NOZZLES Tip-Jet Nozzle System – Tips and Components “Tip-Jet” Nozzle Systems are versatile nozzling systems for everyday or specialized applications. Flat spray, full cone, hollow cone and solid stream patterns, metering orifices and at om iz ing tips are all avail able in the Tip-Jet system. Capacities range from .55 to 20 GPM. Tip-Jet Tips ! Neat and simple tip change ! Hardened stainless-steel tips with vanes for maximum spray integrity ! Strainers available ! Body components available in brass, zinc-plated steel or stainless-steel ! Rated to 4000 PSI Orifice 3.0 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 9.0 10.0 0° Part No 8.708-016.0 8.708-019.0 8.708-023.0 8.708-027.0 8.708-031.0 8.708-035.0 8.708-039.0 8.708-042.0 8.708-046.0 8.708-050.0 8.708-054.0 8.708-058.0 Old No 253316 253330 253338 253346 253355 253365 253375 253383 253392 253400 253415 253456 Tip-Jet Nozzle Bodies, MPT inlet con nec tions in 1/4", 3/8" and 1/2" sizes. All outlet con nec tions are 11/16" — 16 male thread to fit Tip-Jet tip retainers and adapters. Part No Tip-Jet Nozzle Bodies 8.707-886.0 8.707-898.0 8.707-899.0 8.707-916.0 Old No 252511 252640B 252642 252861P Material, MPT-1/4" Nylon Brass Stainless-steel Polypropylene Tip-Jet Adapter Caps, similar to tip re tain ers, but have FPT connections for in-line applications. Part No Tip-Jet Adapter Caps 8.707-919.0 8.707-921.0 8.707-922.0 Old No 252878B 252880B 252881 Material, MPT Brass, 1/8" Brass, 1/4" Stainless-Steel, 1/4" Tip-Jet Strainers Soft-Edge and Hard-Edge Nozzle Protector Ideal for protecting sensitive surfaces against damage. Hard plastic body is stable enough to tightly hold nozzle adapter for heavy-duty use. ! 1/4" FPT inlet/outlet ! 300° F Part No 8.723-668.0 8.723-669.0 Description ST-10 Zinc-plated Nozzle Adapter ST-10 Stainless-steel Adapter Rosebud Nozzle Guard Molded rubber guard fits tightly around the nozzle to protect the nozzle and painted surfaces. ! 1/8" meg Part No 8.710-870.0 Page 83 Old No 373012 Description Nozzle Guard 15° Part No Old No 25° Part No Old No 8.708-017.0 253317N 8.708-018.0 253318 8.708-020.0 253331 8.708-024.0 253339 8.708-028.0 253348 8.708-032.0 253357 8.708-036.0 253367 – – 8.708-043.0 253385 8.708-047.0 253393 8.708-051.0 253401 8.708-055.0 253416 8.708-059.0 253457 40° Part No Old No – – 8.708-021.0 253332 8.708-025.0 253340 8.708-029.0 253349 8.708-033.0 253358 8.708-037.0 253368 8.708-040.0 253377 8.708-044.0 253386 8.708-048.0 253394 8.708-052.0 253402 8.708-056.0 253417 8.708-060.0 253458 8.708-022.0 253333 8.708-026.0 253341 8.708-030.0 253350 8.708-034.0 253359 8.708-038.0 253369 8.708-041.0 253378 8.708-045.0 253387 8.708-049.0 253395 8.708-053.0 253403 8.708-057.0 253418 8.708-061.0 253459 Tip-Jet Retainer Caps, fits all Tip-Jet nozzle bodies, holds spray tips and me ter ing or i fic es firmly in place. Tip-Jet Retainer Caps Part No 8.707-915.0 8.707-918.0 8.707-888.0 Old No 252858B 252875 252565 Material, MPT Brass, Hex Plated Steel, Hex Stainless-Steel, Hex Tip Retainer 18 mm thread, fits vent grip lance. See tip jet nozzles in nozzle section. Part No 8.710-901.0 Old No 373065 Description Tip Retainer Tip-Jet Strainers fit into nozzle body cavity to stop nozzle clogging. Brass with stainless-steel mesh. Part No 8.707-894.0 8.707-895.0 8.707-896.0 Old No 252627 252629 252631 Material, MPT 50-Mesh 100-Mesh 200-Mesh Soap Nozzles “Black” Soap Nozzles, are brass with a large #40 orifice. Ideal for low-pressure chemical applications. Part No 8.708-478.0 8.708-479.0 Old No 255905B 255920B Size 40 40 Nozzle Degree 25° 65°
85 Publizr Home