NOZZLES HL250 High/Low Variable Angle Nozzle Push/Pull for easy change between high- and low-pressure; simple twist to adjust 0°-80° spray fan pattern. ! Stainless-steel replaceable orifice ! Durable glass-filled nylon cover ! 200° ! 4000 PSI ! 1/4" FPT inlet !Weight: .4 lbs Part No 8.710-972.0 8.710-973.0 8.710-974.0 8.710-975.0 8.710-976.0 8.710-977.0 8.710-978.0 8.710-979.0 8.710-980.0 8.710-982.0 8.710-983.0 Old No 374086 374087 374088 374090 374091 374092 374093 374094 374095 374097 374098 Color Lt Green Pink White Brown Dk Yellow Blue Purple Dark Red Dk Green Orange Silver Orifice 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 Rollover Nozzle – Twist-Type Holds two meg nozzles on opposite sides for positive change from chemical application to high-pressure rinse. ! Nickel-plated brass body ! 180°F max temperature ! 1000 PSI max pressure Part No 8.710-893.0 8.900-022.0 Old No 373054 075020X Adjustable Nozzle Compact, full-feature unit weighs only 4.3 oz, same functions as ST-51N. ! 3600 PSI max pressure ! 10 GPM max flow ! 300°F max temperature Part No 8.710-891.0 Double Nozzle Head ! Durable machined-brass body ! Stainless-steel ball ! Chemical-resistant ! 3600 PSI max pressure ! 300°F max temperature ! Up to 10 GPM flow for low side pressure at 250 PSI Part No 8.710-897.0 Old No 373058A ! Heavy nickel-plate ! 1/4" female inlet, two female outlets ! New ball guide and seat Description Double Nozzle Head Old No 373051P ! Machined-brass body ! Nylon adjustment knob ! 1/4" FPT inlet/outlet Description Adjustable Nozzle Description Dual 1/4" FPT in/out Repair Kit Steam Nozzle ! One-piece brass ! 1450 PSI ! Steam nozzle – 1/4" F ! Steam blank – 3/8" M Part No 8.710-958.0 8.710-957.0 8.904-374.0 8.712-415.0 ST-51N Adjustable Nozzle Nozzle holder allows water to be diverted around the fixed orifice nozzle, dropping the pressure and allowing the chemical injector to operate. ! Attaches to 1/4" MPT lance ! Accepts 1/4" meg nozzles ! 8.0 GPM max flow ! 300°F max temperature Part No 8.710-889.0 Old No 373051 ! 3600 PSI max pressure ! 5.9 oz weight Slip-on Nozzle Protector A durable, easy-to-use nozzle protector. Plastic rubber compound — flexible and tough! Description ST-51N ! 1-1/2" diameter at flare-end ! Slip-fits standard lances ! 2-1/2" long ! Only 1.2 oz! ! Slip-on to Lance ! At tach noz zle coupler and noz zle Part No 8.710-868.0 Variable Angle Nozzle ! One-piece brass ! 1450 PSI Part No 8.710-971.0 Old No 373006 ! Slide pro tec tor for ward for complete nozzle protection Old No 373710 373702 373705 Steam Nozzle Blank Description Flat Steam Nozzle, 1.5mm Steam Nozzle Blank – Drill to Size Nozzle Blank, Drilled to 1.6mm Steam Nozzle, Drilled to 5/64" Flat Steam Nozzle Description Slip-on Nozzle Protector ! Steam nozzle – 1/4" F ! Steam blank – 3/8" M Description Variable Angle Nozzle Page 89
91 Publizr Home