VALVES & ACCESSORIES SCREW-IN RIM SPUDS • Used to attach any of the super large bore valves to the rim and is designed to screw into a 1/2" NPT tapped rim hole • Can be changed without dismounting the tire ASCOT NO. MFG. NO. 464-00209 C-100 DESCRIPTION 464-00209 Effective Length 1/4" Longer LARGE BORE VALVES LARGE BORE SCREW-ON REPAIR VALVES FOR INNER TUBES SCREW-IN RIM SPUDS • 85° bend angle ASCOT NO. MFG. NO. 466-00850 466-00851 S-85 S-85-D DESCRIPTION 466-00850 Fits 1/2" NPT Tapped Rim Hole Furnished With A Locking Nut With A Teflon Seal So Direction Can Be Reversed CORE HOUSING • Complete with core and cap • Designated at Tire and Rim as the CH-8 • Integral part of the system as the CH-8 is removed from the valve assembly with the IN-80A adapter to utilize the larger opening and the fullest flow of the 6185 check valve ASCOT NO. MFG. NO. TR NO. 466-00918 R-520 TR-CH-8 DESCRIPTION Core Housing SUPER LARGE BORE INFLATOR ADAPTER • New, safer alternative to IN-80A • Left hand threads on union body — will not come loose when screwing on to valve • New non-removable stem guide • 3/4" pipe thread for easy air hose connection • During inflation, air pressure in the tire can be checked through the stem knob with a tire pressure gauge • Will insert or extract CH-8 or CH-9 core housing • Pressure can be checked without disconnecting with a Large Bore Gauge • 1-piece stainless steel stem and collet • Reduces inflation time 60%, deflation time 80% • The core housing is held in a stainless steel extractor by a snap ring • Extractor is rugged enough so that the core housing c be loosened or tightened without being damaged 466-00851 • Supplied in straight or bent form ready for installation on tubes • Equipped with A-146 valve coer and A-149 hex cap • Used with SP-1000 tube spud 465-10781 262 466-00918 ASCOT NO. MFG. NO. TR NUMBER 465-01014 465-10760 465-10761 465-10762 465-10763 465-10764 465-11750 465-11751 465-11752 465-10780 465-10781 465-10782 465-11790 465-11791 465-11792 LB-216 LB-217 LB-218 LB-219 J-1014 LB-220 J-1076D LB-221 J-1076E J-1078B LB-228 J-1078C J-1179C LB-229 J-1179A Straight LB-230 J-1179B LB-231 88° 86° 6-13/32" 1-3/8" 1-1/8" 5-1/4" 5-1/2" A-ANGLE BEND Straight J-1076A Straight J-1076B J-1076C 86° 90° 90° 88° LB-223 J-1175A Straight LB-224 J-1175B LB-225 J-1175C 82° 88° LB-226 J-1078A Straight LB-227 82° 90° B-VERTICAL HEIGHT 1-29/32" 4-5/32" 1-1/8" 1-1/2" 2-1/16" 1-3/8" 5-9/32" 1-1/4" 1-3/8" 5-25/32" 1-3/8" 1-1/8" C-HORIZONTAL LENGTH - - 3-1/4" 2-7/8" 2-5/16" 3" - 4-1/4" 4-1/8" - 4-5/8" 4-7/8" - LARGE BORE SCREW-ON REPAIR VALVE ADAPTERS FOR INNER TUBES 465-40000 ASCOT NO. MFG. NO. 465-40000 H-4000 466-05311 465-40011 DESCRIPTION Adapter Converts Tubes having SP-1000 Type Spud To Accept Large Bore Swivel Valves. Equipped With BW-18 Washer and Used With Rim Slots H-4000-1 Same As H-4000 Except Without Bridge Washer and Hex Nut CLAMP-IN RIM SPUD PARTS INCLUDEDIN-100A PARTS LISTPARTS INCLUDED E-3100-2A Connector Sleeve IN-100-1A Body for IN-100 IN-100-3A Nut for Connector Sleeve 10218 O-Ring G-202 Teflon Washer ASCOT NO. MFG. NO. 466-05311 IN-100A DESCRIPTION Super Large Bore Inflator Adapter E-3100-12 Hand Knob E-3100-1A Stem and Collet 464 Lock nut A-147 • Fits 13/16" diameter valve hole • Can attach to any super large bore valve to the rim through a standard valve hole (13/16" diameter) 464-00208 ASCOT NO. MFG. NO. TR NUMBER 464-00208 464-00082 T-81 T-82 TR-SP8 — DESCRIPTION Clamp-In Rim Spud T-82 Clamp-In Rim Spud - 1/4" longer effective length
264 Publizr Home