BURNERS Oil Burners Part No 8.709-317.0 8.709-318.0 8.709-319.0* Old No 307000 307003 307007 Description 115V AC Burner w/ Oil Valve 230V AC Burner w/ Oil Valve 12V DC Burner w/ Oil Valve *Prop er operation requires an engine with 16+ Amp alternator and deep-cycle battery on nightly,overnight recharge 115V and 220V Wayne Burner Chart ! 75 to 3 GPH firing rates ! Solid-state ignition (low Amp) ! High-volume 6-1/4" blower on 220V unit, 5-3/16" blower on 110V unit ! 3,450 RPM pump/blower motor 115V Wayne Burner Chart Part No 8.709-317.0 Ignitor 8.700-802.0 / 079111 Fuel Pump 8.700-749.0 / 079030 220V Wayne Burner Chart Part No 8.709-318.0 Ignitor N/A / N/A Fuel Pump 8.700-749.0 / 079030 Description Wayve 220V Transformer 8.700-809.0 / 079123 Solenoid Valve 8.700-780.0 / 079063 Motor 8.701-094.0 / 079611 Blower Wheel 8.700-731.0 / 079006 Electrode Assembly Tune Up Kit 8.700-770.0 / 079052 Description Wayve 115V Transformer 8.700-804.0 / 079115 Solenoid Valve 8.700-779.0 / 079030 Motor 8.701-095.0 / 079612 Blower Wheel 8.700-730.0 / 079005 Electrode Assembly Tune Up Kit 8.700-770.0 / 079052 ! “A”-type Suntec fuel pump ! 3-3/4" air tube with adjustable flange for maximum versatility ! UL-recognized 8.700-774.0 / 079056 8.700-774.0 / 079056 NOTE: 8.700-721.0 – Coupling for 8.700-740.0 FASCO motor used on MET to FASCO converted burner 8.700-720.0 – Adaptor Bushing to allow MET blower wheel to work with FASCO motor 8.700-740.0 – Conversion Kit — Use MET to FASCO conversion kit if 12V burner motor cannot be identified. The kit contains the following parts: 8.700-739.0 Motor; 8.700-720.0 Adaptor bushing; 8.700-682.0 Adaptor Plate; 8.700-721.0 Coupling; 8.700-691.0 Screws (2); 8.700-104.0 Nuts 12V Wayne Burner Chart ! 12V solid-state ignitor Part No 8.709-319.0 Ignitor 8.700-807.0 / 079120 ! 3,450 RPM fuel pump Description Wayve 12V Transformer N/A / N/A Motor 8.700-739.0-FASCO / 079021 8.750-715.0-MET to FASCO 079021X Blower Wheel 8.700-727.0 / (079003) FASCO - 2.44" W x 2.53" T, 5/16" shaft, 8.700-728.0 (079003A), MET 3.44" W x 4.25" T Electrode Assembly 8.700-770.0 / 079052 Tune Up Kit 8.700-774.0 / 079056 with 8.700-721.0 coupling for converting from MET to FASCO NOTE: 8.700-721.0 – Coupling for 8.700-740.0 FASCO motor used on MET to FASCO converted burner 8.700-720.0 – Adaptor Bushing to allow MET blower wheel to work with FASCO motor 8.700-740.0 – Conversion Kit — Use MET to FASCO conversion kit if 12V burner motor cannot be identified. The kit contains the following parts: 8.700-739.0 Motor; 8.700-720.0 Adaptor bushing; 8.700-682.0 Adaptor Plate; 8.700-721.0 Coupling; 8.700-691.0 Screws (2); 8.700-104.0 Nuts Page 144 ! .5 to 2.75 GPH capacity with oil valve
146 Publizr Home