AG SPRAY ACCESSORIES Flojet Diaphragm Pump Built-in pressure switch automatically starts and stops pump instantaneously. ! Can run dry without damage ! Excellent self-priming capability ! Low-current draw Part No. 8.702-325.0 8.702-328.0 8.702-312.0 8.702-337.0 8.702-331.0 8.702-329.0 Old No 100879 100884 100863 100895 100888 100884A Flojet Model No. 2135-561 4300-142A 2100-032 2100-022A 4300-042 4300-043A * B = Buna V = Viton E= EPDM S = Santoprene NOTE: These units are designed to withstand many harsh chemicals. However, because compounds and concentrations of materials pumped through these units are beyond the manufacturer’s control, the manufacturer DOES NOT PROVIDE A WARRANTY on the wet-end of the pump. 12V DC 12V DC 115V 115V 115V 115V Power Max Flow Max PSI 1.48 3.30 1.85 1.85 3.70 4.70 60 40 50 50 35 35 3/8" FPT 1/2" Barb 3/8" FPT 3/8" FPT 1/2" Barb 1/2" Barb Ports B S S V S S Diaphragm* Valves* V E S V E E Diaphragm Pump Units 1.00-3.8 GPM integrated pump motor units. Powered by 12V DC or 115V AC power. Pumps are standard with Santoprene diaphragms and Viton valves for excellent service with a wide variety of sprayable products. NOTE: Flow is reduced as pressure is increased (i.e. 100850 pumps 1.12 GPM @ 60 PSI) Automatic demand control on/off. ! Chemical-resistant materials ! Can run dry without damage Part No. 8.702-294.0 8.702-304.0 8.702-300.0 8.702-296.0 8.702-335.0 8.702-302.0 8.702-311.0 8.702-307.0 8.702-306.0 8.702-334.0 8.702-308.0 8.702-338.0 Old No 100841 100854 100850 100844 100893 100852 100862 100857 100856 100892 100858 100896 8.702-303.0 8.702-301.0 8.702-310.0 100855 100853 100851 100861 ! Self-priming ! Low-Amp draw Shurflo Model No. 8000-541-236 8000-343-236 8000-543-236 8000-543-238 8030-813-239 8002-793-238 8000-532-256 8000-033-236 8000-533-236 8000-812-288 8000-813-238 8000-713-238 2088-343-135 2088-313-145 2088-712-244 2088-394-154 ! Automatic demand pressure switch or internal bypass Power Max Flow Max PSI Demand 12V DC Demand 12V DC Demand 12V DC Demand 12V DC Demand 12V DC Demand 12V DC Demand 115V Demand 115V Demand 115V 115V Bypass Demand 115V Demand 115V 2088 Premium Series – self-primes up to 12 foot – Built-in Back Check 8.702-305.0 Demand 12V DC Demand 12V DC Demand 12V DC Demand 115V 4111 – Double Head 8.702-339.0 166 – Air Drive 8.702-317.0 8.702-318.0 100899 100870 100871 *S = Santoprene V = Viton E= EPDM NOTE: These units are designed to withstand many harsh chemicals. However, because compounds and concentrations of materials pumped through these units are beyond the manufacturer’s control, the manufacturer DOES NOT PROVIDE A WARRANTY on the wet-end of the pump. 4111-035 166-200-56 166-200-36 Demand 12V Demand AIR Demand AIR 1.0 1.2 1.8 1.4 1.5 1.7 1.0 1.0 1.4 1.4 1.6 1.6 3.0 3.6 3.8 3.2 7.0 2.0 2.0 Ports 60 60 60 100 150 100 60 60 60 100 100 100 50 50 50 40 50 60 60 Diaphragm* 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 1/2"-14M 1/2"-14M 1/2"-14M 1/2"-14M 1/2"-14M 3/8" Barb 3/8" Barb Valves* S V S S S S S V S S S S S S S S S E V ® V V V V V E V V V V V E V V E V V E V Page 190
192 Publizr Home