0

111 Bottle Jacks Service Jacks Jack Stands Specialty Jacks Transmission Jacks Wheel Dollies Vehicle Stands & Accessories Shop Cranes WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

LIFTING EQUIPMENT 113 ® PROFESSIONAL LIFTING EQUIPMENT Portable Bottle Jacks 2, 3, 5 AND 8-TON CAPACITY BOTTLE JACKS • For heavy duty truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting, pushing, spreading, bending, pressing, or straightening are required • Two piece zinc plated handle • Prevent rust with “Parkerized” pump piston, ram and extension screw • No leak “Uniweld” construction • 50% safety overload factor • State of the art design reduces repair time • Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances • Lightweight forged base provides more steel only where strength is required • The heavy-duty extension screw and release valve were designed to eliminate parts and reduce the chances of breakage and excessive wear • Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard • Made in Japan 12 AND 20-TON CAPACITY AIR/ HYDRAULIC BOTTLE JACKS • Fast efficient air pump reduces lifting time and has a built-in relief mechanism which preven jack from being used beyond its maximum c • Convenient push button air valve connect in-line filter prevents contaminates from entering the air/hydraulic system • Unique design allows for manual operation when air is not available • Two piece zinc plated handle • Parkerized coating on pump piston, extension screw and extension adapters and chrome coated ram offer protection against rust • Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances • Safety oil by-pass system prevents the ram from being overextended and causing damage to the cylinder • Made in Taiwan HEAVY DUTY ASCOT NO. MFG. NO. 301-76312 301-76320 301-76720 301-76721 76312B 76320B 76720B 76721A 12 20 20 20 10-7/8" 8-1/4" 7-3/4" 19-3/4" 20-1/2" 14-1/2" 11-3/4" 23.5" 23.5" 23.5" 23.5" 12 AND 20-TON CAPACITY BOTTLE JACKS • Contains same features as the 2, 3, 5 and 8-ton capacity bottle jacks • Carrying handles • Made in Japan CAPACITY (TONS) MIN. HEIGHT MAX. HEIGHT 9-15/16" HANDLE LENGTH HEAVY DUTY ASCOT NO. 301-76502 301-76503 301-76505 301-76508 MFG. NO. 76502B 76503B 76505B 76508B CAPACITY (TONS) 2 3 5 8 MIN. HEIGHT MAX. HEIGHT 7-1/8" 14-1/2" 7-1/2" 9-1/16" 9-1/16" 15 19/16" 18-7/8" 18-3/4" LIFTING HANDLE No No No Yes ASCOT NO. MFG. NO. 301-76412 301-76512 301-76520 301-76820 76412B 76512B 76520B 76820B CAPACITY (TONS) 12-1/2 12-1/2 22 22 MIN. HEIGHT MAX. HEIGHT 9-7/16" 6-11/16" 10-13/16" 8-1/4" 18-7/8" 13-3/16" 20-3/16" 14-15/16" LIFTING HANDLE Yes Yes Yes Yes WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

