Table of Contents VIPER NOZZLES Page Viper2.0 Spartan Constant ................................................. 4-5 Viper2.0 Blue Devil Select.................................................. 6-7 Viper2.0 Tips ...................................................................... 8 Viper2.0 shutoffs ................................................................ 9 Select Gallonage ............................................................... 10 Constant Gallonage ........................................................... 11 Automatic ........................................................................... 12 Industrial ............................................................................ 13 FOAM EQUIPMENT Viper Eductors and Foam Nozzles ..................................... 14 Foam Gun Proportioner ..................................................... 15 NOZZLES and SHUTOFFS Piercing Nozzle .................................................................. 16 Small Dual Range and Constant Flow Tips ........................ 17 Smooth Bores and Stacked Tips ........................................ 18 Viper Shutoffs .................................................................... 19-21 Smooth Bore Combos & CAFS .......................................... 22 Combo “Break-Apart” Nozzles ........................................... 23-24 FORESTRY PRODUCTS Wildland Equipment ........................................................... 25 Hose Coilers ...................................................................... 26 GENFO Water Backpack ................................................... 27 Drip Torch .......................................................................... 28 High-Viz™ (High Visibility Products) ................................. 29 WATERFLOW ACCESSORIES Wye Valves ........................................................................ 30 Hydrant Accessories ......................................................... 31 Brass Ball Valves/Strainers ............................................... 32 Adapters & Reducers & Caps ............................................ 33 Repair Parts C&S Repair Parts .............................................................. 34 VIPER Repair Parts ........................................................... 35-36 TECHNICAL DATA Flow Data .......................................................................... 37-38 Cross Reference ................................................................ 39-40 Viper Valve Diagram/Maintenance .................................... 41-42 **Nozzle Selling Basics** ................................................... 43-44 Ordering and Warranty ...................................................... 47 888-663-4966
2020 Featured Products Save Water with Low Flow Professional Nozzles & Valves Peace of mind [pees uh v maynd] Noun. A mental state of calmness, a freedom from worry and anxiety. Peace of mind comes standard on all C & S Supply products. Homeowners and firefighters know that all C & S Supply products meet the same rigorous standards. Our products may cost a little more than the “other guys” but how much is your peace of mind worth? What do you do when you get a pre-evacuation notice? Grab your C&S supply Home Defense kit, of course! Just hook it up to your GARDEN HOSE to start flowing Class A foam. DEFEND YOUR SPACE...BE SAFE! SB-FGP6-75HD The 3/4” GARDEN HOSE Home Defense foam kit with lever shutoff, 6” foam gun, 2 hard cartridge foam sticks, and 3/16” smooth bore nozzle. Simply cut a 12” Cartridge in half to insert it into the foam gun. Each kit comes with enough foam to treat 800 gallons of water. COMBO consists of: • SBV75R - 3/4” GARDEN HOSE Shutoff • AD75GHT1NP - 3/4” garden hose to 1” adapter • FGP6-1 - 1” Foam Gun Proportioner • 1 ST BR 3/16” - 1” Smooth bore Nozzle tip 6 - 9 GPM • FCA-02 - 2 X 12” Class “A” Foam Cartridges Wt: 4.2 lbs. Length: 25” MORE FOAM GUN SIZES ON PAGE 23 105 • 5 GPM Constant Flow • 1” NST or NPSH 105 GHT • 5 GPM Constant Flow • 3/4” GARDEN HOSE MORE NOZZLE TIP OPTIONS ON PAGE 17 SBV75R • Brass GARDEN HOSE shutoff • Light-weight and durable • Lever handle powder coated red • Smooth 5/8” waterway with front and rear seals • 3/4" GHT Rigid Fe. x 3/4" GHT M. Wt: 0.5 lbs. Length: 2” 105BL • 5 GPM Constant Flow • 1” NST or NPSH 105BL GHT • 5 GPM Constant Flow • 3/4” GARDEN HOSE Wt: 1 lb. Length: 4” MORE SHUTOFFS ON PAGES 9, 20, 21 CSsupplyinc.com
VIPER 2.0 - SPARTAN CONSTANT NFPA compliant, professional constant flow nozzles VS25 • Constant Flow- 30 GPM @ 100 psi (Standard) • Super compact light weight frame • 1” swivel inlet NST or NPSH threads • Specify flow and pressure when ordering Wt: 2.8 lbs. Length: 7.75" Width: 3.4” Available Flow Configurations VS25 100 psi 75 psi 50 psi 15GPM 30GPM 40GPM 50GPM 75GPM ● ● N/A ● ● ● ● ● ● ● ● ● ● N/A N/A Features and Specifications: • NFPA 1964 compliant (EN 15182-4 TYPE 3 certified) • Light weight and Compact Design—fits slim compartments • Dual seal and dual drive ball shutoff for longer life and higher pressures • Rylostatic teeth for superior patterns available • Light weight but full metal construction • Hard-coated for corrosion protection and durability • Constant flow through fog and straight stream • BIMATIC flush system allows flush without shutting down • Pistol Grip is comfortable and durable VS95 • Constant Flow– 95 GPM @ 100 psi (Standard) • 1.5” swivel inlet NST or NPSH threads • Specify flow and pressure when ordering Wt: 4 lbs. VS25 100 psi 75 psi 50 psi Length: 9.84" Available Flow Configurations 50GPM 60GPM 75GPM 95GPM 125GPM ● ● ● ● ● ● ● ● ● ● ● ● ● N/A N/A 888-663-4966
VIPER 2.0 - SPARTAN CONSTANT NFPA compliant, professional constant flow nozzles VS150 • Constant Flow– 200 GPM @ 100 psi (Standard) • 1.5” swivel inlet NST or NPSH threads • Specify flow and pressure when ordering Wt: 6.5 lbs. Length: 11.2" VS150 100 psi 75 psi 50 psi Available Flow Configurations 150 GPM 175 GPM 200 GPM ● ● ● ● ● N/A ● N/A N/A VS250 • Constant Flow– 200 GPM @ 100 psi (Standard) • 2.5” swivel inlet NST or NPSH threads • Specify flow and pressure when ordering Wt: 6.7lbs. Length: 12" Available Flow Configurations VS150 100 psi 75 psi 50 psi 150 GPM 175 GPM 200 GPM ● ● ● ● ● N/A ● N/A N/A VS300 • Constant Flow– 250 GPM @ 100 psi (Standard) • 2.5" swivel inlet NST threads ONLY Wt: 7.5 lbs. Length: 13" Available Flow Configurations VS300 100 psi 75 psi 50 psi 200 GPM 250 GPM 300 GPM 325 GPM ● ● ● ● ● ● ● ● N/A ● N/A N/A CSsupplyinc.com
VIPER 2.0- SELECT GALLONAGE NFPA complaint nozzles with select flows BD550 (replaced BDS752) 5-10-25-50 GPM @ 100 psi 1” Swivel BD1560 15-30-50-60 GPM @ 100 psi 1” Swivel Wt: 3.6 lbs. Length: 8.5" Wt: 3.6 lbs. Length: 8.5" Features and Specifications • NFPA 1964 compliant (EN 15182-4 TYPE 3 certified) • New 90 degree rotation from 30 degree fog to straight stream (one twist of the hand) • Raised lug indicators on the selector and fog barrels for easier pattern and flow identification • No teeth to break - Rylostatic teeth in the nozzle head to break up the water but not cause fingers in the stream like traditional fixed teeth • Metal ball with front and rear seals to work under higher pressures (max 580 psi) • Deeper ribs in selector ring for better grip • 4 or 5 setting selection ring without pattern change • FLUSH without shutting down • Constant flow through fog and straight stream • Standard operating pressure@ 100 psi (75 psi and 50 psi operating pressures available) • Swivel inlet 1” and 1.5” NST or NPSH threads. (2.5” threads NST ONLY) BD3012 30-60-95-125 GPM @ 100 psi 1.5” Swivel BD3015 30-60-95-125-150 GPM @ 100 psi 1.5” Swivel Wt: 4.2 lbs. Length: 9.88" Wt: 4.2 lbs. Length: 9.88" BD7515 75-100-125-150 GPM @ 100 psi 1.5” Swivel Wt: 4.2 lbs. Length: 9.88" 888-663-4966
