.918-259.0 8.918-261.0 8.918-263.0 8.918-265.0 8.918-267.0 8.918-269.0 Length 2' 3' 4' 5' 6' 7' 8' 9' 10' 4000 4000 4000 4000 4000 4000 4000 4000 4000 Hose Color Black Black Black Black Black Black Black Black Black 1/4" Ultima – 1-wire w/o Bend Restrictors PSI Part No 8.918-240.0 8.918-241.0 8.918-242.0 8.918-243.0 8.918-245.0 8.918-247.0 8.918-248.0 8.918-250.0 8.918-251.0 Length 2' 3' 4' 5' 6' 7' 8' 9' 10' 4000 4000 4000 4000 4000 4000 4000 4000 4000 Hose Color Black Black Black Black Black Black Black Black Black Connector Hose / Car Wash Bay Hose – 12'-25' All car wash bay hoses come with solid male pipe on both ends. 3/8" Ultima – 1-wire 4000 PSI, w/o Bend Restrictors PSI Part No 8.918-333.0 8.918-334.0 8.918-336.0 8.918-338.0 8.918-340.0 8.918-342.0 8.918-344.0 8.918-348.0 Length 12' 13' 14' 15' 16' 17' 18' 20' 4000 4000 4000 4000 4000 4000 4000 4000 3/8" Blue – 1-wire 3000 PSI, w/o Bend Restrictors PSI Part No 8.918-360.0 8.918-366.0 8.919-124.0 8.918-369.0 8.918-371.0 8.918-375.0 Length 12' 15' 16' 17' 18' 20' 3000 3000 3000 3000 3000 3000 3/8" Ultima – 1-wire with Bend Restrictors One End PSI Part No 8.919-123.0 8.918-335.0 8.918-337.0 8.918-339.0 8.918-349.0 Length 12' 13' 14' 15' 20' 3/8" Blue – 1-wire with Bend Restrictors One End PSI Part No 4000 4000 4000 4000 4000 8.918-361.0 8.918-367.0 8.918-368.0 8.918-372.0 8.918-376.0 Length 12' 15' 16' 18' 20' 3000 3000 3000 3000 3000 1/4" Blue – 1-wire w/o Bend Restrictors PSI Part No 8.918-387.0 8.918-389.0 8.918-391.0 8.918-393.0 8.918-395.0 8.918-397.0 8.918-399.0 8.918-401.0 8.918-403.0 8.918-405.0 8.918-407.0 8.918-409.0 8.918-411.0 8.918-413.0 Length 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 1/4" Blue – 1-wire with Bend Restrictors One End PSI Part No 8.918-388.0 8.918-390.0 8.918-392.0 8.918-394.0 8.918-396.0 8.918-398.0 8.918-400.0 8.918-402.0 8.918-404.0 8.918-406.0 8.918-408.0 8.918-410.0 8.918-412.0 8.918-414.0 Page 59 Length 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000

HOSE & HOSE REELS Legacy Stackable Hose Reels Hose reels built specifically for contractors who require flexibility on a job site. Stackable reels are supported on both sides of the central hub to accommodate more aggressive applications, such as trailer-mounted. ! Integrated frame adds protection and stacking ability ! Stacked up to 3 high ! Heavy-duty powder-coated steel or stainless steel ! Reel and swivel rated up to 6000 PSI and 350°F ! Modular design is able to configure for various needs ! Reversible hand-crank and swivel Part No 200' Mild Steel Stackable Hose Reel 100' Mild Steel Stackable Hose Reel 9.801-767.0 9.801-768.0 9.801-769.0 9.801-770.0 Description Stackable Hose Reel, Mild Steel, 100' Stackable Hose Reel, Mild Steel, 200' Stackable Hose Reel, Stainless Steel, 100' Stackable Hose Reel, Stainless Steel, 200' NOTE: Hose not included Part No 8.923-415.0 8.923-427.0 8.923-416.0 8.923-918.0 Description Hose Guide, 100' Reel Hose Guide, 200' Reel Hose Reel Riser Reel Cart System Options Stainless Steel Stackable Hose Reel 200' Mild Steel Stackable Hose Reel with Optional Hose Guide and Hose Reel Riser 200' Mild Steel Stackable Hose Reels with Optional Reel Cart System and Hose Guide Reel Cart System Hose Reel Riser Hose Guide *Patent D739,715S and other Patents Pending Page 60

HOSE & HOSE REELS Legacy Hose Reels Legacy hose reels were designed for ease of use and durability in commercial pressure washer applications. Offering 100' and 200' reels in both a fixed base and 360 degree rotating base. The oversized reel holds the advertised length plus leaves additional space reducing the difficulty of reeling hose. The unique extended swivel improves the hose connection and reduces hose wear and stress. ! 5000 PSI ! 325°F ! 100'- and 200'-fixed base ! 100'- and 200'-360° rotating base ! High-pressure, double-seal swivels ! Reels equipped for 3/8" hose. Easily convertible to 1/2" hose with the change to a 1/2" swivel ! 2-year warranty Part No Fixed Base Hose Reel 360° Pivot Reel Bracket Sockets 8.750-485.0 8.750-482.0 8.750-476.0 8.750-479.0 Description Pivot Reel, 100' x 3/8" Pivot Reel, 200' x 3/8" Fixed Based, 100' x 3/8" Fixed Based, 200' x 3/8" NOTE: Hose not included Part No Universal Mount Skid Mount Non-Pivot Reel Brackets Wall Mount Base Mount 8.919-430.0 8.919-794.0 8.919-437.0 8.919-434.0 8.919-072.0 8.919-445.0 8.919-441.0 8.919-448.0 Universal 90° 45° Legacy Hose Reel Swivels ! Innovative design ! 5000 PSI ! Stainless-steel rotor ! Unique dual seal for extra long life ! 2-year warranty Swivels Part No 9.118-021.0 9.118-022.0 9.118-023.0 9.118-024.0 9.118-025.0 9.118-026.0 9.118-027.0 9.118-028.0 Inlet x Outlet 1/2" M x 3/8" F 1/2" F x 3/8" F 3/8" M x 3/8" F 3/8" F x 3/8" F 1/2" M x 1/2" F 1/2" F x 1/2" F 3/8" M x 1/2" F 3/8" F x 1/2" F Universal Repair Kit Part No 8.776-001.0 Extended Swivels Part No 9.118-020.0 9.118-029.0 9.118-030.0 9.118-031.0 9.118-034.0 9.118-035.0 9.118-032.0 9.118-033.0 Inlet x Outlet 1/2" M x 3/8" F 1/2" F x 3/8" F 3/8" M x 3/8" F 3/8" F x 3/8" F 1/2" F x 1/2" F 1/2" M x 1/2" F 3/8" F x 1/2" F 3/8" M x 1/2" F ! Limits bend and hose stress ! 5000 PSI ! Stainless-steel rotor ! Unique dual seal for extra long life ! 2-year warranty Vertical Description Universal Mount Skid Mount Wall Mount Base Mount Bracket, Universal Bracket, 90° Bracket, 45° Bracket, Vertical Page 61

HOSE & HOSE REELS AP Hose Reels AP hose reels have been designed to perfectly balance ruggedness and durability with affordability. ! Flared flanges for maximum capacity ! Solid center core for maximum strength ! Rolled, beaded-edge flanges for maximum safety ! Easy mounting options for maximum versatility ! “Posi-Pin” lock prevents unwanted dereeling ! Heavy-duty powder-coated steel Part No Swivel Repair Kits Part No 8.900-855.0 Old No 110025 8.711-192.0 9.804-067.0 8.711-199.0 8.711-201.0 8.712-460.0 8.712-469.0 8.754-280.0 8.700-188.0 Old No 386188 386191 386206 386209 421043 421063 421045 4-0203612 Hose Dia 3/8" 3/8" 3/8" 1/2" Capacity (in feet) 50 100 150 100 ! Easy access external swivel ! 4000 PSI working pressure ! Rated temperature: 225°F ! 3/8" or 1/2" inlet/outlet Core Width 4.3 8.7 6.3 6.3 Flange Width 7.9 12.2 10.2 10.2 Flange 10.5 13.0 13.0 Replacement Swivel for Part No 8.711-192.0 and 9.804-067.0 Replacement Swivel for Part No 8.711-199.0 Replacement Swivel for Part No 8.711-201.0 Replacement Handle NOTE: Hose is not included. See page 59 for connector hose. ! Super-reinforced core — won’t collapse! ! Adjustable brake for controlled reel tension ! Convenient external swivel ! Manual rewind handle included ! Solid core bolts on to flanges for extra strength Professional Size Reel Part No Swivel Repair Kits Part No 8.700-287.0 8.700-285.0 8.900-855.0* *For Round Swivels Replacement Swivels – see page 67. 8.711-182.0 8.711-183.0 8.711-184.0 8.711-189.0 8.711-190.0 8.715-921.0 Old No 075130 075128 110025 Dia 3/8" 1/2" Old No 386174 386175 386176 386181 386182 600975T Space Saver Reel Part No 8.711-179.0 8.711-180.0 8.711-181.0 8.711-186.0 8.711-187.0 Old No 386171 386172 386173 386178 386179 Hose Dia 3/8" 3/8" 3/8" 1/2" 1/2" Capacity (in feet) 90 140 200 115 150 Reel Size Reel Size Width 6" 10" 14" 10" 14" Diameter 14" 14" 14" 14" 14" NOTE: Hose is not included. Interchangeable parts available. See page 59 for connector hose. Hose Dia 3/8" 3/8" 3/8" 1/2" 1/2" Capacity (in feet) 150 300 350 200 270 Reel Size Reel Size Width 6" 10" 14" 10" 14" Diameter 18" 18" 18" 18" 18" Replacement Brake for Part No 8.711-182.0 and 8.711-183.0 NOTE: Hose is not included. Interchangeable parts available. See page 59 for connector hose. ! 225°F max temperature ! Snap-lock to prevent accidental dereeling ! Bearings have oil cap for easy field Maintenance ! 4000 PSI working pressure Overall Diameter Height 10.5 13.0" 13.0" 16.7" 16.7" Page 62

HOSE & HOSE REELS Coxreels Hose Reels Coxreels offer high performance in a very compact and lightweight hand crank or spring-driven hose reel. Perfect for mobile application and permanent floor and wall mount. ! Rated up to 4000 PSI ! -20°F to 225°F Part No 8.711-858.0 8.711-858.0 8.711-860.0 9.802-265.0 8.711-591.0 8.711-588.0 8.723-649.0 8.705-132.0 8.750-020.0 8.711-584.0 8.711-585.0 Old No 4-02750001 4-02750002 4-02750003 4-020369 4-020366 87236490 140407 4-020362 4-020363 ! Adjustable drag brake ! 90° brass swivel Description 200' x 1/2" (300' x 3/8" with Adapter) 100' x 3/8" 150' x 3/8" Handle Replacement Locking Pin Assy 50' x 3/8" Spring Driven 1/2" to 3/8" Adapter (for 8.711-858.0) Ball Stop for 8.723-649.0 Replacement Swivel, 1/2" Replacement Swivel, 3/8" ! Spring Driven Hose Reel ! Lightweight, compact design ! Adjustable drag break ! Sturdy U-shaped frame ! Up to 4000 PSI ! Rolled edges and ribbed discs provide strength and safety ! Pro-grade heavy-duty steel ! 2-year mfg. limited warranty 9.802-265.0 4000 PSI 3000 4000 4000 8.723-649.0 (hose and ball stop not included) Page 63

COUPLERS, FITTINGS & FILTERS Quick Couplers Brass Couplers, designed for 4000 PSI and extended durability. Affordable and rugged all in one. Old No Part No 9.802-164.0 9.802-166.0 8.707-166.0 9.802-165.0 9.802-169.0 8.707-167.0 ! Precision brass design ! Stainless-steel band for increased durability (except 1/2") ! Unrestricted free-flow ! 4000 PSI max Case Lot Part No 8.916-538.0 8.916-537.0 8.916-542.0 8.916-541.0 2-2000 2-2002 2-20180 2-2001 2-2003 2-20181 Description 1/4" FPT8.916-538.0 3/8" FPT8.916-537.0 1/2" FPT 1/4" MPT8.916-542.0 3/8" MPT8.916-541.0 1/2" MPT Description Case of 200 Couplers, 1/4" FPT Case of 200 Couplers, 3/8" FPT Case of 200 Couplers, 1/4" MPT Case of 200 Couplers, 3/8" MPT Steel Nipples, hardened steel combined with zinc yellow chromate plating holds up to the harshest environments. Part No ! Zinc-plated ! Hardened steel ! 4000 PSI max 8.707-136.0 8.707-137.0 9.802-170.0 8.707-165.0 8.707-139.0 9.802-171.0 8.707-164.0 Old No 2-2004 2-20040 2-2006 2-2018 2-2005 2-2007 2-2017 Case Lot Part No Description 8.916-361.0 8.916-536.0 8.916-540.0 8.916-539.0 Description 1/4" FPT8.916-361.0 1/4" x 1/8" FPT 3/8" FPT8.916-536.0 1/2" FPT 1/4" MPT8.916-540.0 3/8" MPT8.916-539.0 1/2" MPT Case Lot Part No Case of 200 Nipples Case of 200 Nipples Case of 200 Nipples Case of 200 Nipples Case Lot Part No Case of 200 Couplers Case of 200 Couplers Case of 200 Couplers Case of 200 Couplers Case of 200 Nipples, 1/4" FPT Case of 200 Nipples, 3/8" FPT Case of 200 Nipples, 1/4" MPT Case of 200 Nipples, 3/8" MPT Stainless-Steel Quick Couplers Part No ! Chemical-resistant ! 303 stainless-steel ! 6000 PSI O-Rings O-Rings for AP, Hansen, Foster, Parker, and other quick-coupler brands. Buna to 210°F, EPDM to 280°F and Viton to 300°F and aggressive chemicals. QC EPDM Part No 8.900-026.0 9.802-098.0 9.802-102.0 Old No 075033 075035 075037 QC Size 1/8" 1/4" 3/8" QC Buna Part No 8.900-027.0 8.702-017.0 8.900-030.0 Old No 075034 075036 075038 QC Size 1/4" 3/8" 1/2" QC Viton Part No 8.702-084.0 8.702-088.0 8.900-032.0 Old No 075042 075041 075040 QC Size 1/4" 3/8" 1/2" 8.707-110.0 8.707-135.0 8.707-140.0 8.707-152.0 8.707-103.0 8.707-125.0 8.707-138.0 8.707-144.0 Old No 2-2001SS 2-2003SS 2-20051 2-20071 2-2000SS 2-2002SS 2-20041 2-20061 Description 1/4" MPT Stainless-steel Couplers 3/8" MPT Stainless-steel Couplers 1/4" MPT Stainless-steel Nipples 3/8" MPT Stainless-steel Nipples 1/4" FPT Stainless-steel Couplers 3/8" FPT Stainless-steel Couplers 1/4" FPT Stainless-steel Nipples 3/8" FPT Stainless-steel Nipples Page 64

COUPLERS, FITTINGS & FILTERS Quick Connective Couplers - Foster ! Precision performance ! Unrestricted bore for free flow ! Resists plug deformation when pressure spikes occur and withstands pump pulse Quick Couplers - 11,000 PSI Snaptite Quick Sockets and Plugs are precision-built for extreme high pressure. ! 11,000 PSI max ! -40°F to 250°F ! Zinc chromate Part No 8.756-030.0 8.756-031.0 8.756-032.0 8.756-033.0 8.756-034.0 8.756-035.0 8.756-036.0 8.756-037.0 8.756-038.0 8.756-039.0 8.756-040.0 8.756-041.0 8.756-042.0 Description Coupler, 1/4" Socket, Male, Brass Coupler, 1/4" Socket, Female, Brass Coupler, 3/8" Socket, Male, Brass Coupler, 3/8" Socket, Female, Brass Coupler, 1/2" Socket, Female, Brass Coupler, 1/4" Plug, Male, Steel Coupler, 1/4" Plug, Female, Steel Coupler, 3/8" Plug, Male, Steel Coupler, 3/8" Plug, Female, Steel Coupler, 3/8" Plug, Male, S/S Coupler, 3/8" Plug, Female, S/S Coupler, 1/2" Plug, Male, Steel Coupler, 1/2" Plug, Female, Steel Part No 8.707-115.0 8.707-116.0 9.802-167.0 8.707-117.0 8.707-121.0 9.802-168.0 8.707-120.0 9.804-043.0 8.706-712.0 Old No 2-20023 2-200231 2-20021 2-20024 2-20028 2-20022 2-20027 2-0132 2-01321 Description 1/4" FPT Socket 1/4" MPT Socket 3/8" FPT Socket 1/4" FPT Plug 1/4" MPT Plug 3/8" FPT Plug 3/8" MPT Plug 1/4" SEAL, U-Pack 3/8" SEAL, U-Pack Couplers - Quick Connective Pressure Rating Service Steel Plug Series 1/8" 1/4" 3/8" 1/2" 3/4" Part No 8.709-436.0 8.709-463.0 8.709-462.0 8.709-438.0 8.709-444.0 8.709-564.0 8.709-457.0 8.709-478.0 8.709-479.0 8.709-502.0 8.709-509.0 8.709-486.0 8.709-488.0 8.709-480.0 8.709-481.0 PSI 2600 5500 3500 2700 1700 Old No 331010 331045 331044 331012 331017 331413 331031 331110 331111 331127 331144 331117 331118 331112 331113 Brass Plug PSI 2500 5200 2700 2200 1700 Description 1/8" MPT Brass Coupler Socket 3/4" MPT Brass Coupler Socket 3/4" FPT Brass Coupler Socket 1/8" Stainless-Steel MPT Coupler Socket 1/4" Stainless-Steel FPT Coupler Socket 3/8" Stainless-Steel FPT Coupler Socket 1/2" Stainless-Steel FPT Coupler Socket 1/8" MPT Plugs, Steel, Zinc-plated 1/8" FPT Plugs, Steel, Zinc-plated 3/4" MPT Plugs, Steel, Zinc-plated 3/4" FPT Plugs, Steel, Zinc-plated 1/4" MPT Plugs, Hardened Stainless-Steel 1/4" FPT Plugs, Hardened Stainless-Steel 1/2" MPT Plugs, Hardened Stainless-Steel 1/2" FPT Plugs, Hardened Stainless-Steel 4200 6700 6300 3000 1700 Stainless-steel PSI Twist Seal Couplers Allows U.S.-standard hose to connect to Eu ro pe an (22mm) fittings. ! Internal O-ring seal ! Machined-brass body ! High-impact plastic knob ! 7.8 GPM max flow Part No 8.709-522.0 8.709-530.0 9.802-173.0 8.709-526.0 8.709-601.0 8.709-554.0 (Not threaded) ! 3600 PSI max pressure ! 302°F max temperature ! Not threaded Old No 331205 331207 331204 331206 331710 Description 1/4" FPT 3/8" FPT 1/4" MPT 3/8" MPT 3/8" QD Plug 3/8" QD Plug Plugs are made of heavy-duty machined-brass for a safe and leak-free connection. Part No 8.709-540.0 8.709-546.0 8.709-536.0 8.707-185.0 O-rings, Viton Part No 8.756-782.0 Old No 331305 331307 331304 331306 Old No Description 1/4" FPT 3/8" FPT 1/4" MPT 3/8" MPT Description O-rings (Viton) Page 65

COUPLERS, FITTINGS & FILTERS Twist Seal Couplers Double Shut-Off Couplers and Plugs Couples U.S.-standard pipe threads to 22mm Eu ro pe an fittings found on imported pressure washers. ! Internal O-ring with back ring seal assures no-leak operation ! Oversized high-impact plastic knob ! Machined-brass body ! 7.8 GPM max flow ! 4000 max pressure ! 302°F max temperature ! 3.9 to 4.2 oz weight ! Quick disconnect without drips and leaks ! Indispensable for in-plant multiple station systems ! Machined-construction brass, zinc-plated steel or stainless-steel 8.709-556.0 Part No Sockets Part No 8.709-524.0 8.709-531.0 8.709-534.0 8.709-521.0 8.709-528.0 8.709-533.0 Old No 331205PA 331207PA 331209PA 331204PA 331206PA 331208PA Description 1/4" FPT 3/8" FPT 1/2" FPT 1/4" MPT 3/8" MPT 1/2" MPT 8.709-556.0 8.756-043.0 8.756-044.0 8.709-559.0 8.709-560.0 8.709-561.0 8.709-562.0 8.709-580.0 8.709-583.0 8.709-584.0 8.709-582.0 Old No 331401 331405 331406 331407 331408 331409 331410 331501 331507 331508 331506 Description 1/8" FPT Socket (Brass) 1/4" FPT Socket (Brass) 3/8" FPT Socket (Stl Zinc) 3/8" FPT Socket (Brass) 1/2" FPT Socket (Brass) PSI 3000 2700 3700 2200 2250 1/2" FPT Socket (Stainless-Steel) 4250 3/4" FPT Socket (Brass) 1/8" FPT Plugs (Brass) 3/8" FPT Plugs (Brass) 1/2" FPT Plugs (Brass) 2000 3000 2200 2250 3/8"" FPT Plugs (Steel / Zinc) 2250 8.709-580.0 Foster Double Shut-Off Quick Couplers Plugs Part No 8.709-542.0 8.709-548.0 8.709-553.0 8.709-539.0 8.709-551.0 Old No 331305PA 331307PA 331309PA 331304PA 331308PA Description 1/4" FPT 3/8" FPT 1/2" FPT 1/4" MPT 1/2" MPT Part No 8.756-043.0 8.756-044.0 8.756-843.0 8.756-844.0 Description Coupler Socket, Double Shut Off, 1/4" FPT Brass Coupler Plus, Double Shut Off, 1/4" FPT Brass ! Nitrile up to 210°F ! Use Viton for 230°F and above Replacement O-rings Part No O-rings Part No 8.704-036.0 8.704-037.0 Old No 109286 109287 Description O-rings, 22 mm viton Back Ring, 2.4 x 9.3 Extended Twist Seal Coupler ! PSI: 3600 ! GPM: 11 ! Temperature: 300°F ! Double O-ring seal ! Machined-brass body ! High-impact plastic knob Part No 8.709-535.0 8.709-555.0 Old No 331215 331315 Description Coupler – 1/4" FPT x 22 mm F Plug – 1/4" FPT x 22 mm M Page 66 8.701-994.0 8.702-015.0 8.702-017.0 8.702-021.0 8.702-084.0 8.702-088.0 8.702-090.0 8.702-023.0 Old No 0RN013 0RN110 0RN112 0RN114 0RV110 0RV112 0RV114 0RN115 Description O-ring 1/8" Nitrile O-ring 1/4" Nitrile O-ring 3/8" Nitrile O-ring 1/2" Nitrile O-ring 1/4" Viton O-ring 3/8" Viton O-ring 1/2" Viton O-ring 3/32" Nitrile (for kit 1) Quick Couplers - Brass Designed for 4000 PSI and extended durability. EPDM O-rings as standard. Affordable and rugged all in one. Part No 8.750-695.0 8.750-696.0 8.750-697.0 8.750-698.0 Description Coupler 1/4" Socket FPT Coupler 1/4" Socket MPT Coupler 3/8" Socket FPT Coupler 3/8" Socket MPT

COUPLERS, FITTINGS & FILTERS Swivels - 90° Excellent for car wash booms and hose reels. Remarkable value, comparable to best swivels made. ! Forged-brass body ! 4000 PSI ! 225°F ! Nitrile O-ring Part No Part No 8.712-460.0 8.712-461.0 8.712-462.0 8.712-463.0 8.712-464.0 8.712-469.0 8.900-855.0 Old No 421043 421044 421045 421046 421047 421063 110025 Description 3/8" M x 3/8" F 3/8" F x 3/8" F 1/2" M x 1/2" F 1/2" F x 1/2" F 1/2" M x 3/8" F 3/8" F x 3/4" M w/ 3/8" inside thread Repair Kit 8.712-467.0 8.712-466.0 Old No 421057 421056 Gun Swivel Made of corrosion-resistant material and stainless-steel, self-lubricated bearings, the new gun swivel offers highest-quality Swissmade craftsmanship. ! 4000 PSI ! 250°F temperature ! 30 RPM Description Gun Swivel DGV – 1/4" NPTF Gun Swivel DGV – 3/8" NPTF Swivels Swivels – Right Angle Part No 8.904-551.0 8.904-552.0 8.904-554.0 8.900-764.0 8.900-765.0 8.712-449.0 ! 360° swivel rotation ! 3000 PSI max pressure (brass) ! 5000 PSI max pressure (stainless-steel) Part No 8.712-448.0 8.712-450.0 8.712-449.0 8.700-287.0 8.700-285.0 Old No 421018 421020 421019 075143 075128 Description Swivel – Stainless-steel 3/8" Swivel – Brass 3/8" Swivel – Brass 1/2" Repair Kit – 3/8" for 421018 and 421020 Repair Kit – 1/2" for 421019 Part No Swivels - Stainless-Steel, High-Pressure and Economy Brass ! 10.5 GPM max flow (stainless-steel) ! 7.8 GPM max flow (brass) ! 320°F max temperature (stainless-steel) ! 195°F max temperature (brass) ! Highly resistant to harsh chemicals ! “Live” swivel at full pressure ! 6 oz weight Part No 8.712-456.0 8.712-455.0 8.712-443.0 8.704-096.0 Old No 421030 421025 421009 109542 Description Swivel, Stainless-Steel – 1/4" M x F Swivel, Stainless-Steel – 3/8" M x F Swivel, Brass – 3/8" M x F Repair Kit for 8.712-456.0 and 8.712-455.0 PSI 5600 5600 3600 8.712-446.0 8.712-447.0 8.900-764.0 8.900-765.0 Old No 421016 421017 109198 109199 8.712-448.0 *Long body style Old No 421010A 421012A 421015 109198 109199 ! Swivels even at 3000 PSI ! Brass housing ! Stainless-steel flow-through bolt ! Close-tolerance fit ensures leakproof seal ! Teflon ® ring provides free swivel Description 3/8" MPT x FPT* 3/8" FPT x FPT* 3/8" FPT x FPT, Brass Seal Kit Rebuild Kit Swivels - Stainless-Steel ! Swivels even at 4000 PSI ! 200°F max temperature ! All stainless construction ! Teflon ® swivel ring ! Rebuildable ! 3/8" in and out Description 3/8" MPT x FPT 3/8" FPT x FPT Seal Kit Rebuild Kit Page 67

COUPLERS, FITTINGS & FILTERS Swivels – Ball Bearing Swivels freely even at maximum pressure level noted below. ! MPT x FPT all sizes ! Brass and stainless-steel materials Part No 8.712-438.0 8.712-439.0 8.712-440.0 8.712-441.0 8.712-479.0 8.700-263.0 Old No 421004 421005 421006 421007 421080 075060 Description 1/4" 1/4" 3/8" 3/8" 1/4" 90° Repair Kit 8.712-438.0 PSI 2000 3500 2000 3500 3500 Hex Couplings - Reducing – Brass Part No Swivels – Stainless-Steel Ball Bearing ! Hardened, stainless-steel body ! Nitrile Buna seals ! 3500 PSI max pressure ! 180°F max temperature ! M x F NPT thread ! Ball-bearing design ensures free swivel action under pressure ! Suitable for extended-wear application Part No 8.712-457.0 8.700-460.0 8.712-458.0 8.700-459.0 8.712-459.0 8.700-461.0 Old No 421034 076102 421036 076101 421038 076103 Description 1/4", 6.8 GPM Repair Kit for 8.712-457.0 3/8", 10.6 GPM Repair Kit for 8.712-458.0 1/2", 27.0 GPM Repair Kit for 8.712-459.0 8.705-155.0 8.705-156.0 8.705-157.0 8.705-158.0 8.705-159.0 Old No 140502 140504 140505 140506 140508 Description 1/4" x 1/8" F 3/8" x 1/4" F 1/2" x 1/4" F 1/2" x 3/8" F 3/4" x 1/2" F Hex Nipples – Double – Brass Part No 8.705-224.0 9.802-108.0 8.705-228.0 9.803-989.0 8.705-233.0 8.705-234.0 Old No 140752 140754 140756 140758 140762 140764 Description 1/8" x 1/8" M 1/4" x 1/4" M 3/8" x 3/8" M 1/2" x 1/2" M 3/4" x 3/4" M 1" x 1" M 8.712-479.0 Hex Couplings – Brass Part No 8.705-150.0 8.705-151.0 8.705-152.0 8.705-153.0 8.705-154.0 Old No 140452 140454 140456 140458 140462 FPT 1/8" 1/4" 3/8" 1/2" 3/4" JIC Swivels Part No Adapters – Brass Part No 8.705-186.0 9.803-054.0 8.705-188.0 8.705-185.0 9.804-007.0 8.705-190.0 8.705-192.0 8.705-191.0 9.802-148.0 8.705-194.0 8.705-195.0 Old No 140651 140652 140653 140650 140654 140655 140657 140656 140658 140660 140662 FPT x MPT 1/8" x 1/8" 1/4" x 1/8" 1/4" x 1/4" 3/8" x 1/8" 3/8" x 1/4" 3/8" x 3/8" 1/2" x 1/4" 1/2" x 3/8" 1/2" x 1/2" 3/4" x 1/2" 3/4" x 3/4" 9.802-153.0 9.802-151.0 9.802-152.0 9.802-048.0 8.706-315.0 Description 1/4" Barb x 1/4" JIC FPT, Brass 1/2" Barb x 1/2" JIC FPT, Brass 3/4" Barb x 3/4" JIC FPT, Brass 1/2" JIC FPT x 3/8" MPT, Steel 1/2" JIC FPT x 1/2" MPT, Steel 9.802-151.0 Nipples – Brass Old No Part No Bushings – Brass Part No 9.803-564.0 8.705-129.0 9.804-015.0 9.802-135.0 8.705-132.0 8.705-133.0 9.802-136.0 Old No 140402 140404 140406 140407 140410 140411 MPT X FPT 1/4" x 1/8" 3/8" x 1/4" 3/8" x 1/8" 1/2" x 1/4" 1/2" x 3/8" 3/4" x 3/8" 3/4" x 1/2" Page 68 8.705-201.0 8.705-204.0 8.705-211.0 9.802-109.0 8.705-220.0 8.705-202.0 8.705-203.0 8.705-205.0 8.705-206.0 8.705-207.0 8.705-212.0 8.705-213.0 8.705-214.0 8.705-217.0 8.705-218.0 8.705-221.0 8.705-222.0 2-1000 2-1002 2-1004 2-1006 2-1008 140703 140705 140711 140712 2-1010 140721 140723 2-10051 140731 140733 140742 140744 Description 1/8" Close 1/4" Close 3/8" Close 1/2" Close 3/4" Close 1/8" x 1-1/2" 1/8" x 2-1/2" 1/4" x 1-1/2" 1/4" x 2" 1/4" x 2-1/2" 3/8" x 1-1/2" 3/8" x 2-1/2" 3/8" x 3" 1/2" x 1-1/2" 1/2" x 3" 3/4" x 2" 3/4" x 3" Nipple Close

COUPLERS, FITTINGS & FILTERS Hex Reducing Nipples – Brass Part No 8.705-225.0 8.705-223.0 8.705-227.0 Description 1/4" x 1/8"M 3/8" x 1/8"M 3/8" x 1/4"M Part No 8.705-229.0 9.803-276.0 9.803-556.0 Description 1/2" x 1/4"M 1/2" x 3/8"M 3/4" x 1/2"M Male Branch Tees – Brass Part No 9.802-120.0 8.705-254.0 Description 1/4" 3/8" Part No 8.705-255.0 Description 1/2" Elbows – 90° – Brass Part No 8.705-160.0 8.705-161.0 9.802-113.0 9.803-265.0 8.705-164.0 8.705-169.0 8.705-171.0 8.705-173.0 9.802-129.0 9.802-031.0 Old No 140552 2-1018 2-1019 2-1020 2-1021 140584 140586 140588 2-1060 2-1062 Reducing Elbows 8.705-165.0 8.705-166.0 8.705-168.0 8.705-167.0 8.705-170.0 8.705-172.0 2-10410 140577 140583 140582 140585 140587 Street Tees – Brass Description 1/8" FPT 1/4" FPT 3/8" FPT 1/2" FPT 3/4" FPT 1/4" x 1/4" MPT 3/8" x 3/8" MPT 1/2" x 1/2" MPT 1/2" JIC x 3/8" MPT 1/2" JIC x 1/2" MPT 1/4" FPT x 1/8" FPT 3/8" FPT x 1/4" FPT 1/4" x 1/8" MPT 3/8" x 1/8" MPT 3/8" x 1/4" MPT 1/2" x 3/8" MPT Part No 8.705-196.0 8.705-197.0 Description 1/4" 3/8" Part No 9.802-121.0 8.705-257.0 Description 1/4" 3/8" Part No 9.802-122.0 8.705-259.0 Description 1/2" 3/4" Female Crosses – Brass Extruded Part No 8.705-198.0 8.705-199.0 Description 1/2" 3/4" Check Hose Barbs JIC x Pipe Nipples Size Part No 8.706-265.0 9.802-037.0 9.802-036.0 9.802-038.0 1/2" JIC x 1/4" FPT 1/2" JIC x 3/8" FPT 1/2" JIC x 3/8" MPT 1/2" JIC x 1/2" MPT Part No 8.904-389.0 8.904-390.0 Old No 385128 385129 Description Check Hose Barb – Viton Check Hose Barb – Buna ! 1/4" MPT x 1/4" barb ! Brass body ! Buna or Viton check ball JIC Nipples – Brass Street Elbows – Brass Part No 8.705-174.0 9.803-839.0 9.802-114.0 9.802-115.0 9.803-555.0 Description – 90° 1/8" M x F 1/4" M x F 3/8" M x F 1/2" M x F 3/4" M x F Part No 8.705-180.0 8.705-181.0 8.705-182.0 8.705-183.0 8.705-184.0 Description – 45° 1/8" M x F 1/4" M x F 3/8" M x F 1/2" M x F 3/4" M x F 9.802-128.0 Part No Extruded or Forged Tees – Brass Part No 8.705-246.0 8.705-247.0 8.705-248.0 Description 1/8" F 1/4" F 3/8" F Part No 9.802-117.0 8.705-251.0 Description 1/2" F 3/4" F 8.706-872.0 9.802-127.0 9.802-128.0 8.706-877.0 8.706-894.0 8.706-895.0 8.706-896.0 8.706-897.0 8.706-899.0 8.706-971.0 Page 69 Description 1/2" JIC x 1/4" MPT 1/2" JIC x 3/8" MPT 1/2" JIC x 1/2" MPT 1/2" JIC x 3/4" MPT 1/2" JIC x 1/2" FPT 1/2" JIC x 3/8" FPT 1/2" JIC x 1/4" FPT 1/2" JIC x 3/4" FPT 3/4" JIC x 3/4" Pipe MPT 1/2" JIC x 3/4" GHF 8.706-894.0

COUPLERS, FITTINGS & FILTERS Hose Barbs – Brass Swivel Hose Barbs – Low Pressure Part No 90° Barb x MPT 9.802-142.0 9.802-143.0 8.705-118.0 8.705-119.0 8.705-120.0 8.705-121.0 8.705-122.0 8.705-123.0 8.705-125.0 8.705-126.0 Barb x MPT 8.705-097.0 9.802-137.0 9.802-138.0 8.705-102.0 8.705-108.0 8.705-098.0 8.705-104.0 8.705-105.0 8.705-103.0 8.705-100.0 8.705-110.0 8.705-106.0 8.705-109.0 8.705-111.0 8.705-107.0 9.802-140.0 8.705-113.0 8.705-114.0 8.705-115.0 8.706-949.0 Push-N-Lock Barbs Part No Normally requires no clamps 8.705-069.0 8.705-070.0 8.705-071.0 8.705-072.0 8.705-073.0 8.705-074.0 8.705-075.0 8.705-076.0 8.705-077.0 9.802-156.0 8.705-079.0 8.705-080.0 8.705-081.0 8.705-082.0 8.705-083.0 8.705-084.0 8.705-085.0 Barb x Barb 8.705-064.0 8.705-065.0 8.705-066.0 8.705-067.0 8.705-068.0 Old No 140252 140254 140255 140256 140257 140258 140259 140260 140261 140262 140263 140264 140265 140266 140267 140268 140269 140200 140204 140208 140210 140212 Barb x MPT 1/4" x 1/8" 1/4" x 1/4" 1/4" x 3/8" 3/8" x 1/8" 3/8" x 1/4" 3/8" x 3/8" 3/8" x 1/2" 3/8" x 3/4" 1/2" x 1/4" 1/2" x 3/8" 1/2" x 1/2" 1/2" x 3/4" 5/8" x 3/8" 5/8" x 1/2" 5/8" x 3/4" 3/4" x 1/2" 3/4" x 3/4" Barb x Barb 1/4" x 1/4" 3/8" x 3/8" 1/2" x 1/2" 5/8" x 5/8" 3/4" x 3/4" Page 70 Old No 140369 140370 140371 140372 140374 140375 140376 140377 140379 140384 140350 140352 140354 140355 140361 140351 140357 140358 140356 140353 140363 140359 140362 140364 140360 140365 140366 140367 140368 Barb x MPT – 90° 1/4" x 1/8" 1/4" x 1/4" 3/8" x 1/4" 3/8" x 3/8" 3/8" x 1/2" 1/2" x 1/4" 1/2" x 3/8" 1/2" x 1/2" 5/8" x 3/8" 5/8" x 1/2" Barb x MPT 1/8" X 1/4" 1/4" X 1/8" 1/4" x 1/4" 1/4" x 3/8" 1/4" x 1/2" 3/8" x 1/8" 3/8" x 1/4" 3/8" x 3/8" 3/8" x 1/2" 3/8" x 3/4" 1/2" x 1/4" 1/2" x 3/8" 1/2" x 1/2" 1/2" x 3/4" 5/8" x 3/8" 5/8" x 1/2" 5/8" x 3/4" 3/4" x 1/2" 3/4" x 3/4" Barb x FPT 1/4" X 1/4" ! 300 PSI max pressure ! 210°F max temperature ! Brass MPT base with steel hose barb Part No 8.705-050.0 8.705-052.0 8.705-053.0 ! Swivel easily at low pressure to eliminate twists and tangles in chemical or water lines Old No 140079 140081 140083 Description 1/4" x 1/4" 3/8" x 3/8" 1/2" x 1/2" Orificed Hose Barb ! Inexpensive way to create suction on inletside of pump ! Used in-line from float tank to pump ! One-piece, machined-brass ! 3/8" MPT x 5/8" barb Part No 8.705-093.0 Old No 140320 Description Orificed Hose barb ! Standard orifice 5/32" — drill up to 3/8" to fit your need Drain Cocks Part No 8.705-060.0 8.705-061.0 Old No 140125 140127 Description 1/4" Fuel Drain w/ Tee Handle 1/4" Fuel Drain w/ Barb and Tee Handle Hex Head Plugs Part No 8.705-236.0 8.705-238.0 8.705-240.0 9.803-673.0 8.705-244.0 Old No 140802 140804 140806 140808 140810 Description 1/8" 1/4" 3/8" 1/2" 3/4" Hex Socket Head Plugs Part No 9.803-051.0 9.802-124.0 8.705-241.0 8.705-243.0 Old No 140802A 140804A 140806A 140808A Description 1/8" 1/4" 3/8" 1/2" Pipe Thread Hex Nuts Part No 8.705-041.0 8.705-042.0 8.705-043.0 8.705-044.0 8.705-045.0 Old No 140062 140064 140065 140067 140070 Description 1/8" 1/4" 3/8" 1/2" 3/4"

COUPLERS, FITTINGS & FILTERS Garden Hose Fittings ! MGH = male garden hose ! FGH = female garden hose ! Heavy-duty, machined-brass fittings Part No 8.901-292.0 8.901-292.0 8.901-291.0 8.705-033.0 9.802-146.0 8.705-034.0 8.705-034.0 8.705-035.0 8.705-008.0 8.705-009.0 8.705-010.0 Old No Swivel Fittings – 3/4" FGH 8.705-032.0 140050 140056 140051 140052 Description 1/4" MPT 3/8" MPT 1/2" MPT 1/2" FPT (S-1) 3/4 FGH Swivel w/ 1/2" MPT Strainer 140054 140055 140002 140004 140006 Garden Hose Quick Couplers 8.709-460.0 8.709-508.0 8.709-460.0 331040 331140 Garden Hose Accessories 8.705-016.0 9.804-016.0 Solid Fittings 8.705-024.0 9.804-016.0 9.802-145.0 9.802-145.0 8.705-026.0 8.705-019.0 8.705-020.0 8.705-022.0 8.705-023.0 8.705-018.0 Hose Barb Fittings 8.705-086.0 8.705-087.0 8.705-087.0 8.705-088.0 8.705-089.0 8.705-091.0 8.705-092.0 8.705-094.0 8.705-095.0 140020 140015 140036 140038 140040 140028 140030 140032 140034 140026 3/4" FPT (S-2) 3/4" FGH (S-3) 1/2" Barb 5/8" Barb 3/4" Barb Female Hose Coupler Male Hose Plug Garden Hose Washer Filter Screen Washer (30-mesh) 3/4" MGH x 3/8" MPT 3/4" MGH x 1/2" MPT 3/4" MGH x 3/4" MPT 3/4" FGH x 1/2" FPT 3/4" FGH x 3/4" FPT 3/4" FGH x 1/2" MPT 3/4" FGH x 3/4" MPT 3/4" FGH x 3/4" FGH (Stainless-Steel) 140301 140303 140305 140307 140317 140319 140321 140323 3/8" Barb x 3/4" MGH 1/2" Barb x 3/4" MGH 5/8" Barb x 3/4" MGH 3/4" Barb x 3/4" MGH 3/8" Barb x 3/4" FGH 1/2" Barb x 3/4" FGH 5/8" Barb x 3/4" FGH 3/4" Barb x 3/4" FGH Part No 9.802-200.0 8.710-456.0 8.710-457.0 8.710-458.0 8.710-459.0 8.710-460.0 8.710-461.0 8.710-464.0 6.380-126.0 8.709-116.0 8.904-167.0* 8.904-168.0* 8.904-169.0* *50/pk Old No 358010 358012 358013 358015 358018 358019 358020 358024 ! Nylon “Speedi-Clamp” tightens with a snap ! Releases with a twist ! Stainless-steel band and housing ! Worm gear tensions Hose Clamps WARNING: LOW-PRESSURE USE ONLY! Not for use on pressure washer discharge hose. Band 4mm 5mm 10mm H8 H10 H12 H16 H32 OD 5/16" 5/16" 5/16" 1/2" 1/2" 1/2" 1/2" 1/2" 358001X 358004X 358006X Red Spring Clamp Green Spring Clamp 1/4" ID Speedi-Clamp 3/8" ID Speedi-Clamp 1/2" ID Speedi-Clamp Min-Max .25-.63 .38-.88 .50-1.06 .44-.91 .56-1.06 .69-1.25 .75-1.50 1.56 - 2.50 .466-.54 .40-.48 Zinc-plated Heavy Wall Steel Pipe Fittings ! Up to 6000 PSI working pressure (18,000 PSI burst) ! Attractive zinc-plated protective coating ! U.S.-standard taper pipe threads Adapters – Steel Part No 8.705-356.0 8.705-357.0 9.804-553.0 8.705-359.0 8.705-360.0 8.705-361.0 8.705-362.0 Old No 142404 142405 142406 142407 142408 142409 142412 MPT x FPT Working Pressure 1/4" x 1/4" 1/4" x 3/8" 3/8" x 3/8" 3/8" x 1/2" 1/2" x 1/2" 1/2" x 3/4" 3/4" x 3/4" 6000 6000 6000 5000 5000 4000 4000 Page 71

COUPLERS, FITTINGS & FILTERS Hex Coupling – Steel Part No 8.705-364.0 8.705-366.0 8.705-369.0 8.705-371.0 Old No 142415 142417 142420 142422 Reducing Couplings 8.705-365.0 8.705-367.0 8.705-368.0 8.705-370.0 142416 142418 142419 142421 Street Tee – Steel FPT x FPT 1/4" x 1/4" 3/8" x 3/8" 1/2" x 1/2" 3/4" x 3/4" 3/8" x 1/4" 1/2" x 3/8" 1/2" x 1/4" 3/4" x 1/2" Working Pressure 6000 6000 5000 5000 6000 5000 5000 4000 Part No 8.705-428.0 9.802-033.0 9.802-034.0 8.705-431.0 Old No 142684 142685 142686 142687 FPT x MPT Working Pressure 1/4" 3/8" 1/2" 3/4" 5000 4500 3000 3000 Hex Nipple – Steel Part No 9.802-010.0 9.802-011.0 9.802-012.0 8.705-380.0 9.802-022.0 8.705-375.0 8.705-376.0 8.705-379.0 Old No 142425 142427 142430 142434 142426 142428 142429 142431 Elbow – Steel Part No Old No FPT x FPT 1/4" x 1/4" 3/8" x 3/8" 1/2" x 1/2" 3/4" x 3/4" 3/8" x 1/4" 1/2" x 1/4" 1/2" x 3/8" 3/4" x 1/2" Working Pressure 6000 6000 6000 6000 6000 6000 6000 6000 8.706-176.0 8.705-393.0 8.705-394.0 9.802-023.0 8.705-396.0 8.705-397.0 8.705-398.0 8.705-399.0 Part No 9.802-039.0 9.802-040.0 9.802-130.0 8.706-906.0 Street Elbow – Steel Part No 9.802-029.0 9.804-080.0 9.802-030.0 8.705-384.0 9.803-045.0 8.705-386.0 8.705-387.0 Old No 142438 142439 142440 142441 142442 142443 142444 142504 142505 142506 142507 142508 142509 142512 Old No 2-0053 FPT x FPT 1/4" x 1/8" 1/4" x 1/4" 1/4" x 3/8" 3/8" x 3/8" 3/8" x 1/2" 1/2" x 1/2" 1/2" x 3/4" 3/4" x 3/4" Description 1/2" JIC x 3/8" MPT 1/2" JIC x 1/2" MPT 1/2" JIC x 1/4" MPT 1/2" JIC x 3/4" FPT Working Pressure 4500 5000 4500 4500 3000 3000 4000 4000 Working Pressure 5000 5000 5000 5000 Tee – 3 Connects MPT x FPT Working Pressure 1/4" x 1/4" 1/4" x 3/8" 3/8" x 3/8" 3/8" x 1/2" 1/2" x 1/2" 1/2" x 3/4" 3/4" x 3/4" 5000 4500 4500 3000 3000 3000 3000 Part No 8.705-412.0 8.705-414.0 9.802-032.0 8.705-417.0 Part No 8.706-213.0 Elbows - 45° Part No 8.706-278.0 8.706-277.0 Old No 142654 142656 142658 142662 MPT 1/4" Cross – 4 Connects FPT x FPT 3/8" x 3/8" 1/4" x 1/4" Part No 8.705-418.0 8.705-419.0 8.705-420.0 8.705-421.0 Page 72 Old No 142664 142666 142668 142672 FPT 1/4" 3/8" 1/2" 3/4" Working Pressure 5000 4500 3000 3000 FPT 1/4" 3/8" 1/2" 3/4" Working Pressure 5000 4500 3000 3000

COUPLERS, FITTINGS & FILTERS Reducing Bushing – Steel Part No 9.802-046.0 8.705-423.0 9.802-045.0 8.705-426.0 Old No 142676 142678 142680 142682 1/2" x 1/4" 1/2" x 3/8" 3/4" x 1/2" Pipe Street Elbows MPT x FPT Working Pressure 3/8" x 1/4" 6000 6000 6000 6000 Part No 8.705-407.0 8.705-408.0 8.705-409.0 8.705-410.0 Old No 142604 142606 142608 142610 MPT x FPT 1/4" 3/8" 1/2" 3/4" Hex Pipe Plugs – Steel Part No 9.803-530.0 8.705-433.0 8.705-434.0 8.705-435.0 Old No 142701 142702 142703 142704 3/8" 1/2" 3/4" Pipe Tees Description Working Pressure 1/4" 6000 6000 6000 6000 Part No 8.705-456.0 8.705-458.0 8.705-459.0 8.705-461.0 Pipe Nipple – Zinc Part No 9.803-043.0 8.705-441.0 8.705-442.0 8.705-443.0 8.705-985.0 8.705-445.0 8.705-446.0 Part No 9.802-014.0 9.802-015.0 8.705-996.0 8.705-450.0 8.705-451.0 8.705-452.0 8.705-453.0 Old No 142800 142801 142802 142803 142804 142805 142806 Old No 142807 142808 142808T 142810 142811 142812 142813 Length x MPT Working Pressure 2" x 1/4" 3" x 1/4" 4" x 1/4" 2" x 3/8" 3" x 3/8" 4" x 3/8" 2" x 1/2" 6000 6000 6000 6000 6000 6000 6000 Length x MPT Working Pressure 3" x 1/2" 4" x 1/2" 5" x 1/2" 2" x 3/4" 3" x 3/4" 4" x 3/4" 6" x 3/4" Galvanized Pipe Fittings ! Pressed-steel fittings — external galvanized for excellent chemical re sis tance ! Ideal for supply line (city water pressure) applications (working pressure rating 125 PSI) ! NOT recommended for high-pressure piping applications. 6000 6000 6000 6000 6000 6000 6000 Part No 8.705-436.0 8.705-437.0 8.705-438.0 8.705-439.0 Old No 142754 142756 142758 142760 FPT x FPT 1/4" 3/8" 1/2" 3/4" Old No 142854 142856 142858 142868 FPT x FPT x FPT 1/4" 3/8" 1/2" 3/4" Merchant Coupling Part No 8.705-389.0 8.705-390.0 8.705-391.0 Old No 142454 142456 142458 FPT x FPT 1/4" 3/8" 1/2" Banded Coupling Elbows - 90° Part No 8.705-403.0 8.705-404.0 8.705-405.0 8.705-406.0 Old No 142552 142556 142558 142560 FPT x FPT 1/4" 3/8" 1/2" 3/4" Page 73

COUPLERS, FITTINGS & FILTERS Filter - “The Big One” Larger, heavier, and with more filtering area than competitors’ filters. ! Corrosion-resistant plastic ! Stepped 1/4" and 3/8" hose barb !Weighted to hold on to bottom of tank Part No 8.709-938.0 8.709-939.0 Old No 340025 340026 Description With Check Valve Without Check Valve Part No Chemical Filter - Brass 50-mesh, stainless-steel screen. Removable mesh for easy cleaning. Heavy-duty, one-piece brass body holds the filter on the bottom of tank. ! 1/4" hose barb ! Stainless-steel check ball Part No 9.803-672.0 8.709-934.0 Old No 340010X 340012X Description With Check Valve Without Check Valve Chemical Strainer - Plastic Polypropylene and brass construction. ! 7mm hose barb Part No 8.709-935.0 9.802-160.0 Old No 340014 340015 Description w/ Check Valve w/o Check Valve Chemical Line w/ Filter ! 6-foot long, 1/4" clear vinyl tubing Part No 8.903-991.0 8.903-993.0 8.903-996.0 Old No 340022X 340024X 340027X Description Chemical Line/ Filter w/ Check Valve (Brass Filter) Chemical Line/ Filter w/ Check Valve (Plastic Filter) Chemical Line/ Filter w/o Check Valve (Plastic Filter) Filters - Heavy-Duty In-Line ! 1/2" female x male ! 50-mesh screen ! 8 GPM max flow ! 145 PSI max pressure ! 140°F max temperature ! Unbreakable reinforced nylon cap Part No 8.709-974.0 8.709-975.0 8.704-172.0 Old No 342026 342027 109941 Description Filter With Auxiliary (bypass) Port Replacement Filter Page 74 Filters - Clear Bowl ! Low-profile style ! MPT inlet and outlet !White nylon body ! Clear bowl ! Stainless-steel screen ! L: 3", W: 1-3/4", H: 2-3/8" Part No 8.709-962.0 8.709-963.0 8.709-964.0 8.709-965.0 8.709-966.0 8.709-967.0 8.700-563.0 8.700-564.0 Old No 342012 342013 342014 342015 342016 342017 078214 078215 Description 1/4", 40-Mesh Screen 1/4", 80-Mesh Screen 3/8", 40-Mesh Screen 3/8", 80-Mesh Screen 1/2", 40-Mesh Screen 1/2", 80-Mesh Screen 80-Mesh Replacement Scrn 40-Mesh Replacement Scrn 8.709-961.0 8.701-383.0 8.701-382.0 8.702-034.0 Old No 342010 083441 083439 083440 Description Green Cap Filter Replacement Screen Replacement Cap Replacement O-Ring In-Line Filter - Green-Cap The Original Green-Cap! ! 6 GPM max flow ! 40-mesh stainless screen ! Diecast metal housing/ plastic cap ! 1/2" FPT inlet ! 1/2" MPT outlet ! Two 1/4" side ports ! 145 PSI max pressure In-Line Filter - All Metal ! Die-cast aluminum body and cover ! Black anodized finish ! 38-mesh screen ! 170 PSI max pressure ! 195°F max temperature ! 6.6 GPM max flow ! 1/2" female x male Part No 8.709-976.0 8.704-055.0 Old No 342030 109343 Description All Metal Line Filter Replacement Filter

COUPLERS, FITTINGS & FILTERS In-Line Can-Type Filters and Parts ! 40- or 80-mesh filtration ! Heavy-duty molded plastic with stainless-steel screen ! Hanger tab standard on 3/8", 1/2" and 3/4" ! Choose black or clear filter cans Part No 40-Mesh Filters 8.709-982.0 8.709-986.0 8.709-990.0 8.709-994.0 8.710-001.0 8.710-003.0 8.709-983.0 8.709-987.0 8.709-991.0 8.709-996.0 8.710-002.0 8.710-004.0 80-Mesh Filters 8.709-988.0 8.709-992.0 8.709-995.0 8.710-005.0 8.709-999.0 8.709-989.0 8.709-993.0 8.709-997.0 8.710-006.0 8.710-000.0 Old No 342105 342110 342115 342120 342150 342155 342106 342111 342116 342123 342151 342156 Description Black, 3/8" Black, 1/2" Black, 3/4" Black, 1" Black, 1-1/4" Black, 1-1/2" Clear, 3/8" Clear, 1/2" Clear, 3/4" Clear, 1" Clear, 1-1/4" Clear, 1-1/2" 8.710-145.0 8.710-146.0 ! Stainless-steel screen ! Combination 1/2" / 3/4" hose barb Part No 8.710-145.0 8.710-147.0 8.710-144.0 8.710-146.0 Old No 347091 347093 347090 347092 8.710-147.0 !Weighted to hold at bottom of tank or source Description 3/8" NPT x 3/4" GH 3/8" NPT x 3/4" GH w/ 1/4" Bypass 1/2" NPT x 3/4" GH 1/2" NPT x 3/4" GH w/ 1/4" Bypass In-Line ClearView Filter Y-Trap Strainer ! Brass bodies and cap ! FPT inlet and outlet ! Stainless-steel 50-mesh cylinder screen ! 170 PSI max pressure ! 194°F max temperature Part No 342112 342117 342122 342158 342147 342113 342118 342125 342159 342149 Black, 1/2" Black, 3/4" Black, 1" Black, 1-1/4" Black, 1-1/2" Clear, 1/2" Clear, 3/4" Clear, 1" Clear, 1-1/4" Clear, 1-1/2" In-Line Can-Type Filter Parts – 3/8", 1/2", 3/4" 8.700-555.0 8.700-557.0 8.700-559.0 8.700-560.0 8.700-565.0 8.700-567.0 8.932-949.0 8.700-569.0 8.700-570.0 078202 078204 078207 078208 078216 078220 078223 078224 078225 Gasket Viton Gasket Bowl – Standard Black Bowl – Clear 40-Mesh Screen 80-Mesh Screen 3/8" Top with Tab 1/2" Top with Tab 3/4" Top with Tab In-Line Can-Type Filter Parts – 1", 1-1/4", 1-1/2" 8.700-556.0 8.700-558.0 8.700-566.0 8.700-575.0 8.700-576.0 8.700-568.0 8.700-577.0 8.700-578.0 8.700-571.0 8.700-572.0 8.700-573.0 8.700-574.0 078203 078205 078217 078233 078234 078221 078237 078238 078226 078227 078230 078231 Gasket Viton Gasket 40-Mesh Screen 1" 40-Mesh Screen 1-1/4" 40-Mesh Screen 1-1/2" 80-Mesh Screen 1" 80-Mesh Screen 1-1/4" 80-Mesh Screen 1-1/2" 1" Filter Top 1-1/4" Filter Top Bowl Black – 1", 1-1/4", 1-1/2" Bowl Clear – 1", 1-1/4", 1-1/2" Part No 8.709-970.0 8.709-969.0 Old No 342021 342020 Description With Check Valve Without Check Valve Suction Foot Valve - ST35/35R ! Stainless-steel screen ! Combination 1/2" / 3/4" hose barb !Weighted to hold at bottom of tank or source 8.709-956.0 8.709-957.0 8.709-958.0 8.709-959.0 8.709-960.0 Old No 342004 342006 342007 342008 342009 FPT 1/4" 3/8" 1/2" 3/4" 1" Check/Foot Valve Includes backflow check and perforated screen, prevents damage to pump or control valves. ! Removable stainless-steel screen ! Spring-loaded check valve ! Cast-brass bodies ! FPT outlet Part No 8.709-388.0 8.709-389.0 8.709-390.0 8.709-391.0 8.709-392.0 Old No 310882 310883 310884 310886 310888 Description 1/2" Foot Valve/ Check and Screen 3/4" Brass Spring Check Valve 1" Brass Spring Check Valve 1-1/2" Brass Spring Check Valve 2" Brass Spring Check Valve Page 75

COUPLERS, FITTINGS & FILTERS Tank Screen/Strainer ! Stainless-steel screen — 40- or 50-mesh ! PVC base — attaches to nipple or tubing ! Use for tank drain or chemical line Filter and Parts - High-Volume Molded plastic housing. Part No 8.710-008.0 8.710-010.0 8.710-011.0 9.802-162.0 8.710-013.0 8.710-014.0 8.710-015.0 8.710-016.0 Old No 342304 342306 342307 342308 342311 342312 342316 342320 Mesh 50 50 40 50 40 50 40 40 FPT 1/4" 3/8" 1/2" 1/2" 3/4" 3/4" 1" 1-1/2" In-Line High-Pressure Nozzle Filters Protect your turbo nozzle from damage caused by debris in the water flow. ! Pleated polyester/polypropylene core ! Recommended for large flow, low-pressure applications (up to 60 PSI) ! 3/4" FPT inlet and outlet ! 125 PSI max pressure ! 12 GPM max flow at 50 micron ! 10 GPM max flow at 5 or 20 micron ! Clear-view sump ! 14-1/2" tall x 5-1/2" port to port Part No 8.710-017.0 8.905-569.0 8.700-581.0 Old No 342375 565375X 078280 Description Housing Only Mounting Bracket/Hardware Replacement O-Ring Part No Old No Ultra Fine Filter Elements 8.710-019.0 8.710-020.0 8.710-021.0 342380 342382 342384 8.709-978.0 8.710-149.0 ! Recommended for maximum filtration with reduced flow requirements (up to 130 PSI) Description 5 Micron, 10 GPM 20 Micron, 10 GPM 50 Micron, 12 GPM 8.709-979.0 8.710-150.0 ! 1/4" MPT outlet ! 300°F max ! 100-mesh screen ! 5000 PSI max Part No 8.709-978.0 8.709-979.0 8.710-149.0 8.710-150.0 8.704-234.0 8.701-201.0 Old No 342040 342042 347097 347098 110595 080115 Material Brass Brass 416 SS Brass Inlet 1/4" FPT 1/4" QC 1/4" QC 1/4" MPT Outlet 1/4" MPT 1/4" MPT 1/4" MPT 1/4" MPT Replacement filter for 342040/342042 Replacement filter for 347097/347098 Fuel Filters In-line, disposable. Part No 8.710-023.0 8.710-024.0 Old No Synthetic String Wound Elements 8.710-022.0 342387 342389 342391 Description 5 Micron, 4 GPM 20 Micron, 5 GPM 50 Micron, 6 GPM 8.709-942.0 9.802-211.0 Part No 9.802-211.0 8.709-942.0 8.709-943.0 Old No 341001 341002 341003 Description 1/4" In/Out, Plas tic 1/4" In/Out, Metal 3/8" In/Out, Plastic Page 76

COUPLERS, FITTINGS & FILTERS Clear Bowl Fuel Filter ! Aluminum housing ! Non-replaceable 120-mesh stainless-steel screen ! 1/4" x 1/4" ! Clear acrylic bowl Fuel Filter / Water Separator The “Max” fuel system protector. ! 10 micron filtration ! Spin-on convenience !Water-separation chamber ! 1/4" FPT inlet/outlet ! Easy-drain water/sediment bowl Part No 8.709-948.0 Old No 341013 Description Complete Unit Part No Fuel Filter / Water Separator ! 10 micron filtration ! Spin-on convenience !Water-separation chamber ! 1/4" FPT inlet / outlet ! Easy drain water / sediment bowl 9.802-212.0 8.709-953.0 8.700-553.0 Old No 341040 341042 078127 Description Complete Unit Element Plastic Bowl General Fuel Filter Element ! Can type ! 10 GPH max flow ! 10 micron filtration ! Inexpensive replacement ! Wool felt element Part No 8.725-306.0 8.725-307.0* Description Complete Unit Element Only *Order 24 for a full case Part No 8.709-950.0 Old No 341017 Description Element Blue Top Filter Racor Filter Funnel ! 3.9 GPM ! Telfon-coated, stainless-steel filter ! Separates free water and contaminates from gasoline/diesel/kerosene Part No Part No 8.753-559.0 8.753-561.0 8.753-562.0 8.753-563.0 8.753-564.0 8.753-565.0 8.753-566.0 8.753-567.0 Description Housing, 5" 1/2" F-F Housing, 5”, 1" F-F Housing, 10", 1/2" F-F Housing, 10", 3/4" F-F Cartridge, 10" Poly Thread (Disposable) Cartridge, 5" Poly Thread (Disposable) Cartridge, 10" Nylon Mesh (Washable) Cartridge, 5" Nylon Mesh (Washable) 8.709-955.0 Old No 341044 Description Racor Filter Funnel Page 77

NOZZLES Nozzle Size Selection Chart Determine the nozzle size by the pressure washer’s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be damaged. If the nozzle size is too large, cleaning ability is compromised. Nozzle fan degree does not effect nozzle size selection. Standard Nozzle Size 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 11 12 12.5 13 15 20 25 30 40 50 60 Hole Size .034”/0.86mm .042”/1.07mm .043”/1.09mm .048”/1.22mm .052”/1.32mm .055”/1.40mm .057”/1.45mm .06”/1.52mm .062”/1.57mm .064”/1.63mm .067”/1.70mm .070”/1.78mm .072”/1.83mm .074”/1.88mm .076”/1.93mm ..078”/1.98mm .080”/2.03mm .083”/2.11mm .087”/2.21mm ..089”/2.26mm .091”/2.31mm ..096”/2.44mm .109”/2.77mm .125”/3.18mm .141”/3.58mm .156”/3.96mm .172”/4.37mm .188”/4.78mm Pounds Per Square Inch (PSI) 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 4500 5000 0.71 0.87 1.00 1.12 1.22 1.32 1.41 1.50 1.58 1.66 1.73 1.80 1.87 1.94 2.00 2.12 2.24 0.88 1.08 1.25 1.40 1.53 1.65 1.77 1.88 1.98 2.07 2.17 2.25 2.34 2.42 2.50 2.65 2.80 1.06 1.30 1.50 1.68 1.84 1.98 2.12 2.25 2.37 2.49 2.60 2.70 2.81 2.90 3.00 3.18 3.35 1.24 1.52 1.75 1.96 2.14 2.32 2.47 2.63 2.77 2.90 3.03 3.15 3.27 3.39 3.50 3.71 3.91 1.41 1.73 2.00 2.24 2.45 2.65 2.83 3.00 3.16 3.32 3.46 3.61 3.74 3.87 4.00 4.24 4.47 1.59 1.95 2.25 2.52 2.76 2.98 3.18 3.38 3.56 3.73 3.90 4.06 4.21 4.36 4.50 4.77 5.03 1.77 2.17 2.50 2.80 3.06 3.31 3.54 3.75 3.95 4.15 4.33 4.51 4.68 4.84 5.00 5.30 5.59 1.94 2.38 2.75 3.07 3.37 3.64 3.89 4.13 4.35 4.56 4.76 4.96 5.14 5.33 5.50 5.83 6.15 2.12 2.60 3.00 3.35 3.67 3.97 4.24 4.50 4.74 4.97 5.20 5.41 5.61 5.81 6.00 6.36 6.71 2.30 2.81 3.25 3.63 3.98 4.30 4.60 4.88 5.14 5.39 5.63 5.86 6.08 6.29 6.50 6.89 7.27 2.47 3.03 3.50 3.91 4.29 4.63 4.95 5.25 5.53 5.80 6.06 6.31 6.55 6.78 7.00 7.42 7.83 2.65 3.25 3.75 4.19 4.59 4.96 5.30 5.63 5.93 6.22 6.50 6.76 7.02 7.26 7.50 7.95 8.39 2.83 3.46 4.00 4.47 4.90 5.29 5.66 6.00 6.32 6.63 6.93 7.21 7.48 7.75 8.00 8.49 8.94 3.01 3.68 4.25 4.75 5.21 5.62 6.01 6.38 6.72 7.05 7.36 7.66 7.95 8.23 8.50 9.02 9.50 3.18 3.90 4.50 5.03 5.51 5.95 6.36 6.75 7.12 7.46 7.79 8.11 8.42 8.71 9.00 9.55 10.06 3.36 4.11 4.75 5.31 5.82 6.28 6.72 7.13 7.51 7.88 8.23 8.56 8.89 9.20 9.50 10.08 10.62 3.54 4.33 5.00 5.59 6.12 6.61 7.07 7.50 7.91 8.29 8.66 9.01 9.35 9.68 10.00 10.61 11.18 3.89 4.76 5.50 6.15 6.74 7.28 7.78 8.25 8.70 9.12 9.53 9.92 10.29 10.65 11.00 11.67 12.30 4.24 5.20 6.00 6.71 7.35 7.94 8.49 9.00 9.49 9.95 10.39 10.82 11.22 11.62 12.00 12.73 13.42 4.42 5.41 6.25 6.99 7.65 8.27 8.84 9.38 9.88 10.36 10.83 11.27 11.69 12.10 12.50 13.26 13.98 4.60 5.63 6.50 7.27 7.96 8.60 9.19 9.75 10.28 10.78 11.26 11.72 12.16 12.59 13.00 13.79 14.53 5.30 6.50 7.50 8.39 9.19 9.92 10.61 11.25 11.86 12.44 12.99 13.52 14.03 14.52 15.00 15.91 16.77 7.07 8.66 10.00 11.18 12.25 13.23 14.14 15.00 15.81 16.58 17.32 18.03 18.71 19.36 20.00 21.21 22.36 8.84 10.83 12.50 13.98 15.31 16.54 17.68 18.75 19.76 20.73 21.65 22.53 23.39 24.21 25.00 26.52 27.95 10.61 12.99 15.00 16.77 18.37 19.84 21.21 22.50 23.72 24.87 25.98 27.04 28.06 29.05 30.00 31.82 33.54 14.14 17.32 20.00 22.36 24.49 26.48 28.28 30.00 31.62 33.17 34.64 36.06 37.42 38.73 40.00 42.43 44.72 17.68 21.65 25.00 27.95 30.62 33.07 35.36 37.50 39.53 41.46 43.30 45.07 46.77 48.41 50.00 53.03 55.90 21.21 25.98 30.00 33.54 36.74 29.69 42.43 45.00 47.43 49.75 51.96 54.08 56.12 58.09 60.00 63.64 67.08 Nozzle Fan Selection Select the nozzle degree or spray angle, based on your application. Standard nozzle degrees — 0°, 15°, 25°, and 40°. Using the wrong nozzle degree can damage the surface you are cleaning. 0° – Red: 15° – Yellow: 25° – Green: 40° – White: ! Cutting nozzle. It delivers a concentrated stream that can gouge or cut. It can cut stub born stains from concrete and other hard surfaces. ! Chiseling nozzle Working at a 45° angle, this nozzle works like a scraper, stripping paint, grease and grime from hard surfaces. ! Flushing nozzle. The most commonly used nozzle for cleaning dirt from siding, sidewalks and metal furniture as well as for wet sweeping leaves. !Wash nozzle. Its wide spray allows you to wash and rinse a large area fast. It is usually safe with most surfaces, including aluminum siding, windows and vehicles. Page 78 Gallons Per Minute - GPM

NOZZLES Nozzle Kits - Legacy 4/pk and 5/pk Color-Coded QC 1/4" Quick Coupler Nozzle Kits ! Hardened stainless-steel one-piece body for long life ! High-impact, uniform, flat-spray pattern 4/pk (0°, 25°, 40°, and Soap) Part No 8.726-117.0 9.104-028.0 8.726-119.0 8.726-120.0 8.726-121.0 8.726-122.0 8.726-123.0 8.726-124.0 8.726-125.0 3.25 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Nozzle Size 3.0 ! Color-coded by spray angle ! Includes 40 x 65 soap nozzle 5/pk (0°, 15°, 25°, 40°, and Soap) Part No 9.104-024.0 9.104-016.0 8.726-128.0 9.104-030.0 8.726-130.0 8.726-131.0 8.726-132.0 8.726-133.0 8.726-134.0 Nozzle Size 3.0 3.25 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Nozzles - Legacy Individual 1/4" QC “QC”, Color-coded, hardened stainless nozzle, fits most 1/4" quick couplers. Rated for 4000 PSI. QC Nozzles Orifice 3.0 3.25 3.5 3.75 4.0 4.5 5.0 5.5 6.0 6.5 Part No. 0° Red 8.723-576.0 8.708-538.0 8.723-577.0 8.708-527.0 8.708-531.0 8.723-578.0 8.726-105.0 8.723-579.0 8.726-109.0 8.726-113.0 Part No. 15° Yellow 8.902-482.0 8.708-539.0 8.726-104.0 8.708-528.0 8.708-532.0 8.708-535.0 8.726-106.0 8.902-492.0 8.726-110.0 8.726-114.0 Part No. 25° Green 8.902-484.0 8.708-540.0 8.708-526.0 8.708-529.0 8.708-533.0 8.708-536.0 8.726-107.0 8.708-542.0 8.726-111.0 8.726-115.0 Part No. 40° (White) White 8.902-485.0 8.708-541.0 8.902-487.0 8.708-530.0 8.708-534.0 8.708-537.0 8.726-108.0 8.902-493.0 8.726-112.0 8.726-116.0 QC Soap Nozzle Part No 8.723-636.0 Orifice 40 Degree 65° Page 79

