429 Rasp Blades & Spacers Retread Accessories Retread Consumables Tire Appearance Envelopes WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE RETREADING
430 RETREADING BLADE MATCHING Rasp Blades and Spacers PINCOTT® STANDARD SERIES BUFFING RASP BLADE SPACERS Progressive development of blades capable of higher rates of rubber removal and the use of more powerful and higher speed machines imposed increasingly severe temperature conditions on rasp blades, giving rise to the need for effective cooling to avoid loss of temper in the blade material. ASCOT NO. MFG. NO. 613-00414 613-00418 613-00438 613-04316 613-04516 613-04532 613-00514 613-00518 613-00538 613-53165 613-00614 613-00618 613-00638 613-06316 613-06516 613-06532 DESCRIPTION R4S14DL R4S18SL R4S38DL R4S316SL R4S516DL R4S532SL R5S14DL R5S18SL R5S38DL R5S316SL R6S14DL R6S18SL R6S38DL R6S316SL R6S516DL R6S532SL Available for contoured hubs 1 2 3 Model/Make of Buffer Arbor Hole Size Keyway Size, if any 4 Pin Length 5 6 Rasp Blade Type Hub Type: Non-Spiral, Heavy-Duty, All Purpose or Regular 1/4" Double 1/8" Single 3/8" Double 3/16" Single 5/16" Double 5/32" Single 1/4" Double 1/8" Single 3/8" Double 3/16" Single 1/4" Double 1/8" Single 3/8" Double 3/16" Single 5/16" Double 5/32" Single Allows cross ventilation and cleaning of cut rubber through the rasps head R4 SERIES 28 Blades Per Set R115, 5 SEGMENTS SERIES SINGLE SECTION 1/8", 5/32", 3/16" 25 Blades Per Set P3, 6 SEGMENTS SERIES 30 Blades Per Set SPACERS FOR 9" 4-SEGMENT SPACERS FOR 11.5" 5-SEGMENT ASCOT NO. MFG. NO. 616-00320 616-00325 616-00416 616-00420 616-00425 616-11520 616-11525 PTP3-20 PTP3-25 PTR4-20 PTR4-25 SPACERS FOR 11.5" 6-SEGMENT PINCOTT® DESCRIPTION Fits 11.5" 6-Segment Hubs Fits 11.5" 6-Segment Hubs PTR4 -16 Fits 9" 4-Segment Hubs Fits 9" 4-Segment Hubs Fits 9" 4-Segment Hubs PTR115-20 Fits 11.5" 5-Segment Hubs Fist 11.5" 5-Segment Hubs PTR115-25 RASP BLADES - ULTRA SERIES Unique tooth setting to enhance the strength of the teeth and produce cooler *Other sizes available for contoured hubs and use with smart blades PINCOTT® RASP BLADES - STANDARD SERIES • Exclusive heat treating process • Reduced tooth breakage • Cooler running • Faster material removal • No blade warpage • Lower cost per buffed tire APPLICATION GUIDE Increased material between I.D. of blade and mounting pins to reduce the risk of blade breakage Saturn hub pictured in Bandag setup with 20 each R4S38DL and 4 each R4S316SL. ASCOT NO. MFG. NO. Ultra I Ultra II Ultra III 616-00111 616-00222 616-00333 DESCRIPTION Fits All 11.5", 5-Segmented Hubs Fits All 9", 4-Segmented Hubs Fits All 11.5", 6-Segmented Hubs BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION RETREADING HOW TO ORDER BUFFING HUBS
RETREADING 431 PINCOTT® RASP BLADES - SMART SERIES • Manufactured with a unique sinusodial (wave-like) form which introduces a multidirectional cutting action • Wave-like form creates greater strength in the blade and its teeth • Cutting action produces less drag on the rasp motor, saving you energy HUB FOR EAGLE II • Eagle II for use on most Bandag buffers ASCOT NO. MFG. NO. DESCRIPTION 613-12900 SIDE VIEW FRONT VIEW ASCOT NO. MFG. NO. 616-01155 616-00944 616-01156 Smart I Smart II DESCRIPTION Fits all 11.5", 5-Segmented Hubs Fits all 9", 4-Segmented Hubs Smart III Fits all 11.5", 6-Segmented Hubs 111031 Eagle II 9" Dia., 4" W., 1-1/2" Arbor TURBO HOLE APPLICATION • B & J Rasps can be ordered with Turbo cooling channels producing a significant increase in cooling effect and blade performance. These can be retrofitted to all existing B & J rasps. ASCOT NO. MFG. NO. 616-11400 111400 DESCRIPTION Turbo Hole Application 616-11400 613-12900 EAGLE II BUFFING BLADES HAND RESHARPENING STONE • Used to hone the inside and outside of curved surfaces • Wooden Handle • Fast cutting and long lasting rasps for the best texture in all tire buffing operations • Tested under all conditions with outstanding results 534-80057 ASCOT NO. MFG. NO. 616-11275 121181 BUFFING BLADES • Proven to be the fastest cutting, longest lasting rasps with the best texture for all buffing operations • Can be used in existing Saturn II or R4 hub assemblies • Fast cutting, long life. Same texture from start to finish • QUANTITY: 30 sets per box ASCOT NO. MFG. NO. 616-43912 616-43914 616-43920 616-43921 616-11116 616-01420 616-11521 616-21525 616-43928 616-43940 616-11173 111136 111137 111140 111141 111116 111119 111107 111104 121177 111172 111173 DESCRIPTION TYPE Refill Refill Refill Refill Refill Refill Refill Refill Refill Refill Refill BLADES PER SET Apollo II Apollo III S115-25 S115-20 R-4-25 R-4-20 R-115-20 R-115-25 Patriot II Gemini II/SII Gemini II/R4 28 30 30 30 28 28 25 25 28 28 28 DESCRIPTION Eagle II Refill BLADES PER SET Eagle II refills 28 per set REPLACEMENT PINS FOR ROCKET HUBS • Special convex style hubs used on buffers must be returned to factory for pin replacement ASCOT NO. MFG. NO. 534-80057 819206 DESCRIPTION Hand Resharpening Stone ASCOT NO. 613-43934 613-43935 613-43936 613-43937 613-43938 613-43939 MFG. NO. 111207 111207 111207 111207 111207 111207 613-43940 111205 613-43941 613-43924 613-43943 111206 111208 111208 DIA. LENGTH 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 2-1/2" 3" 3-1/8" 3-1/4" 3-3/8" 3-1/2" 3-3/4" 4" 4-1/2" 5/16" 5" ASCOT NO. 613-43944 613-43945 613-43946 613-43831 613-43813 613-43812 613-43897 613-43814 613-43811 613-43815 MFG. NO. 111208 111208 111208 111208 111203 111203 111201 111202 111204 111204 DIA. LENGTH 5/16" 5-3/4" 5/16" 6" 5/16" 5/16" 1/4" 1/4" 6-1/2" 8" 3" 3-3/8" 1/4" 3-3/4" 1/4" 1/4" 1/4" 4" 6" 8" WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE RETREADING
432 RETREADING REPLACEMENT PINS & SPACERS FOR ROCKET HUBS Rasp Blades and Spacers (cont.) ASCOT NO. MFG. NO. DESCRIPTION R-115 STYLE 613-11205 613-11206 613-11207 613-11301 613-11302 613-11303 616-11304 616-11305 613-11328 613-11329 613-11330 613-11205 613-11206 613-11207 613-11205 613-11206 613-11207 613-11341 613-11342 613-11343 616-11346 616-11347 111205 111206 111207 111301 111302 111303 111304 111305 111328 111329 111330 111205 111206 111207 111205 111206 111207 111341 111342 111343 111346 111347 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long 5/16" Pins / 3-3/8" Long Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer R-115 Aircooled Spacer 3/8" R-115 Aircooled Spacer 1/4" SATURN II STYLE Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long 5/16" Pins / 3-3/8" Long SATURN III STYLE 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long 5/16" Pins / 3-3/8" Long Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer Saturn III Aircooled Spacer 3/8" Saturn III Aircooled Spacer 1/4" PINS FOR EAGLE II HUBS ASCOT NO. MFG. NO. 613-11206 111206 ASCOT NO. MFG. NO. DESCRIPTION EAGLE I STYLE 613-11380 613-11381 613-11382 