VIPER 2.0 - SELECT GALLONAGE NFPA complaint nozzles with select flows BD9520(1.5) 95-125-150-200 GPM @ 100 psi 1.5” Swivel BD9520(2.5) 95-125-150-200 GPM @ 100 psi 2.5” Swivel Wt: 6.8 lbs. Length: 11" Wt: 7.8 lbs. Length: 12.75" Indicator Lugs Metal Ball Inlet Screen One turn of the hand from fog to straight stream Rylostatic Teeth BD12250(1.5) 125-150-200-250 GPM @ 100 psi 1.5” Swivel BD12250(2.5) 125-150-200-250 GPM @ 100 psi 2.5” Swivel Wt: 6.8lbs. Length: 11" Wt: 7.8 lbs. Length: 12.75" CSsupplyinc.com
VIPER 2.0 - Tips NFPA complaint, Tips for “Break-Apart” VS95TIP • Constant Flow– 95 GPM @ 100 psi (Standard) • 1.5” swivel inlet NST • Suggested Shutoff VBU95 VS150TIP • Constant Flow– 200 GPM @ 100 psi (Standard) • 1.5” swivel inlet NST • Suggested Shutoff VBU150 BD3015TIP • 30-60-95-125-150 GPM @ 100 psi • 1.5” swivel inlet NST • Suggested Shutoff VBU95 BD9520TIP • 95-125-150-200 GPM @ 100 psi • 1.5” swivel inlet NST • Suggested Shutoff VBU150 BD12250TIP • 125-150-200-250 GPM @ 100 psi • 1.5” swivel inlet NST • Suggested Shutoff VBU150 Add a VIPER 2.0 tip to any VBU shutoff to create a compact professional “Break-Apart” nozzle 888-663-4966 VS150TIP + VBU150-IB160
VIPER 2.0 - Ultra Bore Shutoffs Ultra-duty, Precision Shutoffs VBU25 • Amazing CAFS shutoff • Stainless ball & Dual Teflon seals • Smooth full 1” waterway • Full time swivel with removable screen • Max working pressure 580 psi • 1" Swivel Fe. NST or NPSH x 1” M. NST or NPSH Wt: 2.5 lbs. VBU95 • Amazing CAFS shutoff • Stainless ball & Dual Teflon seals • Smooth full 1” waterway • Full time swivel with removable screen • Max working pressure 580 psi • 1.5" Swivel Fe. NST or NPSH x 1.5” M. NST or NPSH Wt: 2.5 lbs. VBU150-IB160 • 7/8” Integrated smooth bore 160 GPM @ 50 psi VBU150-IB185 • 15/16” Integrated smooth bore 185 GPM @ 50psi VBU150-IB210 • 1” Integrated smooth bore 210 GPM @ 50 psi • Made of extruded E-Lite alloy and hard coated • Quality resin ball & Teflon seals • Smooth full 1-3/8” waterway • Full time swivel with removable screen • Comfortable pistol grip • 1.5" Swivel Fe. NST x 1.5” M. NST Wt: 3.2 lbs. VBU250-IB210 • 1” Integrated smooth bore 210 GPM @ 50 psi VBU250-IB265 • 1-1/8” Integrated smooth bore 265 GPM @ 50 psi • Made of extruded E-Lite alloy and hard coated • Quality resin ball & Teflon seals • Smooth full 1-3/8” waterway • Full time swivel with removable screen • Comfortable pistol grip • 2.5" Swivel Fe. NST x 1.5” M. NST Wt: 3.4 lbs. CSsupplyinc.com
VIPER - SELECT GALLONAGE High performance nozzles with select flows SG540 • MOP(5)-10-25-40 GPM @ 100 psi • 1" swivel inlet NST or NPSH threads Wt: 3.6 lbs. Length: 8.85" SG1560 • 15-30-50-60 GPM @ 100 psi • 1" swivel inlet NST or NPSH threads Wt: 3.6 lbs. Length: 8.85" SG3012 • 30-60-95-125 GPM @ 100 psi • 1.5" swivel inlet NST or NPSH threads Wt: 4.5 lbs. Length: 8.85" SG7515 • 75-100-125-150 GPM @ 100 psi • 1.5" swivel inlet NST or NPSH threads Wt: 4.5 lbs. Length: 8.85" SG9520(1.5) • 95-125-150-200 GPM @ 100 psi • Swivel inlet 1.5” NST or NPSH threads Wt: 7 lbs. Length: 11.2" SG9520(2.5) • 95-125-150-200 GPM @ 100 psi • Swivel inlet 2.5” NST ONLY threads Wt: 7.5 lbs. Length: 12.8” SG12250(1.5) • 125-150-200-250 GPM @ 100 psi • Swivel inlet 1.5” NST or NPSH threads Wt: 7 lbs. Length: 11.2" SG12250(2.5) • 125-150-200-250 GPM @ 100 psi • Swivel inlet 2.5” NST ONLY threads Wt: 7.5 lbs. Length: 12.8” 888-663-4966 Features and Specifications: • Nozzles are extruded with E-LITE alloy • Hard-coated for corrosion protection and durability • The Spinning Teeth offer a wide, complete coverage fog pattern • Pistol Grip is standard on all Viper nozzles • Selection ring has 4 flow positions without pattern change • Viper Select Gallonage offers constant gallonage in all positions • FLUSH without shutting down • Low Pressure options of 75 or 50 psi available Custom Options: • Metal Handle • Colored Handles and Pistol Grips • Remove the pistol grip • Lower operating pressures available 50 psi or 75 psi • 1” and 1.5” available in both NST and NPSH • Tip only available to make “Break-Apart” nozzles • Tip only works great matched with our new integrated smooth bore shutoffs (Pgs. 9 &19)
VIPER - CONSTANT GALLONAGE Heavy-duty, professional constant flow nozzles CG1550 • Constant Flow- 30 GPM @ 100 psi (Standard) • 1” swivel inlet NST or NPSH threads Wt: 3.5 lbs. Length: 9.25" CG2510 • Constant Flow– 95 GPM @ 100 psi (Standard) • 1.5” swivel inlet NST or NPSH threads Wt: 4 lbs. Length: 9.84" CG5016 • Constant Flow– 125 GPM @ 100 psi (Standard) • 1.5” swivel inlet NST or NPSH threads Wt: 4 lbs. Length: 9.84" CG8020(1.5) • Constant Flow– 200 GPM @ 100 psi (Standard) • 1.5” swivel inlet NST or NPSH threads Wt: 6.5 lbs. Length: 11.2" CG8020(2.5) • Constant Flow– 200 GPM @ 100 psi (Standard) • 2.5" swivel inlet NST threads ONLY Wt: 7.5 lbs. Length: 13" VBPP-CG8020 (COMBO) • Constant Flow– 250 GPM @ 100 psi (Standard) • VBPP9520(2.5) + CG8020TIP • 2.5" swivel inlet NST threads ONLY Wt: 10 lbs. Length: 22" Features and Specifications: • Choose your flow at your operating pressure • Nozzles are extruded with E-LITE alloy • Hard-coated for corrosion protection and durability • Constant flow through fog and straight stream • BIMATIC flush system allows flush without shutting down • The Spinning Teeth offer a wide, complete coverage fog pattern • Pistol Grip is standard on all Viper nozzles CSsupplyinc.com Available Flow Configurations CG1550 100 psi 75 psi 50 psi 30GPM 40GPM ● ● N/A N/A N/A N/A Available Flow Configurations CG2510 100 psi 75 psi 50 psi 60 GPM 95 GPM ● ● ● ● ● ● Available Flow Configurations CG5016 100 psi 75 psi 50 psi 125 GPM 150GPM ● ● ● ● N/A N/A CG8020 Available Flow Configurations CG8020 150 GPM 175 GPM 200 GPM 250 GPM 100P psi 75 psi 50 psi ● ● ● ● ● ● ● ● ● ● N/A N/A
VIPER - AUTOMATIC GALLONAGE Automatic nozzles with modulated flows FT1550 • Flow Range – 15 to 50 GPM • 1 ” swivel inlet NST or NPSH threads • Wt: 4 lbs. Length: 9.25" FT2510 • Flow Range – 25 to 100 GPM • 1.5” swivel inlet NST or NPSH threads • Wt: 5 lbs. Length: 9.84" FT5016 • Flow Range – 50 to 160 GPM • 1.5” swivel inlet NST or NPSH threads • Wt: 5 lbs. Length: 9.84" FT8020(1.5) • Flow Range – 80 to 200 GPM • 1.5” swivel inlet NST or NPSH threads • Wt: 6.5 lbs. Length: 11.2" FT12250(1.5) • Flow Range – 125 to 250 GPM • 1.5” swivel inlet NST or NPSH threads • Wt: 6.5 lbs. Length: 11.2" FT8020(2.5) • Flow Range – 80 to 200 GPM • 2.5” swivel inlet NST ONLY • Wt: 7.5 lbs. Length: 13" FT12250(2.5) • Flow Range – 125 to 250 GPM • 2.5” swivel inlet NST ONLY • Wt: 7.5 lbs. Length: 13" Features and Specifications: • Internal spring modulates flow without sacrificing pattern • Nozzles are extruded with E-LITE alloy • Hard-coated for corrosion protection and durability • Constant flow through fog and straight stream • BIMATIC flush system allows flush without shutting down • The Spinning Teeth offer a wide, complete coverage fog pattern • Pistol Grip is standard on all Viper nozzles • Low Pressure options of 75 or 50 psi available 888-663-4966
VIPER - INDUSTRIAL NOZZLES Heavy-duty Utility nozzles at a great price! Features and Specifications: • Simple, durable, and can be used as a break-apart • Large protective rubber bumpers • Tip twists to shut off • Safe and durable (individually tested) • Shutoff handles available in colors to match pre-connect lines: Black, Red, Yellow, Orange, Blue, Green • Metal handles available for added durability ST1530-PV • 30 GPM @ 100 psi • Combination of VB1560+130 nozzle tip • 1” swivel NST or NPSH • Break-apart tip is 1” rigid base NST or NPSH • Wt: 3.5 lbs. Length: 9.45" VTE1550 • Composite Nozzle • 30 GPM Constant Flow • 1” NST or NPSH • Wt: 1 lb. Length: 5” ST2510-PV • 95 GPM @ 100 psi • Combination of VB3012+ST2510 nozzle tip • 1 1/2” swivel NST or NPSH • Break-apart tip is 1 1/2” rigid base NST Only • Wt: 3.5 lbs. Length: 10.6" ST5016-PV • 125 GPM @ 100 psi • Combination of VB3012+ST5016 nozzle tip • 1 1/2” swivel NST or NPSH • Break-apart tip is 1 1/2” rigid base NST Only • Wt: 3.5 lbs. Length: 10.6" ST2510-PV(2.5) • 95 GPM @ 100 psi • Combination of VB9520(2.5)+ST2510 nozzle • 2.5” swivel NST Only • Break-apart tip is 1.5” rigid base NST Only • Wt: 6.2 lbs. Length: 13.25” ST5016-PV(2.5) • 125 GPM @ 100 psi • Combination of VB9520(2.5)+ST5016 nozzle • 2.5” swivel NST Only • Break-apart tip is 1.5” rigid base NST Only • Wt: 6.2 lbs. Length: 13.25” VTE2510 • Composite Nozzle • 95 GPM Constant Flow • 1.5” NST or NPSH • Wt: 1 lb. Length: 5” Black Knight • Fiberglass Reinforced Composite • 95 GPM Constant Flow • 1.5” NST or NPSH • Wt: 1 lb. Length: 5” ST2510 TIP • 95 GPM Constant Flow • Spinning teeth • 1.5” NST • Wt: 1 lb. Length: 5” ST5016 TIP • 125 GPM Constant Flow • Spinning teeth • 1.5” NST • Wt: 1 lb. Length: 5” CSsupplyinc.com
