PUMPS & PUMP KITS Complete Pump Extraction Kit ! 13mm, 15mm, 18mm, 20mm, 22mm and 24mm sockets ! 13mm-24mm in a carrying case ! Slide hammer Part No 8.723-619.0 Description Extraction Kit Geared Reduction Specifically designed for Legacy and Admiral pumps. ! Engine-to-pump drive units ! 2.1 to 1 reduction ratio (3,675 Eng. RPM=1,750 Pump RPM) ! Engine shaft size = 0.984" or 1" or 1-1/8" Geared Reduction Units Interpump / General For use with 1,450 RPM Interpump, General Pumps and Admiral A-W99. RS99: 2.4:1 Gear Reduction (3,480 engine RP M = 1,450 RPM Pump) For 3-5 HP Briggs, Honda-Tecumseh-Kohler with 3/4" shaft RS151: 2.2:1 Gear Reduction (3,190 engine RPM = 1,450 RPM pump) For 7-18 HP Briggs, Honda engines with 1" or 1-1/8" shaft (must specify) Use with the appropriate size: “WS” series Interpump, “TS” series General pump ! Eliminates belts, pulleys and belt guards ! Engine-to-pump drive units ! Improve efficiency Part No RS-99 Part No 8.710-332.0 8.710-333.0 8.710-334.0 8.715.344.0 8.715-342.0 8.749-925.0 8.749-922.0 8.749-923.0 8.749-336.0 8.754-767.0 Old No 349120 349121 349122 Description 24mm Pump x 1" Engine 30mm Pump x 1" Engine 30mm Pump x 1-1/8" Engine 25mm Pump x 1" Engine 24mm Pump x 1" Engine 24mm Pump x 0.984" Engine 24mm Pump x 3/4" Engine 24mm Pump x 1" Engine 24mm Pump x 1-1/8" Engine 25mm Pump x 1-1/8" Engine Geared Reduction Fits Admiral, Interpump, AR, Comet, Udor, and Hawk. ! Engine-to-pump drive units ! 2.18 to 1 reducer ! For 11-18 HP gasoline engine ! For pumps with a 24mm shaft Part No 8.710-335.0 8.710-336.0 Old No 349130 349131 Description 1" Engine Shaft 1-1/8" Engine Shaft ! 2 GPM max Anti-Seize Compound Recommended for all metal-to-metal, power-drive assemblies. Facilitates removal after use. ! Copper-graphite or nickel ! Copper-graphite high-torque for high temperature to 1800°F ! Nickel continues to work up to 2400°F ! Stops rust, galling and seizure on pulley / shaft or gear / shaft interfaces Part No 8.704-638.0 8.704-641.0 Old No 112299 112305 Description Blister Pack (1 appl) Copper – Graphite 8 oz Brush Top Can – Nickel Page 114 Part No 8.715-240.0 8.707-369.0 8.707-370.0 8.700-187.0 Old No 830065 753170 753168 753169 ! 1000 PSI max Description Pump-Sport 500 Crankshaft Seal Kit w/ plunger Check Valve Kit 8.710-321.0 RS-151 8.710-322.0 8.710-324.0 Old No 349009 349011 349013 Engine Shaft 3/4" 1" 1-1/8" 8.710-322.0 PTO Geared Multiplier ! 1 to 1.9 speed multiplier ! 1-3/8" splined shaft (same shaft as standard tractor PTO) ! 540 RPM PTO speed multiplied to 1,026 RPM at pump shaft ! For pumps with a 24mm shaft Part No 8.710-319.0 Old No 349005 Pumptech Pump The Pumptech Pump is a Twin plunger design Originally used on the HOTSY Model Sport 500. 8.710-321.0 Description Gear Multiplier
116 Publizr Home