143 LIFTING EQUIPMENT SPECIALTY JACKS 1-TON CAPACIT HYDRAULIC TRANSMISSION JACK • Designed for the remo installation and transporta (in the lowered position) of heavy duty truck transmis that are raised by an abo ground lift • Air/hydraulic f pump for hands free oper • Fully adjustable univer saddle with adjustable arms • Heavy duty chain with chain tensioner to secure load t saddle • Made in Taiwan ® PROFESSIONAL LIFTING EQUIPMENT 1-1/2-TON CAPACITY TRUCK TRANSMISSION JACKS • For heavy truck transmissions • Fully adjustable universal saddle with adjustable arms to position the transmission • Heavy duty chain with convenient chain tensioner secures load to saddle • Safety bypass system prevents damage to the hydraulic cylinder • Norco manufactures over 20 vehicle and service specific adapters to enhance the capabilities of their transmission jacks ASCOT NO. 371-72701 MFG. NO. 72701A CAP. (TONS) 1 MIN. HGT. / MAX. HGT. 41-1/4" / 69-3/8” WT. (LB.) ASCOT NO. 273 371-72000 72000E 2,500 LBS. CAPACITY POWERTRAIN LIFT/TABLE • An air/hydraulic foot pump includes a metered valve for safe lowering of the load • Safety overload system in the air/ hydraulic pump prevents jack from being used beyond the load-limiting standard • Five foot extension hose with quick disconnect fittings stores in the lift base. The foot pump can be removed from its holder and hydraulic hose quickly and easily extended by 5’ using the extension hose. This provides hands free operation of the pump anywhere around the lift’s perimeter • Scissors lift design provides easy 360˚ access to any component • Two heavy duty ratchet tie-downs are included to safely secure the load on the lift table • Table top height from 31” to 77-3/4” (with wood saddles) or 27.5” to 74-1/4” (base plate only) • Four 8” diameter swivel caster wheels for easy maneuverability. Rear wheels can be locked to prevent the lift from rolling ASCOT NO. 371-72850 MFG. NO. 72850A MIN. HGT. / MAX. HGT. 31" / 78" WT. (LB.) 665 Lbs. ASCOT NO. MFG. NO. 302-72036 72036D MF NO. 72000Ei 4-TON CAP FORKLIFT J • Two-position saddle a rotated to handle either edges or fla a load • 2-1/4" lo removable handle f when not in use • Our “ knob provides slo load • Safety bypas cylinder damage and pr used beyond the A CAP. (TONS) 4 MIN. HGT. / MAX. HGT. 2-1/4" / 16-1/4" OVERALL LENGTH 26-1/8" OVERALL WIDTH 8-3/4" WT. (LB.) 75
145 Publizr Home