NOZZLES Nozzle Sets - 4/pk and 5/pk Color-Coded QC Nozzle sets contain a complete set of four quick coupler nozzles at 0°, 15°, 25°, and 40°. The 5/pk includes one 40 x 65° soap nozzle. 4/pk 5/pk Part No 8.708-712.0 8.708-713.0 8.708-714.0 8.708-715.0 8.708-716.0 8.708-717.0 8.708-718.0 Old No 259700 259701 259702 259703 259704 259705 259706 Nozzle Size 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Part No 9.104-014.0 8.708-721.0 9.104-015.0 8.708-723.0 8.708-724.0 8.708-725.0 8.708-726.0 Old No 259710 259711 259712 259713 259714 259715 259716 Nozzle Size 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Nozzles - General Pump These quick-coupled, color-coded, hardened stainless nozzles fit most 1/4" quick couplers. Rated for 4000 PSI. Orifice Q-Style Nozzle 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 M-Style 1/4" Male Threads ! 1/4" male pipe thread nozzles, rated up to 5000 PSI. Hardened stainlesssteel nozzle insert ensures consistent, accurate orifice size. ! GP M-Style 2.5 x 4.0 Orifice 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 0° Part No - 8.708-647.0 9.802-287.0 9.802-291.0 9.802-295.0 9.803-810.0 9.802-299.0 9.802-303.0 9.802-307.0 8.708-681.0 9.803-800.0 8.708-689.0 8.708-693.0 8.708-697.0 8.708-701.0 8.708-705.0 0° Part No - 8.708-572.0 8.708-576.0 8.708-580.0 8.708-584.0 8.708-588.0 8.708-592.0 8.708-596.0 8.708-600.0 8.708-604.0 8.708-608.0 8.708-612.0 8.708-616.0 8.708-620.0 8.708-624.0 Old No - - 259610 259615 259620 259625 259630 259635 259640 259645 259650 259655 259660 259665 259670 259675 Old No - 259100 259104 259108 259112 259116 259120 259125 259130 259135 259140 259145 259150 259155 259160 15° Part No Old No 8.712-322.0 8.708-648.0 - - 9.802-288.0 259611 9.802-292.0 259616 9.802-296.0 259621 9.803-811.0 259626 9.802-300.0 259631 9.802-304.0 259636 9.802-308.0 259641 8.708-682.0 259646 9.803-801.0 259651 8.708-690.0 259656 8.708-694.0 259661 8.708-698.0 259666 8.708-702.0 259671 8.708-706.0 259676 15° Part No Old No 8.708-569.0 - - - 25° Part No Old No 8.708-645.0 8.708-649.0 9.802-289.0 259612 9.802-293.0 259617 9.802-297.0 259622 9.803-812.0 259627 9.802-301.0 259632 9.802-305.0 259637 9.802-309.0 259642 8.708-683.0 259647 9.803-802.0 259652 8.708-691.0 259657 8.708-695.0 259662 8.708-699.0 259667 8.708-703.0 259672 8.708-707.0 259677 25° Part No Old No 8.708-650.0 - 8.708-574.0 259101 8.708-573.0 259102 8.708-578.0 259105 8.708-577.0 259106 8.708-582.0 259109 8.708-581.0 259110 8.708-586.0 259113 8.708-585.0 259114 8.708-590.0 259117 8.708-589.0 259118 8.708-594.0 259121 8.708-593.0 259122 8.708-598.0 259126 8.708-597.0 259127 8.708-602.0 259131 8.708-601.0 259132 8.708-606.0 259136 8.708-605.0 259137 8.708-610.0 259141 8.708-609.0 259142 8.708-614.0 259146 8.708-613.0 259147 8.708-618.0 259151 8.708-617.0 259152 8.708-622.0 259156 8.708-621.0 259157 8.708-626.0 259161 8.708-625.0 259162 40° Part No Old No 8.708-652.0 8.708-651.0 - - 8.932-998.0 259613 9.802-294.0 259618 9.802-298.0 259623 9.803-813.0 259628 9.802-302.0 259633 9.802-306.0 259638 9.802-310.0 259643 8.708-684.0 259648 9.803-803.0 259653 8.708-692.0 259658 8.708-696.0 259663 8.708-700.0 259668 8.708-704.0 259673 8.708-708.0 259678 40° Part No Old No 8.708-570.0 - 8.708-575.0 259103 8.708-579.0 259107 8.708-583.0 259111 8.708-587.0 259115 8.708-591.0 259119 8.708-595.0 259123 8.708-599.0 259128 8.708-603.0 259133 8.708-607.0 259138 8.708-611.0 259143 8.708-615.0 259148 8.708-619.0 259153 8.708-623.0 259158 8.708-627.0 259163 ! Q-Style Chemical Nozzles, are brass with a large #40 orifice and 65° spray angle. Ideal for low-pressure chemical applications. Q-Style Chemical Nozzle Old No 259690 259695 Part No 9.802-311.0 8.708-711.0 Orifice 40 50 Page 80 Degree 65° 15° Nozzle Holder Grommet Old No 349917 Part No 8.710-343.0 Description Grommets –7/16" x 15/16" x 3/8"

NOZZLES Nozzles - Spraying Systems 1/4" male pipe thread meg nozzles, rated up to 4000 PSI. Hardened stainless-steel nozzle ensures consistent, accurate orifice size. 1/4" Male Threads ! Orifice recessed for protection ! 4000 PSI rated working pressure ! ± 2% flow tolerance @ 70°F ! Hard-edge pattern, light center requires overlap to cover center Orifice 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 12.5 13.0 15.0 20.0 25.0 30.0 40.0 50.0 60.0 0° Part No 8.707-637.0 8.707-646.0 8.707-655.0 8.707-662.0 8.707-669.0 8.707-678.0 8.707-683.0 8.707-694.0 8.707-700.0 8.707-708.0 8.707-713.0 8.707-718.0 8.707-723.0 8.707-734.0 8.707-739.0 8.707-747.0 8.707-760.0 8.707-764.0 8.707-769.0 8.707-773.0 8.707-782.0 8.707-795.0 8.707-807.0 8.707-814.0 8.707-821.0 8.707-828.0 8.707-834.0 Old No 251100 251113 251120 251140 251160 251175 251195 251215 251235 251255 251275 251300 251320 251340 251360 251380 251400 251420 251440 251460 251480 251500 251520 251540 251560 251580 251600 15° Part No Old No 8.707-640.0 251105 8.707-650.0 251116 8.707-657.0 251125 8.707-664.0 251145 8.707-671.0 251161 8.707-679.0 251180 8.707-686.0 251200 8.707-695.0 251220 8.707-702.0 251240 8.707-710.0 251260 8.707-715.0 251280 8.707-719.0 251305 8.707-726.0 251325 8.707-735.0 251345 8.707-741.0 251365 8.707-751.0 251385 8.707-761.0 251405 8.707-766.0 251425 8.707-770.0 251445 8.707-774.0 251465 8.707-787.0 251485 8.707-800.0 251505 8.707-811.0 251525 8.707-817.0 251545 8.707-824.0 251565 8.707-830.0 251585 8.707-835.0 251605 25° Part No Old No 8.707-643.0 251110 8.707-653.0 251119 8.707-659.0 251130 8.707-666.0 251150 8.707-673.0 251165 8.707-680.0 251185 8.707-688.0 251205 8.707-697.0 251225 8.707-703.0 251245 8.707-711.0 251265 8.707-716.0 251285 8.707-721.0 251310 8.707-727.0 251330 8.707-736.0 251350 8.707-743.0 251370 8.707-754.0 251390 8.707-762.0 251410 8.707-767.0 251430 8.707-771.0 251450 8.707-776.0 251470 8.707-789.0 251490 8.707-802.0 251510 8.707-812.0 251530 8.707-818.0 251550 8.707-826.0 251570 8.707-832.0 251590 8.707-837.0 251610 1/8" male pipe thread meg nozzles, rated up to 4000 PSI. Hardened stainless-steel nozzle ensures consistent, accurate orifice size. Orifice 1/8" Male Threads ! Orifice recessed for protection ! 4000 PSI rated working pressure ! ± 2% flow tolerance @ 70°F ! Hard-edge pattern, light center requires overlap to cover center 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 11.0 12.0 15.0 20.0 0° Part No 8.707-529.0 – 8.707-540.0 – 8.707-547.0 8.707-552.0 8.707-558.0 8.707-567.0 8.707-571.0 8.707-577.0 8.707-582.0 8.707-588.0 8.707-593.0 8.707-598.0 8.707-602.0 – 8.707-612.0 8.707-618.0 8.707-621.0 8.707-625.0 8.707-628.0 Old No 250100 – 250120 – 250140 250160 250180 250200 250220 250240 250260 250280 250300 250320 250340 – 250380 250400 250420 250440 250500 15° Part No Old No 8.707-536.0 250105 - 8.707-542.0 250125 8.707-545.0 250137 8.707-549.0 250145 8.707-554.0 250165 8.707-559.0 250185 8.707-568.0 250205 8.707-572.0 250225 8.707-578.0 250245 8.707-584.0 250265 8.707-589.0 250285 8.707-594.0 250305 8.707-599.0 250325 8.707-604.0 250345 8.707-609.0 250365 8.707-613.0 250385 8.707-619.0 250405 – 8.707-626.0 250445 – – 40° Part No Old No 8.707-648.0 251115 – – 8.707-661.0 251135 8.707-667.0 251155 8.707-675.0 251170 8.707-681.0 251190 8.707-691.0 251210 8.707-698.0 251230 8.707-705.0 251250 8.707-712.0 251270 8.707-717.0 251290 8.707-722.0 251315 8.707-729.0 251335 8.707-738.0 251355 8.707-746.0 251375 8.707-756.0 251395 8.707-763.0 251415 8.707-768.0 251435 8.707-772.0 251455 8.707-778.0 251475 8.707-790.0 251495 8.707-804.0 251515 8.707-813.0 251535 8.707-819.0 251555 8.707-827.0 251575 8.707-833.0 251595 8.707-838.0 251615 25° Part No Old No 8.707-537.0 250110 8.711-465.0 8.707-543.0 250130 8.707-546.0 250138 8.707-550.0 250150 8.707-556.0 250170 8.707-561.0 250190 8.707-569.0 250210 8.707-573.0 250230 8.707-579.0 250250 8.707-585.0 250270 8.707-591.0 250290 8.707-595.0 250310 8.707-600.0 250330 8.707-605.0 250350 8.707-610.0 250370 8.707-614.0 250390 8.707-620.0 250410 – 8.707-627.0 250450 – – 40° Part No Old No 8.707-538.0 250115 – - 8.707-544.0 250135 – – 8.707-551.0 250155 8.707-557.0 250175 8.707-564.0 250195 8.707-570.0 250215 8.707-575.0 250235 8.707-581.0 250255 8.707-586.0 250275 8.707-592.0† 250295 8.707-596.0 250315 8.707-601.0 250335 8.707-607.0 250355 8.707-611.0 250375 8.707-616.0 250395 – – 8.707-623.0 250435 – – – – Page 81

NOZZLES Nozzles - Spraying Systems “QC” or Quick Connect Hardened Stainless Meg Nozzle, fits most 1/4" quick couplers. Rated for 4000 PSI. ! 4000 PSI ! Flow-rated tolerance of ±2% ! Hardened stainless-steel Orifice 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 9.0 10.0 12.0 0° P/N Red 8.708-417.0 8.708-422.0 8.708-427.0 8.708-431.0 8.708-435.0 8.708-439.0 8.708-443.0 8.708-447.0 8.708-451.0 8.708-455.0 8.708-459.0 – 8.708-467.0 8.708-471.0 Old P/N 255120 15° P/N Yellow ! 300°F ! Fits Hansen and Parker quick-couplers Old P/N 8.708-418.0 4-12803015S 4-12803500S 8.708-423.0 4-12803515S 255160 255175 255195 255215 255235 255255 255275 255300 255320 – 255380 255420 8.708-428.0 255161 8.708-432.0 255180 8.708-436.0 255200 8.708-440.0 255220 8.708-444.0 255240 8.708-448.0 255260 8.708-452.0 255280 8.708-456.0 255305 8.708-460.0 255325 8.708-463.0 255365 8.708-468.0 255385 8.708-472.0 255425 25° P/N Green Old P/N 8.708-419.0 255140 8.708-424.0 4-12803525S 8.708-429.0 255165 8.708-433.0 255185 8.708-437.0 255205 8.708-441.0 255225 8.708-445.0 255245 8.708-449.0 255265 8.708-453.0 255285 8.708-457.0 255310 8.708-461.0 255330 8.708-464.0 255370 8.708-469.0 255390 – – QC “Wash Jet” Nozzle with Colorcoded Nozzle Protector 40° P/N White Old P/N 8.708-420.0 4-12803040S 8.708-425.0 4-12803540S 8.708-430.0 255170 8.708-434.0 255190 8.708-438.0 255210 8.708-442.0 255230 8.708-446.0 255250 8.708-450.0 255270 8.708-454.0 255290 8.708-458.0 255315 8.708-462.0 255335 8.708-465.0 255375 8.708-470.0 255395 8.708-474.0 255435 Nozzles for Low-Pressure Applications, Brass 1/4" male pipe thread Vee Jet nozzles, brass inexpensive alter-tive for applications up to 500 PSI. ! Feather edge for wide coverage ! Allows overlap for even application Nozzle Size 15 20 30 40 50 60 70 0° P/N 8.708-203.0 8.708-218.0 8.708-242.0 8.708-258.0 8.708-275.0 8.708-289.0 8.708-302.0 Old P/N 254260B 254270B 254290B 254300B 254310B 254320B 254330B 15° P/N ! Excellent for low-pressure chemical and acid applications ! 1/4" MPT connects Old P/N 25° P/N Old P/N 8.708-204.0 254261B 8.708-206.0 254262B 8.708-222.0 254271B 8.708-225.0 254272B 8.708-244.0 254291B 8.708-246.0 254292B 8.708-260.0 254301B 8.708-262.0 254302B 8.708-277.0 254311B 8.708-279.0 254312B 8.708-290.0 254321B 8.708-292.0 254322B 40° P/N Old P/N 8.708-208.0 254264B 8.708-228.0 254274B 8.708-249.0 254294B 8.708-264.0 254304B 8.708-280.0 254314B 8.708-294.0 254324B 50° P/N Old P/N 8.708-210.0 254265B 8.708-230.0 254275B 8.708-251.0 254295B 8.708-266.0 254305B 8.708-282.0 254315B 8.708-296.0 254325B 1/4" Male Threads 65° P/N Old P/N 8.708-212.0 254266B 8.708-232.0 254276B 8.708-253.0 254296B 8.708-268.0 254306B 8.708-284.0 254316B 8.708-297.0 254326B 8.708-304.0 254331B 8.708-306.0 254332B 8.708-308.0 254334B 8.708-309.0 254335B 8.708-310.0 254336B Nozzles - Broad Spray Stainless-Steel 1/4" male pipe thread 303 stainless-steel Vee Jet nozzles, low- to medium-volume up to 500 PSI medium-pres sure/special application PSI. Nozzle Size 1.0 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Orifice Dia .026 .031 .036 .043 .047 .053 .058 .063 .067 50° P/N 8.708-074.0 8.708-085.0 8.708-095.0 8.708-108.0 8.708-121.0 8.708-133.0 8.708-148.0 – 8.708-172.0 Old P/N 254105 254115 254125 254135 254145 254155 254175 254195 254215 65° P/N Old P/N 8.708-075.0 254106 8.708-086.0 254116 8.708-096.0 254126 8.708-109.0 254136 8.708-122.0 254146 8.708-134.0 254156 8.708-149.0 254176 8.708-163.0 254196 8.708-173.0 254216 80° P/N Old P/N 8.708-076.0 254107 8.708-087.0 254117 8.708-097.0 254127 8.708-110.0 254137 8.708-123.0 254147 8.708-136.0 254157 8.708-151.0 254177 254197 1/4" Male Threads 95° P/N Old 8.708-078.0 254108 8.708-089.0 254118 8.708-099.0 254128 8.708-112.0 254138 8.708-125.0 254148 8.708-138.0 254158 8.708-155.0 254178 – 8.708-175.0 254217 – – 8.708-177.0 254218 110° P/N Old P/N 8.708-079.0 254109 8.708-090.0 254119 8.708-101.0 254129 8.708-114.0 254139 8.708-127.0 254149 8.708-140.0 254159 8.708-157.0 254179 – 8.708-179.0 254219 Page 82

NOZZLES Tip-Jet Nozzle System – Tips and Components “Tip-Jet” Nozzle Systems are versatile nozzling systems for everyday or specialized applications. Flat spray, full cone, hollow cone and solid stream patterns, metering orifices and at om iz ing tips are all avail able in the Tip-Jet system. Capacities range from .55 to 20 GPM. Tip-Jet Tips ! Neat and simple tip change ! Hardened stainless-steel tips with vanes for maximum spray integrity ! Strainers available ! Body components available in brass, zinc-plated steel or stainless-steel ! Rated to 4000 PSI Orifice 3.0 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 9.0 10.0 0° Part No 8.708-016.0 8.708-019.0 8.708-023.0 8.708-027.0 8.708-031.0 8.708-035.0 8.708-039.0 8.708-042.0 8.708-046.0 8.708-050.0 8.708-054.0 8.708-058.0 Old No 253316 253330 253338 253346 253355 253365 253375 253383 253392 253400 253415 253456 Tip-Jet Nozzle Bodies, MPT inlet con nec tions in 1/4", 3/8" and 1/2" sizes. All outlet con nec tions are 11/16" — 16 male thread to fit Tip-Jet tip retainers and adapters. Part No Tip-Jet Nozzle Bodies 8.707-886.0 8.707-898.0 8.707-899.0 8.707-916.0 Old No 252511 252640B 252642 252861P Material, MPT-1/4" Nylon Brass Stainless-steel Polypropylene Tip-Jet Adapter Caps, similar to tip re tain ers, but have FPT connections for in-line applications. Part No Tip-Jet Adapter Caps 8.707-919.0 8.707-921.0 8.707-922.0 Old No 252878B 252880B 252881 Material, MPT Brass, 1/8" Brass, 1/4" Stainless-Steel, 1/4" Tip-Jet Strainers Soft-Edge and Hard-Edge Nozzle Protector Ideal for protecting sensitive surfaces against damage. Hard plastic body is stable enough to tightly hold nozzle adapter for heavy-duty use. ! 1/4" FPT inlet/outlet ! 300° F Part No 8.723-668.0 8.723-669.0 Description ST-10 Zinc-plated Nozzle Adapter ST-10 Stainless-steel Adapter Rosebud Nozzle Guard Molded rubber guard fits tightly around the nozzle to protect the nozzle and painted surfaces. ! 1/8" meg Part No 8.710-870.0 Page 83 Old No 373012 Description Nozzle Guard 15° Part No Old No 25° Part No Old No 8.708-017.0 253317N 8.708-018.0 253318 8.708-020.0 253331 8.708-024.0 253339 8.708-028.0 253348 8.708-032.0 253357 8.708-036.0 253367 – – 8.708-043.0 253385 8.708-047.0 253393 8.708-051.0 253401 8.708-055.0 253416 8.708-059.0 253457 40° Part No Old No – – 8.708-021.0 253332 8.708-025.0 253340 8.708-029.0 253349 8.708-033.0 253358 8.708-037.0 253368 8.708-040.0 253377 8.708-044.0 253386 8.708-048.0 253394 8.708-052.0 253402 8.708-056.0 253417 8.708-060.0 253458 8.708-022.0 253333 8.708-026.0 253341 8.708-030.0 253350 8.708-034.0 253359 8.708-038.0 253369 8.708-041.0 253378 8.708-045.0 253387 8.708-049.0 253395 8.708-053.0 253403 8.708-057.0 253418 8.708-061.0 253459 Tip-Jet Retainer Caps, fits all Tip-Jet nozzle bodies, holds spray tips and me ter ing or i fic es firmly in place. Tip-Jet Retainer Caps Part No 8.707-915.0 8.707-918.0 8.707-888.0 Old No 252858B 252875 252565 Material, MPT Brass, Hex Plated Steel, Hex Stainless-Steel, Hex Tip Retainer 18 mm thread, fits vent grip lance. See tip jet nozzles in nozzle section. Part No 8.710-901.0 Old No 373065 Description Tip Retainer Tip-Jet Strainers fit into nozzle body cavity to stop nozzle clogging. Brass with stainless-steel mesh. Part No 8.707-894.0 8.707-895.0 8.707-896.0 Old No 252627 252629 252631 Material, MPT 50-Mesh 100-Mesh 200-Mesh Soap Nozzles “Black” Soap Nozzles, are brass with a large #40 orifice. Ideal for low-pressure chemical applications. Part No 8.708-478.0 8.708-479.0 Old No 255905B 255920B Size 40 40 Nozzle Degree 25° 65°

NOZZLES Turbo Nozzle The Legacy Revolution Legacy is proud to offer the Revolution rotary nozzle. This turbo rotary nozzle is rated for up to 4350 PSI at 185°F. Turning at an astounding 4,000 RPM, the Revolution delivers faster and deeper cleaning action for the same price of 3000 PSI rotary nozzles. Turbo Nozzles AP Revolution Turbo Nozzle is rated for up to 5100 PSI at 212°F. High-impact nozzle at unbelievable pricing! 3000 PSI 4000 PSI With the Legacy Revolution turbo nozzle, you get: ! Greater cleaning power: The Revolution is engineered to increase the impact pressure by more than 10 times that of conventional nozzles! ! Longer operating life: The Revolution’s operating life is extended significantly by its wear-resistant ceramic nozzle and bearing ring. ! More durable and versatile: The Revolution features an extra-resilient housing protector and is capable of handling a stream of up to 4350 PSI at 185°F. Legacy’s Revolution gives you the best of both worlds: the deep cleaning impact of a 0° nozzle and the fast cleaning of a wide-coverage fan spray nozzle. ! Forged brass ! Precision ceramic ! Durable rubber cover Nozzle Part No Orifice 3000 PSI 8.726-056.0 8.726-057.0 8.726-058.0 8.726-059.0 8.726-060.0 8.726-061.0 Nozzle Part No Old No 9.302-242.0 9.302-243.0 9.302-244.0 9.302-245.0 9.302-246.0 9.302-247.0 9.302-248.0 9.302-249.0 Repair Kit 2.884-972.0 2.883-824.0 9.302-231.0 2.883-823.0 2.883-822.0 9.302-234.0 2.884-974.0 2.884-975.0 2.884-051.0 374231 374232 374233 374234 374235 374236 374237 374238 079920 079921 079922 079923 079924 079925 079926 079927 079928 Orifice 3.5 4.0 4.5 5.0 5.5 6.5 7.0 12.0 3.5 4.0 4.5 5.0 5.5 6.5 7.0 10.0 12.0 PSI 4350 4350 4350 4350 4350 4350 4350 4350 4000 PSI 8.726-068.0 8.726-069.0 8.726-070.0 8.726-071.0 8.726-072.0 8.726-073.0 5100 PSI 8.726-080.0 8.726-081.0 8.726-082.0 8.726-083.0 8.726-084.0 8.726-085.0 3.5 4.0 4.5 5.0 5.5 6.0 3.5 4.0 4.5 5.0 5.5 6.0 3.5 4.0 4.5 5.0 5.5 6.0 Repair Kit Part No 3000 PSI 8.726-062.0 8.726-063.0 8.726-064.0 8.726-065.0 8.726-066.0 8.726-067.0 4000 PSI 8.726-074.0 8.726-075.0 8.726-076.0 8.726-077.0 8.726-078.0 8.726-079.0 5100 PSI 8.726-086.0 8.726-087.0 8.726-088.0 8.726-089.0 8.726-090.0 8.726-091.0 Orifice 3.5 4.0 4.5 5.0 5.5 6.0 3.5 4.0 4.5 5.0 5.5 6.0 3.5 4.0 4.5 5.0 5.5 6.0 5100 PSI Turbo A+ Nozzle Kit Part No Description 8.928-444.0 Page 84 Kit, A+ Turbo Nozzle #4 ! 4000 PSI !With 8.726-069.0 Nozzle !With 8.710-149.0 Inlet fitler

NOZZLES Rotojet 3700 / Rotojet 5800 0° Impact, 25° pattern, no gears — no teeth — no bearings. Exclusive design of the Rotojet 3700 / Rotojet 5800 eliminates start up impact and damage to internal nozzle. ! High-strength, forged brass ! Precision ceramic orifice and matching race 3700 PSI Part No 8.711-002.0 8.711-003.0 8.711-005.0 Rotojet 3700 PSI ! 190°F ! British pipe thread compatable inline filters 8.709-979.0 and 8.709-978.0 Must start with nozzle down. Part No 8.711-004.0 8.711-006.0 Part No 8.711-008.0 8.711-007.0 5800 PSI Part No 8.711-009.0 8.711-010.0 8.711-011.0 8.711-012.0 8.711-013.0 Rotojet 5800 PSI ! 200°F Part No 8.711-014.0 8.711-015.0 8.711-016.0 8.711-017.0 8.711-018.0 Part No 8.711-019.0 8.711-020.0 8.711-023.0 8.711-021.0 Old No 374130 374131 374134 Old No 374132 374135 Old No 374137 374136 Old No 374142 374143 374144 374145 374146 Old No 374148 374150 374151 374153 374156 Old No 374158 374160 374162 374161 Size 3.0 3.5 4.0 Size 4.5 5.0 Size 5.5 6.0 Size 3.0 3.5 4.0 4.5 5.0 Size 5.5 6.0 6.5 7.0 8.0 Size 9.0 10.0 11.0 12.0 PSI 3700 3700 3700 PSI 3700 3700 PSI 3700 3700 PSI 5800 5800 5800 5800 5800 PSI 5800 5800 5800 5800 5800 PSI 5800 5800 5800 5800 Repair Kit Part No 8.704-039.0 8.704-038.0 8.704-040.0 Part No 8.704-041.0 8.704-042.0 Part No 8.704-043.0 8.704-044.0 Repair Kit Part No 8.704-065.0 8.704-066.0 8.704-067.0 8.704-068.0 8.704-069.0 Part No 8.704-070.0 8.704-071.0 8.704-072.0 8.704-073.0 8.704-074.0 Part No 8.704-075.0 8.704-076.0 8.704-077.0 8.704-078.0 ! Durable rubber/plastic cover ! 1/4" BSPP Old No 109297 109296 109298 Old No 109299 109300 Old No 109301 109302 Old No 109428 109429 109430 109431 109432 Old No 109433 109434 109435 109436 109437 Old No 109438 109439 109440 109441 Size 3.0 3.5 4.0 Size 4.5 5.0 Size 5.5 6.0 Size 3.0 3.5 4.0 4.5 5.0 Size 5.5 6.0 6.5 7.0 8.0 Size 9.0 10.0 11.0 12.0 PSI 3700 3700 3700 PSI 3700 3700 PSI 3700 3700 PSI 5800 5800 5800 5800 5800 PSI 5800 5800 5800 5800 5800 PSI 5800 5800 5800 5800 Nozzle - Turbo Provides great impact and cleaning power. 8.711-098.0 8.711-088.0 Part No 8.711-105.0 8.711-097.0 8.711-098.0 8.711-099.0 8.711-100.0 Part No 8.711-086.0 8.711-087.0 8.711-088.0 8.711-089.0 8.711-090.0 Old No 374369 374361 374362 374363 374364 Old No 374350 374351 374352 374353 374354 Orifice 3.0 3.5 4.0 4.5 5.0 Orifice 3.0 3.5 4.0 4.5 5.0 PSI 3650 3650 3650 3650 3650 PSI 5100 5100 5100 5100 5100 Part No 8.711-101.0 8.711-102.0 8.711-096.0 8.711-103.0 8.711-104.0 Part No 8.711-091.0 8.711-092.0 8.711-093.0 8.711-094.0 8.711-095.0 Old No 374365 374366 374360 374367 374368 Old No 374355 374356 374357 374358 374359 Page 85 Orifice 5.5 6.0 6.5 7.0 8.0 Orifice 5.5 6.0 6.5 7.0 8.0 PSI 3650 3650 3650 3650 3650 PSI 5100 5100 5100 5100 5100 Turbo Nozzle Repair Kits (for 3650 and 5100 PSI) Part No Description 8.749-912.0 8.749-913.0 8.749-914.0 8.749-915.0 8.749-916.0 8.749-917.0 8.749-918.0 8.749-919.0 8.749-920.0 8.749-921.0 Repair Kit YR51K30 Repair Kit YR51K35 Repair Kit YR51K40 Repair Kit YR51K45 Repair Kit YR51K50 Repair Kit YR51K55 Repair Kit YR51K60 Repair Kit YR51K65 Repair Kit YR51K70 Repair Kit YR51K80

NOZZLES Nozzles - Suttner Turbo ! Forged brass ! Precision ceramic orifice ST-357 Part No 8.710-986.0 8.710-987.0 8.710-989.0 8.710-988.0 8.710-991.0 8.710-993.0 8.710-992.0 ST-357 – 3600 PSI ST-357 – Repair Kit Part No 8.701-570.0 8.701-569.0 8.701-564.0 8.701-562.0 8.701-565.0 8.701-568.0 8.701-566.0 ST-457 Part No ST-457 – 5800 PSI 8.711-072.0 8.711-073.0 8.711-074.0 8.711-075.0 8.711-076.0 8.711-077.0 8.711-078.0 8.711-079.0 8.711-080.0 8.711-081.0 Old No 374300 374301 374302 374303 374304 374305 374306 374308 374309 374310 ST-457 – Repair Kit Part No 8.701-572.0 8.701-571.0 8.701-573.0 8.701-574.0 8.701-575.0 8.701-576.0 8.701-577.0 8.701-578.0 8.701-579.0 8.701-580.0 Old No 085465A 085465 085466 085467 085468 085469 085470 085472 085473 085474 Size 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 10.0 Size 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 10.0 PSI 6000 6000 3600 6000 6000 6000 6000 6000 6000 6000 PSI 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 Old No 085458 085457 085452 085449 085453 085456 085454 Size 3.0 3.5 4.0 4.5 5.0 5.5 6.0 PSI 3600 3600 3600 3600 3600 3600 3600 Old No 374103 374104 374106 374105 374107 374109 374108 Size 3.0 3.5 4.0 4.5 5.0 5.5 6.0 PSI 3600 3600 3600 3600 3600 3600 3600 ! Rubber cover/protector ! 190°F Page 86

NOZZLES Nozzle - Dirt Killer Rotating 4700 maximum PSI, a popular model providing great impact and leaning power. ! 180°F maximum temperature ! 1/4" inlet 8.712-429.0 Part No 8.712-429.0 8.701-160.0 8.740-148.0 8.701-161.0 Old No 4-20091 4-200910 4-20092 4-200920 Orifice 045 Repair Kit 055 Repair Kit PSI 3200 4700 Part No Brass 8.705-150.0 8.705-155.0 8.705-151.0 Steel 8.710-713.0 8.710-712.0 8.710-714.0 Rotojet Soft – Hard Rotating Nozzle Offers the cleaning efficiency of a high-pressure rotating nozzle with the feature of changing from a hard spray for concrete to a soft spray for wood by simply pushing or pulling the finger protected nozzle. ! 3600 PSI 8.711-054.0 Part No 8.711-052.0 8.711-053.0 8.711-054.0 8.711-055.0 Old No 374245 374246 374247 374248 Orifice 030 035 040 045 Rotomax Rotating Nozzle 3500 and 5800 PSI ! Up to 5800 PSI max pressure ! 1/4" FPT inlet ! 176°F max temperature !Weight 9 oz ! Replaceable stainless-steel orifices Part No MV Triple-Function Nozzle Provides three cleaning options: low-pressure for soap or chemical application; a 15° angle for high-pressure cleaning; and a rotating nozzle for maximum cleaning efficiency. ! 3000 PSI 8.711-068.0 Part No 8.711-067.0 8.711-068.0 Old No 374291 374292 Orifice 035 040 8.711-035.0 8.711-036.0 8.711-037.0 8.711-038.0 8.711-039.0 8.701-532.0 Old No 374205 374210 374215 374216 374217 084400X Description Rotomax I Rotomax II Rotomax III Rotomax 401 Rotomax 403 Repair Kit PSI 3500 3500 3500 5800 5800 Std Nozzle Equiv 4.5 5.5 6.5 4.5 6.5 Old No 140452 140502 140454 368903 368902 368904 Description 1/8" x 1/8" 1/4" x 1/8" 1/4" x 1/4" 1/8" X 1/8" 1/4" x 1/8" 1/4" x 1/4" Lance Nozzle Couplers Changes MPT lance to FPT for mounting MPT nozzles. Viper Rotating Nozzle ! 5000 PSI max pressure ! 190°F max temperature ! 1/4" FPT inlet !Weight 1.0 oz Part No 8.711-000.0 8.711-001.0 8.701-163.0 8.701-166.0 Old No 374126 374127 080004 080006 Description Viper Viper Repair Kit Repair Kit PSI 5000 5000 5000 5000 Std Nozzle Equiv 4.5 5.5 4.5 5.5 Page 87

NOZZLES MV Hi-Lo Turbo Nozzle Nozzle - Multi-Fan Combines the power of a 0° stream and a 20° wide-angle spray pattern to improve cleaning. Hi-Lo pressure feature eliminates changing to a low-pressure nozzle for soap and chemical application. ! 2500 PSI 8.711-070.0 Adjust from maximum Impact Zero Stream to 80° wide-angle spray with a twist of the nozzle body ! 1/4" FPT connect ! 2900 PSI ! Replaceable stainless steel orifices ! Stainless-steel deflector ! 210°F Part No Part No 8.711-069.0 8.711-070.0 Old No 374294 374295 Orifice 030 035 Rotojet 2000 Economy turbo nozzle. ! Great for economy washers ! 2000 PSI max pressure Part No 8.711-026.0 8.711-027.0 8.711-028.0 Old No 374175 374176 374177 ! 1/4" FPT inlet ! 5.4 oz weight ! 140°F max temperature Size 3.0 3.5 4.0 Color Yellow Black Blue 8.710-932.0 8.710-933.0 8.710-934.0 8.710-935.0 8.710-936.0 8.710-937.0 8.710-938.0 8.710-939.0 8.710-940.0 8.710-941.0 8.710-942.0 Old No 373352 373353 373354 373356 373357 373358 373359 373360 373361 373362 373363 Color Yellow White Blue Brown Green Sky Black – – – – Orifice 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 Interchangeable Orifice – Fits Nozzles Above Replacement Orifices for duo-reg and multi-fan nozzles. Part No Nozzle - Duo-Reg Duo-Reg Nozzles are designed for in dus tri al use in ALL applications. Easy push/pull, low-to-high pressure change, and easy-turn to adjust from 0° to 80° fan patter ! Stainless-steel replaceable orifices ! 3000 PSI capability ! 300°F ! 1/4" FPT connect ! Tough glass-filled nylon cover ! Compact size: 3-3/8" long, 1-3/16" diameter, 5.7 oz weight Part No 8.710-959.0 8.710-960.0 8.710-961.0 8.710-962.0 8.710-963.0 8.710-964.0 8.710-965.0 8.710-966.0 Old No 374030 374035 374040 374045 374050 374055 374060 374065 Color Yellow White Blue Brown Green Sky Black Drk Green Orifice 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 8.701-448.0 8.701-449.0 8.701-450.0 8.701-452.0 8.701-453.0 8.701-454.0 8.701-455.0 8.701-456.0 8.701-458.0 8.701-459.0 8.701-460.0 Old No 084021 084023 084025 084027 084028 084029 084030 084031 084033 084034 084035 Orifice 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 High-Pressure Nozzle Filters Turbo nozzle protector. 8.709-978.0 ! 1/4" MPT outlet ! 300°F max temperature ! 100-mesh screen ! 5000 PSI max pressure 8.710-150.0 Part No Rollover Nozzle Head - ST-56 ! Brass body ! 3600 PSI max pressure ! 8 GPM max flow ! 300°F max temperature Part No 8.710-895.0 Old No 373056 ! Glass-filled polyimide cover ! 1/4" FPT inlet and outlet 8.709-978.0 8.709-979.0 8.710-149.0 8.710-150.0 8.704-234.0 8.701-201.0 Description Rollover Nozzle Head Page 88 Old No 342040 342042 347097 347098 110595 080115 Material Brass Brass 416 SS Brass Inlet 1/4" FPT 1/4" QC 1/4" QC 1/4" MPT 8.710-149.0 Outlet 1/4" MPT 1/4" MPT 1/4" MPT 1/4" MPT Replacement filter for 342040/342042 Replacement filter for 347097/347098 8.709-979.0

NOZZLES HL250 High/Low Variable Angle Nozzle Push/Pull for easy change between high- and low-pressure; simple twist to adjust 0°-80° spray fan pattern. ! Stainless-steel replaceable orifice ! Durable glass-filled nylon cover ! 200° ! 4000 PSI ! 1/4" FPT inlet !Weight: .4 lbs Part No 8.710-972.0 8.710-973.0 8.710-974.0 8.710-975.0 8.710-976.0 8.710-977.0 8.710-978.0 8.710-979.0 8.710-980.0 8.710-982.0 8.710-983.0 Old No 374086 374087 374088 374090 374091 374092 374093 374094 374095 374097 374098 Color Lt Green Pink White Brown Dk Yellow Blue Purple Dark Red Dk Green Orange Silver Orifice 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 Rollover Nozzle – Twist-Type Holds two meg nozzles on opposite sides for positive change from chemical application to high-pressure rinse. ! Nickel-plated brass body ! 180°F max temperature ! 1000 PSI max pressure Part No 8.710-893.0 8.900-022.0 Old No 373054 075020X Adjustable Nozzle Compact, full-feature unit weighs only 4.3 oz, same functions as ST-51N. ! 3600 PSI max pressure ! 10 GPM max flow ! 300°F max temperature Part No 8.710-891.0 Double Nozzle Head ! Durable machined-brass body ! Stainless-steel ball ! Chemical-resistant ! 3600 PSI max pressure ! 300°F max temperature ! Up to 10 GPM flow for low side pressure at 250 PSI Part No 8.710-897.0 Old No 373058A ! Heavy nickel-plate ! 1/4" female inlet, two female outlets ! New ball guide and seat Description Double Nozzle Head Old No 373051P ! Machined-brass body ! Nylon adjustment knob ! 1/4" FPT inlet/outlet Description Adjustable Nozzle Description Dual 1/4" FPT in/out Repair Kit Steam Nozzle ! One-piece brass ! 1450 PSI ! Steam nozzle – 1/4" F ! Steam blank – 3/8" M Part No 8.710-958.0 8.710-957.0 8.904-374.0 8.712-415.0 ST-51N Adjustable Nozzle Nozzle holder allows water to be diverted around the fixed orifice nozzle, dropping the pressure and allowing the chemical injector to operate. ! Attaches to 1/4" MPT lance ! Accepts 1/4" meg nozzles ! 8.0 GPM max flow ! 300°F max temperature Part No 8.710-889.0 Old No 373051 ! 3600 PSI max pressure ! 5.9 oz weight Slip-on Nozzle Protector A durable, easy-to-use nozzle protector. Plastic rubber compound — flexible and tough! Description ST-51N ! 1-1/2" diameter at flare-end ! Slip-fits standard lances ! 2-1/2" long ! Only 1.2 oz! ! Slip-on to Lance ! At tach noz zle coupler and noz zle Part No 8.710-868.0 Variable Angle Nozzle ! One-piece brass ! 1450 PSI Part No 8.710-971.0 Old No 373006 ! Slide pro tec tor for ward for complete nozzle protection Old No 373710 373702 373705 Steam Nozzle Blank Description Flat Steam Nozzle, 1.5mm Steam Nozzle Blank – Drill to Size Nozzle Blank, Drilled to 1.6mm Steam Nozzle, Drilled to 5/64" Flat Steam Nozzle Description Slip-on Nozzle Protector ! Steam nozzle – 1/4" F ! Steam blank – 3/8" M Description Variable Angle Nozzle Page 89

NOZZLES Sewer/Tube Cleaning Nozzles The reverse jets on the fixed and rotary nozzles pull the hose through the tube or sewer line and blast debris from line or tube walls. ! 4200 PSI ! Physically small for cornering ability ! Corrosion-resistant stainless-steel construction ! Orifice size indicated on non-rotating styles Part No 8.710-874.0 8.710-878.0 8.710-876.0 8.710-877.0 8.710-880.0 8.710-879.0 8.710-881.0 8.710-885.0 8.710-884.0 8.710-886.0 8.710-883.0 8.710-882.0 Old No Non-Rotating Sewer Nozzles 8.710-875.0 373024 373023 373027 373025 373026 373029 373028 373032 373038 373037 373039 373036 373035 Nozzle 1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" Orifice Size O.D. 4.5 5.5 4.5 5.5 6.0 7.5 8.0 12 4.0 5.5 8.5 12 14 .580" .580" .730" .730" .730" .730" .730" .730" .920" .920" .920" .920" .920" ! Backward ports drive the nozzle forward and flush debris ! Forward ports blast into pipe and breaks up clogs and debris ! Rotating style adds extra agitation and surface cleaning Ports 0-forward, 3 back 1-forward, 3 back 1-forward, 3 back 1-forward, 3 back 1-forward, 4 back 1-forward, 4 back 1-forward, 3 back 1-forward, 3 back 1-forward, 3 back 1-forward, 3 back 1-forward, 4 back 1-forward, 4 back 1-forward, 4 back 0-forward, 3 back ports 1-forward, 4 back ports 1-forward, 3 back ports Part No 8.710-898.0 8.710-900.0 8.710-887.0 Old No Rotating Sewer Nozzles 8.710-899.0 373062 373061 373064 373040 Rotating Nozzle Size 1/8" 1/4" 1/4" *Duct Cleaner jet to sides instead of reverse 5.5 5.5 8.0 1/4" Duct Clnr* 5.5 Ports 0-forward, 3 back 0-forward, 3 back 0-forward, 3 back 0-forward, 2 side ! Rotating sewer nozzle ! Adds extra agitation ! 4000 PSI ! Back Jet Only Legacy Compact Foamer Generates a high-density clinging foam for extended dwell time to increase chemical action. ! Stainless-steel, aluminum and brass ! 5" long, 1" diameter ! 4 and 6.5 nozzle included ! 1-5 GPM max flow ! 195°F max temperature ! 2500 PSI max pressure Part No 8.903-998.0 8.903-999.0 Old No 344022V 344023V Description 1/8" F Inlet 1/4" F Inlet NOTE: Most cleaning chemicals perform best when applied at 120°-150°F and can be applied as a foam by adding a foaming agent. See your chemical supplier to obtain the correct product. Nozzle Protector/Coupler ! Protect nozzles and finished surfaces ! Deep nozzle recess ! Tough plastic protector ! 1/4" FPT coupler inlet Part No 8.710-866.0 8.710-867.0 Old No 373002 373004 Nozzle 1/8" 1/4" Page 90 ! Stainless-steel 1.5mm orifice (#5.5 nozzle equivalent) ! Brass meter valve ! 3200 PSI max pressure ! High-impact glass-filled body Part No 8.710-125.0 8.710-126.0 8.704-222.0 Old No 344030 344032 110311 ! 4.8 GPM max flow ! Stainless-steel foam turbulator ! 140°F max temperature ! 1/4" FPT lance connect Description Foam Cannon/ Injector Foam Cannon/ Injector/Bottle Replacement Turbulator Screen 0-forward, 3 back ports 0-forward, 2 side ports Foam Cannon The ideal foam generator application accessory meters the foaming chemical for customized foam type and applies the foam to match the application.

PUMPS & PUMP KITS Legacy HD Pumps — the most durable pump on the market. Legacy is introducing the next wave in high-pressure pumps, the Legacy HD Pump. This heavy-duty, high-pressure pump is the outcome of years of research and development, resulting in a number of upgrades over previous pump models. Premium, long-life components and new design features make the Legacy HD pump a standout among other high-pressure pumps. Tests prove it will hold up better in rugged working conditions Stronger crankcase housing with thicker aluminum cross members and mounting feet for added strength. Crankcase features longer overall length to ensure less stress on all parts and a longer life of the pump. Super-strong, two-piece connecting rods designed with double-feeder grooves to maximize lubrication for a dramatically cooler running pump. High-temperature, long-life U-seals correctly fitted for each pump. Oil level dipstick is vented allowing for heat expansion. Oil level sight glass allows for quick and easy oil inspection. Premium European-quality tapered roller bearings on both the drive-side and oppositedrive-side of the pump allow for heavier and demanding loads while greatly reducing noise levels and heat build-up. Dacromet® finish on manifold bolts adds extra rust protection. Precision machined crankshafts for easy assembly and disassembly. Solid-shaft models have a full 55mm shaft length to easily accept pulley and sheaves. 5YR. LIMITED WARRANTY Polished stainless-steel plunger rod reduces friction heat for a smoother and cooler operation. Precision-ground and highly-polished solid ceramic plungers designed and manufactured to withstand dramatic temperature and pressure spikes. Revolutionary forged-brass heads with exclusive “deep-well-sealing” valve caps eliminate any head pressure effects to the valve cap and valve cap thread. Take the Legacy HD Pump Durability Challenge! Belt Drive Pumps GX SERIES: 1/2" inlet x 3/8" outlet Part No 8.921-661.0 8.921-662.0 8.920-597.0 8.920-598.0 8.920-599.0 8.920-600.0 8.920-602.0 8.920-603.0 8.752-809.0 Model No. GX5450R GX5450L GX9536.2R GX9536.2L GX1036.2R GX1036.2L GX1622.2R GX1622.2L GX8043.2 GPM 5.4 5.4 9.5 9.5 10.4 10.4 15.8 15.8 7.9 Page 91 PSI 5000 5000 3625 3625 3625 3625 2200 2200 4350 HP 17.0 17.0 23.6 23.6 25.8 25.8 23.8 23.8 23.5 RPM 1740 1740 1740 1740 1740 1740 1740 1740 1740 Shaft 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 25mm Weight 39 lbs 39 lbs 38 lbs 38 lbs 38 lbs 38 lbs 38 lbs 38 lbs 38 lbs We believe the Legacy HD Pump is the strongest, most durable pump in the market. We’ve tested the pump in extreme conditions and are confident in it’s strength and performance. We ran the pump dry in separate tests for 24 hours, and the pump showed no sign of wear. We challenge you to try the new Legacy HD Pump. Run the pump dry. Take it apart and look how well it holds up. The Legacy HD holds up in these extreme conditions. Imagine how it will perform with everyday regular use!

PUMPS & PUMP KITS Legacy Pumps (continued) – Belt Drive Units GM SERIES: 1/2" inlet x 3/8" outlet Part No GM Series 8.751-197.0 8.751-198.0 8.751-200.0 8.751-201.0 8.751-202.0 8.751-203.0 8.751-244.0 8.751-245.0 Model # GM3540R.3 GM4030R.3 GM4035R.3 GPM 3.5 4 4.8 GM4035L.3-Left 4.8 GM5030R.3 GM5030L.3 GM6035R.3 GM6035L.3 5.1 5.1 5.6 5.6 PSI 4000 3000 3500 3500 3000 3000 3500 3500 HP 9.5 8.2 7.5 7.5 13.5 13.5 13.5 13.5 RPM 1850 1000 1500 1500 1550 1550 1750 1750 Shaft 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm Weight 22 lbs 22 lbs 22 lbs 22 lbs 22 lbs 22 lbs 22 lbs 22 lbs GT SERIES: 1/2" inlet x 3/8" outlet Part No Model # GT Series 8.921-722.0 8.921-723.0 8.921-724.0 8.921-725.0 8.921-726.0 8.921-727.0 GT4540.2R GT4540.2L GT6036.2R GT6036.2L GT5636.2R GT5636.2L GPM 4.5 4.5 6.0 6.0 5.6 5.6 PSI 4000 4000 3600 3600 3600 3600 HP 12.3 12.3 14.8 14.8 13.8 13.8 RPM 1360 1360 1450 1450 1450 1450 Shaft 25mm 25mm 25mm 25mm 24mm 24mm Weight 39 lbs 39 lbs 39 lbs 39 lbs 39 lbs 39 lbs GB SERIES: 1/2" inlet x 3/8" outlet Part No 8.923-809.0 8.923-810.0 8.923-811.0 8.923-812.0 GB Series READY TO GO SERIES: ! Includes a pump, unloader, thermal protector, bypass loop hose, garden hose inlet with filter, and quick coupler. Part No RTG Series 8.924-458.0 8.924-459.0 8.924-460.0 8.924-461.0 8.924-462.0 8.924-463.0 Model # GP3035G GP3535G1 GS4040G.3 GB3030R GM3540R.3 GM3840R.3 TYPE Direct Direct Direct Belt Belt Belt GPM 3.0 3.5 4.0 3.0 3.5 3.8 PSI 3500 3500 4000 3000 4000 4000 RPM 3400 3400 3400 1650 1850 1740 Shaft 3/4" 1" 1" 24mm 24mm 24mm Unloader VRT3 VRT3 VRT3 VRT3 VRT3 VRT3 Model # GB3030R GB3030L GB4025R GB4025L GPM 3.0 3.0 4.0 4.0 PSI 3000 3000 2500 2500 HP 6.2 6.2 6.8 6.8 RPM 1650 1650 1550 1550 Shaft 24mm 24mm 24mm 24mm Weight 14.5 lbs 14.5 lbs 14.5 lbs 14.5 lbs Page 92

PUMPS & PUMP KITS Legacy Pumps – Belt Drive Units HFR SERIES: ! 1"-1-1/4" inlet x 3/4" outlet Part No HFR Series 8.751-672.0 8.751-673.0 8.751-674.0 8.751-675.0 8.751-676.0 8.751-677.0 8.751-678.0 8.751-679.0 8.751-680.0 8.751-681.0 8.751-688.0 8.751-689.0 8.751-690.0 8.751-691.0 8.751-692.0 8.751-693.0 Model No. HFR40SL HFR40SR HFR60SR HFR60SL HFR40FL HFR40FR HFR60FR HFR60FL HFR80FL HFR80FR HFR80SL HFR80SR HFR105SL HFR105SR HFR120SL HFR120SR GPM 10.6 10.6 15.9 15.9 10.6 10.6 15.9 15.9 21.1 21.1 21.1 21.1 27.7 27.7 31.7 31.7 PSI 4100 4100 4100 4100 4100 4100 4100 4100 4100 4100 2200 2200 2200 2200 2200 2200 HP 29.8 29.8 44.7 44.7 29.8 29.8 44.7 44.7 59.3 59.3 31.8 31.8 41.7 41.7 47.8 47.8 RPM 1000 1000 1000 1000 1450 1450 1450 1450 1450 1450 1000 1000 1000 1000 1000 1000 Shaft Dia Inlet 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" Outlet 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" Wt (lbs) 106 lbs 106 lbs 106 lbs 106 lbs 106 lbs 106 lbs 106 lbs 106 lbs 106 lbs 106 lbs 106 lbs 106 lbs 106 lbs 106 lbs 106 lbs 106 lbs Legacy Pumps – Belt Drive Units HHP SERIES: !3/4" inlet x 1/2" outlet Part No HHP Series 8.751-682.0 8.751-683.0 8.751-684.0 8.751-685.0 8.751-686.0 8.751-687.0 8.751-694.0 8.751-695.0 8.751-696.0 8.751-697.0 8.751-698.0 8.751-699.0 8.751-700.0 8.751-701.0 Model No. HHP25SL HHP25SR HHP30SR HHP30SL HHP38FL HHP38FR HHP4150R HHP4150L HHP3650R HHP3650L HHP2750R HHP5750L HHP5040R HHP5040L NMT SERIES: !1/2" inlet x 3/8" outlet Part No Model No. NMT Series 8.754-109.0 8.754-110.0 8.754-111.0 8.755-731.0 GPM 6.6 6.6 7.9 7.9 10 10 10.8 10.8 9.5 9.5 7.1 7.1 13.3 13.3 PSI 7250 7250 7250 7250 5000 5000 7250 7250 7250 7250 7250 7250 5800 5800 HP 32.8 32.8 39.2 39.2 34.2 34.2 53.6 53.6 47.2 47.2 35.3 35.3 52.8 52.8 RPM 1000 1000 1000 1000 1450 1450 1450 1450 1450 1450 1450 1450 1740 1740 Shaft Dia Weight (lbs) 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 112 lbs 112 lbs 112 lbs 112 lbs 112 lbs 112 lbs 112 lbs 112 lbs 112 lbs 112 lbs 112 lbs 112 lbs 112 lbs 112 lbs GPM NMT15200CWR 4.7 NMT1520SCWR 4.8 NMT2120CWR 6.6 NMT2525IS 7.9 NMT ES SERIES: !1/2" inlet x 3/8" outlet Part No Model No. 8.754-112.0 NMT ES Series Page 93 NMT2120ESR PSI 3000 3000 3000 3625 HP 9.7 9.9 13.6 19.6 RPM 1740 1200 1740 1200 Shaft Dia Weight (lbs) 24mm 24mm 24mm 24mm 21 lbs 21 lbs 21 lbs 41 lbs GPM 6.6 PSI 3000 HP 13.6 RPM 1740 Shaft Dia Weight (lbs) 24mm 26 lbs

PUMPS & PUMP KITS Legacy Pumps – Direct Drive Units GS SERIES: ! 1/2" inlet x 3/8" outlet ! Direct couple-to-gas engine Part No GS Series 8.751-205.0 8.751-206.0 8.751-207.0 8.751-208.0 Model # GS3040G.3 GS3540G.3 GS4040G.3 GS5030G.3 GPM 3.0 3.5 4.0 5.0 PSI 4000 4000 4000 3000 HP 9.0 11.0 13.0 16.0 RPM 3400 3400 3400 3400 Shaft 1" Hollow 1" Hollow 1" Hollow 1" Hollow Weight 24.5 lbs 23 lbs 23 lbs 24.5 lbs GP SERIES: ! 1/2" inlet x 3/8" outlet ! Direct couple-to-gas engine Part No GP Series 8.923-813.0 8.923-814.0 8.923-815.0 8.923-816.0 8.923-817.0 Model # GP2535G GP3035G GP3035G1 GP3535G1 GP4035G1 GPM 2.5 3.0 3.0 3.5 4.0 PSI 3500 3500 3500 3500 3500 HP 6.0 7.2 7.2 8.4 9.6 RPM 3400 3400 3400 3400 3400 Shaft Weight 3/4" Hollow 16.75 lbs 3/4" Hollow 16.75 lbs 1" Hollow 1" Hollow 1" Hollow 18 lbs 18 lbs 18 lbs GF SERIES: ! 1/2-14 BSPP-F inlet x 3/8-19 BSPP-F outlet ! Direct couple-to-electric motor ! NEMA 56C Frame Part No GF Series 8.923-818.0 8.923-819.0 8.923-820.0 8.923-821.0 8.923-822.0 Model # GF2030F GF2030S GF2830F GF2830S GF3530F GPM 2.1 2.1 2.8 2.8 3.5 PSI 3000 3000 3000 3000 3000 HP 4.3 4.3 5.8 5.8 7.2 RPM 3450 1725 3450 1725 3450 Shaft Weight 5/8" Hollow 17 lbs 5/8" Hollow 17 lbs 5/8" Hollow 17 lbs 5/8" Hollow 17 lbs 3/4" Hollow 17 lbs FOG SERIES: ! 3/8-19 BSPP-F inlet x 3/8-19 BSPP-F outlet ! Direct couple-to-electric motor ! NEMA 56C Frame Part No FOG Series 8.754-500.0 8.754-501.0 8.754-502.0 8.754-503.0 Model # FOG0614R FOG1214R FOG1914R FOG2514R GPM 0.6 1.2 1.9 2.5 PSI 1450 1450 1450 1450 HP 0.6 1.2 1.9 2.5 RPM 1740 1740 1740 1740 Shaft Weight 5/8" Hollow 12 lbs 5/8" Hollow 12 lbs 5/8" Hollow 12 lbs 5/8" Hollow 12 lbs HY SERIES: ! 1/2" inlet x 3/8" outlet ! Direct couple-to-electric motor Part No 8.754-984.0 8.754-985.0 HY Series Model # HY1515 HY1520 GPM 4 4 PSI 3000 3000 HP 5.5 8.2 RPM 1450 1450 Shaft Weight 5/8" Hollow 16.75 lbs 5/8" Hollow 16.75 lbs Page 94

PUMPS & PUMP KITS Legacy Pumps – Belt Drive Units TML SERIES: ! Industrial Triplex Plunger Pump with Al Connecting Rods ! 1450 RPM pulley drive with 24mm solid shaft, 1/2" inlet x 3/8" outlet, 18.9 lbs. ! Compare to: General Pumps — the TS series and AR Pumps — RK series. Part No TML 8.703-382.0 8.703-457.0 TTV SERIES: ! Heavy Industrial Triplex Plunger Pump with Al Connecting Rods ! 1450 RPM pulley drive with 24mm solid shaft, 3/4" inlet x 3/8" outlet, 31.9 lbs. ! Compare to: General Pumps — the TS series and AR Pumps — RK series. Part No TTV 8.703-387.0 Original No. 105954 Model No. TTV-3555 Shaft 24mm GPM 5.5 NOTE: Can be run at 1750 RPM. Please note the pump ships without rails. KKV SERIES: ! Heavy Industrial Triplex Plunger Pump with Al Connecting Rods ! 1450 RPM and 1725 RPM pulley drive with 30mm solid shaft, 1" inlet x 1/2" outlet, 39.6 lbs. Shaft 30mm Part No 8.703-391.0 KKV Pump Rails Part No 8.900-756.0 8.900-757.0 Original No. 105962 Model No. KKV-3087 Please note the pump ships without rails. Original No. 108762 108763 Legacy Pumps – Direct Drive Units WJG SERIES: ! Triplex Plunger Pump with Bronze Connecting Rods ! 3450 RPM direct drive with 3/4" hollow shaft and SAE flange, 3/8" inlet x 3/8" outlet, 13.2 lbs. ! Compare to: General Pumps — the TP series and AR Pumps — XTV series. Original No. Part No 8.703-342.0 WJG WJH-F SERIES: WJH-F and WJH ! Triplex Plunger Pump with Bronze Connecting Rods ! 3450 RPM direct drive with 5/8" hollow shaft and NEMA 56C flange, 3/8" inlet x 3/8" outlet, 13.2 lbs. ! Compare to: General Pumps — the TT series and AR Pumps — XTV series. WJH SERIES: ! Triplex Plunger Pump with Al Connecting Rods ! 1725 RPM direct drive with 5/8" hollow shaft and NEMA 56C flange, 3/8" inlet x 3/8" outlet, 13.2 lbs. ! Compare to: General Pumps — the T & TT series and AR Pumps — XTA series. Part No WJH-F 8.703-346.0 WJH 8.703-348.0 8.703-349.0 WMG SERIES: ! Premium Triplex Plunger Pump with Bronze Connecting Rods ! 3450 RPM direct drive with 3/4" hollow shaft and SAE flange, 1/2" inlet x 3/8" outlet, 14.7 lbs. ! Compare to: General Pumps — the TX series and AR Pumps — XMV series. Part No WMG 8.703-351.0 Original No. 105842 Model No. WMG-2530 Shaft 3/4"H Page 95 GPM 3.0 PSI 2500 RPM 3450 Original No. 105822 105830 105832 Model No. WJH-2525-F WJH-2121 WJH-2132 Shaft 5/8"H 5/8"H 5/8"H GPM 2.5 2.1 3.2 PSI 2500 2100 2100 RPM 3450 1725 1725 105812 Model No. WJG-2525 Shaft 3/4"H GPM 2.5 PSI 2500 RPM 3450 Description Heavy Duty Pump Rail – Short (set) Heavy Duty Pump Rail – Tall (set) GPM 8.7 PSI 3000 RPM 1725 PSI 3500 RPM 1450 Original No. 105924 106756 Model No. TML-3053 Shaft 24mm Pump Rail Set (Kit) NOTE: Can be run at 1750 RPM. Please note the pump ships without rails. GPM 5.3 PSI 3000 RPM 1450

PUMPS & PUMP KITS Legacy Pumps – Direct Drive Units WMG 1" SERIES: ! Premium Triplex Plunger Pump with Bronze Connecting Rods ! 3450 RPM direct drive with 1" hollow shaft and SAE flange, 1/2" inlet x 3/8" outlet, 14.7 lbs. ! Compare to: General Pumps — the TX series and AR Pumps — XMV series. Part No WMG 1 8.703-356.0 Original No. 105854 Model No. WMG-3540 Shaft 1"H GPM 4.0 PSI 3500 RPM 3450 TMH SERIES: ! Industrial Triplex Plunger Pump with Al Connecting Rods ! 1725 RPM direct drive with 1-1/8" hollow shaft and NEMA flange, 1/2" inlet x 3/8" outlet, 18.9 lbs. ! Compare to: General Pumps — the EZ series and AR Pumps — RKA series. Part No TMH 8.703-375.0 8.703-376.0 8.703-377.0 8.703-378.0 Original No. 105910 105912 105914 105916 Model No. TMH-3035 TMH-3040 TMH-3050 TMH-3055 Shaft 1-1/8"H 1-1/8"H 1-1/8"H 1-1/8"H GPM 3.5 4.0 5.0 5.5 PSI 3000 3000 3000 3000 RPM 1725 1725 1725 1725 Legacy Pump Horizontal Pump Part No 8.920-004.0 Shaft 3/4" Vertical Pump Part No 8.919-886.0 9.120-020.0 GPM 2.6 PSI 3000 NOTE: Can be used to replace Comet pumps listed on page 75. Shaft 7/8" 7/8" GPM 2.6 2.6 PSI 3000 3000 RPM 3400 3400 RPM 3400 with Garden Hose Fitting Inlet without Garden Hose Fitting Inlet Seal Kits for Pump Valve Kits for Part No 8.725-355.0 8.725-357.0 8.725-359.0 8.725-361.0 8.725-363.0 8.725-365.0 9.804-493.0 8.916-322.0 Kit – Packing U Seal, 15mm U Seal, 18mm U Seal, 15mm U Seal, 18mm U Seal, 20mm U Seal, 25mm U Seal, 18mm U Seal, 20mm Part No 9.802-603.0 9.802-604.0 9.802-608.0 9.803-936.0 Kit Description Valve Complete Valve Complete Valve Complete Valve Complete Page 96

PUMPS & PUMP KITS Complete Seal Kits for Plunger Oil Seal Kits for Part No 9.802-606.0 9.802-609.0 9.803-937.0 Part No 8.725-354.0 8.725-356.0 8.725-358.0 8.725-360.0 8.725-362.0 8.725-364.0 8.725-358.0 9.804-492.0 Kit Description 15mm U Seal 18mm U Seal 15mm U Seal 18mm U Seal 20mm U Seal 25mm U Seal 15mm U Seal 18mm U Seal Ceramic Plunger Kits Kit Description Kit, Plunger Oil Seals Kit, Plunger Oil Seals Kit, Plunger Oil Seals Pump Rails Part No Part No 8.717-577.0 9.802-744.0 Description Heavy Duty Pump Rail Mounting Bolts 8.754-862.0 8.754-576.0 8.933-023.0 9.803-934.0 8.753-514.0 8.754-858.0 8.754-983.0 8.751-237.0 8.753-823.0 9.802-629.0 9.803-935.0 8.751-238.0 9.802-620.0 8.752-839.0 9.802-614.0 8.752-840.0 Kit Description Kit, Plunger, 14mm Kit, Plunger, 15mm Kit, Plunger, 15mm Kit, Plunger, 15mm Kit, Plunger, 16mm Kit, Plunger, 16mm Kit, Plunger, 16mm Kit, Plunger, 18mm Kit, Plunger, 18mm Kit, Plunger, 18mm Kit, Plunger, 18mm Kit, Plunger, 20mm Kit, Plunger, 20mm Kit, Plunger, 22mm Kit, Plunger, 25mm Kit, Plunger, 28mm Pump Selection Chart for Legacy HD Direct Drive Pump Motor 9.802-339.0 9.804-517.0 9.802-340.0 8.715-090.0 9.802-341.0 12.0 cu in 16.5 cu in 20.6 cu in 23.7 cu in 23.7 cu in 23.7 cu in 20.6 cu in 23.7 cu in 29.3 cu in Engine 2HP 2HP 3HP 3HP 5HP 6.5HP 9HP 11HP 13HP 13HP 13HP 11HP 13HP 16HP Pump 3450rpm 1725rpm 3450rpm 1725rpm 3450rpm Unloader 8.904-933.0, 8.904-934.0, 8.904-936.0, 8.916-560.0, 8.904-938.0 8.904-967., 8.904-969.0, 8.904-969.0, 8.916-558.0, 8.916-559.0, 8.904-970.0, 8.904-971.0, 8.904-972.0, 8.904-973.0, Nozzle GE2020F.1 GE2020S.1 GE2825F.1 GE2825S.1 GE3525F.1 GG2530G.1 GG3035G.1 GG3035G.1 GG3535G.1 GG4030G.1 GS3040G.2 GS3540G.2 GS4040G.2 GS5030G.2 Description 9.803-899.0, VBA35, Direct # 3 9.803-899.0, VBA35, Direct# 3 9.803-899.0, VBA35, Direct# 4 9.803-899.0, VBA35, Direct# 4 9.803-899.0, VBA35, Direct # 5 9.803-899.0, VBA35, Direct # 3 9.803-899.0, VBA35, Direct # 3.5 9.803-899.0, VBA35, Direct # 3 9.803-899.0, VBA35, Direct # 3.5 9.803-899.0, VBA35, Direct # 4.5 8.715-483.0, VRT607, Remote # 3 9.803-900.0, VBA35, Direct# 4 8.715-483.0, VRT607, Remote # 4 9.803-900.0, VBA35, Direct# 5.5 GPM / PSI 1.9 / 1500 1.9 / 1500 2.5 / 1600 2.5 / 1600 3.5 / 2000 2.5 / 2700 3 / 3000 2.8 / 3500 3.3 / 3500 3.9 / 3000 3 / 4000 3.5 / 3000 4 / 4000 4.8 / 3000 Page 97

PUMPS & PUMP KITS Legacy Pump Repair Kit Selection Chart Pump Model Accessory Series HDL HG KKV KKV KTV TMG TMH TML TML-F Pump Model Accessory Series TMS TTV WJG WJH-F WJH WMG-3/4" WMG-1" WMH-F WMH WML MM 18 20 15 15 18 15 15 15 18 18 MM 18 15 22 25 20 15 18 18 15 Check Valve Kit Kit 93 Kit 84 Kit 40 Kit 40 Kit 123 Kit 123 Kit 123 Kit 123 Kit 123 Check Valve Kit Kit 123 Kit 123 Kit 84 Kit 84 Kit 84 Kit 124 Kit 124 Kit 124 Kit 63 Kit 63 Plunger Rod Oil Seal Kit Kit 37 Kit 64 Kit 37 Kit 37 Kit 37 Kit 65 Kit 65 Kit 65 Kit 65 Plunger Rod Oil Seal Kit Kit 65 Kit 37 Kit 64 Kit 64 Kit 64 Kit 64 Kit 64 Kit 64 Kit 64 Kit 64 Legacy Pump Repair Tool Kit Part No 9.802-954.0 pump repair tool kit shown. Part No 9.802-954.0 8.756-590.0 8.756-717.0 Description Legacy Pump Repair Tool Kit (For all models except GB, GP, GP1, GF) Legacy Pump Repair Tool Kit For Normal Maintenance (For models: GB, GP, GP1 and HY) Legacy Pump Repair Tool Kit For Oil Seal Mainte-ce (For models: GB, GP, GP1 and HY) 9.802-564.0 9.802-581.0 9.802-580.0 9.802-563.0 9.802-571.0 9.802-567.0 9.802-570.0 9.802-565.0 9.802-566.0 9.802-568.0 9.802-579.0 9.802-573.0 9.802-578.0 9.802-572.0 8.751-396.0 8.751-404.0 8.751-397.0 8.751-405.0 9.802-569.0 8.751-403.0 9.802-574.0 Description Guide, Oil Seal Inserter, Plunger Rod GT-GX-GH Piston, Oil Seal Inserter, Plunger Rod GT-GX-GH Piston, Oil Seal Inserter, Plunger Rod GM-GD-GG-GE-GS Guide, Oil Seal Inserter, Plunger Rod GM-GD-GG-GE-GS Wrench, Allen 8mm, Manifold Bolts GT-GX-GH Wrench, Allen 6mm, Manifold Bolts GM-GD-GG-GE-GS Wrench, Allen 5mm, Crankcase Cover Guide, Oil Seal Inserter, Crankshaft GT-GX-GH Guide, Oil Seal Inserter, Crankshaft GM-GD-GG-GE-GS Extractor, Piston Seal Piston, Seal Inserter, Manifold GM-GS Guide, Seal Inserter, Manifold GM-GS Piston, Seal Inserter, Manifold GT Guide, Seal Inserter, Manifold GT Guide, Seal Inserter, Manifold GD-GE-GG Guide, Seal Inserter, Manifold GX5050 Piston, Seal Inserter, Manifold GD-GE-GG-GH-GX Guide, Seal Inserter, Manifold GH-GX Hammer, Plastic Head Screwdriver Flathead Box, Plastic Tool Box Water Seal(s) Only Kit Kit 95 Kit 129 Kit 90 Kit 91 Kit 89 Kit 74 Kit 76 Kit 76 Kit 74 Water Seal(s) Only Kit Kit 76 Kit 89 Kit 60 Kit 60 Kit 12 Kit 73 Kit 73 Kit 73 Kit 12 Kit 12 Brass Ring Kit Kit 71 Kit 86 Kit 61 Kit 61 Kit 10 Kit 68 Kit 68 Kit 68 Kit 70 Kit 70 Brass Ring Kit Kit 96 Kit 92 Kit 87 Kit 88 Kit 86 Kit 69 Kit 71 Kit 71 Kit 69 WaterSeal(s) Cap Kit Kit 67 Kit 67 Kit 66 Kit 66 Kit 66 Kit 67 Kit 67 Kit 67 Kit 67 Kit 67 WaterSeal(s) Cap Kit Kit 94 Kit 66 Kit 132 Kit 100 Kit 99 Kit 67 Kit 67 Kit 67 Kit 67 Valve Seal Kit Kit 98 N/A Kit 98 Kit 98 Kit 98 Kit 78 Kit 78 Kit 77 Kit 77 Valve Seal Kit Kit 77 Kit 127 Kit 82 Kit 82 Kit 82 Kit 80 Kit 79 Kit 80 Kit 80 Kit 81 Page 98