PORTABLE FOAM EQUIPMENT Got Questions? www.CSSupplyinc.com/foam-101 BYPP1550-DIAL Foam Eductor with Water Bypass & Metering Dial • 30 GPM • 1" rigid thread NST BYPP3012-DIAL Foam Eductor with Water Bypass & Metering Dial • 60 GPM • 1.5" rigid thread NST BYPP7515-DIAL Foam Eductor with Water Bypass & Metering Dial • 95 GPM • 1.5" rigid thread NST BYPP9520-DIAL Foam Eductor with Water Bypass & Metering Dial • 125 GPM • 1.5" rigid thread NST PVB1560 • 30 GPM • 1" Swivel NST or NPSH • Expansion rate from 8:1 to 12:1 Wt: 3 lbs. Length: 15.5" PVB3012 • 60 GPM • 1.5" Swivel NST or NPSH • Expansion rate from 8:1 to 12:1 Wt: 3.5 lbs. Length: 19" PVB7515 • 95 GPM • 1.5" Swivel NST or NPSH • Expansion rate from 8:1 to 12:1 Wt: 3.5 lbs. Length: 19" CEP 1560 Foam tube designed to easily clamp on Viper SG1560, BD550 and BD1560 • Expansion rate from 8:1 to 12:1 Wt: 1 lb. Length: 12" CEP 3012 Foam tube designed to easily clamp on Viper SG, FT and CG nozzles • For: SG3012 / SG7515 / SG9520 - CG2510 / CG5016 / CG8020 - FT2510 / FT5016 / FT8020 • Expansion rate from 8:1 to 12:1 Wt: 2 lbs. Length: 16" 888-663-4966 Wt: 3 lbs. Length: 15.5"
Foam Gun Proportioner Maintenance free class A foam Need a shutoff and nozzle? See the combos on page 23 FGP12-1 • For 12” or smaller hard cartridge foam sticks • 1” Rigid Fe. X 1” M. NST or NPSH • Now includes 2 class “A” Foam Cartridges Wt: 2.2 lbs. Length: 15.5” FGP12-15 • For 12” or smaller hard cartridge foam sticks • 1.5” Rigid Fe. X 1.5” M. NST or NPSH • Now includes 2 class “A” Foam Cartridges Wt: 2.2 lbs. Length: 15.5” FGP6-1 • For 6” or smaller hard cartridge foam sticks • 1” Rigid Fe. X 1” M. NST or NPSH • Now includes 2 class “A” Foam Cartridges Wt: 1.6 lbs. Length: 9.25” FGP6-15 • For 6” or smaller hard cartridge foam sticks • 1.5” Rigid Fe. X 1.5” M. NST or NPSH • Now includes 2 class “A” Foam Cartridges Wt: 1.6 lbs. Length: 9.25” FCA-02 • 2 - 12” Class A foam cartridges Wt: 1.2 lbs. Length: 12” FCA-24 • Price per box if 1-9 boxes are purchased (See Price List) • 1 BOX of 24 - 12” Class A foam cartridges Wt: 14.4 lbs. Length: 12” FCA-240 • Price per box if 10+ boxes are purchased (See Price List) • 1 BOX of 24 - 12” Class A foam cartridges Wt: 14.4 lbs. Length: 12” CSsupplyinc.com
PIERCING NOZZLE PN-100 • Stainless steel construction • Removable penetrating tip for replacement • Durable strike plate to drive the nozzle through dense materials • Spray pattern from 60º forward to 10º backward for complete coverage • Recessed spray holes keeps debris out so the flow is not obstructed • 100 gpm @ 100 psi • 120 gpm @ 150 psi Swivel : 1.5” NST or NPSH Length: 41” PN-100-HOSE • 6’ Hose extension for PN-100 • 1.75” double jacket with 1.5” couplings Weight: 13 lbs. PN-100-TIP • Spray pattern from 60º forward to 10º backward for complete coverage • 100 gpm @ 100 psi • 120 gpm @ 150 psi PN-100-EXT • 3’ stainless steel extension for PN-100 Swivel : 1 1/2” NST Length: 6’ Weight: 3.2 lbs. Length: 10” Weight: 2.4 lbs. Length: 36” Weight: 10.4 lbs. PN-100-COMBO • PN100 + PN-100-HOSE + SBV15SS • COMBO increases maneuverability of the nozzle at a nice price. Swivel : 1.5” NST Length: 41” Weight: 17 lbs. 888-663-4966
SMALL NOZZLE TIPS Durable and Economical • All C&S Nozzle Tips can be combined with a C&S Shutoff valve to make a custom ‘Combo’ nozzle • C&S Nozzles are constructed of hard anodized aluminum and stainless steel components • Most come with a heavy duty rubber bumper for added protection (Exception: Bumperless models) • Flow from 5 GPM to 100 GPM • Ideal for firefighting and industrial uses 105/15BL • NEW LOWER FLOW! • 5 to 15 GPM Dual Flow • 1” NST or NPSH 110/23BL • 10 to 23 GPM Dual Flow • 1” NST or NPSH 110/23BL GHT • 10 to 23 GPM Dual Flow • 3/4” GHT Wt: 1 lb. Length: 4” 105/15 • NEW LOWER FLOW! • 5 to 15 GPM Dual Flow • 1” NST or NPSH 110/23 • 10 to 23 GPM Dual Flow • 1” NST or NPSH 110/23 GHT • 10 to 23 GPM Dual Flow • 3/4” GHT Wt: 1 lb. Length: 4” 1560/20 • 20 to 60 GPM Dual Flow • 1.5” NST or NPSH 1590/20 • 20 to 90 GPM Dual Flow • 1.5” NST or NPSH Wt: 1 lb. Length: 5” MADDDOG • Low/Medium expansion foam tube • Fits 105/15, 110/23, 1560/20, 1590/20, 115, 130, 1560, 15100, & VTE1550 Wt: 1 lb. Length: 4” CSsupplyinc.com 115BL • NEW LOWER FLOW! • 15 GPM Constant Flow • 1” NST or NPSH 130BL • 30 GPM Constant Flow • 1” NST or NPSH 130BL GHT • 30 GPM Constant Flow • 3/4” GHT Wt: 1 lb. Length: 4” 115 • NEW LOWER FLOW! • 15 GPM Constant Flow • 1” NST or NPSH 130 • 30 GPM Constant Flow • 1” NST or NPSH 130 GHT • 30 GPM Constant Flow • 3/4” GHT Wt: 1 lb. Length: 4” 1560 • 60 GPM Constant Flow • 1.5” NST or NPSH 15100 • 100 GPM Constant Flow • 1.5” NST or NPSH Wt: 1 lb. Length: 5” • Adjustable from fog to straight stream to off with twist shutoff • (Dual flow nozzles starting from the off position twist to Low Flow Straight Stream, to Low Flow Partial Fog, to High Flow Straight Stream to High Flow Fog)
SMOOTH BORES AND STACKED TIPS The standard in smooth bore nozzles 1” Smooth Bore features: • Constructed of anodized aluminum • Available in 1” NST and NPSH • 1” Straight Bores are best used with the VB1560 Shutoff Wt: 0.8 lbs. Length: 4” 1” ST BR 3/16" 3/16" Outlet Smooth Bore Nozzle 1” ST BR 1/4" 1/4" Outlet 1” ST BR 5/16" 3/8" Outlet 1” ST BR 3/8" 1” ST BR 1/2" 1” ST BR 5/8" 1” ST BR 3/4" 3/8" Outlet 1/2" Outlet 5/8" Outlet 3/4" Outlet 1 1/2” Smooth Bore features: • Constructed of anodized aluminum • Available in both NST and NPSH • 1 1/2” Straight Bores are best used with the VB9520 Shut-Off Wt: 0.8 lbs. Length: 5” ST BR 3/8" Smooth Bore Nozzle ST BR 1/2" Smooth Bore Nozzle ST BR 5/8" Smooth Bore Nozzle ST BR 3/4" Smooth Bore Nozzle ST BR 7/8" Smooth Bore Nozzle ST BR 15/16" Smooth Bore Nozzle ST BR 1" 1” ST BR 15/16" 15/16" Outlet Smooth Bore Nozzle 3/8" Outlet 1/2" Outlet 5/8" Outlet 3/4" Outlet 7/8" Outlet Smooth Bore Nozzle Smooth Bore Nozzle Smooth Bore Nozzle Smooth Bore Nozzle Smooth Bore Nozzle 15/16" Outlet Smooth Bore Nozzle 1" Outlet Smooth Bore Nozzle ST BR 1-1/16" 1 1/16" Outlet Smooth Bore Nozzle ST BR 1-1/8" ST BR 1-1/4" 1 1/8” Outlet Smooth Bore Nozzle 1 1/4” Outlet Smooth Bore Nozzle 1.5” Stacked Tip features: • Constructed of anodized aluminum • 1 1/2” NST and NPSH STT-2 15/16” and 1/2" Outlets • Dual Stacked Tip Wt: 1 lb. Length: 8” STT-1 1 1/4", 1 1/8", and 1" Outlets • Triple stacked tip Wt: 2 lbs. Length: 12” psi 3/16" 1/4" 40 50 60 80 100 WORKS BEST WITH: 6.5 7.5 8 9.3 10 11 13 14 SMOOTH BORE THEORETICAL FLOW DATA/ GPM 5/16” 18 20 22 25 29 16.6 18 VBU25 VBU25 VBU25 31 32 37 43 48 54 57 66 75 73 82 89 103 116 107 119 129 149 168 143 160 176 203 227 166 186 202 233 262 189 211 230 265 298 212 237 259 299 335 VBU25 VBU25 VBU25 VBU25 (CAFS) VBU25 (CAFS) VBU95 VBU95 VBU95 VBU95 VBU95 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB95202.5 VB95202.5 VB95202.5 VB95202.5 888-663-4966 VB95202.5 VB95202.5 VB95202.5 VB95202.5 VB95202.5 3/8" 1/2" 5/8" 3/4" 7/8" 15/16" 1" 1 1/16" 1 1/8" 1 1/4" 27 239 267 291 336 377 295 329 359 415 465