114 LIFTING EQUIPMENT Portable Bottle Jacks (cont.) ® PROFESSIONAL LIFTING EQUIPMENT 35 AND 60-TON CAPACITY BOTTLE JACKS • For heavy duty truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting, pushing, spreading, bending, pressing, or straightening are required • Two piece zinc plated handle • Prevent rust with “Parkerized” pump piston, ram and extension screw • No leak “Uniweld” construction • 50% safety overload factor • State of the art design reduces repair time • Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances • Lightweight forged base provides more steel only where strength is required • The heavy-duty release valve was designed to eliminate parts and reduce the chances of breakage and excessive wear • Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard • Made in Japan 12 AND 22-TON CAPACITY LOW FORGED STEEL BASE BOTTLE JACKS • Welded steel construction throughout - reduces metal fatigue allowing for longer use life • Unique base forging method increases resistance to high pressure and gives a degree of durability • Special type of steel resists rust • Needle valve allows for controlled lowering of the ram • Casing, cylinder and base are joined by electric welding for greater strength and are leak proof • Heat treated extension screw provides low pickup height adjustment, maximum lift height and extra strength HEAVY DUTY WELDED STEEL HEAVY DUTY 301-02200 TWO-PIECE ZINC PLATED HANDLE 301-02201 301-01220 301-76535 ASCOT NO. 301-01220 301-02200 301-76560 ASCOT NO. MFG. NO. 301-76535 301-76560 76535 76560 CAPACITY 35-Ton 60-Ton MIN. HEIGHT MAX. HEIGHT 17-5/16" 11" 12" 18-11/16" LIFTING HANDLE Yes Yes 301-01201 301-02201 ZNB-12 12-Ton 6-3/4" ZNB-22 22-Ton 7-1/8" MFG. NO. MIN. CAP. HEIGHT MAX. HEIGHT STANDARD ZN-12 12-Ton 9-1/2" 18-1/2" 5-7/8" 3-1/8" ZN-22 22-Ton 10-5/8" 20-1/8" 6-1/4" 3-1/4" LOW 13-3/8" 3-3/4" 12" 3" 3-3/8" 1-1/2" 4-1/8" x 6-1/2" 5 x 7-1/8" 15 lb. 27 lb. 4-1/8" x 6-1/2" 5" x 7-1/8" 18 lb. 30 lb. RAM LIFT SCREW EXT. BASE SIZE SHIP WT. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 115 12 & 20-TON IN-LINE WELDED BOTTLE JACKS WELDED • Welded cylinder and reservoir for added strength and durability • Chrome plated rams to resist rust and wear • Built-in by-pass device to protect hydraulic system from over pumping damage 301-61124 301-61200 CYLINDER & RESERVOIR 301-61120 ASCOT NO. MFG. NO. 301-61120 301-61124 301-61200 61120 61124 61200 CAPACITY 12 Tons 12 Tons 20 Tons MIN. HT. MAX HT. 9-3/8" 6-3/4" 10-1/2" 18-5/8" 13-3/8" 20-1/2" HANDLE LENGTH OVERALL LENGTH OVERALL WIDTH 18-7/8" 18-7/8" 18-7/8" 6-1/2" 6-1/2" 7-1/2" 4-3/8" 4-3/8" 5-1/8" SADDLE DIAMETER SHIPPING WT. 1-1/2" 1-1/2" 1-3/4" 18.9 lb. 15.4 lb. 28.1 lb. 20-TON AIR/HYDRAULIC SHORTY BOTTLE JACK • Welded cylinder and reservoir for added strength and durability • Chrome-plated rams to resist rust and wear • Built-in bypass device to protect hydraulic system from over-pumping damage • Self-returning spring for ease of operation • Built-in muffler to promote quiet operation • Built-in in-line air filter for extended motor life • High speed turbo motor for efficient, effortless operation • ¼" quick connect feature allows for ease of mobility and remote operation BUILT-IN BYPASS DEVICE AIR/ HYDRAULIC ASCOT NO. MFG. NO. 301-61207 61207 CAPACITY 20 Tons MIN. HT. MAX. HT. 8-1/4" 15/1/2" HANDLE LENGTH OVERALL LENGTH OVERALL WIDTH 18-7/8" 9-1/4" 6-7/8" SADDLE DIAMETER 1-3/4" SHIPPING WT. 34 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

116 LIFTING EQUIPMENT Portable Bottle Jacks (cont.) HYDRAULIC AIR-ACTUATED BOTTLE JACKS • Effortless air operation will greatly reduce operator fatigue and speed up the efficiency of garage work • All air bottle jacks come with chrome plated rams • A compact, yet powerful Air Turbo • The motor is equipped to raise the load to the desired height efficiently, effortlessly and safely • Versatile “Quick Connector” design provides for easy removal of air hose from air motor allowing compact storage or remote operation HYDRAULIC SIDE PUMP BOTTLE JACKS • Hydraulic system is protected from internal damage by a patented bypass mechanism • Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance • Fabricated from hard-cast steel with heat-treated critical stress areas • Unique cross-type forged release valve assures positive control • A wide, rugged base provides stability and strength ASCOT NO. EFFORTLESS AIR OPERATION CHROME PLATED RAMS 301-10125 301-10129 MIN. MFG. NO. CAP. HEIGHT 10129W 12 6-1/2" 301-10205 10205W 20 9-3/4" MAX. HEIGHT 10125W 12 9-1/2" 18-5/8" 11" HYD. HEIGHT 6" 3" EXT. SCREW 3-1/8" 1-1/2" 18-1/2" 5-1/2" 3" 209W 20 6-5/8" 11-5/8" 300 30-Ton 11" 18" 3 7" 10500 50-Ton 9-1/2" 13-7/8" 4-3/8" 1-3/4" n/a n/a BASE SIZE 6" x 5-3/8" 5-1/4" x 5-1/8" 6-1/8" x 5-7/8" 6" x 6-1/2" 8-1/8" x 6-7/8" 10-3/4" x 7-5/8" 56 103-1/2 14 28 21 WT. (LB.) 18 301-10120 ASCOT NO. 301-18126 301-18204 301-18206 301-18209 301-18302 301-18502 301-18992 MFG. NO. MIN. CAP. 18204C 20-Ton HEIGHT 18126C 12-Ton 9-5/8" 10" MAX. HEIGHT HYD. HEIGHT 18-7/8" 5-1/2" EXT. SCREW 6" 18-3/4" 4-7/8" 3-7/8" 18206C 12-Ton 9-5/8" 19" 18302C 30-Ton 11" 18502 50-Ton 12" 18992 18" 19" 100-Ton 11-7/8" 17-7/8" 5" 7" 7" 6" 6" 18209C 20-Ton 8" 15-1/2" 4-1/8" 3-1/4" N/A n/a n/a BASE SIZE 8" x 5-1/4" 8-1/2" x 7-1/8" 9" x 7" 8-1/2 x 7-1/4" 10-1/4" x 8-1/4" 10-7/8" X 7-3/8" 12-3/4" X 9-3/8" 34 37 37 63 301-10200 10200 134-1/2 220-1/2 301-10208 10208 20-Ton 6-1/2" 11-1/4" 3-1/4" 1-1/2" 20-Ton 9-1/2" 18-5/8" 6" 3-1/4" ASCOT NO. 301-10120 MFG. NO. MIN. CAP. HEIGHT MAX. HEIGHT 10120 12-Ton 9-1/2" 18-5/8" HYD. HEIGHT 6" EXT. SCREW 3-1/8" BASE SIZE 7" x 4-1/4” 7-3/4" x 5-1/4" 7-3/4" x 5" 21 27 WT. (LB.) 19-1/2 WT. (LB.) 27 ULIC IN-LINE ACKS ed extension s low pick-up height t and maximum lift height , rugged base provides stability and strength • Easiest accessible pumping system eliminates off-center pumping force for the most efficient operation • U.S. Patented built-in by-pass device protects hydraulic system from over pumping damage • Unique cross-type forged release valve assures positive control 301-10208 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 117 2 TO 30-TON CAPACITY BOTTLE JACKS • All models have a chrome main ram and a chrome pump piston • The extension screws have a pressed thread • These units can be used horizontally and vertically CHROME PUMP PISTON CHROME MAIN RAM LOW PROFILE AIR B • Low Profile Jack with a 20-Ton capacity • T includes a welded base to prolong service • Comes equipped with a chrome main ram and aluminum air mot guarantee optimum lifetime • Air filter and air regulator connec to a hose included 301-43202 WELDED BASE ASCOT NO. MFG. NO. 301-43202 G432021 CHROME MAIN RAM EXT. CAPACITY 20-Ton MIN. HEIGHT MAX. HEIGHT 5-3/4" 10-5/16" SCREW 1-3/4" 301-41020 301-41040 20-TON AIR/HYDRAULIC BOTTLE JACK • This 20-Ton Capacity jack is one of the toughest in the market • Each unit comes equipped with an air regulator, a chrome ram and welded base so that it will keep on working no matter the job • Each unit is hand-tested before shipping to guarantee maximum reliability 301-41200 MIN. ASCOT NO. MFG. NO. 301-41020 301-41040 301-41060 301-41080 301-41150 301-41200 301-41201 301-41300 G410200 G410400 G410600 G410800 G411500 G412000 G412001 G413000 CAPACITY 2-Ton 4-Ton 6-Ton 8-Ton 15-Ton 20-Ton 20-Ton Short 30-Ton HEIGHT 6-1/4" 7-1/2" 7-3/4" 9" 9-3/4" 9-1/2" 6-1/2" 9-1/2" 301-41300 MAX. HEIGHT 11-3/4" 14-1/2" 14-3/4" 18" 19-1/4" 18-1/2" 11-1/4" 18-1/2" EXT. SCREW 2" 2" 2" 3-1/4" 3-1/4" 3-1/4" 1-1/2" 3" WELDED BASE CHR EXT. ASCOT NO. MFG. NO. 301-43220 G432020 CAPACITY 20-Ton MIN. HEIGHT MAX. HEIGHT 9-3/4" 18-1/2" SCREW 3-1/4" WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