PUMPS & PUMP KITS Legacy Pump Repair Kits Part No 8.703-458.0 8.703-459.0 9.803-041.0 8.703-461.0 8.703-462.0 8.932-979.0 8.900-701.0 8.900-702.0 8.703-464.0 8.703-465.0 8.703-466.0 8.703-467.0 8.703-468.0 8.703-469.0 8.703-470.0 8.703-471.0 8.703-472.0 8.703-456.0 8.703-474.0 8.703-475.0 8.703-476.0 8.703-477.0 8.703-478.0 8.703-479.0 8.703-480.0 8.703-481.0 8.703-482.0 8.703-483.0 8.703-485.0 8.703-486.0 8.703-487.0 8.703-488.0 8.703-489.0 8.703-490.0 8.703-491.0 8.703-492.0 8.703-493.0 8.900-703.0 8.703-494.0 8.703-495.0 8.703-496.0 8.703-497.0 8.703-498.0 8.703-499.0 8.703-500.0 8.703-501.0 8.703-502.0 8.703-503.0 Original No. 106810 106812 106822 106837 106840 106842 106860 106861 106863 106864 106865 106866 106867 106868 106869 106870 106871 106755 106873 106874 106876 106877 106878 106879 106880 106881 106882 106884 106886 106887 106888 106889 106890 106891 106892 106893 106894 106895 106896 106898 106899 106900 106923 106924 106926 106927 106929 106932 Kit No. Kit 10 Kit 12 Kit 22 Kit 37 Kit 40 Kit 42 Kit 60 Kit 61 Kit 63 Kit 64 Kit 65 Kit 66 Kit 67 Kit 68 Kit 69 Kit 70 Kit 71 Kit 72 Kit 73 Kit 74 Kit 76 Kit 77 Kit 78 Kit 79 Kit 80 Kit 81 Kit 82 Kit 84 Kit 86 Kit 87 Kit 88 Kit 89 Kit 90 Kit 91 Kit 92 Kit 93 Kit 94 Kit 95 Kit 96 Kit 98 Kit 99 Kit 100 Kit 123 Kit 124 Kit 126 Kit 127 Kit 129 Kit 132 Description WJH Packing / Header / Brass Assy (18mm) WM-H&L Packing Kit WJH Packing / Header only (18mm) APR.S Unloader Seal(s) Kit TTV-KTV-HDL Plunger Oil Seal Kit KKV Check Valves / O-ring Kit APR.S Unloader Valve Seal Kit V-Packing,15mm Legacy Pump WJH WJH-F&G Packing / Header only (15mm) Complete Plunger Set 15mm 18PX WJH-F&G Packing / Header / Brass (15mm) WMH&L Check Valve / O-ring Kit HG / WJ / WM Plunger Oil Seal Kit TM Plunger Oil Seal Kit HG / WJ Valve Cap / O-ring (M18x1.5) Kit WM / TM / TTV Valve Cap / O-ring (M27x1.5) WM-F&G Packing / Brass Assy Kit (15mm) TM-F&G Packing / Brass Assy (15mm) WM-H&L Packing / Brass Assy Kit (18mm) TM-H&L Packing / Brass Assy Kit (18mm) WML Pump Rail Kit (Foot, Spacer, Bolt) WM-F&G Packing Only Kit (15mm) TM-F &G Packing Only Kit (15mm) TM-H&L Packing Only Kit (18mm) TM-S&L Accessory Seals Kit TM-G Accessory Seals Kit WM-G 1” Accessory Seals Kit WM-F&G-3/4” Accessory Seals Kit WM-L Accessory Seals Kit WJH-F Accessory Seals Kit HG / WJ Check Valve / O-ring Kit TTV-KTV Packing / Brass Assy Kit (20mm) KKV Packing / Brass Assy Kit (22mm) KKV Packing / Brass Assy Kit (25mm) TTV-KTV Packing Only Kit (20mm) KKV Packing Only Kit L90 (22mm) KKV Packing Only Kit L91 (25mm) HG Packing / Brass Assy Kit HDL Check Valve / O-ring Kit HDL Valve Containment Kit L94 HDL Packing Only Kit L95 (18mm) HDL Packing / Brass Assy Kit (18mm) KTV-KKV-HDL Accessory Seal Kit KTV Valve Cap / O-ring Kit (Plated) KKV Plated Valve Cap / O-ring Kit TM-TTV-KTV Check Valve / O-ring WM-F&G Check Valve / O-ring Kit APR-35/40 Seal Repair Kit TTV Accessory Oil Seal Kit HG Packing Only Kit (15mm) KKV Valve Cap / O-ring Kit No. of Pieces 21 15 14 3 12 3 12 18 12 3 3 12 12 21 21 21 24 8 15 15 18 8 8 8 8 8 8 12 24 24 24 18 18 18 21 12 24 18 24 8 12 12 12 12 13 10 12 12 Qty Needed Per Pump 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Page 99

PUMPS & PUMP KITS Admiral Pump Repair Kits For the following Admiral pumps: WE Series; WEL Series; XD Series; XLS Series; CA Series; WG Series; XLE Series; XLG Series; C Series; IB Series Part No. 8.900-631.0 8.900-632.0 8.900-633.0 8.900-634.0 8.900-635.0 8.900-636.0 8.900-637.0 8.900-638.0 8.900-639.0 8.900-640.0 8.900-641.0 8.900-642.0 8.900-643.0 8.900-644.0 8.900-645.0 8.900-646.0 8.900-647.0 8.900-648.0 8.900-649.0 8.900-650.0 8.900-651.0 8.900-652.0 8.900-653.0 8.900-654.0 8.900-655.0 8.900-656.0 8.900-657.0 8.900-658.0 8.900-659.0 8.900-660.0 8.900-661.0 8.900-662.0 8.900-663.0 8.900-664.0 8.900-665.0 8.900-666.0 8.900-667.0 8.900-668.0 8.900-669.0 8.900-670.0 8.900-671.0 8.900-672.0 8.900-673.0 8.900-674.0 8.900-675.0 8.900-676.0 8.900-678.0 8.900-680.0 8.900-682.0 8.900-683.0 8.900-685.0 8.900-687.0 8.900-691.0 8.900-692.0 8.900-693.0 8.900-694.0 Original No. 106501 106502 106504 106505 106506 106507 106508 106509 106510 106511 106512 106513 106514 106515 106516 106517 106518 106519 106520 106521 106522 106523 106524 106525 106526 106527 106528 106529 106531 106532 106533 106534 106535 106536 106537 106538 106539 106540 106541 106542 106543 106544 106545 106546 106550 106552 106555 106557 106559 106561 106563 106566 106594 106595 106596 106597 Kit No. Kit AP1 Kit AP2 Kit AP4 Kit AP5 Kit AP6 Kit AP7 Kit AP8 Kit AP9 Kit AP10 Kit AP11 Kit AP12 Kit AP13 Kit AP14 Kit AP15 Kit AP16 Kit AP17 Kit AP18 Kit AP19 Kit AP20 Kit AP21 Kit AP22 Kit AP23 Kit AP24 Kit AP25 Kit AP26 Kit AP27 Kit AP28 Kit AP29 Kit AP31 Kit AP32 Kit AP33 Kit AP34 Kit AP35 Kit AP36 Kit AP37 Kit AP38 Kit AP39 Kit AP40 Kit AP41 Kit AP42 Kit AP43 Kit AP44 Kit AP45 Kit AP46 Kit AP50 Kit AP52 Kit AP55 Kit AP57 Kit AP59 Kit AP61 Kit AP63 Kit AP66 Kit AP94 Kit AP95 Kit AP96 Kit AP97 Description Check Valves (For WE, WG, WEL, XL Series, XD Small Brass Head) Brass Valve Covers (For WE, WG, WEL Series and XD Small Brass Head) Oil Seals 15mm Plunger Rod (For WE, WG and WEL Series) Oil Seals 18mm Plunger Rod (For XL Series) Male Adapter Rings, 15mm (For WE and WG Series) Male Adapter Rings, 18mm (For WEL, XLE and XLS Series) V-Packing Seals, 15mm (For WE and WG Series) V-Packing Seals, 18mm (For WEL Series Only) Brass Packing Gland, 15mm (For WE and WG Series) Brass Packing Gland, 18mm (For WEL Series) Complete Plunger Seal, 15mm (For WE, and WG Series) Complete Plunger Seal, 18mm (For WEL Series) Brass Packing Gland, Two Piece, 18mm (For XLE, and XLS Series) V-Packing Seals, Two Piece, 18mm (For XLE, and XLS Series) Super U-Packing Seals, 18mm (For XLG Series Only) Complete Plunger Seal, Two Piece, 18mm (For XLE, and XLS Series) Complete Plunger Seal, Super-U, 18mm (For XLG Series Only) Brass Packing Gland, Super-U, 18mm (For XLG Series Only) Valve Covers, Brass (For XLG, XLE, XLS Series, and XD Small Plated Pump) Valve Covers, Plated (For XLG, XLE, XLS, and XD Small Plated Pump) Male Adapter Rings, 18mm (For XLG Series Only) Low Pressure Seals, 18mm (For XL Series) V-Packing Seals, 15mm, Two Piece (For WE-T and WG-T Series) V-Packing Seals, 18mm, Two Piece (For WEL-T Series Only) Brass Packing Gland, 15mm, Two Piece (For WE-T and WG-T Series) Brass Packing Gland, 18mm, Two Piece (For WEL-T Series Only) Complete Plunger Seal, 15mm, Two Piece (For WE-T, and WG-T Series) Complete Plunger Seal, 18mm, Two Piece (For WEL-T Series Only) Check Valve Kit (For XD Big Head) Brass Valve Caps (For XD Big Head) Plated Valve Caps (For XD Big Plated Head) Plunger Rod Seal (For XD Pumps) Male Adapter Rings (For XD 20mm) Male Adapter Rings (For XD 22mm) Male Adapter Rings (For XD 25mm) “Super U” Packing (For XD 20mm) “Super U” Packing (For XD 22mm) “Super U” Packing (For XD 25mm) Two Piece Brass Gland (For XD 20mm) Two Piece Brass Gland (For XD 22mm) Two Piece Brass Gland (For XD 25mm) Complete Plunger Seal Repair (For XD 20mm) Complete Plunger Seal Repair (For XD 22mm) Complete Plunger Seal Repair (For XD 25mm) Check Valve Kit (For C-Pumps, Brass Head) Check Valve Assemblies (For IB-1000 Series, and CA Series) Oil Seals, 45mm Plunger Rod (For IB-1000 Series, C and CA Series) Male Adapter Rings, 45mm (For IB-1000 Series, C and CA Series) V-Packing Seals, 45mm (For IB-1000 Series, C and CA Series) Glands (45mm), Brass Packing (For IB-1019, 1032, 1037, C and CA Series) Complete Plunger Seal, 45mm (For IB-1019, 1032, 1037, C and CA Series) Packing Spacer Shim, 45mm (For IB-1000 / Shim) Brass Packing Gland (30mm), (C-Series, 2200 PSI) Complete Plunger Kit (30mm), (C-Series, 2200 PSI) Male Adapter Kit (30mm), (C-Series, 2200 PSI) V-Packing Kit (30mm), (C-Series, 2200 PSI) Page 100 Quantity Needed per Pump 1 1 1 1 1 1 1 1 1 1 3 3 1 1 1 3 3 1 1 1 1 1 1 1 1 1 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 1 1 1 1 1 1 3 1 1 3 1 1

PUMPS & PUMP KITS Legacy HD Pump Repair Kit Selection Chart Use the selection chart below to find the correct repair kits for the specific Legacy HD Pump Model. Seal Kit Pump Model FOG0614R FOG1214R FOG1914R FOG2514R GB3030L GB3030R GB4025L GB4025R GD3025 GD3030 GD4020.1 GE2020F.1 GE2020S.1 GE2825F.1 GE2825S.1 GE3525F.1 GF2030F GF2030S GF2830F GF2830S GF3530F GG2530G.1 GG3030G.1 GG3035G1.1 GG3535G1.1 GG4030G1.1 GH5050 GM3540.2 GM3540.3 GM4030.2 GM4030.3 GM4035.2 GM4035.3 GM5030.2 GM5030.3 GM6035.2 GM6035.3 GP2535G GP3035G GP3035G1 GP3535G1 GP4035G1 GS3040G.2 GS3040G.3 GS3540G.2 GS3540G.3 GS4040G.2 GS4040G.3 GS5030G.2 (qty per pump) - - - - 8.754-856.0 (1) 8.754-856.0 (1) 8.754-856.0 (1) 8.754-856.0 (1) 8.725-356.0 (1) 8.725-354.0 (1) 8.725-356.0 (1) 8.725-354.0 (1) 8.725-356.0 (1) 8.725-354.0 (1) 8.725-356.0 (1) 8.725-354.0 (1) 8.754-860.0 (1) 8.754-856.0 (1) 8.754-860.0 (1) 8.754-856.0 (1) 8.754-860.0 (1) 8.725-354.0 (1) 8.725-354.0 (1) 8.725-354.0 (1) 8.725-354.0 (1) 8.725-354.0 (1) 9.804-492.0 (1) 8.725-358.0 (1) 8.725-358.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-360.0 (1) 8.725-360.0 (1) 8.725-362.0 (1) 8.725-362.0 (1) 8.725-360.0 (1) 8.725-360.0 (1) 8.754-860.0 (1) 8.754-860.0 (1) 8.754-860.0 (1) 8.754-860.0 (1) 8.754-860.0 (1) 8.725-358.0 (1) 8.725-358.0 (1) 8.725-358.0 (1) 8.725-358.0 (1) 8.725-358.0 (1) 8.725-358.0 (1) 8.725-358.0 (1) Complete Seal Kit (qty per pump) 8.754-575.0 (3) 8.754-575.0 (3) 8.754-575.0 (3) 8.754-575.0 (3) 8.754-857.0 (3) 8.754-857.0 (3) 8.754-857.0 (3) 8.754-857.0 (3) 8.725-357.0 (3) 8.725-355.0 (3) 8.725-357.0 (3) 8.725-355.0 (3) 8.725-357.0 (3) 8.725-355.0 (3) 8.725-357.0 (3) 8.725-355.0 (3) 8.754-861.0 (3) 8.754-857.0 (3) 8.754-861.0 (3) 8.754-857.0 (3) 8.754-861.0 (3) 8.725-355.0 (3) 8.725-355.0 (3) 8.725-355.0 (3) 8.725-355.0 (3) 8.725-355.0 (3) 9.804-493.0 (3) 8.725-359.0 (3) 8.725-359.0 (3) 8.725-363.0 (3) 8.725-363.0 (3) 8.725-361.0 (3) 8.725-361.0 (3) 8.725-363.0 (3) 8.725-363.0 (3) 8.725-361.0 (3) 8.725-361.0 (3) 8.754-861.0 (3) 8.754-861.0 (3) 8.754-861.0 (3) 8.754-861.0 (3) 8.754-861.0 (3) 8.725-359.0 (3) 8.725-359.0 (3) 8.725-359.0 (3) 8.725-359.0 (3) 8.725-359.0 (3) 8.725-359.0 (3) 8.725-359.0 (3) Ceramic Plunger Kit (qty per pump) 8.754-576.0 (3) 8.754-576.0 (3) 8.754-576.0 (3) 8.754-576.0 (3) 8.754-858.0 (3) 8.754-858.0 (3) 8.754-858.0 (3) 8.754-858.0 (3) 9.803-935.0 (3) 9.803-934.0 (3) 9.803-935.0 (3) 9.803-934.0 (3) 9.803-935.0 (3) 9.803-934.0 (3) 9.803-935.0 (3) 9.803-934.0 (3) 8.754-862.0 (3) 8.754-858.0 (3) 8.754-862.0 (3) 8.754-858.0 (3) 8.754-862.0 (3) 9.803-934.0 (3) 9.803-934.0 (3) 9.803-934.0 (3) 9.803-934.0 (3) 9.803-934.0 (3) 9.802-629.0 (3) 8.933-023.0 (3) 8.933-023.0 (3) 9.802-620.0 (3) 8.751-238.0 (3) 9.802-629.0 (3) 8.751-237.0 (3) 9.802-620.0 (3) 8.751-238.0 (3) 9.802-629.0 (3) 8.751-237.0 (3) 8.754-862.0 (3) 8.754-862.0 (3) 8.754-862.0 (3) 8.754-862.0 (3) 8.754-862.0 (3) 8.933-023.0 (3) 8.933-023.0 (3) 8.933-023.0 (3) 8.933-023.0 (3) 8.933-023.0 (3) 8.933-023.0 (3) 8.933-023.0 (3) Page 101 Valve Kit (qty per pump) 8.754-577.0 (6) 8.754-577.0 (6) 8.754-577.0 (6) 8.754-577.0 (6) 8.754-859.0 (1) 8.754-859.0 (1) 8.754-859.0 (1) 8.754-859.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 8.754-859.0 (1) 8.754-859.0 (1) 8.754-859.0 (1) 8.754-859.0 (1) 8.754-859.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.803-936.0 (1) 9.802-604.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 8.754-859.0 (1) 8.754-859.0 (1) 8.754-859.0 (1) 8.754-859.0 (1) 8.754-859.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) 9.802-603.0 (1) for Plunger Oil Seal Kit (qty per pump) 8.754-578.0 (1) 8.754-578.0 (1) 8.754-578.0 (1) 8.754-578.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.802-606.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1) 9.802-609.0 (1)

PUMPS & PUMP KITS Pump Model Seal Kit GS5030G.3 GT4540.2L GT4540.2R GT5635.1 GT5636.2L GT5636.2R GT6036.2L GT6036.2R GX1025.1 GX1036.2L GX1036.2R GX1622.2L GX1622.2R GX5450L GX5450R GX8030.1 GX9536.2L GX9536.2R HFR105SL HFR105SR HFR120SL HFR120SR HFR40FL HFR40FR HFR40SL HFR40SR HFR60FL HFR60FR HFR60SL HFR60SR HFR80FL HFR80FR HFR80SL HFR80SR HHP25SL HHP25SR HHP2750R HHP30SL HHP30SR HHP3650L HHP3650R HHP38FL HHP38FR HHP4150L HHP4150R HHP5040L HHP5040R HHP5750L HY1515 HY1520 NMT1520CWR (qty per pump) 8.725-358.0 (1) 8.753-821.0 (1) 8.753-821.0 (1) 8.916-488.0 (1) 8.753-821.0 (1) 8.753-821.0 (1) 8.753-821.0 (1) 8.753-821.0 (1) 8.725-364.0 (1) 8.752-844.0 (1) 8.752-844.0 (1) 8.752-845.0 (1) 8.752-845.0 (1) 8.753-512.0 (1) 8.753-512.0 (1) 8.725-364.0 (1) 8.752-844.0 (1) 8.752-844.0 (1) 8.754-245.0 (1) 8.754-245.0 (1) 8.754-245.0 (1) 8.754-245.0 (1) 8.754-231.0 (1) 8.754-231.0 (1) 8.754-231.0 (1) 8.754-231.0 (1) 8.754-231.0 (1) 8.754-231.0 (1) 8.754-231.0 (1) 8.754-231.0 (1) 8.754-231.0 (1) 8.754-231.0 (1) 8.754-245.0 (1) 8.754-245.0 (1) 8.754-236.0 (1) 8.754-236.0 (1) 8.754-236.0 (1) 8.754-236.0 (1) 8.754-236.0 (1) 8.754-236.0 (1) 8.754-236.0 (1) 8.754-236.0 (1) 8.754-236.0 (1) 8.754-236.0 (1) 8.754-236.0 (1) 8.754-236.0 (1) 8.754-236.0 (1) 8.754-236.0 (1) 8.754-979.0 (1) 8.754-980.0 (1) 8.754-239.0 (1) NMT1520SCWR 8.754-239.0 (1) NMT2120CWR NMT2120ESR 8.754-239.0 (1) 8.754-239.0 (1) Complete Seal Kit (qty per pump) Ceramic Plunger Kit (qty per pump) 8.725-359.0 (3) 8.753-822.0 (3) 8.753-822.0 (3) 8.916-322.0 (3) 8.753-822.0 (3) 8.753-822.0 (3) 8.753-822.0 (3) 8.753-822.0 (3) 8.725-365.0 (3) 8.752-850.0 (3) 8.752-850.0 (3) 8.752-851.0 (3) 8.752-851.0 (3) 8.753-513.0 (3) 8.753-513.0 (3) 8.725-365.0 (3) 8.752-850.0 (3) 8.752-850.0 (3) 8.754-244.0 (3) 8.754-244.0 (3) 8.754-244.0 (3) 8.754-244.0 (3) 8.754-232.0 (3) 8.754-232.0 (3) 8.754-232.0 (3) 8.754-232.0 (3) 8.754-232.0 (3) 8.754-232.0 (3) 8.754-232.0 (3) 8.754-232.0 (3) 8.754-232.0 (3) 8.754-232.0 (3) 8.754-244.0 (3) 8.754-244.0 (3) 8.754-237.0 (3) 8.754-237.0 (3) 8.754-240.0 (3) 8.754-237.0 (3) 8.754-237.0 (3) 8.754-240.0 (3) 8.754-240.0 (3) 8.754-237.0 (3) 8.754-237.0 (3) 8.754-240.0 (3) 8.754-240.0 (3) 8.754-240.0 (3) 8.754-240.0 (3) 8.754-240.0 (3) 8.754-981.0 (3) 8.754-982.0 (3) 8.754-229.0 (3) 8.754-229.0 (3) 8.754-229.0 (3) 8.754-229.0 (3) 8.933-023.0 (3) 8.753-823.0 (3) 8.753-823.0 (3) 9.802-607.0 (3) 8.753-823.0 (3) 8.753-823.0 (3) 8.753-823.0 (3) 8.753-823.0 (3) 9.802-614.0 (3) 8.752-839.0 (3) 8.752-839.0 (3) 8.752-840.0 (3) 8.752-840.0 (3) 8.753-514.0 (3) 8.753-514.0 (3) 9.802-614.0 (3) 8.752-839.0 (3) 8.752-839.0 (3) 8.754-242.0 (3) 8.754-242.0 (3) 8.754-242.0 (3) 8.754-242.0 (3) 8.754-233.0 (3) 8.754-233.0 (3) 8.754-233.0 (3) 8.754-233.0 (3) 8.754-233.0 (3) 8.754-233.0 (3) 8.754-233.0 (3) 8.754-233.0 (3) 8.754-233.0 (3) 8.754-233.0 (3) 8.754-242.0 (3) 8.754-242.0 (3) 8.754-246.0 (1) 8.754-246.0 (1) 8.754-246.0 (1) 8.754-246.0 (1) 8.754-246.0 (1) 8.754-246.0 (1) 8.754-246.0 (1) 8.754-246.0 (1) 8.754-246.0 (1) 8.754-246.0 (1) 8.754-246.0 (1) 8.754-246.0 (1) 8.754-246.0 (1) 8.754-246.0 (1) 8.754-983.0 (1) 8.754-983.0 (1) 8.754-261.0 (1) 8.754-261.0 (1) 8.754-261.0 (1) 8.754-256.0 (1) Page 102 Valve Kit (qty per pump) 9.802-603.0 (1) 8.753-824.0 (1) 8.753-824.0 (1) 9.802-603.0 (1) 8.753-824.0 (1) 8.753-824.0 (1) 8.753-824.0 (1) 8.753-824.0 (1) 9.802-608.0 (1) 8.752-853.0 (1) 8.752-853.0 (1) 8.717-589.0 (1) 8.717-589.0 (1) 8.753-515.0 (1) 8.753-515.0 (1) 9.802-608.0 (1) 8.752-853.0 (1) 8.752-853.0 (1) 8.754-243.0 (1) 8.754-243.0 (1) 8.754-243.0 (1) 8.754-243.0 (1) 8.754-243.0 (1) 8.754-243.0 (1) 8.754-243.0 (1) 8.754-243.0 (1) 8.754-243.0 (1) 8.754-243.0 (1) 8.754-243.0 (1) 8.754-243.0 (1) 8.754-234.0 (1) 8.754-234.0 (1) 8.754-243.0 (1) 8.754-243.0 (1) 8.754-241.0 (1) 8.754-241.0 (1) 8.754-247.0 (1) 8.754-241.0 (1) 8.754-241.0 (1) 8.754-247.0 (1) 8.754-247.0 (1) 8.755-233.0 (1) 8.755-233.0 (1) 8.754-247.0 (1) 8.754-247.0 (1) 8.754-247.0 (1) 8.754-247.0 (1) 8.754-247.0 (1) 8.754-577.0 (1) 8.754-577.0 (1) 8.754-276.0 (6) 8.754-276.0 (6) 8.754-276.0 (6) 8.754-230.0 (6) Plunger Oil Seal Kit (qty per pump) 9.802-609.0 (1) 8.752-835.0 (1) 8.752-835.0 (1) 9.802-606.0 (1) 8.752-835.0 (1) 8.752-835.0 (1) 8.752-835.0 (1) 8.752-835.0 (1) 9.802-606.0 (1) 8.752-835.0 (1) 8.752-835.0 (1) 8.752-835.0 (1) 8.752-835.0 (1) 8.752-835.0 (1) 8.752-835.0 (1) 9.802-606.0 (1) 8.752-835.0 (1) 8.752-835.0 (1) 8.754-235.0 (6) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 8.754-235.0 (1) 9.803-937.0 (1) 9.803-937.0 (1) 8.754-261.0 (1) 8.754-261.0 (1) 8.754-261.0 (1) 8.754-261.0 (1)

PUMPS & PUMP KITS Interpump / General Pumps General Pumps Part No 8.756-267.0, General Pumps 8.756-267.0 8.756-268.0 8.756-270.0 8.756-271.0 8.756-272.0 8.756-273.0 8.756-274.0 8.756-276.0 8.756-277.0 8.756-283.0 8.756-287.0 8.756-288.0 Model No. ET1809E17 ET1509E17 ET1504E34 ET1505E34 ET1507E34 ET1506G6 ET1507G6 EP1810E17 EP1812E17 EP1512E17 ES2012S ES2013S Solid-Shaft Pumps Part No 8.702-629.0, Solid-Shaft Pumps 8.702-635.0 8.702-703.0 8.702-629.0 9.802-358.0 8.702-625.0 8.702-622.0 8.702-636.0 8.702-635.0 8.702-646.0 8.702-645.0 8.702-643.0 8.702-650.0 8.702-649.0 8.702-655.0 8.702-654.0 8.702-665.0 8.702-667.0 8.702-670.0 8.702-697.0 8.702-700.0 8.702-701.0 8.702-702.0 8.702-703.0 8.702-686.0 8.702-687.0 8.702-688.0 8.702-690.0 8.702-693.0 8.702-695.0 8.702-661.0 8.702-630.0 8.702-628.0 8.702-685.0 8.702-663.0 *Duplex Pump GPM 3.2 2.1 1.85 2.1 3.2 2.9 3.2 3.4 4.0 2.9 4.76 5.55 PSI 2320 2610 2610 2610 2610 2610 2610 2500 2500 3045 4000 3600 Shaft RPM 1700 1700 3400 3400 3400 3400 3400 1750 1750 1750 1750 1750 Shaft Size 5/8" 5/8" 5/8" 5/8" 5/8" 3/4" 3/4" 1-1/8" 1-1/8" 1-1/8" 24mm 24mm Old No 102048 102052 102046 102042 102058 102056 102076 102074 102072 102084 102082 102090 102088 102105 102110 102115G 102157 102167 102170 102174 102176 102135 102140 102145 102150 102152 102154 102097 102049 102047 102134 102102 Interpump WS92 W99 W92 WS82 WS101 W101 WS133 WS132 W132 WS151 W151 WS162 W162 W201 WS201 WS202 W972 W979 W995 W996 W997 W912 W913 W916 W921 W928 T5050 – WW93 WW94 WW935 WW944 Model No. GP Model No. TS921 T991 T921 TS821 TS1011 T1011 TS1331 TS1321 T1321 TSS1511s T1511 TS1621 T1621 T2011 TS2011 TS2021 T9721 T9791 T9951 T9961 T9971 T9121 T9131 T9161 T9211 T9281 T5050 TT9111 TT931 TT941 TT9351 TT9441 GPM 4.75 3.5 5.0 5.6 4.0 4.5 3.5 4.75 5.5 4.0 4.5 4.75 5.0 4.5 4.0 5.6 2.1 2.5 3.4 4.0 4.0 4.75 4.0 4.75 4.0 4.0 5.0 3.0 2.9 3.43 3.5 4.4 PSI 1800 1500 1700 1500 2000 2000 2100 2100 2100 3500 2500 2500 2500 3000 3000 3500 1000 1100 1300 1100 2000 1500 1900 2300 2900 4000 5000 1500 1500 1300 2500 2500 RPM 1450 1450 1050 1450 1450 1125 1450 1450 1150 1450 1125 1450 1050 1125 1450 1450 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1845 1750 2800 2800 3400 3400 Shaft Dia 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm Page 103

PUMPS & PUMP KITS Interpump / General Pumps TX Solid-Shaft Pump Part No 8.702-741.0 Old No 102282 Model No. TX1510S34 GPM 4.0 PSI 3000 RPM 3400 Shaft Dia 24MM 8.702-741.0, TX Solid-Shaft Pumps Series “44” (EZ Series) Solid-Shaft Pumps Old No Part No 8.702-766.0 8.702-768.0 8.702-773.0 8.702-782.0 8.702-768.0, Series “44” Solid-Shaft Pumps TSF Part No 8.702-740.0 8.702-736.0 8.702-737.0 8.702-740.0, TSF Pumps Large Frame Solid-Shaft Pumps Old No Part No 8.702-652.0, Large Frame, Solid-Shaft Pumps 8.702-612.0 8.702-640.0 8.702-652.0 8.702-648.0* 8.702-657.0 8.702-672.0 8.702-613.0 8.702-614.0 8.740-164.0 102004 102067 102086 102079 102092 102120 102006 102008 102012 * Double-headed pump Old No 102281 102277 102278 Model No. TSF2021 TSF2221 TSF2421 GPM 7.0 10.2 12.0 PSI 3600 3000 2500 RPM 1450 1750 1750 Shaft Dia 24mm 24mm 24mm 102313 102317 102320 102333 Interpump Model No. W956 W959 W186 – GP Model Model No. GPM EZ2536S EZ2542S EZ3040S EZ4040S34 NOTE: For Direct-Drive Mounting of the above pumps. See flanges on page 115. 3.6 4.2 4.0 4.0 PSI 2500 2500 3000 4000 RPM 1750 1750 3400 3400 Shaft Dia 24mm 24mm 24mm 24mm Interpump Model No. W4A WS104 WS153 WS135 W163 W203 W6 W8 W12 GP Model No. T41A TS1041 TS1531 TS1351 T1631 T2031 T61 T81 T121 GPM / PSI RPM 12.0 / 900 650 8.0 / 1600 1450 8.0 / 2175 1450 11.0 / 2000 1450 10.0 / 2500 1080 9.0 / 3000 1140 17.0 / 1000 650 21.0 / 1000 650 35.0 / 1000 650 Shaft Dia 35mm 35mm 35mm 32mm 32mm 32mm 35mm 35mm 35mm Solid-Shaft Car Wash Pumps Old No Part No 8.702-754.0 8.702-752.0 8.702-745.0 8.702-748.0 8.702-754.0, Solid-Shaft Car Wash Pumps 102295 102293 102286 102289 Model No. CW2040 CW24 CW3040 CW81 GPM 5.0 5.0 5.0 20.0 PSI 2500 2500 3000 1200 RPM 1250 1250 1250 1000 Shaft Dia Ship Wt (lbs) 24mm 24mm 24mm 35mm 30 30 32 92 Page 104

PUMPS & PUMP KITS Interpump / General Pumps Gas Hollow-Shaft Direct-Drive Part No 8.702-711.0 8.702-712.0 8.702-682.0 8.702-673.0 8.702-674.0 8.702-711.0, Gas Hollow-Shaft, Direct-Drive Pumps Hollow-Shaft Direct-Drive — flanged for direct couple to electric motors Old No Part No 8.702-708.0 8.702-710.0 8.702-713.0 8.702-677.0 8.702-679.0 8.702-680.0 8.702-681.0 102202 102204 102210 102125 102126 102127 102129 Interpump Model No. W905E WW906E WW907E GP Model No. T9051E TT9061E TT9071E TT9111EBF TT2021EBF TT2028EBF TT2035EBF Old No 102206 102208 102130 102121 102122 Interpump Model No. WW906G WW907G GP Model No. TT9061G TT9071G TT1540GBF TT2028GBF TT2035GBF GPM / PSI RPM 2.1 / 1400 3400 2.8 / 1500 3400 4.0 / 1500 3400 2.8 / 2000 3400 3.5 / 2000 3400 Shaft Dia 3/4" 3/4" 3/4" 3/4" 3/4" GPM / PSI RPM 2.1 / 1400 1750 2.1 / 1400 3400 2.8 / 1500 3400 3.0 / 1500 1750 2.1 / 2000 3400 2.8 / 2000 3400 3.5 / 2000 3400 Shaft Dia 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 3/4" EZ Series Hollow-Shaft Direct-Drive — flanged for direct couple to gasoline engines Old No Part No 8.702-764.0 8.702-776.0 8.702-778.0 8.702-779.0 102309 102324 102326 102327 Interpump Model No. WW961EZG GP Model No. EZ3040G EZ4030G34 EZ4035G34 EZ4040G34 GPM / PSI RPM 4.0 / 2500 3400 3.0 / 4000 3400 3.5 / 4000 3400 4.0 / 4000 3400 Shaft Dia 1" 1" 1" 1" EZ Series Hollow-Shaft — flanged for direct couple to electric motors Old No Part No 8.702-758.0 8.702-759.0 8.702-761.0 8.702-760.0 8.702-780.0 102301 102303 102305 102304 102330 Interpump Model No. W956EZE W959EZE W950EZE W953EZE - GP Model No. EZ2536E EZ2542E EZ2545E EZ2555E EZ4035E GPM / PSI RPM 3.6/ 2500 1750 4.2 / 2500 1750 4.5 / 2500 3400 5.5 / 2500 3400 3.5 / 4000 3400 Shaft Dia 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" TX Series Hollow-Shaft Direct-Drive — flanged for direct couple to 184TC electric motor Old No Part No 8.702-784.0 8.702-785.0 102335 102336 Model No. TX1810E179 TX1812E179 GPM / PSI RPM 3.2 / 2000 1750 3.8 / 2000 1750 Shaft Dia 1-1/8" 1-1/8" Page 105

PUMPS & PUMP KITS Interpump / General Pump Kit Selection Chart Use this selection chart to find the correct repair kit for the specific Interpump / General Pump model. Pump Model TX1510S34 TX1810E179 TX1812E179 TSF2021 TSF2221 TSF2421 T9721 T9731 T731 T991 T9951 T9971 T921 T1011 T1321 T9211 T9281 T4251 T5050 TS1021 TS1011 TS1041 TS1321 TS1511 TS1531 TS2011 TS2021 TT9111 TT941 TT9441 TT2028 TT2035 TT9061 TT9071 EZ2542E EZ2545E EZ3035G EZ3040G EZ3040S T9051EBF EZ2542S EZ3042S EZ4040S34 EZ3030G34 EZ3045G EZ4035G34 TS1331-B T1631 CW1012 Valves Kit 123 Kit 123 Kit 123 Kit 169 Kit 169 Kit 169 Kit 1 Kit 1 Kit 1 Kit 1 Kit 1 Kit 1 Kit 1 Kit 1 Kit 1 Kit 1 Kit 1 Kit 122 Kit 150 Kit 1 Kit 1 Kit 62 Kit 1 Kit 1 Kit 62 Kit 1 Kit 1 Kit 1 Kit 1 Kit 1 Kit 1 Kit 1 Kit 1 Kit 1 Kit 123 Kit 123 Kit 123 Kit 123 Kit 123 Kit 1 Kit 123 Kit 123 Kit 123 Kit 123 Kit 123 Kit 123 Kit 1 Kit 1 Kit 62 Oil Seal Piston Packings Packing w/Brass Kit 159 Kit 159 Kit 159 Kit 2 Kit 2 Kit 2 Kit 23 Kit 23 Kit 23 Kit 23 Kit 23 Kit 23 Kit 2 Kit 2 Kit 2 Kit 2 Kit 2 Kit 44 Kit 2 Kit 2 Kit 2 Kit 37 Kit 2 Kit 2 Kit 37 Kit 2 Kit 2 Kit 83 Kit 83 Kit 23 Kit 83 Kit 83 Kit 83 Kit 83 Kit 23 Kit 23 Kit 23 Kit 23 Kit 23 Kit 83 Kit 23 Kit 23 Kit 23 Kit 23 Kit 23 Kit 23 Kit 2 Kit 24 Kit 37 Kit 160 Kit 161 Kit 161 Kit 170 Kit 172 Kit 181 Kit 19 Kit 19 Kit 19 Kit 19 Kit 19 Kit 19 Kit 148 Kit 69 Kit 148 Kit 69 Kit 109 Kit 77 Kit 109 Kit 69 Kit 69 Kit 69 Kit 148 Kit 69 Kit 69 Kit 69 Kit 69 Kit 141 Kit 97 Kit 88 Kit 97 Kit 97 Kit 97 Kit 97 Kit 127 Kit 88 Kit 88 Kit 88 Kit 88 Kit 97 Kit 127 Kit 127 Kit 153 Kit 88 Kit 88 Kit 153 Kit 69 Kit 148 Kit 113 Kit 166 Kit 167 Kit 167 Kit 171 Kit 173 Kit 182 Kit 27 Kit 27 Kit 27 Kit 27 Kit 27 Kit 27 Kit 29 Kit 28 Kit 29 Kit 28 Kit 112 Kit 78 Kit 151 Kit 28 Kit 28 Kit 82 Kit 29 Kit 28 Kit 82 Kit 28 Kit 28 Kit 140 Kit 96 Kit 92 Kit 96 Kit 96 Kit 96 Kit 96 Kit 131 Kit 130 Kit 130 Kit 130 Kit 130 Kit 96 Kit 131 Kit 131 Kit 156 Kit 130 Kit 130 Kit 156 Kit 28 Kit 28 Kit 67 Ceramic 104800 104804 104804 083900 107921 107923 104809 104809 104809 104809 104809 104809 104805 104803 104805 104803 104808 104810 104808 104803 104803 104803 104805 104803 104803 104803 104803 104806 083807 104800 083807 083807 083807 083807 104804 104800 104800 104800 104800 104800 104804 104804 104812 104800 104800 104812 104803 104805 104813 Valve Caps Piston Bolts Head Rings Crank Oil Seal Kit 124 – Kit 124 Kit 124 – – – Kit 4 Kit 4 Kit 4 Kit 4 Kit 4 Kit 4 Kit 4 Kit 4 Kit 4 Kit 5 Kit 106 – – Kit 4 Kit 4 Kit 4 Kit 4 Kit 5 Kit 5 Kit 84 Kit 84 Kit 4 Kit 84 Kit 84 Kit 84 Kit 84 Kit 124 Kit 124 Kit 124 Kit 124 Kit 124 Kit 84 Kit 124 Kit 124 Kit 124 Kit 124 Kit 124 Kit 124 Kit 4 Kit 4 – – – – – – Kit 6 Kit 6 Kit 6 Kit 6 Kit 6 Kit 6 Kit 6 Kit 6 Kit 6 Kit 6 Kit 107 – – Kit 6 Kit 6 Kit 54 Kit 6 Kit 6 Kit 54 Kit 6 Kit 6 – – – – – – – – – – – – – – – – – – Kit 6 Kit 6 Kit 74 – – – – – – Kit 21 Kit 21 Kit 21 Kit 21 Kit 21 Kit 21 Kit 11 Kit 7 Kit 11 Kit 7 Kit 108 Kit 7 Kit 108 Kit 7 Kit 7 Kit 7 Kit 11 Kit 7 Kit 7 Kit 7 Kit 7 – – – – – – – Kit 129 Kit 90 Kit 90 Kit 90 Kit 90 – Kit 129 Kit 129 Kit 155 Kit 90 Kit 90 Kit 155 Kit 7 Kit 11 Kit 65 – – – Kit 3 Kit 3 Kit 3 104641 104637 104641 104641 104641 104641 Kit 3 Kit 3 Kit 3 Kit 3 Kit 3 Kit 32 Kit 3 Kit 3 Kit 3 Kit 32 Kit 3 Kit 3 Kit 32 Kit 3 Kit 3 104641 104641 104641 104637 104637 104637 104637 104649 104649 104649 104649 104644 104644 104644 104644 104644 104649 104649 104649 Kit 3 – Kit 32 Page 106

PUMPS & PUMP KITS Genuine Interpump / General Pump Kits We stock a complete selection of original Interpump / General Pump repair kits. See previous page for our kit selection chart. ! Complete selection of repair kits ! See page 112 for our version of these kits for a lower-cost alternative. Part No Old No 8.702-798.0 8.702-800.0 8.702-801.0 8.702-802.0 8.702-803.0 8.702-805.0 8.702-806.0 8.702-116.0 8.702-115.0 8.900-442.0 8.900-444.0 8.702-809.0 8.702-810.0 8.702-811.0 8.702-812.0 8.702-813.0 8.702-814.0 8.702-815.0 8.702-816.0 8.702-817.0 8.702-818.0 8.702-820.0 8.702-821.0 8.702-822.0 8.702-823.0 8.702-824.0 8.702-825.0 8.702-826.0 8.702-829.0 8.702-830.0 8.702-833.0 8.702-834.0 8.702-836.0 8.702-838.0 8.702-840.0 8.702-843.0 103001G 103002B 103003B 103004B 103005B 103006B 103007B 103008B 1-0008 103008LP 103009X 103010B 103011B 103012B 103014B 103015B 103015B 103017B 103018B 103019B 103019NB 103020B 103021B 103022B 103023B 103024B 103026B 103027B 103028NB 103029NB 103032B 103037B 103038NB 103041B 103044B 103050B Kit No. Kit1, Valve Kit2, Piston, Rod Oil Seal Kit3, Crankshaft Oil Seal Kit4, Valve Cap Kit5, Valve Cap Kit6, Piston Bolt Kit7, Head Ring Kit8HP old style, 20mm Packing Kit8, new style Kit8 Old Style, Packing Kit Kit9 Packing Spacer Kit10, Retainer, 20mm Packing Kit11, 22mm Head Ring Kit12, 22mm Packing Kit14, Retainer, 22mm Packing Kit15 Packing Adapter Kit16, 24mm Packing Kit17, 24mm, Intermed. Ring Kit18 Packing Retainer Kit19, 20mm HP Packing Kit19 new style Kit20, 20mm, Intermed. Ring Kit21, 20mm Head Ring Kit22, 20mm, Packing Retainer Kit23, Piston, Rod Oil Seal Kit24, Piston, Rod Oil Seal Kit26, Piston Bolt Kit27, 20mm, Packing Assy Kit28, 20mm, Packing Assy Kit29, 22mm, Packing Assy Kit32, Crankshaft, Oil Seal Kit37, Piston, Rod Oil Seal Kit38, 36mm Packing Kit41, Packing Adapter Kit44, Piston, Rod Oil Seal Kit50, Valve Kit Part No 8.702-844.0 8.702-847.0 8.702-849.0 8.702-850.0 8.702-851.0 8.702-852.0 8.702-853.0 8.702-854.0 8.702-855.0 8.702-856.0 8.702-857.0 8.702-858.0 8.702-859.0 8.702-860.0 8.702-861.0 8.702-864.0 8.900-484.0 8.702-870.0 8.702-872.0 8.702-873.0 8.702-874.0 8.702-875.0 8.702-876.0 8.702-877.0 8.702-878.0 8.702-879.0 8.702-880.0 8.702-882.0 8.702-883.0 8.702-884.0 8.702-885.0 8.702-886.0 8.702-887.0 8.702-888.0 8.702-961.0 Old No 103051B 103058B 103060B 103061B 103062B 103063B 103064B 103065B 103066B 103067B 103069NB 103070B 103071B 103072B 103074B 103077B 103080B 103081B 103083B 103084B 103085B 103086B 103087B 103088NB 103089B 103090B 103091B 103092NB 103093B 103094B 103095B 103096B 103097B 103098B 103220B Kit No. Kit51, Timax Maintenance Kit58, K5 Maint. Kit60, K5, Complete Rebld Kit61, K3, Complete Rebld Kit62, Valve Kit63, 30mm Packing Kit64, Packing with Intermed. Rings Kit65 30MM, Head Ring Kit66, Packing Spacer Kit67, 30mm, Packing Assy Kit69, 20mm, Packing w/Restop Kit70, K7 Maint. Kit71, Intermed. Ring w/Restop Kit72, Maint. Kit Kit74, Piston Bolt Kit77, 20mm, Packing w/Restop Kit80, 45mm, Packing Assy Kit81, Intermed. Ring Kit83, Oil Seal Kit84, Valve Cap Kit85, Complete Packing Kit86, Packing Retainer Kit87, Packing Kit88, Packing, EZ3040G Kit89, Intermed. Ring Kit90, Head Ring Kit91, Packing Retainer Kit92, Piston Seal Kit93, Control Set W2 Kit94, Control Set Kit95, KR Unloader Kit96, Packing Assy Kit97, Packing Kit98, ZKW1 Maint. Kit100, Hot Kit, 190° Water, (Replaces Kits #1 and #28) Page 107

PUMPS & PUMP KITS Genuine Interpump / General Pump Kits, continued We stock a complete selection of original Interpump / General Pump repair kits. See previous page for our kit selection chart. Part No 8.702-893.0 8.702-896.0 8.702-897.0 8.702-898.0 8.702-899.0 8.702-900.0 8.702-901.0 8.702-902.0 8.702-903.0 8.702-904.0 8.702-908.0 8.702-909.0 8.702-910.0 8.702-912.0 8.702-913.0 8.702-914.0 8.702-915.0 8.702-917.0 8.702-919.0 8.702-920.0 8.702-921.0 8.702-923.0 8.702-928.0 8.702-929.0 8.702-930.0 8.702-931.0 8.702-932.0 8.702-933.0 8.702-934.0 Old No 103102B 103105B 103106B 103107B 103108B 103109NB 103110B 103111B 103112B 103113B 103118B 103119B 103120B 103122B 103123B 103124B 103125B 103127B 103129B 103130B 103131B 103134B 103140B 103141B 103148B 103149B 103150B 103151B 103153B Kit No. Kit102, Unloader Maint. Kit105,P10 Maint. Kit106, Valve Cap Kit107, Piston Bolt, Pump T9281 Kit108, Head Ring for T-9281 Kit109, 16 mm, Packing New Kit110, 16mm, Intermed. Ring Kit111, Packing, Retainer, 16mm, Pump T9281 Kit112, 16mm, Packing Assy Kit113, Packing Assy Kit118, Packing Kit119, Packing Kit120, Unloader Kit122, Valves Kit123, Valve, EZ3040 Kit124, Valve Cap and O-Ring for EZ Pump Kit125, EZ Pump Kit127, Packing, EZ2542S Kit129, Head Ring, EZ Series Kit 130 Packing Complete Kit131, EZ Pump Kit134, Valve TH Pump Kit140, Packing, Assembly, T9111 Kit141, General Kit148, 22mm Packing Kit149, Ring, Intermediate Kit150, Valve, General T5050 Kit151, Packing Retainer Kit153, Packing Kit Part No 8.702-936.0 8.702-937.0 8.702-938.0 8.702-939.0 8.702-940.0 9.841-673.0 8.702-941.0 9.841-638.0 8.702-942.0 8.702-943.0 8.702-945.0 8.702-946.0 8.702-947.0 8.702-948.0 8.702-949.0 8.702-952.0 8.702-953.0 8.702-954.0 8.702-955.0 8.702-956.0 8.702-957.0 8.702-958.0 8.702-959.0 8.723-898.0 8.702-960.0 8.723-512.0 8.702-962.0 Old No 103159B 103161B 103162B 103164B 103165B 103166B 103169B 103170B 103171B 103172B 103173B Kit No. Kit156 13mm Packing Kit159 Oil Seal Kit160 Short Packing Kit161 Packings Kit162 Packings Kit163 Seal Retainer Kit164 Int Ring Kit165 Int Ring Kit166 Long Kit1 Kit167 Packing Assy Kit169 Valve Kit Kit170LP Seal Kit and HP Seal Kit171 Packings Kit172 Low/High Packing Kit173 Packings, Kit176 and Kit180 Kit176, 18mm Packing Kit180, 18mm Packing 103181B 103182B Kit181 LP Seal Kit and HP Seal Kit182 Packings, Kit196 and Kit197 Kit196, 15mm HP Packing Kit197, 18mm HP Packing 103201B Kit201 Valve Kit Kit202 Packing Kit Kit203 Seals Kit204 Seals Kit212 Kit226, 15mm packing Page 108

PUMPS & PUMP KITS AR Triplex Ceramic Plunger Pumps Direct-Drive Gas Engine Flanged Models Part No 8.702-585.0 8.702-552.0 8.702-494.0 8.702-501.0 8.702-498.0 8.702-495.0 8.702-546.0 8.702-542.0 8.702-547.0 8.702-585.0 8.702-586.0 8.702-587.0 8.702-588.0 Old No 101804 101701 101718 101711 101702 101796 101792 101797 101865 101866 101867 101868 Solid-Shaft Models Part No 8.702-513.0 8.702-506.0 8.702-507.0 8.715-307.0 8.702-590.0 8.702-593.0 8.702-597.0 8.702-520.0 8.702-513.0 Old No 101731 101734 101780 101870 101873 101877 101765 101750 Model No. XTA3G22N XTA3G19N XMA3.5G25N RKA4G20N RKA4G30N RKA4G40HN XW2128N XW2623 Direct-Drive Electric Flanged Models Part No 8.702-504.0 8.702-504.0 8.702-550.0 8.702-551.0 8.702-508.0 8.702-500.0 8.702-515.0 8.702-514.0 8.702-591.0 8.702-592.0 Old No 101730 101801 101803 101737 101717 101756 101755 101871 101872 Model No. XTA2G15E GPM 2.1 XTV2G15EBA-F8 2.1 XTV3G16E-F8 XTV3G20E-F8 XTV3G22E-F8 XTA3G22E-F8 3.0 3.0 3.0 3.0 XTA3G16EBA-F8 3.0 RKA4G20E-F17 4.0 RKA4G30E-F17 4.0 PSI 1500 1500 1600 2000 2200 2200 1600 2000 3000 RPM 1750 3400 3400 3400 3400 1750 1750 1750 1750 Shaft Dia Weight (lbs) 5/8" 9 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 1-1/8" 1-1/8" 10 10 11 11 11 10 21 21 GPM 3.0 3.0 3.5 4.0 4.0 4.0 5.5 6.87 PSI 2200 1900 2500 2000 3000 4000 4060 3400 RPM 1750 1750 1750 1750 1750 1750 1450 1450 Shaft Dia Weight (lbs) 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 11 11 18 19 19 21 34 34 Model No. XTV3G16D-F7 XTV3G22D-F7 GPM 3.0 3.0 XMV25G26D-F25 2.5 XMV3G30D-F24 3.0 XMV3G25D-F25 3.0 XMV35G25D-F24 3.5 XMV35G25D-F25 3.5 XMV4G30D-F24 3.8 RKV35G30AD-F24 RKV4G30AD-F24 4.0 RKV4G32D-F24 4.0 RKV4G35HD-F24 4.0 PSI 1600 2200 2600 3000 2500 2500 2500 3000 RPM 3400 3400 3400 3400 3400 3400 3400 3400 3.5 3000 3400 3000 3200 3500 3400 3400 3400 Shaft Dia Weight (lbs) 3/4" 3/4" 3/4" 1" 3/4" 1" 3/4" 1" 1" 1" 1" 1" 10 11 19 19 19 19 19 19 21 21 21 21 Page 109

PUMPS & PUMP KITS AR Pump Repair Kit Selection Chart Use the following chart to find AR Repair Kits by pump model number. See next page for AR kit part numbers. We also stock a broad selection of non-kit AR repair parts. Pump Model Water Seals XJV XJW XT-15MM XT-18MM XTA-15MM XTA-18MM XTV XM-15MM XM-18MM XMA-15MM XMA-18MM XMV XRC-18MM XRC-20MM XRCA-18MM XRCA-20MM XRCV RK-18MM RK-20MM RKA-18MM RKA-20MM RKV XW-20MM XW-22MM XWA-20MM XWA-22MM SXW-18MM AR002798 AR002800 AR001866 AR001874 AR001866 AR001874 AR001866 AR002741 AR002747 AR002741 AR002747 AR002741 AR001857 AR001887 AR001857 AR001887 AR001857 AR001857 AR001887 AR001857 AR001887 AR001857 AR002782 AR002783 AR002782 AR002783 AR002874 Check Valves Oil Seals AR001864 AR001864 AR001864 AR001864 AR001864 AR001864 AR001864 AR001864 AR001864 AR001864 AR001864 AR002797 AR002797 AR001872-N ver AR002725-H/D AR001872-N ver AR002726-H/D AR001860-E ver AR001860-E ver AR001860-D, E ver AR001872-N ver AR002786-N ver AR1780100 ea R AR002786-N ver AR1780120 ea R AR002786-N ver AR1780100 ea R AR002786-N ver AR002787-E ver AR1780120 ea R AR001864 AR002786-N ver AR002787-D ver AR1780100 ea R AR001828 AR001828 AR001828 AR001856-E ver AR001828 AR001828 AR002864 AR002864 AR002864 AR002864 AR001828 AR002780 AR002780 AR002780 AR002780 AR002871 AR001855- N ver AR001855- N ver AR001855- N ver AR001855- N ver AR001856-E ver AR001856-D, E ver AR001855-N ver AR001855-N ver AR001855-N ver AR001855-N ver AR001856 AR002781 AR002781 AR002781 AR002781 AR002873 Piston Kit AR002796 AR002796 AR002628 AR002629 AR002628 AR002629 AR002628 AR002725-H/D AR002544 AR002545 AR002544 AR002545 AR002544 AR002546 AR002547 AR002546 AR002547 AR002546 AR002546 AR002547 AR002546 AR002547 AR002546 AR002650 AR001891 AR002650 AR001891 AR002548 Piston Guide AR1980180 ea AR1980180 ea AR1260151 ea AR1260450 ea AR1260151 ea AR1260450 ea AR1260151 ea AR1780090 ea F AR1780110 ea F AR1780090 ea F AR1780110 ea F AR1780090 ea F AR1380090 ea AR1380150 ea AR1380090 ea AR1380150 ea AR1380090 ea AR1380090 ea AR1380150 ea AR1380090 ea AR1380150 ea AR1380090 ea AR002784 AR002785 AR002784 AR002785 AR002875 Support Rings AR1980190 ea AR1980190 ea AR1520120 ea AR1320340 ea AR1520120 ea AR1320340 ea AR1520120 ea AR002740 AR002745 AR002740 AR002745 AR002740 AR001829 AR001815 AR001829 AR001815 AR001829 AR001829 AR001815 AR001829 AR001815 AR001829 - - - - - Hot Kit - - AR002029-V AR002030-V AR002029-V AR002030-V AR002029-V AR002776 AR002777 AR002776 AR002777 AR002776 AR002809 AR002810 AR002809 AR002810 AR002809 AR002809 AR002810 AR002809 AR002810 AR002809 AR002778 AR002779 AR002778 AR002779 - Page 110

PUMPS & PUMP KITS AR Pump Kits Original factory-direct repair kits. See previous page for kit selection chart. Don’t see what you’re looking for? Give us a call. We stock a broad selection of AR replacement parts. AR piston kits contain all that you need to repair broken pistons, O-rings, washers, nuts, plungers…YOU GET IT ALL! Part No 8.720-573.0 8.720-574.0 8.740-118.0 8.720-575.0 8.720-578.0 8.720-579.0 8.720-581.0 8.720-582.0 8.720-583.0 8.720-585.0 8.720-586.0 8.720-592.0 8.720-593.0 8.720-594.0 8.720-596.0 8.720-597.0 8.720-598.0 8.720-599.0 8.720-601.0 8.720-602.0 8.720-603.0 8.720-604.0 *Series Old No AR001804 AR001805 AR001806 AR001815 AR001825 AR001826 AR001828 AR001829 AR001830 AR001842 AR001843 AR001855 AR001856 AR001857 AR001860 AR001864 AR001865 AR001866 AR001869 AR001872 AR001873 AR001874 Kit Description Packing Packing, 20mm Pump Piston Valve Kit Piston Bolt Valve Ring, Support, XRA / XRV* Repair, AR 2882, O-Rings Only Piston, XRA / XRV* Piston, XRA, XR Oil Seal, XRA* Oil Seal, XRV Packing, XRA / XRV* Seal, Oil, XTV* Valve Kit Oil Seal Water Seals Repair Unloader Oil Seal Oil Seal Kit Cmplt Packing Part No 8.720-606.0 8.720-611.0 8.720-612.0 8.720-613.0 8.720-632.0 8.720-633.0 8.720-643.0 8.720-644.0 8.720-649.0 8.720-651.0 8.720-652.0 8.720-655.0 8.720-658.0 8.720-661.0 8.720-662.0 8.720-663.0 8.720-665.0 8.720-667.0 8.720-668.0 8.720-684.0 *Series Old No AR001887 AR002031 AR002043 AR002044 AR002544 AR002546 AR002624 AR002628 AR002697 AR002740 AR002741 AR002747 AR002776 AR002780 AR002781 AR002782 AR002784 AR002786 AR002787 AR002864 Kit Description Water Seals Viton Seal, XRA Oil Seal Seal Piston, XM* Piston XRCA / XRCV Seal AR Piston #2628 Repair, Combi-Set Support Ring, XM* Water Seal, XM* Packing, XMA* 18MM Hot / Dry Cup Valve, XWA8G30N-SX Seal, XWA8G30N-SX Piston Seal, XWA8G30N-SX Piston Guide, XWA8G30N-SX Oil Seals, XMA35G25N Oil Seals Valve Kit, RK* Comet Pumps and Pump Kits For use in homeowner or light commercial-duty pressure washer. ! One-piece bronze connection rods ! Built-in unloader Part No 9.802-357.0 8.702-576.0 8.715-286.0 8.750-238.0 Old No 5-2107 101850 830160 Model No. AXD 2020 E AXD 3020 G AXD 2427 G BXD 2020 E GPM 1.9 2.75 2.5 1.9 ! Increased surface area for lower operating temperatures ! Ultra high-pressure head PSI 2000 2000 2700 2000 RPM 3400 3400 3400 3400 Shaft Dia 5/8" (Hollow) 3/4" (Shaft) (Belt Drive) 3/4" (Hollow) 5/8" (Hollow) Comet kits and parts are available for any Comet model. Call with model number for quick and accurate service. Old No Part No 8.721-902.0 8.721-903.0 8.718-556.0 8.721-979.0 8.721-985.0 8.721-986.0 8.721-987.0 8.721-989.0 8.721-988.0 8.750-711.0 8.721-996.0 8.721-997.0 8.725-562.0 CT0202002000 CT0202002200 CT5019003500 CT5019003800 CT5019004500 CT5019006400 CT5019006500 CT5019007800 CT5019007700 CT5025001100 CT5025001400 Model No. Piston 15MM FWD Piston 18MM FWD Seal Kit LWD HP Packing Kit FWS / FWD Seal Kit Oil LW Series Hollow Seal Kit ZWD4030G Seal Kit Hollow Shaft Pumps Seal Kit AXD2020 Seal Kit AXD3020 Seal Kit BXD2020 E Valve Kit ZWD / FWS / FWD / HW / FW / LW Valve Kit AXD 3020 Valve Kit BXD2020 Page 111

PUMPS & PUMP KITS Ceramic Plungers Precision-ground, high-polish, solid ceramic plungers, designed for long life even under constant use. Piston Pumps ! Cast-iron body ! Stainless-steel check valves ! Complete with base or torque arm ! Buna cups ! 140° max temperature except 5321 ! 180° max temperature 5321 ! 1/2 NPT ports Part No 8.703-185.0 8.703-187.0 8.703-188.0 8.703-190.0 8.703-191.0 8.703-192.0 8.900-575.0 8.703-193.0 8.703-194.0 8.703-195.0 8.703-196.0 8.703-197.0 8.703-198.0 8.703-199.0 8.703-200.0 8.703-767.0 8.703-768.0 8.701-400.0 Old No 104798 104800 104801 104803 104804 104805 104806 104807 104808 104809 104810 104811 104812 104813 104815 107921 107923 General Pump Part No 51040109 52040009 46040009 47040409 44040109 47040509 51040166 47040609 47040856 50040409 61040056 69040009 44040266 69040109 76040209 66040109 66040409 Size 18mm 15mm, EZ Series For W50 Pump 20mm 18mm, EZ Series 22mm 18mm, TP Series 24mm Solid, Ceramic 16mm, 47 Series 20mm, T Series 49 20mm, 76 & 77 Series 36mm 13mm, EZ Series 30mm 45mm 22mm, TSF2221 24mm 15mm, T21 Packing and Seal Kits UPC, General Pump and Interpump replacement kits. Time-tested, quality parts meet or exceed factory specifications. Pump Parts and Tools For 5300 series pump. Valve Seat Tools Piston Repair Kit ! A necessity for working on 5300 series pumps ! Rugged construction Part No Part No 8.900-438.0 8.900-440.0 8.900-441.0 8.900-442.0 8.900-443.0* 8.900-444.0* 8.900-447.0* 8.900-456.0* 8.900-463.0 8.900-464.0 8.900-466.0* 8.900-468.0* 8.900-471.0* 8.900-476.0 8.900-485.0 8.900-488.0 8.900-492.0 Old No 103001X 103002X 103003X 103008LPX 103008X 103009X 103012X 103019X 103023X 103024X 103027X 103028X 103029X 103037X 103083X 103087X 103097X Description Kit 1, Check Valve Kit 2, Oil Seal Kit 3, Crankshaft Oil Seal Kit 8, New Style packing Kit Kit 8, V-Packing Kit 9, Intermed Packing Kit 12, V-Packing Kit 19, V-Packing Kit 23, Crankcase Oil Seal Kit 24, Crankcase Oil Seal Kit 27, Plunger Repair Kit 28, Plunger Repair Kit 29, Plunger Repair Kit 37, Oil Seal Kit 83, Oil Seal Kit 87, V-Packing Kit 97, Packing *These are old style kits to replace components in Interpump / General pumps with two brown Buna-V packings (pumps built before the change was made to restop ring and black low-pressure seals.) 8.722-629.0 8.722-634.0 8.722-641.0 8.712-510.0 8.712-512.0 Old No H34300010 H34300144 H34300197 449052 449071 NOTE: Piston Repair Kits have Buna seal Jetter Pulse Valves Replaces valve cap to create pulsation action, to move nozzle in pipe cleaning applications. Part No 8.755-228.0 8.755-229.0 8.755-230.0 8.755-231.0 8.755-232.0 8.712-249.0 8.712-250.0 Page 112 Old No Description For Legacy GB/GF/GP Series For Legacy GM Series / GS Series For Legacy GT Series 410317 410318 For Legacy GX Series, 4350 PSI For Legacy GX Series, 3000 PSI For GP 47 Series Pumps For GP TT Pumps Description Piston Repair Kit (Model 5320 pump) Piston Repair Kit (Model 5321 pump) Check Valve Kit (All 5300 Pumps) Valve Cage Tool Valve Seat Tool Valve Cage Tools Part No Solid Shaft 8.702-155.0 8.702-158.0 8.702-161.0 8.702-163.0 8.702-167.0 Hollow Shaft 8.702-156.0 8.702-157.0* 8.702-159.0 8.702-160.0 8.702-162.0 8.702-164.0 8.702-166.0 8.702-146.0 8.702-152.0 *Has Teflon seals Old No 100314 100319 100322 100325 100331 100315 100316 100320 100321 100324 100326 100330 100301 100306 Hypro 5315 5320 5321 5324 5330 5315 5315 5320 5321 5324 5325 5330 GPM 1.5 2.0 2.2 2.9 3.0 1.5 1.5 2.0 2.2 2.9 2.5 3.0 PSI 500 500 1000 800 500 500 500 500 1000 800 500 500 Injector Head 5320 / 5330 Pump Injector Head 5321 / 5324 Pump RPM 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 8.702-156.0

PUMPS & PUMP KITS Accumulator by Interpump Pulse dampener. ! 3/4" MPT connector ! 1350 PSI max pressure ! 10 GPM max flow !Weight 1 lb Part No 8.711-148.0 Old No 381110 Description Accumulator Part No 8.712-522.0 Accumulator – Pulse Dampener ! 180°F max temperature ! Precharge pressure 580 PSI 8.711-145.0 Part No 8.711-145.0 8.711-146.0 8.711-147.0 Old No 381102 381103 381104 Working PSI 3100 3100 4400 Packing Extractor Virtually unbreakable sockets will pull packings from Interpump, General and other brand pumps. Easy to use: Slide-Hammer (shown below) attaches to slotted socket–which ex pands inside the packing gland. The slide ham mer then pops the packing gland brass out of the head to facilitate easy seal repairs without damage to brass support rings. Capacity 21.4 CU" 6.1 CU" 2.5 CU" 8.711-147.0 Inlet 1/2"F 3/8"F 3/8"F Old No 449310 8.712-528.0 8.712-529.0 8.712-530.0 449315 449320 449322 449324 Description Extractor (only) Expansion Sockets for Extractor Above 8.712-526.0 15mm (Ref Kit 86 and 97) 20mm (Ref Kit 8 and 19) 22mm (Ref Kit 12) 24mm (Ref Kit 16) NOTE: 15mm Expansion Sockets also fit Admiral Pump W-Series pumps. O-Ring Tool Indispensable for Pump Re pair. Excellent for removing O-rings, seals, etc. ! 6" long dental pick ! Stainless-steel Part No 8.707-467.0 9.802-568.0 Pump Oil Quality mineral base lubricating oil ideal for use in high pressure piston precision plunger pumps. Blended with wear, rust, and foam inhibitors. Part No Slide Hammer 8.712-513.0 Old No 449299 Sockets for Regular Slide Hammer 8.712-516.0 8.712-515.0 8.712-517.0 8.712-518.0 8.712-520.0 449302 449301 449303 449304 449307 Large Slide Hammer 8.712-521.0 449309 Sockets for Large Slide Hammer 8.712-523.0 8.712-524.0 8.712-525.0 449311 449312 449313 Description Hammer Only 18mm Socket 15mm Socket 20mm Socket 22mm Socket 25mm Socket Large Slide Hammer 30mm Socket 38mm Socket 45mm Socket V-Packing Insertion Tool Kit Contains inserting tools for installing 20mm, 22mm and 24mm V-packings in the packing gland. Prevents damaged sealing surfaces. Part No 8.712-519.0 Old No 449305 Description V-Packing Kit Part No 8.923-425.0 Description Pump Oil 10W40 (quart) Pump Lube ! A premium-quality lubricating oil fortified with additives to reduce friction, foaming and corrosion ! Ideal fo ruse in heavy industrial applications requiring hydraulic based lubricant Part No 8.756-854.0 9.808-016.0 Old No 112056 112076 Description Pump Lube (quart) Case Lot (qty 12) General Pump GL5 80w-90 Gear Lube General Pump gear lube is a multi-viscosity SAE 80W 90 lubricant with anti-friction, anti-foaming and cor rosion-inhibitor additives. Use in Ad mi ral Geared Speed Reducers and Interpump / Gen er al RS99, RS151, PTO as well as other high-speed gear boxes. Part No Description 8.756-728.0 Page 113 Gear lube (2-1/2 gallons) Old No 249737 959260 ! Knurled handle ! Double-end Description Dental Pick Pliers, Seal Extractor Interpump Packing Extractor Tool Expansion tool inserts into packing gland to remove lodged packing components.