INTEGRATED SMOOTH BORE NOZZLES The new standard in smooth bore nozzles VB9520-ISB1(1.5) • 1” Smooth bore tip Integrated into the shutoff • Made of extruded E-Lite alloy and hard coated • Light-weight and durable • Quality polymer balls & seats and shutoff handles • Smooth full 1 3/8” waterway • 1.5" Swivel Fe. NST or NPSH x 1.5” M. NST Wt: 4 lbs. VB9520-ISB15/16(1.5) • 15/16” Smooth bore tip Integrated into the shutoff • Made of extruded E-Lite alloy and hard coated • Light-weight and durable • Quality polymer balls & seats and shutoff handles • Smooth full 1 3/8” waterway • 1.5" Swivel Fe. NST or NPSH x 1.5” M. NST Wt: 4 lbs. VB9520-ISB7/8(1.5) • 7/8” Smooth bore tip Integrated into the shutoff • Made of extruded E-Lite alloy and hard coated • Light-weight and durable • Quality polymer balls & seats and shutoff handles • Smooth full 1 3/8” waterway • 1.5" Swivel Fe. NST or NPSH x 1.5” M. NST Wt: 4 lbs. Add a nozzle tip to any VB9520-ISB to create a “Break-Apart” nozzle CG8020TIP-150LP50 + VB9520-ISB7/8(1.5) CSsupplyinc.com
BALL SHUTOFFS Economical, Lightweight, Easy to Operate VB1560 • Made of extruded E-Lite alloy and hard coated • Light-weight and durable • Quality polymer balls & seats and shutoff handles • Smooth full 1” waterway • Full time swivel • Comfortable pistol grip • 1" Swivel Fe. NST or NPSH x 1” M. NST or NPSH Wt: 2.5 lbs. VB3012 • Made of extruded E-Lite alloy and hard coated • Light-weight and durable • Quality polymer balls & seats and shutoff handles • Smooth full 1” waterway • Full time swivel • Comfortable pistol grip • 1.5" Swivel Fe. NST or NPSH x 1.5” M. NST or NPSH Wt: 2.5 lbs. VB9520 (1.5) • Made of extruded E-Lite alloy and hard coated • Light-weight and durable • Quality polymer balls & seats and shutoff handles • Smooth full 1-3/8” waterway • Full time swivel • Comfortable pistol grip • 1.5" Swivel Fe. NST or NPSH x 1.5” M. NST or NPSH Wt: 4 lbs. VB9520 (2.5) • Made of extruded E-Lite alloy and hard coated • Light-weight and durable • Quality polymer balls & seats and shutoff handles • Smooth full 1-3/8” waterway • Full time swivel • Comfortable pistol grip • 2.5" Swivel Fe. NST x 1.5” M. NST or NPSH Wt: 5 lbs. VBPP9520 (2.5) • Made of extruded E-Lite alloy and hard coated • Light-weight and durable • Quality polymer balls & seats and shutoff handles • Smooth full 1-3/8” waterway • Full time swivel • Wrap around playpipe handles • 2.5" Swivel Fe. NST x 1.5” M. NST Wt: 5 lbs. 888-663-4966 Also Available with metal handle VB9520-M 2.5” Also Available with metal handle VB9520-M 1.5” Also Available with metal handle VB3012-M Also Available with metal handle VB1560-M
BALL SHUTOFFS Economical, Lightweight, Easy to Operate SBV10SS-M • Made of hard coated Aluminum • Light-weight and durable • Quality polymer balls & seats • Cast aluminum shutoff handle • Smooth full 1” waterway • 1" Swivel Fe. NST or NPSH x 1” M. NST or NPSH Wt: 1.2 lbs. SBV10SS • Made of hard coated Aluminum • Light-weight and durable • Quality polymer balls & seats and shutoff handles • Smooth full 1” waterway • 1" Swivel Fe. NST or NPSH x 1” M. NST or NPSH Wt: 1 lb. SBV15SS-M • Made of hard coated Aluminum • Light-weight and durable • Quality polymer balls & seats • Cast aluminum shutoff handle • Smooth full 1” waterway • 1.5" Swivel Fe. NST or NPSH x 1.5” M. NST or NPSH Wt: 1.2 lbs. SBV15SS • Made of hard coated Aluminum • Light-weight and durable • Quality polymer balls & seats and shutoff handles • Smooth full 1” waterway • 1.5" Swivel Fe. NST or NPSH x 1.5” M. NST or NPSH Wt: 1.5 lbs. VB9520NPG (1.5) • Made of extruded E-Lite alloy and hard coated • Light-weight and durable • Quality polymer balls & seats and shutoff handles • Smooth full 1-3/8” waterway • 1.5" Swivel Fe. NST or NPSH x 1.5” M. NST or NPSH Wt: 4 lbs. VB9520NPG (2.5) • Made of extruded E-Lite alloy and hard coated • Light-weight and durable • Quality polymer balls & seats and shutoff handles • Smooth full 1-3/8” waterway • 2.5" Swivel Fe. NST x 1.5” M. NST or NPSH Wt: 5 lbs. CSsupplyinc.com
CAFS & SMOOTH BORE NOZZLES Quality COMPRESSED AIR FOAM solutions CAFS-VIP-10 The C&S 1" CAFS Nozzle is a combination of the VB1560 Ball shutoff with full 1" waterway with a choice of a C&S Supply 1” Smooth bore tip (3/16”,1/4”, 3/8”,1/2”, 5/8”, 3/4” or 15/16” outlet) Not using CAFS? This combo makes a great complete smooth bore nozzle. Both parts are constructed of hard coated aluminum. COMBO consists of: • 1 ST BR 15/16” (page 18) Note: Choice of outlet sizes above, w/ 1” base (comes standard with 15/16” outlet) • VB1560 ( page 20) • 1” Fe. Swivel Inlet NST or NPSH Wt: 2.8 lbs Length: 9.25” CAFS-VIP-15 The C&S 1.5" CAFS Nozzle is a combination of the VB9520 Ball shutoff with full 1 3/8" waterway with a choice of a C&S Supply 1 1/2" Smooth bore tip (3/4”, 15/16”, 1”, 11/16”, 1-1/8” outlet) Not using CAFS? This combo makes a great complete smooth bore nozzle. Both parts are constructed of hard coated aluminum. COMBO consists of: • ST BR 1-1/8” (page 18) Note: Choice of outlet sizes above, w/ 1.5” base (comes standard with 1-1/8” outlet) • VB9520(1.5) ( page 20) • 1.5” Fe. Swivel Inlet NST or NPSH Wt: 4.4 lbs. Length: 11” STBR-VIP-25 The C&S 2.5" Straight Bore Nozzle is a combination of the VB9520 2.5” Ball shutoff with full 1 3/8" waterway with a choice of a C&S Supply 1 1/2" Smooth bore tip (3/4”, 15/16”, 1”, 1-1/16”, 1-1/8” outlet) This combo makes a great complete smooth bore nozzle. Both parts are constructed of hard coated aluminum. COMBO consists of: • ST BR 1” (page 18) Note: Choice of outlet sizes above, w/ 1.5” base (comes standard with 1” outlet) • VB9520(2.5) ( page 20) • 2.5” Fe. Swivel Inlet NST Only Wt: 5.6 lbs. Length: 12.75” VBPP-STT1 The C&S Playpipe combo is a combination of the VBPP9520-2.5 Ball shutoff with full 1 3/8" waterway with a Triple Stack smooth bore nozzle with 1 1/4", 1 1/8", and 1" outlets. This combo makes a great complete 2.5” smooth bore nozzle. All parts are constructed of hard coated aluminum. COMBO consists of: • STT-1” (page 18) Note: Outlet sizes: 1 1/4", 1 1/8", and 1" w/ 1.5” NST base • VBPP9520(2.5) ( page 20) • 2.5” Fe. Swivel Inlet NST Only Wt: 7.2 lbs. Length: 22” 888-663-4966
COMBO “BREAK-APART” NOZZLES Maintenance Free Class A Foam SB-FGP6-1 1” High performance hard foam cartridge proportioner nozzle with pistol grip for 6” or smaller hard cartridge foam sticks. Cut a 12” Cartridge in half. The combo comes standard with the 110/23 (optional tips: 105/15, 115, or 130). For better foam, you can add a MADDDOG (pg. 17) COMBO consists of: • VB1560 - 1” Shutoff with pistol grip • FGP6-1 - 1” Foam Gun Proportioner • 110/23 - 1” Nozzle tip 10/23 GPM • FCA-02 - 2 X 12” Class “A” Foam Cartridges Wt: 5lbs. Length: 25” SB-FGP6-15 1.5” High performance hard foam cartridge proportioner nozzle with pistol grip for 6” or smaller hard cartridge foam sticks. Cut a 12” Cartridge in half. The combo comes standard with the 1560/20 (optional tips: 1590/20, 1560, or 15100). For better foam, you can add a MADDDOG (pg. 17) COMBO consists of: • VB3012 - 1.5” Shutoff with pistol grip • FGP12-15 - 1.5” Foam Gun Proportioner • 1560/20 - 1.5” Nozzle tip 20/60 GPM • FCA-02 - 2 X 12” Class “A” Foam Cartridges Wt: 5lbs. Length: 25” SB-FGP12-1 1” High performance hard foam cartridge proportioner nozzle with pistol grip for 12” or smaller hard cartridge foam sticks. The combo comes standard with the 110/23 (optional tips: 105/15, 115, or 130).For better foam, you can add a MADDDOG (pg. 17) COMBO consists of: • VB1560 - 1” Shutoff with pistol grip • FGP12-1 - 1” Foam Gun Proportioner • 110/23 - 1” Nozzle tip 10/23 GPM • FCA-02 - 2 X 12” Class “A” Foam Cartridges Wt: 5lbs. Length: 25” SB-FGP12-15 1.5” High performance hard foam cartridge proportioner nozzle with pistol grip for 12” or smaller hard cartridge foam sticks. The combo comes standard with the 1560/20 (optional tips: 1590/20, 1560, or 15100) For better foam, you can add a MADDDOG (pg. 17) COMBO consists of: • VB3012 - 1.5” Shutoff with pistol grip • FGP12-15 - 1.5” Foam Gun Proportioner • 1560/20 - 1.5” Nozzle tip 20/60 GPM • FCA-02 - 2 X 12” Class “A” Foam Cartridges Wt: 5lbs. Length: 25” CSsupplyinc.com
