AG SPRAY ACCESSORIES Nylon Pressure Regulator Maximum corrosion resistance. ! Male inlet/female outlet ! 120°F temperature ! 4 oz weight ! Built to handle up to 15 GPM ! Stainless-steel spring Part No. 8.712-555.0 8.712-552.0 8.712-556.0 Old No 462212 462202 462213 Inlet 1/2" 3/4" 3/4" Outlet 3/4" 3/4" 3/4" ! Positive Viton seal prevents leakage and provides the best chemical resistance ! Knurled locknut for ease of locking in adjustment ! Tee-handle adjustment screw ! Choice of 1/2" or 3/4" inlet/outlet Adjustable Pressure Range 0-250 PSI 0-250 PSI 0-400 PSI Bulkhead Fittings Diaphragm Check Valves – Nylon For drip-free spraying. ! Black polypropylene ! Double-threaded with EPDM gasket ! Opening same size as outside diameter Part No 8.705-336.0 8.705-338.0 8.705-144.0 8.705-145.0 8.705-339.0 8.705-341.0 8.705-342.0 8.705-146.0 8.705-147.0 8.705-343.0 Gaskets for Above 8.705-337.0 8.705-340.0 8.705-344.0 Old No 141232 141234 140430 140432 141236 141238 141240 140434 140436 141242 141233 141237 141243 FPT 1/2" 3/4" 3/4" 1" 1" 1-1/4" 1-1/2" 1-1/2" 2" 2" Fits 1/2", 3/4" Fits 1", 1-1/4", 1-1/2" Fits 2" Hole Dia 1-5/8" 1-5/8" 1-3/4" 1-3/4" 2-1/2" 2-1/2" 2-1/2" 3" 3" 3-1/8" Twin-Diaphragm Spot Spray Pump Brass Bulkhead / Tank Fittings ! Use to drain or remove liquids from tanks, drums, etc. ! Heavy-duty brass ! Includes nut and aluminum grip washer Part No. 8.705-139.0 8.705-140.0 8.705-141.0 9.802-149.0 9.802-150.0 Old No 140417 140419 140420 140421 140422 Overall Length Mounting Hole Dia 1/8" x 1.5" 1/4" x .94" 1/4" x 1.5" 3/8" x 1.3" 1/2" x 1.5" NOTE: Installation requires access to inside of tank. 5/8" 3/4" 3/4" 1" 1-1/8" ! 1 GPM (open) ! 35 PSI (#8 tip) ! 3/8" hose barb inlet/outlet ! Self-priming to 2.5 feet ! Operating temperature 40°-110°F ! Liquid temperature 110°F max ! 5 Amp fuse ! 1.3 lbs. dry weight ! Compact automatic on-demand operation ! Sealed pressure switch automatically stops pump when discharge valve opens and closes ! Self-priming so pump can be located above supply tank ! Can run dry for extended periods without damage ! Built-in thermal protection on 12V DC motor ! Low-Amp draw ( 2.5 @ 25 PSI, 4.0 @ 35 PSI) ! Chemical-resistant valves and diaphragm Part No. Flow 8.702-326.0 Old No 100880 Description Open Spot Spray Pump, Max 35 PSI, 12 V DC 1.0 ! 125 PSI ! 2 GPM ! 10 PSI opening pressure ! Nylon body, polypropylene end cap – EPDM – diaphragm ! 1/4" MPT inlet, 11/16" — 16 male outlet nozzle thread ! Spring-backed diaphragm for positive action Part No 8.709-377.0 Old No 310851 Description Diaphragm Check Valves ! DO NOT USE … Polypropylene for: gasoline, nitric acid, trichlorethylene, toluene, ar o mat ic hydrocarbons or ker o sene. Polypropylene “P” — black/ glass reinforced. ! DO NOT USE … Nylon for: hydrochloric acid, chlo rine, fluorine, nitric, xylene or phosphoric or sulfuric acids. Nylon 6/6 “N” white/-tural color. Page 193
195 Publizr Home