TEMPORARY CUTOUT & BYPASS TOOLS CH-PSC6010342 Chance's Temporary Cutout Tool provides fuse protection during liveline maintenance. The cutout tool clamps onto primary conductor with a clamp stick/shotgun. The brass stud at lower end accepts clamp on temporary tap jumper. Insulated bushing and hot parts are from Chance Type C-Polymer Cutouts: upper contact with integral sleet shield and hooks for operation by load break tool and lower trunnion of cast bronze. Fuse tube should be fitted with fuse length rated no larger than 100 amps. Available for 15kV and 27kV systems. Optional with or without pivot-lever closing device. Pivot-lever permits closing by hookstick from side opposite the fuse tube. CH-PSC6010341 CH-PSC6010342 CH-PSC6010345 CH-PSC6010346 Cutout Tool, 15kV Cutout Tool, 25kV Cutout Tool, 15kV, w/Pivot-lever Cutout Tool, 25kV, w/Pivot-lever Utility Solutions patented Jack Jumper™ Cutout Tool permits a safe and quick method to temporarily bypass an overhead cutout without the tedious use of bulky jumper cables. The tool is indispensable for fuse coordination tasks and permits easy bypass of an underground dip. The Jack Jumper™ Cutout Bypass Tool saves time and money, eliminates risk of service interruption and prevents accidental cross phasing. All Jack Jumper™ Cutout Bypass Tools are rated at 100 AMP. Installation and removal is done with a shotgun stick. UT-USJJ-001 UT-USJJ-001 UT-USJJ-002 UT-USJJ-003 UT-USJJ-004 UT-USJJ-005 UT-USJJ-006 UT-USJJ-007 UT-USJJ-008 UT-USJJ-009 15kV, 100 Amp. 27kV, 100 Amp. 15kV ABB Loadbreak Cutout 15kV Chance Loadbreak Cutout 38kV Cutout & S&C SMD-20 15kV Power Fuse S&C SMD-20 38kV Power Fuse S&C SMD-20 27kV Power Fuse 27kV Chance Loadbreak Cutout 27kV ABB Loadbreak Cutout 94 Fax: 704•482•7349 LIVELINE
95 Publizr Home