613-11205 613-11206 613-11383 613-11384 613-11385 613-11205 613-11206 613-11201 613-11202 613-11310 613-11311 613-11312 616-11313 616-11314 111380 111381 111382 111205 111206 111383 111384 111385 111205 111206 111201 111202 111310 111311 111312 111313 111314 Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long EAGLE II STYLE Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long R4 STYLE 1/4" Pins / 3-3/4" Long 1/4" Pins / 4" Long Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer R4 Aircooled Spacer 3/8" R4 Aircooled Spacer 1/4"616-11206 To properly rebuild a Saturn II rasp hub order the following components: QTY. 8 20 4 MFG. NO. 111205 111328 111330 DESCRIPTION 5/16" x 3-3/4" Pins 3/8" I-Beam Spacers 3/16" I-Beam Spacers Note: For optimum performance replace spacers and pins as a set DESCRIPTION Eagle II Long Pins 5/16" SATURN II STYLE AIR COOLED SPACER ASCOT NO. MFG. NO. 616-11365 DESCRIPTION 111365 Saturn II Aircooled Aluminum Spacer 3/8" – 2 Pinholes for Saturn II US Domestic Rasp B & J OUTER SUPPORT SPACERS ASCOT NO. MFG. NO. DESCRIPTION 613-11391 111391 Saturn II Outer Support Spacers (Box of 8) REPLACEMENT SPACERS FOR EAGLE II HUBS ASCOT NO. MFG. NO. DESCRIPTION 613-11383 613-11384 613-11385 111383 111384 111385 Eagle II Spacer (Standard) Eagle II Spacer Eagle II Spacer REPLACING HUBS, PINS & SPACERS 616-11206 WIDTH 3/8" 1/4" 3/16" APPLICATION GUIDE BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION RETREADING
RETREADING 433 ROCKET RASP ROTARY GOUGES PINCOTT® ROTARY GOUGES ASCOT NO. MFG. NO. 613-91501 613-91502 901501 901502 616-11605 ASCOT NO. MFG. NO. 616-11603 616-11604 616-11605 616-11606 616-11610 616-11612 616-16101 616-16102 616-16121 616-16122 810603 810604 810605 810606 810610 810612 810610-1 810610-2 810612-1 810612-2 DESCRIPTION 1-1/4" Dia. Mini No Notch 3/8" 24 THD (3/Set) 1-1/4" Dia. Mini No Notch 3/8" AH (3/Set) 2" Dia. Heavy Wall No Notch 1/2" AH 2" Dia. Heavy Wall No Notch 1/2" AH 2" Dia. Thin Wall No Notch 3/8" AH (2/Set) 2" Dia. Thin Wall Notched 3/8" AH (2/Set) 2" Dia. Thin Wall No Notch 1/2" AH (2/Set) 2" Dia. Thin Wall No Notch 3/8" 24 THD (2/Set) 2" Dia. Thin Wall Notched 1/2" AH (2/Set) 2" Dia. Thin Wall Notched 3/8" 24 THD (2/Set) B & J ROCKET SQUIGGLY RASP • Fast Rubber Removal • No scorching • Easy Control • Long life • No regritting costs 616-82013 ASCOT NO. MFG. NO. 616-82013 616-82014 820103 820104 DESCRIPTION 10 Blades w/ Support Plate (10 per Pack) 24 Blades w/ Support Plate (24 per Pack) 616-11612 613-91503 613-91321 613-91322 613-91207 PINCOTT® 901503 901321 901322 901207 DESCRIPTION 2" Dia. Heavy Wall, 1/2" Arbor Hole (2 per Box) 2" Dia. Heavy Wall, 3/8"-24 Thread Arbor Hole (2 per Box) 2" Dia. Thin Wall, 3/8" Arbor Hole (2 per Box) 1-1/4" Dia. Heavy Wall, 3/8"-24 Thread Arbor Hole (3 per Box) 1-1/4" Dia. Thin Wall, 3/8" Arbor Hole (3 per Box) 3/4" Dia. Thin Wall, 3/8"-24 Thread Arbor Hole (4 per Box) MINI RASPS ASCOT NO. MFG. NO. 539-00005 539-00006 PTP5 PTP6 DESCRIPTION P5 Refill (6 per Box) P6 Refill (6 per Box) Retread Accessories PRECURE SHOP ACCESSORIES MINI RASPS • These Mini Rasps are very efficient when larger amounts of rubber have to be removed quickly, for example in the event of very large repairs they can drastically reduce the required buffout time • Both Mini Rasp versions are available individually or as complete, ready-to-use kits with adapters for use on quick change chucks ASCOT