PUMPS & PUMP KITS Complete Pump Extraction Kit ! 13mm, 15mm, 18mm, 20mm, 22mm and 24mm sockets ! 13mm-24mm in a carrying case ! Slide hammer Part No 8.723-619.0 Description Extraction Kit Geared Reduction Specifically designed for Legacy and Admiral pumps. ! Engine-to-pump drive units ! 2.1 to 1 reduction ratio (3,675 Eng. RPM=1,750 Pump RPM) ! Engine shaft size = 0.984" or 1" or 1-1/8" Geared Reduction Units Interpump / General For use with 1,450 RPM Interpump, General Pumps and Admiral A-W99. RS99: 2.4:1 Gear Reduction (3,480 engine RP M = 1,450 RPM Pump) For 3-5 HP Briggs, Honda-Tecumseh-Kohler with 3/4" shaft RS151: 2.2:1 Gear Reduction (3,190 engine RPM = 1,450 RPM pump) For 7-18 HP Briggs, Honda engines with 1" or 1-1/8" shaft (must specify) Use with the appropriate size: “WS” series Interpump, “TS” series General pump ! Eliminates belts, pulleys and belt guards ! Engine-to-pump drive units ! Improve efficiency Part No RS-99 Part No 8.710-332.0 8.710-333.0 8.710-334.0 8.715.344.0 8.715-342.0 8.749-925.0 8.749-922.0 8.749-923.0 8.749-336.0 8.754-767.0 Old No 349120 349121 349122 Description 24mm Pump x 1" Engine 30mm Pump x 1" Engine 30mm Pump x 1-1/8" Engine 25mm Pump x 1" Engine 24mm Pump x 1" Engine 24mm Pump x 0.984" Engine 24mm Pump x 3/4" Engine 24mm Pump x 1" Engine 24mm Pump x 1-1/8" Engine 25mm Pump x 1-1/8" Engine Geared Reduction Fits Admiral, Interpump, AR, Comet, Udor, and Hawk. ! Engine-to-pump drive units ! 2.18 to 1 reducer ! For 11-18 HP gasoline engine ! For pumps with a 24mm shaft Part No 8.710-335.0 8.710-336.0 Old No 349130 349131 Description 1" Engine Shaft 1-1/8" Engine Shaft ! 2 GPM max Anti-Seize Compound Recommended for all metal-to-metal, power-drive assemblies. Facilitates removal after use. ! Copper-graphite or nickel ! Copper-graphite high-torque for high temperature to 1800°F ! Nickel continues to work up to 2400°F ! Stops rust, galling and seizure on pulley / shaft or gear / shaft interfaces Part No 8.704-638.0 8.704-641.0 Old No 112299 112305 Description Blister Pack (1 appl) Copper – Graphite 8 oz Brush Top Can – Nickel Page 114 Part No 8.715-240.0 8.707-369.0 8.707-370.0 8.700-187.0 Old No 830065 753170 753168 753169 ! 1000 PSI max Description Pump-Sport 500 Crankshaft Seal Kit w/ plunger Check Valve Kit 8.710-321.0 RS-151 8.710-322.0 8.710-324.0 Old No 349009 349011 349013 Engine Shaft 3/4" 1" 1-1/8" 8.710-322.0 PTO Geared Multiplier ! 1 to 1.9 speed multiplier ! 1-3/8" splined shaft (same shaft as standard tractor PTO) ! 540 RPM PTO speed multiplied to 1,026 RPM at pump shaft ! For pumps with a 24mm shaft Part No 8.710-319.0 Old No 349005 Pumptech Pump The Pumptech Pump is a Twin plunger design Originally used on the HOTSY Model Sport 500. 8.710-321.0 Description Gear Multiplier

PUMPS & PUMP KITS Flanges Direct attachment of Legacy Pumps to NEMA Standard C-Face Motors. Part No 8.754-098.0 8.754-099.0 NEMA Frame Pump Series 184 TC / 215 TC GM 184 TC / 215 TC GT-GX Flanges Direct attachment of Interpump / General Pumps to NEMA Standard C-Face Motors. Part No 8.709-613.0 8.709-615.0 8.709-616.0 8.709-870.0 Flex Couplers Pump shaft cou plers. Direct-drive self-adjusting resilient coupling Legacy pumps to NEMA Standard Motor Shafts. 2-Piece Coupler Part No 8.754-100.0 8.754-101.0 8.754-102.0 8.754-103.0 NEMA-C Frame Pump Series Motor Drive Coupling 184 TC 215 TC 184 TC 215 TC GM GM GT-GX GT-GX 1-1/8" x 24 mm 1-3/8" x 24 mm 1-1/8" x 25 mm 1-3/8" x 25 mm Flex Couplers 24mm pump shaft cou plers. Direct-drive flex coupling 24mm Interpump / General and Admiral XLS Series pumps to NEMA Standard Motor Shafts. Part No 2-Piece Coupler 8.709-617.0 8.709-619.0 8.709-621.0 8.709-624.0 8.709-869.0 8.701-262.0 Old No 336028 336030 336032 336036 339112A 080320 Old No 336020 336024 336025 339120 *W995 / GD **W913 / GM NEMA Frame Pump Frame Size 56 / 145TC 184TC* 215TC** 8-13 HP(G) W973 W995 W913 WW161 2-Piece Coupler NEMA Frame Drive Shaft 56 A 145 T 184 T 215 T 5/8" 7/8" 1-1/8" 1-3/8" Gas (Aluminum) 1" Rubber Bumper – Replacement Pump Technical Information Correct pump installation is essential for optimum performance. It is recommended that the pump flow capacity be oversized for the actual flow required. For optimum running of the system, the water circulated through the regulating valve should not exceed 10-15% of the pump flow. Recirculating too much water can generate heat in the supply tank increasing the cavitation risk. Frequently Asked Questions: Question: How much should you reduce the pump RPM to achieve a lower flow capacity? Question: What diameter of pulley must I use to achieve the correct pump RPM? Question: What if I cannot change the engine / motor pulley? Question: If the engine / motor is running at a lower RPM than the maximum pump RPM allowed, what will be the pump flow capacity? Question: What is the approximate power required to achieve the maximum performances allowed? Answer: Required RPM = Expected Capacity x Answer: Exter-l Diameter of the Engine Motor Pulley Max RPM Allowed Max Allowed Capacity = External Diameter of the Pump Pulley x Answer: External Diameter of the Pump Pulley = External Diameter Engine Motor Pulley Answer: Attainable Maximum Capacity = Engine / Motor RPM x x Pump RPM Engine / Motor RPM Engine / Motor RPM Pump RPM max capacity indicated on the label max RPM indicated on the label Answer: Required Electric Motor HP = Electric Motor HP Required Gas Engine HP PSI x GPM 1460 PSI x GPM 1460 x 1.30 = Gas Engine HP Conditions to prevent pump cavitation: Minimum difference in height HZ (pos / neg) between pump and water level. The minimum inlet pressure value of the pump is limited by the cavitation phenomenon. Cavitation is the forming of vapor bubbles when the local pressure is below the vapor pressure of the liquid. Bubbles flow together with the liquid and when they reach a higher pressure area, they collide, generating abnormal stresses that are extremely dangerous to the pump components. To avoid the risk of cavitation, it is necessary that the pump installation is correct. Page 115

UNLOADERS, INJECTORS, VALVES & GUAGES Legacy Universal Unloader (UU1) The Legacy Universal Unloader is unique in that it allows for height or width adjustments making it ideal for any pump. ! 3/8" NPT outlet ! 6 GPM ! 3500 PSI ! 195°F ! Forged-brass body ! 1/2" NPT inlet Part No 9.175-018.0 Description Legacy Universal Unloader (UU1) PLEASE NOTE: Legacy Universal Unloader (UU1) will not fit Legacy Pump GF 3530F ! Stainless-steel seat and low-friction, wear-resistant plunger ! 16.1 oz weight ! Patent US 8,313,311 B2 Minimum Adjustment: 0.177 2.635 2.126 2.595 Maximum Adjustment: 1.043 2.635 2.598 3.461 VBT Unloader A trapped pressure direct mount unloader valve. Part No ! 6.6 GPM ! 1500 - 4000 PSI ! 1/2" FPT inlet, 3/8" MPT outlet ! 195°F ! Brass, Stainless, Buna-N ! 1.95 lbs weight 8.754-696.0 8.754-700.0 8.754-701.0 8.754-702.0 8.754-703.0 Description PSI Unloader, VBT Direct Mount Unloader, VBT Direct Mount Unloader, VBT Direct Mount Unloader, VBT Direct Mount Unloader, VBT Direct Mount Fits Pump 3000 4000 4000 4000 1500 LB, LP, LF LB, LP, LF LB, LP, LF LM, LS FOG Page 116

UNLOADERS, INJECTORS, VALVES & GUAGES Automatic Pressure Regulator Integral Regulator for Admiral Pumps: WE - WG - WEL - XLS - XLE - XLG bolt on for Admiral and Legacy Pumps. Trapped-pressure regulator specifically designed for use on the Ad mi ral plunger pumps. Integral inlet, bypass and outlet eliminates the need for bypass hose. ! 6 GPM ! 3200 PSI ! 195°F ! Forged-brass body ! 3/8" MPT outlet ! Stainless-steel plunger and seat valve ! 29 oz weight Part No 8.703-401.0 9.802-365.0 8.900-760.0 8.900-761.0 8.900-762.0 Old No 106020 106022 109139 109139X 109140 Description APR-Brass / Black APR-Brass / Black Seal Repair Kit – Seal Repair Kit – Valve Seat Repair Kit Regulator / Unloader VRS3 ! 8 GPM ! 3630 PSI ! 194°F ! 3/8" MPT inlet and outlet, 1/4" FPT bypass ! Adjustable pressure setting nut ! Heavy-duty forged-brass body ! Stainless-steel ball and valve seat ! High-temperature Viton seals ! Adjustable upper-pressure limit lock Part No 8.753-027.0 8.753-026.0 8.703-401.0 Inlet 3/8" 1/2" 3/8" 1/2" VBA35 / VB55 Unloader Valves for Legacy HD Pumps ! 6.6 GPM ! 3500 PSI Part No VBA35 for Legacy HD models 9.803-899.0 Regulators / Unloaders Basic valves, premium performance. ! Forged-brass body ! Stainless-steel seat and piston ! 3/8" MPT inlet, outlet and bypass ! 194°F 520 Regulator / Unloader ! Rated @ 2000 PSI ! 13 oz weight VR54 Black Regulator / Unloader ! Rated @ 2175 PSI ! 15 oz weight VR54 Red Regulator / Unloader ! Rated @ 2900 PSI ! 13.7 oz weight VR56 Regulator / Unloader ! Rated @ 3625 PSI ! 15 oz weight ! For use with 520 regulator / unloaders Repair Kits Part No 8.712-589.0 8.704-003.0 8.704-004.0 8.753-028.0 8.753-029.0 8.753-017.0 Old No 462320K 109177 109178 Description 520 w/ Knob Seal Repair Kit Valve Seat Repair Kit VR54 Black VR54 Red VR56 w/ Knob ! Tested up to 3400 PSI ! 8 GPM ! Tested up to 2800 PSI ! 8 GPM Part No 8.750-297.0 8.750-298.0 8.750-299.0 8.750-300.0 8.750-955.0 8.750-956.0 8.750-709.0 8.750-710.0 9.802-694.0 Description 2320 PSI Yellow 3630 PSI Blue 4500 PSI Black 4500 PSI w/ EZ Start Black 4500 PSI w/ Switch, w/o Knob 4500 PSI w/ Switch, w/ Knob Repair Kit, VRT3, 2320/3630 PSI Repair Kit, VRT3, 4500 PSI Repair Kit Old Style VRT 605,606,607 ! Tested up to 2800 PSI ! 8 GPM ! Tested up to 2400 PSI ! 8 GPM ! Forged-brass body ! Stainless internals ! Up to 4500 PSI ! 200°F ! 8 GPM ! 3/8" in-out / bypass 9.803-900.0 ! 8 GPM Part No ! 3650 PSI Description VB55 for Legacy HD models 9.802-363.0 GM, GS Description GG, GD, GE GM, GS Description w/o Knob w/ Knob VRT3 Unloader Valves Page 117

UNLOADERS, INJECTORS, VALVES & GUAGES VRT100 Unloader Valves ! Forged-brass body ! Stainless internals ! Up to 5075 PSI ! 194°F ! 26.4 GPM ! 1/2" in-out / bypass Part No 8.753-726.0 8.753-443.0 8.753-444.0 8.753-727.0 8.754-012.0 Description 5075 PSI Blue 2760 PSI Yellow 5075 PSI Blue 5075 PSI Blue Microswitch 120/240VAC VRT100 Repair Kit VB130 Regulator / Unloader Fits CAT 2SF pumps and other pumps; 6.6 GPM – 2600 PSI max pressure. ! Rated pressure: 2300 PSI ! 200°F ! 3/8" MPT inlet and outlet ! 3/8" FPT bypass ! Stainless-steel plunger ! Stainless-steel valve seat ! 14.7 oz weight Part No 8.712-739.0 8.904-579.0 9.802-006.0 8.712-735.0 Pulsar Unloaders ! Pulsar 4 blue rated 3200 PSI – Max 3650 PSI ! Pulsar 4 white rated 1400 PSI – Max 1750 PSI ! Pulsar 280 HP rated 4050 PSI – Max 4350 PSI ! 195°F ! 8 GPM ! All stainless-steel valves ! Pressure actuated ! Forged body ! 3/8" FPT inlet, outlet ! Two 3/8" FPT bypass ports Part No 8.712-653.0 8.704-462.0 9.802-004.0 8.754-866.0 8.752-788.0 Original No. 462654 111100 111375 Description Pulsar 4 (White) w/ Knob Repair Kit – Pulsar 4 Repair Kit – 280 HP Pulsar 4 RV / no knob Pulsar 4 Blue Spring w/knob & switch VB7 Regulator / Unloader Fits CAT 4SF pumps and other pumps; 7.8 GPM – 3600 PSI max pressure. ! Rated pressure: 3200 PSI ! 200°F ! 3/8" MPT inlet,1/4" FPT gauge port ! 3/8" FPT outlet and bypass ! 19.7 oz weight Part No 8.712-741.0 8.904-580.0 8.704-488.0 8.712-735.0 Old No 463670 463670K 111175 463600 Description w/o Knob w/ Knob Repair Kit Knob Only VB200 / 150 High-Volume Unloader ! 52.5 GPM ! Forged-bronze body ! Large plastic knob (removable) ! Lock nut on pressure adjustment ! 2175 PSI ! 194°F ! 1" FPT Inlet, outlet and bypass ! Two 5/16" – 18 bolt mounting ports ! 73.5 oz weight Part No 8.712-754.0 8.712-755.0 8.704-583.0 Old No 463714 463715 111550 Description VB 200/150 w/o Knob VB 200/150 w/ Knob Repair Kit Part No 8.751-964.0 8.751-963.0 Description VB85/280 – Blue Spr VB85/280 – Blue Spr VB85 / 820 Regulator / Unloader ! VB85 rated @ 4050 PSI ! 200°F ! Pressure actuated ! Forged-brass body ! Stainless-steel plunger and seat ! 1/2" FPT in/out bypass ! 45 oz weight Old No 463660 463660K 111150 463600 Description w/o Knob w/ Knob Repair Kit Knob Only Page 118

UNLOADERS, INJECTORS, VALVES & GUAGES VB75 / VB135 The VB75 is an integrated unloader for Interpump and General pumps with 7.8 GPM – 3600 PSI max pressure. The VB135 fits Interpump “WW” Series Pumps and General “TT” Series Pumps with 6.5 GPM – 2600 PSI max pressure. VB75 ! Rated pressure: 3200 PSI ! 200°F ! 1/2" MPT inlet, 1/4" FPT gauge port ! 3/8" FPT outlet and bypass ! 19.7 oz weight VB75 VB135 ! Rated pressure: 2300 PSI ! 200°F ! 3/8" MPT inlet, 1/4" FPT outlet ! Stainless internals ! Forged-brass body ! 22.9 oz weight VB135 Part No VB75 8.712-742.0 8.704-488.0 8.712-735.0 8.705-934.0 VB135 8.712-659.0 8.712-735.0 9.802-006.0 8.705-935.0 Old No Description 463672/462646 Series 44 (EZ) and 47 pumps (W151) 111175 463600 Seal Kit Knob Only 1/2" Bolt w/ Hole 462659 463600 111150 VB 135 Knob Only VB 135 Repair Kit 3/8" Bolt w/ Hole VB350 / 4 Unloader Bigger. Stronger. Faster – 5600 PSI VB80 / 400 Stainless-Steel Unloader ! 21 GPM ! Rated 5800 PSI ! Forged stainless-steel body ! 195°F ! All stainless-steel valve parts ! Viton seals ! 1/2" FPT inlet, outlet and bypass ! 10.5 GPM ! Rated 5100 PSI ! Max 5600 PSI ! 195°F max ! Forged-bronze body ! 31 oz weight ! Stainless-steel plunger and valve seat ! 3/8" FPT outlet and bypass ! 1/2" F bypass ! 3/8" MPT inlet, 1/4" gauge port Part No 9.802-360.0 8.704-499.0 9.800-106.0 Part No 8.712-656.0 9.802-007.0 Old No 462656 111340 Description VB 80/400 Repair Kit Old No 463680K 111200X 111901 Description Unloader Red Knob Repair Kit Old VB 350 Repair Kit – Red Knob Version Part No 8.712-736.0 8.715-462.0 8.715-489.0 8.712-745.0 8.704-548.0 8.704-561.0 8.901-056.0 Old No 463650 Description VB9 w/ Knob VB9 w/ Knob and Pressure Switch 463675 111336 111400 111401 VB9 w/ Check Valve and Pressure Switch VB10 w/ Knob Repair Kit VB9 Repair Kit VB10 Seal Kit VB10 Trapped Pressure Unloader Valves VB10 / VB9 ! 7.8 GPM – 3600 PSI ! Rated 3200 PSI ! 194°F ! Instant pressure response ! Hex-shaped non-stick check valve ! 3/8" in/out bypass ! Brass valve body/stainless ball and seat ! Knob included ! VB9 – Panel mountable ! Reduces trapped pressure to 25% of operating pressure when unloading; allows easier gun trigger pull Page 119

UNLOADERS, INJECTORS, VALVES & GUAGES Control Set “W” Series / Integrated Regulator/Unloader Designed exclusively to fit Interpump and General pumps. ! Mounts directly on pump inlet and outlet; internal bypass loop ! Pressure actuated: “Instant-On” ! 3/8" MPT outlets ! Integrated injector — Optional ! Pressure- and flow-engineered for specific pump models “K” Series Pressure Regulators Unloaders relieve line pressure in bypass mode. ! 3/8" FPT Inlet ! 165°F Part No K3 8.712-603.0 8.712-605.0 8.712-607.0 8.712-609.0 8.712-604.0 8.712-606.0 8.712-608.0 8.712-610.0 K5 Part No Old No “W” Series Unloaders 8.712-638.0 8.712-640.0 8.712-643.0 8.712-644.0 8.702-883.0 8.702-888.0 462636 462639 462643 462644 103093B 103098B “W” Series Unloaders with Injectors 8.712-637.0 8.712-641.0 8.712-642.0 8.712-645.0 8.712-647.0 8.702-884.0 462635 462640 462642 462645 462647 103094B Model W1 W1-L W2 W2-L GPM 4.00 4.00 5.56 5.56 W2/W2L Rebuild Kit W1/W1L Rebuild Kit W1-0 W1L-1 W2-1 W2L-1 W2L-2 2.1-2.9 3.0-4.0 2.9-4.0 2.9-4.0 4.2-5.5 Injector Maintenance Kit 1600 1600 3000 3000 3000 W907 W99 W997 W201 WS202 Fits PSI Pump 1600 1600 3000 3000 W905 W99 W997 W201 8.712-611.0 8.712-613.0 8.712-615.0 8.712-612.0 8.712-614.0 8.712-616.0 462551A 462552A 462553A K5.1 K5.2 K5.3 K5.1 K5.2 K5.3 2.90-4.22 4.22-6.60 3/8" M 3/8" M 6.60-10.83 3/8" M 2.90-4.22 4.22-6.60 1/2" M 1/2" M 6.60-10.83 1/2" M NOTE: 1) Use 8.705-045.0 back nut on bypass nipple when mounting 1/2" by pass line on K3s and K5s. 2) Use-restricted (.156 - .225 ID) orifice in bypass line for smoother operation/ pressure balancing. Part No 8.715-478.0 Description Bypass plate for K3/K5 8.701-386.0 K7 - #0 Bypass Orifice 2.2 mm 8.701-389.0 K7 - #1 Bypass Orifice 2.5 mm Old No 462530A 462531A 462532A 462533A Model K3.0 K3.1 K3.2 K3.3 K3.0 K3.1 K3.2 K3.3 GPM 2.10-2.90 2.90-4.22 4.22-5.55 5.00-6.50 2.10-2.90 2.90-4.22 4.22-5.55 5.00-6.50 ! 1/2" FPT B Outlet 3/8" M 3/8" M 3/8" M 3/8" M 1/2" M 1/2" M 1/2" M 1/2" M “K” Series Pressure Regulators Kits Repair Kits for All K3, K5, K7 and K9 models. Part No Old No 8.702-850.0 8.702-847.0 8.702-849.0 8.705-045.0 8.702-858.0 8.702-911.0 103061B 103058B 103060B 140070 103070B 103121B Description K3 Rebuild Kit K5 Maintenance Kit K5 Rebuild Kit K5 Back Nut 3/4" NPT K7 Repair Kit K9 Repair Kit K7 ! 3/8" FPT Part No 8.712-617.0 8.712-618.0 8.712-619.0 8.712-620.0 ! 2.3-10.8 GPM Part No 8.712-602.0 8.712-601.0 ! 1/2" FPT Part No 8.712-621.0 Old No 462574 Model K9 Old No 462526 462525 Old No 462570 462571 462572 462573 Model K7.0 K7.1 K7.2 K7.3 ! 3/8" inlet BSP-F Model 2K138 ZK1 ZK1 K9 ! 165°F GPM 2.11-2.90 2.90-4.22 4.22-6.60 6.60-10.8 Outlet 3/8" M 3/8" M 3/8" M 3/8" M ! 165°F Outlet / Bypass 3/8" BSP-M 1/2" BSP-M ! 165°F GPM 13.2 Outlet 1/2" M K3 Page 120

UNLOADERS, INJECTORS, VALVES & GUAGES Regulator/Unloader - HM ! Excess flow is bypassed to maintain selected pressur !Will operate on single or multiple gun systems ! Brass body — stainless-steel valve and seat ! 3/8" FPT inlet ! 3/8" MPT outlet ! 3/8" FPT bypass ! Flow range – 1.4 to 10.8 GPM ! Pressure adjustable 0-3000 PSI Part No 8.712-622.0 8.702-860.0 Old No 462575 103072B Description HM Regulator/Unloader Repair Kit Regulator / Unloader - ST-261 ! 8 GPM ! Stainless-steel plunger and seat ! 0-3600 PSI regulation ! Viton seals ! 180°F temperature rating ! Forged-brass body ! 22.5 oz weight ST-261 Standard Part No 8.712-681.0 8.900-156.0 8.701-627.0 8.701-650.0 Unloader - Hypro-Style ! All rated at 5 GPM ! Pressures from 400 to 1500 PSI ! 180°F ! Buna seals ! 3/8" MPT inlet and outlet ! 8 oz weight Part No 8.712-689.0 8.712-690.0 8.712-691.0 8.712-692.0 8.712-693.0 8.722-643.0 Old No 462739 462740 462743 462745* 462748* H34300223 Pressure 200-500 400-1000 800-1500 400-1000 800-1500 Repair Kit for All *Bypass port not threaded, closed coupled Part No Unloader - YU – High-Volume ! 21 GPM ! 1/2" FPT inlet, outlet ! 2-1/2" FPT bypass ports YU-2121 Yellow Spring ! 2300 PSI ! 2600 PSI rated pressure Part No 8.753-326.0 8.753-168.0 Spring Yellow Green Part No Regulator / Relief Valve - ST-230 ! 8 GPM ! Complete pressure regulation 0-3600 PSI ! 200°F ! 1/4" FPT inlet and bypass ! Mounts off-line — no line restrictions ! All brass body with stainless-steel piston and seat ! 14 oz weight Part No 8.712-628.0 8.701-626.0 Old No 462590 087926 Description ST-230 Repair Kit 8.712-686.0 8.904-576.0 8.904-577.0 Old No 462696 462697 462698 ST-261 Bypass Switch only ! Field-mountable ! 10 Amp @ 115/230V ! Switches at full bypass flow !Wired N/C (may be wired N/O) Part No 8.712-629.0 8.701-642.0 8.701-647.0 Page 121 Old No 462626 088272 088422 Description Switch Assy Complete Micro Switch Only Seal Kit – Micro Switch GPM 0.0–2.4 2.4–3.5 3.5–5.5 Model ST-261/SI-1 ST-261/SI-2 ST-261/SI-3 ! 200°F ! Forged-brass body ! Stainless-steel internals YU-2140 Green Spring ! 4050 PSI ! 4500 PSI rated pressure 8.712-682.0 8.712-683.0 8.712-684.0 8.900-159.0 8.701-648.0 Old No 462691 462692 462693 088260X 088424 GPM 0.0–2.4 2.4–3.5 3.5–5.5 Model ST-261/I-1 ST-261/I-2 ST-261/I-3 Injector Repr w/o Barb Injector Repr w/ Barb ST-261/SI Unloader with Switch and Injector ! Switches at full bypass flow ! 10 Amp, 110/230V !Wired N/C (may be wired N/O) Bypass 1/4" FPT 1/4" FPT 1/4" FPT Old No 462690 088211X 088209 088466 Description ST-261 STD Seal Kit Repair Kit “B” Outlet Check Kit “A” ST-261/S Unloader with Bypass Switch ! Switches at full bypass flow ! 10 Amp, 110/230V !Wired N/C (may be wired N/O) Part No 8.712-685.0 8.701-647.0 Old No 462695 088422 Model ST-261/S Switch Seal Kit ST-261/I Unloader with Chemical Injector

UNLOADERS, INJECTORS, VALVES & GUAGES Regulator / Unloader - ST-280 ! 8 GPM ! 3600 PSI ! 175°F ! 27.5 oz weight Part No 8.712-674.0 8.701-655.0 8.701-654.0 8.701-653.0 Old No 462680 088536 088535 088534 ! Brass housing — stainless-steel valve ! 3/8" FPT inlet/outlet ! 1/4" FPT bypass Description ST-280 Seat Repair Kit “D” Piston Seal Kit “C” Poppet Repair Kit Unloaders - Pressure-Actuated 13 GPM ! 13 GPM ! 800-3000 PSI ! 160°F ! Bellville spring washers minimize spikes ! Forged-brass bodies / stainless ball and seat ! Four 1/4" side ports enhance versatility ! 1/2" FPT inlet, outlet and bypass ports ! 57.3 oz weight Part No Unloaders - AR Bolt-On Mini-Matic Models. ! Fits XT and XM series pumps ! 2600 PSI-rated pressure ! 1-2" F inlet ! 3/8" M outlet Part No 8.712-582.0 8.712-564.0 8.712-573.0 8.712-576.0 8.712-575.0 8.720-676.0 Old No 462228 462243 462246 462245 AR002812 AR Model No. GPM AR20608 AR20821 AR20890 AR21039 AR21040 Seal Kit Bypass 3-5.5 2-5 2-3 2-3 3-4 AL, No injector AL, No injector AL, Adj injector Brass, Adj injector Brass, Adj injector NOTE: AR has discontinued the Combiset unloaders. Use Mini-Mate unloaders as replacements. For 22mm twist coupler outlet models, add Part No8.709-546.0 (3/8" x 22mm) to injector outlet. 8.712-709.0 8.712-710.0 8.712-711.0 8.712-708.0 8.722-137.0 Old No 462934 462935 462937 462933 G012099 Model No. 22910 22911 22912 22913 Repair Kit PSI 800 1400 2400 3000 Spring Silver Yellow Red Orange Unloaders - Pressure-Actuated ! Unloads pressure in entire system when in bypass ! Forged-bronze body ! Stainless-steel seat ! 3/8" FPT inlet/ 3/8" FPT outlet ! 1/4" FPT bypass ! 160°F 8.712-705.0 Part No Unloaders - Gymatic ! RK and XM series pumps ! 3650 PSI-rated pressure ! 3-5.5 GPM ! 3/8" M outlet Part No 8.712-565.0 8.712-563.0 8.712-574.0 8.712-567.0 8.712-568.0 8.712-569.0 8.720-642.0 Old No 462229 462226 462244 462233 462235 462236 AR002611 ! Max PSI: 4000 ! Max GPM: 5 Part No 8.712-583.0 Old No 462255 ! Max PSI: 4000 ! Max GPM: 5 Part No 8.720-903.0 Old No AR20992 AR Model No. Inlet AR20242 AR20242G AR20081 AR20082 AR20399 AR20400 ! Inlet: 1/2" M ! Outlet: 3/8" M NPT AR Model No. AR21669 ! Inlet: 1/2" F ! Outlet: 3/8" M AR Model No. AR20992G Page 122 ! Bypass: brass 8.712-705.0 8.712-706.0 Old No 462927 462928 Model No. 22760APM 22765APM GPM 8 5 PSI 3000 4000 8.712-706.0 Unloaders - Flow-Actuated 1/2" F w/ no injector 3/4" (GHF) w/ no injector 1/2" M fixed injector #1 (2-3 gal) 1/2" M fixed injector #2 1/2" M adj injector #1 (2-3 gal) 1/2" M adj injector #2 Repair Kit ! Bypass: brass !Without injector ! Unloads pressure in entire system when in bypass ! Forged-bronze body ! Stainless-steel seat ! 3/8" FPT inlet/ 3/8" MPT outlet ! 1/2" bypass ! 160°F Part No 8.712-698.0 8.712-701.0 8.712-702.0 8.712-703.0 8.722-204.0 Old No 462909 462913 462914 462915 G022666 Model No. 22650 22654 22655 22656 Seal Kit GPM 3.0–4.5 3.5–4.8 4.5–5.5 4.5–6.5 PSI 0-3000 3000-4000 0-3000 0-3000

UNLOADERS, INJECTORS, VALVES & GUAGES Unloaders - MG4000 Series “The world’s best unloader value” with a choice of PSI: 1500, 3000 or 4500. ! Forged-brass body ! 3/8" FPT inlet, outlet and bypass ! Auxiliary 1/4" outlet ! 10 GPM ! 200°F ! Up to 4500 PSI ! Can be panel mounted ! Pressure limit indicated with color coded ring Part No Without Knob 8.712-715.0 8.712-718.0 8.712-724.0 With Knob 8.712-716.0 8.712-719.0 8.712-725.0 8.704-567.0 Old No 463108 463110 463114 463108K 463110K 463114K 111442 MG4000 with Microswitch ! Can be used as Normally Open (NO) or Normally Closed (NC) ! Use for time-delay shutdown or as burner control ! Up to 4500 PSI ! Panel mountable ! 15 Amp microswitch Part No 8.712-717.0 8.712-720.0 8.712-714.0 8.712-727.0 Old No 463109K 463111K 463105K 463115K PSI 1500 3000 3600 4500 Color Yellow Red Blue Black PSI 1500 3000 4500 1500 3000 4500 Repair Kit Color Yellow Red Black Yellow Red Black Regulator Valve - Timax Pressure ! Max flow 52 GPM ! Max pressure 1000 PSI ! Lever control manual dump for bypass to relieve line pressure ! 3/4" and 1" FPT inlet and outlet ! 3/4" FPT bypass ! Brass body – stainless-steel piston and seat Part No 8.712-624.0 8.702-844.0 Old No 462580 103051B Description Timax Reg Valve Repair Kit Regulator - VS 200 / 180 High-Volume ! 53.5 GPM ! 2600 PSI ! 194°F ! 3/4" FPT inlet x 1/2" FPT bypass ! 29.4 oz weight Part No 8.712-753.0 8.704-582.0 Old No 463705 111520 Description VS 200/180 Repair Kit Regulator / Relief Valve - VS 350 ! Rated pressure: 5100 PSI ! 5600 PSI ! 6.5 GPM ! 195°F ! 3/8" FPT inlet, outlet and bypass ! 16.8 oz weight Safety Pressure Relief Valves Engineered and built by Interpump. Premium-quality valves for all pressure systems. ! Adjustable pop-off protection ! Machined-brass bodies ! Stainless-steel plunger and seat ! 165°F ! 3/8" MPT connect x 1/4" MPT ! Bypass and outlet ! S – R: Safety valve – 3000 PSI @ 1.3 to 10.8 GPM ! S – 3: Safety valve – 500 to 10,000 PSI @ 2.6 to 26.5 GPM Part No 8.711-215.0 8.711-227.0 Old No 390103 390123 Description S – R Valve S – 3 Valve Part No 8.712-756.0 8.704-611.0 Old No 463720 111832 Description VS 350 Repair Kit Regulator / Relief Valve VS 500 High-Pressure ! Forged-bronze body ! 21 GPM ! 7250 PSI-rated pressure ! 8100 PSI maximum pressure ! 195°F ! 1/2" FPT inlet and 3/8" FPT bypass ! 14.2 oz weight Part No 8.712-757.0 Page 123 Old No 463725 Description VS 500

UNLOADERS, INJECTORS, VALVES & GUAGES Regulator / Relief Valve - VS 220 6.3 GPM – 3600 PSI max pressure ! Rated 3200 PSI ! 200°F ! Forged-bronze body ! Stainless-steel plunger and seat valve ! Two 3/8" FPT inlets ! 3/8" FPT outlet/bypass ! Compact design ! 14.2 oz weight Part No 8.712-737.0 8.901-057.0 Old No 463655 111576 Description VS 220 w/o Knob Repair Kit Injector - Amerimax The higher rate injector. Our best seller! ! Brass housing ! Stainless-steel orifice ! Fully adjustable metering valve ! Stainless-steel spring ! 3500 PSI ! 3/8" MPT inlet/outlet ! 1/4" hose barb Part No Regulating Relief Valve Eco nom i cal re place ment for paraplate BR5 Series. for smooth operation ! Machined-brass body and knob ! 3/8" FPT inlet, outlet and bypass ! Flow-thru design Part No 8.712-625.0 8.900-042.0 Old No 462585 075127 Description Relief Valve Repair Kit Quick-Coupled Amerimax Unloader Mounting Block End vibration-caused fitting failure. ! 12 GPM ! Mounting hardware included ! Machine block brass or steel Part No 8.904-568.0 8.904-567.0 9.802-870.0 9.802-871.0 Old No 462183X 462182X Description 3/8" x 3/8" 1/2" x 1/2" 3/8" x 3/8" 1/2" x 1/2" Material Brass Brass Steel Steel PSI 5500 5500 Assembled for added convenience — quick couples to unloader outlet and quick couples hose to injector outlet. ! Top-quality quick couplers: 3/8" plug inlet, 3/8" socket outlet ! 6' industrial-grade poly-braid reinforced tubing (will not collapse, resists crimping, high-chemical tolerance) ! Heavy-duty brass chemical filter with check valve prevents loss of prime Part No Amerimax “QC” 8.904-195.0 8.904-196.0 8.904-197.0 8.904-199.0 8.900-040.0 Chem Injector - 5500 PSI Stainless Steel Old No 360135X 360136X 360137X 360138X 075122X Amerimax Acid “QC” 8.904-205.0 8.904-206.0 8.904-207.0 8.904-208.0 8.900-041.0 *Ceramic check ball 360145X 360146X 360147X 360148X 075123X Description Quick-Coupled “0”, 1–2 GPM Quick-Coupled “1”, 2–3 GPM Quick-Coupled “2”, 3–5 GPM Quick-Coupled “3”, 5–8 GPM Repair Kit (Stainless-Steel Check Ball) Quick-Coupled “0A”, 1-2 GPM Quick-Coupled “1A”, 2-3 GPM Quick-Coupled “2A”, 3-5 GPM Quick-Coupled “3A”, 5-8 GPM Acid Repair Kit* ! Stainless-steel plunger and seal Standard 8.904-192.0 8.904-193.0 9.803-998.0 8.904-194.0 8.900-040.0 Old No 360130 360131 360132 360133 075122X ! 7 GPM ! Pressure adjusts 200-2000 PSI ! 200°F 8.904-202.0 8.904-203.0 8.904-204.0 8.700-536.0 8.900-041.0 *Ceramic check ball 360140X 360141X 360142X 360143X Description “0”, 1-2 GPM “1”, 2-3 GPM “2”, 3-5 GPM “3”, 5-8 GPM Repair Kit (Stainless-Steel Check Ball) “Acid” Injector w/ Special Inlet Check Valve 8.904-201.0 “0A”, 1-2 GPM “1A”, 2-3 GPM “2A”, 3-5 GPM “3A”, 5-8 GPM 075123X Ceramic Ball for 8.904-203.0 Acid Repair Kit* Part No. 9.802-217.0 9.802-226.0 Old No 3-1208 4-011186 GPM 3.0-5.0 3.0-5.0 PSI 5500 5500 Description Non-Adjustable, Injector Only Assembly Page 124

UNLOADERS, INJECTORS, VALVES & GUAGES Chemical Injector - ST-60 Requires ST-61(below) to regulate chemical injection rate. ! Forged-brass body ! Compact size ! Forged-brass body ! Inlet 3/8" MPT ! Outlet 3/8" FPT Part No 8.710-476.0 8.710-477.0 8.710-478.0 8.701-648.0 Old No 360120 360121 360122 088424 Description 1.50-2.25, ST-60/0 2.25-3.35, ST-60/1 3.35-5.00, ST-60/2 Repair Kit “F” Chemical Injectors - Robokim ! Forged-brass body ! Stainless-steel orifice ! Stainless-steel inlet check valve components ! 3500 PSI ! 180°F ! 3/8" MPT inlet/outlet ! 1/4" hose barb Part No Old No Robokim w/ Plastic Meter Knob 8.710-497.0 8.710-498.0 8.710-499.0 8.710-500.0 360200 360201 360202 360203 Chemical Metering Valve - ST-61 ! Snap-on attachment to ST-60, ST-62, ST-261/I usage limited to these injectors ! Adjusts from off to full flow ! Glass-filled polyamide body and valve parts ! 1/4" hose barb ! Teflon ® seals Part No 8.710-777.0 Old No 371161 Description ST-61 Chemical Injectors - Robokim Quick-Coupled ! Quick-couplers: 3/8" QC plug inlet, 3/8" QC socket outlet Chemical Injector - ST-62 Variable Flow orifice adjusts for machines from 2-8 GPM. Requires ST-61 to regulate chemical injection rate. ! Forged-brass body ! 3500 PSI ! 8 GPM ! 6' industrial-grade poly-braid reinforced tubing ! AP brass chemical filter w/ stainless-steel check valve Part No Old No Robokim “QC” w/ Plastic Knob 8.904-209.0 8.904-210.0 8.904-211.0 8.904-212.0 360210X 360211X 360212X 360213X Part No 8.710-485.0 8.701-648.0 Old No 360162 088424 Description ST-62 Repair Kit “F” Robokim “QC” w/ Brass Knob 8.904-217.0 8.904-218.0 8.904-219.0 8.904-220.0 360230X 360231X 360232X 360233X Injector - ST-64 Up Stream Apply soap at high pressure. Restricts waterflow to create suction. ! 140 PSI ! 160°F ! 3/4" FGH inlet ! 3/4" MGH outlet ! Chemical strainer and 4' PVC tubing included ! Adjustable with ST-61 meter valve ! Locking waterflow adjustment Part No 8.710-482.0 8.710-483.0 Old No 360155 360156 GPM 1.5-4.0 4.0-7.0 Hi-Lo Injector May be used on high or low side of pump. Adjustable flow orifices plus adjustable chemical valves. Standard features similar to ST-62. ! Performance Range: Low side: .5-3.5 GPM @ 10-120 PSI ! High side: 2.0-8.0 GPM @ 3500 PSI ! Machined-brass body ! 3/8" FPT inlet/outlet Part No 8.710-486.0 8.710-487.0 8.700-290.0 8.900-044.0 Page 125 Old No 360163 360165 075136 075136X Description Hi/Lo Injector w/ Meter Valve w/o Chemical Adjust Repair Kit Seal Kit Description “0”, 2.1-2.9 GPM “1”, 3.0-4.0 GPM “2”, 4.0-5.5 GPM “3”, 5.5-10.8 GPM “0”, 2.1-2.9 GPM “1”, 3.0-4.0 GPM “2”, 4.0-5.5 GPM “3”, 5.5-10.8 GPM Robokim w/ Brass Meter Knob 8.904-213.0 8.904-214.0 8.904-215.0 8.904-216.0 8.900-481.0 8.900-061.0 360220 360221 360222 360223 103053X 077010X Description “0”, 2.1-2.9 GPM “1”, 3.0-4.0 GPM “2”, 4.0-5.5 GPM “3”, 5.5-10.8 GPM “0”, 2.1-2.9 GPM “1”, 3.0-4.0 GPM “2”, 4.0-5.5 GPM “3”, 5.5-10.8 GPM Repair Kit Acid Kit

UNLOADERS, INJECTORS, VALVES & GUAGES Chemical Injectors - 400 Series The injector of choice ! Teflon valve seat ® ! 3/8" inlet and outlet (3 configurations) ! Forged-brass housing ! 3200 PSI ! Renewable orifices and check valve ! 200°F ! Options include: quick-coupled, stainless-steel orifices/ acid-resistant check ! Only 5 oz weight Orifice Selection Orifice Dia. 1.6mm 1.8mm 2.1mm 2.3mm Flow Rate 1.5-2.7 GPM 2.0-3.6 GPM 2.7-4.9 GPM 3.3-6.0 GPM Adjustable Injectors, precise needle-metering valve. Orifice M x M Size(mm) Brass 1.6 1.8 2.1 2.3 Stainless-steel 1.6 1.8 2.1 2.3 Part No Part No 8.710-541.0 8.710-535.0 8.710-537.0 8.710-539.0 8.710-542.0 8.710-536.0 8.710-538.0 8.710-540.0 Old No 109220X M x M Old No 360406 360400 360401 360402 360406S 360400S 360401S 360402S Description Repair Kits include Check Ball, Spring, Seat and O-ring 8.900-769.0 Standard Kit Orifice Size(mm) M x M Part No Brass/Acid-Resistant 1.6 1.8 2.1 2.3 8.904-230.0 8.904-224.0 8.904-226.0 8.904-228.0 Stainless-steel/Acid-Resistant 1.6 1.8 2.1 2.3 Part No Old No 109222X 8.904-231.0 8.904-225.0 8.904-227.0 8.904-229.0 M x M Old No 360406A 360400A 360401A 360402A 360406AS 360400AS 360401AS 360402AS Description Repair Kits include Check Ball, Spring, Seat and O-ring 8.900-770.0 Acid Kit M x F Part No 8.904-238.0 8.904-232.0 8.904-234.0 8.904-236.0 8.904-239.0 8.904-233.0 8.904-235.0 8.904-237.0 M x F Old No 360416A 360410A 360411A 360412A 360416AS 360410AS 360411AS 360412AS F x M Part No - F x M Old No - 8.904-240.0 360420A 8.904-242.0 360421A 8.904-244.0 360422A 8.904-246.0 360426AS 8.904-241.0 360420AS 8.904-243.0 360421AS 8.904-245.0 360422AS M x F Part No 8.710-549.0 8.710-543.0 8.710-545.0 8.710-547.0 8.710-550.0 8.710-544.0 8.710-546.0 8.710-548.0 M x F Old No F x M Part No 360416 360410 360411 360412 360416S 360410S 360411S 360412S F x M Old No 8.710-559.0 360426 8.710-551.0 360420 8.710-554.0 360421 8.710-557.0 360422 8.710-560.0 360426S 8.710-552.0 360420S 8.710-556.0 360421S 8.710-558.0 360422S Page 126

UNLOADERS, INJECTORS, VALVES & GUAGES Series 505 Stainless-Steel All metal parts are stainless-steel ! Premier type injector ! 8 GPM ! 5650 PSI ! 3/8" inlet/outlet ! 195°F ! Teflon O-rings Injectors - Brass All metal parts are brass ! Premier type injector ! 3200 PSI ! 3/8" inlet/outlet ! 190°F Part No Part No 8.710-586.0 8.710-587.0 8.710-588.0 8.704-027.0 Old No 360505/1.8 360505/2.1 360505/2.3 109234 Description GPM Stainless-Steel Injector 1.8 Stainless-Steel Injector 2.1 Stainless-Steel Injector 2.3 Repair Kit 2.0-3.6 2.7-4.9 3.3-6.0 8.710-505.0 8.710-506.0 8.710-507.0 8.704-028.0 Old No 360245 360246 360247 109235 Description GPM Brass Injector 1.8 2.0-3.6 Brass Injector 2.1 2.7-4.9 Brass Injector 2.3 3.3-6.0 Repair Kit Injector - Adjustable QuickConnect ! 3500 PSI ! 200°F Pressure Reducer/Injector - Exact-A-Flow “Low side” chemical injector that regulates inlet pressure to maintain consistent chemical ratio. ! Up to 6 GPM ! 1/2" FPT I/O ports ! 1/4" hose barb chemical inlet ! ± 2% injection ratio variation Part No 8.710-502.0 8.710-503.0 8.710-504.0 Acid Injectors 8.904-221.0 8.904-222.0 8.904-223.0 8.701-187.0 8.900-087.0 Original No. 360240 360242 360244 360240A 360242A 360244A 080055 080056 GPM 2-3 3-5 5-8 2-3 3-5 5-8 Injector Repair Kit Injector Acid Kit Part No 8.711-162.0 8.711-160.0 8.711-161.0 8.904-389.0 8.904-390.0 Old No 385127 385125 385126 385128 385129 Description Weep Seat* Non-Weep With Switch** Hose Barb w/ Viton Check Hose Barb w/ Buna Check *Weep Seat allows pump to self-prime **With burner control switch au to mat i cal ly turns burner off when wa ter flow stops Page 127

UNLOADERS, INJECTORS, VALVES & GUAGES Adjustable Bronze Float Valves ! Cast-bronze body ! Live rubber stopper Part No 8.710-045.0 Old No 343306 ! Adjustable float arm ! 180°F PA Float Valve ! 140°F ! 3/8" BSP inlet ! Brass body ! Positional/adjustable arm ! 5 GPM @ 15 PSI ! 7 GPM @ 30 PSI Thread 1" NOTE: Float valves above require stem and float, below Repair Parts for Adjustable Valves 8.700-475.0 8.700-476.0 8.700-477.0 8.700-479.0 8.700-481.0 076406 076407 076408 076418 076422 *Fits 3/8", 1/2" and 3/4" valve only Long Arm* Short Arm* Thumb Screw* 3/8" and 1/2" Plunger 1" Plunger Brass Float Valve Assembly Complete assembly includes valve, stem and float. Stems Only 9.802-157.0 Part No 9.802-157.0 8.710-047.0 8.710-051.0 Old No 343310 343310C 343315 Parts for other float valves also available Length 8" 8" 10" ! 1/2" FPT inlet ! Brass housing with polyamide cover ! 4.5 GPM ! 175°F Part No 8.710-031.0 8.710-047.0 Material SS Brass SS Thread 1/4" – 20 1/4" – 20 x 5/16" – 18 1/4" – 20 Brass Float, Ball and Stem Copper and Plastic Float Balls ! 142 PSI max inlet pressure ! 140°F ! 7.1 GPM @ 28 PSI – 1/2" MPT inlet ! Positive soft Buna/brass shut-off ! Adjustable float ball settings ! Inlet nut and washer seal provided Part No 8.710-037.0 8.704-092.0 8.710-053.0 Part No 8.710-061.0 8.710-052.0 8.710-053.0 Plastic 8.710-057.0 8.710-059.0 9.802-061.0 Old No 343326 343317 343318 343321 343323 343325 Parts for other float valves also available 9.802-061.0 Length 4" x 5" 5" 6" 6" 8" 4" x 5" Material Copper Copper Copper Plastic Plastic Plastic Thread 1/4" – 20 1/4" – 20 1/4" – 20 1/4" – 20 1/4" – 20 1/4" – 20 Diaphragm Float Valve ! Requires only 6.5" x 3" inside tank ! All-plastic snap-on float ! Positive shutoff diaphragm style ! Inlet screen, tank gasket and nut included ! Rebuildable — repair parts available ! 3/4" MPT inlet ! 142 PSI ! 7.86 GPM @ 28 PSI ! 6.68 GPM @ 14 PSI ! 140°F Part No 8.710-030.0 Old No 343007 Description Float Valve Complete Old No 343050 109502 Description Valve Complete Repair Kit Old No 343010 MPT Adapter Kit for ST-8* 8.710-033.0 343012 *Double MPT nipple,sealing washer and lock nut Description ST-8 Stem 1/4" – 20 GPM @ 40 PSI 47 Part No 8.710-042.0 8.704-204.0 Old No 343301 110250 Description 3/8" Float Valve Repair Kit Page 128

UNLOADERS, INJECTORS, VALVES & GUAGES Vertical Float Tank Valve ! 9 GPM @ 150 PSI - 1/2" MPT inlet ! 140°F ! Inlet nut and washer seal provided Part No 9.802-185.0 Description Vertical Float Tank Valve Stainless-Steel Check Valves ! Rated pressure: 5800 PSI ! 6500 PSI ! 195°F ! Female x female ! 2.0 oz weight Part No 8.709-361.0 8.709-362.0 Hudson Float Valve ! No external moving parts ! No float ball or arm ! Operates between 0-130 PSI ! All plastic, nylon, rubber and stainless-steel Part No 8.710-035.0 8.710-036.0 Old No 343022 343026 ! 90°F ! 1" inlet — easy installation ! Automatic anti-siphon ! Flow capacity 80% of supply (40 GPM @ 40 PSI) Description 1" Hudson Float Valve, 90° 1" Hudson Float Valve, 150° Old No 310827 310828 Description 1/4" F x F 3/8" F x F Flow Rate 6.1 10.5 High-Pressure Check Valves 2500 or 3000 PSI ball check. ! Buna seals ! Stainless-steel check ball ! Machined-brass body ! 1 PSI cracking pressure Part No Old No Kerick Float Valve ! Flow rates for 1/2" valve: ! 20 PSI: 7.7 GPM ! 30 PSI: 9.1 GPM ! 40 PSI: 10.5 GPM ! 50 PSI: 11.4 GPM ! 60 PSI: 12.5 GPM Part No 8.749-328.0 8.749-329.0 Description 1/2" Float Valve, .25" orifice 3/4" Float Valve, .30" orifice ! Flow rates for 3/4" valve: ! 30 PSI: 13 GPM ! 60 PSI: 16.5 GPM 2500 PSI Miniature Ball Check 8.709-356.0 8.709-357.0 310814 310815 8.709-359.0 310820 310822 8.709-356.0 Description 1/4", M x F 1/4", M x M 3000 PSI Stainless Guided Ball and Quad Ring Seat 8.709-358.0 1/4", F x F 3/8", F x F 8.709-357.0 8.709-358.0 Check Valves – 1200 PSI Allows excellent low-restriction flow in inlet di rec tion and instant positive-check action in reverse direction. Check Valves – Swing Action Retain prime on pumps with low-lift capability ! Brass body with swing (flapper) action ! 150 PSI ! FPT inlet/outlet ! Gravity seal — no spring pressure Part No 8.709-378.0 8.709-379.0 8.709-380.0 8.709-381.0 8.709-382.0 8.709-383.0 Old No 310862 310863 310864 310865 310866 310868 Description 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Brass Check Valves – Spring-Loaded Holds pump prime without overloading pump suction ! Machine-cast brass bodies, FPT x FPT ! 150 PSI ! 250°F ! Mount horizontal or vertical Part No 8.709-384.0 8.709-385.0 8.709-386.0 Page 129 Old No 310872 310873 310874 Description 1/2" 3/4" 1" ! Machined-brass body ! Poppet seal ! Cracking pressure 1 PSI Part No 8.709-351.0 8.709-352.0 8.709-353.0 8.709-354.0 Old No 310804 310806 310808 310811 Description 1/4", F x F 3/8", F x F 1/2", F x F 3/4", M x M

UNLOADERS, INJECTORS, VALVES & GUAGES Backflow Preventor – Check Valve Protects water supply from harmful chemical backflow — will not allow “spike” pressure to push chemicals into supply line. Now re quired by many city and state regulations. ! 3/4" female garden hose inlet (with lock screw) ! 3/4" male garden hose outlet ! Machined-brass housing ! Plastic diaphragm check Part No 8.705-039.0 Old No 140060 PVC Check Valve Holds pump prime without overloading pump suction. ! Designed for harsh chemical applications ! PVC plastic body ! Stainless-steel ball check Part No 8.709-366.0 8.709-367.0 8.709-369.0 8.709-370.0 8.709-373.0 Old No 310834 310835 310837 310838 310844* *8.709-373.0 has Viton seals Stainless-Steel Ball Valves – 2000 PSI ! Full-flow ports ! Investment cast process ! Two-piece 316 stainless bodies ! Glass-filled Teflon ® seals ! 180°F @ 2000 PSI ! 300°F @ 1000 PSI ! 350°F @ 300 PSI Part No 8.709-265.0 8.709-266.0 8.709-268.0 8.709-269.0 Old No 306534 306536 306538 306540 Description 1/4" F x F 3/8" F x F 1/2" F x F 3/4" F x F Forged-Brass Ball Valves ! 600 PSI ! 180°F ! Forged-brass body ! Full-flow ports ! Teflon PTFE seals M x F Part No F x F Part No M x M Part No Size 8.709-249.0 8.709-252.0 8.709-255.0 8.709-258.0 8.709-261.0 8.709-250.0 8.709-253.0 8.709-256.0 8.709-259.0 8.709-262.0 8.709-251.0 8.709-254.0 8.709-257.0 8.709-260.0 8.709-263.0 1/4" 3/8" 1/2" 3/4" 1" Page 130 High-Pressure Ball Valves ! Rugged carbon steel construction ! 2-way ! NPT (F x F) threads ! Blow-out proof stems ! Delrin ball seats ! Viton O-rings Part No 8.709-274.0 8.709-276.0 8.709-279.0 8.709-282.0 8.700-270.0 8.700-271.0 Old No 306552 306553 306554 306556 075080 075089 FPT 1/4" x 1/4" 3/8" x 3/8" 1/2" x 1/2" 3/4" x 3/4" PSI 7350 7350 7350 5880 Replacement handle – fits all sizes above Replacement screw for handle Stainless-Steel, High-Pressure Ball Valves – 5800 PSI ! 316 stainless-steel body, ball and stem ! Viton O-rings ! Delron ball seats ! Full port Part No 8.709-277.0 8.709-280.0 8.709-283.0 8.709-286.0 Old No 306553S 306554S 306556S 306558S FPT 3/8" x 3/8" 1/2" x 1/2" 3/4" x 3/4" 1" x 1" PSI 5880 5880 5880 5880 ! Cracking press 1 PSI ! Choice of connects ! 125 PSI ! 180°F Description 1/4" MPT x 1/4" Barb 1/4" Barb x 1/4" MPT 1/4" Barb x 1/4" Barb 3/8" Barb x 3/8" Barb 1/2" Barb x 1/2" Barb M x F Part No F x F Part No M x M Part No Size 8.709-208.0 8.709-211.0 8.709-216.0 8.709-209.0 8.709-212.0 8.709-217.0 – 8.709-213.0 8.709-218.0 1/8" 1/4" 3/8" Description Backflow Preventor Nickel-Plated Brass Ball Valves ! Threaded FPT connects ! Chrome-plated ball ! Seats and seals have glass-filled Teflon ! Full-flow bore Part No 8.709-242.0 8.709-243.0 8.709-244.0 8.709-245.0 8.709-246.0 8.709-247.0 8.709-248.0 8.709-264.0 Old No 306504 306506 306508 306512 306516 306520 306524 306532 Mini Ball Valves ! Forged-brass body ! 600 PSI ! 180° handle movement ® Description Working Pressure (PSI) 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 710 710 710 570 570 430 430 360

UNLOADERS, INJECTORS, VALVES & GUAGES Ball Valves - Stainless-Steel, One-Piece – 800 PSI ! Standard port ! 316 stainless-steel body Part No 8.709-287.0 8.709-288.0 8.709-289.0 8.709-290.0 Old No 306582 306583 306584 306585 ! 300°F @ 800 PSI ! 350°F @ 400 PSI ! Suitable for steam FPT 1/4" x 1/4" 3/8" x 3/8" 1/2" x 1/2" 3/4" x 3/4" Ball Valves - Polypropylene Full port reinforced polypropylene. Ball Valves - Brass Mini ! Compact knob operation ! Brass housing-hex bar ! 220 PSI working pressure Part No 8.709-270.0 8.709-271.0 8.709-272.0 8.709-273.0 Old No 306542 306544 306546 306548 ! Designed to fit tight quarters ! Teflon seals ® Part No ! Only 1-3/4" long FPT 1/8" x 1/8" 1/4" x 1/4" 3/8" x 3/8" 1/2" x 1/2" 8.709-223.0 8.709-224.0 8.709-225.0 8.709-226.0 Old No Two-Way Ball Valves 8.709-222.0 306390 306392 306394 306398 306400 Ball Valves - PVC Great for chemical on/off flow control ! PVC and nitrile material ! Chemical and impact resistant Part No 8.709-214.0 8.709-219.0 8.709-220.0 Old No 306352P 306354P 306356 ! Flag handle ! 180°F ! 125 PSI Description 1/4" Panel Mtg, Barb x Barb 1/4" In-line, Barb x Barb 3/8" In-line, Barb x Barb Three-Way Ball Valves 8.709-227.0 8.709-228.0 8.709-229.0 8.709-230.0 8.709-231.0 8.709-232.0 FPT 1/2" x 1/2" 3/4" x 3/4" 1" x 1" 1-1/2" x 1-1/2" 2" x 2" ! 150 PSI working pressure ! Easy turn w/ Telflon ® seals ! Double seal in stem for “no leak” ! Threaded mounting bosses, brass insert on 1-1/4"- 2" sizes 8.709-222.0 8.709-228.0 Ball Valve Brass Part No Old No 8.753-959.0 ! 3000 PSI Description Ball Valve Brass, 3/8" F x F, BSPF x BBPP 306408 306412 306416 306420 306422 306424 1/2" x 1/2" x 1/2" 3/4" x 3/4" x 3/4" 1" x 1" x 1" 1-1/4" x 1-1/4" x 1-1/4" 1-1/2" x 1-1/2" x 1-1/2" 2" x 2" x 2" Ball Valve - 3-Way ! 400 PSI maximum pressure ! 180°F maximum temperature ! Teflon seat Ball Valves - Compact PVC ! FPT thread both ends ! 150 PSI working pressure ! Easy-turn handle Part No 8.709-233.0 8.709-234.0 8.709-235.0 8.709-236.0 8.709-237.0 8.709-238.0 8.709-239.0 Old No 306444 306448 306450 306452 306454 306456 306460 FPT 1/4" x 1/4" 1/2" x 1/2" 3/4" x 3/4" 1" x 1" 1-1/4" x 1-1/4" 1-1/2" x 1-1/2" 2" x 2" ! 150°F ! EPDM seals – white body Part No 8.709-207.0 Old No 306331 ! Buna seals ! Brass Description 1/4" M x F x F Flow Selector Valve 3-way and 4-way lever control with brass body. ! 3-way ! 4-way ! Plumb for 2 inlets and 1 outlet or 1 inlet and 2 outlets Part No 8.710-108.0 8.710-110.0 8.710-113.0 8.710-114.0 Page 131 Old No 343734 343736 343744 343746 ! Plumb for 3 inlets and 1 outlet or 1 inlet and 3 outlets ! 180°F rated temperature Description 1/4" FPT 3-Way 3/8" FPT 3-Way 1/4" FPT 4-Way 3/8" FPT 4-Way

UNLOADERS, INJECTORS, VALVES & GUAGES Flow Control Metering Valve ! Forged-brass, nickel-plated body ! Panel mtg in 17/32" hole ! Compact size Part No 8.710-775.0 8.710-776.0 Old No 371125 371133 ! Double-stem seal ! 300 PSI ! 175°F rated temperature Description 1/4", FPT In/out 3/8", FPT In/out Chemical Metering / On-Off Valve ! Dual-knob control — calibrate chemical flow w/ base knob. Outside knob allows on/off control without changing calibration ! Single 1/2" hole panel mounting ! Brass and stainless-steel materials Part No 8.710-770.0 Old No 371100 Description MV-100 Flow Control Metering Valve The valve that “seals” (will not suck air). Chemical Meter and Selection Valve - ST-66 ! 3500 PSI to 28" vacuum — no leak ! Viton gland seal isolates metering threads from solution ! Stainless-steel needle / brass seat ! 1/4" FPT ports ! Heavy-duty brass bar stock body ! 195°F rated temperature ! Panel mounts 5/8" hole ! Large easy-grip four-lobe handwheel ! Aluminum or poly available Part No 8.904-362.0 8.904-361.0 8.740-083.0 Old No 371120X 371120P 077003A Description Metering Valve / Alum Knob Metering Valve / Poly Knob Replacement Knob ! Two input barbs — for different chemicals to single outlet barb ! Double-metering dial with center OFF ! Panel mount in single 5/8" hole Part No 8.710-779.0 Old No 371166 Description ST-66 Steam Valve Brass Metering Valve ! 1/4 inlet/outlet ! 450 PSI ! 170°F ! Easy-grip, fluted plastic handle with pointer ! Brass body, Viton gland seal eliminates air leaks ! Panel mount 11/16" or 3/4" hole ! Extremely compact T-style Part No 8.710-773.0 8.710-774.0 9.802-188.0 Old No 371115 371116 Description “T” 1/4" F x F – Forged “L” 1/4" M x M – Machined “L” 1/4" M x M A MUST for any pump that might ever be left in bypass mode (unloading) for more than 15 seconds. Protects the pump from overheating caused by recirculating water. Chemical Metering Valves ! Adjusts from off to full flow ! 4000 PSI ! 1/4" FPT inlet – outlet ! 6 GPM ! 9.802-187.0 has presettable limiting orifice Part No 8.710-771.0 9.802-187.0 9.802-532.0 Old No 727628 2-30151 Description Flow Control Flow Control w/ Locking Adjustment Valve, Less Solenoid ! Installs in bypass line ! Automotive style wax element 9.802-187.0 ! Automatically resets at cool down to 115°+ F Part No 8.904-564.0 8.904-565.0 8.904-566.0 8.723-943.0 Page 132 Old No 458000 458001 458005 458007 Inlet 1/4" MPT 3/8" MPT 1/2" MPT 1/2" MPT ! No adjustment required ! 1/8" FPT side discharge ! 125 PSI inlet pressure ! 2.5 GPM flow “Trip” Temp 140°F 140°F 140°F 165°F For “combo” hot pressure washer/steamer units. The single-turn on/off diverter valve bypasses pump flow to reduce water flow to the coil, creating steam in place of normal hot water. ! Panel mount in 11/16" or 3/4" hole ! Machined-brass body ! Easy-grip plastic knob ! 3600 PSI ! 175°F ! 1/4" MPT inlet/ outlet Part No 8.711-263.0 8.904-406.0 8.904-407.0 8.904-408.0 8.904-409.0 Old No 400008 400012 400015 400018 400020 Orifice (mm) 0.8 1.2 1.5 1.8 2.0 Thermal Relief Valves

UNLOADERS, INJECTORS, VALVES & GUAGES Compact Thermal Relief Valves ! 145°F or 190°F “Trip” temperature Part No 8.712-544.0 8.712-545.0 9.802-181.0 9.804-025.0 8.707-250.0 9.803-670.0 Old No 458024 458026 921421 Size 1/4" MPT 3/8" MPT 3/8" MPT 1/4" MPT 3/8" MPT 1/2" MPT “Trip” Temp 145°F 145°F 145°F 145°F 190°F 190°F Rupture Disks Part No 9.802-192.0 8.707-381.0 Old No 2-3409 ! Prevents dangerous thermal expansion of water in the coil ! Ensures operator safety Description Assembly, 7000 PSI Assembly, 8500 PSI Safety Pressure Relief Valves TRV Thermal Relief Valves ! Low profile ! Brass body ! Plastic-covered barb ! 7mm hose barb ! 145 PSI ! Opens at 145° Part No 8.712-547.0 8.712-548.0 Old No 458032 458034 Inlet 3/8" 1/2" ! Machined brass ! Automatically resets ! Prevents pressure overloads, protecting people and equipment Part No 8.722-192.0 8.722-193.0 8.722-194.0 8.722-190.0 9.802-191.0 Old No G022550A G022560A G022565A G022532A G022533A Max PSI Size 1200 (Silver Spring) 2400 (Red Spring) 3600 (Orange Spring) 3600 (Orange Spring) 5000 (Blue Spring) 1/4" 1/4" 1/4" 3/8" 3/8" Air Valve – Coil Blow Out Flow Meters The answer to precision calibration and efficient operation of pressure washing systems. ! Flow scale measures gallons per hour (GPH) ! 100 PSI ! 150°F ! 1/8" FPT inlet and outlet port ! Accurate within ±5% ! Precision-cut and machined-clear acrylic ! Metal mounting inserts for ease of installation (10-32 threads) !Wetted parts are brass or stainless-steel, with or without metering values ! Compact size — 2" tall scale, 4-3/32" overall height Part No 8.710-097.0 8.710-098.0 8.710-101.0 8.710-102.0 8.710-099.0 8.710-100.0 8.710-104.0 8.710-105.0 Old No 343722 343723 343726 343727 343724 343725 343728 343729 GPH .6-5 .6-5 2-10 2-10 .6-5 .6-5 2-10 2-10 Metal Brass Brass Brass Brass Metering Valve No Yes No Yes Stainless-Steel No Stainless-Steel Yes Stainless-Steel No Stainless-Steel Yes NOTE: All flow measurements must be on low-pressure side of pump. ! Threaded connection ! 1/8" model is stainless-steel Part No 8.705-047.0 8.705-048.0 8.902-426.0 8.707-314.0 Old No 140073 140075 ! 1/4" brass valve ! Valve cap included Description 1/8" Stainless-steel Connect 1/4" Connect Valve Assy, Water Blow-Out Valve Assy, Water Tank Blow-Out Install in-line in front of coil and use air pressure to blow water out of coil to prevent “freeze-up”. Easy-Start Val ! 1/8" FPT outlet ! Machined-brass housing ! Hose barb outlet ! Stainless-steel internal ! 200°F ! 8 GPM Part No 9.804-065.0 9.802-190.0 8.709-865.0 8.709-866.0 8.751-265.0 9.802-137.0 Old No 339004 339005 140352 Description Easy-Start Valve, 1/4" MPT, 5000 PSI Easy-Start Valve, 3/8" MPT, 5000 PSI Easy-Start Valve, 3/8" MPT, 4100 PSI Easy-Start Valve, 3/8" MPT, 3500 PSI Valve, 5/16" HB Outlet, 5000 PSI Hose Barb, 1/8" x 1/4" barb Page 133

UNLOADERS, INJECTORS, VALVES & GUAGES Easy-Start Valve ! 3/8" MPT inlet ! Hose barb outlet (8 mm) ! Machined-brass body ! Stainless-steel spring and ball Part No 8.709-867.0 Old No 339006 ! 3200 PSI ! 176°F ! 7.8 GPM Description Easy-Start Valve Pressure Gauges ! 5000 PSI cold water ! 1-3/4" gauge Part No 8.712-208.0 Description Pressure Gauge Kit Steel Utility Gauges ! Black lacquered steel case ! Bronze bourdon tube ! Dry gauge Part No 2" bottom mount 8.710-307.0 8.710-308.0 8.710-309.0 8.710-310.0 Old No 348552 348554 348558 348560 ! 1/4" NPT brass mounting stem ! Accuracy ± 3-2-3% Pressure Range 0-60 PSI 0-100 PSI 0-200 PSI 0-300 PSI ! 3/8" QC socket ! 3/8" QC plug Pressure Regulator Part No Old No 8.707-248.0 971443 ! Lowers city water pressure for better machine performance ! 10-125 PSI Description Pressure Regulator Stainless-Steel Pressure Gauges Fuel Oil Pressure Gauge Part No 8.700-738.0 Old No 079020 ! 0-200 PSI ! Perfect for testing burner pump fuel pressure Pressure Range 0-200 PSI ! AISI 304 stainless-steel case ! Bronze bourdon tube ! 99.5% pure glycerin filled ! PSI and bar dual scale ! 1/4" NPT brass mounting stem ! Convex magnifying lens for easy reading ! Steel needle and peg ! Accuracy ± 1.5% Part No Old No Corrosion-Resistant ABS Gauge ! Acid and alkali proof plastic case ! 1/4" NPT brass mounting stem Part No 8.710-291.0 8.710-293.0 8.710-294.0 8.710-295.0 8.710-296.0 8.710-297.0 8.710-299.0 Old No 348305 348307 348308 348312 348313 348314 348316 ! Accuracy – Dry: ±3-2-3% ! Accuracy - Filled: ±1.5% ! Bronze bourdon tube Pressure Range 0-100 PSI 0-200 PSI 0-300 PSI 0-1000 PSI 0-2000 PSI 0-3000 PSI 0-5000 PSI 348216 348220 348224 348230 348240 348245 348250 348255 348260 348262 348265 Pressure Range 2-1/2" Bottom Mount with Bronze Internals 8.710-270.0 8.710-272.0 8.710-273.0 8.710-276.0 8.710-278.0 8.710-280.0 8.710-281.0 8.710-283.0 9.804-017.0 8.710-286.0 9.804-001.0 2-1/2" Back Mount with Bronze Internals 8.710-250.0 8.710-254.0 8.710-256.0 8.710-257.0 8.710-258.0 8.710-259.0 8.712-149.0 8.712-150.0 8.710-262.0 9.804-013.0 348140 348150 348152 348154 348156 348158 348162 348165 8.710-228.0 348001 348090 0-100 PSI 0-200 PSI 0-300 PSI 0-500 PSI 0-1000 PSI 0-2000 PSI 0-3000 PSI 0-4000 PSI 0-5000 PSI 0-6000 PSI 0-10,000 PSI 0-100 PSI 0-500 PSI 0-1000 PSI 0-2000 PSI 0-3000 PSI 0-4000 PSI 0-5000 PSI 0-6000 PSI 0-6000 PSI 0-10,000 PSI Mounting Hardware for Back Mount Gauges 8.710-223.0 U-bracket 3-hole flange, mounted Page 134

UNLOADERS, INJECTORS, VALVES & GUAGES Stainless-Steel Pressure Gauges Part No Old No 348125 Pressure Range 2-1/2" Back Mount with Bronze Internals 8.710-246.0 8.710-228.0 348001 U-bracket 348090 30Hg - 0 Vacuum Guage Mounting Hardware for Back Mount Gauges 8.710-223.0 3-hole flange, mounted Part No 8.712-488.0* Pressure and Temperature Test Set Convenient test set provides both pressure and temperature check with one easy quick coupled connection at outlet of unloader or coil. ! Test Set 5000, 500°F thermometer 5000 PSI pressure gauge for systems up to 2000 PSI ! Test Set 10,000, 10,000 PSI pressure gauge for systems up to 5000 PSI Old No 426410 Description Temp Gauge +50° to 500°F *“Thermowell” to be used with dial thermometers in systems over 300 PSI. For best results, fill thermowell with liquid silicon or glycol to increase sensitivity and accuracy of readings. Thermowell for temperature gauge above ! Stainless-steel 3/4" MPT x 1/2" FPT ! Gives 2000 PSI collapse protection ! 1.75" immersion length Part No 8.712-489.0 Old No 426423 Description Thermowell for 8.712-488.0 Temperature Gauges Dial ther mom e ters ! 3" diameter dial — stainless-steel case ! Shatter-resistant polycarbonate lens ! Stainless-steel stem (2.5") ! 1/2" MPT connector ! Accuracy to within 3% of dial range (50-500 = ± 6.8°F) AMP and Voltmeters Part No 8.904-559.0 8.904-558.0 Old No 449045 449040 Description Test Set 5000 (0-2500 PSI systems) Test Set 10,000 (0-5000 PSI systems) Speedmaster Throttle Control Stop overworking the engine and pump during bypass. Decelerator reduces engine speed when pump head pressure drops below 215 PSI, reduces flow during bypass, slows recirculation heat build-up. ! 3500 PSI ! 300°F ! A major system saver for gas engine units ! Machined-brass body ! Stainless-steel gland components ! 1/4" male connect ! Viton seals ! 42" lined and covered control cable ! Engine speeds infinitely adjustable for “fine tuned” system performance Part No 8.903-840.0 Old No 339000A Description Throttle Control ! Designed for OEM or replacement ! Accuracy to ± 5% ! Metal case ! Rugged and weather-resistant ! Bright stainless bezel ! Utilize as constant monitor or as test instruments ! Fits 2-1/16" mounting hole Part No 8.701-686.0 8.701-687.0 8.701-688.0 8.712-159.0 Old No 091321 091323 091344 Description -15 to +15 Amps -20 to +20 Amps -60 to +60 Amps Voltmeter 120V Hour Meters for Gasoline Engines ! Elapsed time ! No battery required ! Digital quartz accuracy (± .02%) ! Extremely rugged and tamperproof ! Sealed from dirt and moisture ! Requires 2" panel cutout Part No 8.749-183.0 8.749-316.0 9.802-283.0 8.904-540.0 Description EL 5-80V AC/DC 50/60 Hz EL 24-277 AC/DC 50/60 Hz 115/240V AC – Rectangle Tach/Hour 12V DC w/ Magnet Tool Page 135

