0

EACH PURCHASE OF THIS PRODUCT LEADS TO A DONATION TO THE SUSAN G. KOMEN FOUNDATION. ASCOT TIRE MOUNTING PINK PASTE • For use on all tires including low profile and run flat, and also safe for alloy wheels • No water, no mixing. Use right from the container • Extra slippery to help mount tires with stiff beads • Apply with brush • Makes tire mounting faster and easier • Manufactured by JTM Products • Formally Ascot White Paste ASCOT NO. 432-02046 432-02067 MFG. NO. 2046 2067 DESCRIPTION Ascot Pink Tire Mounting Paste, 8 lb. Pail (4 Per Case) Ascot Pink Tire Paste, 8lb. Low Profile Pail (4 Per Case)

SMART LOCK STORAGE CABINET • All steel 16 gauge construction fully assembled • Black powder coat finish • 72”H x 48” W x 24” D, with clear view doors • 45 blue bins included: • 24 pc: 5”H x 5-1/2”W x 11”D • 15 pc: 7”H x 8”W x 15”D • 6 pc: 7”H x 16-1/2W x 15”D • CompX eLock preinstalled • Non-network keyless smart lock system • Provides a comprehensive audit trail of the last 1500 access attempts • Stores up to 250 unique PIN codes Ascot No. 719-82478 Mfg. No. H-9015 Description Smart Lock Storage Cabinet

3 FEATURED PRODUCTS 1" DRIVE 4 PC. HEAVY DUTY TORQUE SOCKET SET • Sockets properly torque wheel nuts to exact factory specs • Prevents warping of rotors, which causes brake pulsation • Eliminates broken studs and nuts• Avoids damage to aluminum alloy wheels • Stops customer complaints about overtightened lug nuts • Sockets stop turning at the CORRECT torque • Includes blow mold case • Made in Taiwan 168-04994 ASCOT NO. MFG. NO. 168-04994 SO4994 DESCRIPTION 4-Piece 1" Drive Truck Torque Socket Set SET INCLUDES: • 1-1/4" 1" Drive Torque Hex 250 ft./lb. Red, • 33mm 1" Drive Torque Hex 475 ft./lb. Brown • 1-1/2" 1" Drive Torque Hex 475 ft./lb. Black • 13/16" 1" Drive Torque Sq. 475 ft./lb. Yellow WHEEL STUD SERVICE KIT • Works on most hubs for installation and removal • All sizes of studs • Installation done by pushing on the head, eliminating the need for threaded adapters • Reduces number of adapters required • Reduces damage to studs • Increases ease of use • Remove and install 10 studs in only 10-15 minutes (compare to 20-30 minutes for more expensive competitive products) • Can be powered with an impact wrench, no hydraulic power source required • No need to remove hub from vehicle • Reduces risk of damage to hubs, studs, and bearings when using tool • Weighs only 12 lbs., assembled to remove studs and 14 lbs., assembled to install studs • Made in Taiwan Wheel Stud Service Kit Video 493-91420 ASCOT NO. MFG. NO. 493-91420 DESCRIPTION NS-9142 Wheel Stud Service Kit

FEATURED PRODUCTS 5-PIECE 1/2" DRIVE TWIST SOCKET SET • Designed to easily remove damaged, rounded nuts • Use with 1/2" drive impact wrench or breaker bar • CR-MO steel for long life • Heavy duty blow molded case • INCLUDES: 17mm, 19mm, 21mm & 22mm twist sockets plus a 50mm extractor punch 1/2" DRIVE 4 PC. METRIC ULTIMATE TORQUE S • 17mm, 19mm, 21mm sock interchangeable disc included in a blo molded case • 40% increase in r of nuts and bolts • Non-slip sock design • Will remove up t rounded nuts and bolts • Use as an impact socket or with the Ultima 4 492-00502 ASCOT NO. MFG. NO. 492-00502 TSS5 DESCRIPTION 5-Piece 1/2" Drive Twist Socket Set ASCOT NO. MFG. NO. DESCRIPTION REPLACEMENT SOCKETS FOR TSS5 SET 17mm Replacement Twist Socket 492-05021 492-05022 492-05023 492-05024 492-05025 TSS5-1 TSS5-2 19mm Replacement Twist Socket 21mm Replacement Twist Socket TSS5-3 TSS5-4 22mm Replacement Twist Socket Twist Socket Set Extractor Punch TSS5-5 CORDLESS TIRE BUFFER • Boost your tire repair efficiency with the Chicago Pneumatic • Dedicated buffing and drilling • 2-Mode Drive Control™ • Drilling Mode: 1,200 RPM • Buffing Mode: 2,500 RPM • Runtime to complete up to 30 flat repairs on a single XC4.0Ah battery • Premium rubber overmold withstands corrosive materials and provides increased comfort when in use • Compatible with all M12™ batteries & chargers • POWERSTATE™ Brushless Motor • REDLINK PLUS™ Electronic Intelligence: • REDLITHIUM™ batteries: • Kit includes: Low Speed Tire Buffer, M12™ REDLITHIUM™ CP2.0 Battery, M12™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack, M12™ Lithium-ion Battery Charger, Quick Change Adapter, Carrying Case CORDLESS LOW SPEED BUFFER KIT c. Metric Ultimate Torque Socket Set 158-40922 ASCOT NO. MFG. NO. 158-13873 158-08323 DESCRIPTION CP873KNA CP8323 Cordless Tire Buffer Kit Cordless Tire Buffer (Tool Only) ASCOT NO. MFG. NO. 158-40920 158-40922 DESCRIPTION 2409-20 2409-22 Cordless Low Speed Buffer - Bare Tool Cordless Low Speed Buffer Kit - Inc. 2 Batteries

5 FEATURED PRODUCTS PROFESSIONAL JACKS 20-TON AIR/HYDRAULIC BOTTLE JACK • Thick jack base provides exceptional support and stability in severe conditions • Quick-connect feature on air valve allo easy disconnect and connection of air hose & more compact storage SPECIFICATIONS Ascot No. Mfg. No. 301-20220 Min. Hgt. Max Hgt. AS2022 Hyd. Lift Range 10-1/8" 19-7/8" 6-1/2" 3-1/8" N/A N/A 25-TON AIR/HYDRAULIC TRUCK JACK • Heavy-duty spring return for manually controlled retraction • Narrow chassis fits between tandem truck wheels • Fully welded pump provides superior strength and leak-free extended service life • Wiper seal for additional ram protection from contaminates • Handles can be locked at vertical, 45 degree and horizontal positions • Large 8” diameter hard rubber wheels for easy positioning and maneuverability • Release knob at the top of the long T-handle works in any position • Comes with 3 adapters in different sizes • Overload and bypass devices prevent using beyond rated capacity • Meets or exceeds ASME PASE-2024 Standard Ascot No. Mfg. No. 302-19150 Description AS1915 25-Ton Air/Hydraulic Truck Jack Min. Hgt. Max Hgt. Hyd. Lift Range 10-1/2" 21-1/8" 6-1/8" Exten. Screw Handle Length 4-1/2" 45-1/4" Ship Wt. (Lbs) 101.9 301-20220 Description 20Exten. Screw Chassis Size/Ht. Saddle Size Handle Length Ship Wt. (Lbs) 9-3/8" 35.1 302-19150 ASCOT 6-TON FAST-TO-LOAD LONG CHASSIS JACK • Heavy-duty construction provides stability and endurance • Fast to load, it takes 1 full stroke to load, and 3 pumps to maximum height under no load • Controlled descent with speed limit to ensure safe operation • Chrome plated ram for additional rust resistance • Super FAST and easy assembly • Handle locks in vertical, 45 degree or horizontal positions and has independent release knob • Swivel rear casters provide smooth maneuvering and positioning • Overload and bypass safety valves prevent use beyond the rated capacity and over extension of the ram • Meets or exceeds ASME PASE-2024 Standards 302-05616 Ascot No. 302-05616 Hyd. Lift Range 425/8" 543/4" x 1613/16" 5-1/8" 425/8" Mfg. No. AS5616 Chassis Size/Ht. Saddle Size Description Ascot 6-Ton Fast-ToLoad Long Chassis Jack Handle Length Ship Wt. (Lbs) 185 lbs. Min. Hgt. Max Hgt. 5-7/8" 259/16"

FEATURED PRODUCTS PROFESSIONAL JACKS 1/2-TON TWO STAGE TELESCOPIC JACK STAND • Foot pedals allow hands free operation • Overload valve prevents jack from being used beyond its rated capacity • Speed limiting valve ensures an automatic safe speed descent - not greater than 1" per second • "Hidden" hydraulic double pump system provides FAST lifting - under no load the jack can reach maximum height in 35 pumps • The cover on the pump system helps keep dust and dirt out of the hydraulics for longer life • Deluxe saddle with 2 angle adjustments - fore/aft and side to side - for maximum user flexibility • Includes a 59” tie down chain to secure the load • Chrome plated piston rod and pump core for longer service life • The grease fitting at the ram nut allows easy lubrication of the shafts • 4" steel swivel casters provide effortless maneuvering through the shop, 2 standard and 2 with locking mechanisms 1-TON TWO STAGE TELESCOPIC JACK STAND • Foot activated raising and lowering pedals allow hands-free operation • HJ0505 Deluxe saddle with 2 angle adjustments - fore/aft and side to side - for maximum user flexibility. Includes a 59” tie down chain to secure the load • Heavy-duty 4” steel swivel casters provide effortless maneuvering through the shop, 2 standard and 2 with locking mechanism • Strong square tube base with reinforcement rods provides exceptional strength and stabilit • Heavy steel construction formaximum durability • Welded ram nut allows removal of the seal at joint eliminating the possibility of future leakage • Meets or exceeds ASME PASE-2024 Standard 66 371-03321 371-03332 SPECIFICATIONS Ascot No. Mfg. No. 371-03321 HJ3321 Description SPECIFICATIONS Ascot No. Mfg. No. 1/2-Ton Two-Stage Telescopic Transmission Jack Min. Hgt. Max Hgt. Saddle Tilt Forward/ Backward 37" 76-3/8" 29 °/10 ° Saddle Tilt Left/Right 27.2°/46.8 ° Ship Wt. (Lbs) 158.4 lbs 371-03332 Min. Hgt. HJ3332A-B Description 1-Ton Two-Stage Telescopic Transmission Jack Max Hgt. Saddle Tilt Forward/ Backward 37"-9/16" 76-3/8" 298°/10 ° Saddle Tilt Left/Right 27.2°/46.8 ° Ship Wt. (Lbs) 158.4 lbs

TIRE BEAD BREAKING HAMMERS • A unique tire & wheel service hammer used for separating tires from wheel rims • Patented heat treatment process ensures uniform hardness on all faces including edges, thus preventing mushrooming of head & accidents due to chipping • Ergonomic rubber grip handle absorbs vibrations & reduces fatigue • Head is induction case hardened for extended life • 5 lb. & 10 lb. hammers available 429-10005 ASCOT NO. MFG. NO. 429-10005 AS-BBH5 429-10010 AS-BBH10 DESCRIPTION 5 lb. Bead Breaker Hammer 10 lb. Bead Breaker Hammer 429-10010 TRUSTY COOK DEAD BLOW SLEDGE HAMMER LINE 428-00001 • With a welded steel handle, shot-filled canister, and hot-cast polyurethane, this model is a go-to for mechanics • Compact, versatile, sledge hammer — dead blow, no-bounce, striking force • Ideal for one-handed use in confined spaces • Oil and chemical resistant – Perfect for the automotive garage setting • No-Slip Grip – Comfortable, durable grip for a strong hold in all conditions • Perfect for wheel weight installation • Made In USA 428-00014 428-00010 428-00007 ASCOT NO. 428-00001 428-00007 428-00010 428-00014 MFG. NO. DESCRIPTION Model S1 Model 7 Model 10 Model 14 18 Oz. Slimline Soft Face Sledge Dead Blow Hammer 5.5 Lb. Soft Face Sledge Dead Blow Hammer 9 Lb. Soft Face Sledge Dead Blow Hammer 12 Lb. Soft Face Sledge Dead Blow Hammer WEIGHT 18 Oz. 5.5 lbs. 9 lbs. 12 lbs. FACE DIAMETER 1-1/4” 2-3/4” 2-3/4” 3.25” HEAD LENGTH 4” 7” 7” 8” OVERALL LENGTH 10-5/8” 20” 30” 36”

9 FEATURED PRODUCTS BIG WIPES HD PRO+ • Remove paint, adhesive, Poly foam, gap fill, oil and more from hands, tools & surfaces • Dual sided abrasive fabric for the toughest jobs - Abrasive side removes even the most stubborn grime, while the smooth side soaks up the grime • Upgraded 4x4 formula – contains 4 powerful cleaning agents + 4 skin conditioners; Aloe Vera, Lanolin, Vitamin E and Glycerin • Dermatologically tested to be safe on hands. ASCOT NO. MFG. NO. 395-20065 395-20046 DESCRIPTION 60020065 60020046 Big Wipes HD Pro+ 240ct. Big Wipes HD Pro+ 80ct. 395-20065 395-20046 BIG WIPES PRO+ HEAVY DUTY WIPES - 40-COUNT CUP HOLDER SIZE - 8 TUBS PER CASE • Compact canister designed to fit your vehicle’s cup holder • 40 wipes per tub – 8 tubs per case • Perfect for professionals who need fast, easy access on the move • Ideal for vans, trucks, and service vehicles • Removes paint, adhesive, oil, expanding foam, and more • Skin-friendly, clinically proven • Textured fabric for tough, stuck-on dirt • Suitable for hands, tools, and surfaces • Foil seal for extended shelf life BIG WIPES PRO+ HEAVY DUTY MULTISURFACE WIPES - 80 PER TUB - 8 TUBS PER CASE • Removes paint, silicone, tar, and more • 80 wipes per tub – 8 tubs per case • Versatile cleaning power for various surfaces • Skin-friendly, clinically proven • Exceptionally absorbent • Biodegradable wipe ASCOT NO. MFG. NO. 395-20069 DESCRIPTION 60020069 Big Wipes Pro+ Heavy Duty Wipes - 40-Count Cup Holder Size - 8 Tubs per Case ASCOT NO. MFG. NO. 395-20003 DESCRIPTION 60020003 Big Wipes Pro+ Heavy Duty Multi-Surface Wipes - 80 per Tub - 8 Tubs per Case

TPMS TOOLS & SENSOR KITSTS508WF, ITS600, ITS600PRO, TS900 TS900K140 ITS600PRO80 TS900 TABLET WITH 140 ASCOT 1-SENSORS 469-90140 ITS600 TABLET WITH 80 ASCOT 1-SENSORS 469-60080 INCLUDES: 12 1-SENSORS TS508WFK-12 TS508WF TABLET WITH 12 ASCOT 1-SENSORS & METAL VALVE KIT 469-51812 1.855.288.3587 USSUPPORT@AUTEL.COM AUTEL ACADEMY TRAINING autel.us/academy ITS60060 ITS600 TABLET WITH 60 ASCOT 1-SENSORS 469-60060 WEB: AUTEL.US FOLLOW US: @AUTELTOOLS

11 TABLE OF CONTENTS AIR SYSTEMS ............................ 14 Air Compressors ............................. 15 Inflation Systems ............................23 Filters, Regulators and Lubricators ............ 24 Hose Reels & Accessories .................... 28 Air Line Couplers & Plugs .................... 34 Hose Adapters ............................. 38 Clamps .................................... 40 AIR TOOLS ..............................42 Impact Wrenches ........................... 43 Sanders & Blue Tork ......................... 46 Air Ratchets ................................ 47 Buffers & Grinders .......................... 48 Hammers, Grinders & Drills ................... 51 Ascot Impact Wrenches ......................53 Air Tool Lubricants & Conditioners ............ 66 Accessories & Work Stations ................. 68 Cordless Tools .............................. 69 WHEEL SERVICE PRODUCTS ...........76 Impact Socket Sets ..........................77 Individual Impact Sockets. . . . . . . . . . . . . . . . . . . . 83 Torque Wrenches & Accessories .............. 86 Torque Sockets & Extensions .................. 91 Loose Nut Prevention ....................... 93 Wheel Centering Products ................... 95 Lug Nut Removal Products ................... 97 Wheel Attaching Hardware ..................107 Tire & Wheel Service Tools ....................111 Stud & Hub Cleaning Tools ................... 115 LIFTING EQUIPMENT ................... 118 Bottle Jacks ................................120 Jack Plates .................................124 Service Jacks ...............................125 Jack Stands ................................136 Specialty Jacks .............................142 Wheel Dollies ..............................145 Vehicle Stands & Accessories .................147 Jack Oils ...................................149 Shop Cranes ...............................150 Brake Component Handlers .................. 151 Rams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 TIRE & WHEEL SERVICE ...............154 Tire Lubricants & Sealants ................... 155 Markers ...................................163 Hydraulic Pumps ...........................164 Bead Breakers ..............................166 OTR Service Tools ........................... 173 Cribbing Sets & Wheel Chocks ................ 174 Bead Seating Devices ....................... 176 Chloride Pumps ............................183 Mount/Demount Tools ......................185 Hammers & Wedges ........................192 Wrenches & Lug Wrenches. . . . . . . . . . . . . . . . . . . 197 Shop Service Tools ......................... 200 Wheel Dollies ............................. 203 Safety Inflation Cages ...................... 205 Misc Gauges ...............................210 VALVE HARDWARE .................... 213 TPMS Tools & Sensors .......................215 TPMS Accessories & Kits .................... 226 TPMS Tools ............................... 234 TPMS Transmitters ......................... 237 Aftermarket Accessory Kits ................. 240 Tire Valves ................................ 244 Truck & Specialty Valves .................... 246 Valve Caps, Cores & Extensions .............. 252 Special Application Products ................ 256 Large Bore Valves. . . . . . . . . . . . . . . . . . . . . . . . . . 259 Valve Hardware Tools ...................... 268 Tire Gauges ................................274 Air Chucks ................................ 278 Inflator Gauges ............................ 282 Tire Inflators .............................. 285 SERVICE EQUIPMENT ..................291 Tire Changers ............................. 292 Tire Changer Accessories ................... 302 Heavy Duty Tire Changers .................. 306 Wheel Balancers ........................... 309 Wheel Balancer Accessories ..................316 Lifts ...................................... 320 Rubber Blocks & Lift Pads. . . . . . . . . . . . . . . . . . . 328 Shop Presses ............................... 331 BUYER'S GUIDE WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TABLE OF CONTENTS

TABLE OF CONTENTS 12 WHEEL BALANCING .................. 334 Lead Passenger Wheel Weights ............. 335 Zinc Passenger Wheel Weights .............. 336 Steel Passenger Wheel Weights ..............337 Plasteel® Passenger Wheel Weights .......... 338 Heavy Duty Lead Truck Wheel Weights ....... 339 Zinc Truck Wheel Weights .................. 340 Steel Adhesive Wheel Weights ...............341 Lead Adhesive Wheel Weights .............. 343 Wheel Weight Displays & Kits ............... 344 Steel Adhesive Rolls & Accessories ........... 345 Wheel Weight Tools ........................ 346 Balancing Beads ........................... 348 ALIGNMENT ........................... 354 Alignment Tool Assortments ................ 355 Camber/Caster Tools ....................... 356 Heavy Duty Alignment ..................... 362 Automotive Alignment Equipment ........... 364 AUTOMOTIVE & FLEET SERVICE ...... 367 Battery Chargers & Testers .................. 368 Exhaust Hoses & Tailpipe Adapters ........... 369 Bench Grinders & Shop Vises ................ 370 Pliers & Screwdrivers ........................372 Wrenches & Tools ...........................374 Shop Cleaners & Brushes ....................375 Shop Lights ............................... 379 Tire Displays & Carts ....................... 380 Interior Protection Products ................. 382 Studding Equipment ....................... 385 Drains & Pumps ........................... 386 Oil Accessories ............................ 390 Air Conditioning ........................... 392 Safety Products ........................... 394 Wheel Chocks ............................. 398 Gloves .................................... 399 TIRE REPAIR MATERIALS ..............401 Tire Cabinets & Kits ........................ 397 Cements, Sealants & Patches ............... 402 Air Buffers & Drills ......................... 432 Tire Repair Tools & Accessories .............. 434 Tire Spreaders & Repair Stations ............. 452 Cabinets & Storage ....................... 456 RETREADING .......................... 460 Rasp Blades & Spacers ......................461 Retread Accessories ........................ 464 Retread Consumables ...................... 468 Tire Appearance ........................... 470 Envelopes .................................471 Tire Branding Inserts ....................... 472 MEASUREMENT CONVERSIONS ...... 473 ALPHABETICAL INDEX. . . . . . . . . . . . . . . . 474 NUMERICAL INDEX ................... 479 Ascot Supply Corporation is not responsible for inadvertent typographical errors or omissions. WARNING: For more information go to www.P65Warnings.ca.gov. BUYER'S GUIDE SUPPLY CORPORATION TABLE OF CONTENTS

One Call. Full Shop. No Headaches. Outfitting your shop shouldn’t feel like a scavenger hunt. With Coats, it doesn’t. Stop juggling vendors. Coats has your full shop covered — tire changers, balancers, lifts, aligners, and more. Build Your Bay Built for speed. Easy to train on. Backed by real support. Whether you run one location or ten, we make it simple: one call, zero stress. For more information visit coatscompany.com or call us at 800-688-6359

AIR SYSTEMS Air Compressors Inflation Systems Filters, Regulators & Lubricators Hose Reels & Accessories Air Line Couplers & Plugs Hose Adapters Clamps

15 AIR SYSTEMS ADVANTAGE SERIES The Advantage Series is a fully packaged unit with all of the additional accessories customers need included. Advantage series compressors are typically shipped from the factory in 24 hours or less. Compressors are shipped ready to install and operate. Each new assembled unit comes with a standard three-year standard warranty, with option for a six-year extended warranty with the purchase of an extended warranty kit. RECIPROCATING AIR COMPRESSOR • 5-25 HP • MAXIMUM PRESSURE: Up to 175 PSIG • 17.0 to 203.6 ACFM at 175 PSIG • Two Stage, Splash Lubricated • Tank-Mounted, Simplex and Duplex Models • Vertical or Horizontal Configurations • Package comes standard with up to six pre-installed options • Factory filled with ChampLub lubricant • Control panel with control voltage transformer, hourmeter, and test-off-auto switch 101-41112 HEAVY DUTY SIMPLEX & DUPLEX MODELS SHIPPED QUICKLY ASCOT NO. MFG. NO. HP OR HPD 101-00058 101-00078 101-00158 101-01012 101-11012 101-40780 101-40781 101-40782 101-40783 101-41012 101-41112 101-42112 101-44112 101-41512 101-42512 101-43512 101-44512 VR5-8 VR5-8 VR5-8 VR5-8 VR5-8 VR7F-8 VR7F-8 VR7F-8 VR7F-8 VR10-12 VR10-12 HR10-12 HR10-12 HR15-12 HR15-12 HR25-12 HR25-12 5 5 5 5 5 7.5 7.5 7.5 7.5 10 10 10 10 15 15 25 25 * V: Vertical, H: Horizontal Configuration PART NO. ADVA-S01 ADVA-S05 ADVA-S126 ADVA-S03 ADVA-S148 ADVA-S168 ADVA-S13 ADVA-S17 ADVA-S15 ADVA-S21 ADVA-S19 ADVA-S25 ADVA-S23 ADVA-S33 ADVA-S31 ADVA-S37 ADVA-S35 PUMP MFG. NO. R-15B R-15B R-15B R-15B R-15B R-15B R-15B R-15B R-15B R-30D R-30D R-30D R-30D R-40A R-40A R-70A R-70A TANK VOLTS 230/1 208/3 230/1 230/3 230/3 208/1 230/1 208/3 230/3 208/3 230/3 208/3 230/3 208/3 230/3 208/3 230/3 CAPACITY (GAL.)* 80V 80V 80V 80V 80V 80V 80V 80V 80V 120V 120V 120H 120H 120H 120H 120H 120H 175 PSI RATING CFM DEL’Y 17.0 17.0 17.0 17.0 17.0 22.3 22.3 22.3 22.3 33.8 33.8 33.8 33.8 54.1 54.1 90.7 90.7 RPM 737 737 737 737 737 949 949 949 949 718 718 718 718 776 776 776 776 DIMENSIONS (LXWXH) 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 43 x 30 x 81 43 x 30 x 81 71 x 32 x 55 71 x 32 x 55 73 x 36 x 62 73 x 36 x 62 74 x 36 x 65 74 x 36 x 65 APPROX. SHIP WEIGHT (LBS.) 590 590 590 590 590 630 630 630 630 895 895 895 895 1210 1210 1557 1557

AIR SYSTEMS DUPLEX AIR COMPRESSORS FULLY PACKAGED COMPRESSORS: Compressors equipped with all of the desired options such as Mounted Control Panel, Low Oil Level Monitor, Automatic Tank Drain, Air-Cooled Aftercooler and Vibration Isolators. DUPLEX FULLY PACKAGED COMPRESSORS: Compressors and accessories supplied in one package provides the flexibility of single operations, alternating between compressors, or duplex operations to meet high air demands • INCLUDES: Automatic Tank Drain, Vibration Isolators, Mounted Control Panels plus alternator, Low Oil Level Monitors and Air Cooled Aftercoolers. CHAMPION PREMIUM EXTENDED WARRANTY KITS AVAILABLE 6-year premium warranty kits for all Advantage Series compressor packages that utilize R-Series pumps. When purchasing one of these compressor packages, simply order the premium warranty kit that corresponds with the correct package, register your compressor and receive an additional 3 years of warranty protection on your compressor pump. These kits include enough service items for 6 oil and filter changes. The kits will utilize their Champlub synthetic oil. ASCOT NO. 101-51120 101-53120 101-54120 101-75120 101-75320 101-75420 101-10325 MFG. NO. HR5D-12 HR5D-12 HR5D-12 HR7D-12 HR7D-12 HR7D-12 HR10D-25 HP 5 5 5 7.5 7.5 7.5 10 VOLTAGE/PHASE 230/1 208/3 230/3 230/1 208/3 230/3 230/3 TANK SIZE 120 120 120 120 120 120 250 TANK CONFIG. PUMP MFG. NO. Horiz. Horiz. Horiz. Horiz. Horiz. Horiz. Horiz R-15B R-15B R-15B R-30D R-30D R-30D R-30D ACFM @175 PSIG 34.6 34.6 34.6 51.6 51.6 51.6 69.6 ACAC STD STD STD STD STD STD STD ADVANTAGE SERIES 16 CHAMPION GASOLINE AIR COMPRESSORS • Truck Bed Mountable, ideal for Field Service Applications • Heavy Duty Two-Stage Compressors • V-Belt Drive with Totally Enclosed Belt Guard • Centrifugal unloader for loadless start prolongs motor life • Gasketless Design • Vibration Isolators Included on 30 gallon models • Each new assembled unit comes with a three-year standard warranty, six-year extended warranty ASCOT NO. MFG. NO. DESCRIPTION KITS 106-37831 CC1137831 KOHLER KIT: Maintenance Kit for 14HP Kohler Engine Gasoline Air Compressor. Includes: Prefilter, air filter, spark plug, fuel filter, engine oil, Champion air filter and compressor oil 106-37832 CC1137832 HONDA KIT: Maintenance Kit for 13HP Honda Engine Gasoline Air Compressor. Includes: Air filter, spark plug, engine oil, Champion air fliter and compressor oil ASCOT NO. 102-11530 102-11560 102-11880 102-13730 102-13760 102-13780 MFG. NO. HP OR HPD TANK SIZE 30 13 13 13 14 14 14 60 80 30 60 80 HGR7-3H HGR7-6H HGR7-8H HGR7-3K HGR7-6K HGR7-8K TANK CONFIG. Horiz. Horiz. Horiz. Horiz. Horiz. Horiz. ENGINE TYPE Honda Honda Honda Kohler Kohler Kohler ACFM @175 PSIG 23.2 23.2 23.2 23.2 23.2 23.2 RPM 1025 1025 1025 1025 1025 1025 434 500 539 434 500 539 APPROX. SHIP WEIGHT (LBS.)

17 AIR SYSTEMS RV SERIES RV-SERIES RECIPROCATING AIR COMPRESSORS • Two-stage, splash lubricated compressor pump • 5 - 15 HP • Up to 175 PSIG • 17.3 - 49 ACFM at 175 PSIG rating • Tank mounted, vertical or horizontal configuration • Automatic start/stop operation • Factory filled with ChampLub AC lubricant • Mounted Magnetic Starters standard on all Centurion II models (Except for 5 HP models with 3450 RPM motors) MOUNTED MAGNETIC STARTER 175 PSI RATING* ASCOT NO. MFG. NO. HP 101-65801 101-67581 101-67514 101-67583 101-67515 7.5 7.5 7.5 TANK SIZE PUMP MFG NO. 120 RV-30A 80 RV-15A 120 RV-30A RPM 101-61212 HRV10-12 10 120 RV-30A 101-61081 VRV10-8 10 80 RV-30A 975 570 570 570 699 699 699 CFM DISPL. VRV5-8 **5 80 RV-15A 715 20.8 VRV7F-8 **7.5 80 RV-15A HRV7-12 VRV7-8 VRV7-12 101-61012 VRV10-12 10 120 RV-30A 101-61512 HRV15F-12 15 120 RV-30A 1020 101-61513 VRV15F-12 15 120 RV-30A 1020 RATING CFM DEL’Y 16.5 28.6 22.1 31.9 31.9 31.9 40.7 40.7 40.7 59.5 59.5 24.0 24.0 24.0 32 32 32 46.8 46.8 DIMENSIONS (LXWXH) 33" x 26-5/8" x 76" 33" x 26-5/8" x 76" 72.5" x 24" x 54" 33" x 26-5/8" x 76" 42.5" x 30" x 79" 72.5" x 24" x 54" 42.5" x 30" x 66.75" 42.5" x 30" x 79.75" 72.5" x 24" x 54" 46-3/8" x 30" x 79.75" *Units tested in accordance with CAGI/PNEUROP Acceptance Test Code PH2CPTC2 APPROX. SHIP WT. (LBS.) 530 595 820 595 820 890 675 910 960 980 **Available with either 1750 or 3450 RPM. Starter not required for 5HP 3450RPM motor. Starter required for 7.5HP 3450RPM motor. 101-65801 RV SERIES | 13 HP RECIPROCATING COMPRESSOR/GENERATOR • Two-stage splash lubricated RV15A compressor pump • Honda GX390 engine with electric start • Industrial 4000-watt generator with (2) 120V, 15 amp and (1) 240V, 20 amp receptacles • Twin 4-gallon horizontal air receiver tanks • Manual receiver drain valve • Lifting hook • Belt drive with totally enclosed belt guard • Gas pilot valve • Comprehensive base plate • INCLUDES: (2) Pressure gauges - the left gauge indicates tank pressure and the right gauge indicates output pressure; adjustable pressure regulator; pressure relief valve, air socket 101-73904 GAS CONTINUOUS ASCOT NO. MFG. NO. PART. NO. ENGINE MODEL 101-73904 HGRV7-LPH-G CC1153480 HONDA GX390 HP 13 TANK CAP. (GAL) (2) 4 PUMP MFG NO. RV-15A GENERATOR WITH COMP OFF-LOAD 3500 watts MAX. AC OUTPUT RPM 4000 watts 784 CFM DISPL. 22.9 175 PSI RATING* RATING CFM DEL’Y 17.9 DIMENSIONS (LXWXH) 46" x 22" x 35" APPROX. SHIP WEIGHT (LBS.) 490

AIR SYSTEMS REVOLUTION COMPRESSORS REVOLUTION: QUIET ENCLOSED RECIPROCATING AIR COMPRESSORS • Sound levels as low as 63dBA • 12-gauge steel enclosure • Large cooling fan with open cabinet design promotes cooling air flow and ease of maintenance • Separate inner base reduces vibration and noise • Oil-site gauge and filter maintenance indicator provide notification of routine maintenance • Innovative Belt-tensioning system • Oversized air cooled aftercooler standard on the package LOW SOUND LEVELS ASCOT NO. MFG. NO. 101-58000 HQR5-8 101-78000 HQR7F-8 HP 5 7.5 TANK CONFIG. LONG LIFE TANK CAP. (GAL.) Horiz. 80 Horiz. 80 PUMP MFG. NUMBER R15 734 R15 990 RPM APPROX. SHIP WEIGHT (LBS.) 1285 Lbs. 1312 Lbs. 101-58000 18 RECIP AIRSTATION PACKAGES • R-Series Airstations offer the customer the ability to purchase a complete plug-n-play reciprocating compressor package with a mounted refrigerated air dryer • Available on 2hp-15hp simplex, horizontal tank mount packages • Standard installed features included XCNC non-cycling refrigerated dryer, 3 way bypass valve, pre-filter, air cooled aftercooler, mounted control panel, low oil stop control, and electronic automatic tank drain 101-30691 ASCOT NO. MFG. NO. 101-30691 101-30692 101-30693 101-30694 101-30695 101-30696 101-30697 101-30698 101-30699 101-30700 101-30701 101-30702 101-30703 101-30704 101-30705 101-30706 HR5-8 R2-30A-S691 HR5-8 R2-30A-S692 HR5-8 R2-30A-S693 HR5-8 R2-30A-S694 HR5-8 R2-30A-S695 HR7F-8 R2-30A-S696 HR7F-8 R2-30A-S697 HR7F-8 R2-30A-S698 HR7F-8 R2-30A-S699 PART NO. PUMP MFG. R15 R15 R15 R15 R15 R15 R15 R15 R15 HR7F-8 R2-30A-S700 R15 HR10-12 R2-30A-S701 R30 HR10-12 R2-30A-S702 R30 HR10-12 R2-30A-S703 R30 HR15F-12 R2-30A-S704 R30 HR15F-12 R2-30A-S705 R30 HR15F-12 R2-30A-S706 R30 VOLTS 208/1 230/1 208/3 230/3 460/3 208/1 230/1 208/3 230/3 460/3 208/3 230/3 460/3 208/3 230/3 460/3 TANK CAPACITY (GAL.) 80 80 80 80 80 80 80 80 80 80 120 120 120 120 120 120 175 PSI RATING CFM DEL'Y 17.0 17.0 17.0 17.0 17.0 22.3 22.3 22.3 22.3 22.3 33.8 33.8 33.8 48.7 48.7 48.7 RPM 737 737 737 737 737 949 949 949 949 949 718 718 718 DIMENSIONS (LxWxH) 75x35x50 75x35x50 75x35x50 75x35x50 75x35x50 75x35x50 75x35x50 75x35x50 75x35x50 75x35x50 83x36x55 83x36x55 83x36x55 1034 83x36x55 1034 83x36x55 1034 83x36x55 APPROX. SHIP WEIGHT (LBS.) 780 780 780 780 780 855 855 855 855 855 1071 1071 1071 1178 1178 1178 QR CODE APPLICATION CHART

19 AIR SYSTEMS D-SERIES & AIR DRYERS 101-71023 D-SERIES ROTARY SCREW AIR COMPRESSORS The Champion D-Series Rotary Screw Compressors are highly competitive, expertly-designed packages that use the latest design techniques to give you industry-leading reliability, performance, and value. When used in 100% duty cycle applications, Rotary Screw compressors from Champion are a great, quiet alternative to a reciprocating compressor. STANDARD FEATURES: • Advanced but simple package design lowering maintenance and service costs and lengthening service life • Belt-driven • Integrated Airends ensure superior serviceability • Available in fixed and variable speed • State-of-the-art dual position governor controller • High-quality, sound -insulating enclosure panels • Low-noise, thermostatically-controlled, motor-driven fan • Tank or basemount with optional dryer configurations (AirStation) • Auto tank drain on Air Station • D- SERIES WARRANTY: Standard one-year warranty on package, premium five-year warranty available 105-00750 REFRIGERATED AIR DRYERS REFRIGERATED AIR DRYERS - SPECIAL FEATURES: • Effective moisture removal at all flow rates • Optional pre and post filtration available for dryer ASCOT NO. MFG. NO. 105-00015 105-00025 105-00035 105-00050 105-00075 • Ideal for air compressors equipped with an air cooled aftercooler FLOW VOLTAGE CGD15A1 15 CGD25A1 25 CGD35A1 35 CGD50A1 50 CGD75A1 75 105-00100 CGD100A1 100 105-00125 CGD125A1 125 105-00150 CGD150A1 150 115/1 115/1 115/1 115/1 115/1 115/1 115/1 115/1 IN/OUT CONNECT. 3/8" OD 3/4" 3/4" 3/4" 1" 1" 1" 1" SIZE (LXWXH) 15x13x13 22x16x15 22x16x15 22x20x20 24x15x33 24x15x33 24x15x33 24x15x37 APPROX. SHIP WEIGHT (LBS.) 69 88 92 101 123 129 135 148

AIR SYSTEMS LV/LVR-SERIES AIR COMPRESSORS LV/LVR-SERIES COMPRESSORS The LV/LVR Series range of compressors is engineered to meet highly stringent specifications. Their compact, simple, robust, and integrated design allows them to fit anywhere undercover. They are easy to maintain and install and are extremely quiet. The LV/LVR Series is available in either tripod or tank mounted versions. They are designed for a wide variety of applications including automobile, and car body shops. • 2-15hp • Less than 3 ppm Oil Carryover • Available as Airend Only, Compressor/Motor, Tank Mounted Simplex/Duplex, or hypac total system (compressor+Tank+dryer) • HOA switch and hour meter • Slow Speed: 1760 rpm (60 Hz) • 100% Duty Cycle • Continuous Run or Start/Stop • TEFC Motor • Direct Drive • Up to 100,000+ operating hours due to its simple integral design • Delivering quality pulse free air with automatic regulation • Low speed, direct drive, minimal stresses, and no roller bearings to replace • Quiet in operation and can be located at the point of use • Air intake modulation produces only the air you require LV-Series: Duplex CHAMPION MAINTENANCE PARTS LV-Series: Simplex • Complete packages or separate air ends • Reduced Energy Venting System (REVS) for lower off-load power consumption • Easy and cost competitive maintenance • 10 year Platinum™ extended warranty program 20 CHAMPION VOLTAGE CONVERSION KITS • If 460V, 3 phase service is needed v conversion kits are available ASCOT NO. MFG. NO. 106-28530 106-89090 106-94730 117-05050 117-05051 106-11882 M2853 P08909A P09479A P05050A P05051A Z11882 106-11883 106-11884 106-13194 106-00519 Z11883 Z11884 CC1031194 M519C DESCRIPTION Pilot Unleader Valve for Gas Compressors Champion Oil, 1-Gallon Champion Oil, 1-Quart Filter Element for Gas and Small Electric Units Filter Element for Large Electric Units Compressor Service Kit for RV-15/R-15 Pump INCLUDES: Lubricant, Air Filters & Oil Filter Compressor Service Kit for RV-30/R-30 Pump INCLUDES: Lubricant, Air Filters & Oil Filter Compressor Service Kit for R-40 Pump INCLUDES: Lubricant, Air Filters & Oil Filter Engine Maintenance Kit for 13 HP Gas Compressors Replacement 1/4 NPT Gauge for Compressors 106-11727 ASCOT NO. MFG. NO. 106-11727 106-11728 106-11729 106-11730 DESCRIPTION TEN011727 TEN011728 TEN011729 TEN011730 Voltage Conversion Kit, Simplex – 5HP and 7.5HP from 230V/3 Phase to 460V/3 Phase Voltage Conversion Kit, Simplex – 10HP from 230V/3 Phase to 460V/3 Phase Voltage Conversion Kit, Simplex – 15HP from 230V/3 Phase to 460V/3 Phase Voltage Conversion Kit, Simplex – 25HP from 230V/3 Phase to 460V/3 Phase

21 AIR SYSTEMS C-AIRE COMPRESSORS C-AIRE SIMPLEX COMPRESSORS • Oversized after coolers remove over 60% of water vapor, humidity or moisture • Large displacement 3-cylinder pumps run slower thus increasing the longevity and contributes to them being quieter • ALL UNITS INCLUDE: Ball valve, tank drain, oil drain tube, full synthetic oil, large sight glass and liquid fill gauge • Installation kit only included with Fully Packaged units (4 mounting pads, 4 anchor bolts, 12" steel braided flex hose) 101-75080 ASCOT NO. MFG. NO. HP STAGE 101-50080 A050V080-1230 5 101-75080 A075V080-1230 7.5 2 2 CFM @175 PSIG 17 24 PUMP 2 Cylinder Cast Iron 3 Cylinder Cast Iron PUMP RPM 649 MAIN BEARINGS 885 50,000 Hours 50,000 Hours OIL Full Synthetic Full Synthetic VOLTS 208/230, 1 Phase 208/230, 1 Phase AMPS 21@208V, 19.1@230V 33.3@208V, 31.3@230V MOTOR RPM BREAKER SIZE 1745 40 Amp 1760 50 Amp TANK SIZE (GAL.) 80 80 DIMENSIONS (LXWXH) 35" x 24" x 70" 34" x 24" x 73" WT. (LBS.) 515 625 C-AIRE GAS ENGINE COMPRESSOR • Two-Stage compressor that is just the right size for a service truck using a 1" or 3/4" impact wrench and is great for farm service use • INCLUDES: Ball valve, Honda engine, electric start, engine idle down, oil drain tube, tank drain, large displacement 3 cylinder pumps, large oil sight glass, liquid filled gauge, full synthetic oil & mounting pads GAS ENGINE TWO STAGE 102-13030 ASCOT NO. MFG. NO. 102-13030 HP A130H030-G 13 STAGE CFM @175 PSIG 2 26 PUMP 3 Cylinder Cast Iron PUMP RPM MAIN BEARINGS 50,000 Hours 745 OIL Full Synthetic MOTOR RPM 800 TANK SIZE (GAL.) 30 DIMENSIONS (LXWXH) 42" x 17" x 45" WT. (LBS.) 474

AIR SYSTEMS SAYLOR-BEALL COMPRESSORS TWO STAGE VERTICAL TANK AIR COMPRESSORS • Saylor Beall industrial two stage industrial air compressors are built with either an electric motor or engine driven option • All Saylor-Beall reciprocating air compressors are proudly USA made and rank among the best air compressors in the industry • Performance packages include aftercooler, start, low oil control, auto tank drain, vibro isolators, new quite intake filter, dual control on 15-30 HP GAS Approx. TANK CAP. Ascot No. 101-73580 Mfg. No. VT-735-80-FP-1 101-74580 VT-CH-745-80-FP 101-73581 VTCH735-80-1 (GAL) 80 80 80 CFM Displ. 17.3 26.2 17.3 Ship Weight (Lbs.) 648 915 648 101-73580 22 GAS ENGINE DRIVEN AIR COMPRESSORS • Kohler engine standard • For use where electricity is unavailable • Fuel efficient engine idle control • Compact design • Dual starting capacity • Honda engine option available • Regional specifications available 101-00743 101-75314 GAS Ascot No. 101-00743 101-07431 Mfg. No. UL-743-H UL-PL-743-CA-H ENGINE MODEL HP Honda Honda 11 11 TANK CAP. (GAL) 30 30 Ascot No. 101-75314 Mfg. No. UL-753-14 GAS ENGINE MODEL HP Kohler Gas. ASME 14 TANK CAP. (GAL) 30

23 AIR SYSTEMS BRANICK NITROGEN INFLATION SYSTEMS BRANICK 485 NITROGEN INFLATION SYSTEM • The 485 is totally automatic and completely mobile, enabling the operator to wheel the unit directly to any vehicle • Zero installation costs • No electrical requirements to operate • Industrial grade HD battery • Efficient membrane • Low maintenance cost • Connect to any air-line and you’re inflating tires. Plug and Play! ASCOT NO. MFG. NO. 119-00485 119-00685 485 685 DESCRIPTION Branick 485 Nitrogen Inflation System - Passenger Branick 685 Nitrogen Inflation System - SUV/Light Truck BRANICK 130 NITROGEN INFLATION SYSTEM The MODEL 130 can be used with a nitrogen bottle or connected to a nitrogen generator to inflate up to 6 (4 hoses included) tires with high purity nitrogen. The integrated auto-inflator has a pressure range up to 145 psi and performs top-offs as well as automated nitrogen conversions, just set the pressure and the inflator does the rest. Branick equipment lasts and our Model 130 is no different, with all steel construction to take everyday use. The rechargeable battery has a visible charging indicator to let you know when you’re ready to go. The mobility and features of the Model 130 make nitrogen service simple, fast and economical. • Hands Free Auto-inflator • Convert up to 6 tires (requires 2 optional hoses) • Rechargeable battery with indicator • Convenient parts tray • Durable all-steel construction 119-00485 VALVE CAPS FOR NITROGEN INFLATED TIRES 468-00207 ASCOT NO. MFG. NO. 468-00307 468-00607 468-10100 468-17492 468-20695 TS-OR NITSLV VC10 17-492LG 20695 DESCRIPTION 468-00207 Cap PG Green Plastic Nitrogen Cap Green Valve O-ring Nitrogen Sleeve Blue Plastic Nitrogen Caps (100/Box) Green Plastic Cap for Long Sleeve TPMS Snap-in Valves Green Plastic Nitrogen Cap with Long Skirt for 20008 Snap-in TPMS Valve (100/Box) 468-26541 468-43607 468-59019 ASCOT NO. MFG. NO. 119-00130 130 DESCRIPTION Branick 130 Nitrogen Inflation System 468-59021 6541N-2 436075 59-0019 59-0021 Dill Double Seal Cap with Green Sleeve High Quality Green Stamped Chrome Aluminum Nitrogen Valve Cap (100/Box) Chrome Nitrogen Valve Cap (100/Box) 468-43607 468-10100 468-59019 468-00607 468-00307

AIR SYSTEMS FILTERS, REGULATORS & LUBRICATORS ELECTRIC AUTOMATIC COMPRESSOR DRAIN • Automatically drains filters, compressor tanks, drip legs, aftercoolers and receivers • Opens and closes valve in 1 to 60 minute cycle times and 1 to 30 second blow down time • 1/4" NPT connection • Includes Y-strainer ASCOT NO. MFG. NO. 117-05702 5702S DESCRIPTION Electric Automatic Compressor Drain MINI IN-LINE DISPOSABLE DESICCANT DRYER • Point-of-use, patented, disposable, mini in-line desiccant dryer removes water vapor, oil vapor and dirt • Point-of-use on blow guns or spray guns as final protection for critical parts during blow off and paint spraying • See-through housing shows desiccant bead color change from blue to pink indicating dryer needs to be replaced • 1/4" NPT connection ASCOT NO. MFG. NO. 117-00010 DFD-10 DESCRIPTION QTY. Disposable Desiccant Dryer 2 117-00010 HOW TO DETERMINE THE GALLONS OF WATER ACCUMULATED PER 8 HOURS OF USE Follow the steps below to determine the gallons of water accumulated by a compressed air system per 8 hours of use: 1. Determine the ambient temperature (outside temperature surrounding the dryer) and relative humidity. 2. Locate ambient temperature in first column of water factor chart. 3. Follow the row over to percent of humidity. This indicates the number of gallons accumulated by your air compressor in an 8-hour period. 4 Select the SCFM requirement for your dryer based on the SCFM coming out the air compressor 5 Once the correct HP rating has been selected based on the air volume requirements, you will need to know the type of available electric service to determine the need for a single phase or three phase compressor. Ambient Air Temperature 120°F 110°F 100°F 90°F 80°F 70°F 60°F 50°F 40°F 30°F 20°F 10°F 20% Humidity 18.6 14.1 10.5 7.8 5.7 3.9 2.7 2.1 1.2 .9 .6 .3 30% Humidity 27.9 21.0 15.6 11.4 8.4 6.0 4.2 3.0 2.1 1.2 .9 .5 40% Humidity 50% Humidity 46.5 35.1 26.1 19.2 13.8 9.9 6.9 4.8 3.3 2.1 1.5 .8 60% Humidity 55.8 42.0 31.2 23.1 16.8 12.0 8.4 6.0 3.9 2.7 1.7 1.0 70% Humidity GALLONS OF WATER PER 8 HOURS @ 100 SCFM 37.2 27.9 20.7 15.3 11.1 7.8 5.7 3.9 2.7 1.8 1.2 .7 65.1 48.9 36.6 26.7 19.5 13.8 9.9 6.9 4.8 3.0 1.9 1.2 80% Humidity 74.4 55.8 41.7 30.6 22.2 15.9 11.1 7.8 5.4 3.6 2.1 1.4 90% Humidity 83.7 63.0 46.8 34.5 24.9 18.0 12.6 8.7 6.0 3.9 2.4 1.5 100% Humidity 93.0 69.9 52.2 38.4 27.9 19.8 14.1 9.9 6.6 4.5 2.7 1.8 Water factor chart number is 31.2 Compressed air system accumulates 31.2 gallons of water per 8 hours of use. EXAMPLE: 25HP air compressor delivers 100 SCFM. Ambient Temp. = 100°F Relative Humidity = 60% IN-LINE AIR TOOL FILTER • In-line filter protects air tools from dirt and debris • 1-9/16" length, 1/2 oz. • 40 micron sintered bronze element • Inlet can be attached directly to pneumatic tools • 1/4" male x 1/4" female NPT ASCOT NO. MFG. NO. 117-09132 9132 DESCRIPTION In-Line Air Tool Filter 117-09132 ASCOT NO. MFG. NO. 117-05304 DESCRIPTION T53-04W Automatic Drain 117-05304 117-05702 AUTOMATIC COMPRESSOR DRAIN • Automatically expels liquids from piping network in compressed air systems • Use in low spots in an air system where water accumulates • Float type drain features a protective stainless steel screen with umbrella baffle, providing large sump area for oil, sludge and dirt • 1/2" NPT top threaded port 24

25 AIR SYSTEMS FILTERS, REGULATORS & LUBRICATORS FILTER/REGULATOR COMBINATION UNITS • Combines filter and pressure regulator into one space saving unit • Output performance equal to an individual filter and regulator • Reduced pressure outputs of 0-125 PSIG • FEATURES THREE POSITION NON-RISING KNOB: push to lock, pull to adjust, detach to make tamper resistant • Available in metal bowl or polycarbonate bowl with metal bowl guard 114-75301 ASCOT NO. 114-75200 114-75201 114-75202 114-75203 114-75300 114-75301 114-75302 114-75303 114-00754 114-75400 114-75401 114-75402 114-75403 MFG. NO. B752T B752WT B752FW B752Z B753T B753WT B753FW B753Z B754T B754WT B754FW B754Z PIPE SIZE 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" B754GW 1/2" 1/2" 1/2" 1/2" 1/2" ADJUSTMENT TYPE T-Handle T-Handle Knob Knob T-Handle T-Handle Knob Knob Knob T-Handle T-Handle Knob Knob MAX. FLOW SCFM 50 50 50 50 80 80 80 80 100 100 100 100 100 *NOTE: Gauge not included. Sold separately. Ascot part number indicated. BOWL CAPACITY 5 Oz. 6 Oz. 6 Oz. 5 Oz. 5 Oz. 6 Oz. 6 Oz. 5 Oz. 6 Oz. 5 Oz. 6 Oz. 6 Oz. 5 Oz. BOWL TYPE Poly Metal Metal Poly Poly Metal Metal Poly Metal Poly Metal Metal Poly DRAIN Manual Manual Float Auto Piston Auto Manual Manual Float Auto Piston Auto Manual Manual Manual Float Auto Piston Auto GAUGE PART NO. 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* Included 117-01481* 117-01481* 117-01481* 117-01481* OPERATING TEMP. 40-125°F 40-175°F 40-125°F 40-125°F 40-125°F 40-175°F 40-125°F 40-125°F 40-175°F 40-125°F 40-175°F 40-125°F 40-125°F MAX. PRESSURE 150 PSIG 250 PSIG 175 PSIG 150 PSIG 150 PSIG 250 PSIG 175 PSIG 150 PSIG 250 PSIG 150 PSIG 250 PSIG 175 PSIG 150 PSIG MODULAR UNITS • UNITS INCLUDE: A filter, regulator and lubricator and/or filter, regulator and oil removing filter • Units equipped with or without OSHA safety lock-out valves • Gauge included • Screwdriver only tool needed to connect or disconnect units • Insert interlocking feature allows simple installation in any location 114-03354 ASCOT NO. 114-03352 114-13352 114-03353 114-13353 114-03354 114-13354 MFG. NO. C33352W VC33352W C33353W VC33353W C33354W VC33354W PIPE SIZE 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" MAX. FLOW SCFM 100 100 100 100 100 100 BOWL CAPACITY 6 Oz. 6 Oz. 6 Oz. 6 Oz. 6 Oz. 6 Oz. BOWL TYPE Metal Metal Metal Metal Metal Metal DRAIN Manual Manual Manual Manual Manual Manual LOCKOUT DRAIN Not Included Included Not Included Included Not Included Included OPERATING TEMP. 40-175°F 40-175°F 40-175°F 40-175°F 40-175°F 40-175°F MAX. PRESSURE 250 PSIG 250 PSIG 250 PSIG 250 PSIG 250 PSIG 250 PSIG

AIR SYSTEMS FILTERS, REGULATORS & LUBRICATORS GENERAL PURPOSE FILTERS • Removes harmful water condensate, pipe scale, dirt and rust from your compressed air system • Prevents corrosive damage to compressed air equipment and finished products • Protects components and air tools from premature failure • Installed upstream of regulators to prevent valve failure • Also used as pre-filters to oil removing and coalescing filters to ensure high efficiency and long element life in applications such as paint spraying, instrumentation and pharmaceuticals • Porous sintered bronze element 111-30002 ASCOT NO. 111-30002 111-35200 111-35201 111-35202 111-35203 111-35300 111-35301 111-35302 111-35303 111-35400 111-35401 111-35402 111-35403 111-37600 111-37601 111-32908 111-32910 111-32912 MFG. NO. F300-02 F352 F352W F352Z F352FW F353 F353W F353Z F353FW F354 F354W F354Z F354FW F376W F376FW F329-08 F329-10W F329-12W PIPE SIZE 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 1" 1-1/4" 1-1/2" COALESCING/OIL REMOVING FILTERS • Removes submicron particles, particularly oil • APPLICATIONS INCLUDE: Paint spraying, pneumatic control instrumentation, printing and protection of air bearings • For maximum efficiency, a pre-filter needs be to installed upstream of oil-removing filter • Bonded end seals eliminate aerosol leakage past the element • Inner and outer support ribs are chemical resistant and strengthen element structure • Drain layers allow filtered elements to drop to bottom of filter with barrier to prevent reentry of drops to downstream air 115-55301 ASCOT NO. 115-55200 115-55201 115-55300 115-55301 115-55400 115-55401 115-57601 115-50508 115-50810 115-50812 MFG. NO. F552FW F552W F553FW F553W F554FW F554W F576W F508-08W F508-10W F508-12W PIPE SIZE 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 1" 1-1/4" 1-1/2" MAX. FLOW SCFM 24 24 37 37 37 37 60 300 300 400 BOWL CAPACITY 6 Oz. 6 Oz. 6 Oz. 6 Oz. 6 Oz. 6 Oz. 10 Oz. 29 Oz. 60 Oz. 60 Oz. BOWL TYPE Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal DRAIN Float Auto Manual Float Auto Manual Float Auto Manual Manual Manual Manual Manual OPERATING TEMP. 40°-120°F 40°-160°F 40°-120°F 40°-160°F 40°-120°F 40°-160°F 40°-160°F 40°-160°F 40°-160°F 40°-160°F 115-57601 MAX. PRESSURE 175 PSIG 250 PSIG 175 PSIG 250 PSIG 175 PSIG 250 PSIG 250 PSIG 250 PSIG 250 PSIG 250 PSIG FILTER ELEMENT .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron MAX. FLOW SCFM 27 48 48 48 48 75 75 75 75 100 100 100 100 230 230 300 400 425 BOWL CAPACITY 1 Oz. 5 Oz. 6 Oz. 5 Oz. 6 Oz. 5 Oz. 5 Oz. 6 Oz. 6 Oz. 5 Oz. 6 Oz. 5 Oz. 6 Oz. 10 Oz. 10 Oz. 29 Oz. 29 oz. 29 oz. BOWL TYPE Poly Poly Metal Poly Metal Poly Metal Poly Metal Poly Metal Poly Metal Metal Metal Metal Metal Metal DRAIN Manual Manual Manual Piston Auto Float Auto Manual Manual Piston Auto Float Auto Manual Manual Piston Auto Float Auto Manual Float Auto Manual Manual Manual 111-35201 OPERATING TEMP. 40°-125°F 40°-125°F 40°-160°F 40°-125°F 40°-120°F 40°-125°F 40°-160°F 40°-125°F 40°-120°F 40°-125°F 40°-160°F 40°-125°F 40°-120°F 40°-160°F 40°-120°F 40°-160°F 40°-160°F 40°-160°F MAX. PRESSURE 150 PSIG 150 PSIG 250 PSIG 150 PSIG 175 PSIG 150 PSIG 250 PSIG 150 PSIG 175 PSIG 150 PSIG 250 PSIG 150 PSIG 175 PSIG 250 PSIG 175 PSIG 250 PSIG 250 PSIG 250 PSIG 111-32908 FILTER ELEMENT 20 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 26

27 AIR SYSTEMS FILTERS, REGULATORS & LUBRICATORS REGULATORS • Specialized control valve reduces upstream supply pressure level to a specified constant downstream pressure • Regulates air pressure of the airline • Self-relieving style units • Available in T-handle or adjustment knob • Adjustment knob features three position non-rising knob: push to lock, pull to adjust, detach to make tamper resistant • Reinforced diaphragm for repeated accuracy 112-00378 ASCOT NO. 112-00162 112-00262 112-00352 112-00353 112-00354 112-00376 112-00378 112-03910 112-03912 112-01352 112-01354 MFG. NO. R162 R262** R352 R353 R354T R376T R378T R3910 R3912 R352T R354GH PIPE SIZE 1/4" 1/4" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" MAX. FLOW SCFM 25 25 50 80 100 220 250 700 700 ADJUSTMENT TYPE Adjustment Knob Adjustment Knob Adjustment Knob Adjustment Knob T-Handle T-Handle T-Handle T-Handle T-Handle PRESSURE GAUGE PART NO. 117-01681* 117-01681* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 112-00352 GAUGE PART 1/8" NPT 1/8" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT 1/4" Regulator - T-Handle 1/2" High Pressure Regulator - 10 to 250 PSI 112-00262 OPERATING TEMP. 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F OPERATING PRESSURE 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG LUBRICATORS • Injects a fine stream of oil into the air stream to automatically lubricate air operated tools and other devices • Extends life of downstream components • Precise control of oil feed with needle valve adjustment knob • Adds minimal pressure drop to the air system • Features three position non-rising knob: push to lock, pull to adjust, detach to make tamper resistant • High air flow • Precise visual adjustment control • Low flow to establish drip rate • “W” is with sight glass and metal bowl 113-00353 ASCOT NO. MFG. NO. 113-00352 L352 113-01352 113-00353 113-01353 113-00354 113-01354 113-00376 113-04108 L352W L353 L353W L354 L376W 4108W PIPE SIZE 1/4" 1/4" 3/8" 3/8" 1/2" L354W 1/2" 3/4" 1" MAX. FLOW SCFM 16 16 82 82 142 142 142 175 BOWL CAP. 5 Oz. 5 Oz. 5 Oz. 5 Oz. 5 Oz. 5 Oz. 10 Oz. 29 Oz. BOWL TYPE Poly OPERATING TEMP. 40°-125°F Metal 40°-175°F Poly 40°-125°F Metal 40°-175°F Poly 40°-125°F Metal 40°-175°F Metal 40°-125°F Metal 40°-160°F MAX. PRESSURE 113-01353 OIL DELIVERY 150 PSIG 2 SCFM 200 PSIG 2 SCFM 150 PSIG 2 SCFM 200 PSIG 2 SCFM 150 PSIG 2 SCFM 200 PSIG 2 SCFM 150 PSIG 2 SCFM 250 PSIG 2 SCFM 117-01481 117-11481 117-01681 117-05200 1481 1481B 1681 5200 ACCESSORIES FOR FILTERS, REGULATORS & LUBRICATORS ASCOT NO. MFG. NO. 117-00055 EK55 DESCRIPTION .03 Micron Coalescing Filter Element Replacement 117-00329 117-00355 117-00935 EKF329 EK35-5 PMKR35 40 Micron Filter Element - Fits 3/4" Units 5 Micron Filter Element - Fits 1/4", 3/8" & 1/2" Units Filter/Regulator Mounting Kit 1/4" Back Mount Gauge 1/4" Back Mount Gauge - 0-300 PSI 1/8" Back Mount Gauge Internal Drain Assembly

AIR SYSTEMS HOSE REELS PREMIUM DUTY INDUSTRIAL HOSE REELS • Compact design allows reels to fit into tight locations • Corrosion resistant powder coated paint • Extended service life due to permanently lubricated bearings and swivels • Versatile applic include easy mounts on w floor, ceiling or truck • Air Water hose included • MADE IN THE USA MADE IN THE USA • Compact design • Substantial support • Air/Water (OLP), Oil (OMP) or Grease (OHP) • All-steel construction with engineered ribs/ forms • Baked-on powder coat finish provides corrosion resistance • MADE IN THE USA ASCOT NO. 124-04435 125-04625 125-05450 125-05635 125-05650 126-05850 MFG. NO. 4435 OLP 4625 OLP 5450 OLP 5635 OLP 5650 OLP A5850 OLP HOSE ID 1/4" 3/8" 1/4" 3/8" 3/8" 1/2" HOSE OD 0.475 0.600 0.475 0.600 HOSE LENGTH 35' 25' 50' 35' 0.600 50' 0.750 50' HOSE PSI TEMP. 300 150˚F 300 150˚F 300 150˚F 300 150˚F 300 150˚F 300 150˚F ASCOT NO. 125-07650 125-07670 126-07850 125-07651 126-07851 124-07450 125-07652 MFG. NO. 7650 OLP 7670 OLP 7850 OLP 7650 OMP 7850 OMP 7450 OHP 7650 OHP HOSE ID 3/8" 3/8" 1/2" 3/8" HOSE OD HOSE LENGTH 0.600 50' 0.600 0.750 0.690 1/2" 0.820 1/4" 3/8" 0.580 0.730 70' 50' 50' 50' 50' 50' ULTIMATE DUTY INDUSTRIAL HOSE REELS MEDIUM DUTY INDUSTRIAL HOSE REELS • Adjustable guide arm locates to seven positions • Oversized main shaft increases support • Long life drive spring • Easy to mount due to slotted mounting holes for safer and easier installation • Air/Water hose included • MADE IN THE US MADE IN THE USA • Robust, dual pedestal base mounts to any load-bearing surface – built for maximum durability and offers performance and longevity in the harshest conditions • Five-in-one, heat treated aluminum casting saves space and eliminates leaks • Up to four guide arm locations • Two sealed ball bearings for smooth rotation of the main shaft • Versatile reel inlet can be connected to the fluid source on the right or left side • Base plate constructed from 7 gauge steel, upright and guide arm are 11 gauge steel, and the spool is 16 gauge steel • MADE IN THE USA MADE IN THE USA HOSE PSI HEAVY DUTY INDUSTRIAL HOSE REELS MADE IN THE USA 28 TEMP. 300 150˚F 300 150˚F 300 150˚F 2600 210˚F 3000 210˚F 5000 210˚F 4800 210˚F ASCOT NO. 124-04500 125-06350 125-06500 126-08500 MFG. NO. RT450-OLP RT635-OLP RT650-OLP RT850-OLP HOSE ID 1/4" 3/8" 3/8" 1/2" HOSE OD 0.475 0.600 HOSE LENGTH 50' 35' 0.600 50' 0.750 50' HOSE PSI TEMP. 300 150˚F 300 150˚F 300 150˚F 300 150˚F ASCOT NO. 126-82100 126-83050 126-83051 126-84050 MFG. NO. 82100 OLP 83050 OLP D83050 OLP D84050 OLP HOSE ID 1/2" 3/4" 3/4" 1" HOSE OD 0.750 1.075 1.075 1.375 HOSE LENGTH 100' 50' 75' 50' HOSE PSI 300 250 250 250 TEMP. 150° F 150° F 150° F 150° F

29 AIR SYSTEMS HOSE REELS HEAVY DUTY MOBILE BASE HOSE REELS • Designed to accommodate up to 100' of 3/8" I.D. hose or 75' of 1/2" I.D. hose • Slightly more robust than the standard 7000 series hose reels • The heavy duty base design, all steel construction and a baked-on powder coat finish combine to produce a rugged, corrosion-resistant product • A newly redesigned latching mechanism provides longer servic of the latch components • The-one piec guide roller design and stainles offer greater strength and easier servic ty • The high quality, die cast aluminum hub and two sealed ball bearings produce a smoother spool rotation and easier operation • MADE IN THE USA ASCOT NO. 125-76050 125-76070 125-76075 125-76100 126-78050 126-78075 MFG. NO. HD76050 OLP HD76070 OLP HD76075 OLP HD76100 OLP HD78050 OLP HD78075 OLP GENERAL INDUSTRIAL AIR/WATER • Full flow swivel and heavy gauge steel frame • Allbolted unitized construction with no welds to fatigue • Hand Crank (CA) and 12VDC Electric Motor (EA) driven • MADE IN THE USA *HOSE NOT INCLUDED ASCOT NO. 126-21120 126-21121 126-31120 126-31121 126-31180 MFG. NO. CA32112 L EA32112 L12D CA33112 L EA33112 L12D CA33118 L HOSE ID 1/2” 1/2” 3/4” 3/4” 3/4” HOSE OD 0.750 0.750 1.075 1.075 1.075 HOSE ID 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" HOSE OD HOSE LENGTH 0.600 50' 0.600 0.600 70' 75' 50' 75' HOSE PSI 300 300 300 0.600 100' 300 0.750 0.750 300 300 MADE IN THE USA HEAVY DUTY CONTROLLED RETURN HOSE REELS • The centrifugal clutch, integral to the reel base, greatly decelerates the hose retraction speed by up to 83% vs. a Series 7000 reel • Retracts at 2 miles per hour – designed to match the average human walking speed of 2 to 3 miles per hour • Integral clutch creates a consistent retraction speed regardless of fluid or environmental temperatures • Safely protects personnel and equipment • Requires no field adjustment •MADE IN THE USA ASCOT NO. 125-07850 TEMP. 150° F 150° F 150° F 150° F 150° F 150° F MADE IN THE USA 125-07670 125-07650 125-07925 126-07450 126-07650 MFG. NO. RS7850 OLP RS7670 OLP RS7650 OLP RS7925 OLP RS7450 OHP RS7650 OHP DUAL PEDESTAL HOSE REELS • Compact dual pedestal design • Features an innovative, noninterlocking base • Stand up t vibration, ideal for truck-moun applications • Dual pedestal base and guide arm are structurally r • All-steel construction and bak powder coat finish • MADE IN THE US ASCOT NO. 124-75450 125-75635 125-75650 125-77650 126-75835 126-77850 HOSE LENGTH 200’ 200’ 100’ 100’ 175’ PSI 1000 1000 1000 1000 1000 MFG. NO. DP5450 OLP DP5635 OLP DP5650 OLP DP7650 OLP DP5835 OLP DP7850 OLP HOSE ID 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" ADJUSTABLE BUMPER STOPS • Solid molded rubber assuring long life and nonslip grip • Allow desired length of hose or cord to be permanently stored outside the reel ASCOT NO. MFG. NO. 127-11004 127-11043 127-21043 127-11040 DESCRIPTION S1-HR1004 S1-HR1004-3 S2-HR1004-3 3/8" Hose, 2.5" Diameter 3/8" Hose, 3" Diameter 1/2" Hose, 3" Diameter S1-HR1004-A 1/4" Hose, 2.5" Diameter HOSE OD 0.475 0.600 HOSE LENGTH 50' 35' 0.600 50' 0.600 50' 0.750 0.750 HOSE PSI TEMP. 35' 50' 300 150˚F 300 150˚F 300 150˚F 300 150˚F 300 150˚F 300 150˚F HOSE ID 1/2" 3/8" 3/8" 3/4" 1/4" 3/8" HOSE OD 0.75 0.6 0.6 1.075 0.58 0.73 HOSE LENGTH HOSE PSI TEMP. 50' 300psi 150F 70' 250psi 150F 300psi 150F 50' 300psi 150F 25' 50' 5000psi 210F 50' 4800psi 210F MADE IN THE USA MADE IN THE USA

AIR SYSTEMS HOSE REELS CORD REELS OPEN STYLE • For indoor, non-weather-tight applications only • All models UL listed at 125 volt 60 hz single phase; reels without cord suitable for 220 volt • Cord Included • MADE IN THE USA MADE IN THE USA PRESSURE WASH HOSE REELS • Compact design and quality steel construction • Full flow swivel combines the highest grade seal design and materials with bearing ar service life • The high pr designed to handle a br of pressures, tempera chemicals • Individually powder coated components offer maximum protection fr premature corrosion • Ideal f agricultural, marine, equipmen cleaning, and pressure w applications • MADE IN THE US ASCOT NO. 312-40503 312-45453 312-45451 312-45454 MFG. NO. L 4050 163 3 L 4545 123 3 L 4545 123 3A L 4545 123 9 WIRE SIZE AWG NO. OF WIRES SINGLE OUTLET 16 12 12 TRIPLE OUTLET 12 312-45455 L 4545 123 9G (GFCI) 312-40504 L 4050 163 10 12 LED 16 FUEL DELIVERY HOSE REELS • Ideal for mobile and permanent-mount applications • Suitable for a wide variety of fuel applications including E85 (not recommended for jet fuel) • Incorporates metal forms to ensure the greatest possible strength • Latch and ratchet are made of hea • Reels ar MADE IN THE USA 3 3 3 3 3 3 CORD LENGTH 50' 45' 45' 45' 45' 50' VOLTS MAX. AMPS 125 13 125 15 125 20 ASCOT NO. 125 15 125 15 125 13 TWIN LINE GAS WELDING HOSE REELS • Designed to handle various lengths of oxygen/acetylene or T-grade twin line hose • Double sealed, special molded o-rings prevent leakage • Swivel inlets are both permanently identified with machined grooves on the gas side to assure proper installation • The aluminum dual swivel body is an exclusive Reelcraft design and is hard coated for wear resistance and assures positive separation of gases due t TW7000) • MADE IN THE US MADE IN THE USA 126-07650 126-08110 MFG. NO. PW7650 OHP PW81100 OHP MADE IN THE USA 30 HOSE ID 3/8" 3/8" HOSE OD 0.730 0.730 HOSE LENGTH 50' HOSE PSI TEMP. 4800 210° F 100' 4800 210° F ASCOT NO 126-07925 126-08305 126-08405 F7925 OLP F83050 OLP FD84050 OLP 3/4" 3/4" 1" 1.188 1.188 1.500 25' 50' 50' 50 50 50 ASCOT NO. 150° F 150° F 150° F 126-05425 126-07450 126-08410 TW5425 OLPT TW7450 OLPT TW84100 OLPT MFG. NO. ID 1/4" 1/4" 1/4" OD 0.530 0.530 LENGTH 25' 50' 0.530 100' PSI 200 200 200 TEMP. 150° F 150° F 150° F

31 AIR SYSTEMS HOSE REELS EZ-COIL HI-VIS HOSE REEL MADE IN THE • EZ-Coil controlled retraction speed up t 80% slower for greater safety • Hybrid (P + Rubber blend) bright yellow hose with a white glossy stripe for superior visibilit • Increased hose flexibility, enhanc resistance, and reduced coil memory • High quality epoxy powder coated s construction • Sturdy 1" solid steel a with 1" self-lubricated precision bearings • Steel base plate and support pos stiffness reducing vibration • Multi-position guide arm adjusts to 10 different moun positions • SH models - Single pedes features Coxreels’ exclusive Super Hub™ dual axle support system • Enclosed f tuned and matched cartridge-style spring motor • External fluid path with machined from solid brass 90° full-flow NPT s with nitrile seals • MADE IN THE U ASCOT NO. 125-03500 125-03501 125-03750 125-04500 125-04501 125-04750 MFG. NO. EZ-P-LP-350-HV EZ-SH-350-HV EZ-SH-375-HV EZ-SH-450-HV EZ-SH-475-HV HOSE ID 3/8" 3/8" 3/8” EZ-P-LP-450-HV 1/2” 1/2” 1/2” LOW PRESSURE HOSE REELS FOR AIR AND WATER • High quality epoxy powder coated steel construction • Sturdy 1" solid st axle with 1" self-lubricated precision bearings • Steel base plate and support post add stiffness reducing vibration • Multi-position guide arm adjusts to 10 different mounting positions • 8-position locking ratchet secures hose at desir length • Self-retracting spring return r • Factory balanced cartridge-style spring motor provides safe maintenance • Solid brass NPT swivel with stainless steel stud bolts to reel • MADE IN THE U.S.A. ASCOT NO. 124-13500 124-15000 124-33500 125-35004 126-42500 126-43500 126-45000 126-52500 MFG. NO. P-LP-135 P-LP-150 P-LP-335 P-LP-350 P-LP-425 SH-N-435 SH-N-450 SH-N-525 HOSE ID 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" HOSE OD 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" 1-1/16" HOSE LENGTH 35' 50' 35' 50' 25' 35' 50' 25' HOSE PSI 300 300 300 300 300 300 300 300 125-21408 HOSE OD 5/8" 5/8" 5/8” 3/4” 3/4” 3/4” MADE IN THE USA HOSE LENGTH 50' 50' 75’ 50’ 50’ 75’ USA CLASSIC LOW PRESSURE HOSE REELS he Classic Hose Reel has been the s dependability for over a decade • T eel hose reel is chosen for gener , automotive dealerships, and service garages • All Classic series hose reels includes hose, hose stop and a 2.5’ connecting hose • The ank Classic Low Pressure Hose Reel is ideal for delivery of , water, windshield wash fluid, and anti-freeze • The Classic Hose eel combines design, performanc and reliability with the right featur and benefits for your low pressure hose reel needs. • Made in USA 125-21202 T NO. MFG. NO. 125-21202 HOSE PSI 300 300 300 300 300 300 2120-020 EVOLUTION AND CLASSIC SERIES • These field-proven hose reels are preferred for general duty, automotive dealerships and independent garages • Steel base and outlet arm, provide strength and rigidity • All reels include hose OPERATING PRESSURE 300 PSI HOSE ID 3/8" HOSE LENGTH 50' ASCOT NO. MFG. NO. 125-21408 125-21410 125-21215 2140-008 2140-010 2120-015 OPERATING PRESSURE 300 PSI 300 PSI 300 PSI HOSE ID 3/8" 1/2" 3/8" HOSE LENGTH 50' 30' 50' SHIP WEIGHT 44 Lbs. 46 Lbs. 60 Lbs.

AIR SYSTEMS C-SERIES LOW PRESSURE HOSE REELS • Reels ideally suited for plant maintenance, service trucks or other industrial functions • Standard hose for air and water • Single set screw to access spring casing • Drive spring mechanism lubricated for life • One piece combination latch, spring arbor, main bearing and spool support for fewer moving parts • Durable powder coated finish • MADE IN THE US 125-35000 ASCOT NO. MFG. NO. 125-35000 125-55000 LC-350 LC-550 OPERATING PRESSURE 300 PSI 300 PSI HOSE ID 3/8" 1/2" HOSE LENGTH 50' 50' SHIP WEIGHT 54 Lbs. 60 Lbs. MADE IN THE USA COMMERCIAL GRADE AIR HOSE REELS • Heavy duty construction: Base and guide arm made of heavy gauge steel stampings with reinforced ribs • Thick steel (3/8”) wide body 8 position ratchet assures long life and secure hose lock-in • Powder coated steel components resist corrosion • Mounting base is slotted and guide arm has 5 positions for multiple mounting configurations • The swivel design, one piece solid 3” roller, strong steel latch spring and a durable retraction spring with substantial output torque mean longer service life • 50 foot hose is included • Available in a 3/8” x 50’ hose and 1/2” x 50’ hose models • 3/8” Reel: 38lbs, 1/2" Reel: 41lbs • 3/8 Model: ASC3850, 1/2 Model: ASC1250 pressure 1/4" BULK DOMESTIC AIR HOSE • Used in automotive, agricultural and construction applications • 1/4" ID x 325 PSI • Temp Range: -40°F to +200°F • Multi-spiral polyester yarn reinforcement makes hose easy to handle and very flexible • EPDM tube and cover resists abrasion, heat and ozone • MADE IN THE USA 121-14700 ASCOT NO. MFG. NO. 121-14700 DESCRIPTION 91008400 COUPLED AIR HOSES • Reinforced with hea duty polyester cord • 325 PSI • EPDM abrasion resistant cover • Bend restrictors both ends • Premium machined brass alloy fittings • -40° to +20O° F 121-01225 ASCOT NO. MFG. NO. 121-01225 121-01250 121-03825 121-03851 DESCRIPTION 98101646 98101648 98101640 98101642 Coupled 1/2" x 25’ Reinforced Domestic Air Hose Coupled 1/2" x 50’ Reinforced Domestic Air Hose Coupled 3/8" x 25’ Reinforced Domestic Air Hose Coupled 3/8" x 50’ Reinforced Domestic Air Hose ASCOT NO. MFG. NO. 125-00760 126-00761 760 761 DESCRIPTION 3/8" x 50 Air Hose Reel 1/2" x 50 Air Hose Reel 1/4" x 700’ Domestic Bulk Air Hose (325 PSI) Reel MADE IN THE USA AIR HOSE REELS • Mounting base is slotted and roller arm has 5 positions for multiple mounting configurations.• Heavy steel construction adds durability and longer life cycles • Rubber air hose with heavy-duty crimping and spring guard ensure longevity • Automatic return via heavyduty sealed spring with 8 locking stops, roller guide and ball stop • 300 PSI maximum pressure • Ship weight 40 lbs MADE IN THE USA ASCOT NO. MFG. NO. 125-03850 125-01250 DESCRIPTION ASC3850 ASC1250 3/8" x 50' Ascot Air Hose Reel 1/2" x 50' Ascot Air Hose Reel ASCOT AIR HOSE BUMPER STOPS • Long life adjustable replacement bumpers of solid molded rubber • Bumpers allow desired length of hose to be stored outside the reel • Available for 3/8” hose and 1/2" hose ASCOT NO. MFG. NO. 127-00038 127-00012 DESCRIPTION ASCHS-38 ASCHS-12 Hose Reel Stop for 3/8" Reels Hose Reel Stop for 1/2" Reels COMING FALL 2026! HOSE REELS COMING FALL 2026! 32

33 AIR SYSTEMS HOSE REELS FLEXZILLA AIR HOSES • Field Repairable – Reusable anodized aircraft aluminum fittings • Extreme all-weather flexibility, even in subzero temperatures (-40° to 140°F) • Won’t kink under pressure • Lays flat – no memory • Durable and abrasion-resistant outer cover • Max. working pressure at 70°F: 300 psi ASCOT NO. MFG. NO. 127-01425 127-01450 127-03825 DESCRIPTION HFZ1425YW2 1/4" X 25' HFZ1450YW2 1/4" X 50' HFZ3825YW2 1/4" X 25' 3/8" BLUE COIL HOSE • 25' length • 1/4" x 3/8" fittings • 150 PSI • Polyurethane tubing • Exc abrasion resistance • Highly kink-resistant, withstands twisting or crushing • Easy to handle - 25% lighter than rubber • Made in Taiwan ASCOT NO. MFG. NO. 127-03850 127-01250 127-12100 127-01425 DESCRIPTION HFZ3850YW2 1/4" X 50' HFZ1250YW4 1/4" X 50' HFZ12100YW4 1/4" X 100' ASCOT NO. MFG. NO. 137-11420 A11-420 HOSE CUTTER • Hand tool for straight, even, clean cut on heater, air conditioning and braided rubber or plastic hose up to 1-1/8" diameter ASCOT NO. MFG. NO. DESCRIPTION 137-10010 137-10011 10010 10011 BLOW GUNS ASCOT NO. MFG. NO. DESCRIPTION 123-13825 3/8x25 BLUE RE AIR HO • Highly kink twisting or crushing • S • 150 PSI • P • Excellen • Easy t than rubber 25' Blue Coil Hose - 1/4" x 3/8" Fittings - 150 PSI • Non-restricted, full pressure performance • Sturdy, high-tech composite material • Lightweight ergonomic design • Variable air flow • 1/4" Female NPT Hose Cutter (2) High Grade Carbon S Replacement Blades 137-10010 DESCRIPTION Red Handled Hose Cutter RED HANDLED HOSE CUTTER • Powder coated aluminum body • Heat treated stainless steel cutting blade • Ø3-36 mm rubber and reinforced hose cutter • Locking mechanism for safe storage 137-11420 128-72021 123-14025 123-38050 ASCOT NO. MFG. NO. 123-14012 123-14025 123-38050 123-38125 DESCRIPTION 1/4x1/4x1/4x12 1/4x1/4x1/4x25 1/4" Blue Recoil Air Hose - 1/4" x 1/4" Swivel Fittings (12' Length) 1/4" Blue Recoil Air Hose - 1/4" x 1/4" Swivel Fittings (25' Length) 3/8x1/4x1/4x50 3/8" Blue Recoil Air Hose - 1/4" x 1/4" Swivel Fittings (50' Length) 3/8x3/8x3/8x25 3/8" Blue Recoil Air Hose - 3/8" x 3/8" Swivel Fittings (25' Length) 128-72023 ASCOT NO. MFG. NO. 128-72021 128-72022 128-72023 128-72024 128-72025 NOZZLE DESCRIPTION 27202OSH Venturi Silent 27202SIL 27202PRE Standard 27202ECR 27202MTL Metal High-output, OSHA-compliant Quiet, OSHA Compliant Standard, non-Scratch Nozzle Air Shield Unique Air Shield Nozzle Durable Metal Nozzle 128-72025

AIR SYSTEMS AIR LINE COUPLERS & PLUGS TYPE A 1/4” LINCOLN LONG NOSE • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Interchange with Lincoln “Long Nose Series” as well as units produced by other manufacturers TYPE C 1/4” AUTOMOTIVE STANDARD (TRU-FLATE) • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Interchange with Tru-Flate 10 and 100 type series as well as units produced by other manufacturers • Maximum working pressure 300 PSI 34 131-61523 131-61486 ASCOT NO. 131-61486 131-61548 131-61550 131-61551 DILL. NO. N/A 123 126 125 MILTON NO. 794 790 791 792 131-61548 AMFLO. NO. C27 C28 SCHRADER NO. COUPLERS 598392 3528 ADAPTER PLUGS CP27 CP28 3531 3532 N/A B73 L2C L3C Male Female Male Female 1/4" 1/4" 1/4" 1/4" 131-61550 ASCOT NO. PARKER NO. THREAD NPT 131-61523 131-61524 131-62523 131-61539 131-61538 D-13 D-12 D-13R D-3C D-2C 785 786 787 784 783 DILL. NO. MILTON NO. AMFLO. NO. C2 C1 C2R SCHRADER NO. COUPLERS 3504 3503 3505 ADAPTER PLUGS CP2 CP1 3507 3506 13 12 N/A 3C 2C Female Male Female Female Male 1/4" 1/4" 1/4" 1/4" 1/4" PARKER NO. THREAD NPT 131-61524 131-61539 131-62523 TYPE B 1/4” ARO SERIES TYPE • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Interchange with Aro 210 series as well as units produced by other manufacturers • Maximum working pressure 300 PSI D 1/4” INDUSTRIAL INTERCHANGE SERIES • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Interchange with Aro, Foster, Milton as well as units produced by other manufacturers • Maximum working pressure 300 PSI 131-61573 131-61574 131-08888 ASCOT NO. 131-61526 131-61527 131-61529 131-61528 DILL. NO. 8888 N/A 8889 8891 MILTON NO. 775 776 778 777 SCHRADER NO. COUPLERS 3526 3525 ADAPTER PLUGS 3530 3529 131-61528 AMFLO. NO. C38 C37 CP38 CP37 THREAD Female Male Female Male NPT 1/4" 1/4" 1/4" 1/4" ASCOT NO. 131-61573 131-61574 131-61578 131-61579 DILL. NO. 102 103 110 109 MILTON NO. 716 AMFLO. NO. C21 SCHRADER NO. COUPLERS 715 C20 5142-12 B223 Female N/A 5141-12 727 728 ADAPTER PLUGS CP21 5138-11 H2C Male Male CP20 5139-11 H3C Female 1/4" 1/4" 1/4" 1/4" PARKER NO. THREAD NPT 131-61579

35 AIR SYSTEMS AIR LINE COUPLERS & PLUGS TYPE F ASCOT NO. 133-61563 133-61564 133-61471 133-61569 133-61568 133-61474 1/2” TRUE-FLATE SERIES • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Maximum working pressure 300 PSI 134-61544 ASCOT NO. 134-61544 133-61563 DILL. NO. D-17 D-16 D-17R D-3F D-2F D-0F MILTON NO. 1815 1816 — 1818 1817 133-61471 AMFLO. NO. C10 C9 C10R SCHRADER NO. COUPLERS 3512 3511 — ADAPTER PLUGS CP10 CP9 1819 CP9-03 3514 3513 3537 17 N/A N/A 3F 2F N/A Female 1/2" 1/2" Male Female 1/2" Female 1/2" 1/2" 3/8" Male Male FEMALE RECAP PLUG • Case hardened steel, plated to resist rust • MAXIMUM INLET PRESSURE: 300 PSI • MAXIMUM TEMPERATURE: 250° F • AIR FLOW: 40 SCFM • Equivalent to Milton 731 ASCOT NO. 133-01855 TYPE P ASCOT NO. 132-61476 132-61478 132-61553 132-61554 132-61481 132-61480 132-61559 132-61558 DILL. NO. N/A MILTON NO. 1855 AMFLO. NO. SCHRADER NO. ADAPTER PLUGS N/A N/A 3/8” AUTOMOTIVE SERIES • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Maximum working pressure 300 PSI PARKER NO. N/A THREAD Male NPT 1/4" ASCOT NO. MFG. NO. 131-61531 131-00731 731 731M DESCRIPTION M-Style Female Recap Plug: .305-32 Ascot Milton M-Style Female Recap Plug: .305-32 HI-FLO/HVLP COUPLER • Designed for air tools and paint spray equipment • Provides up to 50% more air flow than conventional couplers • Hi-Flo couplers/plugs for use with sanders, grinders and high air usage tools • HVLP couplers for use with paint spray guns 132-61476 DILL. NO. MILTON NO. D-15C 1803 N/A D-15 N/A D-1E 1804 1805 1806 132-61478 AMFLO. NO. SCHRADER NO. COUPLERS C8 C7 C6 502191 502181 C5 502105 ADAPTER PLUGS 1810 CP8 700835 D-0E 1809 CP7 700750 D-3E 1808 CP6 700647 D-2E 1807 CP5 700752 1E OE 3E 2E Female Male Female Male 1/4" 1/4" 3/8" 3/8" 132-61480 PARKER NO. N/A N/A 502141 15-W/BMT N/A 135-00910 THREAD NPT 135-00901 Male Female Female Male 1/4" 1/4" 3/8" 3/8" ASCOT NO. MILTON NO. AMFLO NO. DESCRIPTION 135-00900 135-00910 764 765 135-00980 N/A 135-00901 135-00911 761-1 760-1 C90 C91 C98 CP90 CP91 1/4" FNPT Hi-Flo/HVLP Coupler-Brass 1/4" MNPT Hi-Flo/HVLP Coupler-Brass 1/4" FNPT Hi-Flo Coupler-Steel 1/4" FNPT Hi-Flo Plug-Steel 1/4" MNPT Hi-Flo Plug-Steel 134-61552 134-61543 781 — 61-552 CPI-302 3510 510121 133-61569 PARKER NO. THREAD NPT 134-61545 134-61487 MILTON NO. 779 787 — AMFLO NO. CP12 C2RB C2R 134-61545 SCHRADER NO. 700624 — 598390 134-61543 DESCRIPTION Female 1/4" NPT Steel Plug (.302-32 Std.) Female 1/4" NPT Brass Coupler With Sleeve Female 1/4" NPT Steel Coupler Female 1/4" NPT Plug (.482 - 26-3/4") Male 1/4" NPT Plug (.302-32 inner & outer thread) 1/4” RETREADER SERIES

AIR SYSTEMS AIR LINE COUPLERS & PLUGS HYDRAULIC COUPLERS • High-flow hydraulic coupler, 10,000 PSI working pressure 135-10605 ASCOT NO. MFG. NO. 135-10605 135-10606 DESCRIPTION PVV-38-M PVV-38-F 3/8" Male Hose Half Coupler - For Hydraulic Rams 3/8" Female Ram Half Coupler - For Hydraulic Rams ¼” 5-IN-1 UNIVERSAL SAFETY EXHAUST QUICK CONNECT FEMALE COUPLER • Designed to safely bleed off HYDRAULIC QUICK CONNECT COUPLER/PLUG • 10,000 PSI maximum operating pressure • Safety sleeve lock prevents accidental disconnection • Heavy duty back-up ring prevents o-ring extrusion • Heat treated and plated steel for greater wear and corrosion resistance • Self-sealing poppet valves provide excellent high and low pressure seating • Coupler equivalent to Parker TC-371, AME TC-371 & ESCO 10626 • Plug equivalent to Parker TC-372, AME TC-372 & ESCO 10625 ASCOT NO. MFG. NO. 135-11606 135-12606 DESCRIPTION FD35-1001-0606 Hydraulic Quick Connect Coupler FD35-1002-0606 Hydraulic Quick Connect Plug COMBO COUPLER® • One coupler fits 1/4" Aro Style, 1/4" Automotive Standard and 1/4" Industrial Interchange plugs 135-61241 ASCOT NO. MFG. NO. MILTON NO. 135-61240 135-61241 C60 C61 745 746 RUBBER DUST COVER FOR HYDRAULIC COUPLERS • Hydraulic coupler dust cap • Used to keep dirt and debris from your hydraulic coupler when not connected • Made of a durable rubber material • Equipped with a pre-slit ring to allow coupler to slide easily over the counter • Comes standard with 8' and 10' hydraulic hoses DESCRIPTION 1/4" Series, 1/4" NPT Female 1/4" Series, 1/4" NPT Male PARKER E-Z TO CONNECT/ DISCONNECT COUPLING • E-Z-Mate is an exhaust type coupler designed to exhaust air pressure prior to disconnection • Valve sleeve acts as integral shut-off valve • Meets ISO 4414 requirements • Built-in sleeve-lok mechanically locks the valve sleeve ASCOT NO. 131-02514 131-02516 132-03716 132-03718 133-05018 133-05012 133-75112 133-75116 ASCOT NO. ASCOT NO. MFG. NO. 319-03732 03-RDC DESCRIPTION Rubber Dust Cover f Hydraulic Couplers 131-17000 131-18000 133-17030 MFG NO. EZ-251-4FP EZ-251-6FP EZ-371-6FP EZ-371-8FP EZ-501-8FP EZ-501-12FP EZ-751-12FP EZ-751-16FP MFG NO. 1857 1858 1859 BODY SIZE FEMALE COUPLERS 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4" BODY SIZE NIPPLES 1/2" 1/2" 1/2" THREAD Male Female Male air pressure before releasing the connector • Allows for safe disconnection, eliminating poten dangerous hose whip • Coupler remains connected to the plug while pressurized air is safely bled off • Constructed of heavy-duty steel which is ideal for applications requiring a durable and long lasting pneumatic coupler • Connects to all major interchanges: Industrial (M-style), High flow (v-style), automotive (t-style), Aro (A-style), and Lincoln (L-Style) • Order as a 131-01750K and recieve a free display ASCOT NO. MFG. NO. 131-01750 1750BK 135-12606 133-01773 1773BK DESCRIPTION ¼” 5-In-1 Universal Safety Exhaust Quick Connect Female Coupler Milton 1/2" G-Style Universal Safety Exhaust Coupler 36 131-01750 131-01773 131-17000 THREAD SIZE 1/4-18 3/4-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 NPT 1/2" 1/2" 3/8"

37 AIR SYSTEMS AIR LINE COUPLERS & PLUGS SOLID BRASS FEMALE CROSSES 5-GALLON PORTABLE AIR TANK • Perfect for emergency tire inflation • 125 PSI maximum pressure with manifold provides plenty of usable air for inflation tasks • 4' hose and ball foot air chuck makes it easier to get to hard to reach areas • Drain port included for regular draining to help eliminate rust and to help stop compressor generated water from flowing down the air line • Heavy duty steel gauge construction • Easy-to-read steel pressure gauge • Rubber pads on feet • Powder coated finish • Excellent for running several air lines from a common supply hose ASCOT NO. MFG. NO. NPT THREAD 136-00344 136-00366 344X 366X 1/4" 3/8" BRASS IN-LINE SWIVELS • Simple design is excellent to stop hoses from kinking or for use in pneumatic equipment applications 136-00344 ASCOT NO. MFG. NO. NPT THREAD 136-02344 136-02366 344R 366R 136-02366 1/4" Male/Female NPT 3/8" Male/Female NPT 107-69102 SOLID BRASS FEMALE TEES • Use to run two lines from a common feed ASCOT NO. MFG. NO. 107-69102 DESCRIPTION 91002ASC 5-Gallon Portable Air Tank ASCOT NO. MFG. NO. NPT THREAD 136-01344 136-01366 655 655-1 STANDARD BLOW GUN • Compact blo-gun with safety & rubber tip SOLID BRASS SWIVEL • Simple design is excellent to stop hoses from kinking or for use in pneumatic equipment applications 128-20000 136-34490 ASCOT NO. MFG. NO. 128-20000 148 DESCRIPTION Blow-Gun ASCOT NO. MFG. NO. NPT THREAD 136-34490 660 1/4" Male/Female Swivel 1/4" 3/8" 136-01366

AIR SYSTEMS HOSE ADAPTERS & FITTINGS UNISWIVELS • Features a full 360° swivel to keep hose from twisting when using air operated tools and while paint spraying REUSABLE HOSE REPAIR FITTINGS • Makes air tight connection without using hose clamps • Must closely match hose OD (outer diameter) and ID (inner diameter) accurately before ordering • Minimum order is box of ten 38 STANDARD FEMALE HOSE BARB FITTING 136-02366 ASCOT NO. MFG. NO. NPT THREAD 136-03344 S657 ASCOT NO. MFG. NO. NPT THREAD 136-72404 605 1/4" NPTF x 1/4" NPTM 1/4" x 1/4" Female Hose Barb 136-72404 STANDARD MALE HOSE BARB FITTINGS MALE PIPE THREAD • Select fitting to match hose ID • Fittings must be secured to hose with either a hose clamp or crimped-on ferrule 137-00621 ASCOT NO. 137-00418 137-00439 137-00420 137-00621 136-00608 ASCOT NO. 136-00401 136-00604 136-00406 136-00606 136-00806 136-00408 136-00608 136-00808 136-71404 136-71504 136-71604 136-71606 136-71806 136-71808 MFG. NO. 600 604 602 603 806 408 604 604-1 07001-0404 07001-0504 07001-0604 07001-0606 07001-0806 07001-0808 136-71606 NPT THREAD 1/4" 3/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 1/4" 5/16" 3/8" 3/8" 1/2" 1/2" HOSE ID 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" FEMALE PIPE THREAD 137-01621 ASCOT NO. 137-01418 137-01439 137-01520 137-01621 137-01623 137-01624 MFG. NO. 418F 439F 520F 621F 623F 624F HOSE OD 1/2" 9/16" 5/8" 21/32" 23/32" 21/32" HOSE ID 1/4" 1/4" 5/16" 3/8" 3/8" 3/8" NPT 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" MFG. NO. 615-8 615 617 621 HOSE OD 1/2" 9/16" 5/8" 21/32" HOSE ID 1/4" 1/4" 1/4" 3/8" NPT 1/4" 1/4" 1/4" 1/4"

39 AIR SYSTEMS AIR LINE COUPLERS & PLUGS BRASS FERRULES HOSE SPLICERS ASCOT NO. 136-71405 136-71406 136-71408 136-71440 137-11520 137-11621 137-11623 MFG. NO. 07014-05 07014-06 07014-08 07014-04 520S 621S 623S MALE PIPE COUPLINGS • Solid Brass NPT HOSE OD HOSE ID 5/16" 3/8" 1/2" 1/4" 5/8" 5/16" 3/8" 1/2" 1/4" 21/32" 23/32" 5/16" 3/8" 3/8" • For use with hose barb fittings • Use with hose crimper (Ascot No. 137-08550) • QUANTITY: 50 per box ASCOT NO. 137-00344 137-00346 137-00366 137-00388 MFG. NO. 646 643-1 643-3 647-2 PIPE COUPLING FEMALE NPT • Solid Brass ASCOT NO. MFG. NO. 137-01344 643 MALE NPT 1/4" x 1/4" BUSHINGS AND ADAPTERS • Solid Brass MALE NPT 1/4" 3/8" 3/8" 1/2" MALE NPT 1/4" 1/4" 3/8" 1/2" ASCOT NO. MFG. NO. FERRULE I.D. 137-73215 137-73225 137-73235 137-73255 137-73265 137-73275 137-73285 137-73295 137-73305 137-73315 137-73325 137-73335 137-73345 137-73355 137-39525 137-50291 137-72421 7321-50 7322-50 7323-50 7325-50 7326-50 7327-50 7328-50 7329-50 7330-50 7331-50 7332-50 7333-50 7334-50 7335-50 3952-50 5029A-50 7242A-50 .478" .500" .527" .562" .593" .625" .656" .687" .718" .750" .781" .812" .825" .850" .875" .900" .937" STANDARD HOSE CRIMPER • Provides production capability and “big tool” crimping advantages at a much lower cost • Heavy duty ductile iron casting and hardened steel dies for long service life and positive crimping • With five dies for crimping 1/4" single braid to 3/8" double braided hose ASCOT NO. 136-61264 137-01324 137-01346 137-01348 137-01368 137-01389 06120-0604 650 651 651-1 652 652-8 MALE NPT 1/4" 1/4" 3/8" 1/2" 1/2" 3/4" FEMALE NPT 3/8" 1/8" 1/4" 1/4" 3/8" 1/2" ASCOT NO. MFG. NO. 137-08550 1626 DESCRIPTION Standard Hose Crimper

AIR SYSTEMS CLAMPS & HOSES OETIKER 2-EAR CLAMPS • Especially suited for industrial or heavy vibrating equipment • Medium pressure clamp that is used for maintenance and OEM applications ASCOT NO. MFG. NO. 316-00507 316-00709 316-00911 316-01113 316-01315 316-01517 316-01518 316-01720 316-01922 316-02023 316-02225 316-02327 316-03740 507 709 911 1113 1315 1518 1720 NOMINAL SIZE 1/4" 5/16" 7/16" 1/2" 9/16" INCHES CLOSED-OPEN .197-276" .276-.354" .355-.433" .433-.512" .512-.591" 1517 19/32" .551-.669" 5/8" 3/4" 1922 13/16" 7/8" 15/16" 1" 1-1/2" 2023 2225 2327 3740 .591-.708" .669-.787" .748-.866" .787-.905" .866-.984" .905-1.063" 1.37-1.57" MM CLOSED-OPEN 5-7 mm 7-9 mm 9-11 mm 11-13 mm 13-15 mm — 15-18 mm INNER INCHES .236" .276" .276" .276" .295" .315’ WIDTH OF EAR 6.0 mm 7.0 mm 7.0 mm 7.0 mm 7.5 mm — — 8.0 mm 17-20 mm .335" 8.5 mm 19-22 mm .354" 20-23 mm .354 22-25 mm .394" 23-27 mm .394" 35-40 mm .394" 9.0 mm 9.0 mm 10.0 mm 10.0 mm — COATS REPLACEMENT AIR HOSE • For use with Coats Tire Changers • 60" long x 1/4" diameter • AC-1 Euro-style chuck • All brass connectors • Swivel fitting • Equivalent to Coats 806871 ASCOT NO. MFG. NO. DESCRIPTION 127-86871 86871-1 60" x ¼" Coats R Hose (Packaged 1 per bag) HUNTER REPLACEMENT AIR HOSE • For use with Coats Tire Changers • 60" long x 1/4" diameter • European-style air chuck • All brass connectors • Packaged 1 per bag ASCOT NO. MFG. NO. DESCRIPTION 127-86872 MADE IN THE USA 127-86872 86872-1 60" x ¼" Hunt Hose (Packaged 1 per bag) MADE IN THE USA 127-86871 40 PINCH CLAMPS OETIKER 2-EAR CLAMP SERVICE KIT • SERVICE KIT CONTAINS THE FOLLOWING SIZES: (15) 5/16"; (15) 7/16"; (15) 1/2"; (15) 9/16"; (12) 5/8"; (12) 3/4"; (12) 7/8"; (12) 15/16"; (12) 1"; and (1) pair straight jaw pincers • Made from stainless steel • Feature a specialized tonguein-groove design to provide a tight, secure seal • Tamper evident design • Ideal for both flexible and inflexible thin-walled hoses • Smooth-edged bandsteel design prevents damage to hoses Pinch Clamp 316-00102 ASCOT NO. 316-91098 316-01098 DESCRIPTION Complete Kit Pincer Only 316-91098 ASCOT NO. MFG. NO. 316-00058 316-00102 PEC58 CSC-102 DESCRIPTION 5/8" Pinch Clamp Handheld Pinch Clamp Crimper

AIR TOOLS Impact Wrenches Sanders & Blue Tork Air Ratchets Buffers & Grinders Air Drills Air Tools & Accessories Impact Wrenches Hammers, Grinders & Drills Air Tool Lubricants & Conditioners Accessories & Work Stations Cordless Tools

43 AIR TOOLS IMPACT WRENCHES 1/2" DRIVE IMPACT WRENCH • Twin hammer impact mechanism • Gasket: Concave edge on both TPE gasket and motor housing • Rotor: CM415 + heat-treatment HRC54 – 56 • Front/ Rear end plate: Aluminum material • Back screws: HEX head with dri-lock • Clutch housing: One rib & Aluminum material • Embossed design on motor housing for better fall protection • Handle & Inlet: Composite housing & 360° air Inlet with two retention pins ASCOT NO. MFG. NO. 153-07741 153-77412 CP7741 CP7741-2 DESCRIPTION 1/2" Drive Impact Wrench 1/2" Drive Impact Wrench Extended Anvil 3/8" HEAVY DUTY AIR IMPACT WRENCH • The most powerful 3/8" of its class for general maintenance • Maximize operator comfort with an extremely light and well balanced design • Most convenient and unique reverse technology in the market • ULTIMATE TORQUE: 415 ft./lb. ASCOT NO. MFG. NO. 152-07729 CP7729 DESCRIPTION 3/8" Heavy Duty Air Impact Wrench ASCOT NO. MFG. NO. 153-07748 153-77482 CP7748 CP7748-2 DESCRIPTION 1/2" Super Duty Air Impact Wrench-Tire Tool 2" Extended Anvil 1/2" DRIVE STUBBY IMPACT WRENCH • BEST POWER TO WEIGHT RATIO: 450 ft./lb. (610 Nm) • Ultra compact and easy to use • Durable with a steel front cover and aluminum body • One hand operation forward - reverse by either left or righthanded users • 3 setting positions • Jumbo hammer 1/2" HEAVY DUTY AIR IMPACT WRENCH • One hand push button forward/reverse power regulator • 4 positive power setting • Ultimate power in reverse • Differential regulator allows the operator to match the required power to the job • Patented oil bath Dyna-Pact clutch delivers smooth operation and extended durability • Handle exhaust with 360º air inlet swivel to prevent kinks • Power and economy for general repair, transmission work, exhaust systems and body shops • ULTIMATE TORQUE: 425 ft./lb. ASCOT NO. MFG. NO. 153-00734 CP734H DESCRIPTION 1/2" Impact Wrench ASCOT NO. MFG. NO. 153-07732 CP7732 DESCRIPTION 1/2" Drive Stubby Impact Wrench The 1/2" Drive Stubby Impact Wrench in use. The 1/2" Super Duty Air Impact WrenchTire Tool in use. 1/2" SUPER DUTY AIR IMPACT WRENCH-TIRE TOOL • 960 ft./lb. of torque (1,300 Nm) • Hard anodized end plates • Hard chromium aluminum c • Twin hammer mechanism • Ligh due to the Composite mo • COMPACT: Only 6.6" long • Curved handle with rubber material resistant to most chemicals used in w • Full teasing trigger • 360° s inlet • Friction ring sock 153-77412 153-07732

AIR TOOLS IMPACT 3/4" HEAVY DUTY AIR IMPACT WRENCH • Smoothest operating 3/4" impact on the market • One hand push button forward/reverse power regulator • Handle exhaust with 360˚ air inlet swivel • APPLICATIONS: spring work, truck and bus maintenance, farm machines & construction equipment • ULTIMATE TORQUE: 1,000 ft./lb. WRENCHES 1" HEAVY DUTY AIR IMPACT WRENCH • Chicago Pneumatic's strongest and most powerful 1" Impact Wrench • Operator productivity • Convenient reverse valve • Ideal for high volume tire work on trucks, buses, and heavy equipment • 1" impact wrench with 7" extended anvil • Rocking dog clutch • 4-position power settings throttle for ease of use 44 154-01772 CP772H-6 /" Impac 6" Extended Anvil ASCOT NO. MFG. NO. 155-50000 CP5000 3/4" HEAVY DUTY AIR IMPACT WRENCH • Reduced Length at only 7.9" • All controls within reach • Variable speed trigger • One-hand power adjustment • One-hand reverse system • 1440 ft./lb. (1950 Nm) of maximum torque • Composite motor housing • Twin hammer mechanism • 360° swivel air inlet • Sockt retainer ring c DESCRIPTION 7" Extended Anvil 1" SUPER DUTY AIR IMPACT WRENCH • 14.5 lb. (6.6 kg) • Twin hammer mechanism • Steel motor • Intuitive forward/ reverse lever & power regulator on both sides • 4-position power settings on both sides • Side handle with soft touch grip • Down exhaust • Aluminum housing • Composite cover on the clutch housing • Socket retainer ring • 1300 ft./lb. (1760 Nm) maximum torque in reverse ASCOT NO 154-077 154-776 ASCOT NO. MFG. NO. 155-07773 155-77736 CP7773D CP7773D-6 DESCRIPTION 1" Short Shank 6" Extended Anvil 3/4" SUPER DUTY AIR IMPACT WRENCH - "D" HANDLE • LIGHTWEIGHT: 3/4" at only 14.3 lb. • 1300 ft./lb. (1760 Nm maximum torque in reverse) • Twin hammer mechanism • Steel motor • Intuitive Forward/ Reverse lever & power regulator on both sides • 4-position power settings on both sides • Side handle with soft-touch grip • Down exhaust • Aluminum housing • Composit er on the clut 1" HEAVY DUTY AIR IMPACT WRENCH • High performance clutch provides longer life under tough conditions • High-efficiency 6 vane motor for maximum performance • Bottom exhaust directs exhaust away from the operator • Three-position power regulator with directional control • ULTIMATE TORQUE: 1,620 ft./lb. ASCOT NO. MFG. NO. 154-27763 154-37763 CP7763D CP7763D-6 DESCRIPTION 1" Short Shank 6" Extended Anvil 155-07778 155-77786 155-27786 CP7778 CP7778-6 CP7778SP-6 1" Short Shank 6" Extended Anvil #5 Spline with 6" Extended Anvil

45 AIR TOOLS IMPACT WRENCHES FULL TEASING TRIGGER 1" HEAVY DUTY AIR IMPACT WRENCH • 2140 ft./lb. (2900 Nm) of maximum torque in reverse • Pinless closed reinforced rocking dog impact mechanism • Socket retainer ring combined with hole retainer • Ergonomic side handle • Full teasing trigger • Regulator with integrated forward/reverse with • 3-position power settings in both directions ASCOT NO. MFG. NO. 155-0778 155-7782 155-17782 DESCRIPTION 1" HEAV IMPACT WRENCH 1" HEAVY DUTY AIR IMPACT WRENCH • High Operator Comfort-Ergonomic D-Handle with full teasing trigger • HIGH DURABILITY: Pinless closed reinforced rocking dog mechanism in oil bath • SHOCK ABSORBING: Rubber bumper protecting both applications and tool (included) • POWERFUL AND LIGHT: 1770 ft./lb. (2400 Nm) in reverse D-HANDLE FOR COMFORT • LIGHTWEIGHT to a composit operator com with hole re • ALL CONTR speed trigger One-hand r inlet • 1440 ft./lb RUBBER BUMPER ASCOT NO 155-07779 155-17779 155-07783 1" SUPER DUT IMPACT WRENCH • Rocking dog clutch for smooth operation and extreme durability • Teasing throttle for easy bolt starting • Convenient reverse valve for easy directional changes • Choice of professional mechanics for high volume tire work on trucks, buses and heavy equipment • ULTIMATE TORQUE: 1,400 ft./lb. ASCOT NO. MFG. NO. 155-07783 155-77836 CP7783 CP7783-6 DESCRIPTION 1" Short Shank 6" Extended Anvil ASCOT NO. MFG. NO. 155-07971 155-07976 156-79716 CP797 CP797-6 CP797SP-6 DESCRIPTION 1" Short Shank 6" Extended Shank 6" Extended Shank and #5 Spline 155-07976

AIR TOOLS SANDERS & BLUE TORK HEAVY DUTY HIGHSPEED SANDER • Built-in regulator and variable speed throttle for precise speed control • Rugged, energy efficien 1/2 HP motor • APPLICATIONS: Ideal for small jobs or hard to reach spots including paint removal, shaping filler patches, smoothing and rust removal • FREE SPEED: 14,000 RPM ASCOT NO. MFG. NO. 158-00778 CP9778 DESCRIPTION Heavy Duty High-Speed Sander MINI DISC SANDER KIT • KIT INCLUDES: CP7202 Mini Disc Sander plus (1) 3" backing pad, (10) 3" 80, 100 & 120 grit sanding discs, (1) 3" fine, medium and coarse surface prep disc & a spindle wrench packed in a heavy duty carrying case • FREE SPEED: 15,000 RPM 158-07202 ASCOT NO. MFG. NO. 158-07202 DESCRIPTION CP7202D Mini Disc Sander Kit 46 1 " NON-IMPACT WRENCH (BLUE TORK) • Two pneumatic motors for rundown and final tightening • Preset and adjustable shut off for torque control • Quality: Precise, accurate tightening to the manufacturer’s recommended torque and angle specifications • Environment Improvements: by increasing durability of the tools, we reduce waste • ERGONOMICS: very low noise level, virtually no vibration • EFFICIENCY: Precise and accurate tightening, les fatigued operators • Maximum Torque: 660 ft./lb ASCOT NO. MFG. NO. 168-07600 168-07602 168-07603 DESCRIP CP7600xB CP7600xB-R CP7600xB-R4P Non-R Torque Pr Rever Torque Pr Reversible 4 Torque Preset Selector TWO PNEUMATIC MOTORS LOW NOISE FRL UNIT FOR BLUE TORK • INCLUDES: Industrial grade filter; Regulator; Single point lubricator; 25' hose with capillary tube; 1 Quart of special tool oil approved for the Blue Tork 117-58625 ASCOT NO. MFG. NO. 117-58625 DESCRIPTION 586-254-1000 FRL Unit for Blue Tork

47 AIR TOOLS AIR RATCHETS 1/4" SUPER DUTY AIR RATCHET • Exceptional durability with an advanced head design that virtually eliminates slippage • Urethane grip for comfort and control • Faster rundown with 250 RPM • APPLICATIONS: Under-dashboard work, small engine repair and body shops • ULTIMATE TORQUE: 15 ft./lb. ASCOT NO. MFG. NO. 151-00826 CP826 DESCRIPTION 1/4" Super Duty Air Ra 3/8" HEAVY DUTY AIR RATCHET • Advanced motor, full caged gear, and head design • Only 10.7in / 272mm long • Better access to restricted areas • 2.7 lb. / 1.2 kg • Adjustable side exhaust avoids blowing dirt and dust • Ergonomic composite grip insulates operator’s hand from cold • Designed for a variety of applications from heavy ones such as transmission and suspension work to light ones such as engine repair, dashboard work and general maintenance • ULTIMATE TORQUE: 70 ft./lb. 3/8" QUIET AIR RATCHET • APPLICATIONS: exhaust systems, small engines, water and fuel pumps and radiator and air conditioner removal and replacement • New advanced, patented head design • Paten ergonomic square-handle design for a comfortable grip • Efficient 1/2 HP motor and triple idler plane gear system • ULTIMATE TORQUE: 50 ft./lb. RUBBER BUMPER ASCOT NO. MFG. NO. 152-00828 153-08281 CP828 CP828H DESCRIPTION 3/8" Quiet Air Ra 1/2" Quiet Air Ra 152-00828 3/8" EXTREME DUTY AIR RATCHET • Adjustable side exhaust • LOW NOISE LEVEL: Only 79 dBA • One of the highest torques available on the market • CP’s Patented TriSpring anti-slip head design ASCOT NO. MFG. NO. 152-07830 153-07830 DESCRIPTION CP7830Q CP7830HQ 3/8" Super Duty Ratchet 1/2" Super Duty Ratchet ASCOT NO. MFG. NO. 152-07829 153-07829 CP7829 CP7829H DESCRIPTION 3/8" Heavy Duty Air Ratchet 1/2" Heavy Duty Air Ratchet The 3/8" Air Ratchet in use. QUICK REFERENCE CHART CP No. Ascot No. CP826 CP828 CP7829 CP7830Q 151-00826 151-00828 152-07829 152-07830 Sq. Drive (mm) 1/4" (6) Std Bolt Size (mm) 1/4" (6) 3/8" (10) 3/8" (10) 3/8" (10) 3/8" (10) 3/8" (10) 3/8" (10) Net Wt. (kg) 1.13 (0.51) 2-5/8 (1.2) 1.235 (2.72) 2.7 (1.2) Avg Air Cons. (CFM) 3.5 4 4 5 (142) Air Inlet (in.) 1/4" 1/4" 1/4" 1/4" Min. Hose Size (in.) 3/8" (10) 3/8" (10) 3/8" (10) 3/8" (10) Working Torque (ft./lbs.) 5-15 (7-20) 10-50 (14-68) 10-55 (15-68) 10-90 (14-136) Max Torque (ft./lbs.) 15 (20) 50 (68) 150 RPM 95 (70) 90 (122)

AIR TOOLS NEEDLE SCALER, CUTTER, TIRE BUFFERS NEEDLE SCALER • Ideal for surface preparation work • Adjustable sleeve allows needle clearanc based on the application • 19 1/8" steel needles with high resistance to wear • Easily converts to a weld flux chipping hammer • BLOWS PER MINUTE: 4,800 HIGH SPEED TIRE BUFFER KIT • Jacobs chuck for holding buffing ac • Lock-off throttle • APPLIC tire patchwork, roughing ar recapping and cleaning tir • FREE SPEED: 22,000 RPM 48 ASCOT NO. MFG. NO. 157-07120 CP7120 DESCRIPTION Needle Scaler ASCOT NO. MFG. NO. 158-00871 158-01871 CP871K CP871 HIGH SPEED CUTTER • Adjustable speed r • Lock off thr start up • Rear e air away from w • MAX RPM: 22, COMPOSITE LOW SPEED TIRE BUFFER • Quick Change slip chuck for fast and easy ASCOT NO. MFG. NO. DESCRIPTION 157-00874 173-00101 CP874 CW1 change of buffing wheel • Adjustable speed regulator for precise control • Lock off throttle to prevent accidental start ups • Rear exhaust directs air away from work area • 3,000 RPM High Speed Cutter Cut-Off Wheel ASCOT NO. MFG. NO. 158-03873 CP873C DESCRIPTION Low Speed Tire Buffer 158-03873 DESCRIPTION Includes Over Hose High Speed Tire Buffer Only CORDLESS TIRE BUFFER • Boost your tire repair efficiency with the Chicago Pneumatic CP83 Perfect for both shop and road use, it features 2 speed settings, a quick integrated LED lighting for enhanced visibility • The cordless design off eliminating hose hassles • Weighing 20% less than previous models, it r improves handling • Enjoy eco-friendly operation with no emissions c tools • Compact and lightweight at 1.16 kg and 306 mm in length, it's eas ASCOT NO. MFG. NO. 158-13873 158-08323 DESCRIPTION CP873KNA CP8323 Cordless Tire Buffer Kit Cordless Tire Buffer (Tool Only)

49 AIR TOOLS GRINDERS & SURFACE CONDITIONING DISCS GREEN ZIRCONIA DISCS • Twist-to-lock backing • Offers longer life and more aggressive results than zirconia or aluminum oxide • Flexible discs resist chipping, snagging and cracking • For use on air grinders and are compatible with all 3M style, Type “R” backing pads • Especially good on extra hard metals • 20,000 RPM • 25 per box ASCOT NO. MFG. NO. DESCRIPTION 417-12612 417-12613 417-12614 417-12615 417-12617 417-12618 417-12619 12612 12613 12614 12615 12617 12618 12619 2" SURFACE CONDITIONING DISCS • Best used on aluminum parts • USA MADE • QUANTITY: 25 per box • MAXIMUM OPERATING SPEED: 25,000 ASCOT NO. MFG. NO. 417-13003 417-13004 417-13005 620TE-1 622TE-1 2" Disc, 24 Grit (25 per box) 2" Disc, 36 Grit (25 per box) 2" Disc, 50 Grit (25 per box) 2" Disc, 80 Grit (25 per box) 3" Disc, 36 Grit (25 per box) 3" Disc, 50 Grit (25 per box) 3" Disc, 80 Grit (25 per box) 2" QUICK CHANGE SURFACE CONDITIONING DISCS • Embedded with abrasive grain to eliminate fraying of edges, resist loading and provide a consistent finish • Ideal for flat or contoured surfaces • APPLICATIONS: Light deburring, surface preparation, blending scratches, removing rust, corrosion and oxidation, removing stains from stainless steel, finishing aluminum and stainless steel • Available in fine, medium or coarse 417-39120 417-39121 417-39122 MADE IN THE USA 417-13004 DESCRIPTION 2" Conditioning Discs: Brown (Coarse) 2" Conditioning Discs: Maroon (Medium) 620TE-1-50 2" Conditioning Discs: Brown (Coarse) MINI ANGLE DIE GRINDER • Compact, lightweight design for easy maneuv • 90˚ angle head allows flexibility in confined areas • Complete with 1/4" and 6mm collet • APPLICATIONS: high speed blending, smoothing, porting, and deburring in confined areas • MAX RPM: 22,500 ASCOT NO. MFG. NO. 157-00875 CP875 MINI DIE GRINDER • Compact, lightweight design for easy maneuverability • Adjustable speed regula for precise control • Complete with 1/4" and 6mm collet • APPLICATIONS: high speed blending, smoothing, porting, and deburring in confined areas • MAX RPM: 30,000 ASCOT NO. MFG. NO. 157-00876 CP876 DESCRIPTION Mini Die Grinder DESCRIPTION Mini Angle Die Grinder 417-13003, 417-13005 QTY./BOX 25 25 50 417-39202 ASCOT NO. MFG. NO. 417-39120 417-39121 417-39122 417-39202 417-39203 DESCRIPTION 3912BLUEF 2" Quick Change Surface Conditioning Discs: Blue (Fine) 3912MARNM 2" Quick Change Surface Conditioning Discs: Maroon (Medium) 3912BRWNC 2" Quick Change Surface Conditioning Discs: Brown (Coarse) 392002 13013 STRIP-BRITE PADS • Used for paint or coating removal • Features the quick and easy twist-to-lock attachment system • Open-web construction impregnated with silicon carbide to provide aggressive and long-lasting performance • Three-dimensional web has a soft edge, allowing it to remove paint and other coatings in those unreachable creases and dents while removing very little metal • Ideal for stripping paint without damaging metal, especially on aluminum • QUANTITY: 10 per Box ASCOT NO. MFG. NO. DESCRIPTION 417-16210 417-16211 16210 16211 Backing Pad for 2" Surface Conditioning Discs Backing Pad for 3” Surface Conditioning Discs 417-16210 Purple 2" Strip-Brite Pad Purple 3" Strip-Brite Pad

AIR TOOLS PROFESSIONAL STUD/HUB BRUSH KIT • Ideal for hub and stud cleaning job with ease • QUICK AND EASY: Change brushes in seconds • Includes a 1/2" drive adapter • Powered by a cordless drill • Replacement brushes available GRINDERS & SURFACE CONDITIONING DISCS 3M SCOTCH BRITE ROLOC SURFACE CONDITIONING DISCS • Used to quickly remove cut cork or paper gaskets and form-in-place gasket materials prior to the assembling of power train components, engine blocks, heads, and valve covers • Quick 1/2 turn on, 1/2 turn off Roloc disc fastening system • Best used on steel parts • 25 per box 50 417-07481 417-07485 402-32610 Ascot No. Mfg. No. 402-32615 402-32613 ASCOT NO. MFG. NO. 402-32610 DESCRIPTION 203610-ASC Stud/Hub Brush Kit 417-07486 ASCOT NO. MFG. NO. 402-32613 402-32615 402-32616 203613-ASC 203615-ASC 203616-ASC DESCRIPTION REPLACEMENT COMPONENTS FOR STUD/HUB BRUSH KIT 4-Pack of Replacement 14mm Stud Brushes 4-Pack of Replacement Passenger Hub Brushes 4-Pack of Replacement Truck Hub Brushes RPG 1/4" MINI ANGLE DIE GRINDER • Compact, lightweight design for easy use • APPLICATIONS: High speed blending, smoothing, porting and deburring in confined areas • Right angle for easy maneuvering • FREE SPEED: 22,000 RPM 157-10875 3M 2” GREEN CORPS ROLOC SURFACE CONDITIONING DISCS • Small diameter sizes allow for grinding in hard-to-reach places • Tough, coarse aluminum oxide abrasive stays sharper longer • Versatile Roloc attachment system works with any 1/4 drill or air tool • Allows for quick twist-on, twist-off disc changes for lower labor costs • Color coded to disc grades for faster, more accurate use • 25 per box ASCOT NO. MFG. NO. 417-36525 ASCOT NO. MFG. NO. 157-10875 A875 DESCRIPTION 417-36526 RPG 1/4" Mini Angle Die Grinder 417-36527 36526 36527 36525 DESCRIPTION 3M 2” Green Corps Roloc Surface Conditioning Discs - 40-Grit - 25 per Box 3M 2” Green Corps Roloc Surface Conditioning Discs - 60-Grit - 25 per Box 3M 2” Green Corps Roloc Surface Conditioning Discs - 80-Grit - 25 per Box 7486 417-07480 417-07481 417-07485 7480 7481 7485 Description 3M 2” Scotch Brite Roloc Surface Conditioning Discs - Coarse/Brown - 25 per Box 3M 2” Scotch Brite Roloc Surface Conditioning Discs - Medium/Maroon - 25 per Box 3M 3” Scotch Brite Roloc Surface Conditioning Discs - Coarse/Brown - 25 per Box 3M 3” Scotch Brite Roloc Surface Conditioning Discs - Medium/Maroon - 25 per Box 417-36526

51 AIR TOOLS DRILLS, HAMMERS & ACCESSORIES 1/4" REVERSIBLE MINI AIR DRILL • Composite housing with thermoplastic rubber handle grip • Wings on right & left sides to guide the forefinger • Large teasing trigger and progressive valve allowing more c to start holes • Low speed gear bo part for better pushing action while drilling and tapping • Reverse lever on the t easier access • Handle exhaust allo air to flow away from the opera with high quality industrial Jacobs® chuck for longer use • keyed Metal • APPLIC Excellent for drilling, honing, reaming and hole sawing • FREE SPEED: 3,300 RPM ASCOT NO. MFG. NO. 157-07302 DES CP7300RC 1/4" Reversible Mini Air Drill 1/4" MINI AIR DRILL • Composite housing with thermoplastic rubber handle grip • Wings on right & left sides to guide the forefinger • Large teasing trigger and progressive valve allowing more con start holes • Low speed gear box • Fla part for better pushing action while drilling and tapping • Handle exhaust allowing the air to flow away from the operator • Supplied with high quality industrial Jacobs® chuck for longer use • keyed Metal • APPLIC Excellent for drilling, honing, reaming and hole sawing • FREE SPEED: 3,300 RPM ASCOT NO. MFG. NO. 157-17302 DESCRIP CP7300C 1/4" Mini Air Drill 3/8" REVERSIBLE DRILL • Teasing throttle for precise c • APPLICATIONS: Screwdriving, honing and heav drilling • FREE SPEED: 2,600 RPM ASCOT NO. MFG. NO. 157-78926 DES CP789-R26 3 3/8" REVERSIBLE ANGLE DRILL • Composite housing with thermoplastic rubber handle grip • Lock-off throttle for more controlled applications • Built-in Forward–Reverse ring • Compact low profile head to get into confined spaces • Handle exhaust allowing the air to flow away from the operator• Supplied with high quality industrial Jacobs® chucks for longer use • APPLICATIONS: Excellent for drilling and screw driving in confined areas • FREE SPEED: 2,000 RPM ASCOT NO. MFG. NO. 157-01879 CP879C DESCRIPTION 3/8" Reversible Drill 157-17302 1/2" REVERSIBLE DRILL • Teasing throttle for precise c • APPLICATIONS: heavy drilling, r hole sawing and jobs requiring a lo of torque • FREE SPEED: 500 RPM ASCOT NO. MFG. NO. 157-00789 1 2 3 4 INDEX NO. ASCOT NO. 171-47050 171-47051 171-47052 171-47057 171-47059 171-47061 1 2 3 4 5 5 6 MFG. NO. A-047050 A-047051 A-047052 A-047057 A-047059 A-047061 7 8 9 DESCRIPTION Rivet Cutter Wide Cutting Chisel Bushing Splitter U-Joint & Tie Rod Tool 1" Separator Fork 1-1/4" Separator Fork 10 11 12 CP789-HR HAMMER ACCESSORIES INDEX NO. ASCOT NO. 6 7 8 9 10 11 171-47071 171-47073 171-47074 171-47078 171-47091 171-47095 MFG. NO. A-047071 A-047073 A-047074 A-047078 A-047091 A-047095 DESCRIPTION Twin Blade Cutter Cold Chisel Straight Punch Tapered Punch 1-1/4" Smoothing Hammer Quick-Change Retainer

AIR TOOLS 52

53 AIR TOOLS ASCOT IMPACT WRENCHES 1/2" DRIVE SUPER DUTY AIR IMPACT WRENCH • 2" extended anvil • Free speed: 8,000 RPM • Maximum torque: 600 ft./lb. • Powered by the durable and high performing twin hammer mechanism • Proven design and the most popular configuration in the tire service industry • Handle exhaust • Made in Taiwan 1/2" DRIVE COMPOSITE IMPACT WRENCH W/ EXTENDED ANVIL • Convenient one-hand operated forward/reverse push button • Four-setting torque adjustment switch • Compact with a total length of only 7.2" • Twin hammer mechanism provides smooth balance • Feather trigger for precise speed control • Energy efficient motor for maximum performance & long life • Swivel air inlet prevents hose from twisting • Made in Taiwan 153-23120 153-12260 175-43104 PUSH BUTTON ASCOT NO. MFG. NO. 175-43104 JB-04 DESCRIPTION Burgundy Protective Boot for Various 1/2" Drive Impact Wrenches IMPACT WRENCH SPECIFICATIONS ASCOT NO. 153-12260 153-23120 MFG. NO. A2131-2COMP A2312-2 SQUARE DRIVE 1/2" 1/2" FREE SPEED (RPM) 7,500 8,000 MAX TORQUE (FT./LB.) 685 600 AIR PRESSURE (PSI) 90 90 AIR CON. AVG (CFM) 5 4 AIR INLET (NPT) 1/4" 1/4" HOSE SIZE 3/8" 3/8" LENGTH 7.2" 8-1/8" WEIGHT (LB.) 4.5 5.6 FOR ONE-HAND OPERATION

AIR TOOLS ASCOT IMPACT WRENCHES ASCOT 1" DRIVE MINI PLUS AIR IMPACT WRENCH • 6" extended anvil • 3-position power setting • Rubber-coated side handle for added comfort • Powered by the twin hammer clutch • FREE SPEED: 5,000 RPM • MAXIMUM TORQUE: 2,000 ft./lb. 155-26464 54 RPG 1" DRIVE DUTY AIR IMPACT WRENCH • 6" extended anvil • Steel end plates • WORKING TORQUE RANGE: 1,600-1,800 ft./lb. • FREE SPEED: 4,500 RPM • MAXIMUM TORQUE: 1,800 ft./lb. 155-17786 RPG 1" SUPER DUTY IMPACT WRENCH • 6" extended anvil • 3-position forward and reverse • High efficiency 6-vane motor • Swoop-back side handle for maneuverability and balance • Pinless clutch mechanism • WORKING TORQUE RANGE: 1,800-2,000 ft./lb. • FREE SPEED: 5,000 RPM • MAXIMUM TORQUE: 2,000 ft./lb. IMPACT WRENCH SPECIFICATIONS ASCOT NO. 155-26464 155-12856 155-17786 MFG. NO. A26464 A2856 A778-6 SQUARE DRIVE 1" 1" 1" FREE SPEED (RPM) 5,000 5,000 4,500 MAX TORQUE (FT./LB.) 2,000 2,000 1,800 AIR PRESSURE (PSI) 90 — 90 AIR CON. AVG (CFM) 9 12 8.4 AIR INLET (NPT) 1/2" 1/2" 1/2" HOSE SIZE 1/2" 1/2" 1/2" LENGTH 19.2" 20.5" 20.3" WEIGHT (LB.) 17.86 27.6 26.59

55 AIR TOOLS TIRE BUFFERS & ACCESSORIES ASCOT LOW SPEED TIRE BUFFER WITH QUICK CHANGE SLIP CHUCK • Brass bushings provide performance and durability in tough working conditions • Includes whip hose and exhaust hose • Quick change slip chuck for fast and easy change of buffing wheel • Built-in regulator • Lock off throttle to prevent accidental start ups • Rear exhaust directs air away from the work area • Ideal for patchwork, roughing areas for recapping and cleaning tire moldings • Overhose Kit also Available Separately (175-00873) 158-10873 158-11873 ASCOT COMPOSITE LOW SPEED TIRE BUFFER W/ QUICK CHANGE SLIP CHUCK • Needle bearings provide performance and durability in tough working conditions • Includes exhaust hose • Quick change slip chuck for fast and easy change of buffing wheel • Lock off throttle to prevent accidental start ups • Built-in regulator • Rear exhaust directs air away from work area • Ideal for patchwork, roughing areas for recapping and cleaning tire moldings • Composite body ASCOT HIGH SPEED TIRE BUFFER WITH OVERHOSE KIT ASCOT HIGH SPEED BUFFER KIT WITH QUICK CHANGE CHUCK • Jacobs chuck for holding buffing accessories • Lock-off throttle • Free speed: 22,000 RPM • Applications: Tire patchwork, roughing areas for recapping and cleaning tire moldings • Includes overhose kit • Quick change chuck for holding buffing accessories • Lock-off throttle • Free speed: 22,000 RPM • Applications: Tire patchwork, roughing areas for recapping and cleaning tire moldings • Includes overhose kit 158-10871 158-11871 TIRE BUFFER SPECIFICATIONS Ascot No. Mfg. No. Description 158-10873 158-10871 158-11871 A871K-QC 158-11873 A873K Low Speed Tire Buffer with Quick Change Chuck A871K High Speed Tire Buffer with Overhose Kit High Speed Buffer Kit with Quick Change Chuck A873CK Composite Low Speed Tire Buffer w/ Quick Change Slip Chuck Free Speed (RPM) 2,800 22,000 22,000 2,800 Length 1.75" 2.5" 1.75" 1.75"

AIR TOOLS TIRE BUFFERS & ACCESSORIES QUICK CHUCK ADAPTER, EXTRA LONG • Quick change extra-long adapter 3/8”-24 thread • Two flat washers, two nuts included • 1-3/4” (45mm) thread length • For rasps, buffing wheels and brushes where extra length is required ASCOT NO. MFG. NO. 173-00024 DESCRIPTION 173-00024 AS-1047XL Quick Chuck Adapter, Extra Long QUICK CHUCK ADAPTER, LONG • Quick change long adapter 3/8” • One flat washer, one nut included • 1” (25mm) thread length 173-00025 ASCOT NO. MFG. NO. 173-00025 AS-1047 DESCRIPTION Quick Chuck Adapter, Long REPLACEMENT PARTS & ACCESSORIES ASCOT NO. MFG. NO. 173-00027 DESCRIPTION AS-1041-3/8 Quick Change Adapter For 3/8" Burrs DUAL HEAD QUICK CHUCK ADAPTER • Quick change extra-long adapter 3/8”-24 thread • Two flat washers, two adapters included • 1-3/4” (45mm) thread length • For rasps, buffing wheels and brushes where extra length is required ASCOT NO. MFG. NO. 173-00026 DESCRIPTION AS-1046D Dual Head Quick Chuck Adapter QUICK CHANGE ADAPTER FOR 3/8" BURRS • Quick release adapter for 3/8” shank • For use with 10mm carbide cutters and quick release couplers • Two allen screws to ensure tight fit • Allen wrench included 173-00027 173-00026 56 173-91650 173-92010 173-94000 175-00873 ASCOT NO. MFG. NO. 175-00873 175-18713 175-28713 173-00018 173-00019 173-00020 173-00022 173-00023 175-18713 DESCRIPTION REPLACEMENT PARTS FOR AIR BUFFERS A-873K-OH Overhose Kit for Tire Buffers A8713-TA SQC01 Replacement 7/16" Quick Change Slip Chuck ACCESSORIES FOR AIR BUFFERS QC18 QC19 QC20 QC22 QC23 Quick Chuck Adapter W/ Collar Quick Chuck Adapter W/ Spacer, 1" x 3/8" Thread Quick Chuck Adapter For 1/8" Shank Quick Chuck Adapter For 1/4" Shank Quick Chuck Adapter For 5/16" Shank 173-92120 173-94000 173-91650 173-92010 ASC-9212 173-92020 Trigger Assembly for Tire Buffers 173-92120 QUICK CHANGE ADAPTERS & ACCESSORIES Mfg. No. Ascot No. 173-92020 Description ASC-9202 Equivalent: Jacob Chuck adaptor 2-3/4” x 3/8” – 24 Equivalent: Quick Change Adaptor 2-1/4” x 3/8” – 24 ASC-9400 Rear Exhaust Hose Kit ASC-9165 ASC-9201 Equivalent: Quick Change Chuck 3/8” – 24 Equivalent: Jacob Chuck Adaptor 1-11/16” x 3/8” – 24 175-28713

57 AIR TOOLS TIRE BUFFERS & ACCESSORIES URYU 2.5" HEAVY DUTY HIGH SPEED TIRE BUFFER • High power to weight ratio • Robust sand cast housing • Steel internal parts for increased motor life • Rear muffled exhaust for quieter operation and reduced blowing dust • 3/8”-24 spindle, 14,600 rpm, 2-1/2” wheel capacity • Made in Japan URYU 5" HEAVY DUTY LOW SPEED TIRE BUFFER • Governed air motor for constant power and speed under load • Robust Sand Cast Housing for increased durability • Steel Internal Parts and four bearing construction for increased air motor life • Piped Away Exhaust for quieter operation and reduced blowing dust and surface contamination • 1/2”-13 spindle, 7,200 rpm, 5” wheel capacity • Made in Japan 158-65000 158-12500 ASCOT NO. MFG. NO. 158-65000 DESCRIPTION ASCOT NO. MFG. NO. 158-12500 UG-65EBL-Asy 2.5" Heavy Duty High Speed Tire Buffer 2.5" HEAVY DUTY HIGH SPEED TIRE BUFFER • High power to weight ratio • Robust sand cast housing • Rear muffled exhaust for quieter operation and reduced blowing dust • 3/8”-24 spindle, 14,600 rpm, 2-1/2” wheel capacity • Steel internal parts for increased motor life • Made in Taiwan 5" HEAVY DUTY LOW SPEED TIRE BUFFER • Governed air motor for constant power and speed under load • Robust sand cast housing for increased durability • Steel internal parts and four bearing construction for increased air motor life • Piped away exhaust for quieter operation and reduced blowing dust and surface contamination • 1/2”-13 spindle, 7,200 rpm, 5” wheel capacity • Made in Taiwan 158-65001 158-12501 UG-1250LM 5" Heavy Duty Low Speed Tire Buffer DESCRIPTION ASCOT NO. MFG. NO. 158-65001 DESCRIPTION SG-65R-IF 2.5" Heavy Duty High Speed Tire Buffer ASCOT NO. MFG. NO. 158-12501 DESCRIPTION SG-125H-1M-R 5" Heavy Duty Low Speed Tire Buffer

AIR TOOLS TIRE BUFFERS & ACCESSORIES RPG 3" CUT-OFF TOOL • Adjustable speed regulator for precise control • Lock-off throttle to prevent accidental start-up • Rear exhaust directs air away from work area • Durable gears for top performance and long life • FREE SPEED: 22,000 RPM ASCOT WHEEL WEIGHT ADHESIVE REMOVAL TOOL 157-10874 RPG 1/2" REVERSIBLE AIR DRILL • Quick change chuck retainer • Exhaust hose • Side handle • FREE SPEED: 500 RPM • CHUCK SIZE: 1/2” • Swivel air inlet for ease of use • High torque motor to cut through stubborn wheel weight adhesive, body pinstripes, etc. • High RPM to prevent pad from bogging down • Pad made of a tough and long-lasting material • Rubber-insulated motor housing for hand comfort • Lock-off trigger for added safety • Includes eraser pad • SPINDLE THREAD: 5/16"-24 157-03252 58 175-01035 157-03254 157-03253 PARTS & ACCESSORIES ASCOT NO. MFG. NO. 157-01035 175-11035 157-03254 A15352-6 157-03253 DESCRIPTION REPLACEMENT PARTS FOR WHEEL WEIGHT ADHESIVE TOOL A143252-6 Conical Eraser Pads PARTS & ACCESSORIES ASCOT NO. MFG. NO. 175-01035 175-11035 253340 H025 ADAPTER FOR ASCOT ADHESIVE WHEEL WEIGHT REMOVAL ERASER PADS DESCRIPTION REPLACEMENT PARTS FOR 1/2" REVERSIBLE AIR DRILL Side Handle Kit for A1035 Air Drill Air Hose Exhaust Kit for A1035 Air Drill AIR TOOL SPECIFICATIONS ASCOT NO. 157-03252 157-10874 157-01035 MFG. NO. A143252 A874 A1035 FREE SPEED (RPM) 3,700 22,000 500 AIR PRESSURE (PSI) 90 90 90 AIR CON. AVG (CFM) 4 5 4 AIR INLET (NPT) 1/4" 1/4" 1/4" HOSE SIZE 3/8" 3/8" 3/8" LENGTH 7.9" 7.25" 7.5" • Adapter for use with standard tools • 3/8” female thread allows for the adapter to screw directly onto the eraser pads • Will also be included with future eraser pad orders • Made in Taiwan • Similar to Mueller-Kueps 297 013 ASCOT NO. MFG. NO. 173-03253 DESCRIPTION SO7078-A Adapter For Ascot Adhesive Wheel Weight Removal Eraser Pads 173-03253 WEIGHT (LB.) 1.8 1.75 2.86 Replacement Eraser Pads for Wheel Weight Adhesive Removal Tool (6 per Package)

59 AIR TOOLS IR IMPACT WRENCHES 1/2" ULTRA DUTY TITANIUM AIR IMPACT WRENCH • Patented Drive Xchange System™: Helps you get more versatility, torque, and control out of your impact wrench. With 3/8,” 1/2”, and 3/4” drive options and 5 different anvil lengths, you can do more work with less equipment • Powerful Versatility: 1,500 ft.-lbs. of breakaway torque from a unique patented motor design • Quiet: 4 decibels quieter running from a patented motor design • Patented Direct Greasing System: Greasing your tool has never been easier. Directly grease the tool’s hammer for more efficient operation and increased run time • Reliable Performance: Stay working, and at peak power by quickly replacing worn or broken anvils • Ergonomic: Smaller, lighter and better balanced design under 4.5 lbs. and 7.4” overall length 175-00041 175-00061 175-00066 175-00142 153-22362 175-00042 ASCOT NO. MFG. NO. 153-22360 153-22362 175-00041 175-00042 A41H 175-00061 175-00062 175-00066 175-00142 175-00162 A61H AK62H EA66H EA42H EAK62H AK42H 175-00062 DESCRIPTION IR2236TiMAX ½” DXS Quiet Ultra Duty Air Impact Wrench – Standard Anvil IR2236TiMAX-2 ½” DXS Quiet Ultra Duty Air Impact Wrench – 2” Extended Anvil 1/2" Standard Anvil for IR2236QTiMAX Impact Wrench 2 pc. Anvil Set for IR2236QTiMAX Impact Wrench - 1/2" x 2" Extended & 3/4" Standard 3/4" Standard Anvil for IR2236QTiMAX Impact Wrench 2 pc. Anvil Set for IR2236QTiMAX Impact Wrench -1/2" Standard & 3/4" Standard 3/4" x 6" Anvil for IR2236QTiMAX Impact Wrench 1/2" x 2" Extended Anvil for IR2236QTiMAX Impact Wrench 2 pc. Anvil Set for IR2236QTiMAX Impact Wrench -3/4" Standard & 3/4" x 6" Extended INGERSOLL RAND DXS2 DEEP WELL 15PC. METRIC IMPACT SOCKET SE • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion & finished with Hi-Vis laser etching • DXS Drive delivers up to 20% longer life & up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets • Ball nose retention pin for quick, tool-free installation and removal • Relieved 6 point Hex corners help reduce faster rounding • Includes 15 deep sockets (12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm, 27mm, 30mm, 32mm, 33mm) and foam organizer shadowboard tray. 1/2" ULTRA DUTY TITANIUM IMPACT WRENCH • Titanium hammer case is designed to be strong and durable to protect the interior components • Impact and chemicalresistant housing protects against drops and exposure to shop fluids • Optimized for the vehicle repair industry, heavy trucks, tire lanes, fleet maintenance, body shops, general use, MRO, rail, heavy machinery, oil and gas, ship building and construction 153-42235 ASCOT NO. MFG. NO. 153-02235 167-00215 ASCOT NO. MFG. NO. 167-00215 DESCRIPTION 153-42235 DXSK2M15L Ingersoll Rand DXS2 Deep Well 15Pc. Metric Impact Socket Se IR-2235TiMAX-2 153-22235 DESCRIPTION IR-2235TIMAX IR-2235QTiMAX-2 1/2" Drive Ultra Duty Impact Wrench - Standard Anvil 1/2" Drive QUIET Ultra Duty Impact Wrench - 2" Extended Anvil 1/2" Drive Ultra Duty Impact Wrench - 2" Extended Anvil 175-00162

AIR TOOLS IR IMPACT WRENCHES 1/2" SUPER DUTY AIR IMPACT WRENCH • Most popular tool in its class • Offers the sheer power and performance features to tackle the toughest of jobs • Durable and economical • Torque Range: 25-350 ft./lb. ASCOT NO. MFG. NO. 153-00231 153-02312 153-02312 3/8" SUPER DUTY AIR IMPACT WRENCH • Tremendous power and longer life • APPLICATIONS: Popular choic of professional mechanics for under car, under hood and bench work • Handle exhaust directs air aw work • TORQUE RANGE: 20-150 ft./ lb., 180 max. IR-231HA IR-231HA-2 DESCRIPTION Standard Anvil Extended Anvil HIGH POWER, LONG LIFE 1/2" SUPER DUTY AIR IMPACT WRENCH • APPLICATIONS: For tire-changing, shock and spring work, front-end work and other hea automotive and truck work • P 500 ft./lb. of torque at a fr 7,000 RPM • IR-244A-2 with a t extended anvil for use with flip sock 153-02442 ASCOT NO. MFG. NO. 152-00212 IR-212 DES 3/8" Super Duty Air Impact Wrench 3/4" SUPER DUTY AIR IMPACT WRENCH • Non-biased motor delivers 1,050 ft./lb. of maximum torque in both forward and reverse • Two pow settings in forward and reverse • Variable speed trigger • Lighter than other 3/ impacts in its class • Handle-vented e directs air away from the operator • Silenc exhaust reduces tool noise while in use ASCOT NO. MFG. NO. 153-00244 153-02442 IR-244A IR-244A-2 Extended Anvil 1/2" SUPER DUTY AIR IMPACT WRENCH • Punish the toughest bolts with 780 ft./lb. of max reverse torque and 1,100 ft./ lb. of nut-busting torque, all powered by Ingersoll Rand’s finely tuned motor and twin-hammer impact mechanism • A pounds, the 2135QXPA is as light as it is po so your hand tires less, letting you ge work done • Ingersoll Rand’s Quie reduces the sound of the tool, sparing y without sacrificing a single ounce of po ASCOT NO. MFG. NO. 153-22135 153-32135 IR-2135QXPA IR-2135QXPA-2 DES S Extended Anvil 60 ASCOT NO. MFG. NO. 154-00259 IR-259 DESCRIPTION 3/4" Super Duty Air Impact Wrench 3/8" SUPER DUTY AIR IMPACT WRENCH • Titanium hammer case • 280 ft./lb. of torque will remove even the toughest nuts and bolts • APPLICATIONS: Transmissions, brak exhaust, body repair and underhood 152-02115 ASCOT NO. MFG. NO. 152-02115 DESCRIPTION IR-2115TiMAX 3/8" Super Duty Air Impact Wrench

61 AIR TOOLS IR IMPACT WRENCHES 3/4" SUPER DUTY AIR IMPACT WRENCH • Powerful 3/4" wrench • Combines compact size with high output • Ideal for everything from spring work to pinion nut and track pad removal and major engine teardowns • Jumbo hammer mechanism delivers up to 1,100 ft./lb. of torque smoothly, with less vibration ASCOT NO. MFG. NO. 154-00261 154-02613 154-02616 IR-261 IR-261-3 IR-261-6 DESCRIPTION Standard Anvil 3" Extended An 6" Extended An 154-00261 1" HEAVY DUTY AIR IMPACT WRENCH • Improved 1" drive tool perfect for truck and heavy equipment maintenance • Offers power and convenience at an affordable price • Compact, lightweight and perfect for working on suspension components • TORQUE RANGE: 100-1000 ft./lb. ASCOT NO. MFG. NO. 155-00295 156-02951 IR-295 IR-295-S 3/4" MAXIMUM IMPACT AIR IMPACT WRENCH • 3/4" Maximum Impact Air Impac • 1350 ft./lb. maximum rever a tool that weighs just 7.4 lb enough to access tight spac and designed to withstand t rugged environments • An air mo 16% more efficient than its pr and an easy-to-clean inlet scr less downtime, better tool perf and less money spent on compr • TORQUE RANGE: 200-900 ft./lb ASCOT NO. MFG. NO. 154-12145 154-22145 154-32145 IR-2145QiMAX IR-2145QiMAX-3 IR-2145QiMAX-6 DESCRIPTION Standard Anvil 3" Extended Anvil 6" Extended Anvil 3/4" ULTRA DUTY AIR IMPACT WRENCH • Offers all of the ergonomic, power and durability enhancing features as the IR-2161 but with a 6" extended anvil for those hard to reach applications • Jumbo hammer mechanism • Up to 1,200 ft./lb. of torque • Trouble-fr performance aided by the pressure-feed lube system • Compact and only 7-5/8" long • Handle exhaust ASCOT NO. MFG. NO. 154-21617 IR-2161XP-6 3/4" Ultra Duty Air Impact Wrench ASCOT NO. MFG. NO. 155-02850 155-28506 IR-2850MAX DESCRIPTION Standard Anvil IR-2850MAX-6 Extended Anvil STEEL CORE DESIGN 155-00295 DESCRIPTION Standard An #5 Spline Drive 1" D-HANDLE IMPACT WRENCH • SOLID STEEL IMPACT MECHANISM: Deliver 2,100 ft./lb. of torque • HIGHLY ENGINEERED DESIGN: Delivers the power you need over the life of the tool • STEEL CORE DESIGN: Nothing’s been proven to last longer • CHEMICAL RESISTANT HOUSING & STEEL CORE: Stands up to drops and harsh work environments • LIGHTWEIGHT: 25% lighter than the industry’s leading 1" wrench • 360° ADJUSTABLE HANDLE: The side handle rotates fully around the tool as the job demands • SWIVEL HOSE CONNECTION: Keeps cords from getting tangled so you can move freely around the garage • 6" ANVIL EXTENSION: Increases accessibility in hard to reach places 154-22145

AIR TOOLS IR IMPACT WRENCHES 62 155-02856 1" HEAVY DUTY AIR IMPACT WRENCH • Combines exceptional power, durability and operator convenience • Delivers 1450 ft./lb. of maximum torque at 90 psi (1770 ft./lb. max torque at 120 psi) with a 5000 RPM free speed and four-position regulator 360º swivel inlet • Chemical resistant boot • Available in 6" extended anvil and 6" extended #5 spline anvil A1:O89 or high production truck tire changing ASCOT NO. MFG. NO. 155-28560 155-02856 156-28566 IR-285B IR-285B-6 IR-285BS-6 DESCRIPTION Standard Anvil 6" Extended Anvil #5 Spline Super Duty Anvil 1" SUPER DUT AIR IMP 1" ULTRA DUTY AIR IMPACT WRENCH • 1" drive wr torque to handle t • Built-in pr handle and built misting of the air motor • Available in 6" extended anvil and 6" extended #5 spline drive anvil for high production truck tire changing 155-02806 ASCOT NO. MFG. NO. 155-00280 155-02806 156-28006 IR-280 IR-280-6 IR-280-S6 DESCRIPTION Standard Anvil 6" Extended Anvil #5 Spline Super Duty Anvil 1" ULTRA DUTY AIR IMPACT WRENCH 1" SUPER DUTY AIR IMPACT WRENCH • Designed for getting into cramped spaces with three-way adjustable handle • Ideal for spring work, tractor pads, bus maintenance and off-road/farm equipment • T RANGE: 150-1000 ft./lb. (1600 maximum) ASCOT NO. MFG. NO. 155-00290 156-02901 IR-290 IR-290-S DESCRIPTION Standard Anvil #5 Spline ASCOT NO. MFG. NO. 155-21710 2171XP DESCRIPTION Standard Anvil • High power-to-weight ratio • Full power reverse • 3-position power regulator • 360° swivel inlet • MAXIMUM TORQUE: 1250 ft./lb. • APPLICATIONS: Most powerful 1" wrench for spring work, tractor pads, bus maintenance and off-road/farm equipmen • MAXIMUM TORQUE: 2000 ft./lb. ASCOT NO. MFG. NO. 155-00293 156-02931 IR-293 IR-293-S DESCRIP Standard Anvil #5 Spline Drive FULL POWER REVERSE 155-21710

63 AIR TOOLS AIR HAMMERS & DIE GRINDERS SUPER DUTY AIR HAMMER • APPLICATIONS: For front-end and heavy exhaust work, riveting, king pin removal, bushing driving and bolt shearing • Controls starting strokes precisely with an extra-sensitive tease throttle • Super duty power, at up to 1,725 blows per minute • CHISEL SHANK DIAMETER: .401" ASCOT NO. MFG. NO. 159-00132 IR-132 AIR HAMMER KITS • Five-piece chisel set in a plastic pouch with .401" shank diameters • INCLUDES: Edging Tool, Tail Pipe Cutter, Straight Chisel, Cutting Chisel and Pouch FIVE-PIECE CHISEL SET ASCOT NO. MFG. NO. 171-01151 171-01161 171-01171 IR-115K IR-116K IR-117K NEEDLE SCALER • APPLICATIONS: For surface preparation work involving the cleaning or removal of paint, rust, dirt or weld slag • Durable, dependable and economical FOR SURFACE PREP AND CLEANING DURABLE & ECONOMICAL 157-00125 COMPACT & LIGHTWEIGHT ASCOT NO. MFG. NO. DESCRIPTION 157-00125 157-02219 IR-125B PF2219 EASY TO HANDLE DESCRIPTION IR-115 Air Hammer Kit IR-116 Air Hammer Kit IR-117 Air Hammer Kit 171-01161 SUPER DUTY MINI AIR DIE GRINDER • APPLICATIONS: For grinding, edgebreaking, de-burring, porting and polishing • Right-angle configuration • Compact, lightweight and easy to handle HEAVY DUTY AIR DIE GRINDER • APPLICATIONS: Designed for porting, light weld grinding and breaking sharp edges • 25,000 RPM • Self-locking throttle lever • Positive grip 1/4" capacity collet chuck with two collet wrenches ASCOT NO. MFG. NO. 157-00308 IR-308B DESCRIPTION Heavy Duty Air Die Grinder 157-00308 DESCRIPTION Super Duty Air Hammer HEAVY DUTY ANGLE AIR DIE GRINDER SUPER DUTY POWER • For work in confined areas • Features a right angle head • APPLICATIONS: For grinding, porting, polishing, de-burring, breaking sharp edges • Selflocking throttle lever • Positive grip 1/4" capacity collet chuck FOR WORK IN CONFINED AREAS 159-00132 ASCOT NO. MFG. NO. 157-00302 IR-302B Heavy Duty Angle Air Die Grinder 157-00302 DESCRIPTION Needle Scaler Needle Scaler Replacement Needles ASCOT NO. MFG. NO. 157-00307 IR-307B DESCRIPTION Super Duty Mini Air Die Grinder 157-00307

AIR TOOLS FINISHING TOOLS & AIR DRILLS 3/8" HEAVY DUTY AIR DRILL • Planetary gear reduction balances the load on bearings and gears, increasing tool life • Variable speed throttle makes starting holes easy • Positive action trigger stop reduces maximum speed at any time TIRE BUFFERS VARIABLE SPEED THROTTLE LEVERSTYLE TEASE TRIGGER 157-17802 • APPLICATIONS: For quick work of patchwork and roughing up low areas for recapping, tire scuffing and cleaning tire moldings • Lever style tease trigger with lock-off for easy operation 64 JACOBS CHUCK ASCOT NO. MFG. NO. 157-07802 157-17802 DESCRIPTION IR-7802A IR-7802RA Standard Air Drill Reversible Air Drill 157-00327 1/2" HEAVY DUTY AIR DRILL • APPLICATIONS: Designed for drilling, hole sawing, cylinder honing and other jobs that call for a 1/2" size • Industrial grade 1/2" chuck, ball and needle bearing construction and double reduction planetary gearing for longer life • No-load speed of 500 RPM and auxiliary side handle INDUSTRIAL GRADE 1/2" CHUCK ASCOT NO. MFG. NO. 157-00327 IR-327 157-01327 IR-327LS-A DESCRIPTION High Speed Tire Buffer Low Speed Tire Buffer, includes Over Hose ASCOT NO. MFG. NO. 157-07803 157-17803 DESCRIPTION IR-7803A IR-7803RA Standard Air Drill Reversible Air Drill 157-17803

65 AIR TOOLS FINISHING TOOLS & AIR DRILLS HEAVY DUTY AIR ANGLE SANDER 7" PAD • Heavy-duty motor handles tough jobs • Lightweight at only 4.5 lb. (2.04 kg.) • Ball Bearing construction for increased tool life • APPLICATIONS: rouging body filler, removing rust, and smoothing welds SURFACE CONDITIONING KIT • KIT INCLUDES: IR301 1/4" angle head die grinder in a blow molded plastic case with two coarse and two medium grit 3" 3M Rolco™ surface conditioning pads, two coarse, two medium grit 2" 3M Rolco™ surface conditioning pads and a disc holder 157-00313 ASCOT NO. MFG. NO. DESCRIPTION 157-00313 IR-313A Heavy Duty Air Angle Sander 7" Pad HEAVY DUTY DUAL ACTION QUIET AIR SANDER 6" PAD • A built-in silencer muffles noise as you work • APPLICATIONS: Quality sander used for feather edging, metal preparation and finish work on body filler QUICK CHANGE CHUCK ASCOT NO. MFG. NO. 158-03012 158-00311 ASCOT NO. MFG. NO. 158-00311 IR-311A DESCRIPTION Heavy Duty Dual Action Quiet Air Sander 6" Pad DESCRIPTION IR-301-2MK Surface Conditioning Kit

AIR TOOLS AIR TOOL ACCESSORIES AIR TOOL LUBRICANTS ASCOT NO. MFG. NO. 181-10510 181-10540 181-11510 181-11540 181-12228 328-10001 105-4T 115-LBK1 115-4T DESCRIPTION 105-LBK1 4 Oz. IR 105 Grease IR10 Oil & Grease Gun Head (6) 4 oz. Tubes - IR 105 Grease Refills 4 oz. IR 115 Grease IR10 Oil & Grease Gun Head (6) 4 oz. Tubes - IR 115 Grease Refills R000A2-228 Grease Gun 100-1 181-10510 1 lb. Grease for Impact Wrenches MOTOR TUNE-UP KITS • INCLUDES: the vanes, gaskets and seals for a complete tune-up • 231-TK3 also includes ball bearings AIR TOOL COVERS • Vinyl boots also absorb some of the tool vibration and protect air impact ratchets, wrenches and drills from external damage IR TOOL NO. KIT NO. 212 211 231C, 231HA-2 2235 244A, 244A-2 261, 261-2, 271 285B-6, 285BS-6, 285B 259 2135QXPA, 2135QXPA-2 212-Boot 211-P32 231-Boot 2235M-Boot 244-Boot 261-Boot 285-Boot 259-Boot 2135M-Boot IR TOOL NO. 212 231C, 231HA-2 235 ASCOT TOOL NO. 176-20232 176-21132 176-23122 176-13532 176-24432 176-26132 176-28532 176-25925 176-21350 244A, 244A-2 261, 271 280 Series 7803A, 7803RA 285B-6 2235TiMAX 2135QXPA, 2135QXPA-2 KIT NO. 212-TK2 231-TK3 235-TK3 244-TK2 261-TK2 280-TK2 7803-TK1 285B-TK1 2235-TK1 2135-TK2 ASCOT TOOL NO. 176-10212 176-10221 176-12313 176-10244 176-10261 176-10280 176-17803 176-10285 176-22235 176-32135 RETAINING RINGS IR TOOL NO. 231-425A R1A-159 291-425 291-426 ASCOT TOOL NO. 175-31425 175-01590 175-91425 175-81426 DESCRIPTION Socket Retainer for IR231, 231-2 Retainer O-Ring for IR 231, 231-2 Socket Retainer for IR-281, 285 Retainer O-Ring for IR-281, 285 66 HAMMER MECHANISM TUNE-UP KIT • INCLUDES: the anvil, hammer (or pins) and gaskets for the impact mechanism • 110-TK1 includes only the cam ball, two anvil pins and anvil spring 175-52122 175-83071 175-82651 IMPACT WRENCH ACCESSORIES ASCOT NO. MFG. NO. DESCRIPTION IR TOOL NO. 231C, 244A 231-2HA-2, 244A-2 2235TiMAX 2135QXPA-2 KIT NO. 231-THK1 231-THK2 ASCOT TOOL NO. 176-00231 178-01231 2235-THK1 178-02235 2135-THK1 178-02335 178-02135 175-52122 175-82651 175-83071 86430 H-082651 86440 1/2" Wrench Anvil Retainer Clip 1" Impact Wrench Retainer Clip O-Ring O-Ring for 1/2" Impact Wrench Retainer Clips

67 AIR TOOLS AIR TOOL LUBRICANTS & CONDITIONER BLASTER AIR TOOL CONDITIONER • APPLICATIONS: Thoroughly cleans internal pneumatic tool parts, restoring them to peak performance and prolonging tool life • Breaks loose deposits that create friction and impede smooth operation • Provides long-lasting lubrication • Protects tools from freezing down to -25°F • 12 cans per case SUPER RED PNEUMATIC AIR TOOL LUBRICANT • APPLICATIONS: Dissolves gum & varnish formation • Prevents gum & varnish formation • Ensures smoother starts • Special rust & oxidation inhibitor • Clean and free running • 12 bottles per case THOROUGHLY CLEANS PARTS DISSOLVES GUM & VARNISH ASCOT NO. MFG. NO. DESCRIPTION 181-00404 16-ATC 181-01404 ATC-TS Blaster Air Tool Conditioner – 11 Oz. Blaster Air Tool Conditioner - 3.5 Oz. Aerosol ASCOT NO. MFG. NO. DESCRIPTION 181-00406 0406 Super Red Pneumatic Air Tool Oil, 32 Oz. MARVEL AIR TOOL OIL • 12 Bottles per case • 4 oz. bottles • Specifically formulated for use in all air tools or in-line lubricators Prevents rust • Assures maxium tool performance • Made in the U.S.A MARVEL AIR TOOL OIL • APPLICATIONS: Specially formulated f use in all piston type rotary air tools and in-line air lubricators • Prevents rust forma while providing positive lubrication for smooth starting and longer tool life • As maximum performance by dissolving gum and sludge • 6 bottles per case PREVENTS RUST PREVENTS RUST ASCOT NO. MFG. NO. DESCRIPTION 181-00085 MM085 32 Oz. ASCOT NO. MFG. NO. DESCRIPTION 181-00080 MM08R Marvel Air Tool Oil 4 Oz.