NO. MFG. NO. 539-11075 111075 539-11134 539-11076 539-11133 111134 111076 111133 DESCRIPTION R-5 Rasp Complete (1 Set of R-5 Refills, 6 Alu Washer, NV 11 Adapter R-5) R-5 Refills (1 Set of 5 Pieces) R-6 Rasp Complete (1 Set of R-6 Refills, 7 Alu Washers, NV 11 Adapter R-6) R-6 Refills (1 Set of 6 Pieces) 539-11075 639-11073 539-11076 ASCOT NO. ITEM NO. 639-11081 639-11139 11081F 11139F 639-50806 639-50184 639-42308 639-42312 ED-508C-06 ED-5018C-14 ESBNK-4023-08 SBNK4023-12 DESCRIPTION Duofast Air Stapler F1B-50-16 Bostitch Air Stapler 31, F1B-84-16 Duofast 1/4" Staples (5,000 per Box, 20 Boxes per Case) Duofast 9/16" Staples (5,000 per Box, 20 Boxes per Case) Bostitch 5/16" Staples (10,000 per Box, 20 Boxes per Case) Bostitch 1/2" Staples (10,000 per Box, 10 Boxes per Case) WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE RETREADING
434 RETREADING Retread Accessories (cont.) PRECURE TREAD STAPLES ASCOT NO. MFG. NO. 639-10800 639-02338 639-05010 639-08008 639-05012 11073F ESBNK402310 ED5010C08 EB8008 ED5012C10 NAILHOLE TESTER/SPREADER DESCRIPTION Fasco Staple Gun F1B 80-16 Bostitch 3/8" Staples (10,000 per Box, 20 Boxes per Case) Duofast 5/16" Staples (5000 per Box, 20 Boxes per Case) 20ga Chisel Point 5/16" Staples - Fits Fasco, BeA (10,000 per Box, 24 Boxes per Case) Duofast 3/8" Staples (5000 per Box, 20 Boxes per Case) TEFLON HOSE ASSEMBLIES FOR PRECURE RETREADING SYSTEMS • Teflon hose assemblies in any length are available for all precure tire retreading equipment including Bandag, Harrelson, Vulcan, etc. • Hoses are used inside the chamber for inflating the tire and evacuating the air from the envelope • Hoses are made of an innercore of extruded Teflon and covered with stainless steel braid reinforcement • All hoses have permanent swage-type brass end fittings 1/4"-18 male pipe (NPT) COUPLERS & PLUGS ASCOT NO. MFG. NO. 645-01000 645-00011 1000 11E 645-03000 W-3000HT 645-00321 645-21192 B3HD21Y B3K21192 CST17B DESCRIPTION 1/4" Bandag-Type Coupler Plug Tire Valve Stem Steel Fits 5/16"-32 Ft. High Temperature Washer for 1000 Above HANSEN SPECIAL COUPLER FOR PRESS TYPE MATRIX Coupler (Brass) Plug (Brass) 645-00017 645-00117 645-02014 645-02110 645-01604 645-16171 645-08476 645-00874 645-00812 645-00814 CPST17B 2014EPR 2110EPR 1/4" BANDAG-TYPE COUPLERS/ADAPTERS Chamber Exhaust Coupler (Brass) Chamber Envelope Adapter (Brass) Thin Replacement O-ring Wide Replacement O-ring BH1-60Y4FP BH1-61-711 874-6 874 812 814 PARKER SPECIAL COUPLER MRT Coupler Vacuum Seal MRT Coupler Adapter BAIRD STYLE COUPLERS AND ADAPTERS Straight Thru With 90° Side Exhaust Coupler For Envelope Use 90° Hose Inlet Coupler For Tube .302 Valve Steam Adapter .482 Envelope Adapter ASCOT NO. MFG. NO. 606-57000 606-57001 DESCRIPTION BTT-5700-S Nailhole Tester/Spreader - Steel BTT-5700-SF Nailhole Tester/Spreader - Steel/Fabric • Electric variable speed rotation • Quick change probe heads • Hand and foot operated bi-directional rotation • Auto-stop flaw detection • Visible spark at flaw location • Four air tool ports and two 110V outlets • Accurate flaw detection • Uses standard 110V power • Hand-operated spread and lift • Adjustable work height • Includes medium truck probe PARTS & ACCESSORIES AVAILABLE (SOLD SEPARATELY) 606-57000 645-00017 645-00117 645-01000 645-21192 645-01604 645-08476 645-16171 645-00321 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION RETREADING