COMBO “BREAK-APART” NOZZLES SB-VIP-10 The C&S 1" Economy Special, “BREAK-APART” nozzle is a combination of the VB1560 Ball shutoff with full 1" waterway with a C&S Supply 1” Bumperless Dual Range nozzle which flows 10 and 23 GPM. Both parts are constructed of hard coated aluminum. COMBO consists of: • 110/23BL • VB1560 • 1” NST or NPSH Wt: 2.5 lbs. Length: 7.5” SB-VIP-15 The C&S 1.5" Economy Special, “BREAK-APART” nozzle is a combination of the VB3012 Ball shutoff with full 1" waterway with a choice of a C&S Supply 1 1/2" Small Dual range or Constant Flow Nozzle. The combo comes standard with the 1560/20 (optional tips: 1590/20, 1560, or 15100) Both parts are constructed of hard coated aluminum. COMBO consists of: • 1560/20 • VB3012 • 1.5” NST or NPSH Wt: 3.4 lbs. Length: 7.5” SB-VIP-10C The C&S 1" Economy Special, “BREAK-APART” nozzle is a combination of the VB1560 Ball shutoff with full 1" waterway with VTE1550 1” Constant flow nozzle which flows 30 GPM. The Valve is constructed of hard coated aluminum and the nozzle is Composite with brass internals. COMBO consists of: • VTE1550 • VB1560 • 1” NST or NPSH Wt: 2.0 lbs. Length: 7.5” SB-VIP-15C The C&S 1.5" Economy Special, “BREAK-APART” nozzle is a combination of the VB3012 Ball shutoff with full 1" waterway with a Viper BLACK KNIGHT 1 1/2" 95 GPM Constant Flow Nozzle. COMBO consists of: • BLACK KNIGHT • VB3012 • 1.5” NST or NPSH Wt: 3.0 lbs. Length: 7.5” 888-663-4966
WILDLAND EQUIPMENT TT300 • Valve has three positions: Lower Outlet, Upper Outlet, and Off • Outlets are 3/4” NH (Garden Hose Threads) • Standard tips are 3 GPM Fog and 3/16” straight Bore Tip • Other tip options are (Specify configuration): Fog tips: TT300 FOG TIP - 3 GPM (Standard) TT300 FOG TIP - 6 GPM TT300 FOG TIP - 15 GPM • 1" Fe. Rigid NST or NPSH Wt: 1.5 lbs. Length: 6" FLT130 • Compact Smooth bore nozzle with flat stream pan • 30GPM@100 psi fully open in smooth bore position • 20GPM@100 psi in flat stream position • 3/4” garden hose insert in a 1” Fe. NPSH Rigid Base Wt: 0.5 lbs. Length: 5" TV1510 The T-Valve is cast aluminum designed to help extend wildland fire fighting hose lays and to supply an additional 1" line for filling pump cans or mop-up use. Attaches to the new GENFO quick fill adapter GENFO45-QF (pg.27) • The 1" outlet is controlled by an internal valve with a handle • 1.5" Fe. x 1.5" M. x 1" M. Any combination of NST or NPSH (Specify Thread Combination) Wt: 1 lb. Length: 5" T-1 • No Valve • Includes cap and chain • 1" Fe. x 1" M. x 1" M. NST or NPSH Wt: .05 lbs. Length: 4" T-1.5 • No Valve • Includes cap and chain • 1.5" Fe. NST x 1.5" M. NST x 1" M. NPSH or • 1.5" Fe. NST x 1.5" M. NST x 1" M. NST Wt: .05 lbs. Length: 5" HC1510 • More rigid design with knuckle guard • Curved clamping area and clasp design for easy, secure operation • The wildland hose clamp is made of cast aluminum • Designed for use on single jacket fire hose up to 1.75" • It has a built-in spanner for use on fittings 2.5" and smaller Wt: 1.8 lbs. Length: 10.75" CSsupplyinc.com Straight bore tips: TT300 STRAIGHT TIP 3/16” (Standard) TT300 STRAIGHT TIP - 1/4” TT300 STRAIGHT TIP - 3/8”
HOSE COILERS Saving firefighters backs since 1996 MC40 & MC65 • Designed to make easy work out of coiling 1” to 3” hose under any condition • Folds up for small storage and easy transportation • Capable of Dutch rolls • Mounting bracket (MB) included • Trailer Hitch and Wildland Mounting Brackets available for more flexibility in where hose can be coiled, see below MC40 • Rolls 1”- 1 1/2” hose • MB mount included Wt: 6.5 lbs. MC65 • Rolls 1 1/2” to 3” hose • MB mount included Wt: 7 lbs. MB THMB MB MC80 • Designed to make easy work out of coiling 4” to 7” hose • Attaches to the Hitch Receiver of a pickup or the Tailboard of a truck • Comes with a Tailboard Mounting bracket (TB80) • Constructed of heavy gauge steel, for superb durability MC40 OR MC65 MC80 • Rolls 4” to 7” hose • Comes with both a TB80 and a TH80 mount included Wt: 10 lbs. MC80 TB80 • Additional Square Mount for the MC40 or MC65 Coilers. The Square Mount can be bolted to any Vertical surface Wt: 1 lb. • The THMB (Trailer Hitch Mounting Bracket) makes for quick field setup, use, and breakdown of the MC40 or MC65 Hose Coilers. It slides into any class 4 (2") hitch receiver tube Wt: 5 lbs. WLMB • The WLMB (Wild Land Mounting Bracket) is great for remote use where finding a place to mount the MC40 or MC65 can be tricky. Simply drive the mount into the ground roll up the hose Wt: 6 lb. TB80 • Extra mount for the MC40, MC65, or MC80 bolts to the Tailboard so hose can be directly loaded into the hose bed of the engine. The Tailboard does not just have to mount to the tailboard. It can be bolted to any sturdy horizontal surface. The TB80 is newly designed to work with the MC40/65. This mount is for Coiler use only, it is not intended to tow. NOTE: To use with the MC40 or MC65 the THMB will also be needed. Wt: 2 lbs. 888-663-4966
GENFO45 Water Backpack The Cadillac of water backpacks GENFO45 • The C&S original Water backpack • Padded shoulder straps and waist belt • 5 gallon capacity (only 4 minutes to completely discharge) • Industrial quick connects for quick fill or stowing the pump • Double action chrome plated brass hand pump • Effective stream distance of up to 24 feet (max 30 feet) • Large 4” polymer cap with removable filter for easy refill • Durable polymer and textile collapsible reservoir • Thermo-welded seams for strength and durability • Reinforced at the top and bottom for extra durability • Flexible horizontal baffle inside to reduce shifting water weight • Nozzle tip adjusts from straight stream to spray pattern • Easy ‘No Tool’ maintenance Wt: 5 lbs. (dry weight) GENFO45-FT • Foam attachment option is quick to install and aspirates the foam solution making finished foam Wt: 1 lb. GENFO45-QF • Quickly Fill the GENFO45 of GENFO45-PRO without wasted water. • Attach to a T-Valve,1” shutoff, or 3/4”GHT shutoff to quickly and efficiently fill your GENFO45 water backpack • Assembly Consists of: -1” Fe. NST or NPSH to 3/4” GHT adapter -3/4” GHT to 3/8” Quick connect adapter Wt: 0.5 lbs. CSsupplyinc.com
Drip Torch The best drip torch on the market • Conforms to Forest Service Specifications (USDA FS 5100-614) • Meets DOT regulations for transport of flammable fuel UN # 1B1-150 • Red body complies with new OSHA regulations 29 CFR 1910.114 • Heavy duty, light weight aluminum body • Reversible burner for easy storage and transport • Check valve to protect against flashback • Breather valve • Large diameter mouth for ease in filling • Double bottom for extra durability DT125 Height: Diameter Weight Capacity: Ship Wt: 14” (closed), 25.5” (assembled) 6” 4.6 lbs. (empty), 16 lbs. (full) 1.25 U.S. Gallons 6 lbs. (Closed for transport) (Assembled for use) REPLACEMENT PARTS: DT125-MB • Steel mount to secure the DT125 for transport • Designed so the DT-125 Lifts out • Bolt holes in the bottom to attach to the tail board, skid unit or other horizontal sturdy surface Wt: 2.6 lbs. Ht: 8 7/16” DRT03 Tank cover DRT0506 Check valve ball and seat DRT07 Outlet screen DRT08 Discharge plug DRT11 Spout and fuel trap DT125-QFMB • Mount to secure the DT-125 for transport • Designed so the DT-125 pulls straight out • 3 Bolt/screw holes in the mount to attach in a compartment, on a skid unit or other vertical sturdy surface • NOTE: When mounting the unit, a shelf or piece of angle iron needs to support the base of the torch Wt: .8 lbs. 888-663-4966 DRT83 Chain assembly DRT14 Nozzle/igniter mount DRT15 Igniter DRT22 Tank collar gasket DRT23 Tank cover lock ring DRT35 Air breather valve
