TEMPORARY DEAD END ARMS Hastings Temporary Dead End Arm enables a line crew to reposition conductors off an existing dead end arm to gain working clearance for reconductoring and terminating the new conductors. Arms are constructed from 3'' diameter fiberglass with a foam core to meet most load requirements for temporary dead ends. The dead end arm load rating has a total working load limit of 500 lbs. per position or 1000 lbs. total working load limit. Arms have 2 bushed holes with 18'' spacing to accommodate 5/8'' diameter hardware bolts for dead ends. Two aluminum sleeves are installed to prevent wear on fiberglass arm. Steel mounting brackets have multiple holes for adjustment to various arm sizes. Arms can be installed on top or bottom of existing cross arms. Two styles are available; Butt Swivel Eye for dead ending a single phase tap line or a Three-Way Aluminum Alloy Equipment Mounting Bracket for mounting a cutout, lighting arrester and dead ending a tap line. When utilizing the Butt Swivel or the Equipment Mounting Bracket for temporary hanging of a tap line; "only" slack spans are recommended with loads "not to exceed" 150 lbs.., providing that the dead end arm is being held captive on the cross arm. HA-7674 HA-7675 HA-7676 HA-7677 HA-11016 3way Bracket, Height Adj: 4-5/8'', 4-7/8'', 6-1/8'', Width Adj: 3-7/8'', 5'', 6-1/8'' Butt Swivel, Height Adj: 4-5/8'', 4-7/8'', 6-1/8'', Width Adj: 3-7/8'', 5'', 6-1/8'' 3way Bracket, Height Adj: 4-5/8'', 4-7/8'', 6-1/8'', Width Adj: 6-1/8'', 7-1/4''', 8-3/8'' Butt Swivel, Height Adj: 4-5/8'', 4-7/8'', 6-1/8'', Width Adj: 6-1/8'', 7-1/4''', 8-3/8'' Conductor Holder for Temporary Dead End Arms, 3'' dia. OD Arms HA-7675 HA-7675-end HA-7674-end 93 LIVELINE Phone: 800•438•0671
94 Publizr Home