AIR TOOLS WORK STATIONS MOBILE WHEEL WORK STATION • Features gas-strut assisted boom that supports the weight of those heavy impact wrenches • The suspended impact wrench is capable of rotating to the operator desired position • Features side and rear storage compartments designed to organize sockets, tire irons, lubricants, hoses and various wheel parts • Air wrench is supported and held in desired position • Air wrench suspension boom allows for directional freedom and reduces damage TIRE TOOL STATION • Organize your tools • Universal top tray with slots for torque sockets, etc. • Dual cradles for impact guns, 1/4" airline connections • INCLUDES: (2) 25’ x 3/8" recoil hoses with 1/4" swivel fittings 68 515-02400 515-00555 ASCOT NO. MFG. NO. 515-00555 WS-005 DESCRIPTION Mobile Wheel Work Station ASCOT NO. MFG. NO. 515-02400 2400 DESCRIPTION Tire Tool Station

69 CORDLESS TOOLS IR CORDLESS TOOLS 1/2" CORDLESS IMPACT WRENCH • Performance: The patented DXS® system features torque that works smarter, not harder. Tight-fitting DXS® attachments deliver up to 15% more motor torque to fasteners*, making the tools more effective – so you never lose power. • Productivity: Fast-swapping DXS® accessories let you perform multiple jobs with one tool, decreasing downtime and saving space in your toolkit. • Versatility: Maneuver more easily with a compact design that provides greater access to tight spaces. IQV20™ battery compatibility eliminates the need to purchase multiple battery types. • Durability: Withstand the rigors of the job site with an impact-resistant body and IPX6-certified environmental rating for protection against water ingress. • Ergonomics: Lightweight 6.1lb (bare tool) build and ergonomic pistol grip for comfortable all-day use and less operator fatigue. ASCOT NO. MODEL 153-71523 W7153-K22 BATTERIES INCLUDED 2 DRIVE SIZE 1/2" ANVIL Standard MAX TORQUE FT./LB. 1,003 (1,601) FREE SPEED (RPM) 0-1900 LENGTH IN. WEIGHT 6.1 lb. 8.3 1" CORDLESS IMPACT WRENCH • Remove hoses & trip hazards to keep operators & technicians saf • World's Most Powerful 1" Cordless Impact Wrench with best in class power-to-weight ratio • 250 bolts per charge – tackle a full day’s worth of work • 3,000 ft-lbs of nut busting torque, 2,200 ft-lbs of tightening torque • IP56 rated for tough environmental conditions • IQv Power Control System includes 3 modes: MAX Power, MID, and Snug • 360° adjustable D-handle: rotates fully around the tool as the job demands COMPATIBLE WITH IQV20 SERIES BATTERY ASCOT NO. 153-94911 153-96911 MODEL W9491-K4E W9691-K4E BATTERIES INCLUDED 4 4 DRIVE SIZE 1" Square 1" Square ANVIL Standard MAX TORQUE FT./LB. 2600 ft./lbs. 6" Extended 3000 ft./lbs. FREE SPEED (RPM) 890 890 BPM 1170 1170 LENGTH IN. WEIGHT 20-1/8" 26-1/8" 38.3 39.9 360° ADJUSTABLE D-HANDLE 153-96911

CORDLESS TOOLS MILWAUKEE CORDLESS TOOLS CORDLESS 1/2" DRIVE IMPACT WRENCH • 4 CUSTOMIZABLE MODES: Provides multiple fastening torque outputs designed for sedans, light trucks and box trucks • POWERSTATE™ BRUSHLESS MOTOR: Delivers up to 750 ft./ lb. of fastening torque and 1,100 ft./lb. of nut-busting torque • LONG MOTOR LIFE: POWERSTATE™ Brushless Motor delivers maximum power and long motor life • FASTER TIRE SERVICE: Enables users to perform faster tire service by removing the hassle of pneumatic hoses, compressors, and torque sticks • PART OF THE M18™ SYSTEM: Featuring over 175+ Tools 153-76922 LONG 1" DRIVE EXTENDED ANVIL D-HANDLE IMPACT WRENCH • POWERSTATE™ Brushless Motor delivers up to 2,000 ft-lbs of nut-busting torque and 1,900 ft-lbs of fastening torque • Install up to 200 1-1/4" bolts on a single HIGH OUTPUT™ HD12.0Ah battery • The 4-Mode DRIVE CONTROL™ provides you with greater control over the output speed and power of the MILWAUKEE® High Torque Impact Wrench • The ONE-KEY™ Technology allows you to customize, track, and manage the impact wrench with the ability to set a repeatable torque output for maximum control 155-86922 70 ASCOT NO. MFG. NO. 153-76920 2769-20 153-76922 2769-22R DESCRIPTION Cordless 1/2" Drive Impact Wrench – 2" Extended Anvil (Bare Tool) Cordless 1/2" Drive Impact Wrench – 2" Extended Anvil (Kit) ASCOT NO. 155-86920 155-86922 MFG. NO. 2869-20 2869-22 DESCRIPTION 1" Drive Extended Anvil D-Handle Impact Wrench (Bare Tool) 1" Drive Extended Anvil D-Handle Impact Wrench (Kit) EXTENDED ANVIL

71 CORDLESS TOOLS MILWAUKEE CORDLESS TOOLS CORDLESS LOW SPEED BUFFER KIT • Dedicated buffing and drilling • 2-Mode Drive Control™ • Drilling Mode: 1,200 RPM • Buffing Mode: 2,500 RPM • Runtime to complete up to 30 flat repairs on a single XC4.0Ah battery • Premium rubber overmold withstands corrosive materials and provides increased comfort when in use • Compatible with all M12™ batteries & chargers • POWERSTATE™ Brushless Motor • REDLINK PLUS™ Electronic Intelligence: • REDLITHIUM™ batteries: • Kit includes: Low Speed Tire Buffer, M12™ REDLITHIUM™ CP2.0 Battery, M12™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack, M12™ Lithium-ion Battery Charger, Quick Change Adapter, Carrying Case 158-40922 COMMERCIAL FLAT TIRE REPAIR KIT • Designed to deliver you increased productivity for high volume commercial flat repairs that commercial tire technicians demand • Kit includes: M12 FUEL™ Low Speed Tire Buffer (2409-20), M12 FUEL™ 1/2" Drill Driver (Tool Only) (2503-20), Quick Change Adapter, M12™ REDLITHIUM™ CP2.0 Battery (48-11-2420), M12™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack(48-11-2440), M12™ Lithium-ion Battery Charger (48-59-2401) & Carrying Case 158-45922 INCREASE FOR HIGH PRODUCTIVITY VOLUME REPAIRS ASCOT NO. MFG. NO. 158-40920 158-40922 DESCRIPTION 2409-20 2409-22 Cordless Low Speed Buffer Cordless Low Speed Buffer Kit ASCOT NO. MFG. NO. 158-45922 2459-22 DESCRIPTION Commercial Flat Tire Repair Kit

CORDLESS TOOLS MILWAUKEE CORDLESS TOOLS CORDLESS 1/4" HIGH SPEED RATCHET KIT Our M12 FUEL™ 1/4" High Speed Ratchet Kit is part of the latest addition to our best-inclass lineup of ratchets. This MILWAUKEE® cordless ratchet kit features the fastest speed while installing and removing fasteners. The most compact head size in its class gives you more access in tight spaces. A steel yoke housing and POWERSTATE™ Brushless Motor deliver the superior durability that you expect from Milwaukee. The M12 FUEL™ High Speed Ratchets are an ideal addition to any technician tool chest, allowing you to be more productive than any other battery-powered ratchet. 72 ASCOT NO. MFG. NO. 172-56622 2566-22 DESCRIPTION Cordless 1/4" Ratchet Tool Kit CORDLESS 3/8" RATCHET TOOL KIT • MOST POWERFUL: Delivers industry leading torque output of up to 40 ft./lb. • MOST COMPACT: Up to 20% smaller head size • MOST DURABLE: Worlds 1st brushless ratchet provides 2x longer motor life • Best-in class torque to head size ratio • Premium metal components for longer durability ASCOT NO. MFG. NO. 172-55721 2557-21 DESCRIPTION Cordless 3/8" Ratchet Tool Kit PART OF THE M12™ SY T OF THE

73 CORDLESS TOOLS MILWAUKEE CORDLESS TOOLS M18 CORDLESS TIRE INFLATOR • Fastest 18V Cordless Tire Inflator: Top off 33” light truck tires in under 1 minute • Truefill™ Technology: Auto pressure check feature activates to ensure PSI target is achieved,automatic shut-off at selected PSI prevents overinflation • Tire capacity: Premium components and unmatched durability to handle tires over 100 PSI, rated for 150 PSI max • Optimized for passenger, light truck and other medium duty tires • PSI memory preset: Save your most used PSI rating with up to 4 PSI slots • On-board hose & nozzle storage: easily store 36” hose and attachments • Accessories: Includes all brass Schrader chuck, inflation needle, inflator nozzle & Presta chuck • Anti-vibration feet: minimize tool walk while in use • Fits all M18™ Batteries MILWAUKEE M18 HOTSHOT JUMP STARTER • Always Ready To Jump • True All-Weather Performance • Longer Life • Jump with M18™ Batteries, Optimized For M18™ REDLITHIUM™ XC5.0 & Above • Prepared To Jump In Under 70 Seconds • No Maintenance Required • Jump up To 8.1L Gas & 3.0L Diesel • Capacitors Rated Up To 500,000 Cycles • Performs At -4°F To 122°F • Up To 70 Jump Starts With One M18™ XC5.0 Battery • 2000 Peak Amps • Spark Proof, Reverse Polarity, & Overheat Protection • Custom Clamp Design • Digital Display With Voltage Readout • IP65 Rated (Tool Only) 477-84820 345-38412 ASCOT NO. MFG. NO. 477-84820 DESCRIPTION 2848-20 M18 Cordless Tire Inflator MILWAUKEE TOOL M18 CORDLESS 2-SPEED GREASE GUN KIT • Delivers maximum pressure and unmatched versatility, offering an industry leading 10,000 PSI max operating pressure and a patent pending pre-set grease counter that allows service and maintenance professionals to dispense precise amounts of grease • 2-speed design offers users the ability to select between max pressure and max flow rate • Unique features include an on-board LED light, a lock-on/lock-off trigger, and a plunger rod with markings to gauge how much grease is left in the barrel • The tool’s stand up design and shoulder strap capability offer user convenience, while limiting fatigue and the 48” flexible hose offers greater accessibility when greasing hard to reach fittings Milwaukee Tool M18 Cordless 2-Speed Grease Gun Kit • Powered by an M18™ REDLITHIUM™ Battery pack, this is the industry’s only 18V grease gun that’s battery is compatible with a system of tools Kit Includes: • (1) M18™ Cordless 2-Speed Grease Gun (Tool Only)(2646-20) • (1) M18™ & M12™ Multi-Voltage Charger(48-59-1812) • (1) M18™ Compact REDLITHIUM™ Battery (48-11-1815) • (1) 48” Flex Hose w/ Spring Guard • (1) High Pressure Grease Coupler • (1) Carrying Case • (1) Shoulder Strap ASCOT NO. MFG. NO. 345-38412 3841-20 DESCRIPTION Milwaukee M18 Hotshot Jump Starter 345-11835 ASCOT NO. MFG. NO. 324-64621 DESCRIPTION 2646-21CT Milwaukee M18 Cordless 2-Speed Grease Gun Kit PART OF THE M18™ SYSTEM

CORDLESS TOOLS MILWAUKEE CORDLESS TOOLS M18 LITHIUM 3.0AH HIGH OUTPUT BATTERY • REDLINK™ INTELLIGENCE: Our battery circuitry provides optimized performance and overload protection using total system communication between tool, battery and charger • BEST-IN-CLASS CONSTRUCTION: Offers long-lasting performance and the best protection against jobsite, weather and environmental conditions • FUEL GAUGE ONBOARD: Displays remaining run-time • VERSATILITY: Powers all 175+ M18™ cordless solutions • Compatible with all M18™ tools • 2 year battery warranty M18 LITHIUM 5.0AH BATTERY PACK • REDLINK™ INTELLIGENCE: Provides optimized performance and overload protection using total system communication between tool, battery and charger • BEST-IN-CLASS CONSTRUCTION: Offers long-lasting performance and durability • FUEL GAUGE ONBOARD: Displays remaining runtime for less downtime on the job • ALL-WEATHER PERFORMANCE: Delivers fade free power in extreme jobsite conditions • VERSATILITY: Powers more than 175+ Milwaukee® M18™ cordless power tools • Ground transport only M18 LITHIUM HD12.0 HIGH OUTPUT BATTERY • The M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 is the best performing cold weather pack ever made, providing increased power in extreme cold weather conditions (below 0F / -18C) • Provides the most work per charge of any professional power tool battery in the industry, driving full corded replacement on the jobsite • The REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery is fully compatible with 150+ M18™ solutions 74 345-11835 345-11850 ASCOT NO. MFG. NO. 345-11835 DESCRIPTION 48-11-1835 M18 Lithium High Output Battery CP3.0 M12 LITHIUM BATTERIES • REDLINK™ INTELLIGENCE: Provides optimized performance and overload protection using total system communication between tool, battery and charger • BEST-IN-CLASS CONSTRUCTION: Offers long-lasting performance and durability • ALL-WEATHER PERFORMANCE: Delivers fade-free power in extreme job site conditions • VERSATILITY: Powers 70+ Milwaukee M12 cordless solutions ASCOT NO. MFG. NO. 345-12430 345-12440 345-12460 DESCRIPTION 48-11-2430 48-11-2440 48-11-2460 M12 Lithium 3.0 Compact Battery M12 Lithium XC4.0 M12 Lithium XC6.0 345-12430 RESISTANT BATTERY STARTER KIT • Kit includes: - (2) M18™ REDLITHIUM™ XC5.0 Resistant Batteries, (1) M18™ & M12™ Multi-Voltage Charger, (1) Contractor Bag • Best-in-class construction: Resistant housing designed to provide increased protection against exposure to common oils, greases, and solvents • All-weather performance: delivers fade free power in extreme jobsite conditions • Fuel gauge onboard: Displays remaining runtime • REDLINK™ Intelligence: Our battery circuitry provides optimized performance and overload protection using total system communication between tool, battery, and charger • Versatility: Powers more than 250+ Milwaukee® M18™ cordless power tools • Charges all M18™ & M12™ Batteries: Full system compatibility • Single unit simplicity for quick charge of all M12™ and M18™ battery packs ASCOT NO. MFG. NO. 345-11852 DESCRIPTION 48-59-1852R Milwaukee Tool M18 REDLITHIUM XC5.0 Resistant Battery Starter Kit 345-12440 345-12460 ASCOT NO. MFG. NO. 345-11850 DESCRIPTION 48-11-1850 M18 Lithium 5.0AH Battery Pack ASCOT NO. MFG. NO. 345-11812 345-11812 DESCRIPTION 48-11-1812 M18 Lithium High Output Battery HD12.0 PART OF THE M18™ SYSTEM PART OF THE M18™ SYSTEM PART OF THE M12™ SYSTEM

TIRE INFLATION PILOT CAGES KEN-TOOL OFFERS SIZES AND DESIGNS FOR ALL YOUR NEEDS. SLEEVE™ POLYAMIDE WHEEL CENTERING SLEEVES HAMMERS & WEDGES TIRE IRONS TUBELESS TRUCK TIRE MOUNT/DEMOUNT IRONS HEXCHEX® MULTI-SIZE LOOSE WHEEL NUT INDICATORS DUAL WHEEL SEPARATION BAG

WHEEL SERVICE PRODUCTS WHEEL SERVICE Impact Socket Sets Individual Impact Sockets Torque Wrenches & Accessories Loose Nut Prevention Wheel Centering Products Lug Nut Removal Products Wheel Attaching Hardware Tire & Wheel Service Tools Stud & Hub Cleaning Tools

77 WHEEL SERVICE PRODUCTS IMPACT SOCKET SETS 1/2” DRIVE 4-PIECE FLANK BITE DAMAGED NUT REMOVER SOCKET SET • Contains 17mm, 19mm, 21mm, 22mm • New Flank Bite design works on up to an industry leading 90% rounded lug nut 1/2” DRIVE 13-PIECE SAE SET • Contains 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15 1-1/16”, 1163-01150 163-22219 ASCOT NO. MFG. NO. 163-22219 DESCRIPTION 122019K2 1/2” Drive 4-Piece Flank Bite Damaged Nut Remover Socket Set ASCOT NO. MFG. NO. 163-01150 1150 DESCRIPTION 1/2” Drive 13-Piece SAE Set 1/2” DRIVE 5-PIECE DEEP THIN WALL FLIP SE • Contains 3 x 21mm, 7/8” x 15 x 19mm, 3” e 1/2” DRIVE 13-PIE DEEP SE • Contains 7 5/8”, 11/ 15/16”, 1”, 1163-01151 ASCOT NO. MFG. NO. 167-12050 1205D DESCRIPTION 1/2” Drive 5-Piece Deep Thin Wall Flip Set ASCOT NO. MFG. NO. 163-01151 1151D DESCRIPTION 1/2” Drive 13-Piece Deep Set

WHEEL SERVICE PRODUCTS IMPACT SOCKET SETS 1/2” DRIVE 5-PIECE 1/2 SIZE FLIP SOCKET SET • Contains (Metric Deep) 18.5mm x 19.5mm, 21mm x 21.5mm, 21.5mm x 22.5mm, 22mm x 22.5mm, Extractor punch • Individual sockets also available seperately • Coated with a rust and corrosion resistant black oxide finish 1/2” DRIVE 14-PIECE METRIC STANDARD SET • Contains (Metric 78 167-12051 ASCOT NO. MFG. NO. 167-12051 000524 DESCRIPTION 1/2” Drive 5-Piece 1/2 Size Flip Socket Set ASCOT NO. MFG. NO. 163-01152 1152M DESCRIPTION 1/2” Drive 14-Piece Metric Standard Set 1/2” DRIVE EXTRA THIN WALL 9-PIECE SAE & METRIC WHEEL PROTECTOR SOCKET SET • Contains 6 (SAE Deep) Sockets: 3/4” (light green), 13/16” (purple), 7/8” (green), 15/16” (brown), 1” (silver) and 1-1/16” (black) • Contains 3 Metric Deep Sockets: 17mm (blue), 19mm (yellow) and 21mm (red) 1/2” DRIVE 14-PIE METRIC DEEP SE • Contains (Me 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 2 163-02849 163-01153 ASCOT NO. MFG. NO. 163-02849 2849 DESCRIPTION 1/2” Drive Extra Thin Wall 9-Piece SAE & Metric Wheel Protector Socket Set ASCOT NO. MFG. NO. 163-01153 1153MD DESCRIPTION 1/2” Drive 14-Piece Metric Deep Set

79 WHEEL SERVICE PRODUCTS IMPACT SOCKET SETS 1/2” DRIVE 29-PIECE METRIC AND SAE 6 POINT DEEP IMPACT SOCKET SET • Contains (Deep SAE) 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8” and 1-1/4” • Contains (Deep Metric) 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26 and 27mm • Contains (Deep Flip) 3/4” x 13/16” & 19mm x 21mm 3/4” DRIVE 5-PIECE METRIC STANDARD TRUCK SET • Contains (Metric Std) 4 pts. Budd wheel standard length, 17mm, 27mm, 30mm, 33mm, 35mm standard 163-0515 ASCOT NO. MFG. NO. 163-05153 1153DD DESCRIPTION 1/2” Drive 29-Piece Metric and SAE 6 Point Deep Impact Socket Set 1/2” DRIVE 39-PIECE METRIC AND SAE 6 POINT DEEP IMPACT SOCKET SET • Contains (Std) 7/16”, 1/2”,9 /16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16” and 1-1/2” • Contains (Deep) 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16” and 1-1/2” ASCOT NO. MFG. NO. 164-02185 2185M DESCRIPTION 3/4” Drive 5-Piece Metric Standard Truck Set 3/4” DRIVE 8-PIECE SAE DEEP SET • Contains (Deep SAE) 1”, 1-1/16”, 1-1/8”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2” 163-02668 164-02181 ASCOT NO. MFG. NO. 163-02668 2668 DESCRIPTION 1/2” Drive Master 39-Piece SAE Impact Socket Set ASCOT NO. MFG. NO. 164-02181 2181D DESCRIPTION 3/4” Drive 8-Piece SAE Deep Set

WHEEL SERVICE PRODUCTS IMPACT SOCKET SETS 1/2” DRIVE MASTER 39-PIECE METRIC IMPACT SOCKET SET • Contains (Metric Std) 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm,16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 26mm, 27mm and 30mm • Contains (Metric Deep) 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 26mm, 27mm and 30mm Universal Joint 3/4” DRIVE 10-PIECE TRUCK SET • Contains 13/16” Square, 1-1/16”, 1-1/8”, 1-1/4” Thin Wall Deep, 1-1/2” Budd Wheel, 17mm & 21mm Square, 33mm, 35mm & 41mm 80 164-02110 163-02669 ASCOT NO. MFG. NO. 163-02669 2669 DESCRIPTION 1/2” Drive Master 39-Piece Metric Impact Socket Set ASCOT NO. MFG. NO. 164-02110 2110 DESCRIPTION 3/4” Drive 10-Piece Truck Set 3/4” DRIVE 4-PIECE BUDD WHEEL SOCKET SET • Contains (Deep)1-1/2” hex x 13/16 square budd wheel impact socket, 35mm x 17mm square budd wheel impact socket, 41mm x 21mm square budd wheel impact socket and 33mm 4-PIECE IMPACT ADAPTER SOCKET SET • Contains 1/2” (F) x 3/4” (M) adapter, 3/4” (F) x 1” (M) adapter, 3/4” (F) x 1/2” (M) adapter, 1” (F) x 3/4” (M) adapter 164-04626 169-01234 ASCOT NO. MFG. NO. 164-04626 4626 DESCRIPTION 3/4” Drive 4-Piece Budd Wheel Socket Set ASCOT NO. MFG. NO. 169-01234 1234A DESCRIPTION 4-Piece Impact Adapter Socket Set

81 WHEEL SERVICE PRODUCTS IMPACT SOCKET SETS 3/4” DRIVE 5-PIECE METRIC STANDARD TRUCK SET • Contains (Metric Standard) 4 pts. budd wheel standard length, 17mm, 27mm, 30mm, 33mm, 35mm #5 SPLINE DRIVE 9-PIECE SAE TRUCK SET • Contains (SAE #5 Spline) 13/16”, 4 points budd wheel standard length, 7/8”, 15/16”, 1”, 1-3/16”, 1-1/2” deep with inside lip, 1-1/16”, 1-1/8”, 1-1/4” thin wall 164-02185 166-04191 ASCOT NO. MFG. NO. 164-02185 2185M 1” DRIVE 7-PIECE METRIC TRUCK SET • Contains (Deep) 17mm, 21mm, 4 pts. budd wheel standard length, 27mm, 33mm, 36mm, 41mm DESCRIPTION 3/4” Drive 5-Piece Metric Standard Truck Set ASCOT NO. MFG. NO. DESCRIPTION 166-04191 4191 1” DRIVE 9-PIECE LARGE TRUCK SOCKET SET • Contains (Deep) 13/16” & 15/16” square, 33mm, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” & 2-1/2” #5 Spline Drive 9-Piece SAE Truck Set 16 165-03197 ASCOT NO. MFG. NO. 165-03197 3197M DESCRIPTION 1" Drive 7-Piece Metric Truck Set ASCOT NO. MFG. NO. 165-03119 3119 DESCRIPTION 1” Drive 9-Piece Large Truck Socket Set

WHEEL SERVICE PRODUCTS IMPACT SOCKET SETS 1” DRIVE 10-PIECE TRUCK SET • Contains the following sizes: 13/16” square, 1-1/16”, 1-1/8”, 1-1/4” thin wall deep, 1-1/2” deep with inside lip, 17mm & 21mm square with inside lip, 33mm, 35mm & 41mm deep • Made in Taiwan 1” DRIVE 9-PIECE SAE TRUCK SET • Contains 13/16”, 4 points budd wheel standard length, 7/8”, 15/16”, 1”, 1-3/16”, 1-1/2” deep with inside lip, 1-1/16”, 1-1/8”, 1-1/4” thin wall deep 82 165-03190 165-03110 ASCOT NO. MFG. NO. 165-03110 3110 DESCRIPTION 1” Drive 10-Piece Truck Set ASCOT NO. MFG. NO. DESCRIPTION 165-03190 3190 1” Drive 9-Piece SAE Truck Set 1/2" DRIVE 4 PC. METRIC ULTIMATE TORQUE SOCKET SET • 17mm, 19mm, 21mm sock disc included in a blo increase in r Non-slip sock up to 7 • Use as an impac with the Ultima disc for added po ASCO 163-00440

83 WHEEL SERVICE PRODUCTS INDIVIDUAL IMPACT SOCKETS 3/4" DRIVE X 35MM X 17MM METRIC COMBINATION SOCKET • Removes and installs Budd-type wheel fasteners • Two openings eliminate the need for two separate sockets • CR-MO alloy steel for long life • Fully guaranteed • Made in Taiwan Ascot No. Mfg. No. 164-02235 Description 2235MC 3/4" Drive x 35mm x 17mm Metric Combination Socket 3/4" DRIVE X 41MM X 21MM METRIC COMBINATION SOCKET • Removes and installs Budd-type wheel fasteners • Two openings eliminate the need for two separate sockets • CR-MO alloy steel for long life • Fully guaranteed • Made in Taiwan • Available in 3/4" & 1" drive Ascot No. Mfg. No. 164-02241 165-03321 METRIC 163-10170 163-10182 163-10190 163-10210 SAE 163-10280 METRIC 163-10172 163-10174 163-10183 163-10191 163-10211 163-10223 SAE 163-10241 163-10282 METRIC 167-12110 167-12179 167-12910 167-12911 167-12912 167-18195 167-21215 167-21225 167-22225 SAE 167-12460 167-12461 167-12490 Description 2241MC 3321MC Ascot No. Mfg. No. 1017M 1018M 1019M 1021M 1028 Ascot No. Mfg. No. 1017MEDT 1018MEDT 1019MEDT 1021MEDT 1022MEDT 1024EDT 1028EDT Ascot No. Mfg. No. 1211D 1271DT 1291 1291D 1291DT 1A7535 1A7538 1A7542 1A7540 1246D 1246DT 1249D 3/4" Drive x 41mm x 21mm Metric Comb. Socket 1" Drive 41mm x 21mm Square Description Ascot No. Mfg. No. 1/2" Drive x 17mm Std. 1/2" Drive x 18mm Std. 1/2" Drive x 19mm Std. 1/2" Drive x 21mm Std. 1/2" Drive x 7/8" Std. Description 1/2" Drive x 17mm Extra Thin Wall 1017MEDTM 1/2" Drive x 17mm Extra Thin Wall Mercedes 1/2" Drive x 18mm Extra Thin Wall 1/2" Drive x 19mm Extra Thin Wall 1/2" Drive x 21mm Extra Thin Wall 1/2" Drive x 22mm Extra Thin Wall 1/2" Drive x 3/4" Extra Thin Wall 1/2" Drive x 7/8" Extra Thin Wall Description 1/2" Dr. x 11mm x 12mm Chrome Deep Flip 1/2" Dr. x 17mm x 19mm Deep Thin Flip 1/2" Dr. x 19mm x 21mm Std. Flip 1/2" Dr. x 19mm x 21mm Deep Flip 1/2" Dr. x 19mm x 21mm Deep Extra Thin Flip 1/2" Dr. x 18.5mm x 19.5mm Deep Flip 1/2" Dr/ x 21mm x 21.5mm Deep Flip 1/2" Dr. x 21.5mm x 22.5mm Deep Flip 1/2" Dr. x 22mm x 22.5mm Deep Flip 1/2" Dr. x 3/4" x 13/16" Deep Flip 1/2" Dr. x 3/4" x 13/16" Deep Extra Thin Flip 1/2" Dr. x 7/8" x 15/16" Deep Flip METRIC 163-10143 163-10171 163-01018 163-01019 163-01021 163-10222 163-10271 163-01032 163-01033 SAE 163-10201 163-01022 163-01024 163-01026 163-10281 163-10300 163-11032 163-01034 163-01036 163-10401 163-01048 163-15260 Ascot No. METRIC 164-20301 164-02021 164-02033 SAE 164-02038 164-02046 164-02024 164-02026 164-02034 1014MD 1017MD 1018MD 1019MD 1021MD 1022MD 1027MD 1032MD 1033MD 1020D 1022D 1024D 1026D 1028D 1030D 1032D 1034D 1036D 1040D 1048D 1526SD Mfg. No. 2030M 2021MS 2033MD 2038D 2046D 2024D 2026S 2034DT Description 1/2" Drive x 14mm Deep 1/2" Drive x 17mm Deep 1/2" Drive x 18mm Deep 1/2" Drive x 19mm Deep 1/2" Drive x 21mm Deep 1/2" Drive x 22mm Deep 1/2" Drive x 27mm Deep 1/2" Drive x 32mm Deep 1/2" Drive x 33mm Deep 1/2" Drive x 5/8" Deep 1/2" Drive x 11/16" Deep 1/2" Drive x 3/4" Deep 1/2" Drive x 13/16" Deep 1/2" Drive x 7/8" Deep 1/2" Drive x 15/16" Deep 1/2" Drive x 1" Deep 1/2" Drive x 1-1/16" Deep 1/2" Drive x 1-1/8" Deep 1/2" Drive x 1-1/4" Deep 1/2" Drive x 1-1/2" Deep 1/2" Drive x 13/16" Square 8-Point Description 3/4" Drive x 30mm Std. 3/4" Drive x 21mm Square 3/4" Drive x 33mm Deep 3/4" Drive x 1-3/16" Deep 3/4" Drive x 1-7/16" Deep 3/4" Drive x 3/4" Deep 3/4" Drive x 13/16" Square 3/4" Drive x 1-1/16" Deep Thin Wall 1/2" DRIVE 17MM EXTRA THIN WALL DEEP MERCEDES SOCKET • Features a 17mm x 6-point "flower petal design" • Works on 2012 and newer model year Mercedes Benz S-Class as well as those select 2007 and newer model year CL-Class, GL-Class, GLK-Class, GLS-Class and others that use 17mm convex "flower petal" lug bolts • Protective sleeve to prevent • Designed for use with 1/2-Inch Square Drives ASCOT NO. MFG. NO. DESCRIPTION 163-10174 1017MEDTM 1/2" Drive 17mm Extra Thin Wall Deep Mercedes socket ASCOT 1" DR. X 33MM LONG EXTRA THIN WALL DEEP SOCKET • Long 33 mm socket is designed so the nose of the 1” impact wrench does not vibrate against the hub which over time could lead to damage to the nose cone of the impact wrench • There is no loss of power to the 1” impact wrench as there is no need for an extension as this long socket is designed to the proper length of application • 6-point • CR-MO alloy steel for long life • Fully guaranteed • Made in Taiwan ASCOT NO. MFG. NO. 165-30330 DESCRIPTION 3033MDL 1/2" Drive 33mm Long Extra Thin Wall Deep Socket 166-30330 1/2" DR FLIP IMPACT SOCKETS 1/2" DR EXTRA THIN WALL IMPACT SOCKETS 1/2" DR STANDARD IMPACT SOCKETS

WHEEL SERVICE PRODUCTS Ascot No. SAE 165-03026 165-03030 165-03042 165-03046 165-03052 165-03056 165-03060 165-03323 165-30361 165-30380 165-30401 165-30402 165-30420 165-30481 165-30482 Mfg. No. 3026S 3030S 3042D 3046D 3052D 3056D 3060D 3323C 3036D 3038D 3040D 3040DT 3042DT 3048D 3048DR Ascot No. Mfg. No. METRIC 165-03021 165-30302 165-03033 165-03035 165-30381 165-30410 165-03041 165-03321 3021MS 3030MD 3033MD 3035MD 3038MD 3041MDT 3041MD 3321MC COUNTERACT SOCKET PRO • Deep impact sockets work in cases of corroded and rounded lug-heads for commercial wheel and fastener applications • Manufactured with quality chrome molybdenum alloy steel for superior torque and durability Description 1" Drive x 13/16" Square 1" Drive x 15/16" Square 1" Drive x 1-5/16" Deep 1" Drive x 1-7/16" Deep 1" Drive x 1-5/8" Deep 1" Drive x 1-3/4" Deep 1" Drive x 1-7/8" Deep 1" Drive 1-1/2" Hex x 13/16" Square 1" Drive x 1-1/8" Deep 1" Drive x 1-3/16" Deep 1" Drive x 1-1/4" Deep 1" Drive x 1-1/4" Deep Thin Wall 1" Drive x 1-5/16" Deep Thin Wall 1" Drive x 1-1/2" Deep w/ Inside Lip 1" Drive x 1-1/2" Deep - Standard Description 1" Drive x 21mm Square 1" Drive x 30mm Deep 1" Drive x 33mm Deep 1" Drive x 35mm Deep 1" Drive x 38mm Deep 1" Drive x 41mm Deep Thin Wall 1" Drive x 41mm Deep 1" Drive 41mm x 21mm Square INDIVIDUAL IMPACT SOCKETS Ascot No. 169-01003 169-01005 169-01020 169-02006 169-02010 169-02030 169-20100 169-02013 169-03006 169-03010 169-03013 169-03020 169-04010 169-01002 Mfg. No. 1003E 1005E 1020A 2006E 2010A 2030A 2010E 2013E 3006E 3010E 3013E 3020A 4010A 1002E Description 1/2" Drive x 3" Extension 1/2" Drive x 5" Extension 1/2" Drive Female x 3/4" Male Adapt. 3/4" Drive x 6" Extension 3/4" Drive Female x 1/2" Male Adapt. 3/4" Drive Female x 1" Male Adapt. 3/4" Drive x 10" Extension 3/4" Drive x 13" Extension 1" Drive x 6" Extension 1" Drive x 10" Extension 1" Drive x 13" Extension 1" Drive Female x 3/4" Male Adapt. #5 Spline Female x 3/4" Male Adapt. 1/4" Drive x 2" Chrome Extension 84 Ascot No. METRIC 166-04033 SAE 166-04026 166-04038 166-04042 166-04323 Mfg. No. 4033MD 4026S 4038 4042DT 4323C Description #5 Spline x 33mm Deep #5 Spline x 13/16" Square #5 Spline x 1-3/16" Std. #5 Spline x 1-5/16" Deep Thin Wall #5 Spline x 13/16" Square x 1-1/2" Hex ASCOT NO. MFG. NO. 451-50033 451-50005 451-50010 451-50011 CBBS1-33 CBBS1-S5 CBBS1-S10 CBBS34-S10 DESCRIPTION 1" Drive 33mm 5-Piece Set - 1" Drive 17mm, 27mm, 30mm, 33mm, 35mm 10-Piece Set - 1" Drive 13/16", 1-1/16", 1-1/8", 1-1/4", 1-1/2", 17mm, 21mm, 33mm, 35mm, 41mm 10 Piece Set - 3/4" Drive 13/16", 1 1/16", 1 1/8", 1 1/4", 1 1/2", 17mm, 21mm, 33mm, 35mm, 41mm 1" DR METRIC 1" DR SAE IMPACT SOCKETS IMPACT SOCKETS

WHAT IS TORQUE? Torque is the measurement of twisting force that is applied to a lug nut to create bolt tension. QUALITY AND INNOVATION SINCE 1908 WHEEL TORQUE PRODUCTS // WHEEL SERVICE PRODUCTS 89  Torque Sockets, Torque Limiting Socket Set WHEEL SERVICE PRODUCTS WHAT IS CLAMPING FORCE? Clamping force is the result of bolt tension and it is the physical property that holds the wheels on the vehicle. DOES THE CORRECT TORQUE GUARANTEE THE CORRECT CLAMPING FORCE? No. Clamping force cannot be measured in the field, so technicians must use the correct torque to approximate the amount of clamping force. TORQUE MULTIPLIERS Since there are a number of factors that determine how much clamping force is generated per foot pound of torque, technicians should always follow the RIST procedure developed by the Tire Industry Association (TIA). R I S T TORQUE SPECIFICATIONS Hub-Pilot Wheel: 450-500 ft/lbs. oiled | Stud-Pilot Wheel: 450-500 ft/lbs. dry | Demountable Rim: 200-260 ft/lbs. dry TIA is the industry leader in commercial truck tire and wheel service education. Since Occupational Safety and Health Administration (OSHA) Regulation 29 CFR 1910.177 requires training for all employees that service truck tires, fleets must make sure that every technician who installs, removes or handles truck tires in any way has compliant training. TIA developed the Fleet Tire Service OSHA Compliance Program so the trucking industry could provide in-house technician training that exceeds the minimum requirements established by 29 CFR 1910.177. For more information on TIA training or the RIST procedure, visit TIA’s website: http://www.tireindustry.org/training.asp or call 800-876-8376, ext. 106. 495-96353 495-96355 495-96361 495-96395 96353 96355 96361 96395 25-250 In.-lbs. (1 In.-lbs.) 100-600 In.-lbs. (5 In.-lbs.) 20-200 In.-lbs. ( 1 In.-lbs.) 10-80 In.-lbs. (In.-lbs. ) 1/2" Ratchet 3/4" Ratchet 1/4" Ratchet 3/8" Flexhead 17.6 inches 0.5 1.5 2.2 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION 20.0 inches 38.5 inches 12.4 inches 2 stands for snug the lug nuts in a star pattern stands for remove debris from mating surfaces stands for inspect all of the components stands for torque the fasteners to specification ASCOT SUPPLY CORPORATION BUYER'S GUIDE ® WHEEL SERVICE PRODUCTS // WHEEL TORQUE PRODUCTS WHEEL SERVICE PRODUCTS Call for availability on complete TIA torque procedures

WHEEL SERVICE PRODUCTS TORQUE WRENCHES & ACCESSORIES ASCOT LUG NUT TORQUE APPLICATION CHART • Wall chart measuring 26-3/4" x 39-1/4" • Provides lug nut specifications for cars and light trucks • For use with Original Equipment wheels • Laminated for durability • Updated chart available annually every summer! *Appearance of chart may vary POSTER SIZE SPLIT BEAM TORQUE WRENCHES • +/-4% accuracy • Non coil-spring mechanism, no need to return to zero after use, which results in longer tool life • Knob-type torque adjustment for faster and energy saving efficiency • Torque setting easily read through the window scale • TPR cushion handle is oil resistant, the handle provides comfort and ease of control • Loud click sound and strong impulse when required torque is reached 86 ASCOT NO. MFG. NO. DESCRIPTION 168-00250 250-SB 168-00600 600-SB 1/2" Drive 250 ft./lb. Split Beam Torque Wrench 3/4" Drive 600 ft./lb. Split Beam Torque Wrench FLEX HINGE STYLE TORQUE WRENCH 168-02026 ASCOT NO. MFG. NO. DESCRIPTION 168-02026 TC2026 Lug Nut Torque Application Chart 1/2" DRIVE TORQUE WRENCH • Dual direction • Locking collar prevents accidental setting adjustment • Easy-to-read laser marked scale • Blow molded case with calibration certificate • RANGE: 25-250 ft./lb. • OVERALL LENGTH: 25" ASCOT NO. 168-00425 MFG. NO. DESCRIPTION AS-425 1/2" Drive Torque Wrench 1/4" DRIVE TORQUE WRENCH • Easy-to-read and set for error-free adjustments • Automatic locking torque adjustment • Ideal for TPMS applications • Blow molded case • RANGE: 10-150 in./lbs. ASCOT NO. 168-00652 MFG. NO. DESCRIPTION AS-652H 1/4" Drive Torque Wrench ASCOT NO. MFG. NO. 168-60011 168-60012 60011 60012 DESCRIPTION 600 ft./lb. Flex Hinge Style Torque Wrench 2-Piece 600 ft./lb. Flex Hinge Style Torque Wrench • Robust construction • ACCURATE RESULTS: ±4% • Adjustable torque settings • DUAL SCALED: ft./lb. and N.m • The large break angle improves accuracy by reducing the possibility of over-torquing • Cam control of the mechanism gives a controlled break • Every wrench supplied with a calibration certificate • Durable storage case • 2 ADAPTERS INCLUDED: 3/4" to 1", 3/4" to 3/4" 168-00425 168-00652 168-00250 168-00600 168-60012 168-60011

87 WHEEL SERVICE PRODUCTS TORQUE WRENCHES & ACCESSORIES ASCOT 6-PIECE WHEEL TORQUE WRENCH SET • One-way, not bi-directional • +/- 4% accuracy • Cushioned ratchet head • Color coded presets • Wrenches included: Yellow, Blue, grey, white, aqua and adjustable torque wrench • 1/2" Drive Sockets Included: 17mm, 19mm, 21mm, 3/4",13/16" 7/8", and a 6" extension • Made In Usa ASCOT 4-PIECE WHEEL TORQUE WRENCH SET • One-way, not bi-directional • +/- 4% accuracy • Cushioned ratchet head • Color coded presets • Wrenches included: Blue, Grey, White and Aqua • 1/2" Drive Sockets Included: 17mm, 19mm, 21mm, 3/4",13/16" 7/8", and a 6" extension • Made In Usa 168-13000 168-16000 ASCOT NO. MFG. NO. 168-16000 16000 DESCRIPTION 6-Piece Preset/Adjustable (5 Preset - 1 Adjustable) Wheel Torque Wrench Set ASCOT WHEEL TORQUE WRENCHES ASCOT NO. MFG. NO. DESCRIPTION 168-12065 168-12080 168-12100 168-12120 168-12140 168-12250 168-96509 65TP-3R 80TP-3R 100TP-3R 120TP-3R 140TP-3R 2503MFRRH 96-500-9RK 65 ft./lb. Preset Torque Wrench (Yellow) 80 ft./lb. Preset Torque Wrench (Blue) 100 ft./lb. Preset Torque Wrench (Grey) 120 ft./lb. Preset Torque Wrench (White) 140 ft./lb. Preset Torque Wrench (Aqua) 250 ft./lb. Micro-Adjustable Torque Wrench Preset Torque Wrench Ratchet Head Repair Kit ASCOT NO. MFG. NO. 168-13000 13000 DESCRIPTION 4-Piece Preset Wheel Torque Wrench Set 168-12250 168-12140 168-12120 168-12100 168-12080 168-12065

WHEEL SERVICE PRODUCTS TORQUE WRENCHES & ACCESSORIES PRESET VALVE NUT TORQUE WRENCHES • Wrench flexes when proper torque setting is reached • Prevents overtightening of the valve grommet • Cushioned handle • Sizes and preset torque settings laser etched on shaft • +/- 4% accuracy 168-00916 168-00058 MICRO-ADJUSTABLE TORQUE WRENCH ASCOT NO. MFG. NO. 168-00058 168-00916 DESCRIPTION NSPTW58 5/8" Preset Torque Wrench for TR540550 Series Valve Hex Nuts NSPTW916 9/16" Preset Torque Wrench for TR570 Series Valve Hex Nuts TORQUE WRENCH SQUARE DRIVES & EXTENSIONS 169-13413 20 ASCOT NO. MFG. NO. 168-60020 168-60025 169-02013 169-03013 169-13413 12299 12297 2013E 3013E 13413E DESCRIPTION 1" Square Drive for Flex Hinge Torque Wrench 3/4" Square Drive for Flex Hinge Torque Wrench 3/4" Drive x 13" Impact Extension 1" Drive x 13" Impact Extension 3/4" Drive x 1" Drive x 13" Impact Extension WHEEL MOUNTING SET 11 PIECES • Includes torque wrenches for cars/ with 40-200 Nm • Bag for storing the wheel bolts until the next wheel change • Tread depth gauge with marking of the tread depths 1.6 mm, 3 mm and 4 mm (min./summer/winter according to the currently prescribed minimum tread depths • Chalk for marking/inscribing the mounting/ dismounting position of the wheel • Robust plastic case with metal hinges and lock for easy and safe transport ASCOT NO. MFG. NO. 168-47501 1-475 168-47502 168-96111 1-4752P 9610-0111RK DESCRIPTION 1" Drive x 475 ft./ lb. Preset Torque Wrench - USA 2 Pc. 1” Dr. 475 Ft/Lb Preset Torque Wrench 1" Torque Wrench Repair Kit ASCOT NO. MFG. NO. 168-12250 DES 2503MFRRH 1/2" Driv Tor • Dual scale, calibrated dual direction • Positive lock with spring loaded pull down lock ring • Fast, accurate and eas to set • Easy-to-read Laser mark scale • Ergonomic comfort-grip • Mos feature Quick Release buttons which provide good socket retention as w as easy socket removal • RANGE: 50-250 ft./lb. • ACCURACY: ± 4% clockwise ± 6% CCW of indicated v CW, from 20% to 100% of full sc DUAL SCALE 88 PRESET TRUCK CLICKER STYLE TORQUE WRENCH • Preset at 475 ft./lb. • Designed for fleet applications • Massive 4-1/2' length for high torque applications • Supplied with handy storage bag for sockets and extensions • Both the wrench and the bag have reflective strips for saf highway night use • Made in Taiw • 2-Piece similar to snap-on 1-4 168-47501 168-47502 ASCOT NO. MFG. NO. 168-33004 DESCRIPTION 3300400 Wheel Mounting Set 11 Pieces

89 WHEEL SERVICE PRODUCTS TORQUE WRENCHES & ACCESSORIES CORDLESS TORQUE WRENCH • Easy pairing to any Apple iOS or Google Android device to program torque, angle, or both without the need for a Wi-Fi network • Steel-reinforced motor housing • Cool under pressure, the internal fan operates independently of the drive motor enabling repeated high-torque operation without overheating bolt after bolt performance • Tighten up to 300 bolts to 995 ft-lbs per charge on the IQV® 40 Series battery EVO-TORQUE BATTERY TOOLS • Patent pending cooling system allows for continuous operation under heavy use, maintaining optimal performance • Best-in-class Norbar-designed gearbox ensures reliability and durability in the toughest environments • Ergonomic and lightweight design improves operator comfort and makes it easier to handle in confined spaces • Up to 20% more compact design for enhanced portability and ease of use • Clear top-mounted display provides real-time torque data and allows for quick and easy adjustments to settings • ‘Safe to Start’ feature minimises the risk of accidental activation, increasing safety in the workplace • Powered by an 18V, 5.0 Ah battery, providing excellent fastener performance and extended battery life per charge • Supplied with 2 batteries, 1 single-bay battery charger, cranked reaction, operator’s manual, and a convenient carry case 168-18147 168-07600 ASCOT NO. MFG. NO. 168-50116 DESCRIPTION QXXD5P 01KPW16K2 Cordless Torque Wrench ASCOT NO. MFG. NO. 168-18147 168-18143 181477 181473 DESCRIPTION EvoTorque Battery Tool EvoTorque Battery Tool TORQIT TORQUE WRENCH, 1,000 FT/LBS, 3/4" DRIVE, WITH 6" NOSE EXTENSION • Durable and Portable Precision Torque • 240 – 1,000 ft/lbs • Accuracy of +/- 5% • Lithium Ion 8.0 Ah Rechargeable Battery • Every Unit Calibrated In ISO17025 Laboratory • 13-Month Warranty from date of purchase • Made in the USA • Weight: 16.5 lbs (7.5 kg) • Kit includes 2x batteries and charger PNEUMATIC TORQUE MULTIPLIER • OPERATING RANGE: 147 to 738 ft./lb. (200 to 1000 Nm) • ‘Soft Start’ trigger control aids socket location, and allows gradual and safe reaction location • Extended reaction is ideal for reaching recessed nuts • FAST: 1000 Nm version has a free speed of 140 rpm • For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator • Light weight • NON IMPACTING: Low vibration levels make these tools comfortable and safe to use • On Bi-Directional tools, the direction control knob is locked while the tool is running to prevent accidental damage to the gearbox • QUIET: Less than 85 dB(A) when under load • Square drive is quickly and easily replaceable 168-18141 ASCOT NO. MFG. NO. 168-67510 168-67518 67518 DESCRIPTION 67510-CTK TorqIt Battery-Powered Torque Wrench Socket-To-Socket Reaction Arm ASCOT NO. MFG. NO. 168-18141 DESCRIPTION PTME-72-2000-B 1" Square Drive Bi-Directional Pneumatic Multiplier

WHEEL SERVICE PRODUCTS TORQUE WRENCHES & ACCESSORIES SPLIT-BEAM CLICK TORQUE WRENCHES • EXTREMELY ACCURATE: within 4% of reading from 20% of full scale to full scale • Setting torque on adjustable wrenches is fast and easy because there is no spring tension on the adjustment knob • Torque setting locks on adjustable wrenches for repetitive applications • Wrench length designed to provide the leverage required for maximum torque applications. Also provides the needed reach for those hard to get at places ASCOT NO. MFG. NO. 168-02100 168-03250 168-02500 168-03251 C2FR100F C3FR250F C2FR50F CP3FR250F DESCRIPTION FT./LB. 3/8" Drive 1/2" Drive 3/8" Drive 1/2" Preset 100 250 10-50 250 SPLIT-BEAM CLICK TORQUE WRENCHES 168-03250 MADE IN THE USA INDUSTRIAL TORQUE WRENCH • Norbar's New Industrial Torque Wrench • SPLIT DESIGN: Allows for easy, behindthe-seat storage in service vehicles • SMALLER CARRYING CASE: Easy to transport, and less expensive to ship back-and-forth for calibration and service • Removal of calibrated nuts means less expensive to calibrate • Adjusting scale in the handle is large and easy to read • Calibration is as easy as replacing the paper scale with a new paper scale • Ratchets are no longer a welded component, making them replaceable when worn or damaged - this means fewer wrenches scrapped • Operator handle designed to ‘guide’ the technicians hand into the proper position 90 168-04400 ASCOT NO. MFG. NO. 168-04400 168-05600 C4D600F36H 3/4" Drive C5D600F36H 1" Drive NORBAR TRUCHECK2 168-43528 • Allows torque tool performance to be monitored and tools kept in peak condition • Limited settable options, Ideal for non-expert users with click type torque wrenches • Inbuilt Micro USB 2.0 port enables power from any USB power source • Software can be updated remotely, without the need to return the product to Norbar • Supplied with traceable calibration certificate in clockwise direction. A counter-clockwise calibration is available at additional cost ASCOT NO. MFG. NO. 168-43528 43528 DESCRIPTION Norbar TRUCHECK2 Torque Wrench Checker DESCRIPTION FT./LB. 600 600 168-42760 ASCOT NO. MFG. NO. 168-42760 168-42762 168-42761 120110 120110.01 120115.01 DESCRIPTION 4AR-N, 3/4" Drive, 150–600 ft./lb. Range 4AR-N, 1" Drive, 150–600 ft./lb. Range 5R-N 1" Drive Ratchet Adjustable (Dual Scale)

91 WHEEL SERVICE PRODUCTS TORQUE SOCKETS & EXTENSIONS 1" DRIVE 4 PC. HEAVY DUTY TORQUE SOCKET SET • Sockets properly torque wheel nuts to exact factory specs • Prevents warping of rotors, which causes brake pulsation • Eliminates broken studs and nuts• Avoids damage to aluminum alloy wheels • Stops customer complaints about overtightened lug nuts • Sockets stop turning at the CORRECT torque • Includes blow mold case • Made in Taiwan ASCOT NO. MFG. NO. 168-04994 SO4994 DESCRIPTION 4-Piece 1" Drive Truck Torque Socket Set. SET INCLUDES: 1-1/4" 1" Drive Torque Hex 250 ft./lb. Red, 33mm 1" Drive Torque Hex 475 ft./lb. Brown, 1-1/2" 1" Drive Torque Hex 475 ft./lb. Black; 13/16" 1" Drive Torque Sq. 475 ft./lb. Yellow 168-04994 ASCOT NO. MFG. NO. DESC. DRIVE SIZE 495-30908 KTI30908A HD Red 495-30909 KTI30909A HD Brown 495-30910 KTI30910A HD Black 495-30911 KTI30911A HD Yellow 495-30913 KTI30913A HD Grey 495-30914 KTI30914A HD Grey 495-30918 KTI30918A HD Red 1" 1" 33mm 1-1/2" 13/16" TORQUE OTHER MEDIUM/HEAVY DUTY TORQUE SOCKETS: KIT CONTENTS 1-1/4" 1" 1" 3/4" 495-30919 KTI30919A HD Brown 3/4" 1" 33mm 1" 33mm 1-1/4" 33mm 250 ft./lb. 475 ft./lb. 475 ft./lb. 475 ft./lb. 550 ft./lb. 550 ft./lb. 250 ft./lb. 475 ft./lb. Extended HEAVY DUTY TRUCK TORQUE EXTENSIONS • Heavy duty truck extensions can convert sockets into Torque Sockets • Available in 3/4" and 1" drives 1" DRIVE TRUCK TORQUE EXTENSIONS • 1" drive square ends • Once the proper torque is reached the extension will absorb any excess torque A B C D E F ASCOT NO. 495-16004 A 495-16005 495-16006 B C E F 495-16007 D 495-16008 495-16009 ITEM MFG. NO. DESCRIPTION 1600-P 1600-R 1600-S 1600-T 1600-Y 1" Drive 475 ft./lb. Torque Limiting Extension 1" Drive 250 ft./lb. Torque Limiting Extension 1" Drive 350 ft./lb. Torque Limiting Extension 1" Drive 175 ft./lb. Torque Limiting Extension 1600-W 1" Drive 650 ft./lb. Torque Limiting Extension 1" Drive 550 ft./lb. Torque Limiting Extension ASCOT NO. MFG. NO. 495-16000 495-16001 495-16002 495-16003 495-16014 495-16015 495-16016 495-16017 Heavy Duty Truck Torque Extensions DESCRIPTION LT1600M LT1600N LT1600Q LT1600U LT1600P LT1600R LT1600S LT1600T 3/4" Dr. Truck Torque Extension - 475 ft./lb. 3/4" Dr. Truck Torque Extension - 250 ft./lb. 3/4" Dr. Truck Torque Extension - 175 ft./lb. 3/4" Dr. Truck Torque Extension - 350 ft./lb. 1" Drive Truck Torque Extension - 475 ft./lb. 1" Drive Truck Torque Extension - 250 ft./lb. 1" Drive Truck Torque Extension - 350 ft./lb. 1" Drive Truck Torque Extension - 175 ft./lb.

WHEEL SERVICE PRODUCTS 1/2" DR 5-PIECE TORQUE EXTENSION SET • Set includes all 5 extension sockets listed below • Provides the ability to torque wheel nuts on passenger cars to the c specification • Set comes in a durable plastic blow molded case • Individual extensions sold separ ASCOT NO. 168-12450 MFG. NO. DESCRIPTION 2450 ASCOT NO. MFG. NO. 168-12465 168-12480 168-12410 168-12412 168-12414 2465 2480 24100 24120 24140 1/2" DR 5-Piece Torque Extension Set DESCRIPTION 1/2" DR 5-PIECE TORQUE EXTENSION SET: KIT CONTENTS 65 ft./lb. Extension - Yellow 80 ft./lb. Extension - Blue 100 ft./lb. Extension - Gray 120 ft./lb. Extension - White 140 ft./lb. Extension - Aqua 10-PIECE 1/2" DRIVE TORQUE LIMITING SOCKET SET • Contains the most popular torque sockets to service the majority of passenger cars and light trucks • SET INCLUDES: All 10 torque sockets listed below • Lifetime warranty • Heavy duty blow molded case • Lug nut torque application chart included ASCOT NO. MFG. NO. 168-02880 12880 DESCRIPTION 10-Piece Torque Limiting Socket Set ASCOT NO. MFG. NO. DESCRIPTION 10-PIECE 1/2" DRIVE TORQUE LIMITING SOCKET SET: KIT CONTENTS 168-21755 168-21780 168-21910 168-21965 168-21980 168-22180 168-22212 168-22214 168-22610 168-23014 121755M 1/2" Drive 17mm - 55 ft./lb. Torque Socket - Green 121780M 1/2" Drive 17mm - 80 ft./lb. Torque Socket - Red 1/2" Drive 19mm (3/4") - 100 ft./lb. Torque Socket - Gray 121910M 121965M 1/2" Drive 19mm (3/4") - 65 ft./lb. Torque Socket - Yellow 121980M 1/2" Drive 19mm (3/4") - 80 ft./lb. Torque Socket - Blue 122180M 1/2" Drive 21mm - 80 ft./lb. Torque ocket - Light Brown 122212M 1/2" Drive 22mm (7/8") - 120 ft./lb. Torque Socket - White 122214M 1/2" Drive 22mm (7/8") - 140 ft./lb. Torque Socket - Turquoise 1/2" Drive 13/16" - 100 ft./lb. Torque Socket - Brown 1/2" Drive 15/16" - 140 ft./lb. Torque Socket - Light Green 122610 123014 168-12450 TORQUE SOCKETS & EXTENSIONS 92 1" DRIVE 33MM TORQUE SOCKET • Brown Torq stick • 1" in. drive torque socket hex 33mm • 475 ft/lbs. • Solid one-piece construction • Covered by a lifetime warranty • Made in Taiwan 3/4" DRIVE 33MM TORQUE SOCKET • Brown Torq stick • 3/4 in. drive torque socket hex 33mm • 475 ft/lbs. • Solid one-piece construction • Covered by a lifetime warranty • Made in Taiwan ASCOT NO. MFG. NO. 168-01475 168-00475 DESCRIPTION 334031L7 1" Drive 33mm Torque Socket Hex 475ft/lb Brown 334030L7 3/4" Drive 33mm Torque Socket Hex 475ft/lb Brown 3/4" Drive 168-00475 1" Driv 168-01475

93 WHEEL SERVICE PRODUCTS LOOSE NUT PREVENTION CHECKPOINT LOOSE LUG NUT INDICATORS* • A simple and cost-effective solution that helps prevent a catastrophic loss caused by loose lug nuts when used as part of a total torque program • When fitted on properly torqued lug nuts and inspected by a driver or technician, CHECKPOINT clearly and visually indicates if the wheel nuts have moved • If the arrows have moved from the point-topoint or daisy-chain pattern, this indicates that they have loosened and need attention • Facilitates the driver’s check for lug nut movement • Early warning for mechanic or driver of excessive heat caused by possible brake or bearing problems; designed to melt in excessive heat • Demonstrates fleet’s commitment to vehicle road worthiness and safety to the public 2X THE TEETH SIMPLE & EASY TO USE 402-20019 402-20020 402-20021 402-20078 402-20023 402-20024 402-20001 402-20026 402-20027 402-20028 402-20029 402-20030 402-20114 402-20032 402-20033 402-20034 402-20035 402-20036 402-20015 The CHECKPOINT Loose Lug Nut Indicators in use. 402-20040 402-20041 402-20044 402-20046 CKPOINT Loose Lug Nut Indicators t guarantee wheel-offs will not occur. CPY19MM CPY20MM CPY21MM CPY22MM CPY23MM CPY24MM CPY25MM CPY26MM CPY27MM CPY28MM CPY29MM CPY30MM CPY31MM CPY32MM CPY33MM CPY34MM CPY35MM CPY36MM CPY38MM CPY40MM CPY41MM CPY44MM CPY46MM ASCOT NO. MFG. NO. 402-20017 402-20018 CPY17MM CPY18MM DESCRIPTION CHECKPOINT CHECKPOINT 17mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 18mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 19mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 20mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 21mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 22mm (7/8") Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 23mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 24mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 25mm (1") Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 26mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 27mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 28mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 29mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 30mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 31mm (1-1/4") Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 32mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 33mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 34mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 35mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 36mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 38mm (1-1/2") Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 40mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 41mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 44mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 46mm Fluorescent Yellow Loose Lug Nut Indicator

WHEEL SERVICE PRODUCTS LOOSE NUT PREVENTION CHECKLINK WHEEL NUT INDICATORS & RETAINERS CHECKPOINT ASCOT NO. MFG. NO. 402-21019 402-21021 402-21022 402-21030 402-21031 402-21032 402-21033 402-21036 402-21038 402-21040 402-21041 402-21044 402-21046 402-20133 402-20333 402-23133 402-24027 402-24028 402-24030 402-24032 402-24033 402-24038 402-24133 402-25032 402-25033 402-25133 402-25021 402-25022 DUSTITE DESCRIPTION CHECKPOINT ORANGE HI-TEMP LOOSE LUG NUT INDICATORS CPOHY19MM CPOHY21MM CPOHY22MM CPOHY30MM CPOHY31MM CPOHY32MM CPOHY33MM CPOHY36MM CPOHY38MM CPOHY40MM CPOHY41MM CPOHY44MM CPOHY46MM CHECKPOINT 19mm CHECKPOINT 21mm CHECKPOINT 22mm CHECKPOINT 30mm CHECKPOINT 31mm CHECKPOINT 32mm CHECKPOINT 33mm CHECKPOINT 36mm CHECKPOINT 38mm CHECKPOINT 40mm CHECKPOINT 41mm CHECKPOINT 44mm CHECKPOINT 46mm POINT TO POINT CPCYPP33MM CPTRPP33MM CHECKPOINT Caution Yellow Point to Point 33MM Loose Lug Nut Indicator CHECKTORQUE Point to Point 33MM Red Loose Lug Nut Indicator CPOHTPP33MM Checkpoint Point to Point 33MM Orange Hi-Temp Loose Lug Nut Indicator DUSTITE YELLOW LOOSE LUG NUT INDICATORS Dustite Yellow 27mm Dustite Yellow 28mm Dustite Yellow 30mm Dustite Yellow 32mm Dustite Yellow 33mm Dustite Yellow 38mm CPDTY27MM CPDTY28MM CPDTY30MM CPDTY32MM CPDTY33MM CPDTY38MM CPDTSG33MM Dustite Silver Gray 33mm Loose Lug Nut Indicator DUSTITE LONG REACH CPDTLRY32MM Dustite Long Reach Yellow 32mm Loose Lug Nut Indicator CPDTLRY33MM Dustite Long Reach Yellow 33mm Loose Lug Nut Indicator CPDTLRSG33MM Dustite Long Reach Silver Gray 33mm Loose Lug Nut Indicator CPDTLRY21MM CPDTLRY22MM Dustite Long Reach Yellow 21mm Loose Lug Nut Indicator Dustite Long Reach Yellow 22mm Loose Lug Nut Indicator *The use of CHECKPOINT Loose Lug Nut Indicators does not guarantee wheel-offs will not occur. ASCOT NO. MFG. NO. 402-62600 62600 DESCRIPTION 3 1/2" Spacing, 350 degrees The Lug Lock Wheel Nut Retainers in use. FLEXIBLE & EASY TO INSTALL 40 Other sizes and colors available. 402-26021 ASCOT NO. MFG. NO. 402-26021 402-26022 402-26033 402-26038 CLY21 CLY22 CLY33 CLY38 DESCRIPTION Checklink Wheel Nut Indicator & Retainer 21mm Checklink Wheel Nut Indicator & Retainer 22mm Checklink Wheel Nut Indicator & Retainer 33mm Checklink Wheel Nut Indicator & Retainer 38mm LUG LOCK WHEEL NUT RETAINERS - AME ZAFETY • Use the resistance between two nuts to minimize their ability to rotate and loosen • Flexible and easy to install, fits over two adjacent nuts • Field tested at high and low rotation levels • Lab tested in severe vibration conditions • APPLICATION: Designed to be used on wheels with 33mm nuts on 3.5" stud centers • Compatible with a complete wheel mounting safety program DUSTITE LONG REACH • Dual-purpose wheel nut indicator and retainer • Visual indicator of wheel nut movement • Helps prevent loosening of wheel nuts • Indicates possible faults with brakes or bearings through melting • Melts at a specific temperature of 125ºC/257ºF • Supports fleet safety checks • The world’s first biodegradable wheel nut indicators • 50 pcs. per bag 94 FIELD TESTED

95 WHEEL SERVICE PRODUCTS WHEEL CENTERING PRODUCTS WHEEL CENTERING PRODUCTS FOR HUB PILOTED WHEELS 1 Increases fuel mileage 2 Increases tire life 3 Decreases tire vibration 4 Cuts rebalancing costs 5 Reduces “wheel-off” condition 6 Reduces tire cupping Wheel Vibrations? Wheel Hop? Brake Pedal Pulsations? Erratic Tire Wear? Excessive Fuel Consumption? If you are experiencing these problems, it may be because your wheels aren’t centered on the hub. And if your wheels aren’t centered, you will continue to experience these problems. With Specialty Products’ Wheel Centering Products, you can re-center your wheel, and eliminate all of these problems. Our new threadless design allows the installer to quickly and easily center the wheels to the hub. And our tapered design makes it easy to mount the wheel over the hub. Hub pilot wheel sitting off-center on wheel holes can create gaps ASCOT NO. MFG. NO. 491-32111 32111 DESCRIPTION “EZ On” Wheel Centering Tool Set “EZ ON” WHEEL & BRAKE DRUM CENTERING SLEEVES Wheel stud and wheel hole gap can create spaces or gaps between wheel and hub pilot When the wheel rests on the upper hub pilot this produces a gap at the other pilots resulting in an off-center condition. This causes wheel vibration and erratic tire wear. • These sets center both steer axle HD wheels and brake drums to minimize wheel vibrations, brake pedal pulsations and wheel hop • APPLICATION: For both Aluminum and Steel steer wheels and a variety of brake drum types “EZ ON” WHEEL CENTERING TOOL SET Simply slide the 3 centering tapered tools over the wheel studs at the 12, 8, and 4 o’clock positions; mount wheel and add lugnuts; remove the tools and replace remaining lugnuts, torquing to manufacturer specifications. The wheel is now completely centered. Problem Solved! • Threadless Design • Saves Installa Time • Tapered Nose • Eases Wheel Mounting • Single Set • APPLICA For Steer, Drive & Trailer Axles How it works 491-32120 If your hub piloted wheel is sitting on the hub stud off-center (as shown in the illustration) you need these parts and tools to avoid wheel hop and excess tire wear, and to increase your fuel mileage. The theory behind the hub pilot is it centers the wheel. The fact is gravity causes the weight of the wheel to rest only on the upper pilots creating a gap in the bottom pilots. Even the smallest gap results in an egg shaped motion upon rotation. This uneven motion creates rolling resistance which causes tire vibration, increased fuel consumption and erratic tire wear. The bottom line is, you can’t balance an egg. 491-32124 491-32121 ASCOT NO. MFG. NO. 491-32120 491-32121 491-32124 32120 32121 32124 DESCRIPTION Aluminum 1.25" hole/.5" depth Aluminium 1.25" hole/.25" to .3125" depth Steel 1.25" hole/.5" depth

WHEEL SERVICE PRODUCTS O-LINE-ER WHEEL STUD ALIGNMENT TOOL • Makes it easy to line up wheel studs with holes in rim for easy installation • Decreased installation time • Increase worker productivity • Reduce risk of injury from struggling with heavy tires and rims ASCOT NO. MFG. NO. 491-00101 DESCRIPTION GTO-01TB O-Line-Er Wheel Stud Alignment Tool WHEEL CENTERING PRODUCTS 491-00101 The O-Line-Er Wheel Stud Alignment Tool makes it easy to line up wheel studs with holes in rim for easy installation. 96 “SOLUTION A” WHEEL CENTERING PIN SETS “SOLUTION B” INTERNAL CENTERING SLEEVES • Reusable Shop Tool • Hardened Steel • Threaded Inside for Easy Removal • Sold in sets of 3 with storage case ASCOT NO. MFG. NO. 491-02666 A-2666 DESCRIPTION Steer & Drive axles, 5" length, Steel & Aluminum wheels, will center 1" brake drums 491-01573 A-1573 Steer & Drive axles and some trailers, 4" length, Steel & Aluminum Wheels 491-01339 A-1339 Steer axles, 3" length, Steel & Aluminum wheels ASCOT NO. 491-01825 MFG. NO. B-1825-CON-A DESCRIPTION 1.34-1.37" diameter hole, 1/2" hole depth 107507 10005331 10005332 10009920 ASCOT NO. 491-01860 491-01339 491-01573 491-02666 ASCOT NO. 491-01594 MFG. NO. B-1594-CA DESCRIPTION 1.25" Diameter Hole, 1/4" Hole Depth GUNITE # 9001X 9000X 9035X MOTOR WHEEL CENTRIFUSE # ARVIN MERITOR # 90089BK 89870BK 90174BK 91265B 90600B 90137B 53-123512-002 53-123542-002 53-123627-002 53-123-589-002 53-123-608-002 MFG. NO. DESCRIPTION B-1860-CON-A 1.28" Diameter Hole, 1/2" Hole Depth CONMET # 107164 107193 107453 107862 10001780 10001781 10001783 65161B 65167B 61528B 65547B • Threaded Inside for best positioning and retention • Stays on wheels • Zinc plated to resist corrosion • All brake drum numbers are subject to change without warning due to manufacturer changes beyond our control • Sold in sets of 6 per axle ASCOT NO. 491-01504 MFG. NO. B-1504-GA DESCRIPTION 1.25" Diameter Hole, 1/2" Hole Depth 3573X 3596X 3597X 3598X 3686X GUNITE # 3687X 3710X 3786X 3721AX 3726X CONMET # 1001783 10033071 10037815 3758X 3774X 3800X WEBB # 65548B 65554B 65710B FOR STEER AXLES ONLY

97 WHEEL SERVICE PRODUCTS LUG NUTS SCAN FOR MORE INFO! LN-01 14MM X 2' DUPLEX BULGE, 13/16" HEX Ascot No. 491-11001 Ascot Mfg. No. LN-01 Mfg. No. 27587 Box QTY. Case QTY. 20 100 LN-02 12MM X 1.50" BALL SEAT, SR12, 3/4" HEX Ascot No. 491-11002 Ascot Mfg. No. Mfg. No. Box QTY. Case QTY. LN-02 13760 20 100 LN-03 14MM X 1.50" DUPLEX ACORN, 7/8" HEX Ascot No. Ascot Mfg. No. 491-11003 Mfg. No. Box QTY. LN-09 12MM X 1.25" MED MAG W/WASHER, 13/16" HEX Ascot No. 491-11009 Ascot Mfg. No. Mfg. No. Box QTY. Case QTY. LN-09 17201-06 20 100 LN-10 12MM X 1.50" MED MAG W/ WASHER, 13/16" HEX Ascot No. Ascot Mfg. No. 491-11010 Mfg. No. Box QTY. LN-11 14MM X 1.50" MED MAG W/ WASHER, 7/8" HEX Case QTY. LN-03 13438-09 20 100 LN-04 14MM X 1.50" DUPLEX BULGE, 7/8" HEX Ascot No. 491-11004 Ascot Mfg. No. Mfg. No. LN-04 13439 Box QTY. Case QTY. 20 100 LN-05 9/16"-18 DUPLEX BULGE ACORN, 7/8" HEX Ascot No. Ascot Mfg. No. 491-11005 Mfg. No. Box QTY. Case QTY. LN-05 13438-10 20 100 LN-06 1/2"-20 BULGE ACORN 2PC, 13/16" HEX Ascot No. Ascot Mfg. No. 491-11006 Ascot No. 491-11011 Ascot Mfg. No. LN-11 Mfg. No. 17244 LN-12 12MM X 1.50" EXTRA THREAD CONICAL, 3/4" HEX Mfg. No. Ascot No. 491-11012 Ascot Mfg. No. LN-12 17430 LN-13 1/2"-20 BULGE ACORN, 3/4" HEX Ascot No. Ascot Mfg. No. 491-11013 Box QTY. Case QTY. 20 100 Case QTY. LN-10 17201-07 20 100 Box QTY. Case QTY. 20 100 Mfg. No. Box QTY. Case QTY. LN-13 15735-04 20 100 LN-14 12MM X 1.50" BULGE ACORN, 3/4" HEX Mfg. No. Box QTY. Case QTY. LN-06 15900-04 20 100 LN-07 12MM X 1.25" BULGE ACORN 2PC, 13/16" HEX Ascot No. 491-11007 Ascot Mfg. No. Mfg. No. Box QTY. Case QTY. LN-07 15900-06 20 100 LN-08 12MM X 1.50" BULGE ACORN 2PC, 13/16" HEX Ascot No. 491-11008 Ascot Mfg. No. Mfg. No. Box QTY. Case QTY. LN-08 15900-07 20 100 Ascot No. 491-11014 Ascot Mfg. No. Mfg. No. LN-14 13968 LN-15 12MM X 1.50" BULGE ACORN, 3/4" HEX Ascot No. 491-11015 Ascot Mfg. No. Mfg. No. Box QTY. Case QTY. LN-15 15735-07 20 100 LN-16 12MM X 1.25" BULGE ACORN, 3/4" HEX Ascot No. 491-11016 Ascot Mfg. No. LN-16 Mfg. No. 13735 Box QTY. Case QTY. 20 100 Box QTY. Case QTY. 20 100

WHEEL SERVICE PRODUCTS LUG NUTS LN-17 12MM X 1.25" CONE LUG BOLT, 19MM HEX Ascot No. 491-11017 Ascot Mfg. No. LN-17 Mfg. No. 93928 LN-18 14MM X 1.50", BULGE ACORN 13/16" HEX Ascot No. Ascot Mfg. No. 491-11018 Mfg. No. LN-18 13503 Box QTY. Case QTY. 20 100 12MM X 1.50" SPLINE 6-SIDED LUG NUT - BLACK Ascot No. 491-11026 Ascot Mfg. No. Mfg. No. Box QTY. Case QTY. LN-26 49033BKC-2PC-07 20 100 12MM X 1.50" SPLINE 6-SIDED 2-PC. LUG NUT Box QTY. Case QTY. 20 100 Ascot No. 491-11027 Ascot Mfg. No. Mfg. No. Box QTY. Case QTY. LN-27 49033-2PC-07 20 100 98 14MM X 1.50" SHORT TRUCK 7-SPLINE LUG NUT Ascot No. Ascot Mfg. No. 491-11020 Mfg. No. 12MM X 1.50" SPLINE 6-SIDED LUG NUT Ascot No. Ascot Mfg. No. 491-11021 Box QTY. Case QTY. 12MM X 1.50" OPEN END BULGE ACORN LUG NUT - 3/4" HEX - ZINC Mfg. No. Ascot No. LN-20 49334-09 20 100 491-11028 Ascot Mfg. No. Box QTY. Case QTY. LN-28 11300-07 20 100 Mfg. No. Box QTY. Case QTY. LN-21 49034-07 20 100 12MM X 1.25" SPLINE 6-SIDED LUG NUT Ascot No. Ascot Mfg. No. 491-11022 14MM X 1.50" OPEN END BULGE ACORN LUG NUT - 3/4" HEX - ZINC Mfg. No. Ascot No. 491-11029 Ascot Mfg. No. Box QTY. Case QTY. LN-29 11300-09 20 100 Mfg. No. Box QTY. Case QTY. LN-22 49034-06 20 100 1/2"-20 OPEN END BULGE ACORN LUG NUT - 3/4" HEX - ZINC Mfg. No. Ascot No. 491-11030 1/2"-20 SPLINE 6-SIDED LUG NUT - BLACK Ascot No. 491-11023 Ascot Mfg. No. Mfg. No. Box QTY. Case QTY. LN-23 49034BKC-04 20 100 Ascot Mfg. No. Box QTY. Case QTY. LN-30 11300-04 20 100 14MM X 1.50" BLACK FORD HEAVY DUTY TRUCK LUG NUT Ascot No. 491-11031 Ascot Mfg. No. Mfg. No. Box QTY. Case QTY. LN-31 11353BK-09 20 100 14MM X 1.50" BULGE ACORN 2 PC. LUG NUT - 3/4" HEX - BLACK Mfg. No. Ascot No. 491-11024 Ascot Mfg. No. 6-SPLINE CAR ADAPTER - 17MM X 19MM DRIVE Box QTY. Case QTY. LN-24 15735BKC-09 20 100 12MM X 1.50" BULGE ACORN 2 PC. LUG NUT - 3/4" HEX - BLACK Mfg. No. Ascot No. 491-11025 Ascot Mfg. No. Ascot No. 491-11032 Ascot Mfg. No. SA-01 Mfg. No. Box QTY. Case QTY. K569BKE 20 100 7-SPLINE TRUCK ADAPTER - 7/8" & 13/16" DRIVE Box QTY. Case QTY. LN-25 15735BKC-07 20 100 Ascot No. 491-11033 Ascot Mfg. No. SA-02 Mfg. No. Box QTY. Case QTY. K569LBKE 20 100

99 WHEEL SERVICE PRODUCTS LUG NUTS 6-SPLINE CAR ADAPTER, 19MM X 21MM DRIVE Ascot No. 491-11034 Ascot Mfg. No. SA-03 Mfg. No. Box QTY. Case QTY. K569BKE 20 100 12MM X 1.50" BULGE ACORN, 3/4" HEX Ascot No. 491-11039 Ascot Mfg. No. LN-39 Mfg. No. 13735 Box QTY. Case QTY. 20 100 12MM X 1.25" ACORN LUG NUT, SELECT SUBARUS, 3/4" HEX Mfg. No. Ascot No. 491-11035 Ascot Mfg. No. LN-35 12409 Box QTY. Case QTY. 14MM X 1.50” SPLINE 7-SIDED 2PC. LUG NUT - SHORT Ascot No. Ascot Mfg. No. 20 100 491-11040 Mfg. No. Box QTY. Case QTY. LN-40 49334-1-09 20 100 12MM X 1.25" ACORN SEAT LUG BOLT - 17MM HEX Ascot No. Ascot Mfg. No. 491-11036 Mfg. No. Box QTY. Case QTY. 14MM X 1.50” SPLINE 7-SIDED 2PC. LUG NUT - LONG Ascot No. LN-36 USDK93724 20 100 491-11041 14MM X 1.50” WHEEL NUT FLANGED, SELECT FORDS, 13/16” HEX Mfg. No. Ascot No. 491-11037 Ascot Mfg. No. Box QTY. Ascot Mfg. No. Mfg. No. Box QTY. Case QTY. LN-41 491351-09 20 100 Case QTY. LN-37 14008 20 100 14MM X 1.50” SPLINE 7-SIDED 2PC. LUG NUT - LONG/BLACK Mfg. No. Ascot No. 491-11042 12MM X 1.50" LONG MAG, SELECT TOYOTAS, 13/16" HEX Mfg. No. Ascot No. 491-11038 Ascot Mfg. No. LN-38 17207 Ascot Mfg. No. Box QTY. Case QTY. LN-42 49351BK-09 20 100 Box QTY. Case QTY. Ascot Storage 20 100 Options Available! *SEE PAGE 456 FOR DETAILS 18-DRAWER METAL STORAGE CABINET • Complete set of lug nut labels included! • Cabinet size: 33-3/4" (W) x 11-3/4" (D) x 10-3/4" (H) • DRAWER SIZE: 4-7/8" (W) x 11-1/4" (D) x 2-3/4" (H) • Modular drawer design for efficiency and organization • Heavy-duty, welded steel construction provides strength and stability • Drawers feature stoppers to prevent accidental pulling or spilling • Full-width handles and easy glide runners • Shipped fully assembled and ready to use • Weight: 45 lbs. ASCOT NO. MFG. NO. 719-00018 18D DESCRIPTION 18-Drawer Metal Storage Cabinet

WHEEL SERVICE PRODUCTS LUG NUT REMOVAL PRODUCTS 1/2" DR. 4-PIECE FLANK BITE DAMAGED NUT REMOVER SOCKET SET • INCLUDES THE FOLLOWING SIZES: 17mm, 19mm, 21mm, 22mm 1/2" DRIVE DUAL-SIDED SOCKET LUG NUT REMOVER TOOL • Dual flip 1/2" drive impact design • Removes missing and distorted lug nuts with chrome caps 492-01240 ASCOT NO. MFG. NO. DESCRIPTION 492-01240 492-01250 492-01260 163-22219 ASCOT NO. MFG. NO. 163-22219 DESCRIPTION 122019K2 1/2" DR 4-Piece Flank Bite Damaged Nut Remover Socket Set TWIST SOCKET REMOVAL KIT • This kit easily removes damaged nuts, studs, pipe nipples and bolts • Comes mounted on a 1/2" rail, individually packaged 492-04400 5-PIECE 1/2" DRIVE TWIST SOCKET SET • Designed to easily remove damaged, rounded nuts • Use with 1/2" drive impact wrench or breaker bar • CR-MO steel for long life • Heavy duty blow molded case • INCLUDES: 17mm, 19mm, 21mm & 22mm twist sockets plus a 50mm extractor punch ASCOT NO. MFG. NO. DESCRIPTION 492-04400 LT 4400 1/2" Drive 6-Piece Twist Socket Removal Kit 5-PIECE LOCKING LUG NUT TWIST SOCKET REMOVAL KIT • Removes locked or damaged lug nuts without a key • Now in 4 sizes for maximum coverage • Lug nuts are usually reusable • Works with a breaker bar or other related tool • Comes mounted on a 1/2" rail, individually packaged ASCOT NO. MFG. NO. DESCRIPTION 492-04240 492-00502 ASCOT NO. MFG. NO. 492-00502 TSS5 DESCRIPTION 5-Piece 1/2" Drive Twist Socket Set ASCOT NO. MFG. NO. DESCRIPTION REPLACEMENT SOCKETS FOR TSS5 SET 17mm Replacement Twist Socket 492-05021 492-05022 492-05023 492-05024 492-05025 TSS5-1 TSS5-2 19mm Replacement Twist Socket 21mm Replacement Twist Socket TSS5-3 TSS5-4 22mm Replacement Twist Socket Twist Socket Set Extractor Punch TSS5-5 ASCOT NO. MFG. NO. DESCRIPTION 492-04200 492-04300 4200A 4300 Dual Sided Twist Socket Lug Nut Remover 3-Piece Twist Socket Lug Nut Removal System 3-PIECE TWIST SOCKET LUG NUT REMOVAL SYSTEM • Removal of damaged 3/4" and 19mm, 13/16" and 21mm lug nuts • Two dual-sided twist sockets have a fluted design which gives the sockets a tight grip to remove the most difficult locking and damaged lug nuts from the socket • Works with 1/2" impact gun or breaker bar for service calls • Includes an extractor punch 492-04300 492-04200 492-04240 LT 4240 5-Piece Locking Lug Nut Twist Socket Removal Kit 492-01250 492-01260 LT 1240 Chrysler/Dodge 21mm chrome cap lug nuts (21/21.5mm) LT 1250 GM & Chrysler 19mm chrome caps (18.5/19.5mm) LT 1260 Chrysler/Dodge 22mm chrome cap lug nuts (22/22.5mm) 100

101 WHEEL SERVICE PRODUCTS LUG NUT REMOVAL PRODUCTS SAVE-A-STUD RETHREAD KIT - AUTOMOTIVE NUT BUDDY LUG NUT REMOVER • Loosens the most stubborn wheel nuts • Application: Use on commercial or agricultural wheels • Gear ratio: 58:1 • Rated output torque: 2950 ft/lbs. • Two sockets included: 1-1/2" (38mm) and 1-5/16" (33mm) • Damaged studs can be renewed in minutes without removing the caliper, rotor, or stud • A 30-second solution to an hour-long job • Solves the problem 493-30100 404-67300 ASCOT NO. MFG. NO. 404-67300 67300 DESCRIPTION Nut Buddy Lug Nut Remover ASCOT NO. MFG. NO. 493-30100 30100 DESCRIPTION Save-A-Stud Rethread Kit - INCLUDES: 7/16", 1/2", 9/16", 5/8", 12mm - 1.25", 12mm - 1.5", 14mm - 1.5" 9-PIECE SAVE RETHREAD KIT SAV-A-STUD RETHREAD KIT - TRUCK • Repairs damaged wheel s • 9-Piece Rethread Kit • F passenger, light truck, and hea duty • Guaranteed f • Individual dies av • Repairs wheel studs, spindles and standard threaded s Lifetime warran 493-31210 KIT CONTENTS SAE: 7/16"-20, 1/2"-20, 9/16"-18, 5/8"-18 METRIC: 12mm-1.25, 12mm-1.50, 12mm-1.75, 14mm-1.50, 14mm-2.00 ASCOT NO. MFG. NO. 493-31210 31210 DESCRIPTION 9-Piece Save-A-Stud Rethread Kit ASCOT NO. MFG. NO. 493-30120 30120 DESCRIPTION Save-A-Stud Plus Rethread Kit (9 pcs.) - INCLUDES: 9/16" - 18, 5/8" - 18, 14mm - 1.5, 14mm - 2.0, 7/16" x 20, 1/2" - 20 Right, 12mm - 1.25, 12mm - 1.5, 12mm - 1.75 493-30125 30125 Save-A-Stud Plus HD (3 pcs.) - INCLUDES: 3/4" - 16" Right, 3/4" - 16" Left, 22 - 1.5mm

WHEEL SERVICE PRODUCTS LUG NUT REMOVAL PRODUCTS 12 PC. TAP AND DIE SET FOR WHEEL STUDS AND WHEEL NUTS • Re-cutting and cleaning the threads is very simple • The set includes all essential tools and adapters and comes in a blow mold case • 4PC. DIE: m12x1.25, m12x1.5, m14x1.25, m14x1.5 • 4PC. TAP: m12x1.25, m12x1.5, m14x1.25 m14x1.5 • 1PC. tap holder (M12-M18) • 1PC. die socket (Ø38 HEX, Ø36.5 ROUND ) • 1PC. screw pitch gauge •1PC. 1/2" sr. 25mm with C-ring socket ASCOT NO. MFG. NO. DESCRIPTION 319-00012 319-12125 319-12150 319-14125 319-14150 319-22125 319-22150 319-24125 319-24150 TD12 - - - - - - - - 12-Pc Tap And Die Set For Wheel Studs and Wheel Nuts Replacement M12 x 1.25 Die Replacement M12 x 1.50 Die Replacement M14 x 1.25 Die Replacement M14 x 1.50 Die Replacement M12 x 1.25 Tap Replacement M12 x 1.50 Tap Replacement M14 x 1.25 Tap Replacement M14 x 1.50 Tap 102 TESLA WHEEL BOLT LOCK SOCKET SET THREAD RESET KIT • Applicable for installing and removing locks of Tesla series • Contents: #76, #77, #78, #79, #80, #81, #82, #83, #84, #85 • This tool enables you to permit servicing of customer vehicles, even customer has lost the key • Hand Tool use only, don’t use impact wrench and air tool • Made in Taiwan • Quick and cost-saving rethreading of damaged threads • Thread is remoulded to its original geometry • No material removal • Strength of the wheel bolts/screws is retained • Compact design • Including pipe socket wrench SW 41 • Thread size covers approx. 80% • For vehicles with wheel studs Thread Reset Kit ASCOT NO. MFG. NO. 402-02312 1020312 Tesla Wheel Bolt Lock Socket Set 402-02312 ASCOT NO. MFG. NO. 493-73602 DESCRIPTION KL-0173-602 Thread Reset Kit DESCRIPTION

103 WHEEL SERVICE PRODUCTS LUG NUT REMOVAL PRODUCTS 16-PIECE LOCKING LUG KEY SET • Heat treated chrome vanadium steel construction • Thin w prevent damage to wheels • Double hex head design fits mos wrenches • Easily removes locking lug nuts • Extra long lug k your wrench away from the wheel preventing nicks and scratches Packed in blow molded case with color sleeve • Made in Taiw KIT CONTENTS HEX: 11mm, 12mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm SOCKETS INCLUDED: (2) 5/8", 41/64", 45/64", (2) 15/32", 19/32", (2) 11/16", 3/4", 7/16", 5/8", (2) 1/2", 13/16", 9/16" ASCOT NO. MFG. NO. DESCRIPTION 402-01283 402-28301 402-28302 402-28303 402-28305 402-28306 402-28307 402-28308 402-28309 402-28310 402-28311 402-28312 402-28313 402-28314 402-28315 402-28316 1283-2 1283-3 1283-5 1283-6 1283-7 1283-8 1283-9 1283-10 1283-11 1283-12 1283-13 1283-14 1283-15 1283-16 402-01283 CHT1283 16-Piece Locking Lug Key Set 1283-1 7-Spline Small Diameter Lug Nut Socket - 3/4" Inner Diameter 7-Spline Small Diameter Lug Nut Socket - 11/16" Inner Diameter 7-Spline Small Diameter Lug Nut Socket - 5/8" Inner Diameter 10-Point Star Lug Nut Key - 1/2" Tip Outer Diameter 8-Point Star Lug Nut Key - 5/8" Tip Outer Diameter 8-Point Star Lug Nut Key - 7/16" Tip Outer Diameter 8-Point Star Lug Nut Key - 1/2" Tip Outer Diameter 6-Spline Small Diameter Lug Nut Socket - 45/64" Inner Diameter 6-Spline Small Diameter Lug Nut Socket - 41/64" Inner Diameter High Tech Hex Lug Nut Key - 15mm Hex Size High Tech Hex Lug Nut Key - 9/16" Hex Size High Tech Hex Lug Nut Key - 12mm Hex Size High Tech Fluted Hex Lug Nut Key - 12mm Hex Size 12-Spline Small Diameter Lug Nut Socket - 13/16" Inner Diameter 12-Spline Small Diameter Lug Nut Socket - 11/16" Inner Diameter 1283-11 1283-12 1283-13 1283-14 1283-15 1283-16 8-Point Star Lug, 5/8” Outer Diameter 8-Point Star Lug, 7/16” Outer Diameter 9-Point Star Lug, 1/2” Outer Diameter 1283-6 1283-7 1283-9 1283-8 1283-10 1283-1 1283-2 1283-3 1283-4 1283-5 APPLICATION GUIDE 7-Spline Small Diameter Socket, 3/4” Inner Diameter 7-Spline Small Diameter Socket, 11/16” Inner Diameter 7-Spline Small Diameter Socket, 5/8” Inner Diameter 5-Spline Small Diameter Socket, 5/8” Inner Diameter 10-Point Star Lug, 1/2” Outer Diameter 6-Spline Small Diameter Socket, 6-Spline Small Diameter Socket, 45/64” Inner Diameter 41/64” Inner Diameter High Tech Hex Lug, 15mm Outer Dimension High Tech Hex Lug, 9/16” Outer Dimension High Tech Hex Lug, 12mm Outer Dimension High Tech Fluted Hex Lug, 12-Spline Small Diameter Socket, 12mm Outer Dimension 13/16” Inner Diameter 12-Spline Small Diameter Socket, 11/16” Inner Diameter

WHEEL SERVICE PRODUCTS LUG NUT REMOVAL PRODUCTS 1/2" DRIVE 9-PIECE WHEEL LOCK REMOVAL KIT • APPLICATION: For Ford, Chrysler & GM Vehicles as well as standard and oversized OEM and aftermarket wheel locks for other domestic and imported cars and light trucks 1/2" DRIVE 13-PIECE WHEEL LOCK REMOVAL KIT • APPLICATION: For Ford, Chrysler & GM Vehicles as well as standard and oversized OEM and aftermarket wheel locks for other domestic and imported cars and light trucks HEAVY DUTY HEAVY DUTY 104 401-02840 ASCOT NO. 401-02840 401-28401 401-28402 401-28403 401-28404 401-28405 401-28406 401-28407 401-28408 401-28409 MFG. NO. DESCRIPTION KIT CONTENTS 2840 28401 28402 28403 28404 28405 28406 28407 28408 28409 9-Piece Wheel Lock Remover Kit Individual Wheel Lock Remover for Ford and Chrysler Hubcap Locks Individual Wheel Lock Remover for Ford Wheel Locks and 18mm GM Lug Nuts Individual Wheel Lock Remover for Corvette, GM, N & F Body Wheel Locks Individual Wheel Lock Remover for Oversize McGard Wheel Locks Individual Wheel Lock Remover for McGard Wheel Locks & GM Hubcap Locks Individual Wheel Lock Remover Extractor Punch Individual Wheel Lock Remover for Chrysler Hubcap Locks Individual Wheel Lock Remover for GM Hubcap Locks Individual Wheel Lock Remover for GM Spline Hubcap Locks PARTS INCLUDED Ford, Chrysler & Large GM Lock Remover GM Spline Hublock Adapter Standard GM Hubcap Locks Stripped 18mm/GM Wheel Cover Adapter Corvette-GM N& F Body Adapter Standard Ford & GM/ Large Wheel Adapter KIT CONTENTS PARTS INCLUDED Oversized McGuard Wheel Lock Adapter Punch Late Model Chrysler Lock Adapter 1/2" Dr. 18mm Nut/Corvette GM Lock Remover 3/4", 19mm, OS Wheel Lock Remover 7/8" OS Wheel Lock Remover 1/2" x 3" Impact Extension 401-02841 ASCOT NO. MFG. NO. 401-02840 2840 DESCRIPTION ASCOT NO. MFG. NO. 401-02841 Deluxe Hubcap Wheel Lock Removal System 12840-13 1/2" Drive 13-Piece Wheel Lock Removal Kit DESCRIPTION

105 WHEEL SERVICE PRODUCTS LUG NUT REMOVAL PRODUCTS 4-PIECE HEAVY DUTY WHEEL STUD REMOVER SET 4-PIECE LUG NUT REMOVER IMPACT SOCKET SET • APPLICATION: Use for removing wheel locks or damaged lug nuts • Patented, internal tapered reverse threads lock onto damaged nut and easily pulls off using impact wrench • Convenient compact storage case • INCLUDES THE FOLLOWING 1/2" DRIVE SIZES: 3/4", 13/16", 1", 1-1/8" • MADE IN USA MADE IN THE USA 492-30649 REMOVES STUDS & BUDD NUTS • APPLICATION: Removes damaged wheel studs and inner Budd nuts • Patented, internal tapered reverse threads lock onto damaged stud or nut and easily pulls off using impact wrench • Wheel Stud Removers are 3/4" hex drive • Budd Nut Removers are 1-1/8" hex drive • Convenient compact storage case, 6.5" x 4.5" x 2.75"; 3.5 lbs • SET INCLUDES THE FOLLOWING SIZES: 5/8", 3/4", 1-1/8" Budd wheel inner nut left hand thread, 1-1/8" Budd wheel inner nut right hand thread • MADE IN USA MADE IN THE USA R ASCOT NO. MFG. NO. DESCRIPTION 492-30649 30649 4-Piece Heavy Duty Wheel Stud Remover Set INCLUDES: 5/8", 3/4", 1-1/8" Budd left hand, 1-1/8" Budd right hand THIRTEEN PIECE WHEEL COVER & WHEEL-LOCK REMOVAL KIT 492-30254 REMOVES WHEEL LOCKS & LUG NUTS ASCOT NO. MFG. NO. 492-30254 30254 DESCRIPTION 4-Piece Lug Nut Remover Impact Socket Set INCLUDES: 3/4", 13/16", 1", 1-1/8" (1/2" Drive)

WHEEL SERVICE PRODUCTS LUG NUT REMOVAL PRODUCTS COMMERCIAL TRUCK CHROME LUG NUT PULLER • Thick carbon steel material provides strength for heavy duty applications • Round shape handle provides comfort and ease of operation • Suitable for all heavy duty truck lug nut applications • Two hole design can be switched to expand range and size of application • Coated jaws protect painted, aluminum or chrome plated lug nuts from damage CHROME LUG NUT COVER REMOVER • Coated to prevent scratching or damage to chrome, coated or painted lug covers • Cushioned grip to prevent slippage 106 COATED TO PREVENT DAMAGE TWO HOLE DESIGN COATED TO PREVENT DAMAGE CUSHIONED GRIP ASCOT NO. MFG. NO. 402-03116 DESCRIPTION 202603-HD Commercial Truck Chr Lug Nut Puller HEAVY DUTY PROFESSIONAL CHROME NUT PULLER • Coated to prevent scratching or damage to chrome, coated or painted lug covers • Cushioned grip to prevent slippage • NO ADJUSTMENT REQUIRED: Fits all 33mm & 1½" covers • Similar to Ken Tool 30606 402-30606 CUSHIONED GRIP HEAVY DUTY COATED TO PREVENT DAMAGE ASCOT NO. MFG. NO. DESCRIPTION 402-30606 30606 ASCOT NO. MFG. NO. 402-03016 202603 DESCRIPTION Heavy Duty Professional Chr Nut Puller with Cushion Handle Chrome Lug Nut Cover Remover

107 WHEEL SERVICE PRODUCTS WHEEL ATTACHING HARDWARE 33MM SKIRTED NUT • Replaces standard M22 flange nuts on 11.25" hub-piloted wheels • 22mm x 1.5 thread • Partially penetrates the stud hole and prevents clocking and vibration • QUANTITY: 100 per case Extended threading allowing Skirt Nut to go down into Hub-Piloted Disc Wheel an extra 3/16" (5mm) into stud hole STOPS CLOCKING & VIBRATION Skirt Nut Video ELIMINATES WASTED FUEL 491-02301 491-02906 26mm stud hole 22mm stud 491-11133 There is a fairly large tolerance between the diameter of each stud hole and the diameter of the stud itself. Ascot No. Mfg. No. 491-11133 Description SN33B35.1 33mm Skirted Nut Ascot No. 491-02301 Mfg. No. GL-2301 Description Haltec 33mm 2-Piece Flange Nut • Inner Thread M22-1.5 • For Uni-Mount 10Hole Systems • Made in Brazil 491-02906 491-02919 GL-2906 Haltec 6mm Sleeve Nut: Steel Steers GL-2919 Haltec 19mm Sleeve Nut: • Aluminum Steers • Steel/Steel Drives • Steel Outer/Aluminum Inner Drives 491-02928 GL-2928 Haltec 28mm Sleeve Nut: • HD Aluminum • Super Single • Wide Base • Aluminum Outer/ Steel Inner Drives 491-02939 491-23010 Ascot No. Mfg. No. 491-23010 Description N33A06 33MM Hex 2-PC. Flange Nut – 22MM X 1.50 Thread- Made in China 491-02939 GL-2939 Haltec 39mm Sleeve Nut: Dual Aluminum Drive Axle 491-02928 491-02919

WHEEL SERVICE PRODUCTS WHEEL ATTACHING HARDWARE GRADE 8 DISC WHEEL HARDWARE-INNER CAP NUTS Similar To: Ascot No. for Sirco Sirco No. Ascot No. for GLP GLP No. 491-00708 708AR 491-01001 (RH) GL-1001 Budd 10708 491-00709 709AL 491-01002 (LH) GL-1002 Budd 10709 491-00896 896R 491-01896 896L 491-00897 491-01897 897R 897L 491-00978 988R 491-01978 988L 491-00306 306R 491-01306 306L 491-01003 (RH) GL-1003 Budd 35336 491-01004 (LH) GL-1004 Budd 35337 491-01005 (RH) GL-1005 Budd 22621 491-01006 (LH) GL-1006 Budd 22622 491-01011 (RH) GL-1011 Alcoa 5988R 491-01012 (LH) GL-1012 Alcoa 5988L METRIC 491-01009 (RH) GL-1009 Hino 900423101 491-01010 (LH) GL-1010 Hino 900424101 Isuzu 1-42335005 - Zinc Isuzu 1-42336005 - Zinc 491-01011 Euclid 7895R Euclid 7895L Euclid 7896R Euclid 7896L Euclid 7897R Euclid 7897L Euclid 5988R Euclid 5988L Steel/ Steel Steel/ Steel Steel/ Alum Steel/ Alum Steel/ Alum Steel/ Alum Alum/ Alum Alum/ Alum 491-01003 491-01001 108 GRADE 8 DISC WHEEL HARDWARE-OUTER CAP NUTS Similar To: Ascot No. for Sirco Sirco No. 491-00891 891AR 491-00892 892AL 491-00888 888R 491-00889 889L 491-00995 995R 491-01995 995L N/A N/A N/A N/A Ascot No. for Haltec Haltec No. 491-02001 (RH) GL-2001 Budd 37891 Euclid 5997R 491-02002 (LH) GL-2002 Budd 37892 Euclid 5997L 491-02101 (RH) GL-2101 Budd 37888 Euclid 5652R N/A N/A N/A N/A 491-00304 304R 491-01304 304L 491-00033 333B 491-00881 881M 491-02102 (LH) GL-2102 Budd 37889 Euclid 5652L 491-02103 (RH) GL-2103 Alcoa 5995R Euclid 5995R 491-02104 (LH) GL-2104 Alcoa 5995L Euclid 5995L GL-2203 Budd 95188 Euclid 9022R GL-2204 Budd 95189 Euclid 9022L GL-2202 Budd 81269 Euclid 5734 GL-2303 Alca 389928 Ford E4tZ-1012A 491-02203 491-02204 491-02202 491-02303 METRIC 491-02009 491-02010 491-02301 491-02302 GL-2009 Hino 900421112 GL-2010 Hino 900422104 Isuzu 1-42333023 Isuzu 1-42334023 GL-2301 Budd 106333 Euclid 6000A GL-2302 MW 88881 Euclid 5991 491-02203 491-02001

109 WHEEL SERVICE PRODUCTS WHEEL ATTACHING HARDWARE MUD FLAP BOLT KIT • All the hardware needed to attach mud flaps to trucks or trailers • INCLUDES: (4) 3/8"-16 x 1-1/4" bolts, (4) 3/8" Nuts, (8) 3/8" flat washers & (4) 3/8" lock washers ASCOT NO. MFG. NO. 491-00038 MFBK DESCRIPTION Mud Flap Bolt Kit ASCOT NO. MFG. NO. 491-04009 491-04012 491-04013 491-04020 491-04021 491-09013 491-09014 DESCRIPTION GL-4009 GL-4012 GL-4013 GL-4020 GL-4021 GL-4913 GL-4974 Standard 6-Hole Hubcap 6-Hole Gasket for Above Universal Gasket - 5 or 6 Hole Replaceable Window Kit Rubber Plug for Bolt-On Cap Fruehauf/Propar Cap O-Ring for Screw-On Cap OIL SEAL HUBCAPS AND GASKETS 491-04009 CONE WHEEL NUTS 491-00038 491-00014 SPOKE WHEEL HARDWARE 491-03002 491-03005 ASCOT NO. FOR SIRCO 491-00149 491-00716 SIRCO NO. ASCOT NO. FOR HALTEC HALTEC NO. THREAD RIM CLAMP NUTS 149 491-03004 GL-3004 5/8-11 Dayton 5149 716 491-03005 GL-3005 3/4-10 Dayton 5716 RIM STUDS (GRADE 8) 491-00654 654 491-03001 GL-3001 5/8-11x23/4 N/A Dayton 6654 N/A 491-03002 GL-3002 3/4-10x3 Dayton 5715 Euclid 4958 Euclid 4956-A Leland W-5 Leland W-6 BRAKE DRUM MOUNTING HARDWARE 491-06014 LOCKING BACK NUTS 491-06023 ASCOT NO. HALTEC NO. 491-06023 491-02431 491-02445 SIZE GL-6023 5/8"-18 GL-2431 7/8"-14 GL-2445 1"-14 SIMILAR TO: MW 85643 Budd 41073-8 Budd 44672-9 — Euclid 1835 Euclid 1828 ASCOT NO. MFG. NO. 491-06012 491-06014 491-06020 491-06021 491-06025 491-06026 491-06023 491-06024 SIZE GL-6012 GL-6014 GL-6020 GL-6021 GL-6025 GL-6026 DESCRIPTION 5/8-18 x 2" 5/8" Brake Bolt/Washer/Assembly 3/4-16 x 2" 3/4" Brake Bolt/Washer/Assembly 5/8-18 x 2" 3/4-16 x 2" 5/8" 3/4" Brake Bolt Only Brake Bolt Only Flat Washer Flat Washer GL-6023 5/8"-18" GL-6024 3/4"-16" Lock Nut Only Lock Nut Only SIMILAR TO: Euclid 4962 Euclid 4963 Leland W-7 Leland W-8 ASCOT NO. MFG. NO. 491-00014 491-00016 491-00027 491-00062 491-00066 491-00065 491-00064 491-00052 491-00055 491-00056 SIZE GL-0014 GL-0016 GL-0027 GL-0062 GL-0066 GL-0065 GL-0052 GL-0055 GL-0056 7/16"-20 (3/4" Hex, 9/16" High) 1/2"-20 (13/16" Hex, 5/8" High) 1/2"-20 (3/4" Hex, 9/16" High) 12mm-1.5 (19mm Hex, 14mm High) 12mm-1.5 (21mm Hex, 16mm High) 12mm-1.25 (21m Hex, 16mm High) GL-0064 12mm-1.25 (19mm Hex, 16mm High) 9/16"-18 (7/8" Hex, 3/4" High) DESCRIPTION G.M. Ford Chrysler G.M. Toyota Nissan Nissan G.M. R.H. 5/8"-18 (1" Hex, 21/32" High) Budd 67147 L.H. 5/8"-18 (1" Hex, 21/32" High) Budd 67147

WHEEL SERVICE PRODUCTS WHEEL ATTACHING HARDWARE RIM CLAMPS 491-03097 Ascot No. for Sirco Sirco No. Ascot No. for GLP 491-00399 399 491-03083 491-00729 729 491-03087 491-00123 491-00235 235 491-03097 491-03113 GLP No. A Dim. GL-3083 N/A N/A GL-3087 N/A N/A N/A N/A Dayton 8399 Euclid 5927 Euclid 5838 Dayton 09-729514 123 491-03096 GL-3096 1-1/8" 2-7/8" 2-11/32", 3/4" Stud Dayton 6123 Euclid 5571A GL-3097 1-3/4" 2-7/8" 2-11/32", 3/4" Stud Dayton 6235 Euclid 5572A 491-00993 993 491-03098 GL-3098 1-1/2" 2-7/8" 2-11/32", 3/4" Stud Dayton 6993 Euclid 5040A N/A N/A N/A N/A 491-03099 GL-3099 2-1/8" 2-7/8" 2-11/32", 3/4" Stud Dayton 705317 Euclid 5786 N/A 491-03101 N/A 491-03103 GL-3101 491-00053 053 491-03104 257 491-03113 491-00257 491-00238 238 491-03271 491-06115 N/A GL-3104 2" GL-3113 GL-3271 491-00233 233 491-03279 GL-3279 N/A 491-06115 GL-6115 Mack 15QJ-17P1 1-7/8" 2-7/8 2-11/32", 3/4" Stud Dayton 851817 Webb 16124 GL-3103 1-1/4" 2-7/8" 2-11/32", 3/4" Stud Dayton 8708 Euclid 5784 2-7/8" 2-11/32", 3/4" Stud Dayton 870917 Euclid 5785 Euclid 5828 Mack 15QJ-223BP8 Euclid 5781 Mack 15QJ-223BP3 Euclid 5821 N/A Kelsey 79954 B Dim. C Dim. Similar To: 110 33MM PLASTIC LUG NUT COVER WRENCH STANDARD WHEEL RIM GUARD • APPLICATION: Protects aluminum, chrome and painted truck rims/wheels during stud and nut removal • Inexpensive • Tough polymer design Ascot No. Mfg. No. 402-50301 50301 Description Standard Wheel Rim Guard Ascot No. Mfg. No. 402-06002 AS-600 DISCMATE WHEEL PROTECTORS • Used to protect the wheel’s mounting surfac cosmetic damage during use • Placed between the wheel and it’s mounting surface on the vehicle and ma also be used between 2 dualed wheels for added protection • Wheel nuts should always be tightened to the correct torque following the wheel manufacturer’s specifications Ascot No. Mfg. No. Description 402-11000 61020 402-17000 61000 402-18000 61040 INSTALLATION TOOL FOR ALCOA HUB COVER SYSTEMS • 600 Application: For use with Alcoa 076185, 077185, 076188 & 077188 Hub Systems • 500 Application: For use with Alcoa 076155, and 077155 491-00600 10-Hole 285.75mm, Hub Pilot, 22mm Studs 10-Hole 11-1/4" Stud-Pilot, 1-1/8" Studs 10-Hole 335mm, 32mm Cap Nuts, 22mm Studs 491-00500 500 Ascot No. Mfg. No. Description 491-00600 600 Installation Tool for Alcoa Hub Cover Systems Installation Tool for Alcoa Hub Cover Systems Description 33MM Plastic Lug Nut Cover Wrench 402-06002 402-50301 • For use with Alcoa Hug-A-Lugs • Durable black plastic material • Will work on general lug nut cover kits • Makes it simple to install or remove your covers by giving you a firm grip and a strong lever • 33mm hex • 11” overall length

111 WHEEL SERVICE PRODUCTS TIRE & WHEEL SERVICE TOOLS RIB NUT SALVAGE TOOL KIT • INCLUDES: (1) Drift Pin, (1) Salvage Cylinder, (1) LH Thread Bolt, (1) RH Thread Bolt ASCOT NO. MFG. NO. 499-10150 DESCRIPTION X10-LS15B Rib Nut Salvage Tool Kit 499-10150 3-PIECE HEX NUT REMOVER KITS 492-15000 ASCOT NO. MFG. NO. 492-15000 492-14000 DESCRIPTION X10-NR15B 1-1/2" Hex Nut Remover Kit - 3 Piece X10-NR14B 1-1/4" Hex Nut Remover Kit - 3 Piece STUD INSTALLERS 492-10158 499-10580 499-10660 492-10134 ASCOT NO. MFG. NO. 492-10134 492-10150 492-10158 492-10159 492-10196 492-10590 DESCRIPTION X10-SI34Z For 3/4" Studs. Fits 1-1/4" Socket X10-LC15B Rib Nut Salvage Cylinder X10-SI58Z X10-SI96Z For 5/8" Studs. Fits 1-1/4" Socket X10-SI59Z For 5/8" x 18 Studs. Fits 1-1/4" Socket For 9/16" x 18 studs. Fits 1-1/4" Socket X10-SI59Z 5/8"- 18 Stud Installer STUD REMOVERS ASCOT NO. MFG. NO. 492-10340 492-10580 492-10180 492-10780 X10-SR18B WHEEL STUD INSTALLERS • Prevents damage to your lug nuts or new stud by reducing friction during stud installation • Works with hubs, rotors, axles • Two sizes available: Vehicle Wheel Stud Installer & Truck Wheel Stud Installer DESCRIPTION X10-SR34B For 3/4" Studs. Fits 1-1/4" Socket X10-SR58B For 5/8" Studs. Fits 1-1/4" Socket For 1-1/8" Studs. Fits 1-1/4" Socket X10-SR78B For 7/8" Studs. Fits 1-1/4" Socket REPLACEMENT RIB NUTS ASCOT NO. MFG. NO. 499-10180 499-10341 499-10581 499-10211 499-11171 492-10151 X10-LN18B X10-LN34B X10-LN58B X10-LN21B X10-LN17B X10-LP15Z ASCOT NO. MFG. NO. 499-10200 499-10340 DESCRIPTION 499-10200 X10-LT20B For Removing Damaged Inner Cap Nuts (1-1/8" Dia. - 13/16" Square Head) INCLUDES: (1) Drive-On Tool And (1) Rib Nut X10-LT34B For Removing Damaged 3/4" Lug Studs. INCLUDES: (1) Drive-On Tool And (1) Rib Nut X10-LT58B For Removing Damaged 5/8" Lug Studs. INCLUDES: (1) Drive-On Tool, (1) Rib Nut X10-LT66B Triple Duty Tool For Removing Damaged Budd Wheel Inner Cap Nuts, 3/4" And 5/8" Lug Studs. INCLUDES: (1) Drive-On Tool and (3) Rib Nuts ASCOT NO. MFG. NO. 499-10130 499-10171 499-10210 DESCRIPTION X10-SA13B Fits 1-1/2" Socket Wrench to Speed Up Installing Or Removing Budd Wheel Inner Cap Nuts X10-SA17B 17mm Stud Adapter X10-SA21B 21mm Stud Adapter HEAVY DUTY DRIVE-ON RIB-GRIP LUG-OFF KITS 13/16" SQUARE HEAD ADAPTER 499-10130 DESCRIPTION For Budd Wheel Inner Cap Nuts For 3/4" Lug Studs For 5/8" Lug Studs For 21mm Lug Studs For 17mm Lug Studs Drive Pin 492-02278 ASCOT NO. MFG. NO. 492-02278 492-14916 DESCRIPTION TWS-22 TWS-14 Truck Wheel Stud Installer - Fits studs up to 7/8" (22mm) Vehicle Wheel Stud Installer - Fits studs up to 9/16" (14mm) 492-14916

WHEEL SERVICE PRODUCTS TIRE & WHEEL 7-PIECE SPARE TIRE TOOL SET • Allows anyone to quickly remove difficult to reach spare tires • No more digging through the customer’s vehicle to locate the spare tire removal kit • Color-coded wall bracket allows user to quickly identify the correct removal tool • APPLICATION: Includes many trucks & SUV’s where the spare tire is located under the vehicle • Individual tools also available SERVICE TOOLS WHEEL STUD SERVICE KIT • Works on most hubs for installation and removal • All sizes of studs • Installation done by pushing on the head, eliminating the need for threaded adapters • Reduces number of adapters required • Reduces damage to studs • Increases ease of use • Remove and install 10 studs in only 10-15 minutes (compare to 20-30 minutes for more expensive competitive products) • Can be powered with an impact wrench, no hydraulic power source required • No need to remove hub from vehicle • Reduces risk of damage to hubs, studs, and bearings when using tool • Weighs only 12 lbs., assembled to remove studs and 14 lbs., assembled to install studs • Made in Taiwan Wheel Stud Service Kit Video 112 319-96090 ASCOT NO. MFG. NO. 319-96090 96090A DESCRIPTION 7-Piece Spare Tire Tool Kit ASCOT NO. MFG. NO. DESCRIPTION INDIVIDUAL SPARE TIRE TOOLS 319-96091 96091 Spare Tire Tool - Flat Head: Red APPLICATION: For Use on Late Model S10 trucks, Explorers, Blazers, Jimmys, F150s, Expeditions, Older Dakota 2-Wheel Drives and McGuard Lock Systems 319-96092 319-96093 319-96094 319-96095 319-96096 319-96097 319-96098 96092 96093 96094 96095 96096 Spare Tire Tool - Pin Head: Blue APPLICATION: For Use on Import Trucks Spare Tire Tool - Hex Head: Yellow APPLICATION: For Use on Dodge Full Size and Stake Bodies, ‘98-’01 Dodge Full-Size 4-Wheel Drive Spare Tire Tool - 12mm Square Head: Green APPLICATION: For Use on All Late Model GMs, Remaining ‘98-’03 Dodge Trucks Spare Tire Tool - Std. Square Head: Orange APPLICATION: For Use on Older Ford Trucks Spare Tire Tool - Slotted Square Head: Black APPLICATION: For Use on Dodge Durango, Inside the Hatch 96097 Wall Mount Bracket for Spare Tire Tool Set Color-coded to allow user to quickly identify the correct removal tool 96098 Spare Tire Tool - 3/8" Square Head: Purple APPLICATION: For Use on New Ford Models ASCOT NO. MFG. NO. 493-91420 DESCRIPTION NS-9142 Wheel Stud Service Kit 493-91420

113 WHEEL SERVICE PRODUCTS TIRE & WHEEL SERVICE TOOLS The Counteract Wheel Centering Sleeves in use. COUNTERACT WHEEL CENTERING SLEEVES • Patent pending wheel centering system that works in conjunction with your OEM style two-piece flange nuts • Unique self-sizing & non-corrosive design re-aligns the wheel to the TRUE CENTER of the hub bearing • Increased fuel mileage, increased tire life, decreased tire vibration, stops irregular tire wear, decreased tire maintenance, reduced tire cupping, reduced “wheel off” conditions • Made from a high temperature resistant polyamide COUNTERACT INSTALLATION/REMOVAL TOOL • Specifically designed to install and remove Counteract Centering Sleeves 491-02111 ASCOT NO. MFG. NO. DESCRIPTION 491-02111 WCS-IT Counteract Installation/Removal Tool WHEEL STUD ALIGNMENT SET • 5 SIZES: M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1.25, M14 x 1.5 • Each stud is marked with the thread size • Color coded for easy identification • Knurled edges provide a secure grip • Comes in a sturdy blow molded case 491-02622 491-02620 491-02100 ASCOT NO. MFG. NO. 491-02622 WCS-B 491-02620 WCS-B20 491-02100 WCS-C 491-02101 WCS-D DESCRIPTION Centering Sleeves Clamshell - 22mm (Pack of 6) Centering Sleeves Clamshell - 20mm (Pack of 6) Centering Sleeves - 22mm (Bucket of 100) Centering Sleeves - 22mm (Bucket of 1,000) 491-19010 ASCOT NO. MFG. NO. DESCRIPTION 491-19010 OT-190F 10-Piece Wheel Stud Alignment Set

WHEEL SERVICE PRODUCTS TIRE & WHEEL SERVICE TOOLS UNI-MOUNT M22 THREAD PITCH GAUGE • APPLICATION: Designed for M22 x 1.5 Uni-Mount Studs • If the thread teeth do not fully engage the stud, the stud should be removed from service • Simple to use 401-69260 SIMPLE TO USE ASCOT NO. MFG. NO. DESCRIPTION 401-69260 69260 Uni-Mount Thread Gauge 8-PIECE LUG NUT & WHEEL STUD CHECKER SET Wheel stud thread size gauge includes both male and female threads for checking lug nuts, wheel locks and wheel studs • Size permanently stamped onto each gauge • Color coded for easy identification INCLUDES: Purple (M12x1.25), Orange (M12x1.50), Pink (M12x1.75), Black (M14x1.50), Silver (M14x2), Red (9/16x18), Green (7/16x20) & Blue (1/2x20) CHAMFER/NUT GAUGE • Kit shows when wheel chamfers and wheel nuts are worn out • Visual guide detects excessive wear in bolt holes • APPLICATION: For use with steel stud piloted wheels 401-69290 ASCOT NO. MFG. NO. 493-00801 8TGCS DESCRIPTION 8-Piece Lug Nut & Wheel Stud Thread Checker Set 114 493-00801 PORTABLE TRUCK WHEEL STUD REMOVER & INSTALLER • Power of a 10-ton shop press • Remove and install studs without removing the hub • Two-hour job is done in twenty minutes without risk of damaging seals or bearings • Any mechanic can use it to get the job done right in minutes ASCOT NO. MFG. NO. 401-69290 69290 DESCRIPTION Chamfer Nut Gauge ALCOA WHEEL INSTALLATION SLEEVES • Align wheel bolt holes • Seat brake drums that have .980" diameter bolt holes • Prevent damage to M22x1.5 studs • Assist in lining up all components for ease of install • INCLUDES: 2 tools per kit • Made in USA 492-06346 491-00426 ASCOT NO. MFG. NO. 491-00426 407422 DESCRIPTION Alcoa Wheel Installation Sleeves ASCOT NO. MFG. NO. 492-06247 492-06346 6247 6346 DESCRIPTION PakPress Cart Complete PakPress Kit (Includes Cart) POWER OF A 10-TON SHOP PRESS

115 WHEEL SERVICE PRODUCTS STUD & HUB CLEANING TOOLS COUNTERACT WHEEL PRO STUD & HUB BRUSHES • Easily switch from stud cleaning to hub/wheel cleaning in a matter of seconds • Covers a large majority of automotive/light truck and trailer applications • 6 per pack• Stud & hub cleaner tool sold separately 402-01640 COUNTERACT WHEEL PRO AUTOMOTIVE/ LIGHT TRUCK STUD & HUB CLEANER TOOL 402-11114 402-01650 ASCOT NO. MFG. NO. 402-01640 WP-HB1640 402-01650 WP-HB1650 402-11114 WP-SB14 COUNTERACT WHEEL PRO XL COMMERCIAL STUD & HUB CLEANER • Comes with one tool body and 22mm stud cleaning brush • Vented tool body allows rust and debris to dissipate while cleaning to avoid • Easily switch from stud cleaning to hub/wheel cleaning in a matter of seconds • Covers over 90% of all commercial truck wheelend applications • 6-pack replacement 22mm stud brush inserts available separately – 402-10122 • 6-pack replacement 60mm hub/wheel cleaning discs available separately – 402-10222 ASCOT NO. MFG. NO. 402-10022 WPXL-T22 402-10122 WPXL-HB22 402-10222 WPXL-SB22 DESCRIPTION Counteract Wheel Pro Replacement 16mm Hub Brush - 40mm - 6 Per Pack Counteract Wheel Pro Replacement 16mm Hub Brush - 50mm - 6 Per Pack Counteract Wheel Pro Replacement 16mm Hub Brush - 40mm - 6 Per Pack ASCOT NO. MFG. NO. 402-10012 WP-T12 402-10112 WP-SB12 402-10222 HUB BUDDY TOOL • IMPACT RATED: No need to change tools • Complies with best practice R.I.S.T. procedure • Removes rust, corrosion and other build-up from wheel stud, drums and tire rim • Helps proper torque of lug nuts by removing corrosion • A must for easy and accurate tire balancing • INCLUDES: 1 Hub Buddy XL attachment and 1 cleaning disc head • Replacement cleaning discs available in packs of 6 (Product # 402-37335) 402-10122 402-10022 402-37335 DESCRIPTION Wheel Pro XL Commercial Hub & Stud Cleaner Tool Wheel Pro XL Replacement 22mm Hub Brush-60mm - Pack of 6 Wheel Pro XL Replacement 22mm Stud Brush - Pack of 6 ASCOT NO. MFG. NO. 402-37330 402-37335 402-37340 37330 37335 37340 DESCRIPTION Hub Buddy Tool 2" Hub Buddy Tool Replacement Pads 1-1/2" Hub Buddy Tool Replacement Pads DESCRIPTION Counteract Wheel Pro Automotive/ Light Truck Stud & Hub Cleaner Tool Wheel Pro Replacement 12mm Stud Brush - 40mm - 6 Per Pack 402-37330 • Comes with one tool body and 12mm stud cleaning brush • Vented tool body allows rust and debris to dissipate while cleaning to avoid tool lock which can break or snap the tool body • Easily switch from stud cleaning to hub/ wheel cleaning in a matter of seconds • Covers a large majority of automotive/light truck and trailer applications • 6-pack replacement 12mm stud brush inserts available separately – 402-10112 402-10012 402-10112

WHEEL SERVICE PRODUCTS STUD & HUB CLEANING TOOLS PROFESSIONAL STUD/HUB BRUSH KIT • Ideal for hub and stud cleaning job with ease • QUICK AND EASY: Change brushes in seconds • Includes a 1/2" drive adapter • Powered by a cordless drill • Replacement brushes available ASCOT STUD KLEEN TOOLS AND PADS • Metal Housing is reuseable • Ergonomically designed for ease of use • No Tools needed • Proprietary abrasive pad last 30x longer • Easy to remove and replace in seconds Scan for video! 116 402-10101 402-10100 402-32613 402-32615 ASCOT NO. MFG. NO. 402-32611 402-32613 402-32614 402-32615 402-32616 203611-ASC 203613-ASC 203614-ASC 203615-ASC 203616-ASC DESCRIPTION REPLACEMENT COMPONENTS FOR STUD/HUB BRUSH KIT Plastic Hub/Stud Tool & Adapter 4-Pack of Replacement 14mm Stud Brushes 4-Pack of Replacement 22mm Stud Brushes 4-Pack of Replacement Passenger Hub Brushes 4-Pack of Replacement Truck Hub Brushes ASCOT NO. MFG. NO. 402-32610 DESCRIPTION 203610-ASC Stud/Hub Brush Kit ASCOT NO. MFG. NO. 402-10100 402-10101 402-10104 402-10104 DESCRIPTION SKT101R SKT101C SKT101C-4Pk Truck, Stud & Hub Cleaner by StudKleen Replacement Head for Stud Kleen Tool - EA Replacement Heads for Stud Kleen Tool - 4-PACK

117 WHEEL SERVICE PRODUCTS STUD & HUB CLEANING TOOLS WHEEL HUB GRINDER 3M BRAKE HUB CLEANING DISCS • Extremely tough three-dimensional web • Non-metallic attachmen and disc pad holder • Roloc disc locks securely; 1/2 turn on, 1/2 turn off • Ideal for use on right angle air tools • KIT CONTAINS: 5 Scotch-Brit Roloc Brake Hub Cleaning Discs and 1 3M Brake Hub Cleaning Disc Holder • Special grinder for cleaning the wheel centering device as well as the attachment area between the wheel and hub • Burned in corrosion residues are completely removed in a quick and easy process • Actual cleaning time per hub only takes between 3-25 seconds depending upon residue thickness • Replacement Discs Available 402-43352 ASCOT NO. MFG. NO. 402-07545 402-07546 07545 07546 402-07547 07547 DESCRIPTION 3M Brake Hub Cleaning Disc Holder 3M Scotch-Brite Roloc Brake Hub Cleaning Discs - 10 Discs 3M Scotch-Brite Roloc Brake Hub Cleaning Disc Kit ARLIE TOOL • Designed for speed, the ARLIE TOOL quickly and effectively cleans the lug stud and mating surfaces of truck wheel components, getting you back on the road faster • Using the ARLIE TOOL helps ensure proper torque can be applied, achieves the correct clamping force, and aids in the visual inspection of components, all contributing to enhanced safety • Boost your productivity with the ARLIE TOOL. It reduces work time by 75% and easily attaches to any power-driven tool capable of accepting a 1/2" square drive, with a maximum rotation of 4000 RPM. INNER RIM CLEANER AND REPLACEMENT DISCS 402-00010 ASCOT NO. MFG. NO. 402-00001 402-00010 402-00020 402-00030 402-00002 402-00012 402-00032 402-00003 402-00013 402-00033 AT-001 AT-010 AT-020 AT-030 AT-002 AT-012 AT-032 AT-003 AT-013 AT-033 DESCRIPTION ARLIE Tool Complete 22MM Commercial Truck ARLIE Tool Complete Passenger/Light Truck 11MM ARLIE Tool Complete Small OTR 19MM ARLIE Tool Complete Large OTR 33MM Commercial 22MM Abrasive Head P/LT 11MM Abrasive Head Large OTR 33MM Abrasive Head Commercial 22MM Inner Brush P/LT 11MM Inner Brush Large OTR 33MM Inner Brush 402-43358 ASCOT NO. MFG. NO. 402-43357 402-43358 433 507 433 508 DESCRIPTION Inner Rim Cleaner Replacement Discs (3 per Box) • Meant for the optimal cleaning of the inner wheel contact surface • Prevents corrosion related distortion of wheel bolt tightening torque • Allows for the complete removal of burnt in corrosion • Used only on the inside of an aluminum rim • Velcro adhesive makes it easy to change out replacement discs • 75mm diameter in size • REPLACEMENT DISCS AVAILABLE: 3 per box Wheel Hub Grinder in action. ASCOT NO. MFG. NO. 402-43352 402-43351 DESCRIPTION 433 502/M Wheel Hub Grinder 433 501 Grinder Replacement Discs (3 per package) 402-43357

WHEEL SERVICE PRODUCTS LIFTING EQUIPMENT Bottle Jacks Service Jacks Jack Stands Specialty Jacks Transmission Jacks Wheel Dollies Vehicle Stands & Accessories Shop Cranes 118

TOOLS BUILT AROUND SAFETY all around the wheel... and so much more... LIGHTWEIGHT cylinders 100 TON CAPACITY LOCKING CRIBBING SYSTEM 55-100 TON RATED CYLINDERS model 10312 model 10314 model 10317 model 10318 SAFELY LIFT THE LOAD & SECURE THE LOAD WITH ONE RELIABLE & SAFE SOLUTION. 55 TON STYLE model 10808 100 TON STYLE model 10809 model 50185 ARRIVAL! NEW MARK IT. BLOCK IT. KEEP IT SAFE... 30 FOOT LONG DESIGN COVERS ENTIRE WORK AREA WITH EASE. MEGABITE WORKS WITH THE BEAD BREAKER TO HOLD THE BEAD BROOKSVILLE, FL model 20436 model 20437 BOTTOM PLATE 2 HANDLE DESIGN NEW

LIFTING EQUIPMENT BOTTLE JACKS PROFESSIONAL BOTTLE JACKS 20-TON AIR/HYDR BOTTLE JACK • Thick jack base provides e support and stability in se • Quick-connect featur allows easy disconnec of air hose & more c 120 301-20220 SPECIFICATIONS Ascot No. Mfg. No 301-20220 Min. Hgt. Max Hgt. AS20 Hyd. Lift Range 10-1/8" 19-7/8" 6-1/2" 3-1/8" N/A N/A Exten. Screw Chassis Size/Ht. Saddle Size Handle Length Ship Wt. (Lbs) 9-3/8" 35.1 20-TON SHORT AIR/HYDRAULIC BOTTLE JACK • Thick jack base provides exceptional support and stability in severe conditions • Quick-connect 301-20227 228 Limit Ring Assy. 301-20225 Pump Core Assy. TON BOTTLE JACK REPLACEMENT PARTS Ascot No. Mfg. No. 1-20224 AS2022-04 301-20221 Seal Kit for Piston Rod 301-20222 Release Valve 301-20224 Oil Fill Plug 301-20226 Oil Valve 301-20229 Air Motor Desc. 1-20222 AS2002-02 Release Valve Oil Fill Plug 1-20225 AS2022-05 Pump Core Assy. SPECIFICATIONS Ascot No. Mfg. No. 301-20221 Min. Hgt. 7" Max Hgt. AS2022S Hyd. Lift Range 12-5/8" 3-3/8" 1-20226 AS2022-06 Oil Valve Description 20-Ton Short Air/Hydraulic Bottle Jack Exten. Screw Chassis Size/ Ht. Saddle Size 2-3/9" N/A N/A Handle Length 9-3/8" Ship Wt. (Lbs) 30.6 1-20227 AS2022-07 Seal Kit for Piston Rod 301-20228 AS2022-08 Limit Ring Assy. 301-20229 AS2022-09 Air Motor 301-20255 AS2022-10 Air Hose Assy. Applicable Models 20-Ton/20Ton Short 20-Ton/20Ton Short 20-Ton/20Ton Short 20-Ton/20Ton Short 20-Ton/20Ton Short 20-Ton/20Ton Short 20-Ton/20Ton Short 20-Ton/20Ton Short

121 LIFTING EQUIPMENT PORTABLE BOTTLE JACKS HEAVY DUTY BOTTLE JACKS • For heavy duty truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting, pushing, spreading, bending, pressing, or straightening are required • Two piece zinc plated handle • Prevent rust with “Parkerized” pump piston, ram and extension screw • No leak “Uniweld” construction • 50% safety overload factor • State of the art design reduces repair time • Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances • Lightweight forged base provides more steel only where strength is required • The heavy-duty extension screw and release valve were designed to eliminate parts and reduce the chances of breakage and excessive wear • Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard • Made in Japan MADE IN JAPAN ® PROFESSIONAL LIFTING EQUIPMENT 12 AND 20-TON CAPACITY BOTTLE JACKS • Contains same features as the 2, 3, 5 and 8-ton capacity bottle jacks • Carrying handles • Made in Japan HEAVY DUTY MADE IN JAPAN ASCOT NO. MFG. NO. 301-76412 301-76512 301-76520 301-76820 76412B 76512B 76520B 76820B CAPACITY (TONS) 12-1/2 12-1/2 22 22 MIN. HEIGHT MAX. HEIGHT 9-7/16" 6-11/16" 10-13/16" 8-1/4" 18-7/8" 13-3/16" 20-3/16" 14-15/16" LIFTING HANDLE Yes Yes Yes Yes 12 AND 20-TON CAPACITY AIR/HYDRAULIC BOTTLE JACKS • Fast efficient air pump reduces lifting time and has a built-in relief mechanism which prevents the jack from being used beyond its maximum capacity • Convenient push but connected to an in-line filter prev from entering the air/hydraulic s design allows for manual operation when air is not available • Two piece zinc pla • Parkerized coating on pump pis extension screw and extension adapt and chrome coated ram offer pro against rust • Longer wear life due t internally machined oil passages, smoo bearing surfaces and close tolerances • Safety oil bypass system prevents the ram from being overextended and causing damage to the cylinder • Made in Taiwan ASCOT NO. 301-76502 301-76503 301-76505 301-76508 301-76535 301-76560 MFG. NO. 76502B 76503B 76505B 76508B 76535 CAPACITY (TONS) 2 3 5 8 35-Ton 76560 60-Ton MIN. HEIGHT MAX. HEIGHT 7-1/8" 14-1/2" 7-1/2" 9-1/16" 9-1/16" 11" 12" 15 19/16" 18-7/8" 18-3/4" 17-5/16" 18-11/16" LIFTING HANDLE No No No Yes Yes Yes ASCOT NO. MFG. NO. 301-76312 301-76320 301-76720 301-76721 76312B 76320B 76720B 76721A CAPACITY (TONS) 12 20 20 20 MIN. HEIGHT MAX. HEIGHT 9-15/16" 10-7/8" 8-1/4" 7-3/4" 19-3/4" 20-1/2" 14-1/2" 11-3/4" HANDLE LENGTH 23.5" 23.5" 23.5" 23.5"

LIFTING EQUIPMENT 2 TO 30-TON CAPACITY BOTTLE JACKS • All models have a chrome main ram and a chrome pump piston • The extension screws have a pressed thread • These units can be used horizontally and vertically BOTTLE JACKS LOW PROFILE AIR BOTTLE JACK • Low Profile Jack with a 20-Ton capacity • This unit includes a welded base to prolong service • Comes equipped with a chrome main ram and aluminum air motor to guarantee optimum lifetime • Air filter and air regulator connected to a hose included 122 HAND-TESTED IN USA WELDED BASE 301-43202 301-41020 301-41200 EXT. MIN. ASCOT NO. MFG. NO. 301-41020 301-41040 301-41060 301-41080 301-41150 301-41200 301-41201 301-41300 G410200 G410400 G410600 G410800 G411500 G412000 G412001 G413000 CAPACITY 2-Ton 4-Ton 6-Ton 8-Ton 15-Ton 20-Ton 20-Ton Short 30-Ton 20-TON MOORE SAFE BOTTLE JACKS • Comes with 2 interchangeable adaptor heads • Maintains the center of gravity while lifting • Dramatically reduces the chance of vehicle drops • Makes jack positioning easy • 20-Ton Lifting Capacity HEIGHT 6.22" 7.68" 7.87" 9" 9.84" 9.53" 6.61" 9.53" MAX. HEIGHT 11.73" 14.57" 14.76" 18" 19.29" 18.58" 11.22" 18.39" EXT. SCREW 2" 2" 2" 3.19" 3.15" 3.15" 1.57" 3" ASCOT NO. MFG. NO. 301-43202 G432021 CAPACITY 20-Ton MIN. HEIGHT MAX. HEIGHT 10.31" 5.75" SCREW 1.87" 20-TON AIR/HYDRAULIC BOTTLE JACK • This 20-Ton Capacity jack is one of the toughest in the market • Each unit comes equipped with an air regulator, a chrome ram and welded base so that it will keep on working no matter the job • Each unit is hand-tested before shipping to guarantee maximum reliability WELDED BASE ASCOT NO. MFG. NO. 301-00020 301-00021 GT-20MS GT-20MSLP CAPACITY 20-Ton 20-Ton MIN. HEIGHT MAX. HEIGHT 19" 11" 7.38" 11.75" ASCOT NO. MFG. NO. 301-43220 G432020 HANDEXT. CAPACITY 20-Ton MIN. HEIGHT MAX. HEIGHT 10" 18.5" SCREW 3.15"

123 LIFTING EQUIPMENT PORTABLE BOTTLE JACKS 20-TON AIR/HYDRAULIC BOTTLE JACK • 90-180 PSI • Factory pre-tested to 150% of rated capacity • Safety bypass system • Dual ram return springs • Saddles are machinehardened steel • Expertly crafted in accordance with the strictest industry standards • Made to ensure the highest level of quality and value ASCOT NO. MFG. NO. 302-55200 MIN. HEIGHT 10-1/2" MAX. HEIGHT LIFT 6-1/4" 20" CAPACITY 5520B 20-Ton BASE SIZE 9-1/2" x 6-1/2" EXTERNAL SCREW WT. (LBS) 3-7/8" 39 lb. 12, 20 AND 30-TON CAPACITY SUPER DUTY AIR/HYDRAULIC BOTTLE JACKS • Welded tank and frame for superior strength • Thick base design provides the most stable lifting platform • Dual return springs help provide controlled and easy descent • Shielded release screw prevents accidental lowering • Specially engineered air motor for consistent and reliable operation BOTTLE JACKS IN USE ASCOT NO. MFG. NO. 301-04461 301-14460 301-14461 301-14475 301-14480 14461 CAP. 20-Ton 14460 20-Ton 14464 20-Ton 14475 30-Ton 14480 50-Ton MIN. HEIGHT MAX. HEIGHT WT. (LB.) 5-4/5" 9-3/4" 5/8" 11" 12" 10" 18-1/2" 10' 18" 19" PREMIUM AIR/HYDRAULIC BOTTLE JACKS • Flexilla whip hose for longer life and maximum durability in all climate conditions • In-line regulator limits inlet pressure to 94 PSI to prevent air bypass • 10" x 10" 50-ton jack plate 14453 included for optimal weight displacement on uneven or non-compacted surfaces 301-05621 301-05612 301-14455 301-05630 301-05620 21 38 21 60 138 TITAN AIR/HYDRAULIC BOTTLE JACKS • Cylinder is welded to the base, assuring strength and eliminating leaks • Chromed pump piston and ram for added rust resistance • Extension screw gives added height when necessary • Super low minimum height for easy access ASCOT NO. MFG. NO. 301-14455 MIN. ASCOT NO. MFG. NO. 301-05612 301-05620 301-05621 301-05630 5612SD CAPACITY 12-Ton 5620SD 20-Ton 5621SD 20-Ton HEIGHT 9-23/25" 10-37/100" 7" MAX. HEIGHT LIFT 18-49/50" 5-91/100" 20-63/100" 6-19/50" 12-3/4" 3-7/20" 5630SD 30-Ton 10-47/50" 20-59/100" 5-91/100" BASE SIZE AIR PRESSURE CAP. 14455 20-Ton AIR INLET FITTING 8-27/100" x 5-31/100" 110-120 PSI 1/4" NPT 5-3/4" x 9" 5-7/10" x 8-27/100" 9-13/20" x 7-9/100" 110-120 PSI 1/4" NPT 110-120 PSI 1/4" NPT 110-120 PSI 1/4" NPT MIN. HEIGHT MAX. HEIGHT 9-3/4" 18-1/2" WT. (LBS) 35 45 36 65

LIFTING EQUIPMENT JACK PLATES JACK PLATES • SIZES AVAILABLE: 12" x 12" x 1" and 18" x 18" x 1" • 100-ton capacity for both sizes • Provides stability to bottle jacks, hydraulic rams, jack stands and cribbing • Nonskid surface • Constructed of engineered thermoplastic material • MADE IN THE USA MADE IN THE USA ASCOT NO. MFG. NO. 309-12121 309-18181 D1212 D1818 DESCRIPTION 12" x 12" x 1" Jack Plate 18" x 18" x 1" Jack Plate 309-12121 TITAN JACK PLATES 309-18181 • Each unit has non-skid surface to prevent jacks from sliding under wet or oily conditions • When it is necessary to provide a firm foundation, the base of the jack shall be blocked or cribbed • Lightweight and easy to handle ASCOT NO. MFG. NO. 309-14464 309-14465 309-14466 309-14468 309-14472 309-14473 309-14462 309-14463 309-14469 14464 14465 14466 14468 14472 14473 14462 14463 14469 DIMENSIONS 12” x 12” x 1” 12” x 12” x 1.5” 18” x 8” x 3” 24” x 24” x 2” 18” x 18” x 1” 18” x 18” x 1.5” 36” x 36” x 2.5" 36” x 36” x 3” 18” x 18” x 2” CAPACITY 50-Ton 100-Ton 200-Ton 100-Ton 50-Ton 100-Ton 150-Ton 200-Ton 100-Ton WT. (LB.) 5 8 21 24 15 16 118 135 20 NON-SKID SURFACE GRIP-IT SERIES JACK PLATES • New pyramid surface on one side is designed to mate with Super Stacker Cribbing Blocks pyramid surface for secure, exact fit, as well as provide better grip onto uneven terrain in the field • Provides increased stability and gripping surface • Complies with OSHA regulation 29 CFR 1926.305 • CAPACITY: 100 tons • Model 14503 bottom locking plate locks onto Super Stacking Cribbing, helping to secure the load while preventing the release of hazardous energy ASCOT NO. MFG. NO. 309-14500 309-14501 309-24468 309-14468 309-14503 14500 14501 14468B 14468LT 14503 TYPE Standard Plate 12" x 12' x 2" Standard Plate 12" x 24' x 2" Standard Plate 24" x 24' x 2" Standard Plate 24"x24" x 2" Bottom Locking Plate DIMENSIONS CAPACITY WT. (LB.) 100-Ton 100-Ton 8.8. 17.8 100-Ton 36.3 100-Ton 24 27" x 24" x 2" 100-Ton 38.4 309-14503 309-14466 Shown with Super Stacker PYRAMID SURFACE ON 124

125 LIFTING EQUIPMENT SERVICE JACKS 3-1/2 TON FLOOR JACK • Low profile • Double pump design for quick lifting and improved efficiency • Heavy steel construction for maximum durability • Equipped with a foot pedal to allow for hands free positioning 302-05605 PROFESSIONAL SERVICE JACKS 4-TON FLOOR JACK • Low profile • Double pump design for quick lifting and improved efficiency • Heavy steel construction for maximum durability • Equipped with a foot pedal to allow for hands free positioning 302-05614 ASCOT 6-TON FAST-TO-LOAD LONG CHASSIS JACK • Heavy-duty construction provides stability and endurance • Fast to load, it takes 1 full stroke to load, and 3 pumps to maximum height under no load • Controlled descent with speed limit to ensure safe operation • Chrome plated ram for additional rust resistance • Super FAST and easy assembly • Handle locks in vertical, 45 degree or horizontal positions and has independent release knob • Swivel rear casters provide smooth maneuvering and positioning • Overload and bypass safety valves prevent use beyond the rated capacity and over extension of the ram • Meets or exceeds ASME PASE-2024 Standards 302-05616 Ascot No. 302-05605 302-05614 302-05616 Mfg. No. AS5605 AS5614 AS5616 Description Min. Hgt. Ascot 3-1/2-Ton Floor Jack Ascot 4-Ton Floor Jack Ascot 6-Ton Fast-To-Load Long Chassis Jack Max Hgt. Hyd. Lift Range 3-3/4" 20-1/2" 16-3/4" 4-3/8" 20-1/4" 16" 5-7/8" 259/16" Exten. Screw N/A N/A 42-5/8" N/A Chassis Size/Ht. 27.2" x 14.25" 27.7" x 14.4" 54-3/4" x 16-13/16" Saddle Size 4-1/4" 4-1/4" Handle Length 47-7/8" 47-7/8" 5-1/8" 42-5/8" Ship Wt. (Lbs) 100 102.5 185 lbs.

LIFTING EQUIPMENT PROFESSIONAL SERVICE JACKS LOW PROFILE FLOOR JACKS • Low profile • Double pump design for quick lifting and improved efficiency • Heavy steel construction for maximum durability • Equipped with a foot pedal to allow for hands free positioning 302-05603 3-Ton Aluminum Floor Jack SERVICE JACKS 302-05601 2-Ton Floor Jack 126 302-05613 3-Ton Floor Jack Ascot No. 302-05601 302-05603 302-05613 Mfg. No. AS5601 AS5603 AS5613 Description Min. Hgt. Ascot 2-Ton Low Profile Floor Jack Ascot 3-Ton Aluminum Floor Jack W/Steel Wheels Ascot 3-Ton Floor Jack LOW PROFILE FLOOR JACK REPLACEMENT PARTS Ascot No. Mfg. No. 302-60129 302-88587 302-61301 302-60102 302-60208 302-61402 302-70703 302-61401 302-60109 302-60205 302-61606 302-61403 302-60107 302-60215 302-70701 Description 5601-29-A-FH Spring TT-587 5613-01 Spring 5601A-02 5602-08 5614-02 5707-B-03 5614-01 5601-09 5602-05 5616-06 5614-03 5601-07 5602-015 5707-B-05 Fixed Wheel Assembly Fixed Wheel Assembly Fixed Wheel Assembly Fixed Wheel Assembly Fixed Wheel Assembly Seal Kit for Pump Seal Kit for Pump Seal Kit for Pump Seal Kit for Pump Pump Pump Pump Pump 2-3/4" Max Hgt. 24" Hyd. Lift Range 21-1/4" 3-1/8" 19-7/8" 16-3/4" Exten. Screw N/A N/A 3-3/8" 24-1/4" 20-7/8" N/A Chassis Size/Ht. 31.9" x 14" 31.5" x 13.5" 31.4" x 14.4" Saddle Size 3-7/8" 3-7/8" Handle Length 47-7/8" 47-7/8" Ship Wt. (Lbs) 102.3 4-3/8" 47-5/8" 64 105.4 Applicable Models 2T, 3.5T, 3T, 4T 2.5T 3.5T, 3T 2T 2.5T 4T 3T AI Hybrid 3.5T, 3T, 4T 2T 2.5T 3T AI Hybrid 3.5T, 3T, 4T 2T 2.5T 3T AI Hybrid 302-61301 Fixed Wheel Assy. 301-61402 Fixed Wheel Assy. 302-61401 Seal Kit for Pump 302-61404 Caster Ascot No. 302-61404 302-61503 302-70702 302-60522 302-61305 302-60508 Mfg. No. 5614-04 5615-03 5707-B-02 5605-A-2 5613-05 5605-08 Description Caster Caster Caster Applicable Models 4T 2T, 2.5T, 3T, 3.5T 3T Rubber Saddle Pad Assembly Saddle Assembly Saddle Assembly 302-61403 Pump 2T, 2.5T, 3T, 3.5T, 4T 2T, 2.5T, 3T 3.5T, 4T 302-60129 Spring

127 LIFTING EQUIPMENT SERVICE JACKS 2-TON LOW-RIDER FLOOR JACKS • Super low pickup height of 2-3/4" • Equipped with a double pump design to increase speed without compromising performance • Universal joint technology and precision release valve for a more controlled release • Safety valve prevents overload • Tough UV powder coated frame for greater protection and durability • Pinned steel saddle (1" stud) with rubber pad for added vehicle protection and durability • One-piece foam covered 50" handle for ease of positioning, pumping and storage 3.5-TON CAPACITY PROFESSIONAL HEAVY DUTY FLOOR JACKS • Pinned steel saddle (1-1/8" stud) with rubber pad for added vehicle protection • Rear-mounted 2-3/4" swivel casters for ease of maneuverability • One-piece 50-1/4" padded handle parks upright • Handle ships separately • Equipped with a double pump design to increase speed without compromising overall performance of the jack • Second volume pump assists in getting the saddle to load much quicker than most other single pump designs on the market today 302-00200 4-TON HEAVY DUTY FLOOR JACK HANDLE PROTECTORS • Twin hydraulic system for fast and efficient lifting • Heavy duty pump, ram, and cylinders are precision machined and inspected to ensure long service life • High grade U-cup seals and high pressure plunger for maxium performance • Rear mounted swivel casters for easy maneuverability • Universal joint technology provides a more controlled descent • Pinned and padded saddle for extra vehicle protection • Flanged side plates for increased stability • Integrated parts tray keeps small components from getting lost • Meets ASME 2014 standards HEAVY DUTY FLOOR JACKS IN USE • Made of a durable synthetic rubber • Fits multiple jack manufacturers’ handles and popular tire tools • Unique design ensures a tight fit on jack/tool handle without slippage • Protects vehicles from scratches or dents caused by falling jack handles and unstable tools in the shop • Patent Pending design absorbs the dent/scratch-causing force as the handle contacts an adjacent vehicle 302-40000 448-01102 448-01103 448-01801 ASCOT NO. MFG. NO. 448-01102 448-01103 448-01801 FLOOR JACK SPECIFICATIONS ASCOT NO. 302-00200 302-35002 302-40000 MFG. NO. 200T 350SS 400SS CAPACITY (TONS) 2 3-1/2 4 MIN. HEIGHT / MAX. HEIGHT 2-3/4" / 20" 4" / 19-1/2” 4-1/4" / 20-1/2" LENGTH 27" 29" 28" WIDTH REAR) WEIGHT (LB.) 99 15" 15" 14.33" 120 105 DESCRIPTION GHP-01 Y GHP-01 R ASM1801B Yellow Handle Protector Red Handle Protector Floor Jack Extra Grip Handle Proector

LIFTING EQUIPMENT SERVICE JACKS BIG FOOT JACK PLATE • The BIG FOOT 50 Ton jack plate promises to provide additional stability and support when using a high-capacity jack on uneven terrain • Thanks to its recessed interior lifting area, accidental jack movements are less likely • This, combined with the extra-large footprint, improves overall safety for the operator and equipment GARAGE JACKS • The professional universal joint release valve makes it possible to lower the jack with load very precisely • The pump piston (protected with jacket to prevent from intrusion of dirt) is placed at a 45° angle so a complete pumping stroke will always be utilized • The jack has a chrome main ram CHROME MAIN RAM UNIVERSAL JOINT RELEASE VALVE 128 302-20337 302-90050 ASCOT NO. MFG. NO. 302-90050 DESCRIPTION G490050 22-TON JACK STANDS • Our heavy-duty 22 Ton capacity Winntec Jack Stands have a welded steel construction for superior safety and strength • Nylon wheels and a removable handle ensure quick and safe positioning under most vehicles • They also have a screw top extension for fine tune adjustments • (Sold as a set of 2) Big Foot Jack Plate 50-Ton ASCOT NO. MFG. NO. 302-42033 302-20333 302-20337 G420303 G420333R G420337US CAPACITY (TONS) 3-Ton (Turbo Lifter) 3-Ton 3.7-Ton WINNTEC 3.5-TON FAST LOCK JACK BLOCK • Ultimate accessory to extend the life of your floor jack • Extends 217mm (8.54”) to 352mm (13.86”) and is equipped with a spring release for easy positioning • A must have for quickly and safely supporting all kinds of vehicles, especially those that don’t show multiple lift/support points • Highly recommended for those workshops and mobile operators that service EV’s • Works with most floor jacks • Quick install spring release • safety pin for double safety ASCOT NO. MFG. NO. 302-52205 DESCRIPTION G452205 22-Ton Jack Stands MIN. HGT. / MAX. HGT. WT. (LB.) 5.12" / 19.29" 3" / 19.80" 4.13" / 20.47" 90 78 99 ASCOT NO. MFG. NO. DESCRIPTION 302-45035 G450350 Winntec 3.5-Ton Fast Lock Jack Block FAST LOCK JACK BLOCK IN USE

129 LIFTING EQUIPMENT SERVICE JACKS 20-TON CAPACITY MOBILE ROADSIDE SERVICE JACKS • Intended for heavy duty truck, agricultural and heavy construction equipment • Designed for use on mobile service trucks • Perfect for roadside service • Long handle with 45-1/2” reach helps in positioning of jack under vehicles with low overhang • Removable handle for shipment or storage • Hand grip also works as a stand to store the jack in a vertical position • Compact design fits easily between tandem wheels • Fast efficient air pump reduces lifting time and has a built-in relief mechanism which prevents the jack from being used beyond its maximum capacity • Made in Taiwan ® PROFESSIONAL LIFTING EQUIPMENT STEEL 302-71500 HYDRAULIC BLOCK ASSEMBLY 302-72091 HEAVY DUTY CAP. ASCOT NO. MFG. NO. 302-71000 302-71100 302-71500 302-71550 302-72220 302-72230 71000D 71100A 71500G 71550G 72220A 20 72230A 20 (TONS) MIN. HGT. / MAX. HGT. 6-1/2" / 27-1/4" 6-1/2" / 27-1/4" 6-1/4" / 27-1/4" 6-1/4" / 26-1/4" 6-1/2" / 26-1/4" 6-1/2" / 26-1/4" 10 10 5 5 HANDLE LENGTH WT. (LB.) 46-3/4" 455 46-3/4" 466 42-1/2" 45" 45" 45" 119 270 650 670 * 302-71100, 302-71550 and 302-72230 have Air Hydraulic Features ASCOT NO. MFG. NO. 302-72081 302-72091 72080A 72090A CAPACITY (TONS) 20 20 REMOVABLE HANDLE MIN. HEIGHT / MAX. HEIGHT WT. (LB.) 11-1/8" x 28-5/8" 8-5/5" x 22-3/4" 70 63

LIFTING EQUIPMENT SERVICE JACKS 20-TON TRUCK JACKS • Patented “Speed Pak” provides effortless lift • Large rubber wheels enhance mobility • Automatic valve prevents overloading • Extension screw permits pickup height adjustment • 2 Year Warranty 302-93731 130 CAP. ASCOT NO. MFG. NO. 302-93731 HW93731 (TONS) 20 MIN. / MAX. HEIGHT 9-1/4" / 17-3/4" POWER RAISE 5-1/2" HANDLE LENGTH 39-1/2" EXT. BASE SIZE 8-3/4" x 5-1/2" SCREW 2-1/2" 20-TON CAPACITY AIR/HYDRAULIC SERVICE JACKS • Compact, powerful design quickly lifts rated capacity • Large 8” rubber wheels • Low height allows lifting from axle or suspension • Pressure relief valve prevents overloading • Rapid two-speed air hydraulic action quickly advances ram to load • Chrome plated plunger for extended jack life • Optional height adapters HW93265 • 2 Year Warranty CAP. ASCOT NO. MFG. NO. 302-93733 (TONS) HW93733 20 MIN. / MAX. HEIGHT 9" /19-3/4" POWER RAISE 6" HANDLE LENGTH 52-1/2" EXT. BASE SIZE 8" x 17" SCREW 4-3/4" 110OPERATING PRESSURE WT. (LB.) 110-150 PSI 69 LARGE RUBBER WHEELS OPER PRES 302-93733 20-TON AIR/HYDRAULIC SERVICE JACKS WITH CART • Unit includes a welded base to prolong service • Chrome main ram and aluminium air mot guarantee optimum lifetime • Air filter, connected to hose, included • C ASCOT NO. MFG. NO. CAP. (TONS) MIN. / MAX. HEIGHT 302-43202 G432003 20 10" / 18.9” 20-TON TRUCK RAMPS • Specifically designed for heavy-duty tasks • 33” Long T-handle increases mobile efficiency • Sold in set of t 302-93200 HEAVY DUTY LONG T-HANDLE ASCOT NO. MFG. NO. CAP. (TONS) 302-93200 93200 20 FRAME SIZE WHEEL DIAM. HANDLE LENGTH WT. (LB.) 13-1/2" x 45” 5" 33-3/4" 267

131 LIFTING EQUIPMENT SERVICE JACKS 25-TON AIR/HYDRAULIC TRUCK JACK • Heavy-duty spring return for manually controlled retraction • Narrow chassis fits between tandem truck wheels • Fully welded pump provides superior strength and leak-free extended service life • Wiper seal for additional ram protection from contaminates • Handles can be locked at vertical, 45 degree and horizontal positions • Large 8” diameter hard rubber wheels for easy positioning and maneuverability • Release knob at the top of the long T-handle works in any position • Comes with 3 adapters in different sizes • Overload and bypass devices prevent using beyond rated capacity • Meets or exceeds ASME PASE-2024 Standard Ascot No. Mfg. No. 302-19150 Description AS1915 25-Ton Air/Hydraulic Truck Jack Min. Hgt. Max Hgt. Hyd. Lift Range 10-1/2" 21-1/8" 6-1/8" Exten. Screw Handle Length 4-1/2" 45-1/4" 22-TON AIR/HYDRAULIC TRUCK JACK • Large air motor provides an exceptional quick lifting experience • Narrow chassis fits between tandem truck wheels • Comes with three adapters in different sizes that cater to different working requirements • Same load capacity with new lifting specs! Ascot No. Mfg. No. 302-19122 Min. Hgt. 8-5/8" Max Hgt. Description AS1912B 22-Ton Air/Hydraulic Truck Jack Hyd. Lift Range 17-1/2" 4-7/8" Exten. Screw 4" AIR/HYDRAULIC TRUCK JACK REPLACEMENT PARTS Ascot No. Mfg. No. 302-91504 302-91505 302-20147 302-91203 302-91503 302-91502 302-91564 302-91552 302-91506 302-91501 302-19538 302-20225 302-91201 302-91202 302-20229 302-91204 1915-04 1915-05 2014-07 1912-03 1915-03 1915-02 1915-64 1915-52 1915-06 1915-01 Description Limit Ring Assy Release valve Air Motor Seal Kit Seal Kit Adapter I Adapter II Adapter III Handle with saddle rack Pump Assy 1915-38 Wheel 2022-05 1912-01 1912-02 2022-09 1912-04 Air Hose Assembly Limit Ring Assy Release valve Air Motor Pump Assy Handle Length 45-1/4" Net Wt. (Lbs) 71.6 Ship Wt. (Lbs) 101.9 302-19150 25-Ton Air/Hydraulic Truck Jack PROFESSIONAL SERVICE JACKS Applicable Models 25-Ton 25-Ton 25-Ton 22-Ton 25-Ton 302-19122 22-Ton Air/Hydraulic Truck Jack 25-Ton & 22-Ton 25-Ton & 22-Ton 25-Ton & 22-Ton 25-Ton & 22-Ton 25-Ton 25-Ton & 22-Ton 25-Ton & 22-Ton 22-Ton 22-Ton 22-Ton 22-Ton

QUIPMENT SERVICE JACKS 22-TON CAPACITY AXLE JACK • Heat treated cylinder wall & chromed piston give added stability & longer jack life • Alloy steel lifting mechanism for added durability and operator safety • Precision engineered tolerances for maximum performance • ln-line filter to protect air motor from contaminants • Corrosion-resistant aluminum and nylon composite air motor • Ram extension kit included with 3/4", 2-3/4" and 4" extensions • Large 7-3/4" rear wheels for easy positioning • Automatic in-line oiler to lubricate air motor • Grommet retainers-no need for clevis pins • One-piece handle ASCOT NO. MFG. NO. 302-56502 565FT CAP. (TONS) 22 MIN. HGT. / MAX. HGT. RAM LIFT REACH WIDTH WT. (LB.) 8-3/4" x 21-1/2” 4-3/4" 61" 13" 107 302-56502 ® PROFESSIONAL LIFTING EQUIPMENT 22-TON CAPACITY AIR/ HYDRAULIC FLOOR JACKS • Long “T” handle helps in positioning jack under vehicles with obstructions of ground effects • Best seller! • Jack load release top mounted at “T” handle and allows for easy operation at any handle position • Handle locking lever secures handle in either vertical, horizontal or 45° position • Compact design fits easily between tandem wheels • Rust inhibitive coating on ram and extension screw offers longer equipment life • Large diameter wheels for easy maneuverability • Self-retracting ram eliminates manual lowering of jack • Fast operating and extremely durable • Includes 3 adapters of differing heights ASCOT NO. MFG. NO. CAP (TONS) 302-72200 72200D 22 MIN. HGT. / MAX. HGT. 9" / 18” PSI RANGE WT. (LB.) 85-200 115 TRUCK AXLE JACKS IN USE 132 TITAN 22-TON AIR/HYDRAULIC SERVICE JACK • Air operated and easy to maneuver • Single piece handle - will not break • Extension saddles include: (1 of each) 1", 2" & 4" • Operates with only 80 PSI of air pressure ASCOT NO. MFG. NO. CAP. (TONS) MIN. HGT. 302-14140 14140 22 9" STROKE LENGTH WT. (LB.) 6" 90

133 LIFTING EQUIPMENT SERVICE JACKS 35-TON CAPACITY SERVICE JACK 24-TON CAPACITY SER • This single stage air service jack deliv power • It is designed to meet and e of a quality jack at a very compe comes equipped with an extension scr pegs, and heavy duty wheels designed f ASCOT NO. MFG. NO. 302-43222 MIN. HGT. MAX. HGT. 8.46" 17.36" DES CAP. G432024 24HYD. LIFT RANGE 5.55" EXTEN. SCREW 3.35" WT. (LBS) 88.18 302-03531 3- YEAR WARRANTY ASCOT NO. MFG. NO. 302-03531 GT-3531 (TONS) 35 MIN. HGT. / MAX. HGT. 7.28" / 16.69" WT. (LB.) 93 • Carries a very wide hydraulic cylinder and three heavy duty wide adaptors to give it stability when lifting loads that tend to shift • Solid base makes the jack very durable and safe to operate • Provides a low minimum height enabling clearance on vehicles with low suspension • Recommended for carrying out up to a minimum of 30,000 lifts without fail • 3 Year Warranty 42/20-TON 2-STAGE ELECTROHYDRAULIC JACK 22-TON CAPACITY AIR OPER HYDRAULIC FLOOR JACK • All steel-welded construction built for hea T-handle for easy positioning of jack under v • Quick-lift mechanism allows for substan time when no load is involved • Spring r • Extension screw for fine adjustment be lifting limit • Built-in safety valve preven capacity • Specially processed air pump f 302-00224 • The GT-4220E brings together the reliability of hydraulic lifting and the ease of electric operation • With a 42/20-ton lifting capacity and smooth, one-touch control, it’s the ideal solution for technicians who demand efficiency without compromising safety • Electro-hydraulic performance for reliable lifting without hoses or wires • Compatible with multiple battery manufacturers including Milwaukee • Rugged chassis design for daily professional use • User-friendly remote for precise control and improved ergonomics 302-04220 Scan For Video! CAP. ASCOT NO. MFG. NO. 302-00224 ZATJ-22S-4 (TONS) 22 MIN. HGT. / MAX. HGT. 8" x 15-7/8" FRAME HEIGHT 7-1/4" CYLINDER LIFT EXT. SCREW 4-1/4" 3-5/8" WT. (LB.) CAP. 82 ASCOT NO. MFG. NO. 302-04220 GT-4220E (TONS) 42/20 MIN. HGT. / MAX. HGT. 5.9"/11.8" HYD. LIFT RANGE 5.9" EXTEN PEGS WT. (LB.) 1.8" & 3" 118

LIFTING EQUIPMENT SERVICE JACKS All Yak Jacks come with a 3-year extended warranty. YAK 66/33 TON 2-STAGE AIR HYDRAULIC JACK • Patented brass air motor • Ideal for garbage, concrete, crane and any other heavy vehicles • Comes complete with a .5", a 2.75" and a 4.75" stackable extension for up to 8" of extension • Min height is 8.66" / 220 mm • Max height w/o extensions are 17.72"/450 mm MADE IN ITALY YAK 3 STAGE 66/33/17-TON AIR/ HYDRAULIC JACK • Air hydraulic jacks with pistons moving back automatically. • Specifically designed for lifting buses and all vehicles with low profile axles • Stroke: 5" • Air Pressure: 116-145 PSI • Min. Height: 5.31", Max. Height: 10.05" • Weight: 110 Lbs. 134 ASCOT NO. MFG. NO. DESCRIP 302-92006 92006 YAK 44/22-TON AIR/ HYDRAULIC HD JACK • Air hydraulic jack for heavy vehicles, practical and easy to handle • The pistons move back automatically; the two descent valves guarantee perfect holding in all situations and controlled speed under load• Ideal for workshops, mobile workshops, tire repairers and bodywork shops • Stroke: 6" • Air Pressure: 116-145 PSI • Min. Height: 8.54", Max. Height: 18.38" • Weight: 101 Lbs. 2-Stage 66/33 Ton Air Hydraulic Jack ASCOT NO. MFG. NO. DESCRIPTION 302-92007 92007 YAK 4 STAGE 88/55/28/17TON AIR/ HYDRAULIC JACK • Air hydraulic jack for heavy vehicles, practical and effective • The pistons move back automatically; the two descent valves guarantee perfect holding in all situations and controlled speed under load • A complete range of jacks for all stroke and capacity requirements • Ideal for workshops, tire repairers and bodywork shops • Stroke: 11" • Air Pressure: 116-14 PSI • Min. Height: 7.09", Max. Height: 18.89" • Weight: 170 Lbs. MADE IN ITALY MADE IN ITALY 3 Stage 66/33/17-Ton Air Hy ASCOT NO. MFG. NO. DESCRIPTION 302-92004 92004 44/22-Ton Air/Hydraulic HD Jack ASCOT NO. MFG. NO. DESCRIP 302-92010 92010 4 Stage 88/55/28/17-Ton Air/Hydraulic Jack

135 LIFTING EQUIPMENT SERVICE JACKS HIGH TONNAGE JACKS • Load blocking system • Remote control for working safely • Various extensions to suit all operations • All models are hydro-pneumatically operated and equipped with a dual descent valve for greater control when bearing weight and automatic piston return • Can also be fitted with a manual emergency pump (on request) • Made in Italy 165 TON MAMMUT JACK •100% Made in Italy • Comes complete with a 16' remote control pendant • Min height - 35.5" • Max height - 57.2" • Accessories sold separately LOAD BLOCKING SYSTEM 308-91005 REMOTE CONTROL DUAL DESCENT VALVE ASCOT NO. 308-91005 CAP. MFG. NO. 91005 (TONS) DESCRIPTION 165 165 Ton Mammut Jack HIGH TONNAGE JUMBO JACKS 302-91000 • Ideal for giant tire changing, mining, railroads, construction rigging • No need for cribbing - time savings! • Balanced for easy moving • Large pneumatic wheels • Only 23" wide, the jacks fit in tight spots • 50" long, 8 position handle for easy tilt back and moving of the jack • Welded fully enclosed heavy-duty steel frame with built in lifting holes • Hydraulic radial piston pump • Minimum 90 to 150 psi air supply needed to power hydraulic pump • Extension holders bolted to frame for easy storage • Easy to change oil filter • All Jacks come with 5" & 9" extentions & 1" saddle • Made in Canada ASCOT NO. MFG. NO. 302-91000 302-91001 302-91003 302-91004 302-91005 91000 91001 91003 91004 91005 DESCRIPTION High Tonnage Jack High TonnageJack High Tonnage Jack High Tonnage Jack High Tonnage Jack CAPACITY 25/50/80-Ton Stages 30/60-Ton Stages 50/80-Ton Stages 100-Ton 150-Ton ASCOT NO. 308-10321 308-10322 308-10323 308-10324 CAP. MFG. NO. 10321 10322 10323 10324 (TONS) 150 100 200 250 COLLAPSED POINT 36" 27" 27" 27" STROKE 22-3/8" 14-3/8" 14-1/2" 14" LIFTING HEIGHT 58-3/8” 41-3/8” 41-1/2" 41"

PROFESSIONAL JACKS STANDS LIFTING EQUIPMENT JACK STANDS ASCOT 3, 6 & 12-TON JACK STANDS • Heavy-duty jack stands that are suitable for emergency tire changes, repairs and more • Ratchet height adjustment built within column • Wide base for added stability • Multi-leveled ductile iron ratchet bar adds strength and durability • Sold in pairs of two NOW FEATURING A DOUBLE LOCK SAFETY PIN FOR ADDED SECURITY 136 302-63030 302-63060 22-TON JACK STANDS • Sturdy, welded steel construction for exceptional safety and strength • Heavy gauge steel helps prevent distortion or twisting • Multi-position column bar for convenient height adjustment • Sold in pairs of two • Now featuring A DOUBLE LOCK SAFETY PIN FOR ADDED SECURITY 302-05622 302-63120 10-TON HIGH JACK STANDS (PAIR) • Pin-style stands with supporting range fr suitable for high-height applications • Hea design provides stability and rigidity • Multiple pin holes t allow easy adjustment to desired height • S easy positioning of the load • Sold and to be used only in pair ASCOT REBRAND COMING SOON! Ascot No. 302-05622 Mfg. No. 3190 Description 22-Ton Jack Stands JACK STAND SPECIFICATIONS ASCOT NO. 302-63030 302-63060 302-63120 302-05622 302-51005 MFG. NO. 63030 63060 63120 3290 510005 CAPACITY (TONS) 3-Ton 6-Ton 12-Ton 22-Ton 10-Ton BASE SIZE 7-5/8" x 6-7/8" 11" x 9-3/4" 11-3/4" x 10-5/8" 9-7/8" x 9-7/8" 16-7/32" x 16-7/32" MIN. HEIGHT / MAX. HEIGHT 11" / 16-3/8" 15-3/4" / 24-3/8" 17-1/2" / 27-1/2" 13-3/8" / 19-5/8" 27-61/64" / 47-9/16" SHIPPING WEIGHT 14.9 lb. 32 lb. 56 lb. 63.3 lb. 123.2 lb.

