® LIFTING EQUIPMENT SHOP PROFESSIONAL LIFTING EQUIPMENT CRANES 2 AND 3-TON CAPACITY SHOP CRANES • Designed to raise, lower and transport engines, transmissions, differentials and other heavy loads with minimal effort • Four adjustable legs provide greater stability • 1/2 and 2-ton are boom retracted • 3-ton available in either air/hydraulic or electro/hydraulic • ASSEMBLED IN THE USA ASCOT NO. MFG. NO. 331-78106 OPERATING SYSTEM 78106A Manual 331-78600 78600B Air/ Hydraulic 331-78605 78605A Electro/ Hydraulic BOOM CAP. @ LENGTH 2-Ton @ 44-3/4" 3-Ton @ 65" 2-1/2-Ton @ 81" BOOM MIN. 0" BOOM MAX. 88" LEG EXTENSION 83-1/2" 13" 149-1/2" 49", 65", 81" 13" 149-1/2" 49", 65", 81" OVERALL SIZE (W X L X H) 74-1/2" X 51-3/4" X 70-3/4" 75" X 51" X 90-1/2" 75" X 51" X 90-1/2" WEIGHT (LB.) 320 1,150 1,182 331-78106 150 1,250 LBS. CAPACITY 75:1 GEAR-DRIVEN ENGINE STAND • 75:1 ratio gearbox activated by hand crank easily turns the 360 degree rotating head to the desired work position • Meets the ASME PASE performance and safety standards • Fully adjustable engine mounting head • Two rigid rear wheels. One of the two front swivel casters has a lock for maximum stability and support • Polyurethane wheels provide protection for expensive tile and epoxy floors • Telescopic base locks into any one of four different positions to extend the length of the stand for added stability when required. ASCOT NO. MFG. NO. 331-78155 78155 DESCRIPTION 1,250 LBS. Capacity 75:1 Gear-Driven Engine Stand 2,000 LBS. CAPACITY 75:1 GEAR-DRIVEN ENGINE STAND • 75:1 ratio gearbox activated by hand crank easily turns the 360 degree rotating head to the desired work position • Meets the ASME PASE performance and safety standards • Two rigid rear wheels. One of the two front swivel casters has a lock for maximum stability and support • Polyurethane wheels provide protection for expensive tile and epoxy floors • Includes two universal mounting plates, rotating shaft, eight fully adjustable arms and all the related mounting hardware • Rotating shaft with mounting plate telescopes inside the post receiver for fine adjustment when mounting ends or sides of engines • Mounting plates can be adjusted 36-1/4” apart ASCOT NO. MFG. NO. 331-78155 78155 DESCRIPTION 1,250 LBS. Capacity 75:1 Gear-Driven Engine Stand
152 Publizr Home