High Viz™ Can you see me now? All Forestry Products meet or exceed USDA FS 5100 Series Specification WV1010-HIGH-VIZ • 1" Fe. Swivel x (2) 1" M. outlets • Powder coated High Visibility Yellow with Red ORALITE® Reflective Tape • Front and rear seats for less friction loss • Any combination of NST and NPSH Wt: 3 lbs. WV1510-HIGH-VIZ • 1.5" Fe. Swivel x (2) 1" M. outlets • Powder coated High Visibility Yellow with Red ORALITE® Reflective Tape • Front and rear seats for less friction loss • Any combination of NST and NPSH Wt: 4 lbs. WV15-HIGH-VIZ • 1.5" Fe. Swivel x (2) 1.5" M. outlets • Powder coated High Visibility Yellow with Red ORALITE® Reflective Tape • Front and rear seats for less friction loss • Any combination of NST and NPSH Wt: 4 lbs. TV1510-HIGH-VIZ • The T-Valve is cast aluminum designed to help extend wildland fire fighting hose lays and to supply an additional 1" line for filling pump cans or mop-up. Attaches to the new GENFO quick fill adapter GENFO45-QF (pg.27) • Powder coated High Visibility Yellow with Red ORALITE® Reflective Tape • The 1" outlet is controlled by an internal valve with a handle • 1.5" Fe. x 1.5" M. x 1" M. Any combination of NST or NPSH (Specify Thread Combination) Wt: 1 lb. Length: 5" HC1510-HIGH-VIZ • Powder coated High Visibility Yellow with Red ORALITE® Reflective Tape • More rigid design with knuckle guard • Curved clamping area and clasp design for easy, secure operation • The wildland hose clamp is made of cast aluminum • Designed for use on single jacket fire hose up to 1.75" • It has a built-in spanner for use on fittings 2.5" and smaller Wt: 1.8 lbs. Length: 10.75" CSsupplyinc.com
WYE VALVES Smooth waterway for less friction loss All Forestry Products meet or exceed USDA FS 5100 Series Specification WV1010 • 1" Fe. Swivel x (2) 1" M. outlets • Front and rear seats for less friction loss • Any combination of NST and NPSH Wt: 3 lbs. WV15 • 1.5" Fe. Swivel x (2) 1.5" M. outlets • Front and rear seats for less friction loss • Any combination of NST and NPSH Wt: 4 lbs. WV1510 • 1.5" Fe. Swivel x (2) 1" M. outlets • Front and rear seats for less friction loss • Any combination of NST and NPSH Wt: 4 lbs. WV2510 • 2.5" Fe. Swivel x (2) 1" M. outlets • Front and rear seats for less friction loss • 2.5” inlet NST ONLY • 1” outlets NST or NPSH • Powder-coated red Wt: 5 lbs. WV2515 • 2.5" Fe. Swivel x (2) 1.5" M. outlets • Front and rear seats for less friction loss • 2.5” inlet NST ONLY • 1.5” outlets NST or NPSH • Powder-coated red Wt: 5 lbs. WV2525 • WV2515-B (Brass) • 2.5" Fe. Swivel x (2) 1.5" M. outlets • NST only • Powder-coated red • CALL FOR AVAILABILITY Wt: 7 lbs. 2.5" Fe. Swivel x (2) 2.5" M. outlets • NST only • Powder-coated silver Wt: 9 lbs. BEHIND THE SCENES “PROUDLY MADE IN THE U.S.A.” SCENE - FORGED IN FIRE... Ask us about special size and thread combinations 888-663-4966
HYDRANT ACCESORIES The standard in valves and innovative wrench design HYDRANT GATE VALVE HGV25 • Designed with stainless steel non-rising internal stems • The aluminum body, internal gate and the inlet/outlet fittings are hard anodized for maximum protection against corrosion • The units take approximately 10 turns to open and close • 2.5" Fe. Swivel and 2.5" M. outlet NST Wt: 4 lbs. Ht: 11 1/2" BRASS HYDRANT GATE VALVE HGV25-B • They are designed with brass non-rising internal stems • The units take 10 turns to open and close • 2.5" Fe. Swivel and 2.5" M. outlet NST Wt: 9 lbs. Ht: 11 1/2" HYDRANT WRENCH HW733 • Fits hydrant stems BOTH 1" (square and pentagon) and 1.5" (pentagon) • Will work on worn stems • No more adjusting, just put the open end over the hydrant stem and pull the handle, the harder you pull, the tighter the grip • To release, just relax and lift it off the stem • Will actually stay on the stem and not in the mud while you work! • The spanner end of the wrench is designed for use on 2 1/2" and larger fittings Wt: 5 lbs. Length: 18” CSsupplyinc.com
BRASS BALL VALVES/STRAINERS Prevent rocks, sticks and other gunk from getting into suction hose line BRASS FULL PORT VALVES Heavy duty brass full port valves. Use to control or shutoff water, gas, oil or steam. Great for use on skid units and brush trucks. • 600 W.O.G. • Teflon Seals • Full Port Chrome Plated Ball • Adjusts Flow or Positive shutoff • Fe. NPT x Fe. NPT (all sizes) BFPV38 3/8” x 3/8” BFPV50 1/2” x 1/2” BFPV75 3/4” x 3/4” BFPV100 1” x 1” Wt: 0.3lbs. Wt: 0.5 lbs. Wt: 0.7 lbs. Wt: 1.1 lbs. BFPV125 1 1/4” x 1 1/4” BFPV150 1 1/2” x 1 1/2” BFPV200 2” x 2” BFPV300 3” x 3” BFPV400 4” x 4” Wt: 1.6 lbs Wt: 2.4 lbs. Wt: 3.5 lbs. Wt: 10.4 lbs. Wt: 17.5 lbs. BRASS FOOT VALVE • Valve body is cast Brass • Corrosion resistant, stainless steel screen, spring and lock nut FV-B 1/2" FV-B 3/4" FV-B 1" 1/2" 3/4" 1" 2" 3" 4" Fe. NPT Fe. NPT Fe. NPT FV-B 1 1/4" 1 1/4" Fe. NPT FV-B 1 1/2" 1 1/2" Fe. NPT FV-B 2" FV-B 3" FV-B 4" Fe. NPT Fe. NPT Fe. NPT Stainless Steel Foot Valve Strainers • All stainless steel construction • Extremely durable & corrosion resistant FV-SS 1” 1" Fe. NPT FV-SS 1 1/4” 1 1/4" Fe. NPT FV-SS 1 1/2” 1 1/2" Fe. NPT 888-663-4966
ADAPTERS, REDUCERS, & CAPS AD75GHT1NH 3/4” Fe. GHT X 1” M. NST AD75GHT1NP 3/4” Fe. GHT X 1” M. GHT AD1NH75GHT 1” Fe. NST x 3/4” M. GHT AD1NP75GHT 1” Fe. NPSH x 3/4” M. GHT AD1NH1NP AD1NH1.5NH 1” Fe. NST x 1” M. NPSH AD1NP1NH 1” Fe. NPSH x 1” M. NST AD1.5NH1NH 1.5” Fe. NST x 1” M. NST AD1.5NH1NP 1.5” Fe. NST x 1” M. NPSH 1” Fe. NST x 1.5” M. NST AD1NP1.5NH 1” Fe. NPSH x 1.5” M. NST AD1.5NH75GHT 1.5” Fe. NST x 3/4” M. GHT AD1.5NP75GHT 1.5” Fe. NPSH x 3/4” GHT AD2.5NH1.5NH 2.5” Fe. NST x 1.5” M. NST ADBIM15M ADMM1.5NH1.5NH BS-336 65MM - BI M. x 1.5” M. NST ADBIM25M BS-336 65MM - BI M. x 2.5” M. NST 1.5” M. NST x 1.5” M. NST ADMM2.5NH2.5NH 2.5” M. NST x 2.5” M. NST ADS1.5M1.5NH ADFF1.5NH1.5NH 1.5” STORZ x 1 1/2” RIGID M. NST ADS5M2.5NH 5” STORZ x 2.5” RIGID M. NST CAP & CHAIN-1 1”Fe. NST or NPSH CAP & CHAIN-1.5 1.5”Fe. NST or NPSH CAP & CHAIN-2 2”Fe. NST or NPSH CAP & CHAIN-2.5 2.5”Fe. NST or NPSH CAP & CHAIN-4 4”Fe. NST CAP & CHAIN-6 6”Fe. NST Don’t see the adapter you are looking for? Call us for availability & pricing!! CSsupplyinc.com 1.5” Fe. NST X 1.5” Fe. NST ADFF2.5NH2.5NH 2.5” Fe. NST x 2.5” Fe. NST
C&S REPAIR PARTS Repair service and Repair kits - www.cssupplyinc.com/videos C&S Repair Service: C&S Supply services all of the products we sell. Our hourly labor charge is nominal and it includes disassembling and diagnosing the problem, cleaning the nozzle, repairs as necessary, and reassembly. Every Nozzle is flow tested at the appropriate pressure, then each nozzle/valve pressure tested at 250 psi before it is returned. C&S Supply is the only authorized U.S. repair location of Viper nozzles. C&S Supply only warranties repairs made by C&S Supply. HGV25 Parts: Z-1600 • Valve Body for HGV25 Z-1601 • Gate for HGV25 Z-1602 • Gate Guide for HGV25 Z-1603 • 2.5” Swivel for HGV25 Z-1604 • 2.5” Discharge Coupling for HGV25 Z-1609 • “L” shaped handle for HGV25 Wye Valve Parts: WYE-RK2515 • Parts Commonly used in the repair of models WV2515, WV2510, WV15, WV1510, WV1010. balls, seats, seals, orings, handles, roll pins, set screws, bearings and Gaskets Z-1701_10 • VALVE BODY FOR WV1010 Z-1701_15 • VALVE BODY FOR WV15 or WV1510 Z-1702 • VALVE BODY FOR WV2515 or WV2510 WYE HANDLE • For models WV15, WV1510, WV2515 , WV2525 (with roll pin) RIGHT and LEFT sides are now the same Small Constant Flow and Dual Range Nozzle tip Parts: 1TIP-RK • Most common parts for repairing 105/15, 115, 110/23, 130 15TIP-RK60 • Most common parts for repairing 1560, 1560/20, 15TIP-RK100 • Most common parts for repairing 15100, 1590/20 888-663-4966
VIPER REPAIR Repair service and Repair kits - www.cssupplyinc.com/videos C&S Repair Service: C&S Supply services all of the products we sell. Our hourly labor charge is nominal and it includes disassembling and diagnosing the problem, cleaning the nozzle, repairs as necessary, and reassembly. Every Nozzle is flow tested at the appropriate pressure, then each nozzle/valve pressure tested at 250 psi before it is returned. C&S Supply is the only authorized U.S. repair location of Viper nozzles. C&S Supply only warranties repairs made by C&S Supply. Viper Nozzle Repair Kits: • Kits include all internal seals, shutoff ball, rubber bumper, pistol grip, shutoff handle, shutoff handle hardware, locater pin, swivel bearings, set pins, spinning teeth, and o-rings needed to repair a Viper nozzle. VNRK-1560 • Repair Kit for model SG1560 VNRK-3012 • Repair Kit for models SG3012 & SG7515 VNRK-9520 • Repair Kit for models SG9520 & SG12250 VNRK-BDS752 • Repair Kit for model BDS752 VNRK-BD3012 • Repair Kit for models BD3012 & BD7515 VNRK-1550 • Repair Kit for models CG1550 & FT1550 VNRK-2510 • Repair Kit for models CG2510, CG5016, FT2510 & FT5016 VNRK-8020 • Repair Kit for models CG8020, FT8020, & FT12250 VNRK-IND • Repair Kit for models ST2510-PV & ST5016-PV VNRK-IND2.5 • Repair Kit for models ST2510-PV & ST5016-PV Viper Valve Repair Kits: • Kits include: shutoff ball, seal, shutoff handle, shutoff handle hardware, swivel ball bearings, o-rings, and set pins. VVRK-3012 • Repair Kit for Small VIPER shutoff Valves. Models ending in 1550, 1560, 2510, 3012, 5016, 7515 & 752 VVRK-9520 • Repair Kit for Large VIPER shutoff Valves. Models ending in 8020,9520, & 12250 CSsupplyinc.com