137 LIFTING EQUIPMENT JACK STANDS ® PROFESSIONAL LIFTING EQUIPMENT 302-81208 NORCO JACK STANDS • Unique spring loaded pawl provides constant locking pressure against lifting column when raising the column to the load - the benefit is that it makes it a one-handed operation • Four legged base with foot pads for added strength and more secure footing • Common machine bolt secures lifting column to stand and provides stability • Recessed column saddle for acceptance of vehicle panel rail • Design qualification tested to 200% of rated capacity • Capacity is per pair SECURE FOOTING 302-81208 302-81209 302-81210 ASCOT NO. 302-81205 302-81208 302-81209 302-81210 302-81225 302-82205 302-82208 302-82209 302-82210 MFG. NO. 81205 81208 81209 81210 81225 81205i 81208i 81209i 81210i CAP. (TONS) 5 10 10 10 25 5 10 10 10 MIN. HGT. / MAX. HGT. 9-1/2" / 15-3/4" 10-1/2" / 17" 18-1/2" / 30" 28" / 47" 12" / 20" IMPORT 9-1/2" / 15-3/4" 10-1/2" / 17" 18-1/2" / 30" 28" / 47" 3" x 2" 4" x 1-1/2" 7" x 1-1/2" 10" x 2" 3" x 4-1/2" 3" x 5" 3" x 5" 3" x 5" 9" x 9" 12-1/2" x 12-1/2" 17" x 17" 16" x 16" 38 60 80 106 HEIGHT INTERVALS SADDLE SIZE DOMESTIC 3" x 2" 4" x 1-1/2" 7" x 1-1/2" 10" x 2" 3" x 3" 3" x 4-1/2" 3" x 5" 3" x 5" 3" x 5" 2-1/4" x 3-1/4" 9" x 9" 12-1/2" x 12-1/2" 17" x 17" 16" x 16" 10" x 10" 38 60 80 106 65 BASE SIZE WT./PR (LB.)

LIFTING EQUIPMENT JACK STANDS 22-TON HEAVY DUTY JACK STANDS • Sturdy, welded steel construction for superior safety and strength • Heavy gauge steel frame prevents distortion or twisting • Sold in Pairs 12-TON JACK STAND WITH PIN AND WHEELS • These Winntec Jack S have a welded steel cons for superior safety and s Nylon wheels and a remo handle ensure quick and safe positioning under mos vehicles • Sold as a set of 2 138 302-14400 ASCOT NO. MFG. NO. CAP. (TONS) MIN. HGT. / MAX. HGT. WT. (LB.) 302-14400 14400 22 12" / 20" 68 22-TON HEAVY DUTY JACK STANDS • Sturdy, welded steel construction for superior safety and strength • Heavy gauge steel frame prevents distortion or twisting • Sold in Pairs 302-45125 302-14401 ASCOT NO. MFG. NO. CAP. (TONS) MIN. HGT. / MAX. HGT. WT. (LB.) 302-14401 14401 22 12" / 20" 68 CAP. ASCOT NO. MFG. NO. 302-45125 G451205 (TONS) MIN. HGT. / MAX. HGT. 11.8" / 17.7" 12 WT. (LB.) 44

139 LIFTING EQUIPMENT JACK STANDS 20-TON SCREW STYLE JACK STAND • Screw-style stand makes it easy to hold load at desired height and secure with locking collar • Adjustable screw for height extension and retraction • Heavy duty design and application SCREW STYLE CAP. ASCOT NO. MFG. NO. 302-10802 302-10803 10802 10803 (TONS) 20 20 MIN. HGT. / MAX. HGT. 16.5" x 26.5" 26" x 46" COMING FALL 2026 302-63200 BASE THICKNESS BASE SIZE 1/4" 1/4" 13" x 13" 13" x 13" WT. (LB.) 65 82 CAP. ASCOT NO. MFG. NO. (TONS) 302-63200 ASM2825 20 MIN. HGT. / MAX. HGT. 16- 1/8" x 23-3/4" HEAVY DUTY JACK STANDS 25-TON CAPACITY JACK STANDS • Intended for fleet and maintenance garages where low profile stands are used to support loaded trailers • Pin-type support column adjusts to four different height positions • Adjustment pin is secured to stand to preven loss • Handle provides ease of positioning and carrying • 3/8” thick solid steel base plate for stability • Sturdy, welded steel construction for superior safety and strength • Heavy gauge, steel frame helps prevent distortion or twisting SADDLE SIZE 5-1/8"x 3-7/8" BASE SIZE 13" x 13" WT. (LB.) 65.8 302-10803 20-TON SCREW STYLE LOCKING JACK STAND • Screw-style stand makes it easy to hold load at desired height and secure with locking collar • Heavy gauge, steel frame helps prevent distortion or twisting • Sold as each USA & HEA GA S FR IMPORTED MODELS AVAILABLE 302-81225 30 ASCOT NO. MFG. NO. CAP. DESC. 302-81225 81225 US (TONS) 25 302-82225 81225i Import 25 MIN. HGT. / MAX. HGT. HEIGHT INTERVALS 12" / 20" 3" x 3" 12" / 20" 3" x 3" SADDLE SIZE 2-1/4" x 3-1/4" 2-1/4" x 3-1/4" BASE SIZE 10" x 10" 10" x 10" WT. (LB.) 65 65 ASCOT NO. MFG. NO. CAP. (TONS) MIN. HGT. / MAX. HGT. 302-14410 302-14415 14410 14415 20 20 18.5" x 26.7" 18.5" x 26.7" 302-14410

® LIFTING EQUIPMENT AIR 302-81022 PROFESSIONAL LIFTING EQUIPMENT 302-81050 20 & 50-TON CAPACITY TRAILER STABILIZING STANDS • NEW! Now comes with wheels that allow for easier positioning under the load • Meets OSHA requirements for supporting trailers when loaded or unloaded • 14" diamet base provides maximum leveling stability • Quick adjust spin handle for ease of turning • Large diamond plate saddle to grip the load LIFT JACKS 10-TON CAPACITY AIR LIFT JACK • Designed for use in truck and farm equipment dealer garages, heavy duty onstruction repair shops and bus ompany garages • Three-way heavy duty air valve provides fine ontrol when lifting or lowering a vehicle • Automatic safety lock engages in six different height positions independent of air pressure • Designed for lifting entire front or rear of a vehicle • Front swivel caster wheel and two 12-1/4" diameter pneumatic ear tires provide easy maneuverability • Adjustable lifting saddles can be aised and extended to desired position 140 3-WAY HEAVY DUTY AIR VALVE ASCOT NO. MFG. NO. 302-81022 81022A 81050 CAP. DESC. US 302-81122 81022Ai Import 302-81050 - (TONS) 20 50 MIN. HGT. / MAX. HGT. BASE SIZE SADDLE SIZE 39" / 50-5/8” 14" Diameter 4-1/2" x 5" 20 39" / 50-5/8" 14" Diameter 4-1/2" x 5" 39" / 51" 14" Diameter 8" Dia. WT. (LB.) ADJUSTABLE LIFTING 52 52 152 ASCOT NO. MFG. NO. 308-82999 10 AND 15-TON CAPACITY PORTABLE AIR LIFT JACKS • Designed for use in garages/repair shops of truck, farm equipment, construction equipment and bus companies • Ideal for crowded conditions that require single point contact • Three-way heavy duty air valve provides fine control when lifting or lowering a load • Extension tubes and detent pins offer multiple lifting heights • Unit easily maneuvered on two 8” diameter rubber tread wheels • Removable handle and 8’ air hose for remote safe positioning and operation • Lifting saddle with serrated surface and locating lugs • May be used in pairs 3-WAY HEAVY DUTY AIR VALVE SADDLES 308-82999 CAP. (TONS) 82999 10 MIN. HGT. /MAX. HGT. 12-1/2" / 50" MIN. PSI FOR RATED LOAD 200 WT. (LB.) 638 ASCOT NO. 308-82992 MFG. NO. 82992 CAP. (TONS) 308-82990 82990C 10 15 MIN. HGT. / MAX. HGT. 17-3/4" / 49-3/8" 18-1/8" / 51-3/8" OVERALL LENGTH 58" 59-1/2" OVER WIDTH 13-5/8" 15" HEIGHT STROKE 17-3/4" 11-1/2" 18-1/8" 11-1/4" (LB.) 178 279

CH-5 Cheetah VP-18 Viper Available in 5, 10, 13 Gallon Available in 11.5, 13, 18 Liter STE-M Siper 405W Porta Truer TC-55 Tire Cutter www.buytsi.com

LIFTING EQUIPMENT ® PROFESSIONAL LIFTING EQUIPMENT TRANSMISSION JACK & FUEL TANK REMOVER ADAPTERS • Allows for a safer and quicker removal of transmissions that are not flat on the bottom • Adapters fit transmission jacks 72050E, 72500E and 72550B 1/2-TON CAPACITY UNDER HOIST TRANSMISSION JACKS • Fully adjustable universal saddle with adjustable corner brackets and safety chain • Safety overload system prevents jack from being used beyond rated capacity • Foot operated pump and lowering pedals • Two-stage flash chromed rams inhibit rust from entering hydraulic system • 371-72550B same as 371-72500E but lifts the load twice as fast with it’s US Patented FASTJACK mechanism • Norco manufactures over 20 vehicle and service specific adapters to enhance the capabilities of their transmission jacks • Made in Taiwan SPECIALTY JACKS 142 309-72533 UNIVERSAL SADDLE 371-72450 309-72508 FITS 72050E, 72500E & 72550B 309-72525 ASCOT NO. MFG. NO. DESCRIPTION 309-72501 72501B 309-72502 309-72504 309-72505 309-72506 309-72507 309-72508 309-72517 309-72525 309-72533 72502B Adapter for use on GMC 4-Wheel Drive Transmission Case. WEIGHT: 18 lb. Adapter for use on 4 and 5 Speed Truck Transmissions. WEIGHT: 13 lb. 72504B Adapter for use on GMC Front Wheel Drive Transmissions. WEIGHT: 24 lb. 72505B Adapter for use on GMC Front Wheel Drive Transmissions (X, J and A Bodies) 3T40. WEIGHT: 15 lb. 72506B Adapter for use on GMC 440 Metric Transmissions 4T60-E. WEIGHT: 11-1/2 lb. 72507A 72508 72507B 72525 72533 Adapter for use on Ford 640E & 4R100 (4WD) Truck & Van Transmissions Fuel Tank Adapter Adapter for use on Ford E40D Truck Transmissions. WEIGHT: 34 lb. Optional saddle that replaces the four Adjustable Corner Brackets found on Standard and Universal Saddles This tool will allow for the safe and secure removal and installation of DPFs, Drive Shafts, and automotive transmissions up to 750lb. The bean bag eliminates the need for individual DPF transmission adapters. ASCOT NO. MFG. NO. CAP. (TONS) 1/2 1/2 1/2 371-72450 371-72501 371-72550 72450B 72500E 72550B MIN. HGT. / MAX. HGT. 36" / 75" 35" / 72" 35" / 72" WT. (LB.) 175 176 178

143 LIFTING EQUIPMENT SPECIALTY JACKS 1-TON CAPACIT HYDRAULIC TRANSMISSION JACK • Designed for the remo installation and transporta (in the lowered position) of heavy duty truck transmis that are raised by an abo ground lift • Air/hydraulic f pump for hands free oper • Fully adjustable univer saddle with adjustable arms • Heavy duty chain with chain tensioner to secure load t saddle • Made in Taiwan ® PROFESSIONAL LIFTING EQUIPMENT 1-1/2-TON CAPACITY TRUCK TRANSMISSION JACKS • For heavy truck transmissions • Fully adjustable universal saddle with adjustable arms to position the transmission • Heavy duty chain with convenient chain tensioner secures load to saddle • Safety bypass system prevents damage to the hydraulic cylinder • Norco manufactures over 20 vehicle and service specific adapters to enhance the capabilities of their transmission jacks ASCOT NO. 371-72701 MFG. NO. 72701A CAP. (TONS) 1 MIN. HGT. / MAX. HGT. 41-1/4" / 69-3/8” WT. (LB.) ASCOT NO. 273 371-72000 72000E 2,500 LBS. CAPACITY POWERTRAIN LIFT/TABLE • An air/hydraulic foot pump includes a metered valve for safe lowering of the load • Safety overload system in the air/ hydraulic pump prevents jack from being used beyond the load-limiting standard • Five foot extension hose with quick disconnect fittings stores in the lift base. The foot pump can be removed from its holder and hydraulic hose quickly and easily extended by 5’ using the extension hose. This provides hands free operation of the pump anywhere around the lift’s perimeter • Scissors lift design provides easy 360˚ access to any component • Two heavy duty ratchet tie-downs are included to safely secure the load on the lift table • Table top height from 31” to 77-3/4” (with wood saddles) or 27.5” to 74-1/4” (base plate only) • Four 8” diameter swivel caster wheels for easy maneuverability. Rear wheels can be locked to prevent the lift from rolling ASCOT NO. 371-72850 MFG. NO. 72850A MIN. HGT. / MAX. HGT. 31" / 78" WT. (LB.) 665 Lbs. ASCOT NO. MFG. NO. 302-72036 72036D MF NO. 72000Ei 4-TON CAP FORKLIFT J • Two-position saddle a rotated to handle either edges or fla a load • 2-1/4" lo removable handle f when not in use • Our “ knob provides slo load • Safety bypas cylinder damage and pr used beyond the A CAP. (TONS) 4 MIN. HGT. / MAX. HGT. 2-1/4" / 16-1/4" OVERALL LENGTH 26-1/8" OVERALL WIDTH 8-3/4" WT. (LB.) 75

LIFTING EQUIPMENT PROFESSIONAL JACKS 1/2-TON TWO STAGE TELESCOPIC JACK STAND • Foot pedals allow hands free operation • Overload valve prevents jack from being used beyond its rated capacity • Speed limiting valve ensures an automatic safe speed descent - not greater than 1" per second • "Hidden" hydraulic double pump system provides FAST lifting - under no load the jack can reach maximum height in 35 pumps • The cover on the pump system helps keep dust and dirt out of the hydraulics for longer life • Deluxe saddle with 2 angle adjustments - fore/aft and side to side - for maximum user flexibility • Includes a 59” tie down chain to secure the load • Chrome plated piston rod and pump core for longer service life • The grease fitting at the ram nut allows easy lubrication of the shafts • 4" steel swivel casters provide effortless maneuvering through the shop, 2 standard and 2 with locking mechanisms SPECIALTY JACKS 1-TON TWO STAGE TELESCOPIC JACK STAND • Foot activated raising and lowering pedals allow hands-free operation • HJ0505 Deluxe saddle with 2 angle adjustments - fore/aft and side to side - for maximum user flexibility. Includes a 59” tie down chain to secure the load • Heavyduty 4” steel swivel casters provide effortless maneuvering through the shop, 2 standard and 2 with locking mechanism • Strong square tube base with reinforcement rods provides exceptional strength and stabilit • Heavy steel construction formaximum durability • Welded ram nut allows removal of the seal at joint eliminating the possibility of future leakage • Meets or exceeds ASME PASE-2024 Standard 144 371-03321 371-03332 SPECIFICATIONS Ascot No. Mfg. No. 371-03321 HJ3321 Description 1/2-Ton Two-Stage Telescopic Transmission Jack Min. Hgt. Max Hgt. Saddle Tilt Forward/ Backward 37" 76-3/8" 29 °/10 ° Saddle Tilt Left/Right 27.2°/46.8 ° Ship Wt. (Lbs) 158.4 lbs SPECIFICATIONS Ascot No. Mfg. No. 371-03332 Min. Hgt. HJ3332A-B Description 1-Ton Two-Stage Telescopic Transmission Jack Max Hgt. Saddle Tilt Forward/ Backward 37"-9/16" 76-3/8" 29°/10 ° Saddle Tilt Left/Right 27.2°/46.8 ° Ship Wt. (Lbs) 185 lbs

145 LIFTING EQUIPMENT WHEEL DOLLIES 2,000 LB. HEAVY DUTY 3-IN-1 CAR DOLLY SET • HOLDS VEHICLE: By the wheel, by the pinch weld and by the frame • No adapters required • Integrated frame adapters • Locking casters • No tools required • Adapter secured with pins • Self-stacking • Allows convenient storage • Sold in pairs of two GAITHER TRAC TIRE JACK • Simple design that drastically helps technicians when mounting and demounting heavy wheel assemblies to and from a vehicle's hub • The TRAC Tire Jack simply slides under the tire and wheel and allows the technician to roll the wheel into place • Through the use of leverage, the TRAC Tire Jack saves users time and their backs • Use the Jack and not your back • Heavy-duty welded steel construction offers extreme durability • Steel base roller offers tire support and rolling convenience 407-47020 309-48501 ASCOT NO. MFG. NO. DESCRIPTION 309-48501 GTJ-01 Gaither TRAC Tire Jack ASCOT NO. MFG. NO. DESCRIPTION 407-47020 47020 3/4-TON WHEEL DOLLY • Hydraulic system actuated to provide smooth, positive power for the removal and installation of single, tandem, and duplex tires and wheels • Load restraining chain for security 2,000 LB Heavy Duty 3-IN-1 Car Dolly Set ROLLER PLATE FOR GAITHER TRAC TIRE JACK • When used with the Gaither TRAC tire jack, the roller plate allows for an easier alignment of the holes of the wheels to the studs of the hub • Heavy-duty welded steel construction offers extreme durability • Dimensions: 8” x 5” x 1.25” • Weight: 2 lbs. ROLLER PLATE IN USE 407-47053 309-48511 ASCOT NO. MFG. NO. 407-47053 47053 CAP. TILT (TONS) LIFT RANGE RANGE 3/4 LIFT ARM SIZE 2-1/4" - 11" (-)2 - 5° 25-7/8" x 25-1/4" PRODUCT SIZE (W X D X H) 43-1/2" x 43" x 34-7/8" WT. (LB.) 151 ASCOT NO. MFG. NO. DESCRIPTION 309-48511 GTRP-01 Roller Plate For Gaither Trac Tire Jack

LIFTING EQUIPMENT WHEEL DOLLIES ® PROFESSIONAL LIFTING EQUIPMENT WHEEL DOLLY FOR AGRICULTURAL AND EARTH MOVING MACHINERY • Easy and safe mounting, demounting and handling of large wheels on agricultural and earth moving machinery • Capable of handling large wheels from 45.3" up to 84.7" in diameter and up to 41.3" in depth • CAPACITY: 3,306 lbs • Double acting hydraulic system • Handsfree switch between lifting and lowering action • Safe and controlled lowering • 2 x 4 large rollers improve handling of tires with deep treads • Top-point wheel connection rod keeps the wheel in safe balance 200 LB. CAPACITY SINGLE TIRE LIFTER • To safely assist a technician with the removal and installation of single wheels on vehicles that are supported on a lift • Maneuverability is made easy by means of four swivel caster wheels • Two rear caster wheels include a locking mechanism which can prevent the dolly from moving • Unique offset design offers open access from the rear to mount wheel to the vehicle • Onboard rollers make for easy stud-to-hole alignment • Air-operated controls allows the unit to lift the load effortlessly • 4" low height of support legs 146 FOUR SWIVEL CASTER WHEELS AIROPERATED CONTROLS 407-82306 EASY AND SAFE FOUR LARGE ROLLERS The Wheel Dolly for Agricultural and Earth Moving Machinery makes possible easy and safe mounting, demounting and handling of large wheels. ASCOT NO. MFG. NO. 407-90538 90538 DESCRIPTION Wheel Dolly for Agricultural and Earth Moving Machinery ASCOT NO. 407-82306 MFG. NO. 82306 CAP. (LB.) 200 LIFT TRAVEL MIN. HGT. / MAX. HGT. WIDTH LENGTH 35-1/8" 4" / 39-1/8" 9" - 22" 17-1/2" - 33-1/4" WT. (LB.) 210

147 LIFTING EQUIPMENT SPECIALTY JACK STANDS 2-TON UNDERHOIST TRIPOD JACK STAND • Capacity: 2-Ton • Underhoist stand is perfect for use with 2 or 4-post lifts, prevents tipping or rocking of the vehicle • Heavy gauge steel frame prevents distortion or twisting • Saddle comes with a removable rubber cover to protect load PROFESSIONAL LIFTING 1500 LB. HIGH REACH JACK STAND • Capacity: 1500 LB • Underhoist stand is perfect for use with 2 or 4-post lifts, prevents tipping or rocking of the vehicle • Heavy gauge steel frame prevents distortion or twisting • Comes with a 12" base for stability • Saddle comes with a removable saddle rubber cover to protect vehicle components 302-02811 302-02812 SPECIFICATIONS Ascot No. Mfg. No. 302-02812 2812 Description SPECIFICATIONS Ascot No. Mfg. No. 2-Ton Underhoist Tripod Jack Stand Min. Hgt. Max Hgt. Base Size 48-7/16" 83-1/16" 24-7/16" x 21-1/4" Saddle Size Ship Wt. (Lbs) 5-7/16 x 1-9/16" 35.5 lbs 302-02811 Min. Hgt. 54-3/4" 2811 Max Hgt. 81-1/8" Description 1500 LB. High Reach Jack Stand Base Size 12" Saddle Size Ship Wt. (Lbs) 5-3/4" x 2-3/4" 28.6 lbs

LIFTING EQUIPMENT SPECIALTY JACK STANDS PROFESSIONAL LIFTING 1500 LB. HIGH REACH JACK STAND W/ FOOT PEDAL • Capacity: 1500 LB • Underhoist stand is perfect for use with 2 or 4-post lifts, prevents tipping or rocking of the vehicle • Heavy gauge steel frame prevents distortion or twisting • Comes with a 12" base for stability • Saddle comes with a removable saddle rubber cover to protect vehicle components • Equipped with a foot pedal that allows easy load movement ® PROFESSIONAL LIFTING EQUIPMENT 3/4 & 1-1/2-TON UNDER TRAILER HOIST STANDS • Lightweight, slender design • Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning load • Foot pedal (81034A only) generates 1" additional stroke and 400 lb. of force at the saddle • Pedal may be locked in vertical position for storage or shipment 1-1/4" diameter acme threaded screw has 26-1/4” travel 148 302-28112 302-81034 302-81035 SPECIFICATIONS Ascot No. Mfg. No. 302-28112 Ascot No. 2811B Description 1500 LB. High Reach Jack Stand W/ Foot Pedal 302-81034 Min. Hgt. Max Hgt. Base Size Saddle Size Ship Wt. (Lbs) 302-28112 54-3/4" 81-1/8" 12" 5-3/4" x 2-3/4" 30.8lbs 302-81035 81034A 3/4 81035A 1-1/2 ASCOT NO. 302-81033 MFG. NO. 81033A CAP. (TONS) 3/4 MIN. HGT. / MAX. HGT. BASE SIZE 55-1/4" / 81-1/2” 55-1/4" / 81-1/2” 48-7/8" / 85-3/8” SADDLE SIZE 12" Diameter 1-5/8" x 5-1/4" 12" Diameter 1-5/8" x 5-1/4" 12" Diameter 3-1/4" x 3-1/4" WT. (LB.) 35 39 39.5

149 LIFTING EQUIPMENT JACK OILS MAXXIMUM PERFORMANCE ANTI-WEAR HYDRAULIC OILS • Maxximum Performance Anti-wear Hydraulic Oils exhibit outstanding wear protection • long service life • excellent rust and corrosion protection, outstanding thermal stability• exceptional resistance to sludge formation ASCOT PREMIUM HYDRAULIC JACK OIL-QUARTS • 12 bottles per case • Designed for year-round use in a wide array of temperatures • Outstanding anti-wear properties • Rust and corrosion resistant • Excellent foam suppression • Promotes long equipment life • Exceptional oxidation stability • Made in USA ASCOT NO. MFG. NO. 309-01450 309-14404 309-11450 DESCRIPTION 309-04404 07722004404 AW 46 Maxximum Performance Anti-Wear Hydraulic Oils 1 Gal 07722001450 AW 46 Maxximum Performance Anti-Wear Hydraulic Oils 5 Gal 07721004404 AW 32 Maxximum Performance Anti-Wear Hydraulic Oils 1 Gal 07721001450 MAXXIMUM PERFORMANCE SYNTHETIC GEAR OILS • Heavy-duty, extreme pressure, GL-5 synthetic gear lubricants • Engineered with state-of-the-art advanced additive chemistry which includes extreme pressure, rust, oxidation and corrosion inhibitors • Designed to provide supreme protection of gears and bearings operating under a wide variety of load conditions and temperatures. ASCOT NO. MFG. NO. 309-01201 309-04201 309-01201 309-01201 DESCRIPTION 05550001201 05520004201 05522001201 05517001201 75W-85 Full Synthetic 12x1 Yorker Quart Case 75W-90 12x1 Yorker Quart Case 75W140 12x1 Yorker Quart Case 80W-90 12x 1 Yorker Quart Case ASCOT NO. MFG. NO. 309-93291 309-93294 HW93291 HW93294 DESCRIPTION 1 Quart 1 Gallon AW 32 Maxximum Performance Anti-Wear Hydraulic Oils 5 Gal ASCOT NO. MFG. NO. N/A 309-10925 DESCRIPTION Ascot Premium Hydraulic Jack Oil - Quarts HYDRAULIC JACK OIL

® LIFTING EQUIPMENT SHOP PROFESSIONAL LIFTING EQUIPMENT CRANES 2 AND 3-TON CAPACITY SHOP CRANES • Designed to raise, lower and transport engines, transmissions, differentials and other heavy loads with minimal effort • Four adjustable legs provide greater stability • 1/2 and 2-ton are boom retracted • 3-ton available in either air/hydraulic or electro/hydraulic • ASSEMBLED IN THE USA ASCOT NO. MFG. NO. 331-78106 OPERATING SYSTEM 78106A Manual 331-78600 78600B Air/ Hydraulic 331-78605 78605A Electro/ Hydraulic BOOM CAP. @ LENGTH 2-Ton @ 44-3/4" 3-Ton @ 65" 2-1/2-Ton @ 81" BOOM MIN. 0" BOOM MAX. 88" LEG EXTENSION 83-1/2" 13" 149-1/2" 49", 65", 81" 13" 149-1/2" 49", 65", 81" OVERALL SIZE (W X L X H) 74-1/2" X 51-3/4" X 70-3/4" 75" X 51" X 90-1/2" 75" X 51" X 90-1/2" WEIGHT (LB.) 320 1,150 1,182 331-78106 150 1,250 LBS. CAPACITY 75:1 GEAR-DRIVEN ENGINE STAND • 75:1 ratio gearbox activated by hand crank easily turns the 360 degree rotating head to the desired work position • Meets the ASME PASE performance and safety standards • Fully adjustable engine mounting head • Two rigid rear wheels. One of the two front swivel casters has a lock for maximum stability and support • Polyurethane wheels provide protection for expensive tile and epoxy floors • Telescopic base locks into any one of four different positions to extend the length of the stand for added stability when required. ASCOT NO. MFG. NO. 331-78155 78155 DESCRIPTION 1,250 LBS. Capacity 75:1 Gear-Driven Engine Stand 2,000 LBS. CAPACITY 75:1 GEAR-DRIVEN ENGINE STAND • 75:1 ratio gearbox activated by hand crank easily turns the 360 degree rotating head to the desired work position • Meets the ASME PASE performance and safety standards • Two rigid rear wheels. One of the two front swivel casters has a lock for maximum stability and support • Polyurethane wheels provide protection for expensive tile and epoxy floors • Includes two universal mounting plates, rotating shaft, eight fully adjustable arms and all the related mounting hardware • Rotating shaft with mounting plate telescopes inside the post receiver for fine adjustment when mounting ends or sides of engines • Mounting plates can be adjusted 36-1/4” apart ASCOT NO. MFG. NO. 331-78155 78155 DESCRIPTION 1,250 LBS. Capacity 75:1 Gear-Driven Engine Stand

151 LIFTING EQUIPMENT ® BRAKE COMPONENT HANDLERS DISC BRAKE HUB REMOVAL / INSTALLER / HANDLER • Replace rotor, seals and bearings with no heavy lifting • Reduc injuries by preventing back and hand injuries • Four polyurethane c wheels to protect epox enhancing smooth maneuv through the shop (two c with locks) • Works on disc br for all Class 8 trucks, tr and school buses • Attachmen the hub is made easy b vehicle lug nuts • Quickly r the load to working heigh using either air or battery t • 14-1/4" range of opera BRAKE DRUM HANDLER • Handles 15" and 16-1/2" drums • Ball bearing wheels, semi-pneumatic tires and 3/4" diameter axle provide easy maneuverability and balance PROFESSIONAL LIFTING EQUIPMENT 407-72040 ASCOT NO. MFG. NO. 407-72045 72045 LOW LIFT HEIGHT 11-1/2" HIGH LIFT HEIGHT 25-3/4" OVERALL SIZE 24" x 31" x 35-34" WT. (LB.) 60 ASCOT NO. MFG. NO. 407-72040 LOW LIFT HEIGHT 72040B 10-1/4" HIGH LIFT HEIGHT 15-1/4" OVERALL SIZE 21" / 62-1/2” WHEEL DIAMETER 8" WT. (LB.) 64 BACK BUDDY II • The Back Buddy II™ rolls under and bolts onto heavy drum and hub assembly, then handily rolls the assembly out and lays it over for servicing • Re-assembly is quick and precise because the Back Buddy II™ angles for perfect hub alignment, eliminating seal damage and costly fixes • The Back Buddy II™ handles all hub and drum assemblies with Universal Receiver and Adapter Sets • Adapters 6069 and 6073 10-hole inboard and outboard application are included • Other wheel adapters sold separately ASCOT NO. MFG. NO. DESCRIPTION 407-00350 350B 407-00350 Back Buddy II

LIFTING EQUIPMENT ALUMINUM RAMS 100-TON ALUMINUM RAMS • Lightweight yet durable • The preferred jack for road service • Includes "Shut-Off Valve" to allow the pump to be removed while ram is extended 100-TON HD LIGHTWEIGHT HYDRAULIC JACK • Lightweight yet durable • For use with 10,000 PSI pumps • Ships completely assembled with valve and coupler 318-13000 PERFECT FOR OFFHIGHWAY WORK 318-13155 CAP. CAP. ASCOT NO. MFG. NO. 318-13000 318-13155 13000 13155 (TONS) STROKE 100 100 6" 6" MIN. HEIGHT 12" 15.6" MAX. HEIGHT 18" 21.5" WEIGHT (LBS.) 53 58 55-TON ALUMINUM RAMS • Lightweight aluminum for easy handling and placement under the vehicle • Includes "Shut-Off Valve" which allows the pump to be removed while the ram is extended ASCOT NO. MFG. NO. 318-10300 10300 100 (TONS) STROKE 6" MIN. HEIGHT 11.75" MAX. HEIGHT 17.75" 55-TON HYDRAULIC JACKS - ALUMINUM • Lightweight Aluminum constructed Hydraulic Cylinder • For use with 10,000 psi pumps • Ships completely assembled with valve, coupler, and 8" x 8" base • Ideal for OTR, mining, agricultural and construction applications • Robust 11/16" cylinder wall for heavy-duty use WEIGHT (LBS.) 55 152 318-13081 318-13140 MIN. ASCOT NO. MFG. NO. CAP. (TONS) 318-13120 318-13154 318-13081 318-13140 318-13170 13120 13154 13081 13140 13170 55 55 55 55 55 STROKE 6" 6" 6" 10" 8" HEIGHT MAX. HEIGHT 12.25" 18.25" 13.2" 19.1" 12.25" 18.25" 16.25" 26.25" 21.5" 13.5" 318-13170 WEIGHT (LBS.) 29 26.2 24.5 29 31 CAP. ASCOT NO. MFG. NO. 318-10312 318-10314 10312 10314 (TONS) STROKE 6" 6" 55 55 MIN. HEIGHT 12" 16" MAX. HEIGHT 18" 26" WEIGHT (LBS.) 33 41 318-10312 318-10314

153 LIFTING EQUIPMENT HYDRAULIC RAMS HYDRAULIC RAMS • Used to push off rear rim flange and tire bead on earthmover wheels • For all earthmover tires, trucks and perfect for construction HYDRAULIC RAMS • The ESCO Hydraulic Rams are a staple for any Tire Dealer/ Technician that service Earthmover Tires • They are used to break the beads on the backside of the tire • In this c may make it difficult to use a bead breaker due to a limitation of space behind the wheel 422-13010 ASCOT NO. MFG. NO. CAP. (TONS) 422-13010 13010 10 422-13020 13020 10 422-13030 13030 10 422-13040 13040 10 422-13050 13050 10 422-13090 13090 25 422-13100 13100 25 422-13020 422-13030 COLLAPSED HEIGHT STROKE 4-3/4" 6-3/4" 9-3/4" 11-3/4" 13-3/4" 422-13060 13060 30 4-5/8" 12-3/4" 10" 2-1/8" 4" 6-1/8" 8" 10-1/8" 2-7/16" 8-1/4" 6-1/4" 422-13040 422-13050 422-10301 422-10302 CAP. ASCOT NO. MFG. NO. 422-10301 422-10302 422-10303 422-10304 422-10305 422-10306 10301 (TONS) 10 10302 10 10303 10 10304 10 10305 10 10306 30 422-10303 422-10304 COLLAPSED HEIGHT STROKE 4.75" 6.75" 9.75" 11.75" 13.75" 4.63" 2.13" 4.13" 6.13" 8" 10.13" 2.44" 422-10305 STEEL-A-STACK HYDRAULIC RAM KIT STAC-ABLE 10-TON HYDRAULIC RAM KIT • Versatile ram kit allows you to select your ram length from 3.5" (9 cm) up to 11.5" (29.21 cm) • Extensions can be used individually or together • Steel Extensions are durable enough for OTR applications • Extensions include 1" (2.5 cm), 2" (5 cm), and 3" (7.5 cm) options • 3" Extension includes a screw in saddle that extends another 2" • Ships in HD carrying case • 10 Ton 1.5" (3.8 cm) stroke 422-13075 422-10316 • Great for use in multiple applications in the tire/wheel service market and many more • Ideal for low clearance applications • Easy snap-in extensions • Made of high-quality steel • Most versatile 10 Ton Ram on the market – Easy to switch out extensions for optimal extension length • Includes Carrying Case ASCOT NO. MFG. NO. 422-13075 13075 DESCRIPTION Steel-A-Stack Hydraulic Ram Kit ASCOT NO. MFG. NO. 422-10316 10316 DESCRIPTION Stak-able 10-Ton Hydraulic Ram Kit

TIRE & WHEEL SERVICE Tire Lubricants & Sealants Markers Tire Branding Inserts Bead Breakers Hydraulic Pumps & Rams OTR Service Tools Cribbing Sets & Wheel Chocks Bead Seating Devices Chloride Pumps Mount/Demount Tools Hammers & Wedges Wrenches & Lug Wrenches Shop Service Tools Tire Inflation Systems Safety Inflation Cages LIFTING EQUIPMENT 154

155 TIRE & WHEEL SERVICE BREAST CANCER AWARENESS 432-02046 EACH PURCHASE OF THIS PRODUCT LEADS TO A DONATION TO THE SUSAN G. KOMEN FOUNDATION. ASCOT TIRE MOUNTING PINK PASTE 432-02067 • For use on all tires including low profile and run flat, and also safe for alloy wheels • No water, no mixing. Use right from the container • Extra slippery to help mount tires with stiff beads • Apply with brush • Makes tire mounting faster and easier • Manufactured by JTM Products • Formally Ascot White Paste ASCOT NO. 432-02046 432-02067 MFG. NO. 2046 2067 DESCRIPTION Ascot Pink Tire Mounting Paste, 8 lb. Pail (4 Per Case) Ascot Pink Tire Paste, 8lb. Low Profile Pail (4 Per Case) TIRE CHANGER BRACKETS FOR TIRE MOUNTING PASTE TIRE PASTE LUBRICATING BRUSHES • Manufactured from heavy duty steel • Mounts directly to a variety of different tire changers • Designed to hold tire paste buckets • Mounting hardware included • (2) self-tapping screws • (2) bolts • (4) washers • Made in Taiwan 432-12067 432-12046 437-04540 • For use with tire mounting paste • Allows you to properly lube the bead without wasting tire lube • Heavy duty wooden handle • Similar to 31 Inc. 14-713 • Made in China 437-04550 437-13014 MADE IN THE USA ASCOT NO. MFG. NO. 432-12046 432-12067 DESCRIPTION 2046B 2067B Bracket for Ascot White Tire Mounting Paste Bracket for Ascot Low Profile White Tire Mounting Paste ASCOT NO. MFG. NO. 437-04540 DESCRIPTION AS-045-040 437-04550 AS-045-050 437-13014 313014 Tire Paste Lubricating Brush – 1-1/2” Diameter Tire Paste Lubricating Brush – 2” Diameter Hunter-Style Tire Lubricating Brush

LIFTING EQUIPMENT TIRE LUBRICANTS & SEALANTS ASCOT TIRE AND TUBE MOUNTING COMPOUND • Versatile formula-dilutes to any strength your job requires • Approved by major tire companies world-wide • Made from natural, renewable resources • Totally safe for all tires • Economical when diluted • Ultra-thick concentrate for excellent performance when packing beads 432-02029 ASCOT NO. MFG. NO. 432-02028 432-02029 432-02035 2028 2029 2035 DESCRIPTION Tire/Tube Mounting Compound, 8 lb. Pail (4 per Case) Tire/Tube Mounting Compound, 25 lb. Pail Tire/Tube Mounting Compound, 40 lb. Pail ASCOT WHITE TIRE MOUNTING PASTE • Designed for alloy wheels, low profile and run flat tires • No water, no mixing. Use right from the container • Extra slippery to help mount tires with stiff beads • Apply with brush • Makes tire mounting faster and easier • Approved by major rubber companies • Ideal for lubricating bead seaters • For mounting and demounting tires 432-02088 ASCOT NO. MFG. NO. DESCRIPTION 432-02088 2088 BLACK RIM RUST RETARDANT & TIRE LUBE • Makes tire mounting and dismounting faster and easier • Now with rust inhibitor • Approved by major rubber companies • Lubricates all rubber parts, stops rubber squeaks Ascot White Tire Mounting Paste - 22 lb. Pail ASCOT LIQUID BEAD BUSTER • Multi-purpose shop tool which penetrates, lubricates, cleans, and protects most metal surfaces • Quickly dissolves and loosens rust, corrosion, and scale • Prevents broken parts • Non-flammable, non-combustible • Time saving tire bead breaker • Penetrates deep into tight spaces • Similar to SKID penetrating lubricant 431-00055 156 431-00001 431-00005 435-06002 ASCOT NO. MFG. NO. 435-06001 435-06008 435-06002 DESCRIPTION 065-2539 048-2539 025-2539 Black Rim Rust Retardant Tire Lube, 6 - 5 lb. Black Rim Rust Retardant Tire Lube, 4 - 8 lb. Black Rim Rust Retardant Tire Lube, 25 lb. ASCOT NO. MFG. NO. DESCRIPTION 431-00001 431-00005 431-00055 ASL-1 ASL-5 ASL-55 Liquid Bead Buster (4) 1-Gallon Bottles Liquid Bead Buster 5-Gallon Pail Liquid Bead Buster 55-Gallon Drum

157 TIRE & WHEEL SERVICE TIRE LUBRICANTS & SEALANTS MURPHY'S CONCENTRATED TIRE & TUBE MOUNTING COMPOUND • Versatile formula-dilutes to any strength your job requires • Approved by major tire companies world-wide • Made from natural, renewable resources • Totally safe for all tires • Economical when diluted • Ultrathick concentrate for excellent performance when packing beads 434-02110 MURPHY’S NON-RUST RIM-KOTE • Acts as tire mounting lubricant - prevents tire bead “freezing” • Contains no petroleum - prevents rim rust and scale • Great for seating tubeless bias, belted and radial tires • APPLICATIONS: Recommended for mounting tires on heavy duty trucks, buses and off-the-road vehicles ASCOT NO. MFG. NO. 434-02110 2110 NO RIM RUST 432-02005 ASCOT NO. MFG. NO. 432-02000 2000 432-02005 432-02008 432-02014 2005 2008 2014 DESCRIPTION Murphy's Concentrated Tire & Tube Mounting Compound, 8 lb. Pail (4 per Case) Murphy's Concentrated Tire & Tube Mounting Compound, 25 lb. Pail Murphy's Concentrated Tire & Tube Mounting Compound, 40 lb. Pail Murphy's Concentrated Tire & Tube Mounting Compound, 445 lb. Drum MURPHY’S WHITE TIRE MOUNTING PASTE • Designed for alloy wheels, low profile and run flat tires • Extra Slippery to help mount tires with stiff beads • No water, no mixing. Use right from the container • Contains rust inhibitor to help fight rim rust ASCOT NO. MFG. NO. DESCRIPTION 435-00015 435-00125 435-01120 FL4-1 FL25-1 FL120-1 No Rim Rust, 4-1/2 lb. Pail No Rim Rust, 25 lb. Pail No Rim Rust, 120 lb. Drum MISCELLANEOUS TIRE SWABS HELPS PREVENT CORROSION • Protects tires. Tire bead won’t fuse to rim • Helps prevent corrosion on rims and rigs • Helps you comply with OSHA Regulation 3086 DESCRIPTION Non-Rust Rim-Kote, 30 lb. Pail 435-00125 432-02167 432-02146 ASCOT NO. MFG. NO. DESCRIPTION 432-02146 432-02167 2146 2167 8 lb. Pail 8 lb. Pail (Low Profile) ASCOT NO. MFG. NO. 437-00001 437-00002 437-00003 TS-1 TS-2 TS-3 Tire Swab - 11" OAL X 2" Diameter Tire Swab - 15" OAL X 2" Diameter Tire Swab - 18" OAL X 3" Diameter DESCRIPTION 437-00001 437-00003 437-00002

TIRE & WHEEL SERVICE TIRE LUBRICANTS & SEALANTS PSX-75 OUTER PACK MOUNTING LUBRICANT CONCENTRATE • Gel-based mounting lubricant concentrate designed for dilution with 1 gallon of water • Formulated to provide controlled lubricity for tire and tube mounting • 3 oz. package to reduce storage space and shipping volumes • Corrosion inhibitors added to formula 432-10410 ASCOT NO. MFG. NO. 432-10410 F1.0410 DESCRIPTION PSX-75 Outer Pack Filled with 12 Inner Boxes (144 Packets) 437-00730 MURPHY'S LIQUID LUBRICANT • Designed to assist in mounting rubber tires and tubes on all types of wheels • Ready to use liquid for easy application • Easy clean up and non-toxic • Contains rush inhibitor to help fight rust 432-00740 ASCOT NO. MFG. NO. DESCRIPTION 433-02020 2020 433-02023 433-02022 2023 2022 Murphy's Liquid Lubricant, 1 Gallon (4 per Case) Murphy's Liquid Lubricant, 5 Gallons Murphy's Liquid Lubricant, 55 Gallons 433-02020 MURPHY'S CONCENTRATED EXTRA SLIPPERY LIQUID LUBRICANT • Contains improved super lubricity polymers • Rust inhibitor added to help fight rim rust • ECONOMICAL: Dilutes 2 to 1 • Formulated for super-fast mount of passenger tires ASCOT NO. MFG. NO. DESCRIPTION 433-01950 1950 Murphy's Concentrated Extra Slippery Liquid Lubricant, 1 Gallon (4 per Case) 433-01957 433-01958 1957 1958 Murphy's Concentrated Extra Slippery Liquid Lubricant, 5 Gallons Murphy's Concentrated Extra Slippery Liquid Lubricant, 55 Gallons 433-01950 ASCOT NO. MFG. NO. 432-12490 432-12492 2490 2492 DESCRIPTION OTR Mounting/Packing Compound, 25 lb. OTR Mounting/Packing Compound, 40 lb. ASCOT NO. MFG. NO. 432-00730 432-00731 432-00740 432-00750 432-01750 437-00001 437-00002 437-00003 73 73T 74 75 75N TS-1 TS-2 TS-3 432-00750 DESCRIPTION Mounting Paste Brush for Car/Light Truck Mounting Paste Brush for Trucks Universal Mounting Paste, 22 lb. High Profile Universal Mounting Paste, 7.7 lb. Low Profile Universal Mounting Paste, 7.7 lb. Swab - 11" OAL x 2" Diameter Swab - 15" OAL x 2" Diameter Swab - 18" OAL x 3" Diameter 432-01750 QTY./ BOX 1 1 1 1 1 1 1 1 UNIVERSAL MOUNTING PASTE • Makes mounting and demounting tires easier and faster and helps alleviate stress on and damage to the bead area of tires • Tire mounting paste applies with a sponge and will not corrode or discolor aluminum or alloy wheels, won’t freeze or harden • Rubber Lubricant is a liquid concentrate that makes one gallon of rust-inhibiting water-based mounting lubricant 158 OTR MOUNTING/ PACKING COMPOUND • Extra thick for Superior Bead Packing on OTR tires • Makes OTR Tire Mounting Faster and Easier • Will not separate or liquefy 432-12490

159 TIRE & WHEEL SERVICE TIRE LUBRICANTS & SEALANTS TIRE MOUNTING COMPOUNDS • Excellent Lubrication • Will not separate or liquefy • Superior for tire bead packing • Concentrated; water soluble, can be diluted CAN BE DILUTED LIQUID LUBE BLUE TIRE MOUNTING LIQUID • Excellent Lubrication • Superior “Tack” and Bead Sealing qualities • Reduces tire/ rim slippage • Concentrated; water soluble, can be diluted • Near neutral pH factor CAN BE DILUTED 432-12180 432-12280 ASCOT NO. MFG. NO. 432-12178 2178 432-12180 432-12183 432-12014 432-12278 432-12280 432-12282 432-12214 2180X 2183 2014 2278 2280 2282 2214 DESCRIPTION Tire Mounting Compound (Honey Color), 8 lb. (4 per Case) Tire Mounting Compound (Honey Color), 25 lb. Tire Mounting Compound (Honey Color), 40 lb. Tire Mounting Compound (Honey Color), 55 Gal. Tire Mounting Compound (Brown Color), 8 lb. (4 per Case) Tire Mounting Compound (Brown Color), 25 lb. Tire Mounting Compound (Brown Color), 40 lb. Tire Mounting Compound (Brown Color), 55 Gal. 433-81505 433-81511 ASCOT NO. MFG. NO. 433-81505 81505 433-81511 433-81515 BEAD BUTTER BLUE TIRE MOUNTING LIQUID LUBE • Excellent Lubrication • No Residue • Concentrated; water soluble, can be diluted 433-81555 81511 81515 81555 DESCRIPTION Liquid Lube Blue Tire Mounting Liquid, 2 Gal. (5 Gal. Mixing Pail) Liquid Lube Blue Tire Mounting Liquid, 1 Gal. (4 per Case) Liquid Lube Blue Tire Mounting Liquid, 5 Gal. Liquid Lube Blue Tire Mounting Liquid, 55 Gal. 433-81515 BLACK-ICE STOP RUST RIM RELEASE • Lubricates rim and tire for easy mounting & demounting • Protects against rust & corrosion • Prevents rim and bead from bonding CAN BE DILUTED PROTECTS AGAINST RUST 433-02054 ASCOT NO. MFG. NO. 433-02053 2053B 433-02054 433-02055 2054B 2055B DESCRIPTION Bead Butter Blue Tire Mounting Liquid Lube, 1 Gal. (4 per Case) Bead Butter Blue Tire Mounting Liquid Lube, 5 Gal. Bead Butter Blue Tire Mounting Liquid Lube, 55 Gal. ASCOT NO. MFG. NO. 435-02480 2480 DESCRIPTION Black-Ice Stop Rust Rim Release, 25 lb. Pail 435-02480 433-02053

TIRE & WHEEL SERVICE TIRE LUBRICANTS & SEALANTS 1.5 LITER SPRAYER W/ VITON SEAL • 1.5 liter capacity • Easy to use compression action sprayer • Ergonomic design with strong translucent tank with level indicator • Adjustable spray nozzle is great for applying a variety of liquids • Durable with exceptional chemical resistance • Easy to clean and maintain • Can be used with skid • Do not use with Break Clean ASCOT NO. MFG. NO. 632-00032 AS-32 DESCRIPTION 632-00032 1.5 Liter Sprayer w/ Viton Seal SURE SHOT PRESSURE SPRAYERS • Air pressurized and refillable • Environmentally safe, eliminates aerosol usage • For brake and parts cleaner, penetrating oils, lubricants, degreasers, solvents • MADE IN USA ASCOT NO. MFG. NO. 632-00005 632-00010 632-01002 K-5 K-10 A1002 632-10001 EZ CHECK LEAK DETECTOR • Finds leaks in all tires • Environmentally friendly • Excellent foam formation • Skin friendly • Commercial use only A1000R ELIMINATES AEROSOL USAGE MADE IN THE USA 632-01002 DESCRIPTION Partial Repair Kit for Model A Sure Shot Sprayers Complete Repair Kit for Model A Sure Shot Sprayers Sure Shot Black Enameled Steel Sprayer w/ Adjustable Nozzle Sure Shot Enameled Steel Sprayer - Red 160 ANODIZED ALUMINUM SPRAYER 433-25430 ASCOT NO. MFG. NO. 433-25430 433-25431 2543 2543-1G DESCRIPTION Ascot EZ Check Leak Detector, Quart (12 per case) Ascot EZ Check Leak Detector, Gallon (4 per case) ASCOT NO. MFG. NO. 632-02400 M2400S DESCRIPTION Anodized Aluminum Sprayer 433-25431 • Adjustable pistol-grip nozzle • Features a chemical resistant anodized finish • Will work with water, solvent & oil-based materials • Replaces Model “A” plated brass sprayers • 24 oz. capacity • MAX PRESSURE: 200 PSI • MADE IN USA ADJUSTABLE PISTOL GRIP MADE IN THE USA 400 B'LASTER PENETRANTS • #1-selling penetrant • Breaks free rusted or frozen parts • Protects against further rust and corrosion • Use on automotive, industrial, marine, plumbing & other equipment ASCOT NO. MFG. NO. 408-00026 26PB 408-00116 DESCRIPTION B'laster 26PB Penetrant, 18 oz. (6 per Case) 16-PB-DS B'laster Penetrant w/ ProStraw, 11 oz. can (12 per case) 408-00116 408-00026 INDUSTRIAL SPRAY BOTTLE • Industrial sprayer for use with light oils, solvents, and detergents • The durable polyethylene bottle is impervious to high and low temperatures • The trigger mechanism is resistant to damage caused by caustic materials ASCOT NO. MFG. NO. 632-00922 632-00923 TS-922 3210B32 DESCRIPTION 16 Oz. Spray Bottle 32 Oz. Spray Bottle 632-00922 632-00923

161 TIRE & WHEEL SERVICE 432-57270 TIRE LUBRICANTS & SEALANTS SLICK • Contains rust inhibitor to prevent rusting of rims • Tire adheres to rim. Will not slip • Helps to seal tire bead. Reduces bead damage • Will not gum up the bead or rim to hinder its future use • Reduces friction. Saves wear and repair on tire changers • Contains no soap or petroleum products ASCOT NO. MFG. NO. 432-57304 432-57305 432-57355 432-57270 DESCRIPTION 55073-4 55073-5 55073-55 55073-270 ASCOT TIRE SEALANTS • Continually self-seals punctures up to ½” diameter • Stops bead and oring leaks • Balances the tire and wheel assembly • Truck TPMS Sensor friendly • Protects tire casing from oxidation damage • Retread friendly product • Completely biodegradable and non-toxic • Non-flammable • Highway: minimum operating temp is 35 below zero • OTR: minimum operating temp is 4 below zero 432-57304 (4) 1-Gallon Bottles 5-Gallon Pail 55-Gallon Drum 275-Gallon Tote 432-57305 432-57355 LIQUITUBE • Effective for tire life. Seals ALL sources of air-loss • Helps balance truck tires • Helps maintain proper air pressure • Keeps tires cooler for increased tread wear • Does NOT rust or corrode wheels • Water soluble for easy clean out for recapping tire casings 451-00640 Scan For Application Chart 451-64005 Scan For Application Chart 451-64015 ASCOT NO. MFG. NO. 451-64015 451-64005 451-64155 451-64055 DESCRIPTION ASC640OTR ASC640 ASC55OTR ASC55 Ascot OTR Tire Sealant 5-Gallon Ascot Highway Tire Sealant 5-Gallon Ascot OTR Tire Sealant 55-Gallon Ascot Highway Tire Sealant 55-Gallon ASCOT NO. MFG. NO. 451-00640 451-20516 DESCRIPTION 1220-0640 LiquiTube 5-Gallon Pail 1220-516 LiquiTube 5-Gallon Injector Pump 451-20516

TIRE & WHEEL SERVICE TIRE LUBRICANTS & SEALANTS STS TIRE SEALANTS • Seals 2x more punctures than the competition • Permanently seals punctures up to 1/4" • Prevents wheel corrosion, glycol free • Non-toxic, non-flammable, noncombustible • 100% bio-degradable and water soluble • Lasts for the lifetime of the tire • Wide range of applications • Low freeze point, freeze/thaw stable 451-00440 162 FREEZE/ THA STABLE ASCOT NO. MFG. NO. 451-04128 451-00640 451-00006 451-00055 451-00275 451-14128 451-01640 451-00026 451-24128 451-02640 451-00036 451-00255 STSCS4128 STS640 STS6G STS55G STS275T STSCONCS4128 STSCON640 STSCON6G STSOTRCS4128 STSOTR640 STSOTR6G STSOTR55G DESCRIPTION STS TIRE SEALANT 4 (1) Gallon Per Case 5-Gallon Pail 6-Gallon Pail 55-Gallon Drum 275-Gallon Tote STS CONCENTRATE TIRE SEALANT 4 (1) Gallon Per Case 5-Gallon Pail 6-Gallon Pail STS OTR TIRE SEALANT 4 (1) Gallon Per Case 5-Gallon Pail 6-Gallon Pail 55-Gallon Drum ECO SEAL STS TOOLS AND ACCESSORIES ASCOT NO. 451-00101 451-00440 451-00551 451-00707 469-02311 469-02312 MFG. NO. ST-XM-1 ST-XM-44 STXM55 ST-TTS-WW VCR-A VCR-F • 7x corrosion resistance • Maintains non-acidic pH levels, even in high temperatures • Permanently seals punctures up to 1/4" • Glycol-free; prevents wheel corrosion • Environmentally friendly formula, uses recycled rubber and 100% biodegradable ingredients • Non-toxic, non-flammable, non-combustible • Low freeze point (-10°F) DESCRIPTION 1 Gal. Hand Pump 5 Gal. Hand Pump 55 Gal. Transfer Pump STS Display Stand Auto Valve Core Tool Farm Valve Core Tool ASCOT NO. MFG. NO. 451-05510 504-00005 504-00055 504-00275 504-02424 504-01832 504-01248 DESCRIPTION ST-XM55 ECO5G ECO55G ECO275G ECOCS2424 ECOCS1832 ECOCS1248 5 Gal. EcoSeal Hand Pump 5 Gal. Pail 55 Gal. Drum 275 Gal. Tote 24 oz. Bags 32 oz. Bags 48 oz. Bags

163 TIRE & WHEEL SERVICE MARKERS & PAINT STICKS PAINTSTIK® MARKERS • Real paint in stick form • Ideal for coding tire casings • Marks are long lasting, water resistant and weather resistant • Marks will withstand vulcanizing and recap temperatures • Non-toxic, contains no lead • Marking range -50°F to 150°F (-46°C to 66°C) • INCLUDES: 12 sticks per box, 12 boxes per case 459-00258 ASCOT TIRE CRAYONS 459-00257 Ascot No. 459-00257 459-00258 QUIK STIK® ASCOT NO. COLOR 459-80220 White (Markal B) 459-80221 459-80222 459-80223 459-80225 Yellow (Markal B) Red Black Blue ASCOT NO. COLOR 459-80226 459-80227 459-80228 459-80229 459-80230 459-80231 Gray Gold FLUORESCENT PAINTSTIK ORIGINAL B • Vibrant Colors for Improved Visibility • Fluorescent Marks Glow Under Up or Black Light • Easy-To-Hold, Recyclable Paperboard Holder Protects Paintstik for Maximum Use Green Pink Purple Brown ASCOT NO. COLOR 459-80232 Aluminum 459-80257 White 459-80258 459-80271 Yellow Orange MINI • Fast-drying, vibrant paint marks dry in 5 to 7 minutes • Compact plastic holder with clip cap stores easily in pocket and keeps hands and clothing clean • Marks on virtually any surface; wet, smooth, rough, or hot • Weather- and UV-resistant paint for long-lasting marks • Solid paint marker advances and retracts by turning twist-up knob • Xylene and 2-Butoxyethanol free formula to reduce health risks • MARKING RANGE: 0°F to 392°F (-18°C to 200°C) EASILY MARKS ON ANY SURFACE ASCOT NO. MFG. NO. DESCRIPTION 459-61126 459-61127 459-61128 459-61129 61126 61127 61128 61129 PAINTSTIK® ASCOT NO. MFG. NO. DESCRIPTION 459-82831 459-82832 459-82834 459-82835 459-82836 459-82842 82831 82832 82834 82835 82836 82842 Mini Quik Stik® Marker (White) Mini Quik Stik® Marker (Yellow) Mini Quik Stik® Marker (Red) Mini Quik Stik® Marker (Black) MARKER HOLDER Fluorescent Paintstik Original B (Yellow) Fluorescent Paintstik Original B (Red) Fluorescent Paintstik Original B (Orange) Fluorescent Paintstik Original B (Blue) Fluorescent Paintstik Original B (Green) Fluorescent Paintstik Original B (Pink) QTY./BOX 12 12 12 12 Mfg. No. TRC-002Y Description TRC-002W Ascot Tire Crayons (White) Ascot Tire Crayons (Yellow) Qty./Box 12 12 459-85100 ASCOT NO. MFG. NO. 459-85100 85100 DESCRIPTION 6" Push-Button Metal Holder for B-Paintstik

TIRE & WHEEL SERVICE HYDRAULIC PUMPS 5-QUART AIR HYDRAULIC PUMP - STEEL RESERVOIR • Builds 10,000 PSI of pressure • Operates on 80-120 PSI of inlet air pressure • Durable metal air motor assemblies • Designed for conditions associated with OTR sites • WEIGHT: 30 lbs (13.6 kg) DURABLE METAL AIR ASSEMBLIES AIR HYDRAULIC PUMP (5-QUART OIL CAPACITY) • Rugged 5-quart metal reservoir • Air inlet filter keeps air clean • All-metal air motor • 10,000 PSI hydraulic pressure ALL-METAL AIR MOTOR 164 318-15920 318-15025 ASCOT NO. MFG. NO. 318-15025 15025 DESCRIPTION 5-Quart Air/Hydraulic Pump with Steel Reservoir ASCOT NO. MFG. NO. DESCRIPTION 318-15920 318-15930 15920 15930C MILLER MUD FLAP TURBO II AIR HYDRAULIC PUMP (3.5-QUART OIL CAPACITY) • Rugged polyglass reservoir with sight gauge • 10,000 PSI hydraulic pressure • Easily works on rams and bead breakers with oil to spare • Unique design easily fits truck storage bins • Turbo II pump-fastest pump available • Redesigned air motor is ine actuated design f • Fits AME 15920 and IMT style pumps • Prevents dirt from getting into the release valve assembly • Inexpensive solution to lengthen the life of your pumps 318-15901 ASCOT NO. MFG. NO. 318-15901 15901 DESCRIPTION Miller Mud Flap AIR HYDRAULIC PUMP (2-GALLON OIL CAPACITY) • Rugged 2-gallon metal reservoir • Air inlet filter keeps air clean • All metal air motor • 10,000 PSI hydraulic pressure RUGGED POLYGL RESERV 5-Quart Air Hydraulic Pump 15920 w/Hose, Coupler & Mud Flap RUGGED 2-GALLON CAPACITY 318-15000 ASCOT NO. MFG. NO. DESCRIPTION 318-15000 318-15010 318-15020 15000 15010 15020 3.5-Quart Air Hydraulic Pump Above Pump With Hydraulic Hose 5-Quart Air Hydraulic Pump ASCOT NO. MFG. NO. DESCRIPTION 318-15940 318-15950 15940 15950C 2-Gallon Air Hydraulic Pump 2-Gallon Air Hydraulic Pump w/Hose & Coupler

165 TIRE & WHEEL SERVICE HYDRAULIC PUMPS 1/2-GALLON AIR/HYDRAULIC PUMP - ALUMINUM RESERVOIR 2½-QUART TITAN AIR/HYDRAULIC PUMPS - ALUMINUM RESERVOIRS • Operates with as little as 80 PSI (5.5 bar) • Heavy duty aluminum reservoir • Durable metal air motor • WEIGHT: 14 lb. (6.4 kg) • For use with a variety of hydraulic rams, cylinders, presses, bead breakers, and other hydraulic equipment requiring 10,000 psi for operation • Equipped with an air exhaust muffler for quiet pumping of air motor • Air and oil inlet filters for reducing risk of damage from contamination• Durable, lightweight design great for service trucks, shop environments or out in the field • Internal pressure relief valve system (load limit device) for overload protection • Engineered with durable lightweight and corrosive resistant plastic components, increasing the life of the air motor and hydraulic pump Kit with Hose, Coupler & Reducer 318-10518 318-15906 ASCOT NO. MFG. NO. 318-10518 318-11518 10518 10518C SINGLE ACTING ALUMINUM LOCK NUT CYLINDER 318-15907 • Safety lock nut for mechanical load holding • Low weight and good portability • High flow quick coupler • Overflow port functions as a stroke limiter • Spring return • Features a carrying handle ASCOT NO. MFG. NO. DESCRIPTION 318-15905 15905 318-15906 318-15907 15906 15907 2-1/2-Quart Titan Air/ Hydraulic Pump, 10,000 PSI 2-1/2-Quart Titan Air/ Hydraulic Pump, 5,500 PSI 2-1/2-Quart Titan Air/ Hydraulic Pump, 3,900 PSI ASCOT NO. MFG. NO. 318-10808 318-10809 10808 10809 CAPACITY (TONS) 50 100 COLLAPSED HEIGHT 12-1/2" 13-1/3" EXTENDED HEIGHT 18-3/4" 19-3/4" 318-10808 DESCRIPTION 1/2-Gallon Air/Hydraulic Pump 1/2-Gallon Air/Hydraulic Pump Kit. INCLUDES Hose, Coupler & Reducer WEIGHT (LBS.) 26.4 66

TIRE & WHEEL SERVICE BEAD BREAKERS GIANT TIRE/EARTHMOVER TIRE BEAD BREAKER • Use on 5-piece rims 15" to 51" without pry bar bead loosening pockets • Model 15000 or 15040 air/hydraulic pump recommended f operation • Replaces Goodyear TO“COMBI” TIRE BEAD BREAKER • Works on a single, two and thr agricultural and earthmover tir beads in seconds using 10,000 lbs. of f screws, bolts or attachments • “ breaker will not work on five-piec mover giant wheel/rim ASCOT NO. MFG. NO. 422-11040 11040 DESCRIPTION Giant Tire/Earthmover Tire Bead Breaker 422-16200 GIANT TIRE/EARTHMOVER TIRE BEAD BREAKER • 4-1/4" stroke, 14-ton ram will break the toughest beads • Use on 5-piece rim 25" to 51" with pry bar/bead loosening pocket • Replaces Goodyear TO-1600HA • Same as IMT-1800 • Model 15000, 150 ommended QUICKLY 166 BREAKS TOUGHEST BEADS 422-12000 422-12020 422ASCOT NO. MFG. NO. 422-11010 422-12000 11010 12000 422-11000 422-12070 11000 12070 Bead Breaker Bead Breaker Kit. INCLUDES: 11000 Bead Breaker, 15000 Pump, 16040 Hose Assembly 422-12090 12090 Bead Breaker Kit. INCLUDES: 11000 Bead Breaker, 15920 Pump, 16040 Hose Assembly 422-16070 16070 Shur-Lok Adapter Kit TITAN EARTHMOVER BEAD BREAKER • Ideal for tire dealer who requires occasional use of bead breaker • 10-ton cylinder has enough force to break most beads • 4" (10 cm) stroke length • Unit will work on 5 piece wheels with bead loosening pockets • WEIGHT: 34 lbs. (15.5 kg) ASCOT NO. MFG. NO. 422-11005 11005 DESCRIPTION Titan Earthmover Bead Breaker 422-11005 422-12020 422-16200 12020 16200 DESCRIPTION Bead Breaker Bead Breaker Kit. INCLUDES: 11010 Bead Breaker, 15000 Pump and 16040 Hose Assembly Bead Breaker Kit. INCLUDES: 11010 Bead Breaker, 15920 Pump and 16040 Hose Assembly Conversion Kit for Combi Bead Breaker MODIFIED “COMBI” TIRE BEAD BREAKER • Modified 11010, the most popular tool for breaking beads on all agriculture wheels • Most affordable bead breaker for new 3 piece wheel assemblies • Modified jaw and feet allow for larger grab on larger wheel assemblies • Can be used on the front and back side of the wheel assembly • All parts (except for modified feet and jaw) can be interchanged with 11010 ASCOT NO. MFG. NO. DESCRIPTION 422-11020 11020 Modified "Combi" Tire Bead Breaker MOST POPULAR 422-11020

167 TIRE & WHEEL SERVICE BEAD BREAKERS OTR GIANT TIRE BEAD BREAKER DUAL AGRICULTURAL TRACTOR TIRE BEAD BREAKER • HEAVY DUTY: 10-tons of force breaks the toughest beads • Breaks inside bead on outside dual farm tractor tires • Requires just 3" of operating space between dual tractor tires • Use with 10,000 PSI air/hydraulic pump • No need to remove outside wheel to change tire on outside dual 422-11060 • Compact, lightweight tool used primarily on 25" and 29" earthmover wheels • Originally marketed as Goodyear TO-1600-HA • Works only on 5 piece wheels with bead loosening pockets • 2 1/8" (5.4 cm) stroke • 10 tons of hydraulic force • Used with 10,000 PSI (700 bar) air/hydraulic pump • WEIGHT: 23 lbs. (10 kg) COMPACT & LIGHTWEIGHT ASCOT NO. MFG. NO. 422-11060 11060 DESCRIPTION Dual Agricultural Tractor Tire Bead Breaker OTR O-RING INSTALLER TOOL • Installs/Removes o-rings on OTR wheel assemblies up to 30” (76.2 cm) • Pushes rim flange back for easy access to service o-ring • NOTE: Wheel components must be separated using an alternative tool prior to use to prevent damage to 92200 • Weight: 22 lbs. (9.9 kg) 422-92200 ASCOT NO. MFG. NO. 422-92200 92200 TITAN FARM TIRE BEAD BREAKER • Ideal for tire dealer who requir use of bead breaker • 10-ton c enough force to break most beads • 4" (10 cm) stroke length • Unit will break all single and 2-piece and most 3-piece wheels • WEIGHT: 34 lbs. (15.5 kg) ASCOT NO. MFG. NO. 422-11015 11015 DES Titan Farm Tire Bead Breaker GIANT TIRE/ EARTHMOVER BEAD BREAKER • Use on 5-piece 25" to 51" with pry bar/bead loosing pockets • Ram will break the toughest of beads • Use with 10,000 PSI Hydraulic Pump ASCOT NO. MFG. NO. 422-10100 10100 DESCRIPTION Giant Tire/Earthmover Bead Breaker GIANT TIRE/EARTHMOVER TIRE BEAD BREAKER • Use on all 39", 45", 49", 51", 57" and 63" wheel sizes • In most cases you must first use Model 10105 or 10100 bead breaker to start the movement of the rim flange. Model 11030 can then be used • Model 15020 or 15040 air/ hydraulic pump recommended for operation • Replaces Goodyear TO-2000-HA 422-10100 ASCOT NO. MFG. NO. 422-10103 422-12110 11030 12110 DESCRIPTION Giant Tire Earthmover Bead Breaker Kit Contains 11030 Bead Breaker, 15040 Pump And 16020 Hose Assembly 422-10103 MAXIMUM FORCE ASCOT NO. MFG. NO. 422-11044 11044 422-11015 DESCRIPTION OTR 3000 Giant Tire Bead Breaker DESCRIPTION OTR O-Ring Installer Tool OTR 3000 GIANT TIRE BEAD BREAKER • Designed specifically to work on Topy and Rimex OE wheels found on Terex, Komatsu, Liebherr and Le Tourneau • Designed to prevent the tool from kicking out while under load • 6’ Stroke ram delivers maximum force • New Universal Jaw design works on ALL wheels 51" – 63" • WEIGHT: 54 lbs. (24.5 kg) ASCOT NO. MFG. NO. 422-11050 11050 DESCRIPTION OTR Giant Tire Bead Breaker 422-11050

TIRE & WHEEL SERVICE BEAD BREAKERS TITAN PRO MODIFIED COMBI BEAD BREAKER • Compact design allows tool to be used on front or back of wheel • Ideal to break large OTR 3-piece wheels • Larger clamp and feet allow tool to easily clamp onto wheels • Most parts interchange with common bead breakers in the market • Designed for use on 25” multi-piece wheels • Tire Sizes: 23.5x25, 26.5x25, 29.5x25 • 11 Ton – 10,000 PSI (700 BAR) ASCOT NO. MFG. NO. 422-11025 11025 DESCRIPTION Titan Pro Modified Combi Bead Breaker MAXI BEAD BREAKER • Works on ALL 3-piece wheels with extended flange that have replaced the older 5-piece wheels • Designed to work on front or back of the wheel with no attachments or accessories • Clamps easily to the wheel • Longer feet and claw than the “Combi” Bead Breaker Model #10101 • No setup time 422-10102 422-11025 ASCOT NO. MFG. NO. 422-10102 10102 DESCRIPTION Maxi Bead Breaker COMBI STYLE ALUMINUM BEAD BREAKER STINGER BEAD BREAKER • OTR Bead Breaker for heavy dut rims that replace standard 5-piec • Works on both front and back of wheel without dismounting wheel from vehicle • W new 3-piece 25" wheels or larger • W wheels with CAT “Shur-Lok” safe ASCOT NO. MFG. NO. 318-11090 11090 DESCRIP Stinger Bead Breaker ASCOT NO. MFG. NO. 422-40801 40801 DIAMONDBACK ALUMINUM BEAD BREAKER KIT • Lightweight Aluminum reduces weight by 40% • Longer feet allow better fit onto wheel/rim • Feet fully engage rim flange and push against the bead of the tire • WEIGHT: 31 lb. (14kg) DESCRIPTION COMBI Style Aluminum Bead Breaker "COMBI" HYDRAULIC TIRE BEAD BREAKER • Works on single, two and three-piece truck tires/ rims • Breaks beads in seconds using 13.8 tons of force • “Combi” Bead Breaker will not work on five-piece Earthmover giant wheel/rim, Model #10100 or Model #10105 is required 318-11090 • Lightweight aluminum construction • 10 tons of bead breaking force • Comparable to the Model #10101 Combi bead breaker • To be used on 3-piece wheel assemblies • Extended jaw for deep dish style wheels (extended flange) 168 422-40801 422-10101 ASCOT NO. MFG. NO. 422-11076 11076 Diamondback Aluminum Bead Breaker Kit 422-11076 DESCRIPTION ASCOT NO. MFG. NO. 422-10101 10101 DESCRIPTION "COMBI" Hydraulic Tire Bead Breaker

169 TIRE & WHEEL SERVICE BEAD BREAKERS PNEUMATIC BEAD BREAKER • Recommended for agricultural, small OTR and most truck tires • EXTEMELY FAST: saves time over conventional hydraulic bead breakers • LIGHTER WEIGHT THAN CONVENTIONAL BEAD BREAKERS: only 17 lb. • Includes storage case • Requires a minimum of 85 psi WINNTEC WHEEL BREAKER SET • Provides a safe and easy way to loosen oxidized (stuck) wheels • Simply place the ram between the duals or between the inside wheel & frame • The manual pump allows the technician to feel how much pressure is being applied • Adaptors included for wider work spaces SAFE AND EASY 423-47180 423-00101 ASCOT NO. MFG. NO. 423-00101 DESCRIPTION GTABB-01 Pneumatic Bead Breaker ASCOT NO. MFG. NO. 422-47180 G471180 DESCRIPTION Winntec Wheel Breaker Set SLIDE HAMMER BEAD BREAKER PLATINUM DEMOUNT TOOL • Protect your expensive wheels from swinging hammers by breaking the bead loose with this slide hammer • Demounts all standard 22.5" and 24.5" tubeless tires • Only a single tool needed to demount tires • Eliminates the need to lift the tire and wheel making a hard job easy and protecting against insurance claims • Unique design protects valuable tire casings for retreading • Handle design protects against damage to the tool and other objects that may come in contact PROTECTS WHEELS FROM DAMAGE 448-12100 ASCOT NO. MFG. NO. 427-12026 12026B DESCRIPTION Slide Hammer Bead Breaker ASCOT NO. MFG. NO. 448-12100 12100 DESCRIPTION Platinum Demount Tool PROTECTS TIRE CASINGS

TIRE & WHEEL SERVICE BEAD BREAKERS TRUCK/OTR/AG BEAD BREAKER • Use on rim sizes 24” to 29” • Foot length is 5.3” • Claw length is 6.3” • Aluminum Construction, 18lbs. • Use with 10,000 PSI air hydraulic pump • 3.5” stroke length • Made in Italy ASCOT EXCLUSIVE! COMING FALL 2026 5 PIECE BEAD BREAKER • Use on rim sizes 25” to 51” • Works on five piece rims • Aluminum construction, 18lbs. • Use with 10,000 PSI air hydraulic pump • 4.25” Stroke length • Made in Italy 427-13874 427-14068 170 ASCOT NO. MFG. NO. 422-13874 13874 DESCRIPTION VMR Truck OTR AG Bead Breaker OTR BEAD BREAKER • Use on rim sizes 25” to 49” • Works on single, two and many three piece wheels • Aluminum construction, 35lbs. • Use with 10,000 PSI air hydraulic pump • 3.5” Stroke length • Claw For inner parts of rims available 13876 • Made in Italy INNER SIDE RIM CLAW • Claw for inner parts of rims • Use with the 13878 bead breaker • Made in Italy ASCOT NO. MFG. NO. 422-14068 14068 DESCRIPTION OTR 5 Piece Bead Breaker 422-13878 13878 VMR OTR Bead Breaker ASCOT NO. MFG. NO. 422-13876 13876 DESCRIPTION Inner Side Rim Claw

171 TIRE & WHEEL SERVICE BEAD R BREAKERS IMP • L bead br w flange • Deliv to the tip • Designed f shop or r 427-35926 “SWAN NE BREAKING T • PORTABLE T to handled bead br or hydraulic bead br 427-45926 PORTABLE TOOLS ASCOT NO. MFG. NO. 427-35924 427-35926 427-45926 T24B T26B 35926-11 FLOOR TYPE BEAD BREAKER • Use on custom wheels, without center holes, wide based motorcycle tires, ATV tires • Used to prevent bending of wheels ASCOT NO. MFG. NO. 421-00098 T98 DESCRIPTION Deluxe TREAD WIDTH Up to 11" 421-00098 DESCRIPTION LENGTH LENGTH EXT. 46" 50" Economy Heavy Duty 72" 80" WEIGHT 13.5 lb. 23 lb. Impact Bead Breaker Replacement Grips ASCOT NO. MFG. NO. LENGTH STOCK WT. 427-00041 427-00042 427-00052 T41 T42 T52 30" 30" 33" ATV BEAD BREAKER • Constructed of heavy duty steel • Works with any center-post tire changing machine and adjusts to sizes of 6" to 12" ATV rims • No hammers, wrenches or additional tools required WEIGHT 28.5 lb. 421-38620 PORTABLE BEAD BREAKER • Breaks beads on most sizes of passenger tires & light trucks ASCOT NO. MFG. NO. 421-00100 T100 DESCRIPTION Portable Bead Breaker DRIVING IRON • Used for loosening rusted truck and bus beads LOOSENS RUSTED 427-26000 ASCOT NO. MFG. NO. 427-26000 T26A DESCRIPTION LENGTH STOCK 11-3/4" Driving Iron 1-1/4" WEIGHT 4.4 lb. HANDLE LENGTH 36" HEAVY DUTY STEEL 421-00100 ASCOT NO. MFG. NO. 421-38620 38620 WEIGHT 5.2 lb. IMPACT BEAD BREAKER • Channel your strength into a single impact to efficiently break tire beads • The fastest of all manual bead breaker tools • Efficient & uncomplicated to operate • Suited for truck tires of a variety of sizes and widths • Curved tip slides itself perfectly between bead and rim flange, preventing damage on impact • Made of carbon steel, set to become one of the longest-lasting tools in the shop DESCRIPTION WEIGHT ATV Bead Breaker 7 lb. 7/8" 7/8" 7/8" 5.3 lb. 4.8 lb. 5.5 lb. ASCOT NO. MFG. NO. 427-01322 MBB DESCRIPTION Slide Hammer Bead Breaker

TIRE & WHEEL SERVICE BEAD BREAKERS 135-10605 135-10606 HYDRAULIC COUPLERS ASCOT NO. MFG. NO. 135-10605 135-10606 PVV-38-M PVV-38-F • High-flow hydraulic coupler, 10,000 PSI working pressure DESCRIPTION 3/8" Male Hose Half Coupler - For Hydraulic Rams 3/8" Female Ram Half Coupler - For Hydraulic Rams 172 HYDRAULIC QUICK CONNECT COUPLER/PLUG • 10,000 PSI maximum operating pressure • Safety sleeve lock prevents accidental disconnection • Heavy duty back-up ring prevents o-ring extrusion • Heat treated and plated steel for greater wear and corrosion resistance • Selfsealing poppet valves provide excellent high and low pressure seating ASCOT NO. MFG. NO. 135-11606 135-12606 DESCRIPTION FD35-1001-0606 FD35-1002-0606 Hydraulic Quick Connect Coupler Hydraulic Quick Connect Plug 135-11606 135-12606 RUBBER DUST COVER FOR HYDRAULIC COUPLERS • Used to keep dirt and debris from your hydraulic coupler when not connected • Equipped with a pre-slit ring to allow coupler to slide easily over the counter • Comes standard with 8' and 10' hydraulic hoses ASCOT NO. MFG. NO. 319-03732 03-RDC DESCRIPTION Rubber Dust Cover for Hydraulic Couplers 3/8” HYDRAULIC HOSES • 10,000 PSI Working Pressure, 20,000 PSI Burst Pressure • High flow valve for fast inflation • Includes half coupler and plastic dust cover ASCOT NO. MFG. NO. DESCRIPTION 318-04960 318-04120 9010-08 8’ Hydraulic Hose Assembly 10’ Hydraulic Hose Assembly 9010-10 318-04960

173 TIRE & WHEEL SERVICE OTR SERVICE TOOLS FLANGE RING PULLER • Lifts the rim base and bead seat band from the tire • Aids in bead seating during inflation • Attaches to a standard boom style service truck • 4-point hook/chain assembly for optimal lifting • Chain lengths of 30" (76.2 cm) • Includes 2 flat hooks and 2 tapered hooks to allow use on all rim styles • WEIGHT: 32 lb. ASCOT NO. MFG. NO. CAPACITY 402-08029 93000 5,000 lb. EARTHMOVER TIRE BEAD HOOKS • Used to connect with hydraulic boom on tire service truck for transport of tires • Model 94000 has slim design which will fit inside all tires, even ones that have been stacked 402-08029 CONNECT WITH HYDRAULIC BOOM 2-WAY PUSH BAR • Two-way push bar allows for quick and easy depression of the bead seat band flange ring and rim for removal of the lock ring and O-ring • Can also be used to retain the tire during inflation 429-90401 429-90402 429-90403 The Earthmover Tire Bead Hook in use. 429-08837 ASCOT NO. MFG. NO. 429-06661 429-08837 92005 92000 CAPACITY 33" to 57" 25" to 51" BEAD PUSH OFF TOOL • Lightweight tool for removing combine and tractor tires after breaking the bead • Pushing force of 8,000 lbs. and a 5.5" stroke, a removable handle for compact storage and uses hydraulic pressure to force the tire off the rim • Hooks between the rim and the tire bead ASCOT NO. MFG. NO. 429-90401 429-90402 429-90403 94010 94020 94000 DESCRIPTION CAPACITY Earthmover Tire Bead Hook 16,000 lb. Earthmover Tire Bead Hook 12,000 lb. Earthmover Tire Bead Hook 4,000 lb. RING MASTER O-RING AND LOCK RING INSTALLER • Pushes & Holds rim flange & tire back for easy O-ring and lock ring installation • Lightweight and easy to use • PORTABLE: Fits in tire truck tool box • Eliminates use of boom crane & cumbersome tire tools • Easy one-man operation • Works on all 3-piece and 5-piece rim/wheels up to 30" in diameter • Great for tough to handle forestry tires/wheels • Eliminates danger of pushing equipment off jack with crane • MADE IN THE USA 429-10108 ASCOT NO. MFG. NO. 429-10108 11080 TIRE SLING • Adjustable locking sling f single or dual assembly tir locking mechanism so tires don’t rotate • MADE IN THE USA ASCOT NO. MFG. NO. 402-06662 91000 DESCRIPTION CAPACITY Small Sling Assembly 6,500 lb. DESCRIPTION Bead Push Off Tool MADE IN THE USA MADE IN THE USA ASCOT NO. MFG. NO. 429-70162 70162 DESCRIPTION Ring Master O-Ring and Lock Ring Installer

TIRE & WHEEL SERVICE CRIBBING SETS & WHEEL CHOCKS CRIB STANDS FOR 55-TON CYLINDERS • Steel cribbing is durable, will not bend or warp • Recessed area on cribbing fits 7" square plate on 55-ton cylinders • Each unit contains a built in carrying handle • Tested/Certified up to 100 tons • Available in three sizes • Also available in a kit (Ascot No. 429-08074) that includes all three sizes ASCOT NO. MFG. NO. 429-08075 429-08076 429-08077 15012 15022 15032 SUPER STACKER CRIBBING BLOCKS 429-08075 WILL NOT BEND OR WARP 429-08076 • 100% recycled plastic • Unmatched strength - stronger than wood • Resistant to gas, oil and chemicals • Certified tested • 50year warranty against splitting, rot, fluid absorption, termites or mold caused by the environment • Color-coded lanyards depcit each block's working load limit • MADE IN THE USA 174 DESCRIPTION 3" Steel Crib Stand 6" Steel Crib Stand 9" Steel Crib Stand 429-15230 429-08077 STEEL CRIB KIT • Durable Steel Cribbing, will not bend or warp • MODEL 15002 IS A COMPLETE SET: 3", 6" and 9" stands • Units can be nested together for 18" of total lift • Recessed area on cribbing fits 7" square plate on 55-Ton Cylinders • Each unit has a carry handle 429-08074 429-15239 15239 429-15239 ASCOT NO. MFG. NO. 429-15230 15230 DESCRIPTION 6" x 7" x 24" Cribbing Block with Blue Lanyard, WORKING LOAD LIMIT: 110,010 lb. (49,900 kg) 6" x 7" x 24" Cribbing Block with Orange Lanyard, WORKING LOAD LIMIT: 129,631 lb. (58,800 kg) SERVICE TRUCK CRIBBING KIT • 100% recycled plastic • Unmatched strength - stronger than wood • Resistant to gas, oil and chemicals • Certified tested • 50-year warranty against splitting, rot, fluid absorption, termites or mold caused by the environment • MADE IN THE USA ASK ABOUT CUSTOM CONFIGURATIONS! The Steel Crib Stand in use. 429-15218 ASCOT NO. MFG. NO. DESCRIPTION 429-08074 15002 Steel Crib Kit ASCOT NO. MFG. NO. 429-15218 15218 DESCRIPTION KIT INCLUDES: (12) x 15230 & (1) x 14468LT

175 TIRE & WHEEL SERVICE CRIBBING SETS & WHEEL CHOCKS CRIBLOK™ COMPOSITE CRIBBING SYSTEM KITS • All in one simple & easy cribbing solution that provides a safe and stable foundation for any load up to 100 Tons (200,000 lbs.) • Designed as a solid support system with no voids between cribbing contact points, delivering a solid, safe, and secure cribbing support system • Outlasts wood and other composite cribbing alternatives • Will not get brittle over time or deteriorate • Designed for outdoor/ indoor usage • 21 inch length blocks (18 inches surface area [324 sq. in.]) designed for a smaller footprint on job sites, in the shop, and on trucks while in storage • High Visibility Color top and bottom plates to pr STEEL CRIBBING STAND KIT • All pieces interlock • Can be used individually or stacked together for various lift heights • They will no slide or shift during lifting 429-12500 ASCOT NO. MFG. NO. 429-12500 12500 Steel Cribbing Stand Set STEEL CRIBBING STANDS 429-12536 • All pieces interlock • Can be used individually or stacked together or various lift heights • They will not slide or shift during lifting 429-12501 429-12532 ASCOT NO. MFG. NO. 429-12531 429-12532 429-12533 429-12536 429-12537 429-12538 12531 12532 12533 12536 12537 12538 DESCRIPTION 14-PC CribLok™ Composite Cribbing System Kit 26-PC CribLok™ Composite Cribbing System Kit 8-PC CribLok™ Composite Cribbing System Kit 10-PC CribLok™ Composite Cribbing System Kit 12-PC CribLok™ Composite Cribbing System Kit 20-PC CribLok™ Composite Cribbing System Kit ASCOT NO. MFG. NO. 429-12501 429-12502 429-12503 12501 12502 12503 DESCRIPTION 3" Steel Cribbing Stand 6" Steel Cribbing Stand 9" Steel Cribbing Stand

TIRE & WHEEL SERVICE BEAD SEATING DEVICES ASCOT 5-GALLON BEAD SEATERS • 5-gallon capacity • Equipped with a butterfly valve for maximum air discharge • Designed for commercial use on large truck tires, passenger and ATV tires to 24.5” • Made in Taiwan ASCOT NO. MFG. NO. 473-01500 473-02505 473-02501 RPG-05GAL RPG-05GALED RPG-05GALAL DESCRIPTION 5-Gallon Bead Seater with Butterfly Valve 5-Gallon Bead Seater with Butterfly Valve - End Discharge 5-Gallon Bead Seater with Butterfly Valve - ALUMINUM 473-02510 ASCOT 10-GALLON BEAD SEATERS • 10-gallon capacity • Equipped with a butterfly valve for maximum air discharge • Designed for commercial use on large truck tires, passenger and ATV tires to 24.5” • Made in Taiwan ASCOT NO. MFG. NO. 473-02510 473-02511 DESCRIPTION RPG-10GAL RPG-10GALAL 10-Gallon Bead Seater with Butterfly Valve 10-Gallon Bead Seater with Butterfly Valve - ALUMINUM ASCOT 13-GALLON BEAD SEATER • Aluminum tank • 10-gallon capacity • Equipped with a butterfly valve for maximum air discharge • Designed for commercial large truck tires 24” to 54” • Made in Taiwan ASCOT NO. MFG. NO. 473-02513 DESCRIPTION RPG-13GALAL 13-Gallon Bead Seater with Butterfly Valve - ALUMINUM 473-02513 ASCOT BEAD SEATER PARTS & ACCESSORIES ASCOT NO. MFG. NO. DESCRIPTION 473-01502 473-01504 473-01505 473-01506 473-01509 473-01510 473-01516 473-01518 RPG-05GAL-02 RPG-05GAL-04 RPG-05GAL-05 RPG-05GAL-06 RPG-05GAL-09 RPG-05GAL-10 RPG-10GAL-16 RPG-05GALED-01 *Colors May Vary 473-01509 473-01502 473-01514 473-01505 Safety Valve for RPG Bead Seater Butterfly Valve for RPG Bead Seater Threaded Barrel for RPG Bead Seater 473-01510 Air Pressure Gauge for RPG Bead Seater 90° NPT Elbow for RPG Bead Seater Ball Valve for RPG Bead Seater 2" Butterfly Valve for RPG Bead Seater Threaded Barrel for RPG End Discharge Bead Seater 473-01500 473-02505 176

177 TIRE & WHEEL SERVICE BEAD SEATING DEVICES 5 GALLON CHEETAH BEAD SEATERS • Makes seating the most difficult bead safe and simple • Designed for commercial use on large truck tires, passenger and ATV tires • Fill tank from any service station chuck or service truck air compressor 473-00500 Ascot No. 473-00501 473-00207 Mfg. No. Description 473-00500 CH-5 Cheetah Bead Seater, 5-Gallon CH-5AL Same As Above With Aluminum Tank BS-07 BS-07 Cheetah Bead Seater 10-GALLON CHEETAH BEAD SEATER • 10-gallon capacity with ASME certified tank • Designed for small rear ag/ grader or smaller tires; Standard for fleet work, farm and service trucks • 13-gallon capacity with ASME certified tank • Seats bead on tractor & heavy equipment tires from 24.5" to 54" • Includes a straight barrel, new Magnum barrel (for larger tires) and safety goggles as standard equipment • Extends tire service capability not possible with smaller units Capacity 5-Gallon 5-Gallon 473-00207 5-Gallon 13-GALLON CHEETAH BEAD SEATER 473-00013 473-00010 Ascot No. 473-00010 473-00011 Mfg. No. Description CH-10 10-Gallon Ascot No. Mfg. No. CH-10AL 10-Gallon With Aluminum Tank Description 473-00013 CH-13AL 13-Gallon With Aluminum Tank

TIRE & WHEEL SERVICE BEAD SEATING DEVICES 473-03102 473-02102 CHEETAH BEAD SEATER REPLACEMENT PARTS DESCRIPTION ASCOT NO. 473-01104 473-01106 473-01107 473-01230 473-03104 473-01502 473-04103 MFG. NO. '01.104 '01.106 '01.107 473-02102 '02.102 473-02103 '02.103 473-02106 '02.106 473-02107 '02.107 473-03102 '03.102 473-03103 '03.103 473-01106 473-02103 VIPER™ BEAD SEATERS • Push button discharge • Unique handle design for stability and control • ASME Certified • Rapid release of air • Newly designed jet barrel for greatly increased air volume delivery • More power less air pressure • Reduces air noise • Greater air distribution • No wheel damage • Works on large range of tires 473-03104 '03.104 473-03106 '03.106 473-04103 '04.103 473-05102 '05.102 473-06813 '6813 1-1/2" Pipe Nipple for Cheetah Bead Seaters Pressure Gauge for Cheetah Bead Seaters 3/4" - 1/4" Bushing for Cheetah Bead Seaters '01.230BT Handle & Nut for Butterfly Valve for Cheetah Bead Seaters 1-1/2" Discharge Valve for Cheetah Bead Seaters 1-1/2" Threaded Barrel for Cheetah Bead Seaters Magnum I Barrel for Cheetah Bead Seaters 1-1/2" Lock Nut for Cheetah Bead Seaters 2" Discharge Valve for Cheetah Bead Seaters 2" Barrel for Cheetah Bead Seaters 90° NPT for Cheetah Bead Seaters Magnum II Barrel for Cheetah Bead Seaters Ball Valve for Cheetah Bead Seaters Safety Release Valve for Cheetah Bead Seaters Flared Barrel for BS-07 for Cheetah Bead Seaters 178 473-01110 PUSH BUTTON DISCHARGE 473-01113 ASCOT NO. MFG. NO. 473-01110 473-01113 473-01118 DESCRIPTION VP 10S Viper™ 11.5 Liter Bead Seater, Steel Tank VP 13AL Viper™ 13 Liter Bead Seater, Aluminum Tank VP 18AL Viper™ 18 Liter Bead Seater, Aluminum Tank 473-01118 *Please note we recommend the use of a good quality inline filter to remove contaminants and moisture. *Please note we recommend the use of silicone spray or air tool oil occasionally to properly maintain the valve.

179 TIRE & WHEEL SERVICE BEAD SEATING DEVICES R JET PAK BEAD SEATER UPGRADE DEVICE • Faster and easier than standard ball or butterfly discharge valve operation • Discharges tank with the press of a button • Safety cover prevents accidental trigger release • TWO PORT SIZES AVAILABLE: CH1.5JP (1.5") and CH2.0JP (2") to fit any standard bead seater in a variety of tank sizes • Attaches easily to existing pipe nipple, replacing manual discharge valve • Includes our new improved Jet Barrel (VP 3.103 or VP 2.103) for greater air volume delivery • Comfortable handle assures firm grip and ease of use • All internal components can be removed and serviced if required GAITHER RAR VALVE UPGRADE KITS • The Gaither RAR valves are the most powerful inflation valves available - same as used on the popular Bead Bazookas® • 1.5" and 2" available to upgrade your current bead seater • Completely serviceable!! This means that if something should become defective down the road, the seal, valve, spring or all three can be replaced! • Push-button release trigger allows technician to keep both hands on the tank for optimum control during use • Reversible handle allows for both right hand and left hand users based on preference • Each valve includes a barrel for immediate use after installation BEAD SEAT BAND INSTALLER • Uses hydraulic force to install bead seat bands in earthmover tires • 25 tons of hydraulic force to ensure that all bead seat bands are installed effortlessly • The angled plate rests against a large section of the tire, ensuring protection of the bead during installation • WEIGHT: 40 lbs (18.1 kg) EASY-LIFT™ BEAD SEATING STAND • Portable for field service, or can be bolted to the floor • With hub facing out, simply roll mounted tire and wheel assembly to front of stand • Push assembly onto crown – tire and wheel will automatically fall onto center of stand and rest with bead centered on bottom wheel flange • Seat beads by inflating tire to 4 PSI (max.) • Step around stand and easily lift assembly into vertical position • Roll assembly into tire inflation safety cage for final inflation • SIZE: 4"H x 26"W x 27"L • Made of high grade steel HIGH GRADE STEEL 429-11900 PORTABLE IF NEEDED USES HYDRAULIC FORCE 473-36016 473-12942 ASCOT NO. MFG. NO. 473-00020 DESCRIPTION CH-2.0JP Jet Pak Bead Seater Upgrade Device - 2" Port Size 473-00015 CH-1.5JP Jet Pak Bead Seater Upgrade Device - 1.5" Port Size HEAVY DUTY ASCOT NO. MFG. NO. DESCRIPTION 473-12942 473-12941 12941R ASCOT NO. 473-36016 MFG. NO. DESC. 36016 Std. Crown for 8-3/4" Dia. Hubs 12942R 2" RAR Valve Upgrade Kit 1.5" RAR Valve Upgrade Kit 473-36017 ASCOT NO. MFG. NO. DESCRIPTION 429-11900 11900 Bead Seat Band Installer 36017 Large Crown for 11" Euro Hubs WEIGHT 16,000 lb. 12,000 lb.

TIRE & WHEEL SERVICE BEAD SEATING DEVICES Bead Bazooka® Video 473-00103 • Smaller and more powerful than previous designs • Serviceable/Replaceable 2’’ RAR valve • Utilizes ultra-compact design • Anti-corrosion interior tank coating • Perfect for motorcycle, cars, or light commercial vehicle tire service (3L2) • Perfect for cars and commercial vehicle tire service (6L2) • Perfect for commercial and light agricultural vehicle tire service (10L2) • Perfect for heavy commercial and agricultural vehicle tire service (14L3) 473-00106 180 473-00110 ASCOT NO. MFG. NO. DESCRIPTION WEIGHT DIMENSIONS INNER DIAMETER 473-00103 GBB3L2 Bead Bazooka 3L2 14 lbs. 23" x 6" x 12" 4 in. 473-00106 GBB6L2 Bead Bazooka 6L2 17 lbs. 23" x 7" x 12" 4.75 in. 473-00110 GBB10L2 Bead Bazooka 10L2 21 lbs. 30" x 6" x 12" 5.5 in. 473-00114 GBB14L3 Bead Bazooka 14L3 14.5 lbs. 27" x 11" x 16" 7.87 in. 473-00114 The Bead Bazooka® 14L3 in use. BEAD BAZOOKA® SPARE PARTS: ASCOT NO. MFG. NO. 473-12913 473-12914 473-12915 473-12916 473-12917 473-12919 473-12920 473-12921 473-12923 473-12930 DESCRIPTION 12913B 12914B 12915B 12916B 12917B 12919B 12920B 12921B 12913B2C 12930M Slotted Double Barrel Pressure Gauge Y-Connect Intake Valve Safety Valve Switch Valve Grip with Trigger Guard Plastic Plug Slotted Double Barrel without Clip F3 Connector 473-12916 473-12923 473-12914 473-12930 473-12917

181 TIRE & WHEEL SERVICE BEAD SEATING DEVICES 38L RAR BEAD BOOSTER® • The 38L RAR Bead Booster® is the most powerful bead seater in our arsenal. It comes equipped with the same RAR valve as the famous Bead Bazooka® giving it the ability to seat almost any tire • Intended for large agricultural and commercial tires, the 38L RAR Bead Booster® and its new 3" valve can handle anything you throw at it • The tank is CE/ASME certified • Lightweight aluminum tank • RAR valve with trigger release • Internal proprietary coating protects against rust • Made in Taiwan 5-GALLON BEAD BOOSTER® • Creates a blast of air used for seating tubeless tire beads • Release valve safety lock prevents inadvertent discharge • Powder-coated inside and out to protect from rust and deterioration caused by moisture • Double Barrel directs the air around the tire for a better “lift” • Safety pop-off valve prevents overloading with too much air pressure 473-00005 ASCOT NO. MFG. NO. 473-00005 GB-5Z 473-00038 ASCOT NO. MFG. NO. 473-00038 DESCRIPTION GB-38L3 38-Liter Bead Booster w/ 3" RAR Valve BEAD BAZOOKA® VALVE REPAIR KITS • Helps the user repair/replace the piston/valve of the Bead Bazooka® • Intended to extend the lifespan of the Bead Bazooka® by making the Bead Bazooka® fully serviceable • This kit saves the user precious time because the repairs can be done quickly and effectively in-house 5-GALLON BEAD BOOSTER® WITH RAR VALVE • The Bead Booster® GB-5MA comes equipped with the same RAR valve as the famous Bead Bazooka® giving it the ability to seat almost any tire • CE/ASME certified tank • New RAR valve with a 2" opening • Internal proprietary coating protects against rust DESCRIPTION 5-Gallon Bead Booster 473-42561 473-32181 473-22181 ASCOT NO. MFG. NO. 473-22181 473-32181 BBVRK DESCRIPTION Bead Bazooka Valve Repair Kit - 2" BBVRK-3 Bead Bazooka Valve Repair Kit - 3" ASCOT NO. MFG. NO. DESCRIPTION 473-42561 GB-5MA 5-Gallon Bead Booster with RAR Valve

TIRE & WHEEL SERVICE BEAD KEEPERS BEADKEEPERS®-ON-A-ROPE • Used to hold the tire in place while mounting the second bead • These tools eliminate the dangerous job of standing on the tire in order to mount it • After the first bead is mounted, simply place two Beadkeepers® on the flange of the wheel and spread them apart as far as possible; Use the Spoon End of the bar to mount a small part of the bead and slide the closest Beadkeeper® to the bar; Repeat this step until the entire second bead is mounted 448-42894 STEEL BEADKEEPER® • THE ORIGINAL BEADKEEPER® • Used to hold a tire bead in place during the mounting process • Eliminates the need to stand on the tire and/or use a second mounting bar 182 448-22894 ASCOT NO. MFG. NO. DESCRIPTION 448-22894 12894 ASCOT NO. MFG. NO. 448-42894 DESCRIPTION 12894-P Beadkeepers-On-A-Rope R YELLOW RUBBER COATED BEADKEEPER® PNEUMATIC BEAD EXPANDERS • Keeps truck tire bead from slipping during mounting of top bead • Rubber coated steel construction • Will not scratch aluminum wheels • Great for hard to mount tires, a must for all super singles • Fits most bias ply passenger tires • Pliable neoprene rubber tube encased in tough nylon cover • Withstands contact with oil, grease, solvents and acid Steel Beadkeeper 448-12894 471-31432 ASCOT NO. MFG. NO. DESCRIPTION 448-12894 12894-C Yellow Rubber Coated Beadkeeper BLUE WIDE MOUTH RUBBER COATED BEADKEEPER® • Wider mouth works on newer, wider Alcoa wheels • Keeps truck tire bead from slipping during mounting of top bead • Rubber coated steel construction • Will not scratch aluminum wheels • Great for hard to mount tires, a must for all super singles ASCOT NO. MFG. NO. MIN./MAX. DIAM. TUBE DIAM. 2-1/4" 3/4" 471-31432 471-31433 448-32894 ASCOT NO. MFG. NO. 448-32894 DESCRIPTION 12894-CW Wide Mouth Blue Rubber Coated Beadkeeper 31432 31433 24"-34" 22"-32" WEIGHT 2.8 lb. .75 lb.

183 TIRE & WHEEL SERVICE CHLORIDE PUMPS DOUBLE DIAPHRAGM CALCIUM CHLORIDE PUMP • No lubrication required • Self-priming, non-stalling, low noise level • Diaphragms have no stress points and less flex for longer life • No gradual loss of pump performance due to wear • Can run dry indefinitely • Protected by an air filter/regulator • 35 gallon per minute free flow 475-30281 475-30280 ASCOT NO. MFG. NO. 475-15103 475-30280 475-30281 15103 A3028 HL-B DESCRIPTION Double Diaphragm Calcium Chloride Pump Replacement 4-Way Valve for Calcium Chloride Pump Replacement Handle for Calcium Chloride Pump 4-Way Valve 475-15103 GRACO CALCIUM CHLORIDE PUMP • 50-gallon (189 liter) per minute capacity; 1 to 1 ratio double diaphragm pump • WEIGHT: 38 lb. (17.2 kg) • Pump only P/N 15091, pump with quick connectors 15090-Q ASCOT NO. MFG. NO. 15090 475-15090 DESCRIPTION GRACO Calcium Chloride Pump 475-15090

TIRE & WHEEL SERVICE WATER ADAPTER SET • Permits fast filling of tires with fluid for ballast • Includes extra bushings for standard bore tire valves and old 9251-type valves • Button valve on side releases air displaced by fluid • Hose connection is 3/4” standard garden hose CLORIDE PUMPS 464-92837 “WONDER PUMP” PNEUMATIC DOUBLE DIAPHRAGM CALCIUM CHLORIDE PUMP ASCOT NO. MFG. NO. 464-92837 WA-1 DESCRIPTION Water Adapter Set • No lubrication required • Self-priming; non-stalling; low noise level • Diaphragms have no stress points and “less flex” for longer life • No gradual loss of pump performance due to wear • Can run dry indefinitely • Protected by an air filter/regulator • 4-WAY VALVE: 1/4 turn reverses the flow - no need to change hoses • 35 gallon per minute free flow VALVE ADAPTER GUN • Will attach to any calcium tire filling pump • 1/2" female pipe thread • Will extract valve core from a standard bore valve or core housing from tractor valve • Securely holds valve core or core housing up in the gun body during the filling or evacuation of liquid from tire 475-18001 184 464-00310 ASCOT NO. MFG. NO. 475-18001 DESCRIPTION 30A Plus 1" Capacity Standard Package ASCOT NO. MFG. NO. 464-00310 310 ASCOT NO. MFG. NO. 464-00134 FP-134 464-00135 FP-135 464-00136 FP-136 464-00137 FP-137 464-00138 FP-138 DESCRIPTION Valve Adapter Gun DESCRIPTION VALVE ADAPTER GUN PARTS Large Bore Core Remover Adapter For Standard Valve O-Ring For FP-135 Standard Valve Core Remover Ejector Union With FP-136 O-Ring 464-00139 FP-139 Gasket 464-00140 FP-140 464-00141 Stem FP-141F 464-00142 FP-142 464-00143 FP-143 464-00144 FP-144 464-00145 FP-145 464-00146 FP-146 Adapter Body Stem Sealing Nut O-Ring For FP-142 Hand Wheel Lock Nut Teflon Gasket ASCOT NO. MFG. NO. DESCRIPTION “WONDER PUMP” PARTS & ACCESSORIES 475-13011 475-13018 475-13019 475-13021 475-13022 30A-11 30A-18 30A-19 30A-21 30A-22 475-13026 30A-26 475-13027 30A-27 475-82515 682515 475-13028 30A-28 475-13029 30A-29 475-13030 30A-30 475-13031 475-13032 475-13033 30A-31 30A-32 30A-33 475-13034 30A-34 475-12532 25A-32 310 Calcium Gun 3/4" Brass Quick Coupler-Hose Saver 3/4" Brass Plug - Hose Saver (Needed for 30A-18) 1/2" Brass Quick Coupler - Calcium Gun 1/2" Brass Plug - Calcium Gun (Needed for 30A-21) 1/8" Back Mount Air Gauge - 0-100 PSI 2-1/2" Dia. S.S. 1/4" Back Mount Press/Vac Gauge - 30/0/150 Glycerin Filled Extra Large Exhaust Muffler 3/4" Brass 4-Way Directional Valve w/ O-Ring Seals w/ Handle Handle for 30A-28 10' Supply Hose (3/4" x 1" MPT Ends) 300 PSI - Wingfoot 15' Fill/Evac Hose (3/4" x 1/2" MPT Ends) 300 PSI - Wingfoot PVC Suction Bypass Hose for Silver Pump 1" FPT Stainless Steel Strainer for 30A-30 Prior to 2002 3/4" FPT Stainless Steel Strainer for Current 30A-Plus PVC Bypass Hose for Black Pump

185 TIRE & WHEEL SERVICE MOUNT/DEMOUNT TOOLS GOLDEN TOOL TUBELESS TRUCK TIRE MOUNT/DEMOUNT TOOL • Demounts most tubeless tires in 8 seconds with ease - remount them in 20 seconds with equal ease - all without the need to lift tire and rim to remove rear bead • Demounts/mounts 17.5" to 44.5" tires • APPLICATIONS: Use on tubeless truck tires including super single/duplex tires, radial and bias • For Dayton-type wheels (centerless) and Budd type disc wheels • Eliminates the need to lift tire and rim to remove the bottom bead, preventing possible strain or even serious injury MADE IN THE USA 448-00101 ASCOT NO. MFG. NO. DESCRIPTION 448-01100 TNT-B/L Bead Lock 448-00202 448-00301 GAITHER’S BEAD SAVER SYSTEM 448-00201 ASCOT NO. MFG. NO. 448-00100 448-00101 448-00200 448-00201 448-00202 448-00301 448-00108 448-00109 448-00110 448-00111 TNT-100 TNT-100-1 TNT-200 TNT-200D TNT200M TNT-300-1 TNT-100-8 TNT-100-9 TNT-100-11 DESCRIPTION Tire Mount/Demout Tool Complete Demount Tool Only (17.5-31.5) Super Single Tire Mount/Demount Tool Super Demount Tool (17.5-44.5) Single Mount Tool New 445 Super Single Demount Tool (17.5-X1) Roll Pin Tine Roller TNT-100-10 Main Roller Roller Pin GAITHER SUPER SLICK'EM® • Should be applied to all tires before being mounted or before deflation if being dismounted • Super Slick’em® is a special non-water based lubricant that penetrates and aids in breaking the tire bead from the wheel by eating away rust and grease. Because it does not contain water, Super Slick’em® will not freeze or cause rust to form • Super Slick’em® 12904 INCLUDES: 4-1 gallon (3.8 liter) containers and 1 applicator bottle ASCOT NO. MFG. NO. 421-12904 G12904 DESCRIPTION Gaither Super Slick'em 421-12904 • By using simple principles of leverage, the Bead Saver System actually works with tire and rim to do the work for you • Safest, fastest, easiest way ever invented to change tubeless truck tires • Guaranteed not to damage tire beads ASCOT NO. MFG. NO. DESCRIPTION 448-12880 12880 Bead Saver System TUBELESS TRUCK TIRE DEMOUNT TOOL • High Quality, economical price • Nylon rollers • 3-Step demount of 22.5 and 24.5 tires • Parts Available ASCOT NO. MFG. NO. 448-00400 DESCRIP EZT-100D Tubeles BL-100 BEAD LOCK • Helps prevent bead damage • Large roller directs bead into drop center, making tire mounting easier • Prevent damage to rims • Tool will not slip or dislodge during the mounting process 448-01100 448-00400 GAITHER J1™ MOUNT/ DEMOUNT TOOL • 2-piece system that mounts and dismounts all standard 19.5", 22.5" and 24.5" tubeless tires up to a 315/80R22.5, including those mounted on aluminum wheels • Differs from the original system in that each process is done completely while the tire is flat on the ground • The first bead is dismounted with the clevis & crook/spoon end • The second bead is dismounted with the J1™ end without picking the tire up • The first bead can be mounted with the J1™ end • The second bead is mounted with the spoon end • Two Beadkeepers® can be used to assist with mounting ASCOT NO. MFG. NO. DESCRIPTION 448-00001 J1 448-00001 Mount/Demount Tool

TIRE & WHEEL SERVICE MOUNT/DEMOUNT TOOLS GOLDEN BUDDY TIRE CHANGING SYSTEM • Mount and demount tool assemblies for 22.5 & 24.5 tires/wheels • Heavy duty steel construction ensures long life • Nylon rollers protect the bead • Bead holder • WEIGHT: 32 lb. (14.5 kg) • Sold as a complete set EASY BUDDY TIRE DEMOUNT TOOL • Mount and dismount tire assemblies for 22.5 and 24.5 tires/ wheels • Easy-to-follow instructions • WEIGHT: 35 lb. (16 kg) • Includes top bead removal tool and bottom bead removal tool • Includes Rim Protector to prevent rim scarring 186 448-12320 NYLON ROLLERS PROTECT BEAD INCLUDES RIM PROTECTOR 448-71000 ASCOT NO. MFG. NO. DESCRIPTION 448-12320 448-22320 448-32320 71050 71051 71052 Golden Buddy Tire Mount/Demount Tool Set Golden Buddy Dismount Assembly Golden Buddy Mount Tool Assembly ASCOT NO. MFG. NO. DESCRIPTION 448-71000 71000 Easy Buddy Tire Demount Tool STEEL TRUCK BEAD HOLDER • Clamps securely to the wheel to prevent tire from “walking” • Eliminates the use of vise grips which can damage wheels • For use with automatic tire changers and/or manual tire changing tools • Heavy duty steel construction ASCOT NO. MFG. NO. DESCRIPTION 448-00010 BJ-BP10 HEAVY DUTY STEEL Steel Truck Bead Holder

187 TIRE & WHEEL SERVICE MOUNT/DEMOUNT TOOLS TRUCK TIRE DEMOUNT & MOUNTING TOOL KITS TYR-X TRUCK TIRE DEMOUNT SYSTEM • A safe, quick, and reliable tire demounting tool that makes tir demounting a simple process • The pivot hooks ensure easy and positive operation and its design eliminates aggressive stretching of the tire bead • One of the easiest and fastest manual truck tire demounting tool on the market • Works on standard truck tires (22.5-24.5) and can be used for the first bead of super singles or double wide truck tires • WEIGHT: 17 lb. (8 kg) 402-20397 402-20396 402-20406 402-90518 ESC100 Kit ASCOT NO. 402-90518 402-90519 MFG. NO. 90518-100-KIT 90518-200-KIT 402-20430 402-90519 ESC200 Kit DESCRIPTION ESC100 Kit - INCLUDES: 90518-100-1 Demounting Tool, 90518-200M Mounting Tool & 70141 Bead Holder ESC200 Kit - INCLUDES: 90518-200-1 Demounting Tool, 90518-200M Mounting Tool & 70141 Bead Holder HANDHELD TIRE CHANGING KIT • Includes 20408 (Univ demount tool), 204 bar), 20397 (Bead depr wedge), and 20406 (Bead Holder • Demounts anything with a dr center - great for 17.5 Must have for servic work • Demounts 19 seconds after bead is br ASCOT NO. MFG. NO. 402-20396 20396 402-20397 402-20406 402-20430 20397 20406 20430 DESCRIPTION Demount Tool, Truck Tire, "Tyr-X", All In One Demount System Bead Wedge (Puts Tire In Drop Center) UNIVERSAL IMP DRIVEN DEMOUNTER • Safe, Simple, Fast, E the Most Universal T the Market • Works as a Hand-Held T Machine and shines wher fall short • Tackles the Har Hubs and Grader Tir on ALL Tire sizes from 10” A and Up • Great for A One-Piece Grader, L Back Hoe Tires • Comes with 1 1/ Socket & Model 203 ASCOT NO. 402-20414 MFG. NO. 20414-A DESCRIPTION Handheld Tire Changing Kit For Commercial Truck 17.5 - 24.5 ASCOT NO. 402-20408 MFG. NO 20408

TIRE & WHEEL SERVICE R MOUNT/DEMOUNT TOOLS BLUE COBRA™ TRUCK TIRE DEMOUNT TOOL 402-35440 • Ergonomic shaped steel handle with no-slip grip for optimum leverage • APPLICATIONS: Change nearly any 20", 22.5" and 24.5" tube-type and tubeless truck tires, up to a 13" wide one-piece wheel ASCOT NO. MFG. NO. 402-35440 35440 LENGTH 54" WEIGHT 22 lb. SUPER SERPENT DEMOUNT TOOL • At only 5-1/2 pounds, this unique, lightweight demount tool for super singles can be lugged around on a fingertip • Delivers incredible leverage right where it’s needed 402-02006 ASCOT NO. MFG. NO. 402-02006 T2006 TIRE MOUNT TOOL • Demounts both beads on most truck tires with the need for lifting the tir • Hea ASCOT NO. MFG. NO. 402-02001 T2001 LENGTH 39" STOCK 3/4" WEIGHT 6.5 lb. GENERAL PURPOSE TIRE IRONS TIRE SPOONS • General purpose tire irons for all mounting and demounting needs • APPLICATIONS: Use 18" and 24" spoons to mount or demount passenger car, motorcycle, ATV and light truck tires; 30" spoons provide enough strength and leverage to work on large truck, bus, off-road vehicle, tractor and aircraft tires LENGTH 37" STOCK 3/4" WEIGHT 5.5 lb. 188 HEAVY DUTY & DURABLE TIRE MOUNT TOOL ASCOT NO. MFG. NO. • Wing shaped designed to stop against rim, remove itself from between rim and bead • Small end gets under stretched bead for last pull 402-02002 ASCOT NO. MFG. NO. 402-02002 T2002 LENGTH 38" STOCK 11/16" WEIGHT 4 lb. 402-32101 402-32119 402-33022 402-33219 402-33238 402-02100 402-02101 402-02102 402-33020 402-33024 SUPER SERPENT MOUNT TOOL • It may seem funny looking, but every inch of this innovative design is purely serious • Delivers Twice the leverage of any “Straight-type” tire mounting tool 402-02005 ASCOT NO. MFG. NO. 402-02005 T2005 LENGTH 37" STOCK 3/4" WEIGHT 6.6 lb. 402-31820 402-32102 402-32120 402-32420 402-33021 402-33052 402-33062 402-33220 402-33239 T1X T19 LENGTH STOCK WEIGHT 33022 T19A T38 T21R T21F A. STRAIGHT 18" 24" 30" 30" 30" T21HD 33020 33024 31820 T2X T20 B. DROP-CENTER 18" 24" 30" 30" 30" 32420 33021 33052 33062 T20A T39 C. CURVED 18" 18" 24" 24" 30" 30" 30" 30" 30" 11/16" 11/16" 3/4" 11/16" 7/8" 11/16" 11/16" 7/8" 11/16" 3/4" 11/16" 11/16" 11/16" 11/16" 11/16" 3/4" 7/8" 11/16" 7/8" 1.8 lb. 2.5 lb. 3.4 lb. 3 lb. 4.8 lb. 1.8 lb. 2.5 lb. 4.5 lb. 3.1 lb. 3.4 lb. 1.8 lb. 1.8 lb. 2.4 lb. 2.5 lb. 3.1 lb. 3.1 lb. 3.4 lb. 3.1 lb. 4.5 lb. A B C

189 TIRE & WHEEL SERVICE MOUNT/DEMOUNT TOOLS NINETEEN-FIVE™ TIRE MOUNTING & DEMOUNTING TOOL SET FOR 19.5" TRUCK TIRES • New tire bar uniquely designed to work on hub side of wheel, where hub protrudes above rim • Specially designed ends manipulate tire with less effort • Forged from high-grade carbon steel and heat-treated for longlasting strength and durability • APPLICATIONS: Specially designed Bead Holder to hold bead on 19.5" aluminum wheels • Solid brass Bead Holder for steel wheels • Aluminum Wheel Protector - thick leather pad helps protect rims from marring and scratching ASCOT NO. MFG. NO. 402-33195 472-31710 472-31810 402-33196 402-33199 33195 31710 31810 33196 33199 DESCRIPTION LENGTH WEIGHT NINETEEN-FIVE™ TIRE MOUNTING & DEMOUNTING TOOL SET Nineteen-Five™ Tire Mounting and Demounting Set. INCLUDES: 31710, 31810, 33196, 33199 Bead Holder for Steel Wheels - Solid Brass Aluminum Wheel Protector - Leather Bead Holder for 19.5" Aluminum Wheels Tire Mounting/ Demounting Tool 7-1/2" 38" 3 lb. 2.5 lb. 402-33199 4-1/2" 6" 2.5 lb. 3.4 lb. 402-33196 ASCOT NO. MFG. NO. 402-34950 34950 LENGTH 58" WEIGHT 10 lb. 402-34950 EASY AND SAFE TO USE LIFT ALL SIZES & TYPES OF TIRES IRONMAN™ ERGONOMIC WHEEL LIFTING BAR 472-31810 • Easily and safely lift heavy, awkward truck tire and wheel assemblies • Extremely useful in outdoor conditions when truck tire and wheel assemblies can become wet & slippery • Protect your workers and yourself: reduce injuries & claims, keep insurance premiums down • Specially designed forged ends work from either side of the wheel assembly as it lays flat • APPLICATIONS: Lift all sizes and types of small and large heavy truck wheels: Standard sizes including 22.5" and 24.5" wheels, plus European (which have 1" lug holes), Super Wide and even the Super Single (a 340 lb. assembly) size 472-31710 R BEAD HOLDER • Holds the bead in place against the wheel when mounting the tire on the wheel • 31713 Bead Holder works on Super Singles and Super Wides 472-31710 ASCOT NO. MFG. NO. MATERIAL STOCK WEIGHT 472-31710 472-31713 31710 31713 Solid Brass 1.4 lb. 1.8 lb. Aluminum Bead Holder - Works on Super Singles TRUCK TIRE CHANGING STAND • APPLICATIONS: Handles wheels or open rims 16.5" to 24" • Double-slide adjustment with locking device prevents twisting so it stays aligned with the wheel or rim • Ideal height for driving off beads or demounting tire 472-31713 479-36115 ALUMINUM WHEEL PROTECTOR • Protects wheel rims from damage • U.S. Patent No. 6,991,018 472-31810 ASCOT NO. MFG. NO. WEIGHT 472-31810 31810 12 lb. (5.4 kg) ASCOT NO. MFG. NO. 479-36115 T115 DESCRIPTION Truck Tire Changing Stand

TIRE & WHEEL SERVICE R MOUNT/DEMOUNT TOOLS CLASSIC TUBELESS TIRE IRON • Ken-Tool’s patented designs offer one-piece construction and assure long life for many tire changing applications • Tip ends insert easily and will not cut or rip bead or sidewall • These designs make it easier to mount and demount tires without changing the way the tool is used • MOUNT END: Precision-forged knob grips rim. Tip designs won’t slip during tire mounting. Special curve design always grabs the bead edge • DEMOUNT END: Precision-forged angled tip slides between bead and rim easily. Forged design won’t slip when demounting the second bead 402-34645 ASCOT NO. MFG. NO. 402-34645 402-34649 402-34645C T45A T45AS T45AC LENGTH 37" 52" 37" TUBELESS TIRE IRON SETS • Sets provide all irons necessary for a variety of tire changing applications • APPLICATIONS: Use C bar with the B extension bar for easier use on large, wide-base truck tires; Use on standard and large truck tires, including industrial, farm, buses and tractors ASCOT NO. MFG. NO. DESCR. 402-46000 T46 Tire Iron Set. INCLUDES: T46A, T46B, T46C 402-46001 T46A Med. Duty Mount/ Demount Iron 402-46002 T46B Mount/ Demount Iron 402-46003 T46C Offset Bar For Deep Well Tires HEAVY 402-47000 T47 Tire Iron Set. INCLUDES: T47A, T47B, T47C 402-47001 T47A Ultra Duty Mount/ Demount Iron 402-46003 402-47002 T47B Mount/ Demount Iron 402-47003 T47C Offset Bar For Deep Well Tires 49-1/2" 1" 27" 1" 11 lb. 6.66 lb. ASCOT NO. MFG. NO. 402-04300 402-04301 402-04401 T43C T43D T44 LENGTH STOCK WEIGHT 7/8" 21" 30" 31" 7/8" 7/8" 3.1 lb. 4.5 lb. 5.3 lb. — 1" 29 lb. 52" 1" 11 lb. 402-04300 402-04301 402-04401 36" 22" 3/4" 3/4" 4.5 lb. 3 lb. 402-46002 402-46001 EUROPEAN STYLE TOOLS • APPLICATIONS: Use on car, motorcycle, truck and agricultural tires • Designed for mounting and demounting tires • Best if used in pairs LENGTH STOCK WEIGHT ADAPTER PLUGS — 3/4" 36" 3/4" 12 lb. ASCOT NO. MFG. NO. 402-04311 T43A 4.5 lb. 15" 402-04311 LENGTH STOCK 3/4" WEIGHT 1.8 lb. STOCK 3/4" 7/8" 3/4" WEIGHT 4.6 lb. 8.25 lb. 4.6 lb. TIP ENDS INSERT EASILY Design based on popular European styles. Extended length of the flat curved sliding surface provides comparable mounting ability of much longer traditional tire irons. TIRE IRONS - SMALL TIRE PRECISIONFORGED ENDS • Pro tire changing tools for small tires • APPLICATIONS: Ideal for mounting and demounting motorcycle, ATV, lawn, golf cart and small tires by hand • Rounded ends will not pinch tube 402-00050 402-00080 402-00060 402-00180 402-00900 ASCOT NO. MFG. NO. 402-00050 402-00060 402-00080 402-00160 402-00900 402-01160 402-01900 T5 T6A T8 T16A T9A T16C T9C LENGTH STOCK .8 Lbs 5/8" 16" 16-1/2" 16" 16" 9" 1.5 lb. .8 Lbs 7/16" 7/16" .7 lb. .4 lb. 2 Piece Set. INCLUDES: (2) T16A 16" Bars 2 Piece Set. INCLUDES: (2) T9A 9" Bars MOTORCYCLE/SMALL WHEEL TIRE TOOL WEIGHT 190

191 TIRE & WHEEL SERVICE LOCK RING TOOLS LOCK RING TOOL • APPLICATIONS: Removes continuous side rings on two-piece truck rims 402-32128 402-32123 ASCOT NO. MFG. NO. 402-32128 T27A LENGTH 18" DIAMETER 11/16" WEIGHT 1.8 lb. HEAVY DUTY LOCK RING TOOL • APPLICATIONS: Use for multi-piece wheels, especially hub type 402-34648 ASCOT NO. MFG. NO. 402-34648 T48A LENGTH 37" DIAMETER 3/4" INDUSTRIAL WHEEL LOCK RING TOOL SET • Helps prevent injury, easier to keep hands safely outside of press cage • Bright orange color helps prevent lost tools • Forged from high-grade carbon steel and heattreated for long lasting strength and durability • SET INCLUDES: #3130 Mount/Demount Tool: Demount end lifts split ring progressively around wheel until fully demounted, mount end used to mount split ring; #3132 Demount Prep Tool: Separator end separates split ring from solid flange ring to form gap, pry-out end reaches behind slotted end of split ring to pry in out and over the flange of the wheel BRIGHT ORANGE COLOR 402-32129 HIGH GRADE CARBON STEEL ASCOT NO. MFG. NO. 402-32130 402-32131 32130 32131 DESCRIPTION LENGTH INDUSTRIAL WHEEL LOCK RING TOOL SET PARTS Mount/Demount Tool Demount Prep Tool 15-3/4" 15-1/2" ASCOT NO. MFG. NO. 402-32129 32129 DESCRIPTION 2 Pc. Industrial Wheel Lock Ring Set WEIGHT 402-32127 1.8 lb. 1.5 lb. ASCOT NO. MFG. NO. 402-32127 T27 LENGTH 18" DIAMETER 11/16" WEIGHT 1.8 lb. ASCOT NO. MFG. NO. 402-33224 T23B WEIGHT 4.6 lb. ASCOT NO. MFG. NO. 402-32123 402-33223 T23 T23A LENGTH 24" 30" DIAMETER 11/16" 11/16" WEIGHT 2.4 lb. 3.1 lb. TRUCK LOCK RING REMOVER • APPLICATIONS: Designed for small diameter wheels R COMBINATION RIM/RING TOOL • Flat tapered end • APPLICATIONS: Ideal for all around ring and rim work 402-33224 LENGTH 23-1/2" DIAMETER 11/16" WEIGHT 2.4 lb. RIM LOCK TOOL • APPLICATIONS: For servicing wide base rims 402-32125 ASCOT NO. MFG. NO. 402-32125 T25 LENGTH 18" DIAMETER 5/8" WEIGHT 1.8 lb. SPECIAL LOCK RING TOOL • Long tapered curved end • APPLICATIONS: For continuous side rings

TIRE & WHEEL SERVICE HEAVY DUTY HAMMERS TRUSTY COOK DEAD BLOW SLEDGE HAMMER LINE • With a welded steel handle, shot-filled canister, and hotcast polyurethane, this model is a go-to for mechanics • Compact, versatile, sledge hammer — dead blow, no-bounce, striking force • Ideal for one-handed use in confined spaces • Oil and chemical resistant – Perfect for the automotive garage setting • No-Slip Grip – Comfortable, durable grip for a strong hold in all conditions • Perfect for wheel weight installation • Made In USA 428-00014 428-00001 428-00007 192 428-00010 ASCOT NO. 428-00001 428-00007 428-00010 428-00014 MFG. NO. DESCRIPTION MODEL S1 MODEL 7 MODEL 10 MODEL 14 18 Oz. Slimline Soft Face Sledge Dead Blow Hammer 5.5 Lb. Soft Face Sledge Dead Blow Hammer 9 Lb. Soft Face Sledge Dead Blow Hammer 12 Lb. Soft Face Sledge Dead Blow Hammer WEIGHT 18 Oz. 5.5 lbs. 9 lbs. 12 lbs. FACE DIAMETER 1-1/4” 2-3/4” 2-3/4” 3.25” HEAD LENGTH 4” 7” 7” 8” OVERALL LENGTH 10-5/8” 20” 30” 36”

193 TIRE & WHEEL SERVICE HEAVY DUTY HAMMERS WOODEN HANDLE HAMMERS • Used for mounting and demounting tires • APPLICATIONS: Makes tire changing easier for passenger car, truck, bus, farm tractor and aircraft tires FIBERGLASS HANDLE HAMMERS R 425-35321 425-35105 425-35421 425-35423 425-35325 425-35323 425-35425 ASCOT NO. MFG. NO. HANDLE NO. 425-35321 425-35323 425-35325 425-35105 T34 T35 T36 T34RH T11CH T11CH T11CH LENGTH 17" 16-1/2" 16-1/2" WEIGHT 4.8 lb. 5.5 lb. 5.8 lb. ASCOT NO. MFG. NO. HANDLE NO. LENGTH HEAD WEIGHT WEIGHT 425-35421 425-35423 425-35425 TG34 TG35 TG36 Rubberhead Replacement TG11CH TG11CH TG11CH 18" 18" 18" 5.5 lb. 4.8 lb. 5.8 lb. 6 lb. 6.6 lb. 6 lb. TIRE BEAD BREAKING HAMMERS • A unique tire & wheel service hammer used for separating tires from wheel rims • Patented heat treatment process ensures uniform hardness on all faces including edges, thus preventing mushrooming of head & accidents due to chipping • Ergonomic rubber grip handle absorbs vibrations & reduces fatigue • Head is induction case hardened for extended life • 5 lb. & 10 lb. hammers available ASCOT NO. MFG. NO. 429-10005 429-10010 DESCRIPTION AS-BBH5 AS-BBH10 5 lb. Bead Breaker Hammer 10 lb. Bead Breaker Hammer 429-10005 429-10010

TIRE & WHEEL SERVICE R HAMMERS & HANDLES WOODEN HANDLE HAMMERS • Designed for tire service in variety of sizes DUCK BILLED BEAD BREAKING WEDGES - W 424-35329 426-35311 ASCOT NO. MFG. NO. HANDLE NO. 426-35311 426-35317 T11B T33R FIBER HAMMERS T11BH T11HN LENGTH 14-1/2" 14" 426-35317 WEIGHT 4.5 lb. 2.3 lb. ASCOT NO. MFG. NO. HANDLE NO. 424-35327 424-35329 T11D T11E T11DH T11EH LENGTH 17" 30" WEIGHT 4.8 lb. 9.2 lb. 194 DUCK BILLED BEAD BREAKING WEDGES-FIBERGL ASCOT NO. MFG. NO. HANDLE NO. 426-35411 426-35417 TG11B TG33R TG11BH TG31H LENGTH 16" 16" WEIGHT 4.8 lb. 2.5 lb. ASCOT NO. MFG. NO. HANDLE NO. 424-35427 424-35429 TG11D TG11E TG11DH TG11EH LENGTH 18" 32" WEIGHT 4.8 lb. 9.1 lb. DOUBLE FACED SLEDGE HAMMER DUCK BILLED POLYMER HANDLED BEAD BREAKING WEDGE • High carbon steel, hea polished face • Top gr • Hump design prevents tool fr rim and bead • Breaks bead with lit no prying • New polymer handle design with fiberglass core 424-35460 428-37304 ASCOT NO. MFG. NO. HANDLE NO. 424-35460 429-35230 T11K T11KH ASCOT NO. MFG. NO. 428-37302 428-37304 428-37308 428-37310 428-37312 428-37316 428-37320 84H-2 84H-4 84H-8 84H-10 84H-12 84H-16 84H-20 HANDLE LENGTH. 15" 15" 32" 36" 36" 36" 36" FACE 1-1/2" 1-3/4" 2" 2-1/8" 2-1/8" 2-3/8" 3" EYE SIZE 3/4" x 1" 3/4" x 1" 1" x 1-3/8" 1" x 1-3/8" 1" x 1-3/8" 1" x 1-3/8" WEIGHT 2 lb. 4 lb. 8 lb. 10 lb. 12 lb. 16 lb. 2" x 1-1/2" 20 lb. T32 17" T11KH LENGTH 32" WEIGHT 10.5 lb. Replacement Handle for T11K POLYMER HANDLE DESIGN 2 LB. RUBBER MALLE • Rubber head prevents marring surfaces 426-35310 ASCOT NO. MFG. NO. HANDLE LENGTH 426-35310 WEIGHT 2 lb. RUBBER HEAD

195 TIRE & WHEEL SERVICE HAMMERS & HANDLES CROSS-PEIN/BLACKSMITH HAMMER 426-37103 ASCOT NO. MFG. NO. 426-37103 85H-3 HANDLE LENGTH. 16" FACE 1-5/8" EYE SIZE 1" x 1-3/4" WEIGHT 3 lb. R FIBERGLASS REPLACEMENT HANDLES ASCOT NO. MFG. NO. 429-35206 429-35211 429-35219 429-35218 429-35832 TG31H TG11BH TG11CH TG11DH TG11EH FOR HAMMER NO. TG11R, TG31, TG33R TG11B TG11C, TG34, TG35,TG36 TG11D TG11E HICKORY REPLACEMENT HANDLES NEW ENGLAND PATTERN HANDDRILLING HAMMERS 426-37003 ASCOT NO. MFG. NO. 426-37003 426-37004 80H-3 80H-4 TIRE KNOCKER 426-35110 ASCOT NO. MFG. NO. HANDLE LENGTH. 426-35110 35110 18" WEIGHT .7 lb. HANDLE LENGTH. 10-1/2" 10-1/2" FACE 1-1/2" 1-5/8" EYE SIZE 1"x 3/4" 1"x 3/4" WEIGHT 3 lb. 4 lb. MILWAUKEE TOOL 28 OZ. DEAD BLOW HAMMER • Provides maximum impact and the most durable handle • Delivers the highest impact with minimal effort when swinging • Steel reinforced handle core • Durable handle is also resistant to peeling when exposed to solvents • Precision balanced design, paired with the overmold handle and anti-slip grip offers more control • Lifetime guarantee PROFESSIONAL DEAD BLOW HAMMERS ASCOT NO. MFG. NO. 426-29150 426-35332 ASCOT NO. MFG. NO. 426-35332 426-35333 426-35334 426-35337 TG332 TG333 TG334 TG337 DESCRIPTION 2 lb. Head 3 lb. Head 4 lb. Head Steel Face/Soft Face ALUMINUM REPLACEMENT HANDLES ASCOT NO. MFG. NO. 429-35529 T11AH FOR HAMMER NO. T11E, TG11E LENGTH WEIGHT 4.3 lb. 32" 426-35337 LENGTH 13-1/2" 14-1/2" 15-1/2" 13-1/2" WEIGHT 1.9 lb. 2.7 lb. 3.4 lb. 2.2 lb. DESCRIPTION 48-22-9150 Milwaukee Tool 28 Oz. Dead Blow Hammer ASCOT NO. MFG. NO. 429-35111 429-35113 429-35119 429-35127 429-35129 T11BH T11HN T11CH T11DH T11EH FOR HAMMER NO. T11B T11R, T31, T33R T11C, T34, T35, T36 T11D T11E LENGTH WEIGHT .75 lb. .75 lb. .75 lb. .75 lb. 1.2 lb. 15" 15" 17" 17" 30" LENGTH WEIGHT 1 lb. 16" 16" 18" 18" 32" 1.3 lb. 2.5 lb. 1.2 lb. 2.3 lb. 426-29150 32" FIBERGLASS REPLACEMENT HAMMER HANDLE • Handles are constructed with a solid core which has thousands of fiberglass strands • Unique resin makes it super strong • Allweather, chemical and insect-resistant • Ergonomic non-slip grips for slippery conditions • Replacement adapters available ASCOT NO. MFG. NO. 429-32344 DESCRIPTION AS-32FGH 32" Fiberglass Replacement Hammer Handle

WHEEL WEIGHTS TIRE & WHEEL SERVICE 196 QUALITY ALWAYS WINS Made by American workers Made with American raw materials Made to American OEM standards USE THE ORIGINAL Perfect Equipment is a brand of

197 TIRE & WHEEL SERVICE WRENCHES & LUG WRENCHES R HANDS FREE BUDD NUT WRENCHES KENTOOL PORKCHOP™ WRENCHES • Holds outer cap nut on dual wheels while turning inner nut • Lip fits in hole to secure wrench in place • Fits standard and metric cap nuts 406-30609 ASCOT NO. MFG. NO. 406-30609 406-30610 406-30612 TX9 TX10 TX12 DESCRIPTION SAE Metric Metric SIZE 1-1/2" 35mm 41mm WEIGHT .4 lb. .4 lb. .4 lb. • Eliminates the need for hand and foot aid in separating the nuts, therefore reducing needless injury • Reduces the work and potential for back strain because there is no need to lay down the tire • Will not lose its grip on the outer cap nut so there is no loss of torque, which will give the impact wrench maximum power and efficiency COMBINATION CAP NUT WRENCHES • Combination wrench offers you the versatility of two wrenches in one • Fit one end onto the outer cap nut with other end through center hole • Slides underneath center disc of wheel reducing slipping during nut removals WILL NOT LOSE ITS GRIP TWO WRENCHES IN ONE 406-30620 ASCOT NO. MFG. NO. 406-60300 60300 ASCOT NO. MFG. NO. 406-30620 TX50 DESCRIPTION SAE & Metric SIZE 41mm WEIGHT 1.3 lb. DESCRIPTION Budd Nut Wrench 406-60300 The Budd Nut Wrench in use. BUDD NUT WRENCHES HEAVY DUTY NUT WRENCHES • Heavy duty design will not slip out of position • Rests snugly against the center hole reducing the possibility of rim damage • Great for aluminum rims WILL NOT SLIP OUT OF POSITION 406-30618 ASCOT NO. MFG. NO. 406-30618 406-30619 TX200 TX241 DESCRIPTION SAE Metric SIZE 1-1/2" 41mm WEIGHT 2.6 lb. 2.6 lb. ASCOT NO. MFG. NO. 406-60301 406-60302 406-60303 406-60908 60301 60302 60303 60908 DESCRIPTION Budd Nut Wrench Budd Nut Wrench - 35mm Budd Nut Wrench - 41mm Replaceable Polymer Tail SECURE HOLD • New design won't slip out of rim hole • Will not damage aluminum/ chrome rim • Holds outer cap nut securely • This adaptation of an old product solves the problem of damage to wheels, as well as broken toes and injuries to the feet • Model 60301 has a replaceable polymer covered tail that locks the tool securely in place 406-60 406-60303

TIRE & WHEEL SERVICE R WRENCHES & LUG WRENCHES HEAVY DUTY TRUCK WRENCHES • Use for off-the-road Budd-type wheels • Use TR11 handle 405-34401 ASCOT NO. MFG. NO. 405-34401 402-34402 TR10 TR11 POWER WRENCH • Designed for dual nut systems • Has 13/16" square end to hold inner nut, with a 1-1/2" hex drive to spin outer nut off FOR DUAL NUT SYSTEMS 405-32501 405-32502 405-32504 405-32503 405-32505 405-32506 405-32509 405-32508 406-34547 405-32551 405-32552 405-32553 405-32556 405-32557 TR1 TR2 TR2X TR3 TR3A TR3X TR9 TR98 TRM1 TRM2 TRM3 TRM6 TRM7 ASCOT NO. MFG. NO. SOCKET SIZE SAE 1-1/8", 13/16" Square, 1-1/2" 1, 1-1/4", 5/8" Square 15/16", 7/8" 7/8", 1-1/16" 1-1/8", 1-1/16" 1-1/16", 1-3/16" 1-1/4", 1-1/16" 1-1/2", 13/16" Square METRIC 35mm Sq. x 17mm Square 24mm x 33mm 27mm x 30mm 41mm x 21mm Square 33mm x 30mm Square 4.5 lb. 4.4 lb. 4.5 lb. 4.5 lb. 4.5 lb. 4.6 lb. 4.3 lb. 4.5 lb. 4.5 lb. 4.5 lb. 4.5 lb. 4.5 lb. 4.5 lb. WEIGHT LENGTH 29-1/2" 30" STOCK 1-3/4" Hex x 15/16" Square 1-1/4" WEIGHT 12.2 lb. 6.5 lb. DOUBLE END TRUCK WRENCHES • Double end truck wrenches for on-the-road service • Sizes available for all standard lug nuts • Constructed from 1" high quality steel for greatest strength and durability • All will take our standard TR5 (ASCOT Order No. 405-32318) leverage handle • HANDLE HEX OPENING: 3/4" • LENGTH: 16"; WEIGHT: 4-1/2 lb. 402-32508 FOR ONTHE-ROAD SERVICE 198 DUAL WHEEL LUG STUD REMOVER • Special self-tapping splines provide maximum grip to remove stripped lug studs • Use with TR1 and TR98 truck wrenches • Also used with open end wrench • Use with soft-faced hammer SELFTAPPING SPLINES The Budd Wheel Set in use. ASCOT NO. MFG. NO. 404-34543 TR43 404-34545 404-34547 TR44X DESCRIPTION BASIC SET INCLUDES: Power Drive And Two Handles (Solid Bar - 201/2" Long And Tube - 20" Long) BUDD WHEEL SET INCLUDES: Power Drive, One Bar, One Tube Handle, A 3/4" Service Adapter And One 13/16" Square Adapter TR44SW UNIVERSAL SET INCLUDES: Power Drive, One 20-1/2" Bar, One 36" Tube Handle, A 3/4" Service Adapter, A 13/16" Square Adapter, And Six 3/4" Impact Sockets (7/8", 15/16", 1-1/16", 1-1/8", 1-3/16", 1-1/2") ASCOT NO. MFG. NO. 492-30165 30165 492-30165 DESCRIPTION Fits 13/16" Sq. Inner Nut WEIGHT 1 lb. FRONT BACK

199 TIRE & WHEEL SERVICE WRENCHES & LUG WRENCHES STOW & GO™ 4-WAY HD LUG WRENCH • The Stow & Go™ 4-Way HD Lug Wrench folds to save space in your trunk and locks into place for easy use • Push button in center allows wrench to fold after use • Sliding arms give extra leverage for removing lug nuts • Made of heavy duty and durable alloy steel • 17mm, 19mm, 21mm sockets, and 1/2" square drive adaptor to be used with other sockets • 16" in length FOLDS TO SAVE SPACE LUG WRENCHES • Most popular 4-way lug wrench, polished sockets • Welded center construction for strength and durability • Premium grade bar quantity steel R 403-35656 403-35636 ASCOT NO. MFG. NO. 403-35636 35636 DESCRIPTION Stow & Go™ 4-Way HD Lug Wrench 403-35659 HEAVY DUTY TRUCK FOUR-WAY LUG WRENCHES • Drop-forged center • APPLICATIONS: Heavy duty truck, bus, tractor fourway • Center hole for leverage bar • T96 with heavy duty solid center 403-35620 ASCOT NO. MFG. NO. 403-35595 403-35656 403-35657 403-35697 403-35659 ASCOT NO. MFG. NO. LENGTH STOCK 27-1/2" 1" 403-35595 403-35695 403-35696 403-35697 TC95 T95 27-1/2" 1" T96 27-1/2" 1" T95A 27-1/2" 1" 403-35795 TM95 27-1/2" 1" SOCKET SIZE 1-1/2", 13/16" Sq. 1-1/16", 1-1/4", 1-1/2", 13/16" Sq. 1-1/4", 1-1/2", 13/16" Sq., 3/4" Service Arm (will take any standard 3/4" drive socket) 24, 27, 30, 33mm 13.5 lb. 13.5 lb. 403-35661 13.5 lb. 403-35662 403-35663 T62 T63 18" 18" 9/16" 9/16" T61 22" 9/16" WEIGHT 1-1/2", 13/16" Sq., 30, 33mm 14.2 lb. 1-1/16", 1-1/4", 13.8 lb. 403-35620 T9520 20" 405-35690 T59 T90 22" 25" STANDARD 5/8" 3/4" ECONOMY 9/16" T56 T57 LENGTH STOCK PROFESSIONAL 5/8" 5/8" 20" 23" SOCKET SIZE 17, 19, 21, 22mm 3/4", 13/16", 7/8", 15/16" 3/4", 13/16", 7/8", 15/16" 7/8", 15/16", 1", 1-1/16" 3/4", 13/16", 7/8", 17mm 3/4", 13/16", 7/8", 17mm 3/4", 13/16", 7/8", 17mm WEIGHT 4 lb. 4-1/2 lb. 4.5 lb. 7.2 lb. 3.4 lb. 3.8 lb. 3.2 lb. 17, 19, 21, 22mm 3.2 lb.

TIRE & WHEEL SERVICE 6 PC. INFLATABLE AIR WEDGE BAG KIT • Contents : 6 PCS air wedge bag, 27.0 cm x 13.5 cm, 16.5 cm x 15.0 cm, 18.5 cm x 12.0 cm, 3 PCS Pry tool, 1 PCS Nylon bag • Made of nylon material casted with double-sided TPU • Round corners, hard edges, smooth appearance, easy to insert to resist greater tension • Will not damage, wear and contact the object surface • Squeeze pump to inflate • Three sizes of inflatable cushion bags are very suitable for various jobs and applications ASCOT NO. MFG. NO. 319-00033 DESCRIPTION AS-3ALB 6 Pc. Inflatable Air Wedge Bag Kit 402 R MEDIUM TIRE SNAKE • Included with T601 Tire Changer • APPLICATIONS: Designed for wheels from 4" to 13" • Longer length provides greater strength 402-34674 ASCOT NO. MFG. NO. LENGTH STOCK WEIGHT 402-34674 34674 28" LARGE TIRE SNAKE • Included with T600 Tire Changer 402-34678 ASCOT NO. MFG. NO. LENGTH STOCK WEIGHT 402-34678 34678 40" SHARK FIN DUAL WHEEL SEPARATION BAG • The first wheel separation solution for steel, aluminum and chrome wheels • No metal on metal contact • 5000 lb of static pressing force • Works on 15 to 24.5" dual and single wheels and tires on trucks & trailers • Kevlar inner inflation bag is industrial grade and nearly puncture proof • SMALL BUT MIGHTY: Portable, durable, and fast • 3-foot inflation hose • Deflation is controlled with a quick turn of the slotted valve cap • 9.75" x 8" x 3/8" height deflated, 5.5" height when fully inflated • 90 psi max pushing pressure, 150 psi maximum rated pressure ASCOT NO. MFG. NO. 429-36455 34555 DESCRIPTION Shark Fin™ Dual Wheel Separation Bag 3/4" 5.3 lb. 5/8" 2.5 lb. ASCOT NO. MFG. NO. 402-31567 402-31568 T67 T68 LENGTH 17-1/2" 14" SMALL TIRE SNAKE • Included with T600 Tire Changer 34672 22" 5/8" STOCK 9/16" 7/16" WEIGHT 1.8 lb. 1.3 lb. 402-31567 SHOP SERVICE TOOLS WHEEL COVER PULLERS/REPLACERS • Remove wheel covers quickly and easily without gouging or scratching • Rubber head T11RH prevents damage to hubcab and is replaceable 200 R 402-34672 ASCOT NO. MFG. NO. LENGTH STOCK WEIGHT 402-34672 2 lb. PROFESSIONAL 4 PC. PRY BAR SET • Chrome vanadium steel shafts • Injection molded handle • Black oxide finish resists corrosion • Curved blades • Includes ¼” x 8”, 3/8” x 12”, 7/16” x 18” & 7/16” x 24” pry bars • Includes handy storage tray 319-76403 ASCOT NO. MFG. NO. 319-76403 DESCRIPTION AS-876404 Professional 4 Pc. Pry Bar Set

201 TIRE & WHEEL SERVICE SHOP SERVICE TOOLS DUAL WHEEL SEPARATOR • Makes removing stuck or frozen dual steel wheels quick and easy • Ideal for use on nearly any truck, bus, van or trailer with dual steel wheels • Innovative “one-piece” pusher won’t fall apart during use • Forcing screw and pullers have powerful 1-1/8" diameter x 7 threads for years of reliable service • Pusher is ball bearing-driven for near-zero turning resistance • Pusher is heat treated for longlasting strength and durability • Includes two pullers to cover large truck, trailer and smaller light truck dual wheel applications • Use with air or electric impact wrench • Blow molded case R BENCH MOUNT RIM-CLAMP MANUAL TIRE CHANGER • APPLICATIONS: Mounts and demounts a full range of tires on rim diameters from 4" to 12" • Mounts easily to a bench or in any standard, four-position rim-clamp tire changer • Built-in, threefin c with 2" and lar turning in the changer during use • Includes a 22" tir snak SMALL TIRE SNAKE included 441-38600 422-94549 ASCOT NO. MFG. NO. 441-38600 T600 HEIGHT 16.5" FLOOR MOUNT MANUAL TIRE CHANGER ASCOT NO. MFG. NO. DESCRIPTION 422-94549 ASC94549 Dual Wheel Separator • APPLICATIONS: Mounts and demounts a full range of tires on rim diameters from 4" to 15" • Tapered bearing guide positively centers straight shaft hubs of all diameters • Built-in adjustable bead breaker works on rims up to 13" in diameters and 24" in width without disassembly • Includes a 28" tire snake mount/demount tool (Ascot # 402-34674) DUAL WHEEL SEPARATOR • Makes removing stuck or frozen dual steel wheels quick and easy • APPLICATIONS: Ideal for use on nearly any truck, bus, van or trailer that has dual steel wheels • WEIGHT: 6.5" x 9.5" x 2.5", 5.3 lb. • MADE IN USA ASCOT NO. MFG. NO. 441-38601 T601 HEIGHT 441-38601 MADE IN THE USA 422-34549 ASCOT NO. MFG. NO. 422-34549 34549 DESCRIPTION Dual Wheel Separator 32"

TIRE & WHEEL SERVICE SHOP SERVICE TOOLS MANUAL TIRE CHANGING S • APPLICATIONS: For changing small tir and wheels • INCLUDES: to change 4" to 16.5" tires including rim • Rim clamp mechanism • 2 c (for open or hub type wheels and bearing type wheels) • Also includes the CH-4 Mongoose tire tool • Can be moun on a bench, tire stand or tir 441-00220 202 2 Manual Tire Changing wn with ASCOT NO. MFG. NO. 441-00220 441-00230 CH-22 CH-23 HEIGHT WEIGHT Manual Tire Changer 23 lb. Tire Changing Stand 70 lb. TRUCK WHEEL & RIM REMOVAL TOOL • The easiest & quickest way to loosen stubborn, locked up rims • Retire that back-breaking 20 lb sledge that you use to break seized rims apart • Eliminate damaged tire side walls and rims • Fits all standard (22.5 and 24.5) semi truck rims; aluminum or steel • Safe and efficient ASCOT NO. MFG. NO. 422-71650 71650 422-71655 71655 DESCRIPTION RIMWIT - Truck Wheel & Rim Removal Tool - Fits Standard 22.5 & 24.5 Wheels RIMWIT JR- Truck Wheel & Rim Removal Tool - Fits 19.5" Wheels 422-71650

203 TIRE & WHEEL SERVICE WHEEL DOLLIES TRUCK WHEEL DOLLY • Tire/wheel is rotated left or right on tiltable roller pads for perfect stud alignment • Perfect for 8-10 hole Budd type wheels • Removes truck wheels and tires fast and easy • Increases productivity • Reduces manpower needs • Saves time and money - maintenance free • Heavy duty tubular construction lifts 280 lb. • 3" caster wheels roll the truck wheels for effortless removal or replacement ® TIRE DOLLIES • Hea capable of handling 300 pounds • Eas grip handle along with impr arm installa • St alignmen studs • Spring-loaded kick con tire diame 2310 FAST AND EASY 407-70130 407-82312 ASCOT NO. MFG. NO. DESCRIPTION 407-70130 407-70132 70130 TRUCK: 8" Rollers (280 lb. Capacity) 70132 SUPER SINGLE: 14" Rollers (450 lb. Capacity) ASCOT NO. MFG. NO. 407-82310 407-82312 82310 82312 3/4-TON WHEEL DOLLY • For handling of dual wheels and large single wheels • Designed to facilitate the removal and installation of pneumatic tires and wheel assemblies • Handles up to 52” diameter tires and wheels • The frame is constructed from heavy gauge welded tubular steel • Load levelers aid alignment • Carriage arm rollers with self-lubricating bearings • Restraining chain with the unit • 2 swivel ball bearing casters for easy positioning • Wide frame and lifting carriage • Handy tool/ parts tray on frame • The wheel dolly is designed to be used in conjunction with jacks and jacks stands • 2 Year Warranty MADE IN THE USA 22" Narrow Single Tire Handler Dolly 26" Wide Single Tire Handler Dolly 3/4-TON WHEEL DOLLY • Dolly handles any tire diameter and up to 1500 lb. combined tire and wheel weight • Three 4" diameter swivel ball bearing caster wheels provide easy maneuverability and positioning • Travel adjustment on rear locking caster wheel matches lifting arms with spindle angle • 6' chain included to secure wheel assembly to dolly during removal and transport • Quick disconnect push/pull handle provides unobstructed access to hub area • ASSEMBLED IN THE USA DESCRIPTION 407-93766 EASY TO POSITION 407-82320 CAP. ASCOT NO. MFG. NO. 407-93766 HW93766 (TONS) 3/4 LIFT RANGE ARM LENGTH / SPREAD 4" - 9" 23" / 26-1/2" OVERALL SIZE (W X D X H) 39-1/2" x 38-3/4" x 32" WT. (LB.) 118 ASCOT NO. MFG. NO. 407-82320 82320 CAP. (TONS) LIFT TRAVEL 3/4 4-3/4" LIFT ARM SIZE 26" x 24-1/2" PRODUCT SIZE (W X D X H) 43-1/2" x 39-1/2" x 35" WT. (LB.) 175

TIRE & WHEEL SERVICE WHEEL DOLLIES TW2000 TWEEL HANDLER™ • The TW2000 solution is a built-in ratcheting jack with 14˚ of vertical travel • The Tweel Handler’s U-shaped chassis allows you to get close to the work area, with unhindered access to the tire in the cradle • No restraining chains are required, yet the Tweel Handler™ holds virtually any single truck wheel, including wide-based singles • Three heavy-duty ball-bearing wheels mounted under ball-bearing swivel casters make it highly maneuverable SAFERGO TRUCK TIRE DOLLY 407-47110 • This convenient dolly makes manually lifting wheel sets completely unneces slide the rollers underneath the tire and use the jack handle to raise it to the desired height • Use the included Gaither O-LINE-ER to perfectly position the wheel for easy installation • Equipped with a collapsible handle frame making it easy to store and ideal for mobile service • LIFTING CAPACITY: 350 lbs. 204 407-02000 ASCOT NO. MFG. NO. 407-02000 DESCRIPTION TW2000 TW2000 Tweel Handler™ WINNTEC TIRE DOLL HEAVY DUTY TIRE DOLLY • Reduce back injuries • Perfect stud alignment • Perfect for 8 to 10-hole Budd-type wheels • Removes truck wheels and tires fast and easy • Increases productivity • Reduces manpower needs • Saves time and money, maintenance free • Work with tires 23.5" to 43.5" ASCOT NO. MFG. NO. 407-03000 DESCRIPTION BJ-T300A ASCOT NO. DESCRIPTION 407-10400 407-11100 407-11200 Heavy Duty Tire Dolly PARTS AND ACCESSORIES FOR HEAVY DUTY TIRE DOLLY Roller Set Rubber Wheel Deep Groove Ball Bearing ASCOT NO. DESCRIPTION 407-11600 407-11900 407-12000 Pin Lock Rubber Cove Nylon Wheel ASCOT NO. MFG. NO. 491-00101 DESCRIPTION GTO-01TB O-LINE-ER Stud Alignment Tool • 485 lb. capacity allows for use on all commercial truck tire sizes • Longer rollers makes it even easier to handle super single sizes • Wheel position allows tech to lift tire/wheel assembly by pushing down, instead of lifting up • O-LINE-ER and bracket included with new production models (O-LINEER used for lining up stud holes with studs) ASCOT NO. MFG. NO. 407-47110 G471106 DESCRIPTION SAFERGO Truck Tire Dolly 407-47105 407-03000 O-LINE-ER STUD ALIGNMENT TOOL ASCOT NO. MFG. NO. DESCRIPTION 407-47105 G471105HD Winntec Tire Dolly 491-00101

205 TIRE & WHEEL SERVICE SAFETY INFLATION CAGES KEN-TOOL® SAFETY INFLATION CAGES • Constructed of heavy gauge steel welded to a steel base • Guards against blown lock rings, exploding rims and ruptured tire explosions when used properly • These cages meet OSHA safety requirements (29-CFR Part 1910.177) 479-46001 4-BAR 479-46006 479-46011 479-36003 5-BAR 479-36004 2-BAR R 3-BAR 479-46002 ASCOT NO. 479-46001 479-46011 479-36003 479-36004 479-46006 479-46002 479-46005 479-46010 MFG. NO. 36001 36007 T103 T104 36006 36002 36005 36010 ! CAUTION DESCRIPTION 2-Bar Safety Cage 2-Bar Wide Base Safety Cage BASE PLATE 2-BAR SAFETY INFLATION CAGES 7" x 21-1/2" 7" x 27" 3-Bar Safety Cage/Light Truck Cage 3-Bar Safety Cage for Off Road 3-Bar Tire Inflation Cage 4-Bar Safety Cage 3-BAR SAFETY INFLATION CAGES 21-1/2" x 22" 30" x 27" 31.5" x 26" 4-BAR SAFETY INFLATION CAGES 31.5" x 26" 5-Bar Safety Cage 5-Bar Super Magnum 5-BAR SAFETY INFLATION CAGES 41" x 26" 48" x 30" INSIDE HEIGHT 41" 43.5" 30" 65" 43.5" 43.5" 43.5" 41.5" Work safely. Always use an inflation cage when inflating tires. Follow OSHA regulation 29-CFR Part 1910.177 whenever changing tires. 9-46010 INSIDE DIMENSIONS 41" H x 16" W 43.5" H x 20.5" W 30" H x 16" W 65" H x 24" W 43.5" H x 20.5" W 43.5 H x 20.5 W 43.5" H x 20.5" W 41.5" H x 24" W WEIGHT 60 lb. 72 lb. 80 lb. 158 lb. 146 lb. 146 lb. 182 lb. 248 lb.

