1 2 3 Shake bottle well. Dispense a small amount of verdigris, jade, marine and cobalt patina onto a non-stick craft sheet. 4 Use a paint brush to apply a thin coat of verdigris patina to the surface of the dragonfly. 5 Use a paint brush to apply a thin coat of jade patina to the edges of the wings. Blot with a paper towel. 6 Materials List • 51x63mm Dragonfly Verdigris, Jade, Marine and Cobalt Vintaj Patinas • Paper Towel Necessary Tools • Non-Stick Craft Sheet Use a paint brush to apply a thin coat of marine patina to the center of the wings. Blot with a paper towel. 7 Use a paint brush to apply a thin coat of cobalt patina to the body of the dragonfly. 8 Blot with a paper towel. • Paint Brush • Reliefing Block • Heat tool 9 Helpful Tips Relief your project before the patina has completely cured. The longer it cures, the tougher the finish to relief. Use a paint brush to touch up the wings with verdigris patina. Blot with a paper towel. Use the dark gray side of a Reliefing Block to remove patina from the raised areas of the dragonfly. To add durability to the patina finish, heat the entire piece with a heat tool. Allow to completely cool before handling. 4.
6 Publizr Home