ENGINES, MOTORS & PULLEYS Briggs & Stratton Engines – Gasoline Briggs & Stratton’s top-of-the-line engines have proven performance in the pressure washer industry. They contain the power to complete any job faster and easier with less wear and tear on major engine components. ! Easy, quick-starting ! Large fuel tank Part No 8.754-819.0 8.715-067.0 Old No – 5-0316 HP 18 21 ! Super-quiet muffler ! OilGuard ® Shaft Diameter 1" 1" Starter Electric Electric low-oil shutdown Charge Rate 20 Amp N/A NOTE: Mufflers for the above engine are sold separately. See Briggs & Stratton Engine Parts section below. ! State-of-the-art carburetion system ! 30% quieter muffler than competition Part No 8.709-877.0 Old No 5-0313 HP 11 ! Cast/sintered iron sleeve ! OilGuard ® Shaft Diameter 1" Starter Recoil Fuel Tank Model No. N/A N/A Vanguard Vanguard low-oil shutdown Charge Rate N/A Fuel Tank Model No. 2 gal Vanguard OHV Vanguard Briggs & Stratton Engine Parts Genuine Briggs & Stratton replacement parts are available. Please provide engine model/type/code to ensure proper fit of replacement parts. ! Authorized manufacturer replacement parts Part No 8.701-826.0 8.701-820.0 8.701-821.0 8.701-823.0 8.718-021.0 Old No 091960 091950 091952 091954 Description Briggs 16/18 HP Vanguard, Oil Filter Briggs 5 HP Industrial, Air Filter Briggs 8 or 11 HP IC, Air Filter Briggs 16/18 HP Vanguard, Air Filter Sparkplug, Vanguard, RC12YC 8.701-826.0 8.701-823.0 ! Don’t settle for cheap imitations 8.701-820.0 Honda Engine Parts Original Honda replacement parts from the factory. Filters are a great add-on to every service order. ! Authorized manufacturer replacement parts ! Don’t settle for cheap imitations Part No 8.701-830.0 8.701-764.0 8.701-780.0 8.701-781.0 8.701-782.0 8.701-783.0 8.718-117.0 Old No 091970 091746 091775 091777 091779 091779A Description Honda 18/20 HP, Oil Filter Honda GX160, Air Filter Honda GX240/270, Air Filter Honda GX340, Air Filter Honda GX610/620, Air Filter (old style) Honda GX610/620, Air Filter (new style) Honda GX All, Sparkplug 8.701-782.0 8.701-783.0 8.701-764.0 8.701-830.0 Page 136

ENGINES, MOTORS & PULLEYS Engines - Kohler Lombardini – Diesel Kohler Lombardini Water Cooled Diesel Engines provide superior power and quiet operation. ! Diesel powered !Water cooled Part No 9.802-327.0 Old No 5-0407 HP 27 Shaft Diameter 1-1/2" Electric Starter N/A Charge Rate No Fuel Tank Model No. LDW1003, Water Cooled Engine Parts - Kohler Lombardini Factory direct Kohler parts. Voltage Regulator - Heavy-duty 15 Volt ! Authorized manufacturer replacement parts 8.717-912.0 Part No 8.717-912.0 8.717-915.0 8.717-909.0 Old No 74-2175107 74-2175164 74-2175045 Description Oil Filter Air Filter Fuel Filter 8.717-915.0 Engine Model LDW602/903/1003 LDW602/903/1003 LDW602/903/1003 Part No 9.802-531.0 Old No 860273 Description Regulator, Voltage 15 Volts ! Eliminates need for battery on 12 volt recoil Hot-Water Washers Starter Solenoid - 12V DC Keyed Ignition Switch – 12V DC Universal type used on many lawn and garden tractors and mowers. ! Double terminal – 5/16" – 24 studs ! Same as used on 16 HP B & S Vanguard engines ! Rated for intermittent duty (i.e. for starting small gasoline engines) Part No 8.701-691.0 Old No 091357 Description 12V DC Starter ! Universal style/5 pole ! Off-On-Start (spring back to On) ! Panel nut and star-lock washer ! Two keys included ! Has two auxiliary circuits ! Universal — used for small engine controls on many lawn and garden tractors, mowers Part No 8.701-689.0 8.701-690.0 Old No 091350 091351 Description Keyed Ignition Switch, 5 pole Keyed Ignition Switch, 6 pole Baldor Motors – C-Face Open Drip Proof (ODP) Built to “industrial” specifications. “S” indicates motor has on/off switch. “B” indicates motor is black. Part No 8.709-723.0 8.709-727.0 8.709-728.0 8.709-730.0 8.709-731.0 8.709-733.0 8.709-734.0 9.107-929.0 Old No Single-Phase Motors 8.709-754.0 337323B 337264B 337268B 337269B 337271B 337272B 337273B 337275B Motor HP/S 3.0 3.0 4.0 4.0 5.0 5.0 6.0 7.5 2 RPM 3450 1725 1725 3450 1725 3450 1725 1725 1725 Shaft Dia 5/8" 5/8" 5/8" 5/8" 1-1/8" 5/8" 1-1/8" 1-1/8" 5/8" Bolt Circle 5-7/8" 5-7/8" 5-7/8" 5-7/8" 7-1/4" 5-7/8" 7-1/4" 7-1/4" Frame C-Face 56/56C 184CZ/56C 182TCZ/56C 56/56C 184TC 56HCY/56C 213C/182TC 215C/182TC 56C Page 137 Full Load Amps 13.7/12.5 32/16 17.5/16 38/21/19 25/23 24/23 26 36/33 16.4/8.2 Voltage 208/230 115/230 208/230 115/208/230 208/230 208/230 230 208/230 115/230

ENGINES, MOTORS & PULLEYS Baldor Motors – Open Drip Proof (ODP) Industrial-grade motors built specifically to meet or exceed the demands of the pressure washer industry. ! The industry standard ! U.L. Listed ! Any Baldor motor available 1 Phase 56 Frame Part No 8.754-709.0 8.715-090.0 8.709-751.0 8.715-146.0 8.715-091.0 8.709-759.0 8.709-757.0 9.802-336.0 8.715-163.0 8.715-165.0 9.804-516.0 9.107-929.0 8.715-158.0 8.715-144.0 8.715-142.0 9.802-337.0 8.715-102.0 8.715-168.0 8.725-973.0 8.709-793.0 Old No Single-Phase Motors 8.754-710.0 5-10081 337320 5-1053E 5-10104 337331 337329 5-10401 5-1080 5-1082 Motor HP 2.0 2.0 3.0 3.0 5.0 5.0 5.0 5.0 6.2 8.2 8.2 1.5 2 2.3 5 5 6.2 7.5 8.2 8.2 10 Three-Phase Motors 8.751-004.0 8.751-014.0 8.750-999.0 8.751-009.0 8.751-010.0 8.751-005.0 8.751-011.0 8.751-008.0 337534 6.2 7.5 8.2 5 7.5 8.2 10 20 Voltage 115/230V 115V 208/230V 115/230V 208/230V 230V 208/230V 208/230V 230V 208V 230V 115V 115/230V 115V 200V 230V 200V 230V 230V 230V 230V RPM 3470 1750 1725 1725 3450 1725 3450 1725 1725 1725 1725 1725 1725 1750 3450 1725 1725 1725 3450 1740 1725 208/230/460 1725 208/230/460 1770 230/460V 575V 575V 575V 575V 575V 1725 1750 1770 3450 1770 1765 1 Phase 184T Frame Shaft Dia Frame 5/8" 5/8" 5/8" 1-1/8" 3/4" 7/8" 5/8" 1-1/8" 1-1/8" 1-3/8" 1-3/8" 5/8" 5/8" 5/8" 3/4" 1-1/8" 1-1/8" 1-3/8" 1-1/8" 1-3/8" 56C 56C 56HC 184T 56CZ 184TCZ 56 184T 184TZ 215 215 56C 56C 56C 56CZ 182TZ 184TZ 215TZ 184TZ 215T 215TFC 1-1/8" 1-3/8" 1-3/8" 1-1/8" 1-3/8" 1-1/8" 1-3/8" 1-5/8" 184T 213T 215 184T 213T 184T 215T 265T 36B101Y483H2 20.4/19.4/9.7 N/A 5.2 7.8 7.4 10 18.9 NOTE: Amp draw ratings require adequate wire size and full voltage to apply. Full load Amp ratings apply only when full rated. EM3218T-5 EM3311T-5 36G548S515G1 EM3313T-5 EM2515T-5 32/16 35L3583214G1 36G472W849 23-21 25/23 36J185X288G1 N/A N/A 13.6 16.4/8.2 18 24.5 23 30.7 31 32.8 34.5 35R735R770G1 EPCL1322M 35Q899R328G1 35V142R510G1 36J800X811 36J468Y852 37H404W885G1 36E002Y277G1 37L276Y712G1 Full Load Amps Model 35R613R717G1 35Q371R021G1 35M895T356 3 Phase 184T Frame Page 138

ENGINES, MOTORS & PULLEYS Motors – Totally Enclosed Fan Cooled (TEFC) Featuring heavy-gauge steel frames, ball bearings, welded base, and “snap-action” starting for reliability. Built to industrial specifications. Part No 8.709-774.0 8.709-779.0 8.709-784.0 8.709-737.0 8.723-881.0 Old No Single-Phase Motors 8.709-767.0 337352 337363 337374 337380 337280 Three-Phase Motors 8.751-016.0 8.751-318.0 HP RPM 1.5 2.0 3.0 5.0 7.5 2 10.0 5 1725 3450 3450 1725 1800 1800 1725 1725 NOTE: Some of these motors will require two days from order to shipping. Shaft Dia 5/8" 5/8" 5/8" 1-1/8" 1-1/8" 5/8" 1-3/8" 1-1/8" Bolt Circle Frame / C-Face 5-7/8" 5-7/8" 5-7/8" 7-1/4" 7-1/4" 56C 56C 56C 184TC 215C 56C 215T 7-1/4" 184TC Full Load Amps 12/6 17/8.5 13.8/12.5 23 34.1/30.8 7.6/8.8 29-26/13 13.4/6.7 Voltage 115/230 115/230 208/230 230 208/230 115/230 208-230/460 230/460 Motors - A.O. Smith – Pressure Washer Excellent power efficiency. “S” indicates motor has on/off switch. Part No TEFC Motor 8.709-798.0 Old No Single Phase Motors 8.709-808.0 337438 337407T Motor HP/S* RPM 6.0 1.5 3450 1750 Shaft Dia Bolt Circle 7/8" 5/8" 5-7/8" 5-7/8" Frame / C-Face 56Y 56C/56C Full Load Amps 22.0 15.0/7.5 Voltage 208/230 115/230 Motors - WEG – Pressure Washer Built to industrial specifications. Part No Moto HP Three Phase Motors 8.755-598.0 8.755-599.0 8.755-600.0 8.755-601.0 8.755-606.0 8.756-431.0 8.755-604.0 8.755-605.0 8.756-425.0 8.756-429.0 5 10 15 20 7.5 20 7.5 10 5 15 RPM 1760 1770 1775 1770 1770 1800 1770 1770 1800 1800 Shaft Dia Frame 1-1/8" 1-3/8" 1-5/8" 1-5/8" 1-3/8" 1-5/8" 1-3/8" 1-3/8" 1-1/8" 1-5/8" 182/4T 213/5T 254/6T 254/6T 213/5T 254/6T 213/5T 213/5T 182/4T 254/6T Voltage 200 200 200 200 200 208/230 208/230 208/230 208/230 208/230 Full Load AMPS 14.6 28.5 42.8 57.5 21.3 55.3-50.0/25.0 20.5-18.5/9.25 27.4-24.8/12.4 14.0-12.7/6.33 41.1-37.2/18.6 Page 139

ENGINES, MOTORS & PULLEYS Small Engine Test Equipment ! Connects between plug and plug wire ! Totally contained spark ! Engine will run with tester attached ! Neon test light verifies proper ignition ! Handy tool allows safe, easy visual inspection of ignition output Part No 8.701-680.0 Old No Description 091126 Spark Tester ! Designed for small engines ! 2-1/2" dial reads up to 300 PSI ! 12" flexible hose to reach spark plug holes ! Adapters for 14mm and 18mm spark plug holes ! Built-in pressure holding/release valves Compression Tester Couplers Built by Browning or Lovejoy Listed as individual coupler sections (half) to allow flexibility in design. For complete coupler select: Bore size for motor + Bore size for pump + Spider = Complete Coupler Spark Tester NOTE: Select halves from same series as listed in groups below (e.g. All “090/095”, “099/100”) Part No 8.709-640.0 8.709-634.0 8.709-635.0 8.709-639.0 Part No 8.701-682.0 Old No Description 091133 Comp Tester ! Terrific service aid for 1-cylinder engines ! Just hold built-in antena near spark plug ! Two scales: 0-5,000 RPM or 0-15,000 RPM ! Solid-state electronics ! Requires 9V battery (not included) ! Excellent for setting GPM on pressure washers; accuracy within 2% of full scale Wireless Tachometer Part No 8.701-681.0 Old No 091132 Description Wireless Tach Old No 336031 336050 336044 336045 336049 8.709-638.0 8.709-625.0 8.709-627.0 8.709-628.0 8.709-629.0 8.709-632.0 8.709-637.0 8.709-633.0 336038 336048 336037 336039 Description 090/095 Series: Up to 3 HP Electric or 4 HP Gas 8.709-620.0 Coupler Half Coupler Half Coupler Half Coupler Half Bore 24mm 5/8" (090) 3/4" (090) 15/16" (090) Buna Spider for 090 (STD) 099/100 Series: Up to 5-7 1/2 HP Electric or 5-13 HP Gas 8.709-626.0 336039A 336040 336042A 336047 336043 Coupler Half Coupler Half Coupler Half Coupler Half Coupler Half Coupler Half Coupler Half Coupler Half 3/4" (100) 15/16" (099) 20mm(100) 24mm (099) 24mm (100) 1" (100) 1-1/8" (100) 1-3/8" (100) Buna Spider for 099/100 (STD) Pulleys Fits Interpump, General and Admiral XLS, XDS Series pumps, plus XD3040, XD3047, XD3055 and XD3065. Old No ! Double groove ! 24mm bore ! 2 x A groove Part No 8.711-115.0 8.711-116.0 8.711-117.0 376304 376305 376306 OD 4.0" 5.5" 6.3" Reference / Calculation Guide Conversion Factors 1 inch = 25.4 mm 1 cm = 0.394 inch 1 gal H20 = 8.33 lbs 1 oz = 23.35 gram Horsepower (HP) Equations GPM x PSI 1460 HP = 1 gal = 3.79 liter 1 liter = 0.2642 gal 1 kg = 2.205 lbs 1 KW = 1.341 HP PSI = HP x 1460 GPM GPM = HP x 1460 PSI Page 140 How fast do I turn my pump to give me a desired GPM? Required RPM = (desired GPM x Rated RPM) Rated GPM What size pump pulley do I use to get a certain RPM? Pump Pulley Diameter = Motor Pulley Diameter x Motor RPM Pump RPM

ENGINES, MOTORS & PULLEYS V-Belts - Super “Gripnotch” Old No Part No ! Full line of belts ! “V”-notched for longer life and better performance 8.715-669.0 8.710-727.0 8.715-672.0 8.715-673.0 9.804-026.0 9.803-896.0 9.802-407.0 9.803-683.0 9.802-408.0 9.802-409.0 9.802-410.0 8.715-682.0 9.802-411.0 9.802-412.0 9.802-413.0 9.802-414.0 9.802-415.0 9.802-416.0 8.715-698.0 8.710-745.0 9.802-418.0 8.715-701.0 9.802-419.0 8.710-754.0 9.802-421.0 8.710-756.0 8.715-706.0 8.715-708.0 8.715-710.0 369128A 369130A Pulleys 369136A 5-602038 5-602041 5-602042 5-604022 369134B 369135B 369136B 369137X 369138B 369140B 369142B 369143B 369144B 369145B Size AX26 AX28 AX29 AX30 AX31 AX33 AX34 AX35 AX36 AX37 AX38 AX41 AX42 BX22 BX32 BX34 BX35 BX36 BX37 BX38 BX39 BX40 BX42 BX43 BX44 BX45 BX46 BX48 BX51 High-quality cast-iron pulleys, Cast design, All sizes available Old No Part No AK pulley 2AK pulley BK pulley 2BK pulley Pulley Bushings Split taper “H” For use with “H” sheaves, above. Old No Part No Motor / Engine Bushings 9.802-397.0 ! Split taper, malleable iron ! Keyed to both shaft and hub ! Highest torque carrying capacity 9.803-897.0 8.715-633.0 9.802-399.0 9.802-400.0 9.802-401.0 8.715-638.0 Pump Bushings 8.711-118.0 8.711-119.0 8.711-121.0 8.711-122.0 8.711-123.0 8.711-124.0 8.711-125.0 Size H x 5/8" H x 3/4" H x 7/8" H x 1" H x 1-1/8" H x 1-3/8" 5-511139 H x 1-3/8"-6B, Spline 376320 376322 376324 376325 376330 376332 376335 H x 20mm H x 22mm H x 24mm H x 25mm H x 30mm H x 32mm H x 35mm 3TB pulley 8.715-517.0 8.715-519.0 9.802-368.0 9.804-028.0 8.715-524.0 8.715-527.0 8.715-530.0 9.803-898.0 9.802-369.0 8.715-538.0 8.715-539.0 9.803-298.0 9.802-371.0 9.804-047.0 8.715-546.0 8.715-548.0 8.715-549.0 9.802-372.0 8.715-555.0 9.802-374.0 9.802-375.0 9.803-548.0 8.715-560.0 9.802-377.0 9.802-379.0 8.715-566.0 8.710-819.0 8.710-823.0 8.710-831.0 8.715-567.0 8.710-837.0 8.710-841.0 8.715-568.0 8.715-570.0 8.715-571.0 9.802-380.0 8.715-573.0 8.710-858.0 8.715-576.0 8.710-811.0 9.802-383.0 9.802-384.0 9.802-385.0 8.715-582.0 8.715-583.0 9.802-386.0 9.802-387.0 8.715-588.0 9.804-060.0 9.802-388.0 8.715-591.0 9.802-389.0 8.715-593.0 9.802-391.0 8.715-598.0 9.802-392.0 9.802-394.0 *x 5/8" Bore Page 141 5-40102158 5-40102358 Size 5-40103201 5-40103401 5-40103901 5-40107401 5-40108401 5-40108901 5-40203001 5-40203201 5-40203401 5-40204401 5-40204901 5-40205101 5-40205401 5-40206401 5-40207401 5-40208401 5-40209401 AK21* AK23* AK25* AK28* AK30H AK32H AK34H AK39H AK74H AK84H AK89H 372586 372596T 372650T 5-40405701 372695 372704T 5-40406501 2AK30H 2AK32H 2AK34H 2AK44H 2AK49H 2AK51H 2AK54H 2AK64H 2AK74H 2AK84H 2AK94H BK30H BK32H BK36H BK40H BK45H BK47H BK52H BK57H BK60H BK62H BK65H BK70H BK75H BK80H BK85H 372799T 372499T 5-40505001 5-40506501 5-40506701 372774T 372790T 5-406040 5-407034 5-407040 BK100H 2BK32H 2BK34H 2BK36H 2BK40H 2BK45H 2BK47H 2BK50H 2BK52H 2BK60H 2BK62H 2BK65H 2BK67H 2BK70H 2BK80H 2BK90H 2BK100H 2TB40 3TB34 3TB40 OD 2.10" 2.30" 2.50" 2.80" 3.05" 3.25" 3.45" 3.75" 7.25" 8.25" 8.75" 3.05" 3.25" 3.45" 4.25" 4.75" 4.95" 5.25" 6.25" 7.25" 8.25" 9.25" 3.30" 3.35" 3.75" 3.95" 4.25" 4.45" 4.95" 5.45" 5.75" 5.95" 6.25" 6.75" 7.25" 7.75" 8.25" 9.75" 3.35" 3.55" 3.76" 3.95" 4.25" 4.45" 4.75" 4.95" 5.75" 5.95" 6.25" 6.45" 6.75" 7.75" 8.75" 9.75" 4.35" 3.75" 4.35"

BURNERS Oil Burners - 115V / 230V ! .4 to 3 GPH firing rate ! 6-1/4" blower fan 115V and 230V ! 3,450 RPM pump/blower motor ! Solid-state ignition ! Beckett “CleanCut” fuel pump with oil valve ! Air tube 2-3/4" ! UL-recognized Part No 8.709-325.0 8.709-326.0 Old No 307032 307036 Beckett Burner Chart BURNER Part No 8.709-326.0 8.709-325.0 8.709-327.0 8.709-328.0 8.717-071.0 8.717-090.0 MOTOR Part No 8.750-518.0 9.802-642.0 9.802-638.0 9.802-638.0 8.701-090.0 8.701-093.0 Old No 307036 307032 307059 307061 N/A N/A Description AFG / 240V AC AFG / 120V AC ADC / 13.5V DC - W/O ICB* ADC / 13.5V DC - W/ICB SM / 120V SM / 240V Becket No. VMG202 VMG902 VMG504 VMG505 HO1501 HO1301 Old No 22825U 079602 079613 079613 079604 079609 Becket No. 21805U 52145U 52145U 2364U 21344U BLOWER WHEEL Part No 9.802-649.0 9.802-649.0 9.802-636.0 9.802-636.0 9.803-057.0 9.803-057.0 Old No 079517 079517 079518 079518 079515 079515 Becket No. 2999U 2999U 2999AU 2999AU 2383U 2383U IGNITOR ASSEMBLY Old No Part No 8.751-780.0 9.802-647.0 8.751-784.0 8.751-784.0 9.803-060.0 8.751-781.0 079669 079682 Description Beckett AFG 115 Beckett AFG 230 Becket No. 5199701U 51771U 5218301U 5218301U 51824U 5199702U BURNER Part No 8.709-326.0 8.709-325.0 8.709-327.0 8.709-328.0 8.717-071.0 8.717-090.0 Old No 307036 307032 307059 307061 N/A N/A * Ignition control board FUEL PUMP Part No 9.802-644.0 9.802-645.0 9.802-562.0 9.802-562.0 9.802-645.0 9.802-644.0 Old No 079642 079641 079643 079643 079641 079642 * Ignition control board Becket No. 2184403U 2184405U 2184402U 2184402U 2184405U 2184403U SOLENOID W/CORD SET Old No Part No 8.900-082.0 8.900-081.0 8.900-080.0 8.900-080.0 8.900-081.0 8.900-082.0 079054X 079053X 079050X 079050X 079053X 079054X * Ignition control board Becket No. N/A N/A N/A N/A N/A N/A TUNE UP KIT Part No 8.723-715.0 8.723-715.0 8.723-715.0 8.723-715.0 8.723-715.0 8.723-715.0 Description AFG / 240V AC AFG / 120V AC ADC / 13.5V DC - W/O ICB* ADC / 13.5V DC - W/ICB SM / 120V SM / 240V Becket No. VMG202 VMG902 VMG504 VMG505 HO1501 HO1301 Old No N/A N/A N/A N/A N/A N/A * Ignition control board Becket No. 578730 578730 578730 578730 578730 578730 Page 142

BURNERS Oil Burner - 14V ADC ! 14V, solid-state ignition ! 1/6 HP ! 3,450 RPM ! 4-1/4" fan ! Beckett “CleanCut” fuel pump with oil valve ! Max rate 2.5 GPH Part No 8.709-327.0 8.709-328.0 Old No 307059 307061 Description Beckett 13.5V Beckett 13.5V Oil Valve Yes Yes Electric Eye – Yes Motor RPM 3450 3450 NOTE: Prop er operation requires an engine with 16+ Amp alternator and deep-cycle battery on nightly, overnight recharge Flex Couplings Old No Part No 9.802-648.0 9.803-058.0 9.802-637.0 079520 079522 079524 Beckette Part No 2454 2433 Description 5/16 “A”– (AFG) 5/16 “S”– (SF/SM) 2140501U 1V DC ADC Beckett Misc. Parts Part No Old No 9.802-651.0 8.701-059.0 8.701-056.0 8.701-063.0 8.723-912.0 8.701-070.0 9.802-653.0 9.802-671.0 8.701-085.0 8.701-134.0 8.701-132.0 9.802-676.0 8.701-137.0 8.701-133.0 8.701-106.0 8.701-074.0 079530 079542 079543 079560 079562 079592 079595 079677 079674 079654 079684 079675 079629 079573 Beckett Part No Description 578726 SDC 149 5432 5850 3616 3416 5877 5717 (51400) 51304 31404 7006U 7556A0000 3245 AF90 5151501 Burner Gasket AFG 120V Electrode Insul Assy Electrode Clamps (ALL) Flange, w/ Gasket (ALL) Flange, Split UnI A&S Gasket, Universal AMF Gasket, Unit Mtg Burner Housing AFG/ADC Knurled Nut Kit ADC Transf Mtg Gasket AFG Transformer Clip Cadcell Flame det Primary Control, 14V DC Transformer Spring Air Tube w/o Head Air Band (3 x 92 AFG) Controller and Contractor Tool - Genisys™ Advanced burner control, 120V AC primary safety control for residential and light commericial oil burners. Part No 8.751-335.0 8.726-018.0 Description Genisys Controller Genisys Contractor Tool Electrode/Insulator Assembly Part No 9.802-668.0 8.717-978.0 9.802-669.0 9.802-670.0 Old No 079534 Beckett Part No 5780 578728 Description Std to 9" AFG, SM, SF ADC Electrode w/ Contact, PR Electrode Kit Page 143

BURNERS Oil Burners Part No 8.709-317.0 8.709-318.0 8.709-319.0* Old No 307000 307003 307007 Description 115V AC Burner w/ Oil Valve 230V AC Burner w/ Oil Valve 12V DC Burner w/ Oil Valve *Prop er operation requires an engine with 16+ Amp alternator and deep-cycle battery on nightly,overnight recharge 115V and 220V Wayne Burner Chart ! 75 to 3 GPH firing rates ! Solid-state ignition (low Amp) ! High-volume 6-1/4" blower on 220V unit, 5-3/16" blower on 110V unit ! 3,450 RPM pump/blower motor 115V Wayne Burner Chart Part No 8.709-317.0 Ignitor 8.700-802.0 / 079111 Fuel Pump 8.700-749.0 / 079030 220V Wayne Burner Chart Part No 8.709-318.0 Ignitor N/A / N/A Fuel Pump 8.700-749.0 / 079030 Description Wayve 220V Transformer 8.700-809.0 / 079123 Solenoid Valve 8.700-780.0 / 079063 Motor 8.701-094.0 / 079611 Blower Wheel 8.700-731.0 / 079006 Electrode Assembly Tune Up Kit 8.700-770.0 / 079052 Description Wayve 115V Transformer 8.700-804.0 / 079115 Solenoid Valve 8.700-779.0 / 079030 Motor 8.701-095.0 / 079612 Blower Wheel 8.700-730.0 / 079005 Electrode Assembly Tune Up Kit 8.700-770.0 / 079052 ! “A”-type Suntec fuel pump ! 3-3/4" air tube with adjustable flange for maximum versatility ! UL-recognized 8.700-774.0 / 079056 8.700-774.0 / 079056 NOTE: 8.700-721.0 – Coupling for 8.700-740.0 FASCO motor used on MET to FASCO converted burner 8.700-720.0 – Adaptor Bushing to allow MET blower wheel to work with FASCO motor 8.700-740.0 – Conversion Kit — Use MET to FASCO conversion kit if 12V burner motor cannot be identified. The kit contains the following parts: 8.700-739.0 Motor; 8.700-720.0 Adaptor bushing; 8.700-682.0 Adaptor Plate; 8.700-721.0 Coupling; 8.700-691.0 Screws (2); 8.700-104.0 Nuts 12V Wayne Burner Chart ! 12V solid-state ignitor Part No 8.709-319.0 Ignitor 8.700-807.0 / 079120 ! 3,450 RPM fuel pump Description Wayve 12V Transformer N/A / N/A Motor 8.700-739.0-FASCO / 079021 8.750-715.0-MET to FASCO 079021X Blower Wheel 8.700-727.0 / (079003) FASCO - 2.44" W x 2.53" T, 5/16" shaft, 8.700-728.0 (079003A), MET 3.44" W x 4.25" T Electrode Assembly 8.700-770.0 / 079052 Tune Up Kit 8.700-774.0 / 079056 with 8.700-721.0 coupling for converting from MET to FASCO NOTE: 8.700-721.0 – Coupling for 8.700-740.0 FASCO motor used on MET to FASCO converted burner 8.700-720.0 – Adaptor Bushing to allow MET blower wheel to work with FASCO motor 8.700-740.0 – Conversion Kit — Use MET to FASCO conversion kit if 12V burner motor cannot be identified. The kit contains the following parts: 8.700-739.0 Motor; 8.700-720.0 Adaptor bushing; 8.700-682.0 Adaptor Plate; 8.700-721.0 Coupling; 8.700-691.0 Screws (2); 8.700-104.0 Nuts Page 144 ! .5 to 2.75 GPH capacity with oil valve

BURNERS Blower Wheel Old No Part No 8.700-730.0 8.700-731.0 8.700-726.0 8.700-727.0 8.700-728.0 079005 079006 078999 079003 079003A Wayne Part No Description 20288/SER 21854/SER 20673 21427/SER3 21427 5-3/16" x 3-7/16" 6-1/4" x 4-3/16" 4-1/4" x 3-1/8" 12V (Fasco) (MET) Shaft Size 1/2" 1/2" 1/2" 5/16" 1/2" Common Parts – Beckett & Wayne Part No 8.701-054.0 9.802-667.0 8.701-053.0 8.700-784.0 8.700-785.0 8.700-738.0 8.700-768.0 8.705-063.0 Old No 079526 079058 079525 079066 079067 079020 079051 140150 Description Oil Line, 6.5", Copper Oil Line, 8", Copper Oil Line, 9.5", Copper Brass 90° Elbow 1/8" flare, 1/8" MPT Brass 90° Elbow 3/16" flare, 1/8" MPT Oil Pressure Gauge 0-200 PSI (28737-1) Nozzle Adapter Straight Thru Double Nipple 1/8" x 1/8" Oil Line Brass Elbow Wayne Burner Parts Old No Part No 8.700-774.0 8.700-770.0 8.700-743.0 8.700-754.0 8.700-692.0 8.700-735.0 8.700-736.0 8.700-776.0 8.700-777.0 8.700-733.0 8.700-734.0 8.700-729.0 8.700-732.0 8.700-714.0 8.700-680.0 079056 079052 079024 079034 078785 079014 079016 079059 079060 079010 079011 079004 079007 078979 078752 Wayne Part No Description 31156 14733-001 14734-002 12945 14344 12484 4725 2689 13279 13360 13038 2668 2669 31702-014 Wayne Burner Tune-up Kit Electrode Assembly (Pair) with Buss Bars – G shape Buss Bar – G shape Burner Gasket Universal Gasket Burner Housing (E-Series) Burner Flange “F” Flex Coupler A Fuel Unit Coupler End (J Pump 7/16") Trans Clip Screw Trans Clip Outer Air Band (8 Hole) Inner Air Band (8 Hole) Gun Assy, F/307007 Nzl Adapter w/legs MSR/DC Burner Motors Old No Part No 9.802-642.0 8.750-518.0 8.700-739.0 9.802-638.0 8.701-090.0 8.701-091.0 8.701-093.0 8.701-094.0 8.701-095.0 8.700-740.0 Universal 8.700-741.0 8.700-744.0 079602 079021 079613 079604 079605 079609 079611 079612 079021X 079022 079025 Capacitor Y Y RPM 3450 HP 1/7 Y 2850/3450 1/7 4500 3450 3450 3450 3450 3450 3450 1/5 1/7 1/4 1/4 1/4 1/5 1/5 Kit, 12V DC/MET to Fasco 3450 3450 1/7 1/5 48M 48N 110-60 Hz 110/240V Page 145 Flange 48M 48M 48M 48M 48N 48N 48N 48N 48N Voltage 115V Wayne / Beckett 20627 / 21805U 220V 12V DC 13.5V 115V 12V 115/240V 240V 115V N/A / N/A 21993-005 / N/A N/A / 52145U N/A / 2364U N/A / 52146U N/A / 21344 21328 / 21173U 20554 / 2900U 48M 5.75" Dia. Capacitor Start 48N 7.25" Dia.

BURNERS Beckett Tune-Up Kit Fits all Beckett Burners with 3" or 3-5/8" air tube. ! Kit contains: ! Four Becket electrodes ! Two couplings ! One fuel line ! T-gauge CleanCut Fuel Pump Simple design provides faster cleaning, more reliable cut-offs, and cut-ons. Cleaner operation — less soot. More reliable — fewer moving parts. Reduced motor load in start-up. Higher capacity — 4 GPH at 100 PSI. Part No 8.723-715.0 Description Beckett Burner Tune-up Kit ! 100-200 PSI — factory set 100 PSI ! Inlet pressure 10 PSI ! Rated speed 3,600 RPM ! Includes built-in solenoid w/ cord set Part No Blower Wheels 9.802-645.0 9.802-644.0 9.802-562.0 9.802-646.0 Old No 079641 079642 079643 079690 Description 110V 220V 12V Valve Stem Kit (21877U) Part No 9.803-057.0 9.802-649.0 9.802-636.0 Description 6-1/4" D x 3-7/16" W 4-1/4" D x 2-1/2" W 4-1/4" D x 2-7/16" W Shaft Size 1/2" 1/2" 5/16" Burner Ignitors SF-SM AFG ADC Fuel Conditioner and Soot Remover Red Devil eliminates soot build-up. ! Easy to use — just add to burner fuel ! Keeps burner at top efficiency ! 1 oz. per 10 gallons Part No 8.704-625.0 8.704-626.0 8.719-158.0 Old No 112057 112059 9-4007 Description Pint (16 oz) Quart Soot-O-Magic Stick ! Solid-state technology ! 14,000V spark ! Only .35 Amp @ 110V ! 1.7 lbs Part No 9.802-647.0 8.751-785.0 9.803-060.0 8.701-140.0 *Complete with timer Old No 079669 079707 079682 079687 Beckett Part No Mounting AFG/Lo Amp 51771U 517780 51824U 51779U SDCw/ Con BD SM/SF SDCw/o CB Volt 120V 12V DC 120V 12V DC Fuel Pumps ! Use with single- or dual-line systems Part No Standard Pumps 8.700-749.0 8.700-789.0 8.700-756.0 8.700-757.0 8.700-748.0 Old No 079030 A2VC7118 079031 079037 079028 Pumps with Solenoid 8.700-758.0 8.700-759.0 8.700-760.0 079038 079038-110 079038-220 Pump Replacement Parts 8.700-764.0 8.700-772.0 8.700-765.0 079044 079055 079045 Suntec PN A2VA7116 A1YA7912 A2YA7916 A2RA7710 A2VA3106-N221R w/12V A2VA3106-N621L w/110V A2VA3006-N721RS w/220V3 3715732 (A2VA 7116) 3715744 (A2AVA 7916) 3779801 Gasket Cover Page 146 ! Pressure adjustment valve GPH 3 3 7 7 RPM 3450 3450 1725 3450 Rotation RH LH RH RH RH 4 3 3450 3450 3450 Pump Fuel Screen Pump Fuel Screen RH RH RH

BURNERS Burner Transformers ! 10,000V spark ! 2.2 Amp @ 120V ! 8.5 lbs ! Traditional copper-wire wound Part No 9.802-661.0* 8.701-125.0* 9.803-055.0* * Bottom mount Old No 079668 079662 079665 Beckett Part No Mounting AFG 51343U 21376U 21176U S-SF-SR-SM SM Volt 240V 120V 240V Burner Ignitors ! Solid-state technology ! 14,000V spark ! Only .35 Amp @ 120V ! 1.7 lbs Part No 8.700-802.0 8.700-803.0 8.700-800.0 8.700-801.0 8.700-807.0 8.700-820.0 Base Plates for Ignitors Fuel Solenoid Valve - 12V DC KIP ! Brass body ! 12V DC coil ! 1/8" FPT I/O ports ! Conduit connector ! 5/64" orifice = 6 watt Part No 8.701-120.0 Part No 8.701-116.0 8.701-117.0 8.701-118.0 8.701-119.0 Old No 079644 079645 079646 079647 Description A, Trans/Ign S, Trans/Ign E, Trans/Ign M, Trans/Ign Old No 079652 Description Fuel Solenoid Valve Old No 079111 079113 079107 079109 079120 079152 Wayne Part No Mounting 101122/001 101121/001 31813-002 31812-002 31812-003 31813003 Side/EH-EHA, France Back/M-MSR, France Volt 120V 120V Side/EH-EHA, Allanson 220V Back/M-MSR Rear Mount, Carlon Side Mount(E) 220V 12V 12V Smoke Tester – Diagnostic Tool Nozzle Accessories The smoke tester gives you the ability to measure smoke (soot) density and adjust air flow and fuel pressure to optimize burner performance. ! A properly tuned burner: ! Heats water more efficiently ! Doesn’t build up soot in the coil ! Doesn’t pollute the air ! Keeps your customers happy Part No 8.700-849.0 Old No 079221 Description Nozzle Tray (Metal) (Open Top, 55-Compartment, Plastic) ! A tool that should be used by every serviceman in the industry Part No Burner Transformers ! 10,000V spark ! 2.2 Amp @ 120V ! 8.5 lbs ! FranceFormer Part No 8.700-804.0 8.700-806.0 8.700-809.0 8.700-810.0 Old No 079115 079117 079123 079124 Wayne Part No Mounting Volt Side/EH-EHA 120V 23101/E 23101/M 23103/E 23103/M Back/M-MSR 120V Side/EH-EH 230V Back/10KVA 240V 8.712-507.0 8.712-506.0 Old No 449020 449019 *40 sheet (10 tests per sheet) Description Smoke Tester Filter Paper Refill* Page 147

BURNERS Oil Solenoid Valve ! Unitized mounting on Suntec fuel pumps ! 1/8" FPT inlet ! 300 PSI ! Uses standard Suntec coil Valves - Honeywell Gas Part No Natural Gas – Small Millivolt Valve Old No 9.803-615.0 9.803-617.0 9.803-611.0 9.803-614.0 8.718-116.0 Part No 8.700-779.0 8.700-780.0 8.700-782.0 8.700-811.0 8.700-812.0 8.900-081.0 8.900-082.0 8.900-080.0 9.802-640.0 9.802-641.0 8.700-794.0 8.700-795.0 8.900-079.0 Old No 079062 079063 079064 079125 079126 079053X 079054X 079050X 079096 079097 079098 079099 079047 Description 110V Oil Valve – R642 220V Oil Valve – R753 12/24V Oil Valve – R261 Flow-Thru Connector Bolt Aluminum Seal Washer 110V Coil w/ Cord Set 230V Coil w/ Cord Set 12/24 Coil w/ Cord Set 115V Coil w/o Cord Set 230V Coil w/o Cord Set 12/24V DC Coil w/o Cord Set Cord Set Only 8mm Nut for Old Style Coil Gas Burner Rings – N/G or L/P Gas Jets The standard for gas-fired pressure washers. Impinged jet burner rings offer the most efficient utilization of gas for heating water. Gas Burner Ring Part No 8.710-204.0 8.710-207.0 8.710-210.0 8.904-003.0 Old No Gas Burner Rings Only 8.710-203.0 347502 347504 347506 347508 347510 Model No. Z-21 X-11 X-44 X-66 X-88 Jets Req’d 1000 BTUH 20 32 44 66 88 100-200 160-320 220-440 330-660 440-880 Electronic Ignition Part No 9.803-613.0 Gas Jets Part No 8.710-216.0 8.710-217.0 8.717-377.0 8.710-218.0 8.710-219.0 9.802-684.0 8.710-214.0 Old No Gas Jets for Burner Rings* (above) 8.710-215.0 347552 347554 347562 347565 347566 347549 Drill Size #52 #54 #62 #63 #65 #66 #69 Orifice Size (.0635) (.055) (.038) (.037) (.035) (.033) (.029) Blank (Must Be Drilled) *Due to freight damage on assembled rings/jets, separately order correct number and size of jets for each burner ring. Page 148 Use NG NG LP LP LP LP LP 9.803-610.0 9.803-562.0 8.905-681.0 8.930-332.0 Old No 7-701510 7-702371 6-01352 6-01353 Natural Gas/LP – Large Electronic Ignition Valve Old No 7-70003 Part No 8.718-050.0 8.718-048.0 9.803-612.0 7-700022 2-990581 See Electronic Ignition Parts below. Description Natural Gas Electronic Ignition Valve, 24V, 1" NPT (no LP conversion kit) LP Gas Electronic Ignition Valve, 24V, 1" NPT (no NG conversion kit) Solenoid Pilot Natural Gas – Small Electronic Ignition Valve Old No Part No 9.803-616.0 9.803-618.0 8.718-112.0 7-700021 7-702320 7-70700 Description Natural Gas Electronic Ignition Valve, 24V, 3/4" NPT LP Conversion Kit (NG to LP) NG Conversion Kit (LP to NG) 9.803-616.0 7-7000CH1 7-7CH1 7-70360 7-70232 7-7078 Description Natural Gas Millivolt Valve, 3/4" NPT Pilot for Piezo Ignitor 47" Powerpile LP Conversion Kit (NG to LP) NG Conversion Kit (LP to NG) 9.803-615.0 8.718-048.0 9.803-612.0 9.803-613.0 9.803-610.0 Description Electronic Ignition Controller Black 90 sec TFI Pilot, Electronic Ignition 48" Ignition Cable 60" Ignition Cable 69" Ignition Cable

BURNERS Gas Regulators ! A.G.A. Design Certified Part No. Natural Gas 9.803-616.0 8.710-182.0 8.717-766.0 8.717-767.0 8.718-099.0 8.717-768.0 8.710-174.0 9.802-674.0 Org No. 7-700021 924895 924904 924908 921431 924870 860192 971495 LP Gas Regulator Conversion Kits 8.718-111.0 8.718-113.0 9.803-618.0 9.802-688.0 8.710-162.0 8.710-187.0 924897 924913 7-702320 924868 924900 860123 Size 3/4” 3/4” 3/4” 3/4” 3/4” 1” 1” 1” ! CGA Certified Voltage 24V 115V Millivolt 24V 24V 24V 24V 24V Model No. VR8304M4002B 36C03A41S1 VS820A-1005 V800A1328 SV9601M4167 700-44J 70-05J 7000 DERHC, 5N2501531 Fits White Rogers - 924895, 924896 Fits Honeywell - 924904, 924908 Fits Honeywell - 921431 Fits Honeywell - 971495 Fits Robert Shaw - 924870 Fits Robert Shaw - 860192 Brand Honeywell White Rodgers Honeywell Honeywell Honeywell Robert Shaw Robert Shaw w/ Pilot Robert Shaw Propane Gas Regulators Draft Diverters & Rain Caps ! High quality Fischer regulators ! High and low pressure Part No. 8.717-752.0 8.717-746.0 8.717-747.0 8.717-749.0 9.802-633.0 Old No 860283 7-1005 7-10050 7-10052 7-1010 Description LP, FPOL x 3/4” FIP High Pressure Low Pressure Regulator, Propane Gas, Fisher LP Assembly, includes High/ Low Pressure Assy Part No. 8.717-764.0 8.717-728.0* 9.801-040.0* 8.717-730.0* Rain Caps 8.717-731.0 8.717-732.0 Old No 924889 835526 835525 835531 7-10033 7-10034 *Available from Springdale and Camas Description 8” Oil Fired, Barometric Dampener 8”, Round Gas-Fired 10”, Round Gas-Fired 12”, Round Gas-Fired 10”, Exhaust Stack, Cap 12”, Exhaust Stack, Cap ! Prevents backdrafts, keeps cold air out ! Prevents water from running down vent pipes ! Fits on standard stove pipe ! Hot dipped galvanized Page 149

BURNERS Propane Gas Hose Part No. 8.711-853.0 8.711-856.0 8.711-854.0 8.711-864.0 Old No 867210 707127 707431 707432 Powered Damper Description LP 1/4” x 10’ POL x POL LP 1/2” x 48” 1/2 MNPT BE LP 1/4” x 18” MPOL BE LP 3/4” x 16” MNPT BE Propane Tanks Part No. 8.717-791.0 Old No 891113 Part No. Description Tank, 43# - without OPD valve NOTE: No Air Freight shipments on the above items 8.749-806.0 8.753-171.0 8.753-253.0 8.749-807.0 Description Powered Damper, 10" Powered Damper, 12" Powered Damper 8" Wiring Harness Gas Valves - 1" by Robert Shaw Universal type for new equipment or replacement. Gas Pilots ! Manual gas cock ! Auto-pilot safety valve !Wiring and hardware included ! Pilot gas filter ! 600,000 BTU LP gas 720,000 BTU -tural gas ! 1" inlet/outlet * Kit is for 8.710-174.0 and includes: gas valve, flame sensor, electrode pilot relight and harness Part No 8.710-178.0 8.710-179.0 8.710-174.0 8.710-181.0 8.710-163.0* 9.802-677.0 Old No 347406 347407 347403 347409 347379 LP Conversion Kit to right Description 240V AC/NG, Standing Pilot 24V AC/NG, Standing Pilot 24V AC/NG, Electronic Ignition 700 MV, Natural Gas 24V Retrofit Kit (NG) 720,000 BTU Ignitor Part No. 8.718-100.0 8.718-101.0 8.718-011.0 9.802-685.0 9.803-610.0 Old No 829858 829977 914162 971496 7-702371 Description Pilot Gas LP Gas Orifice HS Pilot Gas - Natural Gas Orifice HS Pilot Burner & Ignition Pilot Gas - Natural Gas NEW Pilot - Natural Gas LP Conversion Kit for Robert Shaw Convert NG to LP Part No 8.710-187.0 8.710-164.0 Old No 347421 347380 Description 1" LP Conversion Kit LP Orifice Page 150

BURNERS Delavan Fuel Nozzles Select proper size for maximum burner efficiency. GPH 60° A Hollow 60° B Solid Part No Part No .50 .60 .65 .75 .85 .90 1.00 1.10 1.20 1.25 1.35 1.50 1.65 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 4.00 4.50 5.00 6.00 6.50 7.00 8.00 8.50 9.00 8.700-850.0 8.700-851.0 8.700-852.0 – 8.700-853.0 8.700-854.0 8.700-855.0 8.700-856.0 8.700-857.0 8.700-858.0 8.700-859.0 8.717-328.0 8.700-861.0 8.700-862.0 8.700-863.0 8.700-864.0 8.700-865.0 8.700-866.0 – 8.700-867.0 – – – – 8.700-999.0 – – – – – 8.700-868.0 – – 8.700-870.0 8.700-871.0 8.700-872.0 8.700-873.0 8.700-874.0 8.700-875.0 8.700-876.0 8.700-877.0 8.700-878.0 8.700-879.0 8.700-880.0 – 8.700-881.0 8.700-882.0 8.700-883.0 – – 8.700-884.0 – – – – – – – – – 70° A Hollow 70° B Solid Part No 8.700-887.0 – – – – – 8.717-276.0 - 8.700-890.0 – – 8.717-278.0 - 8.700-892.0 – – 8.700-893.0 – 8.700-894.0 8.700-895.0 – – – – – – – – – – Part No – – – 8.700-896.0 – – 8.700-897.0 – – 8.700-899.0 8.700-900.0 – – 8.700-903.0 8.700-904.0 8.700-905.0 – – – – – – – – – – – 8.700-910.0 – – 70° AR-D Part No Part No – – – – – – 8.756-261.0 – – 8.756-262.0 – 8.756-263.0 – 8.756-264.0 8.756-265.0 – – – – – – – – – – – – – – – 80° A Hollow Part No 8.700-911.0 8.700-912.0 8.700-913.0 8.700-914.0 8.700-915.0 8.717-333.0 8.700-916.0 8.700-917.0 8.700-918.0 8.700-919.0 9.802-584.0 9.700-921.0 8.700-922.0 8.717-329.0 8.700-924.0 8.700-925.0 8.700-926.0 8.700-927.0 8.700-928.0 – 8.700-929.0 8.700-930.0 – – – – – – – – 80° B Solid Part No – 8.700-932.0 8.700-933.0 8.700-934.0 8.700-935.0 8.700-936.0 8.700-937.0 8.700-938.0 8.700-939.0 8.717-350.0 8.717-358.0 8.717-351.0 8.700-943.0 8.717-352.0 8.717-353.0 8.700-946.0 8.700-947.0 8.717-330.0 8.717-354.0 8.700-950.0 8.700-951.0 8.700-952.0 8.717-367.0 8.717-357.0 8.700-956.0 8.700-953.0 – 8.700-957.0 8.700-958.0 8.700-959.0 “Snap” Fuel Nozzle Check Valve Spring-loaded “snap” check valve replaces filter element on fuel nozzle. Valve opens when fuel pump pressure reaches 130 PSI and “snaps” shut when fuel pressure drops below 130 PSI. Stops “smokey” burners at start-up and eliminates “shutdown” after burn. ! Reduces nozzle fouling caused by residual fuel in orifice ! Easy field installation in standard fuel nozzles ! Reduces soot build-up in coil Part No 8.900-083.0 8.900-084.0 8.700-845.0 8.700-844.0 Old No 079210 079211 079215 079214 Description Snap Fuel Valve Snap Fuel Valve Snap Check Valve, (5/pk) Snap Check Valve, (5/pk) PSI 100 130 130 100 Page 151

BURNERS Delavan Fuel Nozzles - continued Select proper size for maximum burner efficiency. GPH .50 .60 .65 .75 .85 .90 1.00 1.10 1.20 1.25 1.35 1.50 1.65 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 4.00 4.50 5.00 6.00 6.50 7.00 8.00 8.50 9.00 90° A Hollow 90° B Solid Part No – Part No 8.700-960.0 8.700-961.0 8.700-962.0 – 8.700-963.0 9.802-583.0 8.717-332.0 – 8.700-966.0 8.700-967.0 9.802-585.0 8.700-969.0 8.700-892.0 8.700-970.0 8.700-971.0 8.700-972.0 8.700-973.0 8.700-974.0 8.700-975.0 8.717-336.0 8.700-977.0 8.700-978.0 – 8.700-979.0 – – – – – 8.700-981.0 – – 8.700-982.0 8.700-983.0 - 8.700-984.0 8.700-985.0 – 8.700-986.0 8.700-987.0 8.700-988.0 8.700-989.0 9.802-575.0 9.802-576.0 9.802-577.0 9.802-586.0 8.700-994.0 8.700-995.0 8.700-996.0 8.700-997.0 8.700-998.0 – – 8.701-000.0 – – – – – Part No 8.701-018.0 8.701-021.0 8.701-020.0 8.701-023.0 8.717-342.0 8.701-025.0 8.701-026.0 8.701-027.0 8.701-028.0 8.701-029.0 8.701-031.0 8.701-039.0 8.701-032.0 8.723-697.0 8.723-698.0 8.701-006.0 8.723-699.0 8.723-700.0 8.740-139.0 8.701-027.0 8.701-007.0 8.723-701.0 8.701-037.0 8.701-015.0 8.701-038.0 8.701-016.0 8.701-017.0 8.701-013.0 8.701-019.0 8.701-034.0 8.701-026.0 8.701-028.0 8.701-035.0 8.701-030.0 8.701-036.0 Old No 079477 079480 079479 079481 079482 079483 079484 079486 079487 079490 079505 079492 GPH 2.00 x 60°W 1.50 x 80°W 1.65 x 80°W 1.75 x 80°W 2.00 x 80°W 2.25 x 80°W 2.50 x 80°W 1.25 x 80°W 2.75 x 80°W 3.00 x 80°W 4.00 x 80°W 1.65 x 90°W 2.00 x 90°W 0.85 x 80°W 0.90 x 80°W 1.00 x 90°W 1.10 x 80°W 1.20 x 80°W 1.25 x 60°W 1.25 x 80°W 1.35 x 60°W 1.35 x 80°W 1.35 x 90°W 1.50 x 60°W 1.50 x 90°W 1.65 x 60°W 1.75 x 60°W 2.25 x 45°W 2.25 x 60°W 2.25 x 90°W 2.50 x 80°W 2.75 x 80°W 2.75 x 90°W 3.25 x 80°W 5.50 x 80°W NOTE: The above “W” nozzles are stocked — all sizes are available. Page 152

BURNERS Gas Valves – LP or Natural Universal-type for building new systems or field replacement. 750 MV, 24V or 120V controls by White-Rodgers. ! 335,000 BTU max ! 3/4" inlet/outlet ! All adjustments and wiring connections on top of valve ! Automatic outlet pressure regulator ! A.G.A.-design certified, C.G.A.-certified 8.710-190.0 Gas Valve Accessory Components Use with both 3/4" and 1" models on this page. Part No 8.710-172.0 8.710-182.0 8.710-183.0 8.750-110.0 8.750-109.0 Old No 347400 347410 347412 Description Gas Valve 24V (1) Gas Valve 120V (2) Gas Valve 750 MV (1) 3/4" NG to LP Conversion Kit 3/4" LP to NG Conversion Kit (1) Includes two 3/4" x 1/2" all-thread plated bushings and valve instructions. (2) Includes L.P. Kit, two 3/4" x 1/2" and one 1/2" x 3/8" all-thread plated bushings and all instructions. White-Rodgers Repair Parts Part No 8.710-184.0 8.710-197.0 8.710-198.0 Old No 347416 347440 347446 Part No 8.710-190.0 8.710-191.0 8.718-092.0 8.710-196.0 9.802-686.0 Old No 347430 347431 347436 347438 Description 750 MV Generator P110T Pilot Burner (-tural gas) Thermo Couple (w/ 24") Cap Tube Thermo Couple (w/ 36") Cap Tube Thermopile, VNG, 44 Description 24V Cycle Pilot Control (347425) 120V Cycle Pilot Control Gas Ignition Electrode (24" Lead) Insulation and Rigid Disc/Donuts Refractory-grade ceramic kaowool formed; retains heat inside coil for better fuel efficiency and paint protection. Part No Old No “Rigid Formed” Donut and Discs 8.704-807.0 8.704-810.0 8.717-474.0 8.704-808.0 8.704-809.0 8.717-475.0 Insulation Blanket 8.901-288.0 8.901-289.0 8.704-800.0 8.704-802.0 8.704-805.0 122253 122258 122254 122257 Description Donut Donut Donut Disc Disc Disc 122204 122205 122206 122222 122225 Coil Wrap Coil Wrap Coil Wrap Full Roll Full Roll Thickness Width .88" .88" 1/2" 1/2" 18" 6"/4.4" 16" 6"/4.4" 24" 18" 16" 24" 1" 1" 1" 1/2" 1" 24" 4' 24" 5' 24" 6' 24" 37.5' 24" 25' Length Page 153

ELECTRICAL COMPONENTS Legacy Flow Switch ! Horizontal or vertical mount ! 5000 PSI ! 10 GPM max flow, 1.8 GPM min flow ! 180°F ! 12-250V, 3 amps ! 3/8" FPT inlet/outlet ! 2 wire reed ! 62" cord length Flow Switch ! 12 GPM ! 5000 PSI ! Micro switch ! 176°F ! 3/8" inlet / outlet ports ST-7 Part No Description 8.755-296.0 Part No 8.933-006.0 8.712-244.0 9.803-266.0 9.803-266.0 Old No Description MV60, Vertical or Horizontal Mount AP 500, Vertical Mount Only 109672 Replacement Reed Switch (AP & MV) Reed Switch (AP) (2 wire) Phoenix Flow Switch w/ Pilot Flow Switch ! Brass body ! 8 GPM ! 3600 PSI ! 3 Amp reed switch ! 180°F ! 3/8" inlet / outlet ports ST-5 Part No 8.712-252.0 8.712-253.0 Old No 410320 410322 Description Switch with Pilot Reed Switch ! 75-16.0 GPM ! 4000 PSI ! 165°F ! 3 Amp, 250V ! 96" reed cord ! Includes 8mm pilot ! 3/8" F inlet/outlet ! 2.5 lbs ! Mounting hole ST-7 Horiz. or Vert. Mnt (47" wire length) ST-6 General Pump TMT Flow Switch Part No 8.712-243.0 8.712-245.0 8.704-122.0 8.704-121.0 Old No 410305 410306 109675 109673 Description ST-5 Vert. Mnt Only (47" wire length) ST-6 Horiz. or Vert. Mnt (47" wire length)ST-5 Reed Switch ST-6 Reed Switch Legacy Flow Switch Spring return float allows full mounting versatility ! 4050 PSI ! 3500 rated pressure ! Horizontal or vertical mount ! Forged brass body ! 3/8" MPT inlet/outlet ! 8 GPM ! 190o F ! One Amp switch ! Solenoid control Part No 8.712-246.0 Old No 410307P Flow Switch Description ! 1.5 GPM @ 50 PSI ! 5000 PSI ! Minimal pressure drop up to 12 GPM flow ! 40-180°F ! 5 Amp, 250V ! 48" electrical lead length ! 3/8" F inlet/outlet ! 1.0 lbs ! Can be mounted in any position ! Activates with 1.5 GPM flow ! Micro-switch technology eliminates reed switch Part No 8.712-258.0 Old No 100934 Description Inline Flow Switch Page 154

ELECTRICAL COMPONENTS Flow Switch - 7300 PSI Stainless-Steel ! 7300 PSI ! Stainless-steel ! 176°F ! 3/8" inlet/outlet ! 47" wire length ! 1-8 GPM Compact Pressure Switch 3-Amp rating provides the switching power to control fuel solenoids just like the large switches. Body measures 1" x 1-1/4" x 2" (not including wire or connector). Part No 8.723-665.0 Old No 87236650 Description ST-505 Flow Switch ! 3600 PSI max rating ! 580 PSI switch pressure ! 200°F ! 1/4" brass MPT connect stainless-steel plunger Vac Switch – Burner Control Normally open (NO) switch closes when pump vacuum begins drawing water and opens when vacuum is broken due to pump shutdown or empty water tank. ! 1/4" FPT connect ! Heavy-duty 16 Amp contacts ! 140°F max water temperature ! 3 Amp switch rating – 250V Old No 411050 Part No 8.712-260.0 8.712-270.0 ! 48" – 3-wire cable for use in either NC or NO application: Blue = Common Brown = NO Red = NC Description Compact Pressure Switch Pressure Switch AL 3/8" Stainless 435 PSI Black Pressure Switch Part No 8.712-391.0 8.712-392.0 8.712-393.0 Old No 413031 413032 413034 Description 1.5" (HG) Vac Switch 2.5" (HG) Vac Switch 4.5" (HG) Vac Switch ! Brass stem and stainless-steel nipple ! 3600 PSI ! 580 PSI switching pressure ! 45" wire length ! 195°F ! 1/4" male inlet ! 15 Amp !Weight: 8 oz ! 250V Part No 9.802-458.0 Pressure Switch Operation without opening switch case: Blue=Common CONNECT: Red/Blue=N/C, Blue/Brown=N/O ! 200°F ! Stainless-steel plunger ! 360 PSI ! 1/4" and 3/8" MPT nipple ! 15 Amp — 115 or 230V AC ! 3-wire — internally wired for either N/O or N/C ! 42" wire length Red Pressure Switch ! All stainless-steel construction ! 5800 PSI ! 640 PSI switching pressure ! 44" wire length ! 195°F ! 3/8" male inlet ! 15 Amp !Weight: 10 oz ! 250V Part No 8.712-261.0 8.712-262.0 8.751-272.0 8.701-311.0 Old No 411060 411060-40 082023 Description Pressure Switch (Switches@360 PSI) P. Switch 1/4" MPT (Switches@580 PSI) Pressure Switch 3/8" Micro Switch (15 Amp 115/230V AC) NOTE: 10 AMP 28V DC Micro Switch available. Excellent for use on 12V DC Hot Pressure Washers. Part No 8.712-267.0 8.704-572.0 Old No 411065 111459 Description Red Pressure Switch Heavy-duty Micro Switch Old No 6-021720 Description Black Pressure Switch Page 155

ELECTRICAL COMPONENTS Toggle / Push Button Switch ! 7/16" mounting bushing ! 1/2" diameter mounting hole required ! Mounting hardware included High-Limit Switch 8.712-306.0 ! Operates as safety device to shut off burner to prevent machine (water) overheating flashing to steam ! Does not turn back on until water has cooled 50°-70°F ! Normally used with other adjustable or fixed range thermostat which regulates water temperature Part No 8.712-319.0* 8.712-320.0 8.709-705.0* 8.709-704.0* 8.709-054.0* 8.709-065.0* 8.716-078.0 8.709-706.0 8.716-081.0 Old No 411605 411607 337206 337205 285140 285189 337207 Push Button Switches 8.709-053.0 8.709-064.0 *Motor rated Toggle Switch - 30 AMP ! 30 Amp 600V – DPST !With or without box ! Rated for: 2 HP motor @ 115V 3 HP Motor @ 230V Description HP* SPST, 20A/110V 1.0 DPST, 20A/110V DPST, 20A/125V 1.5 DPST, 20A/250V 2.0 SPST, 20A/120V 3/4 DPST, 20A/120V 3/4 SPST, 20A/120V 1.5 Switch Guard Waterproof Switch Protector 285139 285187 SPST, 5A/120V Push on/ push off SPST, 15A/120V Push and hold on/ release off screw screw Connects m/spade m/spade screw screw m/spade screw ! 15 Amp @110V/10 Amp @ 220V ! Heavy-duty brass housing (7000 PSI collapse rating) ! UL/CSA-rated, bimetal switch components ! 1/4 male spade lug termi-ls ! 1/2" MPT external thread connects for attaching conduit or PVC wire connectors ! 4000 PSI Part No 8.712-301.0 8.712-206.0 8.753-450.0 8.712-304.0 8.712-306.0 8.712-311.0 8.712-179.0 8.712-308.0 8.712-298.0 8.712-316.0 8.705-351.0 Old No 411254 411262 411266 411276 411270 411332 141538 Probe MPT 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" Temperature 120°F 140°F 160°F 170°F 180°F 230°F 180°F 210°F 230°F 330°F PVC Coupler High-Limit Switch w/ Wire Lead Part No 8.709-696.0 8.903-802.0 8.709-708.0* Old No 337187 337188 337210 *Not Rain Tight (Baldor Replacement) ! Operates as safety device to shut off burner to prevent machine (water) overheating flashing to steam ! Does not turn back on until water has cooled 50°-70°F ! Normally used with other adjustable or fixed range thermostat which regulates water temperature ! 15 Amp @110V/10 Amp @ 220V ! Heavy-duty brass housing (7000 PSI collapse rating) ! UL/CSA-rated, bimetal switch components ! 1/4" male spade lug terminals ! 1/2" MPT external thread connects for attaching conduit or PVC wire connectors Part No 8.712-185.0 8.712-205.0 Page 156 Probe MPT 1/2" 1/2" Wire Lead 42" 42" Temperature 225°F 330°F Description Switch only Switch and Rain Tight Box Switch w/ NEMA 1 Box

ELECTRICAL COMPONENTS EATON Cutler-Hammer DP Contactors ! Cutler-Hammer quality ! Type C25 definite purpose contactors feature a compact, efficient design with low-VA coil ! Din rail mounting Part No 8.724-267.0 8.724-264.0 8.724-265.0 8.724-266.0 8.724-269.0 8.724-268.0 8.724-270.0 8.724-271.0 8.724-275.0 8.724-272.0 8.724-273.0 8.724-274.0 8.724-280.0 8.724-276.0 8.724-277.0 8.724-279.0 8.724-278.0 8.724-283.0 8.724-281.0 8.724-282.0 8.724-286.0 8.724-284.0 8.724-285.0 8.735-015.0 Coil Voltage 24V 115V 230V 460V 24V 115V 230V 460V 24V 115V 230V 380V 24V 115V 230V 380V 460V 24V 115V 230V 24V 115V 230V 115V FL Amps 15 15 15 15 25 25 25 25 30 30 30 30 40 40 40 40 40 50 50 50 60 60 60 65 Motor Hp @ 115V 1ph Motor Hp @ 230V 1ph Motor Hp @230V 3ph Motor Hp @460V 3ph Motor Hp @575V 3ph 2 .75 .75 .75 .75 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 5 5 5 5 2 2 2 3 3 3 3 5 5 5 5 7.5 7.5 7.5 7.5 7.5 10 10 10 10 10 10 15 3 3 3 3 7.5 7.5 7.5 7.5 10 10 10 10 10 10 10 10 10 15 15 15 20 20 20 25 5 5 5 5 10 10 10 10 15 15 15 15 20 20 20 20 20 30 30 30 40 40 40 50 5 5 5 5 10 10 10 10 15 15 15 15 20 20 20 20 20 30 30 30 40 40 40 60 XT Overloads for DP Contactors ! Cutler-Hammer quality ! Direct heated bimetal elements ! Adjustable trip current ! Manual/automatic reset Part No 8.724-297.0 8.724-298.0 8.724-299.0 8.724-300.0 8.724-301.0 8.724-302.0 8.724-303.0 8.724-312.0 8.724-304.0 8.724-305.0 8.724-306.0 8.724-307.0 Amp Range 0.4 - 0.6 0.6 - 1.0 1.0 - 1.6 1.6 - 2.4 2.4 - 4.0 4.0 - 6.0 6.0 - 10.0 10.0 - 16.0 16.0 - 24.0 24.0 - 32.0 24.0 - 40.0 40.0 - 57.0 9.803-974.0 Part No 9.803-666.0 9.802-534.0 9.802-535.0 9.803-974.0 9.803-973.0 8.716-718.0 9.803-973.0 Old No 6-2004 6-2000 6-2001 6-2021 6-2022 6-2023 Model No. 8.716-718.0 Description CH C320KGS3 Contact Block, N/O, N/C CH E22B1 CH E22B2 CH E22PB3 Contact Block, N/C Contact Block, N/O Switch, Green Push Button CH E22EB2 CH E22VB51 Switch, Red Push Button Switch, 2-position Lever 9.802-534.0 Push Button and Contact Blocks ! Heavy-duty ! Cutler-Hammer quality !Water tight / oil tight Page 157

ELECTRICAL COMPONENTS Magnetic Motor Starters For pressure washer and carwash ap pli ca tions. ! 24VAC Control ! 1Ø - 240V, 3Ø - 240V or 480V Contactor ! Componentized for flexibility ! Thermal overloads adjustable within range shown ! Electrical life: 1,000,000+ cycles ! Mechanical life: 20,000,000+ cycles ! Contacts: 90% silver, 10% cad-oxide Type 24V Coil Part No. Old No Contactors UL Rating A B C D E F Part No. Coils Only 8.708-764.0 8.708-762.0 8.708-763.0 8.708-765.0 8.708-766.0 8.708-767.0 Part No. Thermal Overloads 8.708-749.0 8.708-758.0 8.708-760.0 8.708-742.0 8.708-744.0 8.708-746.0 8.708-802.0 8.708-803.0 8.708-804.0 8.708-750.0 8.708-759.0 8.708-761.0 8.708-743.0 8.708-745.0 8.708-747.0 8.708-753.0 8.708-754.0 8.902-523.0 8.902-524.0 8.902-526.0 8.708-790.0 Old No 260274 260272 260273 260275 260277 260278 Old No 260253 260270 260271 260247 260248 260249 260433AUTO 260437AUTO 260440AUTO 260253AUTO 260270AUTO 260271AUTO 260247AUTO 260248AUTO 260249AUTO 260265 260266 260267 260268 260269 260351 Voltage 24V 120V 220V 480V 120V 220V Type Man Man Man Man Man Man Auto Auto Auto Auto Auto Auto Auto Auto Auto ! Used to mount Overload to Motor Starter Contactors Part No. Old No Thermal Overload Connector Kits 8.708-768.0 8.708-770.0 8.708-789.0 260281 260284 260349 Description A,B,C,D E F Contactor Overload 120V Coil Part No. 8.902-527.0 8.902-528.0 8.902-529.0 8.902-530.0 8.902-531.0 8.708-791.0 Fits Contactor A,B,C,D A,B,C,D A,B,C,D A,B,C,D E E Amp Range Fits Contactor 9.0-15 14-23 17-26 20-33 28-42 35-50 2.0-3.3 4.5-7.5 6.0-10 9.0-15 14-23 17-26 20-33 28-42 35-50 A,B,C,D A,B,C,D A,B,C,D C,D C,D E,F A,B,C,D A,B,C,D A,B,C,D A,B,C,D A,B,C,D A,B,C,D C,D C,D E,F Old No 260290 260291 260292 260293 260294 260352 220V Coil Part No. 8.902-532.0 8.902-533.0 8.902-534.0 8.902-535.0 8.902-536.0 8.708-792.0 Old No 260295 260296 260297 260298 260299 260353 FL Amp 22 24 32 40 52 90 Coil 220V 1Ø HP 220V 3Ø HP 440V 3Ø HP 2 2 3 5 7.5 10 3 5 5 7.5 10 15 5 7.5 10 15 20 30 Relay Switch Part No. 8.716-087.0 Old No 875826 Description DPST NO 24VAC Omron 2000 Series ON / OFF Rotary Switch ! Single or three phase ! 2 position or 3 position ! Heavy-duty 9.802-449.0 Part No. 9.802-450.0 9.802-449.0 8.716-027.0 8.716-030.0 Old No 876028 876058 6-020203 950552 Description 2-position 115V/600V 3-position 115V/230V 1PH 20 Amp 3-position 230/460V, 3PH Rotary Switch Molded Power Cord Part No. !Water tight 8.752-150.0 Old. No. 826024 ! Factory finished look Description 3’ 14/3 w/ Plug Page 158