TIRE & WHEEL SERVICE For Inflation Solutions See Page 282 2-BAR 3-BAR MARTINS SUPPLY SAFETY INFLATION CAGES • A safety inflation cage is mandatory in any shop for tubeless and multi-piece rims and Ascot offers a size and design for all your needs • Constructed of heavy gauge steel welded to a steel base • Guards against blown lock rings, exploding rims and ruptured tire explosions when used properly • These cages meet OSHA safety requirements (29-CFR Part 1910.177) SAFETY INFLATION CAGES 2-BAR Wide Base 206 479-36010 479-36021 4-BAR 479-36011 479-36006 5-BAR 5-BAR 479-36013 HEAVY GAUGE STEEL 479-36002 479-36015 479-36005 ASCOT NO. MFG. NO. 479-36001 479-36011 479-36021 479-36006 479-36013 479-36002 479-36005 479-36015 MIC-2 MIC-2WB MIC-2OSFA MIC-3 MIC-PCR MIC-4 MIC-5 MIC-OTR DESCRIPTION 2-BAR SAFETY INFLATION CAGES Portable 2-Bar Safety Cage Portable 2-Bar Safety Cage (Super Single) 2-Bar One Size Fits All Portable Inflation Cage 3-Bar Safety Cage 3-Bar Passenger-SUV Safety Cage 4-Bar Safety Cage 5-Bar Safety Cage OTR 5-Bar Safety Cage Up to 48” OD X 13” W Up to 48” OD X 21” W Up to 50" OD x 16" W 3-BAR SAFETY INFLATION CAGES Up to 47” OD X 19” W Up to 35” OD X 12.5” W 4-BAR SAFETY INFLATION CAGES Up to 47” OD X 19” W 5-BAR SAFETY INFLATION CAGES Up to 47” OD X 19” W Up to 62” OD X 33” W 41” x 26-1/4” x 57-5/16” 41” x 39-3/8” x 66” 182 lb. 277 lb. 31-5/8” x 26-1/4” x 57-5/16” 147 lb. 22-1/4” x 26-1/4” x 57-5/16” 21” x 28” x 40” 108 lb. 93 lb. 21-1/2” x 16-3/4” x 51” 29” x 16-3/4” x 52” 25-3/4" x 21-1/8" x 57" 69 lb. 78 lb. 59 lb. HANDLES TIRES DIMENSIONS WEIGHT ! CAUTION Work safely. Always use an inflation cage when inflating tires. Follow OSHA regulation 29-CFR Part 1910.177 whenever changing tires.

207 TIRE & WHEEL SERVICE SAFETY INFLATION CAGES MARTINS AUTOMATIC SAFETY INFLATION CAGES The Automatic HD tire inflation cages offer top-of-the-line protection for your employees when inflating truck & bus, agriculture and off-theroad tires. Equipped with locks and safety valve systems on each door, the Automatic HD tire inflation safety cage series exceeds OSHA standard 29 CFR 1910.177 in the U.S. In addition to its sturdiness and safeness, the tire inflation cages offer easiness, accuracy and versatility with a plug & play automatic tire inflator that is equipped with an over pressure system. Before using the product, please read the instructions carefully 6-BAR 479-36016 479-36082 ASCOT NO. 479-36052 479-36078 479-36082 479-36016 MFG. NO. MIC-AUHD-52 MIC-AUHD-78 MIC-AUHD-82 MIC-6HD DESCRIPTION Automatic HD Tire Inflation Cage 52’’ High Pressure Automatic HD tire inflation cage 78’’ Automatic HD tire inflation cage 82’’ Tire Inflation Cage 6-bar HD HANDLES TIRES AUTOMATIC HD TIRE INFLATION CAGES Up to 50" OD x 19" Wide Up to 76" OD x 35" Wide Up to 78" OD x 50" Wide 6-BAR SAFETY INFLATION CAGES Up to 47" OD x 20" Wide 53" x 27" x 57" 291 Lb. 59 1/2" x 28" x 56" 82" x 40" x 78" 84" x 56" x 82" 543 lb. 1110 lb. 1288 lb. DIMENSIONS WEIGHT

TIRE & WHEEL SERVICE For Inflation Solutions See Page 282 BRANICK SAFETY INFLATION CAGES • Constructed of heavy gauge steel welded to a steel base • No-mar wheel protection available • Multiple sizes for passenger and commercial locations • Side mesh option provides complete protection • Arch design for maximum energy displacement • These cages meet OSHA safety requirements (29-CFR Part 1910.177) HEAVY GAUGE STEEL 479-02220 4-BAR 6-BAR 479-02130 2-BAR SAFETY INFLATION CAGES 3-BAR 208 479-02240 479-02260 ASCOT NO. 479-02220 479-02130 479-02240 479-02250 479-02260 MFG. NO. 2220 2130 2240 2250 2260 ! CAUTION DESCRIPTION Portable 2-Bar Safety Cage 3-Bar Passenger/Light Truck Cage 4-Bar Safety Cage with No Mar Coating 5-Bar Safety Inflation Cage 6-Bar Safety Cage MAX. HEIGHT X MAX. TIRE WIDTH 2-BAR SAFETY INFLATION CAGES 54" x 21.5" 3-BAR SAFETY INFLATION CAGES 34" x 21.5" 4-BAR SAFETY INFLATION CAGES 54" x 21.5" 5-BAR SAFETY INFLATION CAGES 54" x 21.5" 6-BAR SAFETY INFLATION CAGES 59" x 29" Work safely. Always use an inflation cage when inflating tires. Follow OSHA regulation 29-CFR Part 1910.177 whenever changing tires. 35" W x 41" D x 62" H 385 lb. 28"W x 35"D x 60"H 230 lb. 28" W x 28" D x 60" H 170 lb. 28" W x 20" D x 40" H 120 lb. 28" W x 17" D x 60" H 76 lb. DIMENSIONS WEIGHT

209 TIRE & WHEEL SERVICE SAFETY INFLATION CAGES ROLLER FOR TIRE INFLATION CAGES • Used to roll the tires easily directly into the inflation cage • Allows an easy access to the tire valve because it is easy to turn the tire to have the valve to any position • For use with all 3-bar, 4-bar & 5-bar inflation cages • Prevent back injuries when handling heavy tires • WEIGHT: 12 lbs. ASCOT NO. MFG. NO. 479-36111 DESCRIPTION MIC-ROLLER Roller for Tire Inflation Cages ALLOWS FOR EASY ACCESS TO TIRE VALVE 479-36111 TIRE CAGE STAND FOR AUTOMATIC INFLATORS • Used to support automatic inflators to tire inflation cages • Reduces movement and allows for faster inflation of tires • Install directly on the top of one of the inflation cage bars with the mounting bracket • WEIGHT: 8 lbs. ALLOWS FOR FASTER ASCOT NO. MFG. NO. 479-36112 DESCRIPTION MW-STAND Tire Cage Stand for Automatic Inflators INFLATION OF TIRES 479-36112 R EZ TIRE ROTATOR FOR INFLATION CAGES • APPLICATIONS: EZ Tire Rotator fits any Ken-Tool 3-Bar, 4-Bar and 5-Bar Inflation Cage, plus many competitive cages • No need to lift or remove rim/wheel assembly from cage when repositioning valve stem for access through the cage tubes • Allows tire tech to easily and quickly rotate rim/wheel assembly inside the safety cage in order to adjust position of valve stem • Reduces handling, back strain and user fatigue; increases safety • Easily installed or moved to another cage - no fastening required • No assembly required; simply place in the center of the cage • Features heavy-duty 2" ball-bearing steel rollers and ¼" thick steel stock for long service • Boxed and UPS shippable • MADE IN USA NO ASSEMBLY REQUIRED MADE IN THE USA ASCOT NO. MFG. NO. 479-36014 T114 DESCRIPTION EZ Tire Rotator for Inflation Cages 479-36014

TIRE & WHEEL SERVICE MISC GAUGES TIRE TREAD DEPTH GAUGES PCD WHEEL BOLT MEASURING TOOL • Can be used to measure a wheel or turned over to measure studs on a vehicle • This wheel rim bolt pattern gauge is made of the best quality plastic material • Lightweight and durable • Quickly measures most common 4, 5, 6, 8 lug bolt patterns, it shows both inch and metric sizes. 454-00190 210 454-00599 454-06763 454-00712 ASCOT NO. MFG. NO. 454-06763 676-3 454-05150 TREAD DEPTH GAUGES DESCRIPTION PCD Wheel Bolt Measuring Tool 454-01420 454-05300 454-01599 454-01410 454-05127 ASCOT NO. MFG. NO. DESCRIPTION 454-00190 454-00599 HT-190L 595 454-00712 454-01420 454-01599 454-05127 454-05150 NS712 HT-1420 599-C 5127 5150 3-Color All-Metal Tread Depth Gauge Tire Tread Depth Gauge. Used To Measure Tire Tread Depth In 1/32" Increments: 0-1" All Metal Tread Depth Gauge Truck Tire Depth Gauge. Calibrated In mm and 1/32nd of Inch. Measures Shoulder Wear and Tread Depth. Durable Metal Construction 3-Color Tread Depth Gauge Red-Yellow-Green Metal indicator bar with black numbers 0-32In 32NDS Truck tread depth gauge with 0.0-1.0" (025mm) range. Measures both tread and shoulder wear. Durable Stainless Steel construction. Measures in mm and 1/32" increments. 454-05131 5131 454-05300 5300 ASCOT NO. MFG. NO. 454-01410 N-1410 DESCRIPTION Off-Highway Tire Tread Depth Gauge. Calibrated With 32nds And MM. Magnified Sight Glass For Easy Readability Large Bore Tread Depth Gauge Tire Tread Depth Gauge w/ Magnifying Lens - Calibrated with 32nds & MM 454-11410

211 TIRE & WHEEL SERVICE MISC GAUGES BRAKE THICKNESS GAUGE • Quickly and easily determine the remaining thickness of a vehicle’s brake pads without removing any wheel components • On the gauge, the colors correspond with the brake pad thickness readings: • 11mm or more - Green, no replacement necessary • 8mm to 10mm - Yellow, suggest replacement soon • 0mm to 8mm - Red, recommend replacement DIGITAL TREAD DEPTH GAUGE • Made from strong carbon fiber composite • Zero setting in any position • Metric, decimal inch and fraction inch toggle • Large LCD display 411-03218 454-00209 ASCOT NO. MFG. NO. 411-03218 DESCRIPTION NS-3218P Brake Thickness Gauge ASCOT NO. MFG. NO. 454-00209 NS209S DESCRIPTION Digital Tread Depth Gauge BRAKE LINING THICKNESS GAUGE • Made of durable metal • Each blade features both SAE and Metric measurements • Clear and accurate depth readings • Color coded brake gauge provides effective identification • THE SET IS DIVIDED INTO 3 COLORS: Red, Yellow and Green • Red 2 mm (.787") Brakes must be serviced • Yellow 4 mm (.1575") Brakes must be serviced • Made in Taiwan RADIAL RUNOUT GAUGE • Measures vehicle vibration sensitivity • Measures out of round condition • EASY TO USE: only 2 adjustments • Pinpoints high or low spots in the tire • Determines accurate centering of tire and wheel mounting 247-33173 411-97840 ASCOT NO. MFG. NO. 411-97840 411-65201 DESCRIPTION BG-97840 3-Piece Brake Lining Thickness Gauge 8-Piece Brake Lining Thickness Gauge B650201 ASCOT NO. MFG. NO. DESCRIPTION 247-33173 64250 Radial Runout Gauge

VALVES & ACCESSORIES VALVES & ACCESSORIES TPMS Tools & Sensors TPMS Accessories & Kits TPMS Tools TPMS Transmitters Aftermarket Accessory Kits Tire Valves Truck & Specialty Valves Valve Caps, Cores & Extensions Special Application Products Large Bore Extensions Valve Hardware Tools Tire Gauges Inflator Gauges

MaxiSYS SOLUTIONS FOR EVERY SHOP IA1000AUTOMATED ADAS CALIBRATION & WHEEL ALIGNMENT SYSTEM FULL Y ROBO TIC FORW ARD-F ACING CALIBRA TIONS VERTICAL ROBOTIC CROSSBAR POSITIONING An all-in-one ADAS calibration, wheel alignment, and advanced diagnostics system featuring robotic target positioning and laser-guided accuracy. Designed for efficiency, precision, and repeatability, it’s the ideal solution for modern service centers. DIGITAL TARGET MONITORS COMPATIBLE WITH BOTH TRADITIONAL PHYSICAL LDW TARGETS AND OPTIONAL 27” DIGITAL MONITORS HORIZONTAL ROBOTIC CROSSBAR POSITIONING & LDW TARGET SPREAD AUTEL ACADEMY ADAS TRAINING IS NOW ASE & I-CAR ACCREDITED IA900 ADAS CALIBRATION & WHEEL ALIGNMENT SYSTEM DIAGNOS TICS + WHEEL ALIGNMENT + ADV ANCED ADAS All systems health check, digital vehicle inspection, 3D wheel alignment, and step-by-step ADAS calibration instructions in a single system, investment, and workflow. MAXISYS ULTRAADAS IA700 MODULAR ADAS Disassembles into 6 primary parts in less than 90 seconds for easy transport MAXISYS MS909 1.855.288.3587 USSUPPORT@AUTEL.COM AUTEL ACADEMY TRAINING autel.us/academy WEB: AUTEL.US FOLLOW US: @AUTELTOOLS CALIBRATION SYSTEM DIAGNOSTICS + ALIGNMENT PRE-CHECK + ADVANCED ADAS State-of-the-art and versatile wheel alignment precheck and ADAS calibration system engineered for both in-shop and mobile applications – move from bay to bay and shop to shop.

MaxiTPMS COMPLETE TPMS SOLUTION ADVANCED TIRE SERVICE TBE200 | TS900 | TS508WF | ITS600 | 1-SENSOR | BLUETOOTH TPMS SENSOR Ascot by Autel offers offers a Complete TPMS Solution providing both TPMS service tools and sensors. TPMS software updates are FREE for the life of the tool.* *Applicable only for the ITS600 and TS508WF 1.855.288.3587 USSUPPORT@AUTEL.COM AUTEL ACADEMY TRAINING autel.us/academy SCAN HERE FOR PRODUCT DETAILS WEB: AUTEL.US FOLLOW US: @AUTELTOOLS

215 VALVES & ACCESSORIES TPMS TOOLS & SENSORS MAXI TPMS WIFI/SENSOR KIT W/ 12 SENSORS • The MaxiTPMS® TS508 is a new generation TPMS diagnostic & service tool specially designed to activate all known TPMS sensors, read TPMS sensor status, check TPMS system health condition, program MX-sensor status, check TPMS system health condition, program MX-sensors and conduct TPMS relearn • With quick mode and advanced mode options, you can save time and energy by choosing the most suitable way to complete TPMS work • Update via Wifi KIT CONTAINS: • TS508 Wifi TPMS tool • 12 MX-sensors w/ rubber stems • 4 Metal valve stems • OBDII cord Ascot No. Mfg. No. 469-51812 469-51812 • Charging cord • Magnet • User Manual • Blow molded case Description TS508WFK 12ASC Maxi TPMS Wifi/Sensor Kit W/ 12 Sensors ASCOT TPMS SENSOR W/RUBBER VALVE • Combines 315MHxz & 433MHz frequencies into a single sensor • 99% vehicle coverage • The exclusive MX-Sensor patented PRESS release valve allows rubber and metal valve stems to freely interchange by hand without requiring a tool • Built to match or exceed OEM sensors in frequency strength and durability • 100% ID clone-able with no relearn required • Quickly update during installation with an Autel wireless programming tool Ascot No. Mfg. No. 461-30326 Description 1-Sensor-ASC Ascot TPMS Sensor W/ Rubber Valve (20 pk) 461-30326 ASCOT TPMS SENSOR W/ METAL VALVE 461-30327 • Combines 315MHxz & 433MHz frequencies into a single sensor • 99% vehicle coverage • The exclusive MXSensor patented PRESS release valve allows rubber and metal valve stems to freely interchange by hand without requiring a tool • Built to match or exceed OEM sensors in frequency strength and durability • 100% ID cloneable with no relearn required • Quickly update during installation with an Autel wireless programming tool Ascot No. Mfg. No. 461-30327 Description 1-Sensor-M-ASC Ascot TPMS Sensor W/ Metal Valve (20 pk)

VALVES & ACCESSORIES TPMS TOOLS & SENSORS ASCOT BY AUTEL PROMOS Contact us for current Ascot by Autel tool and sensor bundle promotions 216 ASCOT TPMS SENSORS • Combines 315MHxz & 433MHz frequencies into a single sensor • 99% vehicle coverage • The exclusive MX-Sensor patented PRESS release valve allows rubber and metal valve stems to freely interchange by hand without requiring a tool • Built to match or exceed OEM sensors in frequency strength and durability • 100% ID clone-able with no relearn required • Quickly update during installation with an Autel wireless programming tool 461-30331 Ascot No. Mfg. No. 461-30331 461-30333 Description 1-Sensor-500-ASC 1-Sensor-500-ASC-METAL Ascot TPMS Sensor W/ Rubber Valve (500 Pack) Ascot TPMS Sensor W/ Metal Valve (500 Pack) 461-30333

217 VALVES & ACCESSORIES TPMS TOOLS & SENSORS AUTEL MAXISYS MS906PRO-TS • Advanced diagnostic tablet compatible with U.S., Asian and European vehicle, 1996 and newer • Complete TPMS servicing: Activate/read all known sensors, diagnose sysytem, program 1-Sensor, relearn sensors • 8-inch Wireless Touchscreen tablet with embedded antenna, Bluetooth-enabled MaxiSYS VCI200 • Octa-Core Processor/128 GB memory / 4 GB RAM • Performs all system scan with ADAS identification/ Customizable Pre & Post scans • Read/Erase Codes, View Freeze Frame and Live Data • Bi-directional control capability including Active test/Performs coding and adaptations • FCA Access via AutoAuth account/ Battery and Charging System analysis (hardware purchase required) • ADAS Calibration-capable with software upgrade and Autel Calibration System purchase • One Year Free software updates and limited hardware warranty ASCOT NO. 469-00906 MFG. NO. MS906PROTS DESCRIPTION Autel MAXISYS MS906PRO-TS AUTEL MAXITPMS TS900 • Activate, read, and relearn all known TPMS Sensors • Program Autel MX-Sensors to replace 99% of TPMS sensors on the vehicles on the road today • Industry-leading relearn by OBD vehicle coverage • Single screen TPMS health report • Compatible with Autel's new Tesla-ready and programmable BLE-001 Bluetooth TPMS sensors • Preform Bi-directional active tests and special functions. Extensive service menu with direct access to over 40 maintenance tasks • Generate detailed pre-and post-scan reports, wifi sharing and printing ASCOT NO. 469-00900 MFG. NO. TS900 DESCRIPTION Autel MAXITPMS TS900

VALVES & ACCESSORIES TPMS TOOLS & SENSORS AUTEL TBE200 TREAD DEPTH MEASUREMENT TOOL • 1.65” AMOLED super retina touchscreen • 1 Megapixel Macro Camera, 8 Megapixel Zoom Camera • Tire Tread Depth/ Brake Disc Wear Measurement • No Need To Remove The Wheel During Measurement • Laser Measurement with 0.1mm Accuracy • Real-Time Measurement Data on Touchscreen • Full Tread Measurement / Quick Check • Measurement Data Curve Display/ Uneven Wear Analysis • Detailed Replacement & Maintenance Suggestions • Test Detail For Single Tire Tread / Brake Disc • Tire Expiration Notice / Tire Recall Lookup / Scan DOT (COMING SOON) • Take Photos of Tire Wear & Damage • Calibration Plate Included • Compatible with Autel ITS600 • Tire Health Report QR Code for easy sharing COMPATIBLE WITH AUTEL ITS600 218 TBE200 INTELLIGENT L ASER MEASUREMENTS TIRE TREAD DEPTH MEASUREMENT BRAKE DISC WEAR MEASUREMENT 0.1MM LASER ACCURACY TOUCHSCREEN DISPLAY > ASCOT NO. 454-00200 MFG. NO. TBE200 DESCRIPTION Autel TBE200 MaxiTPMS Tread Depth Measurement Tool AUTEL MAXI TPMS WIFI TOOL & (16) 1-SENSORS • 4 programming methods • Free updates for the life of the tool • Exclusive TPMS status screen • Change placard value (domestics) • OBD relearn on domestics • Exclusive copy by OBD • Update via WI-FI AUTEL TPMS TOOL/SENSOR KIT CONTAINS: • TS508 TPMS Tool • 16 MX-Sensors w/ Rubber Stems • 4 Metal Valve Stems • OBDII Cord • Charging Cord • Magnet • User Manual • Blow Molded Case ASCOT NO. MFG. NO. 469-50816 DESCRIPTION TS508WFK-16 Maxi TPMS WIFI Tool & 16 MX-Sensor Kit 16 MX-SENSORS

219 VALVES & ACCESSORIES TPMS TOOLS & SENSORS PRE-PROGRAMMED TESLA BLUETOOTH TPMS SENSOR • The MX-Sensor BLE is a pre-programmed Bluetooth Low Energy (BLE) sensor that offers "fit & go" capability for Tesla 3/Y/S/X models • Built to meet or exceed industry standards and tested to endure extreme temperatures, programmable with Autel tools for the latest BLE-equipped vehicles • The MX-Sensor BLE features adjustable valve stems available in black, chrome, and gray • The MX-Sensor BLE is warranted for two years ASCOT NO. MFG. NO. 461-30100 DESCRIPTION MX-Sensor BLE Pre-Programmed Tesla Bluetooth TPMS Sensor AUTEL MX-SENSOR PROGRAMMABLE UNIVERSAL TPMS SINGLE SENSORS • Combines 315MHz & 433MHz frequencies into a single sensor • 99% vehicle coverage • The exclusive MX-Sensor patented PRESS release valve allows rubber and metal valve stems to freely interchange by hand without requiring a tool • Built to match or exceed OEM sensors in frequency strength and durability • 100% ID clone-able with no relearn required • Quickly update during installation with an Autel wireless programming tool 461-20326 461-20327 461-30100 ASCOT NO. MFG. NO. 461-20326 461-20327 461-20328 461-20330 DESCRIPTION 1-Sensor 1-Sensor-M 1-Sensor-240 1-Sensor-M-240 Autel MX-Sensor Programmable Universal TPMS Single Sensor - Rubber Autel MX-Sensor Programmable Universal TPMS Sensor - Metal Autel MX-Sensor w/ Rubber Valve - 240 Bulk Pk. Autel MX-Sensor w/ Metal Valve - 240 Bulk Pk. 461-20328 AUTEL MX-SENSOR REPLACEMENT VALVES • Patented PRESS release valve design • No valve tools required • Simply click in and press out • Cap and core included • Available in rubber or metal stems ASCOT NO. MFG. NO. DESCRIPTION RUBBER 469-20280 469-20279 469-20281 469-20282 469-20283 RV1000 MV1000 CV-001 CV-002 CV-003 Autel MX-Sensor Replacement Rubber Valve METAL Autel MX-Sensor Replacement Metal Valve Autel Black MX-Sensor Replacement Metal Valve Autel Titanium Grey MX-Sensor Replacement Metal Valve MX-Sensor Chrome Replacement TPMS Valve AUTEL TIRE PRESSURE PLACARD VALUE STICKER • Never set tire pressure below OE Specs • Always use equal to or greater than load rating on replacement tire to determine proper air pressure for placard • Always complete and install a new tire placard properly marked • Place new tire placard next to OE tire placard • Quantity: 100 per roll ASCOT NO. MFG. NO. 469-20284 PVS01 DESCRIPTION Autel Tire Pressure Placard Value Sticker (100 per Roll) 469-20284 469-20283 469-202 469-20280

VALVES & ACCESSORIES TPMS TOOLS & SENSORS SCHRADER EZ SENSOR®/TOOL BUNDLE • New S41 (21298) model replaces the S46 (21290) • Offers functionality and flexibility at an affordable price • Simple and easy-to-use interface guides the user when replacing and servicing TPMS sensors • With the addition of the OBD Quick Connector, users can reset the ECU in less than 2 minutes • Frequently updated with new features and up-to-date vehicle and sensor coverage SCHRADER EZ-SENSOR® BUNDLE CONTAINS: • (24) Schrader EZ- Sensors® • ATEQ S41 TPMS Scan Tool • OBDII cable Ascot No. Mfg. No. 469-21298 Description 21298 SCHRADER EZ SENSOR®/TOOL BUNDLE: 24 EZSensors plus Programming and Diagnostic Tool SCHRADER EZ-SENSOR®/TOOL BUNDLE • Programs EZ-sensor® and other programmable TPMS sensors • Reads, activates & relearns all known TPMS sensors in the market • Clears, retrieves and decodes TPMS Diagnostic Trouble Code (DTC) information • Offers quick & convenient software updates through WIFI • Comes with 5 years of software updates NEW & IMPROVED TOOL 220 TOUCHSCREEN 469-21298 SCHRADER DUAL BAND EZ-SENSOR® • Combines 314.9, 315 and 433 applications into ONE sensor • Future proofed to support new and pending OE system technologies • Increases speed, ensures accuracy and reduces the cost of servicing TPMS-equipped vehicles • Replicates OE functionality, including auto-locate technology • Aluminum clamp-in and rubber snap-in stem options • Fully programmable to the selected vehicle type • Covers majority of TPMS equipped vehicles • Works with many programming tools • Achieves OE quality requirement Includes EZ100 Schrader S57 Tool -sensors® ASCOT NO. MFG. NO. 469-21057 DESCRIPTION 21057-S57EZGO100 Schrader EZ-sensor®/Tool Bundle SCHRADER EZ-SENSOR® GO The market's fastest programmable tpms sensor! 1-3 second sensor programming for a majority of domestic vehicles. includes the same great benefits and functionality of the ez-sensor® 461-33501 220 Bulk Pack 461-33500 ASCOT NO. MFG. NO. 461-33500 461-33501 33500 33501 DESCRIPTION Schrader Dual Band EZ-Sensor Scrader Dual Band EZ-Sensor® - 220 Bulk Pack • 1 SKU • Combines 314.9, 315 & 433 MHZ • PROGRAMMABLE: Compatible with most tools on the market you may already own • Rubber Snap-In Stem • OE QUALITY: From the OE Supplier ASCOT NO. MFG. NO. 461-33560 461-33561 461-33562 33560 33560M 33560-24 DESCRIPTION Schrader EZ-sensor® GO TPMS Sensor Schrader EZ-sensor® GO - 220 Bulk Pk. Schrader EZ-sensor® GO - 24 Bulk Pk. 461-33560

221 VALVES & ACCESSORIES TPMS TOOLS & SENSORS HAMATON U-PRO SENSORS • The FIRST and ONLY smartphone programmable TPMS sensor • Sensor configures in just 1 second - fastest in the market • 99.9% vehicle coverage - tested and validated in the U.S. • Always up to date - cloud-based updates via our free NFC APP ensure the latest vehicle coverage is always at your fingertips • Dual Frequency - combines both 315 MHz & 433 MHz frequencies in one sensor • Flexible programming options - compatible with your smartphone and over 30+ ATEQ TPMS tool • Extended warranty coverage - comes with a 3-year no-hassle warranty • Tech support - industry-leading technical support available 7 days a week to support you and your customers Scan For Chart! HAMATON U-PRO BUNDLES • Industry Leading 99.9% Vehicle Coverage • The ONLY TPMS Sensor Programmable By Smartphone - Available On The App Store and Google Play • Stay Updated in Real Time – Instantly add vehicle coverage through the free NFC app with cloud-based updates • H47 TPMS Diagnostic Tool Includes Free Lifetime Updates • 3-Year Sensor Warranty • Backed by 7-Day-Week Michigan Based Technical Support 461-10078 461-20178 461-10178 461-20078 ASCOT NO. MFG. NO. 461-10078 461-10178 469-06208 469-06210 469-06211 469-06213 469-62072 469-62104 469-62312 DESCRIPTION HTS-A78EG HTS-A78ED 6-208 6-210 6-211 6-213 6-207B 6-210H 6-231C Hamaton U-Pro NFC Univeral Sensor — Snap-in Valve Hamaton U-Pro NFC Univeral Sensor — Dual Valves Hamaton Replacement Snap-In Valves - 10/BOX Hamaton Replacement Snap-In Valves - 10/BOX Hamaton Replacement Snap-In Valves - 10/BOX Hamaton High Speed Snap-In Valves - 10/BOX Hamaton HS Dual Fitment Snap-In Valves - 10/BOX Hamaton Replacement Snap-In HS Valves - 10/BOX Hamaton Relacement Clamp-In Valves - 10/BOX ASCOT NO. MFG. NO. 469-20178 469-20078 DESCRIPTION HAM-B065 Hamaton U-Pro Dual Valve Sensor/H-47 Tool Bundle HAM-B065S Hamaton U-Pro Snap-In Sensor/H-47 Tool Bundle

VALVES & ACCESSORIES TPMS SENSORS & TOOLS COMPLETE TPMS & TIRE MANAGEMENT DIAGNOSTIC TABLET The VT67 is a professional all-in-one TPMS diagnostic and programming tablet. It offers fast sensor activation, programming, OBDII relearns, and wireless updates through an easy-to-use touchscreen interface. WI-FI ENABLED, OBDII TPMS RESET & PROGRAMMING TOOL The VT47 performs sensor activation, programming, and OBDII relearns. It features an intuitive interface and frequent software updates for broad vehicle coverage 222 469-47100 ASCOT NO. MFG. NO. 469-47100 469-67100 TPMS CHECK BOX ASCOT NO. MFG. NO. 469-67100 DESCRIPTION VT67-0000 Complete TPMS & Tire Managment Diagnostic Tablet • Identify differences between the tire filing gauge and the TPMS sensor readings • Designed for use with all styles of TPMS sensors • Test TPMS sensors for defects before mounting to the wheel VT37 TPMS RESET, TRIGGER & PROGRAMMING TOOL As the successor to the VT36, the brand new VT37 is the ideal tool for DIYers, technicians and front counter workers. The tool is designed to activate, read and service all major OEM & aftermarket sensor brands, as well as perform vehicle specific TPMS relearn procedures. Constant Live Sensor and quarterly updates allow for the newest TPMS sensors to be added to the tool effortlessly. Whether it’s stored in a glove compartment or toolbox, the VT37 is the perfect partner for servicing TPMS. ASCOT NO. MFG. NO. 469-03200 DESCRIPTION VB01-0000 TPMS Check Box 200 DESCRIPTION VT47s-0000 Wi-Fi Enabled, OBDII TPMS Reset & Programming Tool VT57 ALL-IN-ONE TPMS & TIRE MANAGEMENT TOOL Introducing the all-new VT57 with a brand-new touchscreen interface, 100% OEM sensor diagnostic coverage, 90% OBD coverage, tire tread depth capturing, "Sync-ID"OBD technology and much more. Constant Live Sensor updates and the ability to connect Wi-Fi to ensure that the VT57 has the latest coverage available. 469-37100 ASCOT NO. MFG. NO. 469-37100 DESCRIPTION VT37-0000 VT37 TPMS Reset, Trigger & Programming Tool ASCOT NO. MFG. NO. 469-57101 TS57-1002-BLE VT57 All-In-One TPMS & Tire Management Tool 469-57101 DESCRIPTION

223 VALVES & ACCESSORIES DILL REPLACEMENT TPMS TRANSMITTERS DILL BLUETOOTH AFTERMARKET TPMS • Max Operating Pressure: 150psi (1040 kPa) • Operating Temperature: -40°F to 196°F (-40°C to 91°C) • Cellular data not required to operate the app • System allows user to monitor internal tire pressure and temperature by installing sensors inside the tire • Can be upgraded to monitor up to 38 tires • Can store over 30 different vehicle configurations • Signal Repeater available if needed ASCOT NO. 469-01604 469-01606 469-12604 469-01607 469-09400 469-09401 469-00496 469-09405 469-01195 MFG. NO. 1604-V 1606-V 1604-B 1606-B 9400-B 9400-V VS-496 9405 1195 DESCRIPTION 4 Sensor Valve-mounted Aftermarket TPMS 6 Sensor Valve-mounted Aftermarket TPMS 4 Sensor Band-mounted Aftermarket TPMS 6 Sensor Band-mounted Aftermarket TPMS Replacement sensor in cradle with 1195 band Replacement sensor with VS-496 Valve for aftermarket TPMS (0.453” and 0.625” rim holes) Aftermarket TPMS Signal Repeater Heavy Duty TPMS Band 469-01604 (Qty x4) Scan For Video! 469-02604 (Qty x4) 469-09400 Sensors transmit to the app on your phone or tablet *Display Device Not Included 469-09401

VALVES & ACCESSORIES COMMERCIAL TPMS AUTEL PROGRAMMABLE CV TPMS SENSOR WITH METAL BAND FOR RIMS SIZED 14 TO 24.5 INCHES HAMATON TRUCK SENSORS • Programmable Commercial Vehicle TPMS Sensor • Package includes metal band to attach sensor to rim, compatible with rims sized 14 to 24.5-inches • Program the Autel CVS-A01 sensor with the Autel MaxiTPMS ITS600CV tablet to replace TPMS sensors on light, medium and heavy duty vehicles • Compatible with 433MHZ frequency systems • Autel TPMS sensors are designed to meet or exceed industry standards and offer long battery life for proven customer satisfaction • Covered by a two-year limited warranty • Never set tire pressure below OE Specs • Always use equal to or greater than load rating on replacement tire to determine proper air pressure for placard • Always complete and install a new tire placard properly marked • Quantity: 100 per roll 224 461-08011 461-30170 Ascot No. Mfg. No. 461-30170 Description CVS-A01 Autel Programmable CV TPMS Sensor with Metal Band for Rims Sized 14 to 24.5 Inches AUTEL PROGRAMMABLE CV TPMS TRUCK SENSOR WITH FABRIC BAND • Programmable Commercial Vehicle TPMS Sensor • Package includes fabric band to attach sensor to rim • Program the Autel CVS-A01 sensor with the Autel MaxiTPMS ITS600CV tablet to replace TPMS sensors on light, medium and heavyduty vehicles- Compatible with 433MHZ frequency systems • Autel TPMS sensors are designed to meet or exceed industry standards and offer long battery life for proven customer satisfaction • Covered by a two-year limited warranty 461-30190 461-06201 461-08012 461-30210 Ascot No. 461-08011 Ascot No. Mfg. No. 461-30190 461-30210 Description CVS-A01 CVS-A01 Autel Programmable CV TPMS Sensor with Fabric Band for Rims Sized 14 to 17.5 Inches Autel Programmable CV TPMS Sensor with Fabric Band for Rims Sized 17 to 24.5 Inches 461-08012 461-06201 HTS-T01A HTS-T01B 6-B01 U-Pro Truck 1.0 Valve Mounted Sensor U-Pro Truck 1.0 Strap Mounted Sensor U-Pro Truck Sensor Strap Only Mfg. No. Description

225 VALVES & ACCESSORIES COMMERCIAL TPMS SCHRADER TPMS SENSORS ADVANCED COMMERCIAL VEHICLE TPMS TOOL The VT Truck 2.0 offers functionalities specifically designed for the maintenance of trucks and buses and includes OBD coverage. The tool is compatible with most truck and bus TPMS sensors and can be frequently updated with new heavy transport vehicles. ASCOT NO. MFG. NO. 469-47102 • OEM-Grade Performance: Our valve mounted sensors are built to meet the exacting standards of leading truck manufacturers • Assortment of OE quality TPMS valves are available • Seamless Integration: Compatible with existing TPMSequipped commercial vehicles, ensuring easy adoption • No programming needed - replacement sensors are OE application specific and work on Kenworth, MAN, Prevost, Peterbilt, Scania, and Volvo 469-47102 DESCRIPTION VT-Truck2.0 Advanced Commercial Vehicle TPMS Tool ASCOT NO. MFG. NO. 461-53707 461-53715 461-53718 461-53736 461-53723 53707 53715 53718 53736 53723 DESCRIPTION TPMS Sensor for Scania Trucks TPMS Sensor for Volvo Trucks TPMS Sensor for Prevost and Volvo Buses TPMS Sensor for Kenworth and Peterbilt Trucks TPMS Sensor 433Mhz 461-53736 TRUCK TPMS VALVES 469-57005 469-06430 469-06431 469-06432 469-06433 469-06434 469-57010 469-57009 469-06460 469-06465 469-06468 ASCOT NO. MFG. NO. 469-06430 469-06431 469-06432 469-06433 469-06434 469-06460 469-06465 469-06468 469-64640 6-430 6-431 6-432 6-433 6-434 6-460 6-465 6-468 6-640 DESCRIPTION Replacement HD TPMS Valve - Alcoa 70MS-7 Replacement HD TPMS Valve - Alcoa 45MS Replacement HD TPMS Valve - Alcoa PVR128 Replacement HD TPMS Valve - Alcoa V3-22-1 Replacement HD TPMS Valve - Alcoa V3-20-7 Replacement HD TPMS Valve - 50.5 L, 22 Deg. Angle Replacement HD TPMS Valve - 40 L, 0 Deg. Angle Replacement HD TPMS Valve for Ford F-600 OE Sensors Replacement HD TPMS Valve - 57.2 L, 0 Deg. Angle, 45 Deg. Bend 469-57001 ASCOT NO. MFG. NO. 469-57009 46-57010 469-57005 469-57001 469-57011 469-57012 57009 57010 57005 57001 57011 57012 469-57011 DESCRIPTION Schrader HD TPMS Valve TR554D Schrader HD TPMS Valve TR572-F19 Schrader HD TPMS Valve OEM Schrader HD TPMS Valve TR543C Schrader HD TPMS Valve 70MS-27 Schrader HD TPMS Valve TR546 469-57012 469-64640

VALVES & ACCESSORIES TPMS ACCESSORIES & KITS TPMS VALVE CAPS SCHRADER REPLACEMENT ALUMINUM VALVE STEMS ASCOT NO. MFG. NO. DESCRIPTION 469-34000 34000 468-20595 468-00050 468-20495 469-25080 469-25078 469-25082 469-25083 468-20795 ASCOT NO. MFG. NO. 468-00050 468-20495 468-20595 20395 20495 20595 468-20695 468-20795 468-20995 468-59019 468-59021 468-59023 20695 20795 20995 59-0019 59-0021 59-0023 468-20995 468-59019 DESCRIPTION Plastic Valve Caps Aluminum Valve Caps Black TPMS Plastic Sealing Valve Caps for Snap-In Transmitters Green TPMS Plastic Sealing Valve Caps for Snap-In Transmitters Green TPMS Plastic Sealing Valve Caps Black TPMS Plastic Sealing Valve Caps Green Nitrogen Indicating Aluminum Valve Cap Chrome-Plated Brass Valve Caps Universal Nitrogen Caps GREY PLASTIC TPMS VALVE CAP W/ SEAL • Grey cap for clamp-in TPMS sensors • A sealing cap is important for all TPMS systems • Keeps moisture and dirt out of the electronic sensor • Insures that the primary seal exists to avoid air leakage 468-74920 LONG BLACK TPMS VALVE CAP W/ SEAL • Long black cap for snap-in TPMS sensors • A sealing cap is important for all TPMS systems • Keeps moisture and dirt out of the electronic sensor • Insures that the primary seal exists to avoid air leakage ASCOT NO. MFG. NO. 468-74920 468-74921 DESCRIPTION A17-492T-1 A17-492L-1 Grey Plastic TPMS Cap w/ Seal Long Black TPMS Cap w/ Seal QTY./BOX 100 100 100 100 100 100 100 100 100 468-20055 468-01001 468-09002 TPMS VALVE CORES • Electroless Nickel-Plated valve core • QUANTITY: Packaged 100 per box ASCOT NO. MFG. NO. 468-09000 20055 100-TP 9002 468-09000 DESCRIPTION VC-9000 Ascot Electroless Nickle-Plated HighTemperature Valve Cores Schrader TPMS Valve Core Electroless Dill Electroless Nickel Plated Valve Core Nickel Plated High Temp Valve Core BERU TPMS VALVE INSERTS • Original equipment valve insert for the HUF Tire Safety System • Each Insert comes complete with cap, core, grommet & grommet nut • Colored bottom to differentiate inserts • APPLICATIONS: Audi, Bentley, BMW, Ferrari, Land Rover, Maserati, Maybach, Mercedes-Benz, Porsche, Volkswagen • Requires TX-20EZ torx tool for assembly/disassembly 25080 25078 25082 25083 Replacement Aluminum Valve Stem Aluminum Straight Stem for 90 Degree EZ-Sensor Aluminum Angled Stem for 90 Degree EZ-Sensor Black Straight Stem for 90 Degree EZ-Sensor Black Angled Stem for 90 Degree EZ-Sensor 469-34000 226 461-59307 461-59337 461-59357 468-74921 QTY./BOX 100 100 ASCOT NO. MFG. NO. 461-59307 461-59337 461-59357 461-59387 469-02020 59.0342 59.0340 59.0346 59.0344 TX-20EZ DESCRIPTION Green Insert Silver Insert Orange Insert Black Insert Torx Screwdriver 461-59387

227 VALVES & ACCESSORIES TPMS ACCESSORIES & KITS DILL TPMS VALVE CAPS & CORES • QUANTITY: Packaged 100 per box REPLACEMENT TPMS VALVE STEM 468-00635 468-00650 ASCOT NO. MFG. NO. DESCRIPTION 468-00635 468-00650 468-00680 468-00690 635 650 680 690 468-06300 469-00650 630N 650B 468-06300 Plastic Cap for VS-950 TPMS Snap-In Valve Small Plastic TPMS Valve Cap - Gray N2 Aluminum Cap for TPMS N2 Plastic Cap for TPMS Plastic TPMS Valve Cap - Gray Short Black Plastic TPMS Valve Cap ALLIGATOR U2 UNIVERSAL REPLACEMENT TPMS VALVE STEMS ALLIGATOR UNIVERSAL METAL TPMS KIT • Universal TPMS Service Kit for Metal Valve Stems ensures you choose the correct components corresponding to your specific TPMS sensor • Works on 97% of metal valve stem TPMS sensors in the market • Each kit includes a valve core, valve nut, valve cap, large grey seal, metal washer and small black seal • Unused parts can be discarded • Packaged 20 kits per box • Designed, manufactured and test-rated to outperform comparable OEM products • ALLIGATOR TPMS Service Kits contain all components that are necessary for the correct and thorough service • Use only nickel-plated valve cores in conjunction with TPMS valves • Pre-threaded screw • Long cap • Snap-In valve replacement for both GM & Ford TPMS applications • Includes a long black sealing cap and T-10 screw • Requires T-10 torx tool for assembly/disassembly • Similar to 31 Inc. 17-20008, Schrader 20018, Dill VS-950 • 100 Per Bag/500 per box • Threaded 469-00208 ASCOT NO. MFG. NO. 469-00208 AS2008 DESCRIPTION Replacement TPMS Valve Stem (100 Per Bag) 469-91322 469-22481 ASCOT NO. MFG. NO. 469-22482 U1 DESCRIPTION Alligator Universal Metal TPMS Kit (20 Pack) ASCOT NO. MFG. NO. 469-22481 U2 469-91322 DESCRIPTION Alligator U2 Universal Replacement TPMS Valve Stem - Box of 20 591320BC Alligator U2-Bulk Universal Replacement TPMS Valve Stem - 50 Per Bag/300 Per Case

VALVES & ACCESSORIES TPMS ACCESSORIES & KITS .625" VALVE HOLE TPMS REPLACEMENT VALVES • Found on Ford Super Duty Trucks and Sprinter Vans • MAXIMUM COLD INFLATION PRESSURE: 150 PSI • Attachment screw and valve cap included OR .625" VALVE HOLES TPMS REPLACEMENT VALVES 228 469-17218 469-17395 469-17392 ASCOT NO. MFG. NO. 469-17392 469-17393 DESCRIPTION 17-50392 TPMS Replacement Valve for .625" Valve Hole (Parallel Key) 17-50393 TPMS Replacement Valve for .625" Valve Hole (Square Key) 469-17397 TPMS REPLACEMENT VALVES 17246 469-17590 469-17393 17245 397 469-17591 9 ASCOT NO. MFG. NO. 469-17218 469-17395 469-17397 469-17590 469-17591 469-17596 DESCRIPTION 17-20018 17-50395 17-50397 TPMS Snap-In Valve for Ford TPMS Snap-In Square Key Continental Snap-In Rubber TPMS Valve Stem 17-50390 Metal TPMS Valve Stem for Ford 17-50391 TPMS Metal Clamp-In Valve for TRW Screw-In 17-50396 TPMS Valve for Dodge Ram Dually with Aluminium Wheels SHORT TPMS REPLACEMENT SNAP-IN VALVE STEM ASCOT NO. MFG. NO. 469-17245 469-17246 469-17395 469-17397 469-17539 DESCRIPTION 17-20045 17-20046 17-50395 17-50397 17-50399 High-Speed TPMS Snap-In Valve Stem TPMS Snap-In Valve Stem (Right Angle Key) Snap-In Sensor Rubber Valve Stem (Square Key) Snap-In Sensor Rubber Valve Stem Hyundai TPMS Snap-In Valve • Found on custom wheel applications • Addresses clearance issues with inside valve holes • MAXIMUM COLD INFLATION PRESSURE: 65 PSI • Parallel key 469-17596 ASCOT NO. MFG. NO. 469-17398 DESCRIPTION 17-50398 Short TPMS Replacement Snap-In Valve Stem 469-17398

229 VALVES & ACCESSORIES TPMS ACCESSORIES & KITS DILL TPMS ACCESSORY KITS ASCOT NO. MFG. NO. DESCRIPTION 469-00015 469-00031 469-00035 469-00065 469-00020 469-00950 469-00951 469-01010 469-01030 469-01031 469-01040 469-01050 469-01060 469-01070 469-01077 469-01080 469-01090 469-01091 469-01092 469-01093 469-01094 469-01095 469-01096 469-01097 469-01098 469-01100 469-01110 469-01130 469-02040 469-02045 469-07000 469-07020 469-20025 469-20130 469-21010 469-21020 469-90662 VS-15 VS-30 VS-35 VS-65 VS-20 VS-950 VS-1010 1030K 1031K 1040K 1050K 1060K 1070K 1077K 1080K 1090K 1091 1092 1093 1094 1095 1096 1097 1098K 1100K 1110K 1130K 2040K 2045K 7000K 7020K 2000K 2030K 2010K 2020K Rubber Snap-In Stem for Toyota Rubber Snap-In Valve for Nissan Kicks and Nissan Quest Clamp-In Replacement Valve for Dodge & 3500 Trucks Snap-In Replacement Valve for Dodge 1500, 2500, & 3500 Trucks TPMS Snap-In Stem for GM, Ford; Includes Stepped Screw Rubber Snap-In Replacement Valve for GM & Ford Transmitters 950SC/4PK TMPS Snap-IN Chrome Sleeve and Cap 4/Pack for VS-950 Rubber Snap-In Stem for Hyundai Sante Fe Siemens Kit for VW (Fits 1053 Sensor) VW Kit for Special Wheel Package Siemens Mercedes Assembled Valve Siemens Kit for Chrysler w/ Special Metal Washer Kit for Ford, Lincoln, Mercury Kit for Buick, Cadillac, Chevrolet, GMC, Isuzu, Pontiac, Saab Accessory Kit for 8006 Sensor, 97-00 Corvette Kit for Cadillac, Chevrolet, Chrysler, Dodge, Infiniti, Isuzu, Jeep, Mitsubishi, Nissan, Plymouth, Subaru Compatible with Beru Sensors Ball-seat valve stem assembly; 56mm, yellow marking Ball-seat valve stem assembly; 43mm; silver or no marking Ball-seat valve stem assembly; 48mm, green marking Ball-seat valve stem assembly; 49mm, black marking Ball-seat valve stem assembly; 51mm, orange marking TPMS Stem For Hyundai, Kia, Honda TPMS Stem For Hyundai, Kia, Honda Dodge Sprinter Replacement Valve Compatible with Pacific Sensors for Toyota/Lexus Compatible with Pacific Sensors for Toyota Kit for Mazda, Mitsubishi, Nissan Kit fo Hyundai, KIA Kit for Honda/Acura Kit for Acura, Chrysler, Dodge, Jeep, Nissan Kit for BMW, Cadillac, Honda, Hyujndai, Infiniti, Jaguar, KIA, + more & REDI-Sensor Kit for Acura, Honda, Hyundai, KIA Kit for Chrysler, Dodge, M-Benz, Nissan Kit for Saturn, Volvo Early 2007 GM Kit for Entire Sensors 9066K-LS TPMS Valve Stem Kit with ball joint COMPLETE REPLACEMENT KIT FOR CHRYSLER/DODGE TPMS APPLICATIONS • COMPLETE REPLACEMENT KIT INCLUDES THE FOLLOWING: Aluminum TPMS Valve Stem w/ Grommet, Valve Nut, Valve Core 469-90660 ASCOT NO. MFG. NO. 469-90660 9066-K DESCRIPTION Dill Chrysler TPMS Complete Stem Replacement Kit 469-01095 469-00950 469-00925 469-00035 469-00020 469-00065 469-00015 469-01010 REPLACEMENT STEM FOR CHRYSLER/ DODGE TPMS APPLICATIONS ASCOT NO. MFG. NO. DESCRIPTION 469-90661 9066-1 Dill Chrysler TPMS Replacement Stem Only 469-90661

VALVES & ACCESSORIES TPMS ACCESSORIES & KITS REDI-SENSOR VALVE STEMS DILL REPLACEMENT TPMS STEM • Metal Replacement Clamp-In Valve for GM, Ford, Dodge Ram, Subaru & Suzuki • T-10 screw included • QUANTITY: Packaged 20 per box 230 469-00770 469-00772 469-00925 ASCOT NO. MFG. NO. 469-00925 469-01925 469-02925 469-01925 DESCRIPTION VS-925A VS-925B VS-925C Dill Aluminum Replacement TPMS Stem Dill Aluminum Replacement TPMS Stem - Black Dill Metal Replacement TPMS Stem - Chrome TPMS SNAP-IN CHROME SLEEVES AND CAPS 469-00771 9-00045 ASCOT NO. MFG. NO. DESCRIPTION 469-00045 VS-45 469-00770 VS-70 469-00771 VS-70B 469-00772 VS-70S 469-00773 VS-70C Clamp-In Stem for REDI-Sensor w/ Clip Design, Chrome Plated Brass. Fits 7001HP-R & Certain OE Sensors REDI-Sensor Replacement Valve Stem w/ All Components REDI-Sensor Valve with Black Anodized Nut and Black Cap REDI-Sensor Valve Stem with Cap and Core Assembled Chrome Valve Stem Assembly for OE and REDI-Sensor™ ASCOT NO. MFG. NO. 469-00951 DESCRIPTION 950SC/4PK TPMS Snap-In Chrome Sleeve and Cap 4/Pack for VS-950 469-00951 469-02925 SCHRADER TPMS SERVICE PACK ASSORTMENTS • The service pack should be replaced every time the tire is removed from the wheel • With Schrader’s NEW assortment kits, always have the service pack you need, when you need it! • These kits include Schrader’s 12 most popular service packs on the market today • Kits come in a convenient, durable, plastic case that organizes the service packs for faster, more efficient TPMS service ASCOT NO. MFG. NO. DESCRIPTION 469-20798 469-20898 20798 INCLUDES 8 UNITS OF EACH SERVICE PACK: 20004, 20007, 20009, 20013, 20014, 20018, 20020, 20023, 20030, 20032, 20036, 20049 20898 INCLUDES 8 UNITS OF EACH SERVICE PACK: 20004, 20007, 20009, 20013, 20014, 20018, 20020, 20023, 20030, 20032, 20036, 20049 6 Programmable, Single SKU EZ-sensors (# 33500) 469-20798

231 VALVES & ACCESSORIES TPMS ACCESSORIES & KITS 469-00543 469-00542 469-00416 469-00545 DILL TPMS ADAPTERS ASCOT NO. MFG. NO. 469-00543 DA543E 469-00542 DA542 469-00416 DA416 469-00545 DA545D 469-00572 DA572 469-00574 DA574-K32 DESCRIPTION Bent 0.390" Valve Assembly for OE Front Alloy Wheels on 2020+ Chevrolet 3500 DRW and 2020+ GMC Sierra 3500 DRW Straight 0.390" Valve Assembly for Popular Aftermarket 19.5" & 22.5" Wheels Straight 0.453" / 0.625" Valve Assembly for Factory GM/RAM Trailer TPMS Sensors and Common HighRail Conversions 469-00572 Bent 0.390" Valve Assembly for Popular Aftermarket 19.5" & 22.5" Wheels, and Common HighRail Conversions Straight 0.625" Valve Assembly for Common HighRail Conversions TPMS 56-degree bent valve assembly designed for High Rail vehicle conversions *SENSORS NOT INCLUDED

VALVES & ACCESSORIES TPMS ACCESSORIES & KITS DILL CLAMP-IN REPLACEMENT TPMS VALVE STEMS DILL TPMS VALVE STEMS 232 469-00240 469-00241 469-00917 469-00919 469-00312 469-00490 ASCOT NO. MFG. NO. DESCRIPTION 469-00240 VS-240MC Silver Chrome Clamp-In 0.453 TPMS Stem. Compatible anywhere a VS-65 or VS-20 is used OEM. Fits Dill 5000 Series; 10 pack. 469-00241 469-00917 469-00919 VS-241 VS-917 VS-919 Clamp-In TPMS Valve for 2017 Ford Truck & Ram 3500. Includes USA Double Seal Cap. 6 Per Pack. Chrome Clamp-In 0.625 TPMS Stem. Used on 7001HP-R REDI-Sensor with Push Button. Silver Clamp-In 0.625 TPMS Stem. Compatible anywhere a VS-20, VS-65, or VS-950 are used. ASCOT NO. MFG. NO. 469-00312 VS-312 469-00490 VS-490 469-01925 469-02925 469-03925 469-01312 VS-925A VS-925B VS-925C VS-312B DESCRIPTION Aluminum valve stem for Toyota and Lexus Valve stem for Bluetooth Tesla sensor Aluminum Metal Replacement Valve for GM & Ford Snap-in Black Metal Replacement Valve for GM & Ford Chrome Replacement Valve for GM & Ford Snap-in TPMS Clamp-in valve stem : 0.453” black valve stem assembly for Toyota & Lexus; Pressure Rated to 200psi TPMS KIT FOR REDI-SENSOR ASCOT NO. MFG. NO. 469-07020 7020K DESCRIPTION TPMS Replacement Component Kit for REDI-Sensor and OE Sensors 469-07020

233 VALVES & ACCESSORIES TPMS ACCESSORIES & KITS UNIVERSAL MASTER TPMS TRANSMITTER HARDWARE & TOOL SERVICE SET • Versatile 152 piece assortment (15 unique kits) covers over 55 different OEM sensor models and 90% of US vehicles • TOOLS INCLUDED: A Sensor Service Tool, Ratcheting Torque Wrench, 2 Deep Sockets, 2 Torque Drivers and bits DILL 7100 TPMS SERVICE KIT ASSORTMENT VERSATILE: 152 PIECES INCLUDES 2 OF EACH: VS-240MC INCLUDES 4 OF EACH: 1030K, 2045K, 1070K, VS-20, VS-90, 1050K, 1080K, 1100K, 2030K, 1110K, VS-65, 2040K, 2000K, 7020K, 1090K, 7000K INCLUDES 6 EACH: VS-950 STEMS Approximately 94% coverage" 15 UNIQUE KITS 469-30000 469-07100 ASCOT NO. MFG. NO. 469-07100 7100 DESCRIPTION Dill TPMS Master Accessory Assortment DILL 7300 TPMS REPLACEMENT STEM ASSORTMENT ASCOT NO. MFG. NO. 469-30000 30000 DESCRIPTION Universal Master TPMS Set DILL SERVICE KIT ASSORTMENT CABINET • Includes approximatley 180 pieces • Contents and their quantities are kept updated to maximize coverage • Cabinet dimensions: 17" x 11" x 11" 469-05112 INCLUDES 2 OF EACH: VS-925C, VS-312B, VS-40, 1094, 1097K, 1096K, VS-965 INCLUDES 4 OF EACH: VS-65, 9066K, VS-1010, VS-950, VS-90, VS-20, VS-70, VS-490, VS-30 INCLUDES 6 EACH: VS-950 STEMS Approximately 97% coverage" 469-07300 ASCOT NO. MFG. NO. 469-05112 5112A DESCRIPTION Service Kit Assortment Cabinet ASCOT NO. MFG. NO. 469-07300 7300 DESCRIPTION Dill TPMS Replaceable Stem Assortment

TPMS CHROME FLIP SOCKET/ EXTENSION KIT • 1/4” drive 11mm x 12mm chrome flip socket • 1/4” drive x 2” chrome extension • Unique flip socket design is the key to the easy installation and removal of TPMS sensors • Both pieces made of chrome vanadium VALVES & ACCESSORIES TPMS TOOLS ASCOT NO. MFG. NO. 167-01012 DESCRIPTION TMRTR1012 167-01012 TPMS Chrome Flip Socket/ Extension Kit TPMS CHROME FLIP SOCKET/SOCKET DRIVER KIT • 1/4” drive 11mm x 12mm chrome flip socket • 1/4” drive screwdriver handle socket driver – 6” overall length – 2-1/2” shank length • Unique flip socket design is the key to the easy installation and removal of TPMS sensors • Socket is made of chrome vanadium • Socket driver is made in the USA MADE IN THE USA 167-01015 ASCOT NO. MFG. NO. 167-01015 DESCRIPTION TMRTR1015 TPMS Chrome Flip Socket/Socket Driver Kit VALVE CORE TOOLS: SCREWDRIVER TYPE & STANDARD BORE LONG VALVE • Has a plastic screwdriver handle for better grip and leverage 469-00612 469-00607 ASCOT NO. MFG. NO. 469-00607 469-00612 607 612 DESCRIPTION Screwdriver Type Valve Core Tool Standard Bore Long Valve Core Tool VALVE CORE TORQUE TOOL • Preset torque guarantees correct setting every time on all cores • Calibrated to 4 in.-lbs. of torque • Meets the Tire & Rim Association (TRA) specifications for installing valve cores on TPMS applications • Can be used to install and remove cores in standard valves ASCOT NO. MFG. NO. 469-00044 DESCRIPTION TPMS-4VC Valve Core Torque Tool T-10 TORQUE TOOL WITH REPLACEABLE TIP • Installs replacement snap-in valves to Schrader snap-in transmitters • Preset to 12 in./lbs. ASCOT NO. MFG. NO. 469-15415 469-20140 469-25415 469-35415 15415 20140 15415-1 5415-2 DESCRIPTION T-10 Torque Tool w/ Replaceable Tip T-10 Torque Tool Replacement T-10 Tip Replacement 7mm Socket for VS 1010 TPMS Snap-In Stem 469-15415 ASCOT NO. MFG. NO. DESCRIPTION 469-00673 673-D Screwdriver/Core Tool 1/4" SOCKET DRIVER • Durable screwdriver handle and a chrome vanadium shank • Ideal for use with the TPMS 11mm x 12mm flip socket • 6" Overall Length, 2-1/2" Shank Length • MADE IN THE USA 469-20140 MADE IN THE USA 319-72521 ASCOT NO. MFG. NO. 319-72521 7252100 DESCRIPTION 1/4" Socket Driver 469-00044 MADE IN THE USA T-20 TORQUE TOOL WITH REPLACEABLE TIP • Installs replacement Beru clamp-in valves • Preset to 35 in./lbs. ASCOT NO. MFG. NO. 469-15535 469-25535 15535 15535-1 DESCRIPTION T-20 Torque Tool w/ Replaceable Tip Replacement T-20 Tip VALVE CORE TORQUE TOOL • Preset torque guarantees correc on all cores • Designed specifically for use with TPMS sensors • Prese to 3-4 in./lbs. • Can be used to install and remove cores in standar ASCOT NO. MFG. NO. 469-08288 AS-VCTT DESCRIPTION Valve Core Torque Tool SCREWDRIVER/CORE TOOL • Lock-On Feature For The Valve Core • Metal Pocket Clip • Flat-Head Screwdriver Tip 469-00673 168-00652 TPMS TORQUE WRENCHES AND SOCKETS • Perfect for tightening grommet nut to manufacturer specifications • Periodic calibration recommended ASCOT NO. MFG. NO. 168-00652 469-10215 469-10315 AS-652H TPMKT015-2 469-10215 DESCRIPTION 1/4" Drive Torque Wrench 10-150 In./Lbs. 11mm Chrome Socket TPMKT015-3 12mm Chrome Socket 469-10315 234 469-15535

235 VALVES & ACCESSORIES TPMS TOOLS METAL GROMMET REMOVAL TOOL • Makes grommet and metal washer installation/ removal easy and safe • Made in the USA MADE IN THE USA ASCOT NO. MFG. NO. DESCRIPTION 469-04700 4700 Metal Grommet Removal Tool 469-04700 469-20144 GROMMET INSTALLATION/ REMOVAL TOOL ASCOT NO. MFG. NO. 469-20144 20144 DESCRIPTION Grommet Installation/Removal Tool PRE-SET TORQUE TOOLS FOR TPMS • Never adjust a TPMS torque wrench again • Durable and long-lasting • NO MORE TORQUE ERRORS: It is either “Hi” or “Low” • Ergonomically designed hand grip • Open cross chamber on the 5565 allows for extra leverage bar TIRE DEFLATOR SETS • Simply replace a standard sized valve cap with this handy tool and the special design will depress the pin in the valve core • Large openings on the sides of the tool allow air to escape quickly from the tire • Tools are marked so tires can be returned to their original position on the vehicle so TPMS will not need to be reset • Also saves time since the valve core has not been removed from the sensor • Packaged in a set of 4 ASCOT NO. MFG. NO. DESCRIPTION 469-00021 TL-615 Tire Deflator/Valve Core Remover TIRE DEFLATOR/VALVE CORE REMOVER • Screws on TPMS valve stems to deflate the tire without removing the valve core 469-00021 469-05540 469-05565 469-51632 ASCOT NO. MFG. NO. 469-05540 469-05565 5540 5565 DESCRIPTION TPMS Preset Torque Tool: Preset at 40 in./lb. TPMS Preset Torque Tool: Preset at 65 in./lb. TPMS VALVE STEM FISHING TOOL • Secures TPMS sensor to wheel during demount • One handle end can be used as a deflator; the other as a core remover • 3" Overall length ASCOT NO. MFG. NO. 469-08910 8910 DESCRIPTION TPMS Valve Stem Fishing T CORE CAP REMOVAL TOOL • Easily installs and removes valve caps and valve cores • Two-in-one tool 469-03232 469-20250 ASCOT NO. MFG. NO. DESCRIPTION 469-20250 20250 Core/Cap Removal Tool ASCOT NO. MFG. NO. 469-51632 469-03232 TD-1808 3232D DESCRIPTION Color Coded Tire Deflator Set Ascot Tire Deflator Set For TPMS Valves 469-08910

VALVES & ACCESSORIES TPMS TPMS MECHANICAL TOOL KIT TOOLS TPMS MASTER TOOL KIT • Accurately and quickly install and remove any TPMS component • NO MORE TORQUE ERRORS: Simplest TPMS set available ASCOT NO. MFG. NO. 469-08200 8200 DILL NO. 4700 5540 5565 (w/ 5540 & 5565) 5414 5415 5417 5535 8910 NA N/A TYPE Grommet tool Speed Torque 40 IN-LB Speed Torque 65 IN-LB Valve Core Torque Tool Torque Screwdriver Beru Valve Holding Tool Torque Screwdriver 3-way Fishing Tool T-bar Case HEX REMOVAL KIT • Removes seized TPMS valve stems • Includes drill bit, drill guide, valve core remover, and O-rings DESCRIPTION Dill TPMS Master Tool Kit 469-08200 DESCRIPTION DILL TPMS MASTER TOOL KIT CONTENTS TPMS Easily remove and install TPMS valve stem grommets Fast and accurate TPMS installer for 50 in./lbs. and below Service Kits Fast and accurate TPMS installer for 50 in./lbs. and above Service Kits Drive Sockets 11mm and 12mm deep well sockets TPMS MECHANICAL TOOL KIT CONTENTS: Installs valve cores to recommended torque (3.5 in./lbs.) Torque T-10 screw installation, 12.5 in./lbs. (i.e. VS-950 rubber stem). Holds Beru valve in place for easy installation Torque T-20 screw installation, 35 in./lbs. (i.e. VS-80 rubber stem) Retains sensor in a secure position, deflates, removes the core May be used for extra leverage with the speed torque tools Hard plastic case to keep all of your items secure TPMS MECHANICAL TOOL KIT 469-04065 ASCOT NO. MFG. NO. 469-04065 4065 469-05010 ASCOT NO. MFG. NO. 469-05010 5010 DESCRIPTION Dill Hex Removal kit DESCRIPTION Dill TPMS Mechanical Tool Kit Deep Well 1/4" Drive DILL TPMS MECHANICAL TOOL KIT CONTENTS: 2 Sockets: 11mm & 12mm 40 in./lbs. Preset Torque Driver 65 in./lbs. Preset Torque Driver 1/4" Torque Screwdriver 10-80 in./lbs. Torque Valve Screwdriver 4 in./lbs. 2 Sockets: 11mm & 12mm 1/4" Adapter 4 Bits: T5, T10, T15 & T20 Grommet Tool ASCOT NO. MFG. NO. 469-10110 DESCRIPTION TPMKT01 TPMS Mechanical Tool Kit 469-10110 236 +/- 1% ACCURACY

237 VALVES & ACCESSORIES TPMS TRANSMITTERS SCHRADER OE REPLACEMENT TPMS SENSORS • Include transmitter, grommet, nut, cap & core ASCOT NO. MFG. NO. 461-21507 461-29020 461-29093 21507 O.E. NO. 321507 29020 Multiple 29093 68402371AA DESCRIPTION Snap-in For Buick Fixed Angle 315MHz Snap-in Basic Fixed Angle Ford 315MHz Snap-In Jeep/Chrysler 432Mz REDI-SENSOR MULTIAPPLICATION SENSOR • Patented • Installs right out of the box • Adjustable angle valve stem design • Made on OE equipment with OE components ASCOT NO. MFG. NO. DESCRIPTION 461-07005 461-07006 461-07007 461-07008 7007HP 7008HP 7005HPR Pre-programmed 433MHz Snap-in with VS-20 included 7006HPR Pre-programmed 315MHz Snap-in with VS-20 included Pre-programmed 315MHz Clamp-in with VS-70 included Pre-programmed 433MHz Clamp-in with VS-70 included 461-07006 461-07007 DILL 5000 SERIES • Made on OE equipment with OE components • Interchangable valve design ASCOT NO. MFG. NO. DESCRIPTION 461-05003 5003M 461-15003 5003R Dual-band TPMS sensor is programmable for 315 and 433MHz, offering over 95% vehicle coverage. Includes VS-240MC clamp-in valve; OE quality; Tested in USA Dual-band TPMS sensor is programmable for 315 and 433MHz, offering over 95% vehicle coverage. Includes VS-950 snap-in valve; OE quality; Tested in USA 461-15003 *USE THE MAKE/MODEL/YEAR LOOKUP GUIDE FOR MOST ACCURATE COVERAGE

VALVES & ACCESSORIES DILL REPLACEMENT TPMS TRANSMITTERS DILL TIRE PRESSURE MONITORING SYSTEM (TPMS) TRANSMITTERS • MOST INCLUDES: Transmitter, grommet, nut, cap & core 461-01043 ASCOT NO. MFG. NO. DESCRIPTION Huf BMW 1027 1029 1043 1045 1052 1055 1056 1203 1208 1209 1212 1214 1216 Entire Kia Spectra/Rio Siemens Chrysler Land Rover - 315 MHz Siemens Chrysler Siemens Land Rover/Jaguar Siemens Mazda Toyota - 40 Degree Angle Honda Accord/CRV/Fit Honda Pilot/Some Acura Honda Civic Honda/Acura Nissan 1217-WH Lexus SC 430 White 1218 1222 1225 1230 1241 1382 2168 2495 2510 2547 3166 3751 5134 Toyota Camry, Yari Hyundai Highlander/RAV4 RKE Toyota Camry Snap-in Toyota Nissan Titan XD Tesla Grand Cherokee SRT Kia Tucson/Sportage/Forte Tesla BLE Chevrolet Tahoe Honda Pilot Volvo 5256 BMW 5276 5310 5510 5511 5512 5513 5514 Land Rover Mazda Snap-in Hyundai Genesis/Santa Fe Honda/Acura Acura RDX Acura ILX Acura ILX/MDX//RDX/TLX 461-01027 461-01029 461-01043 461-01045 461-01052 461-01055 461-01056 461-01203 461-01208 461-01209 461-01212 461-01214 461-01216 461-01217 461-01218 461-01222 461-01225 461-01230 461-01241 461-01382 461-02168 461-02495 461-02510 461-02547 461-03166 461-03751 461-05134 461-05256 461-05276 461-05310 461-05510 461-05511 461-05512 461-05513 461-05514 *Use the Make/Model/Year lookup guide for most accurate coverage ASCOT NO. MFG. NO. DESCRIPTION 461-05523 461-05555 461-05556 461-05557 461-05558 461-05559 461-05775 461-06164 461-06561 461-06815 5523 5555 5556 5557 5558 5559 5775 6164 6561 6815 461-06825 461-06829 461-07659 461-09001 461-09002 461-09004 461-09005 461-09011 461-09012 461-09013 461-09017 461-09018 461-09204 461-09280 461-09342 461-09398 461-11204 461-11217 461-21217 461-31217 461-09364 461-09365 6825 6829 7659 9001 9002 9004 9005 9011 9012 9013 9017 9018 9204 9280 9342 9398 1204 1217-BL 1217-RD 1217-YL 9364 9365 Infiniti Q50 Nissan Rogue Dodge Dart GM 315MHz w/ TFA GM 433MHz w/ TFA Dodge Ram/Jeep Cherokee Snap-In Rubber Stem and Sensor for Inner Dual on Dodge Ram Clamp-In Stem and Sensor for Outer Alloy on Dodge Ram Front GM DRW Alloy HUF RDE 001 for Audi/ Mercedes - 433MHz HUF RDE 002 for BMW 3/5/7 Series - 433 MHz HUF RDE 004 for Mercedes HUF RDE 005 Cayenne/ Touareg - 433 MHz Audi BMW, Mini Cooper Volkswagen CC BMW 3-Series Panamara Nissan Ford Mustang/F-150 Series Nissan NV Chrysler Snap-In Toyota/Lexus Lexus SC 430 Blue Lexus SC 430 Red Lexus SC 430 Yellow 2023-2025 Ford F-600 (Steel Wheels) 2023-2025 Ford F-600 (Alloy Wheels) 461-09011 461-03166 461-02547 Hyundai Elantra/Kia Sportage Nissan Nissan Altima/Pathfinder Nissan 461-01241 238 461-07659 461-06815

WE MAKE PRODUCTS THAT KEEP AMERICA ROLLING VAL 239 HERE FOR THE TIRE REPAIR STAYED FOR THE RELEARN Tire Repair Materials & Chemicals TPMS; Tire Pressure Monitoring Systems Wheel Service Repair Tools & Accessories At 31 Incorporated, we manufacture and distribute tire repair materials, tire pressure monitoring systems and wheel service supplies professionals trust. From raw material to finished product, GROUP 31 INCORPORATED every step of our process is focused on quality, consistency, and performance. Proudly serving the automotive aftermarket industry since 1961. every step of our process is focused on NEWCOMERSTOWN, OHIO U.S.A.

VALVES & ACCESSORIES AFTERMARKET TPMS ACCESSORY KITS AFTERMARKET TPMS ACCESSORY KITS ASCOT NO. 468-17490 468-17491 468-17492 468-17493 468-17592 468-17593 468-17692 469-17107 469-17198 469-17205 469-17206 469-17207 469-17208 469-17209 469-17210 469-17211 469-17212 469-17213 469-17214 469-17215 469-17216 MFG. NO. 17-490T 17-490TY 17-492L-1 17-493NP 17-492T-1 17-493P 17-492LG-1 17-20107AK 17-20198AK DESCRIPTION TPMS High Temp (Red) Valve Core Nickel Plated TPMS High Temp Valve Core, Nickel Plated, YELLOW Band Long Skirted Black Plastic Cap with Seal for 17-20008 469-17223 Chrome Plated Plastic Cap, Green Top Gray Plastic TPMS Valve Cap with Red Silicone Seal Chrome Plated Plastic Cap Long Skirted GREEN Plastic Cap with Seal for 17-20008 TPMS Parts Kit for GM Applications TPMS Parts Kit for Dodge Sprinter Applications 17-20005AK TPMS Parts Kit for Nissan Applications 17-20006AK TPMS Parts Kit for GMC, Hummer, Isuzu Applications 17-20007AK TPMS Parts Kit for Nissan, Infiniti Applications 17-20008 GM TPMS Rubber Snap-In Valve 17-20009AK TPMS Parts Kit for Saab, Suzuki Applications 17-20010AK 17-20011AK 17-20012AK 17-20013AK 17-20014AK 17-20015AK 17-20016AK TPMS Parts Kit for Volvo Applications TPMS Parts Kit for Subaru Applications TPMS Parts Kit for Prowler, Corvette Applications TPMS Parts Kit for Dodge, Jeep, Chrysler Applications TPMS Parts Kit for Nissan, Infiniti Applications TPMS Parts Kit for GM with TRW Clamp-In Sensor TPMS Parts Kit for Mercedes, Smart Applications 469-17224 469-17226 469-17227 469-17228 469-17235 469-17236 469-17272 469-17275 469-17296 469-17311 469-17316 469-17317 469-17320 469-17321 469-17323 469-17420 468-17792 17-20203AK ASCOT NO. 469-17218 469-17221 469-17222 MFG. NO. 17-20018 17-20201AK 17-20202AK DESCRIPTION TPMS Ford Rubber Snap-In Valve TPMS Parts Kit for Chrysler, GM Applications TPMS Parts Kit for Audi, Mercedes, Volkswagen Applications TPMS Parts Kit for Audi, Mercedes Application 17-20204AK TPMS Parts Kit for Acura, Honda, Kia Applications 17-20206AK TPMS Parts Kit for Hyundai, Honda, Kia Applications 17-20207AK TPMS Parts Kit for Volkswagen Applications 17-20028AK TPMS Parts Kit for Chrysler, Dodge, Mitsubishi Applications 17-20035AK TPMS Parts Kit for Honda Applications 17-20036AK TPMS Parts Kit for Acura, Honda, Kia Applications 17-20720AK 17-20725AK TPMS Parts Kit for Conti OE Sensors & Redi-Sensor TPMS Service Kit with Valve 17-20096AK TPMS Parts Kit for Ford Applications 17-20211AK 17-20216AK 17-20217AK 17-20020 17-20221AK 17-20223AK TPMS Parts Kit for Misc. Import Applications TPMS Parts Kit for Lexus/ Toyota Applications TPMS Parts Kit for Lexus/ Toyota Applications TPMS Stem Only for Chrysler, Dodge, Mercedes TPMS Parts Kit for Lexus SC430 Applications TPMS Parts Kit for GM (SS Corvette) 17-20020AK TPMS Parts Kit + Stem for Chrysler, Dodge, Mercedes Applications 17-492-1 Black Plastic Valve Cap w/ Red Silicone Seal 469-17211 469-17210 469-17208 240 469-17275

241 VALVES & ACCESSORIES TPMS TRANSMITTERS AIRCHECK BLE An innovative TPMS Retrofit KIT with BLE sensors for Towable Trailers, Recreational Trailers, Motorhomes & Classic Cars • Single retrofit solution for car, trailer and recreational vehicles (Sensors, Repeater, App) • Up to 3 axles and dual tire configuration (+ spare tire) • Option to share the vehicles • Connected services through mobile app (e.g. Tire Fill Assist, Pressure by location) • Increased safety and comfort for end consumer 469-29500 Ascot No. Mfg. No. 469-53718 53718 469-53723 469-53707 469-29500 469-29500 53723 53707 Description Valve Mounted TPMS Sensor For Prevost and Volvo Buses Valve Mounted TPMS Sensor For Kenworth and Peterbilt Trucks Valve Mounted TPMS Sensor For Scania Trucks 29500-4 AirCheck BLE TPMS Retrofit Kit with 4 x BLE sensors and range extender 29500-2 AirCheck BLE TPMS Retrofit Kit with 2 x BLE sensors and range extender RETRO-PRO BLE RETROFIT KIT This brand-new app-based solution uses our innovative BLE (Bluetooth Low Energy) sensors to provide the ultimate retrofit solution for tire pressure monitoring on trailers, RVs, and non-TPMS-enabled passenger vehicles and light trucks. The Retro-Pro BLE provides real-time tire pressure and temperature data to keep you informed about the status of your tires, with audio alerts and visual notifications sent directly to your smartphone if any problems arise, so you can take immediate action to detect leaks and prevent tire blowouts. Offering superfast sensor configuration without the need for TPMS diagnostic tool, sensor setup and configuration is managed through the dedicated, free app available from the AppStore or Google Play, by simply scanning the QR code on the Retro-Pro BLE sensor for each wheel. Available with either 4 or 6 Retro-Pro BLE sensors to give you flexibility to meet your specific vehicles requirements, the Hamaton Retro-Pro BLE retrofit kit also includes: • 4 or 6 Retro-Pro BLE sensors (product number TBC). • 4 or 6 Retro-Pro BLE TPMS valve stems (product number TBC). • 2 rubber grommets per sensor in different sizes depending on your wheel size. • Hook and loop band mounting option for wheels up to 26” Ascot No. Mfg. No. 469-00101 Description HTS-RT01 Retro-Pro BLE Retrofit Kit 469-53718

VALVES & ACCESSORIES SMART SENSOR 469-43042 Universal Sensor with Aluminum Clamp-In Valve COMBINES 314.9 MHZ, 315 MHZ & 433.92 MHZ ALL IN ONE SENSOR • 99% Vehicle Application Coverage • Reduces TPMS Service Time • Reduces Inventory • Truly Universal/Programmable Sensor • Supports Future Vehicle Applications & Auto-Locate Technologies (WAL, PAL, LocSync) • Manufactured & Tested to OE Specifications & Quality/Performance Standards ASCOT NO. MFG. NO. 469-43041 17-43041 469-43042 17-43042 469-43046 17-43046 469-43047 17-43047 469-43048 17-43048 469-43049 17-43049 469-43050 17-43050 469-43052 17-43052 DESCRIPTION Smart Sensor with Rubber Snap-In Valve Smart Sensor with Aluminum Clamp-In Valve Snap-In Valve for Smart Sensor One Gloss Black Valve for Smart Sensor One Matte Black Valve for Smart Sensor One Aluminum Chrome Valve for Smart Sensor One Polished Chrome Valve for Smart Sensor One Valve Adapter for Smart Sensor ONE 469-43046 Snap-In Valve 469-43049 Clamp-In Valve 242 469-43041 Universal Sensor with Rubber Snap-In Valve 469-43046 Snap-In Valve 469-43047 Gloss Black Valve 469-43048 Matte Black Valve 469-43049 Aluminum Valve 469-43050 Polished Chrome Valve Multiple Replacement Valve Options Available 469-43052 Valve Adapter for Smart Sensor ONE SMART SENSOR ELITE PROGRAMMING & DIAGNOSTIC TOOL This revolutionary TPMS tool is an easy to use wireless programming and diagnostic tool all in one. 17-43800 Smart Senor ELITE Snap-In Bundle ASCOT NO. MFG. NO. DESCRIPTION 469-17438 17-43800 469-17439 17-43902 Smart Sensor ELITE Snap-In Kit Includes: 17-140 Smart Sensor Elite TPMS Tool with (16) 17-43041 Snap-In Smart Sensors Smart Sensor ELITE Clamp-In Kit Includes: 17-140 Smart Sensor Elite TPMS Tool With (16) 17-43042 Clamp-In Smart Sensors

243 VALVES & ACCESSORIES SMART SENSOR SMART SENSOR ELITE PROGRAMMING & DIAGNOSTIC TOOL This revolutionary TPMS tool is an easy to use wireless programming and diagnostic tool all in one. CONTENTS: • Smart Sensor Elite Programming and Diagnostic Tool • Micro USB Data Cable and Charger • Robust Commercial Grade, OBD II Cable • TPMS Activation Magnet FEATURES & BENEFITS: • Easy to follow interface on a 3.5" color display • Perform both stationary & OBD II relearns • Comprehensive relearn procedures built-in the tool • TPMS placard adjusting • VIN Code Scanner – Fast & Accurate • Read sensor IDs by OBD II & copy directly onto a Smart Sensor • WIRELESS: No cable necessary • Perform OBD II relearns • Greatly simplifies relearn process on Mitsubishi vehicles 469-17140 Smart Sensor ELITE Diagnostic/ Programming Tool ASCOT NO. MFG NO. 469-17140 17-140 469-17141 17-140-1 17141 Smart Sensor Elite th OBDII Module ASCOT NO. MFG. NO. DESCRIPTION 469-17141 17-140-1 Smart Sensor Elite Bluetooth OBDII Module 469-17142 17-140-2 469-17143 17-140-3 469-171404 17-140-4 469-17145 17-140-5 469-17440 17-44000 Scan For Video! 3.5" Color Display STATIONARY RELEARN Multilingual SMART SENSOR ELITE BLUETOOTH OBDII MODULE Screens & Support ESTACIONARIO REAPRENDER DESCRIPTION Smart Sensor ELITE Diagnostic/Programming Tool Kit Bluetooth OBD II Module for ELITE Tool Replacement Charger for ELITE Tool Replacement USB Charging Cable for ELITE Tool Replacement OBD II Cable for ELITE Tool Replacement Relearn Magnet for ELITE Tool Supplemental Placard Labels SMART SENSOR PRO+ PROGRAMMING/SCANNING TOOL • Easy to learn to use • Best value TPMS solution on the market • Scan sensors (pro+ is a diagnositc tool) • Copy/clone the original sensor • Updateable - lifetime FREE updates 469-17145 OBD II Module for Pro+ Tool ASCOT NO. MFG. NO. 469-17144 17-144 469-17145 17-144-2 469-17444 17-144-4 469-17445 17-144-5 DESCRIPTION Pro+ Diagnostic/Programming Tool OBD II Module for Pro+ Tool Replacement Charger for 17-144 Pro+ Tool Replacement OBD II Cable for 17-144-2 OBD II Module 469-17144 Pro+ Diagnostic/ Programming Tool

VALVES & ACCESSORIES TUBELESS TIRE SNAP-IN TUBELESS TIRE VALVES • Dill, Schrader or equivalent available ASCOT NO. TR NO. 461-00438 461-00412 461-00413 461-00414 461-00418 461-00423 EFFECTIVE LENGTH FOR .346" VALVE HOLES 438 1.2" FOR .453" VALVE HOLES 7/8" 412 413 414 418 423 461-00415 461-00425 415 425 1-1/4" 1-1/2" 2" 2-1/2" FOR .625" VALVE HOLES 1.25" 2" TR414 TR418 TR423 TR438 CHROME-SLEEVE SNAP-IN TYPE TUBELESS TIRE VALVES • Standard snap-in type tubeless tire valves are fitted with an attractively designed hexagon valve cap and chrome sleeve to cover the valve stem area • Available in two lengths to fit .453" valve holes ASCOT NO. TR NO. 461-41211 461-41311 412SC 413SC EFFECTIVE LENGTH 7/8" 1-1/4" HIGH PRESSURE SNAP-IN VALVES • Tubeless snap-in type valves for high pressure applications • Maximum cold inflation pressure is 80 PSI • For .453" or .625" rim holes • Do not use on tire rims that exceed .205" in thickness at the valve hole ASCOT NO. TR NO. 461-00600 461-00602 461-00801 461-00611 EFFECTIVE LENGTH 600HP 1.27" 602HP 801HP 2" 1.25" 600XHP 1.27" VALVE HOLE DIAMETER .453" .453" .625" .453" CLAMP-IN TUBELESS TIRE VALVES • Nickel plated metal valves can be installed in all passenger cars, light trucks and industrial rims with .453" or .625" valve holes • Rubber grommet forms a seal when valve is clamped to rim by tightening hex nut • Maximum inflation pressure is 200 PSI • Includes 2 rubber grommets ASCOT NO. TR NO. EFFECTIVE LENGTH 462-00416 462-02416 461-02416 416 416 416L 2.2" ! CAUTION 1.4" Small Grommet 1.4" Large Grommet 462-02416 462-00416 461-00600 COMING FALL 2026! 461-00602 ENKEI VALVES • A high performance “No Show” type chrome plated valve that installs from the outside • A rubber washer and nut are on the inside • Fits .453" diameter hole ASCOT NO. HALTEC NO. DILL NO. 462-06010 462-06020 462-06030 462-06040 DESCRIPTION 462-06020 TV-6010 VS-934E 3/4" Length, Standard TV-6020 VS-933E Bent at 45° Angle TV-6030 VS-936E 1-1/4" Length, Standard TV-6040 VS-935E 1-3/4" Length, Standard IMPORTANT: Snap-in passenger valve stems are safe for tire pressures up to a maximum of 65 PSI (cold tire pressure) and for a maximum rim thickness of .156” (3.9mm). If greater pressure or rim thickness is required, metal clamp-in valve stems are recommended. 461-41311 HIGH PERFORMANCE VALVE • Chrome plated clamp-in valves are easily installed in all types of passenger car wheels • For .453" valve holes ASCOT NO. MFG NO. 462-00800 DESCRIPTION TV-575-HP High Performance Valve USA 462-00800 REPLACEMENT GROMMETS • Replacement grommets for .453" and .625" valve holes ASCOT NO. TR NO. EFFECTIVE LENGTH 468-59765 468-99393 RG-54 RG-39 Grommet for .453" Hole Grommet for .625" Hole 468-99393 ASCOT NO. HALTEC NO. DILL NO. 468-00401 TV-401 EFFECTIVE LENGTH 02500 1" 461-00600 VALVES (PASSENGER) TANK VALVE Dill Signature Cap TR412 TR415 TR413 • Utilized on pressure containers where guaging or servicing may be required • Tank valves are used with various gases, fluids and operating pressures • 1/8-27 NPT thread • Nickel plated • 100 per bag 244 462-06040

245 VALVES & ACCESSORIES TUBELESS TIRE VALVES (TRUCK) TRUCK & BUS TUBELESS TIRE VALVES: 570 SERIES • Used on both demountable and non-demountable rims with standard 5/8" (.625") side hole valve mountings • Heavy duty rubber grommet forms airtight seal when valve is clamped in rim by tightening the hex nut • Eight valves cover all truck rim requirements ASCOT NO. TR NO. 463-00501 463-00572 463-00573 501 572 573 EFFECTIVE LENGTH 1-1/2" 3-3/4" 4-3/8" AIR/LIQUID VALVE: 1-7/8" ASCOT NO. TR NO. EFFECTIVE LENGTH 464-00618 618A 1" 464-00618 463-00501 463-00572 463-00573 ALUMINUM WHEEL TRUCK TUBELESS TIRE VALVES: 540 & 550 SERIES CLAMP-IN TIRE VALVES • Designed for use with 9.7mm (.382") rim hole • Rubber O-ring forms a seal when valve is clamped to rim by tightening hex nut • Designed specifically for use in aluminum wheels • 550 Series equipped with rubber grommet ASCOT NO. TR NO. 462-11147 463-00500 463-00575 463-05454 Ascot No. 463-05454 Ascot No. 463-01555 TR No. 545D A 540 SERIES 0.98" TR No. 555D A 550 SERIES 0.98" 2.60" 60˚ B 2.60" B C 463-05434 60˚ 463-05435 C 463-05444 TR544D TR543E TR543D 463-01555 463-02554 TR554D DESCRIPTION ASN-1147 TR500 TR575 Radial Commander Valve Clamp-In Tire Valve for .625” Rim Hole – 2” Clamp-In Tire Valve for .625” Rim Hole – 1-1/8” Aluminum Clamp-In Valve for .382” Rim Hole– 1.94” Aluminum Clamp-In Valve for .382” Rim Hole– 1.38” Aluminum Clamp-In Valve for .382” Rim Hole– 1.38” Aluminum Clamp-In Valve for .382” Rim Hole– 1.94” 468-00707

VALVES & ACCESSORIES TRUCK & SPECIALTY VALVES ALUMINUM WHEEL TRUCK TUBELESS TIRE VALVES: 540 & 550 SERIES • Designed for use with 9.7mm (.382") rim hole • Rubber O-ring forms a seal when valve is clamped to rim by tightening hex nut • Designed specifically for use in aluminum wheels • 550 Series equipped with rubber grommet Ascot No. TR No. A B C 540 SERIES 463-10542 TV-542 1.25” 463-10543 TV-543 2.29” - - 463-11543 TV-543C 0.93” 1.38” - - 45° 463-12543 TV-543D 0.98” 1.38” 60° 463-13543 TV-543E 0.98” 1.38” 463-10544 TV-544 2.85” 463-11544 TV-544C 1” - 75° - 1.93” 45° 463-12544 TV-544D 0.98” 1.94” 60° 463-10545 TV-545 3.50” - 463-11545 TV-545C 0.98” 2.60” 36° 463-12545 TV-545D 0.98” 2.60” 60° 463-13545 TV-545E 0.98” 2.60” 75° 463-10546 TV-546D 0.98” 3.35” 60° 463-11546 TV-546E 0.98” 3.35” 75° TRUCK BRASS 570 SERIES •Straight clamp-in valves used on both demountable and non-demountable rims • For .625” diameter valve hole. Bent valve stems also available • Haltec custom bends the TV-570 series valves - 462-16008 TV-6008 Tractor Front Wheel Valve With Brass Finish RADIAL COMMANDER VALVE FOR 15" DISC WHEELS • 23° bend clamp-down valve for .625" valve hole • Bend allows clearance of brake drum for tire service Ascot No. Mfg No. Description 462-01147 N-1147 462-01224 N-1147L Radial Commander Valve. Made in the USA. Longer Radial Commander Valve for Equal Applications TRUCK/BUS SCREW-ON REPAIR VALVES Ascot No. Mfg No. 463-10500 TV-500 463-10501 TV-501 463-10570 TV-570 463-10571 463-10572 463-10573 463-10574 463-10575 TV-571 TV-572 TV-573 TV-574 TV-575 Effective Length 2” 1-1/2” 3-1/8” 3-3/8” 3-3/4” 4-3/8” 5” 1-1/8” 463-11572 TV-572F-19 3-3/4” • Replace damaged cured-in or cured-on valves without cutting out old valve base • 1-1/16" horizontal diameter Ascot No. TR No. A B C 550 SERIES 463-10552 TV-552 1.26” 463-10553 TV-553 2.31” - - - - 463-11553 TV-553C 0.93” 1.38” 45° 463-12553 TV-553E 0.98” 1.38” 75° 463-10554 TV-554D 0.98” 1.94” 60° 463-10555 TV-555D 0.98” 2.60” 60° 463-11555 TV-555E 0.98” 2.60” 75° ALUMINUM DISC VALVES 509/510 • Truck valves for aluminum truck wheels • Tubeless valves used in drop-center aluminum disc wheels with .625 valve hole • Rubber grommet available (part #G-172) Ascot No. Mfg No. 463-10509 TV-509 463-10510 TV-510 Effective Length 4-3/4” 5-1/2” TRACTOR FRONT WHEEL VALVES • Low profile valve offers minimum protrusion above the rim • 9/16" effective length with chrome finish • .625" valve holes 462-06008 Ascot No. Mfg No. Description 462-06008 TV-6008C Tractor Front Wheel Valve With Chrome Finish 246 Ascot No. Mfg No. Effective Length 463-01177 1177A 3-3/4" 463-01175 1175A 4-1/2" 463-01078 1078A 5" 463-01078

247 VALVES & ACCESSORIES TRUCK & SPECIALTY VALVES FORD “F” SERIES TRUCK VALVE • Ford “F” series with dual wheels • Alcoa aluminum 16" • Front and rear wheels • Chrome finish • Includes dual seal cap FORD “F” SERIES TRUCK VALVE Ascot No. Mfg No. 462-01600 N-1600 Description Ford “F” Series Truck Valve 462-01600 Ascot No. Mfg No. FORD “F” SERIES VALVE • Ford “F” series with dual wheels • Accuride steel 19.5" • Front and rear wheels • Nickel finish • Includes dual seal cap TV-550 SERIES TPMS READY VALVES Ascot No. Mfg No. Description 462-03416 TV-416/DS-1 Ford “F” Series Valve 462-03416 • Standard bore valve compatible with industry recognized chucks, inflation systems • Ready for installing tire pressure measurment sensors (TPMS) with M6 tapped threads for TPMS installation • Suitable for usage with aluminum wheels • Standard nickel-plated finish • Available optional color as black denoted as - BLK suffix in model name • Max operating pressure: 200 PSI • Operating temperature range -40°C to 125°C FORD “CUT-AWAY” SERIES VALVE • Ford “cut-away” series with dual wheels • Accuride steel 16" x 16" wheels • Front and rear wheels • Nickel finish • Includes dual seal cap Description 462-02416 TV-416MC Ford “F” Series Valve 462-02416 • Ford “F” series with dual wheels • Accuride steel 16" x 16" • Front and rear wheels • Nickel finish • Includes dual seal cap Ascot No. Mfg No. 462-01416 TV-416LF Description Ford “F” Series Valve 462-01416 Ascot No. Mfg No. 463-10552 TPMS-552T FORD “CUT-AWAY” AND CARGO VAN SERIES VALVE • Ford “cut-away” and Cargo van series with single rear wheels • Accuride steel 16" x 7" wheels • Front and rear wheels • Chrome Finish Ascot No. Mfg No. 462-01575 TV-575HP/ DS-1 Description Ford “Cut-Away” & Cargo Van Series 462-01575 Description TV-552 TPMS Ready 463-10554 TPMS-554D TV-554 TPMS Ready 463-10555 TPMS-555D TV-555D TPMS Ready 463-11554 TPMS-554E 463-10553 TPMS-553E 463-11553 TPMS-553 463-12553 TPMS-553C 463-10554 TPMS-554C 463-10600 TPMS-60MS-00 TV-554E TPMS Ready TV-553E TPMS Ready TV-553 TPMS Ready TV-553C TPMS Ready TV-554C TPMS Ready 60-MS-00 TPMS Ready

VALVES & ACCESSORIES TRUCK & ALUMINUM WHEEL TRUCK TUBELESS TIRE VALVES: 540 & 550 SERIES • Designed for use with 9.7mm (.382") rim hole • Rubber O-ring forms a seal when valve is clamped to rim by tightening hex nut • Designed specifically for use in aluminum wheels • 550 Series equipped with rubber grommet Ascot No. TR No. A B C 540 SERIES 463-20542 VS-542 1.25” 463-20543 VS-543 2.29” - - 463-21543 VS-543C 0.93” 1.38” - - 45° 463-22543 VS-543D 0.98” 1.38” 60° 463-23543 VS-543E 0.98” 1.38” 463-20544 VS-544 2.85” 463-21544 VS-544C 1” - 75° - 1.93” 45° 463-22544 VS-544D 0.98” 1.94” 60° 463-20545 VS-545 3.50” - 463-21545 VS-545C 0.98” 2.60” 36° 463-22545 VS-545D 0.98” 2.60” 60° 463-23545 VS-545E 0.98” 2.60” 75° 463-20546 VS-546D 0.98” 3.35” 60° 463-21546 VS-546E 0.98” 3.35” 75° METRIC RIM HOLE VALVES (9.7MM VALVE HOLE) • Some imported trucks will have steel wheels that incorporate the 9.7mm valve hole (.382") • Most popular valves for this application • Other sizes available upon request Ascot No. MFG No. ETRTO Bend A B 463-20707 70MS-7 V3.22.6 7° 1.28” 1.10” 463-20551 VS-551 463-20201 V3-201 - V3.20.1 27° 0.99” 1.42” - 1.19” - 463-20204 V3-204 V3.20.4 27° 0.98” 2.36” 463-20205 V3-205 V3.20.5 463-20207 V3-207 V3.20.7 27° 0.98” 1.57” 27° 0.98” ALUMINUM DISC VALVES 509/510 1.97” Ascot No. Mfg. No. 463-01571 VS-571-EQ 463-01572 Description 469-02572 O-Ring Silicone Truck Valve for TR571 463-01572 VS-572-EQ O-Ring Silicone Truck Valve for TR572 463-01573 VS-573-EQ O-Ring Silicone Truck Valve for TR573 469-02570 VS-570EQ 469-02572 VS-572EQ-13 O-Ring Silicone Truck Valve for TR572 - 13° Bend 469-02573 VS-573EQ-13 O-Ring Silicone Truck Valve for TR573 - 13° Bend REPLACEMENT VALVE COMPONENTS Ascot No. Mfg No. 463-20879 VS-879 463-20946 VS-946 463-20949 VS-949 Description 90° Truck Valve For Aluminum Disc Wheels 90° Truck Valve For Aluminum Disc Wheels 90° Truck Valve For Aluminum Disc Wheels Ascot No. Dill No. Description 468-00103 100-TB Dill Replacement Core 468-00462 462G 468-00765 765 468-01462 462-F 468-02462 468-05952 468-05953 462 595-2 595-3 468-05954 595-4 Dill Green High Temp Grommet Dill Replacement Dome Cap Dill Red High Temp Grommet (-50F to 400F) Dill Black Rubber Grommet Replacement Washer Replacement Grommet Replacement Hex Nut - 463-20552 VS-552 1.26” 463-20553 VS-553 2.31” - - - - 463-21553 VS-553C 0.93” 1.38” 45° 463-22553 VS-553E 0.98” 1.38” 75° 463-20554 VS-554D 0.98” 1.94” 60° 463-20555 VS-555D 0.98” 2.60” 60° 463-21555 VS-555E 0.98” 2.60” 75° 463-20570 VS-570-R 3.13” 463-20571 VS-571-R 3.38” 463-20752 VS-572-R 3.75” 463-21572 VS-572-F19 3.75” w/ 31° Bend 463-20573 VS-573-R 4.38” 463-20754 VS-574R 5.00” Ascot No. TR No. A B C 550 SERIES SPECIALTY VALVES TRUCK & BUS TUBELESS TIRE VALVES: 500/570 SERIES • Used on both demountable and nondemountable rims with standard 5/8" (.625") side hole valve mountings • Heavy duty rubber grommet forms airtight seal when valve is clamped in rim by tightening the hex nut • Eight valves cover all truck rim requirements • Available in custom bends Ascot No. TR No. Effective Length 248 O-RING SEAL SILICONE TRUCK VALVES • Handles any type of high temp application • Operating temperature from -67˚F to 500˚F • Seals between the rim and valve more effectively • REPLACEMENT O-RINGS AVAILABLE: RG-150 (468-30015) O-Ring Silicone Truck Valve for TR570

249 VALVES & ACCESSORIES TRUCK & SPECIALTY VALVES ALUMINUM WHEEL TRUCK TUBELESS TIRE VALVES: 540 & 550 SERIES • Premium nickel-plated brass provides increased stem hardness and overall superb corrosion protection • Advanced Sealing Concept (ASC) valves incorporate a specialty rubber grommet and uniquely designed, pocketed valve base, to deliver greater tolerance acceptance for bore hole variances and superior high temperature resistance • VMQ red rubber grommets and O-rings (T540x & TR55x) support extreme heat ranges (-75° to 550° F) and superior chemical abrasion resistance for Alcoa and Accuride rims TRUCK & BUS TUBELESS TIRE VALVES: 550 & 570 SERIES • Consistent, high-malleability, brass is used for each component (stem, nut and washer) delivering increased corrosion resistance • Precision matched threads (stem and nut) ensure max torque values can be achieved, upwards of 450 in-lbs of torque has been reached during testing without failure • Air flow rates on all ALLIGATOR commercial valves set the standard within the industry, with upwards of 15% increased speed for inflating and deflating versus the competition • Proprietary, anti-rotation grommets are manufactured from EPDM or FMK rubber to provide stellar surface conformance, maximum torque-load ability and superb heat-resistance • Made in Europe with premium German designs • Pair with The Original V2B™ to deliver results mile after mile Ascot No. TR No. 463-51602 TR500 463-51622 463-51112 TR501 463-52192 TR570 463-52692 TR571 463-53192 TR572 463-53692 TR573 463-54192 TR574 Ascot No. TR No. Mfg. No. A B 540 SERIES 463-97720 TR542 097720 1.25" 463-97225 TR543 097725 2.31" - - 463-97226 TR543C 097726 0.93" 1.38” 463-97227 TR543D 097727 0.98” 1.38” 463-97228 TR543E 097728 0.98” 1.38” 463-97733 TR544 097733 2.85" - 463-97734 TR544D 097734 0.98" 1.94” 463-97738 TR545 097738 3.50" - 463-79677 TR545D 779677 0.98" 2.60” 463-97739 TR545E 097739 0.98" 2.60” 463-97745 TR546 097745 4.27" 2.60” 463-97746 TR546C 097746 0.98" 3.35” 463-97747 TR546D 097747 0.98" 3.35” 463-97748 TR546E 097748 0.98" 3.35” 463-77085 TR546-115 770085 0.98" 3.35” 463-97752 TR547D 097752 0.98" 3.78” Ascot No. TR No. Mfg No. A 463-73005 41-MS-00 773005 1.38” 463-79785 60-MS-27 779785 0.98” 463-79786 70-MS-27 779786 0.98” 463-79117 80-MS-27 779117 0.98” 463-79560 90-MS-27 779560 0.98” 463-74196 115-MS-27 774196 0.98” Ascot No. TR No. Mfg. No. A B 550 SERIES 453-71510 TR552 771510 1.25” 463-71515 TR553 771515 2.31” - - 463-71520 TR553C 771520 0.93” 1.38” 463-71525 TR553D 771525 0.98” 1.38” 463-71530 TR553E 771530 0.98” 1.38” 463-71540 TR554D 771540 0.98” 1.94” 463-71550 TR555D 771550 0.98” 2.60” 463-71555 TR555E 771555 0.98” 2.60” METRIC RIM HOLE VALVES (9.7MM VALVE HOLE) • Some imported trucks will have steel wheels that incorporate the 9.7mm valve hole (.382") • Most popular valves for this application • Other sizes available upon request Mfg. No. TR500 (23°) 751622 751112 Effective Length 751602 2.00” 1.02” 1.50” 752192 3.13” 752692 3.38” 753192 3.75” 753692 4.38” 754192 5.00”

VALVES & ACCESSORIES VALVE & COMBINATION WRENCHES VALVE STEM WRENCH KIT • Kit includes 9/16" & 5/8" valve stem wrenches in durable pouch STUBBY FLEX HEAD COMBINATION WRENCHES • Needs as little as 5 degrees to move a fastener • 180 degree flex action head s • Short pattern along with the slim head and body allow the stubby wrenches into places where no other wrench will work • 12 point ratchet ring • Enhanced open end design that prevents fastener rounding • Size stamped on wrench for ease of identification • Ideal for use with TR540-550 & TR570 series clamp-in tire valves • Made in TW 469-01820 250 DURABLE POUCH ASCOT NO. MFG. NO. 469-01820 469-00018 469-00020 DESCRIPTION ASCOT NO. MFG. NO. 313-00058 313-00916 VSW-1820-KIT Valve Stem Wrench Kit VSW-18 VSW-20 9/16" Single Hex Valve Stem Wrench 5/8" Double Hex Valve Stem Wrench 58SFHCW 5/8" Stubby Flex Head Combination Wrench 916SFHCW 9/16" Stubby Flex Head Combination Wrench FLEX HEAD OPEN END COMBINATION WRENCHES VALVE NUT TORQUE WRENCHES • Wrench flexes when proper torque setting is reached • Prevents overtightening of the valve grommet • Cushioned handle • Sizes and preset torque settings laser etched on shaft • 9/16" for TR570 series valve hex nuts • 5/8" for TR540-550 series valve hex nuts • +/- 4% accuracy 168-00058 • Flex head capable of tilting 180 degrees • 72 teeth with double stack pawls to provide 144 tips (ratcheting positions) • 2.5-degree space requirement for each turn • Made with chrome vanadium steel • Designed for working in confined space • Meets ANSI specification • Professional plating to prevent corrosion • Ratcheting head allows fastener to travel without removing the ratchet head • Non-slip open end allows 4 contact points, conventional open end offers 2 contact points • 12-point box end with ratcheting function • Made in Taiwan +/-4% ACCURACY DESCRIPTION 168-00916 ASCOT NO. MFG. NO. 168-00916 DESCRIPTION NSPTW916 9/16" Preset Valve Torque Wrench - 42 in./lb. 168-00058 NSPTW58 5/8" Preset Valve Torque Wrench - 100 in./lb. ASCOT NO. MFG. NO. 313-01916 313-00158 DESCRIPTION 916FHOECW 9/16" Flex Head Open End Combination Wrench 58FHOECW 5/8" Flex Head Open End Combination Wrench 313-01916 313-00158 313-00058 313-00916

251 VALVES & ACCESSORIES TRUCK & SPECIALTY VALVES NUT SPLITTER • Removes brass tire valves from truck rims • Available in manual and pneumatic DILL TRUCK VALVE TOOL KIT • Tool Kit for alloy and steel truck wheels • Allows you to accurately inspect, gauge and install truck valves with pre-set torque tools • Follows industry guidelines and valve hole measurements 469-00580 ASCOT NO. MFG. NO. 469-00580 NS58B DESCRIPTION Manual Nut Splitter ASCOT NO. MFG. NO. 469-05700 469-05720 5700 5720 469-15720 VALVE BLASTER TRUCK VALVE STEM REMOVAL TOOL • Removes valves quickly • Slide hammer with an internal spring absorbs the shock of impact • Easy to use • Designed to sheer the bottom flange off the valve with one or two blows • OAL - 63" 469-22011 ASCOT NO. MFG. NO. 469-22011 469-22012 VB RE DESCRIPTION Valve Blaster Truck Valve Stem Removal Tool Replaceable End for Valve Blaster Truck Stem Removal Tool R DESCRIPTION Dill Truck Valve Tool Kit w/ 2 Open-End Torque Tools Dill Truck Valve Tool Kit w/ 1 OpenEnd and 1 Straight Torque Tool 5720-Poster Wall Poster of Accurate Truck Valve Installation and Inspection Processes VALVE BREAKER • Removes valves quickly • Slide hammer with an internal spring absorbs the shock of impact • Easy to use • Designed to sheer the bottom flange off the valve with one or two blows 469-32011 ASCOT NO. MFG NO. 469-35934 469-32011 469-32012 35934 35936 35935 DESCRIPTION 27" Valve Breaker 45" Valve Breaker Valve Breaker Parts Kit

VALVES & ACCESSORIES VALVE CAPS, CORES & EXTENSIONS THE ORIGINAL ALLIGATOR V2B DUAL SEAL CAP • Made in Germany by Alligator • Increased tire life • Lower fuel consumption • Safety for driver and vehicle ASCOT NO. MFG. NO. DESCRIPTION 468-02222 QTY./BOX 468-02222 V2B-50 Alligator V2B Dual Seal Cap 50 468-12222 DOUBLE SEALING VALVE CAPS • Light weight design uses both high temperature and low temperature resistant airtight seals at extension tip and valve mouth • External grooves accommodate all industry standard air chucks and gauges • Knurled surface for easy hand installation • Increases productivity • MADE & TESTED IN THE USA ASCOT NO. MFG. NO. DESCRIPTION 468-06541 468-36541 6541N 6541B 468-46541 6541N QTY./ BOX Double Seal Valve Cap 50 Double Seal Valve Cap, Brass Double Seal Valve Cap, Nickel, Threaded 500 50, 250 or 500 MADE IN THE USA V2B-250 Alligator V2B Dual Seal Cap 250 ASCOT ELECTROLESS VALVE CORES • Nickel plated for use with aluminum TPMS valves • Temperature rated up to 150 degrees • 100 Per Box ASCOT NO. 468-09000 MFG. NO. VC-9000 DESCRIPTION PASSENGER VALVE CAPS • Fits .305"-32" threads on standard type valves 468-09000 Ascot Electroless Nickel-Plated High-Temperature Valve Cores STANDARD VALVE CORES • STANDARD PACK QUANTITY: 100 468-09002 OPERATING ASCOT NO. MFG. NO. 468-09002 468-08500 9002 8500TV PRESSURE RANGE Up to 300 PSI Max 0-200 PSI - Peaks Of 300 468-08500 OPERATING TEMP RANGE (F) -65° To +250°F -40° To +225°F OPENING PRESSURE 80 PSIG 60 PSIG 252 468-00660 468-00680 ASCOT NO. MFG. NO. 468-00107 468-00207 468-00660 468-00680 Cap-P CAP-PG VC8 680 468-00690 468-05005 468-59019 468-59021 DOUBLE SEAL CAP • A time, money and labor saving alternative to common valve caps • Reduce pressure check time by 65% • Designed for high pressure truck tire service • Inflate,deflate or gauge directly thru the DS-1 saving time during inflation and pressure checks • Automatic inflation systems lock right onto the DS-1 • Performs like a check valve, the seal becomes tighter in the event of a core failure • Heat resistant grommets • Features tough all metal housing, precision fit brass components and durable self-sealing O-Ring 468-04191 ASCOT NO. MFG. NO. 468-04191 DS-1 DESCRIPTION Double Seal Cap TRUCK VALVE CAPS 468-00102 ASCOT NO. MFG. NO. 468-00765 765 468-00632 468-00102 632 6300V DESCRIPTION Dill Dome Cap Dill High Temp Dome Cap All Purpose Cap With Screwdriver Top For Removing/ Inserting Valve Cores TR NO. VC3 VC3 VC2 468-00632 SEALING WASHER MATERIAL Nitrile Plastic Nitrile OPERATING PRESSURE 468-00765 OPERATING TEMP RANGE (F) 0-200 PSI -40° To +165°F PACK SIZE FINISH 100 Nickel Plated 100 PSI -40° To +250°F 100 Nickel Plated 0-200 PSI -40° To +165°F 100 Nickel Plated 690 2413CS 59-0019 59-0021 468-00690 DESCRIPTION Plastic Valve Cap Green Plastic Nitrogen Cap Standard Black Plastic Valve Cap N2 Aluminum Cap for TPMS With Adhesive Green Ring N2 Plastic Painted Metalic Silver Cap for TPMS With Adhesive N2 Combination Cap/Sleeve for TR413 Green Nitrogen Indicating Aluminum Valve Cap 468-05005 468-59019 TR NO. PACK SIZE 100 100 — — VC8 — — TR413 — Chrome Plated Nitrogen Indicating Brass Valve Cap — — 100 — 468-59021 FINISH Plastic Plastic Plastic 100 Aluminum Plastic Chrome 100 Aluminum 100 Aluminum 468-46541 468-26451 468-36541

253 VALVES & ACCESSORIES VALVE CAPS, CORES & EXTENSIONS PASSENGER CAR EXTENSIONS PASSENGER VALVE CAPS • Provides a seal against contaminants while extending the valve mouth for convenient access ASCOT NO. MFG. NO. 468-00686 468-06300 468-00635 ASCOT NO. MFG. NO. DESCRIPTION 468-06300 468-00635 468-00650 630N 635 650 468-00650 QTY./ BOX Gray Plastic TPMS Cap (Tall) 100 Black Plastic TPMS Cap for VS950 Applications 100 Gray Plastic TPMS Cap (Short) 100 468-62411 DUAL WHEEL EXTENSIONS • For convenient air service access to inner rear dual wheels • Fit standard valve cap threads and include a clip to secure the extension to the wheel cutout • Can be used on campers, recreational vehicles and light trucks ASCOT NO. MFG. NO. EFF. LENGTH 468-10017 468-10019 468-10012 468-10010 9059-7 9059-9 9059-12 9059-U 7" 9" 12" 12" DILL NICKEL BRASS EXTENSIONS ASCOT NO. MFG. NO. BEND 468-01370 468-01345 468-01390 468-01335 370 345 390 335 180° 45° 90° 135° 45mm 45mm 45mm 468-10012 DILL TRUCK VALVE EXTENSIONS • Extensions screw onto the standard .305" valve cap threads of the valve stem and make valve mouth accessible for air service • Available in various lengths ASCOT NO. MFG. NO. 468-00330 468-00331 468-00341 468-00346 468-00347 468-00348 468-00349 468-00350 468-00356 EFF. LENGTH 34.79mm DILL LIGHTWEIGHT TRUCK VALVE EXTENSIONS • Made from nickel plated brass • Provide the additional length necessary to inflate, deflate or gauge tires with valves hidden by decorative wheel covers • Lightweight ASCOT NO. MFG. NO. 468-01032 468-01370 468-01345 468-01033 468-01034 468-01035 468-01037 468-01038 468-01039 468-01390 468-01335 468-01039 1032 1033 1034 1035 1037 1038 1039 COLLAR TYPE Short 3/8" Short 3/8" Short 3/8" Short 3/8" Long 1" Long 1" Long 1" EFF. LENGTH 2" 2.93" 3.93" 5.12" 2.93" 5.12" 6" EFFECTIVE LENGTH STRAIGHT METAL EXTENSIONS 330 331 341 346 347 348 349 350 356 4" 3" 4-7/16" 1-1/16" 3-1/16" 5-1/16" 6-1/16" 2.19" 1-3/8" 468-00687 468-00688 468-62410 468-62411 468-62412 468-62413 686-P 687-P 688-P 6241-B 6241-M 6241-J 6241-G FINISH Nylon Nylon Nylon Ni-Plated Brass Ni-Plated Brass Ni-Plated Brass Ni-Plated Brass EFF. LENGTH .75" 1.00" 1.25" .50" .75" 1.25" 1.50" 468-00685 468-00347 468-01038

VALVES & ACCESSORIES VALVE CAPS, CORES & EXTENSIONS VALVE ACCESSORIES ASCOT NO. TR. NO. FITS THREAD FOR USES ON HEX NUTS 468-10013 468-10004 468-10117 468-00808 468-10015 468-11700 468-10046 468-10039 468-10054 468-10060 HN-13 HN-17 RW-8 RG-15 G-170S RG-46 RG-39 RG-54 .406"-28 HN-4 .406"-28 .406"-28 .406"-28 GROMMETS .625" .625" .625" .625" .453" O-RING RG-60 .328" TR540 Series TR570 Series TR416 TR509, 510 TV500 & TV570 Series TR570 Series Heat Resistant for TV570 TR509, 510 TR416 TR416 468-10060 468-10046 DUAL WHEEL FLEXIBLE VALVE EXTENSIONS • Provide easy access to the inner dual tir found on campers, recreational vehicles and light trucks • Fit standard valve cap threads • Come with clamp to secure extension to wheel cutout • 2 extensions per pack and available in steel braided hose ASCOT NO. MFG. NO. 468-30007 468-30010 468-40007 468-40010 468-90597 468-90599 468-95911 9059-7 9059-9 9059-11 DESCRIPTION FE-300-7 FE-300-9 SFE-400-7 Flexible Extension Flexible Extension Steel Braided Extension SFE-400-10 Steel Braided Extension Reinforced Rubber Hose Reinforced Rubber Hose Reinforced Rubber Hose EFF. LENGTH 7" 9" 7" 10" 7" 9" 11" 468-00381 468-00382 468-00383 HE-381 HE-382 HE-383 468-30007 ASCOT NO. MFG. NO. COLLAR TYPE EFF. LENGTH 468-00370 468-00371 468-00372 468-00373 468-00389 468-00390 468-00391 468-00392 468-00393 468-00394 468-00395 468-00396 468-00397 HE-370 HE-371 HE-372 HE-373 HE-389 HE-390 HE-391 HE-392 HE-393 HE-394 HE-395 HE-396 HE-397 Short 3/8" Short 3/8" Short 3/8" Short 3/8" Long 1" Long 1" Long 1" Long 1" Long 1" Long 1" Long 1" Long 1" Long 1" STANDARD STYLE Long 1" Long 1" Long 1" 2" 2-15/16" 3-15/16" 5-1/8" 1-1/16" 2" 2-15/16" 5-1/8" 6" 8" 10" 12" 14" 468-00390 3-1/16" 5-1/16" 6-1/16" 468-10015 HALTEC TRUCK VALVE EXTENSIONS • HE-370 SERIES: Lightweight Extensions have the short collar for use on tube-type valves or tubeless lightweight valves. Has a double seal feature to assure positive seal • HE-390 SERIES: Lightweight Extensions are the same as the HE-370 series except with a long collar • HE-380 SERIES: Standard Style Extensions screw on the standard valve stem (.305"32" cap thread) and make valve mouth accessible • Extensions & stabilizers available for Alcoa wheels 468-00370 254 468-00382 BLACK POLYMER VALVE EXTENSIONS HALTEC ALUMINUM EXTENSIONS • Extremely lightweight • Made from aluminum ASCOT NO. MFG. NO. 468-01390 468-01391 468-01392 468-01393 COLLAR TYPE HE-390A Long HE-391A Long Long HE-392A Long HE-393A EXTREMELY LIGHTWEIGHT • Light-weight truck extensions are made of a durable, tough plastic able to withstand the conditions tire valve extensions are exposed to • They are designed for use where vibration and weight is a concern for valve stem breakage EFF. LENGTH 2" 2-15/16" 5-1/8" 6" 468-01390 ASCOT NO. MFG. NO. 468-13500 468-13501 468-13510 468-13511 468-13520 468-13521 468-13530 468-13531 HE-350 HE-350D HE-351 HE-351D HE-352 HE-352D HE-353 HE-353D CAP VC-3 DS-1 VC-3 DS-1 VC-3 DS-1 VC-3 DS-1 EFF. LENGTH 2.04" 2.63" 3.82" 4.41" 5.21" 5.80" 5.94" 6.53" 468-13531 468-13530

255 VALVES & ACCESSORIES VALVE CAPS, CORES & EXTENSIONS AIR - FLEXX® FLEXIBLE VALVE EXTENTIONS • Entirely pressure free during operation • Unbreakable. No risk of damaged extension or air loss • Fitment without additional holder / clamp / stabilizer (up to air-flexx® length 215 mm) • Always accessible. Air pressure checks can always be performed, without removing hubcaps • Even load on all tires. Less tire wear • Lower fuel consumption ASCOT NO. MFG. NO. DESCRIPTION 468-00075 AF-0075-GE w/ Cap - 75mm - 2-Pack 468-00085 AF-0085-GE w/ Cap - 85mm - 2-Pack 468-00105 AF-0105-GE w/ Cap - 105mm - 2-Pack 468-00145 AF-0145-GE w/ Cap - 145mm - 2-Pack 468-00185 AF-0185-GE w/ Cap - 185mm - 2-Pack 468-00215 AF-0215-GE w/ Cap - 215mm - 2-Pack 468-00315 AF-0315-GE w/ Cap - 315mm - 2-Pack 468-00415 AF-0415-GE w/ Cap - 415mm - 2-Pack 468-01000 AF-1000-GE w/ Cap - 1000mm - 2-Pack LENGTH 2-15/16" 3-5/16" 4-1/8" 5-11/16" 7-1/4" 8-7/16" 12-3/8" 16-5/16" 39-3/8" Protective Cover Stainless Steel Jacket Inner Air Pipe Inner Pin Moving

VALVES & ACCESSORIES SPECIAL APPLICATION PRODUCTS HIGH-PRESSURE INFLATING CONNECTIONS • Connections attach securely by hand or wrench to the valve cap threads of high-pressure valves 468-00556 ASCOT NO. MFG. NO. DESCRIPTION 468-00556 H-556 486-06116 Fits .305"-32" Thread Size With 1/8" NPT Male Connection. Has Core Depressor Pin, Copper Sealing Washer. MAX. WORKING PRESSURE: 3000 PSI 468-06116 H-6116B Fits .305"-32" Thread Size With 1/8" NPT Female Connection With 70° Bend. Equipped With Hard Fiber Sealing Washer. MAX. WORKING PRESSURE: 3000 PSI CROSSFIRE DUAL™ TIRE PRESSURE EQUALIZATION SYSTEM HOW CROSSFIRE WORKS: Crossfire is a pressure equalizing and monitoring valve that is mounted between dual tires. It bolts easily to the lug, hub cap, or drive axle end. Properly mounted, air freely flows from one tire to the other, maintaining equal tire pressure and load distribution. • Maximizes tire life • Decreases rolling resistance for increased fuel mileage • Cuts maintenance time due to single-point inflation and the visual pressure gauge • Improves stability, braking and overall safety • Installs in minutes and requires little maintenance • Pays for itself in less than a year • American-made and guaranteed for two years HIGH-PRESSURE SHOCK/STRUT VALVES • Constructed of stainless steel bodies for use in high pressure shock absorber units, hydraulic pressure accumulator, surge cylinders and high pressure pneumatic systems • 1/2"-20 U.N.F. - 3A threads for connection to container 468-07607 468-04361 468-00798 ASCOT NO. MFG. NO. OPERATING PRESSURE 468-07607 468-04361 468-00798 H-7607 H-4361 H-798 2000 PSI 3000 PSI 5000 PSI CONFORMS TO AN-812-1 AN-6287-1 MS-28889-2 TANK VALVES • Use on pressure containers where gauging or service may be required • Used with various gases, fluids and operating pressures 468-00399 ASCOT NO. MFG. NO. 468-00399 468-00400 468-00401 468-00402 TV-399 TV-401 OAL 1-5/16" TV-400 1-5/16" 27/32" TV-402 1-5/16" 468-00400 468-00401 BASE THREAD CAP THREAD HEX SIZE 1/8" NPT 1/4" NPT 1/8" NPT 1/8" NPT .305"-32 .305"-32 .305"-32 .305"-32 7/16" 9/16" 7/16" 7/16" 468-00402 MFG. NO. CF-PSI-RH CF-PSI-HD CF-PSI-ST SS-PSI-RH SS-PSI-ST DESCRIPTION Crossfire Rubber Hoses Crossfire Heavy Duty Hoses Crossfire Stainless Steel Hoses Super Single Rubber Hoses Super Single Steel Hoses Crossfire valves are available for desired air pressures of 50 to 150 PSI in 5 PSI increments. Example: CF-100-ST = Crossfire valve, 100 PSI air pressure, stainless steel hose with AT & BH brackets. Proper-inflation Mounted correctly, Crossfire’s yellow indicator verifies that air is flowing freely from one tire to the other, equalizing the load Over-inflation 20% over-inflation can cause a minimum 10% loss of tire life expectancy 256 MADE IN THE USA Under-inflation 20% under-inflation can cause a minimum 30% loss of tire life expectancy

257 VALVES & ACCESSORIES AIR/LIQUID/ AGRICULTURAL VALVES RIM NUTS AND BUSHINGS 468-00010 AIR/LIQUID VALVES FOR TRACTOR AND ROAD GRADER SERVICE 464-00618 ASCOT NO. MFG NO. 464-00618* 464-01618 464-00718 464-00621 464-00622 464-00623 464-00619 464-02618 A TV-618A* TV-618B TV-618RB TV-621A TV-622A TV-623A TV-619A 1-7/8" 1-1/2" 1-7/8" 1-1/2" 1-3/4" 1-1/2" 1-7/8" TV-618A-SS 1-7/8" *TR618A Made in USA available from Dill 464-00015 TRACTOR AND GRADER TUBE VALVE • Valve assemblies with removable core housing for liquid fill • Vulc-on back to allow field repair ASCOT NO. MFG. NO. 464-00015 P-15 464-01025 464-00030 VULC-ON BACK CORE HOUSINGS 467-00218 CORE ASCOT NO. TR NO. BASE DIAM. 2-1/2" 467-00218 467-00220 467-00916 TR-218A TR-220A 2-1/2" 3-1/4" TR-916A AIR/LIQUID EXTENSION • Use with tractor or grader valve stems • 90° angle for more accessible valve 468-00201 464-05905 ASCOT NO. MFG. NO. 464-05905 DESCRIPTION TV-5905 Air/Liquid Extension 90 DEGREE ANGLE ASCOT NO. MFG. NO. 468-00201 468-00203 TV-CH-1 TV-CH-3 468-00216 TR-CH-16 468-00203 DESCRIPTION Fits Old Style TR-218, TR220 Valves Fits All Fast Flow Air-Liquid Valves Except Super Large Bore Fits SP816 Tube Spud and T-81, C-100 468-00216 HOUSING TV-CH-3 TV-CH-3 R-372 VERTICAL HEIGHT 1-7/8" 2-15/16" 1-7/8" VALVE HOLE .625" .625" .812" N-1012S T-30 464-01025 DESCRIPTION For Tube-Type Wheels. Used to Plug 5/8" Rim Hole and Avoid Tube Pouching Used to Seal 5/8" Rim Hole When Relocating Valve Used to Seal 13/16" Rim Hole When Relocating Valve 464-00030 B — — — 3" 4-1/2" 2-1/4" — BEND ANGLE — — — 65° 90° 65° — VALVE HOLE .625" .625" .625" Rubber .625" .625" .625" .812" .625" ASCOT NO. MFG. NO. DESCRIPTION 468-00202 468-00010 RN-02 LN-10 468-00009 468-00006 B-9A B-6 RIM HOLE PLUGS 468-00009 468-00006 Rim Hole Reducer Plastic Rim Nut. For Tractor Tube Valves TR-218A, TR-220A Bushing Assembly. Fits Over TR-218A, TR-220A Valves For Use In 13/16" Valve Hole. Includes B9 Bushing and LN-13 Nut Bushing. Fits Over TR-13 Tube Valve When Used in 5/8" Valve Hole

VALVES & ACCESSORIES LIQUID FILL TOOLS SPECIAL APPLICATION PRODUCTS 464-10912 464-01091 ASCOT NO. MFG. NO. 464-01091 N-1091 464-10912 464-10913 464-01451 464-01452 N-1091-2 N-1091-3 N-1451 N-1452 464-01452 DESCRIPTION Water Adapter For Liquid Fill Tires For Water Adapter For Water Adapter 1/2" FNPT Coupler for Fluid Use 1/2" MNPT Nipple for Fluid Use 464-01451 464-10913 VALVE ADAPTER GUN • 1/2" female pipe thread and attaches to any calcium tire filling pump • Extracts valve core from standard bore valve or core housing from tractor valve • Securely holds valve core or core housing up in the gun body during tire filling or evacuation of liquid from a tire 258 SECURE HOLD 3-IN-1 EXTRACTOR & INFLATOR TOOL • Use to remove valve cores, install valve cores, and inflate your tires with air. 1/4" threaded inlet • Cut the valve cap installation process in half. Customized with air-holding seals to speed airflow through the tire valve • Install air chuck onto tool, push knurled end inward, unscrew valve core. Pull knurled knob back, allowing core to be safely held inside of tool's air-tight chamber • 5-1/8“ length – 6-3/4” extended • Valve core remains inside the tool so no more lost valve cores 469-00443 EXTRACTS VALVE CORE 464-00310 ASCOT NO. MFG. NO. DESCRIPTION 469-00443 AS-443 3-In-1 Valve Extractor & Inflator Tool FAST-N-FLATOR CORE REMOVER • Made in USA • Patent Pending • Allows for removal of valve core and inflation of tire - all in one • Clear window in body takes guess work out of core removal and installation • Minimizes air loss compared to competition • USA-Made torque knob ensures proper reinstallation of valve core every time. ASCOT NO. MFG. NO. DESCRIPTION 464-00310 464-00134 464-00135 464-00136 464-00137 464-00138 464-00139 464-00140 464-00141 464-00142 464-00143 464-00144 464-00145 464-00146 310 FP-134 FP-135 FP-136 FP-137 FP-138 FP-139 Gasket FP-140 FP-141F FP-142 FP-143 FP-144 FP-145 FP-146 Stem Adapter Body Stem Sealing Nut O-Ring For FP-142 Hand Wheel Lock Nut Teflon Gasket 464-04501 AQUA QUICK FILL • To fill a tractor tire or off-theroad tire with liquid without supervision • Automatically vents excess pressure through side port while tire is filled • Indicates tire is filled by water escaping through vent hole ASCOT NO. MFG. NO. DESCRIPTION 464-04501 4501 Fast-N-Flator Core Remover ASCOT NO. MFG. NO. DESCRIPTION 464-10001 AQF-1 Aqua Quick Fill Ejector Union Valve Adapter Gun Large Bore Core Remover Adapter For Standard Valve O-Ring For FP-135 Adapter Standard Valve Core Remover VENTS EXCESS PRESSURE 464-10001

259 VALVES & ACCESSORIES LARGE BORE VALVES LARGE BORE SPUDS 465-00431 ASCOT NO. MFG. NO. 465-00431 K-431 465-00702 DESCRIPTION Clamp-In Type Spud. Grommet increases The Sealing Area. Can Be Removed and Replaced Without Dismounting The Tire. Do Not Use In Continuous Service. Temporary Use Only 465-00702 465-00710 H-41 C-10 TR-SP-2 Tubeless Spud. Fits 13/16" Rim Hole Used With All Large Bore Swivel Valves TR-C-10 Large Bore Screw-In Spud. Screws Into 1/2” NPT Tapped Hole In The Rim. Can Be Replaced Without Dismounting Tire 465-00710 SINGLE BEND SWIVEL VALVES • Any other lengths may be ordered • All valves equipped with core and hex cap • On lengths over 6", 2 lock nuts are furnished valves can be used with any of the spuds on this page ASCOT NO. MFG. NO. 465-01418 N-1418 DOUBLE AND TRIPLE BEND SWIVEL VALVES • These valve stems can be used with any of the spuds above • Any other lengths can be ordered • All valves equipped with core and hex cap • On lengths over 6", 2 lock nuts are furnished Double Bend Swivel Valve 465-00650 WH-300-J-650 465-00653 WH-300-J-653 465-00657 WH-300-J-657 465-30045 WH-300-4-1/2 465-00658 WH-300-J-658 465-03009 465-00446 465-40001 465-00454 465-40002 465-00455 465-40003 465-40004 465-00458 465-40005 465-04510 465-45105 465-04512 465-04513 465-04524 465-40006 WH-300-9 WH-44-6 WH-45-101/2 WH-45-12 WH-45-13 WH-45-24 WH-45-28 Triple Bend Swivel Valve ASCOT NO. 465-00661 465-70255 MFG. NO. WH-70-J661 WH-70-J661-10-1/2 WH-70-J661-28 WH-70-J664 TR NO. BEND ANGLE LENGTH HEIGHT DOUBLE BEND SWIVEL VALVES J-661 — 465-70285 WH-70-J661-25-1/2 465-70280 465-00664 465-70125 465-00667 465-71090 465-72212 465-72280 465-73212 WH-72-J-21-1/4 WH-72-J-28 WH-73-J-21-1/4 465-00662 465-75610 465-00663 465-00665 465-00666 WH-75-J662 WH-75-J662-10-1/2 WH-75-J663 WH-75-J665 WH-75-J666 — — WH-70-J664-12-1/2 WH-70-J667 WH-71-J-9 J-664 — J-667 — — — — 82°-8° 82°-8° 82°-8° 82°-8° 90°-13° 90°-13° 90°-11° 55°-35° 70°-20° 70°-20° 60°-30° TRIPLE BEND SWIVEL VALVES J-662 90°-20°-20°- J-663 90°-8°-8° J-665 90°-13°-13° J-666 4-1/2" 1-5/64" 10-1/2" 1-5/64" 25-1/2" 1-5/64" 28" 1-5/64" 1-5/64" 8-3/4" 12-1/2" 1-5/64" 7-1/2" 1-5/64" 9" 1-33/64" 21-1/4" 1-5/64" 28" 1-5/64" 21-1/4" 1-3/8" 14" 25" 32" 1-5/64" 90°-20°-20° 10-1/2" 1-5/64" 1-5/64" 1-5/64" 84°-6°-31°-31° 20-1/8" 1-5/64" WH-45-30 WH-45-32 WH-45-36 465-00650 TR NO. BEND ANGLE LENGTH HEIGHT 1-3/4" - J-650 J-653 J-657 - J-658 - - WH-45-2-1/2 J-4000-2-1/2 WH-45-4 - WH-45-4-1/2 J-4000-4-1/2 WH-45-5 WH-45-6 - J-4000-6 WH-45-7-1/2 J-4000-7-1/2 WH-45-8 WH-45-9 WH-45-10 - J-4000-9 - - - - - J-4000-28 465-40007 WH-45-29-1/2 J-4000-29-1/2 465-04530 465-04532 465-04536 465-00651 465-04645 465-00652 465-04745 465-00479 465-00655 - - - WH-46-J-651 WH-46-4-1/2 WH-47-J-652 WH-47-4-1/2 WH-47-9 WH-48-J-655 465-00654 WH-49-J-654 465-00659 WH-50-J-659 465-00660 WH-50-J-660 465-00506 465-00507 465-00668 465-00522 465-00535 465-00546 465-00552 465-00558 465-00563 465-00573 465-00582 WH-50-6 WH-50-7-1/2 WH-51-J-668 WH-52-2 WH-53-5-1/2 WH-54-6 WH-55-2-1/2 WH-55-8-1/2 WH-56-3 WH-57-3 WH-58-2-1/2 465-00656 WH-59-J-656 J-651 - J-652 - - J-655 J-654 J-659 J-660 - - J-668 - - - - - - - - J-656 74˚ 80° 80° 80° 80° 80° 80° Strt. 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 86° 86° 86° 74° 60° 90° 90° 90° 90° 90° 25° 80° 90° 90° 90° 65° 80° 60° 90° 4" 1-5/64" 3-1/8" 1-5/64" 2-1/2" 1-5/64" 1-5/64" 4-1/2" 1-5/64" 5-1/2" 1-5/64" 1-5/64" 1-5/64" 9" 6" 2-1/2" 1-5/64" 1-5/64" 4" 4-1/2" 1-5/64" 1-5/64" 1-5/64" 5" 6" 7-1/2" 1-5/64" 1-5/64" 1-5/64" 1-5/64" 8" 9" 10" 10-1/2" 1-5/64" 1-5/64" 1-5/64" 1-5/64" 1-5/64" 12" 13" 24" 28" 29-1/2" 1-5/64" 1-5/64" 1-5/64" 1-5/64" 30" 32" 36" 4-11/16" 1-17/64" 4-1/2" 1-17/64" 5-1/2" 1-5/64" 4-1/2" 1-5/64" 1-5/64" 9" 3-1/8" 1-5/64" 3-1/8" 1-5/64" 3-1/2" 1-57/64" 8-3/4" 6" 1-57/64" 1-57/64" 7-1/2" 1-57/64 4-11/16" 5-1/8" 1-5/64" 2" 5-1/2" 1-21/64" 2-25/64" 2-25/64" 2-25/64" 1-5/64" 1-5/64" 6" 2-1/2" 8-1/2" 3" 3" 2-1/2" 2-1/8" 3-11/16" 2-5/8"

VALVES & ACCESSORIES VALVE ADAPTERS ASCOT NO. MFG. NO. 468-00100 468-08007 AD-1 8807N-4 LARGE BORE VALVES 468-00100 DESCRIPTION Adapts Large Bore Valve Down To Standard Valve Bore. Fits. 305-32" Valve Core Threads Adapts Large Bore Valve Down To Standard Valve Bore. Fits .485-26" Valve Cap Threads SPECIAL HYDROFLATING VALVES LARGE BORE CAPS AND CORES • For faster filling of tires with liquid • Does not contain valve core • Straight-through 5/16" opening sealed with special O-ring cap, No. A-151 • Used on loader tire in conjunction with similar large bore air valve AIR WATER VALVES 465-00145 ASCOT NO. MFG. NO. 465-00145 465-00144 465-00148 465-00149 468-00151 A-145 A-144 A-148 A-149 A-151 468-00149 ASC-149 465-00148 DESCRIPTION Large Bore Core (Short). Fits 305-32" Threads Large Bore Core (Long). Fits .305-32" Threads Screwdriver Valve Cap. Fits .482-26" Threads Hex Valve Cap. Fits .482-26" Threads Air-Water Valve Cap (TR-FC-1). O-Ring Sealing Cap. Used With 465-00994, 465-97755, 465-97711 Large Bore Hex Valve Cap - 10 Per Bag TURRET VALVE FOR PLANETARY GEAR WHEELS LARGE BORE SWIVEL VALVES • Made in USA • Full OTR Line Available 465-00690 465-65502 ASCOT NO. MFG. NO. 465-65202 465-65402 465-65502 465-65602 465-65702 465-65802 465-65902 DESCRIPTION J-650USA J-654USA J-655-USA J-656-USA J-657-USA J-658-USA J-659-USA 4.05" Large Bore Swivel Valve 3.50" Large Bore Swivel Valve 3.82" Large Bore Swivel Valve Large Bore Swivel Valve 4.75" Large Bore Swivel Valve 6.25" Large Bore Swivel Valve Large Bore Swivel Valve LARGE RADIUS, HIGH-BEND AIR/LIQUID VALVE • Uses super large bore T-81 spud (TR-SP-8) • Uses A-151 cap 465-97755 ASCOT NO. 465-97755 465-97711 MFG. NO. 977S-5-1/2 977S-11 BEND 90° 90° LENGTH 5-1/2" (139.7mm) 11" (279.4mm) 2" (50.8mm) HEIGHT 2" (50.8mm) ASCOT NO. MFG. NO. 465-11455 465-11411 114S-11 114S-5-1/2 90° 90° 5-1/2" (139.7mm) 11" (279.4mm) 2" (50.8mm) ASCOT NO. 465-00690 465-00691 465-06911 465-00692 465-00693 465-00694 465-00695 465-00696 465-00691 MFG. NO. TR NO. ANGLE BEND WH-330-J-690 J-690 2 Bends WH-330-J-691 J-691 WH-330-J-691B J-691 WH-330-J-692 J-692 18° 18° 28° WH-330-J-693 J-693 60° WH-330-J-694 J-694 28° WH-330-J-695 J-695 WH-330-J-696 J-696 50° 42° LARGE RADIUS, HIGH-BEND AIR-VALVE USED WITH 977S • All valves fit 13/16" valve hole • INCLUDES: A-145 valve core and A-149 cap 465-11455 2" (50.8mm) OFFSET INCHES LENGTH 9/16" - - 9/16" 1" - 1" 29/32" 4-11/16" 3-5/16" 8-1/2" 4-11/16" 5" 3-1/2" 4-1/8" 4-1/4" ASCOT NO. 465-00994 MFG. NO. TR NO. WH-JF-994 JF-994 465-00149 465-00151 • Used in conjunction with WH-330-J-694 large bore valve 465-00994 ANGLE BEND 28° HORIZONTAL LENGTH 3.5" (88.9mm) CAP A-151 468-08007 260

261 VALVES & ACCESSORIES LARGE BORE VALVES MISCELLANEOUS VALVES STANDARD O-RINGS FOR TUBELESS RIMS • Made of high quality polysoprene rubber • Packaged 2 per poly bag, 24 O-rings per case • Manufactured to major OEM specifications • Arctic style O-ring available (Marked with green ink) 465-00670 465-06702 465-00671 465-00702 465-06703 ASCOT NO. MFG. NO. 465-00670 T-670 465-00671 465-00702 465-06702 465-06703 H-47 H-41 H-42 H-45 TR NUMBER DESCRIPTION — TR-J-671 SP-2 TR-J670-2 TR-J670-3 Loader Tire Valve. Complete With Core, Hex Cap & O-Ring Seal. Thread Size: 1-1/16-12. Height: 1-25/32" Tank Valve. Screw-In Type With 1/4" Male Pipe Thread. Complete With Core and Cap. 1-19/32" Length Tubeless Spud. Used With All Large Bore Swivel Valves. Fits 13/16" Rim Hole Straight Valve. Equipped With Core and Hex Cap. Height Is 1-1/2" Spud and Valve Complete. Consists Of H-41 & H-42. Height Is 1-5/8" HOOK AND PICK SET • Comfortable material handle • 4 picks: combination pick 90° pick, straight pick, and hook pick • Help removal of o-ring, cotter pin seals, and bushes in various automotive applications ASCOT NO. 471-80001 471-80002 471-80003 471-80004 471-80005 471-80006 471-80009 471-80011 471-80014 471-80015 471-80016 471-80019 471-80020 471-80021 471-80022 471-80023 471-80024 471-80025 471-80215 471-80225 471-80449 471-80451 471-80457 471-80463 471-80469 MFG. NO. OR-20-JM OR-22-JM OR-24-JM OR-21-T OR-217-L OR-220-TG OR-321-T OR-329-T OR-335-T OR-339-T OR-343-T OR-351-T OR-357-T OR-451-T OR-457-T OR-463T OR-232-T OR-239-T OR-215-H OR-225-T OR-449-T OR-451-OVM OR-457-OVM OR-463-OVM OR-469T ROD DIAM. 0.26" 0.26" 0.26" 0.26" 0.28" 0.26" 0.385" 0.385" 0.385" 0.385" 0.385" 0.385" 0.385" 0.50" 0.50" 0.50" 0.26" 0.26" 0.28" 0.26" 0.50" 0.50" 0.50" 0.50" 0.50" L-RINGS FOR EARTHMOVERS • Creates an air seal where the tire bead and rim seat are not completely compatible • Not a cure for damaged beads nor damaged wheels and rims! • CAUTION: Should be used during fitments, do not install where a broken bead is suspected SIZE Hwy (JM Rim) 20" Hwy (JM Rim) 22" Hwy (JM Rim) 24" Hwy 21" Grader 17" Grader 20" EM 21" EM 29" EM 35" EM 39" EM 43" EM 51" EM 57" EM 51" EM 57" EM 63" EM 32" EM 39" Grader 15" Grader 25" EM 49" OVM 51" Titan OVM 57" OVM 63" EM 69" 319-46464 ASCOT NO. MFG. NO. 319-46464 AS-MHPS DESCRIPTION Hook And Pick Set ASCOT NO. MFG. NO. 471-80112 471-80115 471-80116 471-80120 471-80125 471-80129 471-80133 471-80135 471-80139 471-80145 471-80149 471-80151 471-80157 471-80163 471-80169 LR-12 LR-15 LR-16 LR-20 LR-25 LR-29 LR-33 LR-35 LR-39 LR-45 LR-49 LR-51 LR-57 LR-63 LR-69 SIZE 12" 15" 16" 20" 25" 29" 33" 35" 39" 45" 49" 51" 57" 63" 69"

VALVES & ACCESSORIES SCREW-IN RIM SPUDS • Used to attach any of the super large bore valves to the rim and is designed to screw into a 1/2" NPT tapped rim hole • Can be changed without dismounting the tire ASCOT NO. MFG. NO. 464-00209 C-100 DESCRIPTION 464-00209 Effective Length 1/4" Longer LARGE BORE VALVES LARGE BORE SCREW-ON REPAIR VALVES FOR INNER TUBES SCREW-IN RIM SPUDS • 85° bend angle ASCOT NO. MFG. NO. 466-00850 466-00851 S-85 S-85-D DESCRIPTION 466-00850 Fits 1/2" NPT Tapped Rim Hole Furnished With A Locking Nut With A Teflon Seal So Direction Can Be Reversed CORE HOUSING • Complete with core and cap • Designated at Tire and Rim as the CH-8 • Integral part of the system as the CH-8 is removed from the valve assembly with the IN-80A adapter to utilize the larger opening and the fullest flow of the 6185 check valve ASCOT NO. MFG. NO. TR NO. 466-00918 R-520 TR-CH-8 DESCRIPTION Core Housing SUPER LARGE BORE INFLATOR ADAPTER • New, safer alternative to IN-80A • Left hand threads on union body — will not come loose when screwing on to valve • New non-removable stem guide • 3/4" pipe thread for easy air hose connection • During inflation, air pressure in the tire can be checked through the stem knob with a tire pressure gauge • Will insert or extract CH-8 or CH-9 core housing • Pressure can be checked without disconnecting with a Large Bore Gauge • 1-piece stainless steel stem and collet • Reduces inflation time 60%, deflation time 80% • The core housing is held in a stainless steel extractor by a snap ring • Extractor is rugged enough so that the core housing c be loosened or tightened without being damaged 466-00851 • Supplied in straight or bent form ready for installation on tubes • Equipped with A-146 valve coer and A-149 hex cap • Used with SP-1000 tube spud 465-10781 262 466-00918 ASCOT NO. MFG. NO. TR NUMBER 465-01014 465-10760 465-10761 465-10762 465-10763 465-10764 465-11750 465-11751 465-11752 465-10780 465-10781 465-10782 465-11790 465-11791 465-11792 LB-216 LB-217 LB-218 LB-219 J-1014 LB-220 J-1076D LB-221 J-1076E J-1078B LB-228 J-1078C J-1179C LB-229 J-1179A Straight LB-230 J-1179B LB-231 88° 86° 6-13/32" 1-3/8" 1-1/8" 5-1/4" 5-1/2" A-ANGLE BEND Straight J-1076A Straight J-1076B J-1076C 86° 90° 90° 88° LB-223 J-1175A Straight LB-224 J-1175B LB-225 J-1175C 82° 88° LB-226 J-1078A Straight LB-227 82° 90° B-VERTICAL HEIGHT 1-29/32" 4-5/32" 1-1/8" 1-1/2" 2-1/16" 1-3/8" 5-9/32" 1-1/4" 1-3/8" 5-25/32" 1-3/8" 1-1/8" C-HORIZONTAL LENGTH - - 3-1/4" 2-7/8" 2-5/16" 3" - 4-1/4" 4-1/8" - 4-5/8" 4-7/8" - LARGE BORE SCREW-ON REPAIR VALVE ADAPTERS FOR INNER TUBES 465-40000 ASCOT NO. MFG. NO. 465-40000 H-4000 466-05311 465-40011 DESCRIPTION Adapter Converts Tubes having SP-1000 Type Spud To Accept Large Bore Swivel Valves. Equipped With BW-18 Washer and Used With Rim Slots H-4000-1 Same As H-4000 Except Without Bridge Washer and Hex Nut CLAMP-IN RIM SPUD PARTS INCLUDEDIN-100A PARTS LISTPARTS INCLUDED E-3100-2A Connector Sleeve IN-100-1A Body for IN-100 IN-100-3A Nut for Connector Sleeve 10218 O-Ring G-202 Teflon Washer ASCOT NO. MFG. NO. 466-05311 IN-100A DESCRIPTION Super Large Bore Inflator Adapter E-3100-12 Hand Knob E-3100-1A Stem and Collet 464 Lock nut A-147 • Fits 13/16" diameter valve hole • Can attach to any super large bore valve to the rim through a standard valve hole (13/16" diameter) 464-00208 ASCOT NO. MFG. NO. TR NUMBER 464-00208 464-00082 T-81 T-82 TR-SP8 — DESCRIPTION Clamp-In Rim Spud T-82 Clamp-In Rim Spud - 1/4" longer effective length

263 VALVES & ACCESSORIES LARGE BORE VALVES FLEXIBLE EXTENSION SERIES • Flexible extensions are made up in any length to allow the extension to fit the wheel configuration • Specially designed fittings and thermoplastic hose will not fatigue or crush during service • Corrosion problems are eliminated • Able to customize your extension in the field • The R-969-K and R-969K-1 kits are available to field assemble your own flexible extensions with the T-620 assembly tool (not shown) ASCOT NO. MFG. NO. 466-03000 DESCRIPTION MT-3000 Flexible Extension ASSEMBLY KIT FOR SUPER LARGE BORE VALVES-FIELD SERVICE 466-96901 ASCOT NO. MFG. NO. 466-96901 466-96900 466-76000 DESCRIPTION R-969K-1 R-969-K R-760 Consists Of R-762S Swivel Connector, R-763 Straight Tubing Connector, R-764R (2) Tubing Connector Sleeves and B-222 Nuts (2) Consists Of The Above Plus The R-520 Core Housing Complete With Core and Cap Extension Tubing Available In 50' and 100' Lengths RIGID METAL SWIVEL VALVES 466-00200 466-00800 SWIVEL ANGLE CONNECTORS • Component two of the super large bore system is generally a swivel connector that screws onto the spud • Connectors of various angles and lengths are available • Other end of the connector accommodates a MT-3000 flexible extension which attaches to the R-520 core housing of the 6185 check valve 466-00890 ASCOT NO. MFG. NO. 466-00525 466-00685 466-00625 466-00675 466-00660 466-00529 R-525 R-685 R-625 R-675 R-660 R-529-5-1/4 466-01850 LARGE BORE TURRET VALVES Custom Valve 466-00690 ASCOT NO. MFG. NO. 466-00200 M-2000 466-00800 MR-800 466-00890 466-01850 MR-890 MR-850 DESCRIPTION Swivel Valve Assembly. 90° Swivel Valve - 3-1/8” Horizontal Length Swivel Valve: MR-800-Length. Rigid Metal Swivel Valve With R-520 Core Housing And 2B-222 Lock Nuts Turret Valve: MR-890. Rigid Metal Turret Type Valve With R-520 Core Housing & (3)B-222 Lock Nuts Swivel Valve: MR-850. Same As MR800 Except With A T-81 Rim Spud ASCOT NO. MFG. NO. 466-00690 466-00691 466-00692 466-00693 DESCRIPTION J-690-USA 5.60" Large Bore Turret Valve J-691-USA 4.50" Large Bore Turret Valve J-692-USA 5.68" Large Bore Turret Valve J-693-USA 6" Large Bore Turret Valve BEND ANGLE 90° 85° 80° 75° 60° 90° • Designed specifically for use with 6185 check valve • Sliding sleeve locks air chuck onto check valve and permits unrestricted air flow • Gauging can be done through valve on chuck • Positive air line shut off-valve must be installed in back of air chuck ASCOT NO. MFG. NO. DESCRIPTION 466-06190 6190 466-06190 CHECK VALVE • Complete with cap • Permits rapid inflation and deflation • Eliminates need for core housing and inflation adapter • Used with 6190 air chuck 466-03000 ASCOT NO. MFG. NO. TR NO. 466-00860 6185 DESCRIPTION TR-L-860 Check Valve QUICK CONNECTION INFLATION CHUCK 466-00860 Quick Connection Inflation Chuck 466-00525 466-00675

VALVES & ACCESSORIES LARGE BORE VALVES SUPER LARGE BORE VALVES 466-00296 SUPER LARGE BORE VALVES 466-04000 466-01066 466-01870 466-07910 ASCOT NO. MFG. NO. 466-00296 DS-296 DESCRIPTION Super Large Bore Double Spud Valve Assembly (with Flexible Extension). Designed For Use Where Above Rim Is 7/8". Consists Of DS-210 Double Spud, DS-215 Plug And MT-4000 Flexible Extension 466-04000 MT-4000 Flexible Extension. Used With DS-296 And PB-210. Consists Of: DS-226 Connector, R-763 Connector, (2) R-764R Sleeves, R-760 Tubing. Length can be customized 466-07910 466-08860 S-7910 S-8860 Valve Support For Super Large Bore Valve Support For Large Bore ASCOT NO. MFG. NO. 466-01066 N-1066 DESCRIPTION Super Large Bore Loader Valve. Accepts R-520 Core Housing Or Other Super Large Bore Swivel Fittings. Thread Size is 1-1/16"12. Super Large Bore Version Of T-670 466-05000 M-5000 Straight Valve Assembly. Screw-In Type Spud With O-Ring Seal. R-521 Core Housings Not Interchangeable In Other SLB Spuds. Thread Size Is 3/4-16" 466-01870 466-01050 M-1870 N-1050 Straight Valve Assembly. Super Large Bore Straight Valve Assembly Consists of R-520 Core Housing And T-81 Spud Same as M-1870 but with T-82 Spud 264 SUPER LARGE BORE AIR/LIQUID VALVES FOR TRACTOR AND GRADER SUPER LARGE BORE TURRET VALVES • Long super large bore turret valve with 15° bend • Used on Caterpillar applications SUPER LARGE BORE TURRET 466-01538 464-00216 466-01543 ASCOT NO. MFG. NO. 466-01533 JD-3 466-01538 466-01543 N-1538B N-1543A DESCRIPTION 6-1/8" Long Super Large Bore Turret - 12° Bend Angle 7-7/8" Long Super Large Bore Turret 6-1/8" Long Super Large Bore Turret ASCOT NO. MFG. NO. 464-00208 464-00216 466-50910 T-81 R-372 H-50 DESCRIPTION Fits 13/16” Dia. Rim Holes Fits T-81, C-100, TRSP 816 Tube Spuds Components T-81 Spud And R-372 Core Housing 464-00208 466-50910

265 VALVES & ACCESSORIES LARGE BORE EXTENSIONS RIGID BRASS LARGE BORE EXTENSIONS • All-brass extensions used when mounted in straight line with valve • Full length deflector pin opens core in valve when servicing • Equipped with hex cap, 2 lock nuts on extensions over 5" in length ASCOT NO. 465-86032 465-86015 465-86020 465-86025 465-86030 465-86033 465-86040 465-86045 465-86050 465-86059 465-86060 465-86067 465-86072 465-86077 465-86080 465-86085 465-86090 465-86100 465-86107 465-86120 465-86125 465-86160 465-86187 465-86225 465-86245 MFG. NO. 867- 1-1/4 867- 1-1/2 867- 2 867- 2-1/2 867- 3 867- 3-3/8 867- 4 867- 4-1/2 867- 5 867- 5-9/16 867- 6 867- 6-7/8 867- 7-1/4 867- 7-3/4 867-8 867- 8-1/2 867-9 867-10 867- 10-3/4 867-12 867- 12-1/2 867- 16 867- 18-7/8 867- 22-1/2 867- 24-1/2 EFFECTIVE LENGTH 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-3/8" 4" 4-1/2" 5" 5-9/16" 6" 6-7/8" 7-1/4" 7-3/4" 8" 8-1/2" 9" 10" 10-3/4" 12" 12-1/2" 16" 18-7/8" 22-1/2" 24-1/2" CUSTOM BENT SWIVEL VALVES AND EXTENSIONS ASCOT NO. MFG. NO. OVERALL LENGTH 465-00570 WHG-0570VC 19-31/32" 465-00585 WHD-0585EC 17-15/16" 465-01450 WHG-1450VC 32-7/8" 465-04985 WHG-4985VC 19-3/4" 465-05008 WHD-5008EC 17-13/16" 465-05112 WHG-5112VC 28-3/8" 465-05200 WHG-5200VC 27" 465-05410 WHG-5410VC 31-9/16" 465-05420 WHG-5420VC 33" 465-05922 WHD-5922EC 15-1/4" 465-07103 WHD-7103EC 16-1/4" 465-07601 WHD-7601EC 16-3/4" 465-07602 WHD-7602EC 14-1/4" 465-07940 WHD-7940EC 19" 465-07948 WHD-7948EC 20-5/8" 465-07949 WHD-7949EC 28-7/8" 465-08018 WHG-8018VC 26-3/4" 465-08019 WHG-8019VC 8" 465-08852 WHG-8852VC 18-9/16" 465-09440 WHG-9440VC 27" 465-09470 WHG-9470VC 31-1/2" 465-09903 WHD-9903EC 16-7/8" NO. OF BENDS TYPE 5 4 5 4 4 4 5 5 5 5 4 4 4 5 4 4 4 1 4 5 5 4 Valve Extension Valve Valve Extension Valve Valve Valve Valve Extension Extension Extension Extension Extension Extension Extension Valve Valve Valve Valve Valve Extension FLEXIBLE LARGE BORE EXTENSIONS • Made with tough rubber hose and reusable hydraulic type fittings • Equipped with 2 lock nuts and 3/4" hex sealing nut • A Teflon gasket seals on end of valve • The lead seal in the sealing nut is forced into the threads for a second seal, positively locking extension to valve ASCOT NO. 465-81080 465-81090 465-81100 465-81200 465-81250 465-81320 465-81400 MFG. NO. 810F-8 810F-9 810F-10 810F-20-1/2" 810F-25 810F-32 810F-40 EFFECTIVE LENGTH 8" 9" 10" 20-1/2" 25" 32" 40" 465-86060 ASCOT NO. 465-75035 465-75040 465-75045 465-75080 465-75090 465-75010 465-75115 465-75120 465-75135 465-75160 465-75170 465-75175 465-75180 465-75185 465-75190 465-75205 465-75210 465-75215 465-75225 465-75235 465-75245 465-75250 465-75295 465-75320 MFG. NO. 753S-3-1/2 753S-4 753S-4-1/2 753S-8 753S-9 753S-10 753S-11-1/2 753S-12 753S-13-1/2 753S-16 753S-17 753S-17-1/2 753S-18 753S-18-1/2 753S-19 753S-20-1/2 753S-21 753S-21-1/2 753S-22-1/2 753S-23-1/2 753S-24-1/2 753S-25 753S-29-1/2 753S-32 EFFECTIVE LENGTH 3-1/2" 4" 4-1/2" 8" 9" 10" 11-1/2" 12" 13-1/2" 16" 17" 17-1/2" 18" 18-1/2" 19" 20-1/2" 21" 21-1/2" 22-1/2" 23-1/2" 24-1/2" 25" 29-1/2" 32" 465-75035 HAND BENDABLE LARGE BORE EXTENSIONS • Equipped with 2 lock nuts and 3/4" hex sealing nut • Teflon gasket seals on end of valve; the lead seal in the sealing nut is forced into the threads for a second seal, locking extension to valve • Cap and core not included • Should be removed from valve and transferred to extension 465-81090

VALVES & ACCESSORIES Z-BORE VALVE SYSTEM There are three spud types available: the standard clamp-in spud, a screw-in spud and an angle screw-in spud. There is no temporary outside-in clamp-in spud for Z-Bore. The Z-Bore Valve System is very similar to the Super Large Bore System. By using an O-Ring to seal the clamp-in spud to the rim, a greater flow diameter is created without sacrificing strength or performance. Flows 370 CFM compared to 240 CFM on the Z-Bore Valve System. Z-1 SCREW-IN SPUD • The screw-in spud is used to attach any Z-Bore valves to the rim • Designed to screw into a 1/2" NPT-tapped rim hole • Can be changed without demounting the tire ASCOT NO. MFG. NO. DESCRIPTION 466-70001 Z-1 466-70001 Screw-In Spud Z-13 SCREW-IN SPUD • The Z-13 screw-In spud screws into the 3/4" NPT-tapped rim hole and converts Mega Bore to Z-Bore ASCOT NO. MFG. NO. 466-70013 Z-13 DESCRIPTION Screw-In Spud 466-70013 ANGLE CONNECTOR • Connectors of various angles and lengths are available • The connector accommodates a flexible extension which attaches to the Z-10 core housing ASCOT NO. MFG. NO. DESCRIPTION 469-70360 466-70375 466-70380 466-70390 Z3-60 Z3-75 Z3-80 Z3-90 60° Angle 75˚ Angle 80˚ Angle 90˚ Angle 466-70390 Z-BORE FLEXIBLE EXTENSIONS • Made up in any length to allow extension to fit the wheel configuration • Specially designed fittings and thermoplastic hose will not fatigue or crush during service • Corrosion problems are eliminated • Able to customize extension in the field • ZFAK field assembly kit available to assemble your own ASCOT NO. MFG. NO. 466-70700 ZBFELength 466-70701 ZFAK DESCRIPTION Flexible Extension Assembly Kit For Z-Bore Valves. INCLUDES: Contains Z-8 Swivel Connector, Z-7 Straight Tubing Connector, 2x Z2-2 Nuts, 2x Z-9 Tubing Connector Sleeves, Z-10 Core Housing. Z-100 Tubing Is Ordered Separately Z-10 CORE HOUSING • Complete with core and cap • Integral part of the system as the Z-10 is removed from the valve assembly with the Haltec Z-12B inflator to utilize the larger opening and the fullest flow ASCOT NO. MFG. NO. DESCRIPTION 466-70010 Z-10 Z-12L INFLATOR • To maximize air flow, a Z-12B inflator is used to remove core housing during inflation and deflation • Operates like the IN-100A Super Large Bore inflator Core Housing w/Core & Cap 466-70010 ASCOT NO. MFG. NO. 466-70012 Z-12L DESCRIPTION Inflator 466-70012 Z-4 ANGLE SCREW-IN SPUD • Fits 1/2" NPT-tapped rim hole • 85˚ bend angle ASCOT NO. MFG. NO. DESCRIPTION 466-70004 Z-4 Z-2 CLAMP-IN SPUD • Can attach any Z-Bore valve to the rim through a standard valve hole (13/16") • Fits a 13/16" diameter valve hole • Tire must be dismounted to change spud ASCOT NO. MFG. NO. 466-70002 Z-2 DESCRIPTION Clamp-In Spud 466-70002 266 Angle Screw-In Spud 466-70004