RETREADING 435 651-32437 PORTABLE SPRAYING EQUIPMENT • PORTABLE SPRAYER INCLUDES: Pump, 25' x 1/4" airless hose, gun swivel, silver spray gun and tip of choice • Recommended Graco tip #163-415 RETREAD BRUSHES • Used for applying and stippling in cement ASCOT NO. MFG. NO. 653-40082 40082 DESCRIPTION 2" Diameter Stipple Brush McGEE COMPANY ASCOT NO. MFG. NO. 651-32437 651-35462 651-63415 232-437 235-462 163-415 DESCRIPTION 23:1 Cement Sprayer Silver Airless Spray Gun Only Silver Tip, .015" Orifice, 8-10" Fan Width WYCO FLEXIBLE SHAFT MACHINES • TYPICAL APPLICATIONS INCLUDE: Wood or metal finishing, rust or paint removal, auto body sanding, tire buffing, etc. • Many types of accessories are used with these machines, including edge-type grinding wheels, wire brushes, sanding discs, depressed center wheels, tire rasps, sanding drums TACK BANDS FOR SMOOTH, FINE TEXTURE 539-80002 ASCOT NO. MFG. NO. 539-80002 539-80003 539-80012 539-80013 H12 H11 OX2-R OX3-R 539-80003 DESCRIPTION OX2R 2-1/2” OD x 1” W OX3R 2-1/2” OD x 5/8” W 2-1/2" OD x 1" W 1-1/2" OD x 5/8" W 539-80012 539-80013 WHEEL ARBOR-ADAPTERS • For grinding wheels or wire brushes • 9/16"- 18 female thread to fit Wyco handpieces ASCOT NO. MFG. NO. ASCOT NO. 516-00491 516-00492 516-00493 MFG. NO. 49-1 49-2 49-3 516-00494 49-4 516-00495 49-5 516-00496 49-6 516-04914 49-14 CORE CASING & HAND PC. NO. 10R 10R 2R 2R 30R 30R 4R LENGTH (FEET) CORE NO. CASING 5 5 6 6 7 7 7 C-10 C-10 C-2 C-2 C-30 C-30 C-4 K-10 K-10 K-2 K-2 K-30 K-30 K-4 STRAIGHT HAND PC. 3500 3500 3500 3500 551 551 551 516-00305 516-00405 516-00505 516-00605 305 405 505 605 WHEEL WIDTH MALE THREAD FOR GRINDING WHEELS AND OTHER ACCESSORIES 5/8" 1" 1-1/2" 1-1/2" ASCOT NO. MFG. NO. 516-01305 516-01405 305R 405R DESCRIPTION FOR ROTARY RASPS Threaded 3/8" (16 To Fit Rasps) Threaded 1/2" (13 To Fit Rasps) 3/8"–24 1/2"–20 1/2"–20 5/8"–18 WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE RETREADING
436 RETREADING Retread Accessories (cont.) Expandable Hub Assembly EXPANDABLE RIM ASSEMBLIES & REPLACEMENT BELTS EXP. RIM ASSEMBLIES ASCOT NO. 613-39020 613-00436 613-33379 613-28081 613-32769 613-00937 613-28313 613-00938 613-00465 613-32774 613-28271 613-00470 613-00674 EXP. RIM ASSEMBLIES MFG. NO. RIM 309020 12-14" 309962 309963 309942 309140 309150 309952 309202 309211 13-16" 13-16" 14-17" 14-17" 14-17" 14-17" BEAD WIDTH 5" 309030 13-16" 6-3/8" 7-1/2" 11-3/8" 6" 7-1/8" 9-1/4" 11-3/8" 309040 17-20" 6-1/2" 17-20" 8-1/4" 18-20" 7-5/8" 309220 17-20" 13-1/4" 309230 18-20" 16-3/8" REPL. BELTS ASCOT NO. 613-28260 613-00660 613-33382 613-28160 613-32773 613-02701 613-02821 613-02702 613-01653 613-32778 613-33717 613-01332 613-02092 EXPANDABLE HUB REPLACEMENT STEMS REPL. BELTS MFG. NO. 309510 309520 309521 309522 309541 309540 309550 309560 309570 309242 309354 309580 309356 EXP. RIM ASSEMBLIES ASCOT NO. 613-23800 613-00466 613-32822 613-33162 613-25718 613-33093 613-00846 613-00467 613-33564 613-00839 613-00699 613-00705 EXP. RIM ASSEMBLIES MFG. NO. RIM BEAD WIDTH 309602 20-22.5" 8-1/4" 309050 20-22.5" 9" 309183 20-22.5" 11-3/4" 309021 20-22.5" 14-1/2" 7-1/2" 8-1/4" 9" 22-24.5" 22-24.5" 22-24.5" 22-24.5" 22-24.5" 22-24.5" 13-3/8" 14-1/2" 18-1/2" 14" REPL. BELTS ASCOT NO. 309190 309282 309060 309070 309912 309913 309490 23-25" 13-3/8" 309890 27-29" ENVELOPE SEALING RINGS* • Heavy duty Acme Threads • Sliding shield on outer body • Ergonomic handle • Oil-impregnated