ELECTRICAL COMPONENTS Relays Junction Boxes 9.802-468.0 8.716-230.0 9.802-467.0 9.802-474.0 8.716-269.0 8.716-271.0 9.802-470.0 8.716-264.0 Part No 9.802-468.0 8.716-209.0 9.802-467.0 8.716-230.0 8.716-264.0 8.716-257.0 9.802-470.0 9.802-471.0 Old No 6-03621 6-03521 6-03541 6-0367 6-0381 6-0374 6-03671 6-036711 Description 120V, RH2B-Ul-AC120 for Pressure Washers 240V, RH2B-UI-AC240 Base, SH2B-05 for IDEC 24V, IDEC CLP Power Deltrol, 120V for SJ-5 Relay, Power Omron G4B112T1FDCUSRPAC120 for Delta/Alpha P&B/VF4-41F11, 12V DC, 40 Amp for 12V DC Units 13 HP and Below Relay, P&B, 24V/40 A for 12V DC Units over 13 HP 8.716-280.0, 8.716281.0, 8.716-272.0 8.716-320.0 8.716-321.0 9.802-475.0 9.802-476.0 9.802-477.0 Step-Down Transformers ! Industrial duty ! High-quality Cutler-Hammer ! Drops primary voltage to selected secondary voltage 8.716-322.0 Part No 8.716-899.0 Part No 8.716-593.0 8.716-899.0 9.802-553.0 8.716-904.0 8.716-883.0 9.804-556.0 8.716-882.0 9.803-971.0 8.716-875.0 9.802-550.0 9.802-552.0 9.802-551.0 9.803-668.0 9.802-553.0 Old No 6-05234 6-6031 6-60121 6-6035 6-60161 6-60141 6-60151 6-6025 6-60051 6-60021 6-60111 6-60101 6-60131 8.716-904.0 Primary V 600V 380/400/415 120/240V 120/240V 208/230/460V 208/277V 208/277V 380V 240/480V 240/480V 240/480V 240/480V Secondary V Size 120-240V 110/220V 24V 24V 24/115V 120V 120V 24V 120/240V 120/240V 120V 120V 550V/575/600V 115V 1.0KvA .750KvA .050KvA .100KvA .050KvA .050KvA .075KvA .050KvA .200KvA .500KvA .075KvA .050KvA .050KvA 9.802-474.0 8.716-269.0 8.716-271.0 8.716-272.0 9.802-475.0 9.802-476.0 9.802-477.0 9.802-478.0 8.716-280.0 8.716-281.0 8.716-320.0 8.716-321.0 8.716-322.0 8.716-323.0 8.716-324.0 8.716-326.0 8.716-327.0 8.716-329.0 9.802-483.0 9.802-484.0 8.716-339.0 Old No 6-0390 6-03901 6-03904 6-03906 6-03907 6-03909 6-03910 6-03911 6-03912 6-03913 6-0409 6-0410 6-04101 6-04102 6-04103 6-04104 6-041041 6-041043 6-0411 6-04110 6-041100 8.716-326.0 Description VNG Remote, Plastic 12" x 12" x 4", Metal VNG Remote Box Fiberglass, NEMA4 for PE Units 12" x 10" x 5.25" for Solid Sep 8" x 8" x 4", Plastic Alpha, for SEA 3-1100 10" x 8" x 6", Box, Plastic with Lid for SEA Box, Plastic without Lid E9801 Lid, Plastic for 9.802-477.0 18" x 16" x 9.25", Plastic for CLP, WB 14" x 16" x 6.75", Plastic for HBG, AMC Cover, Duplex Receptacle for Alpha 2" x 4", 3-hole, 1/2" WB, for CLP 2" x 4", Extension for 8.716-321.0, 8.716-323.0, 8.716-324.0 2" x 4", 5-hole, 1/2" for CLP 2" x 4", 4-hole, 1/2" for CLP 4" x 4", 3-hole, SK Series for Alpha/ PK 4" x 4", 5-hole, 1/2" for WB 4" x 4" SK, Cover Plate, for WB for 6-00041 2" x 4", Cover Plate, for 8.716-321.0 2" x 4", Junction 3-hole, 3/4" 2" x 4", 3-hole, 1" for ENG Page 159

ELECTRICAL COMPONENTS Enclosure Box Fuses for Magnetic Motor Starter Sets ! NEMA 65 non-metallic enclosure dimensions: 4-1/3" W, 4" D x 6" H ! 8 (1/2"-3/4") wiring knockouts on box ! Holes pre-drilled for mounting contactor and overloads with mounting screws included Part No Old No 8.902-525.0 260268X Description Box, Toggle and Hardware Manual Motor Starter w/ Sealed Box ! 25 Amp with adjustable overload ! Adjustment range 20-25 Amps ! Sealed box 3-1/4" W x 3-1/2" D x 6-1/2" H ! 110-500V IEC-rated ! Two-cord grips fit 1/2" threaded knockouts Part No 8.709-709.0 Old No 337212 ! Protective cover over buttons ! Single and 3-phase wiring instructions Description Motor Starter ! Full range of fuses Part No 9.802-463.0 9.802-464.0 8.716-173.0 9.803-977.0 8.716-187.0 9.803-664.0 8.716-194.0 9.802-460.0 8.716-165.0 8.716-191.0 8.716-192.0 9.802-465.0 8.716-169.0 9.802-462.0 8.933-007.0 8.716-177.0 9.803-663.0 8.716-179.0 8.716-180.0 9.804-050.0 8.716-183.0 RainTite Switch Box ! UL 728A ! 2-3/4" x 5-1/2" x 2" box ! Three 1/2" tapped holes ! Box includes two plugs, ground screw and mounting lugs ! Cover includes gasket Part No 8.709-702.0 8.709-703.0 Old No 337203 337204 Description RainTite Switch Box Switch Box Cover Machine Control Cam Switches – 3-Position Timer ! Preset and adjustable available ! Heavy-duty ! Heavy-duty rotary cam switches ! Legend plate reads off/pump/burner ! Quick make/break action reduces arcing !Wiring boot included (except 410242-3) ! Legend plate 2-1/2" square ! 4-screw mounting Part No Part No 9.802-472.0 Old No 6-036880 Description Solid State, 120V, 5-60 Min for Auto Start Circuit Breakers ! Provides protection against excessive Amp draw Part No 9.802-485.0 Old No 6-041250 Description 25 Amp (All 12V Systems) Page 160 8.712-219.0* 8.712-224.0* 8.712-225.0* 8.712-227.0* 8.712-228.0* 8.712-229.0* 8.712-234.0 8.712-235.0 Old No 410210 410221 410223 410231 410232 410233 410242 410243 410208 075052 Model S220-1686 S220-1687 S220-1688 S225-1686 S225-1687 S225-1688 S432-4095 S432-1402 Single-Hole Mounting – requires 1 22mm (7/8" Dia) hole 8.712-218.0 220-1789 AMP Rating V 20 20 20 30 30 30 40 40 20 Replacement Knob 110V 220V 220V 110V 220V 220V 240V 480V 110V *Replacement Knob – fits those part numbers above marked with an asterisk (*) 8.700-258.0 Phase 1Ø 1Ø 3Ø 1Ø 1Ø 3Ø 1Ø 3Ø 1Ø 8.716-170.0 8.716-175.0 8.716-172.0 8.716-174.0 8.716-186.0 8.716-188.0 8.716-161.0 8.716-163.0 Old No 6-022970 6-0229810 6-0229710 6-02320 6-023080 6-023090 6-02321 6-022910 6-022920 6-02311 6-02312 6-02306 6-02296 6-02295 6-02294 6-022982 6-02299 6-022990 6-022992 6-02307 6-02304 6-02297 6-022981 6-022971 6-02298 6-02308 6-02309 6-02291 6-022911 Code ! Protect your equipment Max V FNM1/2 FNM8/10 FNM1 FNM2-1/2 FNM3 FNM5 FNM7 FNM8 FNM10 FNQ3/10 FNQ6/10 FNQ-R-3 KTK-R1/4 KTK-R1/2 KTK-R1 KTK-R1-1/2 KTK-R2 KTK-R2-1/2 KTK-R4 KTK-R5 KTK-R30 MDL1/2 MDL3/4 MDL1 MDL2-1/2 MDL3 MDL5 MDL7-1/2 MDL8 250V 250V 250V 250V 250V 250V 250V 250V 250V 500V 500V 600V 600V 480V 240V 600V 120V 600V 600V 600V 600V 120V 250V 250V 24V 250V 250V 250V 250V Amps 0.5 0.8 1.0 2.5 3.0 5.0 7.0 8.0 10.0 0.3 0.6 3.0 0.25 0.5 1.0 1.5 2.0 2.5 4.0 5.0 30.0 0.5 0.75 1.0 2.5 3.0 5.0 7.5 8.0

ELECTRICAL COMPONENTS Cam Switch and Box – 60 AMP On/Off Cam action fast “make-break” to reduce arcing. ! 60 Amp disconnect rating ! Four 1/2" knock-outs ! Versatile mounting ! Motor ratings: 7.5 HP @ 240vt 1Ø 5.0 HP @ 240vt 3Ø 30 HP @ 480vt 3Ø Part No 8.712-217.0 8.712-211.0 8.712-212.0 8.700-489.0 Old No 410206 410190 410192 076521 Description 63 Amp Switch w/ Large Box 4-1/2" w x 7" H x 3-3/4" D 60 Amp Switch only, No Knob Box only 3-7/8" x 4-7/8" x 2-3/4" for 410190 switch using 10 gage/smaller wire Knob NOTE: Switch does not have thermal overload protection. Cam Switch – “Big Boot” – 3-Position Large rectangular boot for easier wiring. ! Mounting configuration and electrical ratings same as “S” switches Part No 8.712-238.0 8.712-241.0 Old No 410260 410265 410219 Model T225-1686 T225-1688 220-1843 AMP Rating Voltage Phase 1Ø 30 30 Single-Hole Mounting – requires one 22mm (7/8" Dia) hole 8.712-223.0 20 110V 240V 220V 3Ø 1Ø Universal “Elektra” UL/CSA-rated machine control cam switches. ! Position – “off” –“pump burner” ! Quick make/break action — reduces arcing ! 2- or 4-screw mount (2-1/2" square legend plate) ! (Matches: Salzer/Kraus – -imer/ Bremas & Klockner – Moeller mounts) ! “Boot” has plenty of wiring room ! Screw-to-screw/terminal-to-terminal replacement for salzer “S” and “J” type switches above ! “Tite boot” excellent dust and moisture seal ! Contacts UL/CSA-rated: 25 Amp vs 20 Amp, 35 Amp vs 30 Amp, 50 Amp vs 40 Amp Part No 8.712-236.0 8.712-237.0 8.712-240.0 8.712-242.0 Old No 410251 410253 410263 410267 AMP Rating 25 25 35 50 Wiring Poles 1 2 2 2 Phase 1 1 1 1 8.712-236.0 8.712-237.0 8.712-240.0 Voltage 120 120/240 120/240 120/240 NOTE: None of the Elektra switches are for use on 3-phase motors without adding fuses or thermal overload. HP Rating 1.5 1.5/2.0 2/3 3/7.5 On/Off Switch with Box - “Elektra” UL/CSA-rated 25 and 35 Amp. Compact 3-1/4" square x 3-3/4" deep enclosure “versatile mount”. Part No 8.712-214.0 8.712-216.0 Old No 410203 410205 AMP Rating 25A 35 Wiring Poles 2 2 Phase 1 1 Voltage 120/240 120/240 NOTE: None of the Elektra switches are for use on 3-phase motors without adding fuses or thermal overload. HP Rating 1.5/2 2/3 Page 161

ELECTRICAL COMPONENTS Winco AC Generator 2400 Watt, 120 VT, 3600 RPM, 17 Amps. Digital Monitor Provides accurate testing and monitoring of electrical outlets and systems. ! Constantly monitors voltage and frequency indicated potential improper polarity and ground wiring ! 15" L x 6.5" W x 6.75" H ! 59 lbs weight ! Starts and runs 1/2 HP motor ! Industrial-duty – three carbon brushes ! The standard in the pressure washing industry: Winco 2FS2MP-1 ! 5/8" diameter shaft rotates either direction ! Extra slip ring for smoother power curve during motor starting ! Dual-sealed permanent bearings ! Conforms to UL1004-1, UL1004-4, and CSA 22.2 No. 100-04 Part No 8.716-610.0 Old No 337440 Description Winco AC Generator ! Genuine Winco parts ! Save downtime — we stock below items and more! Part No Winco Repair Parts 8.700-603.0 8.716-615.0 8.700-607.0 8.700-609.0 8.700-611.0 Old No 078451 078452 078455 078457 078459 Description Bearings Brushes Rectifier Receptacle Fan No. Req’d 2 3 1 2 1 ! Accurate testing and monitoring of all AC power sources ! RMS voltage and frequency meter ! Multi-tone fault alarm ! Hands-free auto reset ! Advanced microelectronics ! One-button operation Part No 8.749-947.0 Description Digital Monitor Adjustable Thermostat With panel-mount controls. ! 4000 PSI ! 302°F ! Accuracy ± 2.5% ! 16 Amp – 250V ! Large, easy-read dial ! Temperature change response within ± 6°F ! 3-1/2" immersion bulb w/ 60" capillary tube ! Seal, nut and 1/2" transition coupling included Part No Voltmaster Generator 2500 Watt/120V/21.6 Amp @ 3,600 RPM. 8.712-494.0 8.712-497.0 8.904-557.0 8.750-096.0 Old No 430050 430058 430060 Description 0-194°F Thermostat 0-248°F Thermostat 0-302°F Thermostat Knob 150°C/302°F Adjustable Flow-Thru Thermostat ! 36.5 lbs weight ! Brushless design ! Shaft rotates either direction ! Circuit breaker protection (standard) ! 7/8" shaft, two sealed (ball) bearings ! Industrial-type watertight enclosure (11-5/8" x 7-1/2" diameter) ! All copper windings — high-surge capacity Part No 8.709-810.0 Old No 337441 Description 2500 Watt Generator ! Stainless-steel case ! Silver contacts ! Ceramic insulation ! Stop collar ! Tension adjusting screw ! 3000 PSI Part No 8.904-555.0 8.700-501.0 Old No 430027 076731 Description Thermostat Switch Only ! 10 Amps – 110V ! 5 Amps – 220V ! Adjustable 85°-195° ! 1/2" inlet, 3/8" outlet ! Fenwall inside 8.914-555.0 8.700-501.0 Rocker Switches ! On/off switch Part No Old No 9.802-453.0 8.716-051.0 8.716-052.0 9.802-451.0 9.802-452.0 8.716-037.0 6-020251 6-020252 6-020253 6-020240 6-020241 ! Lighted available Description Curvette, V. Carling Curvette, 2-pos Curvette, 3-pos Carling, Green Lght, 2-pos Carling, Red Lght, 3-pos Rocker ! 125V/250V AMP 16/10 20/15 16/10 15/10 15/10 15/10 Voltage 125/250 125/250 125/250 125/250 125/250 125/250 Page 162 9.802-453.0 8.716-051.0 9.802-451.0 9.802-452.0

ELECTRICAL COMPONENTS On/Off Cam Switch ! Legend plate: on/off ! Tear-drop-shaped knob ! Face plate 2-1/2" square ! Motor ratings: 410202 – 1-1/2 HP/ 110V 410204 – 6 HP/ 240V Part No 8.712-213.0 8.712-215.0 Old No 410202 410204 Description 20 Amp/ 110V 28 Amp/ 240V Wire Loom – For Wiring Harnesses ! Protects wires from abrasion and crushing ! Controls bundles of wires and allows for multiple exits at wiring points ! “Factory-perfect” look for all machines Part No 8.709-679.0 8.709-680.0 8.709-681.0 8.709-682.0 Old No 337120 337121 337122 337123 Description 1/4" ID 100' Roll 3/8" ID 100' Roll 1/2" ID 100' Roll 5/8" ID 100' Roll Indicator Lights GFCI Module 20 Amp – 120V or 240V Not recommended for field service. ! Easily mounts to control panel ! Available in 12V, 24V, and 125V ! Great for remote applications 8.716-408.0 Part No 8.716-095.0 9.802-455.0 8.716-408.0 9.803-651.0 9.803-652.0 8.716-097.0 9.802-456.0 Old No 6-02053 6-020530 6-050413 6-0399 6-03990 6-02059 6-020590 Voltage 125V 125V 125V 24V 24V 12V 12V Color Red Green Amber Red Green Red Green Cord Caps/Plugs Breaker Switches 8.709-653.0 Part No. 8.716-067.0 8.716-068.0 8.716-069.0 8.716-073.0 8.716-074.0 8.716-075.0 8.716-076.0 8.716-070.0 8.716-077.0 8.716-066.0 8.716-071.0 Old. No. 875971 875972 875973 950198 950191 950208 950204 875618 950200 875953 875645 Description 7.5HP 230V 1PH 1400 7.5HP 230V 3PH 1400 7.5HP 460V 3 PH 1400 10A/460V 3PH 900 12A/480V 3PH 15A/18.8V 3PH 800 20A/277V 3PH 900 25A/250V 3 PH 2255 30A/277V 1PH 900 40A/230V 1PH 1070 DPST 20A/240V 1PH 1220 8.709-655.0 8.709-656.0 8.709-659.0 ! Industrial-quality ! Dead front cord caps — nylon body straight plugs and “auto-clamp” for cord ! 337013 angle plug has vinyl body and both 30A and 50A neutral leg Part No 8.709-653.0 8.709-655.0 8.709-656.0 8.709-659.0 Old No 337000 337004 337006 337013 Description 15A/120V, Black Nylon 20A/120V, Black Nylon 20A/250V, Black Nylon 30A-50A/250V, Black Vinyl 9.802-456.0 ! Using 120V or 240V shop attachable module; attach your power cord length as required ! Use with 16-12 gauge SJ, SJO or SJT 3-wire cords ! 20 Amp rating at 120V or 240V 60 Hz Part No 8.709-858.0 8.709-859.0 Old No 337642 337643 Description GFCI Module 1PH GFCI Module 3PH (not pictured) Romex Connectors (Metal) Vinyl Electrical Tape ! Premium grade – 7 mil ! UL-approved Part No Part No 8.704-706.0 Old No 118910 Description Roll 3/4" x 60' 8.709-663.0 8.709-664.0 8.709-660.0 8.709-661.0 Page 163 Old No 337020 337021 337017 337018 Description 1/2" Strt. Connector 3/4" Strt. Connector 1/2" Lock Nut Only 3/4" Lock Nut Only

ELECTRICAL COMPONENTS Liquid-Tight Strain Relief Connector for Cable, Wire and Tubing Keep water-tight NEMA-4 and 4x enclosures water-tight with these unique fittings. DOME NUT WITH INSIDE TAPER. As the dome nut is tight ened, the seal ring grips, holding the ca ble wire or tub ing pos i tive ly in place. LEAD-SCREW THREAD. The dome nut can be firmly tightened due to the high strength lead-screw thread. Part No 8.709-687.0 8.709-688.0 8.709-689.0 Type Dome Dome Dome PLASTIC JAM NUTS Part No 9.802-525.0 9.802-526.0 Thread 1/2" NPT 3/4" NPT 3/4" NPT Cord Size Cord OD 14/3-12/3 14/3-12/3 12/3-10/4 .230"-.470" .350"-.630" .510"-.710" Length 1.8" 2.0" 2.0" Thread 1/2" NPT 3/4" NPT CLAMPING SPLINES. Various sizes and odd-shaped ca bles, wires and tubing can be ac com mo dat ed due to over lap ping di ag onal ly split clamp ing splines. Part No 8.709-690.0 8.709-692.0 CONDUIT Part No 9.802-448.0 Type Flex Flex Thread 1/2" NPT 3/4" NPT Description Watertight Flex 1/2" x 100' Box Cord Size Cord OD 14/3-12/3 12/3-10/4 .230"-.470" .51"-.71" Length 4.3" 5.2" Ground Fault Circuit Interrupters (GFCI) GFCIs protect people and equipment by interrupting po ten tial ly lethal ground circuits exceeding 6mA. The dangers of electrical shocks have been long known — GFCIs are the only real way to be safe. Most city and county codes now require GFCI protection on power cleaning equipment. ! UL-listed ! Three wire circuits ! Transient voltage protection ! 4-6mA ground fault protection ! Grounded neutral protection Part No 8.709-850.0 9.802-432.0 8.709-842.0 8.903-807.0 8.709-843.0 9.802-431.0 9.802-433.0 9.802-434.0 8.709-860.0 8.709-853.0 8.709-861.0 8.709-854.0 8.709-862.0 8.709-855.0 9.802-430.0 Old No 337626 337607 337608 337609 6-010631 337645 337632 337647 337634 337649 337635 GFCI Plug without Cord 8.709-847.0 8.709-846.0 Volt 120V 120V 120V 120V 120V 120V 240V 240V 240V 240V 240V 240V 240V 240V 240V 337615 337614 120V 120V Amp 15A 15A 20A 20A 20A 20A 20A 40A 30A 30A 30A 30A 30A 30A 30A 15A 20A ! Mechanical trip indicator ! Compact size ! Rugged construction ! Radio frequency interference suppression Length 12' 36' 12' 12' 35' 36' 36' 36' 6' 6' 12' 12' 35' 35' 36' N/A N/A Plug Included Yes Yes No Yes Yes Yes Yes Yes No Yes No Yes No Yes Yes Yes Yes NOTE: User-attached plug also in cludes the sealant nec es sary to attach the power cord per UL specification. Page 164

CHASSIS COMPONENTS Molded Plastic Float Tanks ! Molded polypropylene ! 7-liter size: 13" x 5" x 6" ! 1-gallon size: 10" x 5" x 8" ! No holes for max flexibility ! 1-gallon tank has tight-fitting lid, included ! 7-liter tank lid is snap-on and sold separately Part No Part No 8.710-026.0 8.710-027.0 8.710-028.0 Old No 343002 343003 343004P Description 7-Liter Tank Only 7-Liter Tank Lid 1-Gallon Tank w/ Lid Fuel Tanks Stainless-Steel Float Tank ! Fully welded and water tight ! 2.8-gallon capacity ! 12" x 9" x 6" ! 16 gauge #303 stainless-steel ! 1/2" full coupling (stainless-steel) inlet/outlet ! Convenient mounting tabs Part No 8.710-029.0 8.710-034.0 Old No 343006 343016 Description Stainless-Steel Float Tank Stainless-Steel Lid Frames, Direct Drive & Belt Drive ! Heavy-duty aluminium that is more corrosion-resistant than steel ! 10" flat-free-tires for better reliability ! Integrated nozzle holders ! Available in both direct and belt-drive models 8.751-293.0 ! EPA/CARB-compliant ! Seamless one-piece construction of marine grade, UV-protected polyethylene ! Built-in reserve (when gauge reads “empty”, tilt to access additional fuel) Part No 8.751-294.0 8.751-296.0 8.751-293.0 Gallons 6 12 12 Rubber Parts Length 21.18" 20.375" 24.25" 8.751-294.0 ! Two-stage click when closed fuel cap ! 90° fuel withdrawal fitting ! Easy-to-read sight gauge ! Four shapes and capacities from which to choose Width 13.5" 13.75" 18" Height 10" 14.75" 11" 8.710-142.0 Old No 344735 NOTE: Includes fuel cap. Description 9-Gallon Fuel Tank – Plastic Fuel Tank - 9-Gallon Diesel ! Strap or bolt mount (4/5/16" inserts in bottom) ! Metal inset 3/8" inlet/return lines ! Black – crosslinked PE ! Vented fuel cap ! Filler neck doesn’t extend beyond tank wall ! Compact size: 19-3/4" L x 12" W x 10-1/2" H 9.802-064.0 Part No. Part No 8.924-399.0 8.924-400.0 8.924-402.0 8.924-401.0 Description Aluminium Frame, DD CW Aluminium Frame, 270 & 390 AL DD CW Aluminium Frame, BD CW Aluminium Frame, BD CW 200 Replacement Fuel Cap ! Fits 9-Gallon Diesel Fuel Tank (8.710-142.0) ! Fits Fuel Tanks (8.751-294.0, 8.751-296.0, 8.751-293.0) Part No 8.751-449.0 Description Replacement Fuel Cap for Fuel Tanks Page 165 9.802-064.0 8.706-557.0 9.802-067.0 9.802-069.0 8.706-745.0 9.803-046.0 8.706-525.0 8.706-553.0 8.706-524.0 8.706-556.0 9.802-066.0 9.802-066.0 Old No 859815 616018 830587 691877 829620 784446 891040 891041 891048 891051 8.706-557.0 Description Grommet, Nozzle Holder Bellows, Leg Boot Bumper Pad, Engine Handle Grip Plug, Hole Plastic Mount, Rubber Vibration Mount, Rubber Vibration 203/8-25 std Mount, Rubber Vibration 60 duro Mount, Rubber Vibration 1-3/8” dia x 3/4” Mount Vibration Pad, Soft Rubber 9.802-067.0 9.802-069.0

CHASSIS COMPONENTS Fuel Caps ! For gas or diesel fuel tanks ! Fits standard 2-1/4" fuel necks Part No 8.710-137.0 8.701-700.0 Old No 344725 091520 Description Fuel Cap Fuel Cap with Gauge 10" 8.711-901.0 Battery Boxes with Cover, Marine Style Protect batteries on pressure washers, boats or other industrial equipment. ! Attractive molded polypropylene ! Complete with hold-down cleats and strap for cover ! Small: 8-1/2" L x 6" W x 8-1/2" H ! Large: 11-1/4" L x 7-3/4" W x 10-3/4" H Part No 9.802-090.0 9.802-075.0 Old No 306625 306627 Description Small Box Large Box Part No 8.711-901.0 9.802-270.0 8.754-435.0 8.712-762.0 8.711-905.0 8.711-921.0 8.712-767.0 9.802-274.0 8.711-908.0 Flat-Free Tires Flat-Free Tires provide the bounce and load handling characteristics similar to an air filled tire - with the benefit of never going flat. Flat-Free tires are lightweight, non-marking, and come mounted on a heavy-duty steel rim with shielded ball bearings. Not for highway use. ! Heavy-duty Steel Rim ! Non-Marking ! 4" Steel Rim: Max load 300 lbs ! 12" Steel Rim: Max load 375 lbs Part No 8.711-898.0 8.754-435.0 Description Wheel & Tire Assembly, 4" Steel Rim Wheel & PU Tire Assembly, 12" Steel Rim Old No 4-0304 4-0303 4-0307 480115 4-03071 Description 10" Mag 10" Steel Rim w/ Tube 13" Steel Rim 10" White steel rim, 3/4" Hub Tubeless 6" Steel Rim Foam Filled 6" Tube Only 10" Tube Only 10" x 2-3/4" Hard Rubber Wheel 3" Gray Caster Wheel 9.802-270.0 9.802-271.0 Complete Wheels ! High-quality pneumatic, and semi pneumatic ! Fits 5/8" shaft 8.712-762.0 Interchangeable Bearings Old No 076504 076505 Part No 8.700-484.0 8.700-486.0 8.700-485.0 076504P Hub Caps and Collars Part No 8.700-183.0 8.700-184.0 9.802-782.0 Description 5/8" Bore Bearing 3/4" Bore Bearing 5/8" Nylon Bearing Old No 071625 071627 Description 3/4" Hub cap 5/8" Hub cap 5/8" Bore Shaft Collar Plastic Dip Tube Assembly Miscellaneous Parts Part No Description 8.719-064.0 9.802-066.0 8.932-992.0 ! New style plastic dip tubes ! Rubber bushing seal ordered separately Part No 8.706-494.0 8.706-495.0 8.706-496.0 9.802-053.0 Description Plastic Dip Tube Assemby, 7.5" Long Plastic Dip Tube Assemby, 12" Long Plastic Dip Tube Assemby, 17.75" Long Rubber Bushing, Fuel Line Page 166 Chassis Knob 5/16" Thread, Black Soft Rubber Foot Pad Vibration Isolator 3/8"

PRESSURE WASHER ACCESSORIES A+ Surface Cleaner Fast, even cleaning for large flat surfaces. Quickly cleans concrete & asphalt, and removes grime and deposits from tennis courts, ramps, and decks. Also great for factory floors, semi-trailer floors & drive-throughs. Cleans better and faster than spray wand alone, with no striping. Use with hot or cold water. Handles water up to 212° F to disinfect bathrooms and kitchens. Safety lock prevents accidental spraying. ! Two spinning nozzles 'floats' cleaner above the ground ! Circular design allows a zero wall clearance ! Stainless steel housing and handle ! Comfort Grip trigger handle ! 3/8" male quick connector plugs into your pressure washer's hose ! Reduces overspray on walls, landscaping, and operator ! Comes with two #2.0, 1/8" nozzles (for machines up to #4.0 nozzles), 25° nozzles rated up to 8 GPM & 4000 PSI ! Requires at least 3 GPM & 2000 PSI Part No 8.753-572.0 8.753-573.0 8.753-597.0 Description A+SC21 Rotary Surface Cleaner, 21" A+SC24 Rotary Surface Cleaner, 24" Swivel for 21" and 24" The “Big Guy” ! Powder-coated aluminum housing ! Oversized, self-lubricating twin thrust bearings ! Choice of two or four nozzles ! 10" pneumatic tires, 4" caster ! Crafted with durable stainless-steel and aircraft aluminum ! 212°F ! 4-10 GPM ! Dimensions: 28" x 44" x 12" !Weight: 48 lbs ! Uses 1/4" nozzle Whisper Wash Flat Surface Cleaners – continued Ground Force ! Flip and fold handle ! Choice of two or four nozzles ! Rebuildable swivel ! 212°F ! 4-10 GPM ! Dimensions: 24" x 60" x 9" !Weight: 29 lbs ! Uses 1/4" nozzle Part No 8.710-076.0 Old No. 343608 Description Ground Force Whisper Wash Flat Surface Cleaners ! Saves labor, fuel and water ! Balanced spray bar ! Eliminates overspray and zebra striping ! Quick connection Applications: ! Service stations ! Public facilities ! Driveways ! Pool and patio decks ! Restaurants ! Sidewalks !Warehouse floors The “Maxima 36” ! Portable breakaway handle ! 212°F ! 4-10 GPM ! 2500 RPM ! Dimensions: Cover: 36", Handle: 77" !Weight 37 lbs ! Uses 1/4" nozzle ! Use with conventional pressure washers ! 2,000-4,000 PSI ! Use with cold or hot wateR ! 2500 RPM ! Gondolas ! School yards ! Loading docks ! Stadiums ! And lots more!! ! Parking lots ! Marina docks Part No 8.710-074.0 8.710-075.0 8.750-604.0 8.701-879.0 8.701-874.0 8.701-876.0 Old No. 343606 343607 092110 092105 092101 092102 Description Whisper Wash Big Guy Two Nozzles Whisper Wash Big Guy Four Nozzles Swivel, Complete Big Guy and Classic Repair Kit, Seal, Big Guy and Classic Spraybar, 4 Nozzle, Big Guy Spraybar, 2 Nozzle, Big Guy The Classic ! Portable breakaway handle ! ABS Housing ! 2" nylon brush ! 212°F ! 4-10 GPM ! Dimensions: 19" x 77" x 12" !Weight: 28 lbs ! Uses 1/4" nozzle Part No Part No 8.710-089.0 Original No. 343636 Description Maxima 36 8.710-073.0 8.750-604.0 8.701-879.0 Original No. 343605 092110 092105 Description Whisper Wash Classic Swivel, Complete Big Guy and Classic Repair Kit, Seal, Big Guy and Classic Page 167

PRESSURE WASHER ACCESSORIES Whisper Wash Flat Surface Cleaners – continued The Ultra Clean WW ! ABS Housing ! Four 3" casters ! Powder-coated handle ! Dimensions: 19" x 43" x 9" ! 185°F Part No 8.710-072.0 Original No. 343604 The Ultra Clean HC ! ABS Housing ! 2" nylon brush ! Powder-coated handle ! Dimensions: 16" x 43" x 9" ! 185°F ! 3-6 GPM !Weight: 19 lbs ! Uses 1/4" nozzles ! 3-6 GPM ! 2500 RPM !Weight: 23 lbs ! Uses 1/4" nozzles Mosmatic Surface Cleaners and Duct Cleaner Turbo Surface Cleaner Delivers high-pressure performance with low Maintenance for any hot or cold pressure washer. Completely stainless-steel design makes this the toughest surface cleaner available in the pressurecleaning market. Description Whisper Wash Ultra Clean WW Swiss-engineered with high RPM swivel features reinforced self-lubricated stainless-steel ball bearings and dual spring-based carbide seal bushings for long-lasting operation under tough conditions. ! 4000 PSI ! 250°F ! 6.5 lbs Part No 8.710-071.0 Original No. 343603 Repair Kits Part No 8.701-879.0 8.701-882.0 8.701-883.0 8.750-604.0 8.707-653.0 Description Whisper Wash Ultra Clean HC Ideal for pressure washer contractor to clean walls, ceilings, public facilities, tile floors and other hardto-reach areas. Uses 1/8" meg 1503 nozzles. ! 4000 PSI ! 250°F ! 2 lbs ! Inlet Ports 3/8" NPTF Duct Cleaner Original No. 092105 092108 092109 092110 251119 Description Seal Kit; Classic, Big Guy and Ground Force Seal Kit; Ultra Clean Complete Swivel Kit; Ultra Clean Complete Swivel Kit; New Style Classic, Big Guy and Ground Force 2.5 x 25° 1/4" Nozzle Fits All Models Designed as an accessory for use with highpressure pumps or pressure washers. Cleans ducts, chutes, vents, restaurant exhausts,tanks, etc. ! 4000 PSI ! 250°F ! 9 lbs ! 12" stainless-steel Mosmatic Gun Swivel Mounts to your high-pressure gun or lance for an easy turning, low-maintenance gun swivel ! 4000 PSI ! 250°F ! 30 RPM Part No 8.712-467.0 8.712-466.0 Original No. 421057 421056 Description 1/4" MPT / 1/4" FPT Gun Swivel 3/8" MPT / 3/8" FPT Gun Swivel Part No 8.712-284.0 8.712-285.0 8.712-280.0 8.712-279.0 8.749-911.0 Original No. 411171A 411172 411156 411155 Description Turbo Cleaner – 8" Toggle Joint KGK Duct Cleaner TXR-2s, Adjustable Duct Cleaner TXR-2s, Fixed Surface Cleaner – 12" PSI 4000 4000 4000 4000 4000 Self-rotating and feeding stainless-steel triple bearing system for constant easy turning. Nozzle holders are 1/8" NPTF. Nozzles are sold separately. 12" Surface Cleaner Designed for effortless cleaning of small areas, including walls and angled surfaces. High RPM swivel with integrated toggle joint and adjustable tension system. Page 168

PRESSURE WASHER ACCESSORIES Surface Cleaner Nozzle Recommendation Determine the correct nozzle size for the pressure washer being used with the surface cleaner. Never use a smaller size nozzle as this will prematurely wear out the unloader valve on the pressure washer. The Legacy Undercarriage Cleaner and A+ Surface Cleaners come supplied with nozzles, for other surface cleaners, nozzles must be purchased separately. Threaded nozzles are listed on pages 80-81 of the catalog, to determine your pressure washer nozzle size refer to chart on page 78. Contact your RSM on other sizes or surface cleaner spray bars that use 4 nozzles or other sizes. Pressure Washer Nozzle Size # 3.5 and # 4.0 #4.5 and # 5.0 # 5.5 and # 6.0 # 6.5 and # 7.0 # 7.5 and # 8.0 15° x 1/4" MPT 2 each 2 each 2 each 2 each 2 each #2.0 #2.5 #3.0 #3.5 #4.0 25° x 1/4" MPT #2.0 #2.5 #3.0 #3.5 #4.0 Mosmatic Roof Cleaner "Cyclone" Rotary Flat Surface Cleaner Industrial-quality tool specially designed for efficient, high-pressure roof cleaning while keeping the operator in a safe area. ! 21" ! 4000 PSI ! 250 o F ! 31.9 lbs. ! Pressure gauge ! Ball valve ! Adjustable wheels (height and width) ! Safety eye connection for rope or cable ! Two 1/8" nozzles sold separately Part No 8.749-910.0 Description Mosmatic Roof Cleaner ! 4 - 6 GPM ! 2000 - 4000 PSI ! 200°F ! Polyethylene housing ! Collapsible handle ! Pneumatic tires ! 20” diameter surface cleaning ! Up to 5 gpm !Weight: 35 lbs Part No. 8.710-073.0 8.710-074.0 8.903-608.0 Original No. 630853 30-587 Description Classic Rotary Surface Cleaners (yellow) “Big Guy” Rotary Surface Cleaners “Cyclone” Surface Cleaners Undercarriage Cleaner ! No more crawling under a vehicle ! Simply connect to your hot or cold water pressure washer ! Easy to handle and maneuver ! Removes road grime, fuel and oil contaminants ! Removes snow sludge and ice ! Provides a clean, working environment for technicians ! Stainless-steel rotating assembly built to withstand pressures up to 4000 PSI and 250 o F ! 5.5" required clearance ! Four Nozzles: (2) 0° #2.0, (2) 25° #2.0 Part No 8.749-303.0 Description Undercarriage Cleaner Oil-Fired Hot Box Add hot water cleaning economically! Portable water heater add-on for existing cold water pressure washers. Quick Connect to cold water washer, supply fuel and power to Euro-Heat for hot water cleaning applications — USE ONLY WHEN NEEDED and keep the convenience of the portable cold water washer. ! 3000 PSI ! Quick hookup — 3/8" QC inlet / outlet ! Easy service access to burner parts ! Efficient vertical combustion configuration ! Diesel, kerosene, #1 heating oil ! 10" easy-roll tubed pneumatic wheels ! 5-gallon plastic fuel tank ! Compact size — 37" W x 27" L x 39" H ! 36' Ground Fault Interrupter plug ! Thermostat temperature control Part No 1.103-910.0 Page 169 Original No. HR-5030D Description 5 GPM / 3000 PSI – 120V

PRESSURE WASHER ACCESSORIES Goff’s Curtain Walls Build a Power Wash Cell to meet your needs. Goff’s Curtain Walls™ increase useable floor space while controlling overspray, contami-nts, climate, and noise levels. Curtain Walls™ glide easily on steel track and dual-wheeled rollerhooks. Made from a combination of 14-oz., heavy-duty, reinforced vinyl and double-polished 20-mil clear PVC material. Reinforced hems and chain-weighted lower hems add durability. Hook and loop fasteners on side hems attach to adjacent panels. Meet NFPA-701 requirements for flame retardancy. Curtains are also rot and mildew resistant. Standard model has a white vinyl top, clear PVC center, and blue vinyl bottom. balance 52" ! #2 Brass tooth grommets on 1' centers ! 14 oz. reinforced vinyl white top section ! All seams double-locked stitched ! Hook and Loop Fasteners allow adjacent panels to be easily attached to one another ! 20 mil. double-polished clear window ! All sections joined together using mildew/ rot resistant thread 27" ! 14 oz. reinforced colored vinyl section (your choice of over 12 different colors) ! Chain-weighted lower hem Part No 8.707-668.0 8.707-685.0 8.707-696.0 8.707-701.0 8.707-709.0 Part No Single 9.841-694.0 8.717-007.0 8.717-008.0 8.717-009.0 8.739-486.0 Station 9.841-695.0 Original No. 681133 681083 681084 681086 681087 681145 Description 6' width x 12' high 12' width x 8' high 12' width x 9' high 24' width x 10' high 24' width x 12' high 4-sided x 12' high Other sizes available — call for details Sandblast Kit – Carbide Nozzle Industrial Grade A Venturi orifice creates a uniform blast pattern, doubles sand velocity and produces up to 45% more work with 20% less sand. ! 5500 PSI max working pressure ! 10 GPM max flow ! 200°F ! 10 lbs. ! Nozzle tips sold separately Part No 8.701-485.0 Original No. 084079 Description Sand Blast Kit DWSDBTK Page 170 PSI Professional Sandblast Head 1500 1500 1500 1500 1500 1500 Includes hardware, track and rollers (white top, clear center and blue bottom panel) All 2-, 3- and 4-sided stations are 12' wide x 24' long (see diagram above). ! Long-wearing Carbide sand nozzle ! 1/4" FPT water inlet ! 200°F ! 10 GPM ! 3500 PSI ! Sand probe weight 6 oz, length 16" ! Head weight: 13 oz Nozzle Size 3.5 4.0 4.5 5.0 5.5 6.0 Part No 8.711-247.0 8.901-264.0 Part No 8.711-242.0 8.711-243.0 8.711-244.0 8.904-403.0 8.711-245.0 8.904-404.0 Original No. 391640 121041 Original No. 391631 391632 391633 391634 391635 391636 Description Sand Probe 1/2" ID Polybraid Tubing, 25' Original No. 251159 251198 251221 251237 251256 Description 4.0 x 5° Tip 5.0 x 5° Tip 5.5 x 5° Tip 6.0 x 5° Tip 6.5 x 5° Tip Self Serve Underbody Wand Assembly Ideal for rinsing the undercarriage of cars and trucks. Connect directly to a pressure washer gun or lance. Lightweight, the underbody wand assembly rolls easily giving the operator a long reach. ! Ergonomic lance to reduce bending ! Stainless Steel ! Uses 3 threaded MEG Nozzles ! 3000 PSI ! 300° F ! Inlet 1/4" ! Non-weeping Part No 8.755-257.0 Description Self Serve Underbody Wand Assembly Sandblast Nozzles Tips ! Replacement tips for Sandblaster Kit (part no. 8.701-485.0 – Original no. 084079) ! Use 1/4" meg 5° spray tip

PRESSURE WASHER ACCESSORIES Sewer/Tube Cleaning Nozzles The reverse jets on the fixed and rotary nozzles pull the hose through the tube or sewer line and blast debris from line or tube walls. ! 4200 PSI ! Physically small for cornering ability ! Corrosion-resistant stainless-steel construction ! Orifice size indicated on non-rotating styles ! Backward ports drive the nozzle forward and flush debris ! Forward ports blast into pipe and breaks up clogs and debris ! Rotating style adds extra agitation and surface cleaning Part No 8.710-874.0 8.710-878.0 8.710-876.0 8.710-877.0 8.710-880.0 8.710-879.0 8.710-881.0 8.710-885.0 8.710-884.0 8.710-886.0 8.710-883.0 8.710-882.0 Old No Non-Rotating Sewer Nozzles 8.710-875.0 373024 373023 373027 373025 373026 373029 373028 373032 373038 373037 373039 373036 373035 Nozzle 1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" Orifice Size O.D. 4.5 5.5 4.5 5.5 6.0 7.5 8.0 12 4.0 5.5 8.5 12 14 .580" .580" .730" .730" .730" .730" .730" .730" .920" .920" .920" .920" .920" Ports 0-forward, 3 back 1-forward, 3 back 1-forward, 3 back 1-forward, 3 back 1-forward, 4 back 1-forward, 4 back 1-forward, 3 back 1-forward, 3 back 1-forward, 3 back 1-forward, 3 back 1-forward, 4 back 1-forward, 4 back 1-forward, 4 back 0-forward, 3 back ports 1-forward, 4 back ports 1-forward, 3 back ports Part No 8.710-898.0 8.710-900.0 8.710-887.0 Old No Rotating Sewer Nozzles 8.710-899.0 373062 373061 373064 373040 Rotating Nozzle Size 1/8" 1/4" 1/4" *Duct Cleaner jet to sides instead of reverse 5.5 5.5 8.0 1/4" Duct Clnr* 5.5 Ports 0-forward, 3 back 0-forward, 3 back 0-forward, 3 back 0-forward, 2 side ! Rotating sewer nozzle ! Adds extra agitation ! 4000 PSI ! Back Jet Only 0-forward, 3 back ports 0-forward, 2 side ports Stainless-Steel Sewer Nozzles ! 4100 PSI ! Corrosion-resistant stainless-steel ! One forward orifice ! Three rear orifices Part No 8.710-905.0 8.710-906.0 8.710-907.0 8.710-908.0 8.710-909.0 8.710-910.0 Original No. 373075 373076 373077 373078 373079 373080 FPT 1/8" 1/8" 1/8" 1/4" 1/4" 1/4" Size 5.0 5.5 6.0 6.5 7.0 9.5 Water Broom 16" ! 4000 PSI ! Fits any 1/4" wand ! Requires (4) 1/4" nozzles and wand Part No 8.710-082.0 Original No. 343615 Mat Clamp Part No. 8.709-071.0 Page 171 Description Water Broom 16" ! Hang floor mats, scrubber pads, rugs, rags, coveralls, etc., for close-up pressure washing and drying Old No 823885 Description Aluminum Spring Action

PRESSURE WASHER ACCESSORIES Dual-Chemical Systems ! New deep-ribbed yellow casing, stays flexible even in cold temperature ! Hose assembly complete with gun and amphenol connectors pre-wired ! Fully-compatible with Power Blaster, Two-Step, Chemex and most other cold water dual-chemical systems Part No 8.709-045.0 Original No. Complete Hose Assembly 8.709-044.0 Lance Attachment Parts 8.709-049.0 8.709-050.0 8.709-051.0 285116 285120 285136 285137 285138 Complete Remote Gun Unit 8.709-046.0 285125 Remote Gun / Hose Parts 8.709-048.0 8.709-053.0 8.709-054.0 8.709-056.0 8.903-083.0 8.903-084.0 8.709-060.0 8.709-061.0 8.709-063.0 8.709-064.0 8.709-065.0 285135 285139 285140 285142 285144 285145 285175 285177 285181 285187 285189 Description 80' R2 Electric (5 wire) 100' R2 Electric (5 wire) Female Receiver Male Lance Swivel Retainer Nut Gun, Electric Gun Housing Switch P/B Switch, Chemical Switch Plate O-ring, Nipple (Two req’d) O-ring, Nipple (Bags of 50) Swivel Adapter Cord Grip Oetiker clamp Switch – Push Button Trigger Toggle, DPDT (Trig) On/Off/On Foot-Controlled Pressure Valve Operators of sewer and tube cleaning equipment need both hands free to feed or retract the hose in the sewer line. Foot-operated valve allows hands-free control. ! Inlet 3/8" – outlet 1/4" ! Brass body – stainless-steel valve ! Steel cover for safety ! Up to 12 GPM ! Up to 5000 PSI Part No 8.710-134.0 8.709-972.0 8.701-657.0 8.701-673.0 8.711-526.0 Original No. 344200 342024* 089006 089850 4-0193 Description PSI Sewer Cleaner Foot Valve Foot Valve w/ ST-2305 Repair Kit – Foot valve Repair Kit ST-2305 *Heavy gauge steel construction for durability and stability 3000 5000 Kit, 25' Hose, #4.5 Nozzle, Foot Valve ST-36 Pit Boss Sludge Sucker Sludge Sucker uses a high-pres sure water stream (1000-3000 PSI) to suck the sludge off the bottom of pits or tanks and eject it through a 1-1/2" (15' long) hose to a disposal tank. Sewer Hose SUPER FLEX I BLE SEWER LINE HOSE Hose and couplings have small outside diameter, allowing hose and nozzles to fit through sewer line. Sewer line has Super Tough poly-ether cover over ultra-flexible nylon tube. (1/8" sewer nozzle and hose will operate through many 1-1/2" lines.) ! 160°F (Nozzles not included.) Part No Original No. 150960 150963 150964 150968 150970 ! Nylon tube, poly-ether cover Description 1/8" hose – 4800 PSI, 1/4" inlet / 1/8" outlet 8.705-601.0 8.705-602.0 8.705-603.0 1/8" x 25' 1/8" x 50' 1/8" x 100' 1/4" Hose – 2600 PSI, 1/4" inlet / 1/4" outlet 8.705-607.0 8.705-608.0 1/4" Hose – 4400 PSI, 1/4" inlet / 1/4" outlet 8.705-610.0 8.705-611.0 8.705-613.0 150972 150973 150975 1/4" x 50' 1/4" x 100' 1/4" x 50' 1/4" x 100' 1/4" x 200' The base unit attaches to the end of a pressure washer lance with a quick coupler for ex ten sion to the bottom of the pit. Uses a 0° tip for suction / power ejection. ! Uses standard 1/4" MPT nozzle ! Easy to change for different plumbing system flows and pressures Part No 8.711-112.0 8.711-110.0 Original No. 376137 376126 Description ST-35 Pit Boss, 5.5 Nozzle / 15' Hose (Base unit only) *w/o hose, nozzle or quick coupler (3/8" inlet port) Drum Pumps Siphon liquids from higher to lower levels. Simply pump the bellows a few times to prime and start flow. Loosen air lock to stop. ! Drum pump fits 15-, 30- and 55-gallon drums ! Fit 2" bung opening ! Excellent for alkaline and acidic chemicals, diesel fuel, and oils ! Not for use with solvents! Part No 8.704-698.0 8.704-696.0 8.704-694.0 Original No. 118429 118423 118420 Description Red Hex Head (Heavy-duty) Red Head (Standard duty) Pail Pump (5 Gallon) Page 172

PRESSURE WASHER ACCESSORIES Fiberglass “Super Handles” ! Tough, durable, lightweight ! No cracking, splintering ! No kinks, dents ! Safer around electrical hazards ! Easy-twist cam lock extension Part No Super Handles 8.709-306.0 8.709-307.0 8.709-308.0 Original No. 306864 306865 306866 Super-Extension Handles 8.709-309.0 8.709-310.0 8.709-311.0 8.700-308.0 306868 306869 306870 075271 ! Super heavy-duty aluminum alloy threads ! Standard 3/4" Acme thread fits: brooms, brushes, utility tools ! Optional reduction adapter for 3/4" to Acme standard Description 48" Length (4 ft.) 60" Length (5 ft.) 72" Length (6 ft.) 4 ft. to 8 ft. Ext. 6 ft. to 12 ft. Ext. 8 ft. to 16 ft. Ext. Threaded Adapter Brushes Rotating Brush – Natural Bristle (soft) used for painted surfaces. Nylon Bristle (stiff) used for removing scum and grime on fiberglass boats, etc. ! Internal nozzle = size 20 ! 8 GPM Part No 8.709-314.0 Original No. Brush Unit Complete 8.709-312.0 306925 306935 Replacement Brushes 8.709-313.0 8.709-316.0 Truck Wash Brush ! Flag-tipped ! Soft bristle ! ACME thread for Super Handles, or broom handles Part No Drum / Tank Pump – Crank Type Chemical-resistant, lightweight pump, ideal for dis pens ing chemicals,pesticides and oils. Polypropylene for most alkalies, dilute acids, pesticides, and most oils and solvents. Ryton for extremely aggressive acids, aromatic and aliphatic hydrocarbons. ! 11 oz per revolution ! 6 GPM @ 70 RPM ! Viton seals ! Polypropylene gasket ! Outlet 3/4" barb two-piece ! 2" bung adapter ! 47" suction tube !Weight: 2.6 lbs Part No 8.704-700.0 8.704-701.0 8.700-526.0 Original No. 118435 118438 076975 Description Polypropylene Pump (Standard) Ryton Pump (Deluxe) Replacement Handles 8.709-298.0 8.709-303.0 8.709-304.0 8.709-305.0 Original No. 306800 306818 306824 306860 Description 2-1/2" Bristle w/ Bumper x 10" 2-1/2" Bristle x 18" 2-1/2” Bristle x 24" 60" Flow Thru Lance* *with Acme Thread and Garden Hose Attachment Deck Scrub Brush – Over / Under ! Not a Flow Thru ! Excellent chemical resistance ! Use with threaded handle ! Trimmed for cleaning hard-to-reach areas ! Stiff polypropylene bristle for aggressive cleaning ! Unique heavy-duty scrub brush with multi-level / angle. ! 10" molded polypropylene foam block does not warp or absorb water Part No 8.709-302.0 Original No. 306812 Description Deck Scrub Brush Tractor Brush – Soft for gentle cleaning of fine finishes. Part No 8.709-298.0 Original No. 306802 Description Flag Tip Window 10" 306927 306937 Description Natural Nylon Natural Nylon Drum Tool Accessories The indispensable tools. Orig. No. Part No 8.712-534.0 8.704-689.0 8.704-691.0 8.704-692.0 8.704-693.0 449339 118400 118404 118407 118408 Load Cincher Tie Downs 8.707-473.0 8.707-474.0 249938 249939 Description Drum Plug Wrench Lid-Off Funnel, 7" x 10" 3/4" Faucet 2" Faucet 7/8" x 5-1/2' (Non-Ratchet) “Quick Lock” 1" x 15' (Ratchet) “Tight Lock” 8.707-474.0 8.704-692.0 8.704-691.0 8.712-534.0 8.704-689.0 Page 173

PRESSURE WASHER ACCESSORIES Compact Foamer Generates a high-density clinging foam for extended dwell-time to increase chemical action. ! Stainless-steel, aluminum and brass ! 5" long, 1" diameter ! 4 and 6.5 nozzle included ! 1 to 5 GPM ! 195°F ! 2500 PSI Part No 8.903-998.0 8.903-999.0 Original No. 344022V 344023V Description 1/8" F Inlet 1/4" F Inlet NOTE: Most cleaning chemicals perform best when applied at 120°-150°F and can be applied as a foam by adding a foaming agent. See your chemical supplier to obtain the correct product. Foam Cannon The ideal Foam Generator Application Accessory meters the foaming chemical for customized foam type and applies the foam to match the application. ! Brass meter valve ! 3000 PSI max pressure ! High-impact, glass-filled body ! 4.8 GPM max flow ! Stainless-Steel Foam Turbulator ! 176°F max temperature ! 1/4" FPT lance connect ! Stainless-steel 1.5mm orifice (#5.5 nozzle equivalent) Part No 8.750-296.0* 8.750-429.0 8.750-430.0 Description Kit, Foam Jet, 5000 PSI, 5.6 GPM Kit, Repair, Foam Jet Orings / Stainless-Steel Filter Kit, Repair, Foam Jet, Hose / Valve / Filter * Includes tubing and fittings as shown Foam Jet Kit Long-distance foam applicator. Shoots OVER 20 FEET of dense foam. Suction at 30 feet of height. Varable spray pattern. ! 5000 PSI ! 5.6 GPM ! 14" inlet ! 140°F ! 33' Tube Lafferty Airless Foam Kit ! Machined stainless-steel construction ! Stainless-steel chemical check valve ! Stainless-steel quick disconnects ! 10' chemical tube with strainer ! Color-coded metering tips for up to 21 dilution ratios ! 0° nozzle for increased foam-throw distance Part No 8.749-908.0 (Model 10) 8.749-909.0 (Model 20) Part No 8.710-125.0 8.710-126.0 8.704-222.0 Original No. 344030 344032 113011 Description Foam Cannon / Injector Foam Cannon / Injector / Bottle Replacement Turbulator Screen Flow Rate@2000 PSI 4.0 GPM 6.0 GPM @ 137.9 bar 15.1 LPM 22.7 LPM Adjustable Foamer with Tank Control the foam spray angle with the variable fan nozzle. Air-Power Sprayers ! Pump-up style ! Heavy-duty plastic sprayers for chemical applications ! Both models have Adj. Nozzle — from mist to solid stream ! 2-gallon unit has 2' hose and hand trigger ! Excellent chemical resistance ! Locking hand pump handle serves as carrying handle Part No 8.704-703.0 8.704-702.0 Original No. 118842 118835 Description Thumb Button 3 Pint 2-Gallon Sprayer ! Big 1/2" x 520" roll ! Mil — spec #T27730 Part No 8.704-705.0 Page 174 Original No. 118905 Description Thread Sealing Tape ! PSI: 2600 ! GPM: 5.3 ! 140°F ! Horizontal variable fan nozzle ! Foam control adjustment knob Part No 8.710-124.0 Description Adjustable Foamer w/ Tank Teflon® Thread Sealing Tape

PRESSURE WASHER ACCESSORIES Thread Lock Products ! Direct replacement for LocTite® Part No 8.704-644.0 8.704-645.0 8.704-646.0 8.704-648.0 8.704-649.0 8.704-650.0 Nut Grade™ Old No 112350 112352 112354 112360 112362 112367 and Stud Grade™ and Fel-Pro™ products ! Excellent lubricant; prevents corrosion and fretting ! ND™ Description Nut Grade™ Nut Grade™ Nut Grade™ Stud Grade™ Stud Grade™ anaerobic adhesives are liquid materials that cure to a solid, chemical-resistant plastic state when air is not present LocTite® 242 242 242 271 271 Penetrating Adhesive (Sealant) 290 are trademarks of the Oakland Corp. LocTite® Equiv Bottle Size 10 ml 50 ml 250 ml 10 ml 50 ml 10 ml is a registered trademark of the LocTite Corp. Gloves – Industrial Duty Industrial-grade gloves for most industry-needs — chemical / heat / abrasion / laceration pro tec tion. 8.704-669.0 ! Black, 14" PVC glove lined with cot ton for the most de mand ing chemical han dling. Resists alkalines, acids — even works well as a sandblasting glove. ! Heavy-duty tape dispenser with serrated blade Part No 8.704-668.0 ! Gray – Split Cowhide work gloves, 2-1/2" gaunt let un lined — great general purpose work glove. Profit From Power Washing Part No 8.704-668.0 8.704-669.0 Original No. 116105 116114 Description Gray Roughout Black PVC Geared specifically to determining the profitability, feasibility, and marketability of owning a pressure washing business. It covers the methodology so crucial in both starting and operating a pressure washing service. Topics covered include: Rain Suit – 2-Piece ! Heavy-duty, 2-ply laminated vinyl (25 mil) ! Jacket and pants ! Bright safety yellow ! Vented for air flow Part No 8.704-666.0 8.704-667.0 Original No. 116100 116101 Description Large Extra Large ! Marketable services ! Equipment selection ! Equipment use ! Personal safety ! Target markets ! Customer relations ! Estimating ! Advertising ! Chemical selection and use ! Important legal issues ! Much more… Part No 8.750-507.0 Amazing Pocket Reference – Third Edition A ton of information in a 5 oz book! ! Air and gases, Chemistry, Math ! Plumbing and pipe, Electrical, Automotive ! Electrical, Automotive ! Physical constants ! 3350 conversion factors ! Over 20 other subject ar eas Part No 8.712-505.0 Original No. 449015 Description Pocket Reference Page 175 Description Profit From Power Washing 8.704-707.0 8.901-249.0 Original No. 118916 118918 Description Dis pens er Boxed 110 Yard Roll Shipping Tape and Dispenser Big 2" x 110 yard rolls of clear. Biaxially-oriented polypro pylene for secure packages.

PRESSURE WASHER ACCESSORIES Yamada Pumps Air-powered double diaphragm pump, “Reliable Performance Since 1905”. The answer to difficult product transfer problems. Air-drive allows freedom from electrical hazards or explosion-proof motor requirements. Choose from various wetted-parts materials to customize the pump to the chemical being pumped. Yamada’s smaller pumps are often used for pumping car wash chemical for ‘low-pressure’ functions. The 1/2" pump is also ideal for rapidly pumping oil, soap, etc., from 55 gallon barrels. Larger pumps are used for high-volume product transfer. Since all pumps are designed without rotating parts, they can also handle abrasive liquids such as ceramic slip, sand slurry, or enamel frit without damage. Have a unique challenge? Call us for help! ! 100 PSI / 180°F ! Environmentally-friendly non-lube air valve ! Automatic start/stop ! Non-stalling air valve — positive switching every stroke and won’t ice up ! Outside accessible air valve — easy inspection and maintenance ! Bolted flange connections — leak-free and easy maintenance ! Built-in abrasion and chemical-resistance ! Virgin diaphragm materials last twice as long as other pumps ! 1/4" model deliver 3.4 GPM with 20-100 PSI drive air ! 1/2" models deliver 15 GPM with 20-100 PSI drive air ! 3/4" models deliver 19.5 to 27.3 GPM with 20-100 PSI drive air ! 1" models deliver 35.7 to 48.3 GPM with 20-100 PSI drive air ! Infinitely variable flow control regulated by opening or closing discharge side valve and/or fluctuating air supply Part No 8.702-180.0 8.702-181.0 8.702-200.0 8.702-201.0 8.702-182.0 8.702-183.0 8.702-184.0 8.702-187.0 8.702-188.0 8.702-189.0 8.702-190.0 8.702-191.0 8.702-192.0 8.702-193.0 8.702-194.0 8.702-195.0 8.702-202.0 Old No 100381 100382 100410 100411 100383 100384 100385 100391 100392 100393 100394 100395 100396 100397 100398 100399 100415 *With air-cock instead of ball valve Intake and Discharge 1/4" FPT 1/4" FPT 3/8" FPT 3/8" FPT 1/2" FPT 1/2" FPT 1/2" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 1" FPT 1" FPT 1" FPT 1" FPT 1-1/2" FPT Air Inlet w/ball valve 1/4" FPT 1/4" FPT 1/4" FPT 1/4" FPT 1/4" FPT 1/4" FPT 1/4" FPT 1/4" FPT 1/4" FPT 1/4" FPT 1/4" FPT 1/4" FPT 3/8" FPT* 3/8" FPT* 3/8" FPT* 3/8" FPT* 1/2" FPT* Air Exhaust w/B-I muffled 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT Pump Body Poly Kyn Poly Poly Poly Poly Poly Poly Poly Poly Poly Alum Poly Poly Poly Alum Alum 8.702-180.0 8.702-183.0 Diaphragm Material Teflon Teflon Teflon ® ® ® Max Flow @ 100 PSI Santoprene Hytrel ® Santoprene Teflon ® Neoprene Buna-N Hytrel Teflon ® ® ® 3.4 GPM 3 GPM 6 GPM 6 GPM ® 15 GPM 15 GPM 15 GPM Buna-N Neoprene Hytrel ® Teflon Hytrel ® ® Buna-N 27.3 GPM 27.3 GPM 27.3 GPM 27.3 GPM 27.3 GPM 48.3 GPM 48.3 GPM 48.3 GPM 35.7 GPM 116 GPM Max Solid N/A N/A 1/32" 1/32" 1/32" 1/32" 1/32" 1/16" 1/16" 1/16" 1/16" 1/16" 3/16" 3/16" 3/16" 3/16" 9/32" Diaphragm Kits for Yamada Pumps To minimize downtime, Yamada pumps are designed for quick, trouble-free maintenance. Pump diaphragms, balls and seats can be replaced in 20 minutes or less and with little chance of leaks commonly associated with other diaphragm pumps. ! Kits include everything required for routine Maintenance Part No 8.703-277.0 8.703-278.0 8.703-279.0 8.703-281.0 8.703-282.0 8.703-283.0 Old No 105004 105006 105008 105010 105012 105014 Kit Teflon Hytrel ® ® Santoprene Teflon ® Neoprene Buna Pump Size Yamada Pump No. 1/4" 1/2" 1/2" 1/2" 3/4" 3/4" 100381 100383 100384 100385 100391 100392 NOTE: Individual components (O-rings or diaphragms only, for example) also available. Page 176 Part No 8.932-947.0 8.703-284.0 8.703-285.0 8.703-286.0 8.703-320.0 Old No 105018 105022 105024 105026 105150 Kit Teflon ® Neoprene Hytrel ® Teflon Buna ® Pump Size Yamada Pump No. 3/4" 1" 1" 1" 1-1/2" 100394 100396 100397 100398 100415

CAR WASH BAY ACCESSORIES Air-Operated Pump Twin diaphragm, self-priming, 7.0 GPM. ! Santoprene elastomers ! Dry air (or CO2) 20-120 PSI ! 7.0 GPM ! 120°F max liquid temperature ! Self-priming up to 15 feet ! Air (gas) in and out, 1/4" barb ! Choice of 3/8" or 1/2" barb fluid in/out ! Automatic, on-demand start and stop ! Flow control via air (gas) pressure ! Common uses: chemical transfer and dispensing parts, washers, and car wash systems Part No. 8.702-321.0 8.702-322.0 8.702-323.0 8.702-324.0 Original No. 100874 100874A 100875 100875A Description 3/8" Pump (Santoprene) 3/8" Pump (Viton) 1/2" Pump (Santoprene) 1/2" Pump (Viton) Part No Air-Driven Pump Twin diaphragm, self-priming, 1.9 GPM. ! Santoprene or Viton elastomers: Use Santoprene for soaps, use Viton for butyls ! Dry air (or CO2) 20-80 PSI ! 1.9 GPM ! Chemical in and out, 3/8" barb ! Air (gas) in and out, 1/4" barb ! Automatic, on-demand start and stop ! Control flow and pressure with air pressure Part No 8.702-320.0 8.702-319.0 8.700-387.0 8.700-388.0 8.700-418.0 8.700-419.0 Old No 100873 100872 075862 075863 075907 075908 Description Pump (Santoprene) Pump (Viton) Diaphragm Kit (Santoprene) Valve Kit (Santoprene) Diaphragm Kit (Viton) Valve Kit (Viton) ! 5'6" car wash model ! 8' truck wash model ! 3000 PSI ! Stainless-steel boom arm ! 3/8" FPT inlet/outlet hose included Part No Booms Air Filter / Regulators ! 1/4" ports ! 125 PSI ! Pressure-relieving ! Removes air line impurities to 5 microns ! Maintains and gauges pressure to, and therefore discharges pressure from, air-driven diaphragm pumps 8.712-586.0 Part No 8.712-585.0 8.712-586.0 8.712-587.0 Old No 462280 462285 462290 Description Regulator Only Filter/Regulator Gauge, 0-1 60, 1/8" 8.712-585.0 8.903-620.0 8.903-621.0 8.903-624.0 8.903-625.0 8.903-626.0 8.903-627.0 Parts / Accessories 8.903-622.0 8.903-623.0 8.903-628.0 8.903-630.0 8.903-632.0 8.700-265.0 8.905-605.0 8.905-604.0 8.712-450.0 8.700-263.0 8.700-287.0 Page 177 Old No 306660X 306662X 306665X 306666X 306667X 306668X 306663X 306664X 306669X 306670X 306672X 075064X 568612 568610 421020 075060 075130 Description 180° Wall Mount 5'6" Boom 360° Ceiling Mount 5'6" Boom 180° Wall Mount 10' Boom 360° Ceiling Mount 10' Boom 180° Wall Mount 8' Boom 360° Ceiling Mount 8' Boom 5.5' Rod/Hose, Assy Only 8' Rod/Hose, Assy Only 10' Rod/Hose, Assy Only Ceiling Mount, Base Only Wall Mount, Base Only Set Screw for Angle Block 90° End Coupler C/W Boom 8' Coupler Stainless-Steel C/W Boom Swivel – Brass 3/8" Swivel Repair Kit (pre-1998) Swivel Repair Kit (1998-present) 8.710-115.0 8.710-117.0 8.710-116.0 8.710-118.0 8.710-119.0 8.710-121.0 8.710-122.0 8.710-123.0 Old No 344006 344006RED 344006BLU 344010 344011 344014 344014BLK 344014BLU Description Foam Brush Head, Black Foam Brush Head, Red Foam Brush Head, Blue Foam Hose (12') Foam Hose (15') Lance 40", Red Lance 40", Black Lance 40", Blue Foam Brush and Accessories Foam Brush Head 3" x 10" supersoft flagged bristle fountain brush. Choose from black, red or blue. Foam Brush Lance 40" long with 30" insulated grip, 3/8" FPT inlet, 1/2" MPT outlet (matches brush inlet). Colors: red, blue, or black. Brush Hoses Clear, spiral wire braid, 1/2" ID with 3/8" MPT, zinc-plated steel fittings both ends. Car Wash Booms - “Reflex” The performance leader!