267 VALVES & ACCESSORIES PT VALVE SYSTEM PT VALVES • Designed with trouble-free, urethane O-rings on the valve barrel • Other valves and sizes available • Assemble the valve to the tire and wheel assembly before installing the PT gauge to the PT valve ASCOT NO. MFG. NO. 465-00042 465-00456 465-00520 465-00524 465-07536 465-30060 465-33031 465-33069 PT-EX PT-753S-6 DESCRIPTION PT-H-42 PT-45-6 PT-R-520 H-42 With PT Grooves & O-Rings WH-45-6 With PT Grooves & O-Rings R-520 With PT Grooves & O-Rings For Super Large Bore Large Bore Extension w/1-5/8” Effective length to allow PT Gauge installation on existing valves 753S-6 With PT Grooves & O-Rings PT-300-J-650 WH-300-J-650 With PT Grooves & O-Rings PT-330-3-1/2 PT-330-J-690 WH-330-J-690 With PT Grooves & O-Rings PT GAUGES LARGE BORE HD VALVE TOOLS • Easy-to-read dial gauge attaches to the valve • Includes gauge and nut • Calibrated 0-160 PSI • Has an all-anodized aluminum body and is totally sealed to prevent moisture from fogging the glow-in-the-dark dial ASCOT NO. MFG. NO. 468-00101 DESCRIPTION PT Gauge Liquid filled gauge for Large, Super and Z-bore applications PTC BLOCK-OFF COLLAR • For PT valves when gauge is not attached • Can be installed to prevent air leakage ASCOT NO. MFG. NO. 468-00580 PTC DESCRIPTION 5/8" Hex VALVE CAP • Valve cap used on PT-style valves • 5/8" hex ASCOT NO. MFG. NO. 468-00150 A-150 DESCRIPTION Valve Cap 468-00150 469-01610 469-01710 N-1610 N-1710 468-00101 ASCOT NO. MFG. NO. DESCRIPTION 469-00631 TL-631 Super Large Bore Rethreading Tool. Used To Rethread 11/16-24" Thread On Any Super Large Bore Valve 469-00680 TL-680 Three-Way Large Bore Tool. For Removing Large Bore Cores, Hex Caps And Screwdriver Caps Large Bore Core Tool Large Bore Core Tool. Valve Core Screwdriver Tool. Sliding Sleeve Allows Positive Grip On Valve Core For Hard To Reach Valves 468-00580 469-01810 N-1810 Large Bore Hex Cap Remover. Plastic Handle For Positive Grip. 10” OAL 469-01910 N-1910 Large Bore Core Remover. Plastic Handle For Positive Grip. 5 - 6" OAL 469-06900 TL-690 Four-Way Large Bore Core Tool. Thread Repair For Core And Cap Threads And Core Remover For Large Bore And Super Large Bore 469-06950 469-00690 469-00010 469-00680 469-06950 469-08909 TL-695 Four-Way Tool. Repairs Internal And External Threads On Air/Liquid Spuds. Also Large Bore Valve Core Insertion Tool 8909-C Large Bore Valve Fishing Tool 469-01910 469-01610 Turret Style Valve With 3-1/2” Effective Length PT VALVE TOOL • Tightens nut to hold PT gauge on valve assembly • Also tightens A-150 cap and PTC collar 468-00634 ASCOT NO. MFG. NO. 468-00634 TL-634 DESCRIPTION PT Valve Tool 465-00456 465-00520 ASCOT NO. MFG. NO. 469-00619 465-33031 DESCRIPTION VT-01C-LB Large Bore Valve Fishing Tool - Chain Type LARGE BORE VALVE FISHING TOOL - CHAIN TYPE

VALVES & ACCESSORIES VALVE HARDWARE TOOLS 268 469-00014 469-00040 469-00992 VALVE INSERTION AND REMOVAL TOOLS ASCOT NO. MFG. NO. DESCRIPTION 469-00014 469-00040 469-00992 469-01124 469-03333 469-05410 469-00850 VT-014 00040R 992 VT-1124 VT-03P 5410 Valve Installation Tool with Rubber Block Valve Stem Puller with Rubber Boot Tubeless Tire And Tire Valve Inserting And Removing Tool. For All Sizes Of Snap-In Passenger Car Tire Valves Tubeless Tire Valve Service Tool. Pull-A-Stem Tool Pulls Old Valves Or Inserts New Valves. Tool Fits All Sizes Or Lengths Plastic Valve Puller with Metal Rod Insert Snap-In Valve Puller - Dill NS-79435L Tire Valve Installer • Ergonomic Handle • Robust Design • Durable Steel Construction • Pivoting Head • Threaded Head 469-01124 469-03333 469-05410 469-00850 469-11610 469-11710 469-11810 9-11910 wheel during demount. One handle end can be used as a deflator, the other as a core remover. 3" OAL 469-08909

269 VALVES & ACCESSORIES VALVE HARDWARE TOOLS MADE IN THE USA 469-00123 469-00612 STANDARD BORE VALVE TOOLS ASCOT NO. 469-00612 469-00625 469-00630 469-00632 469-00633 469-00610 MFG. NO. DESCRIPTION TL-612 TL-625 TL-630 TL-632 TL-633 Standard Bore Core Tool. With An Overall Length Of 8" And Oversized Handle Standard Bore Core Tool. With Recessed Probe. Fits In Pocket Hex Nut Driver. For 500 Series Truck. For Tubeless Clamp-In Metal Valves. For All Lengths of Tubeless Truck Valves Truck Extension Service Tool. Tightens Both Metric European And Domestic Type Extensions. Broached To Engage The Metric Hex At The Extension Top and Will Reach The Hex On A 7" U.S.A. Type Extension Valve Cap Tool. Easy To Remove And Install Valve. Caps On Inside Dual Wheels. For Aluminum Wheels CT6-10 STANDARD BORE VALVE CORE TOOL Has a plastic screwdriver handle for better grip and leverage. 10 Pack 469-00123 AS-123 STANDARD BORE VALVE CAP INSTALLATION/REMOVAL TOOL Easy to remove and install valve caps on inside dual wheels. Designed for aluminum wheels with small hand holes, comes with a protective sleeve. Keeps cap in tool. Length 8.25" without handle SUR-LOCK VALVE TOOLS • Special design allows the valve core to stay attached to the tool after it is removed from the valve • Great tool to keep the valve core from getting dropped or lost 469-00132 469-00133 469-00632 469-00625 469-00633 469-01440 469-00610 (10 Pack) ASCOT NO. MFG. NO. DESCRIPTION 469-00131 469-00132 469-00133 469-00134 TL-131 TL-132 TL-133 TL-134 For Bicycles For Cars. 1-3/4" Length For Trucks. 8-1/4" Length For Large Bore Cores. 10-1/2" Length 469-00134

VALVES & ACCESSORIES VALVE HARDWARE TOOLS MADE IN THE USA 270 469-00024 469-00001 469-00005 469-00607 469-01638 469-00021 469-23430 469-00004 469-00012 469-00081 VALVE CORE INSERTION AND REMOVAL TOOLS ASCOT NO. 469-00001 469-00003 469-00005 469-00607 469-01638 469-15407 469-00024 469-00002 469-00012 469-00004 469-23430 469-00011 469-00021 469-00081 469-00567 MFG. NO. DESCRIPTION CT-1 CT-3 CT-5 607 1638A 15407 VT-0124 CT-2 CT-2E CT-4 VG8 VT-11 VT-21 TVT-81 567A Pocket-Size Valve Core Remover Heavy Duty Standard Valve Core Remover For Both Standard and Large Bore Valves Has Plastic Screwdriver Handle For Better Grip And Leverage Heavy Duty Professional Plastic Valve Puller. Steel Tube Reinforced Handle Provides Extreme Rigidity. Safety Orange Color For Easy Visibility. Protects Wheels From Damage During Installation/Removal Of Snap-In Valve Stems. Virtually Unbreakable. Angled Tubeless Tire Valve Inserting And Removing Tool Valve Fishing Tool - Cable Type - 24" Length. Combines valve core wrench and deflating pin with flexible cable for fishing valve through rim hole. 24” length Black Heat Treated Heavy Duty Tire Valve Repair Tool. 4-in-1 Standard Valve Tool Repairs Cap Threads, Repairs Core Threads. Easy-Out Feature For Removing Damaged Cores & Removing Standard Caps Economy 4-Way Valve Core Tool (Black) Economy Standard Bore 4-Way Tool Tube Deflator. Removes Air Completely, Quickly After The Valve Core Is Moved. Fits On Every Type Of Standard Bore Valve Cable Valve Fishing Tool. Valve Core Wrench And Deflating Pin With Flexible Cable For Fishing Valve Through Rim Hole Double-Use Tool. Removes Valve Cores. Screws On Valve Mouth To Open Core Heavy Duty 4-Way Valve Core Tool Core Remover Tool For Broken Cores. Screwdriver Grip. Easy Out For Removing Broken Cores 469-00002 469-00567 469-00011

271 VALVES & ACCESSORIES VALVE HARDWARE TOOLS 469-11115 469-01115 469-00673 469-00018 469-00020 469-00609 469-32856 469-05262 VALVE AND CORE TOOLS ASCOT NO. MFG. NO. 469-00018 469-00020 469-00609 469-01115 469-05262 469-11115 469-32855 469-32856 469-52000 469-00673 VSW18 VSW20 TL-609 VT-1115 5262 VT-1115I 3285D 3285E S-2 673-D 469-52000 DESCRIPTION Valve Stem Ratchet. For TR570 Series Valves Valve Stem Ratchet. For TR540 Series Valves Chain Valve Fishing Tool. Guides Valve Smoothly Through Rim Hole While Mounting Tire & Tube Valve Core Tool. For Inserting And Removing. Valve Cores. Long Hex Body For Easy Access Tube Deflating Aspirator. Screwing Aspirator Onto Valve Mouth And Applying Air Chuck To Threaded Inlet Creates Vacuum That Siphons Air From Tube Recessed Valve Core Tool. Core Tool Is Recessed Into The Handle. Design Eliminates The Possibility Of The Tool Poking Through A Shirt Pocket. Easily Fits Into A Shirt Pocket. Includes Clip Lock-On Screwdriver Core Tool. 5" Effective Length. Allows The Valve Core To Stay Attached To The Tool After It Is Removed From The Valve. Protects The Valve Core From Loss. Aluminum Handles Provide A Sturdy Grip For Inserting And Removing Valve Cores Lock-On Screwdriver Core Tool. 6.5" Effective Length. Allows The Valve Core To Stay Attached To The Tool After It Is Removed From The Valve. Protects The Valve Core From Loss. Aluminum Handles Provide A Sturdy Grip For Inserting And Removing Valve Cores Valve Capper Inner Dual Valve Core/Cap Tool Screwdriver/Core Tool. Lock-On Feature For The Valve Core. Metal Pocket Clip. Flat-Head Screwdriver Tip

VALVES & ACCESSORIES VALVE HARDWARE TOOLS POCKET TRUCK GAUGES ASCOT NO. MFG. NO. 476-10150 476-10160 476-10130 GA-150 GA-160 GA-130 DESCRIPTION Straight-On/Angled Gauge. 20 -120 psi. Chrome Plated Straight-On/Angled Gauge. 20 -120 PSI. Black Baked Epoxy Protective Finish Dual Foot Angled Pencil Gauge. 20 -120 psi 272 AUTOMOTIVE TIRE GAUGES • Pencil, chrome tire gauges with nylon indicator bars ASCOT NO. MFG. NO. 476-10105 GA-105 476-10115 476-10100 476-10110 GA-115 GA-100 GA-110M RANGE 10-50 PSI NYLON INDICATOR BARS TYPE Passenger Gauge 20-120 PSI High Pressure Gauge 1-20 PSI 10-50 PSI Low Pressure Gauge Passenger Gauge 75-340 kP Calibrated in PSI & kPa 476-10120 GA-120M 20-120 PSI High Pressure Gauge 150-280 kPa Calibrated in PSI & kPa 476-10125 476-10145 GA-125 GA-145 5-45 PSI 10-75 PSI Air/Liquid Gauge Mid-Range Gauge 70-500 kP Calibrated in PSI & kPa * Imprinted gauges available with your name DUAL FOOT ANGLE TRUCK SERVICE GAUGE • Used to check accuracy of gauges • Calibrated 10 -160 PSI ASCOT NO. MFG. NO. 476-10140 GA-140 DESCRIPTION Dual Foot Angle Truck Service Gauge 476-10140 ASCOT NO. MFG. NO. 476-10480 1048T 476-10135 476-11135 476-10155 476-10165 476-11148 476-11155 476-11048 476-10185 476-11185 GA-135 GA-135S GA-155 GA-165 1048S GA-155S 1048-ADJ GA-185 GA-185S DESCRIPTION Dual Chuck Service Gauge, Straight-On/ Angled With Metal Bar, Black Epoxy Finish Angle Chuck With Nylon Bar Same As Above, Angle Chuck With Metal Bar Straight-On With 30° Reverse Chuck Same As Above, Straight-On With 30° Reverse Chuck, Black Epoxy Finish Dual Straight Service Gauge, Short Length Same As Above, Straight-On With 30° Reverse Chuck, Metal Bar Internal Adjustable Field Service Gauge Dual Foot Service Gauge With Nylon Bar, 180° Chuck, Chrome Plated Same As Above, Dual Foot Service Gauge With Metal Bar TRUCK SERVICE GAUGES 476-10125 • Wide variety of service gauges to accommodate the numerous tire and wheel configurations encountered by tire service personnel • Available in chrome plated or protective black epoxy finish as indicated • Calibrated from 10-150 PSI in 2-pound increments • Nylon or metal indicator bars 476-10150 476-10160 476-10130 476-10135 476-10155 476-10165 476-10185

273 VALVES & ACCESSORIES Why do you need Quality Air Gauges? Keeping an eye on tire pressure is a critical part of regular inspection and maintenance. Tire pressure is a critical function in many different ways. Underinflated (or grossly overinflated) tires don’t handle safely, and if you find yourself in a “steer out of trouble” situation, improperly inflated tires can get you into a lot of trouble. Low tires heat up and can blow out, not only destroying the tire but also putting you in an accident-likely situation. Keeping tires properly inflated also makes sense from a dollars and sense perspective: Underinflated tires wear out more quickly. Overinflated tires can make the ride rough, and actually wear out suspension parts. And yes, fuel economy is really affected by tire inflation. The solution to these safety and money issues is as simple as regularly checking tire inflation, and for this you need an accurate tire pressure gauge. PLEASE USE THIS GAUGE ACCURACY GUIDE AS A HELPFUL TOOL! A QUICK GUIDELINE FOR OUR GAUGES IS SHOWN WITH THE PRODUCTS IN THE SECTIONS BELOW GOOD BETTER ACCURACY ACCURACY BEST 3% 1-2% .5% ACCURACY A 1-2%CCURACY A 1-2%CCURACY ANALOG GAUGES RECOMMENDED FOR ALL TYPES OF VEHICLES DIGITAL GAUGES RECOMMENDED FOR ALL TYPES OF VEHICLES 477-48216 0-174 PSI GOOD BETTER ACCURACY ACCURACY BEST 3% 1-2% .5% ACCURACY A 1-2%CCURACY PENCIL GAUGES RECOMMENDED FOR ALL TYPES OF VEHICLE GOOD BETTER CURACY ACCURACY BEST 3% 1-2% .5% ACCURACY 105 PSI 476-10160 20-120 PSI 0-138 PSI GOOD ACCURACY BETTER ACCURACY BEST 3% 1-2% .5% ACCURACY A1-2%CCURACY TRUCK SERVICE GAUGES RECOMMENDED FOR ALL TYPES OF VEHICLES GOOD BETTER ACCURACY ACCURACY 476-1015 10-150 PSI BEST 3% 1-2% .5% ACCURACY GOOD BETTER ACCURACY ACCURACY A .5%CCURACY DIGITAL GAUGES RECOMMENDED FOR ALL TYPES OF VEHICLES 477-10001 0-174 PSI BEST 3% 1-2% .5% ACCURACY A 1-2%CCURACY BAYONET & SIGHT GLASS GAUGES RECOMMENDED FOR ALL TYPES OF VEHICLES ASSEMBLED IN THE USA GOOD BETTER ACCURACY AC ACCURACY BEST 3% 1-2% .5% ACCURACY 476-32921 10-160 PSI 477-00001 0-150 PSI 477-10312 1-174 PSI

VALVES & ACCESSORIES TIRE GAUGES DIGITAL TIRE GAUGES • Large, easy-to-read LCD numbers for precise readings • Features pinpoint accuracy, convenient air bleed,protective casing • Features dual foot chuck • Reads 3 to 160 PSI DIAL GAUGE W/ EXTENSION HANDLE & BLEEDER VALVE • 18" Standard & Large Bore Gauge w/Extension • Handle & bleeder valve • Calibrated 0-160 PSI in 5 PSI increments HANDLE & BLEEDER VALVE 274 476-10500 ASCOT NO. MFG. NO. 476-00276 GA-276 ASCOT NO. MFG. NO. 476-10500 DT-105 DESCRIPTION Digital Passenger Gauge DIGITAL TRUCK TIRE GAUGE • OPERATING RANGE: 0-180 PSI • ACCURACY: +/- 1% + 0.5 PSI at 100 PSI • Auto power off, simple operation • Built-in backlight with clear, large LCD display STANDARD AND LARGE BORE AIR/LIQUID MASTER GAUGE • Straight-on air chuck fits both standard and large bore valves • Calibrated to 0 to 160 PSI in 1 PSI increments and 0-1100 in kPa metric scale • Has recalibration feature and replaceable filters 478-03238 ASCOT NO. MFG. NO. N/A 476-03238 DESCRIPTION Digital Truck Tire Gauge ASCOT NO. MFG. NO. 476-00290 GA-290 DESCRIPTION Standard and Large Bore Air/Liquid Master Gauge ARD & ARGE BORE DESCRIPTION Dial Gauge w/ Extension Handle & Bleeder Valve - 0-160 PSI DIGITAL POCKET GAUGE LARGE BORE DIAL AIR GAUGE • RANGE: 0-150 PSI in .5 PSI increments • ACCURACY: ±1% PSI accuracy • Large LCD display • Red backlight • Angled chuck head • 15" Large Bore Air G built-in filter and ac reservoir for easy cleaning 476-32380 ASCOT NO. MFG. NO. 476-32380 3238P DESCRIPTION Digital Pocket Gauge w/ Angle Chuck - 1-150 PSI ASCOT NO. MFG. NO. 476-30377 DESCRIPTION GA300-377 Large Bore Dial Air Gauge

275 VALVES & ACCESSORIES TIRE GAUGES ADJUSTABLE FIELD SERVICE GAUGES DIGITAL TIRE PRESSURE GAUGE • OPERATING RANGE: 4-100 psi • Automatically shuts off after 30 seconds of non-use to save battery life • Easy-grip handle features innovative material to ensure gauge is held properly for the most accurate reading • Field adjustable truck service gauges • External Adjustment Screw makes calibration quick & easy • Adjustable Calibration • Plated finish provides corrosion protection and great looks • 4-sided metal indicator bar is durable and easy to read • Hang-up ring provides a convenient method of storage • Flat-head screwdriver required for calibration ADJUSTABLE CALIBRATION AU SHUT EXTERNAL ADJUSTMENT SCREW EASY GRIP HANDLE 476-05900 ASCOT NO. MFG. NO. 476-05900 476-05988 5900 5988 DESCRIPTION Digital Tire Pressure Gauge Digital Tire Pressure Gauge w/ Backlight 476-05988 The External Adjustment Screw makes calibration quick & easy. 476-01046 DILL TRUCK TIRE GAUGES 1-2% ACCURACY ASCOT NO. 476-07125 476-07233 476-07262 476-07275 476-07285 476-17275 476-17285 476-27275 476-37285 MFG. NO. DESCRIPTION 7125H 7233 7262 Straight and 30 Degree Reverse, Chrome, White Nylon Bar 360 Deg. Swivel for Standard and Large Bore Straight and 30 Degree Reverse, Black, Black Metal Bar 7275RB Adjustable Truck Service Gauge with 25 Degree Offset Angle Chuck (Internally Adjustable) 7285R Dual Foot Service Gauge With Reverse Angle Chuck (Internally Adjustable) 7275RBE Adjustable Truck Service Gauge with 25 Degree Offset Angle Chuck (Externally Adjustable) 7285E 7275 7285 External Adjustable Truck Service Gauge Dual Angle, Chrome, Black Metal Bar Straight and 30 Degree Reverse, Chrome, Black Metal Bar 476-17285 476-07275 ASCOT NO. MFG. NO. 476-00135 476-00165 476-00185 DESCRIPTION 135S-RCL Adjustable Dual Foot Service Gauge 165S-RCL Adjustable Dual Foot Service Gauge 185S-RCL Adjustable Dual Foot Service Gauge -180 Degree Reverse Chuck 476-00250 250S-RCL Adjustable Large Bore Pencil Gauge 476-00255 476-01046 476-11048 1048-ADJ 255S-RCL Adjustable Large Bore Swivel Gauge 1046-ADJ Screwdriver Adjustable Calibration Gauge Internal Adjustable Metal Bar Gauge 1-2% ACCURACY

VALVES & ACCESSORIES MADE IN THE USA MASTER TEST GAUGE • For checking accuracy of service and pencil gauges • Has dual foot chuck and a retaining valve to hold pressure reading after gauge is removed from valve to within +/- 2% of total dial reading • Includes protective case • MADE IN THE USA MASTER AIR GAUGE CHECKING STATIONS • INFLATION RANGE: 0-200 PSI • ACCURATE TO: ±1 PSI • Designed to allow users to quickly and accurately check their air gauges and inflator gauges • THREE CHECKING POINTS: standard valve port, large bore valve port & female coupler port • Most accurate checking station on the market • Equipped with a regulator and filter for proper air and water filtration • CARB Certified • Back-lit readout for ease of use • Can be mounted to a bench or a wall GAUGE CHECKING STATIONS 276 ASCOT NO. MFG. NO. DESCRIPTION 476-08860 8860C RANGE Master Test Gauge 0 - 160 PSI DILL AIR GAUGE CHECKING STATIONS • A quick accurate way for tire dealers to check the accuracy of air gauges - a must for facilities that need to comply with California standards • 0-160 psi liquid filled gauge • Access valve mounted on a pressure reservoir • 1/4 inch NPT filter/regulator to remove contaminants from compressed air • A certificate of accuracy for ISO records • Designed to easily bolt to a wall or table • Made, tested & certified in the USA • Accuracy : ±1 PSI MADE IN THE 476-08500 USA 476-08860 476-35020 476-35021 ASCOT NO. MFG. NO. DESCRIPTION 476-03502 476-08500 476-08501 3502 8500 8500D 476-08900 8900 476-08501 Replacement Digital Air Gauge Dill Air Gauge Checking Station (With large bore port) Dill Digital Air Gauge Checking Station (With large bore port) Replacement Dial Air Gauge (Fully Calibrated) ASCOT NO. MFG. NO. 476-35020 476-35021 DESCRIPTION TS3502A TS3502AL Digital Gauge Checking Station Air/Liquid Gauge Checking Station

277 VALVES & ACCESSORIES DILL USA GAUGES MADE IN THE USA 476-07277 A 476-05602 476-05603 476-05604 476-07212 476-07213 476-07215 476-07226 476-07229 476-07230 476-07277 476-07290 476-01941 476-07291 476-05600 476-15600 476-25600 476-35600 476-45600 5600-CH-USA 5600-ST-USA 5600-CF-USA 7212-USA 7213-USA 7215-USA 7226H 7229-USA 7230-USA 7277-USA 7290-USA 941-USA 7290-PK-USA 5600-B-USA 5600-CJ-USA 5600-DL-USA 5600-V-USA 5600-E-USA DILL USA PENCIL GAUGES B DILL USA PENCIL GAUGES ASCOT NO. MFG. NO. RANGE 10-75 PSI 10-75 PSI 10-75 PSI 20-120 PSI 10-50 PSI 20-120 PSI 20-120 PSI 1-20 PSI 5-45 PSI 10-75 PSI 20-90 PSI 20-120 PSI 20-90 PSI 10-75 PSI 10-75 PSI 10-75 PSI 10-75 PSI 10-75 PSI DESCRIPTION Chrome Finish Gauge Standard Silver Gauge Classic Camouflage Gauge High Pressure Gauge Passenger Car Gauge High Pressure Gauge Small Diameter Straight Chuck - Fits Standard and Large Bore Low Pressure 1/2 PSI Units Air Liquid Gauge Assorted 10 Colored Pencil Display Pack Standard Blue Pencil Gauge High Pressure Gauge Breast Cancer Awareness Pencil Gauge Standard Gold Finish Gauge Standard Green Finish Gauge Standard Blue Finish Gauge Standard Violet Finish Gauge Standard Red Finish Gauge DILL USA DUAL FOOT TRUCK GAUGES ASCOT NO. MFG. NO. RANGE 476-07248 476-07263 476-07278 7248-USA* 7263-USA* 7278-USA* 20-120 PSI 20-120 PSI 20-120 PSI DILL USA DUAL FOOT TRUCK GAUGES FINISH Chrome Aluminum Camouflage Chrome Chrome Gold Chrome Chrome Chrome Chrome Blue Silver Pink Gold Green Blue Violet Red QTY./PACK 10 200 10 10 10 10 10 10 10 10 200 10 50 10 10 10 10 10 DESCRIPTION FINISH Dual Angle Foot Chuck Straight-On 30° Reverse Chuck Straight-On 30° Reverse Chuck DILL USA TRUCK SERVICE GAUGES ASCOT NO. MFG. NO. RANGE 476-00001 476-00002 476-00003 SG1 SG2 SG3 10-150 PSI 10-150 PSI 10-150 PSI Chrome Black Powder Chrome QTY./PACK 10 10 10 DESCRIPTION FINISH Dual Foot Head; Chrome Body with Black Markings on a White Bar Dual Foot Head; Chrome Body with White Markings on a Black Bar - Adjustable * Denotes gauges meet the proposed California Regulation for Under Inflated Vehicle Tires No. 95550. Chrome Chrome Dual Foot Head; Black Powder Coated Body with White Marking on a Black Bar - Adjustable Black Powder QTY./PACK 1 1 1 476-05602 476-05604 476-07226 476-07230 476-07248 476-07263 476-00002 476-00003

VALVES & ACCESSORIES AIR CHUCKS BALL FOOT CHUCKS 478-04500 478-00305 DUAL FOOT AIR CHUCK 478-05451 278 478-02985 478-00001 ASCOT NO. MFG. NO. 478-00305 478-00315 CH-305 CH-315 478-00325 478-05451 CH-325 DESCRIPTION Ball Foot Chuck. 1/4" Female Thread (Normally Closed) Ball Foot Chuck With Lock-on Clip. 1/4" Female Thread (Normally Closed) Ball Foot Chuck With Lock-on Clip. 1/4" Female Thread (Normally Open) 9-145451 Ball Foot Chuck With Lock-on Clip. 1/4" Female Thread (Normally Closed - Alligator) 478-00707 — 478-04500 478-04501 CH-318 — Replacement Washer. For 478-05451 Ball Foot Chuck Air Chuck Clip. For All Ball Foot Chucks Economy Clip for Clip-On Ball Foot Air Chuck EUROPEAN-STYLE CLIP-ON CHUCKS ASCOT NO. MFG. NO. 478-00001 AC-1 478-02985 478-02995 478-06293 CH-360 DESCRIPTION 478-06293 European-Style Clip-On Chuck. Serrated Shank for 1/4” I.D. Hose. Silver (Normally Open) European-Style Clip-On Chuck. 1/4” Female Fitting. Silver Clip (Normally Closed) CH-360-OP European-Style Clip-On Chuck. 1/4” Female Fitting. Black Clip (Normally Open) 6293-S European-Style Clip-On Chuck. 1/4" Barbed Fitting. Straight Clip Chuck. Small Head Design. Silver Clip (Normally Open) LOCK-ON AIR CHUCKS ASCOT NO. MFG. NO. 478-00340 CH-340 ASCOT NO. MFG. NO. 478-00335 478-01330 CH-335 6568-FT 478-01335 478-01350 478-01351 DESCRIPTION Lock-On Air Chuck. 1/4” NPT Female Thread. Securely Locks Onto Valve When Sleeve Is Pushed Forward 478-01340 478-05265 CH-340-OP Lock-On Air Chuck. Available For Use With Tire Changers H-5265 Lock-On Air Chuck. Specially Designed To Lock Onto The Cap Of A Standard Bore Valve Stem When The Sliding Sleeve Is Pushed To Forward Position 478-00340 478-01352 478-03300 478-03301 478-03330 478-03370 478-06585 478-05265 6568TL CH-330 DESCRIPTION Angled Chuck. Plated Finish (Normally Closed) Dual Foot Chuck. 1/4" FPT, 6" Long, Lock-On Threads (Normally Open) CH-335-OP Angled Chuck. Plated Finish (Normally Open) CH-350-LO Straight-On/Angled Chuck. Protective Black Epoxy Finish (Normally Closed) 6568T-FT Straight-On/Angled Chuck. Black Epoxy Finish (Normally Open) Dual Foot Black Chuck 14" (Normally Closed) CH-330-LO Straight-On/Angled Chuck. With LockOn Threads (Normally Closed) Straight-On/Angled Chuck (Normally Closed) CH-333-LO Straight-On/Angled Chuck. 14” Long (Normally Closed) CH-370-LO Straight-On/180° Chuck. 1/4” NPT (Normally Closed) 6585LB Large and Standard Bore Chuck. 1/4” NPT (Normally Closed) 478-00335 478-01350 478-01352 478-03300 478-03370 478-06585

279 VALVES & ACCESSORIES DILL USA CHUCKS A DILL USA AIR CHUCKS MADE IN THE USA 478-06172 478-06173 478-06176 DILL USA AIR CHUCKS ASCOT NO. MFG. NO. 478-06172 478-06173 478-06174 478-16174 478-06175 478-06176 478-06999 478-16999 478-06171 478-08914 6172-USA 6173-USA 6174-USA 14" 6174-BLK-USA 14" 6175-USA 6176-USA 6999-USA 7" 6" 6.5" 6999L-USA 6.5" 6171-USA 8914-L 8" 5.5" 478-06174 LENGTH DESCRIPTION 6" 6" 478-06175 FINISH Angle Chuck for Inner Dual Wheels with Tilted Valves Lock Feature Straight-On 180° Degree Reverse Angle Chuck Extra Long Length Lock Feature Straight and 30° Reverse Angle Chuck Extra Long Length Lock Feature Straight and 30° Reverse Angle Chuck Lock Feature Straight-On 30° Reverse Angle Chuck For Standard Air Line Service Straight with 30° Reverse Angle Chuck Same as 6999-USA Except for Lock-On Dual-head locking chuck; forward & reverse design Large Bore Straight Push-On Lock-On Chuck with 5.5" Handle Chrome Chrome Chrome Black Powder Black Powder Chrome Chrome Chrome Nickle Plated Brass Chrome QTY./PACK 10 10 10 10 10 10 10 10 10 10 478-16999 478-16999 478-06171

VALVES & ACCESSORIES AIR CHUCKS REVERSE ANGLE LOCK-ON AIR CHUCK • Reverse angle lock-on chuck allows easy access to outer dual valve EASY ACCESS TO OUTER VALVE 478-00345 ASCOT NO. MFG. NO. 478-00345 CH-345 478-01345 DESCRIPTION Reverse Angle Lock-On Air Chuck (Normally Closed) CH-345-OP Reverse Angle Lock-On Air Chuck (Normally Open) AUTO LOCKING DESIGN TRUCK LOCK-ON EXTENSION CHUCK • Extended reach for dual wheels • Easy on/off application • Steel pins for increased service life • Automatic locking design • Improves seal on flow through caps • 22" overall length 280 LONG REACH STRAIGHT LOCK-ON CHUCK EASY ON/OFF APPLICATION ASCOT NO. MFG. NO. 478-00346 CH-346 478-01346 DESCRIPTION Long Reach Straight Lock-On Chuck (Normally Closed) CH-346-OP Long Reach Straight Lock-On Chuck (Normally Open) 478-00346 EUROPEAN-STYLE CLIP-ON CHUCK 478-32072 478-02975 ASCOT NO. MFG. NO. 478-02975 DESCRIPTION CH-360S European-Style Clip-On Chuck. 1/4" Female Fitting - With Spring Loaded Deflector Pin ASCOT NO. MFG. NO. 478-32072 DESCRIPTION 3207I-L2 Truck Lock-On Extension Chuck

281 VALVES & ACCESSORIES AIR CHUCKS LARGE BORE GAUGES LARGE BORE AIR CHUCKS 478-00322 478-00326 478-00377 478-00328 478-04660 478-06294 476-10240 454-05131 478-06190 ASCOT NO. MFG. NO. DESCRIPTION 476-02555 GA255S-RCL Recalibrateable Large Bore Swivel Gauge. Nickle Plated Brass. Metal Slide Bar. Calibrated 10-150 PSI in 2 lb. Units. Swivels 360° for Those Hard-to-Reach Valves 476-07233 7233 476-10240 GA-240 476-10250 GA-250S 476-10255 GA-255S 454-11410 ASN-1410 Dill Swivel Gauge Straight-On Gauge. 20 - 120 PSI 478-00328 Swivel Gauge. Nickel Plated Brass. Plastic Bar. Calibrated 10 - 150 PSI In 2 lb. Units. Swivels 360° For Those Hard-To-Reach Valves Swivel Gauge. Nickel Plated Brass. Metal Slide Bar. Calibrated 10 - 150 PSI In 2 lb. Units. Swivels 360° For Those Hard-To-Reach Valves Off-Highway Tire Tread Depth Gauge. Calibrated With 32nds And MM. Magnified Sight Glass For Easy Readability. Pouch Included 478-00377 478-04660 478-06190 478-10013 478-06294 478-16294 AC-B10 AC-B11 AC-B12 6190 10013 6294D 6294E ASCOT NO. MFG. NO. DESCRIPTION 478-00322 322 478-00326 326 Large Bore Dual Foot Air Chuck. 45° Chuck For Easy Access To Valve. 1/4" NPT Female Thread Screw-On Air Chuck. .458"-26 Internal Thread. 1/2” NPT External Thread. Full Flow For Seating Of Tire Beads Short Lock-On Air Chuck. Locks On Valve When Cocked On Threads. Greater Air Flow And Seat Cannot Be Blown Out If Seal Fails. 1/4" NPT Thread Long Lock-On Air Chuck Clip-On Air Chuck. Locks Onto Valve When Sleeve Is Pushed Forward, Releases When Sleeve Is Pulled Back. 1/4" NPT Female Thread Quick Connection Inflation Gauge. For Use With 6185 Check Valve. Sliding Sleeve Locks Chuck Onto Check Valve. Permits Unrestricted Air Flow Large Bore Screw-On Chuck. Fits 3/8" ID Air Hose Large Bore Chuck-Closed 1/4-18 NPTF air port; 23 SCFM flow rate; 200 PSI max working pressure Large Bore Chuck - Open; 1/4-18 NPTF air port; 23 SCFM flow rate; 200 PSI max working pressure 478-10013 478-16294 476-10250 476-10255

VALVES & ACCESSORIES INFLATOR GAUGES AUTOMATIC INFLATOR • All the features of a wall mounted inflator in a portable hand held unit • BUILT-IN OVERPRESSURE SETTING FUNCTION • Auto on/off operation • MAX INFLATION: 174 PSI • Accuracy exceeds EC Standards • Multiscale gauge • Serial/batch numbered • Backlit digital display • Wire sheathed hose eliminates kinking • Tough poly carbonate/ABS body • Two programmable pre-set preset buttons • Fast and safe 5' hose with lock-on chuck • Built-in rechargeable lithium-ion battery • Up to 15 hours of continuous use • Includes AC adapter for charging & certificate of calibration ASCOT DIGITAL INFLATOR • Auto on/off operation • MAX INFLATION: 174 PSI • Accuracy exceeds EC Standards • Multi-scale gauge • Serial/batch numbered • Backlit digital display • Wire sheathed hose eliminates kinking • Impact absorbing bumpers • Rubber grip on chuck • Tough die cast aluminium body • 20" hose with hold-on chuck • Quick and easy to use • Includes certificate of calibration 282 477-11612 TOUGH AND DURABLE 477-10312 ASCOT NO. MFG. NO. 477-11612 DESCRIPTION 11.0612NA Automatic Inflator - 5' Hose w/ Clip-On Air Chuck ASCOT DIGITAL TIRE INFLATORS • INFLATION RANGE: 0-174 PSI • ACCURATE TO: ± 1.2 psi • Auto ON, upon air pressure sensing • Large tilted LCD display with backlight and 90 second auto OFF • Multi-scale gauge • Die-cast aluminum unit with rubber protective sleeve • Lightweight handle and trigger • Wire sheathed hose on flex area of hose to eliminate kinking • 6' stainless steel hose included loose ASCOT NO. MFG. NO. 477-10312 10.3012RPG Digital Inflator w/ 20" Hose and Hold-On Air Chuck 477-48216 ASCOT NO. MFG. NO. 477-48216 DESCRIPTION H48SSH21 Digital Tire Inflator w/ 21" Stainless Steel Hose & 6' Stainless Steel Hose 477-11239 477-11240 477-11241 477-11242 H48-10C-6 H48-10C REPLACEMENT HOSES 6' Rubber Hose 21" Rubber Hose H48-10SSC 21" Stainless Steel Hose H48-10SSC-6 6' Stainless Steel Hose 477-11242 Included DESCRIPTION

283 VALVES & ACCESSORIES INFLATOR GAUGES PRO DIGITAL TIRE INFLA • ACCURATE: Measures in PSI (0-25 (0-1800), kg/cm2 (0-18), and Bar (0Meets ANSI/ASME B40.1 standards • SWIVELS: Reads at any angle, lays fla your toolbox. Gauge protected by rubber boot • BACKLIT DISPLAY: Auto-on when tire pressure is detected; Auto-off aft inactivity to save battery • EASY HANDLING: Durable/ergonomic grip. Quick fine tuning in case you exceed the target pressure • 6" STRAIGHT FOOT CHUCK: Full swivel and hose w/threaded lock-on design, enabling hands-free inflation DIGITAL HAND-HELD TIRE INFLATOR* • INFLATION RANGE: 0 - 174 PSI • ACCURACY: +/- .2 PSI • 6' Hose • Lightweight shock-resistant design • High specification ceramic sensor • Long life, easily replaceable battery • Available in custom hose lengths and chuck styles • Valve has provisions for checking air pressure during inflation • Threaded for 1/4" male NPT hose fittings 477-00577 ASCOT NO. MFG. NO. 477-10001 DESCRIPTION Accura 1 Digital Hand-Held Tire Inflator * This gauge provides more accurate air pressure readings which is essential with TPMS. ASCOT NO. MFG. NO. DESCRIPTION 477-00577 S-577D Pro Digital Tire Inflator - 15" Hose w/ Lock-On Threads MK4 HEAVY DUTY HAND-HELD INFLATOR PRECISION DIGITAL TIRE INFLATOR • Most accurate pressure gauge on the market (0-160 PSI), Extreme ± 0.05% Accuracy • EASY-TO-READ DIGITAL DISPLAY: Large articulating easy to read digital display that is easy to read in any light condition, at any angle, display automatically adjusts for left or right handed use, or vertical portrait mode • High contrast electrophonic screen • AUTO ON/OFF FEATURE: Powers on when air presser is detected, power off after 120 seconds of inactivity • Deflation button • Job site work light, valve cap holder, integrated hang hook for storage • NEW VIEWING WINDOW: Lar window gives 20% greater field of viewing • LIGHTER WEIGHT: G body weighs 2.035lbs, less work strain and easier for repetitive use • BIOMORPHIC SHAPE: Ergonomic, easier to use and less prone to damage when dropped • NEW VALVE MECHANISM: Simplified 2-stage mechanism design prevents user having to “push” against full line pressure on deflate preventing fatigue • NEW PISTON & SEAL DESIGN: New design, less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy • NEW CLEAR LITHOGRAPHIC DESIGN: Fast and accurate reading of results • MAXIMUM INFLATION PRESSURE: 160 PSI ASCOT NO. MFG. NO. 477-00587 DESCRIPTION S-580e-KIT Precision Digital Tire Inflator - Dual Foot Chuck ASCOT NO. MFG. NO. 477-10004 MK4 ! CAUTION DESCRIPTION MK4 Heavy Duty Hand-Held Inflator WARNING: Never inflate a tire on a multi-piece rim (a rim made up of 2 or more separate pieces) unless the tire and rim are mounted in OSHA regulation 29-CFR Part 1910.177 or D.O.T. approved tire inflation cage. OSHA Regulations require that an inflator gauge must be equipped with a lock-on chuck and have a hose extension sufficiently long for the operator to stand clear of the possible trajectory of a multi-piece rim. NEW PISTON & SEAL DESIGN

VALVES & ACCESSORIES INFLATOR GAUGES HEAVY DUTY HOSE INFLATOR DILL DIGITAL TIRE INFLATOR GAUGE • Digital backlight readout • 0-170 PSI range • 2 or 6ft. hose • Clip-on or dual-foot chuck • ASSEMBLED AND TESTED IN THE USA • USA MADE HOSE •USA MADE AIR CHUCK CLIP-ON OR DUAL FOOT CHUCK B READOUT TWO ASCOT NO. MFG. NO. 477-76023 477-76029 477-72603 DESCRIPTION 7260-2-6293E 7260-2-6999FT 7260-9-6293E 477-72609 7260-9-6999FT Digital Inflator - 2 Ft. Hose - Clip-On Chuck Digital Inflator - 2 Ft. Hose - Straight Chuck Digital Inflator - 9 Ft. Hose - Clip-On Chuck Digital Inflator - 9 Ft. Hose - Straight Chuck SEPARATE CLIP-ON CHUCKS 477-00404 • Has two separate clip-on chucks with fiv foot hoses • One chuck, CH-360, fits standard bor the other, H-4660A, lar valves • Has springloaded, hand-operated valve and has provisions for checking air pressure during inflation • Threaded for 1/4" male NPT hose fittings • Hose length can vary 284 ASCOT NO. MFG. NO. 477-00404 I-404 DESCRIPTION Heavy Duty Hose Inflator HIGH FLOW ANALOG INFLATOR • Range: 10-140psi / 100-950kPa • Increments: 2psi / 20kPa • Fastest industry flow rate • Features bleeder valve • Assembled & tested in USA 477-06175 CHUCK TIRE INFLATOR GAUGES • ACCURATE: Performance-tested and calibrated. Measures in pounds per squar inch (PSI, 10-160, 2-lb. increments) • Kilopascal readings also available per special order (kPa, 80-840, increments of 20) • HEAD CHUCK: Makes tire valves mor with the two heads for easier acces EASY-TO-USE INFLATOR: Heavy-dut construction, magnifying window lens, full-s chuck, 15-inch hose • REPLACEABLE P Gauge and valve cartridges can bo ASCOT NO. MFG. NO. 477-06175 DESCRIPTION 72-6-6175G High Flow Analog Inflator ASCOT NO. MFG. NO. 477-00506 S-506 477-00516 S-516 DESCRIPTION Dual Head Chuck Tire Inflator Gauge Straight Foot Chuck Tire Inflator Gauge

285 VALVES & ACCESSORIES TIRE INFLATORS HIGH VOLUME TIRE INFLATOR • For Fleet Operations, Service Centers, or Mounters • APPLICATIONS: For 19.5" and larger rims • Capable of inflating four 22.5" tires from 5 to 100 PSI in 5 minutes 475-89003 ASCOT NO. MFG. NO. DESCRIPTION 475-89003 89XDB High Volume Tire Inflator SINGLE TIRE INFLATION HOSES & ACCESSORIES OVER INFLATION & HIGH VOLUME INFLATION SYSTEM • For Retreaders, Fleets or Mounters • Inflate single or multiple tires to a preset over-pressure setting • Unit then performs a leak test for “zipper leaks” • Deflates to final preset required PSI setting • Features 3 preset PSI settings 475-89004 ASCOT NO. MFG. NO. DESCRIPTION 475-89004 475-01898 478-00820 SINGLE TIRE INFLATOR • Ideal for vehicle service centers, automobile dealerships and rental facilities • 1/4" inlet/outlet • OPERATING RANGE: 5-145 PSI Single Tire Inflator Video 475-89001 ASCOT NO. MFG. NO. 475-89001 89XDA DESCRIPTION Single Tire Inflation System 89 XDZ Over Inflation & High Volume System ASCOT NO. MFG. NO. 475-00896 475-01892 475-01893 475-01894 475-01895 475-01896 475-01897 475-01898 478-00820 IN20 89-2 WASV 2 Way Automatic Switching Valve (2 Hoses) 89-3 WASV 3 Way Automatic Switching Valve (3 Hoses) 89-3 WTK 3 Way Automatic Switching Valve Kit Core Removal and Inflation Tire Chuck Specify Hose length when ordering. Components available separately. DESCRIPTION SVL-STD 89HKC-L 89HKC-LC 89HKT-L 89HK1-25 4' Mounting Steel Swivel Stand Straight Hose w/Coupler & CH3600P Chuck Coil Hose w/ Coupler and CH-360OP Chuck Straight Hose w/Coupler & CH 330-LO-OP Chuck Straight Hose w/Coupler & IN-20 Tool 477-00060 AUTOMATIC TIRE INFLATORS • Inflate or deflate your tires automatically up to 145 psi • Wall-mounted unit with 25’ air hose to easily reach all tires on the vehicle • Only 2 min. 20 sec. to inflate a 11R22.5 tire from 0 to 100 psi ASCOT NO. 477-00060 MFG. NO. MW-60 Scan For Video • Loud audible signal warns you that the tire has reached the desired pressure • 4 measurement units (psi, bar, kPa, kg/cm2), overpressure system (OPS), LCD screen & backlight DESCRIPTION Automatic Tire Inflator 1 Outlet - Flatematic Single 477-00604 MW-60-4WAY Automatic Tire Inflator 1 Outlet - Flatematic 4 Way 477-00604

VALVES & ACCESSORIES TIRE INFLATORS 4-W INFL • Quick c directly t • Slide v supply t off • Includes all hoses (25 ft) and c MULTIPLE TIRE INFLATION SYSTEM (3-WAY) • Inflates up to three wheels simultaneously at a 5-145 PSI pressure • Semipneumatic locking swivel wheel • Color-coded 0.25" inflation hose • 1/2" and 3/8" inlet/outlet • Suitable for use with standard or large bore valves and core extraction tools • Inlet pressure gauge • Dual LCD screens indicate gauged and targeted pressure 286 ASCOT NO 477-11623 475-89103 11.0623NA 4-Way Inflator Kit 4-WAY INFLATOR ACCESSORY BLOCK •Lightweight aluminum manifold splits air lines into (4) separate lines • Slide valve turns air on/off to start inflation • (4) ¼” universal quick couplers allow for any type fitting • 3’ whip hose MULTIPLE TIRE INFLATION HOSES & ACCESSORIES 478-00360 478-00891 477-11624 ASCOT NO. MFG. NO. 475-89103 DESCRIPTION 89MTIS-3DS Multiple Tire Inflation System (3-Way) ASCOT NO. DESCRIPTION 477-11624 4-Way Inflator Accessory Block 478-00892 6-IN-1 AIR LINE MANIFOLD KIT • Lightweight aluminum manifold • 1/4” air inlet • (6) 1/4” outlets • (3) 1/4” aluminum plugs • Made in Taiwan 478-00894 478-03300 477-47732 ASCOT NO. MFG. NO. N/A 477-47732 DESCRIPTION 6-In-1 Air Line Manifold Kit ASCOT NO. MFG. NO. 478-00360 475-00891 475-00892 475-00893 475-00894 475-00895 475-00896 478-03300 SVL-STD DESCRIPTION CH-360S Chip-On Style Air Chuck (Closed) w/Spring 89HKC-LM Straight Hose w/ CH-360S Air Chuck 89HKT-LM 89HKI-25 89-HMVN 89-3W Air Flow Control Valve 4' Mounting Steel Swivel Stand CH-330-LO Lock-On Style Air Chuck (Dual Wheels) Straight Hose w/Coupler & CH-330-LO Air Chuck Straight Hose w/Coupler & IN-20 Tool (Single Tire) 4-Way Manifold 478-00895

287 VALVES & ACCESSORIES TIRE INFLATORS INFLATOR GAUGES • Ideal for gauging and inflating dual tires on trucks and buses as well as passenger cars and light trucks • Solid brass indicator bar • Allows operator to stand away while inflating and deflating tires • Bleeder valve allows user to adjust tire pressure without touching either the tire or valve stem STANDARD # 477-00001 477-00011 477-00111 477-01111 477-11111 HAND HELD # DIGITAL BODY # DESCRIPTION AIR LINE INFLATOR GAUGE 477-20001 477-30001 12" Hose w/ Dual Foot Chuck N/A 477-20111 477-21111 N/A 477-30011 12" Hose w/ Tapered Chuck 12" Hose w/ Lock-On Chuck 12" Hose w/ No Chuck 477-30111 477-31111 N/A 12" Hose w/ Lock-On Chuck & Bleeder Valve SAFETY INFLATOR GAUGE 477-00002 477-20002 477-30002 3’ Hose w/ Ball Foot (Clip-On) Chuck 477-00003 477-20003 477-30003 3’ Hose w/ Straight Lock-On Chuck 477-00004 477-20004 477-30004 6’ Hose w/ Ball Foot (Clip-On) Chuck 477-00005 477-20005 477-30005 6’ Hose w/ Straight Lock-On Chuck 477-00008 477-20008 477-30008 9’ Hose w/ Ball Foot (Clip-On) Chuck 477-00009 477-20009 477-30009 9’ Hose w/ Straight Lock-On Chuck 477-00010 477-00012 477-00014 477-00015 477-20010 477-30010 12’ Hose w/ Ball Foot (Clip-On) Chuck 477-20012 477-30012 12’ Hose w/ Straight Lock-On Chuck 477-20014 477-30014 6’ Hose w/ No Chuck 477-20015 477-30015 15’ Hose w/ Straight Lock-On Chuck 477-00020 477-20020 477-30020 20’ Hose w/ Straight Lock-On Chuck 477-00033 477-20033 477-30033 3’ Hose w/ EuroStyle Chuck 477-00066 477-20066 477-30066 6’ Hose w/ EuroStyle Chuck 477-00099 477-20099 477-30099 9’ Hose w/ EuroStyle Chuck 477-00112 477-00113 477-00115 477-00118 477-00144 477-01112 477-20112 477-20113 477-20115 477-20118 477-21112 477-30112 3’ Hose w/ No Chuck 477-30113 3’ Hose w/ Sleeve Chuck 477-30115 6’ Hose w/ Black Epoxy Lock-On Chuck 477-30118 9’ Hose w/ No Chuck 477-20144 477-30144 12’ Hose w/ EuroStyle Chuck 477-31112 12’ Hose w/ No Chuck Air Line Inflator Gauge OT NO. DESCRIPTION 477-01006 477-01009 477-01012 477-01025 6' Hose with AC-B12 Large Bore Chuck 9' Hose with AC-B12 Large Bore Chuck 12' Hose with AC-B12 Large Bore Chuck 25' Hose with AC-B12 Large Bore Chuck Safety Inflator Gauge with Ball Foot (ClipOn) Chuck We make customized inflators! LARGE BORE AIR LINE INFLATOR GAUGES • Large Bore inflation unit with in-line gauge • Equipped with AC-B12 large bore chuck • Gauge is calibrated 10-140 PSI in 2 lb. increments • Available in hose lengths of 6', 9' & 12' • 477-01006 Similar to Haltec I-409

VALVES & ACCESSORIES TIRE INFLATORS LARGE BORE INFLATOR SYS • 1/2" ball valve with dial gauge for checking pr • Equipped with saf for releasing pressur emergency • 1/2" NP • 3/8" ID for maximum air flo ASCOT NO. MFG. NO 477-35020 LARGE BORE INFLATOR 477-35020 • includes 8914L inflator adapter • 25' x 1/2" USA-made EPDM rubber hose • Assembled & tested in USA • 2x faster flow rate than 3/8" hose 477-73852 288 I-350ASCOT NO. MFG. NO. DESCRIPTION 477-73892 7389-25 INFLATOR SYSTEM • 1/2" ball valve with dial gauge for checking pressure • Equipped with safety coupler for releasing pressure in case of emergency • 1/2" NPT connection • 3/8" ID for maximum air flow Large Bore Inflator LARGE BORE INFLATOR • Includes 8914L inflator adapter • 25' x 1/2" USA-made EPDM rubber hose • Assembled & tested in USA; 2x faster flow rate than 3/8" hose • 0-160 psi liquid filled stainless steel gauge 477-73852 ASCOT NO. MFG. NO. 477-73893 ASCOT NO. MFG. NO. DES 477-34020 DESCRIPTION 7389G-25 Large Bore Inflator I-340-20 In INFLATOR SYSTEM • Safely removes operator away from blast zone by using the 15' hose • Shut valve (ball valve) enables operator to stop inflation f proper tire inspection • Includes IN-95 and three additional unions to adapt different sizes, such as SLB, MB & ZB ASCOT NO. MFG. NO. 477-49515 I-495-15 SUPER LARGE BORE INFLATOR • Includes AD8 Inflator Adapter • 25' x 1/2" USAmade EPDM rubber hose • Assembled & tested in USA • 2x faster flow rate than 3/8" hose ASCOT NO. MFG. NO. 477-07480 7480 DESCRIPTION Super Large Bore Inflator 477-07480

289 VALVES & ACCESSORIES

SERVICE EQUIPMENT SERVICE EQUIPMENT Tire Changers & Accessories Wheel Balancers & Accessories Lifts Rubber Blocks Lift Pads Rolling Jacks Work Stations

MaxiSYS DIAGNOSTICS IS IN O UR DNA ADVANCED DIAGNOSTICS MS909 S2 DIAGNOSTIC TABLET WITH BLUETOOTH VCI2 PROFESSIONAL DIAGNOSTICS MS906PRO2-TS DIAGNOSTICS AND TPMS TABLET SERVICE & MAINTENANCE MX900 ADVANCED SERVICE + ALL SYSTEMS DIAGNOSTICS 1.855.288.3587 USSUPPORT@AUTEL.COM AUTEL ACADEMY TRAINING autel.us/academy WEB: AUTEL.US FOLLOW US: @AUTELTOOLS MD909 PRO ALL SYSTEMS SCANNER + SERVICE TABLET ULTRA S2 DIAGNOSTIC TABLET WITH 6-IN-1 VCMI2 MS919 S2 DIAGNOSTIC TABLET WITH 6-IN-1 VCMI2 MS906 MAX DIAGNOSTIC TABLET WITH BLUETOOTH VCI

SERVICE EQUIPMENT COATS TIRE CHANGERS MAXX SERIES TIRE CHANGERS All models are engineered to withstand thousands of tire changing cycles and designed to be the durable, high volume tire changers that tire dealers rely on. They include Coats Duckhead Mount/Dismount tool heads, dual nozzle bead sealer, and accommodate larger assemblies easily -- up to a 16" tire width. Ascot No. 443-00902 443-00890 443-08920 443-00891 443-00802 443-10802 443-00880 443-00801 443-00803 443-00804 443-80080 443-80081 443-70701 443-70702 443-70703 443-70704 443-70705 443-70706 443-70707 443-70708 443-70709 443-70710 443-70711 443-70712 443-70713 443-70714 443-70715 443-70716 443-50501 443-50502 443-50503 443-50504 Model 800MAXX90220 800MAXX90A 800MAXX90220L 800MAXX90AL 800MAXX80220 800MAXX802SPD 800MAXX80 800MAXX80A 800MAXX80220L 800MAXX802SPDL 800MAXX80L 800MAXX80AL 800MAXX70220 800MAXX702SPD 800MAXX70 800MAXX70A 800MAXX70220L 800MAXX702SPDL 800MAXX70L 800MAXX70AL 800MAXX70220 800MAXX702SPD 800MAXX70 800MAXX70A 800MAXX70220L 800MAXX702SPDL 800MAXX70L 800MAXX70AL 800MAXX50 800MAXX50A 800MAXX50L 800MAXX50AL Description Maxx 90, 220V, 2 speed Maxx 90, air Maxx 90, 220V, 2 speed, with wheel lift Maxx 90, air, with wheel lift Maxx 80, 220V Maxx 80, 220V, 2 speed Maxx 80, 110V Maxx 80, Air Maxx 80, 220V, with wheel lift Maxx 80, 220V, 2 speed, with wheel lift Maxx 80, 110V, with wheel lift Maxx 80, Air, with wheel lift Maxx 70, 220V Maxx 70, 220V, 2 speed Maxx 70, 110V Maxx 70, Air Maxx 70, 220V, with wheel lift Maxx 70, 220V, 2 speed, with wheel lift Maxx 70, 110V, with wheel lift Maxx 70, Air, with wheel lift Maxx 70, 220V Maxx 70, 220V, 2 speed Maxx 70, 110V Maxx 70, Air Maxx 70, 220V, with wheel lift Maxx 70, 220V, 2 speed, with wheel lift Maxx 70, 110V, with wheel lift Maxx 70, Air, with wheel lift Maxx 50, 110V Maxx 50, air Maxx 50, 110V, with wheel lift Maxx 50, air, with wheel lift Maxx 80 Maxx 90 Maxx 50 Maxx 70 MOST POPULAR MODEL 292 M

293 SERVICE EQUIPMENT COATS TIRE CHANGERS CENTER CLAMP TIRE CHANGERS • Center-clamp tire changer designed for quick operation while minimizing wheel damage and metal-to-metal contact • The levererless bead lifter lifts the tire bead without the use of a tire bar, so changing tires is faster and easier with less risk for rim damage • Comes with RoboRoller and Robo-Arm helper devices that assist with changing low profiles and runflat tires • Comes with the Auxiliary Bead Seater system • Clamping range from 10"-30" RC- SERIES TIRE CHANGERS RC-55 443-00090 • RC 55 is a rim clamping tire changer with swing arm helper systems that give techs an extra assist when changing run flats and low profiles. Comes with the Coats Robo-Arm to help your technicians deal efficiently and effectively with low-profile and run flat tires that have become common with OEM fitments. 443-00055 RC-45 • RC 45 is a rim clamping tire changer with a swing arm and duckhead mount/ demount tool that helps techs change OEM fitments. Designed and built in the USA, RC 45 Tire Changers operate with the same proven durability and processes technicians already trust—delivered in a compact, 110V design that’s engineered to fit seamlessly into your shop. 443-00080 443-00045 Ascot No. 443-00090 443-10090 443-00080 443-10080 Model MFG No. Ascot No. 90C, 220V 80090CEH220 90C, Air 80090CAH3 80C, 220V 80080CEH220 80C, Air 80080CAH3 Model Elec. 110v 443-00055 RC-55,110V 85609950 443-10055 RC-55,air 8560995001 443-00045 RC-45,110V 85609949 443-10045 RC 45, Air 8560994901

SERVICE EQUIPMENT COATS TIRE CHANGERS TILT-BACK CHANGER • The APS 3000 handles low profile and run flat tires easily with its Robo-Arm © and leverless duckhead bead lifter. The patented SmartLock System clamps the wheel in the center and minimizes the risk of rim damage. Accomodates 12"-34" wheels and up to 16" tire width. 294 ASCOT NO. MFG. NO. 443-03000 DESCRIPTION 800APS3000 leverless Tilt-Back Tir 443-03000 9028 TIRE CHANGER • This extended capacity, tilt back tire changer gives your shop the powerful capabilities it needs to take on the toughest tire service challenges with minimal effort. Accomodates 10"-28" wheels and up to 14" tire width. STORAGE CABINET FOR RIM CLAMP TIRE CHANGERS • Universal- Easily attaches to most swing arm rim clamp tire changers • Two gear clamps for attaching to tower included • 14” W x 23” H x 8.5” D • Black Powder coat finish • Lube bottle bracket (not pictured) on side • Made In USA 443-09028 719-82222 ASCOT NO. MFG. NO. 443-09028 DESCRIPTION CTC 9028 9028 Tire Changer ASCOT NO. MFG. NO. 719-82222 DESCRIPTION TOOTCCAB Storage Cabinet for Rim Clamp Tire Changers

295 SERVICE EQUIPMENT COATS SERVICE EQUIPMENT IDENTIFY VEHICLE BODY DAMAGE VEHICLE DAMAGE DETECTOR • High-definition cameras capture the state of the vehicle’s exterior • Uses automatic numberplate recognition technology to read vehicle registration plates and personalize the inspection report X & C SERIES WHEEL LIFT • Helps your techs elevate heavy wheel assemblies up to tabletop height with minimal effort • Compatible with X series an Center Clamp model tire changers 443-08609 443-52021 ASCOT NO. MFG. NO. 443-08609 DESCRIPTION 85608609 X & C Series Wheel Lift TREAD DEPTH SCANNER • LED, 3D technology and high-resolution cameras provide data on tread wear so you can know the condition of your customers’ tires as they drive in your shop, with no labor required • Flush-mount option shown. ASCOT NO. MFG. NO. 443-52021 DESCRIPTION CTC5200021 GRIP MAX 2.0 CLAMPS One-piece dual-compound clamps with increased surface area and improved jaw profile for maximum grip on X and Maxx Series changers. TREAD DEPTH SCANNER IN ACTION Vehicle Damage Detector 443-00000 443-12106 ASCOT NO. MFG. NO. 443-00000 CTC EFTC AUXILIARY BEAD SYSTEM (ABS) • Auxiliary Bead System (ABS) that taps into the surge tank to help seat stiff beads on a wide range of tire assemblies. 443-06545 Tread Depth Scanner DESCRIPTION ASCOT NO. MFG. NO. 443-12106 DESCRIPTION 85612106 Grip Max 2.0 Clamps ASCOT NO. MFG. NO. 443-06545 DESCRIPTION 85606545 Auxiliary Bead System (ABS)

SERVICE EQUIPMENT CEMB TIRE CHANGERS SM628BPS ADVANCED SWING ARM TIRE CHANGER WITH BEAD PRESS SYSTEM • Quick-change steel mount head with plastic protectors and polymer mounting head • Selfcentering, dual clamping cylinder heavy duty turntable • Clamp up to 28" diameter rims and tires up to 44" diameter • Heavy-duty 220V, 1Ph phase inverter, constant torque two-speed (8-15rpm) • High-Performance BPS (Bead Press System) for simple servicing of stiff side wall tires • Press cone kit allows simple push down external rim clamping • Lower bead roller demounts tires without using the mounting head • Adjustable two-way high-power bead breaker side-shovel with protector sleeve • Two stage tire inflation • Jaw-placed jets and tire inflator includes accumulator safety limiter SM645HPA PERFORMANCE TILT BACK TIRE CHANGER WITH HPA BEAD PRESS • Automatic tilt-back mount-demount arm re-positions for next wheel without adjustments • Heavy-duty 110V motor with high torque, handles the difficult sidewall tires and deep drop center rims • Bead breaker shovel: Adjustable to the correct angle to fit diameter and width of tire • Two-stage tire bead sealing inflation jets • Tire inflator includes safety limiter • HPA two-sided press arm system is a must have for simple servicing of stiff sidewall tires and deep drop center rims • Includes press arm, press follower and two tire lifter discs • Optional polymer mount head kit SM825 SWING ARM PASSENGER & LIGHT TRUCK TIRE CHANGER • Air tank in tower • Dual clamping cylinders • Semi-automatic swing arm • Inflator jets on each clamp • Inserts protect aluminum wheels • Adjustable bead breaker • Clamping from 10" - 24" rims and tires up to 44" • Available with or without bead press arm • Available with air or electric drive motot, 110V 1PH 296 SWING ARM AIR TANK IN TOWER HEAVY DUTY TURNTABLE 443-91825 443-62801 443-64501 CEMB TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-62801 443-64501 443-91825 MFG. NO. SM628BPS SM645HPA SM825 POWER SUPPLY 220VAC 110VAC 110 VAC CLAMPING 14" - 27" 14" - 26" 15" - 26" OUTSIDE CLAMPING 11" - 24" 12" - 24" 13" - 24" MAX TIRE OUTSIDE 44" 47" 47" BEAD BREAKER FORCE 6393 lb. 6790 lb. 5500 lb. MAX RIM WIDTH 15.5" 13.5" 15" GROSS SHIPPING WEIGHT 630 lb. 1050 lb. 630 lb.

297 SERVICE EQUIPMENT CEMB-USA PROFESSIONAL LEVERLESS TIRE CHANGERS TORUK LEVERLESS TIRE CHANGER The TORUK can handle the toughest rim and wheel combinations up to 30” for cars, SUV’s and light trucks. The patented Dynamic Tool Head provides contact-free mounting and demounting with unmatched rim protection. Ergonomic designed control console and built-in wheel lift increase tire changing speed and ease of operator use. KEY FEATURES • Patented Dynamic Tool Head with front and rear levers • Automatic Center • Post positioning to Tool Heads • Variable-Speed, 0–16 rpms motor for exact control • Intuitive multifunctional control console for easy operation • Built-in front loading wheel lift • Laser Pointer to position Dual-Roller Bead Breaking arms • 230V / 1PH 50/60Hz, 120-145 PSI SMX70LL LEVERLESS TIRE CHANGER The SMX70LL Tilt-Back Leverless tire changer is designed to change High-Performance, Run-Flats and most tires on cars and light trucks in high-volume tire shops and repair garages. KEY FEATURES • Variable-Speed Turn Table, 0-16 rpms • Opposed-Jam adjustable clamping range, 12”– 26”• Leverless Demount Head handles the toughest wheels • Tilt-Back Tower designed to reduce flexing of Tool Head • Integrated Bead Seating Jets built into clamping jaws. • 230V / 1PH 50/60Hz 120–145 PSI • Max. Wheel Diameter:46” / 1170mm • Max. Wheel Width: 16” / 406mm ASCOT NO. MFG. NO. Toruk 443-00060 DESCRIPTION Toruk Leverless Tire Changer ASCOT NO. MFG. NO. 443-00070 DESCRIPTION SMX70LL SMX70LL Leverless Tire Changer

SERVICE EQUIPMENT CORGHI TIRE CHANGERS A9222 SWING ARM TIRE CHANGER • Turntable with two pneumatic cylinders capable of clamping any types of rim securely • Extractable pedal controls for easy inspection of control area • User-friendliness, reliability, and high performance make this a versatile tool at an extremely competitive price • For passenger and light trucks *Shown with optional helper BPT arm A9824 2-SPEED SWING ARM TIRE CHANGER • Built for high volume shops at an affordable price • Designed to handle passenger, light truck and motorcycle wheels *Shown with optional helper BPT arm UNIQUE MOUNT/ DEMOUNT HEAD HEAVY DUTY TURNTABLE A9830 2- SPEED SWING ARM TIRE CHANGER • Built for high volume shops at an affordable price • Hand operated bead breaker • Built in wheel lift available • Expandable to 30" outside clamping with adapters• Designed to handle passenger, light truck and motorcycle wheels *Shown with optional helper BPT arm 298 443-01764 443-92220 443-19004 CORGHI TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-92220 443-01764 443-19004 MFG. NO. A9222 A9824 A9830 POWER SUPPLY 110V/50-60hz 115V/50-60hz 115V/50-60hz CLAMPING 13"-25" 12"-26" 12"-28" OUTSIDE CLAMPING 10"-22" 10"-24" 10"-26" MAX TIRE OUTSIDE 42" 47" 47" MAX RIM WIDTH 3.5"-12.5" 26" 28" GROSS SHIPPING WEIGHT 760 lb. 600 lb. 635 lb.

299 SERVICE EQUIPMENT CORGHI TIRE CHANGERS A20241TI 2-SPEED TILT BACK TIRE CHANGER • Ideal for all OEM and aftermarket wheels • Preferred market choice for reliablity and long lasting performance A2030 2-SPEED TILT BACK TIRE CHANGER • Ideal for all OEM and aftermarket wheels • Preferred market choice for reliablity and long lasting performance STURDY TILT-BACK TOWER BUILT-IN BEAD BREAKER SHOVEL 443-18134 443-01274 Customize your machine with 1 or 2 of Corghi's 4 Helper Arms BPT (Bead Pressing Tool) 8-11120032 PU1500 Left Side 8-11120046 CORGHI TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-01274 443-18134 MFG. NO. A2024TI A2030 POWER SUPPLY 110V/50-60hz 110V/50-60hz CLAMPING 12"-26" 12"-28" OUTSIDE CLAMPING 10"-24" 10"-26" MAX TIRE OUTSIDE 40" 43" MAX RIM WIDTH 26" 28" GROSS SHIPPING WEIGHT 600 lb. 620 lb. SP2000 Right Side 8-11120047 SP2300 8-11120042

SERVICE EQUIPMENT COATS TIRE CHANGERS AM50 LEVERLESS TIRE CHANGER • Leverless design allows it to easily handle the toughest tire and wheel combinations in the market today • Dynamic bead breaking discs & newly designed head group provides fast & smooth operation AM500 AUTOMATIC TIRE CHANGER • Leverless design allows it to easily handle the toughest tire and wheel combinations in the market today • Dynamic bead breaking discs & newly designed head group provides fast & smooth operation AM5000 TIRE CHANGER • The Touchless system keeps the working tools away from the wheel making OEM, Low Profile, and Run Flat tires simple, safe and fast to change • The wheel lift and helper arm are standard TOUCHLESS SYSTEM WHEEL LIFT & HELPER ARM 300 443-18834 443-08234 "LEVA LA LEVA" (WITHOUT LEVER) Corghi Tire Changer Video CORGHI TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-05034 443-08234 443-18834 MFG. NO. AM50 AM500 AM5000 POWER SUPPLY 110V/50-60hz 110V/50-60hz 110V/50-60hz CLAMPING 12" 12" 13" OUTSIDE CLAMPING 30" 32" 28" MAX TIRE OUTSIDE 47" 47" 47" MAX RIM WIDTH 15" 15" 15" GROSS SHIPPING WEIGHT 760 lb. 980 lb. 1290 lb.

301 SERVICE EQUIPMENT COATS TIRE CHANGERS AM26J ARTIGLIO MASTER TIRE CHANGER • The Touchless system keeps the working tools away from the wheel preventing contact with the rim • Keeps Low profile, and run flat tires simple, safe and fast to change • The wheel lift and helper arm are standard • Dual bead breaker • Bead depressor • Small footprint AM28 ARTIGLIO MASTER TIRE CHANGER • The Touchless system keeps the working tools away from the wheel preventing contact with the rim - New demounting tool head • Dynamic bead breaking device • Rapid demounting procedure • Universal wheel clamping system • Wheel lifter to effortlessly place wheels onto turntable ARTIGLIO MASTER CODE TIRE CHANGER • The Touchless system keeps the working tools away from the wheel preventing contact with the rim • Automatic wheel dimension acquisition enabling automatic tool positioning - Automatic Mode - Touch screen system to guide user through all procedures and solutions ALL WITH TOUCHLESS TECHNOLOGY 443-16235 443-16234 443-08514 CORGHI TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-08514 443-16234 443-16235 MFG. NO. Mastercode AM26J AM28 POWER SUPPLY 110V/50-60hz 110V/50-60hz 230V/50-60 Hz CLAMPING 13" 12" 13" OUTSIDE CLAMPING 32" 26" 28" MAX TIRE OUTSIDE 47" 40" 43" MAX RIM WIDTH 16" 14" 16" GROSS SHIPPING WEIGHT 1,675 lb. 1080 lb. 970 lb.

SERVICE EQUIPMENT BLUE HUB & RIM TAPE ROLL - 1.95" X 325' • Made from polyethylene material & offers reliable defense against scratches and damage during tire installation or road use, preserving your wheel rims original condition and appearance • Provides dependable wear resistance and longevity • Features a high-adhesion backing that allows for quick and secure application on car or motorcycle wheel rims without leaving residue • Blue-colored rim protector tape adds a visually appealing while serving as a functional barrier against scratches and abrasions on your cars wheel rims TIRE CHANGER ACCESSORIES 23.6" BEAD LIFTING TOOL W/ ENHANCED GRIP • Enhanced angle that allows a more efficient grip of the tire without letting it escape • Made of steel • Avoids scratching aluminum rims • Decreases the possibility of breaking a bead • Deep grooves to provide extra grip and avoid slippage • 23.6” overall length 444-23614 302 444-02583 ASCOT NO. MFG. NO. 444-23614 ASCOT NO. MFG. NO. 444-02583 DESCRIPTION ASBHRT Blue Hub & Rim Tape Roll - 1.95" x 325' TIRE CHANGER LUBE BOTTLES AND SWABS RIM CLAMP BEAD LIFTING TOOL • Designed for ease of lifting the bead during the tire changing operation • 20" overall length • Made from a durable chrome-vanadium material DESCRIPTION AS-23614 23.6" Bead Lifting Tool w/ Enhanced Grip 444-81354 ASCOT NO. MFG. NO. 444-81354 DESCRIPTION TC181354 Rim Clamp Bead Lifting Tool 844-16572 LONG SOCK FOR BEAD LIFTING TOOL • High quality plastic sleeve prevents the rims from scratching while lifting the bead • Made from high qualit durable nylon • Ribbed design for anti-slip contact 444-22019 ASCOT NO. MFG. NO. DESCRIPTION 444-22019 220019 Long Sock for Bead Lifting Tool - 4 Pack 844-16572 106572 ASCOT NO. MFG. NO. DESCRIPTION 437-00001 437-00002 437-00003 844-16259 TS-1 TS-2 TS-3 844-16259 11" OAL x 2" Swab Diameter 15" OAL x 2" Swab Diameter 18" OAL x 3" Swab Diameter 106259 Lube Bottle. Rim Clamp® . Fits RC-15, RC-20, 5060 and 5070 Series Tire Changers Lube Bottle. Center-Post. Fits 4040, 4040SA and 4050 Tire Changers 437-00001 437-00002 437-00003

303 SERVICE EQUIPMENT TIRE CHANGER ACCESSORIES GRIP MAX 2.0 EXTENDED CLAMPS • Extended clamps to provide external clamping range from 16” up to 30” for X and Maxx Series tire changers ASCOT NO. MFG. NO. 443-07986 DESCRIPTION 85607986 Grip Max 2.0 Extended Clamps 443-07986 GRIP MAX 2.0 REBUILD KIT • The Grip Max 2.0 Replacement Grip Set includes 4 grips ASCOT NO. MFG. NO. 443-11034 DESCRIPTION 85611034 Grip Max 2.0 Rebuild Kit 443-11034 STEEL 3-POSITION CLAMPS • Provide an external • Clamping range of 6” up to 24” • Fits all X, Maxx, RC and GTS Series tire changers ASCOT NO. MFG. NO. 443-84926 8184926 DESCRIPTION Steel 3-Position Clamps 443-84926 QUILTED CLAMP SOCKS (10) 443-83604 ASCOT NO. MFG. NO. 443-83604 8183604 DESCRIPTION Quilted Clamp Socks (10) RC200 STYLE MOTORCYCLE CLAMPS (4) • Motorcycle Clamps – For Automotive X Model Rim Clamp Tire Changers • (Clamps Insert Qty 1: 8183248) 443-83604 ASCOT NO. MFG. NO. 443-83604 DESCRIPTION 81845744 RC200 Style Motorcycle Clamps (4)

SERVICE EQUIPMENT TIRE CHANGER ACCESSORIES CORGHI 'WING' MOUNT/DEMOUNT HEAD For Select Corghi & Hunter Tire Changers • Molded wing guides the tire bead into the drop center • Prevents the tire from moving above the knuckle • Faster and easier mounting process NYLON MOUNT/DEMOUNT HEAD FOR COATS, CORGHI & HUNTER TIRE CHANGERS 444-01222 444-01226 ASCOT NO. MFG. NO. 444-01226 DESCRIPTION 4-120129B 'Wing' Mount/Demount Head 444-01230 NYLON MOUNT/ DEMOUNT HEAD ONLY Replacement For Accuturn 20024335 • Use With Models 7700, 8910, 8911, 8922, 8944, and 8989 • Replacement For Hofmann 20024335 • Replacement For FMC/John Bean EAA 24335 • For Use On EHP Series Tire Changers • Replacement For Snap-On 24335. For Use On All Models • Head Only OEM All Tool Coats Corghi Giuliano Part Number Tire Changer All models RC1, 5, 10, 15, 20 Early 5060, 9010, 9024, APX90 All rim clamp (optional accessory) 3008403 Hofmann 8314813 Hunter Sice 8314813 ASCOT NO. MFG. NO. 444-01222 RP11-8314813 Shaft must be turned 180° for this head to work All earlier models except 1550, 1620, 1625 TCX Series (RP11-5-400-100 Adapter required) TCX500 Requires Upgrade Shaft & Adapter Kit M39, S40, S41, S42, S43, S45, S408MAXI, S435, S436, S436TOP DESCRIPTION TC450310 Nylon Mount/Demount Head for Coats, Corghi & Hunter Tire Changers 304 G3008403 83008403 450310 RED PLASTIC HUNTER MOUNT/DEMOUNT HEAD Larger channel for difficult wheels • Specifically designed for low profile tires for Hunter TCA34 tire changers • Application chart below: ASCOT NO. MFG. NO. 444-01228 DESCRIPTION TC20024335 Nylon Mount/Demount Head Only NYLON TOOL HEAD FOR HUNTER TIRE CHANGERS Replacement For Hunter RP6-710014120 • For Use On TCA34 With Serial Number 664 And Above • Tool Head For Hunter TCA34 Tire Changers 444-01228 CHANNEL 444-01224 OEM Hunter Part Number Tire Changer 221-675-2 221-675-2-B ASCOT NO. MFG. NO. 444-01230 DESCRIPTION TC14120 Nylon Tool Head for Hunter Tire Changers ASCOT NO. MFG. NO. 444-01224 TC250, TC300, TC325, TC350, TC2000, TC3250, TC3500 TC250, TC300, TC325, TC350, TC2000, TC3250, TC3500 DESCRIPTION TCR343 Red Plastic Hunter Mount/Demount Head

305 SERVICE EQUIPMENT TIRE CHANGER ACCESSORIES NYLON MOUNT/DEMOUNT HEAD, COATS & HUNTER STYLES GREY NYLON DUCKHEAD • Grey nylon mount/demount head kit for low profile tires • Use with difficult wheels • Compatible with the Coats tire changers: 5030, 5040, 5050, 5060, 5065, 6050, 6060, 6065, 7050, 7055, 7060, 7065, 7655, 7660, 7665 444-01220 444-01221 ASCOT NO. MFG. NO. 444-01220 444-01221 DESCRIPTION TC183061-A VT-1221 Nylon Mount/Demount Head (Coats Style) Nylon Mount/Demount Head (Hunter Style) STAINLESS STEEL DUCKHEAD FOR COATS TIRE CHANGERS • Tapered stainless steel mount/demount head used on many Coats tire changers • For steel wheels and high-volume shops dealing mostly with OEM passenger cars and light trucks • Found on Coats ModelS: 5030, 5040, 5045, 5050, 5060, 5065, 5070, 6050, 6060, 6065, 7050, 7055, 7060, 7065, 7655, 7660, 7665, 70XEH1, 70XEH2, 70XEH3 • Includes the set screws for adjusting the angle ASCOT NO. MFG. NO. 444-01223 DESCRIPTION TC184432 Grey Nylon Duckhead Kit for Coats Tire Changers PLASTIC RIM PROTECTORS FOR COATS STAINLESS STEEL MOUNT/DEMOUNT HEADS • Designed for COATS stainless steel mount/demount heads • Made from a durable plastic material to prevent marring or scratching • Available in packs of 2 or 12 444-01225 2961, 2963 ASCOT NO. MFG. NO. 444-01225 DESCRIPTION ASCOT NO. MFG. NO. 444-82961 TC182788 Stainless Steel Duckhead for Coats Tire Changers 444-82963 TI182963 12-Pack of Plastic Rim Protectors for Coats Stainless Steel Mount/Demount Head TI182961 2-Pack of Plastic Rim Protectors for Coats Stainless Steel Mount/Demount Head DESCRIPTION

SERVICE EQUIPMENT CEMB HEAVY DUTY TIRE CHANGERS CM27T HEAVY DUTY TRUCK TIRE CHANGER • For tube and tubeless type tires used on over-the-road Class 8 commercial trucks and some off-road tractor tires and rims • The pivoting four-jaw clamping chuck aids as a wheel lift and prevents liabilities of manual truck tire changing by allowing the machine to perform all the heavy lifting and service work • Mobile cable control unit • Bi-directional rotation • Self centering universal wheel chuck • Rim pliers and rim lever standard SM56T HEAVY DUTY TIRE CHANGER • For tube and tubeless tires used on heavier off-road farm and commercial use tractors • Mobile cable control unit • Two speed hydraulic pump motor • Bi-directional rotation • Self centering universal wheel chuck • Self-centering four jaw clamping jaw drive system which doubles as a wheel lift • Rim pliers and rim lever standard 306 446-00027 CEMB HEAVY DUTY TIRE CHANGER SPECIFICATIONS ASCOT NO. 446-00027 446-00056 MFG. NO. CM27T SM56T POWER SUPPLY 220 VAC 220 VAC CHD TIRE CHANGERS • Most compact of the jaw-style clamping machines available • Easy-to-learn and designed for moderate to high volume shops • Fast & easy clamping of virtually all rim styles • Floating jaws match wheel contours for excellent grip and safety • Solid, single-piece frame for added capacity and reliability • Portable wired control unit allows best angle at all times • Handles rims from 13” to 27” & tires up to 63” in diameter and 30.5” wide • CHD Series also includes models 9041 and 9551 for varying shop needs ASCOT NO. MFG. NO. 443-63301 443-63303 443-09041 443-09551 DESCRIPTION CTC CHD63301PH CTC CHD6330 CTC CHD9041 CTC CHD9551 6330 - 1 Phase Tire Changer 6330 - 3 Phase Tire Changer 9041 Tire Changer 9551 Tire Changer 443-63303 RIM CLAMPING RANGE 13" - 27" 14" - 46" MAX TIRE OUTSIDE 63" 90.5" MAX TIRE WIDTH 30" 42" MAX TIRE WEIGHT 3300 lbs. 3300 lbs. BEAD BREAKER FORCE 4100 lbs. 6000 lbs. SHIPPING WEIGHT 1415 lbs. 2000 lbs.

307 SERVICE EQUIPMENT CORGHI HEAVY DUTY TIRE CHANGERS HD700 HEAVY DUTY TIRE CHANGER • For demounting and mounting inner tube and tubeless type tires for trucks, buses and industrial vehicles with annular groove or elastic ring type rims • Can be used to work easily on any rim size up to 26" HD1300 HEAVY DUTY TIRE CHANGER • Extremely compact dimensions for working with complete peace of mind on truck, agricultural machine and earth moving machine wheels • Features a sturdy and robust operated tool arm HD1300R HEAVY DUTY TIRE CHANGER (WIRELESS) • Extremely compact dimensions for working with complete peace of mind on truck, agricultural machine and earth moving machine wheels • Features a sturdy and robust operated tool arm FOR INNER TUBE & TUBELESS TYPE TIRES WIRELESS ANY RIM SIZE UP 443-03504 443-01804 443-03514 CORGHI TIRE CHANGER SPECIFICATIONS ASCOT NO. 443-01804 443-03504 443-03514 MFG. NO. HD700 HD1300 HD1300R POWER SUPPLY 208 vac +/-10%,3 ph., 30 amp circuit 208 vac +/-10%,3 ph., 30 amp circuit 208 vac +/-10%,3 ph., 30 amp circuit MAX TIRE OUTSIDE 63" 86" 86" MAX RIM WIDTH 26" 56" 56" GROSS SHIPPING WEIGHT 1500 lb. 2450 lb. 2450 lb.

SERVICE EQUIPMENT CORGHI HEAVY DUTY TIRE CHANGERS MONSTERAGTT HEAVY DUTY TIRE CHANGER HD1400 HEAVY DUTY TIRE CHANGER • Semi-automatic tire changer • Optional Radio Kit for Wireless Operation Available • Capable of handling tire widths of up to 58" and a maximum wheel w 4189 lb. • Electric-hydraulic oper • Features the START & S guaranteeing notable ener while the machine is no • Significant reduction in strain • Semiautomatic functions • Features bead stress reduction function when curling demount finger• High protection of rims and tires • High performance • Maximum safety • Reliable universal application HD1800 HEAVY DUTY TIRE CHANGER • World's largest and strongest • Works on mining, forestry and agricultural wheels and tires up to 118" and 6,600 lb. • Cordless ontrol • Automatic tool head 308 HEAVY DUTY START & STOP FUNCTION MAXIMUM SAFETY 443-01504 ELECTRICHYDRAULIC OPERATION RIM & TIRE PROTECTION RIM & TIRE PROTECTION HEAVY DUTY CORDLESS REMOTE 443-00409 443-04002 CORGHI TIRE CHANGER SPECIFICATIONS ASCOT NO. 443-00409 443-04002 443-01504 MFG. NO. HD1400 HD1800 MonsterAGTT POWER SUPPLY MAX TIRE OUTSIDE 208 vac +/-10%,3 ph., 30 amp circuit 208 vac +/-10%,3 ph., 30 amp circuit 208 vac +/-10%,3 ph., 30 amp circuit 98.5" 118" 98" MAX RIM WIDTH 58" 50" 58" GROSS SHIPPING WEIGHT 2960 lb. 5350 lb. 3500 lb.

309 SERVICE EQUIPMENT COATS WHEEL BALANCERS DIRECT DRIVE WHEEL BALANCERS 1600 • Enhanced Laser Guided Operation® • Stop, Lock & Index • ProBalance Technology® • Touchscreen • Speed Thread™ • LED barrel lighting • Language software - English, Spanish, French, Chinese • Hood damper 1500 • Laser-Guided Operation • 5 O'Clock Tape Application • 12 O'Clock Clip Application • Automatic 3-D Data Entry • Stop and Lock Inverter Technology • Double-Sided Collets Included 1300 • Powered by Direct Drive – No More Need for Daily Calibration • Static-On-Screen® Display Identifies Any Excess Residual Static Imbalance • Automatic 2-D Data Entry on Wheel Diameter and Offset Measurement 481-01500 481-01600 481-01300 Ascot No. 481-01600 481-01500 481-01300 Model 1600 1500 1300 220V, 1P CTC 16003DA CTC 15003DA CTC 13002DA 220V, 3P CTC 16003DB CTC 15003DB CTC 13002DB

SERVICE EQUIPMENT COATS WHEEL BALANCERS COATS RC BALANCERS RC Balancers incorporates feedback fr U.S technicians that are easy to learn and use for day to day balancing. They are made for durability and reliability, with a touch panel that holds up to repetitive use in any shop environmen Both the RC 450 and 550 always show any residual static unbalance to serve as a final quality check. It gives techs an opportunity to fix the static unbalance and give customers a smooth ride. ASCOT NO. 481-00450 481-00550 MODEL DESCRIPTION RC 450 Coats RC 450 B RC 550 Coats RC 550 Balancer 481-00450 525 WHEEL LIFT FOR DIRECT DRIVE BALANCERS - 1300/1500/1600 • The Coats® 525 Wheel Lift reduces operator fatigue and the potential for expensive wheel damage, while providing a sliding platform for easy operation and smooth, air powered scissor lift action PROBALANCE E900 DIAGNOSTIC WHEEL BALANCER KIT • High-performing direct drive diagnostic wheel balancer featuring ProMatch runout diagnostics and a 10-year direct drive motor warranty • In combination with direct drive technology, ProMatch Technology and a diagnostic roller are used to measure and address vibrations from wheel assembly shape • ProMatch guides techs through a simple process to identify and reduce correctable runout. The result is a smoother ride and fewercustomer returns for rework • Our Kit comes with the Auto Down 525 Wheel Lift and Adjustable Three Piece Pin Plate Set 310 ASCOT NO. MFG. NO. 483-00525 DESCRIPTION CTC800525 Wheel Lift for Direct Drive Balancers ASCOT NO. MFG. NO. 481-80900 DESCRIPTION 8KE900PROKIT ProBalance E900PROKIT

311 SERVICE EQUIPMENT CEMB DIGITAL WHEEL BALANCERS ER72 DIGITAL WHEEL BALANCER • Professional digital wheel balancer especially designed for tire dealers • Automatic Distance & Diameter Entry with Width Sonar (3D) • Fully automatic Spotter Laser System for best correction possible • Full-time accuracy with Static unbalance always displayed on screen • LED to light the work space inside the rim • New automatic arm to measure automatically diameters up to 30" • Standard locking with Quick Nut • Electromagnetic brake for easy weight placement • Available 110VAC or 220VAC • Wide working space • Direct selection ounces/grams • Optimization program for compensation of rim and tire unbalance • One Button Split & Hidden Weight Program ER75 DIGITAL WHEEL BALANCER • A high volume RFV diagnostic wheel balancer, which comes in two variations, uniquely uses advanced balancing features such as Dynamic AutoAdaptive with One-Plane Balancing and RFV measurement combined with HubMatch • All the best features from CEMB balancers are combined with HubMatch to ensure the assembly is round when rolling on the vehicle • The ER75TD is available with either manual locking or pneumatic locking • One Plane Balancing; Offers a single ideal correction plane, indicating the exact point within the rim where the wheel can be balanced. Minimizing both static and dynamic unbalance, using a single counterweight thus saving time • HubMatch® balancing clocks the RFV high point of the assembly to the vehicle hub before mounting it at the 12 o’clock position. WIDE WORKING SPACE SPACEEZ10 3D DATA ENTRY WHEEL BALANCER • Space-Saver wheel balancer • Exclusive direct weight placement 3D inner data entry arm uses 3D Virtual Sonar and AutoAdaptive enhancement software to provide a faster, higher quality wheel balance service • Eliminates the time and hassle of caliper rim width data entry • Motorized, fast 5-second average cycle time • High quality, robust design, extremely accurate balancing with a simple to use interface • Electro-magnetic brake holds wheel steady for easier weight placement • Handles steel and custom wheels with choice of clip-on, tape weight and hidden spoke modes up to 30” rim diameter • Great for small garages, repair shops or back up to larger machines • 110v, 50/60 Hz. 481-00072 ELECTROMAGNETIC BRAKE 481-00075 ASCOT NO. MFG. NO. 481-00072 ER72 DESCRIPTION ER72 Digital Wheel Balancer ASCOT NO. MFG. NO. 481-00075 ER75 DESCRIPTION ER75 Digital Wheel Balancer ASCOT NO. MFG. NO. 481-00010 EZ10 DESCRIPTION EZ10 3D Data Entry Wheel Balancer 481-00010

SERVICE EQUIPMENT CEMB WHEEL BALANCERS C206 MOBILE HAND SPIN TRUCK WHEEL BALANCER • Mobile Hand Spin Truck Wheel Balancer for cars and light & commercial trucks • C206 balances HD truck and bus tires as well as light truck and car tires • Portable for mobile service when 12VDC available • Automatic Distance & Diameter Entry (2D) • Standard lightweight battery pack for use when power not available • Self-Diagnosis and Self-Calibration • MENUS FOR QUICK SELECTION OF THE FOLLOWING: Inches to millimeters, unbalanced thresholds 0.1 or 0 ounces (1 or 5g) • Direct selection ounces/grams • "Static" program—plus 4 AL programs for PAX, light alloy or special shaped rims • One Button Split & Hidden Weight Program • Direct weight location program (no repositioning of stick-on weights) C330 HEAVY-DUTY WHEEL BALANCER Digital Wheel Balancer designed Commercial Trucks, light- duty trucks, SUV’s and Passenger Cars. 2D data entry of distance and diameter and Sonar device for wheel width. Laser line for correction plane at the 6 o’clock position. Patent moveable balancing shaft increases mounting accuracy. 220V 1Ph /120-145 psi required. 312 481-00330 481-00206 ASCOT NO. MFG. NO. 481-00206 C206 DESCRIPTION Mobile Hand Spin Truck Wheel Balancer ASCOT NO. MFG. NO. 481-00330 C330 DESCRIPTION Mobile Hand Spin Truck Wheel Balancer 6450 HD BALANCER KIT • Powerful 1.5 HP direct drive motor • Shows static & dynamic data & identifies any excess residual static imbalance • 500 lbs. Met Lab / UL approved • Designed for front line, high-volume balancing • LED readouts & Laser weight placement • Auto Data Entry for all three parameters with one touch • Auto indexing automatically moves the wheel to weight positions • Stop and Lock spindle for easy, accurate weight placement • Wheel lift included ASCOT NO. MFG. NO. 481-64503 481-64504 DESCRIPTION TC 64503DLEA CTC 64503DLEB Single Phase Electric Balancer Three Phase Electric Balancer 481-64503

313 SERVICE EQUIPMENT CORGHI WHEEL BALANCERS EM9250 LED DISPLAY WHEEL BALANCER • Compact design • Popular with Mobile and Racing • More programs and features than competitive LED display units • Standard Laser/ LED kit for precision weight placement EM9280 MONITOR DISPLAY WHEEL BALANCER • Balancing with monitor, compact and essential with professional performance • LCD MONITOR: High resolution graphics and dedicated software • SMART-ARM: Electronic input of wheel diameter and distance with FSP function which automatically activates the balancing programs, avoiding keypad selection • AWD AUTOMATIC SENSOR (Auto width Device): For contactless measurement of wheel width • Quick and intuitive sensitivity calibration AM9680 WHEEL BALANCER • Top-of-the-range balancing machine for truck wheels • Low balancing speed, optimization of average balancing speed • 7 ALU truck and car programs • Automatic acquisition of wheel/ machine distance • Adhesive weight application device • Stunning userfriendly graphic interface • Automatic wheel weight application position search • Visual wheel wobble inspection • Automatic identification of fitted wheel (truck/car) • OPT FLASH and 200kg lift with safety handle 481-92518 481-92811 481-09682 CORGHI BALANCER SPECIFICATIONS ASCOT NO. 481-09682 481-95218 481-92811 MFG. NO. EM9680 EM9250 EM9280 POWER SUPPLY 110V/220V/50-60hz 110V/50-60hz 110V/50-60hz MAX TIRE OUTSIDE 52" 44" 44" GROSS SHIPPING WEIGHT 562 lb. 350 lb. 380 lb.

SERVICE EQUIPMENT CORGHI WHEEL BALANCERS EM9780-EM9780C CLOSE N' GO 3D WHEEL BALANCER • Larger design • More programs and features than competitive LED display units • Wheel dimension detection with digital gauge • Automatic wheel positioning • LED light to brighten the work area • Quick application of adhesive counterweights • Manual wheel clamping w/quick ring • DISPLAY PANEL: High resolution graphics • AWC (Auto Width Calculation): Reduced wheel data entry time with the AWC function which suggests the most probable DIAGNOSTICS AVAILABLE EM9980C DIAGNOSTIC TOUCHSCREEN WITH RADIAL FORCE VARIATION TOUCHSCREEN MONITOR • Balancing with monitor, compact and essential with professional performance • LCD MONITOR: High resolution graphics and dedicated software • SMART-ARM: Electronic input of wheel diameter and distance with FSP function which automatically activates the balancing programs, avoiding keypad selection • AWD AUTOMATIC SENSOR (Auto Width Device): For contactless measurement of wheel width • Quick and intuitive sensitivity calibration • Sonar included 3D FULL LASER SCAN 314 TOUCHSCREEN MONITOR 443-09557 481-09783 481-09984 CORGHI BALANCER SPECIFICATIONS ASCOT NO. 481-09783 481-09984 MFG. NO. EM9780 EM9980C POWER SUPPLY 110V/50-60hz 110V/50-60hz MAX TIRE OUTSIDE 44" 44" GROSS SHIPPING WEIGHT 440 lb. 440 lb.

315 SERVICE EQUIPMENT CORGHI WHEEL BALANCERS ET1680 TRUCK DIAGNOSTIC WHEEL BALANCER • For HD Trucks, LT/MD, and Passenger cars • Touchscreen monitor • Smart arm data entry (touch and go) • Direct Positioning to set wheel in correct balancing position • Electromagnetic braking • LED/LASER for adhesive weight placement • Integrated wheel lift for wheels up to 661 pounds (300kg!) • Optional sonar sensors for advanced diagnostics including rim, tire, and lateral runouts • BESTFIT software to show best placements on vehicle hubs • FASTMATCHING function automatically calculates optimal matchmounting between rim and tire • Automotive Cone Kit included. ET66 MOTOR DRIVEN BALANCER • For HD Trucks, LT/MD, and passenger cars • Practical Balancer when space restricted and no need for advanced diagnostic procedures • Bright LED Display • Smart arm data entry, entering distance, diameter, and auto-width calculation (no need for calipers) • LED/Laser for adhesive weight placement • Integrated wheel lift for wheels up to 331 pounds (150kg!) • Balancing Precision to 10g (truck) and 1 gram (car) • Automotive Cone Kit included. HEAVY DUTY COMPACT & EASY TO USE 481-10201 481-01452 CORGHI BALANCER SPECIFICATIONS ASCOT NO. 481-10201 481-01452 MFG. NO. ET1680 ET1450 POWER SUPPLY 110V/50-60hz 110V/50-60hz MAX TIRE OUTSIDE 631 lbs 331 lbs GROSS SHIPPING WEIGHT 28" 28"

SERVICE EQUIPMENT WHEEL BALANCER ACCESSORIES HAWEKA LUG CENTERING SOLUTIONS HAWEKA HUB CENTERING SOLUTIONS 316 483-99409 ASCOT NO. MFG. NO. 483-99409 482-25649 HW200 299 409 U.S. Flange Plate Kit 40mm HW210 400 002 Quick Plate Kit: 40mm Note: Flange Plates and Quick Plates also available in 28, 36, 38mm PROMAX MD 40MM ASCOT NO. MFG. NO. 482-25411 482-26460 482-26462 482-25491 483-40132 483-40014 PRO COLLET 9 KIT 40MM ASCOT NO. MFG. NO. 483-40014 DESCRIPTION HW280 400 139 ProMax MD 40mm DESCRIPTION HW150 400 110 9 Piece Pro Collet Kit HW160 400 060 Ford Precision Collet HW160 400 062 Toyota Precision Collet HW150 400 091 Cone Kit 40mm: Light Truck HW150 400 132 Haweka Pro Centering Kit VII Note: All Hub Centering Products also available in 28, 36, 38mm except Duo Expert 483-40132 N.A. FLANGE PLATE KIT 40MM ASCOT NO. MFG. NO. 483-40110 DESCRIPTION HW150 400 110 Pro Collet 9 Kit 40mm LIGHT TRUCK CONE KIT 40MM • Covers hub ranges 120mm174mm • Kit includes a cone and distance spacer • Works on all balancer makes and models with 40mm shaft ASCOT NO. MFG. NO. 483-99409 DESCRIPTION HW200299409 N.A Flange Plate Kit 40mm 483-40091 ASCOT NO. MFG. NO. 483-40091 DESCRIPTION HW150 400 091 Light Truck Cone Kit 40mm

317 SERVICE EQUIPMENT WHEEL BALANCER ACCESSORIES HAWEKA QUICK NUTS AND PRESSURE CUPS STEEL PROGRIP QUICKNUT WITH HANDLES AND PRESSURE CUP • Essential wheel balancer tooling • Clamping device speeds wheel mounting process on balancers • Heavy duty steel design solution for Road Force balancers 483-24486 ASCOT NO. MFG. NO. 483-24486 483-24433 483-25433 483-25403 483-25406 483-21982 483-29821 483-29827 DESCRIPTION HW124 408 006 Quick Nut Steel w/ Hood 40-8mm HW140 404 033 Quick Nut HD (metal) 40mm-4mm HW140 403 033 Quick Nut - 40mm - 3mm HW143 283 003 Quick Nut - 28mm - 3mm HW143 283 006 Quick Nut w/ Handles - 28mm - 3mm HW190 008 002 Pressure Cup - 5" HW190 008 021 Pressure Cup - 8" HW190 008 027 Quick Nut Pressure Ring Note: Quick Nuts are also availble for 28, 36, 38m 483-40806 483-40806 HW124 408 006 Steel ProGrip QuickNut 40 x 8 with Handles and Pressure Cup SOFTGRIP QUICKNUTS WITH HANDLES HAWEKA SOFT GRIP QUICK NUT - 40 X 8 • Improved design, essential wheel balancer tooling • New ergonomic design with soft-touch handle • New metal alloy threaded jaws last longer • Larger bearing surface allows for higher torque • Pressure ring is always attached to the quick nut (a must for quick plate/ flange plate use) • Optimized glide prevents fast wear of the thread shaft • Redesigned, heavy duty pressure cup • Improved quick action mechanism prevents opening under load • Lower housing height for shorter shafts and larger profile wheels...always grabs the thread • Lighter weight, easier to handle due to lower housing height • Essential wheel balancer tooling • Upgraded threaded jaws with bigger bearing surface allows higher torque pressure • Softgrip clamping device will not open under load • New alloy metal jaws provides longer life for threaded jaws • Torque ring is ever present – removal not required for use with pressure cup • Heavier duty pressure cup • Lower overall housing height enables use with quick or flange plates on shorter shafts 483-40801 483-40800 ASCOT NO. MFG. NO. 483-40800 DESCRIPTION HW125 408 000 Haweka Soft Grip Quick Nut – 40 x 8 ASCOT NO. MFG. NO. 483-40301 483-40401 483-40801 DESCRIPTION HW125 403 001 SoftGrip Quick Nut 40 x 3 with Handles HW125 404 001 SoftGrip Quick Nut 40 x 4 with Handles HW125 408 001 SoftGrip Quick Nut 40 x 8 with Handles

SERVICE EQUIPMENT WHEEL BALANCER ACCESSORIES PROGRIP PRESSURE CUP • Pressure Cup for all ProGrip Quicknuts 40mm, 38mm, 36mm, 28mm • HW143 403 003, HW143 403 006, HW143 383 003, HW143 383 006, HW143 363 003, HW143 363 006, HW143 283 003, HW143 283 006, HW143 404 003, HW143 404 006, HW143 285 006, HW143 405 006, HW140 403 033, HW140 404 033 ASCOT NO. 483-08002 MFG. NO. HW190 008 002 RUBBER COVER FOR 5" PRESSURE CUP • Provides rubberized protection between wheel rim and pressure cup 483-08005 483-08002 DESCRIPTION ProGrip Pressure Cup ASCOT 4.5" PRESSURE CUP FOR HUNTER QUICK RELEASE NUT • Pressure Cup used for proper positioning of Wheel Balancer Cones • Made of high impact nylon • Weight : 1 lb. • 4.5” diameter • Use with 483-16822 rubber ring • Similar to TMRWB1753531 • Made in Taiwan 318 ASCOT NO. MFG. NO. 483-08005 DESCRIPTION 483-53531 HW190 008 005 PRESSURE RING FOR ALL PROGRIP QUICKNUTS • Pressure Ring must be present on ProGrip QuickNuts when using Quick or Flange Plates • Without the pressure ring, the clamping device does not provide enough torque pressure to press rim on cones/collets evenly and consistently eliciting inaccurate balancing results ASCOT NO. MFG. NO. 483-08027 DESCRIPTION HW190 008 027 Pressure Ring for all ProGrip QuickNuts PRESSURE CUP FOR HAWEKA SOFT GRIP QUICK NUTS • Must be used with rubber ring (HW190 008 005) • Works with all Soft Grip Quick Nuts (Not standard quick nuts) • Rigid, heavy duty design prevents flex during balancer spin • Long lasting, hard plastic composition • Snap Connects easily to Soft Grip Quick Nuts 483-08065 ASCOT NO. MFG. NO. 483-08065 DESCRIPTION HW190 008 065 Pressure Cup for Haweka Soft Grip Quick Nuts Ascot No. 483-53921 Mfg. No. ASPC-6 Rubber Cover for 5” Pressure Cup ASCOT NO. MFG. NO. 483-53531 DESCRIPTION ASPC-4.5 4.5" Pressure Cup For Hunter Quick Release Nut ASCOT 6" PRESSURE CUP FOR HUNTER QUICK RELEASE NUT • Pressure Cup used for proper positioning of Wheel Balancer Cones • Made of high impact nylon • Replaces Hunter 175-392-1 • 6” diameter • Use with 483-16572 rubber ring • Similar to TMRWB1753921 • Made in Taiwan 483-53921 Description 6" Pressure Cup For Hunter Quick Release Nut

319 SERVICE EQUIPMENT WHEEL BALANCER ACCESSORIES COATS WHEEL BALANCER ACCESSORIES 483-10908 483-11327 483-09945 483-41821 483-12103 483-07503 483-10104 ASCOT NO. MFG. NO. 483-11327 483-07503 483-10908 483-12103 483-09945 483-09499 483-10104 483-11935 483-41821 483-07817 DESCRIPTION CTC113277C 40mm Balancer Truck Cone Kit Premium Quick Nut Premium Hub Nut Hub Nut 85607503 85610908 8112103 85009945 85609499 8111935 81141821 85607817 Toyota Adapter Kit Double-Sided Collet Kit CTC5610104 40mm Adjustable Pin Plates, 3pc. Set Light Truck Back Cone Spacer Light Truck Back Cone Spacer Premium Quick Nut Repair Kit 483-07817 483-11935 483-09499 10K LOW RISE PAD LIFT • The Coats 10K Pad Lift is our recommended low-rise lift for highvolume bays performing quick services on cars and light trucks. It delivers stable and dependable lifting performance with the durability required to handle the demands of fast-paced bays. Comes with a set of low lifting blocks and medium lifting blocks ASCOT NO. MFG. NO. 304-04101 304-04104 DESCRIPTION 4TPD10SSR1 4TPD10SSR4 10K low rise pad lift - 220V 10K low rise pad lift - 110V 304-04101

SERVICE EQUIPMENT COATS LIFTS 2-POST LIFTS • Coats' 2 Post Lifts raise cars and light trucks of all sizes for techs to complete all under vehicle services • They are compliant with industry safety and operational standards and all 2 post models are ALI-certified • They offer reinforced structural components, premium power units, and corrosion-resistant finishes – all designed to withstand debris and corrosion and minimize maintenance L ASCOT NO. MFG. NO. 304-04210 304-14210 304-04212 304-14212 304-04216 304-14216 304-04220 304-14220 DESCRIPTION 304-04212 CTC 4TV21NSR1 CTC 4TV21NSB1 CTC 4T212SSR1 CTC 4T212SSB1 CTC 4T216SSR1 CTC 4T216SSB1 CTC 4T220SSR1 CTC 4T220SSB1 2-Post Lift - 10k Red 2-Post Lift - 10K Blue 2-Post Lift - 12k Red 2-Post Lift - 12k Blue 2-Post Lift - 16k Red 2-Post Lift - 16k Blue 2-Post Lift - 20k Red 2-Post Lift - 20k Blue 304-04220 ALIGNMENT SCISSOR LIFTS • "Coats Alignment Scissor Lifts are flush mounted or surface mounted drive on lifts that are suitable for 3D wheel alignments and are built to last as long as possible • From the inside out, Coats Alignment Scissor lifts are designed with technologies that keep the runways level and constructed to be one of the most durable scissor lifts you can find • Includes Two Heavy-Duty Rolling Jacks, air kit, two Stainless Steel Turnplates & two Roll Back Bars • Electronic leveling system keeps the lift level for more precise alignments • Non flex runways and double Baked Corrosion Resistant Powder Coat" ALIGNMENT 4-POST LIFTS • "Coats drive on, four post lifts raise cars and light trucks of all sizes so techs can complete all under vehicle services and wheel alignments • They are built to last years with little maintenance needed and come in multiple configurations to fit your shop’s needs • Includes Two HeavyDuty Rolling Jacks, air kit, two Stainless Steel Turnplates & two roll Back Bars • Powered by USA made bucher pump • 26” wide double walled non-flex runways • Double Baked Corrosion Resistant Powder Coat" 320 L 304-00814 304-08419 L ASCOT NO. MFG. NO. 304-00812 304-00814 304-00816 DESCRIPTION 8KSC12KTIP 8KSC14KTIP 8KSC16KTIP Alignment Scissor Lift - 12k Alignment Scissor Lift - 14k Alignment Scissor Lift - 16k ASCOT NO. MFG. NO. 304-08415 304-18415 304-08419 304-18419 DESCRIPTION CTC 8K4P15SKITP CTC 8K4P15XKITP CTC 8K4T419CSAR1 CTC 8K4T419CXAR1 15k Standard Alignment-Open 15k Extended Alignment- Open 19k Standard Alignment- Closed 19k Extended Alignment- Closed A A A D D D N N E N E E D D T D T T V V V A A A I I I D D D A A A

321 SERVICE EQUIPMENT CHALLENGER LIFTS CL10AV3: 10,000 LB. CAPACITY VERSYMETRIC® TWO-POST ADJUSTABLE LIFT • Conventional Power Controls • Adjustable overhead height can now be set at 11’2” (Standard height: 11’8”) • Versymmetric® Plus offset 3-stage front + 3-stage rear arms provide directSPOT™ to vehicle lift points and safely lift both symmetrically and asymmetrically within the same service bay maximizing service capabilities and revenue potential • Padded overhead shut off system prevents vehicle damage from being raised too high. • Oversized 5" diameter pulley and heavy duty 5/16" cable reduces stress on equalization system and increases cable life • Fully gusseted base plate design reduces column deflection and 48" elongated carriage design decreases load on bearing • Single point mechanical lock release system with jacket coated protection and no lock cable pulleys, and double clutch release bar protects cable from stretching while disengaging both column locks simultaneously • 11' 8" standard height with 2' and 3' extensions available allows lift to be placed in standard service bay with 12' ceiling • Rubber door guards provide added security against vehicle door damage SYMMETRIC ONLY Limits car door access on smaller vehicles. ASCOT NO. MFG. NO. 304-00010 DESCRIPTION CL10AV3 CL10AV3 Series: 10,000 lb. Capacity Two-Post Lift NOW WITH ADJUSTABLE HEIGHT 304-00010 ASYMMETRIC ONLY Limits lifting without additional safety aides. Why should you be forced to decide what type of vehicles you service the most? • Symmetric Lifts accommodate 30% of top 20 selling vehicles • Asymmetric Lifts accommodate 70% of top 20 selling vehicles ANY VEHICLE. ONE BAY. With Versymmetric®, both methods are possible from the same bay. CHALLENGER 2-POST LIFT SPECIFICATIONS ASCOT NO. MFG. NO. 304-00010 MAX. CAP. (LB.) OVERALL WIDTH CL10AV3 10,000 11' 6-1/2" to 12' 6-1/2" BETWEEN COLUMNS 110"/116" /122" DRIVE-THRU WIDTH 100"/106" /112" OVERALL HEIGHT Adjustable: 11' 2" Standard: 11' 8" UNDER BAR CLEARANCE FRONT ARM LENGTH 11' 2-1/2" 20" to 42" REAR ARM LENGTH 37.625" to 60" MAX. LIFT HEIGHT 74.125" POWER REG. 2HP, Single Phase, 208V-230V • Versymmetric® Lifts accommodate 100% of the top 20 selling vehicles, properly lifts cars, trucks, vans and SUVs with one lift

SERVICE EQUIPMENT CHALLENGER LIFTS CLFP9: 9,000 LB. CAPACITY FLOOR PLATE LIFT • 10'-7/8" overall column height is ideal for servicing vehicles in a low ceiling height • Low profile drive-over floor plate for easy vehicle positioning • 3-stage front + 3-stage rear arms provide excellent reach and retraction to lift a variety of vehicles • Electric/hydraulic heavyduty chain lifting operation with cable equalization • Dual point mechanical pull-lock cable release system 304-00009 ASCOT NO. MFG. NO. 304-00009 CLFP9 DESCRIPTION 9,000 lb. Capacity Floor Plate Lift 322 SA10: 10,000 LB. CAPACITY TWO-POST LIFT • Challenger’s SA10 2-post lift offers 10,000 lb. capacity • You can install the SA10 in either symmetric or asymmetric setup, depending on your service needs • The SA10 also features adjustable height and width options to further customize it to meet your needs. Innovative 3-stage front and 2-stage rear arms provide greater overall sweep ASCOT NO. MFG. NO. 304-00210 SA10 DESCRIPTION SA10: 10,000 lb. Capacity Two-Post Lift 304-00210 CHALLENGER 2-POST LIFT SPECIFICATIONS ASCOT NO. MFG. NO. MAX. CAP. (LB.) 304-00009 304-00210 CLFP9 SA10 9,000 10,000 OVERALL WIDTH 11' 5-1/2" 129" to 137-1/2" BETWEEN COLUMNS 109" 106-3/4" to 137-1/2" DRIVE-THRU WIDTH 98-3/16" 92-3/4" to 94-1/2" OVERALL HEIGHT N/A 136-1/2" to 142-1/2" UNDER BAR CLEARANCE N/A 131-1/8" to 137-1/8" FRONT ARM LENGTH 24 1/2" to 44-1/2" 22-3/8" to 41-1/2" REAR ARM LENGTH 24-1/2" to 44-1/2" 38-1/4" to 59" MAX. LIFT HEIGHT 79-1/8" 74-1/2" POWER REG. 2HP, Single Phase, 60Hz 2HP, Single Phase, 60Hz

323 SERVICE EQUIPMENT CHALLENGER LIFTS VLE10: 10,000 LB. CAPACITY TWO-POST LIFT • Challenger adds the industry leading Versymmetric® Technology to the popular economy grade 10,000 lb 2-post lift, the LE10 • Expand your service capabilities with the VLE10’s ability to lift a wide range of vehicles • 3-Stage Versymmetric® front arms & 2-Stage rear arms • 11’ 117/8” standard height fits in service bays with 12’ ceiling • Double telescoping screw pads • Jacketed pulley-less single-point mechanical lock release • Rubber door guards protect vehicle door from damage LE12-3S & E15: 12,000 LB. & 15,000 CAPACITY TWO-POST LIFT • Challenger’s LE12-3S and E15 are the perfect economic 2-Post lifts for servicing trucks and other vehicles • Heavy-duty 3-Stage front and rear arms on the LE12-3S and 2-stage front and rear arms on the E15 offer symmetric lifting capabilities • Adjustable column height accommodates higher profile vehicles while providing ample servicing headroom 304-00111 304-00211 CHALLENGER 2-POST LIFT SPECIFICATIONS LIFTING ASCOT NO. MFG. NO. 304-00111 304-00210 304-00211 VLE10 LE12-3S E15 CAPACITY (LBS.) 10,000 12,000 15,000 RISE HEIGHT OVERALL HEIGHT 74 3/4” 6' 5 3/4" 6' 5 3/4" 11' 117/8" or 13' 11" w/ext LE10EH2 13' 10" / 14' 7" 14’ 6” / 16’ 6” OVERALL WIDTH 10' 115/8" 11' 7 3/4" 12’ 31/8” DRIVE THRU CLEARANCE 8' 23/8" 8' 7" FLOOR TO OVERHEAD SWITCH Standard 11' 5" 13' ½" / 14' ½" 9’ 13/8” 13’ 10”/15’ 10” FRONT ARMREACH Min 22 5/16" Max 39 3/8" Min 27 ½" Max 54 ½" Min 36½” Max 55” REAR ARMREACH Min 38 3/8" Max 55 3/8" Min 27 ½" Max 54 ½" Min 36½” Max 55” SCREW PAD HEIGHT Min 4 ¼" Max 6 3/4" Min 5 ¼" Max 6 3/4" Min 5 ¼” Max 6 3/4” REQUIRED CEILING HEIGHT Standard 12' 13' 11" / 14' 8" 14’ 7” / 16’ 7”

SERVICE EQUIPMENT CHALLENGER LIFTS CL12A 12,000 LB. CAPACITY TWO-POST LIFT • With its adjustable width and height feature and 12,000 lbs. capacity, the CL12A can accommodate a variety of vehicles, from compact cars to full-size trucks and commercial vehicles • Spot vehicles faster thanks to its standard 3-Stage Arms and telescoping footpads and service taller vehicles with optional 1’ (# 12702-1) and 2’ (# 12702-2) Column Extensions CL12A-LC: 12,000 LB. CAPACITY TWO-POST LIFT • All the power of our CL12A but can be installed in shops with 12’ ceilings due to a shortened column height of 11’ 11” 324 EV READY EV READY 304-00112 304-00012 Stack Adapters Included CHALLENGER 2-POST LIFT SPECIFICATIONS LIFTING ASCOT NO. MFG. NO. 304-00012 CL12A-LC DESC. Low Ceiling CAPACITY (LBS) LIFTING CONFIG. 12,000 lbs. Symmetric ARM CONFIG. 3-Stage Front & Rear 304-00112 CL12A Standard 12,000 lbs. Symmetric 3- Stage Front & Rear RISE HEIGHT 803/4" OVERALL HEIGHT 11' 11" OVERALL WIDTH Standard 11' 10" +6" - 12' 4" +12" - 12' 10" 84 3/4" 13' 8" or 13' 2" Standard 11' 10" +6" - 12' 4" +12" - 12' 10" DRIVE THRU CLEARANCE Standard - 8’ 7½” +6” - 9’ 1½” +12” - 9’ 7½” Standard - 8’ 7½” +6” - 9’ 1½” +12” - 9’ 7½” FLOOR TO OVERHEAD SWITCH 11' 4 ½" ARM REACH Min. 27 ½" Max 59" 13' 2" or 12' 8" Min. 27 ½" Max 59" SCREW PAD HEIGHT Min. 5” Max. 125/8” (includes 6” stack adapter) Min. 5” Max. 125/8” (includes 6” stack adapter) STANDARD MOTOR/ VOLTAGE 2HP, 208v-230v, 60Hz, 1Ph 60s 12’ RISE TIME MIN. CELING HEIGHT 2HP, 208v-230v, 60Hz, 1Ph 63s 13’ 9” or 13’ 3”

325 SERVICE EQUIPMENT CHALLENGER LIFTS CL16-3S & CL16-2-3S: 16,000 LB. CAPACITY TWO-POST LIFT • This 16,000 lbs. 2-Post Lift boasts optimum flexibility and meets ALI®/ANSI® safety standards • It features adjustable column extensions to accommodate three settings for height and width adjustable from either 13’ 6” to 14’ 6” or add 2’ column extensions to go from 15’ 6” to 16’ 6”, and three width options from 12' 10 3/4", 13' 4 3/4", or 13' 10 3/4" • Standard features include 3-stage front and rear arms and low-profile arm supports for a full swing. CL20 & CL20-2: 20,000 LB. CAPACITY TWO-POST LIFT • Engineered to be wider, taller, and more robust to tackle the heaviest vehicles in your fleet, up to 20,000 lbs. Equipped with 2-Stage arms, this lift also features adjustable column extensions, adjustable width and the ability to add optional 2’ column extensions for taller vehicles. EV READY 304-00163 304-00200 CHALLENGER 2-POST LIFT SPECIFICATIONS ASCOT NO. MFG. NO. 304-00163 CL16-3S DESC. 16K Standard 16K 304-01623 CL16-2-3S Extended Height 304-00200 304-00202 CL20 CL20-2 20K Standard 20K Extended Height 20,000 lbs. 16,000 lbs. 20,000 lbs. LIFTING CAPACITY (LBS.) 16,000 lbs. RISE HEIGHT Min. 751/2” Max. 811/2” Min. 751/2” Max. 811/2” Min. 769/16” Max. 849/16” Min. 769/16” Max. 849/16” OVERALL HEIGHT 13’ 6” 14’ 14’ 6” 15’ 6” 16’ 16’ 6” 13’ 6” 14’ 14’ 6” 15’ 6” 16’ 16’ 6” OVERALL WIDTH 13’ 103/4” 13’ 43/4” 12’ 103/4” 13’ 103/4” 13’ 43/4” 12’ 103/4” 13’ 103/4” 13’ 43/4” 12’ 103/4” 13’ 103/4” 13’ 43/4” 12’ 103/4” DRIVE THRU CLEARANCE 9’ 81/4” 9’ 21/4” 8’ 81/4” 9’ 81/4” 9’ 21/4” 8’ 81/4” 9’ 81/4” 9’ 21/4” 8’ 81/4” 9’ 81/4” 9’ 21/4” 8’ 81/4” FLOOR TO OVERHEAD SWITCH 12’ 11” 13’ 5” 13’ 11” 14’ 11” 15’ 5” 15’ 11” 12’ 11” 13’ 5” 13’ 11” 14’ 11” 15’ 5” 15’ 11” ARM REACH Min. 365/8” Max. 75” SCREW PAD HEIGHT Min. 43/4” Max. 61/2” STANDARD MOTOR/ VOLTAGE 3HP, 208230v, 60Hz, 1Ph Min. 365/8” Max. 75” Min. 43/4” Max. 61/2” 3HP, 208230v, 60Hz, 1Ph Min. 381/2” Max. 62” Min. 381/2” Max. 62” Min. 63/16” Max. 79/16” Min. 63/16” Max. 79/16” 3HP, 208230v, 60Hz, 1Ph 3HP, 208230v, 60Hz, 1Ph MIN. CEILING HEIGHT 13’ 8” 14’ 2” 14’ 8” 15’ 8” 16’ 2” 16’ 8” 13’ 8” 14’ 2” 14’ 8” 15’ 8” 16’ 2” 16’ 8”

SERVICE EQUIPMENT 4P14EFX & 4P14XFX: 14,000 LB. CAPACITY FOUR POST LIFT • The highest rise in the industry provides more working room underneath vehicles • Louvered approach ramps for positive vehicle traction • Oversized solid machined steel pulleys for prolonged pulley and cable life • 14 level locking positions for a variety of general service tasks • ALI/ETL certified • OPTIONAL ACCESSORIES: 7,000 lb. rolling jacks for brake and tire work; Optional bolt on alignment kit converts general service application into alignment rack CHALLENGER LIFTS 4115 SERIES: 15,000 LB. CAPACITY FOUR-POST LIFT 305-41400 ROLLING JACKS • Optional 6,000 lb. and 7,500 lb. capacity rolling jacks allow easy access to brakes and wheels • Available for the 4P14 Series lifts • Air/hydraulic operation • Adjustable width • Low vehicle drive-over clearance • Stackable height extensions with built-in storage rack • Factory installed and protected filter lubricator and regular ASCOT NO. MFG. NO. 218-00060 309-61275 RJ6 RJ7.5 DESCRIPTION Air/Hydraulic Operation, 40 Series and AR40 Series Air/Hydraulic Operation, For 4P14 and 4015 series lifts CHALLENGER 4-POST LIFT SPECIFICATIONS Ascot No. Mfg. No. Description Lifting Capacity Open or Closed Front Overall Length Overall Width Between Columns Height of Runways Width of Runways Width Between Runways Max. Wheel Base Motor/Voltage Required Bay Size W x L 305-41400 305-41401 304-41151 304-41152 304-41153 304-41154 304-41155 304-41156 304-41157 304-41158 4P14EFX 4P14XFX 4115EFO 4115XFO 4115EFX 4115XFX AR4115EAO AR4115XAO AR4115EAX AR4115XAX Standard Extended Standard 14,000 lbs. Closed 245.75” 196" 7.25" 20" 40"/43" 182.5" 210" 183" 210.5" 12’ x 24’ 12’ x 26’ 14' x 24' 14' x 26' 183" 14' x 24' 210.5" 2HP, 208v-230v, 60Hz, 1Ph 14' x 26' 14' x 24' 14' x 26' 14' x 24' 14' x 26' Closed 273.25” 250.75" 130.75" 223.5" 195" 222.5" 196" 223.375" 7" 26" 40.625" 183" 210.5" 183" 210.5" Open 277" Closed 247.625" 275.5" 250.5" 142" 195" 222.5" 196" 223.375" Extended Length Standard Extended Length Standard, 15,000 lbs. Open 277" Closed 247.625" 275.5" Extended Length Standard Extended Length 218-00060 HIGHEST RISE IN THE INDUSTRY Designed with productivity and safety in mind with an all-enclosed front column and crossbeam design. The 26” wide runways allow you to service or align a wide range of vehicles like small passenger cars, medium-duty trucks, and mediumsized vans, up to 15,000 lbs. Align vehicles from 183” to 210” in wheelbase. Open or closed front models available. 4115EFO - Standard, Open-Front, Flat Package 4115XFO - Extended Length, Open-Front, Flat Package 4115EFX - Standard, Closed-Front, Flat Package 4115XFX - Extended Length, Closed-Front, Flat Package AR4115EAO - Standard, Open-Front, Alignment Package AR4115XAO - Extended Length, Open-Front, Alignment Package AR4115EAX - Standard, Closed-Front, Alignment Package AR4115XAX - Extended, Closed-Front, Alignment Package 326 GALVANIZED COATING UPGRADE This will upgrade the runways, jack rails, turn plate pockets & slip plate pockets to a galvanized coating to greatly extend the life of your 4115 Lift.

327 SERVICE EQUIPMENT CHALLENGER LIFTS EV1020: 10,000 LB. CAPACITY INGROUND LIFT • Offset 3-stage front and rear safety arms • 87" drive through width • 50% more bearing contact than competitors increases stability • Stainless steel air-lock release cylinder prevents rust NEW ADDITIONS: Larger 8-1/2" diameter chrome piston • Enhanced raised wiper at top and bottom of bearing provides better grease retention • Minimizes contamination from entering into bearings EW10 & EW12: 10,000 & 12,000 LB. CAPACITY INGROUND LIFTS • Challenger's new wide inground lifts provide the necessary drive-through clearance for servicing wide-bodied, exotic, and electric vehicles • 3-Stage arms allow for more efficient vehicle spotting, and 90% more under-car clearance allows easy battery removal and installation in electric vehicles EV READY 307-01021 (Lowered) 307-01020 87" DRIVE THROUGH WIDTH 307-01021 (Raised) ASCOT NO. MFG. NO. 307-01021 EV1020 DESCRIPTION 10,000 lb. Capacity In Ground Lift CHALLENGER INGROUND LIFT SPECIFICATIONS ASCOT NO. MFG. NO. 307-01021 305-01020 EV1020 LIFTING CAPACITY (LBS.) 10,000 lbs. EW10 10,000 lbs. ARM CONFIG. STROKE 3-stage front & rear 3-Stage Front & Rear 305-01220 EW12 12,000 lbs. 3-Stage Front & Rear 68” RISE HEIGHT 74” OVERALL WIDTH 97" DRIVE THRU CLEARANCE 87” ARM REACH 20" - 42" SCREW PAD HEIGHT 3.875” - 6” PLUNGER DIAMETER 8.5" SPEED OF RISE 38s POWER REQ. 2HP, 208v-230v, 60Hz, 1Ph 2HP, 72” 78” 118” 88” 20” - 42” 4” - 6.125” 8.5” 41s 208v-230v 3HP, 208v-230v 2HP, 72” 78” 121.5” 88” 20.125” - 48.125” 4” - 6.125” 8.5” 63s 208v-230v 3HP, 208v-230v BENCH MOUNT BENCH MOUNT LEVER

SERVICE EQUIPMENT RUBBER BLOCKS & LIFT PADS RUBBER LIFT PAD (4" X 4") • RUBBER PAD DIMENSIONS: 4" x 4" • Kit of four rubber pads • Replacement pads for Challenger CL9 and CL10 lifts 309-00009 ASCOT NO. MFG. NO. 309-00009 JOK09O DESCRIPTION Rubber Lift Pad - 4" x 4" RUBBER LIFT PAD (3.25" X 4") • RUBBER PAD DIMENSIONS: 3.25" x 4" • Kit of four rubber pads • Replacement pads for Rotary SPO10, SPO12 lifts 309-00022 ASCOT NO. MFG. NO. 309-00022 JOK22D DESCRIPTION Rubber Lift Pad - 3.25" x 4" 309-00003 ASCOT NO. MFG. NO. 309-00003 JOK03M DESCRIPTION Rubber Lift Pad - 5" Round RUBBER LIFT PAD (5" ROUND) • RUBBER PAD DIMENSIONS: 5" round • Kit of four rubber pads • Replacement pads for Nussbaum lifts 328 RUBBER LIFT PAD (4" X 5") • RUBBER PAD DIMENSIONS: 4" x 5" • Kit of four rubber pads • Replacement pads for Ammco, Ben Pearson lifts RUBBER LIFT PAD (5.25" ROUND) • RUBBER PAD DIMENSIONS: 5.25" round • Kit of four rubber pads • Replacement pads for Challenger CL10, Quality lifts 309-00005 ASCOT NO. MFG. NO. 309-00005 JOK05M 309-00014 ASCOT NO. MFG. NO. DESCRIPTION 309-00014 JOK14O DESCRIPTION Rubber Lift Pad - 4" x 5" Rubber Lift Pad - 5.25" Round RUBBER LIFT PAD (6.25" ROUND SLIP ON) • RUBBER PAD DIMENSIONS: 6.25" Round Slip On • Kit of four rubber pads • Replacement pads for ALM Lifts 309-00006 ASCOT NO. MFG. NO. 309-00007 JOK07M ASCOT NO. MFG. NO. DESCRIPTION 309-00006 JOK06M Rubber Lift Pad - 6.25" Round Slip On RUBBER LIFT PAD (5" X 5") • RUBBER PAD DIMENSIONS: 5" x 5" • Kit of four rubber pads • Replacement pads for Forward, Worth, American, Gemini, Grand, Tuxedo, Eagle, Whip lifts 309-00007 DESCRIPTION Rubber Lift Pad - 5" x 5"

329 SERVICE EQUIPMENT RUBBER BLOCKS & LIFT PADS RUBBER LIFT PADS FOR MUSTANG MACH-E VEHICLES • Designed specifically for the Mustang Mach E, these jack pads feature a strut that aligns precisely with the vehicle’s jacking points • Engineered to fit the Mustang Mach E (20212025 models), these pads help maintain secure contact with jacking points, reducing the risk of slippage during tire changes or maintenance for added safety • Crafted from high-strength rubber in a one-piece, thickened design, these jack pads are built for repeated use • Made in China RUBBER JACK PADS FOR CORVETTE VEHICLES • Professional for Corvette Lift Pads, Essential for C5, C6, C7, C8 Corvette Jacking - Heavy Duty Rubber Jack Pads (Set of 4) • Tailored specifically for Corvette vehicles • Offers the perfect solution for a safe and damage-free lift • With these purpose-built tools, you can lift your Corvette confidently, without worrying about scratches or bent pinch welds • The package includes four jack pads and a convenient storage case • Made in China 309-26784 ASCOT NO. MFG. NO. DESCRIPTION 309-26784 309-93624 ASCOT NO. MFG. NO. DESCRIPTION 309-93624 MAGNETIC LIFT PADS FOR RIVIAN VEHICLES • Fits Rivian R1T (Truck) and R1S (SUV) vehicles • Made of high-quality aluminum • 4-piece set of jack pucks in a convenient storage case for lifting your Rivian safely • Protects battery, rocker panels & paint when lifting your Rivian • Made in China YEMA04 Rubber Lift Pads for Mustang Mach-E Vehicles - Set of 4 RUBBER JACK PADS FOR TESLA VEHICLES • Lifting jack pads for tesla models • Set of four in convenient carrying case • Protect the vehicle, battery and paint from damage • Can be used with floor jack or 2-post lifts • Top piece fits into designated factory lifting points CORV04 Rubber Jack Pads for Corvette Vehicles - Set of 4 309-00404 309-06757 ASCOT NO. MFG. NO. DESCRIPTION 309-06757 RVIN04 Magnetic Lift Pads for Rivian Vehicles - Set of 4 ASCOT NO. MFG. NO. DESCRIPTION 309-00404 309-00405 TJP4 TJP4-Y Rubber Jack Pads for Tesla Vehicles - Set of 4 Rubber Jack Pads for Tesla Model Y Vehicles - Set of 4

SERVICE EQUIPMENT MACAN - GAS ENGINE JACK PADS • Set of 4 removable blocks that fit snugly into the factory rectangular jacking sockets preventing damage from a jack or lifting saddle to the surrounding undercarriage or rocker trim. RUBBER BLOCKS & LIFT PADS COMING Q4 2026! CAYENNE JACK PADS ASCOT NO. MFG. NO. 309-62244 DESCRIPTION MACAN44 Macan - Gas Engine Jack Pads • Set of 4 jack socket adaptor, model years 2019 to 2026, that fit snugly into the factory rectangular jacking sockets preventing damage from a jack or lifting saddle to the surrounding undercarriage 330 MACAN - EV MODEL JACK PADS • Set of 4 protective undercarriage mounts designed for the Electric Macan’s unique factory jack point sockets to prevent damaging the sensitive plastic surrounding the EV’s high-voltage battery floor area ASCOT NO. MFG. NO. 309-22904 ASCOT NO. MFG. NO. 309-62226 DESCRIPTION MACAN04 URETHANE LIFT PADS FOR CHALLENGER LIFTS • Fits Models: Challenger Lift Models CL10, CL12, E10, S10, EV1020 • Overall Size (US Standard): 3-27/32” x 3-15/16” (3.85 x 3.93 in) • Overall Size (Metric): 97.79 mm x 99.822 mm • Arm Pad Depth: 2/5” thick (0.4 in / 10.160 mm) • Arm Pad Shape: Octagon • Arm Pad Material: Urethane • Connection Type: Snap Into the Adapter base ASCOT NO. MFG. NO. 309-00019 DESCRIPTION BH-7232-01U-4 Urethane Lift Pads For Challenger Lifts Macan - EV Model Jack Pads RUBBER BLOCKS • RUBBER BLOCK DIMENSIONS: 6" x 4" • Kit of four rubber blocks • Spacer blocks for Rotary Airjacks and all Mid-Rise pad lifts 309-000 DESCRIPTION CAYENNE04 Cayenne Jack Pads 309-00019 ASCOT NO. MFG. NO. 309-00011 309-00013 JORB-1 JORB-3 DESCRIPTION Rubber Block 1.5” Rubber Block 3"

331 SERVICE EQUIPMENT HYDRAULIC SHOP PRESSES 25,50 AND 100-TON CAPACITY HYDRAULIC SHOP PRESSES • For heavy duty use in truck garages and industrial work shops • Manually operated two speed pump provides quick ram travel to load • Hand operated winch raises and lowers press bed • Welded frames for strength and no assembly required • Self-retracting ram is bearing mounted for lateral movement on head channel • Delivered Fully Assembled and Tested • ASSEMBLED IN THE USA • 78057A features air/hydraulic foot pump and 10' hose • 78058A and 78110B feature electro/hydraulic pump ® PROFESSIONAL LIFTING EQUIPMENT FOR HEAVY DUTY USE QUICK RAM TRAVEL TO LOAD 317-78058 CAP. ASCOT NO. 317-78024 317-78055 317-78057 317-78058 317-78077 317-78078 317-78110 MFG. NO. OPERATING SYSTEM Air/Hydraulic 78024A 78055A 78057A 78058A 78077 78078 78110B Manual Air/Hydraulic Electro/Hydraulic Air/Hydraulic Electro/Hydraulic Electro/Hydraulic (TONS) RAM TRAVEL MIN. HGT. / MAX. HGT. 6-3/4" / 40" 25 50 50 50 50 50 100 8" 6-1/4" 6-1/4" 6-1/4" 13-1/4" 13-1/4" 10-1/4" 7-1/2"/ 32-5/8” 7-1/2" / 32-5/8” 7-1/2" / 32-5/8” 7-1/2" / 32-5/8" 7-1/2" / 32-5/8" 18-1/4" / 45-3/4” THROAT WIDTH 30-1/2" 34-1/2" 34-1/2" 34-1/2" 34-1/2" 34-1/2" 40-1/4" BED HEIGHT ADJ. 8" x 4-3/4" 7 x 5" 7 x 5" 7 x 5" 7 x 5" 7 x 5" 8 x 4-1/2" BETWEEN UPRIGHTS 6" 5-5/8" 5-5/8" 5-5/8" 5-5/8" 5-5/8" 5-5/8" BETWEEN BED RAILS 7" 7-3/8" 7-3/8" 7-3/8" 7-3/8" 7-3/8" 9" WT. (LB.) 430 804 801 814 833 846 1,777

SERVICE EQUIPMENT HYDRAULIC SHOP PRESSES 20,35 AND 50-TON CAPACITY HYDRAULIC SHOP PRESSES 20-TON • Automotive and light industrial use • Eight level bed adjustment • 20 Ton bottle jack with overload protection. 8 1/2" stroke • Heavy-duty return springs for fast ram retraction • Reinforced head plate • Bed rail opening 7 1/4" with 22 1/2" post opening • 61" tall with a 27" base width • Ship weight 280 lbs 35-TON • Automotive and heavy-duty use • Two-speed hand pump provides faster travel to load while the air/hydraulic (with load protection) allows for effortless operation • Seven bed adjustments • Frame-mounted hydraulic pressure gauge • 6 1/2" ram stroke • 7 1/2" bed rail opening with 24" post opening • 66" tall with 30" base width • Ship weight 312 lbs. BRANICK STRUT SPRING COMPRESSOR • The 7600 handles the heaviest coil-over-shocks, on light trucks and SUV's, without needing additional adapters • Longer handles for extra torque • The multi-positions upper spring hooks can be arranged for ultimate flexibility to fit "factory" coil spring configurations • It has a longer compression stroke and an integrated structural ring guard • Whether long, short, narrow, or angled, the 7600 will get it done • MADE IN THE U.S.A. 228-00761 332 317-00820 317-00834 ASCOT NO. MFG. NO. DESCRIPTION 228-07600 228-00761 228-00764 7600 761 764 ASCOT NO. 317-00820 317-00834 317-00837 MFG. NO. CAP. 820A 20 834 837 (TONS) STROKE 8-1/2" 6-1/2" 35 50 7" SPACE INTERVAL 4-1/2" 4-1/2" 5-1/2" BED RAIL OPENING 7-1/4" 7-1/2" 9" POST OPENING 22-1/2" 24" 32" BASE WIDTH HEIGHT 27" 30" 44" 61" 66" 68" SHIP WEIGHT 280 lbs. 312 lbs. 672 lbs. Strut Spring Compressor Bench Mount for Strut Spring Compressor Mobile Cart for Strut Spring Compressor

THE ADVANTAGE OF Tire Balancing Beads DOUBLING TRUCK TIRE LIFE REPORTED All rotating parts of the wheel assembly must be balanced as a single unit For 30 years, tens of millions of complete wheel assemblies have been balanced using Counteract, and there has never been a single tire warranty issue reported. PROVEN TO IMPROVE FUEL ECONOMY Counteract is the only balancing product in the world proven to increase fuel economy. Counteract has demonstrated savings of at least 2.2% in two separate SAE J1321 and TMC RP-1102 Type II Fuel Tests. Don't believe us? You can download and review the tests yourself at www.cbbtests.com REDUCE VIBRATIONS & MECHANICAL WEAR There is more to balance than just the tire and wheel. Counteract's unique technology will also balance everything rotating on the axle end including the brake drum and hub, while readjusting itself on the go when experiencing new and changing out of balance conditions. Something wheel weights & machine balancing cannot do. PROVEN TO EXTEND TIRE LIFE Counteract Balancing Beads reduces rolling resistance of the tire up to 18%. This, in turn, reduces tire wear. When a tire and complete wheel assembly is properly balanced, on average, Counteract is known to increase tire life by at least 30%. REDUCE MAINTENANCE COSTS Heavy vibration for extended periods of time is one of the leading causes of maintenance issues. On average it takes 10-12 minutes to balance a transport truck tire with wheel weights. Using Counteract, it only takes the time needed to mount the tire. RETREADABILITY/LOWER TEMPERATURE Counteract has proven reductions in tire operating temperature by up to 63°F. This helps eliminate thermal degradation and preserves the tire casing for retreading. ENVIRONMENTALLY FRIENDLY Counteract is manufactured from recycled tempered glass, utilizing minimal new raw materials. The beads are 99.9% glass with a special coating that allows them to repel and resist moisture. Lead weights sometimes fall off the rim while driving, damaging the surrounding environment, where counteract remains inside for the life of the tire. Before Counteract After Counteract Added Balanced for the lifetime of the tire NO NEED TO REBALANCE Direction REBOUND REBOUND REBOUND REBOUND BALANCED E H E H O E T H O T A A P A P Y V Y V Y Y S V Y S S S S V V P P E P A E A O O O H H T T T

WHEEL BALANCING WHEEL BALANCING Passenger Wheel Weights Truck Wheel Weights Adhesive Wheel Weights & Rolls Wheel Weight Displays & Kits Wheel Weight Tools Balancing Beads

335 WHEEL BALANCING LEAD PASSENGER WHEEL WEIGHTS AW: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Eagle, Geo, Isuzu, Oldsmobile, Plymouth & Pontiac EN: Acura, Audi, Ford Trucks, Honda, Mercedes & Volkswagen FN: Acura, Geo, Honda, Infiniti, Lexus, Nissan & Toyota IAW: AMC, Audi, BMW, Chrysler, Dodge, Eagle, Geo, Hyundai, Merkur, Mitsubishi, Nissan, Plymouth, Pontiac, Saab, Sterling, Subaru, Suzuki, Toyota, Volkswagen & Volvo AWN EN FN LH: Chrysler, Dodge & Plymouth MC: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Eagle, Ford, Lincoln, Mazda, Mercury, Mitsubishi, Oldsmobile, Plymouth, Pontiac & Satum APPLICATIONS: APPLICATIONS: FORD: All up to 1984; CHRYSLER: All up to 1989; GM: All up to 1987; decreasingly used from 1988-2000 NOTE: AWN = ALC AUDI: All from 1997; VW: All from 1997; used on many aftermarket alloy wheels with thin rim flanges NOTE: EN = ALCEN APPLICATIONS: TOYOTA: All since 1990; LEXUS: All since 1990; HONDA: All since 1989; ACURA: All since 1990; NISSAN: All since 1990; INFINITI: All since 1990; ISUZU: All since 1997; MAZDA: All since 1990; DAEWOO: All since 1999 NOTE: FN = ALCFN Available sizes: .025 oz - 3.00 oz (Coated or Uncoated) Quantity: 25/box (Coated), 50/box (Uncoated) IAW Available sizes: 10 g - 60 g (Coated) Quantity: 25/box LH Available sizes: 5 g - 80 g (Coated) Quantity: 25/box MCN APPLICATIONS: APPLICATIONS: AUDI: Up To 1996; VW: Up To 1996; BMW, CATERA, GEO HYUNDAI, JAGUAR, KIA, MITSUBISHI, SUBARU, SUZUKI, VOLVO NOTE: IAW = ALCIW Available sizes: 5 g - 60 g (Coated or Uncoated) Quantity: 25/box Available sizes: .25 oz - 3.00 oz (Coated) Quantity: 25/box AUDI: All from 1997; VW: All from 1997; used on many aftermarket alloy wheels with thin rim flanges NOTE: LH = ALCLH APPLICATIONS: FORD: All from 1985; CHRYSLER: All from 1990 to 1997; some models changed to LHS in 1998; GM: Increasingly used starting in 1988; as of 2000 only C5 Corvette remains AWS NOTE: MCN = ALCMC Available sizes: .25 oz - 4 oz (Coated), .25 oz - 3 oz (Uncoated) Quantity: 25/box (Coated), 50/box (Uncoated)

WHEEL BALANCING ZINC PASSENGER WHEEL WEIGHTS AW: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Eagle, Geo, Isuzu, Oldsmobile, Plymouth & Pontiac EN: Acura, Audi, Ford Trucks, Honda, Mercedes & Volkswagen FN: Acura, Geo, Honda, Infiniti, Lexus, Nissan & Toyota IAW: AMC, Audi, BMW, Chrysler, Dodge, Eagle, Geo, Hyundai, Merkur, Mitsubishi, Nissan, Plymouth, Pontiac, Saab, Sterling, Subaru, Suzuki, Toyota, Volkswagen & Volvo AWZ ENZ LH: Chrysler, Dodge & Plymouth MC: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Eagle, Ford, Lincoln, Mazda, Mercury, Mitsubishi, Oldsmobile, Plymouth, Pontiac & Satum T: Chevrolet, Ford, GMC & Lincoln P: Most common for steel wheels FNZ IAWZ 336 APPLICATIONS: APPLICATIONS: FORD: All up to 1984; CHRYSLER: All up to 1989; GM: All up to 1987; decreasingly used from 1988-2000 AUDI: All from 1997; VW: All from 1997; Used on many aftermarket alloy wheels with thin rim flanges APPLICATIONS: TOYOTA: All since 1990; LEXUS: All since 1990; HONDA: All since 1989; ACURA: All since 1990; NISSAN: All since 1990; INFINITI: All since 1990; ISUZU: All since 1997; MAZDA: All since 1990; DAEWOO: All since 1999 Available sizes: .025 oz - 3.00 oz Quantity: 25/box Available sizes: 5 g - 60 g Quantity: 25/box Available sizes: 5 g - 60 g Quantity: 25/box APPLICATIONS: AUDI: Up to 1996; VW: Up to 1996; BMW, CATERA GEO, HYUNDAI, JAGUAR, KIA, MITSUBISHI, SUBARU, SUZUKI, VOLVO Available sizes: 5 g - 60 g Quantity: 25/box LHZ MCZ PZ TZ APPLICATIONS: APPLICATIONS: CHRYSLER: Used on LH platform (Intrepid, Concorde, LHS, 300M) and all Mini Van models since 1998. Also used on 2000 Neon, 2001 PT Cruiser and 2001 Sebring & Stratus sedans and convertibles Available sizes: .025 oz - 3.00 oz Quantity: 25/box FORD: All from 1985; CHRYSLER: All from 1990 to 1997; some models changed to LHS in 1998; GM: Increasingly used starting in 1988; as of 2000 only C5 Corvette remains AWS Available sizes: .025 oz - 3.00 oz Quantity: 25/box APPLICATIONS: STANDARD PASSENGER CAR with 13” to 15” steel wheels APPLICATIONS: CHEVROLET: Full Size Pick Up, Suburban, Yukon, Tahoe from 2000; FORD: Expedition from 1997, F-100, F-150 from 1997; LINCOLN: Lincoln Navigator with alloy & steel wheels from 1998 Available sizes: .025 oz - 3.00 oz Quantity: 25/box Available sizes: .025 oz - 3.00 oz Quantity: 25/box

337 WHEEL BALANCING STEEL PASSENGER WHEEL WEIGHTS AW: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Eagle, Geo, Isuzu, Oldsmobile, Plymouth & Pontiac EN: Acura, Audi, Ford Trucks, Honda, Mercedes & Volkswagen FN: Acura, Geo, Honda, Infiniti, Lexus, Nissan & Toyota IAW: AMC, Audi, BMW, Chrysler, Dodge, Eagle, Geo, Hyundai, Merkur, Mitsubishi, Nissan, Plymouth, Pontiac, Saab, Sterling, Subaru, Suzuki, Toyota, Volkswagen & Volvo AWFE ENFE LH: Chrysler, Dodge & Plymouth MC: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Eagle, Ford, Lincoln, Mazda, Mercury, Mitsubishi, Oldsmobile, Plymouth, Pontiac & Satum T: Chevrolet, Ford, GMC & Lincoln P: Most common for steel wheels FNFE IAWFE APPLICATIONS: APPLICATIONS: FORD: All up to 1984; CHRYSLER: All up to 1989; GM: All up to 1987; decreasingly used from 1988-2000 AUDI: All from 1997; VW: All from 1997; Used on many aftermarket alloy wheels with thin rim flanges APPLICATIONS: TOYOTA: All since 1990; LEXUS: All since 1990; HONDA: All since 1989; ACURA: All since 1990; NISSAN: All since 1990; INFINITI: All since 1990; ISUZU: All since 1997; MAZDA: All since 1990; DAEWOO: All since 1999 Available sizes: .025 oz - 3.00 oz Quantity: 25/box Available sizes: 5 g - 60 g Quantity: 25/box Available sizes: 5 g - 60 g Quantity: 25/box APPLICATIONS: AUDI: Up to 1996; VW: Up to 1996; BMW, CATERA GEO, HYUNDAI, JAGUAR, KIA, MITSUBISHI, SUBARU, SUZUKI, VOLVO Available sizes: 5 g - 60 g Quantity: 25/box LHFE MCFE PFE TFE APPLICATIONS: APPLICATIONS: CHRYSLER: Used on LH platform (Intrepid, Concorde, LHS, 300M) and all Mini Van models since 1998. Also used on 2000 Neon, 2001 PT Cruiser and 2001 Sebring & Stratus sedans and convertibles Available sizes: .025 oz - 3.00 oz Quantity: 25/box FORD: All from 1985; CHRYSLER: All from 1990 to 1997; some models changed to LHS in 1998; GM: Increasingly used starting in 1988; as of 2000 only C5 Corvette remains AWS Available sizes: .025 oz - 3.00 oz Quantity: 25/box APPLICATIONS: STANDARD PASSENGER CAR with 13” to 15” steel wheels APPLICATIONS: CHEVROLET: Full Size Pick Up, Suburban, Yukon, Tahoe from 2000; FORD: Expedition from 1997, F-100, F-150 from 1997; LINCOLN: Lincoln Navigator with alloy & steel wheels from 1998 Available sizes: 5 g - 60 g Quantity: 25/box Available sizes: .025 oz - 3.00 oz Quantity: 25/box

WHEEL BALANCING PLASTEEL® PASSENGER WHEEL WEIGHTS AWPS: Used on most domestic vehicles prior to 1995 with alloy wheels ENPS: Used on Mercedes, Audi & Volkswagen & many aftermarket alloy wheels with thin flanges IAWPS: Used on some European & Asian vehicles with alloy wheels FNPS: Used on most Japanese vehicles with alloy wheels AWPS ENPS MCPS: Used on most North American vehicles with alloy wheels TPS: Used on some light trucks & SUVs with alloy wheels PPS: Made to fit under hub caps on alloy wheels FNPS IAWPS 338 Available sizes: .025 oz - 3.00 oz Quantity: 25/box Available sizes: 5 g - 60 g Quantity: 25/box Available sizes: 5 g - 60 g Quantity: 25/box Available sizes: 5 g - 60 g Quantity: 25/box MCPS PPS TPS Available sizes: .025 oz - 3.00 oz Quantity: 25/box Available sizes: .025 oz - 3.00 oz Quantity: 25/box Available sizes: .025 oz - 3.00 oz Quantity: 25/box tested. proven. trusted.