VIPER REPAIR Common Valve Parts - www.cssupplyinc.com/videos Viper Handle Hardware: • Kits include: ball locator, ball actuator, pan head cover and two O-rings. V-HH5-3012 • Handle Hardware for Small VIPER shutoff Valves. Models ending in 1550, 1560, 2510, 3012, 5016, 7515 & 752 V-HH5-9520 • Handle Hardware for Large VIPER shutoff Valves. Models ending in 8020, 9520 & 12250 Ball and Seat Combos: VBSC-3012 • Ball & Seat for Small VIPER shutoff Valves. Models ending in 1550, 1560, 2510, 3012, 5016, 7515 & 752 VBSC-9520 • Ball & Seat for Large VIPER shutoff Valves. Models ending in 8020, 9520 & 12250 Viper Pistol Grip: V-PG15V • Replacement Pistol Grip for ALL VIPER shutoffs Viper Handles: V-HANDLE-3012 • Replacement handle and attaching hardware for Small VIPER shutoff. Models ending in 1550, 1560, 2510, 3012, 5016, 7515 & 752 NOTE: The above handle is now a kit. It was developed due to a handle design improvement in 2016 • Available in an assortment of colors: Red, Orange, Yellow, Green, Blue, and Black V-HANDLE-9520 • Replacement handle only for Large VIPER shutoff. Models ending in 8020, 9520 & 12250 NOTE: The above handle is now a kit. It was developed due to a handle design improvement in 2016 • Available in an assortment of colors: Red, Orange, Yellow, Green, Blue, and Black V-HANDLE-M-3012 • Replacement handle only for Small VIPER shutoff. Models ending in 1550, 1560, 2510, 3012, 5016, 7515 & 752 • Compact And durable replacement option to the traditional composite V-HANDLE-M-9520 • Replacement handle only for Large VIPER shutoff. Models ending in 8020, 9520 & 12250 • Compact And durable replacement option to the traditional composite 888-663-4966
FLOW DATA VIPER Nozzles SELECT GALLONAGE MODEL SG1560 SG3012 100 SG7515 SG9520 100 SG12250 100 100 NOZZLE PRESSURE (psi) 100 NOZZLE FLOW (GPM) 15 30 50 60 30 60 95 125 75 100 125 150 95 125 150 200 125 150 200 250 STREAM SETTING EFFECTIVE REACH SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS 62 85 98 108 85 112 131 141 118 138 144 148 128 141 148 154 131 144 151 157 STYLE CG1550-30 CG2510-95 CG5016-125 CG8020-200 CONSTANT GALLONAGE FLOW DATA STREAM SETTING SS NOZZLE PRESSURE (psi) 100 100 100 100 STYLE FT1550 FT2510 FT5016 FT8020 FT12250 NOZZLE PRESSURE (psi) 50 75 100 50 75 100 50 75 100 50 75 100 50 75 100 NOZZLE FLOW (GPM) 30 95 125 210 NOZZLE FLOW (GPM) 15 23 50 25 38 100 50 70 160 80 145 200 125 200 250 CSsupplyinc.com SS SS SS AUTOMATIC FLOW DATA STREAM SETTING SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS EFFECTIVE REACH 69 82 112 121 131 141 128 138 151 131 144 161 151 145 165 EFFECTIVE REACH 85 135 144 157
FLOW DATA VIPER Foam Equipment FOAM NOZZLES FLOW DATA STYLE PVB1560 PVB3012 PVB7515 NOZZLE PRESSURE (psi) NOZZLE FLOW (gpm) 30 75 100 75 100 75 100 35 60 69 95 110 EXPANSION RATE 10:1 10:1 12:1 12:1 9:1 9:1 STYLE BYPP1560 BYPP3012 BYPP7515 BYPP9520 FOAM PROPORTIONER FLOW DATA PRESSURE (psi) 100 150 100 150 100 150 100 150 FLOW (gpm) 18 23 46 56 92 113 110 130 FOAM 39% 39% 33% 33% 30% 30% 30% 30% EFFECTIVE REACH 30 36 39 46 46 56 PRESSURE LOSS BY-PASS 7% 7% 14% 14% 15% 15% 15% 15% Eductor Operating instructions for a successful foam operation: 1. Operating pressure: 200 psi inlet pressure suggested for best operation. We have provided basic calculations online . (average pressure loss through the eductor 30-40%) 2. Bypass Switch arrow pointing toward the FOAM to educt foam concentrate. To flush the system or break the venturi turn the bypass to the WATER position. (Note: the bypass only moves about 3/4”) 3. Hose length after the eductor: 1” hose: no more than 200’ past the eductor (30GPM eductor only) 1-1/2” hose: no more than 150’ past the eductor (See example online) 1-3/4” hose: no more than 200’ past the eductor 4. Nozzle must flow at least the rated flow of the eductor. If the nozzle flows less than the eductor rating, venutri will not be achieved and no foam will be created. If you are using a selectable nozzle, move the flow to the next higher setting if no foam is generated. 5. Dial percentage that is desired should be pointing at the indicator arrow or at the pickup tube coupling depending on the age of the eductor. Water Bypass Operation: Arrow pointing to FOAM, the water is forced through the center creating the venturi and makes foam. Arrow pointing to WATER, the water is allowed through the bypass holes breaking the venturi and stopping foam for flush or a higher desired flow. 888-663-4966
CSsupplyinc.com
888-663-4966
SMALL VIPER VALVES Part numbers ending in: 10SS, 15SS, 1530, 1550, 1560, 2510, 3012, 3015, 5016, 550, 540, 7515 VB1560 and VB3012 BOM REFERENCE 1 1a 2 2a 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 KIT# VVRK-3012 VBSC-3012 V-HH5-3012 V-SWKIT1560 V-SWKIT3012 SEAT RETAINER (3 PIECES) BALL ACUATOR (2 PEICES) PAN HEAD COVER SWIVEL SET PIN BALL BEARINGS HANDLE (BAIL) V-SEATRTNR-3012 V-BALLACT-3012 V-PANHEAD-3012 V-SETPIN-3012 V-BEARINGS-3012 V-HANDLE-3012 VB1560 and VB3012 AVAILABLE KITS KIT Name Valve Repair Kit Small Ball & Seat Combo Small Handle Hardware Small Swivel Kit 1" Small Swivel Kit 1.5" Small PARTS CONTAINED 1,1a,3,4,6,7,10,11,12,13,14,15,16,17,18 4,10,11,12 6,7,13,14,15 1,3,16,17 1a,3,16,17 1 1 1 1 32 1 PART NAME 1" GASKET 1.5" GASKET 1" SWIVEL 1.5" SWIVEL SWIVEL O-RING BALL PISTOL GRIP BALL LOCATOR (2 PIECES) PISTOL GRIP SET PIN VALVE BODY PART # GASKET_1 GASKET_15 V-1" SWIVEL V-1.5" SWIVEL V-ORING-SW-3012 V-BALL-3012 V-PG15V V-BALLLOC-3012 V-SETPIN-3012 VLVBDY-3012 QUANTITY 1 1 1 1 1 1 1 1 1 1 - Pull the bail handle toward the swivel to OPEN the valve. - Push the bail handle toward the tip of the nozzle to CLOSE the valve. - Maximum Operating Pressure for VIPER Valves is 580 psi Maintenance: - Test nozzle before putting into service. - Clean nozzle by flushing with water after use. - Use non-detergent soap to clean dirt from the exterior to reduce wear . - Regularly check the bail handle screws that they are tight. If taken out use medium strength thread locker on the threads before reassembly. - Periodically service your nozzle or have your fire equipment dealer service it. - Normally serviced parts are the: Ball, Seat assembly, and the handle hardware (Ball locator screw, Actuator, Pan head cover). PLEASE BE RESPONSIBLE! PLEASE BE CAREFUL! THE USER OF THIS EQUIPMENT IS PERSONALLY RESPONSIBLE FOR THE FOLLOWING: 1. You need to know and understand that Firefighting and Emergency response is dangerous and proper training is needed. 2. You need to be physically fit and skillful in the use of any equipment that you may need to use. 3. You need to know that your equipment is in proper working order. 4. You need to know carelessness or negligence may result in injury or death. PLEASE BE RESPONSIBLE! PLEASE BE CAREFUL! SHUTOFF USE: - Open and close the valve slowly to reduce risk of water hammer. CSsupplyinc.com
