Tranquil Journey patina Shake bottles well. Dispense a small amount of verdigris, jade & moss patina onto a non-stick craft sheet. Dispense 1 part antique copper metallic patina to 3 parts glaze. Use a flat tip paint brush to apply & blend verdigris, jade & moss patina on the dragonfly reed using a dabbing motion to create a mottled look. Wash paint brush with water. Use a paper towel to dry paint brush completely. 1 Tools & Supplies Vintaj metal reliefing block metal awl round nose plier 2 chain nose pliers flush cutter Vintaj patina: verdigris, jade, moss, antique copper Ranger Vintaj glaze flat tip paint brush non-stick craft sheet heat it craft tool Other paper towel water Completely dry the patina with a heat it craft tool. Hold approximately 3 inches from surface to avoid bubbling. Allow to cool before handling. Use a flat tip paint brush to apply antique copper glaze mixture over patina’d pendant. Wash paint brush with water. Use a paper towel to dry paint brush completely. Allow pendant to dry before handling. 22 2 3 Use a heat it craft tool to speed up the drying time. Hold approximately 3 inches from surface to avoid bubbling. Allow to cool before handling. 4 Use the dark gray side of a metal reliefing block to highlight the raised areas. 5
24 Publizr Home