339 WHEEL BALANCING HEAVY DUTY LEAD TRUCK WHEEL WEIGHTS LT1 I7 TAL APPLICATIONS: APPLICATIONS: • For light trucks, 3/4 & 1 ton vehicles with either tube or tubeless rims where such rims are too thick for “P” series weights • For use on heavier trucks with thin rim flanges • Use “P” series weights on 1/2 ton vehicles • Use rim gauge RG2 to verify correct application NOTE: LT1 = BTS • Most popular weight for the medium duty truck • Used on most trucks with tube type tires NOTE: 17 = BTLM + E APPLICATIONS: • Special weight for all Alcoa and Accuride (from 1983) aluminum tubeless heavy truck wheels; fits both sides of the wheel • Replace the “OS-TAL” and “DS-TAL” series • Use rim gauge RG2 to verify correct application (either OS-TAL or DS-TAL slot) • Recommend coated weights on all vehicles having alloy wheels NOTE: TAL = BTCAL Available sizes: .5 oz - 6.00 oz Quantity: 25/box Available sizes: 1 oz - 16 oz Quantity: 25/box (10 & 12 oz: 20/box, 14 & 16 oz: 10/box) Available sizes: 2 oz - 8 oz Quantity: 25/box CT RC TS APPLICATIONS: APPLICATIONS: • Used on heavy duty trucks with Firestone or Accuride, Budd or Goodyear tubeless rims (except steel rims with curved edges) • Primarily used on rim widths of 6.75", 7.50" and 8.25" NOTE: CT = BTLT • Used on heavy duty trucks with Firestone or Accuride, Radial Commander rims • Can be used with new strip steel rims with curved edges • Use rim gauge RG2 to verify correct application NOTE: RC = BTRC APPLICATIONS: • All 1997 and newer Ford trucks with alloy and steel wheels use the “TS” series wheel weight • Many domestic trucks with decorative steel wheels, Ford truck new alloy wheels • New domestic full size trucks equipped with wheels using thicker flanges and chrome or powder coatings NOTE: TN = TTC Available sizes: 2 oz - 16 oz Quantity: 25/box Available sizes: 2 - 12 oz Quantity: 25/box (10 & 12 oz: 20/box) Available sizes: .025 oz - 5 oz Quantity: 25/box

WHEEL BALANCING ZINC TRUCK LT1Z I7Z WHEEL WEIGHTS TALZ 340 APPLICATIONS: APPLICATIONS: • For light trucks, 3/4 & 1 ton vehicles with either tube or tubeless rims where such rims are too thick for “P” series weights • For use on heavier trucks with thin rim flanges • Use “P” series weights on 1/2 ton vehicles • Use rim gauge RG2 to verify correct application NOTE: LT1 = BTS Available sizes: .5 oz - 5.00 oz Quantity: 25/box • Most popular weight for the medium duty truck • Used on most trucks with tube type tires NOTE: 17 = BTLM + E APPLICATIONS: • Special weight for all Alcoa and Accuride (from 1983) aluminum tubeless heavy truck wheels; fits both sides of the wheel • Replace the “OS-TAL” and “DS-TAL” series • Use rim gauge RG2 to verify correct application (either OS-TAL or DS-TAL slot) • Recommend coated weights on all vehicles having alloy wheels NOTE: TAL = BTCAL Available sizes: 1 oz - 8 oz Quantity: 25/box (10 & 12 oz: 20/box, 14 & 16 oz: 10/box) Available sizes: 1 oz - 6 oz Quantity: 25/box ASCOT RIM GAUGES CTZ • Convenient and economical gauge that guides you to the correct wheel weight application• Helpful with alloy wheels and thinner high strength steel Wheels that have • numerous new rim configurations APPLICATIONS: 486-75012 • Used on heavy duty trucks with Firestone or Accuride, Budd or Goodyear tubeless rims (except steel rims with curved edges) • Primarily used on rim widths of 6.75”, 7.50” and 8.25” NOTE: CT = BTLT 486-75011 Available sizes: 2 oz - 6 oz Quantity: 25/box Ascot No. Mfg. No. 486-75011 486-75012 Description ARGP1 ARPG2 Ascot Rim Gauge For Passenger Cars Truck Rim Gauge

341 WHEEL BALANCING STEEL ADHESIVE WHEEL WEIGHTS PLOMBCO STEEL ADHESIVE WHEEL WEIGHTS - BOXES 484-28408 484-41226 484-28418 484-48312 484-31234 484-48322 484-50615 ASCOT NO. 484-32230 484-32252 484-28408 484-31234 484-40848 484-50615 484-52312 484-50610 484-31230 484-40828 484-50615 MFG. NO. 312Fe-30CW 312Fe-52CW 408FE-28 312Fe-30 408Fe-48 506Fe-15 312FE-52 506FeB-15 312FeB-30 408FeB-28 506FeB-15 TAPE TYPE DESCRIPTION PLOMBCO STEEL ADHESIVE Cold Weather Cold Weather Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base Adhesive Adhesive Adhesive 30 * 6" Bars Precut in .25 Oz. Segments of .75" Wide 52 * 6" Bars Precut in .25 Oz. Segments of .75" Wide Steel Adhesive Wheel Weight: 4 Oz. (28 Strips per Box) Steel Adhesive Wheel Weight: 3 Oz. (30 Strips per Box) 408Fe-48 Steel Adhesive Wheel Weight: 4 Oz. (48 Strips/Box) Steel Adhesive Wheel Weight: 6 Oz. (15 Strips per Box) Steel Adhesive Wheel Weight: 3 Oz. (52 Strips per Box) Steel Adhesive Wheel Weight: 1 Oz. Black Steel Adhesive Wheel Weight StickPro .25 ounce, black, QuikStik black tape Steel Adhesive Wheel Weight StickPro .50 ounce, black, QuikStik black tape Steel Adhesive Wheel Weight StickPro 1.00 ounce, black, QuikStik black tape

WHEEL BALANCING STEEL ADHESIVE WHEEL WEIGHTS STEEL SEGMENTED WHEEL WEIGHTS • Pre-cut weights • No cutting, no pre-contouring and no waste • Each segment is stamped with the actual weight in ounces • US white “quick” tape PERFECT QUIKSTIK™ SEGMENTED STEEL WHEEL WEIGHTS • Only pre-cut, pre-taped weight • No cutting, no pre-contouring and no waste • Each segment is stamped with the actual weight in ounces and grams 342 484-16001 484-00300 484-17127 484-27026 484-20576 ASCOT NO. 484-37026 ASCOT NO. MFG. NO. 484-16001 484-17026 484-17127 484-27026 484-37026 1184 14308 12187 14308W 14308B DESCRIPTION STEEL ADHESIVE 1 Oz. Steel Adhesive Wheel Weights: 1 Oz. Strips, 4 Segments (18 Strips per Box) 1/4 Oz. Steel Adhesive Wheel Weights with Plastic Powder Coating: 1/4 Oz. Strips, 8 Segments (30 Strips per Box) 1/2 Oz. Steel Adhesive Wheel Weights: 1/2 Oz. Strips, 7 Segments (18 Strips per Box) 1/4 Oz. White Steel Adhesive Wheel Weights with White Powder Coating: 1/4 Oz. Strips, 8 Segments (30 Strips per Box) 1/4 Oz. Black Steel Adhesive Wheel Weights with Black Powder Coating: 1/4 Oz. Strips, 8 Segments (30 Strips per Box) STEEL ADHESIVE WHEEL WEIGHTS ASCOT NO. MFG. NO. 484-10101 484-10201 484-10301 484-67026 484-77026 484-10100 484-10102 484-10200 484-10300 484-10400 FSF101B FSF102B FSF103B 24308B 34308B FSF101C FSF101CP FSF102C FSF103C FSF104C • USA “Easy Peel” tape • Tape on top • Blue tape black adhesive 484-10101 DESCRIPTION BLACK STEEL ADHESIVE 1/4 Oz. Adhesive Wheel Weight: 3 Oz. (48 Strips per Box) 1/2 Oz. Adhesive Wheel Weight: 3 Oz. (48 Strips per Box) 1 Oz. Adhesive Wheel Weight: 4 Oz. (48 Strips per Box) 1/2 Oz. Adhesive Wheel Weight: 3.5 Oz. Strip (18 Strips per Box) 1 Oz. Adhesive Wheel Weight: 4 Oz. Strip (18 Strips per Box) STEEL ADHESIVE 1/4 Oz. Adhesive Wheel Weight: 3 Oz. (48 Strips per Box) 1/4 Oz. Adhesive Wheel Weight: 3 Oz. (48 Strips per Box) - Paper Backing 1/2 Oz. Adhesive Wheel Weight: 3 Oz. (48 Strips per Box) 1 Oz. Adhesive Wheel Weight: 4 Oz. (36 Strips per Box) 2 Oz. Adhesive Wheel Weight: 6 Oz. (18 Strips per Box) 484-10102 484-10201 484-00300 484-00060 484-20624 484-20576 484-22576 484-30224 484-31360 484-30225 484-32224 484-20624 MFG. NO. SSG060N 200624ST 200576FE 200576FEBLK 300224FE 300360ST 300224FEBLK 30224FEBLK 200624ST DESCRIPTION PERFECT QUIK-STIK™ STEEL ADHESIVE SST300N Pre-Taped Steel Weight - 3 Oz. Segments Pre-Taped Steel Weight - 60 Gram Segments Pre-Taped Steel Weight - 3 Oz. Segments Pre-Taped Steel Weight - 3 Oz. Segments (No QuikTAB™ feature.) Pre-Taped Black Steel Weight - 3 Oz. Segments (No QuikTab Feature) Pre-Taped Steel Wheel Weight - 4 Oz. Segments (28 Strips per box) Pre-Taped Steel Weight - 6 Oz. Segments Pre-Taped Steel Wheel Weight - 4 Oz. Segments (28 Strips per box) Pre-Taped Black Steel Wheel Weight - 4 Oz. Segments (28 Strips per box) Pre-Taped Steel Weight - 3 Oz. Segments Black 484-10301 484-10400

343 WHEEL BALANCING LEAD ADHESIVE WHEEL WEIGHTS PERFECT QUIKSTIK™ SEGMENTED LEAD WHEEL WEIGHTS • Only pre-cut pre-taped weight • Each segment is stamped with the actual weight in ounces and grams • Available in 1/2", 3/4" low profile and 3/4" truck weight design • Wheel weight for racing/off road performance applications 4-SLOT WHEEL WEIGHT ROLL STAND CONVERSION KIT • Convert a 4-slot wheel weight stand into a 6-slot wheel weight stand • Left and right slots and hardware included • All metal construction • Easy to assemble 484-11360 484-13360 484-00006 Ascot No. Mfg. No. 486-31285 WWR-2 4-Slot Wheel Weight Roll Stand Conversion Kit Description 484-30360 ADHESIVE WHEEL WEIGHT ROLL STANDS • All-metal construction• Accommodates three & four rolls • Floor mount • Easy to assemble • Adapter for smaller rolls 484-00112 ASCOT NO. MFG. NO. 484-11360 484-10720 484-00012 484-13360 484-30360 484-00006 484-00112 100360 100720 200624S 200624 300360 CL6 CL12 WEIGHT DESCRIPTION PERFECT LEAD ADHESIVE 3 Oz. 3 Oz. 3 Oz. 3 Oz. 6 Oz. 6 Oz. 12 Oz. Pre-Taped Weight 30 Strips of .25 Oz. Segments Pre-Taped Weight 60 Strips of .25 Oz. Segments Pre-Taped Weight 48 Strips of .25 Oz. Segments Pre-Taped Weight 52 Strips of .25 Oz. Segments Pre-Taped Truck Weight 30 Strips of 1 Oz. Segments Pre-Taped Truck Weight 30 Strips of 1 Oz. Segments Pre-Taped Truck Weight 8 Strips of 2 Oz. Segments ALL-METAL CONSTRUCTION 486-31282 486-31281 Ascot No. Mfg. No. 486-31281 486-31282 Description WWR-3 WWR-4 3-Slot Adhesive Wheel Weight Roll Stand 4-Slot Adhesive Wheel Weight Roll Stand

WHEEL BALANCING WHEEL WEIGHT DISPLAYS & KITS METAL WHEEL WEIGHT RACK • All-metal construction • 8 shelves • Includes dividers • 64 weight locations • Square tube to support the rack 32-BIN METAL STORAGE CABINET • Cabinet size: 33-3/4" (W) x 8-1/2" (D) x 19-1/4" (H) • BIN SIZE: 4" (W) x 8-3/8" (D) x 4-1/2" (H) • Keeps your tools and accessories organized and accessible • Heavy-duty, welded steel construction provides strength and stability • Hemmed bin fronts for retaining parts • Mounting holes located in the top and bottom • Shipped fully assembled and ready to use • Weight: 37 lbs. 344 ASCOT NO. MFG. NO. 719-00032 32B DESCRIPTION 32-Bin Metal Storage Cabinet 486-13733 WW-STK Wheel Weight Stickers WHEEL WEIGHT ROLL WIRE HANGERS • Hanging racks for adhesive wheel weights • Fits most popular wheel balancers • Single and double roll racks available • Heavy duty steel wire construction • Compatible with most adhesive wheel weight rolls 486-31283 ASCOT NO. MFG. NO. DESCRIPTION 486-31280 MFR Ascot No. Mfg. No. Metal Wheel Weight Rack 486-31283 WWRR-1 486-31284 WWRR-2 Description Single Roll Wheel Weight Wire Hanger Double Roll Wheel Weight Wire Hanger 486-31284

345 WHEEL BALANCING STEEL ADHESIVE WHEEL WEIGHT ROLLS PLOMBCO STEEL ROLLS ASCOT NO. MFG. NO. 320Fe DESCRIPTION PLOMBCO STEEL ROLLS: RUBBER TAPE 484-35320 484-42010 484-31010 420Fe 310Fe 20 lb. Roll - 1272 Segments (1/4 Oz.) 20 lb. Roll - 640 Segments (1/2 Oz.) 10 lb. Roll .25 ounce, QuikStik white tape 484-31020 310FE-CW 10 lb. Roll .25 ounce UltraLiner CW tape 484-41010 410Fe 10 lb. Roll .50 ounce, QuikStik white tape 484-41020 410Fe-CW 10 lb. Roll .50 ounce UltraLiner CW tape ASCOT NO. MFG. NO. 484-47026 PERFECT STEEL ADHESIVE WHEEL WEIGHT ROLLS • Familiar design: Features all of the same standard steel QuikStik characteristics • Only use the amount of weight you need each time you balance • Simply pull and rip • No cutting and no measuring • MADE IN THE USA ADHESIVE WHEEL WEIGHT ROLLS • Oversized white paper tape • Easy to peel • Easy to tear by hand • Available in grey steel or black steel • 3 rolls per case 145KG 484-47026 DESCRIPTION ADHESIVE ROLLS: ZINC OR STEEL 5 kg Steel Adhesive Wheel Weight Roll: 1/4 Oz. Segments (700 Segments per Roll) • Simply use the amount of weight you need each time you balance • Convenient pull and rip design • No cutting and no measuring • Rolled weights are more efficient and help reduce waste • Plastic coated • US white “quick” tape ADHESIVE WHEEL WEIGHT ROLLS 484-51501 484-21576 484-32360 484-61500 ASCOT NO. 484-03200 484-07500 484-21576 484-21624 484-32360 484-30022 484-33224 484-00576 484-00224 MFG. NO. SST32000N SSG7500N 200576FER 200624STR 300360STR 300224FER 30224FERBLK 200576FERBLK 300224FERBLK DESCRIPTION PERFECT STEEL ROLLS .25 Oz. (1280 Segments) 5G (1500 Segments) 0.25 Oz. (704 Segments) .25 Oz. (1280 Segments) .5 Oz. (640 Segments) 0.50 Oz. (640 Segments) Pre-Taped Black Steel Wheel Weight - 4 Oz. Segments (28 Strips per box) 0.25 Oz. (704 Segments) - Black 0.50 Oz. (640 Segments) - Black 484-71501 AVL515Fe5 ASCOT NO. 484-51500 484-51501 484-61500 484-61501 484-71500 MFG. NO. AVL315FeB AVL315FeS AVL414FeB AVL415FeS AVL515FeB DESCRIPTION Black Steel Adhesive Roll: 1/4 oz. Segments (960/roll) Grey Steel Adhesive Roll: 1/4 oz. Segments (960/roll) Black Steel Adhesive Roll: 1/2 oz. Segments (480/roll) Grey Steel Adhesive Roll: 1/2 oz. Segments (480/roll) Black Steel Adhesive Roll: 1 oz. Segmants (230/roll) Steel Adhesive Roll: 1 oz. Segmants (230/roll)

WHEEL BALANCING WHEEL WEIGHT TOOLS PREMIUM HEAVY DUTY PROFESSIONAL WHEEL WEIGHT HAMMER • Heavy duty construction • Black coated handles with red highlight • Designed for use on coated wheel weights • Will not mark alloy wheels • Replaceable plastic head available • Made in Taiwan COATED WHEEL WEIGHT HAMMER • Protects valuable wheels from damage • Features replaceable plastic head 346 486-00233 486-00133 486-33580 486-33584 ASCOT NO. MFG. NO. 486-33580 486-33581 3358 3358-B 486-33584 335804 DESCRIPTION Premium Heavy Duty Wheel Weight Hammer - Red Premium Heavy Duty Professional Wheel Weight Hammer - Black Replacement Head PREMIUM FIBERGLASS WHEEL WEIGHT HAMMER • Used to easily install and remov all types of steel and zinc clip-on wheel weights • Standard with large replaceable hook for prying • Fiberglass shaft for added durabilit • The hook is made from cold rolled steel • The striking face has a non-marring, surface protectiv medium-hard replaceable tip • Slipresistant, ergonomic grip reduces arm strain & fatigue • MADE IN THE US 486-11006 SPECIALTY WHEEL WEIGHT HAMMERS ASCOT NO. MFG. NO. DESCRIPTION 486-00233 486-00133 P-3B P-3H Soft Head Wheel Weight Hammer Replacement Head for P-3B Wheel Weight Hammer 486-07129 ASCOT NO. MFG. NO. DESCRIPTION 486-11000 486-11006 P110 15156 Premium Fiberglass Wheel Weight Hammer Replacement Tip for Pilot Truck Wheel Weight Hammer ASCOT NO. MFG. NO. 486-07129 486-51480 51400 51480 Truck Wheel Weight Hammer Deluxe Wheel Weight Hammer (Made of heat strengthened steel, comfortable vinyl handle grips, nylon durable hammer replaceable tip) DESCRIPTION

347 WHEEL BALANCING WHEEL WEIGHT TOOLS RED HEAVY DUTY ADHESIVE WHEEL WEIGHT SCRAPER PASSENGER CAR WHEEL WEIGHT HAMMER • The industry standard for passenger car wheel weight tools • Not for use on alloy or chrome wheels • 265mm long (large) made for gently removing adhesive wheel weights with minimal damage. Additional applications; removing decals, emblems, and body molding without scratching or damaging metal, glass, or paint • Lightweight, high-impact resistant nylon plastic material for maximum durability, resistant to deforming over time, and helps avoid scratching while removing tire wheel weights or other stubborn material • Sturdy design for a prolonged lifespan while in the field. A comfortable and baffle grip provides the user more control and absorbs vibration from consistent hammer blows, allowing for more precision work • Solvent-resistant and the blade is able to be re-sharpened. • Adaptable to multiple-sized wheels 486-00011 ASCOT NO. MFG. NO. 486-00011 P-1 DESCRIPTION Economy Chrome Wheel Weight Hammer 486-71512 EURO STYLE WHEEL WEIGHT HAMMER • Heavy Commercial Duty Design • Coated Handles for Comfort • Nickel Plated Vanadium ASCOT NO. MFG. NO. 486-71512 AS-002 DESCRIPTION Red Heavy Duty Adhesive Wheel Weight Scraper - 10.4" Length 486-00222 GT FORCE TWO-IN-ONE WHEEL WEIGHT APPLICATION AND REMOVAL TOOL ASCOT NO. MFG. NO. 486-00222 P-2C DESCRIPTION Euro-Style Wheel Weight Hammer HEAVY DUTY ADHESIVE WHEEL WEIGHT REMOVERS • For use with stick-on wheel weights: Removes emblems, body side moldings and stick-on wheel weights • Scrape off stickers without scratching paint or glass and gaskets from aluminum parts • Can be hit with a hammer • Knobbed handle to prevent hand from slipping • Made of high impact plastic • Resharpen with a file when needed 486-71510 • Eliminates finger injury by eliminating the need for a hammer • One tool for both installation and removal • Replaceable heads available • No more damaging expensive wheels with a hammer GT FORCE WHEEL WEIGHT TOOL IN ACTION 486-48301 486-71511 ASCOT NO. MFG. NO. DESCRIPTION 486-71510 486-71511 71510 71511 Red Heavy Duty Adhesive Wheel Weight Scraper Black Heavy Duty Adhesive Wheel Weight Scraper ASCOT NO. MFG. NO. 486-48301 GTF-01 DESCRIPTION GT Force Two-In-One Wheel Weight Application and Removal Tool

WHEEL BALANCING AXION TIRE BALANCING ASCOT EXCLUSIVE! ASCOT AXION TIRE BALANCING COMPOUND AXION™ is a fully custom-engineered, single-material formula developed for maximum reliability, durability, and performance. Designed to continuously adapt as the tire wears, AXION™ helps provide a smoother ride, reduced wheel-end vibration, and long-lasting balance without rebalancing. *Made by Counteract Key Benefits: • Improve Fuel Economy • TPMS Compatible • Anti-Slip Formula • Moisture Resistant 348 ASCOT NO. MFG. NO. DESCRIPTION 451-22203 AAB03 451-22204 451-22206 451-22208 451-22210 451-22212 451-22214 451-22216 AAB04 AAB06 AAB08 AAB10 AAB12 AAB14 AAB16 Ascot Axion Tire Balancing Compound - 3 Oz. Bag Ascot Axion Tire Balancing Compound - 4 Oz. Bag Ascot Axion Tire Balancing Compound - 6 Oz. Bag Ascot Axion Tire Balancing Compound - 8 Oz. Bag Ascot Axion Tire Balancing Compound - 10 Oz. Bag Ascot Axion Tire Balancing Compound - 12 Oz. Bag Ascot Axion Tire Balancing Compound - 14 Oz. Bag Ascot Axion Tire Balancing Compound - 16 Oz. Bag QTY./CASE 40 40 40 40 40 40 32 32 MED-HEAVY DUTY TRUCKS LIGHT TRUCKS OFF-ROAD JUST THROW THE CLEAR INSIDE BAG INTO YOUR TIRE! TRAILER ATV/UTV CLASSIC CAR TEAR HERE / DÉCHIRER ICI Anti-slip Formula Formule Antidérapante TPMS Compatible Compatible SSPP Lifetime Tire Balance Équilibrage des pneus à vie Résistant à L’humidité Moisture Resistant TM TEAR HERE / DÉCHIRER ICI p Formula dérapante

349 WHEEL BALANCING COUNTERACT BALANCING • Perfect balance - perfect wear • Clean, trouble free balancing micro-beads provide continuous self-adjusting balance • No clumping • Just open the outside package and throw the inside bag into the tire • Method allows the use of an air blaster to seat the tire on the rim without contaminating the seating area • Air blaster pressure inside the tire will collapse the bag containing Counteract Balancing Beads or the package will break open and release its contents soon after driving • Available in application sizes from half ton vehicles to heavy trucks • All packaging is color coded to tire size on application chart Just open the outside package and throw the inside bag into the tire! INCREASE TIRE LIFE IMPROVE FUEL ECONOMY TPMS COMPATIBLE REDUCE VIBRATIONS TROUBLE FREE ENVIRONMENTALLY FRIENDLY REDUCE MAINTENANCE COSTS GUARANTEED ASCOT NO. MFG. NO. 451-00013 CBB-IP 451-00203 451-00204 451-00205 451-00206 451-00208 451-00210 451-00212 451-00214 451-00216 3 Oz. BP 4 Oz. B 5 Oz. B 6 Oz. B 8 Oz. B 10 Oz. B 12 Oz. B 14 Oz. B 16 Oz. B 8 OZ GREASE TUBES • Our formula helps eliminate greasy messes on chassis and air hoses • Minimizes steer tire wear • Minimize premature wear on front end vehicle components • Verified for use in all 4 seasons DESCRIPTION Injector Pump for Balancing Beads 3 Oz. Bag in Bag 4 Oz. Bag in Bag 5 Oz. Bag in Bag 6 Oz. Bag in Bag 8 Oz. Bag in Bag 10 Oz. Bag in Bag 12 Oz. Bag in Bags 14 Oz. Bag in Bag 16 Oz. Bag in Bag QTY./CASE N/A 96 92 76 64 52 40 36 32 28 451-00013 2 OZ GREASE PACKETS • Lasts twice as long as competing grease products • Water-resistant • Contains rust and corrosion inhibitors • Two, easy to use applications • Eliminates friction and premature wear on trailer attachments ASCOT NO. MFG. NO. 451-50008 DESCRIPTION CBB-5WG8oz 8 OZ Grease Tubes ASCOT NO. MFG. NO. 451-50002 DESCRIPTION CBB-5WG2oz 2 Oz Grease Packets

WHEEL BALANCING COUNTERACT BALANCING COUNTERACT MOTORCYCLE DEALER PACKS • Each dealer bag contains 4 pre-measured bags of Counteract Motorcycle Balancing Beads • Includes 4 valve cores & 4 valve caps • Typically for shop use but may also be sold at a retail level for DIY customers looking for replacement product COUNTERACT MOTORCYCLE DIY KITS • Each kit contains pre-measured bags, plastic bottle with hose for installation, valve caps and cores, along with a valve core remover cap 350 451-05001 MK1OZ 451-03011 Kit A 451-03012 Kit B ASCOT NO. MFG. NO. 451-03011 451-03012 451-03013 451-03022 451-03023 451-03233 451-03223 Kit A Kit B Kit C Kit D Kit E Kit F Kit G 451-05002 MK2OZ COUNTERACT ATV/UTV DIY WHEEL BALANCING KITS • Each DIY kit comes with everything you need to balance your tires at home in your garage • Pre-measured bags of Counteract Balancing Beads for your tire size • Includes valve cores, valve caps, valve core remover, injection bottle and hose • KITS K, L, M N: 14 kits per case DESCRIPTION 1 oz (2) 1 oz (1) & 2 oz (1) 1 oz (1) & 3 oz (1) 2 oz (2) 2 oz (1) & 3 oz (1) 2 oz (1) & 3 oz (2) 2 oz (2) & 3 oz (1) 451-03022 Kit D QTY./CASE 40 40 40 40 40 40 40 451-05003 MK3OZ ASCOT NO. MFG. NO. 451-05001 MK1OZ 451-05002 451-05003 MK2OZ MK3OZ DESCRIPTION QTY./CASE 4 x 1 Oz. pre-measured bags 160 Applications (40 Dealer Bags) 4 x 2 Oz. pre-measured bags 128 Applications (32 Dealer Bags) 4 x 3 Oz. pre-measured bags 96 Applications (24 Dealer Bags) ASCOT NO. MFG. NO. 451-04044 451-04046 451-04048 451-04410 Kit K Kit L Kit M Kit N DESCRIPTION 4 x 4 Oz. with Kit 4 x 6 Oz. with Kit 4 x 8 Oz. with Kit 4 x 10 Oz. with Kit QTY./CASE 14 14 14 14

351 WHEEL BALANCING COUNTERACT BALANCING ECO BALANCE • Economical, high quality balancing bead, small enough to be injected through the valve stem ECO BALANCE XL • A large balancing bead solution designed for use with extreme balancing conditions, vehicles and tires, but compatible with all applications • No need for a special valve core • Pre-measured bags include ECO branded valve cores ASCOT NO. MFG. NO. 451-01203 451-01204 451-01206 451-01208 451-01210 451-01212 451-01214 451-01216 451-00603 451-00604 451-00606 451-00608 451-00610 451-00612 451-00614 451-00616 451-00618 451-00620 3 Oz. BP-EB 4 Oz. B-EB 6 Oz. B-EB 8 Oz. B-EB 10 Oz. B-EB 12 Oz. B-EB 14 Oz. B-EB 16 Oz. B-EB ECOXL3OZ ECOXL4OZ ECOXL6OZ ECOXL8OZ ECOXL10OZ ECOXL12OZ ECOXL14OZ ECOXL16OZ ECOXL18LB ECOXL20OZ DESCRIPTION ECO BALANCE (1 MM BEAD SIZE) 3 oz. Bag in Bag 4 oz. Bag in Bag 6 oz. Bag in Bag 8 oz. Bag in Bag 10 oz. Bag in Bag 12 oz. Bag in Bag 14 oz. Bag in Bag 16 oz. Bag in Bag ECO BALANCE XL (2.55 - 3 MM BEAD SIZE) 3 oz. Bag in Bag 4 oz. Bag in Bag 6 oz. Bag in Bag 8 oz. Bag in Bag 10 oz. Bag in Bag 12 oz. Bag in Bag 14 oz. Bag in Bag 16 oz. Bag in Bag 18 lb. Bucket 20 oz. Bag in Bag 96 92 64 52 40 36 32 28 96 92 64 52 40 36 32 28 N/A 24 QTY./CASE

WHEEL BALANCING ™ EQUAL FLEXX™ TIRE BALANCING IMI EQUAL FLEXX is an adaptive, internal wheel-end balancing solution that reduces fuel and tire costs by reducing vibration from the wheel end. Developed in partnership with the foremost experts in vibration analysis and testing, its soft, dry particles are engineered to continuously balance tires, creating a smoother ride and more even tire wear for the life of the tire. FLEXX will never damage the tire casing, wheel, or TPMS units. It does not void tire manufacturer warranties. TPMS TMC COMPATIBLE COMPLIANT BEFORE INSTALLING, READ THE QUANTITY CHART. SIMPLY DROP THE FLEXX BAG INTO THE TIRE BEFORE MOUNTING. DO NOT TEAR OR OPEN BAG. MOUNT THE TIRE ON THE WHEEL, INFLATE AND ADJUST THE AIR PRESSURE OF THE TIRE. INSTALL FILTERED VALVE CORE & IDENTIFICATION SLEEVE AVOID OVER-LUBRICATING BEAD OR INSTALLING FLEXX IN TIRES WITH SEALANT. CONTENTS ARE NON-TOXIC, ENVIRONMENTALLY SAFE & NON-FLAMMABLE. 352 2X MORE VIBRATION ABSORPTION POWER LOWEST ROLLING RESISTANCE ASCOT NO. MFG. NO. 451-32016 451-40004 451-40006 451-40008 451-40010 451-40012 451-40016 DESCRIPTION EQFXWC32 EQFXEC40 EQFXCC40 EQUAL FLEXX Drop In Bag (32) W pkgs. ( 16 Oz.) EQUAL FLEXX Drop In Bag (40) E pkgs. ( 4 Oz.) EQFXDC40 EQUAL FLEXX Drop In Bag (40) D pkgs. (6 Oz.) EQUAL FLEXX Drop In Bag (40) C pkgs. (8 Oz.) EQFXBC40 EQUAL FLEXX Drop In Bag (40) B pkgs. ( 10 Oz.) EQFXAC40 EQUAL FLEXX Drop In Bag (40) A pkgs. ( 12 Oz.) EQUAL FLEXX Drop In Bag (40) F pkgs. ( 3 Oz.) EQFXFC40 PRODUCTIVITY SMOOTHER RIDE FUEL COST TIRE WEAR

353 WHEEL BALANCING MAGNUM + TIRE BALANCING MAGNUM + TIRE BALANCING BEADS • MAGNUM+, the original balancing bead brand, is a high precision, continuously adapting alternative that will last for the life of the tires and beyond. • Our beads are made of tempered glass and are perfectly round, therefore they will never disintegrate and are reusable and recyclable. • Provides continuous and lasting tire balancing for standard, low-profile and wide-base medium truck tires and heavy duty light truck tires • No more time-consuming and expensive mechanical balancing, perfect self-adjusting balance in all your tires, less vehicle wear and tear, easier maintenance and less driver fatigue MAGNUM+ FLEET TUBS • Each tub is labeled and packaged for a specific premeasured insert bag • Bulk discounts apply to each tub size • Tubs are durable and reusable with a resealable lid • Complete with a full color label, tubs look great in retail settings and on delivery trucks • Eliminates wasted extra packaging and tubs are recyclable MAGNUM+ beads distribute themselves evenly inside the tire due to the centrifugal force. 451-72305 451-00200 LASTING TIRE BALANCE PERFECT SELF451-00200 ADJUSTING BALANCE ASCOT NO. MFG. NO. SAMPLE TIRE SIZE LT215/75/R15 451-00150 451-00200 451-00250 451-00300 451-00400 451-00500 451-06000 451-07000 LTP150 LTP200 MTP250 MTP300 MTP400 MTP500 DPP600 DPP700 LT235/85R16 33x12.50R15 245/75R22.5 11R22.5/11R24.5 12R24.5 365/80R22.5 425/65R22.5 QTY./CASE 36 24 24 18 12 12 6 6 ASCOT NO. RANGE 451-10003 451-15405 451-20605 451-25805 451-31005 451-40013 451-60021 451-72305 451-00008 NOM. WT. LFP100 INSERT™ 3 Oz. LFP150 INSERT™ 4-1/2 Oz. LFP200 INSERT™ 6-1/2 Oz. MFP250 INSERT™ 8-1/2 Oz. MFP300 INSERT™ 10-1/2 Oz. MFP400 INSERT™ 13 Oz. DFP600 INSERT™ 21 Oz. DFP700 INSERT™ 23-1/2 Oz. MBP8KG DESCRIPTION Fleet Tub – Contains 24 LTP100 Fleet Tub – Contains 24 LTP150 Fleet Tub – Contains 24 LTP200 Fleet Tub – Contains 22 MTP250 Fleet Tub – Contains 18 MTP300 Fleet Tub – Contains 14 MTP400 Fleet Tub – Contains 6 DPP600 Fleet Tub – Contains 6 DPP700 17.6 lb. / 8 kg Bulk Tub of Magnum + Balancing Beads QTY./ CASE 24 24 24 22 18 14 6 6 -

ALIGNMENT ALIGNMENT Alignment Tool Assortments Camber/Caster Tools Heavy Duty Alignment Automotive Alignment Equipment

355 ALIGNMENT ALIGNMENT TOOL ASSORTMENTS PASSENGER CAR ASSORTMENT BOARD SET • Board set includes the most popular shims, cam kits and adjustable strut plates • A “must have” for any shop performing 4 wheel alignments on passenger cars • Shipped with high-strength polymer display board • CONTAINS ONE OF EACH OF THE FOLLOWING: 66050, 66025, 66037, 72055, 81250, 81260, 81270, 81280, 81290, 84120, 87365 1-88270 ASCOT NO. MFG. NO. 251-88260 88260 DESCRIPTION Passenger Car Assortment Board Se A MUST HAVE FOR ANY SHOP INCLUDE DISPLAY BOARD LIGHT TRUCK/SUV SLEEVE ASSORTMENT BOARD SET • This great new board set includes the most popular parts for aligning today’s trucks and SUVs. Don’t be caught without the part that you need • Shipped with the polymer display board • CONTAINS ONE OF EACH OF THE FOLLOWING: 26012, 26014, 82380, 82385, 82390, 86250, 86325, 86350, 86375, 87385, 87420, 87500, 87520 251-88260 ASCOT NO. MFG. NO. 251-88270 88270 DESCRIPTION Light Truck/SUV Sleeve Assortment Board

ALIGNMENT CAMBER/CASTER TOOLS 23220 & 23230 SLEEVE SETS • Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on the new 4x4 F250 and F350 Super Duty trucks ASCOT NO. MFG. NO. 231-23220 23220 231-23230 23230 DESCRIPTION APPLICATIONS Complete Set FORD 4WD: 2005 & Up F250, F350 Super Duty; FORD RWD: 2005 & Up F250, F350 Solid Axle/Coil Spring Complete Set FORD RWD/4WD: 2005 & Up F450, F550 Coil Springs; CHEVY/ GMC 4WD: 2005 & Up Kodiak K4500, Topkick K5500 FORD 2 & 4WD CAMBER/CASTER TRUCK SLEEVES • Sleeves are widely used to adjust caster and/or camber on many Ford 2WD/4WD trucks • To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present • Sleeves allow for larger caster and camber changes which may be required on lowered and raised trucks • SET INCLUDES: Nine of the XRTM Camber/Caster truck sleeves ASCOT NO. MFG. NO. 231-23180 23180 DESCRIPTION APPLICATIONS Complete Set FORD 2WD:1987 & Up F350, 1987-96 F150, F250 (L/D 90 Bronco II, 1992 & Up E150, E250, E350, 1991-94 Explor 1989 -97 Ranger, 1999 & Up F250, F350 Super Duty; MAZD 2WD:1991-97 Navajo, Pickup; Ford 4WD:1991-94 Explor 1990 - 97 Ranger; MAZDA 4WD:1991-97 Navajo, Pick 231-23220 231-23230 356 PEDAL DEPRESSOR • An adjustable steel plate extends the length of the bar to put constant pressure on the brake pedal • CAUTION: Use only according to directions packaged with product ASCOT NO. MFG. NO. 231-77928 77928 DESCRIPTION Pedal Depressor TIE ROD ADJ WRENCH SET (4) • Adjust inner tie rods with this easy to use 4-piece wrench set • The wrenches feature spring loaded toothed jaws and sturdy grips to make toe adjustments quick and easy • This set of wrenches fits tie rods from 10.5 to 19mm • Individual tools are also available: 40850 fits 10.512mm rods, 40860 fits 12-14mm rods, 40870 fits 14-16mm rods, 40880 fits 16-19 mm rods ASCOT NO. MFG. NO. 231-40840 40840 DESCRIPTION Tie Rod Adj Wrench Set (4) STEERING WHEEL HOLDER • A must for proper alignments • This tool securely holds the steering wheel and it's covered hooks & base prevent damage to the steering wheel and seat • CAUTION: This product is not a locking device • Use only according to directions packaged with product ASCOT NO. MFG. NO. 231-77938 77938 DESCRIPTION Steering Wheel Holder

357 ALIGNMENT CAMBER/CASTER TOOLS HD ALIGNMENT CAM PINS • Replace bent, damaged, or lost factory guide pins with these heavy-duty knurled pins from SPC and your slotted cam will work like it should again • Every tech needs to have these easy to use pins on the shelf for when a GM 1500, 2500, or Colorado rolls on the rack • Kit includes 8 pins ASCOT NO. MFG. NO. 231-86326 86326 DESCRIPTION HD Alignment Cam Pins ALIGNMENT CAS/CAM BOLT KIT • Stock OE replacement cam/bolt kit for newer GM 1/2, 3/4, 1-ton truck and van applications • This kit allows both camber and caster adjustment to the upper control arm • Quick & simple installation • For additional change, see our bushings 86330 & 86350, or the adjustable ball joint 23960 for use in 3/4 and 1-ton applications ASCOT NO. MFG. NO. 231-86375 86375 DESCRIPTION Alignment Cas/Cam Bolt Kit ALIGNMENT CAS/CAM BOLT KIT • Replace corroded or damaged original equipment alignment cams on GM 2500/3500/4500 HD trucks and Chevy Colorados with this cam and bolt kit • SPC's replacement camber & caster cam kit includes a provision for 3/8" drive ratchet wrench when the bolt head is difficult to reach • Use part number 86326 HD GM alignment pins to replace the often abused or missing OE pins ASCOT NO. MFG. NO. 231-86376 86376 DESCRIPTION Alignment Cas/Cam Bolt Kit ALIGNMENT CAS/CAM BOLT KIT • Replace corroded or damaged original equipment alignment cams on GM and Chevy 1500 trucks with this cam and bolt kit • SPC's replacement camber and caster cam kit includes a provision for 3/8" drive ratchet wrench when the bolt head is difficult to reach • Use part number 86326 HD GM alignment pins to replace the often abused or missing OE pins ASCOT NO. MFG. NO. 231-86377 86377 DESCRIPTION Alignment Cas/Cam Bolt Kit 231-86377 EZ CAM XR (10MM-12MM-14MM-15MM-16MM-17MM-18MM) • Make a two-bolt strut adjustable up to ±1.75° camber with the EZCam™ from Specialty Products. Simply remove the upper bolt, install the EZCam, loosen the lower bolt, and dial in the required change. ASCOT NO. MFG. NO. 231-81240 231-81250 231-81260 231-81270 231-81280 231-81290 231-81295 81240 81250 81260 81270 81280 81290 81295 DESCRIPTION EZ CAM XR (10mm - 2) EZ CAM XR (12mm - 2) EZ CAM XR (14mm - 2) EZ CAM XR (15mm - 2) EZ CAM XR (16mm - 2) EZ CAM XR (17mm - 2) EZ CAM XR (18mm - 2)

ALIGNMENT CAMBER/CASTER TOOLS JEEP AND DODGE OFFSET BALL JOINT • Offset ball joint replaces the O.E. upper ball joint to provide up to 2° camber/caster change on several previously non-adjustable Jeep and Dodge vehicles • Comes with an installation template for accurate change ASCOT NO. MFG. NO. 237-23510 DESCRIPTION 23510 237-23520 237-23530 237-23540 23520 23530 23540 1/2˚ Positive Or Negative Change 1˚ Positive Or Negative Change 1-1/2˚ Positive Or Negative Change 2˚ Positive Or Negative Change FORD F150 KIT • Easily adjust camber and caster on F150s from ‘04 and up (including late model) and ‘07 & up Expeditions ASCOT NO. MFG. NO. 231-86250 86250 DESCRIPTION Ford F150 Kit APPLICATIONS FORD: 2004 & Up F150, 2007 & Up Expedition; LINCOLN: 2006 & Up Mark LT, 2007 & Up Navigator APPLICATIONS JEEP: 1984 & up 2WD/4WD Cherokee, Comanche, 1987 & up Wrangler; 1990 & up Renegade, 1984 & up 2WD/4WD downsize Wagoneer; 1993 & up Grand Cherokee, DODGE: 1994 -2001 BR1500 4WD & BR2500 (L/D) Pickups 237-23520 358 231-86250 ALIGNMENT CAS/CAM BOLT KIT • This heavy-duty cam-bolt kit was specifically designed for the extreme Raptor & F-150 user • Whether you are a energetic Raptor driver or abuse your F-150 in the fields and on the job site, you may have found that the OE bolts slip or that a single cam option does not hold alignment. This upgraded cam kit features two cams and bosses per bolt • The two cams will keep your bolt square and make adjustments easier while the new bolt and low friction finish achieve 25% more clamp load than the OE hardware • Some drilling is required to accommodate the second boss plate • This kit is sold per wheel and fits Raptors, non-Raptor F-150's and related SUVs ASCOT NO. MFG. NO. 222-86252 86252 DESCRIPTION Alignment Cas/Cam Bolt Kit NISSAN CAM BOLT KIT • FRONT ADJUSTMENT RANGE: Camber/Caster ±2.00 degree • 1 kit per wheel requir ASCOT NO. MFG. NO. -87520 DESCRIPTION 222-87520 87520 Nissan Cam Bolt Kit TOYOTA BOLT KIT • FRONT ADJUSTMENT RANGE: Camber/Caster ± 1.50 degree • 1 kit per wheel required ASCOT NO. MFG. NO. APPLICATIONS 222-25430 222-25435 222-25440 222-25445 25430 25435 25440 25445 TOYOTA 4WD: 1995-04 Tacoma; TOYOTA RWD: 1998-04 Tacoma PreRunner; TOYOTA 4WD&RWD: 1996-02 4-Runner LEXUS AWD: 2003-09 GX; TOYOTA RWD: 2005 & up Tacoma PreRunner; TOYOTA 4WD: 2005 & Up Tacoma; TOYOTA 4WD&RWD: 2007-09 FJ Cruiser, 2003-09 4Runner LEXUS AWD: 2010 & Up GX; TOYOTA 4WD&RWD: 2010 & Up FJ Cruiser, 2010 & Up 4Runner TOYOTA: 01-07 Sequoia, 99-06 Tundra Toyota Bolt Kit

359 ALIGNMENT CAMBER/CASTER TOOLS REAR ADJUSTABLE CAMBER ARM 222-67476 • Get your 10th generation Civic ready for the track with SPC's forged aluminum adjustable rear camber arm • SPC forged aircraft grade aluminum arm weigh than the OE arm it will replace • The arm is built with SPC's xAxis sealed flex join to reduce compliance • Its unique adjustment design permits on-car adjustmen of ±3.0° camber • Whether you need negative camber and reduced complianc for the track or want to get back to OE specifications this is the arm for you ASCOT NO. MFG. NO. 222-67476 67476 DESCRIPTION Rear Adjustable Camber Arm REAR ADJUSTABLE CAMBER ARM 222-67420 • These high strength forged rear arms are perfect for tuners or installers that need extended camber ranges on these popular platforms • Complete with O.E. style bushings installed for a factory type ride ASCOT NO. MFG. NO. 222-67420 67420 DESCRIPTION Rear Adjustable Camber Arm REAR CAMBER ARM EACH • Add rear camber adjustability to the Toyota Highlander with this adjustable camber arm • With ±3° of available adjustment, this arm will get back to factory specification to ensure proper tire wear, handling, and ride quality • Non-handed rear upper control arm is equipped with a bonded rubber inner bushing and xAxis Sealed Flex Joint outer to match OE ride quality and performance ASCOT NO. MFG. NO. 222-67817 67817 DESCRIPTION Rear Camber Arm Reach 222-67817 REAR ADJUSTABLE CAMBER ARM 222-67820 • Make rear camber adjustable on many late model Toyotas with this camber arm from SPC • The forged steel design features easy on car adjustability and an OE style bonded rubber bushing to maintain factory ride quality • Sold each, order two arms to make the rear fully adjustable • Rear toe cams frozen? Add SPC# 25370 replacement toe cams to restore adjustability and dial in the proper alignment ASCOT NO. MFG. NO. 222-67820 67820 DESCRIPTION Rear Adjustable Camber Arm

ALIGNMENT CAMBER/CASTER TOOLS CHRYSLER/DODGE FRONT CONTROL ARM • Arms fit both the right and left side • Camber adjustment ± 2.0 degrees • Caster adjustment ± 1.5 degrees • 1 per wheel required ASCOT NO. MFG. NO. APPLICATIONS 222-66040 222-66045 222-66047 66040 66045 66047 CHRYSLER: 2005-2008 300 RWD; DODGE: 2006 - 2008 Challenger, 2006 - 2008 Charger RWD, 2005 - 2008 Magnum RWD CHRYSLER: 2009 & Up 300; DODGE: 2009 & Up Challenger, 2009 & Up Charger RWD CHRYSLER: 2005 & Up 300 RWD; DODGE: 2006 & Up Charger AWD, 2005 - 2008 Magnum AWD HONDA CIVIC REAR ADJUSTABLE CONTROL ARM • SPC's unique adjustment design permits on car adjustment of ±3.0° camber and is adjustable for life • SPC's forged steel design adds adjustment to the arm without a weight penalty vs. the OE arm it will replace • REAR ADJUSTMENT RANGE: Camber ± 3.0 degrees • 1 per wheel required ASCOT NO. MFG. NO. APPLICATIONS 222-67467 67467 2016 & Up Honda Civic (Incl. Si/Hybrid) LOWER CONTROL ARM CAMBER KIT • Even with the suspension loaded, this kits makes changes of up to +/-1.5 degree camber/caster fast and easy ASCOT NO. MFG. NO. 223-82360 82360 DESCRIPTION Lower Control Arm Camber Kit REAR ADJUSTABLE LOWER CONTROL ARM • This hi-strength adjustable lower rear camber arm provides ± 2.0 degrees of change for the popular BRZ, FR-S, WRX and Impreza • REAR ADJUSTMENT RANGE: Camber ± 2.0°, Toe 1.5° fixed • 1 per wheel required • RECOMMENDED TOOLS: 67647 Bushing Sleeves, 72509 Ball Joint Press ASCOT NO. MFG. NO. 222-67660 67660 DESCRIPTION Rear Adjustable Lower Control Arm 360 ADJ REAR CAMBER BALL JOINT 226-23450 • Use this sliding ball joint to adjust camber on the rear of the Acura / Honda for improved handling and tire wear • The OE quality ball joint is easily installed and corrects camber angles ±3° ASCOT NO. MFG. NO. 226-23450 23450 DESCRIPTION ADJ Rear Camber Ball Joint PERFORMANCE BALL JOINT PRESS SET • Can remove the ball joint from the front upper control arm without removing the arm from the vehicle ASCOT NO. MFG. NO. DESCRIPTION 227-40920 40920 Performance Ball Joint Set 227-40920

361 ALIGNMENT CAMBER/CASTER TOOLS FULL CONTACT DUAL ANGLE EZ SHIMS™ • Full contact/dual angle • Corrects toe and camber with one shim ASCOT NO. MFG. NO. 221-75200 221-75400 221-75600 221-75800 75200 75400 75600 75800 DESCRIPTION APPLICATIONS Blue Grey Yellow Red Audi, Chevrolet/Geo, Chrysler, Dodge, Eagle, Isuzu, Plymouth, Volkswagen Acura, Audi, Buick, Chevrolet, Chrysler, Dodge, Ford, Honda, Mercury, Nissan, Oldsmobile, Plymouth, Pontiac Buick, Cadillac, Chevrolet, Chrysler, Geo, Olds, Pontiac, Scion, Toyota, VW Buick, Cadillac, Chevrolet, Geo, Lexus SP, Oldsmobile, Pontiac, Toyota FORD/DODGE TRUCK ADJUSTABLE CAMBER/CASTER BUSHING • Camber and caster adjustment up to +/- 2-3/4° • 1 bushing per wheel ASCOT NO. MFG. NO. 231-00532 532 DESCRIPTION Ford/Dodge Truck Adjustable Camber/Caster Bushing 231-00535 535 Ford Downsize Truck Adjustable Camber/Caster Bushing WHEEL SPREADER BAR • Take the play out of front wheels during alignment! Place this spring-loaded pressure bar between the tires to assure a more accurate alignment. A must for Mercedes vehicles. ASCOT NO. MFG. NO. 247-99918 99918 DESCRIPTION Wheel Spreader Bar STEERING KNUCKLE SPREADER • Use this tool to expand steering knuckles safely and easily • This tool is perfect for single bolt strut vehicles • Pry bars can damage the knuckle, but this tool allows safe expansion with the tool adjustmen nut • Designed to operate within a 4.4 - 10mm range, this expansion tool will fit most makes and models ASCOT NO. MFG. NO. 247-37975 37975 DESCRIPTION Steering Knuckle Spreader FORD COMBINATION SLEEVE PULLER • Pulls both O.E. and most aftermarket camber/caster sleeves quickly and efficien the ears of the sleeve • Heat treated high strength steel • Single-unit design with no loose parts ASCOT NO. MFG. NO. 247-77880 77880 DESCRIPTION Ford Combination Sleeve Puller APPLICATIONS FORD: Twin I-Beam w And Lower Ball Join FASTRAX™ COMPLETE ADJUSTABLE CAMBER/CASTER GA • Portable, hands-free alignment can be done quickly and easily with the FasT Adjustable Camber/Caster Gauge stock or Specialty Product’s sliding ball joints ASCOT NO. MFG. NO. 223-91000 91000 WHEEL SIZE 13 "- 18" FASTRAX™ CAMBER/CASTER GAUGE • Add quick alignment checks to your fleet PMs • Save tire wear & fuel costs ASCOT NO. MFG. NO. 223-91040 91040 WHEEL SIZE 21" - 26" APPLICATIONS FORD: 1980-1985 4WD F150 and Bronco, 1980-2000 4WD F250 and F350; DODGE: 1994-1999 2WD/4WD 2500 Trucks, 1994-1999 4WD 3500 Trucks FORD: 1983-1990 4WD Downsize Trucks 231-00532 EZ SHIMS™ 223-91040

ALIGNMENT HEAVY DUTY ALIGNMENT TRUCK AXLE SHIMS (HEAVY DUTY ZINC ALLOY) • Available in 1/2° changes up to a 4° caster change, either positive or negative • Packaged six per box • Any solid axle 2 or 4 wheel drive vehicle ASCOT NO. MFG. NO. 243-00891 243-00892 243-00893 243-00894 243-00895 243-00896 243-00897 243-00898 89199 89299 89399 89499 89599 89699 89799 89899 WIDTH 3"-3-1/2"-4" 3"-3-1/2"-4" 3"-3-1/2"-4" KENWORTH AIR GLIDE SPACER FOR EIGHT BAGGERS ASCOT NO. MFG. NO. THICKNESS DEGREE TAPER 1/2˚ 1˚ 1-1/2˚ 3"-3-1/2"-4" 2˚ 3"-3-1/2"-4" 3"-3-1/2"-4" 3˚ 3"-3-1/2"-4" 2-1/2˚ TANDEM ALIGNMENT SET 3-1/2˚ 3"-3-1/2"-4" 4˚ • These alignment angle shims are now available in a heavy duty metal box to help you organize all of your shims • Packaged with a large variety of shims and an organization chart inside the lid to make reordering and organization of shims quick and easy PETERBILT AIR LEAF ADJUSTING SHIM 246-35010 ASCOT NO. MFG. NO. 246-35010 246-35011 246-35012 35010 35011 35012 SIZE 1/32" 1/16" 1/8" QTY. 6 6 6 FREIGHTLINER ADJUSTING SHIMS I.H.C. TORQUE ARM SHIMS ASCOT NO. MFG. NO. SIZE 246-35020 ASCOT NO. MFG. NO. 246-35020 246-35021 246-35022 35020 35021 35022 SIZE 1/32" 1/16" 1/8" QTY. 6 6 6 246-35040 246-35041 246-35042 35040 35041 35042 1/32" 1/16" 1/8" 246-36000 ASCOT NO. MFG. NO. 246-36000 36000 DESCRIPTION Tandem Alignment Set 241-35001 241-35002 241-35003 241-35004 241-35005 241-35006 241-35007 35001 35003 35004 35006 35007 1/32" 35002 1/16" 1/8" 1/4" 35005 1/2" 3/4" 1" QTY. 6 6 6 6 6 6 6 362 VOLVO/WHITE TANDEM SHIMS ASCOT NO. MFG. NO. SIZE 246-35030 246-35031 246-35032 35030 35031 35032 1/32" 1/16" 1/8" QTY. 6 6 6 QTY. 6 6 6

363 ALIGNMENT HEAVY DUTY ALIGNMENT SINGLE SLOT TANDEM TRUCK SHIMS ASCOT NO. MFG. NO. SIZE 246-35060 246-35061 246-35062 35060 35061 35062 1/32" 1/16" 1/8" QTY. 6 6 6 CANYON/COLORADO SOCKET • This special grooved socket fits over the end of the bolt allowing the technician to turn the alignment cams to change alignment angles after loosening the lock nut ASCOT NO. MFG. NO. 236-45938 45938 FREIGHTLINER SHIMS FOR AIR GLIDE SUSPENSION ASCOT NO. MFG. NO. 246-35070 246-35071 246-35072 35070 35071 35072 SIZE 1/32" 1/16" 1/8" 6 6 DESCRIPTION Canyon/Colorado Socket FORD SUPER DUTY TIE ROD SLEEVE ADJUSTER • Extra long bar gives you maximum leverage to loosen rusted sleeves without injuring your knuckles • 8-position tool allows 360° rotation without removing the adjuster block from the sleeve ASCOT NO. MFG. NO. 236-77350 77350 PETERBILT/KENWORTH FLEX AIR SUSPENSION SHIMS • Adjust thrust angle and toe by shimming the torque arms ASCOT NO. MFG. NO. 246-36010 246-36011 246-36012 SIZE 36010 36011 36012 1/32" 1/16" 1/8" QTY. 6 6 6 DESCRIPTION Ford Super Duty Tie Rod Sleeve Adjuster AIR BLADDER CAMBER ADJUSTING TOOL • Simply loosen the strut mount bolts, place the adjuster between the tire and strut, and inflate • INCLUDES: A specially designed, puncture resistant air bladder, 2’ air hose, a low pressure pop-off valve to prevent overinflating and an air control valve for inflating and controlled deflating 228-61400 S-CAM BUSHING EXTRACTOR 246-36010 ASCOT NO. MFG. NO. 247-91860 91860 DESCRIPTION S-Cam Bushing Extractor H/D STEEL WHEEL RIM STRAIGHTENING TOOL • For quick and easy removal of indentations on wheel flanges and rims of most vehicles GM UPPER CONTROL ARM PUNCH • For removing the alignment inserts on the upper control arm alignment brackets without damaging the alignment bracket • Lubricate before use • Not for use with impact wrenches (air tools) 247-74910 ASCOT NO. MFG. NO. DESCRIPTION APPLICATIONS 247-74910 74910 GM Upper Control Arm Punch 247-08130 ASCOT NO. MFG. NO. 247-08130 81309 DESCRIPTION H/D Steel Wheel Rim Straightening Tool FORGED TORSION BAR TOOL SET • Designed for GM, Dodge, and Ford torsion bar suspensions—including 2011-UP GM HD 8-lug models • The included Ford/Dodge adapter expands versatility across multiple applications, while the black e-coated finish ensures lasting protection • This is the easiest to use and most durable torsion tool set on the market CHEVROLET/GM: 1989 - 1998 2WD/4WD C & K Series 1/2, 3/4 & 1 Ton Trucks,1991 & Up AWD Astro Vans & AWD Safari Vans ASCOT NO. MFG. NO. 247-40230 40230 DESCRIPTION Forged Torsion Bar Tool Set ASCOT NO. MFG. NO. 228-61400 DESCRIPTION DOWTC614 Air Bladder Camber Adjusting Tool 236-77350 236-45938

ALIGNMENT AUTOMOTIVE ALIGNMENT EQUIPMENT ARGOS X FULL TOUCHLESS ALIGNMENT SYSTEM The ARGOS X is the most advanced automotive alignment system available. Touchless system provides all alignment reading in under a minute. No wheel clamps or targets to attach to the rims. No roll-back compensation required. No moving parts. Compatible with most alignment lifts. Suitable for all passenger cars and light commercial vehicles. 364 ASCOT NO. MFG. NO. 203-35001 DESCRIPTION ARGOS X ARGOS X Full Touchless Alignment System DWA3500 3D HIGH DEFINITION WHEEL ALIGNMENT SYSTEM DWA3500 is the new 3D wheel alignment system for cars and light commercial vehicles, with a completely redesigned cabinet with drawers and housings for printer and accessories, an easy accessibility for maintenance and an advanced software. The 3D camera support beam is motorized and fully automated. Camera beam height is automatically adjusted to the height of lift. The software system, entirely developed by CEMB, guides the user through all the alignment operations with clear and user-friendly graphics. ASCOT NO. MFG. NO. 203-35000 DESCRIPTION DWA3500 DWA3500 Wheel Alignment System with Automatic Camera Beam

365 ALIGNMENT AUTOMOTIVE ALIGNMENT EQUIPMENT AUTOMATED ADAS CALIBRATION & WHEEL ALIGNMENT SYSTEM An all-in-one ADAS calibration, wheel alignment, and advanced diagnostics system featuring robotic target positioning and laser-guided accuracy. Designed for efficiency, precision, and repeatability, it’s the ideal solution for modern service centers. ASCOT NO. MFG. NO. 203-01000 IA1000 DESCRIPTION Automated ADAS Calibration & Wheel Alignment System 203-01000 AUTOMATED ADAS CALIBRATION & WHEEL ALIGNMENT SYSTEM State-of-the-art and versatile wheel alignment pre-check and ADAS calibration system engineered for both in-shop and mobile applications – move from bay to bay and shop to shop. ASCOT NO. MFG. NO. 203-00700 IA700 DESCRIPTION Modular ADAS Calibration System 203-00700 ADAS CALIBRATION & WHEEL ALIGNMENT SYSTEM All systems health check, digital vehicle inspection, 3D wheel alignment, and step-by-step ADAS calibration instructions in a single system, investment, and workflow. ASCOT NO. MFG. NO. 203-00900 IA900 DESCRIPTION ADAS Calibration & Wheel Alignment System 203-00900

ALIGNMENT HEAVY DUTY ALIGNMENT 6500 3D WHEEL ALIGNER • The CWA 6500 is for high-volume or luxury vehicle shops needing advanced features. It includes every aligner feature and accessory essential to perform wheel alignments easily and scales with your business. EVO ALIGNMENT CHECK TOWERS • Two towers instantly identify wheel alignment, steering, suspension problems, and captures images of wheel condition 366 ASCOT NO. MFG. NO. 443-80001 DESCRIPTION 800FLEVO Evo Alignment Check Towers PLUS ALIGNMENT CHECK TOWERS ASCOT NO. MFG. NO. 443-06500 DESCRIPTION 8006500 3500 3D Wheel Aligner • Two PLUS towers instantly identify wheel alignment, steering, suspension problems, while capturing 360 degree video of body vehicle condition. Comes with management and customer view dashboards. 6000 3D WHEEL ALIGNER • Ideal for lower volume shops, the CWA 6000 3D Aligner is the perfect, simple, entry level alignment machine that’s compact and suitable for shops with challenging layouts • It’s a budget conscious solution that also comes with basic accessories you need to start performing alignments. ASCOT NO. MFG. NO. 443-80002 DESCRIPTION 800FLPLUS Evo Alignment Check Towers BODY GUARD • Protect your shop from vehicle damage fraud claims with HD cameras and LED lights that capture vehicle condition upon entry and exit ASCOT NO. MFG. NO. 443-06000 DESCRIPTION 8006000 6000 3D Wheel Aligner ASCOT NO. MFG. NO. 443-85221 443-85220 443-85222 443-85223 DESCRIPTION 85200021 85200020 85200022 85200023 Bodyguard Inspection, Indoor, Standard Bodyguard Inspection, Outdoor, Tall Bodyguard Inspection, Outdoor, Standard Bodyguard Inspection, Tall

367 AUTO & FLEET SERVICE AUTO & FLEET SERVICE Battery Chargers & Testers Lubrication & Sealants Exhaust Hoses & Tailpipe Adapters Bench Grinders & Shop Vises Pliers & Screwdrivers Shop Cleaners & Brushes Shop Lights Service Stickers Tire Displays & Carts Interior Protection Products Studding Equipment Drains, Pumps & Fluid Exchange Safety Products Wheel Chocks Mechanic's Gloves BUYER'S GUIDE ASCOT SUPPLY CORPORATION AUTO & FLEET SERVICE

AUTO & FLEET SERVICE BATTERY CHARGERS & TESTERS PROSERIES 12V 2200 JUMP STARTER & PORTABLE POWER STATION ASCOT NO. MFG. NO. DESCRIPTION 341-00165 DSR165 ProSeries 12V 2200 Jump Starter & Portable Power Station 368 PROSERIES 1800 PEAK AMP JUMP STARTER ASCOT NO. MFG. NO. DESCRIPTION 341-00119 341-00119 DSR119 ProSeries 1800 Peak Amp Jump Starter 12V 250A PROSERIES BATTERY CHARGER/ENGINE STARTER ASCOT NO. MFG. NO. DESCRIPTION 341-00121 DSR121 12V 250A ProSeries Battery Charger/Engine Starter 6/2/40/20/250/125A 12/24V AUTOMATIC BATTERY CHARGER/ENGINE STARTER ASCOT NO. MFG. NO. DESCRIPTION 341-01352 SC1352 6/2/40/20/250/125A 12/24V Automatic Battery Charger/Engine Starter 6/12V 275A PROSERIES BATTERY CHARGER/ENGINE STARTER 341-01352 ASCOT NO. MFG. NO. DESCRIPTION 341-00122 DSR122 6/12V 275A ProSeries Battery Charger/Engine Starter

369 AUTO & FLEET SERVICE EXHAUST HOSES & TAILPIPE ADAPTERS CRUSHPROOF EXHAUST VENTILATION SYSTEM DOOR PORTS Y-CONNECTORS FLARELOK® HOSES • For use with cars and small trucks • Flared end on each length to permit connection of two or more lengths of same size hose 391-00130 391-00125 391-00240 391-00230 SPLICE CONNECTORS ELBOWS 391-21040 391-20040 OVERHEAD DUCT 391-00430 391-00330 Y-ASSEMBLY TAILPIPE ADAPTERS • Crushproof offers a complete line of accessory items 391-22040 ASCOT NO. 391-00125 391-00130 391-00140 391-00225 391-00230 391-00240 391-20030 391-20040 391-20050 391-20060 391-21025 391-21030 391-21040 391-00325 391-00330 391-00340 391-00350 391-00425 391-00430 391-22150 391-22160 391-22030 391-22040 391-22050 391-52500 391-53000 391-54000 MFG. NO. DF25 ADF30 ADF40 RY25 RY30 AY40 AC30 AC40 AC50 AC60 SP25 SP30 SP40 AEL25 AEL30 AEL40 AEL50 EB25 EB30 OC50D AC-60-OC OC30 OC40 OC50 YA250 YA300 YA400 DESCRIPTION 2-1/2" Rubber Door Port 3" Aluminum Door Port 4" Aluminum Door Port 2-1/2" Rubber Y-Connector 3" Rubber Y-Connector 4" Aluminum Y-Connector 3" Aluminum Splice Connector 4" Aluminum Splice Connector 5" Aluminum Splice Connector 6" Aluminum Splice Connector 2-1/2" Rubber Splice Connector 3" Rubber Splice Connector 4" Rubber Splice Connector 2-1/2" Aluminum Elbow 3" Aluminum Elbow 4" Aluminum Elbow 5" Aluminum Elbow 2-1/2" Rubber Elbow 3" Rubber Elbow 5" Overhead Duct Connector W/Damper 6" Overhead Duct Connector 3" Overhead Duct Connector 4" Overhead Duct Connector 5" Overhead Duct Connector 2-1/2" Y-Assembly 3" Y-Assembly 4" Y-Assembly ASCOT NO. MFG. NO. 391-93000 391-90250 391-90300 391-90350 391-90400 391-90600 TPA3000 F250 F300 F350 F400 DSR600 DESCRIPTION Split Adapter Straight W/ Hook & Chain Straight w/ Hook & Chain Straight w/ Hook & Chain Straight w/ Hook & Chain Stack Adapter 391-90606 DSR600-6 Stack Adapter 391-91000 UNA1000 391-90475 F475 391-90575 391-91250 391-91300 F575 RA250 RA300 Narrow Dual Oval Adapter (2.5" x 6") Oval Adapter (3.5" x 8.5") Bell w/Snaps Bell w/Snaps TAILPIPE STYLE Separated Single Single Single Single Diesel Stack Diesel Stack 2.5" TAILPIPE SIZE Up To 2-1/2" Up To 2-1/2" Up To 3-12/" Up To 5-1/2" Up To 5-1/2" 2.5" HOSE ID 3" Up To 2" 2-1/2", 3", 3-1/2" 2-1/2",3", 3-1/2" Up To 3" 2-1/2", 3", 3-1/2" 3-1/2", 4", 5 4", 5" 5", 6" 3" Twin Oval 2", 5-1/2" 3", 4" Twin Oval 2", 5-1/2" 3", 4" All All All All 3" 3" 391-53000 ASCOT NO. MFG. NO. 391-15250 391-15300 391-15350 391-15400 FLT250 FLT300 FLT350 FLT400 DESCRIPTION 2-1/2" x 11' Flarelok® Hose 3" x 11' Flarelok® Hose 3-1/2" x 11' Flarelok® Hose 4" x 11' Flarelok® Hose 391-15350

AUTO & FLEET SERVICE INDUSTRIAL BENCH GRINDERS • UL listed motor • Pre-lubricated and enclosed ball bearings • Cast iron wheel guards and dust vents • One piece quick adjusting spark guards • Large eye shields with quick adjustment • Adjustable tool rests • Heavy duty guarded toggle switch on 8" and 10" • Fine and coarse vitrified wheels included • Rubber mounts prevent movemen BENCH GRINDERS & SHOP VISES TRADESMAN VISES • Fully sealed one-piec assembly for a lifetime of smoo operation • Precision machined slide bar to eliminate mo in front jaw regardless of opened position • 60,000 PSI ductile iron body, jaw & base • Machined steel serrated jaws with black phosphate coating for incr and corrosion resistance • Lifetime Warranty 311-28806 311-77101 311-77172 ASCOT NO. MFG. NO. 311-77101 311-77102 311-77103 311-77172 577101 577102 577103 577172 DESCRIPTION JBG-6A: Bench Grinder, 6" Wheel JBG-8A: Bench Grinder, 8" Wheel JBG-10A: Bench Grinder, 10" Wheel JPS-2: Optional Pedestal BENCH GRINDER MODELS AT A GLANCE Model No. JBG-6A Shaft Dia. (In.) ASCOT. No. 311-77101 1/2 Wheel Dia. (Dia. x W/ In.) 6 x 3/4 Wheel Speed (RPM) Wheel Grits 3450 36/60 Motor (HP) 38 5/8 8 x 1 3450 36/60 1/2HP, 115V, 1Ph 1HP, 115V, 1Ph 60 ASCOT NO. MFG. NO. 311-28805 311-28806 311-28807 311-28808 JAW WIDTH 28805 4-1/2" 28806 5-1/2" 28807 6-1/2" 28808 8" OPENING CAPACITY MAX. 3-1/2" 5" 6" 6-3/4" THROAT DEPTH 3-1/2" PIPE JAW CAPACITY WEIGHT 1/4" - 3-1/2" 42 lb. 3-5/8" 3/8" - 3-1/2" 42 lb. 4-1/4" 5" 3/8" - 4-1/2" R 3/8" - 4" 42 lb. 111 lb. 370 JBG-8A 311-77102 JBG-10A 311-77103 PROFESSIONAL SHOP VISES 1 10 x 1 1725 24/46 1-1/2HP, 115V, 1Ph Overall Dim. (LxWxH/ In.) 18 x 10-1/2 x 8-1/2 19 x 12-1/2 x 10 24-1/2 x 12-1/4 x 13 Net Weight (Lb.) 110 6" SWIVEL BASE BENCH VISE • Heavy duty 30,000 PSI castings for long lif added strength • S rotates 360° and has double lockdowns ensuring maximum stability • Powder coat paint resists scratches and provides a tough dur finish • Replaceable har steel top and pipe jaws ASCOT NO. MFG. NO. 311-21500 21500 JAW WIDTH 6" • Cast iron jaw with heavy internal ribs for added strength. Pipe jaws are permanently cast in for greater channel strength • Cast iron back jaw designed for exceptional alignment with the front jaw • “V” notched, replaceable/ reversible jaws made of carbon steel and heat treated for extra strength • Specially designed spring loaded handle and screw guarantees quick jaw response • Front jaw beam covers and protects screws • Steel handle balls forged from handle stock • Lifetime Casting Warranty 311-64055 311-64800 311-21500 THROAT DEPTH 4-1/8" PIPE CAP. 1/4 - 3-1/2 WT. 69.35 lb. ASCOT NO. 311-64055 311-64065 311-64650 311-64800 MFG. NO. JAW WIDTH JAW OPENING 64055 5-1/2" 6-1/2" 64065 6-1/2" 64650 6-1/2" 64800 8" 7-1/2" 7"-10" 8"-11" THROAT DEPTH 3-3/16" 3-3/4" PIPE CAP. 1/8" 1/8"-2-1/2" 3-3/16" 1/8"-2-1/2" 3-3/4" 1/8"-3" WEIGHT 30 lb. 41 lb. 50 lb. 74 lb.

371 AUTO & FLEET SERVICE BENCH GRINDERS & SHOP VISES 6” SWIVEL BENCH VISE • Replaceable hardened steel serrated jaws • Built in pipe jaws 2-1/2” capacity • 6” Maximum opening 3-1/2” Throat depth • Large anvil surface • 360° swivel base with 2 locking handles 311-03942 8” SWIVEL BENCH VISE • Replaceable hardened steel serrated jaws • Built in pipe jaws 3-1/2” capacity • 8” Maximum opening 4” Throat depth • Large anvil surface • 360° swivel base with 2 locking handles ASCOT NO. 311-65005 MFG. NO. 65005 JAW WIDTH 5" JAW OPENING 5" THROAT DEPTH 2.5" INDUSTRIAL DUTY BENCH VISES • 360º swivel base • Machined base plate for smooth swivel • Heavy-duty jaw beam covers screw • Built-in anvils • “V” notched, replaceable/reversible jaws made of carbon steel and heat-treated for extra strength, diamond cut on one side – smooth on the other • Gear-type locking system with double lock-down bolts – locks vise securely in position PIPE CAP. 2" WEIGHT 37.3 lb. MULTIPURPOSE BENCH VISE • 360º swivel base • Machined base plate for smooth swivel • Heavy-duty jaw beam covers screw • Built-in anvils • “V” notched, replaceable/reversible jaws made of carbon steel and heat-treated for extra strength, diamond cut on one side – smooth on the other • Gear-type locking system with double lock-down bolts – locks vise securely in position 311-03943 ASCOT NO. 311-65004 311-63005 311-63006 311-63008 63004 63005 63006 4" 5" 6" 63008 8" MECHANICS PRO VISES 6” HD SWIVEL BENCH VISE • Replaceable Hardened Steel Serrated Jaws • Built in pipe jaws 3” capacity • 6” maximum opening 4” Throat Depth • Large anvil surface • 360° Swivel Base with 2 locking handles 311-03948 ASCOT NO. MFG. NO. 311-03942 311-03943 311-03948 3942 3943 3948 JAW OPENING 6” 8” 6” THROAT DEPTH 3-1/2” 4” 4” WEIGHT 44 68 66 ASCOT NO. MFG. NO. 311-28810 311-28811 311-28812 311-28813 311-28814 JAW WIDTH 28810 4-1/2" 28811 5-1/2" 28812 6-1/2" 28813 28814 8" 10" OPENING CAPACITY MAX. 4" 5" 6" 8-1/2" 12" THROAT DEPTH 3-1/2" 3-5/8" 4-3/8" 4-1/2" 5-1/4" • Enclosed Spindle for smoo operation • Precision machined slide bar to eliminate movemen jaw regardless of opened position • Needle roller thrust bearing to easily apply and release clamping force • 60,000 PSI Jaw and Base • Lifetime Warr 311-28811 PIPE JAW CAPACITY WEIGHT 1/4" - 3" 31 lb. 1/4" - 3" 38 lb. 1/4" - 4" 56 lb. 1/2" - 4" 83 lb. 1/2" - 5" OPENING 5" 6" 8" 9" 2.9" 3.25" 3.6" 4.5" 1/2"-3" 3/4"-3.5" 3/4"-4" WEIGHT 20.9 lb. 25.7 lb. 40.2 lb. 57.2 lb. MFG. NO. JAW WIDTH JAW THROAT DEPTH PIPE CAP. 1/2"-2" 115 lb.

AUTO & FLEET SERVICE PLIERS & SCREWDRIVERS 8-PIECE PROFESSIONAL SCREWDRIVER SET • Includes 5 flat tip drivers and 3 Phillips tip drivers: SLOTTED: 3/8" x 8", 5/16" x 6", 1/4" x 4", 3/16" x 3", 1/4" x 1-1/2" PHILLIPS: #2 Phillips x 4", #1 Phillips x 3", #2 Phillips x 1-1/2" • Black handles • Hardened chrome vanadium shafts • Vapor blasted magnetic tips • Packaged in molded plastic tray for storage • Hex bolsters for extra turning power 5 PC. LOCKING PLIER SET • Fast tool setup and more locking force for the professional technician • Set includes: 5" curved jaw, 7" curved jaw, 10" straight jaw & 6" long nose locking pliers in an Ascot pouch • Features hardened jaws for more gripping power, and forged alloy steel for maximum durability • Nickel plated; jaw and handle is chrome molybdenum • Made in Taiwan 372 ASCOT NO. MFG. NO. 319-19800 19800 DESCRIPTION 8-Piece Professional Screwdriver Set LOCKING JAW PLIERS • Curved jaw puts tremendous pressure on four points of any style nut or bolt head; includes convenient wire cutter • Ideal for tightening, clamping, twisting and turning • Turn screw to adjust pressure and fit work; stays adjusted for repetitive use • Constructed of high-grade heattreated alloy steel for maximum toughness and durability • Guarded release trigger quickly unlocks and protects from accidental release ASCOT NO. MFG. NO. 319-00005 DESCRIPTION NS-5PCSET Ascot 5 Pc. Locking Plier Set 319-01023 319-01024 Ascot No. Mfg. No. 319-01023 319-01024 Description AS102L3 AS102L3S 10" Curved Jaw Locking Pliers 10" Straight Jaw Locking Pliers

373 AUTO & FLEET SERVICE PLIERS & SCREWDRIVERS CHANNELLOCK PLIERS ASCOT CUTTING PLIERS • Laser treated cutting edges perform better and last longer • Precision-machined knife and anvil style cutting edges ensure perfect mating for superior performance and longevity • Forged high carbon steel for maximum strength and durability is specially coated for ultimate rust prevention comfort grips • MADE IN TAIWAN • 100% MADE IN USA • LASER heat-treated cutting edges perform better and last longer • FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention • CHANNELLOCK BLUE® grips for comfort 319-01337 319-01447 319-01358 ASCOT NO. MFG. NO. 319-01337 319-01358 319-01447 A337 A358 A447 DESCRIPTION 7" Diagonal Cutting Pliers 8" Cutting Plier With End Cutter 7.75" Curved Diagonal Cutting Pliers PROFESSIONAL 4 PC. PR • Chrome vanadium s oxide finish resists corr x 12”, 7/16” x 18” & 7/16” x 2 ASCOT NO. MFG. NO. 319-00337 319-00357 337 357 DESCRIPTION 7" High Leverage Diagonal Cutting Plier 7" End Cutting Plier 319-76403 ASCOT NO. MFG. NO 319-76403 AS-876404 319-00337 319-00358 319-00357 319-00526

AUTO & FLEET SERVICE Extra Grip Reduces Slippage 11 PC. SAE LONG COMBINATION OPEN END WRENCH SET • Open-end grip provides 25% more torque • Offset box end • Comfortable I-beam handle design • Chrome plated for rust protection • Convenient storage pouch • Fractional sizes: ¼”, 5/16”, 11/32”, 3/8”, 7/16”, ½”, 9/16”, 5/8”, 11/16”, 3/4”, 7/8” • Similar to Milwaukee 48-22-9411 WRENCHES & TOOLS 15 PC. SAE LONG COMBINATION OPEN END WRENCH SET • Open-end grip provides 25% more torque • Offset box end • Comfortable I-beam handle design • Chrome plated for rust protection • Convenient storage pouch • Fractional sizes: 1/4", 9/32", 5/16", 7/8", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 15/16", 1" • Similar to Milwaukee 48-22-9511 374 313-09415 313-09411 ASCOT NO. MFG. NO. 313-09411 AS9411 DESCRIPTION 11 Pc. SAE Long Combination Open End Wrench Set 11 PC. METRIC LONG COMBINATION OPEN END WRENCH SET • Open-end grip provides 25% more torque • Offset box end • Comfortable I-beam handle design • Chrome plated for rust protection • Convenient storage pouch • Metric sizes: 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm • Similar to Milwaukee 48-22-9415 ASCOT NO. MFG. NO. 313-09415 AS9415 DESCRIPTION 15 Pc. SAE Long Combination Open End Wrench Set 15 PC. METRIC LONG COMBINATION OPEN END WRENCH SET • Open-end grip provides 25% more torque • Offset box end • Comfortable I-beam handle design • Chrome plated for rust protection • Convenient storage pouch • Metric sizes: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm • Similar to Milwaukee 48-22-9515 313-09515 313-09511 ASCOT NO. MFG. NO. 313-09511 AS9511 DESCRIPTION 11 Pc. Metric Long Combination Open End Wrench Set ASCOT NO. MFG. NO. 313-09515 AS9515 DESCRIPTION 15 Pc. Metric Long Combination Open End Wrench Set

375 AUTO & FLEET SERVICE SHOP CLEANERS & BRUSHES PLASTIC HANDLED BRASS SIDEWALL BRUSH • Densely packed brass bristles • Great for cleaning white sidewall tires • BRISTLE LENGTH: 3/4" • OVERALL LENGTH: 8-1/4" • Plastic handle fits comfortably in the hand • May be either color DENSELY PACKED BRASS BRISTLES FLOOR SQUEEGEES • Black neoprene rubber blade designed for rough, heavy use • Handle not included, order separately 395-13124 ASCOT NO. MFG. NO. DESCRIPTION 395-13124 VT-932 Plastic Handled Brass Sidewall Brush ASCOT NO. MFG. NO. DESCRIPTION 395-45507 395-44020 45507 44020 Handle WOODEN HANDLED WIRE BRUSH WITH METAL SCRAPER • Cleans rust from rims and wheels • 19 rows of steel bristles • Slightly curved wooden handle • Metal scraper included • BRISTLE LENGTH: 1" • OVERALL LENGTH: 14-1/4" 24" Straight Squeegee PALMYRA FILL GARAGE BRUSHES/BROOMS • Excellent for heavy duty sweeping of concrete, sidewalks and garage floors • Can be used for wet or dry sweeping 535-00150 CLEANS RUST FROM RIMS & WHEELS ASCOT NO. MFG. NO. 535-00150 VT-931 DESCRIPTION Wooden Handled Wire Brush with Metal Scraper ASCOT NO. MFG. NO. DESCRIPTION 395-42023 42023 24" Garage Brush-Palmyra

AUTO & FLEET SERVICE SCAN FOR VIDEO SHOP CLEANERS & BRUSHES BIG WIPES HD PRO+ • Remove paint, adhesive, Poly foam, gap fill, oil and more from hands, tools & surfaces • Dual sided abrasive fabric for the toughest jobs - Abrasive side removes even the most stubborn grime, while the smooth side soaks up the grime • Upgraded 4x4 formula – contains 4 powerful cleaning agents + 4 skin conditioners; Aloe Vera, Lanolin, Vitamin E and Glycerin • Dermatologically tested to be safe on hands. 376 ASCOT NO. MFG. NO. 395-20065 395-20046 DESCRIPTION 60020065 60020046 Big Wipes HD Pro+ 240ct. Big Wipes HD Pro+ 80ct. 395-20065 395-20046 BIG WIPES PRO+ HEAVY DUTY WIPES - 40-COUNT CUP HOLDER SIZE - 8 TUBS PER CASE • Compact canister designed to fit your vehicle’s cup holder • 40 wipes per tub – 8 tubs per case • Perfect for professionals who need fast, easy access on the move • Ideal for vans, trucks, and service vehicles • Removes paint, adhesive, oil, expanding foam, and more • Skin-friendly, clinically proven • Textured fabric for tough, stuck-on dirt • Suitable for hands, tools, and surfaces • Foil seal for extended shelf life BIG WIPES PRO+ HEAVY DUTY MULTISURFACE WIPES - 80 PER TUB - 8 TUBS PER CASE • Removes paint, silicone, tar, and more • 80 wipes per tub – 8 tubs per case • Versatile cleaning power for various surfaces • Skin-friendly, clinically proven • Exceptionally absorbent • Biodegradable wipe ASCOT NO. MFG. NO. 395-20069 DESCRIPTION 60020069 Big Wipes Pro+ Heavy Duty Wipes - 40-Count Cup Holder Size - 8 Tubs per Case ASCOT NO. MFG. NO. 395-20003 DESCRIPTION 60020003 Big Wipes Pro+ Heavy Duty Multi-Surface Wipes - 80 per Tub - 8 Tubs per Case

377 AUTO & FLEET SERVICE SHOP CLEANERS & BRUSHES BIG WIPES POWER SPRAY • Same powerful Big Wipes formula in a convenient Spray • Pre-treat large areas to clean more while using fewer wipes • Effective on the most stubborn dirt, grease, paint & adhesives • Ideal for hard-to-reach areas, surfaces & tools • Pro+ formula – contains 4 powerful cleaning agents + 4 skin conditioners: Aloe Vera, Lanolin, Vitamin E and Glycerin • Remove paint, adhesive, Poly foam, gap fill, oil and more from all types of surfaces, tools & hands • New Sports Active Fragrance • Dermatologically tested to be safe on hands • (8) 32 oz. bottles per case ASCOT NO. MFG. NO. 395-20009 DESCRIPTION 60020009 Big Wipes Power Spray - 32 Oz. Bottles BIG WIPES HD PRO+ WALL & VAN BRACKET • Fully adjustable wall & van bracket • Keep your tub of Big Wipes fixed firmly and close at hand • Allows ‘one-handed dispensing’ for those very messy jobs • Van mountable - fixes to ply paneling or integrates easily into bespoke racking system • Wall mountable - keep close by in garage or workshop • Manufactured in robust high quality polycarbonate • Pre-drilled holes for screw fixing. BIG WIPES PRO+ HEAVY DUTY WIPES - INDIVIDUALLY PACKAGED SINGLES - 25 PER BAG • Individually wrapped single packs • 25 wipes per bag • Removes paint, adhesive, oil and more • Skin-friendly, clinically proven • Textured fabric for tough stuck on dirt • Ideal for on-the-go cleaning needs • Suitable for hands, tools and surfaces ASCOT NO. MFG. NO. 395-10000 DESCRIPTION 24210000 Big Wipes HD Pro+ Wall & Van Bracket ASCOT NO. MFG. NO. 395-20070 DESCRIPTION 60020070 Big Wipes Pro+ Heavy Duty Wipes - Individually Packaged Singles - 25 per Bag

AUTO & FLEET SERVICE FULL BORE HAND CLEANER • Rids hands of dirt and grease while leaving the skin soft and chap free • Solvent free • Economical • Contains skin moisturizers • Clean fragrance • Never irritates or burns open wounds • Rinses clean • Keeps your sink clean • Keeps your pipes clean • Will not separate during hot months • Long shelf life • Neutral pH • MEETS AMERICAN CLEAN WATERS ACT LEAVES HANDS SOFT AND CHAP FREE SHOP CLEANERS & BRUSHES 378 395-00103 395-00103 395-00101 395-00102 395-06402 395-00104 395-00300 ASCOT NO. MFG. NO. 395-00101 395-00103 395-00102 395-00104 395-00300 395-00125 395-00126 395-06402 395-40000 395-06400 TS1GAL TS1Gal-W4P TS1GAL-FT DESCRIPTION ULTRA FLOW Ultra Flow, 1 Gallon Ultra Flow 1 Gallon w/ Pump Ultra Flow, 1 Gallon Flat Top ULTRA FLOW DISPENSERS Plastic Pump Plastic Pump TS300-D TS125-D TS125-FT-D EG-dispenser TS4000 TS6400 Stainless Steel Screw On Dispenser Stainless Steel Wall Mount Dispenser Stainless Steel Wall Mount Dispenser (Fits Flat Top) Dispenser for Extreme Green 64 oz. Tub SUPER GRIT Super Grit, 4 Gallon Super Grit, 64 oz. EXTREME GREEN 395-00400 MG-HS-4GAL Extreme Green, 4 Gallon 395-06401 MG-HS-64OZ Extreme Green, 64 oz. 395-06400 395-06401 395-40000 395-00400 395-00125 395-00126

379 AUTO & FLEET SERVICE SHOP LIGHTS LED RECHARGABLE HEADLIGHT • Material: :ABS+Silicone • LED: COB +3W led • Battery:1200mAh Li-poly Battery(can be replaced) • Function: COB high-COB low-3W led high3W led low-COB flashing • Press sensor switch, sensing function • Brightness: COB:200 lumen, 3W led:120 lumen • USB Type-C cable (Included) • Charging time: 3-4hours • Working time: 3-8hours • Waterproof & shockproof LED RECHARGEABLE PEN LIGHT • Aluminum pen light with laser and UV light • Top UV light, wavelength: 365NM • Side 5W COB Floodlight: 450 lumen • Tail light: 3W spotlight white LED 140 lumen & red laser light • Power Source: rechargeable Li-ion battery • Includes: 50 cm USB-C cable • Charging time: 3 hours • Run time: COB 2.5 h, white spotlight: 2.5 hours • 120° rotating metal clip with strong magnet • Dimming switch with battery indication 312-07179 312-39001 ASCOT NO. MFG. NO. 312-39001 CP-H001 DESCRIPTION LED Rechargeable Head Light ASCOT NO. MFG. NO. 312-07179 CP-R179 DESCRIPTION LED Rechargeable Pen Light ASCOT FLEXIBLE MULTIFUNCTION COB/ LED RECHARGEABLE WORK LIGHT • LED rechargeable work light with COB 1,500 lumen and 300 lumen gooseneck • Work light offers excellent brightness and comes with 5 light modes • Powered by a 4000mAh rechargeable battery for convenient and rapid charging • Applicable to various scenarios such as: reading, equipment inspection, car repair, emergency, etc • Aluminum alloy construction • Charging time: 3 hours • Features 2 strong magnets on the back side and a ring magnet on the top side • Power bank function • Made in China Video ASCOT NO. 312-00380 MFG. NO. AS-R380 DESCRIPTION Flexible Multifunction LED Rechargeable Work Light 312-00380

AUTO & FLEET SERVICE TIRE DISPLAYS, RACKS & CARTS TIRE RIDER TUFF TIRE C • Easy to maneuver, even with a full load of tires • Can handle tires up t diameter • Features a gas spring tha automatically closes the arms and grips the tires • All you have t down on the pedal, slide the c the stack of tires and release the pedal. The frame lines up the tire on its own • Allows you to move tires 12 to 35 inches in size SMART TIRE CART EASY TO MANEUVER • Works with tires up to 35" in total diameter • Moves mounted tires and wheel sets • Moves tires in stacks of 8 to 10 high • Stacks tires closer together than other carts which creates more storage space • No foot pedals • Great for loading and unloading trucks and containers • Patented tilting action relieves stress off the user • Push/pull system pushes the tires out of the Smart Cart arms without stress • Fewer moving parts • Easy to assemble 380 703-47147 EASY PUSH/PULL SYSTEM 703-00810 ASCOT NO. MFG. NO. 703-00810 MTC-E CAPACITY 6 to 8 tires DIMENSIONS 35" O.D. Max TIRE CART REPLACEMENT TIRES/WHEELS *Sold as a pair of two • Flat-free foam design • SIZE: 10" x 3-1/2" • Industrial inner & outer wheel bearings • Compatible with Martins tire carts • Flat free ASCOT NO. MFG. NO. 703-47147 CAPACITY DIMENSIONS G471147HD3 8 to 10 tires Handles sizes from 15" to 35" O.D. Max TIRE DOLLY W/ CASTERS Includes (4) swivel, non-marking and smooth 3" casters, (1) equipped with brake • 300 lb. capacity • Ideal for moving tires around or for tire storage • Unique built-in compartment stackable design for space saving storage • SIZE: 25.2" x 25.2" x 4.33" 703-00818 ASCOT NO. MFG. NO. 703-00818 DESCRIPTION PU1005ASC Tire Cart Replacement Tires/Wheels ASCOT NO. MFG. NO. 703-00509 TC0509 DESCRIPTION Tire Dolly w/ Casters

381 AUTO & FLEET SERVICE TIRE DISPLAYS, RACKS & CARTS WALL MOUNT TIRE RACK • Designed and tested to meet your toughest standards • 500 lb./227 kg of tire and wheel assemblies kept off the floor to let you do the jobs that matter • Long heavyduty steel tubes of 83"/2108 mm to hold 8 SUV tire and wheel assemblies (8 x 245 tread) • DIMENSIONS: 81-9/16" X 23-7/8" X 25-7/8" • MAX TIRE SIZE: 865 mm / 34" OD) • TIRE CAPACITY: 8 to 9 • LOAD CAPACITY: 500 lb./224 kg • WEIGHT: 42 lb. HEAVY DUTY STEEL TUBES TC400 TIRE C The Branick tire c known for its strength, dur and versatility. The laser c frame componen frame excellent rigidit prevent twisting. Its e foot pedals are slo and operate the aut cradle, which uses a h spring to provide c clamping pressur stack. The TC400 c to a 61.5" stack and 400 lbs. of tires. The cradle oper range of 20" – 37" is the lar on the market. The air give the feel of pneuma the durability of a solid tir ASCOT NO. MFG. NO. 751-00080 CAPACITY DIMENSIONS MWM-80 8-9 Tires 81-9/16" x 23-7/8" x 25-7/8" ASCOT NO. MF 703-00400 TC400 TC400 Tire Cart DELUXE TIRE DISPLAY ON CASTERS • Provides an excellent compromise between strength and lightness • Equipped with casters that let you move it quickly and easily • Allows you to store 16 tires with an outside diameter of up to 32" STANDARD TIRE DISPLAY ON CASTERS EASY TO MOVE 751-00072 ASCOT NO. MFG. NO. 751-00072 MTD-72 CAPACITY 14-16 Tires DIMENSIONS 77" x 26-1/2" x 89" ASCOT NO. MFG. NO. 751-00060 MTD-60 CAPACITY 10-14 Tires DIMENSIONS 64-1/2" x 26-1/2" x 76-1/2" • The standard tire display is 60" long and holds up to 14 tires, 7 on each of 2 tiers • This model is used a great deal by Goodyear and Michelin • With 2 wheels and 2 steel feet, moving this rack requires the display truck. The truck acts as a lever, facilitating handling in snow, on gravel surfaces and on inclines 751-00060

AUTO & FLEET SERVICE INTERIOR PROTECTION PRODUCTS PAPER KEY TAG • Cost-effective, convenient solution for key control • Metal ring 399-98313 GENERIC ADHESIVE TIRE LABEL • Features sure-grip adhesive • Proper used tire labeling sells tires ASCOT NO. MFG. NO. 399-98313 DESCRIPTION FB-P9833-13 PLASTIC KEY TAG • Self-locking design holds keys secure • Large writing surface; holes are fully punched out eliminating “chads” • Perfect for quickly tagging keys in a busy service area 399-99323 Paper Key Tag with Metal Rings SIZE 1.5" x 2.75" QUANTITY 1,000/box ASCOT NO. MFG. NO. 399-99479 DESCRIPTION FB-P9943-79 399-99479 QUANTITY Generic Adhesive Tire Label - 3" x 6" 500/roll STATIC CLING PRINTER 399-11111 • Full feature Reminder Sticker Solution takes professionalism to a new level • Godex Printer pre-programmed to work out of the box • 1 year parts and labor warranty (6 months on print head) • Includes 1 ribbon ASCOT NO. MFG. NO. 399-99323 DESCRIPTION FB-P9933-23 White Plastic Key Tag - 4.5" x .75" WORK TICKET HOLDER • Heavy-duty sewn nylon fabric handle ensures durability even in harsh conditions • Durable brass grommet increases strength ASCOT NO. MFG. NO. 399-99302 DESCRIPTION SIZE QUANTITY FB-P9933-02 Work Ticket Holder 10.5" x 14.5" 25/box PLASTIC FLOOR MAT • Slip-N-Grip® two-layer construction ensures mat stays in place • Impervious to water, oil, grease and most shop chemicals • Excellent item to promote repeat business • Keeps your name, the service to be done and the time to do it in constant view of the customer • More effective than a door jam sticker • Static cling vinyl will cling to almost any smooth surface • No adhesive residue and they can be removed for cleaning and replacing • Silk screen printing process for a high quality image and a writing strip that won’t allow the ink to fade • Generic design stickers as well as personalized stickers ASCOT NO. MFG. NO. 399-11111 DESCRIPTION FK-GX001-05 Static Cling Printer STATIC CLING REMINDER STICKERS QUANTITY 1000/package 399-99302 382 399-00101 399-00102 399-99432 ASCOT NO. MFG. NO. 399-99432 DESCRIPTION FG-P9943-02 Plastic Floor Mat QUANTITY 500/roll ASCOT NO. 399-00101 399-00102 399-00103 DESCRIPTION Air Pressure/Tire Rotation Static Cling Sticker Oil Change Static Cling Sticker Service Reminder Static Cling Sticker 399-00103

383 AUTO & FLEET SERVICE INTERIOR PROTECTION PRODUCTS HD FLOOR DISPENSER RACK PLASTIC TIRE BAG • 40% post-consumer recycled resin • White film hides dirty tire • Ideal for returning old tires or snow tires for storage 399-99429 • Industry-leading dispenser system keeps products organized and within reach • Presents “We Care” image and promotes cleanliness • Retention straps prevent free-rolling and locking casters keep dispenser in place • Top tray holds paper floor mats and other service items while lower tray provides extra storage ASCOT NO. MFG. NO. 399-99391 399-99429 399-99392 DESCRIPTION FG-P9933-91 FG-P9943-29 FG-P9933-92 Standard Tire Bag Large Tire Bag SIZE QUANTITY Extra Large Tire Bag 47" x 48" x 1.25 Mil 125/roll 250/roll 250/roll 36" x 40" 39" x 44" PLASTIC SEAT COVER • Slip-N-Grip® seat covers have two distinct layers: the bottom layer grips the seat to stay in place and the top layer is smooth to allow easy entry and exit from the vehicle • Protects bucket, bench and split seats 399-99415 ASCOT NO. MFG. NO. 399-99415 DESCRIPTION FG-P9943-15 QUANTITY 399-98893 Plastic Seat Cover 500/roll HEAVY DUTY CASTERS STEERING WHEEL COVER • Keeps grease, dirt and other shop chemicals off • Made of clear polyethylene with stretch elastic grip feature • Unique double-band steering wheel covers stays in place while allowing access to airbags STANDARD SIZE: Covers virtually all passenger cars and light trucks. LARGE SIZE: Fits the oversized steering wheels of heavy trucks and motor homes. 399-99433 ASCOT NO. MFG. NO. 399-99433 399-99435 DESCRIPTION FB-P9943-33 FB-P9943-35 Double Band Steering Wheel Cover (Standard Size) Double Band Steering Wheel Cover (For Trucks) QUANTITY 500/box 250/box ASCOT NO. MFG. NO. 399-98894 MFDR DESCRIPTION Floor Dispenser Rack

AUTO & FLEET SERVICE INTERIOR PROTECTION PRODUCTS PRIME HEAVY DUTY PAPER FLOOR MATS • Treated/coated mats, made from premium prime/virgin paper • Keeps dirt, grease, oil, spills, leaks and other shop fluids out of your customer’s vehicle during service • Prime paper is suitable for all weather climates and heavy foot traffic • Prime paper directly from paper mill provides same consistent quality every time • Printed with UV ink • Bright white paper produces vibrant, full color prints • Recyclable • SIZE: 17" x 19" • QUANTITY: 500 per box ASCOT NO. MFG. NO. 399-01719 01719 DESCRIPTION Prime Heavy Duty Paper Floor Mats - 17" x 19" 399-01719 384 TIRE LABELS • 2-1/2" x 6" label for easy identification of new, used and retreaded tires • Packed 500 per roll ASCOT NO. MFG. NO. 601-00101 TL-101 DESCRIPTION Tire Labels New-Used-Retread 601-00101 GREENCORE CAN LINERS - 55-60 GALLON EXTRA HEAVY DUTY - BLACK • Made with up to 70% post-consumer recycled plastic • Multipurpose bags with the added benefit of being made from recycled plastic • 3-ply strength means no tears or leaks • 55-gallon • 1.25 mil • Extra heavy duty, black bags • 10 per roll, 10 rolls per box • Coreless rolls with perforation for easy opening and promote sales ASCOT NO. MFG. NO. 399-99075 DESCRIPTION FG-GPCR-75 Greencore Can Liners - 55-60 Gallon Heavy Duty-Black 399-99075

385 AUTO & FLEET SERVICE STUD GUNS & STUDDING EQUIPMENT STUD GUN, STUDDING EQUIPMENT PARTS BREAKDOWN 458-00010 458-00500 ASCOT NO. MFG. NO. DESCRIPTION 458-00010 10-G 458-00002 458-04048 458-00005 458-00500 KFP2 4048 K-5 K-500 Stud Gun. Standard of the Industry. Automatic, Light weight STUD GUN PARTS (AS-9 MODEL) Stud Feeder. Fully automatic with 110 Volt motor, fast loading. Provides positive stud orientation. Feeds up to 225 studs per minute Feederboy Stud Gun. Designed for fast feeding studs of the AS-9 Gun Attaches with screw clamp. Operates by manually turning the feeder cap Stud Stand saddle, extension for feeder & tray. Welded steel construction. K5M doesn't have tall post. Studding Equipment Kit. INCLUDES: K-5 stand, AS-9 gun, KFP2 automatic stud feeder SINGLE FLANGE STUDS: TSMI Size 11 12 Nearest 32" to Hole Depth Box QTY STUDDING EQUIPMENT • Lightweight, reduces road wear • Steel 12SL, 13SL & 16SL meet requirements for Washington, Oregon & Idaho 458-03820 ASCOT NO. STUDDING GUN 458-00010 458-00011 10G 10T USE WITH STUDS NUMBERED TSMI-11-12-13-15-16-17 TSMI-19-21 0382 11/32" 12/32" 13 13/32" 15 15/32" 16 16/32" Box/1000 STUD GUN REPAIR & CONVERSION KITS ASCOT NO. STUDDING GUN USE WITH STUDS NUMBERED 458-03810 0381 Tire Stud Mini Repair Kit. INCLUDES: (3) 0084 External Fingers; (1) 0087 O-ring; (1) 0088 O-ring; (3) 0126 Pressing Springs Tire Stud Gun Large Repair Kit. INCLUDES: (6) 0126 Pressing Spring; (3) 0084 External Fingers; (2) 0087 O-ring; (2) 0088 O-ring; (1) 0092 Piston Cup; (1) 0136 O-ring 458-00911 0911 Conversion Kit. Converts AS-9 Gun to AS-11 Truck Model. INCLUDES: (1) 0401 Truck Feed Tube; (1) 0400 Truck Stud Gun Head; (3) 0127 Truck Stud Gun Internal Finger 17 19 21 17/32" 19/32" 21"/32" PART NO. DESCRIPTION 0084 External Finger 0087 O-Ring 0088 O-Ring 0089 O-Ring 0090 O-Ring 0091 O-Ring 0092 Piston Cup 0095 Trigger Spring 0096 Trigger Pin 0098 Trigger 0099 Trigger Sleeve 0126 Pressing Spring 0127 Internal Finger 0128 Handle Body 0129 Piston 0130 Feed Tube 0131 Tapered Sleeve 0132 Head (Steel) 0133 Ring Nut 0134 Compression Spring 0135 Ring 0136 O-Ring 0383 Piston Cup STUD FEEDER PARTS (KFP2 MODEL) PART NO. DESCRIPTION 0169 Deflector Spring 0172 Snap Ring 0173 Screw 0174 Washer 0175 Clamp 0180 Drive Shaft Pin 0428 Washer 0513 Clear Tube 0519 Feed Wheel 0520 Base Plate 0521 Retaining Ring 0522 Feed Tube 0523 Screw 0524 Shaft 0525 Hex Bolt

AUTO & FLEET SERVICE DRAINS & PUMPS 18-GALLON POLYETHYLENE WASTE OIL DRAIN • 18 gallon capacity • Plastic drain container • Comes with 16.5” funnel • Extends from 40” to 73” • Metal trolley comes with 4 casters and pull handle for safe and easier movement around the shop • Oil can be drained either by pour gravity, integrated drain valve or using integrated bung hole rotary barrel pump (not included) • SHIP WEIGHT: 24 lbs. ASCOT NO. MFG. NO. 329-08874 8874 DESCRIPTION 18-Gal Polyethylene Waste Oil Drain 18-GALLON LOW PROFILE WASTE OIL DRAIN • Low profile drain height of 7.75” • Large 18 gallon baffled tank reduces “slosh” during transport • Large metal screen provides extra draining area and keeps out debris • Convenient rotary hand pump for fast evacuation • Long steel handle provides easy mobility to drain area • SHIP WEIGHT: 47 lbs. ASCOT NO. MFG. NO. 329-08878 8878 DESCRIPTION 18-Gal Low Profile Waste Oil Drain 329-08874 386 329-08878 24-GALLON WASTE OIL DRAIN • Large 24 gallon steel recovery tank with 6’ drain hose • Tank-mounted oil-level sight gauge and convenient tool tray • Standard 15-3/4” drain funnel and wide 24” funnel adapter (shown) with drain tube that extends from 54” to 79” • Pressure regulator • Heavy duty wheels and casters • SHIP WEIGHT: 82 lbs. ASCOT NO. MFG. NO. 329-08890 8890 DESCRIPTION 24-Gal Waste Oil Drain with Pressurized Evacuation 329-08890 329-08895 24-GALLON WASTE OIL DRAIN WITH PROBE KIT • 18 gallon suction capacity • 100 PSI shop air connected to vacuum gauge quickly creates suction • Large 16” collection funnel (4-7/8 gallon capacity) • Suction extraction at 1/2 gallon per minute • 78” suction and drain hoses • Pressurized evacuation of tank makes emptying easy • 70.8” maximum height • Six flexible evacuation probes and VW, Mercedes and BMW adapters • Two air ports: 1 for pressure, 1 for vacuum • SHIP WEIGHT: 93 lbs. ASCOT NO. MFG. NO. 329-08895 8895 DESCRIPTION 24-Gal Waste Oil Drain/Evacuator with Probe Kit

387 AUTO & FLEET SERVICE DRAINS & PUMPS 18-GALLON OIL LIFT DRAIN • Translucent jug holds 18 gallons and will not warp with hot oil • Rolls easily with four heavy-duty 2 1/2" wheels • Metal tubes extend working area from 36-1/2" to 77" • Drains from the bottom with a brass drain valve • Large 15" funnel has a built in strainer to catch drain plugs 8-GALLON OIL LIFT DRAIN • This specially shaped, translucent jug holds 8 gallons • Reinforced base will not warp with hot oil • Has a wide working range from 36 1/2" to 74" • Its lower center of gravity increases stability and four 2 1/2" ball bearing wheels swivel and roll easily • Also has a heavy-duty adjustment clamp, large handle and big pour spout with threaded cap • Large 15" funnel has strainer built-in to catch drain plugs • Base of funnel is 1 3/4" wide WILL NOT WILL NOT WARP WITH HOT OIL WARP WITH HOT OIL 322-1110 322-17432 ASCOT NO. MFG. NO. 322-17432 17432 DESCRIPTION 18-Gallon Oil Lift Drain ASCOT NO. MFG. NO. 322-11102 11102 DESCRIPTION 8-Gallon Oil Lift Drain

AUTO & FLEET SERVICE DRAINS & PUMPS ROLLING FL • Comes pr be used f for fluid iden 1 swiv splash lip • 3 LOW PROFILE TRUCK OIL DRAIN WITH LID • Holds 60 quarts • Equipped with 4 rollers and a handle for transport and positioning under trucks • Cover and curved side design help keep fluids from spilling during movement • Convenient handles and pour spout facilitate fluid evacuation • Rolls under most cab over axles so oil can be changed without jacks or jack stands • OVERALL HEIGHT: 7-1/2", WIDTH: 32-1/4", LENGTH: 49" 388 ASCOT NO. MFG. NO. DESCRIPTION 322-19202 19202 322-41203 5-LITER OIL DRAIN PAN FOR BUSES, TRAILERS & TRUCKS • Catches oil from hubs after removing cap • Fits rims on buses, trailers and large trucks • Prevents oil mess during wheel r Side opening design for easy dumping of oil collection • Made of polypropylene for durability • Capacity 5 liters (178 oz.) ASCOT NO. MFG. NO. CAPACITY DESCRIPTION 322-41203 322-41467 — 322-41206 322-41461 — Low Profile Truck Oil Drain with Lid 4120-003 5.2-Gallon Truck Drain for Antifreeze 4140-067 4120-006 26-Gallon Truck Drain for Motor Oil 4140-061 Cam-Lock Coupler, Adapter and Valve Kit (3/4") for 4120-003 drain ASCOT NO. MFG. NO. 322-90045 Cam-Lock Coupler, Adapter and Valve Kit (1")for 4120-003 drain FS9004-5L Truck & Trailer Wheel Pan TRUCK & TRAILER WHEEL PAN EVACUATION PACKAGE FOR USED OIL 322-11210 ASCOT NO. MFG. NO. 322-11210 1121-024 DESCRIPTION Truck & Tr • Prevents oil mess during wheel repair • The pan fits rims with 13 3/4" ID and larger • Handle compartments hold hub nuts out of the oil • Made of polypropylene for durability • Will not warp if oil is warm • CAPACITY: 88 ounces ASCOT NO. MFG. NO. 329-19852 19852 DESCRIPTION Truck & Trailer Wheel Pan DESCRIP

389 AUTO & FLEET SERVICE DRAINS & PUMPS DUNK TANKS COMING FALL 2026! • Heavy duty plastic tire and tube test tank • Features pyramid type ribs for extra support to prevent bowing • Handles passenger tire sizes to wide oval and light duty truck tires • Roller Included TRANSMISSION DRAIN FUNNEL • 22" by 23" heavy duty plastic lift drain funnel • Extends the catch area of any lift drain • Funnel catches any loose parts • Prevents parts from falling through drain 322-17892 ASCOT NO. MFG. NO. 322-17892 17892 DESCRIPTION Transmission Drain Funnel MULTI-DRAIN TUB 322-00738 • 30-quart, all purpose, heavy duty, plastic drain tub • For draining radiator, crankcase, transmission differential • Accommodate autos and trucks • Apron for washing and sorting parts 322-17922 ASCOT NO. MFG. NO. 322-17922 17922 DESCRIPTION Multi-Drain Tub 4.5-GALLON OVAL DRAIN PAN • New, smooth pan design is easy to wipe out and clean • 6.25" pan height to fit tight spaces • 1.125" outer diameter spout for quick and easy pouring of used fluids into most jugs • Anti-splash lip helps prevent spills when carrying or pouring • Multiple hand positions for carrying • Made of high density polyethylene material that is resistant to chemicals and solvents ASCOT NO. MFG. NO. 322-00738 322-87738 DESCRIPTION ASC-TDT ASC-PDT Ascot Passenger Car Tire Tester/Dunk Tank W/Roller Ascot SUV/Light Truck Tire Tester/Dunk Tank W/Roller 322-17972 ROLLER FOR DUNK TANKS • Allows for easier circular movement of the tire and wheel assembly while within the tank 322-87738 2 ASCOT NO. MFG. NO. 322-87738 322-87838 DESCRIPTION ASC-TR009 ASC-TR008 Tire Roller For Ascot Passenger Car Dunk Tanks Tire Roller For Ascot SUV/Light Truck Dunk Tank ASCOT NO. MFG. NO. 322-17972 322-17982 17972 17982 DESCRIPTION Black Drain Pan (For Oil) Green Drain Pan (For Coolant)

AUTO & FLEET SERVICE OIL ACCESSORIES 6-QT. OIL DISPENSER • Translucent white (see-through) polyethylene material enables the user to read the liquid level on the container • Marked in both quarts and liters • The flexible 8" pouring spout enables easy transfer of liquid • The spout is white RADIATOR FILLERS • Long curved spout, balanced shape and handle positions • Weather resistant plastic • 12-quart capacity WEATHERRESISTANT PLASTIC 390 ASCOT NO 329-19732 329-19732 329-00505 8-QT. OIL DISPENSER WITH LID & CAP • 8-Quart Dispenser with a spout cap and lid to keep out dirt, dust and other contaminants • Many large SUVs and trucks now require more oil — works great to transport bulk oil • Translucent white polyethylene material enables the user to read the oil level on the container up to 8 quarts and is marked in both quarts and liters • Flexible, removable 8" pouring spout enables easy transfer of liquid ASCOT NO. MFG. NO. 329-00505 DESCRIPTION 6110-010 CAPACITY Black Plastic Radiator Filler 12 Quarts LOW PROFILE OIL DISPENSER SPOUT CAP AND LID KEEPS DIRT OUT MARKED IN BOTH QUARTS & LITERS • Shut off valve can be positioned over the funnel before opening to eliminate drips and spills • Translucent white polyethylene material enables the user to read the oil level on the container • Marked in quarts and liters on two sides of the dispenser • Works great to transport bulk oil for large SUVs and trucks that require more oil • Dispenser is 15.75" long x 7" wide x 9 ASCOT NO. MFG. NO. DESCRIPTION 329-19702 19702 8-Quart Oil Dispenser with Lid & Cap ASCOT NO. MFG. NO. 322-19602 19602 Low Profile Oil Dispenser DESCRIPTION

391 AUTO & FLEET SERVICE OIL ACCESSORIES OIL FILTER WRENCH SLIP JOINT HANDLE OIL FILTER PLIERS • Two-position, slip-joint handle produces the range of three separate conventional filter wrenches • Overall range 2 1/4" to 4" • Jaws are bent at a 20-degree angle to fit more applications • Sure grip teeth prevent slipping • Cushioned handles provide comfort • OVERALL LENGTH: 11-1/2" • Fits filters from 2 1/2" to 3 1/8" • Removes all oil filters from 2 1/2" t 3 1/8" in diameter • This extra large range enables the 63600 wrench to fit most all import car filters plus the common 3" domestic car filters • Steel jaws grip filter without slipping • Works in tight spots from the front of the filter using 3/8" drive ASCOT NO. MFG. NO. 329-01540 3301540 ASCOT NO. MFG. NO. 329-50750 50750 DESCRIPTION Slip Joint Handle Oil Filter Pliers SWIVEL GRIP OIL FILTER WRENCHES • Handle swivels to clear obstructions • Features the swivel handle, gripper “teeth” and 1" wide stainless steel band • The swivel handle makes it easy to turn filters in hard to reach locations • Vinyl covered handle DESCRIPTION Oil Filter Wrench 3/8" 19mm for 65-120mm 329-53500 HEAVY DUTY END CAP OIL FILTER WRENCHES End cap filter wrenches have been improved by adding welds to hold a steel disc to the top of the wrench. • Cup design allows easy filter removal and installation from the end of the filter, even in the tightest locations • End cap filter wrenches fit the most popular domestic and import vehicles • 14 flutes • Use with 3/8 in. square drive • These low-profile sockets are specially designed for operating clearance • Welded steel disc on top for extra strength • Heat treated steel • 3/8" drive ASCOT NO. MFG. NO. DESCRIPTION 329-61570 329-61600 61570 61600 ASCOT NO. MFG. NO. DESCRIPTION 329-53500 329-53700 53500 53700 OIL SERVICE WRENCH SET • For fitting/removing oil draining and gear oil control screws • Suitable sockets for various drive types • Actuator 3/8" according to DIN 3120 - C 10, ISO 1174, SW 19 or rotary pin 8 mm Ø • Handoperated • Chrome-vanadium steel • In rugged plastic case Standard Swivel Grip Oil Filter Wrench: 3.5" - 3.875" Range Small Swivel Grip Oil Filter Wrench: 2.875" - 3.25" Range 329-61570 Heavy Duty End Cap Oil Filter Wrench: 76 mm - 14 Flutes Heavy Duty End Cap Oil Filter Wrench: 65 mm - 14 Flutes IMPORT CAR OIL FILTER WRENCH • Fits filters from 2 1/2" to 3 1/8" • Removes all oil filters from 2 1/2" to 3 1/8" in diameter • This extra large range enables the 63600 wrench to fit most all import car filters plus the common 3" domestic car filters • Steel jaws grip filter without slipping • Works in tight spots from the front of the filter using 3/8" drive WORKS IN TIGHT SPOTS NON-SLIP STEEL JAWS 329-63600 329-01544 ASCOT NO. MFG. NO. 329-01544 3301544 DESCRIPTION Oil Service Wrench Set Q-handle 3/8" 12 Pieces ASCOT NO. MFG. NO. 329-63600 63600 DESCRIPTION Import Car Oil Filter Wrench

AUTO & FLEET SERVICE AIR CONDITIONING COOL-TECH 34288NI RECOVERY/ RECYCLING SYSTEM • AUTOMATIC OIL DRAIN: Automatically drains oil recovered during the recovery operation and puts the oil in a graduated container showing the user how much needs to be injected back into the system • AUTOMATIC AIR PURGE: Eliminates damaging air without monitoring gauges or opening valves • PROGRAMMABLE VACUUM FUNCTION: Defaults to 15 mins, programmable up to 99 mins. “Remaining time” is displayed • OPTIONAL REFRIGERANT & OIL DATABASE: A/C system capacities for North American market vehicles (Not included with the machine) PREMIUM 34988NI A/C RECOVER, RECYCLE AND RECHARGE MACHINE • Fully automatic recovery, vacuum leak test and recharge - no monitoring required • Patented automatic refrigerant refill prevents machine from emptying supply tank • Only machine with fully automatic oil injection • Two oil inject bottles for different oils to work on more vehicles with less down time • Large easy-to-read color display and printer standard • UV dye injection capability for leak detection • Automatic air purge eliminates system-damaging air 361-34988 361-34288 ASCOT NO. MFG. NO. 361-34288 DESCRIPTION 34288NI Recovery/ Recycling System DIMENSIONS SHIPPING WT. 50" H x 34" W 225 lb. COOL-TECH 34788NI RECOVERY/ RECYCLING SYSTEM • Fully automatic operation • 98.5% recovery • R134a • IMPROVED CHARGE PERFORMANCE: Exceeds SAE requirements • Graphical display • EXPANDABLE: Capable of additional feature and function add-ons (printer, wireless, refrigerant ID) • Automatic Internal tank fill EXPANDABLE 361-34788 ASCOT NO. MFG. NO. 361-34788 361-34789 34788NI 34788NI-H DESCRIPTION Recovery/Recycling System SHIPPING WT. 235 lb. Hybrid Recovery/Recycling System 222 lb. ASCOT NO. MFG. NO. 361-11234 DESCRIPTION AC1234-4 Premier R-1234yf Recover, Recycle and Recharge Machine PREMIER R-1234YF RECOVER, RECYCLE AND RECHARGE MACHINE • 98.5% recovery efficiency • Charge accur within +/- ½ oz. • FULLY AUTOMATIC OPERATION: Program for service, walk away and return when complete • Automatic internal tank refill. No stopping to fill the internal tank during service, or before service • Automatic oil drain shows how much oil was removed from the system during service • Integrated refrigerant identifier • Programmable vacuum operation helps get to the necessary vacuum level in any condition quickly • System leak test to identify gross leaks in a system • 5 × 9 cm (4.3-in. diag) Color graphical display • Exceeds SAE J2843 requirement for R-1234YF Recover, Recycle and Recharge equipment SHIPPING WT. 206 lb. ASCOT NO. MFG. NO. 361-34988 34988NI DESCRIPTION SHIPPING WT. Recovery/Recycling System 232 lb. 392

393 AUTO & FLEET SERVICE AIR CONDITIONING R134A A/C SERVICE UNITS • Innovative, ergonomic hinged service door simplifies unit service • 7” capacitive touch screen and intuitive user interface • Bright LED indicator light • Wireless software update capability • Automatic weighing of recovered oil • Data management and reporting for refrigerant use optimization and warranty reporting • Connectivity for remote technical support • Network printing capability with PDF emailing capabitilies R1234YF A/C SERVICE UNITS • Innovative, ergonomic hinged service door simplifies unit service • 7” capacitive touch screen and intuitive user interface • Bright LED indicator light • Wireless software update capability • Automatic weighing of recovered oil • Data management and reporting for refrigerant use optimization and warranty reporting • Connectivity for remote technical support • Network printing capability with PDF emailing capabitilies ASCOT NO. MFG. NO. 361-02150 DESCRIPTION ACX2150 ACX2150 Features: • Integrated automatic oil and UV dye injection for AC leak detection • Optional iOS and Android phone app for remote service session mirroring and advanced functionality 361-02180 ACX2180 ACX2180 Features: • EcoLOCK® R134A Couplers • Database included • iOS and Android phone app for remote service session mirroring and advanced functionality included • Integrated automatic oil and UV dye injection for AC leak detection 361-12180 ACX2180H ACX2180H Features: • Hybrid certified (no oil injection) • EcoLOCK® R134A couplers • Database included • iOS and Android phone app for remote service session mirroring and advanced functionality included ASCOT NO. MFG. NO. 361-02250 DESCRIPTION ACX2250 ACX2250 Features: • Non-integrated refrigerant identifier • Optional iOS and Android phone app for remote service session mirroring and advanced functionalit 361-02280 ACX2280 ACX2280 Features: • Integrated refrigerant identifier • Database included • EcoLOCK® R1234YF Couplers • iOS and Android phone app for remote service session mirroring and advanced functionality included

AUTO & FLEET SERVICE SAFETY PRODUCTS FACE SHIELDS SAFETY GLASSES • 12 pcs. per inner box • 300 pcs. per case • Smoke lens • Anti-scratch & anti-fog coating • Lightweight, unisex protective eyewear • High wraparound coverage • Comfortable, contoured fit • Designed for indoor or outdoor use • Polycarbonate lenses absorb 99.9% UVA and UVB • ANSI Z87.1 CE EN 166 396-00901 396-14200 394 396-00902 396-14955 396-21000 ASCOT NO. 396-14955 396-14200 396-21000 MFG. NO. 14955 14200 21000 DESCRIPTION 170-SB Crown and Window Kit MAXVIEW™ Premium Face Shield - Clear Window GPL500 Premium Goggle with Flip-Up Detachable Shield - Clear Lens, Anti-Fog HEARING PROTECTION SAFETY GLASSES • Lightweight, stylish, comfortable and very affordable • High impact optically correct wrap style unitary PC lens offers superior coverage • Soft, flexible temple tips & soft nose piece offers all day comfort • Temples are curved inwards to ensure comfortable, slip-resistant fit • Temple tips are curved outwards for gentle placement and removal • Meets ANSI Z87.1-2015 and tested to U.S. Military Standard MIL-PRF-31013 • Available in clear/black, amber/black and smoke/black styles 396-23430 ASCOT NO. 396-00901 396-00902 SG-2 CLEAR SG-2 SMOKE Safety Glasses-Clear Lens Safety Glasses-Smoke Lens MFG. NO. DESCRIPTION 396-23421 ASCOT NO. MFG. NO. DESCRIPTION 396-20773 20773 396-20773 FEATURES Jackson H70 Vibe Earmuffs - Orange Highly padded ear cups for all day comfort, Dielectric, durable thermoplastic material retains shape and pressure, Great for environments such as lawn mowers, industrial work, traffic noise, etc. 396-23412 396-73601 S23412 Sellstrom Disposable Ear Plugs - FOAM Bullet Shape, Corded, Hi-Viz Green (100 pairs per box) 396-73611 396-73621 ASCOT NO. 396-73601 396-73611 396-73621 MFG. NO. S73601 S73611 S73621 DESCRIPTION Sellstrom XM330 Safety Glasses - Clear/Black Sellstrom XM330 Safety Glasses - Amber/Black Sellstrom XM330 Safety Glasses - Smoke/Black 396-23430 S23430 396-23421 S23421 Sellstrom Reusable Ear Plugs - Tapered, Corded, Blue/ Hi-Viz Green (100 pairs per box) Sellstrom Banded Ear Plugs - Tapered, Hi-Viz Green (1 per bag) Gently but quickly expand to fit ear canal, Soft non-irritating PU foam for max comfort, Independently tested/certified to NRR 32 (ANSI S3.19). CSA Class AL. Ensure optimum ear canal coverage, Firm push/pull post for easy insertion/ removal, Reusable - Can be washed and reused, Non-allergenic polymer materials Wear around the neck when not in use, Regular and intermittent applications - Easily removed, Band shape curves at the plug end to keep pods up and clean when not in use

395 AUTO & FLEET SERVICE SAFETY PRODUCTS TEAR AWAY MESH SAFETY VESTS • Meets visibility standards and requirements for medium risk traffic control and public safety workers, including school crossing guards, survey crews and more • COOLING COMFORT - Polyester mesh is breathable, durable and keeps you cool on the job • HI-VIS - Includes StarTech reflective tape for excellent visibility • Features 5 point tear-away and D-ring access slot KNEE PADS - ULTRA FLEX III • Articulating hinge ensures proper placement all day • Soft elastic and wide straps are well placed and above the knee - No velcro • Strong & flexible plastic outer shells • Pads offer 5/8" closed cell foam pad, Sweat will not penetrate • Built for years of hard work and heavy use 396-96110 ASCOT NO. 396-96110 MFG. NO. S96110 EYE WASH STATIONS • The ideal first response solution when continuous water supply is unavailable • Quickly flushes contaminants from eyes using a sterile, buffered & preserved solution • Can be wall-mounted or placed on flat surfaces • Highly visible green backboard • Available in 6 gallon personal station or 32 oz. bottle station 396-90306 DESCRIPTION KneePro Ultra Flex III Knee Pads - Grey/Orange 396-30561 396-90333 396-30551 ASCOT NO. MFG. NO. 396-90306 396-90333 S90306 S90333 Sellstrom 6-Gallon Gravit-Eye Portable Eyewash Station Sellstrom 32 oz. Double Rapid-Clear Eyewash Bottle Station DESCRIPTION ASCOT NO. MFG. NO. 396-30551 396-30552 396-30553 396-30554 396-30561 396-30562 396-30563 396-30564 DESCRIPTION V1030550U-S/M V1030550U-L/XL V1030550U-2/3XL V1030550U-4/5XL V1030560U-S/M V1030560U-L/XL V1030560U-2/3XL V1030560U-4/5XL Safety Vest - Hi-Vis Orange, Size S/M Safety Vest - Hi-Vis Orange, Size L/XL Safety Vest - Hi-Vis Orange, Size 2XL/3XL Safety Vest - Hi-Vis Orange, Size 4XL/5XL Safety Vest - Hi-Vis Yel/Green, Size S/M Safety Vest - Hi-Vis Yel/Green, Size L/XL Safety Vest - Hi-Vis Yel/Green, Size 2XL/3XL Safety Vest - Hi-Vis Yel/Green, Size 4XL/5XL DOT CONSPICUITY TAPE • Meets all Federal and State certifications • Micro prisma technology • Thin and flexible • 10-year durability 3 ASCOT NO. 396-62150 396-72182 396-72150 396-82150 396-92150 396-93150 MFG. NO. CT6R6W2150 CT11R7W2X18 CT11R7W2150 CTR2150 CTW 2150 CTY2150 DESCRIPTION 2" x 150' (6" Red, 6" Silver) 2" x 18" Strip (11" Red, 7" Silver) 2" x 150' (11" Red, 7" Silver) 2" x 150' Solid Red 2" x 150' Solid Silver 2" x 150' Solid Yellow

AUTO & FLEET SERVICE SAFETY PRODUCTS EVA FOAM KNEELING PAD • 3-layer foam material • Built-in Handle • Extremely durable • Works on any surface • Chemical resistant • Can be used as seat protection as well • Made in Taiwan MAG-BEAR 25’ MAGNETIC RETRACTABLE BARRIER • Our 25ft Belt with printed “Caution - Do Not Enter” Warning, in a vibrant color • Ultimate Portability can be easily moved and set up wherever needed • Prioritizing technician safety, our system helps safeguard them while servicing equipment, preventing unauthorized access and potential accidents • With a magnetic mounting system, this product can be quickly and securely installed • Equipped with six super strong magnets on the back and two on the belt end • Count on our super-strong magnets to maintain a dependable and robust barrier 396 396-00357 ASCOT NO. MFG. NO. 396-00357 DESCRIPTION NS-KP480320 EVA Foam Kneeling Pad 3-PIECE ROADSIDE EMERGENCY TRIANGLE KIT • Set of 3 includes carrying case • High visibility during daytime and nighttime • Reinforced cross base • Foldable for easy storage • Large 17” x 17” triangle • Made in China ASCOT NO. MFG. NO. 396-95055 95055 396-95056 95056 DESCRIPTION Mag-Bear 25' Magnetic Retractable Barrier Mag-Bear Red 25' Magnetic Retractable Barrier ORANGE LED SAFETY FLARE KIT 396-00003 • 360° of 16 super bright orange LED's • Sequential flow pattern available without manual programming • U.S. DOT approved, MUTCD Type A (flashing) and Type C (solid on) • Road flare includes a powerful magnet to attach to metal surfaces • Waterproof and floats • Crush and corrosion proof • Rechargeable lithium-ion battery (3.7 volt, 1000 amp) in each flare • Includes carrying case that is also a charging unit. ASCOT NO. MFG. NO. 396-00003 DESCRIPTION 3P-RETK 3-Piece Roadside Emergency Triangle Kit ASCOT NO. MFG. NO. 7502-S 396-75027 DESCRIPTION Led Safety Flare Kit COMING FALL 2026! • 9 different flashing patterns: • FLASH: Rotation, Fast, Slow and Alternating • SOS Signal • High Brightness • Low Brightness • 2-Light On; 4-Light On 396-95056 396-95055

397 AUTO & FLEET SERVICE SAFETY PRODUCTS ROAD SERVICE SAFETY SIGN • 48” x 48” Bright reflective high visibility orange sign • “TRUCK REPAIR AHEAD” in large black font • Strong fiberglass cross ribs for superior sign support • Cross ribs include two 18” ange flip up flags vy duty dual spring aluminum tand with non-skid rubber feet • Sign and aluminum stand can be chased separately 396-00048 COMING FALL 2026! 396-96110 396-10206 MISC SAFETY EQUIPMENT ASCOT NO. MFG. NO. 396-47104 47104 Strong Fiberglass Cross Ribs For Superior Sign Support ASCOT NO. MFG. NO. 396-00048 DESCRIPTION Jackson Safety® - Welding Helmet - Auto Darkening - Nylon - 3.94" x 2.64" Viewing Area - Shade 10 Fixed ADF 1/1/1/1 - 370 Speed Dial Headgear - Reapers n' Roses Graphics 396-47101 47101 Jackson Safety® - Welding Helmet - Auto Darkening - Nylon - 3.94" x 3.64" Viewing Area - Shade 3/5-13 Variable ADF 1/1/1/1 - 370 Speed Dial Headgear - Hellfire Graphics 396-20392 396-96110 396-10206 396-10216 396-02996 396-12996 396-22996 20392 S96110 V1020161U-L/ XL V1020161U2/3XL V1029960U-L V1029960UXL V1029960U2XL Jackson Safety® - Hard Hat - Charger Series - Front Brim - White - Ultra Flex III Knee Pads GREY/ORANGE Pioneer® - Safety Vest - Color: Hi-Vis Yellow/Green/Black - Size: L/XL Pioneer® - Safety Vest - Color: Hi-Vis Yellow/Green/Black - Size: 2/3XL Pioneer - Breakaway Safety Vest - Color: Hi-Vis Yellow - ANSI/ISEA 1072020 Class 2 Type R - Size: Large Pioneer - Breakaway Safety Vest - Color: Hi-Vis Yellow - ANSI/ISEA 1072020 Class 2 Type R - Size: XL Pioneer - Breakaway Safety Vest - Color: Hi-Vis Yellow - ANSI/ISEA 1072020 Class 2 Type R - Size: 2XL ASCOT NO. MFG. NO. 396-58201 396-58215 ASC-001 DESCRIPTION Ascot Collapsable Safety Cone W/ Light ASC-001L Replacement Light For Safety Cone 396-58201 ASCOT COLLAPSABLE SAFETY CONE W/ LIGHT • 14” x 14” base • 28” extended height • 2 reflective strips near top: 1.5” each • 2” Red Light cone topper with stem included • 3 settings: On, Fast flash, Slow Flash • 2 AAA batteries needed (not included) • Kit is packaged in zipper carry pouch DESCRIPTION ASC-048 Road Service Safety Sign

AUTO & FLEET SERVICE WHEEL CHOCKS URETHANE WHEEL CHOCKS • SOLID LIGHTWEIGHT CONSTRUCTION • High impact urethane material • Non-conductive, no threat to puncture the tire • Durable, lightweight and easy to use • Extensively field tested RUBBER WHEEL CHOCK HIGH IMPACT URETHANE • Durable rubber construction • Features an eye bolt for chain or rope attachment • Ribbed pyramid design • Either side of wheel chock can be positioned against the tire • Sold individually • WEIGHT: 10 lb. (4.5kg) 398 396-15336 396-15300 396-15338 ASCOT NO. MFG. NO. 396-15300 15300 DESCRIPTION Rubber Wheel Chock OTR WHEEL CHOCK • DIMENSIONS: 12" x 10" x 12" • Designed for heavy duty truck and mining equipment • 20" rope attached for convenience • NET WEIGHT: 27.5 lb. 396-15342 396-15353 ASCOT NO. MFG. NO. TIRE SIZE 396-15336 15336 396-15337 396-15338 15337 15338 396-15339 15339 396-15342 396-15353 15342 15353 35" to 55" (90 cm to 140 cm) 47" to 86" (120 cm to 220 cm) 70" to 118" (180 cm to 300 cm) 110" to 165" (280 cm to 420 cm) 86" to 137.8" (220 cm to 350 cm) 47" to 70" (120 cm to 180 cm) DIMENSIONS (LXWXH) 13.3" x 8.6" x 7.8" (34 cm x 22 cm x 20 cm) 18" x 12" x 9" (47.5 cm x 30.5 cm x 22.5 cm) 22.5" x 13" x 14" (57 cm x 34 cm x 35.5 cm) 26.7" x 13" x 14" (68 cm x 33.7 cm x 35.5 cm) 24" x 13.5" x 12" (62.1 cm x 34.3 cm x 32.3 cm) 13.38" x 9.84" x 7.8" (34 cm x 25 cm x 22.5 cm) WEIGHT 7.7 lb. (3.5 kg) 13 lb. (6 kg) 19.8 lb. (9 kg) 30.86 lb. (14 kg) 24.3 lb. (11 kg) 13.66 lb. (6.2 kg) ASCOT NO. MFG. NO. 396-00102 TS102 DESCRIPTION OTR Wheel Chock 396-00102

399 AUTO & FLEET SERVICE GLOVES ASCOT POWDER-FREE MICRO DIAMOND NITRILE GLOVES • Textured finish • For industrial and automotive applications • Powder-free • THICKNESS: 6 mil not made from natural rubber latex • QUANTITY: 100 per box, 10 boxes per case • Made in Thailand ASCOT NO. MFG. NO. 396-00302 396-00303 396-00304 396-00305 396-00403 396-00404 396-00405 DESCRIPTION 32806BK240R3 32806BK240R4 32806BK240R5 32806BK240R6 32806OR240R4 32806OR240R5 32806OR240R6 Micro Diamond Black Nitrile Glove (M) Micro Diamond Black Nitrile Glove (L) Micro Diamond Black Nitrile Glove (XL) Micro Diamond Black Nitrile Glove (XXL) Micro Diamond Orange Nitrile Glove (L) Micro Diamond Orange Nitrile Glove (XL) Micro Diamond Orange Nitrile Glove (XXL) ASCOT BLACK POLYESTER WORK GLOVES • Palm coated with nitrile offers good protection from liquids, oil & grease • Excellent dexterity • Ergonomic design for a comfortable fit • 13-gauge polyester liner provides outstanding fit, feel & comfort to reduce hand fatigue • Machine washable • 12 per bag 396-50318 ASCOT NO. 396-50317 396-50318 396-50319 396-50320 MFG. NO. N/A N/A N/A N/A DESCRIPTION Black Polyester Work Gloves (Textured Palm) Black Polyester Work Gloves (Smooth Palm) Black Polyester Work Gloves (Smooth Palm Medium/Large) Black Polyester Work Gloves (Textured Palm Medium/Large) PERFORMANCE GRIP COATED WORK GLOVES • Cuff liner color represents glove size • 15 gauge nylon spandex shells are lightweight and flexible • Soft and excellent breathability • Palms coated with micro-foam nitrile and provide great grip on wet and oily surfaces • Great for applications involving handling of small parts • Excellent dexterity • Nitrile is an oil-resistant, synthetic rubber that is abrasion resistant ASCOT NO. MFG. NO. 396-50321 396-50322 396-50323 396-50324 396-50325 DESCRIPTION NLF209-S (S) RED - Performance Grip Coated Work Gloves (12/Bag) NLF209-M (M) LIGHT GREY - Performance Grip Coated Work Gloves (12/Bag) NLF209-L (L) DARK GREY- Performance Grip Coated Work Gloves (12/Bag) NLF209-XL (XL) BLACK - Performance Grip Coated Work Gloves (12/Bag) NLF2092XL (XXL) BROWN- Performance Grip Coated Work Gloves (12/Bag) 396-50325 COMING FALL 2026! 396-50317

COMING FALL 2026! HIGH VISIBILITY DUAL COLOR LEATHER DOUBLE PALM WORK GLOVES • Split leather double palm • High visibility green and orange colors • Half fleece lining • 12 pairs per package RPG MECHANIC'S GLOVES • Black synthetic leather palm with small patches • Features blue spandex on back, neoprene on knuckle, 4cm wide elastic, hook & loop 396-100 396-55223 ASCOT NO. MFG. NO. 396-55223 DESCRIPTION AB-HVDC High Visibility Dual Color Leather Double Palm Gloves ASCOT NO. DESCRIPTION 396-10011 RPG Mechanic's Gloves AUTO & FLEET SERVICE GLOVES 400 MISCELLANEOUS HAND PROTECTIVE GLOVES 396-06780 396-40317 396-55220 ASCOT NO. DESCRIPTION 396-06780 Wet Grip Neoprene Glove. Protects Against Acids,Caustics, Oils, Greases And Many Solvents. 5-Piece Flannel Liner 396-40317 396-55220 Power Grip with Latex Premium Grip Leather Palm Glove with Safety Cuff, Elastic

401 TIRE REPAIR MATERIALS MATERIALS TIRE REPAIR Cements, Sealants & Patches Air Buffers & Drills Tire Repair Tools & Accessories Tire Spreaders & Repair Stations Cabinets & Storage

TIRE REPAIR MATERIALS CHEMICALS & PATCHES TIRE REPAIR CHEMICALS • Fast drying • Wide brush for easy application ASCOT NO. MFG. NO. 501-90018 ASV8 501-90032 ASV32 501-90008 ASV8BL 501-90132 504-90011 DESCRIPTION Clear Chemical Vulcanizing Cement, 8 oz. (24 per case) Clear Chemical Vulcanizing Cement, Quart (6 per case) Blue Chemical Vulcanizing Cement, 8 oz. (24 per case) ASV32BL Blue Chemical Vulcanizing Cement, Quart (6 per case) ABSG 504-90032 ABS32 504-90005 ABS5G Black Bead Sealer, Gallon (4 per case) Black Bead Sealer, Quart (6 per case) Black Bead Sealer, 5-Gallon 504-90016 ARS16BK Black Inner Liner Sealer, 16 oz. (12 per case) 505-90032 ABU32 Inner Liner Cleaner, Quart (12 per case) 504-90005 Black Bead Sealer, 5-Gallon 504-90011 Black Bead Sealer, Gallon 505-90032 Inner Liner Cleaner, Quart (12 per case) 402 EZ CHECK LEAK DETECTOR • Finds leaks in all tires • Environmentally friendly • Excellent foam formation • Skin friendly • Commercial use only 504-90016 501-90032 Black Inner Liner Sealer, 16 oz. Clear Chemical Vulcanizing Cement, Quart 501-90018 Clear Chemical Vulcanizing Cement, 8 oz. 433-25430 433-25431 501-90132 ASCOT NO. MFG. NO. 433-25430 433-25431 2543 2543-1G DESCRIPTION Ascot EZ Check Leak Detector, Quart (12 per case) Ascot EZ Check Leak Detector, Gallon (4 per case) Blue Chemical Vulcanizing Cement, Quart 504-90032 Black Bead Sealer, Quart 501-90008 Blue Chemical Vulcanizing Cement, 8 oz.

403 TIRE REPAIR MATERIALS CHEMICALS & PATCHES LEAD WIRE PULL THROUGH PATCH/PLUG • Easiest and most popular method to fill a nail-hole and apply a patch in one simple step • Lead-wire guides the rubber stem through injury • Stem coated with self vulcanizing material and patch features Versacure bonding gum • Applications: For tread area of bias and radial passenger and truck tires PUSH THROUGH PATCH/PLUG • One-piece molded rubber patch/plug unit with a metal quill that protects the stem from damage during insertion • Applications: For tread area of bias and radial passenger and truck tires 587-01150 587-01309 ASCOT NO. MFG. NO. 587-01150 587-01151 587-01152 QS50R QSR1 QSR2 ASCOT NO. MFG. NO. 587-01303 587-01306 587-01309 M-3 M-6 M-9 DESCRIPTION 1/8" Plug-N-Patch (48 Per Box) 1/4" Plug-N-Patch (24 Per Box) 3/8" Plug-N-Patch (24 Per Box) M6B & M9B PATCH PLUGS • Grey cushion gum • Wrapped in blue poly • Quantity: 24 per box, 63 boxes per case QUILL & LEAD WIRE TYPES PATCH PLUGS • Quill and lead wire types • Repair using chemical vulcanizing cement DESCRIPTION 1/8" Quill Patch Plug (48 Per Box) 1/4" Quill Patch Plug (24 Per Box) 1/4" Quill Patch Plug (48 Per Box) 587-90003 587-90016 587-90066 587-01406 ASCOT NO. MFG. NO. 587-90003 587-90016 AQ3 A3W 587-90018 587-90033 587-01409 587-90066 587-90088 ASCOT NO. MFG. NO. 587-01406 M6B 587-01409 M9B DESCRIPTION 1/4" Plug-N-Patch: Grey Cushion Gum, Blue Wrap (24 per Box, 63 Boxes per Case) 3/8" Plug-N-Patch: Grey Cushion Gum, Blue Wrap (24 per Box, 63 Boxes per Case) 587-90099 587-90110 A9D A8W A6D A8D A6W A3D DESCRIPTION Quill Type Combination Repair: 3/16" Wrapped Stem Lead Wire Combination Repair: 3mm Stem, 2" Cap Wrapped Stem Lead Wire Combination Repair: 6mm Stem, 2" Cap Lead Wire Dipped Stem Combination Repair: 2" Repair Size, 1/8" Dia. Stem, 1/8" Injury Lead Wire Dipped Stem Combination Repair: 2" Repair Size, 5/16" Dia. Stem, 1/4' Injury Lead Wire Dipped Stem Combination Repair: 2" Repair Size, 3/8" Dia. Stem, 5/16" Injury Lead Wire Dipped Stem Combination Repair: 2" Repair Size, 1/2" Dia. Stem, 3/8" Injury Wrapped Stem Lead Wire Combination Repair: 9mm Stem, 2" Cap QTY./ BOX 24 — — 24 24 24 24 —

TIRE REPAIR MATERIALS CHEMICALS & PATCHES HEAVY DUTY TIRE REPAIR CABINET Features sliding storage drawers with rollers. • SIZE: 19.6" x 10" x 26" • 2 shelves inside (3 storage levels) • 2 tool hook sets on two inside doors • 2 sliding storage drawers with rollers • Switch-to-open handle • Additional lower storage shelf Included • WEIGHT: 36 lbs. • NEW AND IMPROVED DESIGN! ASCOT NO. MFG. NO. 719-12001 DESCRIPTION TBG-WC12001 Heavy Duty Tire Repair Cabinet 404 719-12001 BIAS HEAVY DUTY UNITS • ASB series is a cord reinforced soft gum repair • ACB series is a cord reinforced repair with hard blue gum • Repair with chemical vulcanizing cement Ascot No. 564-90012 564-90013 564-90014 564-90022 564-90111 Mfg. No. ASB2 ASB3 ASB4 ACB2HD ACB1HD Description Bias Heavy Duty: 2-7/8" (20 per box) Bias Heavy Duty: 4-5/8" (10 per box) Bias Heavy Duty: 5-3/8" (10 per box) Bias Heavy Duty: 2-7/8" (20 per box) Bias Heavy Duty: 2-1/2" (20 per box) 564-90111 Bias Heavy Duty (2-1/2") 564-90012 Bias Heavy Duty Unit (2-7/8") 564-90013 Bias Heavy Duty Unit (4-5/8") 564-90014 Bias Heavy Duty Unit (5-3/8")

405 TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES RADIAL HEAVY DUTY TRUCK UNITS • ACX series is a cord reinforced hard blue gum repair (For radial repairs only) • ASX series is a cord reinforced soft gum repair (For radial tires only) Ascot No. 576-90010 576-90012 576-90014 576-90020 576-90040 576-90110 576-90111 576-90112 576-90114 576-90120 Mfg. No. ACX10 ACX12 ACX14 ACX20 ACX40 ASX10 ASX10-300 ASX12 ASX14 ASX20 Description Radial Heavy Duty: 2-1/8" x 3" (20 per box) Radial Heavy Duty: 2-3/4" x 4-1/2" (10 per box) Radial Heavy Duty: 3-3/8" x 5-1/8" (10 per box) Radial Heavy Duty: 3-1/8" x 4-7/8" (10 per box) Radial Heavy Duty: 3-7/8" x 7-5/8" (10 per box) Radial Heavy Duty: 2-1/8" x 3" (20 per box) Radial Heavy Duty: 2-1/8" x 3" (300 per box) Radial Heavy Duty: 2-3/4" x 4-1/2" (10 per box) Radial Heavy Duty: 3-3/8" x 5-1/8" (10 per box) Radial Heavy Duty: 3-1/8" x 4-7/8" (10 per box) 576-90010 Radial Heavy Duty Truck Unit (2-1/8" x 3") 576-90110 Radial Heavy Duty Truck Unit (2-1/8" x 3") STRAND TIRE REPAIR • Excellent emergency repair when a full service repair facility is unavailable • Produced using butyl rubber and 100% saturated cord • Excellent for golf carts, lawn mowers and ATV’s • MADE IN THE USA • QUANTITY: 10 packets per box Ascot No. Mfg. No. 571-90410 571-90705 Description VRI410 VRI705 4" Orange, 12 Strand Tire Repair (10 Packets per Box) 7" Black, 5 Strand Tire Repair (10 Packets per Box) 571-90705 7" Black, 5 Strand Tire Repair 4" Orange, 12 Strand Tire Repair TUBELESS TIRE INSERT KIT • For use on the wheel • Designed for emergency repairs • Fast and easy application • Made in the USA by Western States/Elgi 518-90060 TUBELESS TIRE INSERT KIT CONTAINS: • 1 HD chrome T-Handle slot eye inserter w/ replaceable needle • 1 HD chrome T-Handle spiral probe w/ replaceable probe Ascot No. 518-90060 Mfg. No. ATS60K • 60 brown string inserts • 1 plug lubricant • 1 razor knife Description Tubeless Tire Insert Kit Tubeless Tire Insert Kit

TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES HEAVY DUTY 8" AUTOMOTIVE REPAIR INSERT KIT • For use on the wheel • Everything needed to make temporary, emergency repairs to most flat tires caused by nails or other objects up to 1/4" • KIT INCLUDES: (30) 8" temporary inserts, metal t-handle insertion tool, metal t-handle probe, lubricant, cutting blade, Allen wrench and instructions • Blow molded case for easy storage 518-90030 HEAVY DUTY 4" AUTOMOTIVE REPAIR INSERT KIT • For use on the wheel • Everything needed to make temporary, emergency repairs to most flat tires caused by nails or other objects up to 1/4" • 51890130 KIT INCLUDES: (30) 4" temporary inserts, metal t-handle insertion tool, metal t-handle probe, lubricant, cutting blade, Allen wrench and instructions • 518-90160 KIT INCLUDES: (60) 4" temporary inserts, metal t-handle insertion tool, metal t-handle probe, lubricant, cutting blade, Allen wrench and instructions • Blow molded case for easy storage 406 ASCOT NO. MFG. NO. 518-90030 DESCRIPTION ATS30K-HD Heavy Duty 8" Automotive Repair Insert Kit - 30 Repairs BROWN, 12 STRAND TIRE REPAIR INSERT W/ BLUE PAPER BACKING • 8" brown • Made in the USA • Extended shelf life • No leaks • 3rd party testing • EPA approved • Durable cord body • 100% butyl saturation • 6 repairs per packet • 5 packets per box 518-90160 FOR EASY, TEMPORARY REPAIRS 571-91964 ASCOT NO. MFG. NO. 518-90160 DESCRIPTION ATR60K-HD Heavy Duty 4" Automotive Repair Insert Kit - 60 Repairs 571-91968 ASCOT NO. MFG. NO. 571-91964 ATS1964 571-91968 ATS1968 DESCRIPTION 4” Brown, 12 Strand Tire Repair Insert w/ Blue Paper Backing 8” Brown, 12 Strand Tire Repair Insert w/ Blue Paper Backing ! Ascot Supply Corp. does not recommend “temporary” tire repairs. All repairs should perform the function of filling or replacing the injured section as recommended by the RMA and other industry associations.

407 TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES PREMA CABINETS • Custom Design Passenger Kits, Truck Kits and Cabinets are available upon request PTB Empty Toolbox PC-2 Combi Repair Units (15) PUS-2 Universal Square Patches (20) PCS-2 Stem w/Guide Wire (20) PFC-8 Ultra Fast Dry Cement PPC-16 Pre-Buff Cleaner Spray (16oz) PLOS-16 Innerliner Overbuff (16oz) CC-6 Carbide Cutter 6068 Adapter for CC-6 ASCOT NO. MFG. NO. 518-29140 DESCRIPTION 2009140 Prema Passenger/Light Truck Kit INDUSTRY STANDARD TRUCK KIT • Conveniently packaged industry standard repair kits 518-29140 PARTS INCLUDED PARTS INCLUDED PARTS INCLUDED PSCS Spiral Cement Tool 932 Tire Scraper 6004 1/8" Stitcher 6014 Brass Brush 101000929 Flex Knife 62W White Crayon PREMA Nailhole Repair Procedures PREMA Combi Wall-Poster PREMA PASSENGER/ LIGHT TRUCK KIT • All items come in a durable plastic case 518-00502 518-29150 PARTS INCLUDED PARTS INCLUDED PARTS INCLUDED PT-2 Small Round Tube (2) PT-3 Medium Round Tube PT-4 Large Round Rube PR-110 Radial (2) PR-112 Radial (2) PR-120 Radial PUR-2 Universal Round PUS-3 Universal Round PPC-16 Spray Pre-Buff PLOS-16 Liner Sealant PLD-32 Leak Detector ASCOT NO. MFG. NO. 518-00502 PCAB-2 PCS-2 Wire Lead Stem PCS-3 Wire Lead Stem PC-2 Wire Lead Combi PC-3 Wire Lead Combi PC-4 Wire Lead Combi CC-6 Cutter CC-8 Cutter CC-10 Cutter Prema Cabinet PFC-8 Cement Fast Dry PBS-32 Bead Sealer DESCRIPTION Pre-Packaged Cabinet Kit ASCOT NO. MFG. NO. 518-29150 DESCRIPTION 2009150 Industry Standard Truck Kit PARTS INCLUDED PARTS INCLUDED PARTS INCLUDED PC-2 Combi Repair Units (15) PC-3 Combi Repair Units (10) PUS-3 Universal Square Patch 3 (20) PUS-4 Universal Square Patch 4 (20) PCS-2 Stem w/Guide Wire (20) PCS-3 Stem w/Guide Wire (20) PFC-8 Ultra Fast Dry (8oz) PPC-16 Prebuff Cleaner Spray (16oz) PLOS-16 Innerliner Overbuff (16oz) CC-6 Carbide Cutter CC-8 Carbide Cutter 6068 Adapter for CC-6 6069 Adapter for CC-8 PSCS Spiral Cement Tool 932 Tire Scraper 6004 Stitcher 1/8" 6014 Brass Brush 101000929 Flex Knife 62W White Crayon PREMA Nailhole Repair Procedures PREMA Combi Wall-Poster

TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES PREMABOND BRUSH CEMENT (FLAMMABLE) • For mold-cure and precure retreading and repairing • Higher viscosity formulation designed for application by brush or swab directly onto the substrate • Specially formulated to be used in the application of fill rubber for buzz-outs, repair patch installation and tire retreading operations • High green tack • Excellent bonding strength • Formulated for heat & pressure type cures (Do not use for room temperature cure conditions!) • Promotes strong bond between the fill rubber and tire • SHELF LIFE: 1 year from date of manufacture in unopened original container PREMASOL RUBBER SOLVENT (FLAMMABLE) • Best for removing contaminants from rubber surfaces and for tire injury repair preparation • Compatible with both PREMABOND Brush Cement and PREMABOND Spray Cement • Fast drying • Contains no carcinogens • SHELF LIFE: 1 year from date of manufactur in unopened original container 408 502-16005 506-16005 HIGH VISCOSITY FAST DRYING ASCOT NO. MFG. NO. 502-16005 DESCRIPTION PBCB-5G Premabond Brush Cement (Flammable) - 5-Gallon ASCOT NO. MFG. NO. 506-16005 PREMABOND CEMENT SPRAY (FLAMMABLE) • For mold-cure and pre-cure retreading and repairing • Lower viscosity formulation designed for application by spray equipment systems • Specially formulated to be used in the application of fill rubber for buzz-outs, repair patch installation and tire retreading operations • High green tack • Excellent bonding strength • Formulated for heat & pressure type cures (Do not use for room temperature cure conditions!) • Promotes strong bond between the fill rubber and tire • SHELF LIFE: 1 year from date of manufacture in unopened original container DESCRIPTION PSRS-5G Premabond Brush Cement (Flammable) - 5-Gallon PREMABOND AQUAS CEMENT • Environmentally friendly cement for tire retreading 502-16015 LOW VISCOSITY ASCOT NO. MFG. NO. 502-16015 DESCRIPTION PBCS-5G Premabond Brush Cement (Flammable) - 5-Gallon ASC OT NO. MFG. NO. 503-16005 DESCRIPTION PBAC-5G Premabond Aquas Cement - 5-Gallon 503-16005

409 TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES TUBE REPAIRS AND REPLACEMENT VALVES • Manufactured with soft Prematack cushion gum rubber that provides maximum green tack • Use a repair at least 1/2 inch (12mm) larger than the injury on each side • Install with Prema Ultra Fast dry vulcanizing cement ASCOT NO. MFG. NO. 541-00502 541-00522 541-00503 541-00533 541-00504 541-00544 541-00505 541-00506 541-00507 PT-2 PT-2T PT-3 PT-3T PT-4 PT-4T PT-5 PT-6 PT-7 DESCRIPTION Small Round Repair Small Round Repair Medium Round Repair Medium Round Repair Large Round Repair Large Round Repair Maxi Round Repair Giant Round Repair Small Oval Repair L (IN.) 1-3/4" 1-3/4" 2-1/4" 2-1/4" 3" 3" 4-1/2" 5" 3" W (IN.) L (MM) W (MM) 44 44 57 57 76 76 - - - - - - - - 1-1/2" 114 127 76 - - - - - - - - 38 QTY./UNIT 40 160 (tub) 40 100 (tub) 25 75 (tub) 10 10 25 PROVIDES MAXIMUM GREEN TACK UNIVERSAL BIAS/RADIAL REPAIRS • Designed for repairing nail hole injuries in tubeless Bias & Radial injuries in the crown area only • Available in either round or square versions • Installs with Prema Ultra Fast dry Vulcanizing Cement ASCOT NO. MFG. NO. 550-00501 550-00502 550-00503 550-00522 550-00533 550-01533 PUR-1 PUR-2 PUR-3 PUS-2 PUS-3 PUS-3 BULK 550-00534 PUS-4 DESCRIPTION Universal Rd. 1 — — — — L (IN.) W (IN.) L (MM) W (MM) DIA. (IN.) DIA. (MM) QTY./UNIT 1-1/4 Universal Rd. 2 — — — — 2 Universal Rd. 3 — — — — 3 1-3/4 1-3/4 2-1/4 2-1/4 2-1/4 2-1/4 Universal Sq. 2 Universal Sq. 3 Universal Sq. 3 Universal Sq. 3 3 3 44 57 57 76 44 57 57 76 32 51 — — — — 76 — — — — 100 50 50 100 100 1000 50 COMBI UNITS AND STEMS • Combi repairs can be used for crown injuries only • Stems should be used when the angle of the injury is GREATER THAN 25°. Repair with the appropriate two-piece stem and repair unit. Combi units may only be used when the angle of the injury is LESS THAN 25°. If the injury angle is GREATER THAN 25°, repair with the appropriate two-piece stem and repair unit INJURY SIZE ASCOT NO. MFG. NO. 582-00501 582-00502 582-00503 582-00504 582-00522 582-00533 582-00544 PC-1 PC-2 PC-3 PC- 4 PCS-2 PCS-3 PCS-4 DESCRIPTION Combi 1 Combi 2 Combi 3 Combi 4 Stem 2 w/Guide Wire Stem 3 w/Guide Wire Stem 4 w/Guide Wire CUTTER CC-3 CC-6 CC-8 CC-10 CC-6 CC-8 CC-10 (IN.) 1/8" 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" (MM) 3 6 8 10 6 8 10 QTY./UNIT 40 15 10 10 20 20 20

TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES EMERGENCY INSERTS • Prema inserts are a temporary measure to be used until the tire can be properly repaired in a full service facility • Install with Prema Insert Cement PRE-BUFF CLEANER • Formulated to remove contaminants (such as silicone and mold lubricants) from the innerliner of the tire prior to buffing • Available in either liquid or aerosol • Contains no ozone depleting chemicals ASCOT NO. MFG. NO. 585-00501 PRI-1 585-00502 585-00504 PRI-2 PRI-4 DESC. PremaFill: Passenger/ Light Truck Thin Orange PremaFill: Passenger/ Light Truck Regular Blue PremaFill: Earthmover Blue ULTRA FAST DRY VULCANIZING CEMENT • Formulated to provide outstanding performance when used in conjunction with PREMATACK materials • Contains no ozone depleting chemicals ASCOT NO. MFG. NO. 505-00516 PPC-16 505-00532 PPC-32 DESCRIPTION Pre-Buff Cleaner “Aerosol” (Flammable) Pre-Buff Cleaner (Flammable) 501-00508 501-00532 ASCOT NO. MFG. NO. 501-00508 501-00532 PFC-8 PFC-32 DESCRIPTION Vulcanizing Cement Vulcanizing Cement FL. OZ. 8 32 ML. QTY./BOX 237 946 10 10 ASCOT NO. MFG. NO. 505-05320 PLOS-16 DESCRIPTION Innerliner Overbuff Sealant INNERLINER OVERBUFF SEALANT • Designed to restore air retention qualities to the buffed innerliner around the repair after installations • Can be used in both COLD and HOT vulcanizing systems • Contains no ozone depleting chemicals 505-05320 FL. OZ. 16 ML. QTY./BOX 10 473 32 946 10 FL. OZ. 16 ML. QTY./BOX 12 473 INJURY SIZE (IN.) (MM) 3-3/4" 3-3/4" 95 95 7-1/2" 191 QTY./UNIT 50 50 25 AVAILABLE IN LIQUID OR AEROSOL 505-00516 505-00532 410 BEAD SEALER TIRE TALC • Use when repairing or changing tube type tires • Helps prevent tubes from sticking, chaffing and pinching 504-00132 ASCOT NO. MFG. NO. 504-00132 PBS-32 504-01132 PBSO-32 DESCRIPTION Bead Sealer Spread-On (Flammable) Bead Sealer Paint-On (Flammable) 504-01132 FL. OZ. 32 32 ML. QTY./BOX 946 10 946 10 ASCOT NO. MFG. NO. 507-00501 PTT-1 DESCRIPTION Tire Talc OZ. 16 507-00501 GM. QTY./BOX 12 454

411 TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES RADIAL REPAIRS - PASSENGER AND TRUCK • Center-Over-Injury repairs are designed for use in the crown, shoulder and sidewall area of radial tires • They can be installed by either chemical (COLD) vulcanization or heat & pressure (HOT) methods • For COLD application, install using PREMA Ultra Fast Dry Vulcanizing Cement • PR115 is used in place of PR110 in heavy duty applications • PR113 is used in place of PR112 in heavy duty applications ASCOT NO. MFG. NO. 575-05109 575-15109 575-05110 PR-109 PR-109T PR-110 575-15110 PR-110 Bulk 575-05111 575-05112 PR-110T PR-112 575-25112 PR-112 Bulk 575-15112 575-05113 575-05114 575-05115 575-05120 575-15120 PR-112T PR-113 PR-114 PR-115 PR-120 PR-120 Bulk 575-05122 575-05124 575-05125 575-05126 575-05135 575-05140 575-05142 575-05144 PR-122 PR-124 PR-125 PR-126 PR-135 PR-140 PR-142 PR-144 DESC. Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial L (IN.) W (IN.) L (MM) W (MM) # PLIES 2 2 3 3 3¼ 3¼ 3¼ 43/4 43/4 43/4 5 5¼ 3¼ 5 5 7 83/4 5¼ 103/4 7½ 73/4 103/4 13¼ 2¼ 2¼ 2¼ 3 3 3 3¼ 3¼ 3 3¼ 3¼ 3¼ 3¼ 43/4 3¼ 5½ 43/4 5½ 5½ 77 77 83 83 83 121 121 121 127 133 95 127 127 178 222 133 273 191 197 273 337 50 50 57 57 57 76 76 76 83 89 76 83 83 83 83 121 83 140 108 140 140 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 3 4 3 4 4 BOX 20 80 20 1000 80 10 500 40 10 10 10 10 500 10 10 10 10 10 10 5 5 575-05109 CAN BE INSTALLED BY HOT OR COLD METHODS RADIAL REPAIRS - AGRICULTURAL • Designed for the extreme flexing of radial rear farm tires • These repair units can be used for repairing crown, shoulder and sidewall injuries • Install with PREMA Ultra Fast Dry Vulcanizing Cement ASCOT NO. MFG. NO. 574-05180 574-05182 574-05184 574-05186 PR-180 PR-182 PR-184 PR-186 DESC. Radial Ag Radial Ag Radial Ag Radial Ag L (IN.) W (IN.) L (MM) W (MM) # PLIES 6-1/4" 8" 9-3/4" 7-3/4" 8-3/4" 12" 13-3/4" 10" 203 248 305 349 159 197 222 254 2 3 3 3 QTY./UNIT 5 5 2 1

TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES BIAS REPAIRS - PASSENGER AND TRUCK • Designed with large ply construction for repairing all bias-ply tube and tubeless tires • These repairs can be used for repairing crown, shoulder and sidewall injuries • They can be installed by either chemical (COLD) vulcanization or heat and pressure (HOT) methods • For COLD application, install using PREMA Ultra Fast Dry Vulcanizing Cement L ASCOT NO. MFG. NO. 562-00501 562-00502 562-00503 562-00504 562-00505 562-00506 562-00507 562-00508 562-00509 562-00511* PB-1 PB-2 PB-3 PB-4 PB-5 PB-6 PB-7 PB-8 PB-9 PB-11* DESC. Bias Bias Bias Bias Bias L (IN.) W (IN.) 2-1/4" 3-1/4" 3-3/4" - - 3-3/4" Bias 6-1/2" Bias 4-3/4" 4-3/4" 4-3/4" 4-3/4" 6-1/2" 9-3/4" 9-3/4" Bias 11-3/4" Bias 13-3/4" 17-3/4" Bias (MM) 57 83 96 121 121 W (MM) - - 96 121 121 165 165 248 248 11-3/4" 298 298 13-3/4" 17-3/4" 349 349 451 451 # PLIES 1 2 2 2 4 4 6 6 6 8 QTY./ UNIT 25 10 10 10 10 10 5 5 5 2 *PB-11 is a made-to-order item. BIAS REPAIRS - AGRICULTURAL • Designed for use in all types of farm implement bias tires • These repair units can be used for repairing crown, shoulder and sidewall injuries • Install with PREMA Ultra Fast Dry Vulcanizing Cement L ASCOT NO. MFG. NO. 568-00500 568-00501 568-00502 568-00503 568-00504 568-00505 568-00506 568-00507 PBT-0 PBT-1 PBT-2 PBT-3 PBT-4 PBT-5 PBT-6 PBT-7 DESC. Bias Bias L (IN.) W (IN.) 7-3/4" 7-3/4" 8-3/4" 8-3/4" Bias 10-3/4" 10-3/4" Bias 14-1/4" Bias 14-1/4" 8-3/4" 8-3/4" Bias 10-3/4" 10-3/4" Bias 14-1/4" 14-1/4" Bias 20-1/2" 20-1/2" (MM) W (MM) 197 197 222 222 273 273 362 362 222 222 273 273 362 362 521 521 # PLIES 4 4 4 4 6 6 6 6 QTY./ UNIT 5 5 5 5 5 5 2 2 DESIGNED WITH LARGE PLY 412 Please contact us for more information regarding CEMENTS, SEALANTS & PATCHES.