CAR WASH BAY ACCESSORIES Stainless-Steel Bay Accessories Foam brush boom holder, wand holders, mat clamps. Fuses Part No 8.708-786.0 Old No 260324 Description Transformer fuse 5 Amp (For P/N 260312) Medium-Pressure Swivels Part No 8.708-880.0 8.708-881.0 8.708-882.0 8.708-883.0 Old No 260600 260605 260606 260610 Description Standard Foam Brush Holder Rigid Wall Mount Wand Holder Flex Bottom Mount Wand Holder Mat Clamp ! 1000 PSI ! 7/16" flow-thru opening ! All-brass body ! Bronze-thrust bearing ! Buna seals (non-repairable) ! 1/2" FPT x 1/2" MPT Locks for Meter Boxes Part No 8.705-057.0 Old No 140094 Description Swivel Low-Pressure Swivels 8.708-731.0 Part No 8.708-731.0 8.708-730.0 Old No 260064 260062 8.708-730.0 Description Disk Lock (Master Brand) Tubular Cam Lock ! 300 PSI swivel action ! Brass MPT ! Zinc-chromate steel FPT Part No 8.705-054.0 8.705-056.0 8.705-055.0 Rotary Switch - 8-Position Metal car wash switch. ! Double stack 8-position ! Metal ! Much more durable than cheaper plastic switches ! Direct replacement for Electroswitch 31302A-S and NU32LA ! Make before break functions Part No 8.708-729.0 Old No 260061 Description 8-Position Rotary Switch Old No 140085 140087 140086 Description 1/4" FPT x 1/4" MPT 3/8" FPT x 3/8" MPT 1/2" FPT x 1/2" MPT Flex Lances ! 2500 PSI ! 200°F ! Flexes 180° and returns ! Prevents bent lances and broken hoses ! Industrial-grade polyurethane flex section ! Perfect for self-serve car wash bays ! 1/4" galvanized pipe end sections Part No Transformers 8.710-600.0 8.710-601.0 8.710-603.0 8.710-604.0 8.710-598.0 Old No 368119BLK 368119BLU 368121 368124 368118 Length / Color Description 18" Black 18" Blue 21" Red 24" Red 18" Red 1/4" MPT x 1/8" FPT 1/4" MPT x 1/8" FPT 1/4" MPT x 1/8" FPT 1/4" MPT x 1/8" FPT 1/4" MPT x 1/4" MPT 8.708-780.0 8.708-784.0 Part No 8.708-780.0 8.708-781.0 8.708-783.0 8.708-784.0 Old No 260311 260312 260315 260316 Description 115-24V AC: 600 MIL/AMP 115/208/230-24V AC: 100V A Fused 120/208/240-24V AC: 50V A 120/208/240- 24V A Not Fused Page 178

CAR WASH BAY ACCESSORIES Vacuum Accessories May slip directly on to hose. Use with swivel cuffs for better results. Wash Gun - RB65 Low-pressure spray gun with straight jet and adjustable cone from the trigger with adjustable screws to alter cone angle wideness from 0° to 60°. Vacuum Claw Nozzle Part No. 1-1/2" Old No 8.708-893.0 8.708-892.0 8.708-891.0 8.708-890.0 Couplings Part No 8.708-896.0 8.708-898.0 Adapter Car Wash Vacuum Hose CW150 and CW200 Part No 8.708-900.0 8.708-904.0 Vacuum Nozzles Old No 260924 260942 Description 2" Hose x 1-1/2" Wand 2" Hose x 2" Wand ! Recovers immediately from crush ! Tough and durable ! Resists ultraviolet rays and abrasion ! Smooth interior bore for max air flow ! CW150 = 1-1/2"; CW200 = 2" Part No Part No 8.708-901.0 8.708-902.0 Old No 260932 260934 Cuffs, Hose to Tank AP Vacuum Motors Part No 8.708-903.0 8.708-904.0 8.708-905.0 8.708-906.0 Old No 260940 260942 260944 260946 Description 1-1/2" x 1-1/2" 2" x 2" 1-1/2" x 1-1/2" Swivel 2" x 2" Swivel 8.625-841.0 Part No 8.620-204.0 Description Two Fan Stages, Bypass Motors 8.625-841.0 5.7" Diameter, 120V Double Ball Bearing, Peripheral Discharge Vault system Vac Motor: 120V Double Ball, Bearings, Tangent Discharge Three Fan Stages, Bypass Motors 8.625-842.0 5.7" Diameter, 120V Double Ball Bearings, Tangent Discharge 8.620-204.0 8.625-842.0 Description 1-1/2" x 1-1/2" x 5-1/4" 2" x 2" x 5-1/2" Degree 45° 45° 8.708-907.0 8.708-909.0 8.708-910.0 8.708-917.0 8.708-919.0 8.708-920.0 Old No 260950 260954 260956 260962 260966 260968 Size 1.5" x 15' 1.5" x 25' 1.5" x 50' 2" x 15' 2" x 25' 2" x 50' ULTIMATE CRUSH-PROOF The most flexible, easy-to-handle vacuum hose ever! 260917 260916 260915 260914 Part No. 2" 8.708-895.0 8.708-894.0 8.708-897.0 8.708-899.0 Old No 260919 260918 260921 260923 Color Orange Yellow Black Gray ! 195°F ! 16 GPM ! Completely sealed ! Ergonomic ! Adjustable jet cone ! Trigger protection ! Brass body ! Inlet connection swivel ! 350 PSI-rated pressure Old No 260920 260922 Description 1-1/2" 2" Part No 8.710-449.0 8.710-448.0 Old No 353265 353264 Description PA RB65 w/ Awivel PA RB65 No Swivel Page 179

CAR WASH BAY ACCESSORIES Ametek-Lamb Vacuum Motors Part No Description Two Fan Stages, Bypass Motors 8.685-502.0 8.685-442.0 5.7" Diameter, 120V Double Ball Bearing, Peripheral Discharge Vault system Vac Motor: 120V Double Ball, Bearings, Tangent Discharge Three Fan Stages, Bypass Motors 8.685-458.0 5.7" Diameter, 120V Double Ball Bearings, Tangent Discharge 8.685-502.0 Connector Hose / Car Wash Bay Hose – 12'-25' All car wash bay hoses come with solid male pipe on both ends. 8.685-442.0 8.685-458.0 Part No Length 3/8" Black – 1 wire 8.918-333.0 8.918-334.0 8.918-336.0 8.918-338.0 8.918-340.0 8.918-342.0 8.918-344.0 8.918-348.0 12' 13' 14' 15' 16' 17' 18' 20' PSI 4000 4000 4000 4000 4000 4000 4000 4000 Part No Part No 1/4" Black – 1 wire 8.918-312.0 8.918-322.0 8.918-329.0 8.918-331.0 Length 15' 20' 24' 25' PSI 3000 3000 3000 3000 3/8" Blue – 1 wire 8.918-360.0 8.918-362.0 8.918-364.0 8.918-366.0 8.919-124.0 8.918-369.0 8.918-371.0 8.918-373.0 8.918-375.0 8.918-377.0 8.918-379.0 8.918-381.0 8.918-383.0 8.918-385.0 Length 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' PSI 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 Part No Length 1/4" Blue – 1 wire 8.918-387.0 8.918-389.0 8.918-391.0 8.918-393.0 8.918-395.0 8.918-397.0 8.918-399.0 8.918-401.0 8.918-403.0 8.918-405.0 8.918-407.0 8.918-409.0 8.918-411.0 8.918-413.0 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' PSI 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 Page 180

CAR WASH BAY ACCESSORIES Solenoid Valves ! Air ! Light oil ! Professional car washes ! Chemicals Water Solenoid Valves 2-way, normally closed. The S211 Series Standard Water Valves have reliable piloted diaphragm construction with proven performance over decades of use. Featuring stainless-steel seats, the S211 Series typically requires 4 or 5 PSI pressure differential to open. The S201 Series Zero Differential Valves are constructed with the same materials, but are capable of operating with the same amount of pressure on both sides of the valve. Both valve types are often utilized in the car wash industry. Chemical Solenoid Valves 2-way, normally closed.For decades, car wash industry professionals have chosen the rugged S301 and S311 Series Valves because of their compact size and long life. Available in 1/8", 1/4" and 3/8" NPT designs, these valves are used in air, water and chemical applications. ! Low pressure steam ! Other industrial applications High-pressure Solenoid Valves 2-way, normally closed. The S401 High-Pressure Valves are compact, dependable and specially designed by ITT to meet car wash applications up to 1400 PSI. Best Buy Normally Open Solenoid Valves for Car Wash Anti-Freeze Applications. These valves provide long life and reliable performance in the “make or break” anti-freeze systems of car washes. The S202 and S212 Series Diaphragm Valves feature non-wicking, fabric-reinforced diaphragms, which eliminates premature diaphragm failures, as well as stainless-steel upper seats, which prevents seat deterioration often associated with brass-seated valves. The S202 Series Diaphragm Valve incorporates the zero-operating pressure design discussed above; the S212 Series is a piloted diaphragm, and the S402 Series is a piloted piston valve. Solenoid Valve Specifications – continues on next page Body Seals Mode BR = Brass SS = Stainless-steel Part No 8.708-805.0 8.708-806.0 8.708-807.0 8.708-808.0 8.708-810.0 8.708-811.0 8.708-812.0 8.708-813.0 8.708-820.0 8.708-821.0 8.708-822.0 8.708-823.0 8.708-824.0 8.708-825.0 8.708-826.0 8.708-827.0 8.708-828.0 8.708-829.0 8.708-830.0 8.708-814.0 8.708-815.0 8.708-816.0 8.708-817.0 8.708-818.0 8.708-819.0 8.708-831.0 8.708-832.0 8.708-833.0 8.708-834.0 8.708-835.0 8.708-836.0 Old No 260450 260451 260452 260453 260454 260455 260456 260457 260464 260465 260466 260467 260468 260469 260470 260471 260479 260480 260481 260458 260459 260460 260461 260462 260463 260482 260483 260484 260485 260486 260487 B = Buna V = Viton GC Part No. S201-CG4 S201-CG4 S201-DG4 S201-DG4 S201-EG5 S201-EG5 S201-FG9 S201-FG9 S211-CG4 S211-CG4 S211-DG4 S211-DG4 S211-EG5 S211-EG5 S211-FG9 S211-FG9 S301-AD5 S301-BD7 S301-BD7 S202-CG4 S202-CG4 S202-DG4 S202-DG4 S202-EG5 S202-EG5 S301-BD7 S301-BD7 S401-Z S401-Z S401-Z S401-Z Type N/O = Normally Open N/C = Normally Closed DA = Direct Acting Port F-NPT / Body 3/8" / BR 3/8" / BR 1/2" / BR 1/2" / BR 3/4" / BR 3/4" / BR 1" / BR 1" / BR 3/8" / BR 3/8" / BR 1/2" / BR 1/2" / BR 3/4" / BR 3/4" / BR 1" / BR 1" / BR 1/8" / BR 1/4" / BR 1/4" / BR 3/8" / BR 3/8" / BR 1/2" / BR 1/2" / BR 3/4" / BR 3/4" / BR 1/4" / SS 1/4" / SS 3/8" / SS 3/8" / SS 1/2" / SS 1/2" / SS Orifice .312" .312" .438" 438" .593" .593" .760" .760" .625" .625" .625" .625" .750" .750" 1.00" 1.00" .101" .109" .109" .281" .281" .438" .438" .593" .593" .125" .125" .350" .350" .500" .500" Oper PSI 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 125 150 150 150 150 150 150 150 150 150 150 1200 1200 1200 1200 Page 181 PD = Piloted Diaphragm PP = Piloted Piston Seals B B B B B B B B B B B B B B B B B B B B B B B B B V V V V V V Mode N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C N/O N/O N/O N/O N/O N/O N/C N/C N/C N/C N/C N/C Type / AC Volts PD / 24 PD / 110 PD / 24 PD / 110 PD / 24 PD / 110 PD / 24 PD / 110 PD / 24 PD / 110 PD / 24 PD / 110 PD / 24 PD / 110 PD / 24 PD / 110 DA / 110 DA / 24 DA / 110 PD / 24 PD / 110 PD / 24 PD / 110 PD / 24 PD / 110 DA / 24 DA / 110 PP / 24 PP / 110 PP / 24 PP / 110 DEMA Equiv A413P-24 A413P-110 A414P-24 A414P-110 A416P-24 A416P-110 A418P-24 A418P-110 473P-24 473P-110 474P-24 474P-110 476P-24 476P-110 — — 491P-110 401P-24 401P-110 0412P-24 0412P-110 0A414P-24 0A414P-110 0A416P-24 0A416P-110 424-2-24 424-2-110 453P-24 453P-110 454P-24 454P-110

CAR WASH BAY ACCESSORIES Replacement/Repair Kits for Solenoids Valves – continued Old No Part No 8.708-837.0 8.708-838.0 8.700-214.0 8.700-215.0 8.700-216.0 260488 260489 074801 074802 074806 Description 24V AC Coil 110V AC Coil Repair Kit – S301–1/4" valves (Buna) Repair Kit – S201–3/8" and 1/2" valves (Buna) Repair Kit – S202–3/4" valves (Buna) Part No 8.700-217.0 8.700-218.0 8.700-219.0 8.700-220.0 8.700-221.0 Old No 074807 074808 074809 074810 074812 Description Repair Kit – S301–1/4" valves (Viton) Repair Kit – S401–3/8" and 1/2" valves (Viton) Repair Kit – S211–3/8" and 1/2" valves (Buna) Repair Kit – S211–3/4" valves (Buna) Repair Kit – S211– 1-1/4", 1-1/2" and 2" valves (Buna) Kip Solenoids ! Reliable over years of use ! Millions of cycles life not unusual ! All with FPT ports ! N/O = Normally Opened ! N/C = Normally Closed ! N/A= Not Adjustable ! C/A = Chemical Adjustment Part No Stainless-steel 8.708-846.0** 8.708-847.0** 8.708-849.0 8.708-851.0 8.708-852.0* 8.708-853.0 8.708-855.0 8.708-856.0 8.708-857.0* 8.708-858.0* Old No 260511 260515 260520 260525 260526 260530 260534 260535 260536 260537 Brass Solenoid Valves – Kip 8.708-863.0* 8.708-864.0* Parts 8.708-859.0 8.708-860.0 8.708-862.0 8.708-861.0 260546 260547 260538 260539 260542 260541 N/C N/O N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C Coil Only 120V Coil Only 24V Coil Only 24V Repair Kit N/C 1/4" *Conduit Body Style w/ wire leads **Wire Leads Solenoids w/ Built-In Strainer For pressure lines and pressure systems only. Brass Valves – Diaphragm Style ! Normally closed valve operation ! Rated to 200°F fluid and 120°F ambient ! Proven design features for reliable performance on all applications ! Operates in any position, but do NOT mount valve with coil under valve Celcon Plastic Valves - Super for strong chemicals. ! Diaphragm style with Y-screen (S.S.) ! Molded coil CSA-approved ! Compact design — 1/4" spade connects ! Normally closed operation ! 125 PSI ! 180°F ! 1/4" FPT, 1/4" orifice Part No 8.711-249.0 8.711-250.0 8.711-252.0 8.711-253.0 Part No 8.708-869.0 8.708-870.0 8.708-871.0 8.708-872.0 8.708-873.0 8.708-874.0 Page 182 Old No 396115 396116 396119 396120 Old No 260560 260561 260562 260566 260567 260568 DEMA No. 442P 442P 443P 443P DEMA No. P442 P442 P442 P443 P443 P443 FPT 1/4" 1/4" 3/8" 3/8" FPT 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" Orifice .25 .25 .25 .25 1 Orifice .25 .25 .25 .25 .25 .25 PSI 125 125 125 25 PSI 125 125 125 125 125 125 Voltage 24V AC 110V AC 24 V AC 110V AC Voltage 24V AC 110V AC 12V AC 24V AC 110V AC 12V DC FPT 1/4" 1/4" 1/8" 1/4" 1/4" 1/8" 1/4" 1/4" 1/4" 1/4" 1/8" 1/8" Voltage 24V AC N/A 24V AC N/A 24V AC N/A 24V AC C/A 24V AC C/A 24V AC C/A 120V AC N/A 24V AC N/A 120V AC N/A 24V AC N/A 240V AC N/A 120V AC N/A Wire Leads Wire Leads Spade Term 8.708-846.0 8.708-849.0 Orifice ID .062 .062 .062 .093 .093 .093 .093 .062 .062

CAR WASH BAY ACCESSORIES Aqua Master™ Model 440 Liquid level proportioning controls — automatically maintain drum level and chemical concentration. The Aqua Master automatically maintains a desired level of proportioned mixture in a drum, tank or other type reservoir. Magnetically activated “snap acting” float valves provide full water flow to activate the chemical proportioners. There are two basic sizes to give a choice of water flows as shown in the table below. Chemical feed rate is adjusted by metering screw or threaded metering tips. The compact 440 float valve is made of Celcon ® plastic and is easily accessible for field maintenance. Liquid-level proportioning controls are available in two flow capacities, 4 and 22 GPM at 50 PSI. Either size can be used with or without a proportioner. The proportioner allows chemical to be inducted while the valve is open. All models, except as noted, are equipped with siphon breakers to prevent backflow into the fresh water line. The proportioner discharge is provided with means for attaching a hose or piece of pipe for under water feeding to minimize sudsing. Model 440-23BT 440-23T 440-24 437-21 Description Proportioning Valve, 4 GPM Flow at 50 PSI, Medium Capacity Proportioning Valve, 4 GPM Flow at 50 PSI, High Capacity Proportioning Valve, 4 GPM Flow at 50 PSI, Highest Capacity Proportioning Valve, 22 GPM Flow at 50 PSI, Medium Capacity *Oz / Gal of 1 CPS Fluid (ie, Viscosity of Water) Part No 8.710-525.0 8.710-524.0 8.710-526.0 8.710-532.0 8.710-534.0 Old No 360382 360381 360383 360397 360399 Description 440-23BT 440-23T 440-24 437-21 Optional Tips Capacity 12* 35* 70* 10* Erie Motortrol Valve ® Proportioners ! Three-way valve to switch hot and cold inlets to single outlet ! 1/2" MPT (all three) ! 24V AC Designed to blend liquid chemical concentrates with water (flowing at normal city water pressure) to create an accurate mix of diluted chemicals. Complete with metering orifice set and/or metering adjustment valve. Part No 8.708-879.0 Old No 260580 Description Motortrol Valve 1 CPS = Viscosity of Water 75 CPS = Viscosity of SAE 10 oil 220 CPS = Viscosity of SAE 30 oil Model Description 163H* Part No 8.710-530.0 8.710-529.0 8.700-226.0 8.710-534.0 Page 183 1 CPS 24 64 Capacity MAX BLEND RATE = Oz Chem Per Gal Water MODEL No. 162 *High-concentration chemical blender Old No 360393 360392 074903 360399 Description #162 Drum Mount with Proportioner #163H High Concentrate Proportioner Low Side Polypropylene Foot Valve Optional Tips 75 CPS 14 30 220 CPS 6 14

PARTS WASHER PARTS Seals & Gaskets Old No Part No. 8.712-860.0 8.713-319.0 8.714-344.0 8.714-345.0 8.714-341.0 8.714-346.0 8.714-350.0 8.714-342.0 8.714-347.0 8.714-351.0 8.714-343.0 500.110 500.770 502.426 502.427 502.423 502.428 502.432 502.424 502.429 502.433 502.425 NOTE: 502.644 is replacing 501.782 Description Seal - Edge Guard, Vinyl (Pebble Finish) Seal - Bulb Type Side Profile, NBR Rubber, 7230 Seal - Door Bottom 7530 (ECH Rubber 60 Duro(A)) Seal - Door Bottom 7650,7660 (ECH Rubber 60 Duro(A)) Seal - Door Cabinet Side 7530 (ECH Rubber 60 Duro(A)) Seal - Door Cabinet Side 7650 (ECH Rubber 60 Duro(A)) Seal - Door Cabinet Side 7660 (ECH Rubber 60 Duro(A)) Seal - Door Latch Side 7530 (ECH Rubber 60 Duro(A)) Seal - Door Latch Side 7650 (ECH Rubber 60 Duro(A)) Seal - Door Latch Side 7660 (ECH Rubber 60 Duro(A)) Seal - Door Top 7530 (ECH Rubber 60 Duro(A)) Unit FT FT EA EA EA EA EA EA EA EA EA Filters & Baskets Old No Part No. 8.705-952.0 8.714-474.0 8.731-254.0 200.161 502.650 200.162 Description Unit Bag - Filter 150 Micron, Nylon, 18” x 14”, 1816, 7220 Bag - Filter 100 Micron, Krystle Klear, 8” x 30” Basket - Small Parts, 8” x 8” x 4” EA EA EA 8.705-952.0 Heating Elements & Thermostats 8.712-813.0 Part No. 8.716-653.0 8.712-813.0 8.712-954.0 8.713-030.0 8.713-723.0 8.713-593.0 Old No 502.379 500.045 500.238 500.338 501.348 501.148 Description Heating Element - 1250 W 120V Heating Element - 4.5 KW 230V 1”, 1PH 1” NPT Heating Element - 9 KW 230V, 3PH 2” NPT Thermostat - Bulb & Capillary - 195°F (For 3-Phase Machines) Heating Element - 2 KW 120V Thermostat - S-p DBC 180°F Unit EA EA EA EA EA EA 8.713-030.0 8.713-593.0 Handles Part No. 8.712-818.0 9.804-203.0 Old No 500.054 Description Unit Handle - Lid/Door (Glass Reinforced Nylon-Black) (7” O.C. Hole Pattern) 500.521 Handle - Door/Strainer (Small) Lid Supports Part No. 8.712-817.0 8.713-317.0 8.714-540.0 Old No 500.053 500.767 502.820 Description Gas Spring - Strut (40A) - 7230 Gas Spring - Strut - 7689 Gas Spring - Strut - 7320 / 2003 Unit EA EA EA EA EA ! Non-conductive ! Non-corrosive 8.712-818.0 Page 184

PART WASHER PARTS Turntable Drive Components Heavy duty. Part No. 8.713-730.0 8.725-371.0 8.725-437.0 8.714-009.0 8.714-008.0 9.804-423.0 8.712-903.0 8.713-320.0 8.712-858.0 8.713-956.0 8.713-957.0 8.714-372.0 8.712-988.0 9.804-347.0 9.804-346.0 8.712-920.0 Old No 501.356 Description Gearmotor - AC Fractional 733x & Larger Gearmotor - APW 501.882 501.881 501.794 500.165 500.771 500.108 501.775 501.776 502.466 500.284 500.060 500.059 500.192 Replacement Capacitor for 8.725-371.0 Torque Limiter - Large Size Torque Limiter - Standard Size Spring - Compression (864) .875OD x 2.5 L x .120 Spring - Compression .105 x 1.125 x 3.5 Chain w/ Connector Link 7320 Chain w/ Connector Link 7230 Chain w/ Connector Link (7530) Chain w/ Connector Link (7650, 7660) Chain w/ Connector Link 773x, Nickel Plated Chain w/ Connector Link 786x, Nickel Plated Bearing - Ball (Lower Turntable) Doubled Sealed Bearing - Ball (Upper Turntable) Doubled Sealed Bearing - Taper Roller Turntable 773x, 774x, 786x Unit EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA 8.714-008.0 8.712-858.0 9.804-423.0 8.712-903.0 9.804-347.0 9.804-346.0 Timers & Switches Easy to use and durable. 8.713-328.0 9.804-119.0 Part No. 8.713-357.0 8.712-832.0 8.712-833.0 9.804-119.0 9.804-118.0 9.804-120.0 8.714-018.0 8.713-328.0 8.749-212.0 9.804-510.0 8.713-631.0 Old No 500.822 500.074 500.075 6-02071 6-02072 6-02073 501.903 500.787 500.811 500.421 501.208 Description Timer - 30 Min Spring Wound, Oil skimmer Timer - 60 Min Spring Wound, Wash Timer - 12 Hour Spring Wound, Heater Switch - Magnetic Reed Sensor N.C. Switch - Magnetic Reed Sensor N.O. Magnet - Reed Sensor Target Switch - Rocker (Round), TT On/Off (7230) Switch - Lighted Rocker, Skimmer/TT On/Off Switch - Limited, Enclosed Switch - (Lid/Door) 15 Amp Timer - Plug-In 20A, 7 Day 24 Hour Unit EA EA EA EA EA EA EA EA EA EA 9.804-510.0 Page 185

PARTS WASHER PARTS Pumps & Pump Seals Heavy duty. Part No. 8.715-395.0 8.715-413.0 8.715-414.0 8.715-421.0 8.715-422.0 8.735-011.0 8.714-473.0 8.713-359.0 8.713-360.0 8.714-320.0 Old No 500.000 500.303 500.469 500.185 500.470 500.305 502.649 500.824 500.825 502.381 Description Pump - 1.0 HP 115/230V 1PH Cent Horz Sealed Pump - 3.0 HP 115/230V 1PH Cent Vert Sealless Pump - 3.0 HP 230/480V 3PH Cent Vert Sealless Pump - 5.0 HP 115/230V 1PH Cent Vert Sealless Pump - 5.0 HP 230/480V 3PH Cent Vert Sealless Pump - 7.5 HP 230/480V 3PH Cent Vert Sealless Seal - Pump (126) 2 Pc Viton-Silicon-Carbide (Kit) Includes O-Ring Seal - Pump (126) 2 Pc Buna-Ceramic Model 126 Pump O-Ring, Buna, Model 126 Pump Throttle Bushing - 3PH - 5PH Unit EA EA EA EA EA EA EA EA EA Detail Components 8.712-778.0 9.804-091.0 Part No. 8.712-778.0 9.804-091.0 8.712-810.0 8.712-835.0 Old No 500.004 500.049 500.041 500.077 Description Pump - Air Powered Diaphragm Brush - Polyplow (Flo-Thru) Regulator - 1/4” NPT Steel Cup Brush Unit EA EA EA EA 8.712-810.0 Nozzles ! 1/4” MNPT ! Hardened Steel Part No. 8.714-202.0 8.712-777.0 8.712-775.0 8.712-973.0 Old No 502.187 500.003 500.001 500.265 Description Nozzle - 80° #3 Nozzle - 50° #3 Nozzle - 50° #4 Nozzle - 50° #6 Unit EA EA EA EA Page 186

PART WASHER PARTS Measuring Cups End the guessing game. ! Cups are calibrated for exact measurements Part No 8.697-021.0 8.697-024.0 8.697-023.0 Description Measuring Cups – 16 oz Measuring Cups – 8 oz Measuring Cups – 4 oz Water Leveling System Part No. Old No 9.804-095.0 8.712-946.0 500.114 500.225 Description Unit Float - Poly Cylindrical (1-1/2” x x3-3/4”) Water Level Float - Poly Cylindrical 2-3/4” Dia x 1-3/4” H, LWS EA EA Contactors & Relays Part No. 8.713-011.0 8.714-331.0 8.714-330.0 8.713-044.0 8.713-045.0 8.713-649.0 Old No 500.316 502.406 502.405 500.355 500.356 501.241 Description Contactor - 3 Pole (C09), 9 Amp Inductive Contactor - 3 Pole (C12), NC Aux Contacts 12 Amp Inductive Contactor - 3 Pole (C16), NC Aux Contacts 16 Amp Inductive Contactor - 3 Pole (C16), 16 Amp Inductive Contactor - 3 Pole (C23), 30 Amps Relay - Power (25A DPDT) Surface Mount 8 Term for 110V, 7220 Unit EA EA EA EA EA EA 8.713-011.0 Skimmer Components Part No. 8.904-676.0 Old No 500.687 Description Unit Gearmotor - AC Fractional 6 RPM 1.03 Amp Skimmer/Drive w/ Fan EA 8.904-676.0 Page 187

PARTS WASHER PARTS Fuses ! Full range of fuses Old No Part No. 8.749-237.0 8.713-912.0 8.713-078.0 8.713-288.0 8.713-369.0 8.713-574.0 8.713-291.0 8.713-652.0 8.749-432.0 502.206 500.796 500.391 500.712 500.847 501.119 500.715 501.244 500.708 ! Protect your equipment Description Fuse - 1 Amp (ABC) Fuse - 10 Amp Elec. Panel 1PH Fuse - 2 Amp Fuse - 20 Amp Fuse - 25 Amp Fuse - 3 Amp Fuse - 30 Amp Fuse - 40 Amp Fuse - 50 Amp Unit EA EA EA EA EA EA EA EA EA 8.713-066.0 8.713-067.0 8.713-063.0 8.713-064.0 8.713-775.0 8.713-529.0 500.379 500.380 500.376 500.377 501.434 501.055 Fuse - Class CC 10 Amp Fuse - Class CC 12 Amp Fuse - Class CC 15 Amp Fuse - Class CC 3 1/2 Amp Fuse - Class CC 6 Amp Fuse - Class CC 8 Amp EA EA EA EA EA EA 8.713-686.0 8.713-080.0 8.713-912.0 8.713-286.0 8.713-293.0 8.713-920.0 8.713-284.0 8.713-878.0 501.296 500.393 501.650 500.709 500.717 501.662 500.707 501.590 Fuse - Class R 1 1/2 Amp Fuse - Class R 1 Amp Fuse - Class R 10 Amp Fuse - Class R 2 Amp Fuse - Class R 20 Amp Fuse - Class R 3 Amp (1) Fuse - Class R 30 Amp Fuse - Class R 8 Amp EA EA EA EA EA EA EA EA Decals & Labels Oil, grease and solvent resistant. 8.714-068.0 Part No. 9.804-224.0* 9.804-352.0* 8.904-661.0* 8.713-298.0* 8.714-071.0* 9.804-223.0* 9.804-372.0* Old No 500.290 500.123 502.342 500.726 501.988 500.256 500.334 *items ship from Camas, WA Description Decal - Caution (Check Water Level…) Decal - Danger High Voltage (All 230V, 460V, 575V) Decal - Door Graphic, 12” x 22” (7732, 7742, 7862) Decal - Front Sump 723x Decal - Level Gauge (7530, 7650, 7662) Decal - Operator Instruction (All Models) Decal - Warning, Yellow & Black (All 230V, 460V, 575V) Unit EA EA EA EA EA EA EA Misc Replacement Parts Old No Part No. 8.713-037.0 8.712-939.0 8.749-200.0 500.347 500.213 500.133 Description Wheel - Polyolefin 4” x 2” (Top Load) Pin - Clevis 3/4” x 3-1/2” (Top Load) Pin - Clevis 5/8” x 2-1/4” Unit EA EA EA Page 188

AG SPRAY ACCESSORIES Hypro Roller Pumps Ideal for farm sprayers, pest control and chemical application usage. ! Housings available in cast-iron, Ni-resist or silver series Part No. ! Self-priming operation; roller pumps should not be run dry ! Adaptable to PTOs or gas engines ! Standard seals are Viton or Buna ! Standard super rollers provide the chemical resistance of nylon and long life of polypropylene ! Rotation is determined by looking at shaft end of pump ! Counter-clockwise is standard on all except 4001 and 4101 Series ! Maximum fluid temperature is 140° 8.702-278.0 8.702-281.0 8.702-259.0 8.702-280.0 8.702-261.0 8.702-263.0 8.702-262.0 8.702-264.0 8.702-282.0 8.702-283.0 8.702-286.0 8.700-082.0 Old No 100814 100817 100778 100815 100784 100784R 100784N 100784X 100819 100819R 100823R 069665 Model No. 4001C 4101C 4101N 4001XL 6500C 6500C-R 6500N 6500XL-R 7560C 7560C-R 7560N-R NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last Housing CI CI N SL CI CI N SL CI CI N Shaft Adapter (5/8" to 3/4") Rotation Shaft dia No. of Rollers CW CW CW CW CCW CW CCW CW CCW CW CW 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 15/16" 15/16" 15/16" 4 4 4 4 6 6 6 6 8 8 8 Seals V V V V V V V V V V V Performance Tables Series 4001 ! Max PSI 150 Pressure in PSI 50 100 125 150 Series 6500 ! Max PSI 300 Pressure in PSI 50 100 200 300 Series 4101 ! Max PSI 150 Pressure in PSI 50 100 125 150 Series 7560 ! Max PSI 300 Pressure in PSI 50 100 200 300 ! Max GPM 9 GPM @1,100 RPM 4.4 3.8 3.5 3.3 ! Max RPM 1,800 HP .24 .41 .50 .62 GPM@1,400 RPM 5.9 5.3 5.0 4.8 HP .32 .56 .68 .78 GPM@1,800 RPM 8.0 7.3 7.0 6.7 HP 0.46 0.78 0.95 1.10 ! Max GPM 18.2 GPM@1,100 RPM 8.0 7.2 5.6 4.3 ! Max RPM 1,000 HP 0.38 0.68 1.29 1.91 GPM@1,400 RPM 16.5 15.4 14.0 12.7 HP 0.71 1.26 2.34 3.47 GPM@1,800 RPM 20.1 19.1 17.3 15.7 HP 0.90 1.51 2.84 4.17 ! Max GPM 7 GPM@1,100 RPM 4.5 3.9 3.7 3.4 ! Max RPM 2,600 HP 0.34 .56 .68 .78 GPM@1,400 RPM 5.60 5.0 .82 4.40 HP .40 .68 .82 .96 GPM@1,800 RPM 6.6 6.0 5.7 5.4 HP 0.46 0.76 0.92 1.08v ! Max GPM 22.5 GPM@1,100 RPM 11.1 10.3 8.6 7.1 ! Max RPM 1,000 HP 0.74 1.25 2.26 3.30 GPM@1,400 RPM 17.5 16.9 15.5 18.9 Page 189 HP 1.26 1.95 3.40 5.30 GPM@1,800 RPM 22.0 21.3 20.0 18.0 HP 1.78 2.53 4.20 6.10

AG SPRAY ACCESSORIES Flojet Diaphragm Pump Built-in pressure switch automatically starts and stops pump instantaneously. ! Can run dry without damage ! Excellent self-priming capability ! Low-current draw Part No. 8.702-325.0 8.702-328.0 8.702-312.0 8.702-337.0 8.702-331.0 8.702-329.0 Old No 100879 100884 100863 100895 100888 100884A Flojet Model No. 2135-561 4300-142A 2100-032 2100-022A 4300-042 4300-043A * B = Buna V = Viton E= EPDM S = Santoprene NOTE: These units are designed to withstand many harsh chemicals. However, because compounds and concentrations of materials pumped through these units are beyond the manufacturer’s control, the manufacturer DOES NOT PROVIDE A WARRANTY on the wet-end of the pump. 12V DC 12V DC 115V 115V 115V 115V Power Max Flow Max PSI 1.48 3.30 1.85 1.85 3.70 4.70 60 40 50 50 35 35 3/8" FPT 1/2" Barb 3/8" FPT 3/8" FPT 1/2" Barb 1/2" Barb Ports B S S V S S Diaphragm* Valves* V E S V E E Diaphragm Pump Units 1.00-3.8 GPM integrated pump motor units. Powered by 12V DC or 115V AC power. Pumps are standard with Santoprene diaphragms and Viton valves for excellent service with a wide variety of sprayable products. NOTE: Flow is reduced as pressure is increased (i.e. 100850 pumps 1.12 GPM @ 60 PSI) Automatic demand control on/off. ! Chemical-resistant materials ! Can run dry without damage Part No. 8.702-294.0 8.702-304.0 8.702-300.0 8.702-296.0 8.702-335.0 8.702-302.0 8.702-311.0 8.702-307.0 8.702-306.0 8.702-334.0 8.702-308.0 8.702-338.0 Old No 100841 100854 100850 100844 100893 100852 100862 100857 100856 100892 100858 100896 8.702-303.0 8.702-301.0 8.702-310.0 100855 100853 100851 100861 ! Self-priming ! Low-Amp draw Shurflo Model No. 8000-541-236 8000-343-236 8000-543-236 8000-543-238 8030-813-239 8002-793-238 8000-532-256 8000-033-236 8000-533-236 8000-812-288 8000-813-238 8000-713-238 2088-343-135 2088-313-145 2088-712-244 2088-394-154 ! Automatic demand pressure switch or internal bypass Power Max Flow Max PSI Demand 12V DC Demand 12V DC Demand 12V DC Demand 12V DC Demand 12V DC Demand 12V DC Demand 115V Demand 115V Demand 115V 115V Bypass Demand 115V Demand 115V 2088 Premium Series – self-primes up to 12 foot – Built-in Back Check 8.702-305.0 Demand 12V DC Demand 12V DC Demand 12V DC Demand 115V 4111 – Double Head 8.702-339.0 166 – Air Drive 8.702-317.0 8.702-318.0 100899 100870 100871 *S = Santoprene V = Viton E= EPDM NOTE: These units are designed to withstand many harsh chemicals. However, because compounds and concentrations of materials pumped through these units are beyond the manufacturer’s control, the manufacturer DOES NOT PROVIDE A WARRANTY on the wet-end of the pump. 4111-035 166-200-56 166-200-36 Demand 12V Demand AIR Demand AIR 1.0 1.2 1.8 1.4 1.5 1.7 1.0 1.0 1.4 1.4 1.6 1.6 3.0 3.6 3.8 3.2 7.0 2.0 2.0 Ports 60 60 60 100 150 100 60 60 60 100 100 100 50 50 50 40 50 60 60 Diaphragm* 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 1/2"-14M 1/2"-14M 1/2"-14M 1/2"-14M 1/2"-14M 3/8" Barb 3/8" Barb Valves* S V S S S S S V S S S S S S S S S E V ® V V V V V E V V V V V E V V E V V E V Page 190

AG SPRAY ACCESSORIES Aquatec 550 Series Diaphragm Pump These pumps can either be controlled by a pressure switch (“demand” mode) or an external power control device. When required, an integrated bypass can be incorporated to help regulate pressure levels. ! Powerful flow rates up to 5.5 GPM/21 LPM at pressures up to 80 PSI/5.5 Bar ! Patented 5-chamber diaphragm and piston design ! Quiet noise levels and with minimal pulsations Part No. 8.750-812.0 Aquatec Model No. 25513-1E11-M638 12V DC GPM 5.3 Max Flow Max PSI 60 1/2" NPT Ports S Diaphragm* Valves* E Industrial Chemical Sprayer Excellent pre-prep chemical applicator. Trigger control, demand flow, wall-mount cabinet, enclosed pump unit pulls chemical from a bulk tank and delivers it through 100' lightweight hose for lowpressure stream/cone or mist application. Operator simply squeezes trigger for instant application. Spraymax Trigger Gun For pest control applications. ! 1000 PSI ! 200° temperature ! Compare to JD-9, Mag-1, Robco and Ges ! Adjusts from fine mist to straight stream ! Drip-free shutoff ! Crafted for all-day comfortable use ! Larger trigger for 4-fingered grip Part No 8.708-995.0 8.709-028.0 Old No 266693 268047 Description With 1/2" Inlet Repair Kit Turbine Series Guns ! Diaphragm pump units ! 60 PSI pressure ! Choice of 12V DC or 110V DC ! 100-foot hose Part No. 8.906-089.0 Old No Wall Mount / Cabinet Sprayer 8.906-090.0 810020 810010 ! Adjustable nozzle for cone mist to straight stream ! Durable Santoprene and Viton-wetted parts Description Motor Chem Applicator 115V AC Chem Applicator 12V DC PSI 60 60 GPM 1.15 1.02 NOTE: These Units are designed to withstand many harsh chemicals. However, because compounds and concentrations of materials pumped through these units are beyond the manufacturer’s control,the manufacturer DOES NOT PROVIDE A WARRANTY on the wet-end of the pump. ! 1200 PSI ! 1/2" BSP male inlet !Weighs only 4 lbs. Part No Trigger Valves Versatile hand-held trigger valves for chemical or water-flow control. ! 1/2" FPT inlet/outlet ! Lock-on trigger loop ! 18.5 GPM ! 700 PSI Part No Old No Aluminum Body – SS/ BR Valve 8.708-982.0 266652 Plastic body – SS/ BR Valve 8.708-983.0 8.708-984.0 266658 266659 Description Trigger Valve – Viton Trigger Valve – Viton Trigger Valve – Buna Part No 8.904-088.0 Page 191 Old No 352940 Description 910 Spot Spray Gun Assembly 8.708-990.0 8.708-989.0 Old No 266680 266676 ! Standard 15 x 1 LRT (4.5mm) ! 62 ft.-reach, straight stream @ 850 PSI 31.5 ft.-reach, full cone @ 850 PSI Description Long Range Turbine Turbine Length 27-1/2" 26-1/2" Forged-brass housings, stainless-steel lances, mist cone to straight stream adjustment, on/off control, lock-on trigger, 1/2" MPT inlet Viton seals, up to 1200 PSI at 140°F. Gun Assembly - 910 Spot Spray High-pressure trigger gun adapted to spot spray application. ! Durable and comfortable ! 12" plated steel lance ! 1/4" hose barb inlet ! #2 blue adjustable nozzle

AG SPRAY ACCESSORIES Trigger-Control Spray Lances Excellent for low-pressure chemical applications up to 150 PSI. Available in either plastic- or brass-lance tube. Works well with neutral, alkaline or mild acid solutions. Trigger-Jet Spray Lances Low-pressure chemical application lance will tolerate mild acid solutions. ! Diaphragm shut-off valve ! Hand-grip trigger control ! Plastic lance tube resistant to acids and agricultural chemicals ! 150 PSI ! Steel trigger and service wrench ! Plastic valve body ! Brass-needle plunger ! Filter screen in nozzle housing ! Standard 11/16" outlet thread for standard low-pressure nozzle Part No. Trigger Lance 8.902-777.0 8.902-778.0 8.708-977.0 8.708-978.0 8.700-493.0 Part No. 8.708-980.0 8.708-981.0 Old No 266606 266607 266603 266610 076700 Old No 266611 266612 266613 ! Cone nozzle adjusts 0-80° ! Accepts the adjustable cone nozzles or standard tip-jet nozzles (11/16 nozzle thread) ! 24" lance — brass or plastic Description Brass w/o Nozzle Plastic w/o Nozzle Plastic w/ Red Nozzle Brass w/ Red Nozzle Needle Valve and Seal Kit Description Adjustable Nozzle – GPM @ 40 PSI / Adjust 0-80° 8.708-979.0 #1 Yellow #2 Red #3 Blue 80° Straight Cone .316 .545 .720 .156 .204 .250 Part No Trigger Lance 8.709-182.0 8.709-183.0 8.709-184.0 Trigger Value Only 8.709-185.0 8.709-186.0 8.709-187.0 Old No 302250V 302251 302252V 302254V 302255V 302256V 8.709-189.0 8.709-190.0 302258 302259 302260 8.709-193.0 8.709-194.0 8.709-195.0 8.709-196.0 8.709-197.0 Brass Pressure Regulator Durable and strong. ! 3/4" FPT outlet ! 120°F temperature ! 10.3 oz weight ! For sprayers pumping up to 15 GPM ! Adjustable pressure ranges ! Stainless-steel spring ! Tee-handle adjustment screw ! 3/4" MPT inlet ! Knurled locknut for ease of locking in adjustment Part No 8.712-557.0 8.712-558.0 Old No 462217 462218 Description 0-300 PSI 300-700 PSI Low-Flow Brass Pressure Regulator Heavy-Duty Swivels Live swivels help prevent twisted and tangled hose. ! 600 PSI ! Brass body and stainless-steel bolt ! Viton seals Part No 8.708-996.0 8.708-997.0 Old No 266700 266701 ! 1/2" MPT inlet and 1/2" outlet Description Swivel 1/2" M x F Swivel 1/2" M x 3/4" FGH Page 192 8.708-996.0 ! For sprayers pumping up to 5 GPM ! Durable and strong brass construction ! Stainless-steel spring ! Positive Viton seal to prevent leakage Part No 8.712-553.0 8.712-554.0 Old No 462207 462208 ! Knurled locknut for easy adjustment ! 1/2" MPT inlet ! 1/2" FPT outlet ! 120°F temperature ! 10.3 oz weight Description 200-650 PSI 0-300 PSI 302263 302265 302266 302268 302272 302274 Description 24" 1/4" FPT inlet, Viton 24" 1/4" HB inlet, EPDM 3/8" Hose Barb, Viton 3/8" HB Inlet/ 11/16" Outlet, Viton 1/4" HB Inlet/ 11/16" Outlet, Viton 1/4" FPT Inlet/ 11/16" Outlet, Viton Parts and Accessories – Trigger Jet Lance 8.709-188.0 Adapter, 11/16" x 11/16" PP 24" Lance Tube only 24" Lance Tube w/ Seals and Fittings Trigger Jet Nozzles – Polypropylene adjust from 0° to 60° Cone 8.709-192.0 Yellow Core(x 3), .23 GPM/ 60 PSI Green Core (x 5), .37 GPM/ 60 PSI Red Core (x 6), .45 GPM/ 60 PSI Gray Core (x 8), .57 GPM/ 60 PSI Brown Core (x 12), .84 GPM/ 60 PSI Orange Core (x 18), 1.2 GPM/ 60 PSI ! Excellent for mild acids or alkali chemicals ! Polypropylene body EPDM seals STD ! 11/16" — nozzle connect outlet Long Range Tip – 15 x 1 – Stainless-Steel Best used with long-range turbine gun. !15 x 1 longrange tip ! Stainless-steel body ! 850 PSI ! 24.4 GPM ! 77 ft. max throw range Part No. 8.708-998.0 8.708-999.0 8.709-000.0 8.709-001.0 8.709-002.0 8.709-003.0 8.709-004.0 Old No 266706 266707 266708 266709 266710 266711 266712 Orifice Dia (mm) 3.5 4.0 4.5 5.0 5.5 6.0 7.0

AG SPRAY ACCESSORIES Nylon Pressure Regulator Maximum corrosion resistance. ! Male inlet/female outlet ! 120°F temperature ! 4 oz weight ! Built to handle up to 15 GPM ! Stainless-steel spring Part No. 8.712-555.0 8.712-552.0 8.712-556.0 Old No 462212 462202 462213 Inlet 1/2" 3/4" 3/4" Outlet 3/4" 3/4" 3/4" ! Positive Viton seal prevents leakage and provides the best chemical resistance ! Knurled locknut for ease of locking in adjustment ! Tee-handle adjustment screw ! Choice of 1/2" or 3/4" inlet/outlet Adjustable Pressure Range 0-250 PSI 0-250 PSI 0-400 PSI Bulkhead Fittings Diaphragm Check Valves – Nylon For drip-free spraying. ! Black polypropylene ! Double-threaded with EPDM gasket ! Opening same size as outside diameter Part No 8.705-336.0 8.705-338.0 8.705-144.0 8.705-145.0 8.705-339.0 8.705-341.0 8.705-342.0 8.705-146.0 8.705-147.0 8.705-343.0 Gaskets for Above 8.705-337.0 8.705-340.0 8.705-344.0 Old No 141232 141234 140430 140432 141236 141238 141240 140434 140436 141242 141233 141237 141243 FPT 1/2" 3/4" 3/4" 1" 1" 1-1/4" 1-1/2" 1-1/2" 2" 2" Fits 1/2", 3/4" Fits 1", 1-1/4", 1-1/2" Fits 2" Hole Dia 1-5/8" 1-5/8" 1-3/4" 1-3/4" 2-1/2" 2-1/2" 2-1/2" 3" 3" 3-1/8" Twin-Diaphragm Spot Spray Pump Brass Bulkhead / Tank Fittings ! Use to drain or remove liquids from tanks, drums, etc. ! Heavy-duty brass ! Includes nut and aluminum grip washer Part No. 8.705-139.0 8.705-140.0 8.705-141.0 9.802-149.0 9.802-150.0 Old No 140417 140419 140420 140421 140422 Overall Length Mounting Hole Dia 1/8" x 1.5" 1/4" x .94" 1/4" x 1.5" 3/8" x 1.3" 1/2" x 1.5" NOTE: Installation requires access to inside of tank. 5/8" 3/4" 3/4" 1" 1-1/8" ! 1 GPM (open) ! 35 PSI (#8 tip) ! 3/8" hose barb inlet/outlet ! Self-priming to 2.5 feet ! Operating temperature 40°-110°F ! Liquid temperature 110°F max ! 5 Amp fuse ! 1.3 lbs. dry weight ! Compact automatic on-demand operation ! Sealed pressure switch automatically stops pump when discharge valve opens and closes ! Self-priming so pump can be located above supply tank ! Can run dry for extended periods without damage ! Built-in thermal protection on 12V DC motor ! Low-Amp draw ( 2.5 @ 25 PSI, 4.0 @ 35 PSI) ! Chemical-resistant valves and diaphragm Part No. Flow 8.702-326.0 Old No 100880 Description Open Spot Spray Pump, Max 35 PSI, 12 V DC 1.0 ! 125 PSI ! 2 GPM ! 10 PSI opening pressure ! Nylon body, polypropylene end cap – EPDM – diaphragm ! 1/4" MPT inlet, 11/16" — 16 male outlet nozzle thread ! Spring-backed diaphragm for positive action Part No 8.709-377.0 Old No 310851 Description Diaphragm Check Valves ! DO NOT USE … Polypropylene for: gasoline, nitric acid, trichlorethylene, toluene, ar o mat ic hydrocarbons or ker o sene. Polypropylene “P” — black/ glass reinforced. ! DO NOT USE … Nylon for: hydrochloric acid, chlo rine, fluorine, nitric, xylene or phosphoric or sulfuric acids. Nylon 6/6 “N” white/-tural color. Page 193

AG SPRAY ACCESSORIES Plastic Fittings For cater and chemical supply lines. Ideal for use with most alkaline-based detergents, most agricultural chemicals, ethanol, and most ammonium and sodium-based compounds. ! 150 PSI ! 140°F max @ 90 PSI ! 90°F max @ 150 PSI Part No Old No Hose Barbs – Barb x MPT 8.705-262.0 8.705-264.0 8.705-263.0 8.705-265.0 8.705-268.0 8.705-270.0 8.705-277.0 8.705-280.0 8.705-278.0 8.705-281.0 8.705-284.0 8.705-282.0 8.705-285.0 8.705-288.0 8.705-283.0 8.705-286.0 8.705-289.0 8.705-287.0 8.705-290.0 8.705-291.0 90° Barb x MPT Elbows 8.705-293.0 8.705-296.0 8.705-294.0 8.705-298.0 8.705-301.0 8.705-295.0 8.705-299.0 8.705-303.0 8.705-307.0 8.705-304.0 8.705-308.0 8.705-305.0 8.705-310.0 8.705-297.0 8.705-300.0 8.705-302.0 8.705-306.0 8.705-309.0 141077P 141080P 141078P 141081P 141084P 141086P 141102N 141105N 141103N 141106N 141110N 141107N 141111N 141117N 141108N 141112N 141118N 141113N 141119N 141120N 141125P 141130P 141126P 141131P 141136P 141127P 141132P 141137P 141141P 141138P 141142P 141139P 141143P 141131N 141136N 141137N 141141N 141143N Description Poly Poly Poly Poly Poly Poly Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon Poly Poly Poly Poly Poly Poly Poly Poly Poly Poly Poly Poly Poly Nylon Nylon Nylon Nylon Nylon Barb x MPT Part No 1/4" x 1/4" 1/4" x 3/8" 3/8" x 1/4" 3/8" x 3/8" 1/2" x 3/8" 5/8" x 1/2" 1/4" x 1/4" 1/4" x 3/8" 3/8" x 1/4" 3/8" x 3/8" 3/8" x 1/2" 1/2" x 3/8" 1/2" x 1/2" 1/2" x 3/4" 5/8" x 3/8" 5/8" x 1/2" 5/8" x 3/4" 3/4" x 1/2" 3/4" x 3/4" 1" x 3/4" 1/4" x 1/4" 1/4" x 3/8" 3/8" x 1/4" 3/8" x 3/8" 3/8" x 1/2" 1/2" x 1/4" 1/2" x 3/8" 1/2" x 1/2" 1/2" x 3/4" 5/8" x 1/2" 5/8" x 3/4" 3/4" x 1/2" 3/4" x 3/4" 3/8" x 3/8" 3/8" x 1/2" 1/2" x 1/2" 1/2" x 3/4" 3/4" x 3/4" 8.705-317.0 8.705-323.0 8.705-319.0 8.705-326.0 8.705-321.0 8.705-324.0 8.705-322.0 8.705-318.0 8.705-320.0 Old No HEX Nipple – MPT x MPT 8.705-316.0 141184P 141185P 141190P 141186P 141193P 141187P 141191N 141190N 141186N 141187N Elbows – Barb x Barb 8.705-335.0 141216P Tees Barb x Barb x Barb 8.705-329.0 8.705-332.0 8.705-327.0 8.705-328.0 8.705-334.0 141207P 141215P 141202N 141205N 141216N 141305N Description Poly Poly Poly Poly Poly Poly Nylon Nylon Nylon Nylon Poly Poly Poly Nylon Nylon Nylon Nylon Barb x MPT 1/4" x 1/4" 3/8" x 3/8" 1/2" x 3/8" 1/2" x 1/2" 3/4" x 1/2" 3/4" x 3/4" 1/2" x 1/4" 1/2" x 3/8" 1/2" x 1/2" 3/4" x 3/4" 3/8" x 3/8" 1/2" BxBxB 3/4" BxBxB 1/4" BxBxB 3/8" BxBxB 3/4" BxBxB “Push-On” Hose Barbs – (Normally does not require clamps) 8.705-346.0 1/4"Bx1/4"FPT Page 194

CARPET & RESTORATION Sprayers & Parts Professional Stainless-Steel Sprayer ! Stainless-steel tank ! Brass wand ! Brass cap ! Brass handle ! Precise spray patterns (both straight stream and fan spray) from an all-brass tip ! Famous non-drip nozzle that professionals demand Sprayer – Chemical-Resistant Large funnel top, poly-molded, chemical-resistant. ! Heavy-duty polyethylene tank !Wide base for extra stability ! Durable brass valve and extension ! Chemical-resistant seals ! Reinforced chemical-resistant hose ! Celcon fan spray tip ! Brass spray gun Part No 8.697-165.0 8.697-168.0 8.697-171.0 Part No 8.697-373.0 Description Pro Stainless-Steel Sprayer Poly-Molded Sprayer Stainless-Steel Industrial Sprayer 2-gallon industrial sprayer. Plastic valve and brass extensions, fan-spray tip. ! Heavy-duty stainless-steel tank ! Plastic valve with brass extension ! Chemical-resistant seals ! Available in 2- and 3-gallon capacities ! Plastic pin-to-cone spray tip ! Funnel top design Part No 8.697-170.0 Description Stainless-Steel Industrial Sprayer Stainless-Steel Sprayer 2-gallon sprayer with plastic valve and extension. Adjustable pin-to-cone tip. ! Heavy-duty stainless-steel tank ! Chemical-resistant hose ! Plastic valve and extension ! Buna-N seals and gaskets ! Pin-to-cone adjustable spray tip ! 2-gallon capacity ! Economically priced but durable Part No 8.697-169.0 Description Stainless-Steel Sprayer Foam Nozzle Attachment Foaming nozzle attachment fits: Stainless and hand-held sprayers. 3-gallon poly-molded sprayer with maximum chemical resistance. ! Heavy-duty design, economical price ! Blue poly-molded tank ! Funnel top design for ease-of-filling ! Durable plastic valve and extension ! Pin-to-cone spray tipFully repairable ! Braided, reinforced hose ! Optional flat-fan spray tips available ! Buna gaskets and seals Part No 8.697-172.0 Description Poly-Molded Sprayer Description Sprayer Chemical Resistant – 1 gallon Sprayer Chemical Resistant – 2 gallon Sprayer Chemical Resistant – 3 gallon Part No 8.697-164.0 Description Foam Nozzle Attachment Sprayermaster – Standard 7-quart standard Spraymaster. Sprayermaster – High-Pressure 5-quart high-pressure Spraymaster. ! 4-1 or 9-1 dilution ratio Part No 8.697-413.0 Description Sprayermaster High-Pressure Page 195 ! 9-1 complete ! Includes swivel quick disconnects ! T-jet / check valve Part No 8.697-412.0 Description Spraymaster Standard

CARPET & RESTORATION Tile & Hard Surface Tools Hard-Surface Spinner Tool Professional-grade, hard-surface spinner tool. ! All stainless-steel construction ! Vacuum hose inlet fits either 1.5" or 2" hose ! Angled nozzles, splashguard, high-pressure double-bearing and ceramic-seal assembly ensures professional results. Part No 8.697-376.0 Description Hard-Surface Spinner Tool Van Accessories Solution Hose Live Swivel Assembly Turns your solution reel live for direct hookup. ! High-pressure ! 1/4" hose Part No 8.697-344.0 Description Solution Hose Live Swivel Assbly The Blaze-XL128 flashlight offers an amazing 128 individual LEDs which makes it the largest LED flashlight on the market. Unlike the higher wave length 400 nM versions that come with a strong visible purple light and a hefty price tag, this one puts out less visible light making inspections more accurate and easier. All of this packed in a lightweight aluminum body weighing just 22 ounces. ! Bulb type: 390 to 395 (nM) ! Bulb life: 100,000 hours ! Head diameter: 3.375" or 55 mm ! Body diameter: 1.5" or 38 mm ! Length: 12" or 254 mm ! Body material: Aluminum with “O” rings for water resistance ! Battery require: 3 x D size alkaline battery (not included) ! Battery life: Approximately 40 hours on three D-size batteries ! Switch type: Click on/Click off !Weight: 1.5 LB (without batteries) Part No 8.697-331.0 Restoration Equipment & Accessories Waterproof ExStik pH Meter ! 1-, 2- or 3-point calibration automatically recognizes buffer solutions ! Automatic temperature compensation simultaneous display of pH qand temperature ! Display indicates when the reading is stabilized ! Data Hold, Auto Power-Off and low-battery indication !Waterproof design floats in water and protects the meter in wet environment ! Interchangeable probes available for Chlorine and ORP ! Optional weighted base holds Head diameter: 3.375" or 55 mm ! Body diameter: 1.5" or 38 mm ! Length: 12" or 254 mm plastic cup and ExStik Part No 8.697-330.0 Description Waterproof ExStik pH meter ® meter Sonin 4-in-1 Multifunction Detector 4-1-1 stud, moisture, metal, and voltage detector. ! Detects moisture percentages 8%-22% ! Helps find if potentially damaging excess moisture is present ! Locate and trace water leaks to prevent wet rot ! Detects wood and metal studs, beams and joists behind walls up to 3/4" deep ! Non-contact voltage detection helps you trace and locate live AC wire behind walls, ceilings, up to 2" deep ! Detects -ils in wood up to 2" deep ! Detect and locate hidden metal, steel and copper pipes, and frames (both ferrous and nonferrous) behind walls up to 2" deep Part No 8.697-029.0 Page 196 Description Sonin 4-in-1 Multifunction Detector ! Fast, accurate and easy-to-read LED display with audible indictor ! Microprocessor-based instrument with automatic calibration to ensure accuracy ! Low-battery warning ! Requires one 9V battery (not included) ! One-year warranty Description UV Flashlight 128 LED Blaze Sonin Digital Moisture Meter ! Measures moisture levels from 5 to 40%, resolution 1% ! Easy-to-read, large LCD display with low-battery symbol ! Date-hold function ! Replacement probe included ! Protective carrying pouch included Part No 8.750-460.0 Description Sonin Digital Moisture Meter UV Flashlight Blaze 128 LED 128 Individual LED UV Flashlight.

CARPET & RESTORATION Extech pH Meter Buffer Solution Calibrating buffer solution. Sonin Multi-Measure 45 Easy-to-use tapeless distance-measuring tool. Get the entire square footage of a house in only minutes. Part No 8.697-395.0 8.697-397.0 8.697-396.0 Description Buffer Solution – pH 10 Buffer Solution – pH 7 Buffer Solution – pH 4 Sonin Laser Targeting Range Finder Take the guesswork out of ultrasonic-distance measuring by pinpointing the approximate center of your target area. ! Adds linear measurements, area, volumes ! Measures in Ft/In, M/Cm, Decimal Ft. and Yds. ! Tracking and validate modes ! Can measure from top or bottom of unit ! Seven memories with easy recall ! Automatic internal temperature compensation ! Auto shut-off seven minutes after last use ! Multi-lingual detailed instruction booklet ! Low-battery warning ! Requires one 9V battery (not included) ! Accuracy 99.5% +/- 1/4" (1cm) ! Protective pouch with belt loop ! Recommended for indoor-use only ! One-year warranty Part No 8.697-036.0 Description Sonin Laser Targeting Range Finder ! Measures from 1'10" up to 45 feet (13 meters) ! Displays measurements to the ¼" ! Computes areas and volumes ! Adds linear measurements, area, volumes ! Measures in Ft/In, M/Cm ! Tracking and Validate modes ! Automatic internal temperature compensation ! Auto shut-off seven minutes after last use ! Multi-lingual detailed instruction booklet ! Multi-lingual quick-reference instruction label ! Low-battery warning ! Requires one 9V battery (not included) ! Accuracy 99.5% +/- 1/4" (1cm) ! Recommended for indoor-use only ! One-year warranty Part No 8.697-037.0 Description Sonin Multi-Measure 45 Ozone Generator Villa 1000 Eliminate odors naturally. The odor-free purifier will oxidize unwanted odors in your facility. It generates O3, or ozone, which disburses into the space to be treated. The O3 attacks odors at their source and sanitizes the entire treatment area. It is especially effective on: Sonin Moisture Test Meter Dual-reading scale gives relative (1-10) and moisture percentages 10-28% readings. ! Instruction sheet included ! One-year warranty ! Helps you to select drier lumber ! Contact probes are on a 3'-coiled cable for detecting moisture in hard to reach spots ! The 10-point scale corresponds to moisture levels from 10-28% ! Scale and reference chart correlate relative and moisture percentage readings ! Great for inspectors, contactors and homeowners ! Test hard or soft wood, concrete, plaster, carpet and more to detemine the extent of moisture problems ! Find out if potentially damaging excess moisture is present ! Locate and trace roof leaks and water seepage; assess the extent of wet rot and hidden condensation ! Use it to check surfaces before painting, wallpapering or laying floors or tile ! Requires one 9V battery (not included) Part No 8.697-031.0 Description Sonin Moisture Test Meter Page 197 ! 31" long ! Reads moisture content of 17% ! For use in urine detection and moisture mapping Part No 8.697-417.0 Description Moisture Sensor, Hydro Shark ! Cigarette smoke ! Mold and mildew ! Smoke damage ! Food odors ! Pet odors ! Carpet odors Part No 8.697-128.0 Description Ozone Generator Villa 1000 !Water damage ! Cleaning fumes ! Beverage odors ! Decaying matter ! New construction ! Microorganisms Moisture Sensor, Hydro Shark

CARPET & RESTORATION Carbon, Vapor Lock Filter Third-stage, vapor-lock carbon filter. ! Third-stage, 2" high-capacity, carbon, vapor-lock filter ! The third-stage filter has woven carbon media for absorption of gases and odors ! It is recommended you change the third-stage filter every six to 12 months under normal operating conditions Part No 8.697-390.0 Description Carbon, Vapor Lock Filter ! High-density polyethylene cabinet is strong and durable; resin includes microbial growth and UV inhibitors ! Powerful — provides more airflow per pound than other products Second-Stage Particulate Filter 2" second-stage, pleated particulate filter. ! Second-stage, pleated particulate filter ! Removes more finer particulates than the first-stage filter ! It is recommended you change the second-stage filter every six to nine months under normal operating conditions Part No 8.697-389.0 Description Carbon, Vapor Lock Filter Predator 600 Portable Air Scrubber Fiber Trapper Pre-Filter Particulate pre-filter for air filtration units used for commercial, industrial, residential, and healthcare applications. The FiberTrap pre-filter is designed to capture the coarsest particles circulating through your air duct system which helps to extend the life of the second-stage carbon-pleated filter and the HEPA filter, saving you money! Part No 8.697-386.0 Description Fiber Trapper Pre-Filter The world’s lightest and smallest PAS with the performance and features you need. ! Lightweight (70 lbs) and portable, superior mobility for vehicle loading / unloading and easyrolling to the job site ! Low-amperage draw, safely ‘daisy-chain’ up to three units on one 115V / 15-Amp circuit ! True 99.97% HEPA filtration, Type A HEPA tested and certified to IEST construction and testing standards; microglass media does not rely on an electrostatic charge to maintain efficiency; two pre-filter stages; optional third stage ! Economical to operate Part No 8.697-384.0 Description Predator 1200 Portable Air Scrubber Predator 1200 Portable Air Scrubber The new, state-of-the-art rotational-molded HEPA filtration systems. ! INCREDIBLY LIGHTWEIGHT AND COMPACT – Weighs just 34 lbs. including filters — about 10 pounds lighter than any other PAS ! POWERFUL – Variable-speed airflow, rated at 200 to 600 cfm.PRED 600 is the smallest 600 cfm unit on the market ! SPECIAL CABINET RESIN – Cabinets made from a high-density polyethylene resin that cotains microbial growth and UV inhibitors. And, the Tefgard™ finish is easy to clean and decontaminate ! EFFECTIVE FILTRATION – Comes with two pre-filters and a true 99.97% HEPA filter. Vapor-Lock® carbon pre-filter is optional HEPA Filter PRED 1200 Fi-l-stage, round High-Efficiency Particulate Arresting (HEPA) filter. ! Fi-l-stage, round replacement HEPA filter ! HEPA filters capture 99.97% of airborne contami-nts as small as 0.3 microns in size ! The H610C-99 removes bacteria, mold spores, soot, pollens, animal hair, animal dander, dust mites, smoke particles and other allergens and lung damaging particles ! It is recommended you change the final filter every two to three years under normal operating conditions Part No 8.697-383.0 Description HEPA Filter PRED 1200 ! ECONOMICAL TO OPERATE – Filters last longer and cost less — you can save hundreds of dollars in replacement filter costs ! SECURE STACKING – Multiple units nest securely together to save space when stacked in a warehouse, a van, or on the job.They can even run when stacked ! LOW-AMPERAGE DRAW, – Up to five units can be safely daisy-chained on one 15-Amp circuit (total current draw 12 Amps). Part No 8.697-385.0 Description Predator 600 Portable Air Scrubber Page 198

CARPET & RESTORATION ZipWall 12' Poles – 2/pk Two spring-loaded poles, extends from 4'-7" to 12', includes two sets of parts (head, plate, tether, GripDisk™). ZipWall Zipper Includes two self-adhesive zippers and two cords for tying up a plastic flap. For indoor-use only. ! Makes an easy doorway through plastic barriers ! Designed by the manufacturers of the award-winning ZipWall® dust barrier systems ! Has the smoothest glide available ! Is engineered with large, sturdy easy-slide teeth ! The six SLP™ poles extend from 4'-9" to 12' ! The poles can be placed 8 to 10 feet apart. If there is any significant air movement that pushes the plastic, you will want to pull them in closer together ! The GripDisk™ slide stoppers should always be used, especially on hard surfaces ! Six GripDisk™ slide stoppers come in every package Part No 8.697-368.0 Description ZipWall 12' Poles 2/pk Pressurized Drying System-21 ZipWall Carrier Bag Sturdy, durable. Can hold 12 SLPs or six 20' poles with jacks unattached. ! Made of tough polyester ! Keeps all your barrier products organized and easy to transport ! Holds the 20 foot pole and the red jack u-ttached Part No 8.697-366.0 Description ZipWall Carrier Bag Part No 8.697-129.0 ZipWall Side Clamp – 2/pk Two side-clamp wall mounts. ! Each side-clamp wall mount is made of polycarbonate and is very tough ! This product can easily fit into the ZiWall® carry bag with poles and Foam Rail™ cross bars ! In some situations where you have large crown moldings and base board heat on the same wall, the pole may be too far from the wall for the sideclamp wall mounts to reach Part No 8.697-365.0 Description ZipWall Side Clamp 2/pk Description Pressurized Drying System-21 Viking’s new patent-pending pressurized drying system makes drying wall cavities easier and less frustrating than before. Perfect for under sinks, behind cabinets and permanent furniture. Its portability makes drying a breeze. All-in-one containment provides the operator with simple on-the-go equipment. Just bore a 1/2" hole, plug in the end hose and begin drying. An on-board plug-off system makes plugging unused tubes simple. ! Is made with two-sided pulls for easy entry / exit to or from the barrier !Works best in temperatures above 55°F Part No 8.697-363.0 Description ZipWall Zipper Legacy Air Mover (LAM3) Powerful up to 3000 CFM, lightweight, versatile three-speed air mover reduces carpet drying times by up to 50%. ! Durable polyethylene gray housing with a sturdy four-point motor mount ! Easy to carry and move. Lightweight with a balanced offset handle ! 120V AC, 60hz, 9 Amp, with molded cord hooks for storing the 25' 16/3 ! 1/2 HP thermally protected continuous duty motor with capacitor start and four-point mount ! Built-in carpet clip makes it easy to dry floors under carpet — ideal for restoration work Duckbill Snipping Shears Unique duckbill blade designed for precision cuts. 7" ! Offset handle for easy-level nap trimming. Part No 8.697-060.0 Description Duckbill Napping Shears (7") Part No 1.004-014.0 Description Legacy Air Mover Page 199

CARPET & RESTORATION Air King Pivoting High-Velocity The Pivoting Blowers are a perfect fit for any job site. The compact size makes them a great fit where space is tight. ! The Pivoting High-Velocity Blower features a pivoting head to direct air flow where you need ! With a type SO, GFCI power cord with test and reset buttons ! The 1/13 HP blower delivers just the amount of air flow you need ! Dimensions: 13"L x 11"W x 14.5" Weight: 12.75 lbs. Part No 8.697-205.0 Description Air King Pivoting High-Velocity EZ Moves Hard Surface Pro For heavy moving on hard floors (4/pkg). Carpet Installation & Repair Carpet Shears Bent Handle Shears made for the most demanding of jobs. ! Entirely made in the U.S.A. ! Shears are hot-hammer-forged of high-integrity cutlery steel ! Hardened and tempered for durability and long life ! Shears are plated for superior protection against rust and corrosion Part No 8.697-016.0 8.697-017.0 Description Carpet Shears Bent Handle (10") Carpet Shears Bent Handle (8") Aviation Snips for Most Metals A high-quality, imported 10" snips with alloy steel handles. ! Alloy steel handles ! Hot-forged molybdenum steel blades ! Makes straight cuts 1-1/2" long in metal up to 18 gauge (.049") thick ! Vinyl grips for comfort Part No 8.697-068.0 Description Aviation Snips Hoses, Connectors and Accessories Carpet Repair Replacement Blades ! Replacement blades for the Cookie Cutter Repair Tool ! 10 per pack Ball Shut-Off Valve 1/4" Replacement Econo shut-off valve. ! Use this ball valve on your solution hose ! Fits 1/4" fittings Part No 8.697-340.0 Description Carpet Repair Replacement Blades Page 200 Part No 8.697-347.0 Description Ball Shut-Off Valve 1/4" Perfect Patch Easiest way to repair carpet. ! The 3-in-1 Perfect Patch tool is the easiest way to repair carpet and it comes with a FREE how-to-patch a carpet video! Part No 8.697-392.0 Description White Chalk ! Unconditional lifetime warranty against defective materials or workmanship ! A fully-warranted factory reconditioning is available for a charge for the life of the shears ! An accessory for your EZ Moves II™ to provide extra protection when moving items across hard surfaces 5-3/4" x 9-1/2" Part No 8.697-026.0 Description EZ Moves Hard Surface Pro Part No 8.697-027.0 Description EZ Moves Pro EZ Moves Pro Set of four ! Used by moving men, carpet installers, carpet cleaners, painters, remodelers, store owners, janitorial services, interior designers and more 11.5" x 6.75" Instant Hold Replacement Disks Replacement disks for the cookie-cutter repair tool. ! A must-have for the carpet repair professional ! 100 disks per pack Part No 8.697-343.0 Description Instant Hold Replacement Disks

CARPET & RESTORATION Premium Ball Shut-Off Valve Replacement shut-off ball valve. ! Premium quality built into this shut-off valve Part No 8.697-125.0 Description Premium Ball Shut-Off Valve (1/4") Chrome Ball Valve ! 1000 PSI ! 300° M/F ! “T”-handle valve Part No 8.697-414.0 Description Chrome Ball Valve – 1/4" Connector: Barb Hose 2"-2" 2" barb x 2" barb connector. Connector 1.5"-2" Stainless-Steel Durable stainless-steel vacuum hose connector. ! Connects 2" vacuum hose cuff to 1.5" hose cuff Part No 8.697-076.0 Description Connector 1.5"-2" Stainless-Steel Coupler: 1/4" Female, Secure Lock Part No Description 8.697-346.0 Connector: Barb Hose 2"-2" Connector: Barb Hose 1.5"-1.5" 1.5" barb x 1.5" barb connector. Part No Description 8.697-345.0 Connector: Barb Hose 1.5"-1.5" Connector: Barb Hose 2"-1.5" 1.5" barb x 2" barb. Part No 8.697-348.0 Description Connector: Barb Hose 2"-1.5" Connector 1.5" Stainless-Steel Part No Durable stainless-steel vacuum hose connectors for connecting two lenths of 1.5" vacuum hose. ! Connects two sections of 1.5" vacuum hose Part No 8.697-075.0 Description Connector 1.5" Stainless-Steel Part No Connector 2" Stainless-Steel Durable stainless-steel vacuum hose connectors for connecting two lenths of 2" vacuum hose. Part No 8.697-078.0 Description Connector 2" Stainless-Steel 8.697-079.0 Description Coupler: 1/4" Female 8.697-085.0 Description Coupler: 1/4" Female, Secure Lock Coupler: 1/4" Female Parker quick-connect. Coupler: 1/4" Female Stainless-Steel Durable stainless-steel female replacement coupler. Connector 2" Stainless-Steel ‘Y’ Vac Vacuum hose “Y” — 2" stainless-steel hose connector. ! Use two wands on a single-wand machine ! Durable stainless-steel for long wear Part No 8.697-123.0 Description Connector 2" Stainless-Steel ‘Y’ Vac Page 201 Part No 8.697-087.0 Description Coupler: 1/4" Female Stainless-Steel

CARPET & RESTORATION Coupler: Quick Connect 1/4" F Econo Female 1/4" econo replacement QD. ! Interchangeable with other manufacturers’ fittings Part No 8.697-350.0 Description Coupler: Quick Connect 1/4" F Econo Hose Cuff 1.5"-2" Small End Threaded Vinyl enlarger. ! 1-1/2" vinyl screw cuff enlarged to accommodate ! 2" O.D. wand connection Part No 8.697-091.0 Description Hose Cuff 1.5"-2" Small End Threaded Coupler: 1/4" Male Quick-Connect Econo Coupler 1/4" male quick-connect, economy. ! Directly interchangeable with your worn out brass or stainless-steel couplers Part No 8.697-080.0 Description Coupler: Quick-Connect 1/4" M Econo Coupler: 1/4" Male Stainless-Steel Parker Hannifin coupler 1/4" male quick-connect. Part No 8.697-086.0 Description Coupler: 1/4" Male Stainless-Steel Hose Cuff 2"-1.5" Both Ends Threaded 2"-1.5" vinyl double threaded connector. Part No 8.697-095.0 Description Hose Cuff 2"-1.5" BET Hose Cuff 2" Swivel Reducer 2" vinyl swivel reducer cuff. Part No 8.697-093.0 Description Hose Cuff 2" Swivel Reducer Misc. Hose Cuffs and Accessories Part No Description Coupler: 1/4" Male Quick Connect PH High-quality, long-life Parker Hannifin brand coupler. Part No 8.697-081.0 Description Coupler: 1/4" Male QC PH 8.708-896.0 8.708-900.0 8.708-898.0 Hose Connector 1.5"-1.5" Hose Cuff 2" Threaded Reducer Hose Cuff 2"-2" Both Ends Threaded Hose Hook 1.5 Hose Hook 1.5" to 3". ! Hook: 1/4" dia., 1-1/4" radius bend (2-1/2" opening) Hide-A-Hose Swivel Cuff Vinyl hide-a-hose swivel cuff. ! Now you can hide your solution hose within the vacuum hose line, and you can forget the hassles of trying to work with separate hoses lying all around! Part No 8.697-351.0 8.697-349.0 Description Hide-A-Hose Swivel Cuff (2" ) Hide-A-Hose Swivel Cuff (1.5") ! Can hook on larger objects Part No 8.697-100.0 Description Hose Hook 1.5 ! Coated to prevent scratches ! Fits 1-1/2" to over 3" hoses Hose Hugger 3 x 27 3 x 27" for 25' + of 1-1/2" vacuum hoses. Part No 8.697-122.0 Swivel Cuff: Big End Threaded Part No 8.708-903.0 8.708-904.0 8.708-905.0 8.708-906.0 Description Big End Threaded (1.5") Big End Threaded (2") Swivel Cuff (1.5") Swivel Cuff (2") Page 202 Hose Hugger 3 x 34 3 x 34" for larger diameter vacuum hoses. Part No 8.697-121.0 Description Hose Hugger 3 x 34 Description Hose Hugger 3 x 27

CARPET & RESTORATION Cord Hugger 3 x 12 For light-duty electric cords up to 100'. ! Clear the clutter and tangles with this handy accessory. ! Tandem hose clamp 2" wide strap ! Adjustable Part No 8.697-120.0 Description Cord Hugger 3 x 12 Part No 8.697-101.0 D-Ring Handi Tie 1.5 An all-purpose tie for power cords and solution hoses. Keeps them with the tool or appliance. Part No 8.697-099.0 Description D-Ring Handi Tie 1.5 Description Tandem Hose Clamp Tandem Hose Clamp For keeping hoses connected. Solution Hose Reel Solution reels provide convenient storage for high-pressure solution hose and garden hose. !Will accommodate up to 150' of 5/8" garden hose or 450' for 1/4" high-pressure hose ! Standard solution reels come in two sizes and come equipped with an angle bracket that bolts directly on to our vacuum hose reels QD Connector Sleeve Set To protect you and your customers. ! Covers the hot metal ends of your hose to prevent burns and damage to you and your customer ! Helps to protect brass fittings for longer life Part No 8.697-077.0 Description QD Connector Sleeve Set Solution Hose 50', 1/4" 3000 PSI High-temperature, high-pressure solution hose. Snap N Lock Cuff Snap N Lock hose connector set. ! Stainless-steel button locks ! Positive locked connection ! High-impact, safety-yellow plastic Part No 8.697-408.0 8.697-410.0 8.697-407.0 Description S-p N Lock Cuff (1.5"-1.5") S-p N Lock Cuff (2"-1.5") S-p N Lock Cuff (2"-2") ! Durable in hot or cold climates ! Fracture-resistant ! 50 feet, steel-braided ! Handles up to 250°F and 3,000 PSI ! Tight-bend radius capability ! 1/4" male swage fittings and a black poly heat shield Part No 8.918-062.0 Description Solution Hose – Blue ! All welded-steel construction with rust-resistant paint finish make it an attractive asset to any truck-mounted cleaning system Part No 8.697-071.0 8.697-070.0 Description Solution Hose Reel (150'/ 5/8", 450'/ 1/4") Solution Hose Reel (100'/ 5/8", 300'/ 1/4") Solution Hose 50', 1/4" 1500 PSI High-temperature, high-pressure solution hose. Snap N Lock Cuff 2" Snap N Lock 2" leaf trap adapter. ! Stainless-steel button locks ! Positive locked connection ! High-impact, safety-yellow plastic Part No 8.697-409.0 Description Snap N Lock Cuff 2" ! Durable in hot or cold climates ! Fracture resistant ! 50 feet, gray, steel-braided ! Handles up to 250°F and 1,500 PSI ! Tight-bend radius capability ! 1/4" male swage fittings and a black poly heat shield Part No 8.918-074.0 8.918-063.0 Description Solution Hose – Blue Solution Hose – Gray Page 203

CARPET & RESTORATION Solution Hose 50', 3/8" Blue, 3000 PSI High-temperature, high-pressure solution hose. !50 feet of 3/8" Goodyear high-pressure solution line, steel-braided !For pressure washing or other equipment that requires more water flow !3000 PSI / 250°F !Plastic heat sleeve Part No 8.739-148.0 Description Solution Hose – Blue Vacuum Hose Reel These storage reels offer the advantage of using a reel as an effective piece of operating equipment rather than a simple device for the storage of hose. ! All storage reels feature custom-fabricated UHMW bearings. UHMW is a plastic compound that will provide trouble-free service ! All reels are pre-drilled to accept our solution reels which are simply bolted on ! All reels are equipped with a positive spool stop ! All reels are welded-steel construction and finished with rust-resistant paint Part No Truck-Mount Hose, Heavy-Duty Gray Hose, 25' or 50' heavy-duty, truck-mount vacuum hose, gray with cuffs. ! The Combination of co-polymer materials and two-part helically-wound construction make this hose superior to others in the market ! Pro-Flex™ has all the characteristics users look for in a vacuum hose plus many added features such as ultraviolet protection, crush-resistance, smooth bore and much more. Part No 8.697-114.0 8.697-118.0 Description Truck-Mount Vacuum Hose (50', 1.5") Truck-Mount Vacuum Hose (50', 2") Truck-Mount Hose, Heavy-Duty Blue Hose, 25' or 50' heavy-duty, truck-mount vacuum hose, blue with cuffs. ! The combination of co-polymer materials and two-part helically-wound construction make this hose superior to others in the market ! Pro-Flex™ has all the characteristics users look for in a vacuum hose plus many added features such as ultraviolet protection, crush resistance, smooth bore and much more Part No 8.697-112.0 8.697-117.0 Description Truck-Mount Vacuum Hose (50', 1.5") Truck-Mount Vacuum Hose (50', 2") Faucet Kit Adapter ! Universal faucet adapter Part No Description 8.697-406.0 Faucet Kit Adapter 8.697-072.0 8.697-073.0 8.697-074.0 Description Vacuum Hose Reel – 200' Vacuum Hose Reel – 250' Vacuum Hose Reel – 300' Vinyl-Coated Wand Hook ! 2-1/2" wand / utility hook for chemical shelves ! Vinyl-coated to avoid scratching and rust Part No 8.697-103.0 Description Vinyl-Coated Wand Hook Double Hose Reel Stand Self-supporting, dual hose reel stand. ! Dual stand ! Self-supporting ! Provides more hose capacity than the single stand ! Also permits independent live operation of the reels Part No Vacuum Hose Shelf Hook 4.5" vacuum hose shelf hook. ! For straight-sided shelves 4-1/4", plated to prevent rust Part No 8.697-102.0 Description Vacuum Hose Shelf Hook ! Single stand ! Self-supporting ! Can be used to make reel portable or to simplify installation ! Also accommodates live operation of the reel Part No 8.697-420.0 Page 204 Description Hose Reel Stand 8.697-419.0 Description Double Hose Reel Stand Hose Reel Stand Self-supporting, hose reel stand.

