LIFTING EQUIPMENT 146 Wheel Dollies 1/2-TON CAPACITY HYDRAULIC WHEEL DOLLY • For the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level • Heavy duty lift arms made with ball bearing conveyor rollers allow easy rotation of wheels for alignment with bolt pattern • 7-1/2" of side-to-side lift arm adjustment eliminates the trial and error method of aligning the rim’s lug holes with the wheel drum • A 1500-pound capacity heavy duty winch with 5-to-1 gear ratio provides ease of operation • The winch gear design acts as a brake and allow the load to be lowered incrementally if desired and without the need of constant hand pressure against the crank handle • A hydraulic jack tilts the lift arms in order to match the angle of the spindle • Safety chain provided to secure tires and wheels to the dolly • Maneuverability is made easy by means of two rear mounted ball bearing swivel caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving • Perfect for use with truck lifts • ASSEMBLED IN THE USA • 82304 includes air-operated pump that allows the unit to lift the load effortlessly ASCOT NO. 407-82304 MFG. NO. 82304 CAP. (TONS) 1/2 LIFT RANGE 2-1/8" - 39-1/2" TILT RANGE -2°-30° LIFT ARM SIZE 30-7/8" x 22-1/8" SIDE TO SIDE ADJ. 2-1/2" (Left), 4-1/2" (right) PRODUCT SIZE (W X D X H) 49-5/8" x 44-5/8" x 69-7/8" WT. (LB.) 476 3/4-TON WHEEL DOLLY • For handling of dual wheels and large single wheels MADE IN THE USA • Designed to facilitate the removal and installation of pneumatic tires and wheel assemblies found on many trucks, buses and trailers • Handles up to 52” diameter tires and wheels • The frame is constructed from heavy gauge welded tubular steel for maximum strength and durability • Load levelers aid alignment • Carriage arm rollers with self-lubricating bearings • Restraining chain with the unit to secure the load • 2 swivel ball bearing casters for easy positioning • Wide frame and lifting carriage • Handy tool/parts tray on frame • The wheel dolly is designed to be used in conjunction with jacks and jacks stands • 2 Year Warranty CAP. ASCOT NO. 407-93766 MFG. NO. HW93766 (TONS) 3/4 LIFT RANGE ARM LENGTH / SPREAD 23" / 26-1/2" 4" - 9" OVERALL SIZE (W X D X H) 39-1/2" x 38-3/4" x 32" 407-93766 WT. (LB.) 118 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT
35 Publizr Home