bushings Locking Stems Shown 613-33092 613-01715 613-32826 613-33007 613-25839 613-33094 613-02533 613-01955 613-33568 613-02516 613-11955 613-02184 REPL. BELTS MFG. NO. 309622 309610 309612 309491 309600 309302 309630 309640 309641 309643 309500 309644 ASCOT NO. MFG. NO. 613-00512 613-09111 613-19111 613-29617 613-29618 900512 309111 30911L 729617 729618 DESCRIPTION Garter Spring 4 Lock 8 Plain Stem Set 12 All Lock Stem Set Steel-Inserted Plain Stem Steel-Inserted Plain Locking Stem POLY EASE RETREAD RELEASE LINER • American made perforated polypylene film is specified to soften at 311°F and melt at 328°F • For low temp bonding chambers • 75 Gauge • Custom widths are also available • High temp film available ASCOT NO. MFG. NO. 634-12027 634-14027 634-15027 634-18027 PP12HD PP14HD PP15HD PP18HD WIDTH LENGTH QTY./BOX WEIGHT/ROLL 26 lb. 30 lb. 32 lb. 33 lb. 12" 14" 15" 18" 2700' 2700' 2700' 2700' 2 2 2 1 538-12900 BANDAG SIDEWALL BUFFING CUP AND BRUSH ASCOT NO. MFG. NO. 538-12900 535-06020 535-03811 RH129 6020 3811 DESCRIPTION 4" Buffing Cup, 3/4" Arbor Hole, SSG 390 Wire Brush, .0118 Wire Size 2" to 3/4" Arbor Hole Adapter Plates ASCOT NO. MFG. NO. 644-12345 644 DESCRIPTION Envelope Sealer Rings “Available Sizes: 14", 15", 16", 16.5", 17", 17.5", 19.5", 20", 22", 22.5", 24" & 24.5" BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION RETREADING
RETREADING 437 STRETCH WICKING PRODUCTS • For use with valve-type envelopes • All 4-ply Retread Consumables JET CUSHION GUM 634-00812 634-00815 634-00820 ASCOT NO. 634-00812 634-00815 634-00820 645-01812 645-01815 DESCRIPTION 8" x 12" Stretch Wicking Pad 8" x 15" Stretch Wicking Pad 8" x 20" Stretch Wicking Pad WKMICH8X12 Michelin Wicking Pad WKMICH8X15 Michelin Wicking Pad QTY./BOX 24 24 24 24 24 • Designed to line skived areas to improve adhesion • Available in multiple widths and thicknesses • Available in black or gr • All sizes sold in approximately 25 lb increments and priced by the pound When ordering cushion gum please specify the curing temperature that you are curing at, the width and thickness of the cushion gum. Please call for more details. STRIPPING STOCK McGEE COMPANY WOVEN ROLL WICKING • For use with non-valve type processes • Full rolls only • Treated with a special release agent to prevent adhesion to the cushion gum 634-05 • Stripping Stock curing temperatures 914, 074, 440 • Free flowing quality stock for stipping edges of tread rubber to cover excess buffed surfaces • APPLICATIONS: Used on sidewalls to improve appearance • 25 lb. box • Available at any gauge & width Please call for more details. JET ROPE RUBBER ASCOT NO. DESCRIPTION 634-05586 Woven Roll Wicking - Green 634-05587 Woven Roll Wicking - Green SIZE 1-1/2" x 180' 2" x 180' • Rubber extruded is rope form • Especially for mini-extruder guns • APPLICATIONS: For filling buzzouts, section repairs, cuts & snags • Available in 1/4" or 3/8" diameters • All sizes sold in approximately 25 lb. increments and priced by the pound RUBBER WICKING PADS • High elasticity compound eliminating tread deformations • Eliminates use of venting poly underneath • Excellent thermal resistance, reducing aging for extended use ASCOT NO. MFG. NO. 634-00115 634-00315 634-00515 DL01-15 DL03-15 DL05-15 48.75" x 6.75" 29" x 5" 634-00115 634-00315 • Use RR074 for repairing with section mold or spotter: 250° - 280° (Regular cure) • Use RR914 for hot or precure retreading: 250° - 320° (High temperature). Fast Cure • Use RR440 for low temperature precure retreading: 200°-250° Please call for more details. 15 15 634-00515 WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE RETREADING 1" Stripping Stock 2" Stripping Stock