CARPET & RESTORATION Stack Bracket Stack bracket for solution hose. ! Mounts to either side of vacuum storage reel ! Stack bracket will not add to the overall dimensions of the vac reel ! Allow space-saving convenience of double stacking two solution reels on same side of the vacuum reel Part No 8.697-421.0 Description Stack Bracket Groomers Grandi Brush Designed to give maximum penetration on commercial-grade level and multi-loop carpets. ! The Grandi Brush features a single row of nylon fibers that have been designed to give maximum penetration on commercial-grade level and multi-loop carpets Swivel Assembly Convert standard solution reel to live storage.. ! 3/8" swivel ! 3/8" hose ! Fittings to attach hose Part No 8.697-423.0 Description Swivel Assembly ! You can agitate pre-sprays as well as protectors to get optimum performance from your carpet cleaning chemicals Part No 8.697-009.0 Description Grandi Brush Grandi Brush (Head Only) No Handle. Part No Description 8.697-011.0 Brushes Swivel Grout Brush Swivel grout brush 1" X 8". ! The fibers on this brush are trimmed to a chisel edge to allow the brush to scrub aggresively along grout lines ! The stiff black fiber will stand up to tough use ! Uses standard-threaded handle (not included) Part No 8.697-287.0 Description Swivel Grout Brush Nap Brush Nylon, white, stiff -pping brush. ! Used to remove swirl marks from the rotary action of machines, foot prints, or even wheel tracks from equipment ! Shade the nap in one direction to give the carpet a neat, finished appearance ! Featherweight brush is 19" wide with three rows of 1-1/2" long nylon bristles ! Designed to not streak ! Nap brush is very strong, yet lightweight, which eliminates job fatigue and helps the job go faster Part No 8.697-320.0 Description -p Brush Grandi Groom (Head Only) No handle. Part No 8.697-019.0 Description Grandi Groom (Head only) Grandi Groom Perfect for multi-level carpet pile. ! 18" wide head ! Ideal for agitating pre-spray into the carpet ! Excellent for working protector into the carpet Part No 8.697-012.0 Description Grandi Groom Grandi Brush (Head only) Handi Brush This short soft bristle brush is excellent for upholstery, velvet, oriental rugs or any other fine fabric. ! Use before cleaning to lift nap and remove lint,pet hair or other debris ! Use after cleaning to lift nap Part No 8.697-014.0 Description Handi Brush Page 205

CARPET & RESTORATION Grandi Groom Conversion Convert your Grandi Groom to include the Grandi Brush head. Spotting Bottle Plastic spotting bottle with lid. ! Sprayer bottles and sprayers are perfect for chemicals and cleaners. ! The Grandi-Groom Conversion Kit consists of the Grandi Brush head with dual-head connector to attach to your existing Grandi Groom to create a two-headed grooming tool ! The Grandi Brush features a single row of nylon fibers that have been designed specifically to give maximum penetration on commercial grade level and multi-loop carpets ! You can agitate pre-sprays as well as protectors to get optimum performance from your carpet cleaning chemicals ! The Grandi Brush can be combined with the classic Grandi Groom to create the Grandi / Brush Combo ! With the conversion kit, you can create a two-headed grooming tool that adapts easily to any type of carpet Part No 8.697-013.0 Description Grandi Groom Conversion Part No 8.697-006.0 8.697-035.0 8.697-007.0 Description Spotting Bottle – 32 oz Spotting Bottle –16 oz Spotting Bottle – 4 oz Misc. Accessories Wall Buddy The ultimate solution in corner protection. ! Can be used in the carpet cleaning-, janitorial- and painting-industries Handi Groom Brush Plastic bristles agitate pre-spray and protectants on stairs and hard-to-reach areas. Ideal for use in spot dyeing. ! Lightweight plastic bristle hand brush designed as a pile conditioner for carpeting on stairs and in tight places ! Excellent for restoring the appearance and texture of high-pile area rugs, fringes, even sweaters ! Compact and handy, but strong enough for stubborn dirt Part No 8.697-015.0 Description Handi Groom Brush Drum Pump Siphon drum pump. Containers Measuring Cups End the guessing game. ! Cups are calibrated for exact measurements Part No Description 8.697-021.0 8.697-024.0 8.697-023.0 Measuring Cups – 16 oz Measuring Cups – 8 oz Measuring Cups – 4 oz ! Made from polyethylene ! Fits 15-, 30- and 55-gallon drum with 2" National pipe thread Part No 8.704-696.0 Description Drum Pump ! Protects all of the corners of the walls and furniture on your job ! Portrays a professional image which reassures your customer that you care ! Protects against costly insurance claims due to damaged corners or walls ! Made from a lightweight, non-marking durable plastic ! Can be sold to customers who have central vacuum systems Part No 8.697-425.0 Description EZ Fill Container Styrofoam Blocks – White White styrofoam, 2.0 PSI. 1,008 per case! Measuring Cups – 2 oz Part No Description 8.697-022.0 Measuring Cup – 2 oz Page 206 Part No 8.697-003.0 Description Styrofoam Blocks – White

CARPET & RESTORATION Styrofoam Blocks – Blue Premium blue styrofoam blocks. The best block money can buy! ! Blue blocks are the very best, especially for the heaviest furniture ! These 2" x 2" x 1" blocks have the highest compressive strength available and will never crush !Will never leave a mess as it always s-ps off cleanly ! 1,008 per case Part No 8.697-001.0 Description Styrofoam Blocks – Blue Knee Pads Save your knees — buy these. Plastic Protector Pads – 1000/cs Furniture protection solution. ! The solution for protecting furniture legs from moist carpet ! Each box contains two blocks of 425 and one block of 150 ! Clear plastic, completely moisture-proof Part No 8.697-028.0 8.697-030.0 Description Plastic Protector Pads 1000/cs – 3 x 3 Plastic Protector Pads 1000/cs – 4 x 4 Safety Items Boot Hazmat / Flood Yellow hazmat / flood boots. ! Great foot protection against muddy and watery conditions in many different types of environments and workplaces Part No 8.697-131.0 8.697-132.0 Description Boot Hazmat / Flood – XL Boot Hazmat / Flood – XXL ! Latex-free ! Ambidextrous ! Lightly powdered ! Rolled cuff ! 100 per box ! Meets FFDCA requirements for safe food handling Part No 8.697-137.0 8.697-148.0 8.697-138.0 Description Vinyl Disposable Gloves – Large Vinyl Disposable Gloves – Medium Vinyl Disposable Gloves – XL Nitrile Flock-Lined Gloves Strong, chemical-resistant nitrile gloves. Price per dozen. ! Green 15 mil ! 12" nitrile flock lining ! Strong, chemical-resistant, including petroleum-based products Disposable Nitrile Gloves Powdered, nitrile disposable gloves. ! Powdered, nitrile, rolled cuff ! Meets FFDCA requirements for food contact ! Ambidextrous ! Greater tactile feel over other latex alter-tives ! 100 per box Part No 8.697-145.0 8.697-146.0 8.697-147.0 Description Disposable Nitrile Gloves – Large Disposable Nitrile Gloves – Medium Disposable Nitrile Gloves – XL ! Meets FFDCA requirements for food contact Part No 8.697-143.0 8.697-144.0 Description Nitrile Flock Lined Gloves – Meduim Nitrile Flock Lined Gloves – XL Vinyl Disposable Gloves Seamless, vinyl, latex-free disposable gloves. ! One size fits all ! Quality construction with comfort in mind ! Quick-release snaps Part No 8.697-150.0 Description Knee Pads Dust Mask White cone mask with elastic, non-rated. ! 50/Box = 20 boxes/cs Part No 8.697-149.0 Description Dust Mask Shoe Covers – Blue Large, 100% polypropylene, blue shoe covers. !White tread for traction ! Elastic opening for a snug fit around the ankle Part No 8.697-432.0 Page 207 Description Shoe Covers – XL, Box / 300

CARPET & RESTORATION Maxshield Coveralls with Hood and Boots Coveralls come complete with hood and elasticized boots. Part No 8.697-156.0 8.697-155.0 8.697-157.0 8.697-158.0 Description Coveralls w/ Hood and Boots – Medium Coveralls w/ Hood and Boots – Large Coveralls w/ Hood and Boots – XL Coveralls w/ Hood and Boots – XXL Respirator, Full-Face MSA full-mask respirator. ! The MSA reusable, full facepiece, offers users comfort and convenience as well as cost-savings ! The facepiece is made of a thermoplastic elastomer, making it remarkably comfortable, soft and lightweight ! This is the MSA full-face mask only, filters and cartridges sold separately Part No 8.697-370.0 8.697-369.0 Shoe Covers – White 200/cs. Part No Description 8.697-139.0 Shoe Covers – White ! Offers unmatched fit and comfort with a clear blue facepiece Safety Glasses / Amber Amber lens safety glasses. ! These safety glasses are the next generation in super-cool, low-cost protective eyewear ! Ultra-fashionable impact protection that meets and exceeds ANSI Z87.1+ standards Part No 8.697-140.0 Description Safety Glasses / Amber Safety Glasses / Clear Clear lens, wrap-around safety glasses. ! Adjustable temples for length and flexability ! Lightweight and comfortable to wear ! Meets Z87.1 safety standards Part No 8.697-142.0 Description Safety Glasses / Clear Disposable Caution Sign Splash-Proof Safety Glasses Chemical splash goggle. ! Frame material – PVC plastic ! Lens material – polycarbonate ! Lens coatings – Duramass® scratch-resistant hard coating) ! Lens thickness – .060mm ! Strap – rubber (rubber straps on the protective goggles are latex-free) Part No 8.697-141.0 Description Splash Proof Safety Glasses Page 208 ! Style – indirect ventilation for chemical splash ! Replacement lenses available ! All lenses provide 99.9% UV protection ! Meets or exceeds ANSI Z87.1+ safety standard ! Light transmissions – Clear – 85% Inexpensive way to show your customers their safety is your primary concern. ! An inexpensive way for carpet cleaners to help keep customers safe ! Because these signs are inexpensive, cleaners can leave them on the job to show customers they care about their safety ! 21" long, folds into an 11 x 6.5 wide triangle Part No 8.697-428.0 Description Disposable Caution Sign Organic Vapor Respirator Set Cartridge Chemical cartridges for Advantage respirators. ! NIOSH-approved for respiratory protection against vapors ! Meets OSHA requirements for an approved cartridge Part No 8.697-133.0 Description Organic Vapor Respirator Set Cartridge ! The thermoplastic rubber subtracts 25% of the weight and adds softness to MSA’s Advantage 200 LS respirator ! The patented MultiFlex® System equalizes pressure on the face-seal area, while delivering exceptional stability so the respirator will not collapse during wear ! The AnthroCurve sealing surface instantly conforms to each wearer’s unique facial characteristics. Current Advantage 200 respirator wearers require no additional fit testing Part No 8.697-152.0 Description Respirator Half-Face – Large Description Respirator Full-Face – Medium Respirator Full-Face – Large Respirator, Half-Face – Large Advantage half-mask respirator, size large.

CARPET & RESTORATION Wands and Upholstery Tools Dual-Jet Wand 12" head, 1100PSI, 60" length. ! 2-jet design uses standard 11002 T-jets ! Side splashguard helps to contain overspray ! Stainless-steel solution hose ! Full-flow vacuum extraction ! Precision nozzles for best performance Part No 8.697-192.0 Description Dual Jet Wand Padded Assist Handle Part No 8.697-188.0 8.697-190.0 Description Padded Assist Handle – 1.5" Padded Assist Handle – 2" Stair Wand 22" Straight 22" straight with 2" flair tube. This stair tool’s design and its highpressure water and steam enable you to remove ground-in dirt on stairs from a standing position. ! 2-jet design uses standard 11002 T-jets Low-Profile Wand, 4-Jet If you want your wands to utilize the full potential of your truck mount’s blower to get the fastest drying time, then this is the wand for you. ! 4-jet design uses standard V-jets 95015 ! Side splashguard helps to contain overspray ! Goodyear, 3000 PSI solution hose ! Full-flow vacuum extraction ! Precision nozzles for best performance ! 2" tube Part No 8.697-191.0 Description Low Profile Wand 4-Jet – 12" ! Side splashguard helps to contain overspray ! Stainless-steel solution hose ! Full-flow vacuum extraction ! Precision nozzles for best performance Part No 8.697-195.0 Description Stair Wand 22" Straight Swivel-Head Ergonomic Stair Tool 30" 500PSI, open spray. Gum Blaster This 4" wonder tool does it all. Its double-bend design makes it an easy, comfortable wand to use. ! All Stainless-steel ! 800psi brass valve ! Closed-spray chamber ! Padded assist handle ! Stainless-steel solution line Part No 8.697-193.0 Description Gum Blaster ! 500 PSI, V2P brass valve ! Padded-assist handle ! Head swivels easily and stays in rotated position ! 1-jet brass Vee jet ! Perfect height for cleaning stairs Part No 8.697-200.0 Description Swivel-Head Ergonomic Stair Tool 30" Upholstery Tool 4" – Closed Precision nozzles for best performance. Smooth 4" vacuum path head for improved suction. Detail Tool k-800 PSI Valve w-Whip Closed ! 4"-wide vacuum path ! Smooth head for improved suction ! Full-flow vacuum extraction ! Precision nozzles for best performance Part No 8.697-182.0 Description Detail Tool K-800PSI Valve w-Whip Closed ! Tube diameter: 1.5" ! Head width: 4" ! Length: 10" ! Nozzles: 2503 or 2504 Part No 8.697-186.0 Description Upholstery Tool 4" – Closed ! Valve: K 105 ! Pressure: 800 PSI !Weight: 1.5 lbs ! Fill-low vacuum extraction Page 209

CARPET & RESTORATION Upholstery Tool 4" – Open Precision nozzles for best performance. Smooth 4" vacuum path head for improved suction. ! Tube diameter: 1.5" ! Head width: 4" ! Length: 10" ! Nozzles: 2503 or 2504 Part No 8.697-187.0 Description Upholstery Tool 4" – Open Window Washing Tools Rub Out PT – 12/cs Professional glass cleaner for removing hard water stains, rust, mineral deposits, lime scale and soap scum. ! Scrub stains without harming surface ! Super strength with a pleasant scent Part No 8.697-294.0 Description Rub Out PT 12/1 pint bottles S-Channel with Soft Squeegee Window Washing Bucket – 6 Gallon Heavy-duty bucket with ergonomic handle for glass cleaning. Accommodates 18" washers and squeegees. ! Heavy-duty, 6-gallon bucket with larger footprint for increased stability ! Easily fits 18" washer ! Rounded pour spouts on two corners make it easy to empty with more control ! Ergonomically-designed handle for comfort is stiffer and more stable for balance when carrying ! Use with optional snap-on lid and castors or bucket barge Part No 8.697-323.0 Description Window Washing Bucket 6 Gallon ErgoTec Safety Scraper 1.5" Sturdy s-p-on lid for Pro-Bucket. ! Unique locking system eliminates blades from sliding out while working ! Uses standard No. 9 (1-1/2") razor blades (not included) ! Includes all the features of the SafetyScraper with the added comfort of the new ergonomic grip ! Rubber grip prevents scraper from slipping in hand which makes removing soil from surfaces even easier Part No 8.697-284.0 Description ErgoTec Safety Scraper 1.5" Page 210 ! Ideal for colder temperatures ! Conforms to uneven surfaces ! Better glide with streak-free performance ! Longer lasting / superior packing ! Comes in 10/pk Part No 8.697-283.0 8.697-277.0 8.697-272.0 Description Squeegee Soft 10/pk – 18" Squeegee Soft 10/pk – 12" Squeegee Soft 10/pk – 6" Squeegee Soft – 10/pk Soft squeegee for window cleaning in reclosable blister pack. Part No 8.697-285.0 Description S-Channel w/ Soft Squeegee – 6"/10 per pack Stainless-steel “S” channel complete with ErgoTec soft replacement squeegee. ! Strong, long-lasting and rust-free stainless-steel construction ! Fits on ErgoTec, ProStainless-steel and GoldenPro squeegees ! Notched-channel system will not slip, wobble or bend T-Bar ErgoTec® Ergonomic T-bar with polypropylene handle. ! Features an ergonomic, two-component polypropylene handle for less strain and more control !Water wells for high-water retention ! Attaches to poles with a press fit for out-of-reach cleaning Part No 8.697-293.0 Description T-Bar ErgoTec – 14" ! Valve: K 105 ! Pressure: 800 PSI !Weight: 1.5 lbs ! Fill-flow vacuum extraction Scraper Blades – 100 Blades/pk Safety scraper replacement blades. ! Razor sharp No. 9 (1-1/2") standard blade for removing dirt ! Packed in a convenient reclosable plastic tray so blades are kept safe and dry to prevent rusting Part No 8.697-183.0 Description Scraper Blades – 100 Blades/pk

CARPET & RESTORATION Squeegee Soft Promo – 25/pk PromoPack soft rubbers in storage box. ! 12" soft rubbers in each pack, 25 pack ! Free box for storing rubbers and channels ! Reusable, adjustable UV-resistant plastic tube protects against dampness FIXI-Clamp Plastic clamp for attaching tools like brushes, sponges, cloths and other tools. ! Made of fiberglass-reinforced nylon ! Innovative design quickly and easily grips sponges, rags, cloths, chamois and mop heads by simply tightening the locking collar ! Also holds the HANDI-BRUSH ! Combined with an Unger telescopic pole, the Fixi becomes a high-rise cleaning tool to solve many cleaning problems without climbing dangerous ladders ! Use with many types of cleaning solvents and liquids ! Attaches easily to all Unger Poles Standard Sponge ! Use dry to clean walls, vents, ceilings and for fire restoration ! Made of standard sponge material ! Locks in the jaws of the Fixi Clamp Part No 8.697-278.0 Description Standard Sponge Part No 8.697-322.0 Description FIXI-Clamp Part No 8.697-275.0 Description Squeegee Soft Promo 25/pk – 12" Page 211

INDEX Equipment 1200 Series ............................................ 7 1700 Series ........................................... 13 1800 Series ............................................ 5 333 Model ............................................. 2 5700/5800 Series ....................................... 5 700 Series ............................................. 3 900/1400 Series ........................................ 4 9400 Series ............................................ 9 BD Series ............................................. 10 BDE Series ............................................ 14 BX Series ............................................. 10 CWC Series ........................................... 13 DB Series ............................................. 11 ET Series ............................................. 14 Gas-Engine Series ....................................... 6 HC Series ............................................. 11 HD Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 HD Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Heat Mizer ............................................ 15 Hot Box .............................................. 11 HWE Series ............................................ 8 Redhot Cannon ........................................ 15 SuperSkid HSDS Series .................................. 8 SuperSkid HSS Series .................................... 8 Trail Blazer ............................................. 9 Hotsy Branded Parts Adjustable Nozzle ....................................... 22 Ceramic Plunger Kits .................................... 29 Coil Insulation ......................................... 32 Coils ................................................. 32 Cold Water Lances ...................................... 16 Color-Coded 1/4" QC Nozzle Kits ........................... 22 Complete Seal Kits ...................................... 29 Detergent Flow Meter .................................... 31 Downstream Chemical Injectors ........................... 30 Dual Lance ............................................ 16 FasPump Quick Change Pump Assemblies ................... 25 Float Tank ............................................. 31 Flow Switch ........................................... 31 Fuel Filter/Water Separator ................................ 18 Geared Reduction for Hotsy Pumps ......................... 32 Guns ................................................ 16 Hot Water Lance ....................................... 16 HOTSY Adjustable Fan Nozzle ............................. 21 HOTSY Fuel Filter/Water Separator ......................... 18 HOTSY High / Low Adjustable Fan Nozzle .................... 21 Hotsy Hose Reels ....................................... 19 Hotsy Nozzle Protector ................................... 21 HOTSY Nozzles ........................................ 21 Hotsy Stackable Hose Reels & Accessories ................... 20 Hotsy Twist Quick Couplers ............................... 22 Inlet Chemical Injector ................................... 30 Lance Grip ............................................ 16 Maintenance Kit ........................................ 29 Plunger Oil Seal Kits .................................... 29 Pressure Relief Valves ................................... 30 Pressure Switch ........................................ 31 Provides 3 times longer seal life. ........................... 23 Pump Oil ............................................. 30 Pump Repair Kit Selection Chart ........................... 27 Pump Seal Kits ......................................... 29 Pump Tool Kits ......................................... 29 R1 1-Wire 4000 PSI Hose ................................ 17 R2 1-Wire 5000 PSI Hose ................................ 17 R2 2-Wire 6000 PSI Hose ................................ 17 Side Handle ........................................... 16 ST-56 Rollover Nozzle Head ............................... 22 The HOTSY Pump. ...................................... 23 Thermostats ........................................... 31 Touch-Up Paint ........................................ 18 Tuff-Flex 1-Wire 3000 PSI Blue Non-Mar Hose ................ 18 Tuff-Flex 2-Wire 4500 PSI Blue Non-Mar Hose ................ 18 Two-Gun Tee Coupler .................................... 22 Unloaders ............................................. 30 Valve Kits ............................................. 29 Wayne Burner Replacement Part Cross Reference Chart ......... 34 Wayne Burners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Detergents All Purpose Cleaners .................................... 36 Page 212

INDEX Aluminum & Stainless Steel Cleaners ....................... 38 Animal Hygiene & Bio-Security ............................ 41 Chemical Dispensing Equipment ........................... 43 Degreasers ............................................ 37 Environmentally Friendly ................................. 39 Floor Care ............................................ 41 Graffiti Remover ........................................ 40 Institution & Food Preparation ............................. 40 Oil Field & Heavy Equipment Cleaners ....................... 38 Parts Washers ......................................... 41 Specialty Cleaners ...................................... 40 Transportation Specialty Cleaners .......................... 39 Vehicle Wash Detergents ................................. 36 AP Trigger Gun ......................................... 45 AP Uninsulated Lances .................................. 50 AP Vacuum Motors .................................... 179 AP1000 Open Gun ...................................... 48 Aqua Master™ Model 440 ............................... 183 Aquatec 550 Series Diaphragm Pump ...................... 191 AR Pump Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 AR Pump Repair Kit Selection Chart ....................... 110 AR Triplex Ceramic Plunger Pumps ........................ 109 Automatic Pressure Regulator ............................ 117 Aviation Snips for Most Metals ........................... 200 B Generic Parts A A+ Surface Cleaner .................................... 167 Accumulator – Pulse Dampener ........................... 113 Accumulator by Interpump .............................. 113 Adapters – Brass ....................................... 68 Adapters – Steel ........................................ 71 Adjustable Bronze Float Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Adjustable Flow-Thru Thermostat ......................... 162 Adjustable Foamer with Tank ............................. 174 Adjustable Nozzle ....................................... 89 Adjustable Nozzle Holder ................................. 51 Adjustable Thermostat .................................. 162 Admiral Pump Repair Kits ............................... 100 Air Filter / Regulators ................................... 177 Air King Pivoting High-Velocity ........................... 200 Air Valve – Coil Blow Out ................................ 133 Air-Driven Pump ...................................... 177 Air-Operated Pump .................................... 177 Air-Power Sprayers .................................... 174 Amazing Pocket Reference – Third Edition .................. 175 Ametek-Lamb Vacuum Motors ........................... 180 AMP and Voltmeters ................................... 135 Anti-Seize Compound .................................. 114 AP Dump Guns ........................................ 48 AP Hose Reels ......................................... 62 Page 213 Backflow Preventor – Check Valve ......................... 130 Baldor Motors – C-Face Open Drip Proof (ODP) .............. 137 Baldor Motors – Open Drip Proof (ODP) .................... 138 Ball Shut-Off Valve 1/4" ................................. 200 Ball Valve - 3-Way ..................................... 131 Ball Valves - Brass ..................................... 131 Ball Valves - Brass Mini ................................. 131 Ball Valves - Compact PVC ............................... 131 Ball Valves - Polypropylene .............................. 131 Ball Valves - PVC ...................................... 131 Banded Coupling ....................................... 73 Base Plates for Ignitors ................................. 147 Battery Boxes with Cover, Marine Style ..................... 166 Beckett Misc. Parts .................................... 143 Beckett Tune-Up Kit .................................... 146 Belt Drive Pumps ....................................... 91 Big Guns ............................................. 47 Big Stainless-Steel Lances and Side Handles .................. 50 Black Pressure Switch .................................. 155 Blower Wheel ......................................... 145 Blower Wheels ........................................ 146 Blue Top Filter ......................................... 77 Boot Hazmat / Flood .................................... 207 Brass Bulkhead / Tank Fittings ............................ 193 Brass Check Valves – Spring-Loaded ....................... 129 Brass Float Valve Assembly .............................. 128 Brass Float, Ball and Stem ............................... 128 Brass Metering Valve ................................... 132

INDEX Brass Pressure Regulator ............................... 192 Breaker Switches ...................................... 163 Briggs & Stratton Engine Parts ........................... 136 Briggs & Stratton Engines – Gasoline ...................... 136 Brushes ............................................. 173 Bulkhead Fittings ...................................... 193 Burner Ignitors ........................................ 146 Burner Ignitors ........................................ 147 Burner Motors ........................................ 145 Burner Transformers ................................... 147 Burner Transformers ................................... 147 Bushings – Brass ....................................... 68 C Cam Switch (“Big Boot”) ................................ 161 Cam Switch and Box – 60 AMP On/Off ..................... 161 Car Wash Booms - “Reflex” ............................. 177 Car Wash Vacuum Hose CW150 and CW200 ................. 179 Carbon, Vapor Lock Filter ................................ 198 Carpet Repair Replacement Blades ........................ 200 Carpet Shears Bent Handle .............................. 200 Ceramic Plunger Kits .................................... 97 Ceramic Plungers ...................................... 112 Ceramic Unitized Ball Valve ............................... 46 Check Hose Barbs ...................................... 69 Check Valves – 1200 PSI ................................ 129 Check Valves – Swing Action ............................. 129 Check/Foot Valve ....................................... 75 Chem Injector - 5500 PSI Stainless Steel .................... 124 Chemical Filter - Brass ................................... 74 Chemical Injector - ST-60 ............................... 125 Chemical Injector - ST-62 Variable ........................ 125 Chemical Injectors - 400 Series ........................... 126 Chemical Injectors - Robokim ............................ 125 Chemical Injectors - Robokim Quick-Coupled ................ 125 Chemical Line w/ Filter ................................... 74 Chemical Meter and Selection Valve - ST-66 ................. 132 Chemical Metering / On-Off Valve ......................... 132 Chemical Metering Valve - ST-61 .......................... 125 Chemical Metering Valves ............................... 132 Chemical Strainer - Plastic ................................ 74 Chrome Ball Valve ..................................... 201 Circuit Breakers ....................................... 160 CleanCut Fuel Pump .................................... 146 Clear Bowl Fuel Filter .................................... 77 Clear PVC Tubing ....................................... 58 Clear Reinforced PVC Tubing .............................. 57 Cold Weather Garden Hose ............................... 57 Comet Pumps and Pump Kits ............................ 111 Common Parts – Beckett & Wayne ........................ 145 Compact Foamer ...................................... 174 Compact Pressure Switch ............................... 155 Compact Thermal Relief Valves ........................... 133 Complete Pump Extraction Kit ............................ 114 Complete Seal Kits ...................................... 97 Complete Wheels ...................................... 166 Connector 1.5" Stainless-Steel ............................ 201 Connector 1.5"-2" Stainless-Steel .......................... 201 Connector 2" Stainless-Steel ............................. 201 Connector 2" Stainless-Steel ‘Y’ Vac ....................... 201 Connector Hose – 2'-10' ................................. 59 Connector Hose / Car Wash Bay Hose – 12'-25' .............. 180 Connector Hose / Car Wash Bay Hose – 12'-25' .............. 59 Connector: Barb Hose 1.5"-1.5" ........................... 201 Connector: Barb Hose 2"-1.5" ............................. 201 Connector: Barb Hose 2"-2" .............................. 201 Contactors & Relays ................................... 187 Control Set “W” Series / Integrated Regulator/Unloader ........ 120 Controller and Contractor Tool - Genisys™ .................. 143 Copper and Plastic Float Balls ............................ 128 Cord Caps/Plugs ...................................... 163 Cord Hugger 3 x 12 .................................... 203 Corrosion-Resistant ABS Gauge .......................... 134 Coupler: 1/4" Female ................................... 201 Coupler: 1/4" Female Stainless-Steel ....................... 201 Coupler: 1/4" Female, Secure Lock ........................ 201 Coupler: 1/4" Male Quick Connect PH ...................... 202 Coupler: 1/4" Male Quick-Connect Econo .................... 202 Coupler: 1/4" Male Stainless-Steel ......................... 202 Coupler: Quick Connect 1/4" F Econo ....................... 202 Couplers - Quick Connective .............................. 65 Couplers Built by Browning or Lovejoy ..................... 140 Coxreels Hose Reels. .................................... 63 Crimp Fittings ......................................... 57 Cross – 4 Connects ..................................... 72 Page 214

INDEX Cyclone Rotary Flat Surface Cleaner ....................... 169 D Decals & Labels ....................................... 188 Delavan Fuel Nozzles ................................... 151 Delavan Fuel Nozzles - continued .......................... 152 Detail Components ..................................... 186 Detail Tool k-800 PSI Valve w-Whip Closed .................. 209 Diaphragm Check Valves – Nylon ......................... 193 Diaphragm Float Valve .................................. 128 Diaphragm Kits for Yamada Pumps ........................ 176 Diaphragm Pump Units ................................. 190 Digital Monitor ........................................ 162 Disposable Caution Sign ................................ 208 Disposable Nitrile Gloves ................................ 207 Double Hose Reel Stand ................................ 204 Double Nozzle Head ..................................... 89 Double Shut-Off Couplers and Plugs ........................ 66 Draft Diverters & Rain Caps .............................. 149 Drain Cocks ........................................... 70 D-Ring Handi Tie 1.5 ................................... 203 Drum / Tank Pump – Crank Type .......................... 173 Drum Pump .......................................... 206 Drum Pumps ......................................... 172 Drum Tool Accessories ................................. 173 Dual Lances ........................................... 49 Dual Trigger Lance ...................................... 50 Dual-Chemical Systems ................................. 172 Dual-Jet Wand ........................................ 209 Duckbill Snipping Shears ................................ 199 Dump Gun ............................................ 48 Dust Mask ........................................... 207 E Easy-Start Val. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Easy-Start Valve ....................................... 134 EATON Cutler-Hammer DP Contactors ...................... 157 Elbow – Steel .......................................... 72 Elbows - 45° .......................................... 72 Elbows - 90° .......................................... 73 Page 215 Elbows – 90° – Brass .................................... 69 Electrode/Insulator Assembly ............................ 143 Enclosure Box for Magnetic Motor Starter Sets ............... 160 Engine Parts - Kohler Lombardini ......................... 137 Engines - Kohler Lombardini – Diesel ...................... 137 ErgoTec Safety Scraper 1.5" .............................. 210 Erie Motortrol® Valve .................................. 183 Extech pH Meter Buffer Solution .......................... 197 Extended Twist Seal Coupler .............................. 66 Extension Wand Control Kit ............................... 51 Extruded or Forged Tees – Brass ........................... 69 EZ Moves Hard Surface Pro .............................. 200 EZ Moves Pro ......................................... 200 F Faucet Kit Adapter ..................................... 204 Female Crosses – Brass Extruded .......................... 69 Fiber Trapper Pre-Filter ................................. 198 Fiberglass “Super Handles” .............................. 173 Fiberglass Telescoping Wands ............................. 52 Field Attachable Couplings ................................ 58 Filter - “The Big One” ................................... 74 Filter and Parts - High-Volume ............................. 76 Filters - Clear Bowl ...................................... 74 Filters - Heavy-Duty In-Line ............................... 74 Filters & Baskets ...................................... 184 FIXI-Clamp ........................................... 211 Flanges .............................................. 115 Flanges .............................................. 115 Flat-Free Tires ........................................ 166 Flex Couplers ......................................... 115 Flex Couplers ......................................... 115 Flex Couplings ........................................ 143 Flex Lances ........................................... 52 Flex Lances .......................................... 178 Flex Line Bypass / Supply Line Hose ........................ 58 Flojet Diaphragm Pump ................................. 190 Flow Control Metering Valve ............................. 132 Flow Control Metering Valve ............................. 132 Flow Meters .......................................... 133 Flow Selector Valve .................................... 131 Flow Switch .......................................... 154

INDEX Flow Switch .......................................... 154 Flow Switch - 7300 PSI Stainless-Steel ..................... 155 Flow-Thru Gun ......................................... 48 Foam Brush and Accessories ............................. 177 Foam Cannon .......................................... 90 Foam Cannon ......................................... 174 Foam Jet Kit ......................................... 174 Foam Nozzle Attachment ................................ 195 Foot-Controlled Pressure Valve ........................... 172 Forged-Brass Ball Valves ................................ 130 Foster Double Shut-Off Quick Couplers ...................... 66 Frames, Direct Drive & Belt Drive .......................... 165 Fuel Caps ............................................ 166 Fuel Conditioner and Soot Remover ........................ 146 Fuel Filter / Water Separator ............................... 77 Fuel Filter / Water Separator ............................... 77 Fuel Filters ............................................ 76 Fuel Oil Pressure Gauge ................................. 134 Fuel Pumps .......................................... 146 Fuel Solenoid Valve - 12V DC KIP ......................... 147 Fuel Tank - 9-Gallon Diesel ............................... 165 Fuel Tanks ........................................... 165 Fuses ............................................... 160 Fuses ............................................... 178 Fuses ............................................... 188 G Galvanized Pipe Fittings .................................. 73 Garden Hose – Apex Quality ............................... 56 Garden Hose Fittings .................................... 71 Gas Burner Rings – N/G or L/P Gas Jets .................... 148 Gas Pilots ............................................ 150 Gas Regulators ....................................... 149 Gas Valve Accessory Components ......................... 153 Gas Valves - 1" by Robert Shaw ........................... 150 Gas Valves – LP or Natural. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 Geared Reduction ..................................... 114 Geared Reduction ..................................... 114 Geared Reduction Units ................................. 114 General Fuel Filter Element ................................ 77 General Pump GL5 80w-90 Gear Lube ...................... 113 General Pump TMT Flow Switch .......................... 154 Genuine Interpump / General Pump Kits .................... 107 GFCI Module 20 Amp – 120V or 240V ...................... 163 Giant Trigger Guns ...................................... 45 Gloves .............................................. 175 Goff’s Curtain Walls .................................... 170 Grandi Brush ......................................... 205 Grandi Brush (Head Only) ............................... 205 Grandi Groom ........................................ 205 Grandi Groom (Head Only) .............................. 205 Grandi Groom Conversion ............................... 206 Ground Fault Circuit Interrupters (GFCI) .................... 164 Gum Blaster .......................................... 209 Gun Assembly - 910 Spot Spray. .......................... 191 Gun Swivel ............................................ 67 Gutter Cleaner Attachment ................................ 51 H Handi Brush .......................................... 205 Handi Groom Brush .................................... 206 Handles ............................................. 184 Hard-Surface Spinner Tool ............................... 196 Heating Elements & Thermostats .......................... 184 Heavy-Duty Swivels .................................... 192 HEPA Filter PRED 1200 ................................. 198 Hex Coupling – Steel .................................... 72 Hex Couplings – Brass ................................... 68 Hex Couplings - Reducing – Brass .......................... 68 Hex Head Plugs ........................................ 70 Hex Nipple – Steel ...................................... 72 Hex Nipples – Double – Brass ............................. 68 Hex Pipe Plugs – Steel ................................... 73 Hex Reducing Nipples – Brass ............................. 69 Hex Socket Head Plugs .................................. 70 Hide-A-Hose Swivel Cuff ................................ 202 High-Limit Switch ..................................... 156 High-Limit Switch w/ Wire Lead ........................... 156 High-Pressure Ball Valves ............................... 130 High-Pressure Check Valves ............................. 129 High-Pressure Nozzle Filters .............................. 88 Hi-Lo Injector ........................................ 125 HL250 High/Low Variable Angle Nozzle ...................... 89 Page 216

INDEX Hobby Gun, Lance and Hose .............................. 52 Hobby Hose ........................................... 56 Honda Engine Parts .................................... 136 Hose - 1-Wire .......................................... 53 Hose - 2-Wire .......................................... 53 Hose - 3/8" Blue Tuff-Flex 1-Wire 4000 PSI ................... 55 Hose - 3/8" Blue Tuff-Flex 2-Wire 6000 PSI ................... 55 Hose - 3/8" Gray - Wrapped ............................... 54 Hose - Legacy High-Pressure ............................. 53 Hose - Legacy Rawhide 2-Wire 3/8" Blue ..................... 54 Hose - Rawhide 1-Wire 3000 PSI Smooth Non-Marking ......... 54 Hose - Whitewater® Combination Steam Hose ................ 55 Hose Barbs – Brass ..................................... 70 Hose Bend Restrictors ................................... 56 Hose Clamps .......................................... 71 Hose Cuff 1.5"-2" Small End Threaded ...................... 202 Hose Cuff 2" Swivel Reducer ............................. 202 Hose Cuff 2"-1.5" Both Ends Threaded ...................... 202 Hose Hook 1.5 ........................................ 202 Hose Hugger 3 x 27 .................................... 202 Hose Hugger 3 x 34 .................................... 202 Hose Reel Stand ....................................... 204 Hour Meters for Gasoline Engines ......................... 135 Hudson Float Valve .................................... 129 Hypro Roller Pumps .................................... 189 I Indicator Lights ....................................... 163 Industrial Chemical Sprayer .............................. 191 Injector - Adjustable Quick-Connect ........................ 127 Injector - Amerimax .................................... 124 Injector - ST-64 Up Stream .............................. 125 Injectors - Brass ....................................... 127 In-Line Can-Type Filters and Parts .......................... 75 In-Line ClearView Filter .................................. 75 In-Line Filter - All Metal .................................. 74 In-Line Filter - Green-Cap ................................. 74 In-Line High-Pressure Nozzle Filters ........................ 76 Instant Hold Replacement Disks .......................... 200 Insulation and Rigid Disc/Donuts .......................... 153 Interchangeable Orifice – Fits Nozzles Above .................. 88 Interpump / General Pump Kit Selection Chart ................ 106 Page 217 Interpump / General Pumps .............................. 103 Interpump Packing Extractor Tool ......................... 113 J J.E. Adams Gun ........................................ 45 Jetter Pulse Valves ..................................... 112 JIC Nipples – Brass ..................................... 69 JIC Swivels ........................................... 68 JIC x Pipe Nipples ...................................... 69 Junction Boxes ....................................... 159 K K Series Pressure Regulators ............................ 120 K Series Pressure Regulators Kits ......................... 120 Kerick Float Valve ...................................... 129 Keyed Ignition Switch – 12V DC .......................... 137 Kip Solenoids ......................................... 182 Knee Pads ........................................... 207 L Lafferty Airless Foam Kit ................................ 174 Lance Handles/Accessories ............................... 51 Lance Nozzle Couplers ................................... 87 Legacy “Best” Spray Gun ................................. 45 Legacy “Industrial” Spray Gun ............................. 45 Legacy Air Mover (LAM3) ............................... 199 Legacy Compact Foamer ................................. 90 Legacy Flow Switch .................................... 154 Legacy Flow Switch .................................... 154 Legacy HD Pump Repair Kit Selection Chart ................. 101 Legacy Hose Reel Swivels ................................ 61 Legacy Hose Reels ...................................... 61 Legacy Industrial Gun & Lance ............................ 52 Legacy Oval Molded Grip Lances ........................... 49 Legacy Pump Repair Kit Selection Chart ..................... 98 Legacy Pump Repair Kits ................................. 99 Legacy Pump Repair Tool Kit .............................. 98 Legacy Pumps (Belt Drive Units) ........................... 92 Legacy Pumps (Direct Drive Units) ......................... 94

INDEX Legacy Square Molded Grip Lances ......................... 49 Legacy Stackable Hose Reels .............................. 60 Legacy Superlite Stainless-Steel Dual Lance .................. 48 Legacy Universal Unloader (UU1) ......................... 116 Legacy Vented Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Lid Supports ......................................... 184 Liquid-Tight Strain Relief Connector for Cable, Wire and Tubing .. 164 Locks for Meter Boxes .................................. 178 Long Range Tip – 15 x 1 – Stainless-Steel ................... 192 Low-Flow Brass Pressure Regulator ....................... 192 Low-Pressure Swivels .................................. 178 Low-Profile Wand, 4-Jet ................................ 209 LP Conversion Kit for Robert Shaw ........................ 150 M M407 Trigger Gun ...................................... 45 Machine Control Cam Switches ........................... 160 Magnetic Motor Starters ................................ 158 Male Branch Tees – Brass ................................ 69 Manual Motor Starter w/ Sealed Box ....................... 160 Mat Clamp ........................................... 171 Maxshield Coveralls with Hood & Boots .................... 208 Measuring Cups ....................................... 187 Measuring Cups ....................................... 206 Measuring Cups – 2 oz ................................. 206 Mecline AL 35 Gun ...................................... 47 Medium-Pressure Swivels ............................... 178 Merchant Coupling ...................................... 73 Mini Ball Valves ....................................... 130 Misc Replacement Parts ................................ 188 Misc. Hose Cuffs and Accessories ......................... 202 Miscellaneous Parts .................................... 166 Moisture Sensor, Hydro Shark ............................ 197 Molded Plastic Float Tanks ............................... 165 Molded Power Cord .................................... 158 Mosmatic Roof Cleaner ................................. 169 Mosmatic Surface Cleaners & Duct Cleaner .................. 168 Motors - A.O. Smith – Pressure Washer .................... 139 Motors – Totally Enclosed Fan Cooled (TEFC) ................ 139 Motors - WEG – Pressure Washer ......................... 139 MV Hi-Lo Turbo Nozzle .................................. 88 MV Hobby Wash Gun .................................... 48 MV Lance Handle ....................................... 51 MV Triple-Function Nozzle ................................ 87 MV925 Gun & Lance Kit .................................. 52 MV925 Gun, Lance, Hose Kit .............................. 52 N Nap Brush ........................................... 205 Nickel-Plated Brass Ball Valves ........................... 130 Nipples – Brass ........................................ 68 Nitrile Flock-Lined Gloves ............................... 207 Nozzle - Turbo ......................................... 85 Nozzle - Dirt Killer Rotating ............................... 87 Nozzle - Duo-Reg ....................................... 88 Nozzle - Multi-Fan ...................................... 88 Nozzle Accessories .................................... 147 Nozzle Fan Selection .................................... 78 Nozzle Kits - Legacy 4/pk and 5/pk Color-Coded QC ............ 79 Nozzle Protector/Coupler ................................. 90 Nozzle Sets - 4/pk and 5/pk Color-Coded QC .................. 80 Nozzle Size Selection Chart ............................... 78 Nozzles .............................................. 186 Nozzles - Broad Spray Stainless-Steel ....................... 82 Nozzles - General Pump .................................. 80 Nozzles - Legacy Individual 1/4" QC ......................... 79 Nozzles - Spraying Systems ............................... 81 Nozzles - Suttner Turbo .................................. 86 Nozzles for Low-Pressure Applications, Brass ................. 82 Nylon Pressure Regulator ............................... 193 O Oil Burner - 14V ADC ................................... 143 Oil Burners ........................................... 144 Oil Burners - 115V / 230V ............................... 142 Oil Solenoid Valve ..................................... 148 Oil-Fired Hot Box ...................................... 169 ON / OFF Rotary Switch ................................. 158 On/Off Cam Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 On/Off Switch with box (“Elektra”). ........................ 161 Open Guns ............................................ 48 Orange 600 Sprayer Hose & Ribbed PVC Sprayer Hose ......... 57 Page 218

INDEX Orificed Hose Barb ...................................... 70 O-Ring Tool .......................................... 113 O-Rings .............................................. 64 Ozone Generator Villa 1000 .............................. 197 P PA Float Valve ........................................ 128 PA Linear Gun ......................................... 45 PA Trigger Gun ......................................... 47 Packing and Seal Kits ................................... 112 Packing Extractor ...................................... 113 Padded Assist Handle .................................. 209 Perfect Patch ......................................... 200 Performance Tables ................................... 189 Phoenix Flow Switch w/ Pilot ............................. 154 Pipe Nipple – Zinc ...................................... 73 Pipe Street Elbows ...................................... 73 Pipe Tees ............................................. 73 Pipe Thread Hex Nuts ................................... 70 Piston Pumps ........................................ 112 Plastic Dip Tube Assembly ............................... 166 Plastic Fittings ........................................ 194 Plastic Protector Pads .................................. 207 Plunger Oil Seal Kits .................................... 97 Poly-Molded Sprayer ................................... 195 Powered Damper ...................................... 150 Predator 1200 Portable Air Scrubber ....................... 198 Predator 600 Portable Air Scrubber ........................ 198 Premium Ball Shut-Off Valve ............................. 201 Pressure and Temperature Test Set ........................ 135 Pressure Gauges ...................................... 134 Pressure Loop - 1/4", 3/8" and 1/2", 2-Wire ................... 55 Pressure Reducer/Injector - Exact-A-Flow ................... 127 Pressure Regulator .................................... 134 Pressure Switch ....................................... 155 Pressure Washer Accessory Kit ............................ 52 Pressurized Drying System-21 ........................... 199 Professional Sandblast Head ............................. 170 Professional Stainless-Steel Sprayer ....................... 195 Profit From Power Washing .............................. 175 Propane Gas Hose ..................................... 150 Propane Gas Regulators ................................ 149 Page 219 Propane Tanks ........................................ 150 Proportioners ......................................... 183 PTO Geared Multiplier .................................. 114 Pulley Bushings ....................................... 141 Pulleys .............................................. 140 Pulleys .............................................. 141 Pulsar Unloaders ...................................... 118 Pulse Hose ............................................ 56 Pump Lube .......................................... 113 Pump Oil ............................................ 113 Pump Parts and Tools .................................. 112 Pump Rails ........................................... 97 Pump Selection Chart for Legacy HD Direct Drive Pump ......... 97 Pump Technical Information ............................. 115 Pump Valve Kits ........................................ 96 Pumps & Pump Seals .................................. 186 Pumptech Pump ...................................... 114 Push Button and Contact Blocks .......................... 157 Push-N-Lock Barbs ..................................... 70 PVC Check Valve ...................................... 130 Q QD Connector Sleeve Set ................................ 203 Quick Connective Couplers - Foster ......................... 65 Quick Couplers ......................................... 64 Quick-Coupled Amerimax ............................... 124 R Racor Filter Funnel ...................................... 77 Rain Suit ............................................ 175 RainTite Switch Box .................................... 160 Red Pressure Switch ................................... 155 Reducing Bushing – Steel ................................ 73 Reference / Calculation Guide ............................ 140 Regulating Relief Valve ................................. 124 Regulator - VS 200 / 180 High-Volume ..................... 123 Regulator / Relief Valve - ST-230 .......................... 121 Regulator / Relief Valve - VS 220 .......................... 124 Regulator / Relief Valve - VS 350 .......................... 123 Regulator / Relief Valve VS 500 High-Pressure .............. 123

INDEX Regulator / Unloader - ST-261 ............................ 121 Regulator / Unloader - ST-280 ............................ 122 Regulator / Unloader VRS3 .............................. 117 Regulator Valve - Timax Pressure ......................... 123 Regulator/Unloader - HM ................................ 121 Regulators / Unloaders ................................. 117 Relay Switch ......................................... 158 Relays .............................................. 159 Replacement Accessories ................................ 51 Replacement Fuel Cap .................................. 165 Replacement/Repair Kits for Solenoids Valves ................ 182 Respirators .......................................... 208 Rocker Switches ...................................... 162 Rollover Nozzle – Twist-Type .............................. 89 Rollover Nozzle Head - ST-56 .............................. 88 Romex Connectors (Metal) .............................. 163 Rosebud Nozzle Guard ................................... 83 Rotary Switch - 8-Position ............................... 178 Rotojet 2000 .......................................... 88 Rotojet 3700 / Rotojet 5800 ............................... 85 Rotojet Soft – Hard Rotating Nozzle ......................... 87 Rotomax Rotating Nozzle 3500 and 5800 PSI ................. 87 Rub Out PT .......................................... 210 Rubber Parts ......................................... 165 Rupture Disks ........................................ 133 S Safety Glasses ........................................ 208 Safety Pressure Relief Valves ............................. 123 Safety Pressure Relief Valves ............................. 133 Sandblast Kit – Carbide Nozzle Industrial Grade .............. 170 Sandblast Nozzles Tips ................................. 170 S-Channel with Soft Squeegee ............................ 210 Scraper Blades – 100 Blades/pk ........................... 210 Seal Kits .............................................. 96 Seals & Gaskets ....................................... 184 Second-Stage Particulate Filter ........................... 198 Self Serve Underbody Wand Assembly ..................... 170 Series 505 Stainless-Steel ............................... 127 Sewer Hose ........................................... 56 Sewer Hose .......................................... 172 Sewer/Tube Cleaning Nozzles .............................. 90 Sewer/Tube Cleaning Nozzles ............................. 171 Shipping Tape and Dispenser ............................. 175 Shoe Covers .......................................... 207 Skimmer Components .................................. 187 Slip-on Nozzle Protector ................................. 89 Small Engine Test Equipment ............................. 140 Smoke Tester – Diagnostic Tool ........................... 147 Snap Fuel Nozzle Check Valve ............................ 151 Snap N Lock Cuff ...................................... 203 Snap N Lock Cuff 2" .................................... 203 Soap Nozzles .......................................... 83 Soft-Edge and Hard-Edge Nozzle Protector ................... 83 Solenoid Valve Specifications ............................ 181 Solenoid Valves ....................................... 181 Solenoids w/ Built-In Strainer ............................ 182 Solution Hose 50', 1/4" 1500 PSI .......................... 203 Solution Hose 50', 1/4" 3000 PSI .......................... 203 Solution Hose 50', 3/8" Blue, 3000 PSI ..................... 204 Solution Hose Live Swivel Assembly ....................... 196 Solution Hose Reel ..................................... 203 Sonin 4-in-1 Multifunction Detector ........................ 196 Sonin Digital Moisture Meter ............................. 196 Sonin Laser Targeting Range Finder ....................... 197 Sonin Moisture Test Meter ............................... 197 Sonin Multi-Measure 45 ................................. 197 Speedmaster Throttle Control ............................ 135 Spotting Bottle ........................................ 206 Sprayer – Chemical-Resistant ............................ 195 Sprayermaster – High-Pressure ........................... 195 Sprayermaster – Standard ............................... 195 Spray-Flex™ Flex Wand .................................. 51 Spraymax Trigger Gun .................................. 191 Squeegees ........................................... 211 ST-1500H Open Gun .................................... 48 ST-36 Pit Boss Sludge Sucker ............................ 172 ST-51N Adjustable Nozzle ................................ 89 Stack Bracket ......................................... 205 Stainless-Steel Ball Valves – 2000 PSI ...................... 130 Stainless-Steel Bay Accessories ........................... 178 Stainless-Steel Check Valves ............................. 129 Stainless-Steel Float Tank ............................... 165 Stainless-Steel Industrial Sprayer ......................... 195 Stainless-Steel Pressure Gauges .......................... 134 Page 220

INDEX Stainless-Steel Pressure Gauges .......................... 135 Stainless-Steel Quick Couplers ............................ 64 Stainless-Steel Sewer Nozzles ............................ 171 Stainless-Steel Sprayer ................................. 195 Stair Wand 22" Straight ................................. 209 Standard Sponge ...................................... 211 Starter Solenoid - 12V DC ............................... 137 Steam Nozzle .......................................... 89 Steam Valve .......................................... 132 Steel Utility Gauges .................................... 134 Stems Only .......................................... 128 Step-Down Transformers ................................ 159 Street Elbow – Steel ..................................... 72 Street Elbows – Brass ................................... 69 Street Tee – Steel ....................................... 72 Street Tees – Brass ..................................... 69 Styrofoam Blocks – Blue ................................ 207 Styrofoam Blocks – White ............................... 206 Suction Foot Valve - ST35/35R ............................ 75 Surface Cleaner Nozzle Recommendation ................... 169 Suttner Dual Lances ..................................... 50 Suttner Push and Pull Lance .............................. 50 Suttner Trigger Gun ..................................... 47 Suttner Trigger Guns .................................... 46 Suttner Trigger Guns .................................... 46 Swivel Assembly ...................................... 205 Swivel Cuff: Big End Threaded ........................... 202 Swivel Grout Brush .................................... 205 Swivel Hose Barbs – Low Pressure ......................... 70 Swivel-Head Ergonomic Stair Tool 30" ...................... 209 Swivels ............................................... 67 Swivels - 90° .......................................... 67 Swivels – Ball Bearing ................................... 68 Swivels – Right Angle ................................... 67 Swivels - Stainless-Steel ................................. 67 Swivels – Stainless-Steel Ball Bearing ....................... 68 Swivels - Stainless-Steel, High-Pressure and Economy Brass ..... 67 T Tandem Hose Clamp ................................... 203 Tank Screen/Strainer .................................... 76 T-Bar ErgoTec® ....................................... 210 Page 221 U Undercarriage Cleaner .................................. 169 Universal “Elektra” ..................................... 161 Unloader - Hypro-Style ................................. 121 Unloader - YU – High-Volume ............................ 121 Unloader Mounting Block ................................ 124 Unloaders - AR Bolt-On ................................. 122 Unloaders - Flow-Actuated ............................... 122 Unloaders - Gymatic ................................... 122 Unloaders - MG4000 Series .............................. 123 Unloaders - Pressure-Actuated ........................... 122 Unloaders - Pressure-Actuated 13 GPM .................... 122 Upholstery Tool 4" – Closed .............................. 209 Upholstery Tool 4" – Open ............................... 210 UV Flashlight Blaze 128 LED ............................. 196 Tee – 3 Connects ....................................... 72 Teflon® Thread Sealing Tape ............................. 174 Temperature Gauges ................................... 135 Thermal Relief Valves ................................... 132 Thread Lock Products .................................. 175 Timer ............................................... 160 Timers & Switches ..................................... 185 Tip-Jet Nozzle System – Tips and Components ................ 83 Toggle / Push Button Switch ............................. 156 Toggle Switch - 30 AMP ................................. 156 Transformers ......................................... 178 Trapped Pressure Unloader Valves ............................ Trigger Valves ........................................ 191 Trigger-Control Spray Lances ............................. 192 Trigger-Jet Spray Lances ................................ 192 Truck-Mount Hose, Heavy-Duty Blue ....................... 204 Truck-Mount Hose, Heavy-Duty Gray ....................... 204 TRV Thermal Relief Valves ............................... 133 Turbine Series Guns .................................... 191 Turbo A+ Nozzle Kit ..................................... 84 Turbo Nozzles ......................................... 84 Turntable Drive Components ............................. 185 Twin-Diaphragm Spot Spray Pump ........................ 193 Twist Seal Couplers ..................................... 65 Twist Seal Couplers ..................................... 66

INDEX V Vac Switch – Burner Control ............................. 155 Vacuum Accessories ................................... 179 Vacuum Hose Reel ..................................... 204 Vacuum Hose Shelf Hook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 Valves - Honeywell Gas ................................. 148 Variable Angle Nozzle .................................... 89 VB130 Regulator / Unloader ............................. 118 VB200 / 150 High-Volume Unloader ....................... 118 VB350 / 4 Unloader .................................... 119 VB7 Regulator / Unloader ............................... 118 VB75 / VB135 ........................................ 119 VB80 / 400 Stainless-Steel Unloader ....................... 119 VB85 / 820 Regulator / Unloader .......................... 118 VBA35 / VB55 Unloader Valves for Legacy HD Pumps ......... 117 V-Belts - Super “Gripnotch” .............................. 141 VBT Unloader ......................................... 116 Vertical Float Tank Valve ................................. 129 Vinyl Disposable Gloves ................................. 207 Vinyl Electrical Tape .................................... 163 Vinyl Tubing ........................................... 57 Vinyl-Coated Wand Hook ............................... 204 Viper Rotating Nozzle .................................... 87 Voltage Regulator - Heavy-duty 15 Volt ..................... 137 Voltmaster Generator ................................... 162 V-Packing Insertion Tool Kit .............................. 113 VRT100 Unloader Valves ................................ 118 VRT3 Unloader Valves .................................. 117 W Wall Buddy ........................................... 206 Wash Gun - RB65 ..................................... 179 Water Broom 16" ...................................... 171 Water Leveling System ................................. 187 Waterproof ExStik pH Meter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 Wayne Burner Parts .................................... 145 Whisper Wash Flat Surface Cleaners ....................... 167 Whisper Wash Flat Surface Cleaners Mosmatic Gun Swivel ..... 168 Winco AC Generator .................................... 162 Window Washing Bucket – 6 Gallon ....................... 210 Wire Loom – For Wiring Harnesses ........................ 163 Page 222 X X-Jet Long Range Nozzle ................................. 51 XT Overloads for DP Contactors .......................... 157 Y Yamada Pumps ....................................... 176 Y-Trap Strainer ......................................... 75 Z Zinc-plated Heavy Wall Steel Pipe Fittings .................... 71 ZipWall 12' Poles – 2/pk ................................ 199 ZipWall Carrier Bag .................................... 199 ZipWall Side Clamp – 2/pk ............................... 199 ZipWall Zipper ........................................ 199

NOTES Page 223

NOTES Page 224

1 Publizr

Index

1. 1
2. 2
3. 3
4. 4
5. 5
6. 6
7. 7
8. 8
9. 9
10. 10
11. 11
12. 12
13. 13
14. 14
15. 15
16. 16
17. 17
18. 18
19. 19
20. 20
21. 21
22. 22
23. 23
24. 24
25. 25
26. 26
27. 27
28. 28
29. 29
30. 30
31. 31
32. 32
33. 33
34. 34
35. 35
36. 36
37. 37
38. 38
39. 39
40. 40
41. 41
42. 42
43. 43
44. 44
45. 45
46. 46
47. 47
48. 48
49. 49
50. 50
51. 51
52. 52
53. 53
54. 54
55. 55
56. 56
57. 57
58. 58
59. 59
60. 60
61. 61
62. 62
63. 63
64. 64
65. 65
66. 66
67. 67
68. 68
69. 69
70. 70
71. 71
72. 72
73. 73
74. 74
75. 75
76. 76
77. 77
78. 78
79. 79
80. 80
81. 81
82. 82
83. 83
84. 84
85. 85
86. 86
87. 87
88. 88
89. 89
90. 90
91. 91
92. 92
93. 93
94. 94
95. 95
96. 96
97. 97
98. 98
99. 99
100. 100
101. 101
102. 102
103. 103
104. 104
105. 105
106. 106
107. 107
108. 108
109. 109
110. 110
111. 111
112. 112
113. 113
114. 114
115. 115
116. 116
117. 117
118. 118
119. 119
120. 120
121. 121
122. 122
123. 123
124. 124
125. 125
126. 126
127. 127
128. 128
129. 129
130. 130
131. 131
132. 132
133. 133
134. 134
135. 135
136. 136
137. 137
138. 138
139. 139
140. 140
141. 141
142. 142
143. 143
144. 144
145. 145
146. 146
147. 147
148. 148
149. 149
150. 150
151. 151
152. 152
153. 153
154. 154
155. 155
156. 156
157. 157
158. 158
159. 159
160. 160
161. 161
162. 162
163. 163
164. 164
165. 165
166. 166
167. 167
168. 168
169. 169
170. 170
171. 171
172. 172
173. 173
174. 174
175. 175
176. 176
177. 177
178. 178
179. 179
180. 180
181. 181
182. 182
183. 183
184. 184
185. 185
186. 186
187. 187
188. 188
189. 189
190. 190
191. 191
192. 192
193. 193
194. 194
195. 195
196. 196
197. 197
198. 198
199. 199
200. 200
201. 201
202. 202
203. 203
204. 204
205. 205
206. 206
207. 207
208. 208
209. 209
210. 210
211. 211
212. 212
213. 213
214. 214
215. 215
216. 216
217. 217
218. 218
219. 219
220. 220
221. 221
222. 222
223. 223
224. 224
225. 225
226. 226

Home