413 TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES PREMA HEAT CURE RADIAL REPAIRS ASCOT NO. 575-01110 575-01115 575-01120 575-01122 575-01124 575-01125 575-01126 575-01135 575-01140 575-01142 575-01144 MFG. NO. DESC. PR-110-HC PR-115-HC PR-120-HC PR-122-HC PR-124-HC PR-125-HC PR-126-HC PR-135-HC PR-140-HC PR-142-HC PR-144-HC Heat Cure Radial Repair Unit Heat Cure Radial Repair Unit Heat Cure Radial Repair Unit Heat Cure Radial Repair Unit Heat Cure Radial Repair Unit Heat Cure Radial Repair Unit Heat Cure Radial Repair Unit Heat Cure Radial Repair Unit Heat Cure Radial Repair Unit Heat Cure Radial Repair Unit Heat Cure Radial Repair Unit L (IN.) 3¼ 3¼ 5 7 83/4 5¼ 103/4 7½ 73/4 103/4 13¼ W (IN.) 2¼ 3 3¼ 3¼ 3¼ 43/4 3¼ 5½ 43/4 5½ 5½ L (MM) 83 95 127 178 222 133 273 191 197 273 337 W (MM) 57 76 83 83 83 121 83 140 108 140 140 # PLIES 1 1 2 2 2 2 3 4 3 4 4 QTY./BOX 20 10 10 10 10 10 10 10 10 10 10 PREMA HEAT CURE BIAS REPAIRS PREMA HEAT CURE UNIVERSAL BIAS/RADIAL REPAIRS 562-01503 562-01504 ASCOT NO. MFG. NO. 562-01503 DESC. PB-3-HC 562-01504 PB-4-HC 562-01505 PB-5-HC Heat Cure Bias Repair Unit Heat Cure Bias Repair Unit Heat Cure Bias Repair Unit 562-01505 L (IN.) W (IN.) L (MM) W (MM) # PLIES 96 33/4 43/4 43/4 33/4 43/4 43/4 121 121 96 121 121 2 2 4 QTY./UNIT 10 10 10 ASCOT NO. MFG. NO. 550-00125 DESC. 550-00125 UHC-2.5 Bias/ Radial DIAM. (IN.) 2-3/4" DIAM. (MM.) 70 QTY./ UNIT 50

TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES RADIAL RX REINFORCED PATCHES • Specially designed for small nail hole repair on radial passenger, performance, light truck and truck tires • Perfect for tread area and sidewall repair RAD-100 SERIES RADIAL REPAIR UNIT • REMA TIP TOP offers a variety of radial-ply repair units to meet the diverse demands of today’s passenger, truck, and OTR tire applications • Due to our fully-integrated blue bonding layer and center over injury design, REMA TIP TOP Radial-Ply repair units are suitable for use with all current vulcanizing systems • For best results, always select the corresponding REMA TIP TOP Stem insert unit, carbide cutter and Special Cement BL (non flammable) or Special Blue Cement (flammable) product for a permanent, reliable repair 571-00011 414 571-00010 ASCOT NO. MFG. NO. 571-00010 RAD-0 571-00011 RAD-1N DESCRIPTION Reinforced Nail Hole Patch Reinforced Nail Hole Patch SIZE (IN.) 1-9/16" x 1-9/16" 2-3/4" x 2" QTY./ UNIT 10 20 SECTION REPAIR ID PATCHES • Universally accepted method for marking section repairs on radial truck tires • Blue triangle identification patches are a must for any dealer, retreader or fleet performing sidewall, shoulder or tread area section repairs UNIVERSAL ACCEPTED METHOD 569-00090 ASCOT NO. MFG. NO. 569-00090 569-00091 90 90B DESCRIPTION Section ID Patches Section ID Patches QTY./UNIT 50 1000 ASCOT NO. MFG. NO. 575-00110 575-00115 575-00116 576-00120 576-00122 576-00124 576-00125 576-00128 576-00135 576-00140 576-00142 576-00144 577-00146 577-00150 577-00152 577-00155 577-00156 577-00160 577-00162 577-00165 577-00168 577-00175 577-00180 577-00182 577-00184 577-00185 577-00186 577-00188 577-00190 DESCRIPTION RAD-110 RAD-115 RAD-116 RAD-120 RAD-122 RAD-124 RAD-125 RAD-128 RAD-135 RAD-140 RAD-142 RAD-144 RAD-146 RAD-150 RAD-152 RAD-155 RAD-156 RAD-160 RAD-162 RAD-165 RAD-168 RAD-175 RAD-180 RAD-182 RAD-184 RAD-185+ RAD-186 RAD-188 RAD-190 Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit PLIES 1 1 1 2 2 2 3 3 4 3 4 4 4 5 5 5 7 7 7 6 7 8 2 3 3 8 2 2 2 SIZE (IN.) 2 x 2-3/4 3-1/2 x 3 2-5/8 x 4 4-7/8 x 3 6-7/8 x 3 8-1/2 x 3 4-1/2 x 4-7/8 2-7/8 x 13-1/8 5-7/8 x 8 7-7/8 x 3-15/16 10-1/4 x 5 13 x 5 7-1/4 x 17-1/4 23 x 7-1/8 23 x 9-1/2 10-1/4 x 13-1/8 29 x 10-1/2 40 x 10-1/4 13 x 41-1/4 13-1/8 x 16-3/4 14 x 30-3/8 18 x 21-3/4 7-3/4 x 6 10 x 7-1/2 11-1/2 x 8-1/2 28-3/4 x 20-7/8 13-1/2 x 9-3/4 18 x 11-1/4 22 x 15-3/8 QTY./ UNIT 20 20 10 10 10 10 10 10 10 10 10 10 5 5 3 5 3 3 1 3 1 3 5 5 5 1 5 5 3

415 TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES RADIAL TIRE REPAIR UNITS (ARAMID) • Today’s varied tire designs, unique wheel applications and demanding driving conditions require a broad range of tire repair products. REMA TIP TOP’s ARAMID repair units are lightweight, provide optimal flexibility and will prove to be the most reliable truck repair units you have ever handled • For best results, always select the corresponding REMA TIP TOP Stem insert unit, carbide cutter & Special Blue Cement (flammable) for a permanent, reliable repair • Precise contour suits critical positions in low-profile tires • High strength ARAMID belts do not elongate, thus reducing repair bulge RAD 500 ARAMID REPAIR UNITS FOR AGRICULTURAL TIRES • Easier application due to an increased flexibility • Less heat generation • Optimized weight, therefore less influence on the tires balance and a better rolling behavior • Better dynamic behavior which avoids tensions between tire and patch • Repair material for the new generation of Agricultural tires (high speed, low pressure) • Can be used in a Chemical or Heat Cure environment EASIER APPLICATION LIGHT IN WEIGHT, FLEXIBLE & RELIABLE Magnified view of the 576-00535 ASCOT NO. MFG. NO. 576-00581 ASCOT NO. MFG. NO. 576-00531 RAD-531 Aramid 576-00533 576-00535 576-00537 576-00539 RAD-533 Aramid RAD-535 Aramid RAD-537 Aramid RAD-539 Aramid DESCRIPTION Radial Repair Unit for Low Profile Tires Radial Repair Unit for Low Profile Tires Radial Repair Unit for Low Profile Tires Radial Repair Unit for Low Profile Tires Radial Repair Unit for Low Profile Tires SIZE (IN.) 3-7/16 x 6-1/2 4-3/8 x 8 4-3/8 x 10 4-3/8 x 11-1/4 4-1/2 x 12-3/4 QTY./UNIT 10 10 10 10 576-00589 10 RAD-589 ARAMID 576-00583 576-00585 576-00587 RAD-581 ARAMID RAD-583 ARAMID RAD-585 ARAMID RAD-587 ARAMID Radial Repair Unit for Agricultural Tires Radial Repair Unit for Agricultural Tires Radial Repair Unit for Agricultural Tires Radial Repair Unit for Agricultural Tires Radial Repair Unit for Agricultural Tires 23.75 x 13.5 603 x 343 3 18 x 11.3 458 x 288 5 14.25 x 9.1 363 x 233 5 10 x 8 258 x 203 5 8.2 x 6.6 208 x 168 5 DESCRIPTION SIZE (IN.) SIZE (MM) QTY./ UNIT

TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES REMA RED EDGE TUBE PATCHES • Feature double-scalloped feathered edges to ensure perfect bonding and complete vulcanization • A unique rubber compound allows the patch to stretch evenly and equally in all directions • Use vulcanizing fluid 203 or 204 REMA STEM INSERTS AND ACCESSORIES • REMA TIP TOP’s pre-cured, self-vulcanizing inserts are specially contoured for easy installation • For best results always select the corresponding REMA TIP TOP repair unit, carbide cutter and Special Blue Cement (flammable) for a permanent, reliable repair 416 582-19420 541-00410 541-00400 541-00420 582-19621 541-00440 541-00450 541-00430 541-00470 541-00460 541-00472 ASCOT NO. MFG. NO. 541-00400 541-00410 541-00420 541-00430 541-00440 541-00450 541-00460 541-00470 541-00472 0 1 2 3 4 5 6 7 7B DESCRIPTION 1-1/4" Round Tube 1-1/2" Round Tube 1-3/4" Round Tube 2" Round Tube 3" Round Tube 3-3/4" Round Tube 4" Round Tube 3" x 1-1/2" Oval Tube 6" x 2" Oval Tube UNITS/BOX 100 30 30 30 30 10 10 ASCOT NO. MFG. NO. 582-19621 582-19820 582-19420 582-19430 582-19311 30 10 582-19410 468-01120 RS-8 RS-10 RS-12 194 VT-1120L DESCRIPTION 193-WL-10 REMA STEM 6 (Wire Lead) REMA STEM 8 REMA STEM 10 REMA STEM 12 193-WL-50 REMA STEM 6 (Wire Lead) INJURY (IN.) QTY./UNIT max 1/4 10 max 5/16 max 3/8 max 1/2 max 1/4 REMA STEM 8 (RS-8) max 5/16 Insertion Pulling Wires (626) 60 20 20 50 10

417 TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES REMA MINICOMBI REPAIR UNITS & ACCESSORIES • REMA TIP TOP’s most popular unit for crown repair of passenger/ light truck tires • Our MINICOMBI’s are available in a wide range of sizes and establish new standards in one-piece repair technology • For best results always use with REMA TIP TOP carbide cutters and Special Blue Cement (flammable) for a permanent, reliable repair • Improved Blue coating enhances the bonding process UNIVERSAL PATCH • REMA TIP TOP’s rubber-reinforced, universal repair units are specially formulated to provide maximum flexibility and strength • These non-directional, center over injury repair units perform flawlessly in both radial or bias-ply tire designs • For best results, always select the corresponding REMA TIP TOP Stem insert unit, carbide cutter and Special Blue Cement (flammable) product for a permanent, reliable repair MAXIMUM FLEXIBILITY MAXIMUM STRENGTH ASCOT NO. MFG. NO. 537-00190 537-00199 581-67050 581-67010 581-67045 581-67340 581-67308 581-68008 581-68020 581-68418 581-68406 190 199 A3 A3-R A4.5 A6 A6-R B8-MC B8-MC-R B10 B10-R DESCRIPTION UNITS/ BOX Awl for Remastem & Minicombi Repairs Rasp for Remastem & Minicombi Repairs 1/8" Minicombi 1/8" Minicombi 3/16" Minicombi 1/4" Minicombi 1/4" Minicombi 5/16" Minicombi 5/16" Minicombi 3/8" Minicombi 3/8" Minicombi — — 50 10 40 40 8 20 8 20 6 ASCOT NO. MFG. NO. 550-26707 550-26714 550-26721 550-26738 550-26745 550-26752 UP-3 UP-4.5P UP-6 UP-6P UP-8 UP-8P SIZE 1/8" 3/16" 1/4" 1/4" 5/16" 5/16" QTY. 100 300 in Pail 50 200 in Pail 50 150 in Pail

TIRE REPAIR MATERIALS COMBI-UNITS WITH PILOT WIRE A small diameter steel pilot wire is molded into the plugs on these CombiUnits. When the wire and stem are inserted through the injury, the plug fills the injury and the patch seals the innerliner. Install with KX-511F flammable chemical cement. USE IN CONJUNCTION WITH CC-6, CC-10 CARBIDE CUTTERS. ASCOT NO. 582-00386 582-01386 582-00387 582-00388 MFG NO. KX-386 KX-386 Deluxe KX-387 KX-388 DESCRIPTION KX-386 KX-386 Deluxe (CC-3 Carbide Cutter 1/8" included, 1/box) Small Round Medium Round STEM SIZE IN. (MM) 1/8 (3) 1/8 (3) ¼ (6) 3/8 (10) CARBIDE CUTTER CC-3 CC-3 CC-6 CC-10 BOX/ QTY 24 24 25 25 CEMENTS, SEALANTS & PATCHES 418 PATCH-N-PLUGS REINFORCED - FOR RADIAL TIRES The Radial Patch-N-Plug vulcanizes to the innerliner and fills the injury. Install with KX-511F flammable chemical cement. USE IN CONJUNCTION WITH CC-6, CC-10 CARBIDE CUTTERS. ASCOT NO. 587-00375 587-00376 MFG. NO. KX-375 KX-376 DESCRIPTION Small Reinforced Medium Reinforced STEM SIZE IN. (MM) ¼ (6) 3/8 (10) CARBIDE CUTTER CC-6 CC-10 BOX/QTY 25 25 PATCH-N-PLUGS NON-REINFORCED Rubber Patch-N-Plugs are recommended for the repair of radial and bias ply passenger tires. The all-rubber construction provides maximum flexibility and easy installation. Install with KX-511F flammable chemical cement. USE IN CONJUNCTION WITH CC-6, CC-10 CARBIDE CUTTERS. ASCOT NO. 587-00381 587-00382 MFG. NO. KX-381 KX-382 DESCRIPTION Small Round Medium Round STEM SIZE IN. (MM) ¼ (6) 3/8 (10) CARBIDE CUTTER CC-6 CC-10 BOX/QTY 25 25 STEM UNITS WITH PILOT WIRE A small diameter pilot wire is molded into the stem unit for easy insertion into the tire. After insertion, the properly selected patch is installed over the stem creating a permanent repair. Install with Part No. 511F flammable chemical cement. USE IN CONJUNCTION WITH CC-6, CC-10 CARBIDE CUTTERS, and KX-5102, KX-5103 FABRIC REINFORCED UNIVERSAL PATCHES. ASCOT NO. 582-00378 582-00379 MFG. NO. KX-378 KX-379 DESCRIPTION 1/4" Stem with Pilot Wire 3/8" Stem with Pilot Wire STEM SIZE IN. (MM) ¼ (6) 3/8 (10) CARBIDE CUTTER CC-6 CC-10 BOX/QTY 20 20

419 TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES MX RADIAL PATCHES MX center over the injury radial repair units are designed for use in crown, shoulder (passenger & truck tire), or sidewall (truck tire) repairs. Install with KX-511F flammable chemical cement. ASCOT NO. 575-00012 MFG. NO 575-00010 KX-MX10 KX-MX12 575-00014 KX-MX14 575-00020 KX-MX20 575-00022 KX-MX22 575-00024 KX-MX24 575-00040 KX-MX40 575-00042 KX-MX42 575-00044 KX-MX44 DESCRIPTION COI MX Radial COI MX Radial COI MX Radial COI MX Radial COI MX Radial COI MX Radial COI MX Radial COI MX Radial PATCH SIZE INCH PATCH SIZE MM 17/8 x 27/8 48 x 73 2¼ x 4¼ 3 x 5 3 x 5 3 x 57/8 33/8 x 8 COI MX Radial 4 ¼ x 73/4 51/8 x 101/8 51/8 x 13 57 x 108 75 x 125 75 x 125 75 x 150 85 x 200 100 x 200 130 x 257 130 x 330 BOX/QTY 20 10 10 10 10 10 10 10 10 BIAS PLY PATCHES Tire cord reinforced Bias Ply patches for repair in passenger, truck and agricultural Bias Ply tires. Install with KX-511F flammable chemical cement. ASCOT NO. MFG. NO 562-00470 KX-470 562-00471 562-00472 562-00473 562-00474 KX-471 KX-472 KX-473 KX-474 DESCRIPTION Bias Ply Repair Bias Ply Repair Bias Ply Repair Bias Ply Repair Bias Ply Repair PATCH SIZE INCH 33/4 x 33/4 (2 Ply) 41/8 x 41/8 (2 Ply) 5½ x 5½ (3 Ply) 8¼ x 8¼ (4 Ply) 93/4 x 93/4 (6 Ply) PATCH SIZE MM 95 x 95 105 x 105 140 x 140 210 x 210 248 x 248 BOX/QTY 20 10 10 10 10

TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES FABRIC REINFORCED UNIVERSAL PATCHES These Universal Tire Repair patches are reinforced with tire cord for added strength. For non-directional installation. Recommended for puncture repairs in the tread area of the tires. Use on both bias & radial tires. Install with KX-511F flammable chemical cement. ASCOT NO. 550-05101 550-05102 550-05103 PART # KX-5101 KX-5102 KX-5103 DESCRIPTION Small Round Medium Round Large Round PATCH SIZE INCH 19/16 2¼ 31/8 PATCH SIZE MM 40 57 80 BOX/QTY 120 100 50 420 RUBBER REINFORCED UNIVERSAL PATCHES Universal patches are reinforced with rubber for added strength. Recommended for puncture repairs in the tread area of radial or bias tires. Install with Part No. 511F flammable chemical cement. ASCOT NO. 550-04101 550-04102 550-04103 550-00045 550-00055 550-00155 PART # KX-4101 KX-4102 KX-4103 KX-UP45 550-00145 KX-UP45P KX-UP55 KX-UP55P DESCRIPTION Small Round Medium Round Large Round Square Universal Patch Square Universal Patch Square Universal Patch Square Universal Patch PATCH SIZE INCH 15/8 2¼ 3¼ 13/4 13/4 21/8 21/8 PATCH SIZE MM 42 57 82 44 44 54 54 BOX/QTY 1000 1000 1000 30 Pail of 300 30 Pail of 200 JIFFY PATCHES Rubber patches for repairing injuries to tubes and rubber products. Install with KX-511F flammable chemical cement. ASCOT NO. PART # 541-00001 KX-001 541-00002 KX-002 541-00003 KX-003 DESCRIPTION Small Round Medium Round Large Round PATCH SIZE INCH 15/8 2¼ 31/8 PATCH SIZE MM 42 57 80 BOX/QTY 40 40 25

421 TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES SUPER FAST DRYING CEMENT • Super fast drying cement for use with all KEX patches and plugs INNERLINER REPAIR SEALANT • Properly applied, Repair Sealant creates an airtight seal around a finished repair, over buffed areas or porous tire innerliners • Prudent use of Innerliner Repair Sealant maintains the integrity of the repair • CFC-free formula requires shorter drying times • It can be used in both COLD and HOT vulcanizing systems. ASCOT NO. PART NO 501-00511 KX-511F DESCRIPTION Flammable Chemical Cement (8 oz.) BOX/QTY 10 ASCOT NO. MFG NO. 505-00508 KX-508F DESCRIPTION Liner Sealer, with brush cap (Flammable) SIZE 16 fl. oz. BOX/QTY 10 LEAK DETECTOR TIRE TALC • KEX Spray-On Leak Detector makes locating air leaks easier! • Available in a ready-to-use spray bottle, or a concentrate • Ideal for locating Air Leaks • Quick/ Easy Application • Can be used on all types of Tires, Tubes, Valves and Rims. Specially formulated for trouble-free tube installation, reduces folding and sticking which contributes to friction within the tire. ASCOT NO. PART NO. DESCRIPTION 433-00032 KLD-32 Leak Detector (Ready to use) SIZE 32 oz. spray bottle BOX/QTY 10 ASCOT NO. MFG NO. 507-00550 KX-550 DESCRIPTION Tire Talc SIZE 1 lb shaker can BOX/QTY 10 PRE-BUFF CLEANERS RIM & BEAD SEALER (FLAMMABLE) KEX Pre-Buff Cleaners are specially formulated to dissolve mold-release lubricants and other contaminants creating a clean surface prior to innerliner buffing. Available in spout-top liquid or spray-top aerosol dispensers. Use Pre-Buff Cleaners in conjunction with scraping tool 932 to dissolve and remove lubricants and contaminents from the innerliner before buffing. • CFC-free formula requires shorter drying times. • Same formula for tube or tire preparation. ASCOT NO. PART NO. 505-00491 505-00490 KX-491F KX-490F DESCRIPTION Pre-Buff Cleaner, Aerosol (Flammable) Pre-Buff Cleaner (Flammable) SIZE 11.1 oz. net wt. spray can 32 fl. oz. spout can BOX/QTY 12 504-00507 10 KX-507F ASCOT NO. MFG NO. DESCRIPTION Bead Sealer, Flammable, No-Drip Formula SIZE 32 fl. oz. can BOX/QTY 10 • Rim & Bead Sealer is designed to prevent leaks between the tire and rim • Designed to be applied to tire beads during the mounting process • Ideally suited for use with new or old tires • CFC-free formula requires shorter drying times.

TIRE REPAIR MATERIALS Scan For Nail Hole Procedures AGRICULTURAL AND OTR TIRES/ PN SERIES BIAS-PLY REPAIR UNITS • 90° cord angle of the plies provides greater compatibility with the flexing action of the tire as it operates under load, plus it also makes the patch more flexible for easier installation • A new concept in rubber compounding of the ply-end cover strip eliminates cord breakout at the end of the plies • Two different ply levels for each size patch provide better compatibility of the repair unit to the ply rating of the tire • Flexibility in patch/injury size optimization for improved performance • Eliminates need for “S” (Sidewall) patches in the smaller sizes • Reduced buffing requirement due to the smaller size of the patch • Use Blue Bonding cement CEMENTS, SEALANTS & PATCHES REMA TIP TOP BIAS-PLY TIRE REPAIR UNITS • REMA TIP TOP offers a wide selection of bias-ply (cross-ply) repair units for applications on passenger, truck, OTR, agricultural and industrial bias-ply tires • Due to our fully-integrated blue bonding layer, REMA TIP TOP bias-ply repair units are suitable for use with all current vulcanizing systems • For best results, always select the corresponding REMA TIP TOP Stem insert unit, carbide cutter and Special Blue Cement (flammable) for a permanent, reliable repair MORE FLEXIBLE 422 568-05000 # 568-05200 568-05400 # ASCOT NO. MFG. NO. 568-05000 568-05010 568-05200 568-05210 568-05400 568-05410 568-05600 568-05610 567-05620 568-05800 568-05810 567-05820 567-05821 PN-50 PN-050+ PN-052 PN-052+ PN-054 PN-054+ PN-056 PN-056+ PN-056S PN-058 PN-058+ PN-058S PN-058S+ SIZE (IN.) 9-1/2" 9-1/2" 14" 14" 19" 19" 26" 26" 26" 32" 32“ 32" 32“ SIZE (MM) 240mm 240mm 360mm 360mm 480mm PLIES 4 6 6 8 8 480mm 10 660mm 10 660mm 12 660mm 10 810mm 810mm 810mm 810mm 12 14 12 14 QTY./ BOX 3 3 3 3 2 2 2 2 2 1 1 1 1 ASCOT NO. MFG. NO. 562-26006 562-26037 562-26044 562-26051 562-26068 562-26075 562-26082 562-26099 562-26109 563-00200 563-00210 563-00220 563-00230 563-00240 563-00250 563-00400 563-00410 563-00420 562-26212 562-26213 562-26314 562-26315 PN-0 PN-3 PN-4 PN-5 PN-6 PN-7 PN-8 PN-9 PN-10 PN-20 PN-21 PN-22 PN-23 PN-24 PN-25 PN-40 PN-41 PN-42 FRU1-MP FRU1-P FRU2-MP FRU2-P SIZE (IN.) 1-9/16 4 5-3/4 6-1/2 9-1/4 11-3/4 13-1/2 15-1/2 17-3/4 10 14-1/2 20 10 14-1/2 20 7 8-3/4 10-1/4 2-1/2 2-1/2 3-1/4 3-1/4 SIZE (MM) 39.7 101.6 146 165 235 298.5 343 393 450.8 254 368.3 508 254 368.3 508 177.8 222.3 260.3 63 63 82.55 82.55 PLIES 1 2 2 4 6 6 6 8 8 4 4 4 6 6 6 4 6 8 1 1 2 2 QTY./ BOX 50 10 10 10 10 10 5 3 3 10 5 3 10 5 3 2 2 2 25 100 25 100

423 TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES REMA GTR RADIAL REPAIR UNITS • These repair units are designed for use in section repairs in RADIAL OTR TIRES • They are intended for use in heat cure systems (Autoclaves, Section Molds, Molds or Strap Type Curing Systems) • Their “center over injury” design makes them a very convenient and easy type of repair • Used with uncured black floater gum, they provide added adhesion in all types of repairs • SHELF LIFE FOR UNCURED & HEAT CURE REPAIR UNITS: 1 Year from Date of Manufacture; Clothback REPAIR UNITS: 4 Years from Date of Manufacture FOR RADIAL OTR TIRES REMA GTR BASKET RADIAL REPAIR UNITS "CENTER OVER INJURY" DESIGN • These repairs are designed to give the needed flexibility and extra support for shoulder and sidewall injuries of RADIAL OTR TIRES • They provide the ability to repair larger injuries than standard radial “center over the injury” repair units • SHELF LIFE FOR UNCURED & HEAT CURE REPAIR UNITS: 1 Year from Date of Manufacture; Clothback REPAIR UNITS: 4 Years from Date of Manufacture FOR RADIAL OTR TIRES "CENTER OVER INJURY" DESIGN 526-10052 525-10138 526-12046 525-11348 # ASCOT NO. MFG. NO. DESCRIPTION SIZE (IN.) SIZE (MM) GTR RADIAL REPAIR UNITS - UNCURED 526-10046 10 046 RU GTR - UC 46 16 x 5 405 x 125 526-10050 10 050 RU GTR - UC 50 22 x 7.5 560 x 190 526-10052 10 052 RU GTR - UC 52 22 x 9.5 560 x 240 526-10056 10 056 RU GTR - UC 56 28 x 10.5 710 x 265 526-10060 10 060 RU GTR - UC 60 38 x 10.5 965 x 265 GTR RADIAL REPAIR UNITS - HEAT CURE 526-12046 12 046 RH GTR - HC 46 16 x 5 405 x 125 526-12050 12 050 RH GTR - HC 50 22 x 7.5 560 x 190 526-12052 526-12056 12 052 RH GTR - HC 52 22 x 9.5 560 x 240 12 056 RH GTR - HC 56 28 x 10.5 710 x 265 526-12060 12 060 RH GTR - HC 60 38 x 10.5 965 x 265 GTR RADIAL REPAIR UNITS - CLOTHBACK 12 046 RC GTR - CB 46 16 x 5 405 x 125 12 050 RC GTR - CB 50 22 x 7.5 560 x 190 12 052 RC GTR - CB 52 22 x 9.5 560 x 240 12 056 RC GTR - CB 56 28 x 10.5 710 x 265 12 060 RC GTR - CB 60 38 x 10.5 965 x 265 526-12146 526-12150 526-12152 526-12156 526-12160 4 5 6 7 8 4 5 6 7 8 4 5 6 7 8 5 5 2 2 2 5 5 2 2 2 5 5 2 2 2 # ASCOT NO. MFG. NO. DESCRIPTION 525-10136 10 016 BRU GTR-B - UC 016 SIZE (IN.) SIZE (MM) GTR BASKET RADIAL REPAIR UNITS - UNCURED 16 x 5 405 x 125 525-10137 10 020 BRU GTR-B - UC 020 20 x 9 510 x 230 525-10138 10 027 BRU GTR-B - UC 027 27 x 10 685 x 255 525-10139 10 038 BRU GTR-B - UC 038 38 x 10 965 x 255 GTR BASKET RADIAL REPAIR UNITS - HEAT CURE 12 016 BRH GTR-B - HC 016 525-11345 12 027 BRH GTR-B - HC 027 16 x 5 405 x 125 525-11346 12 080 BRH GTR-B - HC 020 20 x 9 510 x 230 525-11347 525-11348 525-11349 525-11350 525-11351 525-11352 16 x 5 405 x 125 27 x 10 685 x 255 12 038 BRH GTR-B - HC 038 38 x 10 965 x 255 GTR BASKET RADIAL REPAIR UNITS - CLOTHBACK 12 016 BRC GTR-B - CB 016 12 020 BRC GTR-B - CB 020 20 x 9 510 x 230 12 027 BRC GTR-B - CB 027 27 x 10 685 x 255 12 038 BRC GTR-B - CB 038 38 x 10 965 x 255 PLIES 5 5 2 2 5 5 2 2 5 5 2 2 QTY./ BOX 6 6 7 7 6 6 7 7 6 6 7 7 PLIES QTY./ BOX

TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES REMA OTR BASKET BIAS REPAIR UNITS • The OTR-B-UC unit is engineered and constructed to create maximum flexibility • The ply strips are positioned in a basket weave pattern creating the strength and flexibility needed for reinforcement or section repair • SHELF LIFE FOR UNCURED & HEAT CURE REPAIR UNITS: 1 Year from Date of Manufacture; Clothback REPAIR UNITS: 4 Years from Date of Manufacture MAXIMUM FLEXIBILITY COLD VULCANIZING FLUID • Designed for the vulcanization of tube patches, valve patches and rubber-based tube valve repair units BASKET WEAVE PATTERN ASCOT NO. MFG. NO. 501-00201 501-00202 501-00203 201 202 203-F 501-00204 501-00205 526-11118 ASCOT NO. MFG. NO. DESCRIPTION 526-11136 # SIZE (IN.) SIZE (MM) OTR BASKET BIAS REPAIR UNITS - UNCURED 526-11115 10 104 BU OTR-B - UC 04 7.5 x 7.5 190 x 190 10 526-11116 10 106 BU OTR-B - UC 06 9.75 x 9.75 245 x 245 526-11117 10 108 BU OTR-B - UC 08 12.25 x 12.25 310 x 310 526-11118 10 110 BU OTR-B - UC 010 14.25 x 14.25 360 x 360 5 526-11119 10 112 BU OTR-B - UC 012 16.25 x 16.25 410 x 410 526-11120 10 114 BU OTR-B - UC 014 18.25 x 18.25 465 x 465 526-11121 10 116 BU OTR-B - UC 016 20.25 x 20.25 515 x 515 526-11122 10 118 BU OTR-B - UC 018 22.75 x 22.75 575 x 575 526-11123 10 120 BU OTR-B - UC 020 26.75 x 26.75 680 x 680 1 OTR BASKET BIAS REPAIR UNITS - HEAT CURE 5 5 2 1 526-11124 12 104 BH OTR-B - HC 04 7.5 x 7.5 190 x 190 10 526-11125 12 106 BH OTR-B - HC 06 9.75 x 9.75 245 x 245 526-11126 12 108 BH OTR-B - HC 08 12.25 x 12.25 310 x 310 526-11127 12 110 BH OTR-B - HC 010 14.25 x 14.25 360 x 360 5 526-11128 12 112 BH OTR-B - HC 012 16.25 x 16.25 410 x 410 526-11129 12 114 BH OTR-B - HC 014 18.25 x 18.25 465 x 465 526-11130 12 116 BH OTR-B - HC 016 20.25 x 20.25 515 x 515 526-11131 12 118 BH OTR-B - HC 018 22.75 x 22.75 575 x 575 526-11132 12 120 BH OTR-B - HC 020 26.75 x 26.75 680 x 680 1 OTR BASKET BIAS REPAIR UNITS - CLOTHBACK 5 5 2 1 10 10 10 10 4 6 6 8 8 10 10 12 14 4 6 6 8 8 10 10 12 14 526-11133 12 104 BC OTR-B - CB 04 7.5 x 7.5 190 x 190 10 526-11134 12 106 BC OTR-B - CB 06 9.75 x 9.75 245 x 245 526-11135 12 108 BC OTR-B - CB 08 12.25 x 12.25 310 x 310 526-11136 12 110 BC OTR-B - CB 010 14.25 x 14.25 360 x 360 5 526-11137 10 10 12 112 BC OTR-B - CB 012 16.25 x 16.25 410 x 410 5 5 2 1 526-11138 12 114 BC OTR-B - CB 014 18.25 x 18.25 465 x 465 526-11139 12 116 BC OTR-B - CB 016 20.25 x 20.25 515 x 515 526-11140 12 118 BC OTR-B - CB 018 22.75 x 22.75 575 x 575 526-11141 12 120 BC OTR-B - CB 020 26.75 x 26.75 680 x 680 1 4 6 6 8 8 10 10 12 14 ASCOT NO. MFG. NO. 505-00071 505-00170 505-00171 71 70F 71-F 532-06020 532-06021 6020 6021 DESCRIPTION PLIES QTY./ BOX PRE-BUFF CLEANER • Specially formulated to dissolve moldrelease lubricants and other contaminants creating a clean surface prior to innerliner buffing • Available in spout-top liquid or spray-top aerosol dispensers • CFC-free formula requires shorter drying times • Same formula for tube or tire preparation 505-00171 QTY./ BOX Pre-Buff Rubber Cleaner 1 Qt. Spout Top Can 6 Pre-Buff Cleaner (Flammable) - 16 Oz. Pre-Buff Cleaner (Flammable) - 1 Qt. Spout Top Can 16 Oz. Aluminum Cement Dispenser with Brush Top Replacement Brush Lid for 6020 Cement Dispenser 1 — 12 6 204-F 205 DESCRIPTION Cold Vulcanizing Fluid 25 Gm. Tube Cold Vulcanizing Fluid 50 Gm. Tube w/Brush Cold Vulcanizing Fluid, Flammable, 8 Oz. Can w/ Brush Cold Vulcanizing Fluid, Flammable, 32 Oz. Can Cold Vulcanizing Fluid 1 Gallon 501-00203 501-00204 QTY./ BOX 1 1 10 10 1 424 REMA TIRE TALC • Specially formulated for trouble-free tube installation, reduces folding and sticking which contributes to friction within the tire ASCOT NO. MFG. NO. DESCRIPTION 507-00063 63 Rema Tire Talc, 1 Lb. Shaker Top QTY./BOX 10 507-00063

425 TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES SPECIAL CEMENT BL™ • The key to REMA TIP TOP’s exclusive Blue Bonding System, Special Cement BL creates a nearly indestructible bond between tire and repair unit • Specifically designed for the application of REMA TIP TOP Radial, Bias-Ply and Universal, Minicombi & RemaStem repair units • Use for chemical installation of REMA TIP TOP blue bonding layer repair units, Blue Floater Gum and chemical vulcanizing compounds • REMA TIP TOP’s newest Special Blue Cement (flammable) is free of CFC and aromatic compounds A&B COMPOUND REPAIR SYSTEM (FLAMMABLE) • REMA TIP TOP’s Vulc Compound has no equal when it comes to cold vulcanization injury filling • Equal quantities of A compound and compound, thoroughly mixed, produce a durable permanent repair 502-40541 502-51388 501-50300 CREATES ULTRA STRONG BOND ASCOT NO. MFG. NO. 502-40541 BL-8F 502-51388 BL-32F DESCRIPTION QTY./ BOX Special Blue Cement (flammable), 8 Oz. Brush Top Can Special Blue Cement (flammable), 32 Oz. Can 12 6 501-51300 RIM/BEAD SEALER AND INNERLINER REPAIR SEALANT • REMA TIP TOP offers two distinct Bead Sealer formulations designed to prevent leaks between the tire and rim • Designed to be applied to tire beads during the mounting process • Ideally suited for use with new or old tires • No drip formula is highly viscous with an extended shelf life • CFC-free formula requires shorter drying times • Properly applied, Repair Sealer creates an airtight seal around a finished repair, over buffed areas or porous tire innerliners • Prudent use of Repair Sealer maintains the integrity of the repair.vulcanizing uncured rubber • Flammable Version Available: F Series • No Drip Version available: ND Series ASCOT NO. MFG. NO. 501-50300 50F 501-51300 51F DESCRIPTION A+B VULC COMPOUND KIT: 650g can of A compound; 650g can of B compound; 1 can Special Cement BL (CFC Free), 225g A+B VULC COMPOUND KIT: 300g can of A compound; 300g can of B compound; 1 can Special Cement BL (CFC Free), 40g each 505-00176 504-09600 OTR-F CEMENT (FLAMMABLE) PREVENT LEAKS BETWEEN TIRE & RIM • Specifically designed for the chemical application of REMA TIP TOP Radial (RAD) and Bias Ply (PN) repair units • Optimizes the service performance of long haul earthmover and agricultural tires ASCOT NO. MFG. NO. 504-09600 960F 504-09601 505-00176 960ND 76F DESCRIPTION Rim & Bead Sealer w/Brush Cap. CFC-Free Formula (Flammable) 32 Oz. Rim & Bead Sealer w/Brush Cap. No Drip Formula - 32 Oz. Can Innerliner Sealer Can (Flammable) - 16 Oz. QTY./ BOX 6 6 6 ! CAUTION Use all tire repair chemicals in a well ventilated area. Avoid prolonged breathing or inhalation of vapors. ASCOT NO. MFG. NO. 500-00096 OTR-F DESCRIPTION OTR-F Cement (flammable) 500-00096

TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES REMABOND CEMENT (FLAMMABLE) • For Mold-Cure and Pre-Cure Retreading and Repairing • Specially formulated to be used in the application of Fill Rubber for buzz-outs, repair patch installation, and tire retreading operations MULTIPLE TEMPERATURE RUBBER (MTR) & BLACK CUSHION GUM REPAIR PRODUCT • REMA TIP TOP offers a v uncured rubber MTR produc excellent green tack and outs flow & vulcanization char ASCOT NO. MFG. NO. 526-51618 5161180 ASCOT NO. MFG. NO. 502-26005 502-26001 502-26015 502-26011 DESCRIPTION 16 RBB 5G Remabond Brush Cement (Flammable) - 5-Gallon 16 RBB D Remabond Brush Cement (Flammable) - 54-Gallon 16 RBS 5G Remabond Spray Cement (Flammable) - 5-Gallon 16 RBS D Remabond Spray Cement (Flammable) - 54-Gallon REMASOL RUBBER SOLVENT (FLAMMABLE) • Best for removing contaminants from rubber surfaces and for tire injury repair preparation • Totally compatible with both REMABOND Brush Cement and REMABOND Spray Cement • Fast drying • Contains no carcinogens • SHELF LIFE: 1 Year from Date of Manufacture in unopened original container ASCOT NO. MFG. NO. 506-26005 506-26015 DESCRIPTION 16 RS 5G Remasol Rubber Solvent (Flammable) - 5-Gallon 16 RS D Remasol Rubber Solvent (Flammable) - 54-Gallon 526-55610 526-55630 526-55672 5561 5563 DESCRIPTION MTR Cut Resistant Rope Rubber, OTR Repairs, 26.5 Lb. Pail MTR Cushion Gum, 24' x 10" x 0.050", 6 Lbs. MTR Cushion Gum, 2600mm x 30mm x 3mm, 2 Lbs. 5567-26.5 MTR Rope Rubber, OTR Repairs, 26.5 Lb. Pail REMA CUSHION GUMS • SHELF LIFE: 1 Year from Date of Manufacture (*except Butyl Repair Gum, SHELF LIFE: 6 Months from Date of Manufacture) 525-15213 SIZE (W X ASCOT NO. MFG. NO. 525-15116 15 1116 S 525-15216 525-15213 525-15413 525-15181 REMABOND REPAIR CEMENT (FLAMMABLE) • REMABOND Repair Cement is made in a convenient 1 gal. size ideal for repair stations ASCOT NO. MFG. NO. 500-01602 DESCRIPTION 525-15286 15 18116 BRG 16 RBR 1G REMABOND Repair Cement 525-15288 15 1818 FG 525-15418 525-15188 525-15186 525-15914 15 2116 S 15 2132 CG 15 4132 CG 15 18132 CG 15 418 CG 15 1818 CG DESC. Stripping Stock Stripping Stock Cushion Gum Cushion Gum Cushion Gum Cushion Gum Cushion Gum 15 18116 UG Universal Gum 15 914 UG Universal Gum Butyl Repair Gum* Floater Gum 18 x 1/8 455 x 3.00 RTT-B 10 THICKNESS) (INCH) SIZE (W X THICKNESS) (MM) 1 x 1/16 25 x 1.50 2 x 1/16 50 x 1.50 2 x 1/32 50 x 0.80 CURE RATE RTT-B RTT-B RTT-B 4 x 1/32 100 x 0.80 RTT-B 525-15116 426 WT./ BOX (LBS.) 35 35 35 35 18 x 1/32 455 x 0.80 RTT-B 10 4 x 1/8 100 x 3.00 RTT-B 35 18 x 1/8 455 x 3.00 RTT-B 20 18 x 1/16 455 x 1.50 RTT-B 10 9 x 1/4 230 x 6.00 RTT-B 40 18 x 1/16 455 x 1.50 RTT-C 10

427 TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES REMA REPAIR CORD • SHELF LIFE: 1 Year from Date of Manufacture SIZE (W X ASCOT NO. MFG. NO. 526-15283 15 AR 28364 RTT-A 10' @ 280F 20' @ 260F DESC. 526-15293 15 NY 29364 Nylon Tire Cord Aramid Tire Cord RTT-B CURE RATES 20' @ 280F 35' @ 260F 20' @ 280F 40' @ 260F 30' @ 280F 50' @ 260F ASCOT NO. MFG. NO. 523-18160 523-18146 523-18206 REMA ROPE RUBBER • SHELF LIFE (18ER & 18ERS - EXTRUDER ROPE): 4 Months from Date of Manufacture, SHELF LIFE (18OR - OTR ROPE & 18TR - TREAD ROPE): 6 Months from Date of Manufacture 523-18712 523-18758 523-18860 523-18858 523-18960 523-18914 523-18912 523-18915 523-18856 523-18212 523-18512 526-18001 523-18101 18 10120 OTR PCC DP 523-18220 18 12120 OTR PCC DP 523-18412 18 14120 OTR PCC DP 526-18002 523-18161 ASCOT NO. 526-18001 526-18002 526-18003 MFG. NO. 18ER 18TR SIZE DESC. Extruder Rope Tread Rope (INCH) CURE RATE 3/8 Diameter RTT-A WT./BOX (LBS.) 30 18ERS Extruder Rope / Spool 3/8 Diameter RTT-A 30/Spool 3/8 Diameter RTT-B 30 18 16120 OTR PCC DP 523-18222 18 22120 OTR PCC DP 523-18262 18 26120 OTR PCC DP 525-15288 DESC. 18 100060 PCC 18 114060 PCC 523-18126 18 112060 PCC 18 200060 PCC 18 712060 PCC 18 758060 PCC 18 800060 PCC 18 858060 PCC 18 900060 PCC 18 914060 PCC 18 912060 PCC 18 914 045 PCC 18 858 046 PCC 523-18389 18 38916055 PCC 18 02120 OTR PCC DP 18 05120 OTR PCC DP Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum OTR Precure Cushion Gum Double Poly OTR Precure Cushion Gum Double Poly OTR Precure Cushion Gum Double Poly OTR Precure Cushion Gum Double Poly OTR Precure Cushion Gum Double Poly OTR Precure Cushion Gum Double Poly OTR Precure Cushion Gum Double Poly OTR Precure Cushion Gum Double Poly RTT-C RTT-D SIZE (W X THICKNESS) (INCH) (MM) 1 x 0.060 1-1/4 x 0.060 1-1/2 x 0.060 2 x 0.060 7-1/2 x 0.060 7-5/8 x 0.060 8 x 0.060 8-5/8 x 0.060 9 x 0.060 9-1/4 x 0.060 9-1/2 x 0.060 9-1/4 x 0.045 8-5/8 x 0.045 38-9/16 x 0.055 2 x 0.120 5 x 0.120 10 x 0.120 12 x 0.120 14 x 0.120 16 x 0.120 22 x 0.120 26 x 0.120 15 1818 FG Floater Gum 18 x 1/8 25 x 1.524 32 x 1.524 38 x 1.524 50 x 1.524 190 x 1.524 195 x 1.524 203 x 1.524 220 x 1.524 230 x 1.524 235 x 1.524 240 x 1.524 235 x 1.143 220 x 1.143 980 x 1.397 50 x 3.048 125 x 3.048 254 x 3.048 305 x 3.048 355 x 3.048 405 x 3.048 560 x 3.048 660 x 3.048 455 x 3.00 RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A 40 35 45 50 60 80 95 RTT-B 10 CURE RATE RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A WT./BOX (LBS.) 40 50 35 35 30 30 35 35 35 40 40 35 30 52 40 THICKNESS) (INCH) SIZE (W X THICKNESS) (MM) 29 x 3/64 735 x 1.20 28 x 3/64 710 x 1.20 CURE RATE WT./ BOX (LBS.) RTT-D 20 lbs RTT-D 20 lbs REMA PRECURE CUSHION GUM • Undertread Bonding Gum • Can also be used on splices, skives, and exposed cord • Consistent Gauge • Excellent building tack and flow • Custom sizes available upon request (20 box minimum per size/gauge) • SHELF LIFE: 4 Months from Date of Manufacture

TIRE REPAIR MATERIALS SAFETY SEAL® AUTO/LIGHT TRUCK TIRE REPAIR REFILLS • 24 plies of a custom made high tensile (350 lb break strength) chemical resistant nylon yarn • Each yarn is immersed in proprietary rubber sealant system (250% rubber to yarn) • Patented manufacturing process assures the final Safety® Seal repair has an equal amount of rubber sealant (250% rubber to yarn) through-out the Safety Seal® Repair • INCLUDES: 60 4” (10cm) refill repairs per kit ASCOT NO. MFG. NO. DESCRIPTION 585-60410 SSRA 585-60410 Auto Light/Truck Tire Repair Refills - 60 4" (10 cm) Repairs SAFETY SEAL® TRUCK TIRE REPAIR REFILLS • 24 plies of a custom made high tensile (350 lb break strength) chemical resistant nylon yarn • Each yarn is immersed in proprietary rubber sealant system (250% rubber to yarn) • Patented manufacturing process assures the final Safety Seal® has an equal amount of rubber sealant (250% rubber to yarn) through-out the Safety Seal® The ATV “On The Wheel Tire Repair Kit” Gauge in use. ASCOT NO. MFG. NO. 571-22928 DESCRIPTION SSKATVTI SAFETY SEAL® TIRE REPAIR KIT repair Repair • INCLUDES: 30 8" (20cm) refill repairs per kit ASCOT NO. MFG. NO. DESCRIPTION 585-30820 SSRT 585-30820 ATV “On The Wheel Truck Tire Repair Kit” TRUCK • Includes everything to make temporary repairs to most flats caused by nails or other objects up to 1/4" • KIT INCLUDES: 30-8" (20cm) temporary repairs, Metal T-handle insertion tool, Metal T-handle spiral probe, Special lube, Extra insertion needle, Cutting blades, Allen wrench, and Instructions • Packed in a sturdy carrying case to fit easily under the seat of a truck 571-22926 Truck Tire Repair Refills - 30 8" (20 cm) Repairs ASCOT NO. MFG. NO. 571-22926 SSKTP VULCANIZED TUBELESS TIRE REPAIR SEALS • For emergency repair use only • String repairs are not designed to be used in lieu of a permanent repair • Repair a punctured tire in a matter of minutes • Made from highstrength yarn and butyl rubber 585-60541 ASCOT NO. MFG. NO. 538-60541 585-30581 585-10071 DESCRIPTION 1012O60T54TS 1012O30T58TS 105B100PD7AS 4" Orange String Repair 8" Orange String Repair 8" Thin Black String Repair QTY./BOX 60 30 100 SAFETY SEAL® TIRE REPAIR KIT 585-30581 DESCRIPTION Truck Tire Repair Kit DELUXE • For autos and light trucks • “On the Wheel” design for the professional who wants to fix a flat quickly and easily • Repairs punctures up to 1/4” and seals entire puncture from tread to inner liner • Also available in other sizes: truck, off-road and heavy equipment 571-22960 ASCOT NO. MFG. NO. 571-22960 SSKAP ! DESCRIPTION Deluxe Tire Repair Kit Ascot Supply Corp. does not recommend “temporary” tire repairs. All repairs should perform the function of filling or replacing the injured section as recommended by the RMA and other industry associations. CEMENTS, SEALANTS & PATCHES ATV “ON THE WHEEL TIRE REPAIR KIT” • Designed for outdoor enthusiasts to repair, inflate and go! • KIT INCLUDES: (1) Needle insertion tool; (6) Self-vulcanizing repairs, (1) CO2 inflator w/ two cartridges; and Instructions • Packed in a water tight display tube package that hang on a peg hook • Can repair all tubeless tires with NO cement needed 428

429 TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES EURO-STYLE UNIVERSAL REPAIR UNITS • Rubber reinforced repairs that can be applied in any repairable area of a radial or bias-ply passenger tire • Repairs a maximum injury of 1/4" when following industry recommended repair procedures • Vulcanizes either chemically or with heat USA STYLE UNIVERSAL REPAIR UNITS • For nail hole repairs in radial or bias-ply passenger tires • Chemical vulcanization only • Black vulcanizing gum, blue poly backing ASCOT NO. MFG. NO. 571-11307 571-11309 571-11311 571-11312 571-11313 11-307 11-309 11-311 11-312 11-313 DESCRIPTION Mini Square Small Square Medium Square Large Square SIZE (IN.) SIZE (MM) QTY./BOX 1-1/2 1-7/8 2-1/4 2-1/2 38 48 57 66 Small Rectangle 1-3/4 x 3 45 x 75 FEATHER-EDGE TUBE REPAIRS • Designed for repairing inner tubes (chemical vulcanization only) • Twice as strong as tube being repaired, yet, extremely flexible 50 50 50 50 10 ASCOT NO. MFG. NO. 571-11115 571-11116 571-11321 571-11322 571-11323 571-11324 571-11325 11-115 11-116 11-321 11-322 11-323 11-324 11-325 DESCRIPTION Small Square Medium Square Small Round Medium Round Large Round Small Oval Medium Oval SIZE (IN.) 1-7/8 2-1/8 1-5/8 2-1/4 3-1/4 SIZE (MM) 47 54 41 57 82 1-3/8 x 2-3/8 37 x 61 1-7/8 x 3-7/8 48 x 98 UNIVERSAL QUILLED COMBINATION UNITS • Feature rubber reinforced patch heads • Multi-directional and can be used in any repairable area of radial or bias-ply tires • Black repair unit with black vulcanizing gum • Both stem and repair unit will vulcanize chemically • Stem of combination unit is equipped with a metal quill 30 30 30 25 15 25 15 QTY./ BOX ASCOT NO. MFG. NO. 541-11000 541-11001 541-11002 541-11003 541-11004 541-11005 541-11006 541-11007 541-11008 11-000 11-001 11-002 11-003 11-004 11-005 11-006 11-007 11-008 DESCRIPTION Mini Round Small Round Medium Round Large Round Small Oval Medium Oval Large Oval Giant Round Giant Oval SIZE (IN.) 1-1/4 1-5/8 2-1/4 3-1/4 SIZE (MM) 32 43 57 82 1-3/8 x 2-3/8 35 x 60 1-3/4 x 3-3/4 45 x 97 2-1/2 x 5-5/8 65 x 144 125 5 3-3/4 x 6-1/8 95 x 155 QTY./ BOX 100 40 30 20 30 20 20 10 10 ASCOT NO. MFG. NO. 587-13381 13-381 587-13382 587-13386 587-33810 587-33811 13-382 13-386 13-381SQ 13-382SQ PATCH SIZE Round, 1-5/8" Round, 42mm Round, 2-1/8" Round, 55mm Square, 2-3/8" Square, 60mm Square, 1-5/8" Square, 42mm Square, 2-3/8" Square, 60mm STEM SIZE Round, 5/32" Round, 4mm Round, 5/16" Round, 8mm Flat, 7/16" Flat, 11mm Round, 5/32" Round, 4mm Round, 5/16" Round, 7.5mm QTY./BOX 20 15 10 20 15

TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES USA STYLE C-O-I RADIAL REPAIR DIPPED LEAD-WIRE INSERTS • Designed to fill the injury in passenger and truck, radial or bias-ply tires • Will vulcanize chemically or in the presence of a heat curing system, becoming a permanent part of the tire • Requires no special insert tool for installation 581-13621 ASCOT NO. MFG. NO. 581-13620 581-13621 581-13622 581-13623 12-413 12-412 12-414 12-415 DESCRIPTION 1/4" Dipped Lead Wire Insert 3/16" Lead Wire Insert 3/8" Lead Wire Insert 13/32" Lead Wire Insert “BN” BIAS-PLY REPAIR • Designed to be applied in any repairable area of tube or tubeless bias-ply tire • Designed for use in puncture, reinforcing or section repairs • Will vulcanize chemically or in high heating curing systems • Repairs are a unit molded style with premium blue vulcanizing gum on white Mylar backing • Fine feather-edge eliminates chaffing 581-13623 • Designed for use in puncture, reinforcement or section repairs in any repairable area of passenger, truck, agricultural or earthmover radial tires • Repair is black with gray vulcanizing gum on a blue poly backing • Each reinforced ply is individually end-wrapped to deflect tire flexing stresses in a unique manner • New tie-gum construction eliminates the potential for delamination common in competitive brands • Will vulcanize chemically or in low temperature (precure) systems 430 581-13622 QTY./BOX 20 20 20 20 EACH UNIT IS ENDWRAPPED ASCOT NO. MFG. NO. 571-11808 11-808 571-11810 571-11812 571-11814 571-11820 ASCOT NO. MFG. NO. 561-11488 561-11489 561-11490 561-11491 561-11492 561-11493 561-11494 561-11495 561-11496 561-11497 561-11498 561-11499 11-488 11-489 11-490 11-491 11-492 11-493 11-494 11-495 11-496 11-497 11-498 11-499 DESCRIPTION BN1, 1-Ply BN2, 2-Ply BN3, 2-Ply BN4, 2-Ply BN5, 2-Ply BN7, 3-Ply BN8, 3-Ply BN9, 4-Ply BN10, 6-Ply BN12, 6-Ply BN15, 8-Ply BN20, 8-Ply SIZE (IN.) SIZE (MM) 2-1/8" 3" 3-1/2" 4-1/4" 5-1/4" 6.5" 7-1/2" 8-5/8" 9-7/8" 12" 15" 20" 55 75 89 110 135 165 190 220 250 305 380 508 QTY./ BOX 30 20 20 10 10 10 10 10 5 5 3 3 571-11822 571-11824 571-11825 571-11835 571-11840 571-11842 571-11844 571-11845 11-810 11-812 11-814 11-820 11-822 11-824 11-825 11-835 11-840 11-842 11-844 11-845 DESC. Radial 10, 1-Ply Radial 10, 1-Ply Radial 12, 1-Ply Radial 14, 1-Ply Radial 20, 2-Ply Radial 22, 2-Ply Radial 24, 2-Ply Radial 25, 3-Ply Radial 35, 3-Ply Radial 40, 3-Ply Radial 42, 4-Ply Radial 44, 4-Ply Radial 45, 4-Ply 2-7/8" x 5" 3“x 6" 3" x 8-1/2" 72 x 125 75 x 150 75 x 215 4-1/2" x 5" 115 x 125 5-1/4" x 7" 133 x 180 4" x 7-3/8" 100 x 188 5" x 10" 5" x 13" 7-1/2" x 9-1/2" 125 x 254 125 x 330 190 x 240 10 10 10 10 10 10 10 10 5 2-1/4" x 4" 57 x 100 3-3/4" x 4" 95 x 100 10 10 SIZE (IN.) SIZE (MM) 1-5/8" x 3" 42 x 75 2-3/8" x 3" 60 x 75 QTY./BOX 20 20

431 TIRE REPAIR MATERIALS CEMENTS, SEALANTS & PATCHES DIPPED LEAD-WIRE COMBINATION UNITS • Requires no special wire pulling tools, just insert lead wire into the injury from the inside of the tire and pull the repair unit through from the outside • Stem and repair unit are gum-coated to provide the most complete bond, both inside the injury and on the innerliner • Will vulcanize chemically or in a heat cure system • Stem portion is dip coated, Patch has gray vulcanizing gum and blue poly backing BUFFING SOLUTION 505-14100 STEM & REPAIR UNIT ARE GUMCOATED ASCOT NO. MFG. NO. 505-14100 505-14102 14-100 14-102 DESCRIPTION Buffing Solution Aerosol Buff 505-14102 TYPE Flammable Non-Flammable SIZE 32 oz. 16 oz. SEALERS 583-13673 504-14111 ASCOT NO. MFG. NO. 583-13670 583-13672 583-13673 583-13674 13-670 13-672 13-673 13-674 PATCH SIZE 1" (27mm) 1-5/8" (42mm) 2-1/8" (55mm) STEM DIAMETER 1/8" (3.8mm) 3/16" (5mm) 1/4" (6mm) 2-1/8" (55mm) 3/8" (8.5mm) GRAY GUM LEAD-WIRE COMBINATION UNITS • Specially formulated gray gum coating over the stem QTY./BOX 20 24 24 24 ASCOT NO. MFG. NO. 504-14100 504-14104 504-14111 504-14228 14-101 14-104 14-101A 14-128A DESCRIPTION Bead Sealer Bead Sealer Bead Sealer - Heavy Duty Inner Liner Sealer CHEMICAL VULCANIZING CEMENT GRAY GUM COATING ASCOT NO. MFG. NO. PATCH SIZE 583-23672 583-23673 583-23674 583-23675 13-672G 13-673G 13-674G 13-675G STEM DIAMETER 1-5/8" (42mm) 3/16" (4.5mm) 2-1/8" (55mm) 2-1/8" (55mm) 2-1/8" (55mm) 1/4" (6mm) 5/16" (8mm) 3/8" (10mm) QTY./BOX 24 24 24 16 ASCOT NO. MFG. NO. 501-14008 501-14032 501-14511 501-14512 501-14513 501-14514 501-14515 14-008 14-032 14-511 14-512 14-513 14-514 14-515 DESCRIPTION Vulcanizing Cement Vulcanizing Cement HD Supr-Blu Cement HD Supr-Blu Cement Vulcanizing Cement Vulcanizing Cement Black Vulc. Cement TYPE Flammable Flammable Flammable Flammable Non-Flamm. Non-Flamm. Flammable SIZE 8 oz. 32 oz. 8 oz. 32 oz. 8 oz. 32 oz. 32 oz. • Offering both flammable and nonflammable cements • Flammable cements tend to dry faster • In certain regions, non-flammable cements required by law or regulation • Contains accelerators which, when coming into contact with the face gum on any “X-tra Seal™” repair unit, will begin the vulcanization process 504-14228 TYPE Flammable SIZE 1 Gal. Flammable 5 Gal. Flammable Flammble 32 Oz. 16 Oz. 501-14008 501-14515 501-14511

TIRE REPAIR MATERIALS HIGH-SPEED TIRE BUFFER WITH QUICK CHANGE CHUCK • Equipped with a quick change chuck to allow for rapid changes to a variety of tire repair tasks • APPLICATIONS: Ideal for scuffing, grinding, cleaning and many other uses requiring high speed and is equipped with safety throttle lever • Includes one quickchange adapter • FREE SPEED: 20,000 RPM • MADE IN USA QUICK CHANGE AIR BUFFERS & DRILLS LOW-SPEED TIRE BUFFER WITH QUICK CHANGE CHUCK 157-06010 ASCOT NO. MFG. NO. 157-06010 157-16010 DESCRIPTION SLP-6010 High-Speed Tire Buffer with Quick Change Chuck SLP-6010REK Above with Rear Exhaust Hose Kit ASCOT NO. MFG. NO. 157-06510 157-16510 HIGH SPEED TIRE BUFFER KIT • Jacobs chuck for holding buffing accessories • Lock-off throttle • APPLICATIONS: Tire patchwork, roughing areas for recapping and cleaning tire moldings • FREE SPEED: 20,000 RPM • MADE IN USA MADE IN THE USA ASCOT NO. MFG. NO. 157-04038 157-14038 DESCRIPTION SLP-4038 SLP-4038REK 157-04038 High-Speed Tire Buffer with Jacob’s Chuck Above with Rear Exhaust Hose Kit 158-10873 ASCOT NO. MFG. NO. 158-10873 HEAVY DUTY SKIVING TOOL • APPLICATIONS: Excellent for skiving work due to the more substantial gear package which contributes to durability • FREE SPEED: 2,800 RPM • Rear exhaust performance • Equipped with safety throttle lever • Includes one quick-change adapter • MADE IN USA ASCOT NO. MFG. NO. 157-06550 157-16550 FOR SKIVING WORK HIGH SPEED BUFFER KIT WITH QUICK CHANGE CHUCK • Quick change chuck for holding MADE IN THE USA DESCRIPTION SLP-6550 Heavy Duty Skiving Tool 157-06550 SLP-6550REK Above with Rear Exhaust Hose Kit ASCOT NO. MFG. NO. 158-11871 DESCRIPTION A871K-QC High Speed Buffer Kit with Quick Change Chuck 158-11871 buffing accessories • Lock-off throttle • FREE SPEED: 22,000 RPM • APPLICATIONS: Tire patchwork, roughing areads for recapping and cleaning tire moldings • Includes overhose kit QUICK CHANGE CHUCK DESCRIPTION A873K Low Speed Tire Buffer with Quick Change Slip Chuck JACOBS CHUCK DESCRIPTION SLP-6510 SLP-6510REK Above with Rear Exhaust Hose Kit LOW SPEED TIRE BUFFER WITH QUICK CHANGE SLIP CHUCK • Brass bushings provide performance and durability in tough working conditions • Includes whip hose and exhaust hose • Quick change slip chuck for fast and easy change of buffing wheel • Built-in regulator • Lock off throttle to prevent accidental start ups • Rear exhaust directs air away from the work area • APPLICATIONS: Ideal for patchwork, roughing areas for recapping and cleaning tire moldings • Overhose Kit also Available Separately (175-00873) QUICK CHANGE SLIP CHUCK 157-06510 Low-speed tire buffer with quick change chuck • FREE SPEED: 2,800 RPM • 90 PSI Required air pressure • 1/4"NPT. Air Inlet • 3/8" required hose size • WEIGHT: 2.25 lb. • 8.5" in length • Quick change chuck for fast change of buffing accessories 432

433 TIRE REPAIR MATERIALS AIR BUFFERS & DRILLS HIGH SPEED TIRE BUFFER WITH OVERHOSE KIT • Jacobs chuck for holding buffing accessories • Lock-off throttle • FREE SPEED: 22,000 RPM • APPLICATIONS: Tire patchwork, roughing areas for recapping and cleaning tire moldings • Includes overhose kit ASCOT NO. MFG. NO. 158-10871 A871K DESCRIPTION High Speed Tire Buffer with Overhose Kit LIGHTED LOW-SPEED BUFFER WITH QUICK-CHANGE CHUCK • Provides light inside the tire without the use of batteries or other external power sources • Volt-Aire patented technology turns the motor into a working generator to bring electricity and light to the work surface • high torque but lo speed to prevent burning of work surf • Quick-change chuck allows oper to make rapid changes to a varie tool accessories • MADE IN USA MADE IN THE USA 158-00873 LOW SPEED TIRE BUFFER KIT • Quick change slip chuck f easy change of buffing wheel • A speed regulator for pr • Lock-off throttle to pr start ups • Rear exhaus from work area • FREE SPEED: 2,800 RPM 158-10871 HIGH-SPEED TIRE BUFFER WITH JACOBS CHUCK • Provides plenty of power with it’s .5 horsepower motor and 22,000 RPM, rear exhaust performance • APPLICATIONS: Ideal for patchwork, roughing areas for recapping and cleaning tire moldings • Equipped with safety throttle lever ASCOT NO. MFG. NO. 158-00871 CP-871K DESCRIPTION High-Speed Tire Buffer with Jacobs Chuck - Includes Over Hose ASCOT NO. MFG. NO. 158-00873 CP-873K Low Speed Tire Buffer Kit - Includes Over Hose ASCOT NO. MFG. NO. 157-06520 157-16520 DESCRIPTION 157-06520 SLP-6520L Lighted Low-Speed Tire Buffer with Quick Change Chuck SLP-6520REK Above with Rear Exhaust Hose Kit ASCOT COMPOSITE LOW SPEED TIRE BUFFER W/ QUICK CHANGE SLIP CHUCK HEAVY DUTY AIR LOW SPEED TIRE BUFFER • APPLICATIONS: For quick work of patchwork and roughing up low areas for recapping, tire scuffing and cleaning tire moldings • Free speed up to 3,000 RPM • 1/2 HP motor ASCOT NO. MFG. NO. 157-01327 DESCRIPTION IR-327LSA Heavy Duty Air Low Speed Tire Buffer - Includes Over Hose ASCOT NO. 158-11873 MFG. NO. A873CK DESCRIPTION Composite Low Speed Tire Buffer w/ Quick Change Slip Chuck • Needle bearings provide performance and durability in tough working conditions • Includes exhaust hose • Quick change slip chuck for fast and easy change of buffing wheel • Lock off throttle to prevent accidental start ups • Built-in regulator • Rear exhaust directs air away from work area • Ideal for patchwork, roughing areas for recapping and cleaning tire moldings • Composite body 158-11873

TIRE REPAIR MATERIALS TIRE REPAIR TOOLS & ACCESSORIES SLOTTED FINISHING RASPS CONTOUR CUP RASPS 434 LARGE VARIETY OF SHAPES & SIZES 539-06310 539-02203 539-02206 DURABLE & EFFICIENT 539-06411 539-02207 539-02208 LARGE VARIETY OF SHAPES & SIZES ASCOT NO. MFG. NO. 539-02203 539-02204 539-02205 539-02206 539-02207 539-02208 539-02209 539-02210 539-02241 2203 GRIT 36-Grit 2204 36-Grit 2205 2206 2207 2208 16-Grit 16-Grit 36-Grit 16-Grit 2209 36-Grit 2210 2241 16-Grit 36-Grit DURABLE & EFFICIENT DESCRIPTION 2" x 3/16" Slotted Finishing Rasp 2" x 3/16" Slotted Finishing Rasp 2" x 3/8" Slotted Finishing Rasp 2" x 3/8" Slotted Finishing Rasp 2" x 1/2" Slotted Finishing Rasp 2" x 1/2" Slotted Finishing Rasp 2" x 3/4" Slotted Finishing Rasp 2" x 3/4" Slotted Finishing Rasp 2" x 1" Slotted Finishing Rasp ASCOT NO. MFG. NO. 539-06261 539-06260 539-06360 539-06361 539-06310 539-06311 539-06312 539-06313 539-06314 539-06315 539-06316 539-06317 539-06410 539-06411 539-06412 539-06413 539-06414 539-06415 539-06416 539-06417 TCW415 TCW415 TCW415 TCW415 TCW415 TCW415 TCW415 TCW415 TCW210 36-Grit TCW210 16-Grit TCW310 36-Grit TCW310 16-Grit TCW315 36-Grit TCW315 16-Grit TCW315 36-Grit TCW315 16-Grit TCW315 36-Grit TCW315 16-Grit TCW315 36-Grit TCW315 16-Grit 36-Grit 16-Grit 36-Grit 16-Grit 36-Grit 16-Grit 36-Grit 16-Grit 2"x 1-3/8" - 3/8" Arbor Hole 2"x 1-3/8" - 3/8" Arbor Hole 3" x 1" - 3/8" Arbor Hole 3" x 1" - 3/8" Arbor Hole 3" x 1-1/2" - 3/8" Arbor Hole 3" x 1-1/2" - 3/8" Arbor Hole 3" x 1-1/2" - 1/2" Arbor Hole 3" x 1-1/2" - 1/2" Arbor Hole 3" x 1-1/2" Vented - 3/8" Arbor Hole 3" x 1-1/2" Vented - 3/8" Arbor Hole 3" x 1-1/2" Vented - 1/2" Arbor Hole 3" x 1-1/2" Vented - 1/2" Arbor Hole 4" x 1-1/2"- 1/2" Arbor Hole 4" x 1-1/2" - 1/2" Arbor Hole 4" x 1-1/2" - 5/8" Arbor Hole 4" x 1-1/2" - 5/8" Arbor Hole 4" x 1-1/2" Vented - 1/2" Arbor Hole 4" x 1-1/2" Vented - 1/2" Arbor Hole 4" x 1-1/2" Vented - 5/8" Arbor Hole 4" x 1-1/2" Vented - 5/8" Arbor Hole GRIT DESCRIPTION

435 TIRE REPAIR MATERIALS TIRE REPAIR TOOLS & ACCESSORIES B&J NON-REGRITTABLE COPPER CONTOUR WHEELS • The B&J Contour Wheels have a convex contour, which has proven to be particularly suitable for repairs inside the tire • Smaller models are almost completely covered with grit on their surface, so they can be used at any angle • Also ideal for sidewall machining • The variery of grain sizes available provides an optimum surface for every application B&J NON-REGRITTABLE COPPER BUFFOUT WHEELS • Buffout Tools are ideal for all types of tire repairs • With a variety of sizes and shapes repairs can be carried out quickly and effectively • Due to the narrow tool width of 3 mm and more, the area to be repaired remains as small as necessary and saves unnecessary filling material afterwards • The special design makes the tools durable and efficient 539-10136 539-11036 539-15616 539-15816 539-10936 539-10416 539-16316 ASCOT NO. MFG. NO. 539-10116 539-10123 539-10136 539-10160 539-11016 539-11023 539-11036 539-11060 539-10916 539-10923 539-10936 539-10960 539-10416 539-10423 539-10436 539-10460 GRIT 332001-16 332001-23 332001-36 332001-60 332010-16 332010-23 332010-36 332010-60 332009-16 332009-23 332009-36 332009-60 332004-16 332004-23 332004-36 332004-60 16 Grit 23 Grit 36 Grit 60 Grit 16 Grit 23 Grit 36 Grit 60 Grit 16 Grit 23 Grit 36 Grit 60 Grit 16 Grit 23 Grit 36 Grit 60 Grit DESCRIPTION 2" x 1" Copper Contour Wheel (50 x 25mm) AH 3/8" 2" x 1" Copper Contour Wheel (50 x 25mm) AH 3/8" 2" x 1" Copper Contour Wheel (50 x 25mm) AH 3/8" 2" x 1" Copper Contour Wheel (50 x 25mm) AH 3/8" 3" x 1" Copper Contour Wheel (76 x 25mm) AH 3/8" 3" x 1" Copper Contour Wheel (76 x 25mm) AH 3/8" 3" x 1" Copper Contour Wheel (76 x 25mm) AH 3/8" 3" x 1" Copper Contour Wheel (76 x 25mm) AH 3/8" 3" x 1.5" Copper Contour Wheel (76 x 38mm) AH 3/8" 3" x 1.5" Copper Contour Wheel (76 x 38mm) AH 3/8" 3" x 1.5" Copper Contour Wheel (76 x 38mm) AH 3/8" 3" x 1.5" Copper Contour Wheel (76 x 38mm) AH 3/8" 4" x 1.5" Copper Contour Wheel (102 x 38mm) AH 3/8" 4" x 1.5" Copper Contour Wheel (102 x 38mm) AH 3/8" 4" x 1.5" Copper Contour Wheel (102 x 38mm) AH 3/8" 4" x 1.5" Copper Contour Wheel (102 x 38mm) AH 3/8" ASCOT NO. 539-15616 539-15636 539-15816 539-15836 539-16316 539-16336 539-16416 539-16436 539-16516 539-16536 MFG. NO. 332056-16 332056-36 332058-16 332058-36 332063-16 332063-36 332064-16 332064-36 332065-16 332065-36 GRIT 16-Grit 36-Grit 16-Grit 36-Grit 16-Grit 36-Grit 16-Grit 36-Grit 16-Grit 36-Grit DESCRIPTION Flat Faced Buffout Wheel 2" x 3/16" (50 x 5mm) Flat Faced Buffout Wheel 2" x 3/16" (50 x 5mm) Flat Faced Buffout Wheel 2" x 1/4" (50 x 7mm) Flat Faced Buffout Wheel 2" x 1/4" (50 x 7mm) Flat Faced Buffout Wheel 2" x 3/8" (50 x 10mm) Flat Faced Buffout Wheel 2" x 3/8" (50 x 10mm) Round Faced Buffout Wheel 2" x 1/2" (50 x 13mm) Round Faced Buffout Wheel 2" x 1/2" (50 x 13mm) Round Faced Buffout Wheel 2" x 3/4" (50 x 19mm) Round Faced Buffout Wheel 2" x 3/4" (50 x 19mm) 539-16516 539-16416

TIRE REPAIR MATERIALS B & J SUPER PATRIOT CONTOUR WHEEL • Super Patriot’s patented design is significantly efficient since cooling is achieved throughout the entire working surface of the tool due to the concave/ convex base design • Customers' feedback after using the Patriot carbides is based on the products significantly longer life vs. conventional carbides 539-28646 ASCOT NO. MFG. NO. 539-28646 DESCRIPTION 133286-460 3" X 1-1/4" CWSP 460 grit 3/8"AH TIRE REPAIR TOOLS & ACCESSORIES B & J AIRBOT BUFFOUT WHEELS • The new AIRBOT® series not only look aggressive, they also work aggressively • With their open design and the angled setup they are much more efficient in getting the job done than any predecessors • Improved cooling • Rounder buffing profile • Longer lifetime • Faster grinding cycles B & J HD BUFFOUT WHEELS • Improved durability • Aggressive and efficient • Longer lifetime then conventional “16-grit” carbides 539-18516/36 539-18616/36 436 539-18716/36 539-18816/36 539-15516 539-33010 539-33009 539-18416 539-33004 ASCOT NO. MFG. NO. 539-32056 539-32058 539-32063 539-32064 539-32065 539-33010 539-33009 539-33004 539-33017 332056-HD 332058-HD 332063-HD 332064-HD 332065-HD 332010-HD 332009-HD 332004-HD 332017-HD 539-33017 DESCRIPTION 2" x 3/16" RFBOT HD Buffout Wheel 2" x 1/4" RFBOT HD Buffout Wheel 2" x 3/8" RFBOT HD Buffout Wheel 2" x 1/2" RFBOT HD Buffout Wheel 2" x 3/4" RFBOT HD Buffout Wheel 3" x 1" Contour Wheel HD Grit 3/8" AH 3" x 1.5" Contour Wheel HD Grit 3/8" AH 4" x 1.5" Contour Wheel HD Grit 3/8" AH 4" x 1.5" Contour Wheel HD Grit 1/2" AH ASCOT NO. MFG. NO. 539-18516 DESCRIPTION 132185-16 RFBOT AIRBOT Ø2"x 3/16", AH 3/8", Grit 16 Buffout Wheel 539-18536 132185-36 RFBOT AIRBOT Ø2"x 3/16", AH 3/8", Grit 36 Buffout Wheel 539-18616 132186-16 RFBOT AIRBOT Ø2"x 1/4", AH 3/8", Grit 16 Buffout Wheel 539-18636 132186-36 RFBOT AIRBOT Ø2"x 1/4", AH 3/8", Grit 36 Buffout Wheel 539-18716 132188-16 RFBOT AIRBOT Ø2"x 1/2", AH 3/8", Grit 16 Buffout Wheel 132187-16 RFBOT AIRBOT Ø2"x 3/8", AH 3/8", Grit 16 Buffout Wheel 539-18736 132187-36 RFBOT AIRBOT Ø2"x 3/8", AH 3/8", Grit 36 Buffout Wheel 539-18816 539-18836 132188-36 RFBOT AIRBOT Ø2"x 1/2", AH 3/8", Grit 36 Buffout Wheel 539-18416 132184-16 RFBOT AIRBOT Ø4"x 1/2", AH 1/2", Grit 16 Buffout Wheel 539-18436 132184-36 RFBOT AIRBOT Ø4"x 1/2", AH 1/2", Grit 36 Buffout Wheel 539-15516 132155-16 RFBOT AIRBOT Ø6"x 1/2", AH 1/2", Grit 16 Buffout Wheel 539-15536 132155-36 RFBOT AIRBOT Ø6"x 1/2", AH 1/2", Grit 36 Buffout Wheel

437 TIRE REPAIR MATERIALS TIRE REPAIR TOOLS & ACCESSORIES TIRE REPAIR KNIVES • Rubber must be cleaned and hole injuries must be cleaned and roughened before inserting repair units 531-60570 HIGH CARBON STEEL 531-75190 FLEXIBLE FLEXIBLE TIRE REPAIR KNIFE • High carbon steel, round point skiver, glaze finish, round burnt finish handle (riveted) 531-75310 531-75150 ASCOT NO. MFG. NO. 531-60570 X751N 531-75190 537-75310 531-75200 531-75170 531-75330 531-75370 531-75440 X2T X3N X1S X2S X3S X4S X5S DESCRIPTION High carbon steel, hawk bill notch, glaze finish, round burnt finish handle (riveted) High carbon steel, taper point, glaze finish, round burnt finish handle (riveted) High carbon steel, round point, thin skiver, glaze finish, round burnt finish handle High carbon steel, square point, glaze finish, round burnt finish handle (riveted) 2-1/2" / 64mm 3" / 76mm 3-5/8" / 93mm 3-7/8" / 99mm 4-1/4" / 108mm SKIVING KNIFE 531-70030 BLADE LENGTH 2" / 51mm 4" / 102mm 4-7/8" / 124mm ASCOT NO. MFG. NO. 531-75150 X2RF DESCRIPTION High carbon steel, round point skiver, glaze finish, round burnt finish handle (riveted) BLADE LENGTH 4" / 102mm RUBBER KNIFE • High carbon steel, square point, glaze finish, round burnt finish handle (riveted) 531-71050 531-60150 ASCOT NO. MFG. NO. 531-70030 531-71050 70030 71050 ASCOT NO. MFG. NO. 531-60070 X4x1S 531-60090 531-60130 531-60150 531-60170 X5x1S X6x1S X8x11/8S X10x11/4S High carbon steel, square point, glaze finish, round burnt finish handle (riveted) DESCRIPTION BLADE LENGTH 4" x 1" / 102 x 26mm 5" x 1" / 127 x 26mm 6" x 1" / 152 x 26mm 8" x 1-1/8" / 203 x 29mm 10" x 1-1/4" / 254 x 32mm OTHER KNIVES ASCOT NO. MFG. NO. DESCRIPTION 531-60300 531-60310 531-75220 531-75310 60300 60310 75220 X3N 4" x 1" Curved Notch Repair Knife 6" x 1-1/2" 5-Notch Trim Knife 3/8" Curved Point Shoe Knife 4-7/8" Round Point Skiving Knife DESCRIPTION 4-1/2" Handle for X2 Blades 10 Replacement blades

TIRE REPAIR MATERIALS ASCOT RAZOR BLADES • 100 blades per box • Great for paint prep, glass scraping and cutting rubber • Fits all window scrapers and box cutters • Each blade is protected in wax paper • High-grade long-lasting high carbon steel edge TIRE REPAIR TOOLS & ACCESSORIES RAZOR BLADE SCRAPER W/ OFFSET HEAD • Strong, solid handle ideal for stripping paint, caulk, labels, overspray, gasket material, urethane and glue • No sharpening needed, just replace the blade • Protective cover keeps blade sharp and prevents cuts • Includes one standard single edge blade 438 537-72967 537-05246 ASCOT NO. MFG. NO. 537-05246 ASCOT NO. MFG. NO. 537-72967 RB-100 DESCRIPTION Ascot Razor Blades TIRE REPAIR AIR TOOL ACCESSORIES TIRE RELATED HAND TOOLS 537-00045 173-09400 DESCRIPTION AS-5246 Razor Blade Scraper W/ Offset Head 173-09150 537-06012 173-09165 173-09211 537-06010 537-06014 173-09212 537-06022 ASCOT NO. MFG. NO. 537-00045 537-06010 537-06012 537-06014 537-06022 45 6010 6012 6014 6022 DESCRIPTION Retreaders Brush Geared Side Cutter for Steel Cords 8" Steel Nippers Brass Brush for Cleaning Repair 9" Whetstone PROFESSIONAL HEAVY DUTY TIRE REAMERS 537-17277 ASCOT NO. MFG. NO. 537-17276 537-17277 1-R 2-R DESCRIPTION 3/16” Diameter - Blade Length - 6-3/4” 1/4” Diameter - Blade Length - 8-3/4” ASCOT NO. MFG. NO. 173-00018 173-00019 173-00020 173-00022 173-00023 173-09150 173-09165 173-09166 173-09167 173-09201 173-09202 173-09211 173-09212 173-09213 173-09214 173-09215 173-09216 173-09400 QC18 QC19 QC20 QC22 QC23 SLP-9211 173-09213 DESCRIPTION Quick Chuck Adapter W/ Collar Quick Chuck Adapter W/ Spacer 1" x 3/8" Thread Quick Chuck Adapter For 1/8" Shank Quick Chuck Adapter For 1/4" Shank Quick Chuck Adapter For 5/16" Shank SLP-9150 Jacobs 3/8" Precision Chuck and Key SLP-9165 Quick Change Chuck - 3/8"-24 Mounting Thread SLP-9166 Quick Change Chuck - 1/2"-13 Mounting Thread SLP-9167 Quick Change Chuck - 1/2"-20 Mounting Thread 1-11/16" x 3/8"-24 Chuck Adapter w/Washer & Nut SLP-9201 SLP-9202 2-3/4" x 3/8"-24 Chuck Adapter w/Nut & Wheel Spacer 1-7/8" x 3/8"-24 Threaded Adapter w/Washer & Nut SLP-9212 2-1/4" x 3/8"-24 Threaded w/ Nut & Wheel Spacer 1-15/16" Adapter w/Set Screw for 1/8" Shank SLP-9213 SLP-9214 1-15/16" Adapter w/Set Screw for 3/16" Shank SLP-9215 1-15/16" Adapter w/Set Screw for 1/4" Shank SLP-9216 1-15/16" Adapter w/Set Screw for 5/16" Shank SLP-9400 Overhose Kit 173-09215 173-09216

439 TIRE REPAIR MATERIALS TIRE REPAIR TOOLS & ACCESSORIES QUICK CHUCK ADAPTER, EXTRA LONG • Quick change extra-long adapter 3/8”-24 thread • Two flat washers, two nuts included • 1-3/4” (45mm) thread length• For rasps, buffing wheels and brushes where extra length is required DUAL HEAD QUICK CHUCK ADAPTER • Quick change extra-long adapter 3/8”-24 thread • Two flat washers, two adapters included • 1-3/4” (45mm) thread length • For rasps, buffing wheels and brushes where extra length is required 173-00024 173-00026 ASCOT NO. MFG. NO. 173-00024 DESCRIPTION AS-1047XL Quick Chuck Adapter, Extra Long ASCOT NO. MFG. NO. 173-00026 DESCRIPTION AS-1046D Dual Head Quick Chuck Adapter QUICK CHUCK ADAPTER, LONG QUICK CHANGE ADAPTER FOR 3/8" BURRS • Quick change long adapter 3/8” • One flat washer, one nut included • 1” (25mm) thread length • Quick release adapter for 3/8” shank • For use with 10mm carbide cutters and quick release couplers • Two allen screws to ensure tight fit • Allen wrench included 173-00025 173-00027 ASCOT NO. MFG. NO. 173-00025 AS-1047 DESCRIPTION Quick Chuck Adapter, Long ASCOT NO. MFG. NO. 173-00027 DESCRIPTION AS-1041-3/8 Quick Change Adapter For 3/8" Burrs

TIRE REPAIR MATERIALS TIRE REPAIR TOOLS & ACCESSORIES INSERTION TOOLS 440 ASCOT NO. MFG. NO. 537-90116 537-90144 537-91119 537-10010 537-10012 537-10017 537-10021 537-90135 537-90155 537-10011 537-10013 TST TTT APRBR SSTA SSTT SSPS SSPT AWRN35 AWRN55 SSNA SSNT DESCRIPTION HANDLE Metal T-Handle Automotive/ Light Truck Insertion Tool Metal T-Handle Truck Insertion Tool Metal T-Handle Spiral Probe for Automotive/Light Truck Metal T-Handle Insertion Tool for Auto/Light Truck: 6" Metal T-Handle Insertion Tool for Truck: 8" Metal T-Handle Probe Spiral for Auto/Light Truck: 6" Metal T-Handle Probe Spiral for Truck: 8" Replacement Needle: 3-1/2" Replacement Needle: 5-1/2" Replacement Needle for Auto/ Light Truck Insertion Tool: 5" Replacement Needle for Truck Insertion Tool: 6-3/4" Metal Metal Metal Metal Metal Metal Metal - - - - 537-90201 537-90035 537-90045 537-90119 PPG WRN35 WRN45 PRBR Plastic Pistol Grip Handle Barbed Rasp Replacement Needle: 3-1/2" Replacement Needle: 4-1/2" Replacement Spiral Probe Plastic - - - ASCOT NO. MFG. NO. 537-90006 537-90019 537-90200 537-90002 537-90003 537-90005 537-90009 537-90150 TST TSPRB TSBRP SEPG OETT OE11 SPPG P150 DESCRIPTION Chrome Plated T-Handle with 3" Replaceable Needle Chrome Plated T-Handle Spiral Probe Chrome Plated T-Handle with Barbed Rasp Plastic Pistol Grip Handle - Short Plastic T-Handle Heavy Duty Screwdriver-Type Handle: 11" Plastic Pistol Grip Handle Spiral Probe Heavy Duty Screwdriver-Type Handle Barbed Rasp HANDLE Chrome Chrome Chrome Plastic Plastic Plastic Plastic Plastic 537-90116 537-91119 537-90144 537-90005 537-10010 537-90150 537-90003 537-10017 537-90002 537-90201 537-10021 537-10011 537-90035 537-90045 537-90009

441 TIRE REPAIR MATERIALS TIRE REPAIR TOOLS & ACCESSORIES ASCOT CUTTING PLIERS CHANNELLOCK PLIERS • 100% MADE IN USA • LASER heat-treated cutting edges perform better and last longer • FORGED high c maximum strength and durability is specially c rust prevention • CHANNELLOCK BLUE® grips f • Laser treated cutting edges perform better and last longer • Precision-machined knife and anvil style cutting edges ensure perfect mating for superior performance and longevity • Forged high carbon steel for maximum strength and durability is specially coated for ultimate rust prevention • Comfort grips • MADE IN TAIWAN 319-01337 319-01447 319-01358 ASCOT NO. MFG. NO. 319-00337 319-00357 319-00358 319-00526 337 357 358 526 STITCHERS • Corrugated ball bearing stitcher with hardened steel wheel and varnished wooden handle 536-00001 DESCRIPTION 7" High Leverage Diagonal Cutting Plier 7" End Cutting Plier 8" End Cutting Plier 6" Slip Joint Plier, Wire Cutting Shear GOOSENECK STITCHER • Ideal repair tool for trucks, cars and motorcycles • Durable and ergonomic handle to reduce user fatigue ASCOT NO. MFG. NO. 319-01337 319-01447 319-01358 A337 A447 A358 DESCRIPTION 7" Diagonal Cutting Plier 7.75" Curved Diagonal Cutting Plier 8" Cutting Plier With End Cutter ASCOT NO. MF 536-00001 536-01121 536-01122 536-02040 536-02890 536-02910 536-06500 CS-1 VT-1121A VT-1121B 1-1/2" x 1/16" Corrugated Stitcher 1.5" x 1/16" Economy Ball-Bearing Stitcher 1.5" x 1/8" Economy Ball-Bearing Stitcher MRO2040 2" x 2" Flat Roller MRO2890 2" x 1/16" Corrugated Stitcher 2" x 1/4" Corrugated Stitcher MRO2910 MRO6500 2" x 2" Porcupine Roller ASCOT NO. MFG. NO. 536-00101 NS-TS01 DESCRIPTION 1.5" x 1/8" Gooseneck Stitcher 536-00101 319-00337 319-00358 319-00357 319-00526

TIRE REPAIR MATERIALS TIRE REPAIR TOOLS & ACCESSORIES TIRE PROBE AWL • Used to inspect injuries in tires and to remove small stones and debris 537-00001 ASCOT NO. MFG. NO. DESCRIPTION 537-00001 AWL-1 INNERLINER SCRAPER • This tool is a must for professional tire repairs • Eliminates power buffing on many tire repairs • Scraper removes material that might contaminate buffing wheels, ensuring a better repair every time REMOVES SMALL STONES & DEBRIS QUART CEMENT CAN W/ WOODEN HANDLED BRUSH • Can capacity: 1 qt • Air-tight design keeps cement clean and usable • Brush-in-cap design prevents evaporation and contamination Black Handle Awl 532-74601 532-07460 442 OR PRO AIRS ASCOT NO. MFG. NO 537-00004 S-4 532-74602 Black Handle Innerliner Scraper ASCOT NO. MFG. NO. 532-07460 532-74601 532-74602 7460 74601 74602 DESCRIPTION Quart Cement Can W/ Wooden Handled Brush Wooden Handled Brush For Quart Cement Can Aluminum Quart Cement Can BLACK HANDLED TIRE DENAILER • Recessed tip to allow nails or other puncturing objects to be pushed back through the tire • MADE IN THE USA tread depth gauge • 5-50 psi pencil gauge • Valve core tool • White crayon • Ink pen 736-10004 ASCOT NO. MFG. NO. DESCRIPTION 736-10004 TTP ASCOT NO. 537-00353 Tire Repair Tool Pouch MFG. NO. 353 BLADE LENGTH 7" RECESS DEPTH 1/8" POINT DIAMETER 5/16" OVERALL LENGTH 6-1/2"

443 TIRE REPAIR MATERIALS TIRE REPAIR TOOLS & ACCESSORIES MISC. INSERTION TOOLS, RASPS & NEEDLES ASCOT NO. MFG. NO. DESCRIPTION 537-00027 537-00028 537-00575 537-00585 537-02240 537-02241 537-10565 537-36560 537-95893 537-15224 537-15225 537-15226 537-15227 537-15230 537-15232 27 28 575 585 6003 6003T 565 190 199 14-925 14-204 14-213 14-216 14-317 14-204 Replacement Blades for Rubber Scraper Rubber Scraper Truck Repair Insertion Tool EM Repair Insertion Tool Radial Tire Repair Specialist Rasp - 1/4” Radial Tire Repair Specialist Rasp for Truck Tires Car Repair Insertion Tool Awl for Remastem & Minicombi Repairs Rasp for Remastem & Minicombi Repairs Super-Grip Open-Eye Needle Super-Grip Tire Probe Super-Grip Closed-Eye Needle Super-Grip Spilt-Eye Needle Heavy Duty Metal Split-Eye Needle Super-Grip Heavy Duty Tire Probe 537-00028 537-02241 537-00575 537-00027 537-00585 537-10565 537-95893 537-02240 537-36560 537-15224 537-15226 537-15227 537-15230 537-15232

TIRE REPAIR MATERIALS ® TIRE REPAIR TOOLS & ACCESSORIES ® Rubberhog® FLARED CONTOUR WHEELS The unique profile of the Flared Contour Wheels properly matches the shape of the tire. • Provides wide, level contact with surface • Efficient use of the entire tool • Easier to use - less operator fatigue • Reduced buffing time Tire Repair Tools Rubberhog features innovations from the leader in the industry. The Rubberhog Original SSG coating uses the best technology to ensure peace of mind. • Buffs cooler, no scorching • Fantastic wear life; costing you less per repair • Better surface texture for a safer bond • Faster material removal, for a quicker repair Uniform Height & Shape Open Tooth Structure Hundreds of Carbide Teeth 538-10700 444 538-11200 SMOOTH OPERATION 538-12200 REDUCED BUFFING TIME ASCOT NO. MFG. NO. 538-10000 538-10200 538-13017 538-13023 538-10700 538-10900 538-11100 538-11200 538-11400 538-11600 538-11800 538-12000 538-12200 RH100 RH102 RH107 RH109 RH111 RH112 RH114 RH116 RH118 RH120 RH122 DESCRIPTION 1-3/4" Dia., 3/8" Bore, Fine (SSG 170) 1-3/4" Dia., 3/8" Bore, Medium (SSG 230) RH130-170 2" Dia., 3/8" Bore, Fine (SSG 170) RH130-230 2" Dia., 3/8" Bore, Medium (SSG 230) 2-1/2" Dia., 3/8" Bore, Fine (SSG 170) 2-1/2" Dia., 3/8" Bore, Medium (SSG 230) 2-1/2" Dia., 3/8" Bore, Coarse (SSG 390) 3" Dia., 3/8" Bore, Fine (SSG 170) 3" Dia., 3/8" Bore, Medium (SSG 230) 3" Dia., 3/8" Bore, Coarse (SSG 390) 3-1/2" Dia., 3/8" Bore, SSG Fine (SSG 170) 3-1/2" Dia., 3/8" Bore, Medium (SSG 230) 3-1/2" Dia., 3/8" Bore, Coarse (SSG 390) Detailed Illustration of Rubberhog SSG® Teeth

445 TIRE REPAIR MATERIALS TIRE REPAIR TOOLS & ACCESSORIES POLYPLUGS FOR FLARED CONTOUR WHEELS • Compensates for mounting inaccuracies • Improves wheel life, and protects from damage • Reduces vibration for smoother, quieter, more comfortable operation • Reusable! ASCOT NO. MFG. NO. 538-15000 538-15100 538-15200 538-15400 538-15600 RH150 RH151 RH152 RH154 RH156 ECONOMY FLARED CONTOUR WHEEL • Proven Rubberhog shape • Uses the Standard Grit coating for an economical solution • Reduced aggressiveness for the less experienced user • Much safer than black stones! ASCOT NO. MFG. NO. 538-13000 RH130 DESCRIPTION 2" Contour Wheel, 3/8" Bore, 60 Grit BUZZOUT WHEELS • Free cutting and long lasting, with fully rounded profile • Fast removal on high tread repairs, or skiving bias tires • Excellent for shaping/texturing section repairs • Not recommended for contact with steel cord ASCOT NO. MFG. NO. 538-30000 538-30200 538-30400 538-30600 538-30500 538-31000 538-31200 538-31400 RH300 RH302 RH304 RH306 RH308 RH310 RH312 RH314 DESCRIPTION 2" x 1/4" W, Medium (SSG 230) 2" x 1/4" W, Coarse (SSG 390) 2" x 3/8" W, Medium (SSG 230) 2" x 3/8" W, Coarse (SSG 390) 2" x 1/2" W, Medium (SSG 230) 2" x 1/2" W, Coarse (SSG 390) 2" x 3/4" W, Medium (SSG 230) 2" x 3/4" W, Coarse (SSG 390) 538-30400 ASCOT NO. MFG. NO. 538-61900 538-00340 RH619 RS-34-E DESCRIPTION 1-3/8" Rotor Saw, 1/4" Shaft, Coarse (SSG 330) 3/4" Rotor Saw, 1/8" Shaft, Fine (SSG 170) NAIL HOLE REAMERS • For bias tires ASCOT NO. MFG. NO. 538-62600 RH626 1/4" x 3" NHR, 1/4" Shaft, Coarse (SSG 330) 538-62600 DESCRIPTION 1/8” SHAFT TOOL KIT • Combines four versatile shapes • For very small repairs and detailing LOW-PROFILE PATCH PREP WHEEL • Unique design allows buffing in low profile tires without risking sidewall damage • Solid steel construction makes this the smoothest running product available 538-14000 ASCOT NO. MFG. NO. 538-14000 140 DESCRIPTION 1-1/4" Dia., 3/8"-24 Thread, Fine (SSG 170) ASCOT NO. MFG. NO. 538-63500 RH635 DESCRIPTION 1/8" Shaft Tool Kit, Fine (SSG 170) 538-13000 DESCRIPTION 1-3/4" PolyPlug 2" PolyPlug 2-1/2" PolyPlug 3" PolyPlug 3-1/2" PolyPlug REUSABLE! 1/4” & 1/8” SHAFT TAPERS • Excellent for high-tread skiving 538-61100 ASCOT NO. MFG. NO. 538-61100 538-61300 538-00018 RH611 RH613 T-18-E DESCRIPTION 5/8" Taper, 1/4" Shaft, Coarse (SSG 330) 7/8" Taper, 1/4" Shaft, Coarse (SSG 330) 1/8" Taper, 1/8" Shaft, Fine (SSG 170) 1/4” & 1/8” SHAFT ROTOR SAWS • Excellent for high-tread skiving 538-61900 1/4" SHAFT SPHERES • Larger Spheres are excellent for high-tread skiving • Smaller Spheres chamfer around injuries on liner; don’t take a chance on entrapped air! ASCOT NO. MFG. NO. 538-60100 538-60300 538-60500 RH601 RH603 RH605 DESCRIPTION 5/8" Sphere, 1/4" Shaft, Coarse (SSG 330) 7/8" Sphere, 1/4" Shaft, Coarse (SSG 330) 1-1/8" Sphere, 1/4" Shaft, Coarse (SSG 330) 538-60100 ®

TIRE REPAIR MATERIALS ® RETREADING SIDEWALL WHEELS • Designed for shoulder and sidewall preparation • Used on manual or automatic sidewall buffers • Fast and effective removal of oxidized rubber • Used with or without traditional wire brushes • Excellent durability, reducing your cost per buff • Provides a uniform texture maximizing rubber-to-rubber bond ASCOT NO. MFG. NO. 538-12900 RH129 538-70750 538-70800 538-70850 RH707-50 RH708 RH708-50 DESCRIPTION 4" Buffing Cup, 3/4" Arbor Hole, Coarse (SSG 390) *Bandag pre-8400 series 6" x 50mm Donut Wheel, Very Coarse (SSG 460) 6" x 1" x 1-1/2" Donut Wheel, Coarse (SSG 390) 6" x 50mm Donut Wheel, Coarse (SSG 390) RETREADING SIDEWALL WHEELS • Designed for shoulder and sidewall preparation • Used on manual or automatic sidewall buffers • Fast and effective removal of oxidized rubber • Used with or without traditional wire brushes • Excellent durability, reducing your cost per buff • Provides a uniform texture maximizing rubber-to-rubber bond ASCOT NO. MFG. NO. 538-70800 RH705 DESCRIPTION 6" x 2-1/4" x 38mm Wide Donut Wheel Course (SSG 390) EXTREME FLARED CONTOUR WHEELS These wheels feature Rubberhog extreme MCM structured teeth to tackle tough jobs. This includes heavy buffing and texturizing for section repair and OTR work. • Fastest rubber-removal rate • Coolest cutting • Highest resistance to loading • Longest wear-life 538-10134 538-10013 ASCOT NO. MFG. NO. 538-42223 538-41270 538-51290 538-41212 538-01160 538-01163 1160XV ROTARY KNIFE BLADES • Cuts and textures ends of pre-cured tread • Fits popular tread builders • Long-Lasting! FOR PRE-CURED TREAD SD4120230 SD412X70 SD412X90 SD412X120 1160 TIRE REPAIR TOOLS & ACCESSORIES HIGH-PERFORMANCE SIDEWALL DISCS These angle-grinder discs offer a more efficient alternative when working on larger high-tread repairs and section repairs. The wide, semi-flat shape covers more area. 538-70800 • Fit popular pneumatic or electric angle grinders • More precise control, by using a two-handed grip • Easily smooth, texturize, or rapidly remove rubber • Cool operation, and long life 538-41212 Disc Wheel Profile DESCRIPTION 4-1/2" Fine (230) Gold 4-1/2" Medium (MCM 70) Teal 4-1/2" Course (MCM 90) Blue 4-1/2" Very Course (MCM 120) Black 7" Course (390) Silver 7" Very Course (MCM 120) Black 538-42223 446 538-11401 538-11601 538-10135 538-10020 538-12011 ASCOT NO. MFG. NO. 538-11401 538-11601 538-12011 538-11201 114X 116X 120X 122X DESCRIPTION 3" x 3/8" Bore, Medium (MCM 70) 3" x 3/8" Bore, Course (MCM 90) 3-1/2" x 3/8" Bore, Medium (MCM 70) 3-1/2" x 3/8" Bore, Course (MCM 90) ASCOT NO. MFG. NO. 538-10134 538-10135 538-10013 538-10014 538-10020 538-10021 538-20011 DESCRIPTION RH100-GEG-134 RH100-GEG-134-80 RH100-GEG-138 RH100-GEG-138-80 RH100-GEG-200 RH100-GEG-200-80 200-GEG 6" x 1-3/4", 150 Grit *Salisbury + Oliver 6" x 1-3/4", 80 Grit *Salisbury + Oliver 6" x 1-3/8", 150 Grit *Cahill 6" x 1-3/8", 80 Grit *Cahill 6" x 2", 150 Grit *Bandag 5110, All Matuzzi 6" x 2", 80 Grit *Bandag 5110, All Matuzzi 7" x 32mm, 150 Grit

447 TIRE REPAIR MATERIALS TIRE REPAIR TOOLS & ACCESSORIES CONTOUR WHEELS 2" + 2.5" B&J HORNET CARBIDES THE NEXT GENERATION OF CARBIDE TECHNOLOGY B&J Hornet Carbides feature longlasting cutting teeth arranged into a unique open pattern providing a uniform surface texture for a safer bond. B&J Hornet Carbides are available in many shapes, sizes and textures. GRIT CROSSREFERENCE R=RED O=ORANGE Y=YELLOW G=GREEN B=BLUE P=PURPLE GRIT SIZE 50 70 90 100 125 132 UNIT WHEELS 3" + 4" FINE UNIT WHEELS EUROPE 3" + 4" CONTOUR WHEELS 3" + 3.5" SUPER COARSE GRIT CHART KEY 50 100 70 90 SMALL + MEDIUM CONES 5/8" + 7/8" 125 132 ROUND BALLS 1" + 1.25" B&J HORNET CARBIDES APPLICATION GUIDE ROUND FACED BUFFOUT WHEELS 2" PENCIL RASP 0.25" x 2"

TIRE REPAIR MATERIALS TIRE REPAIR TOOLS & ACCESSORIES DUALIFE® KNOT TYPE WIRE WHEEL BRUSHES-STANDARD TWIST ASCOT NO. MFG. NO. DIA. 535-08014 08014 3" 535-08034 08034 4" 535-08044 08044 4" 535-08075 08075 6" 535-08085 08085 6" .014" POWER BRUSHES WIRE SIZE RPM ARBOR HOLE 25,000 1/2"-3/8" .0118" 20,000 1/2"-3/8" .014" 20,000 1/2"-3/8" .0118" 9,000 5/8"-1/2" 9,000 5/8"-1/2" .014" 535-13533 COPPER CENTER® ASCOT NO. 535-15322 535-15443 535-15463 535-15533 535-15543 535-15563 MFG. NO. DIA. WIRE WHEEL BRUSHES (WIRE FILL) WIRE SIZE RPM 15322 1-1/2" .0104" 20,000 ARBOR HOLE 3/8" 15443 2" .008" 20,000 1/2" 15463 2" .0118" 20,000 1/2"-3/8" 15533 3" .006" 20,000 1/2"-3/8" 15543 3" .008" 20,000 1/2"-3/8" 3" .0118" 20,000 1/2"-3/8" 15563 535-15443 535-21072 POLYFLEX® ENCAPSULATED WHEELS-BURGUNDY ELASTOMER (STANDARD) ASCOT NO. MFG. NO. 535-35070 35070 535-35240 35240 535-35250 DIA. 2" 2" WIRE SIZE RPM ARBOR HOLE .014" 20,000 1/2" .0104" 20,000 1/2" 35250 3" .0118" 20,000 1/2" 535-35240 ASCOT NO. MFG. NO. DESCRIPTION 535-21072 535-21073 535-21074 535-21076 21072 21073 21074 21076 1/4" Diameter, Wire Size: .004", OAL 3-1/2" 3/8" Dia, .004", OAL 3-1/2" 1/2" Diameter, Wire Size: .005", OAL 3-1/2" 3/4" Diameter, Wire Size: .006", OAL 3-1/2" PO TUBE BR ASCOT NO. MFG. NO. DESCRIPTION 535-13533 535-70179 13533 70179 Standard Twist Tire Wheel 3" Brush 535-08014 448 KNOTTED END AND POWER BRUSHES • Features a hollow end and heavy duty brushing action with some flexibility • Ideal for more demanding cleaning applications in recessed areas 535-14174 ASCOT NO. MFG. NO. 535-14174 535-14177 535-14178 535-14185 14174 14177 14178 14185 STYLE Single Row Knotted Wire Cup Brush Single Row Knotted Wire Cup Brush Knotted End Brush Knotted End Brush SIZE 3-1/2" 3-1/2" 1-1/8" 1-1/8" ARBOR 5/8"-11NC 3/8"-24UNF 1/4" Shank 1/4" Shank 535-14177 FILL WIRE Steel Steel Steel Steel 535-14178 WIRE DIA. TRIM LENGTH 7/8" 0.023" 0.023" 0.014" 0.020" 7/8" 1-1/8" 7/8" RPM 13,000 13,000 20,000 22,000 HEAVY DUTY

449 TIRE REPAIR MATERIALS TIRE REPAIR TOOLS & ACCESSORIES 3" - 10" POWER BRUSHES • Provide heavy duty brushing action with some flexibility • Ideal for demanding cleaning applications on somewhat irregular surfaces 535-14170 535-14171 535-14172 535-14165 535-14173 ASCOT NO. MFG. NO. 535-14165 535-14170 535-14171 535-14172 535-14173 535-14175 535-14176 535-14179 535-14182 14165 14170 14171 14172 14173 14175 14176 14179 17682 STYLE Twist Knot Mounted Knot Twist Knot Twist Knot Twist Knot Twist Knot Cable Twist Knot Cable Twist Knot Mounted Knot SIZE 3" 3-1/4" 4" 4" 4" 4" 4" 10" 3-1/4" 535-14175 WIDTH/FACE 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/4 1-3/4 3/8 ARBOR 1/2"-3/8" 1/4" Shank 1/2"-3/8" 1/2"-3/8" 535-14176 FILL WIRE Steel Steel Steel Steel WIRE DIA. 0.014" 0.014" 0.0118" 0.014" 535-14179 TRIM LENGTH 5/8" 5/8" 7/8" 7/8" RPM 25,000 25,000 25,000 25000 535-14182 JET VAC • Air pressure operated vacuum hose. Very efficient water and dirt removal from casings. Solid, high quality steel construction ASCOT NO. MFG. NO. DESCRIPTION 537-19012 819012 Jet Vac ASCOT AIR POWERED TIRE REPAIR VACUUM • Quick change from blow to vacuum function • KIT INCLUDES: Plastic body gun, dust bag, 2 extension tubes, shop brush, flat tube, tiny tube ASCOT NO. MFG. NO. DESCRIPTION 537-00003 VBG2 Ascot Air Powered Tire Repair Vacuum

TIRE REPAIR MATERIALS TIRE REPAIR TOOLS & ACCESSORIES CARBIDE CUTTING TOOLS BUFFING STONES FOR STEELBELTED TIRES 450 533-00010 533-00045 533-00003 533-00012 533-01120 533-01140 534-80001 534-80015 534-80036 534-80037 534-80115 534-80136 534-80137 533-01180 533-01381 533-01141 ASCOT NO. MFG. NO. 533-00003 533-00010 533-00012 533-00045 533-01120 533-01140 533-01141 533-01180 533-01181 533-01182 533-01381 533-01516 533-01716 533-01732 CB3 CB10 CB12 CB4.5 BU12B BU14R BU14TR BU18R BU18T BU18TL BU38T BU516NR BU716N BU732N 533-01181 DESCRIPTION 1/8" (3mm) Pointed End 3/8"(10mm) Pointed End 1/2" (12mm) Pointed End 1/8" (4.5mm) Pointed End 1/2" Ball Burr 1/4" Router Burr 1/4" Long Taper Burr 1/8" Router Burr 1/8" Taper Burr 1/8" Taper Burr, 3" Overall Length 3/8" Tree Burr 5/16" Long Taper Burr 7/16" Long Taper Burr 7/32" Long Taper Burr BUFFING WHEEL • For use on tires or tubes • Coarse grit, round nose • Tungsten carbide ASCOT NO. MFG. NO. DESCRIPTION 539-10001 BC-1 533-01516 533-01716 ASCOT NO. MFG. NO. 534-80001 534-80005 534-80011 534-80015 534-80024 534-80036 534-80037 534-80115 534-80136 534-80137 534-81115 A-1 A-5 A-1B A-15 A-24 A-36 A-37 A-15B A-36B A-37B A-15SS Large Cone 3/4" Stone Diameter (Brown) Pencil Point - 1/4" Stone Diameter Round Head Pencil - 1/4" Stone Diameter Stone Disc - 1-3/4" Diameter Stone Disc - 1-1/4" Stone Diameter Pencil Point - 1/4" Stone Diameter-Brown Stone Disc - 1-3/4" Diameter -Brown Stone Disc - 1-1/4" Diameter-Brown Pencil Point 1/4" Stone Diameter, Stainless Steel Shank DESCRIPTION Large Cone - 3/4" Stone Diameter Small Cone - 3/4" Stone Diameter Buffing Wheel, 2-1/2" diameter 539-10001

451 TIRE REPAIR MATERIALS WORK LIGHTS TIRE SERVICE LIGHT COMING FALL 2026! • Dual setting at 1000LM or 500LM • Light head supports 360 deg rotation • Rechargeable 3.7V battery; full charge in 3.5 hours • Lighting distance: 100 feet at 100%, 72 feet at 50% • Battery life: 3 hours at 100%, 5.5 hours at 50% • Power indicators: 100% - 75% - 50% - 25% • Clamp opening range is up to 2.16” • Two magnets on back of clamp • Ports: Input is Type-C, Output is USB 2.0 • Unit weight: 1lb. ASCOT NO. MFG. NO. 312-01000 DESCRIPTION AWCL-10000 Tire Service Light 312-01000 XLIGHT TIRE SERVICE LED WORK LIGHT • Designed for hands-free lighting during tire service and other work applications • 14" adjustable spring-tube for optimum light positioning within tight spaces • 2-stage compact high-power LED light provides 125 & 250 lumen output • Multiple high-power magnets on the handle and light-head attract easily to most metal surfaces • Lithium-ion rechargeable battery • Compatible with all passenger, light truck and commercial truck tires • Compatible with all tire spreaders ASCOT NO. MFG. NO. 312-14923 14-923 DESCRIPTION XLight Tire Service LED Work Light 312-14923 LED WORK LAMP ASSEMBLY • LED worklamp for tire spreaders • Directional spotlight for increased visability • 8W COB LED will provide 650 Lumens, 750 Lux at 1M • Stays cool to the touch • Heavy duty LED lens • Swivel head • Stays cool to the touch • Adjustable, flexible gooseneck • Includes mounting bracket ASCOT NO. MFG. NO. 312-08473 TR8473 DESCRIPTION LED Work Lamp Assembly ASCOT FLEXIBLE MULTIFUNCTION COB/ LED RECHARGEABLE WORK LIGHT • LED rechargeable work light with COB 1,500 lumen and 300 lumen gooseneck • Work light offers excellent brightness and comes with 5 light modes • Powered by a 4400mAh rechargeable battery for convenient and rapid charging • Applicable to various scenarios such as: reading, equipment inspection, car repair, emergency, etc • Aluminum alloy construction • Charging time: 3 hours • Features 2 strong magnets on the back side and a ring magnet on the top side • Power bank function • Made in China ASCOT NO. 312-00380 MFG. NO. AS-R380 DESCRIPTION Flexible Multifunction LED Rechargeable Work Light Video 312-00380 Designed for hands-free lighting during tire service and other applications

TIRE REPAIR MATERIALS TIRE SPREADERS & REPAIR STATIONS HEAVY DUTY TUBELESS TRUCK TUBE/TIRE DUNKERS • Space saving design requires 40% less space • New design fits in left or right corners • Entire rim and tire are checked for air leaks simultaneously • ONE MAN OPERATION: Safe and easy to operate, no lifting • 360˚ TURN IN WATER: Easy and fast inspection • Uni-quick ratchet type adapter adjusts from 15" dia. to 52" dia.and instantly lifts up to 400 lb. RVs to super singles • Optional inner tube adapter allows you to check tubes up to 50" in diameter ALL PURPOSE “EF” FULL CIRCLE TIRE SPREADER 517-00039 SPACE SAVING DESIGN ONE-MAN OPERATION 517-00055 ASCOT NO. MFG. NO. 517-00100 100TTD 517-00039 517-00055 39ED 55T DESCRIPTION E-Z Dunk Truck Tire Dunker, Range 15" - 50" Diameter 39" Dia. x 24" Depth Passenger & RV Tube & Tire Dunker with Polyethylene Tank T & G 55" Dia. x 24" Depth Truck & Grader Tube Dunker with Polyethylene Tank DUNK TANKS • Heavy duty plastic tire and tube test tank • Features pyramid type ribs for extra support to prevent bowing • Handles passenger tire sizes to wide oval and light duty truck tires 322-19822 EZ-110D TRUCK TIRE DUNKER W/LIFT • One man operation • Pick and out of water • Adapter f hole wheels • 55" x 24" Poly tub • Optional Inner tube/ tire spider available • Submerges entire tire under water • Can rotate under water for easy marking 322-02444 • Expose tire defects immediately! • Bead Diameter minimum 13.5", maximum 25.5" • Cross Sections minimum 5", maximum 21.5" • Revolve the tire 360° for inspection, repair and buffing or installing tubes, flaps and air bags inside curing rims • Maximum operating pressure of 150 PSI • Airoperated lift raises ASCOT NO. MFG. NO. 602-60210 EF 452 602-60210 DESCRIPTION All Purpose Full Circle Tire Spreader ASCOT NO. MFG. NO. 517-11033 EZ-110D DESCRIPTION EZ-110D Truck Tire Dunker w/Lift ASCOT NO. MFG. NO. 322-19822 322-02444 2400-10 2400-44 DESCRIPTION Passenger Car SUV/Light Truck

453 TIRE REPAIR MATERIALS TIRE SPREADERS & REPAIR STATIONS HEAVY DUTY “EF/HD” FULL CIRCLE TIRE SPREADER • Designed to lift and spread truck, bus, tractor and some aircraft tires 14" thru 24", 20-ply, including steel radial tires • Revolves 360°, while spread, for easy excellent inspection • Conveniently located floor-mount controls • Diameter arms easily slide into position to hold inner beads before spreading 602-60211 INVERTING TIRE SPREADER/ REPAIR STATION • Spreads and inverts passenger, truck and bus tires with ease for inspection and repair • Foot control valve conveniently located at base of machine • Adjustable lamp swings in and out of tire 604-05 ASCOT NO. MFG. NO. 602-60211 EF-HD DESCRIPTION Heavy Duty Full Circle Tire Spreader ASCOT NO. MFG. NO. 604-05120 5120 DESCRIPTION Inverting Tire Spreader/Repair Station PASSENGER/ LIGHT TRUCK TIRE SPREADER • Handles passenger and light truck tires up to 20" • Controlled tension release to avoid snap-back on tough sidewalls • Easily rotate the tire to locate the repair point • Quick and easy spread of tire and reduced footprint PASSENGER, LIGHT TRUCK AND COMMERCIAL TRUCK TIRE SPREADER • Handles everything from passenger to super-single truck tires • Adjustable height and a tire ramp • Lifts 35" off the ground • Manual rotation with a tool tray that swivels left and right • Controls for the lift are on both sides of the unit 604-05 604-05045 ASCOT NO. MFG. NO. 604-05045 5045 DESCRIPTION Passenger/Ligh Tire Spreader ASCOT NO. MFG. NO. 604-05500 5500 DESCRIP Passenger, Light Truck and Commercial Tire Spreader

TIRE REPAIR MATERIALS TIRE SPREADERS & REPAIR STATIONS AIR OPERATED TIRE SPREADER • For passenger/RV/light truck tires • Wide platform gives stable work AUTOMATIC TRUCK TIRE SPREADER • Air lift allows operator to lift without lifting the tire/wheel • Heavy gauge steel construction • Work light included • Air regulator/lubricator included FLOOR MOUNT ADJUSTABLE TIRE SPREADER • Provides easy access for repairing passenger and light truck tires • The adjustable tire spreader can accommodate all tires from garden service through light truck • The Tire Spreader has a foot-control swivel, tilts, and is equipped with a tool tray and a floor stand base-plate 454 ASCOT NO. MFG. NO. 603-00275 BJ-S275 DESCRIPTION Air Operated Tire Spreader ASCOT NO. MFG. NO. 603-40200 603-42400 603-43700 603-44000 603-44300 603-44700 603-52000 603-52800 603-52900 603-53100 603-53400 603-53500 402 424 437 440 443 447 520 528 529 531 534 535 DESCRIPTION AIR OPERATED TIRE SPREADER PARTS & ACCESSORIES Cylinder Step Valve Working Light Transformer Power Line Oil-Water Separator Metal Speediness Tie-In Y-Windtight Ring O-Windtight Ring Dustproof Ring Safety Valve Silencer ASCOT NO. MFG. NO. 603-82501 603-82502 603-82503 603-82504 603-82505 603-82506 603-82507 603-82508 603-82509 603-82510 603-82511 658 650 711 712 715 720 728 730 733 736 737 DESCRIPTION AUTOMATIC TRUCK TIRE SPREADER PARTS & ACCESSORIES Handle Valve Air Regulator O-Ring Washer Dustproof Seal Right Angle Connector Middle Union Middle Union Straight Union Rubber O-Ring Oil-Free Piston ASCOT NO. MFG. NO. 604-10300 604-10900 604-11000 604-11900 604-12700 103 109 110 119 127 DESCRIPTION FLOOR MOUNT ADJUSTABLE TIRE SPREADER PARTS & ACCESSORIES Spread Hook Set Roller Sets Spread Hook Set Foot Board Rubber Cover ASCOT NO. MFG. NO. 604-01275 BJ-275B DESCRIPTION Floor Mount Adjustable Tire Spreader ASCOT NO. MFG. NO. 603-00825 BJ-S825 DESCRIPTION Automatic Truck Tire Spreader 604-01275

455 TIRE REPAIR MATERIALS TIRE SPREADERS & REPAIR STATIONS ADJUSTABLE CENTER-POST TIRE SPREADER • Easy to use • Durable • Adjustable from 0" to 10" MANUAL TIRE SPREADER • Lightweight and easy to use • Special locking pin for safety • Made from durable materials • Locks both beads open for easy tire inspection and repair 605-08028 ASCOT NO. 605-08028 DESCRIPTION Adjustable Center-Post Tire Spreader TIRE SPREADER ASCOT NO. MFG. NO. 605-14191 MS-1 DESCRIPTION Manual Tire Spreader MANUAL TIRE SPREADERS • For large truck tires • Used in pairs • Spreads tires up to 17" span • Spreading power of a car jack • Heavy duty ctruction Weight: 4-1/4 Lbs. 605-31554 605-00101 ASCOT NO. MFG. NO. 605-00101 GTS-01 DESCRIPTION Tire Spreader Now 1750LB CAPACITY HEAVY DUTY WORK BENCH • 1750 lb. capacity • Heavy duty steel construction • Equipped with easy-to-use leveling feet • Bolts together for quick assembly • Sliding storage drawer • Blue powder coated finish • Dimensions: 63" x 27" x 34", 124 Lbs * Available in Red or Blue ASCOT NO. MFG. NO. 721-63001 721-63001-R DESCRIPTION TWB63001 TWB63001 1750 Lb. Capacity Heavy Duty Work Bench w/ Leveling Feet - BLUE 1750 Lb. Capacity Heavy Duty Work Bench w/ Leveling Feet - RED Available in Red! ASCOT NO. MFG. NO. 605-31554 T54 DESCRIPTION Manual Tire Spreader

TIRE REPAIR MATERIALS CABINETS & STORAGE ALL UNITS SOLD SEPARATE BUT ARE MADE TO WORK TOGETHER 456 18-DRAWER METAL STORAGE CABINET • Cabinet size: 33-3/4" (W) x 11-3/4" (D) x 10-3/4" (H) • DRAWER SIZE: 4-7/8" (W) x 11-1/4" (D) x 2-3/4" (H) • Modular drawer design for efficiency and organization • Heavy-duty, welded steel construction provides strength and stability • Drawers feature stoppers to prevent accidental pulling or spilling • Full-width handles and easy glide runners • Shipped fully assembled and ready to use • Weight: 45 lbs. • Lug Nut Labels Included! ASCOT NO. MFG. NO. 719-00018 18D DESCRIPTION 18-Drawer Metal Storage Cabinet 719-00018 32-BIN METAL STORAGE CABINET • Cabinet size: 33-3/4" (W) x 8-1/2" (D) x 19-1/4" (H) • DRAWER SIZE: 4" (W) x 8-3/8" (D) x 4-1/2" (H) • Keeps your tools and accessories organized and accessible • Heavy-duty, welded steel construction provides strength and stability • Hemmed bin fronts for retaining parts • Mounting holes located in the top and bottom • Shipped fully assembled and ready to use • Weight: 37 lbs. ASCOT NO. MFG. NO. 719-00032 32B DESCRIPTION 32-Bin Metal Storage Cabinet 719-00032 *Actual product appearance may vary

457 TIRE REPAIR MATERIALS CABINETS & STORAGE ASCOT STORAGE BOXES • Storage box is made from prime, cold rolled steel • Rust and acid-resistant baked enamel finish • Storage bins have scoop bottom compartments for easy removal of small parts • Metal clasp holds lid down to provide transportability • 16 empty bins • Fits inside Ascot sliding drawer cabinets (719-10016 & 719-10116) • Made in China • 719-00016: Each individual bin compartment is 4”L x 3”W x 3”H • 719-00116, add – each individual bin compartment is 3”L x 2”W x 2”H 719-00016 Ascot No. Mfg. No. Description 719-00016 16B-DPSC Ascot Expanded 16-Bin Storage Box 719-00116 16B-FBSC Ascot Standard 16-Bin Storage Box 719-00116 BASE STANDS FOR SLIDING DRAWER CABINETS • All steel construction, preassembled • 4pcs sliding drawers with ball bearing slides each drawer max loading capacity: 20KG hold compatible with small compartment boxes • Lockable with padlock(pad lock not included) • Powder coating finish stroage cabinet • 1pc per carton box BASE STANDS FOR SLIDING DRAWER CABINETS • KD construction with flat packaging • 4pcs 16ga. steel legs • 1pc 18ga. steel platform • Powder coating finish • 1pc per carton box • 719-21315 DIMENSIONS W21-1/4×D13-3/8×H15 inch • 71933135 DIMENSIONS W33-7/8×D13-3/8×H5-5/16 inch 719-21315 719-10016 719-33135 Ascot No. Mfg. No. 719-10016 719-10116 Description SCF211304 4-Drawer Cabinet Frame For 16 Bin Exp. Storage Box 4-Drawer Cabinet Frame For 16-Bin Strd. Storage Box SCF161104 Ascot No. Mfg. No. 719-21315 719-33135 Description SCB211315 Tall Base Stand For Sliding Drawer Cabinets SCB331305 Short Base Stand For Sliding Drawer Cabinets

TIRE REPAIR MATERIALS CABINETS & STORAGE SMART LOCK STORAGE CABINET • All steel 16 gauge construction fully assembled • Black powder coat finish • 78”H x 48” W x 24” D, with clear view doors • 48 blue bins included: • 24 pc: 5”H x 5-1/2”W x 11”D • 18 pc: 7”H x 8”W x 15”D • 6 pc: 7”H x 16-1/2W x 15”D • CompX eLock preinstalled • Non-network keyless smart lock system • Provides a comprehensive audit trail of the last 1500 access attempts • Stores up to 250 unique PIN codes. 458 Ascot No. 719-82478 Mfg. No. H-9015 Description Smart Lock Storage Cabinet REPLACEMENT BINS FOR SMART LOCK CABINETS 719-82478 719-12415 719-12419 HEAVY DUTY TIRE REPAIR CABINET 719-12420 719-12157 ASCOT NO. MFG. NO. 719-12415 PB015 719-12419 719-12420 719-12157 PB008 PB010 BD715 DESCRIPTION Small Replacement Bin for Ascot Smart Cabinets - 11" x 5-1/2" x 5" Medium Replacement Bin for Ascot Smart Cabinets - 15" x 8" X 7" Large Replacement Bin for Ascot Smart Cabinets - 15" x 16-1/2" x 7" Dividers for Ascot Smart Cabinet Bins - 6 Pack ASCOT NO. MFG. NO. 719-12001 DESCRIPTION TBG-WC12001z Heavy Duty Tire Repair Cabinet • Features sliding storage drawers with rollers • Size: 19.6" x 10" x 26" • 2 shelves inside (3 storage levels) • 2 tool hook sets on two inside doors • 2 sliding storage drawers with rollers • Switch-to-open handle • Optional shelf available • Weight: 36 lbs. 719-12001

easy Snap-Tech Design 459 TIRE REPAIR MATERIALS Commercial Stud & Hub Cleaner WPXL-T22 WP-T12 • Completely new ergonomic tool and brush design • Easily switch from stud cleaning to hub/wheel cleaning in a matter of seconds • Two tool bodies available to cover both the automotive and commercial markets • Full aluminum anodized body From automotive to heavy-duty commercial applications, Counteract Wheel Maintenance Kits provide the essential tools for proper wheel-end cleaning and maintenance—helping improve wheel fitment, extend component life, and keep vehicles operating safely. STK-12AD STK-1222 Automotive Wheel Maintenance Kit Automotive/Commercial Wheel Maintenance Kit STK-22AD Commercial Wheel Maintenance Kit FEATURES FEATURES • Stud & Hub Brushes • Automotive Socket Pro Set • Wheel Pro Tool • Wire Brushes • Low Speed Air Driver • Stud & Hub Brushes • Wheel Pro Tool (Automotive) • Wheel Pro XL Tool (Commercial) • Low Speed Air Driver FEATURES • Stud & Hub Brushes • 1” 33mm Six-Way Socket • Wheel Pro XL Tool • Wire Brushes / Nut Track • Flange Oil • Low Speed Air Driver Scan the QR code to see the beads in action. Download our app for quick Counteract calculations for any vehicle. Plus, access the Wheel Advantage Dealer Rewards Program, rewarding dealers with redeemable points for Counteract merchandise. Balancing App counteractbalancing.com • #1 internal balancer • Easy throw in bag • Increase fuel economy • Longer lasting tire life • No damage to inner liner • Save time in the shop • Can be injected through valve stem Scan to download our app!

RETREADING RETREADING Rasp Blades & Spacers Retread Accessories Retread Consumables Tire Appearance Envelopes

461 RETREADING RASP BLADES & SPACERS PINCOTT® STANDARD SERIES BUFFING RASP BLADE SPACERS Progressive development of blades capable of higher rates of rubber removal and the use of more powerful and higher speed machines imposed increasingly severe temperature conditions on rasp blades, giving rise to the need for effective cooling to avoid loss of temper in the blade material. ASCOT NO. MFG. NO. 613-00414 613-00418 613-00438 613-04316 613-04516 613-04532 613-00514 613-00518 613-00538 613-53165 613-00614 613-00618 613-00638 613-06316 613-06516 613-06532 DESCRIPTION R4S14DL R4S18SL R4S38DL R4S316SL R4S516DL R4S532SL R5S14DL R5S18SL R5S38DL R5S316SL R6S14DL R6S18SL R6S38DL R6S316SL R6S516DL R6S532SL Available for contoured hubs 1 2 3 Model/Make of Buffer Arbor Hole Size Keyway Size, if any 4 Pin Length 5 6 Rasp Blade Type Hub Type: Non-Spiral, Heavy-Duty, All Purpose or Regular 1/4" Double 1/8" Single 3/8" Double 3/16" Single 5/16" Double 5/32" Single 1/4" Double 1/8" Single 3/8" Double 3/16" Single 1/4" Double 1/8" Single 3/8" Double 3/16" Single 5/16" Double 5/32" Single R4 SERIES Allows cross ventilation and cleaning of cut rubber through the rasps head 28 Blades Per Set R115, 5 SEGMENTS SERIES 25 Blades Per Set P3, 6 SEGMENTS SERIES SINGLE SECTION 1/8", 5/32", 3/16" SPACERS FOR 9" 4-SEGMENT ASCOT NO. MFG. NO. 616-00320 616-00325 616-00416 616-00420 616-00425 616-11520 616-11525 PTP3-20 PTP3-25 PTR4-20 PTR4-25 SPACERS FOR 11.5" 5-SEGMENT PINCOTT® Pincott® DESCRIPTION Fits 11.5" 6-Segment Hubs Fits 11.5" 6-Segment Hubs PTR4 -16 Fits 9" 4-Segment Hubs Fits 9" 4-Segment Hubs Fits 9" 4-Segment Hubs PTR115-20 Fits 11.5" 5-Segment Hubs Fist 11.5" 5-Segment Hubs PTR115-25 RASP BLADES - ULTRA SERIES buffing rasp blades are designed to fit all U.S. and European buffing machines and are manufactured with multiple stampings to allow interchangeability between two or three pin hubs. SPACERS FOR 11.5" 6-SEGMENT • Exclusive heat treating process • Reduced tooth breakage • Faster material removal • Cooler Running • No blade warpage • Lower cost per buffed tire Unique tooth setting to enhance the strength of the teeth and produce cooler *Other sizes available for contoured hubs and use with smart blades 30 Blades Per Set PINCOTT® RASP BLADES - STANDARD SERIES • Exclusive heat treating process • Reduced tooth breakage • Cooler running • Faster material removal • No blade warpage • Lower cost per buffed tire Increased material between I.D. of blade and mounting pins to reduce the risk of blade breakage Pincott 408106 hub pictured in Bandag setup with 20 each R4S38DL and 4 each R4S316SL. ASCOT NO. MFG. NO. Ultra I Ultra II Ultra III 616-00111 616-00222 616-00333 DESCRIPTION Fits All 11.5", 5-Segmented Hubs Fits All 9", 4-Segmented Hubs Fits All 11.5", 6-Segmented Hubs HOW TO ORDER BUFFING HUBS

RETREADING RASP BLADES & SPACERS HUB FOR EAGLE II • Eagle II for use on most Bandag buffers 613-12900 ASCOT NO. MFG. NO. 613-12900 111031 DESCRIPTION Eagle II 9" Dia., 4" W., 1-1/2" Arbor TURBO HOLE APPLICATION • B & J Rasps can be ordered with Turbo cooling channels producing a significant increase in cooling effect and blade performance. These can be retrofitted to all existing B & J rasps. ASCOT NO. MFG. NO. 616-11400 111400 DESCRIPTION Turbo Hole Application EAGLE II BUFFING BLADES • Fast cutting and long lasting rasps for the best texture in all tire buffing operations • Tested under all conditions with outstanding results 534-80057 ASCOT NO. MFG. NO. 616-11275 121181 BUFFING BLADES • Proven to be the fastest cutting, longest lasting rasps with the best texture for all buffing operations • Can be used in existing Saturn II or R4 hub assemblies • Fast cutting, long life. Same texture from start to finish • QUANTITY: 30 sets per box ASCOT NO. MFG. NO. 616-43912 616-43914 616-43920 616-43921 616-11116 616-01420 616-11521 616-21525 616-43928 616-43940 616-11173 111136 111137 111140 111141 111116 111119 111107 111104 121177 111172 111173 DESCRIPTION TYPE Refill Refill Refill Refill Refill Refill Refill Refill Refill Refill Refill BLADES PER SET Apollo II Apollo III S115-25 S115-20 R-4-25 R-4-20 R-115-20 R-115-25 Patriot II Gemini II/SII Gemini II/R4 28 30 30 30 28 28 25 25 28 28 28 DESCRIPTION Eagle II Refill BLADES PER SET Eagle II refills 28 per set REPLACEMENT PINS FOR ROCKET HUBS • Special convex style hubs used on buffers must be returned to factory for pin replacement ASCOT NO. MFG. NO. 534-80057 19206 DESCRIPTION Hand Resharpening Stone 616-11400 HAND RESHARPENING STONE • Used to hone the inside and outside of curved surfaces • Wooden Handle ASCOT NO. MFG. NO. 616-01155 616-00944 616-01156 Smart I Smart II DESCRIPTION Fits all 11.5", 5-Segmented Hubs Fits all 9", 4-Segmented Hubs Smart III Fits all 11.5", 6-Segmented Hubs SIDE VIEW FRONT VIEW PINCOTT® RASP BLADES - SMART SERIES • Manufactured with a unique sinusodial (wave-like) form which introduces a multidirectional cutting action • Wave-like form creates greater strength in the blade and its teeth • Cutting action produces less drag on the rasp motor, saving you energy 462 ASCOT NO. 613-43934 613-43935 613-43936 613-43937 613-43938 613-43939 MFG. NO. 111207 111207 111207 111207 111207 111207 613-43940 111205 613-43941 613-43924 613-43943 111206 111208 111208 DIA. LENGTH 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 2-1/2" 3" 3-1/8" 3-1/4" 3-3/8" 3-1/2" 3-3/4" 4" 4-1/2" 5/16" 5" ASCOT NO. 613-43944 613-43945 613-43946 613-43831 613-43813 613-43812 613-43897 613-43814 613-43811 613-43815 MFG. NO. 111208 111208 111208 111208 111203 111203 111201 111202 111204 111204 DIA. LENGTH 5/16" 5-3/4" 5/16" 6" 5/16" 5/16" 1/4" 1/4" 6-1/2" 8" 3" 3-3/8" 1/4" 3-3/4" 1/4" 1/4" 1/4" 4" 6" 8"

463 RETREADING RASP BLADES & SPACERS REPLACEMENT PINS & SPACERS FOR ROCKET HUBS ASCOT NO. MFG. NO. DESCRIPTION R-115 STYLE 613-11205 613-11206 613-11207 613-11301 613-11302 613-11303 616-11304 616-11305 613-11328 613-11329 613-11330 613-11205 613-11206 613-11207 613-11205 613-11206 613-11207 613-11341 613-11342 613-11343 616-11346 616-11347 111205 111206 111207 111301 111302 111303 111304 111305 111328 111329 111330 111205 111206 111207 111205 111206 111207 111341 111342 111343 111346 111347 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long 5/16" Pins / 3-3/8" Long Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer R-115 Aircooled Spacer 3/8" R-115 Aircooled Spacer 1/4" SATURN II STYLE Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long 5/16" Pins / 3-3/8" Long SATURN III STYLE 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long 5/16" Pins / 3-3/8" Long Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer Saturn III Aircooled Spacer 3/8" Saturn III Aircooled Spacer 1/4" PINS FOR EAGLE II HUBS ASCOT NO. MFG. NO. 613-11206 111206 ASCOT NO. MFG. NO. DESCRIPTION EAGLE I STYLE 613-11380 613-11381 613-11382 613-11205 613-11206 613-11383 613-11384 613-11385 613-11205 613-11206 613-11201 613-11202 613-11310 613-11311 613-11312 616-11313 616-11314 111380 111381 111382 111205 111206 111383 111384 111385 111205 111206 111201 111202 111310 111311 111312 111313 111314 Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long EAGLE II STYLE Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long R4 STYLE 1/4" Pins / 3-3/4" Long 1/4" Pins / 4" Long Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer R4 Aircooled Spacer 3/8" R4 Aircooled Spacer 1/4"616-11206 To properly rebuild a Saturn II rasp hub order the following components: QTY. 8 20 4 MFG. NO. 111205 111328 111330 DESCRIPTION 5/16" x 3-3/4" Pins 3/8" I-Beam Spacers 3/16" I-Beam Spacers Note: For optimum performance replace spacers and pins as a set DESCRIPTION Eagle II Long Pins 5/16" SATURN II STYLE AIR COOLED SPACER ASCOT NO. MFG. NO. 616-11365 DESCRIPTION 111365 Saturn II Aircooled Aluminum Spacer 3/8" – 2 Pinholes for Saturn II US Domestic Rasp B & J OUTER SUPPORT SPACERS ASCOT NO. MFG. NO. DESCRIPTION 613-11391 111391 Saturn II Outer Support Spacers (Box of 8) REPLACEMENT SPACERS FOR EAGLE II HUBS ASCOT NO. MFG. NO. DESCRIPTION 613-11383 613-11384 613-11385 111383 111384 111385 Eagle II Spacer (Standard) Eagle II Spacer Eagle II Spacer REPLACING HUBS, PINS & SPACERS 616-11206 WIDTH 3/8" 1/4" 3/16" APPLICATION GUIDE

RETREADING RETREAD ACCESSORIES ROCKET RASP ROTARY GOUGES PINCOTT ROTARY GOUGES 616-11605 616-11612 ASCOT NO. MFG. NO. 616-11603 616-11604 616-11605 616-11606 616-11610 616-11612 616-16101 616-16102 616-16121 616-16122 810603 810604 810605 810606 810610 810612 810610-1 810610-2 810612-1 810612-2 DESCRIPTION 1-1/4" Dia. Mini No Notch 3/8" 24 THD (3/Set) 1-1/4" Dia. Mini No Notch 3/8" AH (3/Set) 2" Dia. Heavy Wall No Notch 1/2" AH 2" Dia. Heavy Wall No Notch 1/2" AH 2" Dia. Thin Wall No Notch 3/8" AH (2/Set) 2" Dia. Thin Wall Notched 3/8" AH (2/Set) 2" Dia. Thin Wall No Notch 1/2" AH (2/Set) 2" Dia. Thin Wall No Notch 3/8" 24 THD (2/Set) 2" Dia. Thin Wall Notched 1/2" AH (2/Set) 2" Dia. Thin Wall Notched 3/8" 24 THD (2/Set) B & J ROCKET SQUIGGLY RASP • Fast Rubber Removal • No scorching • Easy Control • Long life • No regritting costs 616-82013 ASCOT NO. MFG. NO. 616-82013 616-82014 820103 820104 DESCRIPTION 10 Blades w/ Support Plate (10 per Pack) 24 Blades w/ Support Plate (24 per Pack) PRECURE SHOP ACCESSORIES • Longer cutting wall gives longer life • Features: Deeper cutting surface for increased life • Longer flat wall for greater life with repeated sharpening • Sharper for easier rubber removal • Larger arbor hole flat, to accommodate inside nut, eliminating cracking at the base of the gouge ASCOT NO. MFG. NO. 613-91501 613-91504 613-91502 613-91503 613-91321 901501 901501N 901502 901503 901321 613-91322 613-91207 PINCOTT® 901322 901207 DESCRIPTION 2" Dia. Heavy Wall, 1/2" Arbor Hole (2 per Box) 2" Dia. Thin Wall Notched 1/2" AH (2 per Box) 2" Dia. Heavy Wall, 3/8"-24 Thread Arbor Hole (2 per Box) 2" Dia. Thin Wall, 3/8" Arbor Hole (2 per Box) 1-1/4" Dia. Heavy Wall, 3/8"-24 Thread Arbor Hole (3 per Box) 1-1/4" Dia. Thin Wall, 3/8" Arbor Hole (3 per Box) 3/4" Dia. Thin Wall, 3/8"-24 Thread Arbor Hole (4 per Box) MINI RASPS ASCOT NO. MFG. NO. 539-00005 539-00006 PTP5 PTP6 DESCRIPTION P5 Refill (6 per Box) P6 Refill (6 per Box) 464 MINI RASPS • These Mini Rasps are very efficient when larger amounts of rubber have to be removed quickly, for example in the event of very large repairs they can drastically reduce the required buffout time • Both Mini Rasp versions are available individually or as complete, ready-to-use kits with adapters for use on quick change chucks ASCOT NO. MFG. NO. 539-11075 111075 539-11134 539-11076 539-11133 111134 111076 111133 DESCRIPTION R-5 Rasp Complete (1 Set of R-5 Refills, 6 Alu Washer, NV 11 Adapter R-5) R-5 Refills (1 Set of 5 Pieces) R-6 Rasp Complete (1 Set of R-6 Refills, 7 Alu Washers, NV 11 Adapter R-6) R-6 Refills (1 Set of 6 Pieces) 639-42308 639-42312 ESBNK-4023-08 SBNK4023-12 539-11075 539-11076 ASCOT NO. ITEM NO. 639-11081 639-11139 11081F 11139F 639-50806 639-50184 ED-508C-06 ED-5018C-14 DESCRIPTION Duofast Air Stapler F1B-50-16 Bostitch Air Stapler 31, F1B-84-16 Duofast 1/4" Staples (5,000 per Box, 20 Boxes per Case) Duofast 9/16" Staples (5,000 per Box, 20 Boxes per Case) Bostitch 5/16" Staples (10,000 per Box, 20 Boxes per Case) Bostitch 1/2" Staples (10,000 per Box, 10 Boxes per Case)

465 RETREADING RETREAD ACCESSORIES NAILHOLE TESTER/SPREADER PRECURE TREAD STAPLES ASCOT NO. MFG. NO. 639-10800 639-02338 639-05010 639-08008 639-05012 11073F ESBNK402310 ED5010C08 EB8008 ED5012C10 DESCRIPTION Fasco Staple Gun F1B 80-16 Bostitch 3/8" Staples (10,000 per Box, 20 Boxes per Case) Duofast 5/16" Staples (5000 per Box, 20 Boxes per Case) 20ga Chisel Point 5/16" Staples - Fits Fasco, BeA (10,000 per Box, 24 Boxes per Case) Duofast 3/8" Staples (5000 per Box, 20 Boxes per Case) TEFLON HOSE ASSEMBLIES FOR PRECURE RETREADING SYSTEMS • Teflon hose assemblies in any length are available for all precure tire retreading equipmen including Bandag, Harrelson, Vulcan, etc. • Hoses are used inside the chamber for inflating the tire and evacuating the air from the envelope • Hoses are made of an innercore of extruded Teflon and covered with stainless steel braid reinforcement • All hoses have permanent swage-type brass end fittings 1/4"-18 male pipe (NPT) COUPLERS & PLUGS ASCOT NO. MFG. NO. 645-01000 645-00011 1000 11E 645-03000 W-3000HT 645-00321 645-21192 B3HD21Y B3K21192 CST17B PARTS & ACCESSORIES AVAILABLE (SOLD SEPARATELY) • Electric variable speed rotation • Quick change probe heads • Hand and foot operated bi-directional rotation • Auto-stop flaw detection • Visible spark at flaw location • Four air tool ports and two 110V outlets • Accurate flaw detection • Uses standard 110V power • Hand-operated spread and lift • Adjustable work height • Includes medium truck probe 606-57000 ASCOT NO. MFG. NO. 606-57000 606-57001 DESCRIPTION 1/4" Bandag-Type Coupler Plug Tire Valve Stem Steel Fits 5/16"-32 Ft. High Temperature Washer for 1000 Above HANSEN SPECIAL COUPLER FOR PRESS TYPE MATRIX Coupler (Brass) Plug (Brass) 645-00017 645-00117 645-02014 645-02110 645-01604 645-16171 645-08476 645-00874 645-00812 645-00814 CPST17B 2014EPR 2110EPR 1/4" BANDAG-TYPE COUPLERS/ADAPTERS Chamber Exhaust Coupler (Brass) Chamber Envelope Adapter (Brass) Thin Replacement O-ring Wide Replacement O-ring BH1-60Y4FP BH1-61-711 874-6 874 812 814 PARKER SPECIAL COUPLER MRT Coupler Vacuum Seal MRT Coupler Adapter BAIRD STYLE COUPLERS AND ADAPTERS Straight Thru With 90° Side Exhaust Coupler For Envelope Use 90° Hose Inlet Coupler For Tube .302 Valve Steam Adapter .482 Envelope Adapter 645-01604 645-08476 645-16171 645-00321 DESCRIPTION BTT-5700-S Nailhole Tester/Spreader - Steel BTT-5700-SF Nailhole Tester/Spreader - Steel/Fabric 645-00017 645-00117 645-01000 645-21192

RETREADING RETREAD ACCESSORIES 651-32437 PORTABLE SPRAYING EQUIPMENT • PORTABLE SPRAYER INCLUDES: Pump, 25' x 1/4" airless hose, gun swivel, silver spray gun and tip of choice • Recommended Graco tip #163-415 ASCOT NO. MFG. NO. 651-32437 651-35462 651-63415 232-437 235-462 163-415 DESCRIPTION 23:1 Cement Sprayer Silver Airless Spray Gun Only Silver Tip, .015" Orifice, 8-10" Fan Width WYCO FLEXIBLE SHAFT MACHINES • TYPICAL APPLICATIONS INCLUDE: Wood or metal finishing, rust or paint removal, auto body sanding, tire buffing, etc. • Many types of accessories are used with these machines, including edge-type grinding wheels, wire brushes, sanding discs, depressed center wheels, tire rasps, sanding drums TACK BANDS FOR SMOOTH, FINE TEXTURE RETREAD BRUSHES • Used for applying and stippling in cement ASCOT NO. MFG. NO. 653-40082 40082 DESCRIPTION 2" Diameter Stipple Brush 466 McGEE COMPANY 539-80002 ASCOT NO. MFG. NO. 539-80002 539-80003 539-80012 539-80013 H1238 H1138 OX2-R OX3-R 539-80003 DESCRIPTION OX2R 2-1/2” OD x 1” W OX3R 2-1/2” OD x 5/8” W 2-1/2" OD x 1" W 1-1/2" OD x 5/8" W 539-80012 539-80013 WHEEL ARBOR-ADAPTERS • For grinding wheels or wire brushes • 9/16"- 18 female thread to fit Wyco handpieces ASCOT NO. MFG. NO. ASCOT NO. 516-00492 516-00493 MFG. NO. 49-2 49-3 516-00494 49-4 516-00495 49-5 516-00496 49-6 516-04914 49-14 CORE CASING & HAND PC. NO. 10R 2R 2R 30R 30R 4R LENGTH (FEET) CORE NO. CASING 5 6 6 7 7 7 C-10 C-2 C-2 C-30 C-30 C-4 K-10 K-2 K-2 K-30 K-30 K-4 STRAIGHT HAND PC. 3500 3500 3500 551 551 551 516-00305 516-00405 516-00505 516-00605 305 405 505 605 WHEEL WIDTH MALE THREAD FOR GRINDING WHEELS AND OTHER ACCESSORIES 5/8" 1" 1-1/2" 1-1/2" ASCOT NO. MFG. NO. 516-01305 516-01405 305R 405R DESCRIPTION FOR ROTARY RASPS Threaded 3/8" (16 To Fit Rasps) Threaded 1/2" (13 To Fit Rasps) 3/8"–24 1/2"–20 1/2"–20 5/8"–18

467 RETREADING RETREAD ACCESSORIES Expandable Hub Assembly EXPANDABLE RIM ASSEMBLIES & REPLACEMENT BELTS EXP. RIM ASSEMBLIES ASCOT NO. 613-39020 613-00436 613-33379 613-28081 613-32769 613-00937 613-28313 613-00938 613-00465 613-32774 613-28271 613-00470 613-00674 EXP. RIM ASSEMBLIES MFG. NO. RIM 309020 12-14" 309962 309963 309942 309140 309150 309952 309202 309211 13-16" 13-16" 14-17" 14-17" 14-17" 14-17" BEAD WIDTH 5" 309030 13-16" 6-3/8" 7-1/2" 11-3/8" 6" 7-1/8" 9-1/4" 11-3/8" 309040 17-20" 6-1/2" 17-20" 8-1/4" 18-20" 7-5/8" 309220 17-20" 13-1/4" 309230 18-20" 16-3/8" REPL. BELTS ASCOT NO. 613-28260 613-00660 613-33382 613-28160 613-32773 613-02701 613-02821 613-02702 613-01653 613-32778 613-33717 613-01332 613-02092 EXPANDABLE HUB REPLACEMENT STEMS REPL. BELTS MFG. NO. 309510 309520 309521 309522 309541 309540 309550 309560 309570 309242 309354 309580 309356 EXP. RIM ASSEMBLIES ASCOT NO. 613-23800 613-00466 613-32822 613-33162 613-25718 613-33093 613-00846 613-00467 613-33564 613-00839 613-00699 613-00705 EXP. RIM ASSEMBLIES MFG. NO. RIM BEAD WIDTH 309602 20-22.5" 8-1/4" 309050 20-22.5" 9" 309183 20-22.5" 11-3/4" 309021 20-22.5" 14-1/2" 7-1/2" 8-1/4" 9" 22-24.5" 22-24.5" 22-24.5" 22-24.5" 22-24.5" 22-24.5" 13-3/8" 14-1/2" 18-1/2" 14" REPL. BELTS ASCOT NO. 309190 309282 309060 309070 309912 309913 309490 23-25" 13-3/8" 309890 27-29" ENVELOPE SEALING RINGS* • Heavy duty Acme Threads • Sliding shield on outer body • Ergonomic handle • Oil-impregnated bushings Locking Stems Shown 613-33092 613-01715 613-32826 613-33007 613-25839 613-33094 613-02533 613-01955 613-33568 613-02516 613-11955 613-02184 REPL. BELTS MFG. NO. 309622 309610 309612 309491 309600 309302 309630 309640 309641 309643 309500 309644 ASCOT NO. MFG. NO. 613-00512 613-09111 613-19111 613-29617 613-29618 900512 309111 30911L 729617 729618 DESCRIPTION Garter Spring 4 Lock 8 Plain Stem Set 12 All Lock Stem Set Steel-Inserted Plain Stem Steel-Inserted Plain Locking Stem POLY EASE RETREAD RELEASE LINER • American made perforated polypylene film is specified to soften at 311°F and melt at 328°F • For low temp bonding chambers • 75 Gauge • Custom widths are also available • High temp film available ASCOT NO. MFG. NO. 634-12027 634-14027 634-15027 634-18027 PP12HD PP14HD PP15HD PP18HD WIDTH LENGTH QTY./BOX WEIGHT/ROLL 26 lb. 30 lb. 32 lb. 33 lb. 12" 14" 15" 18" 2700' 2700' 2700' 2700' 2 2 2 1 538-12900 BANDAG SIDEWALL BUFFING CUP AND BRUSH ASCOT NO. MFG. NO. 538-12900 535-06020 535-03811 RH129 6020 3811 DESCRIPTION 4" Buffing Cup, 3/4" Arbor Hole, SSG 390 Wire Brush, .0118 Wire Size 2" to 3/4" Arbor Hole Adapter Plates ASCOT NO. MFG. NO. 644-12345 644 DESCRIPTION Envelope Sealer Rings “Available Sizes: 14", 15", 16", 16.5", 17", 17.5", 19.5", 20", 22", 22.5", 24" & 24.5"

RETREADING RETREAD MULTIPLE TEMPERATURE RUBBER (MTR) & BLACK CUSHION GUM REPAIR PRODUCTS • REMA TIP TOP offers a variety of uncur rubber MTR products with excellent green tack and outstanding flow & vulcanization characteristics • MTR Cushion Gum and R Rubber products are designed for Heat C Systems with lamination of REMA TIP TOP repair units and filling prepared injuries • MTR Rubber products perform best when used with REMA TIP TOP MTR Solution ASCOT NO. MFG NO. 526-51618 526-55672 5161180 5567L DESCRIPTION MTR Cut Resistant Rope Rubber, OTR Repairs, 26.5 lb. Pail MTR Rope Rubber, OTR Repairs, 26.5 lb. Pail REMA MTR CUSHION GUM • REMA TIP TOP offers a variety of uncured rubber MTR products with excellent green tack and outstanding flow & vulcanization characteristics • MTR Cushion Gum and Rope Rubber products are designed for Heat Cure Systems with lamination of REMA TIP TOP repair units and filling prepared injuries • MTR Rubber products perform best when used with REMA TIP TOP MTR Solution ASCOT NO. 634-00812 634-00815 634-00820 645-01812 645-01815 DESCRIPTION 8" x 12" Stretch Wicking Pad 8" x 15" Stretch Wicking Pad 8" x 20" Stretch Wicking Pad WKMICH8X12 Michelin Wicking Pad WKMICH8X15 Michelin Wicking Pad QTY./BOX 24 24 24 24 24 CONSUMABLES STRETCH WICKING PRODUCTS • For use with valve-type envelopes • All 4-ply 634-00812 634-00815 634-00820 468 McGEE COMPANY 634-05 WOVEN ROLL WICKING • For use with non-valve type processes • Full rolls only • Treated with a special release agent to prevent adhesion to the cushion gum ASCOT NO. MFG NO. 526-55600 526-55610 526-55630 18ER 5561 5563 STRIPPING STOCK • Stripping Stock curing temperatures 914, 074, 440 • Free flowing quality stock for stipping edges of tread rubber to cover excess buffed surfaces • APPLICATIONS: Used on sidewalls to improve appearance • 25 lb. box • Available at any gauge & width Please call for more details. DESCRIPTION Rema 10 LTC Extruder Rope Rubber MTR Cushion Gum, 24' x 10" x 0.050", 6 lbs - Rema MTR Cushion Gum, 2600mm x 30mm x 3mm, 2 lbs. - Rema ASCOT NO. DESCRIPTION 634-05586 Woven Roll Wicking - Green 634-05587 Woven Roll Wicking - Green RUBBER WICKING PADS • High elasticity compound eliminating tread deformations • Eliminates use of venting poly underneath • Excellent thermal resistance, reducing aging for extended use ASCOT NO. MFG. NO. 634-00115 634-00121 DL01-15 DL21 SIZE 55.50" x 6.75" 22" x 16" 634-00115 SIZE 1-1/2" x 180' 2" x 180' QTY./BOX 15 15 634-00121 1" Stripping Stock 2" Stripping Stock

469 RETREADING RETREAD CONSUMABLES JET RUBBER SOLVENT • Pure Aliphatic Hydrocarbon • Free from oils and impurities • APPLICATIONS: For diluting or thinning heavy viscosity cements and tire paint; For cleaning buffed retread and repair surfaces; For freshening cushion gum and other uncured rubber stocks ASCOT NO. MFG. NO. 633-50105 633-50154 DESCRIPTION CI31-5GAL CI31-54GAL 5-Gallon Container 54-Gallon Container JET BLACK VULCANIZING CEMENT BRUSH TYPE: An excellent repair cement • Contains special additives to bond to exposed cords such as nylon, rayon, fiberglass, polyester & polyaramid • Use within 15 minutes on exposed steel for best adhesion • Superior tack and excellent cured adhesion SPRAY TYPE: An all purpose cement for both hot capping and precure retreading • Also used for repairing • High tack cement • Excellent cured adhesion and provides superior bond and tack • Available in 32 oz. and 54 Gallon ASCOT NO. MFG. NO. 633-83005 633-83015 DESCRIPTION CH03-5GAL CH00-5GAL 5-Gallon Brush Cement 5-Gallon Spray Cement 633-83005 633-50105 SURE SHOT PRESSURE SPRAYERS MADE IN THE • Air pressurized and refillable • Environmentally safe, eliminates aerosol usage • For brake and parts cleaner, penetrating oils, lubricants, degreasers, solvents • MADE IN USA ASCOT NO. MFG. NO. 632-00005 632-00010 632-01002 632-10001 632-02400 K-5 K-10 A1002 A1000R M2400S DESCRIPTION Partial Repair Kit for Model A Sure Shot Sprayers Complete Repair Kit for Model A Sure Shot Sprayers Sure Shot Black Enameled Steel Sprayer w/ Adjustable Nozzle Sure Shot Enameled Steel Sprayer (Red) Anodized Aluminum Sprayer 632-02400 USA MOLD LUBRICANT (CONCENTRATED) • Release molded retreads with ease and keep molds clean at the same time • This non-flammable, odorless formula allows rubber to flow freely and prevents carbon buildup • Produces a superior satin finish with no staining • Economical concentrate may be diluted with up to 20 parts water to one part lubricant ASCOT NO. 647-24501 647-24505 DESCRIPTION Mold Lubricant (1-Gallon) Mold Lubricant (5-Gallon) 647-24501

RETREADING TIRE APPEARANCE ROBBINS ENVELOPE LUBE • Spray on inside of the envelope, spray on while envelope is hot to dry faster, spray after first cure and then every 30 cures or as needed • Quart container is a convenient spray bottle • Ready to use, no dilution required 647-05612 ASCOT NO. MFG. NO. 647-05611 647-05612 647-05613 5611 5612 5613 DESCRIPTION Robbins Envelope Lube (1-Quart) Robbins Envelope Lube (1-Gallon) Robbins Envelope Lube (5-Gallon) ASCOT NO. MFG. NO. 497-11800 497-11801 F1.7800 F1.1801 DESCRIPTION Murphy's Black Tire Paint 5-Gallon Pail Murphy's Black Tire Paint 55-Gallon Drum MURPHY'S BLACK TIRE PAINT 647-05611 • Ready to Use - No dilution needed • Easy to apply in tire paint machines or by brush • Quick drying • Matte black finish • Superior hiding ability over wax or chalk markings • Waterbase for easy cleanup 497-11800 470 ™ REMA SHINE NEW LOOK TIRE VENEER • Premium water-based coating with excellent hiding power specifically for retread tires • Revolutionary design applies a matte, rubber veneer finish to the tire's sidewall • Covers and hides all chalk marks • Dries quickly, will not wash off in rain • Ready to use 497-84405 ASCOT NO. MFG. NO. 497-84405 497-84406 NL640 NL55G DESCRIPTION IMI New Look Tire Veneer - 5-Gal Pail IMI New Look Tire Veneer - 55-Gal Drum EXPANDABLE HUB LUBE BLACK-OUT BLACK TIRE PAINT • Ready to use water based black tire paint • Restores the original appearance of retreaded and used tires • Covers crayon marks, scuffs and dirt to give the tire a new fresh look • Works with machine or hand application • Compatible with tire painting machines ASCOT NO. MFG. NO. 497-00005 497-00055 DESCRIPTION Blackout-5 Black-Out Black Tire Paint (5-Gallon) Blackout-55 Black-Out Black Tire Paint (55-Gallon) 497-00005 • Ready-To-Use formula • Quick/ easy application • Petroleum/ Silicone free • No mess or product build-up on equipment • 70+ tires per application • Water-based • Excellent for interior plastic and vinyl trim • Deep long-lasting shine • Convenient, ready-to-use formula • Pleasant odor and VOC compliant 395-10100 ASCOT NO. MFG. NO. 395-10100 101000110 DESCRIPTION REMA Shine 647-00032 ASCOT NO. MFG. NO. DESCRIPTION 647-00032 EHL-32 Expandable Hub Lube (32 Oz. Spray Bottle)

471 RETREADING ENVELOPES ENVELOPE APPLICATION Envelope Spreader Available. Call for Details. ACCU FIT II/INNERLOPE INSIDE ENVELOPES ASCOT NO. MFG. NO. 643-40001 643-40002 643-40003 643-40004 643-40005 643-40006 643-40007 643-40008 643-40009 643-40010 643-40011 643-40012 643-40013 643-40014 643-40015 643-40016 643-40017 643-40018 40x8-24.5 40x8-24.5 38x8-24.5 42x8-24.5 42x8-24.5 OUTSIDE TIRE SIZE 4422 4223 4224 4422 4422 44x10-24.5 4423 42x10-24.5 4422 42x10-22.5 4422 44x12-22.5 4522 40X8-22.5 4219 44x10-22.5 4522 42x10-22.5 4422 38x8-22.5 35x8-22.5 40x8-22.5 38x8-22.5 35x8-22.5 42x8-22.5 3822 4224 4224 3822 4422 4023 305/75R24.5 Deep Lug 305/75R24.5 285/75R24.5, 275/80R24.5 12R24.5 11R24.5 12.00R24 11.00R24 455/55R22.5 445/65R22.5 18R22.5 445/50R22.5, 315/80R22.5, 305/85R22.5 425/65R22.5 16R22.5 385/65R22.5 15R22.5 305/75R22.5, 305/70R22.5, 295/80R22.5, 295/75R22.5, 275/80R22.5 275/70R22.5, 265/75R22.5, 255/80R22.5, 255/70R22.5, 245/75R22.5, 235/80R22.5 12.75R22.5, 12R22.5, 10.00R22 11R22.5, 10R22.5 9R22.5 11.00R22 APPLICATION GUIDE ASCOT NO. MFG. NO. 643-40019 643-40020 643-40021 643-40022 643-40023 643-40024 643-40025 643-40026 643-40027 643-40028 643-40029 643-40030 643-40031 643-40032 643-40033 643-40034 643-40035 643-40036 643-40037 643-40038 42x10-20 42x8-20 44x12-20 40x8-20 42x10-20 38x8-20 35x8-20 35x8-19.5 32x8-19.5 29x7-19.5 29x7-19.5 29x7-17.5 35x8-17.5 32x8-17.5 31x6-17.5 29x7-16 27x5-16 OUTSIDE TIRE SIZE 4422 4423 4522 4224 4422 4023 3822 3521 3521 3218 3218 3117 3822 3521 3218 3218 2916 10.00-15 HB 3521 8.25-15 HB 7.50-15 HB 3218 3117 365/80R20 14/80R20 14.00R20 13/80R20, 11.00R20, 10.00R20 12.00R20 9.00R20 8.25R20 305/70R19.5 285/70R19.5, 265/70R19.5, 24570/R19.5 225/70R19.5 8R19.5 245/70R17.5, 215/75R17.5 11R17.5 10R17.5, 9.5R17.5, 9R17.5 7.50-17 245/75R16, 235/85R16, 215/85R16, 7.50R16 225/75R16 10.00R15 8.25R15 7.50R15 B & J ENVELOPE TESTER • Extremely Fast • Detects the smallest leaks • Positive operation • Easy to install • Simple to use • No maintenance required! • Organize and store envelopes conveniently • Mobile, can be moved around the shop wherever needed • Sturdy and easy to maneuver • Color-coded handle grips available to organize envelopes by size • Easy assembly • CART HEIGHT: 39.75" • BASE DIAMETER: 47.83" • LOAD CAPACITY: 1,000 lb. 649-83340 ASCOT NO. MFG. NO. 649-83340 833400 DESCRIPTION B & J Envelope Tester ASCOT NO. MFG. NO. 649-40100 840100 DESCRIPTION Envelope Storage Cart

RETREADING New Tire Branding Coming Soon! Scan For Full Parts List 1" Letters and Numbers TIRE BRANDING INSERTS 1/2" Letters and Numbers 1/4" Letters and Numbers ASCOT NO. MFG. NO. 452-00001 452-00011 DESCRIPTION 1" CHARACTERS - SETS TB1NOSET TB1LETSET 1" Set - Numbers 1" Set - Letters ASCOT NO. MFG. NO. 452-00012 452-00112 TB1/2LETSET DESCRIPTION 1/2" CHARACTERS - SETS TB1/2NOSET 1/2" Set - Numbers 1/2" Set - Letters ASCOT NO. MFG. NO. 452-00014 452-00114 TB1/4LETSET DESCRIPTION 1/4" CHARACTERS - SETS TB1/4NOSET 1/4" Set - Numbers 1/4" Set - Letters 472 TIRE REGROOVER Ergonomic handle design makes working with this tool easier and reduces hand-fatigue • An 8-position heat control modulates cutting intensity resulting in fast and accurate regrooving of Truck or Tractor tires • Not intended for Passenger vehicle tires • Blades are not included The Rubber Cut 414 in use. 455-00003 ASCOT NO. 455-00003 455-00129 RC414 N/A 455-00401 W-1 455-00402 455-00403 455-00404 455-00405 455-00406 455-00501 455-00502 455-00503 455-00504 455-00505 W-2 W-3 W-4 W-5 W-6 R-1 R-2 R-3 R-4 R-5 SERIAL NUMBER REMOVER TOOL 531-95001 Rubber Cut 414 Rema Regroover Set Screw for PS-15 Regroover Regroover Blades 20-Pack Regroover Blades 20-Pack Regroover Blades 20-Pack Regroover Blades 20-Pack Regroover Blades 20-Pack Regroover Blades 10-Pack Round Blade - Cutting width 3mm-4mm Round Blade 8mm Cut Depth Round Blade - Cutting Width 6mm-8mm Round Blade - Cutting Width 9mm-10mm Round Blade - Cutting Width 10mm-14mm ASCOT NO. MFG. NO. DESCRIPTION 531-95001 531-95002 TTHB-1 RRB-1 531-95002 Serial Number Remover Tool 12-Pack Replacement Blades

473 MEASUREMENT CONVERSIONS Millimeter, Decimal & Fractional Inch Sizes MM .10 .15 .20 .25 .30 .35 .39 .40 .45 .50 .55 .60 .65 .70 .75 .79 .80 .85 .90 .95 1.00 1.05 1.10 1.15 1.19 1.20 1.25 1.35 1.40 1.45 1.50 DECIMAL EQUIV. .0039 .0059 .0079 .0098 .0118 .0135 .0138 .0145 .0156 .0157 .0160 .0177 .0180 .0197 .0200 .0210 .0217 .0225 .0236 .0240 .0250 .0256 .0260 .0280 .0276 .0292 .0295 .0310 .0312 .0315 .0320 .0330 .0335 .0350 .0354 .0360 .0370 .0374 .0380 .0390 .0394 .0400 .0410 .0413 .0420 .0430 .0433 .0452 .0465 .0469 .0472 .0492 1.30 .0512 .0520 .0531 .0550 .0551 .0570 .0591 .0595 1.55 .0610 1.59 1.65 .0625 1.60 .0629 .0635 .0649 1/16" 3/64" 1/32" 2.60 2.70 2.75 2.78 1/64" FRACTION EQUIV. MM 1.70 1.75 1.80 1.85 1.90 1.95 1.98 2.00 2.10 2.15 DECIMAL EQUIV. .0670 .0689 .0700 .0709 .0728 .0730 .0748 .0760 .0767 .0781 .0785 .0787 2.05 .0807 .0810 .0820 .0827 .0846 .0860 2.20 .0866 2.25 2.38 2.45 .0925 .0935 .0937 .0885 .0890 2.30 .0905 2.35 3/32" 2.40 .0945 .0960 .0964 .0980 2.50 .0984 .0995 .1015 .1024 .1040 .1063 .1065 .1082 .1094 .1100 2.80 .1102 .1110 .1130 2.90 3.0 3.10 3.18 3.30 3.40 3.50 3.57 3.60 3.70 3.75 .1141 .1160 .1181 .1200 .1220 .1250 3.20 .1260 3.25 .1279 .1285 .1299 .1338 .1360 .1378 .1405 .1406 .1417 .1440 .1457 .1470 .1476 .1495 3.80 .1496 .1520 9/64" 1/8" 7/64" 5.25 5.30 5.40 5.50 5.56 5.60 5.70 5.75 5.80 5.90 5.95 6.10 4.10 4.20 5/64" 4.25 4.30 4.37 4.40 4.50 4.50 4.60 4.70 4.75 4.76 4.80 4.90 5.00 5.10 5.16 5.20 FRACTION EQUIV. MM DECIMAL EQUIV. 3.90 .1540 3.97 .1562 .1570 4.00 .1575 .1590 .1610 .1614 .1654 .1660 .1673 .1693 .1695 .1719 .1730 .1732 .1770 .1771 .1800 .1771 .1800 .1811 .1820 .1850 .1870 .1875 .1890 .1910 .1929 .1935 .1960 .1968 .1990 .2008 .2010 .2031 .2040 .2047 .2055 .2067 .2086 .2126 .2126 .2130 .2165 .2187 .2205 .2210 .2244 .2263 .2280 .2283 .2323 .2340 .2344 6.00 .2362 .2380 .2401 .2420 6.20 .2441 6.25 .2460 6.30 .2480 6.35 6.40 .2520 6.50 .2559 .2570 .2500 1/4" 15/64" 13/64" 11/64" FRACTION EQUIV. 5/32" MM DECIMAL EQUIV. 6.60 .2610 6.70 6.75 6.75 .2638 .2656 .2657 .2660 6.80 .2677 6.90 .2716 .2720 7.00 7.10 7.14 7.20 7.25 7.30 7.40 7.50 7.54 7.60 3/16" 7.70 7.75 7.80 7.90 7.94 8.00 8.10 8.20 8.25 8.30 8.33 8.40 8.50 8.60 7/32" 8.70 8.73 8.75 8.80 8.90 9.00 9.40 9.50 9.53 9.60 9.70 9.75 9.80 9.90 9.92 10.32 .2756 .2770 .2795 .2811 .2812 .2835 .2854 .2874 .2900 .2913 .2950 .2953 .2968 .2992 .3020 .3031 .3051 .3071 .3110 .3125 .3150 .3160 .3189 .3228 .3230 .3248 .3268 .3261 .3307 .3320 .3346 .3386 .3390 .3425 .3437 .3445 .3465 .3480 .3504 .3543 .3580 .3701 .3740 .3750 .3770 .3780 .3819 .3838 .3858 .3898 .3906 10.00 .3937 .3970 .4040 .4062 .4130 .4134 10.50 11/32" 19/64" 9/32" FRACTION EQUIV. 17/64" MM 11.00 11.11 11.50 11.51 11.91 DECIMAL EQUIV. .4330 .4375 .4528 .4531 .4687 12.00 .4724 12.30 12.50 12.70 13.00 .5118 13.10 13.49 13.50 13.89 .4843 .4921 .5000 .5156 .5312 .5315 .5469 14.00 .5512 14.29 14.50 14.68 .5625 .5709 .5781 15.00 .5906 15.08 15.48 15.50 15.88 5/16" 16.00 .6299 16.27 16.50 16.67 17.00 17.06 17.46 17.50 17.86 21/64" 18.00 .7087 18.26 18.50 18.65 .7187 .7283 .7344 19.00 .7480 19.05 19.45 19.50 19.84 20.00 .7874 20.24 .7500 .7656 .7677 .7812 .7969 21.00 .8268 21.03 21.43 21.50 21.83 3/8" 15/64" 22.00 .8661 22.23 22.50 22.62 .8281 .8437 .8465 .8594 .8750 .8858 .8906 23.00 .9055 23.02 23.42 23.50 23.81 25/64" 13/32" .9062 .9219 .9252 .9375 24.00 .9449 24.21 24.50 24.61 25.00 .9843 25.03 25.40 .9531 .9646 .9687 .9844 1.000 .5937 .6094 .6102 .6250 .6406 .6496 .6562 .6693 .6719 .6875 .6890 .7031 FRACTION EQUIV. 7/16" 29/64" 15/32" 31/64" 1/2" 33/64" 17/32" 35/64" 9/16" 37/64" 19/32" 39/64" 5/8" 41/64" 21/32" 43/64" 11/16" 45/64" 23/32" 47/64" 3/4" 49/64" 25/32" 51/64" 53/64" 27/32" 55/64" 7/8" 57/64" 29/32" 59/64" 15/16" 61/84" 31/32" 63/64" 1" INCH X 25.40 = MM MM X 0.03937 = INCHES