438 RETREADING Retread Consumables (cont.) JET RUBBER SOLVENT • Pure Aliphatic Hydrocarbon • Free from oils and impurities • APPLICATIONS: For diluting or thinning heavy viscosity cements and tire paint; For cleaning buffed retread and repair surfaces; For freshening cushion gum and other uncured rubber stocks ASCOT NO. MFG. NO. 633-50105 633-50154 DESCRIPTION CI31-5GAL CI31-54GAL 5-Gallon Container 54-Gallon Container JET BLACK VULCANIZING CEMENT BRUSH TYPE: An excellent repair cement • Contains special additives to bond to exposed cords such as nylon, rayon, fiberglass, polyester & polyaramid • Use within 15 minutes on exposed steel for best adhesion • Superior tack and excellent cured adhesion SPRAY TYPE: An all purpose cement for both hot capping and precure retreading • Also used for repairing • High tack cement • Excellent cured adhesion and provides superior bond and tack • Available in 32 oz. and 54 Gallon ASCOT NO. MFG. NO. 633-83005 633-83015 DESCRIPTION CH03-5GAL CH00-5GAL 5-Gallon Brush Cement 5-Gallon Spray Cement 633-83005 633-50105 Tire Appearance SURE SHOT PRESSURE SPRAYERS • Air pressurized and refillable • Environmentally safe, eliminates aerosol usage • For brake and parts cleaner, penetrating oils, lubricants, degreasers, solvents • MADE IN USA ASCOT NO. MFG. NO. 632-00005 632-00010 632-01002 632-10001 632-02400 DESCRIPTION K-5 K-10 A1002 A1000R M2400S Partial Repair Kit for Model A Sure Shot Sprayers Complete Repair Kit for Model A Sure Shot Sprayers Sure Shot Black Enameled Steel Sprayer w/ Adjustable Nozzle Sure Shot Enameled Steel Sprayer (Red) Anodized Aluminum Sprayer MOLD LUBRICANT (CONCENTRATED) • Release molded retreads with ease and keep molds clean at the same time • This non-flammable, odorless formula allows rubber to flow freely and prevents carbon buildup • Produces a superior satin finish with no staining • Economical concentrate may be diluted with up to 20 parts water to one part lubricant ASCOT NO. 647-24501 647-24505 DESCRIPTION Mold Lubricant (1-Gallon) Mold Lubricant (5-Gallon) 647-24501 632-02400 MADE IN THE USA BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION RETREADING
RETREADING 439 ROBBINS ENVELOPE LUBE • Spray on inside of the envelope, spray on while envelope is hot to dry faster, spray after first cure and then every 30 cures or as needed • Quart container is a convenient spray bottle • Ready to use, no dilution required ASCOT NO. MFG. NO. 647-05611 647-05612 647-05613 5611 5612 5613 DESCRIPTION Robbins Envelope Lube (1-Quart) Robbins Envelope Lube (1-Gallon) Robbins Envelope Lube (5-Gallon) 647-05612 647-05611 ™ NEW LOOK TIRE VENEER • Premium water-based coating with excellent hiding power specifically for retread tires • Revolutionary design applies a matte, rubber veneer finish to the tire's sidewall • Covers and hides all chalk marks • Dries quickly, will not wash off in rain • Ready to use ASCOT NO. MFG. NO. 497-84405 497-84406 NL640 NL55G DESCRIPTION IMI New Look Tire Veneer - 5-Gal Pail IMI New Look Tire Veneer - 55-Gal Drum 497-84405 BLACK-OUT BLACK TIRE PAINT • Ready to use water based black tire paint • Restores the original appearance