LARGE VIPER VALVES Part numbers ending in: 8020, 9520, 12250 VB9520 and VB9520-2.5 BOM REFERENCE 1 1a 2 2a 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 KIT# VVRK-9520 (*) VBSC-9520 V-HH5-9520 V-SWKIT9520 V-SWKIT9520-2.5 SEAT RETAINER (3 PIECES) BALL ACUATOR (2 PEICES) SWIVEL SET PIN BALL BEARINGS HANDLE (BAIL) V-SEATRTNR-9520 V-BALLACT-9520 PAN HEAD COVER V-PANHEAD-9520 V-SETPIN-9520 V-BEARINGS-9520 V-HANDLE-9520 VB9520 and VB9520-2.5 AVAILABLE KITS KIT Name Valve Repair Kit Lg. Ball & Seat Combo Lg. Handle Hardware Lg. Swivel Kit 1" Lg. Swivel Kit 1.5" Lg. 1 1 1 1 32 1 PARTS CONTAINED 1,1a,3,4,6,7,10,11,12,13,14,15,16,17,18 4,10,11,12 6,7,13,14,15 1,3,16,17 1a,3,16,17 PART NAME 1.5" GASKET 2.5" GASKET 2.5" SWIVEL SWIVEL O-RING BALL PISTOL GRIP BALL LOCATOR (2 PIECES) PISTOL GRIP SET PIN VALVE BODY PART # GASKET_15 GASKET_25 1.5" SWIVEL (LARGE) V-1.5" SWIVEL-9520 V-2.5" SWIVEL-9520 V-ORING-SW-9520 V-BALL-9520 V-PG15V V-BALLLOC-9520 V-SETPIN-PG VLVBDY-9520 QUANTITY 1 1 1 1 1 1 1 1 1 1 SHUTOFF USE: - Open and close the valve slowly to reduce risk of water hammer. - Pull the bail handle toward the swivel to OPEN the valve. - Push the bail handle toward the tip of the nozzle to CLOSE the valve. - Maximum Operating Pressure for VIPER Valves is 580 psi Maintenance: - Test nozzle before putting into service. - Clean nozzle by flushing with water after use. - Use non-detergent soap to clean dirt from the exterior to reduce wear . - Regularly check the bail handle screws that they are tight. If taken out use medium strength thread locker on the threads before reassembly. - Periodically service your nozzle or have your fire equipment dealer service it. - Normally serviced parts are the: Ball, Seat assembly, and the handle hardware (Ball locator screw, Actuator, Pan head cover). PLEASE BE RESPONSIBLE! PLEASE BE CAREFUL! THE USER OF THIS EQUIPMENT IS PERSONALLY RESPONSIBLE FOR THE FOLLOWING: 1. You need to know and understand that Firefighting and Emergency response is dangerous and proper training is needed. 2. You need to be physically fit and skillful in the use of any equipment that you may need to use. 3. You need to know that your equipment is in proper working order. 4. You need to know carelessness or negligence may result in injury or death. PLEASE BE RESPONSIBLE! PLEASE BE CAREFUL! 888-663-4966
Nozzle Selling Basic Line of Questioning (page 1 of 2) PRICE LIST (P.L.) WILL LIST ALL PRODUCTS AND CATALOG (CAT.) PAGES THE P.L. CAN BE A GREAT REFERENCE TOOL … What size inlet (hose coupling) are you looking for? ¾”, 1”, 1-1/2” (1-3/4”), or 2-1/2”? Note: 1-1/2” and 1-3/4” couplers are the same. What threads do you use? National Standard Hose (NST, NH) or National pipe straight hose (NPSH, IPT, NPT) What type of nozzle would you like? Select Gallonage, Constant Gallonage, Automatic, Foam, Smoothbore, or Small “BREAK- APART” If: Select Gallonage, What Flow rate and at what PSI Constant Gallonage, What Flow rate and at what PSI Automatic, What Flow rate or range and at what PSI Foam, What Flow rate (CAT. PAGES 6, 7, 10) (CAT. PAGES 4, 5, 11) (CAT. PAGES 12) (CAT. PAGES 14, 15 & 23) (P.L. Page 2, 3) (P.L. Page 2, 3) (P.L. Page 4) (P.L. Page 5) Smoothbore Nozzle, what orifice size or flow rate? Please note which valve, VB model, should go with each smoothbore tip) (CAT. PAGES 9, 18, 19 & 22) (P.L. Pages 6 & 7) psi 3/16" 1/4" 40 50 60 80 100 WORKS BEST WITH: 6.5 7.5 8 9.3 10 11 13 14 SMOOTH BORE THEORETICAL FLOW DATA/ GPM 5/16” 18 20 22 25 29 16.6 18 VBU25 VBU25 VBU25 48 54 57 66 75 73 82 89 103 116 107 119 129 149 168 143 160 176 203 227 166 186 202 233 262 189 211 230 265 298 212 237 259 299 335 VBU25 VBU25 VBU25 VBU25 (CAFS) VBU25 (CAFS) VBU95 VBU95 VBU95 VBU95 VBU95 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB95202.5 VB95202.5 VB95202.5 VB95202.5 VB95202.5 VB95202.5 VB95202.5 VB95202.5 VB95202.5 3/8" 1/2" 5/8" 3/4" 7/8" 15/16" 1" 1 1/16" 1 1/8" 1 1/4" 27 31 32 37 43 239 267 291 336 377 295 329 359 415 465 OR Small “BREAK-APART”, continue to instructions on next page CSsupplyinc.com
Nozzle Selling Basic Line of Questioning (page 2 of 2) Does customer want a Ball shutoff or build a ‘Break-Apart’ nozzle Step 1 BALL SHUTOFF What size inlet are they looking for? 1” (w/ 1” waterway) SBV10SS VB1560 VBU25 1.5” (w/ 1” waterway) SBV15SS VB3012 VBU95 What threads do you use? National Standard Hose (NST, NH) or National pipe straight hose (NPSH, IPT, NPT) Step 2 NOZZLE TIP For break apart or inexpensive nozzles, a nozzle tip can be added to a ball shutoff. What Type of nozzle is preferred? Dual Range Nozzle Constant flow Nozzle Smoothbore Nozzle (CAT. PAGE 17) (CAT. PAGE 17) (CAT. PAGE 18) What GPM do they want? (For smoothbore sizes see the chart on page 43) MOST OF THESE PRODUCTS ARE ON PAGE 5 OF THE PRICE LIST. HOSE COILERS: What size hose are they going to roll? MC40 rolls 1” & 1.5” hose MC65 rolls 1.5” to 3” hose (this roller can also roll 1” hose with some guidance from the operator) *** One mounting bracket (MB) is included with the MC40 and MC65 THMB trailer hitch mounting bracket is the most popular accessory for these mounts MC80 rolls 4” -7” hose ***One Tailboard Mount is included with each unit. Extra mounting brackets can be ordered separately (CAT. PAGE 26) TEL: 888-663-4966 sales@cssupplyinc.com FAX: 970-663-3878 (P.L. Page 9) (P.L. Page 7) (P.L. Page 7) (P.L. Page 7) 1.5” (1.75”) (w/ 1 3/8” waterway) VB9520NPG VB9520 VBU150 (CAT. PAGES 9, 19. 20, 21) 2.5” with 1.5” outlet (w/ 1 3/8” waterway) VB9520NPG-2.5 VB9520-2.5 VBU250 (P.L. Page 6) 888-663-4966
NOTES CSsupplyinc.com
NOTES 888-663-4966
ORDERING INFORMATION ORDERS: TERMS: DELIVERY: Orders will be accepted by fax at 970-663-3878 or sales@cssupplyinc.com Net 30 Days, 1% discount for payment within 15 days of invoice date. Late Payments may result in product hold pre-pay status. Credit card payments are not eligible for the 1% discount within 15 days. F.O.B. Fort Collins, Colorado. All Shipments will be by UPS Ground. Please advise if express shipment or special carrier is required. SHIPMENTS: In-Stock items are shipped within 24-48 hours after receipt of order. We will contact you with expected delivery for any non-stock items. Shipping Discrepancies must be reported within 10 days of delivery to assure accurate adjustment. RETURN POLICY: Items may be returned for Credit or Exchange only. Call 888-663-4966 for instructions and Returned Goods Authorization number (RGA). Goods returned in new condition will be restocked and can be subject to a 15% restocking charge. All returns must be properly packaged to avoid any damage to item(s). If items are damaged upon receipt, an appropriate amount will be deducted from your credit. Items must be in like new condition to receive full account credit. Any item permanently marked with your identification is NOT returnable. REPAIR POLICY: Call 888-663-4966 for instructions and Returned Goods Authorization number (RGA). Enclose a note explaining the problem and any other pertinent information. All effort will be made to repair the item or an equivalent replacement will be made. Defective items will be fixed according to the warranty policy. Charges for repair and parts will be issued accordingly. THREADS: CARRIER: NST or NPSH threads are available on most items. If you designate a carrier other than UPS, you will be responsible for paying for all the items shipped even if your carrier loses some of it. Be sure to insure all items through your carrier. Carrier designation can only be done on freight collect shipments. WE ACCEPT – Visa, MasterCard and American Express LIMITED WARRANTY FOR C&S PRODUCTS C&S Supply, Inc. and its manufacturers warrant their products to the original purchaser or any person to whom the product is transferred, that our product is free of defects in material and workmanship for five (5) years commencing from the date of purchase. This warranty is limited to repairing or replacing the defective product. In the event that the defect is found to be attributable to C&S, the product will either be repaired or replaced, at the discretion of the company, at no cost to the customer. To qualify for this warranty, the product must be returned to the Company, shipping prepaid, proof of purchase may be required, and within a reasonable time after discovery of the defect. The company disclaims any implied warranties of merchantability or of fitness for any particular purpose. No warranties will apply if the product is in any way altered or modified after delivery by the company.
1 Publizr