ALPHABETICAL INDEX // A // A/C Recycling Machines .............................392,393 ADAS/Alignment Systems .................................365 Air & Liquid Valves ......................................257,260 Air Chucks - Ball Foot ........................................278 Air Chucks - Dual Foot ................................278,279 Air Chucks - Dual Head......................................279 Air Chucks - European Style ..............278,280,286 Air Chucks - Large Bore .............................. 279,281 Air Chucks - Lock-On .................................278-280 Air Compressor Parts & Accessories ............ 20,24 Air Compressors ...............................................21,22 Air Compressors - Duplex ....................................16 Air Compressors - Gasoline........................ 16,21,22 Air Compressors - Reciprocating .................15,17,18 Air Drills ......................................................51,58,64 Air Dryers ...............................................................19 Air Hammers.........................................................63 Air Hammer Accessories ......................................51 Air Hoses .................................................... 32,33,40 Air Liquid Valves ................................................245 Air Tanks ............................................................... 37 Air Tool Accessories ................................... 51,53,66 Air Tools Lubricants & Conditioners ............. 66,67 Air Wedge Bags ................................................ 200 Alignment Camber & Caster Kits ...................... 357 Alignment Camber/Caster Sleeves...................356 Alignment - HD Commercial ..................... 362,363 Alignment Systems ....................................364-366 Alignment Tool Boards ......................................355 Alignment Tools ......................................... 356,363 Angle Connectors - Z-Bore ...............................266 // B // Balancing Beads - ATV/UTV ..............................350 Balancing Beads - Counteract ..........................349 Balancing Beads - EcoBalance ..........................351 Balancing Beads - Motorcycle ..........................350 Balancing Compound - Axion ...........................348 Balancing Compound - EQUAL FLEXX ............. 352 Balancing Compound - MAGNUM + ................. 353 Batteries - Cordless Tools .................................... 74 Bead Boosters ..................................................... 181 Bead Breakers .............................................. 166-171 Bead Breaking Tools ........................................... 171 Bead Busters ...................................................... 156 Bead Expanders ..................................................182 Bead Holders ...................................................... 186 Bead Hooks ..........................................................173 Bead Keepers ......................................................182 Bead Lifting Tools ..............................................302 // B // Bead Sealers ...........................402,410,421,425,431 Bead Seater Parts & Accessories ................ 176-181 Bead Seater Upgrade Kits ..................................179 Bead Seaters................................................. 176-181 Bench Grinders ...................................................370 Bench Vises ................................................. 370,371 Block-Off Collar ..................................................267 Blow Guns ........................................................ 33,37 Blue Triangle ID Patches.................................... 414 Brake Drum Handler ........................................... 151 Brake Drum Hardware ....................................... 109 Brake Hub Cleaning Discs .................................. 117 Brushes ............................................................... 375 Buffing Blades ....................................................462 Buffing Stones ................................................... 450 Buffout Wheels .......................................... 435,436 Bushings & Adapters ...........................................39 Buzzout Wheels .................................................445 // C // Cabinet Kits - Prepackaged ..............................407 Cabinets .................................99,344,404,456-458 Cabinets - Tire Changer .....................................294 Calcium Chloride Pumps ............................. 183,184 Camber & Caster Tools ...............................356-361 Can Liners ...........................................................384 Carbide Cutting Tools ....................................... 450 Cement Cans & Brushes ....................................442 Cement Dispensers ............................................424 Cements ........................................408,421,425,426 Cements - Heat Cure........................... 408,426,431 Cements - Vulcanizing ...........402,410,421,431,469 Check Towers ......................................................366 Check Valve ........................................................263 Chrome Nut Pullers ............................................ 106 Clamp Socks .......................................................303 Clamps ........................................................ 295,303 Clamps - Motorcycle ..........................................303 Clamps - Pinch .................................................... 40 Contour Wheels .......................................... 435,436 Contour Wheels - Flared ..........................444-446 Contour Wheels - Low Profile ...........................445 Cord Reels .............................................................30 Core Housings ......................................257,258,262 Core Housings - Z-Bore .....................................266 Couplers & Plugs ............................................ 34-39 Couplers & Plugs - Rethread .............................465 Crib Stands ..........................................................174 // C // Cribbing Blocks .............................................174,175 Crossfire Replacement Hoses ...........................256 Cushion Gums..................................... 426-427,468 Custom Bent Swivel Valves & Exten. ................265 Cut-Off Tools ..................................................48-58 Cutters ...................................................................48 // D // Damage Detection Equipment .........................295 Demount Tools ................................................... 169 Die Grinders ..........................................................63 DOT Conspicuity Tape ........................................395 Drain Pans ................................................... 388,389 Driving Irons ........................................................ 171 Dual Wheel Separators ...................................... 201 Dunk Tanks ................................................. 389,452 // E // Engine Cranes & Stands .................................... 150 Envelope Lube ....................................................470 Envelope Storage Cart ........................................471 Envelope Tester ...................................................471 Envelopes.............................................................471 Eraser Pads ...........................................................58 Exhaust Hose Systems .......................................369 Extruder Rope Rubber .......................................427 Eyewash Stations ...............................................395 // F // Face Shields ........................................................394 Ferrules .................................................................39 Fifth Wheel Grease ............................................349 Filters - Coalescing/Oil Removing ......................26 Filters - General Purpose ....................................26 Filters - Modular ...................................................25 Filters & Regulators - Combination ...............24,25 Flange Ring Puller ...............................................173 Floor Dispenser Racks .......................................383 Floor Mats ................................................... 382,384 // G // Gasket Scrapers .................................................. 372 Gauge Checking Stations ..................................276 Gauges - Adjustable .......................................... 275 Gauges - Air/Liquid ........................................... 274 Gauges - Automotive ........................................ 272 Gauges - Brake Thickness .................................. 211 Gauges - Digital ......................................... 274-276 Gauges - Large Bore ...........................................281 Gauges - Large Bore Dial .................................. 274 474

475 ALPHABETICAL INDEX // G // Gauges - Master Test .........................................276 Gauges - Passenger ...........................................267 Gauges - Pencil .................................................. 277 Gauges - Radial Runout ..................................... 211 Gauges - Tread Depth ...................................210,211 Gauges - Truck .....................................272,275,277 Gloves - Micro Diamond ....................................399 Gloves - Work .................................................... 400 Gloves - Work Polyester ....................................399 Grease Gun Kit...................................................... 73 Grinders .......................................................... 49,50 // H // Hammer Replacement Handles ........................ 195 Hammers ...................................................... 192-195 Hand Cleaners & Surface Wipes ................376,377 Handle Protectors ...............................................127 Hard Hats ...........................................................397 Hearing Protection .............................................394 High Pressure Strut Valves ................................256 Hole Applications ...............................................462 Hose Clamps - 2-Ear ........................................... 40 Hose Crimpers ................................................ 39,40 Hose Cutters ......................................................... 33 Hose Reel Bumpers ..............................................29 Hose Reels ...................................................... 28-32 Hose Reels Stops .................................................. 32 Hose Splicers ........................................................39 Hoses - Valve ......................................................256 Hub Cover Installation Tools .............................. 110 Hub Grinders ....................................................... 117 Hub Lube.............................................................470 Hub Replacement Pins .............................. 462,463 Hub Replacement Spacers ................................463 Hub Replacement Stems ...................................467 Hub Replacements .............................................462 Hydraulic Couplers ..............................................172 Hydraulic Hoses ...................................................172 Hydraulic Pumps ..........................................164,165 // I // Impact Socket Sets ...................................59,77-84 Impact Sockets - Individual .......................... 83,84 Impact Wrench Anvils .........................................59 Impact Wrenches - 1" ...................... 44,45,54,61,62 Impact Wrenches - 1/2" .......................43,53,59,60 Impact Wrenches - 3/4" ............................44,60,61 Impact Wrenches - 3/8" ................................ 43,60 // I // Impact Wrenches - Cordless ......................... 69,70 Inflating Connections.........................................256 Inflation Cage Accessories ............................... 209 Inflation Cages .......................................... 205-208 Inflation Chuck ...................................................263 Inflation Systems - Nitrogen ............................... 23 Inflator Adapters ................................................262 Inflator Gauges ...................................................287 Inflator Gauges - Large Bore ............................288 Inflator Kits - Multi Tire .....................................286 Inflator Systems ..................................285,286,288 Inflator System Accessories ...................... 285,286 Inflators - Analog ...............................................284 Inflators - Automatic .........................................282 Inflators - Chuck .................................................284 Inflators - Digital ........................................282-284 Inflators - Heavy Duty .......................................283 Inflators - Heavy Duty Hose ..............................284 Inflators - Z-Bore ...............................................266 Inner Liner Sealers ................................421,425,431 Inner Liners ........................................................ 402 Inner Rim Cleaner ............................................... 117 Inner Liner Scraper ............................................442 Insert Repair Tools .....................................440,443 Insert Tire Repair........................................ 405,410 Inspection Towers ..............................................366 // J // Jack - Replacement Parts............................120,126 Jack Block ............................................................128 Jack Oils .............................................................. 149 Jack Pads .................................................... 329,330 Jack Plates .................................................... 124,128 Jack Replacement Parts ..................................... 131 Jack Stands ............................... 128,136-140,147,148 Jacks - Bottle ............................................... 120-123 Jacks - Forklift .....................................................143 Jacks - HD / Mines ..............................................135 Jacks - Heavy Duty Multi Stage ........................ 134 Jacks - High Capacity Air Lift............................ 140 Jacks - High Capacity Floor Jacks .................... 129 Jacks - Floor Service ....................................125-134 Jacks - Transmission .................................. 142-144 Jacks - Truck .................................................129-133 Jacob Adaptors ..................................................438 Jump Starters ................................................73,368 // K // Key Tags ..............................................................382 Knee Pads ....................................................395,397 Knives - Misc .......................................................437 Knives - Rubber..................................................437 Knives - Skiving..................................................437 Knives - Tire Repair............................................437 // L // L-Rings .................................................................261 Large Bore - PT Valve Systems .........................267 Large Bore Valves ..............................................264 Large Bore Straight Valves .................................261 Large Bore Swivel Spud .....................................261 Large Bore Swivel Valves .......................... 259,260 Large Bore Valve Repair ....................................262 Lead-Wire Combination Units ...........................431 Leak Detector .......................................160,402,421 Lifting Table - Hydraulic .....................................143 Lift Pads ......................................................328-330 Lifts - Alignment ................................................320 Lifts - Inground .................................................. 327 Lifts - Two Post ..........................................320-325 Lifts - Rolling Jack .............................................326 Lights ..................................................................379 Lights - Tire Service ........................................... 451 Liquid Fill Tools ..................................................258 Liquid Lubricants ......................................... 158,159 Loader Valves ......................................................261 Lock Ring Tools ................................................... 191 Locking Lug Ket Set ........................................... 103 Lube Bottles .......................................................302 Lubricators ............................................................ 27 Lug Nut & Wheel Stud Checker Set ................... 114 Lug Nut Cover Wrench ....................................... 110 Lug Nut Indicators ......................................... 93,94 Lug Nut Removers ....................................... 100,101 Lug Nut Torque Chart ..........................................86 Lug Nuts .......................................................... 97-99 Lug Stud Remover ............................................. 198 Lug Wrenches ..................................................... 199 Lug-Off Kits .......................................................... 111 // M // Mobile Air Tool Stations ......................................68 Manifold Kits .......................................................286 Mold Lubricants ................................................. 469 Mount/Demount Heads .............................304,305 Mount/Demount Tools ................................. 185-191

476 ALPHABETICAL INDEX // N // Nailhole Reamers ...............................................445 Nailhole Testers ..................................................465 Needle Scalers ......................................................63 Non-Impact Wrenches.........................................46 // O // O-Ring & Lock Ring Installer ..............................173 O-Rings ................................................................261 O-Ring Tools ........................................................261 Oil Dispensers .................................................... 390 Oil Drain Funnels ................................................389 Oil Drains ....................................................386-388 Overbuff Sealant ................................................ 410 // P // Pad Lifts ...............................................................319 Paint Sticks & Markers ........................................163 Patch - HD Bias Repair ............................. 404,405 Patch Plug Combi Units ........ 403,409,417,429,431 Patch Prep Wheel ............................................. 405 Patches - AG Radial Repair ...........411,412,415,422 Patches - Bias Repair ....................412,419,422,430 Patches - Heat Cure Bias Repair ........................413 Patches - Heat Cure Radial Repair ....................413 Patches - Heat Cure Universal Repair ...............413 Patches - OTR Radial Repair .............................423 Patches - OTR Bias Repair .................................424 Patches - Radial Repair ................. 411,414,419,430 Patches - Radial Repair Low Pro Tires ............. 415 Patches - Tube Repair .........................409,416,429 Patches - Univ. Bias & Radial ...... 409,417,420,422 Patches & Plugs .................................................. 418 Penetrants .......................................................... 160 Placard - Tire Pressure ....................................... 219 Pliers...................................................... 372,373,441 Pliers - Oil Filter ..................................................391 Poly Ease Release Liners ...................................467 Poly Plugs ...........................................................445 Power Brushes ............................................448,449 Pre-Buff Cleaner ....................402,410,421,424,431 Pressure Cups ................................................317,318 Printers - Static Cling ........................................382 Probes & Tawls ................................... 440,442,443 Pry Bar Sets ................................................ 373,200 Push Bar - 2-Way ................................................173 Push Off Tools .....................................................173 // Q // Quick Chuck Adapters ............................... 438,439 Quick Nut Accessories ........................................318 Quick Nuts ...........................................................317 // R // Radiator Filler .................................................... 390 Rams.............................................................. 152,153 Rasp Blade Spacers ........................................... 461 Rasp Blades .................................................461,462 Rasp Rotary Gouges ......................................... 464 Rasps - Contour Cup ..........................................434 Rasps - Mini ....................................................... 464 Rasps - Slotted ...................................................434 Rasps - Squiggly ............................................... 464 Ratchets ................................................................47 Ratchets - Cordless .............................................. 72 Razor Blades .......................................................438 Rebuild Kit ..........................................................303 Regulators ........................................................... 27 Repair Compounds ............................................425 Repair Cords .......................................................427 Repairs & Replacement Valves ........................ 409 Replacement Rib Nuts ......................................... 111 Resharpening Stones .........................................462 Retractable Barriers ...........................................396 Retread Brushes ................................................ 466 Rib Nut Salvage Tool ........................................... 111 Rim Assemblies & Replacement Belts .............467 Rim Hole Plugs ................................................... 257 Rim Nuts & Bushings ......................................... 257 Rim Protectors ....................................................305 Rim Release ........................................................ 159 Rim Spuds ...........................................................262 Rim Tape .............................................................302 Roller Plates........................................................ 145 Rotary Knife Blades .......................................... 446 Rubber Blocks ....................................................330 Rubberhog Shaft Tools ......................................445 Rubber Solvents .........................................426,469 // S // Safety - Roadside Triangles ..............................396 Safety Cones .......................................................397 Safety Equipment ..............................................397 Safety Flare Kit - LED ........................................396 Safety Glasses ....................................................394 Safety Vests .................................................395,397 // S // Sanders ........................................................... 46,65 Scalers ...................................................................48 Screwdriver set................................................... 372 Sealants .........................................................161,162 Sealer Rings ........................................................467 Seat Covers .........................................................383 Serial Remover Tools .........................................472 Shaft Machines - Wyco ..................................... 466 Shaft Tools ..........................................................445 Shims ........................................................... 362,363 Shop Presses .......................................................331 Sidewall Buffing Cups & Brushes .....................467 Sidewall/Shoulder Prep Wheels ...................... 446 Signs - Road Safety ...........................................397 Slick ...................................................................... 161 Socket Set - Tesla ............................................... 102 Sockets - TPMS ...................................................234 Spacers - Air Glide .................................... 362,363 Spare Tire Tools ................................................... 112 Sprayers .......................................................160,469 Sprayers - Cement ............................................ 466 Spring Compressors ........................................... 332 Spuds - Z-Bore ...................................................266 Square Head Adapters......................................... 111 Squeegees .......................................................... 375 Staples Retread ................................................. 464 Steering Wheel Covers ......................................383 Stichers ............................................................... 441 String Repairs .....................................................428 Stud & Hub Cleaners ...............................50, 115-117 Stud Alignment Tools ....................................... 204 Stud Installers ...................................................... 111 Stud Pilot Bolt Gauge ......................................... 114 Stud Removers ..................................................... 111 Stud Rethread Kit................................................ 101 Studding Equipment ..........................................385 Super Large Bore Check Valves ........................263 Super Large Bore Core Housing .......................262 Super Large Bore Inflator Adaptors .................262 Super Large Bore Inflation Chucks ...................263 Super Large Bore Spuds ....................................262 Super Large Bore Valves ...................................264 Super Large Bore Swivel Angle Connectors ....263 Super Large Bore Swivel Valves .......................263 Surface Conditioning Discs ........................... 49,50 Surface Conditioning Kits ....................................65 Swivel Angel Connectors ...................................263

477 ALPHABETICAL INDEX // T // Tack Bands ......................................................... 466 Tank Valves ...........................................244,256,261 Tap & Die Set ...................................................... 102 Thread Gauge ...................................................... 114 Ticket Holders .....................................................382 Tire Bags .............................................................383 Tire Branding Inserts .........................................472 Tire Buffer Accessories ................................ 56,438 Tire Buffers .................................... 48,55,57,64,432 Tire Buffers - Cordless ..........................................71 Tire Carts ...................................................... 380,381 Tire Changer Accessories - Coats .....................294 Tire Changers ............................................292-308 Tire Changers - Manual...............................201,202 Tire Changers - Truck ........................................ 306 Tire Changing Stands..................................189,202 Tire Denailer .......................................................442 Tire Displays ........................................................381 Tire Dollies ..........................................................380 Tire Dunkers ........................................................452 Tire Inflators - Cordless ....................................... 73 Tire Insert Kits ........................................... 405,406 Tire Irons .......................................171, 188, 190,200 Tire Label - Generic Adhesive ...........................382 Tire Labels ...........................................................384 Tire Lifter ............................................................ 146 Tire Mounting Compounds ......................... 156-159 Tire Mounting Compounds - Black ............. 156,157 Tire Mounting Pastes ...................................155-158 Tire Paint .............................................................470 Tire Paste Brushes ........................................ 155,158 Tire Racks .............................................................381 Tire Reamers .......................................................438 Tire Regroovers ..................................................472 Tire Related Hand Tools ..................... 438,440,443 Tire Repair Kits ........................................... 407,428 Tire Repair Kits - Cordless ....................................71 Tire Repair Tool Pouch .......................................442 Tire Slings ............................................................173 Tire Spreader Accessories .................................454 Tire Spreaders ............................................452-455 Tire Swabs .............................................. 157,158,302 Tire Talc ................................................. 410,421,424 Tire Valve Grommets ..........................244,248,254 Tire Valves Metal Clamp-In ...............................244 Tire Valves - Cores .............................................248 Tire Valves - Motorcycle ....................................244 // T // Tire Valves - Passenger .....................................244 Tire Valves - Passenger/LightTruck ..................244 Tire Valves - Specialty ...............................246-249 Tire Valves - Trailer/Farm .......................... 244,246 Tire Valves - Truck ......................................245-249 Tire Valves - Tube Repair ..................................246 Torque Extensions ........................................... 91,92 Torque Multipliers ................................................89 Torque Socket Sets ..............................................92 Torque Sockets ................................................ 91,92 Torque Wrench Checkers .................................... 90 Torque Wrenches .......................................... 86-90 Torque Wrenches - Cordless ...............................89 TPMS Accessory Kits ............ 229,230,232,233,240 TPMS Adapters ....................................................231 TPMS Commercial Sensors .................. 224,225,241 TPMS Commercial Valves .................... 225,231,247 TPMS Diagnostic Tools ................................242,243 TPMS Kits ............................................................227 TPMS Labels........................................................243 TPMS Replacement Valves ................................ 219 TPMS Sensors ..................215-225,237,238,241,242 TPMS Sensor & Tool Kits .....................................221 TPMS Sensor Valves ............................ 221,226-232 TPMS Tools ............................. 217,225,226,234-236 TPMS Valve Kits ..................................................226 TPMS Valves................................................ 240,242 Tread Depth Wireless Tool .................................218 Truck Ramps ....................................................... 130 Truck Tire Mount/Demount Sets ....................... 189 Tube Repairs - Feather Edge ............................429 Tube Valves ......................................................... 257 Tube Valve Accessories ..................................... 257 Turret Valves ........................................260,263,264 // V // Vacuums -Tire Repair ........................................ 449 Valve & Core Tools...............................................271 Valve Adapter Guns ...........................................258 Valve Adapters - Large Bore ............................ 260 Valve Caps ......................226,227,252,253,260,267 Valve Caps - Dual Seal .......................................252 Valve Caps - Large Bore ................................... 260 Valve Caps - Nitrogen ...................................23,252 Valve Caps - TPMS .................................... 240,253 Valve Core Tools .................................................234 Valve Cores ..........................................226,252,260 Valve Cores - Large Bore .................................. 260 // V // Valve Cores - Electroless ............................226,252 Valve Cores - Nickel Plated ....................... 226,240 Valve Extensions .........................253-256,263-266 Valve Extensions - Large Bore ..........................265 Valve Extensions - Super Large Bore ....... 263,264 Valve Extensions - Truck ........................... 253-255 Valve Extensions - Z-Bore .................................266 Valve Extractor & Inflator ..................................258 Valve Gun Adapter ............................................. 184 Valve Insertion & Removal Tools ...............268-271 Valve Replacements...........................................225 Valve Sleeves & Caps .........................................230 Valve Stem Removal Tools .................................251 Valve Stem Wrenches ........................................250 Valve Tools ..................................................268-269 Valve Tools Large Bore ...............................267,268 Valves - PT ..........................................................267 Valves - Swivel ...................................................263 Vulcanizing Cements - OTR ...............................425 Vulcanizing Fluid - Cold ....................................424 // W // Water Adapter Set ............................................. 184 Welding Helmets ................................................397 Wheel & Rim Removal Tool ...............................202 Wheel Alignment - Alcoa ................................... 114 Wheel Arbor Adapters...................................... 466 Wheel Attaching Hardware ........................ 107-109 Wheel Balancer Accessories - Coats ..........316,319 Wheel Balancers ........................................ 309-315 Wheel Bolt Measurment Tool ............................ 210 Wheel Centering Products ................95,96,106,113 Wheel Clamps - Truck ......................................... 110 Wheel Chocks .....................................................398 Wheel Cover Puller ........................................... 200 Wheel Dollies ............................... 145,146,206,204 Wheel Dolly Accessories .................................. 204 Wheel Lifting Bars ............................................. 189 Wheel Lifts ...................................................295,310 Wheel Lock Removers ................................ 104,105 Wheel Mounting Sets ..........................................88 Wheel Nut Indicators & Retainers ......................94 Wheel Nuts - Cone ............................................. 109 Wheel Protectors ..........................................110,189 Wheel Stud Alignment ....................................... 113 Wheel Stud Installers .......................................... 111 Wheel Stud Remover & Installer ....................... 114 Wheel Stud Service Kits ..................................... 112

478 ALPHABETICAL INDEX // W // Wheel Weight Removal Tools ......................58,347 Wheel Weight Hammers ........................... 346,347 Wheel Weight Racks ..........................................344 Wheel Weight Roll Stands ................................343 Wheel Weight Rolls - Adhesive ........................345 Wheel Weight Rolls - Steel ...............................345 Wheel Weight Scrapers .....................................347 Wheel Weight Stickers ......................................344 Wheel Weight Wire Hangers ............................344 Wheel Weights - Adhesive Lead ......................343 Wheel Weights - Adhesive Steel ........341,342,345 Wicking Products .............................................. 468 Wipes & Hand Cleaners ............................. 376-378 Wire Cutting Shears ........................................... 441 Wire Wheel Brushes ......................................... 448 Work Benches ....................................................455 Wrenches - Budd Nut .........................................197 Wrenches - Cap Nut ............................................197 Wrenches - Heavy Duty ............................... 197,198 Wrenches - Oil service ........................................391 Wrenches - Porkchop .........................................197 Wrenches - Truck ............................................... 198 101-00058 .....................15 101-00078 .....................15 101-00158 ......................15 101-00743 ......................22 101-01012 .......................15 101-07431 .......................22 101-10325 .......................16 101-11012 ........................15 101-30691 ......................18 101-30692 .....................18 101-30693......................18 101-30694 .....................18 101-30695 .....................18 101-30696 .....................18 101-30697......................18 101-30698 .....................18 101-30699 .....................18 101-30700 .....................18 101-30701 ......................18 101-30702 ......................18 101-30703 ......................18 101-30704 .....................18 101-30705 ......................18 101-30706 .....................18 101-40780 .....................15 101-40781 ......................15 101-40782 .....................15 101-40783......................15 101-41012 .......................15 101-41112 ........................15 101-41512 .......................15 101-42112 .......................15 101-42512 ......................15 101-43512.......................15 101-44112 .......................15 101-44512 ......................15 101-50080 .....................21 101-51120 .......................16 101-53120 ......................16 101-54120 ......................16 101-58000 .....................18 101-61012 .......................17 101-61081 .......................17 101-61212 .......................17 101-61512 .......................17 101-61513 .......................17 101-65801 ......................17 101-67514 ......................17 101-67515 .......................17 101-67581.......................17 101-67583 ......................17 101-73580 ......................22 101-73581 .......................22 101-73904...................... 17 101-74580 ......................22 101-75080 .....................21 101-75120 .......................16 101-75314 .......................22 101-75320 ......................16 101-75420 ......................16 101-78000 .....................18 102-11530 .......................16 102-11560 ......................16 102-11880 ......................16 102-13030 ......................21 102-13730 ......................16 102-13760 ......................16 102-13780 ......................16 105-00015 .....................19 105-00025 ....................19 105-00035 ....................19 105-00050 ....................19 105-00075 ....................19 105-00100.....................19 105-00125 .....................19 105-00150 .....................19 106-00519 .....................20 106-11727 .......................20 106-11728 .......................20 106-11729 .......................20 106-11730 ......................20 106-11882 ......................20 106-11883 ......................20 106-11884 ......................20 106-13194 ......................20 106-28530 .....................20 106-37831 ......................16 106-37832 .....................16 106-89090 ....................20 106-94730 ....................20 107-69102 ......................37 111-30002 ......................26 111-32908.......................26 111-32910 .......................26 111-32912 ........................26 111-35200 ......................26 111-35201 ........................26 111-35202 .......................26 111-35203 .......................26 111-35300.......................26 111-35301 ........................26 111-35302 .......................26 111-35303 .......................26 111-35400 ......................26 111-35401 .......................26 111-35402 .......................26 111-35403 .......................26 111-37600 ......................26 111-37601 ........................26 112-00162 ......................27 112-00262 .....................27 112-00352 ......................27 112-00353 ......................27 112-00354 .....................27 112-00376 ......................27 112-00378 ......................27 112-01352 .......................27 112-01354.......................27 112-03910 ......................27 112-03912 .......................27 113-00352 ......................27 113-00353 ......................27 113-00354 .....................27 113-00376 ......................27 113-01352 .......................27 113-01353 .......................27 113-01354.......................27 113-04108 ......................27 114-00754 .....................25 114-03352 ......................25 114-03353 ......................25 114-03354 ......................25 114-13352 .......................25 114-13353 .......................25 114-13354 .......................25 114-75200 ......................25 114-75201 .......................25 114-75202 ......................25 114-75203 ......................25 114-75300 ......................25 114-75301 .......................25 114-75302 ......................25 114-75303 ......................25 114-75400 .....................25 114-75401.......................25 114-75402 ......................25 114-75403 ......................25 115-50508 .....................26 115-50810 ......................26 115-50812 ......................26 115-55200......................26 115-55201 .......................26 115-55300 ......................26 115-55301 .......................26 115-55400 .....................26 115-55401 ......................26 115-57601 .......................26 117-00010 ......................24 117-05050 .....................20 117-05051 ......................20 117-05304 ......................24 117-05702 ......................24 117-09132 .......................24 117-58625 ......................46 119-00130 ......................23 119-00485 .....................23 119-00685 .....................23 121-01225 .......................32 121-01250 ......................32 121-03825 ......................32 121-03851 .......................32 121-14700 ......................32 123-13825 ......................33 123-14012 .......................33 123-14025 ......................33 123-38050 .....................33 123-38125 ......................33 124-04435 .....................28 124-04500 ....................28 124-07450 .....................28

479 NUMERICAL INDEX 124-13500 ......................31 124-15000 .....................31 124-33500 .....................31 124-75450 .....................29 125-00760.....................32 125-01250......................32 125-03500.....................31 125-03501 ......................31 125-03750 .....................31 125-03850 .....................32 125-04500 ....................31 125-04501 .....................31 125-04625 .....................28 125-04750 .....................31 125-05450.....................28 125-05635 .....................28 125-05650 .....................28 125-06350 .....................28 125-06500 ....................28 125-07650 .....................28 125-07650 .....................29 125-07651 ......................28 125-07652 .....................28 125-07670 .....................28 125-07850 .....................29 125-07925 .....................29 125-21202 ......................31 125-21215 .......................31 125-21408 ......................31 125-21410.......................31 125-35000 .....................32 125-35004 .....................31 125-55000 ....................32 125-75635 ......................29 125-75650 .....................29 125-76050 .....................29 125-76070 .....................29 125-76075 .....................29 125-76100 ......................29 125-77650 .....................29 126-00761......................32 126-05425 .....................30 126-05850.....................28 126-07450 .....................29 126-07650 .....................29 126-07850 .....................28 126-07851 ......................28 126-07925 .....................30 126-08110 ......................30 126-08305.....................30 126-08405 ....................30 126-08410 .....................30 126-08500 ....................28 126-21120 ......................29 126-21121 ........................29 126-31120 .......................29 126-31121 ........................29 126-31180 ......................29 126-42500 ....................31 126-43500.....................31 126-45000 ....................31 126-52500 .....................31 126-75835......................29 126-77850 .....................29 126-78050 .....................29 126-78075 .....................29 126-82100 .....................28 126-83050.....................28 126-83051 ......................28 126-84050 ....................28 127-00012 .....................32 127-00038 .....................32 127-01250 ......................33 127-01425 ......................33 127-01450 ......................33 127-03825 .....................33 127-03850 .....................33 127-11004.......................29 127-11040.......................29 127-11043 .......................29 127-12100 .......................33 127-21043 ......................29 127-86871 ......................40 127-86872 .....................40 128-20000 ....................37 128-72021 ......................33 128-72022 .....................33 128-72023 .....................33 128-72024 .....................33 128-72025 .....................33 131-00731.......................35 131-01750 ......................36 131-02514.......................36 131-02516.......................36 131-17000 ......................36 131-18000 ......................36 131-61486 ......................34 131-61523 .......................34 131-61524 .......................34 131-61526 .......................34 131-61527 .......................34 131-61528 .......................34 131-61529 .......................34 131-61531 ........................35 131-61538 .......................34 131-61539 .......................34 131-61548 .......................34 131-61550.......................34 131-61551 ........................34 131-61573 .......................34 131-61574 .......................34 131-61578 .......................34 131-61579 .......................34 131-62523 ......................34 132-03716 ......................36 132-03718 ......................36 132-61476 ......................35 132-61478 ......................35 132-61480 ......................35 132-61481 .......................35 132-61553 ......................35 132-61554 ......................35 132-61558 ......................35 132-61559 ......................35 133-01773 ......................36 133-01855 ......................35 133-05012 ......................36 133-05018......................36 133-17030 ......................36 133-61471 .......................35 133-61474 ......................35 133-61563 ......................35 133-61564 ......................35 133-61568 ......................35 133-61569 ......................35 133-75112 .......................36 133-75116 .......................36 134-61487 ......................35 134-61543 ......................35 134-61544......................35 134-61545 ......................35 134-61552 ......................35 135-00900 ....................35 135-00901 .....................35 135-00910 .....................35 135-00911 ......................35 135-00980 ....................35 135-10605 ......................36 135-10606 .....................36 135-11606 ......................36 135-12606 ......................36 135-61240 ......................36 135-61241 .......................36 136-00344 ....................37 136-00366 ....................37 136-00401 .....................38 136-00406 ....................38 136-00408 ....................38 136-00604 ....................38 136-00606 ....................38 136-00608 ....................38 136-00806 ....................38 136-00808 ....................38 136-01344 .....................37 136-01366 .....................37 136-02344 .....................37 136-02366 .....................37 136-03344 .....................38 136-34490 .....................37 136-61264 ......................39 136-71404 ......................38 136-71405 ......................39 136-71406 ......................39 136-71408 ......................39 136-71440 ......................39 136-71504 ......................38 136-71604 ......................38 136-71606 ......................38 136-71806 ......................38 136-71808 ......................38 136-72404 .....................38 137-00344 .....................39 137-00346 .....................39 137-00366 .....................39 137-00388 .....................39 137-00418 ......................38 137-00420 .....................38 137-00439 .....................38 137-00621 ......................38 137-01324 ......................39 137-01344 ......................39 137-01346 ......................39 137-01348 ......................39 137-01368 ......................39 137-01389 ......................39 137-01418 .......................38 137-01439 ......................38 137-01520 ......................38 137-01621 .......................38 137-01623 ......................38 137-01624 ......................38 137-08550 .....................39 137-10010 ......................33 137-10011 ........................33 137-11420 .......................33 137-11520 .......................39 137-11621 ........................39 137-11623 .......................39 137-39525 ......................39 137-50291 ......................39 137-72421 .......................39 137-73215 .......................39 137-73225 ......................39 137-73235 ......................39 137-73255 ......................39 137-73265 ......................39 137-73275 ......................39 137-73285 ......................39 137-73295 ......................39 137-73305 ......................39 137-73315 .......................39 137-73325 ......................39 137-73335 ......................39 137-73345 ......................39 137-73355 ......................39 151-00826 .....................47 152-00212 ......................60 152-00828 .....................47 152-02115 .......................60 152-07729 .....................43 152-07829 .....................47 152-07830 .....................47 153-00231 ......................60 153-00244 .....................60 153-00734 .....................43 153-02235 .....................59 153-02312 ......................60 153-02442 .....................60 153-07732 .....................43 153-07741 ......................43 153-07748 .....................43 153-07829 .....................47 153-07830 .....................47 153-08281 ......................47 153-12260 ......................53 153-22135 ......................60 153-22235 ......................59 153-22360 .....................59 153-22362 .....................59 153-23120 ......................53 153-32135 ......................60 153-42235 .....................59 153-71523.......................69 153-76920 .....................70 153-76922 ......................70 153-77412 .......................43 153-77482 ......................43 153-94911.......................69 153-96911.......................69 154-00259 ....................60 154-00261 .....................61 154-00772 .....................44 154-01772 ......................44 154-02613 ......................61 154-02616 .....................61 154-07769 .....................44 154-12145 .......................61 154-21617 .......................61 154-22145 ......................61 154-27763 .....................44 154-32145 ......................61 154-37763 ......................44 154-77696 .....................44 155-00280 ....................62 155-00290 ....................62 155-00293 .....................62 155-00295 .....................61 155-02806 .....................62 155-02850 .....................61 155-02856 .....................62 155-07773 .....................44 155-07778 .....................44 155-07779 .....................45 155-07782 .....................45 155-07783 .....................45 155-07971 ......................45 155-07976 .....................45 155-12856 ......................54 155-17779 ......................45 155-17782 ......................45 155-17786 ......................54 155-21710 .......................62 155-26464 .....................54 155-27786 .....................44 155-28506 .....................61 155-28560 .....................62 155-50000 ....................44 155-77736 ......................44 155-77786 ......................44 155-77826......................45 155-77836......................45 155-86920 .....................70 155-86922 .....................70 156-02901 .....................62 156-02931 ......................62

480 NUMERICAL INDEX 156-02951 ......................61 156-28006 ....................62 156-28566 .....................62 156-79716 ......................45 157-00125 ......................63 157-00302 .....................63 157-00307 .....................63 157-00308 .....................63 157-00313 ......................65 157-00327 .....................64 157-00789 .....................51 157-00874 .....................48 157-00875 .....................49 157-00876 .....................49 157-01035 ......................58 157-01327 ......................64 157-01879 ......................51 157-02219 ......................63 157-03252 ......................58 157-03253 ......................58 157-03254 .....................58 157-04038 .....................432 157-06010 .....................432 157-06510 ......................432 157-06520 .....................433 157-06550 .....................432 157-07120 ......................48 157-07302 .....................51 157-07802 .....................64 157-07803 .....................64 157-10874.......................58 157-10875 ......................50 157-14038 ......................432 157-16010 .......................432 157-16510 .......................432 157-16520 ......................433 157-16550 ......................432 157-17302.......................51 157-17802 ......................64 157-17803 ......................64 157-78926 ......................51 158-00311 ......................65 158-00778 .....................46 158-00871 .....................48 158-00873 .....................433 158-01871.......................48 158-03012......................65 158-03873 .....................48 158-07202 .....................46 158-08323 .....................48 158-10871 .......................55 158-10873 ......................55 158-11871 ........................55 158-11873 .......................55 158-12500 ......................57 158-12501 .......................57 158-13873 ......................48 158-40920 ....................71 158-40922 .....................71 158-45922 .....................71 158-65000 ....................57 158-65001 .....................57 159-00132 .....................63 163-00440 ....................82 163-01018 ......................83 163-01019 ......................83 163-01021 ......................83 163-01022......................83 163-01024 .....................83 163-01026 .....................83 163-01032 ......................83 163-01033 ......................83 163-01034 .....................83 163-01036 .....................83 163-01048 .....................83 163-01150 ......................77 163-01151 .......................77 163-01152.......................78 163-01153 .......................78 163-02668 .....................79 163-02669 .....................80 163-02849 .....................78 163-05153 ......................79 163-10143 .......................83 163-10170.......................83 163-10171 .......................83 163-10172 .......................83 163-10174 .......................83 163-10182 .......................83 163-10183 .......................83 163-10190 ......................83 163-10191 .......................83 163-10201 ......................83 163-10210 ......................83 163-10211 .......................83 163-10222 ......................83 163-10223 ......................83 163-10241 .......................83 163-10271 .......................83 163-10280 ......................83 163-10281 .......................83 163-10282 ......................83 163-10300 .....................83 163-10401 ......................83 163-11032 .......................83 163-15260 ......................83 163-22219 ......................77 164-02021 .....................83 164-02024 ....................83 164-02026 ....................83 164-02033 .....................83 164-02034 ....................83 164-02038 ....................83 164-02046 ....................83 164-02110 ......................80 164-02181 ......................79 164-02185 .....................79 164-02235 .....................83 164-02241......................83 164-04626 ....................80 164-20301 .....................83 165-03021 .....................84 165-03026 .....................84 165-03030 ....................84 165-03033 .....................84 165-03035 .....................84 165-03041 .....................84 165-03042.....................84 165-03046 ....................84 165-03052 .....................84 165-03056.....................84 165-03060 ....................84 165-03110 ......................82 165-03119 ......................81 165-03190 .....................82 165-03197 ......................81 165-03321 ......................83 165-03323 .....................84 165-30302 .....................84 165-30330 .....................83 165-30361 ......................84 165-30380 .....................84 165-30381 ......................84 165-30401 .....................84 165-30402 .....................84 165-30410 .....................84 165-30420 .....................84 165-30481......................84 165-30482 .....................84 166-04026 ....................84 166-04033 ....................84 166-04038 ....................84 166-04042 ....................84 166-04191 ......................81 166-04323 .....................84 167-00215 ......................59 167-01012 ......................234 167-01015 ......................234 167-12050 ......................77 167-12051 .......................78 167-12110 ........................83 167-12179 .......................83 167-12460 ......................83 167-12461 .......................83 167-12490 ......................83 167-12910 .......................83 167-12911 ........................83 167-12912 .......................83 167-18195 .......................83 167-21215 .......................83 167-21225 ......................83 167-22225 ......................83 168-00058 ....................88 168-00250 ....................86 168-00425 ....................86 168-00475.....................92 168-00600 ....................86 168-00652 ....................86 168-00652 ....................234 168-00916 .....................88 168-01475 ......................92 168-02026 ....................86 168-02100 .....................90 168-02500 ....................90 168-02880 ....................92 168-03250 .....................90 168-03251 ......................90 168-04400 ....................90 168-04994 ....................91 168-05600 ....................90 168-07600 ....................46 168-07602 .....................46 168-07603 .....................46 168-12065 ......................87 168-12080 .....................87 168-12100 ......................87 168-12120.......................87 168-12140 ......................87 168-12250 ......................87 168-12410 ......................92 168-12412 .......................92 168-12414 .......................92 168-12450 ......................92 168-12465 ......................92 168-12480 ......................92 168-13000 .....................87 168-16000 .....................87 168-18141 .......................89 168-18143 .......................89 168-18147 .......................89 168-21755 ......................92 168-21780 ......................92 168-21910 ......................92 168-21965 ......................92 168-21980 .....................92 168-22180 ......................92 168-22212 ......................92 168-22214 ......................92 168-22610 ......................92 168-23014......................92 168-33004.....................88 168-42760 .....................90 168-42761 ......................90 168-42762 .....................90 168-43528 .....................90 168-47501 ......................88 168-47502 .....................88 168-50116 ......................89 168-60011 ......................86 168-60012 .....................86 168-60020 ....................88 168-60025 ....................88 168-67510 ......................89 168-67518 ......................89 168-96111 .......................88 168-96509 ....................87 169-01002 .....................84 169-01003 .....................84 169-01005 .....................84 169-01020 .....................84 169-01234 .....................80 169-02006 ....................84 169-02010 .....................84 169-02013 .....................84 169-02030 ....................84 169-03006 ....................84 169-03010 .....................84 169-03013 .....................84 169-03020 ....................84 169-04010 .....................84 169-13413 .......................88 169-20100 .....................84 171-01151 ........................63 171-01161 ........................63 171-01171 ........................63 171-47050 ......................51 171-47051 .......................51 171-47052 ......................51 171-47057 ......................51 171-47059 ......................51 171-47061 .......................51 171-47071 .......................51 171-47073 ......................51 171-47074 ......................51 171-47078 ......................51 171-47091 ......................51 171-47095 ......................51 172-55721 .......................72 172-56622 .....................72 173-00018 .....................56 173-00019 .....................56 173-00020 ....................56 173-00022 .....................56 173-00023 .....................56 173-00024.....................56 173-00025 .....................56 173-00026 ....................56 173-00027 .....................56 173-00101 ......................48 173-03253 .....................58 173-09150 .....................438 173-09165 ......................438 173-09166 .....................438 173-09167 ......................438 173-09201 ......................438 173-09202 .....................438 173-09211 .......................438 173-09212 ......................438 173-09213 ......................438 173-09214 ......................438 173-09215 ......................438 173-09216 ......................438 173-09400 ....................438 173-91650 ......................56 173-92010 ......................56 173-92020 .....................56 173-92120 ......................56 173-94000 ....................56 175-00041 .....................59 175-00042 ....................59 175-00061 .....................59 175-00062 ....................59 175-00066 ....................59 175-00142 .....................59 175-00162 .....................59

481 NUMERICAL INDEX 175-00873 .....................56 175-01035 ......................58 175-01590 .....................66 175-11035 .......................58 175-18713 .......................56 175-28713 ......................56 175-31425 ......................66 175-43104 ......................53 175-52122 ......................66 175-81426 ......................66 175-82651 ......................66 175-83071 ......................66 175-91425 ......................66 176-00231 ......................66 176-10212 .......................66 176-10221 .......................66 176-10244 ......................66 176-10261 .......................66 176-10280 ......................66 176-10285 ......................66 176-12313 .......................66 176-13532.......................66 176-17803 ......................66 176-20232 .....................66 176-21132 .......................66 176-21350 ......................66 176-22235......................66 176-23122 ......................66 176-24432 .....................66 176-25925 .....................66 176-26132 ......................66 176-28532 .....................66 176-32135 ......................66 178-01231 .......................66 178-02235 .....................66 178-02335 .....................66 181-00080 .....................67 181-00085 .....................67 181-00404 .....................67 181-00406 .....................67 181-01404 ......................67 181-10510 .......................66 181-10540 ......................66 181-11510 ........................66 181-11540 .......................66 181-12228 .......................66 203-00700 ...................365 203-00900 ...................365 203-01000 ....................365 203-35000 ....................364 203-35001 .....................364 218-00060 ....................326 221-75200 .....................361 221-75400 .....................361 221-75600 .....................361 221-75800 .....................361 222-25430 ....................358 222-25435 .....................358 222-25440 ....................358 222-25445 ....................358 222-66040 ....................360 222-66045 ....................360 222-66047 ....................360 222-67420.....................359 222-67467 .....................360 222-67476 .....................359 222-67660 ....................360 222-67817 .....................359 222-67820 ....................359 222-86252.....................358 222-87520 ....................358 223-82360 ....................360 223-91000 ....................361 223-91040 ....................361 226-23450 ....................360 227-40920 ....................360 228-00761 .....................332 228-00764 ....................332 228-07600 ....................332 228-61400 ....................363 231-00532 .....................361 231-00535 .....................361 231-23180 ......................356 231-23220 .....................356 231-23230 .....................356 231-40840 ....................356 231-77928 ......................356 231-77938 ......................356 231-81240 ......................357 231-81250 ......................357 231-81260 ......................357 231-81270 ......................357 231-81280 ......................357 231-81290 ......................357 231-81295 ......................357 231-86250 .....................358 231-86326 .....................357 231-86375 .....................357 231-86376 .....................357 231-86377 .....................357 236-45938 ....................363 236-77350 .....................363 237-23510 ......................358 237-23520 .....................358 237-23530 .....................358 237-23540 .....................358 241-35001 ......................362 241-35002 .....................362 241-35003 .....................362 241-35004 .....................362 241-35005 .....................362 241-35006 .....................362 241-35007 .....................362 243-00891.....................362 243-00892 ....................362 243-00893 ....................362 243-00894 ....................362 243-00895 ....................362 243-00896 ....................362 243-00897 ....................362 243-00898 ....................362 243-36087 ....................362 246-35010 .....................362 246-35011 ......................362 246-35012 .....................362 246-35020 ....................362 246-35021 .....................362 246-35022 ....................362 246-35030 ....................362 246-35031 .....................362 246-35032 ....................362 246-35040 ....................362 246-35041 .....................362 246-35042 ....................362 246-35060 ....................363 246-35061 .....................363 246-35062 ....................363 246-35070 ....................363 246-35071 .....................363 246-35072 ....................363 246-36000 ...................362 246-36010.....................363 246-36011 ......................363 246-36012 .....................363 247-08130 .....................363 247-33173 ...................... 211 247-37975 .....................361 247-40230 ....................363 247-74910 ......................363 247-77880 .....................361 247-91860 .....................363 247-99918 .....................361 251-88260 .....................355 251-88270 .....................355 301-00020 ....................122 301-00021 .....................122 301-04461 .....................123 301-05612 .....................123 301-05620 ....................123 301-05621 .....................123 301-05630 ....................123 301-14455 ......................123 301-14460 .....................123 301-14461 ......................123 301-14475 ......................123 301-14480 .....................123 301-20220 .....................120 301-20221 ......................120 301-20222 .....................120 301-20224 .....................120 301-20225 .....................120 301-20226 .....................120 301-20227 .....................120 301-20228 .....................120 301-20229 .....................120 301-20255 .....................120 301-41020 .....................122 301-41040 .....................122 301-41060 .....................122 301-41080 .....................122 301-41150 ......................122 301-41200 .....................122 301-41201 ......................122 301-41300 .....................122 301-43202 .....................122 301-43220 .....................122 301-76312 ...................... 121 301-76320 ..................... 121 301-76412 ...................... 121 301-76502 ..................... 121 301-76503 ..................... 121 301-76505 ..................... 121 301-76508 ..................... 121 301-76512 ...................... 121 301-76520 ..................... 121 301-76535 ..................... 121 301-76560 ..................... 121 301-76720 ..................... 121 301-76721 ...................... 121 301-76820 ..................... 121 302-00200 ................... 127 302-00224 ....................133 302-02811 ...................... 147 302-02812 ..................... 147 302-03531 .....................133 302-04220 ....................133 302-05601 .................... 126 302-05603 .................... 126 302-05605 ....................125 302-05613 ..................... 126 302-05614 .....................125 302-05616 .....................125 302-05622 ....................136 302-10802 ..................... 139 302-10803 ..................... 139 302-14140...................... 132 302-14400 ....................138 302-14401......................138 302-14410...................... 139 302-14415 ...................... 139 302-19122 ...................... 131 302-19150 ...................... 131 302-19538 ..................... 131 302-20147 ..................... 131 302-20225 .................... 131 302-20229 .................... 131 302-20333 ....................128 302-20337 ....................128 302-28112 ......................148 302-35002 .................... 127 302-40000 ................... 127 302-42033 ....................128 302-43202 ....................130 302-43222 ....................133 302-45035 ....................128 302-45125 .....................138 302-51005 .....................136 302-52205 ....................128 302-55200 ....................123 302-56502 .................... 132 302-60102..................... 126 302-60107 ..................... 126 302-60109 .................... 126 302-60129 ..................... 126 302-60205 .................... 126 302-60208 .................... 126 302-60215 ..................... 126 302-60508 .................... 126 302-60522 .................... 126 302-61301 ...................... 126 302-61305 ..................... 126 302-61401 ..................... 126 302-61402 ..................... 126 302-61403 ..................... 126 302-61404 .................... 126 302-61503 ..................... 126 302-61606 .................... 126 302-63030 ....................136 302-63060 ....................136 302-63120 .....................136 302-63200 .................... 139 302-70701 ..................... 126 302-70702 .................... 126 302-70703 .................... 126 302-71000 ....................129 302-71100......................129 302-71500 .....................129 302-71550 .....................129 302-72036 .................... 143 302-72081 .....................129 302-72091 .....................129 302-72200 .................... 132 302-72220 ....................129 302-72230.....................129 302-81022 .....................140 302-81033 .....................148 302-81034 .....................148 302-81035 .....................148 302-81050 ....................140 302-81122 ......................140 302-81205 ..................... 137 302-81208 ..................... 137 302-81209 ..................... 137 302-81210 ...................... 137 302-81225 ..................... 137 302-82205 .................... 137 302-82208 .................... 137 302-82209 .................... 137 302-82210 ..................... 137 302-82225 .................... 139 302-88587 .................... 126 302-90050 ...................128 302-91000 .................... 135 302-91001 ..................... 135 302-91003..................... 135 302-91004 .................... 135 302-91005 .................... 135 302-91201...................... 131 302-91202 ..................... 131 302-91203 ..................... 131

482 NUMERICAL INDEX 302-91204 ..................... 131 302-91501...................... 131 302-91502 ..................... 131 302-91503 ..................... 131 302-91504..................... 131 302-91505 ..................... 131 302-91506 ..................... 131 302-91552 ..................... 131 302-91564 ..................... 131 302-92004....................134 302-92006 ....................134 302-92007 ....................134 302-92010.....................134 302-93200 ....................130 302-93731 .....................130 302-93733 .....................130 304-00009 ...................322 304-00010 ....................321 304-00012 ....................324 304-00111 ......................323 304-00112 .....................324 304-00163 ....................325 304-00200 ...................325 304-00202 ...................325 304-00210 ....................322 304-00210 ....................323 304-00211 .....................323 304-00812 ....................320 304-00814 ....................320 304-00816 ....................320 304-01623.....................325 304-04101 .....................319 304-04104 ....................319 304-04210 ....................320 304-04212 ....................320 304-04216 ....................320 304-04220 ...................320 304-08415 ....................320 304-08419 ....................320 304-14210 .....................320 304-14212 ......................320 304-14216......................320 304-14220 .....................320 304-18415 ......................320 304-18419......................320 305-01020 ....................327 305-01220.....................327 307-01021 ......................327 308-10321 ...................... 135 308-10322 ..................... 135 308-10323 ..................... 135 308-10324 ..................... 135 308-82990 ....................140 308-82992 ....................140 308-82999 ....................140 308-91005 .................... 135 309-00003 ...................328 309-00005 ...................328 309-00006 ...................328 309-00007 ...................328 309-00009 ...................328 309-00011 .....................330 309-00013 ....................330 309-00014 ....................328 309-00019 ....................330 309-00022 ...................328 309-00404 ...................329 309-00405 ...................329 309-01201 ..................... 149 309-01450 .................... 149 309-04201 .................... 149 309-04404 ................... 149 309-06757 ....................329 309-10925 ..................... 149 309-11450 ..................... 149 309-12121 ....................... 124 309-14404 .................... 149 309-14462 ..................... 124 309-14463 ..................... 124 309-14464 .................... 124 309-14465 ..................... 124 309-14466 .................... 124 309-14468..................... 124 309-14469..................... 124 309-14472 ..................... 124 309-14473 ..................... 124 309-14500 .................... 124 309-14501 ..................... 124 309-14503 ..................... 124 309-18181 ...................... 124 309-22904 ....................330 309-24468 .................... 124 309-26784 ....................329 309-48501 .................... 145 309-48511 ..................... 145 309-61275 .....................326 309-62226 ....................330 309-62244 ....................330 309-72501 ..................... 142 309-72502 .................... 142 309-72504 .................... 142 309-72505 .................... 142 309-72506 .................... 142 309-72507 .................... 142 309-72508 .................... 142 309-72517 ..................... 142 309-72525..................... 142 309-72533 ..................... 142 309-93291 ..................... 149 309-93294 .................... 149 309-93624 ....................329 311-03942 ......................371 311-03943 ......................371 311-03948 ......................371 311-21500 ......................370 311-28805 ......................370 311-28806 ......................370 311-28807 ......................370 311-28808 ......................370 311-28810.......................371 311-28811 ........................371 311-28812 .......................371 311-28813 .......................371 311-28814 .......................371 311-63005 .....................371 311-63006 .....................371 311-63008 .....................371 311-64055......................370 311-64065 .....................370 311-64650 .....................370 311-64800 .....................370 311-65004 .....................371 311-65005 .....................371 311-77101 ........................370 311-77102 .......................370 311-77103 .......................370 311-77172 .......................370 312-00380.....................379 312-01000 .....................451 312-07179 ......................379 312-08473 .....................451 312-14923 ......................451 312-39001 ......................379 312-40503 .....................30 312-40504 ....................30 312-45451 ......................30 312-45453 .....................30 312-45454 .....................30 312-45455 .....................30 313-00058 ....................250 313-00158......................250 313-00916 .....................250 313-01916 ......................250 313-09411 ......................374 313-09415 ......................374 313-09511.......................374 313-09515 ......................374 316-00058 ....................40 316-00102 .....................40 316-00507 ....................40 316-00709 ....................40 316-00911 ......................40 316-01098 .....................40 316-01113 .......................40 316-01315.......................40 316-01517 .......................40 316-01518 ......................40 316-01720......................40 316-01922 ......................40 316-02023 .....................40 316-02225 .....................40 316-02327 .....................40 316-03740 .....................40 316-91098 .....................40 317-00820 .....................332 317-00834 .....................332 317-00837 .....................332 317-78024......................331 317-78055 ......................331 317-78057 ......................331 317-78058 .....................331 317-78077 ......................331 317-78078 ......................331 317-78110 .......................331 318-04120 ..................... 172 318-04960 .................... 172 318-10300 ..................... 152 318-10312 ....................... 152 318-10314 ....................... 152 318-10518 ....................... 165 318-10808 ..................... 165 318-10809 ..................... 165 318-11090 ......................168 318-11518 ........................ 165 318-13000 ..................... 152 318-13081 ....................... 152 318-13120 ....................... 152 318-13140 ....................... 152 318-13154 ....................... 152 318-13155 ....................... 152 318-13170 ....................... 152 318-15000 .....................164 318-15010 ......................164 318-15020 ......................164 318-15025 ......................164 318-15901 .......................164 318-15905 ...................... 165 318-15906 ...................... 165 318-15907 ...................... 165 318-15920 ......................164 318-15930 ......................164 318-15940 ......................164 318-15950 ......................164 319-00005 ....................372 319-00012 ..................... 102 319-00033 ....................200 319-00337 .....................373 319-00357 .....................373 319-00358 .....................373 319-00526.....................373 319-01023......................372 319-01024 .....................372 319-01337 ......................373 319-01358 ......................373 319-01447......................373 319-02080 ....................372 319-02081 .....................372 319-03732 .....................36 319-12125 ....................... 102 319-12150 ....................... 102 319-14125 ....................... 102 319-14150....................... 102 319-19800 .....................372 319-22125 ...................... 102 319-22150 ...................... 102 319-24125 ...................... 102 319-24150 ...................... 102 319-46464 ....................261 319-72521 ......................234 319-76403 .....................200 319-96090 .................... 112 319-96091 ..................... 112 319-96092..................... 112 319-96093 ..................... 112 319-96094 .................... 112 319-96095 .................... 112 319-96096 .................... 112 319-96097 ..................... 112 319-96098 .................... 112 322-00738 ....................389 322-02444 ....................452 322-11102 .......................387 322-11210 .......................388 322-17432 ......................387 322-17892 ......................389 322-17922 ......................389 322-17972 ......................389 322-17982 ......................389 322-19202 .....................388 322-19602 .....................390 322-19822 .....................452 322-41203 .....................388 322-41206 .....................388 322-41461 ......................388 322-41467 .....................388 322-87738 .....................389 322-87838 .....................389 322-90045 ....................388 324-64621 .....................73 328-10001 .....................66 329-00505 ....................390 329-01540.....................391 329-01544 .....................391 329-08874 ....................386 329-08878 ....................386 329-08890 ....................386 329-08895 ....................386 329-19702 .....................390 329-19732 ......................390 329-19852 .....................388 329-50750 ....................391 329-53500 ....................391 329-53700 ....................391 329-61570 .....................391 329-61600 ....................391 329-63600 ....................391 331-78106 ......................150 331-78155 ......................150 331-78600 .....................150 331-78605 .....................150 341-00119 ......................368 341-00121 ......................368 341-00122 .....................368 341-00165 .....................368 341-01352 ......................368 345-11812 .......................74 345-11835 ......................74 345-11850 ......................74 345-11852 ......................74 345-12430 .....................74

483 NUMERICAL INDEX 345-12440 .....................74 345-12460 .....................74 345-38412 .....................73 361-02150......................393 361-02180 .....................393 361-02250 .....................393 361-02280 .....................393 361-11234 .......................392 361-12180 .......................393 361-34288 .....................392 361-34788 .....................392 361-34789 .....................392 361-34988 .....................392 371-03321 ......................144 371-03332 .....................144 371-72000 ..................... 143 371-72001 ...................... 143 371-72450 ..................... 142 371-72501 ...................... 142 371-72550...................... 142 371-72701 ...................... 143 371-72850 ..................... 143 391-00125 .....................369 391-00130 .....................369 391-00140 .....................369 391-00225 .....................369 391-00230 ....................369 391-00240 ....................369 391-00325 .....................369 391-00330 ....................369 391-00340 ....................369 391-00350 ....................369 391-00425 ....................369 391-00430 ....................369 391-15250 ......................369 391-15300 ......................369 391-15350 ......................369 391-15400 .....................369 391-20030 ....................369 391-20040 ....................369 391-20050 ....................369 391-20060 ....................369 391-21025 ......................369 391-21030 ......................369 391-21040 .....................369 391-22030 .....................369 391-22040.....................369 391-22050 .....................369 391-22150 ......................369 391-22160 ......................369 391-52500 .....................369 391-53000 ....................369 391-54000 ....................369 391-90250.....................369 391-90300 ....................369 391-90350 .....................369 391-90400 ....................369 391-90475 .....................369 391-90575 .....................369 391-90600 ....................369 391-90606 ....................369 391-91000 .....................369 391-91250 ......................369 391-91300 .....................369 391-93000 ....................369 395-00101 .....................378 395-00102 ....................378 395-00103 ....................378 395-00104 ....................378 395-00125 .....................378 395-00126.....................378 395-00300 ...................378 395-00400 ...................378 395-06400 ...................378 395-06401 ....................378 395-06402 ....................378 395-10000 ....................377 395-10100 .....................470 395-13124 ......................375 395-20003 ....................376 395-20009 ...................377 395-20046 ....................376 395-20065 ....................376 395-20069 ....................376 395-20070 ....................377 395-40000 ...................378 395-42023 ....................375 395-44020 ....................375 395-45507 ....................375 396-00003 ...................396 396-00048 ...................397 396-00102 ....................398 396-00302 ....................399 396-00303 ....................399 396-00304 ...................399 396-00305....................399 396-00357 ....................396 396-00403 ...................399 396-00404 ...................399 396-00405 ...................399 396-00901 ....................394 396-00902 ...................394 396-02996 ....................397 396-06780 ....................400 396-10011 ......................400 396-10206 .....................397 396-10216 ......................397 396-12996 .....................397 396-14200.....................394 396-14955 .....................394 396-15300 .....................398 396-15336 .....................398 396-15337 ......................398 396-15338 .....................398 396-15339 .....................398 396-15342 .....................398 396-15353......................398 396-20392 ....................397 396-20773 ....................394 396-21000 ....................394 396-22996 ....................397 396-23412 .....................394 396-23421 .....................394 396-23430 ....................394 396-30551 .....................395 396-30552 ....................395 396-30553 ....................395 396-30554 ....................395 396-30561 .....................395 396-30562 ....................395 396-30563 ....................395 396-30564 ....................395 396-40317 .....................400 396-47101......................397 396-47104 .....................397 396-50317 .....................399 396-50318 .....................399 396-50319 .....................399 396-50320 ....................399 396-55220 ....................400 396-55223 ....................400 396-58201 .....................397 396-58215 .....................397 396-62150 .....................395 396-72150 .....................395 396-72182 .....................395 396-73601 .....................394 396-73611 ......................394 396-73621 .....................394 396-75027 ....................396 396-82150 .....................395 396-90306....................395 396-90333 ....................395 396-92150 .....................395 396-93150 .....................395 396-95055 ....................396 396-95056 ....................396 396-96110 .....................395 399-00101 .....................382 399-00102 ....................382 399-00103 ....................382 399-01719 .....................384 399-11111 ........................382 399-98313 .....................382 399-98894 ....................383 399-99075 ....................384 399-99302 ....................382 399-99323 ....................382 399-99391 .....................383 399-99392 ....................383 399-99415 .....................383 399-99429 ....................383 399-99432 ....................382 399-99433 ....................383 399-99435 ....................383 399-99479 ....................382 401-02840 ....................104 401-02841 .....................104 401-28401 .....................104 401-28402 ....................104 401-28403.....................104 401-28404 ....................104 401-28405 ....................104 401-28406 ....................104 401-28407 .....................104 401-28408 ....................104 401-28409 ....................104 401-69260 .................... 114 401-69290 .................... 114 402-00001 .................... 117 402-00002 ................... 117 402-00003 ................... 117 402-00010 .................... 117 402-00012 .................... 117 402-00013 .................... 117 402-00020 ................... 117 402-00030 ................... 117 402-00032 ................... 117 402-00033 ................... 117 402-00050 ...................190 402-00060 ...................190 402-00080 ...................190 402-00160 ....................190 402-00900 ...................190 402-01160 .....................190 402-01283 ..................... 103 402-01640 .................... 115 402-01650 .................... 115 402-01900 ....................190 402-02001 ....................188 402-02002 ...................188 402-02005 ...................188 402-02006 ...................188 402-02100 ....................188 402-02101 .....................188 402-02102 ....................188 402-02312 ..................... 102 402-03016 ....................106 402-03116 .....................106 402-04300 ...................190 402-04301 ....................190 402-04311 .....................190 402-04401 ....................190 402-06002 ...................110 402-06662 ................... 173 402-07545 .................... 117 402-07546 .................... 117 402-07547 .................... 117 402-08029 ................... 173 402-10012 ..................... 115 402-10022 ..................... 115 402-10100 ..................... 116 402-10101 ...................... 116 402-10104 ..................... 116 402-10112 ...................... 115 402-10122 ...................... 115 402-10222 ..................... 115 402-11000 .....................110 402-11114 ....................... 115 402-17000 ....................110 402-18000 ....................110 402-20001 ....................93 402-20015 ....................93 402-20017.....................93 402-20018 ....................93 402-20019 ....................93 402-20020 ...................93 402-20021 ....................93 402-20023 ....................93 402-20024 ....................93 402-20026 ....................93 402-20027 ....................93 402-20028 ....................93 402-20029 ....................93 402-20030 ...................93 402-20032 ....................93 402-20033 ....................93 402-20034 ....................93 402-20035 ....................93 402-20036 ....................93 402-20040 ...................93 402-20041 ....................93 402-20044 ...................93 402-20046 ...................93 402-20078 ....................93 402-20114 .....................93 402-20133 .....................94 402-20333 ....................94 402-20396 .................... 187 402-20397 .................... 187 402-20406 ................... 187 402-20408 ................... 187 402-20414 .................... 187 402-20430.................... 187 402-21019 .....................94 402-21021......................94 402-21022 .....................94 402-21030.....................94 402-21031 ......................94 402-21032 .....................94 402-21033 .....................94 402-21036 .....................94 402-21038 .....................94 402-21040 ....................94 402-21041 .....................94 402-21044 ....................94 402-21046 ....................94 402-23133 .....................94 402-24027 ....................94 402-24028 ....................94 402-24030 ....................94 402-24032 ....................94 402-24033 ....................94 402-24038 ....................94 402-24133 .....................94 402-25021 .....................94 402-25022 ....................94 402-25032 ....................94 402-25033 ....................94 402-25133 .....................94

484 NUMERICAL INDEX 402-26021 .....................94 402-26022 ....................94 402-26033 ....................94 402-26038 ....................94 402-28301 ..................... 103 402-28302 .................... 103 402-28303 .................... 103 402-28305 .................... 103 402-28306 .................... 103 402-28307 .................... 103 402-28308 .................... 103 402-28309 .................... 103 402-28310 ..................... 103 402-28311 ...................... 103 402-28312 ..................... 103 402-28313 ..................... 103 402-28314 ..................... 103 402-28315 ..................... 103 402-28316 ..................... 103 402-30606 ...................106 402-31567 .....................200 402-31568 .....................200 402-31820 .....................188 402-32101 ......................188 402-32102 .....................188 402-32119 ......................188 402-32120 .....................188 402-32123 ..................... 191 402-32125 ..................... 191 402-32127 ..................... 191 402-32128 ..................... 191 402-32129 ..................... 191 402-32130 ..................... 191 402-32131 ...................... 191 402-32420 ....................188 402-32610 .....................50 402-32611 ...................... 116 402-32613 .....................50 402-32614 ..................... 116 402-32615 .....................50 402-32616 .....................50 402-33020 ....................188 402-33021 .....................188 402-33022 ....................188 402-33024 ....................188 402-33052 ....................188 402-33062 ....................188 402-33195 ..................... 189 402-33196 ..................... 189 402-33199 ..................... 189 402-33219 .....................188 402-33220 ....................188 402-33223..................... 191 402-33224 .................... 191 402-33238 ....................188 402-33239 ....................188 402-34402 ....................198 402-34645 ....................190 402-34645C ..................190 402-34648 .................... 191 402-34649 ....................190 402-34672 ....................200 402-34674 ....................200 402-34678 ....................200 402-34950 .................... 189 402-35440 ....................188 402-37330 .................... 115 402-37335 ..................... 115 402-37340 .................... 115 402-43351 ..................... 117 402-43352 .................... 117 402-43357 .................... 117 402-43358 .................... 117 402-46000 ...................190 402-46001 ....................190 402-46002 ...................190 402-46003 ...................190 402-47000 ...................190 402-47001 ....................190 402-47002 ....................190 402-47003 ....................190 402-50301 ....................110 402-62600 ...................94 402-90518 .................... 187 402-90519 .................... 187 403-35595 ....................199 403-35620 ....................199 403-35636 ....................199 403-35656 ....................199 403-35657 ....................199 403-35659 ....................199 403-35661 .....................199 403-35662 ....................199 403-35663 ....................199 403-35695 ....................199 403-35696 ....................199 403-35697 ....................199 403-35795 ....................199 404-34543 ....................198 404-34545 ....................198 404-34547 ....................198 404-67300 ................... 101 405-32501 .....................198 405-32502 ....................198 405-32503 ....................198 405-32504 ....................198 405-32505 ....................198 405-32506 ....................198 405-32508 ....................198 405-32509 ....................198 405-32551 .....................198 405-32552 ....................198 405-32553 ....................198 405-32556 ....................198 405-32557 ....................198 405-34401 ....................198 405-35690 ....................199 406-30609 ................... 197 406-30610 .................... 197 406-30612 .................... 197 406-30618 .................... 197 406-30619 .................... 197 406-30620 ................... 197 406-60300 ................... 197 406-60301 .................... 197 406-60302 ................... 197 406-60303 ................... 197 406-60908 ................... 197 407-00350 .................... 151 407-02000 ...................204 407-02000 ...................204 407-03000 ...................204 407-03000 ...................204 407-10400 ....................204 407-11100 ......................204 407-11200......................204 407-11600 .....................204 407-11900 .....................204 407-12000 ....................204 407-47020 .................... 145 407-47053 .................... 145 407-47105 .....................204 407-47110 ......................204 407-70130 .....................203 407-70132 .....................203 407-72040 .................... 151 407-72045 .................... 151 407-82306 ....................146 407-82310 .....................203 407-82312 .....................203 407-82320 ....................203 407-90538 ....................146 407-93766 ....................203 408-00026 ...................160 408-00116 .....................160 411-03218 ...................... 211 411-65201 ...................... 211 411-97840 ..................... 211 417-07480 .....................50 417-07481 ......................50 417-07485 .....................50 417-07486 .....................50 417-12612 .......................49 417-12613 .......................49 417-12614 .......................49 417-12615 .......................49 417-12617 .......................49 417-12618 .......................49 417-12619 .......................49 417-13003 ......................49 417-13004 ......................49 417-13005 ......................49 417-16210 .......................49 417-16211 ........................49 417-36525......................50 417-36526 .....................50 417-36527 ......................50 417-39120 ......................49 417-39121 .......................49 417-39122 ......................49 417-39202 .....................49 417-39203 .....................49 421-00098 ....................171 421-00100 .....................171 421-12904......................185 421-38620 .....................171 422-10100 ..................... 167 422-10101 ......................168 422-10102 ......................168 422-10103 ...................... 167 422-10301 ...................... 153 422-10302 ..................... 153 422-10303 ..................... 153 422-10304 ..................... 153 422-10305 ..................... 153 422-10306 ..................... 153 422-10316 ...................... 153 422-11000 .....................166 422-11005 ......................166 422-11010 ......................166 422-11015 ....................... 167 422-11020 ......................166 422-11025 ......................168 422-11040 .....................166 422-11044...................... 167 422-11050 ...................... 167 422-11060 ..................... 167 422-11076 ......................168 422-12000.....................166 422-12020 .....................166 422-12070 .....................166 422-12090 .....................166 422-12110 ....................... 167 422-13010 ...................... 153 422-13020 ..................... 153 422-13030 ..................... 153 422-13040 ..................... 153 422-13050 ..................... 153 422-13060 ..................... 153 422-13075 ..................... 153 422-13090 ..................... 153 422-13100 ...................... 153 422-13874 ...................... 170 422-13876...................... 170 422-13878...................... 170 422-14068 ..................... 170 422-16070 .....................166 422-16200 .....................166 422-34549 ....................201 422-40801 ....................168 422-47180 ..................... 169 422-71650 .....................202 422-71655 .....................202 422-92200 .................... 167 422-94549 ....................201 423-00101 ..................... 169 424-35327 .....................194 424-35329.....................194 424-35427.....................194 424-35429 ....................194 424-35460 ....................194 425-35105 ..................... 193 425-35321...................... 193 425-35323 ..................... 193 425-35325 ..................... 193 425-35421 ..................... 193 425-35423..................... 193 425-35425 .................... 193 426-29150 ..................... 195 426-35110 ...................... 195 426-35310 .....................194 426-35311 ......................194 426-35317 .....................194 426-35332 ..................... 195 426-35333 ..................... 195 426-35334 .................... 195 426-35337 ..................... 195 426-35411 ......................194 426-35417 .....................194 426-37003 .................... 195 426-37004 .................... 195 426-37103 ..................... 195 427-00041 ....................171 427-00042 ....................171 427-00052 ....................171 427-01322 .....................171 427-12026 ..................... 169 427-26000 ....................171 427-35924 .....................171 427-35926 .....................171 427-45926 ....................171 428-00001 .................... 192 428-00007 ................... 192 428-00010 .................... 192 428-00014 .................... 192 428-37302 ....................194 428-37304 ....................194 428-37308 ....................194 428-37310 .....................194 428-37312......................194 428-37316 .....................194 428-37320 ....................194 429-06661 .................... 173 429-08074 .................... 174 429-08075 .................... 174 429-08076 .................... 174 429-08077 .................... 174 429-08837 .................... 173 429-10005 .................... 193 429-10010 ..................... 193 429-10108 ..................... 173 429-11900 ..................... 179 429-12500 ..................... 175 429-12501 ...................... 175 429-12502 ..................... 175 429-12503 ..................... 175 429-12531 ...................... 175

485 NUMERICAL INDEX 429-12532 ..................... 175 429-12533 ..................... 175 429-12536 ..................... 175 429-12537 ..................... 175 429-12538 ..................... 175 429-15218 ...................... 174 429-15230 ..................... 174 429-15239 ..................... 174 429-32344 .................... 195 429-35111 ....................... 195 429-35113 ...................... 195 429-35119 ...................... 195 429-35127 ..................... 195 429-35129 ..................... 195 429-35206 .................... 195 429-35211 ...................... 195 429-35218 ..................... 195 429-35219 ..................... 195 429-35230 ....................194 429-35529 .................... 195 429-35832 .................... 195 429-36455 ....................200 429-70162 ..................... 173 429-90401 .................... 173 429-90402 ................... 173 429-90403 ................... 173 431-00001 .....................156 431-00005 ....................156 431-00055 ....................156 432-00730 ....................158 432-00731 .....................158 432-00740 ....................158 432-00750 ....................158 432-01750 .....................158 432-02000 ................... 157 432-02005 .................... 157 432-02008 .................... 157 432-02014 ..................... 157 432-02028 ....................156 432-02029 ....................156 432-02035 ....................156 432-02046 .................... 155 432-02067 .................... 155 432-02088 ....................156 432-02146 ..................... 157 432-02167 ..................... 157 432-10410......................158 432-12014 ...................... 159 432-12046 ..................... 155 432-12067 ..................... 155 432-12178 ...................... 159 432-12180 ...................... 159 432-12183 ...................... 159 432-12214 ...................... 159 432-12278 ...................... 159 432-12280 ..................... 159 432-12282 ..................... 159 432-12490 .....................158 432-12492 .....................158 432-57270 ..................... 161 432-57304 .................... 161 432-57305..................... 161 432-57355 ..................... 161 433-00032 ....................421 433-01950 .....................158 433-01957 .....................158 433-01958 .....................158 433-02020 ....................158 433-02022 ....................158 433-02023 ....................158 433-02053 .................... 159 433-02054 .................... 159 433-02055 .................... 159 433-25430 ....................160 433-25430 ....................402 433-25431 .....................160 433-25431 .....................402 433-81505 ..................... 159 433-81511 ....................... 159 433-81515 ...................... 159 433-81555 ..................... 159 434-02110 ..................... 157 435-00015 .................... 157 435-00125 ..................... 157 435-01120 ..................... 157 435-02480 .................... 159 435-06001 ....................156 435-06002 ...................156 435-06008 ...................156 437-00001 .................... 157 437-00002 .................... 157 437-00003 .................... 157 437-04540 .................... 155 437-04550 .................... 155 437-13014 ...................... 155 441-00220 ....................202 441-00230 ....................202 441-38600 ....................201 441-38601 .....................201 443-00000 ...................295 443-00045 ...................293 443-00055 ...................293 443-00060 ...................297 443-00070 ...................297 443-00080 ...................293 443-00090 ...................293 443-00409 ...................308 443-00801 ....................292 443-00802 ...................292 443-00803 ...................292 443-00804 ...................292 443-00880 ...................292 443-00890 ...................292 443-00891 ....................292 443-00902 ...................292 443-01274 .....................299 443-01504 ....................308 443-01764 .....................298 443-01804 ....................307 443-03000 ...................294 443-03504 ....................307 443-03514 .....................307 443-04002 ...................308 443-05034 ....................300 443-06000 ...................366 443-06500 ...................366 443-06545 ....................295 443-07986 ....................303 443-08234 ....................300 443-08514.....................301 443-08609 ...................295 443-08920....................292 443-09028....................294 443-09041 ....................306 443-09551 .....................306 443-10045 ....................293 443-10055 .....................293 443-10080 ....................293 443-10090 ....................293 443-10802 .....................292 443-11034 ......................303 443-12106......................295 443-16234 .....................301 443-16235 .....................301 443-18134 ......................299 443-18834 .....................300 443-19004 ....................298 443-50501 ....................292 443-50502 ....................292 443-50503 ....................292 443-50504....................292 443-52021 .....................295 443-62801 .....................296 443-63301 .....................306 443-63303 ....................306 443-64501 ....................296 443-70701 .....................292 443-70702 ....................292 443-70703 ....................292 443-70704 ....................292 443-70705 ....................292 443-70706 ....................292 443-70707 ....................292 443-70708 ....................292 443-70709 ....................292 443-70710 .....................292 443-70711 ......................292 443-70712 .....................292 443-70713 .....................292 443-70714 .....................292 443-70715 .....................292 443-70716 .....................292 443-80001 ....................366 443-80002 ...................366 443-80080 ...................292 443-80081 ....................292 443-83604 ....................303 443-84926 ....................303 443-85220 ....................366 443-85221 .....................366 443-85222 ....................366 443-85223 ....................366 443-91825 .....................296 443-92220 ....................298 444-01220 ....................305 444-01221 .....................305 444-01222 .....................304 444-01223 .....................305 444-01224 ....................304 444-01225 .....................305 444-01226 ....................304 444-01228 ....................304 444-01230 ....................304 444-02583 ....................302 444-22019 ....................302 444-23614 .....................302 444-81354 .....................302 444-82961.....................305 444-82963 ....................305 446-00027 ...................306 446-00056 ...................306 448-00001 ....................185 448-00010 ....................186 448-00100 ....................185 448-00101 .....................185 448-00108 ....................185 448-00109 ....................185 448-00110 .....................185 448-00111 ......................185 448-00200 ...................185 448-00201 ....................185 448-00202 ...................185 448-00301 ....................185 448-00400 ...................185 448-01100 .....................185 448-01102 ..................... 127 448-01103 ..................... 127 448-01801 ..................... 127 448-12100 ..................... 169 448-12320 .....................186 448-12880 .....................185 448-12894 ..................... 182 448-22320 ....................186 448-22894 .................... 182 448-32320 ....................186 448-32894 .................... 182 448-42894 .................... 182 448-71000 ....................186 451-00006 .................... 162 451-00008 ....................353 451-00013 .....................349 451-00026 .................... 162 451-00036 .................... 162 451-00055 .................... 162 451-00101 ...................... 162 451-00150 .....................353 451-00200 ....................353 451-00203 ....................349 451-00204 ....................349 451-00205 ....................349 451-00206 ....................349 451-00208 ....................349 451-00210 .....................349 451-00212 .....................349 451-00214 .....................349 451-00216 .....................349 451-00250 ....................353 451-00255 ..................... 162 451-00275 ..................... 162 451-00300 ....................353 451-00400 ....................353 451-00440 .................... 162 451-00500 ....................353 451-00551 ..................... 162 451-00603 ....................351 451-00604 ....................351 451-00606 ....................351 451-00608 ....................351 451-00610 .....................351 451-00612 .....................351 451-00614 .....................351 451-00616 .....................351 451-00618 .....................351 451-00620 ....................351 451-00640 .................... 161 451-00707 ..................... 162 451-01203 .....................351 451-01204 .....................351 451-01206 .....................351 451-01208 .....................351 451-01210 ......................351 451-01212 ......................351 451-01214 ......................351 451-01216 ......................351 451-01640 ..................... 162 451-02640 .................... 162 451-03011 ......................350 451-03012 .....................350 451-03013......................350 451-03022 .....................350 451-03023 .....................350 451-03223 .....................350 451-03233 .....................350 451-04044 ....................350 451-04046 ....................350 451-04048 ....................350 451-04128 ..................... 162 451-04410 .....................350 451-05001 .....................350 451-05002 ....................350 451-05003 ....................350 451-05510 ..................... 162 451-06000 ....................353 451-07000 ....................353 451-10003 .....................353

486 NUMERICAL INDEX 451-14128 ....................... 162 451-15405 ......................353 451-20516 ...................... 161 451-20605 ....................353 451-22203 .....................348 451-22204 .....................348 451-22206 .....................348 451-22208 .....................348 451-22210 ......................348 451-22212 ......................348 451-22214 ......................348 451-22216 ......................348 451-24128 ...................... 162 451-25805 .....................353 451-31005 .....................353 451-32016 ......................352 451-40004 ....................352 451-40006 ....................352 451-40008 ....................352 451-40010 .....................352 451-40012 .....................352 451-40013 .....................353 451-40016 .....................352 451-50002 ....................349 451-50005 ....................84 451-50008 ....................349 451-50010 .....................84 451-50011 ......................84 451-50033 .....................84 451-60021 .....................353 451-64005 .................... 161 451-64015 ..................... 161 451-64055 ..................... 161 451-64155 ...................... 161 451-72305 .....................353 452-00001 ....................472 452-00011 .....................472 452-00012 ....................472 452-00014 ....................472 452-00112 .....................472 452-00114 .....................472 453-71510 ......................249 454-00190 ....................210 454-00200 ...................218 454-00209 ................... 211 454-00599 ...................210 454-00712.....................210 454-01410 .....................210 454-01420 ....................210 454-01599 ....................210 454-05127 .....................210 454-05131......................210 454-05150 ....................210 454-05300 ...................210 454-06763 ....................210 454-11410 ......................281 455-00003 ...................472 455-00129 ....................472 455-00401 ....................472 455-00402 ...................472 455-00403 ...................472 455-00404 ...................472 455-00405 ...................472 455-00406 ...................472 455-00501 ....................472 455-00502....................472 455-00503 ....................472 455-00504 ...................472 455-00505 ...................472 458-00002 ...................385 458-00005 ...................385 458-00010 ....................385 458-00011 .....................385 458-00500 ...................385 458-00911 .....................385 458-03810.....................385 458-03820 ....................385 458-04048 ...................385 459-00257 .................... 163 459-00258 .................... 163 459-61126 ...................... 163 459-61127 ...................... 163 459-61128 ...................... 163 459-61129 ...................... 163 459-80220 .................... 163 459-80221 ..................... 163 459-80222 .................... 163 459-80223 .................... 163 459-80225 .................... 163 459-80226 .................... 163 459-80227 .................... 163 459-80228 .................... 163 459-80229 .................... 163 459-80230 .................... 163 459-80231 ..................... 163 459-80232 .................... 163 459-80257 .................... 163 459-80258 .................... 163 459-80271 ..................... 163 459-82831 ..................... 163 459-82832 .................... 163 459-82834 .................... 163 459-82835 .................... 163 459-82836 .................... 163 459-82842 .................... 163 459-85100 .................... 163 46-57010 .......................225 461-00412 .....................244 461-00413 .....................244 461-00414 .....................244 461-00415 .....................244 461-00418 .....................244 461-00423 ....................244 461-00425 ....................244 461-00438 ....................244 461-00600 ....................244 461-00602 ....................244 461-00611 ......................244 461-00801 .....................244 461-01027 .....................238 461-01029 .....................238 461-01043 .....................238 461-01045 .....................238 461-01052 .....................238 461-01055 .....................238 461-01056 .....................238 461-01203 .....................238 461-01208 .....................238 461-01209 .....................238 461-01212 ......................238 461-01214 ......................238 461-01216 ......................238 461-01217 ......................238 461-01218 ......................238 461-01222 ......................238 461-01225 ......................238 461-01230 .....................238 461-01241 ......................238 461-01382 ......................238 461-02168 .....................238 461-02416 .....................244 461-02495 .....................238 461-02510 .....................238 461-02547 .....................238 461-03166 .....................238 461-03751 ......................238 461-05003 ....................237 461-05134 .....................238 461-05256 .....................238 461-05276 .....................238 461-05310 .....................238 461-05510 .....................238 461-05511 ......................238 461-05512 ......................238 461-05513 ......................238 461-05514 .....................238 461-05523 .....................238 461-05555 .....................238 461-05556 .....................238 461-05557 .....................238 461-05558 .....................238 461-05559 .....................238 461-05775 .....................238 461-06164 .....................238 461-06201 .....................224 461-06561 .....................238 461-06815 .....................238 461-06825 .....................238 461-06829 ....................238 461-07005 ....................237 461-07006 ....................237 461-07007.....................237 461-07008 ....................237 461-07659 .....................238 461-08011 ......................224 461-08012 .....................224 461-09001 .....................238 461-09002 ....................238 461-09004 ....................238 461-09005 ....................238 461-09011 ......................238 461-09012 .....................238 461-09013 .....................238 461-09017 .....................238 461-09018 .....................238 461-09204 ....................238 461-09280 ....................238 461-09342 .....................238 461-09364 ....................238 461-09365 .....................238 461-09398.....................238 461-10078......................221 461-10178.......................221 461-11204 ......................238 461-11217 ........................238 461-15003......................237 461-20326 .....................219 461-20327 .....................219 461-20328 .....................219 461-20330 .....................219 461-21217 .......................238 461-21507 ......................237 461-29020 ....................237 461-29093 .....................237 461-30100 .....................219 461-30170......................224 461-30190 .....................224 461-30210 .....................224 461-30326 .....................215 461-30327 .....................215 461-30331 ......................216 461-30333 .....................216 461-31217 .......................238 461-33500 .....................220 461-33501 ......................220 461-33560 .....................220 461-33561 ......................220 461-33562 .....................220 461-41211 .......................244 461-41311 .......................244 461-53707 .....................225 461-53715 ......................225 461-53718 ......................225 461-53723 .....................225 461-53736 .....................225 461-59307 .....................226 461-59337 .....................226 461-59357 .....................226 461-59387 .....................226 462-00416 ....................244 462-00800 ...................244 462-01147......................246 462-01224 .....................246 462-01416 .....................247 462-01575 .....................247 462-01600 ....................247 462-02416 .....................244 462-03416 .....................247 462-06008 ...................246 462-06010 ....................244 462-06020 ...................244 462-06030 ...................244 462-06040 ...................244 462-11147 .......................245 462-16008 ....................246 463-00500 ...................245 463-00501 ....................245 463-00572 ....................245 463-00573 ....................245 463-00575 ....................245 463-01078 .....................246 463-01175 ......................246 463-01177 ......................246 463-01555 .....................245 463-01571 ......................248 463-01572 .....................248 463-01573 .....................248 463-02554 ....................245 463-05434 ....................245 463-05435 ....................245 463-05444....................245 463-05454 ....................245 463-10500 ....................246 463-10501 .....................246 463-10509 ....................246 463-10510 .....................246 463-10542 .....................246 463-10543 .....................246 463-10544 .....................246 463-10545 .....................246 463-10546 .....................246 463-10552 .....................246 463-10553 .....................246 463-10554 .....................246 463-10555 .....................246 463-10570 .....................246 463-10571 ......................246 463-10572 .....................246 463-10573 .....................246 463-10574 .....................246 463-10575 .....................246 463-10600 ....................247 463-11543 ......................246 463-11544 ......................246 463-11545 ......................246 463-11546 ......................246 463-11553 ......................246 463-11554 ......................247 463-11555 ......................246 463-11572 ......................246 463-12543 .....................246 463-12544 .....................246 463-12545 .....................246 463-12553 .....................246 463-13543 .....................246

487 NUMERICAL INDEX 463-13545 .....................246 463-20201 .....................248 463-20204 ....................248 463-20205 ....................248 463-20207 ....................248 463-20542 ....................248 463-20543 ....................248 463-20544 ....................248 463-20545 ....................248 463-20546 ....................248 463-20551 .....................248 463-20552 ....................248 463-20553 ....................248 463-20554 ....................248 463-20555 ....................248 463-20570 ....................248 463-20571 .....................248 463-20573 ....................248 463-20707 ....................248 463-20752 ....................248 463-20754 ....................248 463-20879 ....................248 463-20946 ....................248 463-20949 ....................248 463-21543 .....................248 463-21544 .....................248 463-21545 .....................248 463-21546 .....................248 463-21553 .....................248 463-21555 .....................248 463-21572 .....................248 463-22543 ....................248 463-22544 ....................248 463-22545 ....................248 463-22553.....................248 463-23543 ....................248 463-23545 ....................248 463-51112 .......................249 463-51602 .....................249 463-51622 .....................249 463-52192 .....................249 463-52692 ....................249 463-53192 .....................249 463-53692 ....................249 463-54192 .....................249 463-71515 ......................249 463-71520 .....................249 463-71525 .....................249 463-71530 .....................249 463-71540 .....................249 463-71550 .....................249 463-71555 .....................249 463-73005 ....................249 463-74196 .....................249 463-77085 ....................249 463-79117 ......................249 463-79560 ....................249 463-79677.....................249 463-79785 .....................249 463-79786 ....................249 463-97225 ....................249 463-97226 ....................249 463-97227.....................249 463-97228 ....................249 463-97720 ....................249 463-97733.....................249 463-97734 ....................249 463-97738 ....................249 463-97739 ....................249 463-97745 .....................249 463-97746 ....................249 463-97747 .....................249 463-97748 ....................249 463-97752.....................249 464-00015 ....................257 464-00030 ...................257 464-00082 ...................262 464-00134 ....................184 464-00135 ....................184 464-00136 ....................184 464-00137 ....................184 464-00138 ....................184 464-00139 ....................184 464-00140 ....................184 464-00141 .....................184 464-00142 ....................184 464-00143 ....................184 464-00144 ....................184 464-00145 ....................184 464-00146 ....................184 464-00208 ...................262 464-00209 ...................262 464-00216 ....................264 464-00310 ....................184 464-00618 ....................245 464-00618* ..................257 464-00619 ....................257 464-00621 ....................257 464-00622 ...................257 464-00623 ...................257 464-00718 ....................257 464-01025 ....................257 464-01091 .....................258 464-01451 .....................258 464-01452 ....................258 464-01618 .....................257 464-02618 ....................257 464-04501 ....................258 464-05905 ...................257 464-10001 .....................258 464-10912 .....................258 464-10913 .....................258 464-92837 ....................184 465-00042 ...................267 465-00144 ....................260 465-00145 ....................260 465-00148 ....................260 465-00149 ....................260 465-00431 ....................259 465-00446 ...................259 465-00454 ...................259 465-00455 ...................259 465-00456 ...................267 465-00458 ...................259 465-00479....................259 465-00506 ...................259 465-00507 ...................259 465-00520 ...................267 465-00522 ....................259 465-00524 ....................267 465-00535 ....................259 465-00546 ...................259 465-00552 ....................259 465-00558 ....................259 465-00563....................259 465-00570 ....................265 465-00573 ....................259 465-00582 ....................259 465-00585....................265 465-00650 ...................259 465-00651 ....................259 465-00652....................259 465-00653 ....................259 465-00654 ...................259 465-00655....................259 465-00656 ...................259 465-00657 ....................259 465-00658 ...................259 465-00659 ...................259 465-00660 ...................259 465-00661 ....................259 465-00662 ...................259 465-00663 ...................259 465-00664 ...................259 465-00665 ...................259 465-00666 ...................259 465-00667 ...................259 465-00668 ...................259 465-00670 ...................261 465-00671 ....................261 465-00690 ...................260 465-00691 ....................260 465-00692 ...................260 465-00693 ...................260 465-00694 ...................260 465-00695 ...................260 465-00696 ...................260 465-00702 ....................259 465-00710 ....................259 465-00994 ...................260 465-01014 .....................262 465-01418 .....................259 465-01450 ....................265 465-03009 ...................259 465-04510 ....................259 465-04512 .....................259 465-04513 .....................259 465-04524 ....................259 465-04530 ....................259 465-04532 ....................259 465-04536 ....................259 465-04645 ...................259 465-04745 ....................259 465-04985 ....................265 465-05008 ...................265 465-05112......................265 465-05200 ...................265 465-05410 ....................265 465-05420 ...................265 465-05922 ....................265 465-06702 ....................261 465-06703 ....................261 465-06911 .....................260 465-07103 .....................265 465-07536 ....................267 465-07601.....................265 465-07602 ....................265 465-07940....................265 465-07948 ....................265 465-07949 ....................265 465-08018 ....................265 465-08019 ....................265 465-08852 ....................265 465-09440 ...................265 465-09470....................265 465-09903 ...................265 465-10760 .....................262 465-10761 ......................262 465-10762 .....................262 465-10763 .....................262 465-10764 .....................262 465-10780 .....................262 465-10781 ......................262 465-10782 .....................262 465-11411 .......................260 465-11455 ......................260 465-11750 ......................262 465-11751 .......................262 465-11752 ......................262 465-11790 ......................262 465-11791 .......................262 465-11792 ......................262 465-30045 ....................259 465-30060 ...................267 465-33031 .....................267 465-33069 ....................267 465-40000 ...................262 465-40001 ....................259 465-40002 ...................259 465-40003 ...................259 465-40004 ...................259 465-40005 ...................259 465-40006 ...................259 465-40007 ...................259 465-40011 .....................262 465-45105 .....................259 465-65202 ....................260 465-65402 ....................260 465-65502 ....................260 465-65602 ....................260 465-65702 ....................260 465-65802 ....................260 465-65902 ....................260 465-70125 .....................259 465-70255 ....................259 465-70280 ....................259 465-70285 ....................259 465-71090 ....................259 465-72212 .....................259 465-72280 ....................259 465-73212 .....................259 465-75010 .....................265 465-75035 ....................265 465-75040 ....................265 465-75045 ....................265 465-75080 ....................265 465-75090 ....................265 465-75115 ......................265 465-75120 .....................265 465-75135 .....................265 465-75160 .....................265 465-75170 .....................265 465-75175 .....................265 465-75180 .....................265 465-75185 .....................265 465-75190 .....................265 465-75205 ....................265 465-75210 .....................265 465-75215 .....................265 465-75225 .....................265 465-75235 .....................265 465-75245.....................265 465-75250 ....................265 465-75295 ....................265 465-75320 ....................265 465-75610 .....................259 465-81080 ....................265 465-81090 ....................265 465-81100 .....................265 465-81200 ....................265 465-81250 .....................265 465-81320 .....................265 465-81400 ....................265 465-86015.....................265 465-86020 ...................265 465-86025 ....................265 465-86030....................265 465-86032 ....................265 465-86033 ....................265 465-86040 ...................265 465-86045....................265 465-86050 ...................265 465-86059 ....................265 465-86060 ...................265 465-86067 ....................265 465-86072 ....................265 465-86077 ....................265 465-86080 ...................265 465-86085 ....................265 465-86090 ...................265

488 NUMERICAL INDEX 465-86100 ....................265 465-86107 .....................265 465-86120 .....................265 465-86125 .....................265 465-86160 ....................265 465-86187 .....................265 465-86225 ....................265 465-86245 ....................265 465-97711 ......................260 465-97755 ....................260 466-00200 ...................263 466-00296 ...................264 466-00525....................263 466-00529 ...................263 466-00625 ...................263 466-00660 ...................263 466-00675....................263 466-00685 ...................263 466-00690 ...................263 466-00691 ....................263 466-00692 ...................263 466-00693 ...................263 466-00800 ...................263 466-00850 ...................262 466-00851 ....................262 466-00860 ...................263 466-00890 ...................263 466-00918 ....................262 466-01050 ....................264 466-01066 ....................264 466-01533 .....................264 466-01538 .....................264 466-01543 ....................264 466-01850 ....................263 466-01870 ....................264 466-03000 ...................263 466-04000 ...................264 466-05000 ...................264 466-05311 .....................262 466-06190 ....................263 466-07910 ....................264 466-08860 ...................264 466-50910 ....................264 466-70001 ....................266 466-70002....................266 466-70004 ...................266 466-70010 ....................266 466-70012 .....................266 466-70013 .....................266 466-70375 ....................266 466-70380 ....................266 466-70390 ....................266 466-70700 ....................266 466-70701 .....................266 466-76000 ...................263 466-96900 ...................263 466-96901 ....................263 467-00218 .....................257 467-00220 ....................257 467-00916 ....................257 468-00006 ...................257 468-00009 ...................257 468-00010 ....................257 468-00050 ...................226 468-00075 ...................255 468-00085 ...................255 468-00100 ....................260 468-00101 .....................267 468-00102 ....................252 468-00103 ....................248 468-00105 ....................255 468-00107 ....................252 468-00145 ....................255 468-00149 ....................260 468-00150 ....................267 468-00151 .....................260 468-00185 ....................255 468-00201 ....................257 468-00202 ...................257 468-00203 ...................257 468-00207 ...................23 468-00207 ...................252 468-00215 ....................255 468-00216 ....................257 468-00307....................23 468-00315 ....................255 468-00330 ...................253 468-00331 ....................253 468-00341 ....................253 468-00346 ...................253 468-00347 ....................253 468-00348 ...................253 468-00349 ...................253 468-00350 ...................253 468-00356....................253 468-00370....................254 468-00371.....................254 468-00372 ....................254 468-00373 ....................254 468-00381 ....................254 468-00382 ....................254 468-00383 ....................254 468-00389 ...................254 468-00390 ...................254 468-00391 ....................254 468-00392 ....................254 468-00393 ....................254 468-00394 ...................254 468-00395....................254 468-00396 ...................254 468-00397 ....................254 468-00399 ...................256 468-00400 ...................256 468-00401 ....................244 468-00401 ....................256 468-00402 ...................256 468-00415 ....................255 468-00462 ...................248 468-00556 ...................256 468-00580 ...................267 468-00607 ...................23 468-00632....................252 468-00634 ...................267 468-00635 ...................227 468-00650 ...................227 468-00660 ...................252 468-00680 ...................227 468-00686 ...................253 468-00687 ...................253 468-00688 ...................253 468-00690 ...................227 468-00765 ....................248 468-00798....................256 468-00808 ...................254 468-01000 ....................255 468-01001 .....................226 468-01032 ....................253 468-01033.....................253 468-01034 ....................253 468-01035 ....................253 468-01037 .....................253 468-01038 ....................253 468-01039 ....................253 468-01120 .....................416 468-01335 .....................253 468-01345.....................253 468-01370 .....................253 468-01390 ....................253 468-01391 .....................254 468-01392 .....................254 468-01393 .....................254 468-01462 ....................248 468-02222 ....................252 468-02462 ....................248 468-04191 .....................252 468-04361 ....................256 468-05005 ...................252 468-05952 ....................248 468-05953 ....................248 468-05954 ....................248 468-06116 .....................256 468-06300 ...................227 468-06541 ....................252 468-07607 ....................256 468-08007 ...................260 468-08500 ...................252 468-09000 ...................226 468-09002 ...................226 468-10004 ....................254 468-10010 .....................253 468-10012 .....................253 468-10013 .....................254 468-10015 .....................254 468-10017 .....................253 468-10019 .....................253 468-10039 ....................254 468-10046 ....................254 468-10054 ....................254 468-10060 ....................254 468-10100 .....................23 468-10117 ......................254 468-11700 .....................254 468-12222 .....................252 468-13500 .....................254 468-13501 ......................254 468-13510 ......................254 468-13511 .......................254 468-13520 .....................254 468-13521 ......................254 468-13530 .....................254 468-13531 ......................254 468-17490 .....................240 468-17491 ......................240 468-17492 .....................23 468-17492 .....................240 468-17493 .....................240 468-17592 .....................240 468-17593 .....................240 468-17692 .....................240 468-17792 .....................240 468-20055 ....................226 468-20495 ....................226 468-20595 ....................226 468-20695 ....................23 468-20795 ....................226 468-20995 ....................226 468-26541 .....................23 468-30007 ....................254 468-30010 ....................254 468-36541 .....................252 468-40007 ...................254 468-40010 ....................254 468-43607 ....................23 468-46541 ....................252 468-59019 ....................23 468-59021.....................23 468-59023 ....................226 468-59765 ....................244 468-62410 ....................253 468-62411......................253 468-62412 .....................253 468-62413 .....................253 468-74920 ....................226 468-74921 .....................226 468-90597 ....................254 468-90599 ...................254 468-95911 .....................254 468-99393 ....................244 469-00001 ....................270 469-00002 ...................270 469-00003 ...................270 469-00004 ...................270 469-00005 ...................270 469-00011 .....................270 469-00012 ....................270 469-00014 ....................268 469-00015 ....................229 469-00018 ....................250 469-00020 ...................229 469-00021 ....................235 469-00024 ...................270 469-00031 ....................229 469-00035 ...................229 469-00040 ...................268 469-00044 ...................234 469-00045 ...................230 469-00065 ...................229 469-00081 ....................270 469-00101 .....................241 469-00123 ....................269 469-00131 .....................269 469-00132 ....................269 469-00133 ....................269 469-00134 ....................269 469-00208 ...................227 469-00240 ...................232 469-00241 ....................232 469-00312 ....................232 469-00416 ....................231 469-00443 ...................258 469-00490 ...................232 469-00496 ...................223 469-00542 ...................231 469-00543 ...................231 469-00545 ...................231 469-00567....................270 469-00572 ....................231 469-00574 ....................231 469-00580 ...................251 469-00607 ...................234 469-00609 ...................271 469-00610 ....................269 469-00612 ....................234 469-00619 ....................267 469-00625 ...................269 469-00630 ...................269 469-00631 ....................267 469-00632 ...................269 469-00633 ...................269 469-00650 ...................227 469-00673 ....................234 469-00680 ...................267 469-00770....................230 469-00771 ....................230 469-00772 ....................230 469-00773 ....................230 469-00850 ...................268 469-00900 ...................217 469-00906 ...................217 469-00917 ....................232 469-00919 ....................232 469-00925 ...................230 469-00950 ...................229 469-00951 ....................229 469-00992 ...................268 469-01010 .....................229 469-01030 ....................229 469-01031 .....................229 469-01040 ....................229 469-01050 ....................229

489 NUMERICAL INDEX 469-01060 ....................229 469-01070 ....................229 469-01077.....................229 469-01080 ....................229 469-01090 ....................229 469-01091 .....................229 469-01092 ....................229 469-01093 ....................229 469-01094 ....................229 469-01095 ....................229 469-01096 ....................229 469-01097 ....................229 469-01098 ....................229 469-01100 .....................229 469-01110 ......................229 469-01115 ......................271 469-01124 .....................268 469-01130 .....................229 469-01195 .....................223 469-01312 .....................232 469-01604 ....................223 469-01606 ....................223 469-01607 ....................223 469-01610 .....................267 469-01638 ....................270 469-01710 .....................267 469-01810 .....................267 469-01820 ....................250 469-01910 .....................267 469-01925.....................230 469-02020 ...................226 469-02040 ...................229 469-02045 ...................229 469-02311 ..................... 162 469-02312 ..................... 162 469-02570 ....................248 469-02572 ....................248 469-02573 ....................248 469-02925 ....................230 469-03200 ...................222 469-03232 ....................235 469-03333 ....................268 469-03925 ....................232 469-04065 ...................236 469-04700 ...................235 469-05010 ....................236 469-05112 .....................233 469-05262 ....................271 469-05410 ....................268 469-05540 ...................235 469-05565 ....................235 469-05700 ...................251 469-05720 ....................251 469-06208 ...................221 469-06210 ....................221 469-06211 .....................221 469-06213.....................221 469-06430 ...................225 469-06431 ....................225 469-06432 ....................225 469-06433 ....................225 469-06434 ...................225 469-06460 ...................225 469-06465 ...................225 469-06468 ...................225 469-06900 ...................267 469-06950 ...................267 469-07000 ...................229 469-07020 ...................229 469-07020 ...................232 469-07100 ....................233 469-07300 ...................233 469-08200 ...................236 469-08288 ....................234 469-08909 ...................267 469-08910 ....................235 469-08910 ....................268 469-09400 ...................223 469-09401 ....................223 469-09405 ...................223 469-10110 ......................236 469-10215 ......................234 469-10315 ......................234 469-11115 .......................271 469-11610 ......................268 469-11710 ......................268 469-11810 ......................268 469-11910 ......................268 469-12604 ....................223 469-15407 .....................270 469-15415 ......................234 469-15535 .....................234 469-15720 .....................251 469-17107 ......................240 469-17140 .....................243 469-17141.......................243 469-17142 ......................243 469-17143 ......................243 469-17144......................243 469-17145 ......................243 469-17198 ......................240 469-17205 .....................240 469-17206 .....................240 469-17207 .....................240 469-17208 .....................240 469-17209 .....................240 469-17210 ......................240 469-17211 .......................240 469-17212 ......................240 469-17213 ......................240 469-17214 ......................240 469-17215 ......................240 469-17216 ......................240 469-17218 ......................228 469-17221 ......................240 469-17222 .....................240 469-17223 .....................240 469-17224 .....................240 469-17226 .....................240 469-17227 .....................240 469-17228 .....................240 469-17235 .....................240 469-17236 .....................240 469-17245 .....................228 469-17246 .....................228 469-17272 .....................240 469-17275 .....................240 469-17296 .....................240 469-17311 .......................240 469-17316 ......................240 469-17317 ......................240 469-17320 .....................240 469-17321 ......................240 469-17323 .....................240 469-17392 .....................228 469-17393 .....................228 469-17395 .....................228 469-17397 .....................228 469-17398 .....................228 469-17420 .....................240 469-17438 .....................242 469-17439 .....................242 469-17440 .....................243 469-17444 .....................243 469-17445 .....................243 469-17539 .....................228 469-17590 .....................228 469-17591 ......................228 469-17596 .....................228 469-20025 ....................229 469-20078 ....................221 469-20130 ....................229 469-20140 ....................234 469-20144 ....................235 469-20178 .....................221 469-20250 ....................235 469-20279 ....................219 469-20280 ....................219 469-20281 .....................219 469-20282 ....................219 469-20283 ....................219 469-20284 ....................219 469-20798 ....................230 469-20898 ....................230 469-21010 .....................229 469-21020 ....................229 469-21057 .....................220 469-21298 .....................220 469-22011 .....................251 469-22012 .....................251 469-22481 .....................227 469-22482 ....................227 469-23430 ....................270 469-25078 ....................226 469-25080....................226 469-25082 ....................226 469-25083 ....................226 469-25415 .....................234 469-25535 ....................234 469-29500 ...................241 469-29500 ...................241 469-30000 ...................233 469-32011 ......................251 469-32012 .....................251 469-32855 ....................271 469-32856 ....................271 469-34000 ...................226 469-35415 .....................234 469-35934 ....................251 469-37100.....................222 469-43041 ....................242 469-43042 ....................242 469-43046 ...................242 469-43047 ....................242 469-43048 ...................242 469-43049 ...................242 469-43050 ...................242 469-43052 ....................242 469-47100 ....................222 469-47102 .....................225 469-50816 ....................218 469-51632 .....................235 469-51812 ......................215 469-52000 ...................271 469-53707 ....................241 469-53718 .....................241 469-53723.....................241 469-57001 .....................225 469-57005 ....................225 469-57009 ....................225 469-57011 ......................225 469-57012 .....................225 469-57101......................222 469-62072 ....................221 469-62104 ....................221 469-62312 .....................221 469-64640 ...................225 469-67100 ....................222 469-70360 ....................266 469-90660 ...................229 469-90661 ....................229 469-90662 ...................229 469-91322 .....................227 471-31432 ...................... 182 471-31433 ...................... 182 471-80001 .....................261 471-80002 ....................261 471-80003 ....................261 471-80004 ....................261 471-80005 ....................261 471-80006 ....................261 471-80009 ....................261 471-80011 ......................261 471-80014 .....................261 471-80015 .....................261 471-80016 .....................261 471-80019 .....................261 471-80020 ....................261 471-80021 .....................261 471-80022 .....................261 471-80023 .....................261 471-80024 .....................261 471-80025 .....................261 471-80112 ......................261 471-80115 ......................261 471-80116 ......................261 471-80120 .....................261 471-80125 ......................261 471-80129 ......................261 471-80133 ......................261 471-80135 ......................261 471-80139 ......................261 471-80145......................261 471-80149 .....................261 471-80151 ......................261 471-80157 ......................261 471-80163 ......................261 471-80169 .....................261 471-80215 ......................261 471-80225 .....................261 471-80449 ....................261 471-80451......................261 471-80457 .....................261 471-80463 .....................261 471-80469 ....................261 472-31710 ...................... 189 472-31713 ...................... 189 472-31810 ...................... 189 473-00005 ................... 181 473-00010 ....................177 473-00011 .....................177 473-00013.....................177 473-00015 .................... 179 473-00020 ................... 179 473-00038 .................... 181 473-00103 .....................180 473-00106 ....................180 473-00110 .....................180 473-00114 .....................180 473-00207 ....................177 473-00500 ...................177 473-00501 ....................177 473-01104 ..................... 178 473-01106 ..................... 178 473-01107 ...................... 178 473-01110 ...................... 178 473-01113 ....................... 178 473-01118 ....................... 178 473-01230 ..................... 178 473-01500 .................... 176 473-01502 ..................... 176 473-01504 ..................... 176 473-01505 ..................... 176 473-01506 ..................... 176 473-01509 ..................... 176 473-01510 ...................... 176 473-01516 ...................... 176 473-01518 ...................... 176 473-02102 ..................... 178 473-02103 ..................... 178

490 NUMERICAL INDEX 473-02106 ..................... 178 473-02107 ..................... 178 473-02501 ..................... 176 473-02505 .................... 176 473-02510 ..................... 176 473-02511 ...................... 176 473-02513 ..................... 176 473-03102 ..................... 178 473-03103 ..................... 178 473-03104 ..................... 178 473-03106 ..................... 178 473-04103 ..................... 178 473-05102 ..................... 178 473-06813 ..................... 178 473-12913 ......................180 473-12914 ......................180 473-12915 ......................180 473-12916 ......................180 473-12917 ......................180 473-12919 ......................180 473-12920 .....................180 473-12921 ......................180 473-12923 ......................180 473-12930 .....................180 473-12942 ..................... 179 473-22181 ...................... 181 473-32181 ...................... 181 473-36016 ..................... 179 473-36017 ..................... 179 473-42561 ..................... 181 475-00891.....................286 475-00892 ....................286 475-00893 ....................286 475-00894 ....................286 475-00895 ....................286 475-00896 ....................285 475-01892 .....................285 475-01893 .....................285 475-01894 .....................285 475-01895 .....................285 475-01896 .....................285 475-01897 .....................285 475-01898 .....................285 475-12532 ......................184 475-13011 .......................184 475-13018 ......................184 475-13019 ......................184 475-13021 ......................184 475-13022 .....................184 475-13026 .....................184 475-13027 .....................184 475-13028 .....................184 475-13029 .....................184 475-13030 .....................184 475-13031 ......................184 475-13032 .....................184 475-13033 .....................184 475-13034 .....................184 475-15090 .....................183 475-15103 ......................183 475-18001 ......................184 475-30280 ....................183 475-30281 .....................183 475-82515 .....................184 475-89001 .....................285 475-89003 ....................285 475-89004 ....................285 475-89103 .....................286 476-00001 ....................277 476-00002 ...................277 476-00003 ...................277 476-00135 .....................275 476-00165.....................275 476-00185 .....................275 476-00250 ....................275 476-00255 ....................275 476-00276 ....................274 476-00290 ...................274 476-01046 ....................275 476-01941 .....................277 476-02555 ....................281 476-03238 ....................274 476-03502 ....................276 476-05600 ...................277 476-05602 ....................277 476-05603 ....................277 476-05604....................277 476-05900 ...................275 476-05988 ....................275 476-07125 .....................275 476-07212 .....................277 476-07213 .....................277 476-07215 .....................277 476-07226 ....................277 476-07229 ....................277 476-07230 ....................277 476-07233.....................275 476-07233.....................281 476-07248 ....................277 476-07262 ....................275 476-07263 ....................277 476-07275 .....................275 476-07277 .....................277 476-07278 ....................277 476-07285 ....................275 476-07290 ....................277 476-07291 .....................277 476-08500 ...................276 476-08501 .....................276 476-08860 ....................276 476-08900 ...................276 476-10100 .....................272 476-10105 ......................272 476-10110 ......................272 476-10115 .......................272 476-10120 ......................272 476-10125 ......................272 476-10130 ......................272 476-10135 ......................272 476-10140 .....................272 476-10145 ......................272 476-10150 ......................272 476-10155 ......................272 476-10160 .....................272 476-10165 ......................272 476-10185 ......................272 476-10240 .....................281 476-10250 .....................281 476-10255 .....................281 476-10480 .....................272 476-10500.....................274 476-11048 ......................272 476-11135 .......................272 476-11148 .......................272 476-11155 .......................272 476-11185 .......................272 476-15600 .....................277 476-17275 ......................275 476-17285......................275 476-25600 ....................277 476-27275 .....................275 476-30377 .....................274 476-32380 ....................274 476-35020 ....................276 476-35021 .....................276 476-35600 ....................277 476-37285 .....................275 476-45600 ....................277 477-00001 ....................287 477-00002 ....................287 477-00003 ....................287 477-00004 ...................287 477-00005....................287 477-00008 ...................287 477-00009 ...................287 477-00010 ....................287 477-00011 .....................287 477-00012 .....................287 477-00014 ....................287 477-00015 .....................287 477-00020 ....................287 477-00033 ....................287 477-00060 ...................285 477-00066....................287 477-00099 ....................287 477-00111 ......................287 477-00112 ......................287 477-00113 ......................287 477-00115 ......................287 477-00118 ......................287 477-00144 .....................287 477-00404....................284 477-00506 ....................284 477-00516 .....................284 477-00577 ....................283 477-00587 ....................283 477-00604....................285 477-01111 ........................287 477-01112 .......................287 477-06175 .....................284 477-07480 ....................288 477-10001 ......................283 477-10004 .....................283 477-10312 ......................282 477-11111 .........................287 477-11239 ......................282 477-11240 ......................282 477-11241 .......................282 477-11242 ......................282 477-11612 .......................282 477-11623 ......................286 477-11624 ......................286 477-34020 ....................288 477-35020 ....................288 477-47732 .....................286 477-48216 .....................282 477-49515 .....................288 477-72603 .....................284 477-72609.....................284 477-73892 .....................288 477-73893 .....................288 477-76023 .....................284 477-76029 .....................284 477-84820 ....................73 478-00001 ....................278 478-00305 ....................278 478-00315 .....................278 478-00322 ....................281 478-00325 ....................278 478-00326 ....................281 478-00328 ....................281 478-00335 ....................278 478-00340....................278 478-00345 ....................280 478-00346 ....................280 478-00360....................286 478-00377 ....................281 478-00707 ....................278 478-00820....................285 478-01330 .....................278 478-01335 .....................278 478-01340 .....................278 478-01345 .....................280 478-01346 .....................280 478-01350 .....................278 478-01351 ......................278 478-01352 .....................278 478-02975 ....................280 478-02985 ....................278 478-02995 ....................278 478-03300 ....................278 478-03301 .....................278 478-03330 ....................278 478-03370 ....................278 478-04500 ...................278 478-04501.....................278 478-04660 ...................281 478-05265 ....................278 478-05451 .....................278 478-06171 ......................279 478-06172 .....................279 478-06173 .....................279 478-06174 .....................279 478-06175 .....................279 478-06176 .....................279 478-06190 ....................281 478-06293 ....................278 478-06294 ....................281 478-06585 ....................278 478-06999 ....................279 478-08914 .....................279 478-10013 ......................281 478-16174 ......................279 478-16294 .....................281 478-16999 .....................279 478-32072 .....................280 479-02130 .....................208 479-02220 ....................208 479-02240 ....................208 479-02250 ....................208 479-02260 ....................208 479-36001 .....................206 479-36002 ....................206 479-36003 ....................205 479-36004 ....................205 479-36005 ....................206 479-36006 ....................206 479-36011 ......................206 479-36013 .....................206 479-36014 .....................209 479-36015 .....................206 479-36016 .....................207 479-36021 .....................206 479-36052 ....................207 479-36078 ....................207 479-36082 ....................207 479-36111 .......................209 479-36112 ......................209 479-36115 ...................... 189 479-46001 ....................205 479-46002....................205 479-46005 ...................205 479-46006 ...................205 479-46010 ....................205 479-46011 .....................205 481-00010 ..................... 311 481-00072 .................... 311 481-00075 .................... 311 481-00206 ....................312 481-00330 ....................312 481-00450 ....................310 481-00550 ....................310 481-01300 .....................309 481-01452 .....................315 481-01500 .....................309 481-01600 .....................309 481-09682 ....................313 481-09783 .....................314 481-09984 ....................314 481-10201 ......................315

491 NUMERICAL INDEX 481-64503 .....................312 481-64504 ....................312 481-80900 ....................310 481-92811 ......................313 481-95218 ......................313 482-25411 ......................316 482-25491 .....................316 482-25649 ....................316 482-26460 ....................316 482-26462 ....................316 483-00525 ....................310 483-07503 ....................319 483-07817 .....................319 483-08002 ...................318 483-08005 ...................318 483-08027 ....................318 483-08065....................318 483-09499 ...................319 483-09945 ....................319 483-10104 .....................319 483-10908 ....................319 483-11327 ......................319 483-11935 ......................319 483-12103 ......................319 483-21982 .....................317 483-24433 ....................317 483-24486 ....................317 483-25403 ....................317 483-25406 ....................317 483-25433 ....................317 483-29821 .....................317 483-29827 ....................317 483-40014 ....................316 483-40091 ....................316 483-40110 .....................316 483-40132 .....................316 483-40301 ....................317 483-40401 ....................317 483-40800 ...................317 483-40801 ....................317 483-40806 ...................317 483-41821 ......................319 483-53531 .....................318 483-53921 .....................318 483-99409 ...................316 483-99409 ...................316 484-00006 ...................343 484-00012 ....................343 484-00060 ...................342 484-00112 .....................343 484-00224....................345 484-00300 ...................342 484-00576 ....................345 484-03200 ...................345 484-07500 ...................345 484-10100 .....................342 484-10101 ......................342 484-10102 .....................342 484-10200 ....................342 484-10201 .....................342 484-10300 ....................342 484-10301 .....................342 484-10400 ....................342 484-10720 .....................343 484-11360 .....................343 484-13360 .....................343 484-16001 .....................342 484-17026 .....................342 484-17127 ......................342 484-20576 ....................342 484-20624 ....................342 484-21576 .....................345 484-21624 .....................345 484-22576 ....................342 484-27026 ....................342 484-28408 ....................341 484-30022 ....................345 484-30224 ....................342 484-30225 ....................342 484-30360 ....................343 484-31010 .....................345 484-31020.....................345 484-31230 .....................341 484-31234 .....................341 484-31360 .....................342 484-32224 ....................342 484-32230 ....................341 484-32252 ....................341 484-32360 ....................345 484-33224 ....................345 484-35320 ....................345 484-37026 ....................342 484-40828....................341 484-40848 ...................341 484-41010 .....................345 484-41020 ....................345 484-42010 ....................345 484-47026 ....................345 484-50610 ....................341 484-50615.....................341 484-51500 ....................345 484-51501 .....................345 484-52312 .....................341 484-61500 ....................345 484-61501 .....................345 484-67026 ....................342 484-71500.....................345 484-71501 ......................345 484-77026 ....................342 486-00011 .....................347 486-00133 ....................346 486-00222 ....................347 486-00233 ....................346 486-07129 .....................346 486-11000 .....................346 486-11006 .....................346 486-13733 .....................344 486-31280 .....................344 486-31281 ......................343 486-31282 .....................343 486-31283 .....................344 486-31284 .....................344 486-31285 .....................343 486-33580 ....................346 486-33581 .....................346 486-33584 ....................346 486-48301 ....................347 486-51480 ....................346 486-71510 ......................347 486-71511 .......................347 486-71512 ......................347 486-75011 ......................340 486-75012 .....................340 491-00014 .....................109 491-00016 .....................109 491-00027 ....................109 491-00033 ....................108 491-00038 ....................109 491-00052 ....................109 491-00055 ....................109 491-00056 ....................109 491-00062 ....................109 491-00064 ....................109 491-00065 ....................109 491-00066 ....................109 491-00101 ......................204 491-00149 .....................109 491-00304 ....................108 491-00306 ....................108 491-00426 .................... 114 491-00500 ....................110 491-00600 ....................110 491-00654 ....................109 491-00708 ....................108 491-00709 ....................108 491-00716 .....................109 491-00881 .....................108 491-00888 ....................108 491-00889 ....................108 491-00891 .....................108 491-00892 ....................108 491-00896 ....................108 491-00897 ....................108 491-00978 ....................108 491-00995 ....................108 491-01304 .....................108 491-01306 .....................108 491-01339......................96 491-01573 ......................96 491-01896 .....................108 491-01897 .....................108 491-01978......................108 491-01995 .....................108 491-02100 ..................... 113 491-02101 ...................... 113 491-02111 ....................... 113 491-02202.....................108 491-02203 .....................108 491-02204 ....................108 491-02301 ..................... 107 491-02303 .....................108 491-02431 ......................109 491-02445 .....................109 491-02620 .................... 113 491-02622 ..................... 113 491-02666 ....................96 491-02906 .................... 107 491-02919 ..................... 107 491-02928 ..................... 107 491-02939 ..................... 107 491-03002 ....................109 491-03083.....................110 491-03087 .....................110 491-03096 ....................110 491-03097.....................110 491-03098 ....................110 491-03099 ....................110 491-03101 ......................110 491-03103 .....................110 491-03104 .....................110 491-03113 ......................110 491-03271 ......................110 491-03279 .....................110 491-04009 ....................109 491-04012 .....................109 491-04013 .....................109 491-04020 ....................109 491-04021 .....................109 491-06012 .....................109 491-06014 .....................109 491-06020 ....................109 491-06021 .....................109 491-06023 ....................109 491-06024 ....................109 491-06025 ....................109 491-06026 ....................109 491-06115 ......................110 491-09013 .....................109 491-09014 .....................109 491-11001 .......................97 491-11002 ......................97 491-11003 ......................97 491-11004 ......................97 491-11005 ......................97 491-11006 ......................97 491-11007 ......................97 491-11008 ......................97 491-11009 ......................97 491-11010 .......................97 491-11011 ........................97 491-11012 .......................97 491-11013 .......................97 491-11014 .......................97 491-11015 .......................97 491-11016 .......................97 491-11017 .......................98 491-11018 .......................98 491-11020 ......................98 491-11021 .......................98 491-11022.......................98 491-11023.......................98 491-11024 ......................98 491-11025.......................98 491-11026 ......................98 491-11027 .......................98 491-11028 ......................98 491-11029 ......................98 491-11030 ......................98 491-11031 .......................98 491-11032 .......................98 491-11033 .......................98 491-11034 ......................99 491-11035 .......................99 491-11036 ......................99 491-11037 .......................99 491-11038 ......................99 491-11039 ......................99 491-11040 ......................99 491-11041 .......................99 491-11042 ......................99 491-11133 ........................ 107 491-19010 ...................... 113 491-23010 ..................... 107 491-32111........................95 491-32120 ......................95 491-32121 .......................95 491-32124 ......................95 492-00502....................100 492-01240.....................100 492-01250 .....................100 492-01260 ....................100 492-02278 .................... 111 492-04200 ...................100 492-04240 ....................100 492-04300 ...................100 492-04400 ...................100 492-05021 .....................100 492-05022 ....................100 492-05023 ....................100 492-05024 ....................100 492-05025 ....................100 492-06247 .................... 114 492-06346 .................... 114 492-10134 ...................... 111 492-10150...................... 111 492-10151 ....................... 111 492-10158 ...................... 111 492-10159 ...................... 111 492-10180 ..................... 111 492-10196...................... 111 492-10340 ..................... 111 492-10580 ..................... 111 492-10590 ..................... 111 492-10780 ..................... 111 492-14000 .................... 111 492-14916 ...................... 111 492-15000 .................... 111 492-30165 .....................198 492-30171 ......................105 492-30254 ....................105

492 NUMERICAL INDEX 492-30649 ....................105 493-00801 .................... 114 493-30100 .................... 101 493-30120 ..................... 101 493-30125 ..................... 101 493-31210 ...................... 101 493-73602 .................... 102 493-91420..................... 112 495-16000 ....................91 495-16001 .....................91 495-16002.....................91 495-16003 .....................91 495-16004 ....................91 495-16005 ....................91 495-16006 ....................91 495-16007 .....................91 495-16008 ....................91 495-16009 ....................91 495-16014 .....................91 495-16015 ......................91 495-16016 .....................91 495-16017 ......................91 495-30908 ....................91 495-30909....................91 495-30910 ....................91 495-30911......................91 495-30913 .....................91 495-30914 .....................91 495-30918 .....................91 495-30919 .....................91 497-00005 ...................470 497-00055 ....................470 497-11800 ......................470 497-11801 .......................470 497-84405 ....................470 497-84406 ....................470 499-10130 ..................... 111 499-10150 ..................... 111 499-10171 ...................... 111 499-10180 ..................... 111 499-10200 .................... 111 499-10210 ..................... 111 499-10211 ...................... 111 499-10340 .................... 111 499-10341...................... 111 499-10580 .................... 111 499-10581 ..................... 111 499-10660 .................... 111 499-11171 ....................... 111 500-00096 ...................425 500-01602 ....................426 501-00201 .....................424 501-00202 ....................424 501-00203 ....................424 501-00204 ....................424 501-00205 ....................424 501-00508 ....................410 501-00511 ......................421 501-00532.....................410 501-14008 .....................431 501-14032 ......................431 501-14511 .......................431 501-14512 .......................431 501-14513 .......................431 501-14514 ......................431 501-14515 .......................431 501-50300 ....................425 501-51300 .....................425 501-90008 ....................402 501-90018 .....................402 501-90032 ....................402 501-90132 .....................402 502-16005.....................408 502-16015 ......................408 502-26001 ....................426 502-26005 ....................426 502-26011......................426 502-26015 .....................426 502-40541.....................425 502-51388 .....................425 503-16005.....................408 504-00005 ................... 162 504-00055 ................... 162 504-00132 ....................410 504-00275 .................... 162 504-00507 ...................421 504-01132 .....................410 504-01248 .................... 162 504-01832 ..................... 162 504-02424 .................... 162 504-09600 ...................425 504-09601 ....................425 504-14100 .....................431 504-14104 .....................431 504-14111 .......................431 504-14228 .....................431 504-90005 ...................402 504-90011 .....................402 504-90016 ....................402 504-90032 ...................402 505-00071 ....................424 505-00170 ....................424 505-00171 .....................424 505-00176 ....................425 505-00490 ...................421 505-00491 ....................421 505-00508 ...................421 505-00516 ....................410 505-00532 ....................410 505-05320 ....................410 505-14100 .....................431 505-14102 ......................431 505-90032 ....................402 506-16005 ....................408 506-26005 ...................426 506-26015.....................426 507-00063 ....................424 507-00501 ....................410 507-00550 ....................421 515-00555 .....................68 515-02400 ....................68 516-00305 ....................466 516-00405 ....................466 516-00492 ....................466 516-00493 ....................466 516-00494 ....................466 516-00495 ....................466 516-00496 ....................466 516-00505 ....................466 516-00605 ....................466 516-01305 .....................466 516-01405 .....................466 516-04914 .....................466 517-00039 .....................452 517-00055 .....................452 517-00100 .....................452 517-11033 .......................452 518-00502 ....................407 518-29140 .....................407 518-29150 ......................407 518-90030 ....................406 518-90060 ....................405 518-90160 .....................406 523-18101 .......................427 523-18126 ......................427 523-18146 ......................427 523-18160 ......................427 523-18161 .......................427 523-18206 .....................427 523-18212 ......................427 523-18220 .....................427 523-18222 ......................427 523-18262 .....................427 523-18389 .....................427 523-18412 ......................427 523-18512 ......................427 523-18712 ......................427 523-18758 ......................427 523-18856 .....................427 523-18858 .....................427 523-18860 .....................427 523-18912 ......................427 523-18914 ......................427 523-18915 ......................427 523-18960 .....................427 525-10136 ......................423 525-10137 ......................423 525-10138 ......................423 525-10139 ......................423 525-11345 ......................423 525-11346 ......................423 525-11347 ......................423 525-11348 ......................423 525-11349 ......................423 525-11350 ......................423 525-11351 .......................423 525-11352 ......................423 525-15116 .......................426 525-15181 .......................426 525-15186 ......................426 525-15188 ......................426 525-15213 ......................426 525-15216 ......................426 525-15286 .....................426 525-15288 .....................426 525-15413 ......................426 525-15418 ......................426 525-15914 ......................426 526-10046 ....................423 526-10050 ....................423 526-10052 .....................423 526-10056 .....................423 526-10060 ....................423 526-11115 ........................424 526-11116........................424 526-11117 ........................424 526-11118 ........................424 526-11119........................424 526-11120 .......................424 526-11121 ........................424 526-11122 .......................424 526-11123 .......................424 526-11124 .......................424 526-11125 .......................424 526-11126 .......................424 526-11127 .......................424 526-11128 .......................424 526-11129 .......................424 526-11130 .......................424 526-11131 ........................424 526-11132 .......................424 526-11133 .......................424 526-11134 .......................424 526-11135 .......................424 526-11136 .......................424 526-11137 .......................424 526-11138 .......................424 526-11139 .......................424 526-11140 ......................424 526-11141 ........................424 526-12046 .....................423 526-12050 .....................423 526-12052 .....................423 526-12056 .....................423 526-12060 .....................423 526-12146 ......................423 526-12150 ......................423 526-12152 ......................423 526-12156 ......................423 526-12160 ......................423 526-15283 .....................427 526-15293 .....................427 526-18001......................427 526-18002 .....................427 526-18003 .....................427 526-51618 ......................426 526-55600 ....................468 526-55610 .....................426 526-55630 ....................426 526-55672 .....................426 531-60070 .....................437 531-60090 ....................437 531-60130 .....................437 531-60150 .....................437 531-60170 ......................437 531-60300 ....................437 531-60310......................437 531-60570 .....................437 531-70030 .....................437 531-71050 ......................437 531-75150 ......................437 531-75170 ......................437 531-75190 ......................437 531-75200 .....................437 531-75220 .....................437 531-75310 ......................437 531-75330 ......................437 531-75370 ......................437 531-75440 .....................437 531-95001 .....................472 531-95002 .....................472 532-06020 ....................424 532-06021 .....................424 532-07460 ....................442 532-74601 .....................442 532-74602 .....................442 533-00003 ....................450 533-00010 ....................450 533-00012 .....................450 533-00045 ....................450 533-01120 ......................450 533-01140 .....................450 533-01141 .......................450 533-01180 ......................450 533-01181 .......................450 533-01182 ......................450 533-01381 ......................450 533-01516 ......................450 533-01716 ......................450 533-01732 .....................450 534-80001 ....................450 534-80005 ...................450 534-80011 .....................450 534-80015 .....................450 534-80024 ....................450 534-80036 ....................450 534-80037 ....................450 534-80057 ....................462 534-80115 ......................450 534-80136 .....................450 534-80137 .....................450 534-81115 .......................450 535-00150.....................375 535-03811 ......................467 535-06020 ....................467 535-08014 .....................448 535-08034 ....................448 535-08044 ....................448 535-08075 ....................448 535-08085 ....................448

493 NUMERICAL INDEX 535-13533 ......................448 535-14165 ......................449 535-14170 ......................449 535-14171 .......................449 535-14172 ......................449 535-14173 ......................449 535-14174 ......................448 535-14175 ......................449 535-14176 ......................449 535-14177 ......................448 535-14178 ......................448 535-14179 ......................449 535-14182 ......................449 535-14185 ......................448 535-15322 ......................448 535-15443 .....................448 535-15463 .....................448 535-15533 ......................448 535-15543 ......................448 535-15563 ......................448 535-21072 .....................448 535-21073 .....................448 535-21074......................448 535-21076 .....................448 535-35070 ....................448 535-35240.....................448 535-35250 .....................448 535-70179 .....................448 536-00001 ....................441 536-00101 .....................441 536-01121.......................441 536-01122 ......................441 536-02040 ...................441 536-02890 ....................441 536-02910.....................441 536-06500 ...................441 537-00001.....................442 537-00003 ....................449 537-00004....................442 537-00027 ....................443 537-00028 ....................443 537-00045 ....................438 537-00083 ....................442 537-00190 .....................417 537-00199 .....................417 537-00353 .....................442 537-00575 .....................443 537-00585 ....................443 537-02240 ....................443 537-02241 .....................443 537-05246 ....................438 537-06010 .....................438 537-06012 .....................438 537-06014 .....................438 537-06022 ....................438 537-10010 ......................440 537-10011 .......................440 537-10012 ......................440 537-10013 ......................440 537-10017 ......................440 537-10021 ......................440 537-10565 .....................443 537-15224 ......................443 537-15225 ......................443 537-15226 ......................443 537-15227 ......................443 537-15230 ......................443 537-15232 ......................443 537-17276 ......................438 537-17277 ......................438 537-19012 ......................449 537-36560.....................443 537-72967 .....................438 537-75310 ......................437 537-90002 ....................440 537-90003 ....................440 537-90005 ....................440 537-90006 ....................440 537-90009 ....................440 537-90019 .....................440 537-90035 ....................440 537-90045 ....................440 537-90116 ......................440 537-90119 ......................440 537-90135 .....................440 537-90144 .....................440 537-90150 .....................440 537-90155 .....................440 537-90200 ....................440 537-90201 .....................440 537-91119 .......................440 537-95893 .....................443 538-00018 ....................445 538-00340 ....................445 538-01160 .....................446 538-01163 ......................446 538-10000 ....................444 538-10013 ......................446 538-10014......................446 538-10020 .....................446 538-10021 ......................446 538-10134 ......................446 538-10135 ......................446 538-10200 .....................444 538-10700 .....................444 538-10900 ....................444 538-11100 ......................444 538-11200 ......................444 538-11201 .......................446 538-11400 .....................444 538-11401 .......................446 538-11600......................444 538-11601 .......................446 538-11800 ......................444 538-12000 .....................444 538-12011 .......................446 538-12200 .....................444 538-12900 .....................446 538-12900 .....................467 538-13000 .....................445 538-13017 ......................444 538-13023 .....................444 538-14000 ....................445 538-15000 .....................445 538-15100 ......................445 538-15200 .....................445 538-15400 .....................445 538-15600 .....................445 538-20011 ......................446 538-30000 ...................445 538-30200 ....................445 538-30400 ....................445 538-30500 ....................445 538-30600 ....................445 538-31000 .....................445 538-31200 .....................445 538-31400 .....................445 538-41212 ......................446 538-41270 .....................446 538-42223.....................446 538-51290 .....................446 538-60100 ....................445 538-60300 ....................445 538-60500 ...................445 538-60541 .....................428 538-61100 .....................445 538-61300 .....................445 538-61900.....................445 538-62600 ....................445 538-63500 ....................445 538-70750.....................446 538-70800 ....................446 538-70850 ....................446 539-00005 ...................464 539-00006 ...................464 539-02203 ....................434 539-02204 ....................434 539-02205 ....................434 539-02206 ....................434 539-02207 ....................434 539-02208 ....................434 539-02209 ....................434 539-02210 .....................434 539-02241 .....................434 539-06260 ....................434 539-06261 .....................434 539-06310 .....................434 539-06311 ......................434 539-06312 .....................434 539-06313 .....................434 539-06314 .....................434 539-06315 .....................434 539-06316 .....................434 539-06317 .....................434 539-06360 ....................434 539-06361 .....................434 539-06410 ....................434 539-06411 .....................434 539-06412 .....................434 539-06413 .....................434 539-06414.....................434 539-06415 .....................434 539-06416 .....................434 539-06417 .....................434 539-10001 .....................450 539-10116 .......................435 539-10123 ......................435 539-10136 ......................435 539-10160......................435 539-10416 ......................435 539-10423 .....................435 539-10436 .....................435 539-10460.....................435 539-10916 ......................435 539-10923 .....................435 539-10936 .....................435 539-10960.....................435 539-11016 .......................435 539-11023 ......................435 539-11036 ......................435 539-11060 .....................435 539-11075 ......................464 539-11076 ......................464 539-11133 .......................464 539-11134 .......................464 539-15516 ......................436 539-15536 .....................436 539-15616 ......................435 539-15636 .....................435 539-15816 ......................435 539-15836 .....................435 539-16316 ......................435 539-16336 .....................435 539-16416 ......................435 539-16436 .....................435 539-16516 ......................435 539-16536 .....................435 539-18416 ......................436 539-18436 .....................436 539-18516 ......................436 539-18536 .....................436 539-18616 ......................436 539-18636 .....................436 539-18716 ......................436 539-18736 .....................436 539-18816 ......................436 539-18836 .....................436 539-28646 ....................436 539-32056 ....................436 539-32058 ....................436 539-32063 ....................436 539-32064 ....................436 539-32065 ....................436 539-33004 ....................436 539-33009 ....................436 539-33010 .....................436 539-33017 .....................436 539-80002 ....................466 539-80003 ....................466 539-80012 .....................466 539-80013 .....................466 541-00001 .....................420 541-00002 ....................420 541-00003 ....................420 541-00400 ....................416 541-00410 .....................416 541-00420 ....................416 541-00430 ....................416 541-00440 ....................416 541-00450 ....................416 541-00460 ....................416 541-00470 ....................416 541-00472 .....................416 541-00502 ....................409 541-00503 ....................409 541-00504 ....................409 541-00505 ....................409 541-00506 ....................409 541-00507 ....................409 541-00522 .....................409 541-00533 .....................409 541-00544 ....................409 541-11000 ......................429 541-11001 .......................429 541-11002 ......................429 541-11003 ......................429 541-11004 ......................429 541-11005 ......................429 541-11006 ......................429 541-11007 ......................429 541-11008 ......................429 550-00045 ...................420 550-00055 ...................420 550-00125 ....................413 550-00145 ....................420 550-00155 ....................420 550-00501 ....................409 550-00502 ...................409 550-00503 ...................409 550-00522 ....................409 550-00533 ....................409 550-00534 ....................409 550-01533 .....................409 550-04101 .....................420 550-04102 ....................420 550-04103 ....................420 550-05101 .....................420 550-05102.....................420 550-05103.....................420 550-26707 ....................417 550-26714 .....................417 550-26721 .....................417 550-26738 ....................417 550-26745.....................417 550-26752 ....................417 561-11488 .......................430 561-11489 .......................430 561-11490 ......................430 561-11491 .......................430 561-11492 .......................430

494 NUMERICAL INDEX 561-11493 .......................430 561-11494.......................430 561-11495 .......................430 561-11496.......................430 561-11497 .......................430 561-11498 .......................430 561-11499.......................430 562-00470 ....................419 562-00471 .....................419 562-00472 ....................419 562-00473 ....................419 562-00474 ....................419 562-00501 ....................412 562-00502 ....................412 562-00503 ....................412 562-00504 ...................412 562-00505....................412 562-00506 ...................412 562-00507 ....................412 562-00508 ...................412 562-00509 ...................412 562-00511* ....................412 562-01503 .....................413 562-01504 ....................413 562-01505 .....................413 562-26006 ....................422 562-26037 ....................422 562-26044 ....................422 562-26051 .....................422 562-26068 ....................422 562-26075 ....................422 562-26082 ....................422 562-26099 ....................422 562-26109 .....................422 562-26212 .....................422 562-26213 .....................422 562-26314 .....................422 562-26315 .....................422 563-00200 ...................422 563-00210 ....................422 563-00220 ....................422 563-00230 ....................422 563-00240....................422 563-00250 ....................422 563-00400 ...................422 563-00410 ....................422 563-00420 ...................422 564-90012 ....................404 564-90013 ....................404 564-90014 ....................404 564-90022....................404 564-90111 ......................404 567-05620 ....................422 567-05820 ....................422 567-05821 .....................422 568-00500 ...................412 568-00501 ....................412 568-00502 ...................412 568-00503....................412 568-00504 ...................412 568-00505 ...................412 568-00506 ...................412 568-00507 ....................412 568-05000 ...................422 568-05010 ....................422 568-05200 ...................422 568-05210.....................422 568-05400 ...................422 568-05410 ....................422 568-05600 ...................422 568-05610 ....................422 568-05800 ...................422 568-05810 ....................422 569-00090 ...................414 569-00091 ....................414 571-00010 .....................414 571-00011 ......................414 571-11115 .........................429 571-11116 .........................429 571-11307 .......................429 571-11309 .......................429 571-11311 .........................429 571-11312 ........................429 571-11313 ........................429 571-11321 ........................429 571-11322 .......................429 571-11323 .......................429 571-11324 .......................429 571-11325 .......................429 571-11808 .......................430 571-11810 ........................430 571-11812 ........................430 571-11814 ........................430 571-11820 .......................430 571-11822 .......................430 571-11824 .......................430 571-11825 .......................430 571-11835 .......................430 571-11840 .......................430 571-11842 .......................430 571-11844 .......................430 571-11845 .......................430 571-22926 .....................428 571-22928 .....................428 571-22960 .....................428 571-90410 .....................405 571-90705 .....................405 571-91964 ......................406 571-91968 ......................406 574-05180 .....................411 574-05182 .....................411 574-05184 .....................411 574-05186 .....................411 575-00010 ....................419 575-00012 .....................419 575-00014 ....................419 575-00020 ....................419 575-00022 ....................419 575-00024 ....................419 575-00040 ...................419 575-00042 ....................419 575-00044....................419 575-00110 .....................414 575-00115 ......................414 575-00116 ......................414 575-01110 ......................413 575-01115 .......................413 575-01120 ......................413 575-01122 ......................413 575-01124 ......................413 575-01125 ......................413 575-01126 ......................413 575-01135 ......................413 575-01140 ......................413 575-01142 ......................413 575-01144 ......................413 575-05109 .....................411 575-05110 ......................411 575-05111 .......................411 575-05112 ......................411 575-05113 ......................411 575-05114 ......................411 575-05115 ......................411 575-05120 .....................411 575-05122 .....................411 575-05124 .....................411 575-05125 .....................411 575-05126 .....................411 575-05135 .....................411 575-05140 .....................411 575-05142 .....................411 575-05144 .....................411 575-15109 ......................411 575-15110 .......................411 575-15112 .......................411 575-15120 ......................411 575-25112 ......................411 576-00120 .....................414 576-00122 .....................414 576-00124 .....................414 576-00125 .....................414 576-00128 .....................414 576-00135 .....................414 576-00140 ....................414 576-00142 .....................414 576-00144.....................414 576-00531 .....................415 576-00533 ....................415 576-00535 ....................415 576-00537 ....................415 576-00539 ....................415 576-00581 .....................415 576-00583 ....................415 576-00585 ....................415 576-00587 ....................415 576-00589 ....................415 576-90010 ....................405 576-90012 .....................405 576-90014 .....................405 576-90020 ....................405 576-90040 ...................405 576-90110 .....................405 576-90111 .......................405 576-90112 ......................405 576-90114 ......................405 576-90120 .....................405 577-00146 .....................414 577-00150 .....................414 577-00152 .....................414 577-00155 .....................414 577-00156 .....................414 577-00160 .....................414 577-00162 .....................414 577-00165 .....................414 577-00168 .....................414 577-00175 .....................414 577-00180 .....................414 577-00182 .....................414 577-00184 .....................414 577-00185 .....................414 577-00186 .....................414 577-00188 .....................414 577-00190 .....................414 581-13620 ......................430 581-13621 .......................430 581-13622 ......................430 581-13623 ......................430 581-67010 .....................417 581-67045 .....................417 581-67050 .....................417 581-67308 .....................417 581-67340 .....................417 581-68008 ....................417 581-68020 ....................417 581-68406 ....................417 581-68418 ......................417 582-00378 ....................418 582-00379 ....................418 582-00386 ....................418 582-00387 ....................418 582-00388 ....................418 582-00501 ....................409 582-00502 ....................409 582-00503 ....................409 582-00504 ...................409 582-00522 ....................409 582-00533 ....................409 582-00544 ....................409 582-01386 .....................418 582-19311 .......................416 582-19410 ......................416 582-19420 .....................416 582-19430 .....................416 582-19621 ......................416 582-19820 .....................416 583-13670 .....................431 583-13672 ......................431 583-13673 ......................431 583-13674 ......................431 583-23672 .....................431 583-23673 .....................431 583-23674 .....................431 583-23675 .....................431 585-00501 ....................410 585-00502 ....................410 585-00504 ...................410 585-10071 ......................428 585-30581 .....................428 585-30820 ....................428 585-60410 ....................428 587-00375 ....................418 587-00376 ....................418 587-00381 .....................418 587-00382 ....................418 587-01150 ......................403 587-01151 .......................403 587-01152 ......................403 587-01303 .....................403 587-01306 .....................403 587-01309 .....................403 587-01406 .....................403 587-01409 .....................403 587-13381.......................429 587-13382 ......................429 587-13386 ......................429 587-33810 .....................429 587-33811 ......................429 587-90003 ....................403 587-90016 .....................403 587-90018 .....................403 587-90033 ....................403 587-90066 ....................403 587-90088 ....................403 587-90099 ....................403 587-90110 ......................403 601-00101......................384 602-60210 ....................452 602-60211 .....................453 603-00275 ....................454 603-00825....................454 603-40200 ...................454 603-42400 ...................454 603-43700 ....................454 603-44000 ...................454 603-44300 ...................454 603-44700 ...................454 603-52000 ...................454 603-52800....................454 603-52900 ...................454 603-53100 ....................454 603-53400....................454 603-53500 ....................454 603-82501 .....................454 603-82502 ....................454 603-82503 ....................454 603-82504 ....................454 603-82505 ....................454 603-82506 ....................454 603-82507 ....................454 603-82508 ....................454

495 NUMERICAL INDEX 603-82509 ....................454 603-82510 .....................454 603-82511 ......................454 604-01275 .....................454 604-05045 ...................453 604-05120 ....................453 604-05500 ...................453 604-10300 ....................454 604-10900 ....................454 604-11000 .....................454 604-11900 .....................454 604-12700 ....................454 605-00101 .....................455 605-08028 ...................455 605-14191 ......................455 605-31554 .....................455 606-57000 ...................465 606-57001 ....................465 613-00414 .....................461 613-00418 .....................461 613-00436 ....................467 613-00438.....................461 613-00465 ....................467 613-00466 ....................467 613-00467.....................467 613-00470 ....................467 613-00512 .....................467 613-00514 .....................461 613-00518 .....................461 613-00538 .....................461 613-00614 .....................461 613-00618 .....................461 613-00638.....................461 613-00674 .....................467 613-00699 ....................467 613-00705 .....................467 613-00839.....................467 613-00846 ....................467 613-00937 .....................467 613-00938 .....................467 613-04316......................461 613-04516 .....................461 613-04532 .....................461 613-06316......................461 613-06516 .....................461 613-06532 .....................461 613-09111 .......................467 613-11201........................463 613-11202 .......................463 613-11205 .......................463 613-11206 .......................463 613-11207 .......................463 613-11301........................463 613-11302 .......................463 613-11303 .......................463 613-11310........................463 613-11311 .........................463 613-11312 ........................463 613-11328 .......................463 613-11329 .......................463 613-11330 .......................463 613-11341 ........................463 613-11342 .......................463 613-11343 .......................463 613-11380 .......................463 613-11381 ........................463 613-11382 .......................463 613-11383 .......................463 613-11384 .......................463 613-11385 .......................463 613-11391 ........................463 613-12900 .....................462 613-19111 ........................467 613-23800 .....................467 613-25718 ......................467 613-28081 ......................467 613-28271 ......................467 613-28313 ......................467 613-29617 ......................467 613-29618 ......................467 613-32769 .....................467 613-32774 ......................467 613-32822 .....................467 613-33093 .....................467 613-33162 ......................467 613-33379 ......................467 613-33564 .....................467 613-39020 .....................467 613-43811 .......................462 613-43812 ......................462 613-43813 ......................462 613-43814 ......................462 613-43815 ......................462 613-43831 ......................462 613-43897 .....................462 613-43924 .....................462 613-43934 .....................462 613-43935 .....................462 613-43936 .....................462 613-43937 .....................462 613-43938 .....................462 613-43939 .....................462 613-43940 .....................462 613-43941 ......................462 613-43943 .....................462 613-43944 .....................462 613-43945 .....................462 613-43946 .....................462 613-53165 ......................461 613-91207 ......................464 613-91321 .......................464 613-91322 ......................464 613-91501 ......................464 613-91502 ......................464 613-91503 ......................464 613-91504 .....................464 616-00111 .......................461 616-00222 .....................461 616-00320 ....................461 616-00325 .....................461 616-00333 .....................461 616-00416 .....................461 616-00420 ....................461 616-00425 ....................461 616-00944 ....................462 616-01155 ......................462 616-01156 ......................462 616-01420 .....................462 616-11116 ........................462 616-11173 ........................462 616-11275 .......................462 616-11304 ......................463 616-11305.......................463 616-11313 ........................463 616-11314 .......................463 616-11346.......................463 616-11347 .......................463 616-11365 .......................463 616-11400 ......................462 616-11520.......................461 616-11521 ........................462 616-11525 .......................461 616-11603 ......................464 616-11604 ......................464 616-11605 ......................464 616-11606 ......................464 616-11610 .......................464 616-11612........................464 616-16101 .......................464 616-16102 ......................464 616-16121........................464 616-16122 .......................464 616-21525 ......................462 616-43912 ......................462 616-43914 .....................462 616-43920 .....................462 616-43921 ......................462 616-43928 .....................462 616-43940 ....................462 616-82013 ......................464 616-82014 .....................464 632-00005 ...................160 632-00010 ....................160 632-00032 ....................160 632-00922 ....................160 632-00923 ....................160 632-01002.....................160 632-01002.....................469 632-02400 ....................160 632-10001 .....................160 633-50105 .....................469 633-50154 .....................469 633-83005 ....................469 633-83015 .....................469 634-00115 .....................468 634-00121 .....................468 634-00812 ....................468 634-00815 ....................468 634-00820 ...................468 634-05586 ....................468 634-05587 ....................468 634-12027 .....................467 634-14027 .....................467 634-15027 .....................467 634-18027 .....................467 639-02338 ....................465 639-05010 ....................465 639-05012.....................465 639-08008 ...................465 639-10800 ....................465 639-11081 ......................464 639-11139 .......................464 639-42308 ....................464 639-42312 .....................464 639-50184 .....................464 639-50806....................464 643-40001 ....................471 643-40002 ...................471 643-40003 ...................471 643-40004 ...................471 643-40005 ...................471 643-40006 ...................471 643-40007 ...................471 643-40008 ...................471 643-40009 ...................471 643-40010 ....................471 643-40011 .....................471 643-40012 ....................471 643-40013 ....................471 643-40014 ....................471 643-40015 ....................471 643-40016 ....................471 643-40017 ....................471 643-40018 ....................471 643-40019 ....................471 643-40020 ...................471 643-40021 ....................471 643-40022 ....................471 643-40023 ....................471 643-40024....................471 643-40025 ....................471 643-40026 ...................471 643-40027 ....................471 643-40028....................471 643-40029 ...................471 643-40030 ...................471 643-40031 ....................471 643-40032 ....................471 643-40033 ....................471 643-40034 ...................471 643-40035 ....................471 643-40036 ...................471 643-40037 ....................471 643-40038....................471 644-12345 .....................467 645-00011 .....................465 645-00017 ....................465 645-00117 .....................465 645-00321.....................465 645-00812 ....................465 645-00814 ....................465 645-00874 ....................465 645-01000 ....................465 645-01604 ....................465 645-01812 .....................468 645-01815 .....................468 645-02014 ....................465 645-02110 .....................465 645-03000 ...................465 645-08476 ....................465 645-16171 .......................465 645-21192 ......................465 647-00032 ....................470 647-05611 ......................470 647-05612 .....................470 647-05613 .....................470 647-24501 .....................469 647-24505 ....................469 649-40100 ....................471 649-83340 ....................471 651-32437......................466 651-35462 .....................466 651-63415 ......................466 653-40082 ....................466 703-00400 ...................381 703-00509 ...................380 703-00810 ....................380 703-00818 ....................380 703-47147 .....................380 719-00016 .....................457 719-00018 .....................99 719-00032 ....................344 719-00116 ......................457 719-10016 ......................457 719-10116 .......................457 719-12001 ......................404 719-12157 .......................458 719-12415 .......................458 719-12419 .......................458 719-12420 ......................458 719-21315 .......................457 719-33135 ......................457 719-82222 .....................294 719-82478 .....................458 721-63001 ......................455 721-63001-R..................455 736-10004 ....................442 751-00060 ....................381 751-00072 .....................381 751-00080 ....................381 844-16259 .....................302 844-16572 .....................302

TAKES AXION AXION Tire Balance is a custom-formulated internal balancing compound that delivers consistent, reliable wheel balance while enhancing technician safety and protecting TPMS sensors and wheel components. TM LIFETIME TIRE BALANCE ANTI-SLIP FORMULA Provides inherent anti-slip properties for safe performance even if spilled. TPMS COMPATIBLE AXION and all Counteract compounds are third-party validated and certified safe TPMS systems. ADDED DENSITY Unique fillers are added during production to achieve the ideal density and mass for optimal tire balance performance. MOISTURE RESISTANT Resists oils and tire chemicals, while a hydrophobic coating keeps it clump-free. EASY INSTALLATION LIFETIME TIRE BALANCE A trouble-free, self-adjusting balancing compound that continuously balances the entire rotating wheel assembly. JUST THROW THE CLEAR INSIDE BAG INTO YOUR TIRE! MED-HEAVY DUTY TRUCKS LIGHT TRUCKS OFF-ROAD TRAILER ATV/UTV AXIONBALANCE.COM CLASSIC CAR Scan the QR code for more details! TIRE BALANCING COMPOUND BY

THE BEST SELLING SENSOR FIND OUT WHY AWARD-WINNING TOOLS Autel TPMS tools can activate, read, and relearn all known sensors. COMPLETE COVERAGE Autel 1-Sensor can replace sensors on 99.6% of all vehicles. MAXITPMS ITS600 HANDHELD TPMS SERVICE & DIAGNOSTIC TABLET This powerful, wireless touchscreen Android tablet provides complete TPMS diagnostics and service functions for U.S., Asian, and European TPMS-equipped vehicles. The ITS600’s top features include VINscan for rapid vehicle identification, industry-leading OBDII relearn functionality, and vehicle-specific, step-by-step onscreen relearn instructions. Use the ITS600 to program the dual-frequency Autel 1-Sensor to replace 99.6% of TPMS sensors on today’s vehicles. MAXITPMS TS900 3-IN-1 TPMS, ADVANCED DIAGNOSTICS, & SERVICE TABLET The TS900 redefines the service tool. This professional all-systems diagnostic and service tool, with complete TPMS service capabilities, can read and erase codes, view freeze frame and live data, and perform bidirectional controls, including active tests and special functions for 1996+ U.S., Asian, and European vehicles. The wireless Android tablet provides comprehensive TPMS service, including activating, reading, and relearning all known sensors, industry-leading OBDII relearn capability, and can program the Autel dual-frequency 1-Sensor to replace 99.6% of TPMS sensors. 1.855.288.3587 USSUPPORT@AUTEL.COM AUTEL ACADEMY TRAINING autel.us/academy WEB: AUTEL.US FOLLOW US: @AUTELTOOLS AFTERMARKET ONE PART NUMBER Eliminate the need to stock any other sensor type or brand.

1 Publizr

Index

1. 1
2. 2
3. 3
4. 4
5. 5
6. 6
7. 7
8. 8
9. 9
10. 10
11. 11
12. 12
13. 13
14. 14
15. 15
16. 16
17. 17
18. 18
19. 19
20. 20
21. 21
22. 22
23. 23
24. 24
25. 25
26. 26
27. 27
28. 28
29. 29
30. 30
31. 31
32. 32
33. 33
34. 34
35. 35
36. 36
37. 37
38. 38
39. 39
40. 40
41. 41
42. 42
43. 43
44. 44
45. 45
46. 46
47. 47
48. 48
49. 49
50. 50
51. 51
52. 52
53. 53
54. 54
55. 55
56. 56
57. 57
58. 58
59. 59
60. 60
61. 61
62. 62
63. 63
64. 64
65. 65
66. 66
67. 67
68. 68
69. 69
70. 70
71. 71
72. 72
73. 73
74. 74
75. 75
76. 76
77. 77
78. 78
79. 79
80. 80
81. 81
82. 82
83. 83
84. 84
85. 85
86. 86
87. 87
88. 88
89. 89
90. 90
91. 91
92. 92
93. 93
94. 94
95. 95
96. 96
97. 97
98. 98
99. 99
100. 100
101. 101
102. 102
103. 103
104. 104
105. 105
106. 106
107. 107
108. 108
109. 109
110. 110
111. 111
112. 112
113. 113
114. 114
115. 115
116. 116
117. 117
118. 118
119. 119
120. 120
121. 121
122. 122
123. 123
124. 124
125. 125
126. 126
127. 127
128. 128
129. 129
130. 130
131. 131
132. 132
133. 133
134. 134
135. 135
136. 136
137. 137
138. 138
139. 139
140. 140
141. 141
142. 142
143. 143
144. 144
145. 145
146. 146
147. 147
148. 148
149. 149
150. 150
151. 151
152. 152
153. 153
154. 154
155. 155
156. 156
157. 157
158. 158
159. 159
160. 160
161. 161
162. 162
163. 163
164. 164
165. 165
166. 166
167. 167
168. 168
169. 169
170. 170
171. 171
172. 172
173. 173
174. 174
175. 175
176. 176
177. 177
178. 178
179. 179
180. 180
181. 181
182. 182
183. 183
184. 184
185. 185
186. 186
187. 187
188. 188
189. 189
190. 190
191. 191
192. 192
193. 193
194. 194
195. 195
196. 196
197. 197
198. 198
199. 199
200. 200
201. 201
202. 202
203. 203
204. 204
205. 205
206. 206
207. 207
208. 208
209. 209
210. 210
211. 211
212. 212
213. 213
214. 214
215. 215
216. 216
217. 217
218. 218
219. 219
220. 220
221. 221
222. 222
223. 223
224. 224
225. 225
226. 226
227. 227
228. 228
229. 229
230. 230
231. 231
232. 232
233. 233
234. 234
235. 235
236. 236
237. 237
238. 238
239. 239
240. 240
241. 241
242. 242
243. 243
244. 244
245. 245
246. 246
247. 247
248. 248
249. 249
250. 250
251. 251
252. 252
253. 253
254. 254
255. 255
256. 256
257. 257
258. 258
259. 259
260. 260
261. 261
262. 262
263. 263
264. 264
265. 265
266. 266
267. 267
268. 268
269. 269
270. 270
271. 271
272. 272
273. 273
274. 274
275. 275
276. 276
277. 277
278. 278
279. 279
280. 280
281. 281
282. 282
283. 283
284. 284
285. 285
286. 286
287. 287
288. 288
289. 289
290. 290
291. 291
292. 292
293. 293
294. 294
295. 295
296. 296
297. 297
298. 298
299. 299
300. 300
301. 301
302. 302
303. 303
304. 304
305. 305
306. 306
307. 307
308. 308
309. 309
310. 310
311. 311
312. 312
313. 313
314. 314
315. 315
316. 316
317. 317
318. 318
319. 319
320. 320
321. 321
322. 322
323. 323
324. 324
325. 325
326. 326
327. 327
328. 328
329. 329
330. 330
331. 331
332. 332
333. 333
334. 334
335. 335
336. 336
337. 337
338. 338
339. 339
340. 340
341. 341
342. 342
343. 343
344. 344
345. 345
346. 346
347. 347
348. 348
349. 349
350. 350
351. 351
352. 352
353. 353
354. 354
355. 355
356. 356
357. 357
358. 358
359. 359
360. 360
361. 361
362. 362
363. 363
364. 364
365. 365
366. 366
367. 367
368. 368
369. 369
370. 370
371. 371
372. 372
373. 373
374. 374
375. 375
376. 376
377. 377
378. 378
379. 379
380. 380
381. 381
382. 382
383. 383
384. 384
385. 385
386. 386
387. 387
388. 388
389. 389
390. 390
391. 391
392. 392
393. 393
394. 394
395. 395
396. 396
397. 397
398. 398
399. 399
400. 400
401. 401
402. 402
403. 403
404. 404
405. 405
406. 406
407. 407
408. 408
409. 409
410. 410
411. 411
412. 412
413. 413
414. 414
415. 415
416. 416
417. 417
418. 418
419. 419
420. 420
421. 421
422. 422
423. 423
424. 424
425. 425
426. 426
427. 427
428. 428
429. 429
430. 430
431. 431
432. 432
433. 433
434. 434
435. 435
436. 436
437. 437
438. 438
439. 439
440. 440
441. 441
442. 442
443. 443
444. 444
445. 445
446. 446
447. 447
448. 448
449. 449
450. 450
451. 451
452. 452
453. 453
454. 454
455. 455
456. 456
457. 457
458. 458
459. 459
460. 460
461. 461
462. 462
463. 463
464. 464
465. 465
466. 466
467. 467
468. 468
469. 469
470. 470
471. 471
472. 472
473. 473
474. 474
475. 475
476. 476
477. 477
478. 478
479. 479
480. 480
481. 481
482. 482
483. 483
484. 484
485. 485
486. 486
487. 487
488. 488
489. 489
490. 490
491. 491
492. 492
493. 493
494. 494
495. 495
496. 496
497. 497
498. 498
499. 499
500. 500

Home