of retreaded and used tires • Covers crayon marks, scuffs and dirt to give the tire a new fresh look • Works with machine or hand application • Compatible with tire painting machines 497-00005 ASCOT NO. MFG. NO. 497-00005 497-00055 REMA SHINE • Water-based • Excellent for interior plastic and vinyl trim • Deep long-lasting shine • Convenient, ready-to-use formula • Pleasant odor and VOC compliant ASCOT NO. MFG. NO. 395-10100 101000110 DESCRIPTION REMA Shine EXPANDABLE HUB LUBE • Ready-To-Use formula • Quick/easy application • Petroleum/Silicone free • No mess or product build-up on equipment • 70+ tires per application ASCOT NO. MFG. NO. DESCRIPTION 647-00032 EHL-32 Expandable Hub Lube (32 Oz. Spray Bottle) 395-10100 647-00032 DESCRIPTION Blackout-5 Black-Out Black Tire Paint (5-Gallon) Blackout-55 Black-Out Black Tire Paint (55-Gallon) WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE RETREADING
440 RETREADING ENVELOPE APPLICATION Envelopes ACCU FIT II/INNERLOPE INSIDE ENVELOPES ASCOT NO. MFG. NO. 643-40001 643-40002 643-40003 643-40004 643-40005 643-40006 643-40007 643-40008 643-40009 643-40010 643-40011 643-40012 643-40013 643-40014 643-40015 643-40016 643-40017 643-40018 40x8-24.5 40x8-24.5 38x8-24.5 42x8-24.5 42x8-24.5 OUTSIDE TIRE SIZE 4422 4223 4224 4422 4422 44x10-24.5 4423 42x10-24.5 4422 42x10-22.5 4422 44x12-22.5 4522 40X8-22.5 4219 44x10-22.5 4522 42x10-22.5 4422 38x8-22.5 35x8-22.5 40x8-22.5 38x8-22.5 35x8-22.5 42x8-22.5 3822 4224 4224 3822 4422 4023 305/75R24.5 Deep Lug 305/75R24.5 285/75R24.5, 275/80R24.5 12R24.5 11R24.5 12.00R24 11.00R24 455/55R22.5 445/65R22.5 18R22.5 445/50R22.5, 315/80R22.5, 305/85R22.5 425/65R22.5 16R22.5 385/65R22.5 15R22.5 305/75R22.5, 305/70R22.5, 295/80R22.5, 295/75R22.5, 275/80R22.5 275/70R22.5, 265/75R22.5, 255/80R22.5, 255/70R22.5, 245/75R22.5, 235/80R22.5 12.75R22.5, 12R22.5, 10.00R22 11R22.5, 10R22.5 9R22.5 11.00R22 B & J ENVELOPE TESTER • Extremely Fast • Detects the smallest leaks • Positive operation • Easy to install • Simple to use • No maintenance required! • Organize and store envelopes conveniently • Mobile, can be moved around the shop wherever needed • Sturdy and easy to maneuver • Color-coded handle grips available to organize envelopes by size • Easy assembly • CART HEIGHT: 39.75" • BASE DIAMETER: 47.83" • LOAD CAPACITY: 1,000 lb. 643-40020 643-40021 643-40022 643-40023 643-40024 643-40025 643-40026 643-40027 643-40028 643-40029 643-40030 643-40031 643-40032 643-40033 643-40034 643-40035 643-40036 643-40037 Envelope Spreader Available. Call for Details. APPLICATION GUIDE ASCOT NO. MFG. NO. 643-40019 42x10-20 42x8-20 44x12-20 40x8-20 42x10-20 38x8-20 35x8-20 35x8-19.5 32x8-19.5 29x7-19.5 29x7-19.5 29x7-17.5 35x8-17.5 32x8-17.5 31x6-17.5 29x7-16 27x5-16 OUTSIDE TIRE SIZE 4422 4423 4522 4224 4422 4023 3822 3521 3521 3218 3218 3117 3822 3521 3218 3218 2916 10.00-15 HB 3521 8.25-15 HB 3218 365/80R20 14/80R20 14.00R20 13/80R20, 11.00R20, 10.00R20 12.00R20 9.00R20 8.25R20 305/70R19.5 285/70R19.5, 265/70R19.5, 24570/R19.5 225/70R19.5 8R19.5 245/70R17.5, 215/75R17.5 11R17.5 10R17.5, 9.5R17.5, 9R17.5 7.50-17 245/75R16, 235/85R16, 215/85R16, 7.50R16 225/75R16 10.00R15 8.25R15 649-83340 ASCOT NO. MFG. NO. 649-83340 833400 DESCRIPTION B & J Envelope Tester ASCOT NO. MFG. NO. 649-40100 840100 DESCRIPTION Envelope Storage Cart BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION RETREADING
1 Publizr