118 LIFTING EQUIPMENT Portable Bottle Jacks (cont.) 20-TON AIR/HYDRAULIC BOTTLE JACK • 90-180 PSI • Factory pre-tested to 150% of rated capacity • Safety bypass system • Dual ram return springs • Saddles are machinehardened steel • Expertly crafted in accordance with the strictest industry standards • Made to ensure the highest level of quality and value MAX. ASCOT NO. MFG. NO. 302-55200 CAPACITY 5520B 20-Ton BASE SIZE 9-1/2" x 6-1/2" MIN. HEIGHT 10-1/2" HEIGHT 20" LIFT 6-1/4" EXTERNAL SCREW WT. (LBS) 3-7/8" 39 lb. JACK PLATES • SIZES AVAILABLE: 12" x 12" x 1" and 18" x 18" x 1" • 100-ton capacity for both sizes • Provides stability to bottle jacks, hydraulic rams, jack stands and cribbing • Non-skid surface • Constructed of engineered thermoplastic material • MADE IN THE USA MADE IN THE USA 12, 20 AND 30-TON CAPACITY SUPER DUTY AIR/HYDRAULIC BOTTLE JACKS • Welded tank and frame for superior strength • Thick base design provides the most stable lifting platform • Dual return springs help provide controlled and easy descent • Shielded release screw prevents accidental lowering • Specially engineered air motor for consistent and reliable operation 309-12121 301-05621 301-05612 309-18181 301-05620 301-05630 ASCOT NO. MFG. NO. 309-12121 D1212 309-18181 D1818 DESCRIPTION 12" x 12" x 1" Jack Plate 18" x 18" x 1" Jack Plate AIR ASCOT NO. MFG. NO. 301-05612 301-05620 301-05621 301-05630 5612SD 5620SD 5621SD 5630SD CAPACITY 12-Ton 20-Ton 20-Ton 30-Ton MIN. HEIGHT 9-23/25" 10-37/100" 7" 10-47/50" MAX. HEIGHT 18-49/50" 20-63/100" 12-3/4" 20-59/100" LIFT 5-91/100" 6-19/50" 3-7/20" 5-91/100" BASE SIZE 8-27/100" x 5-31/100" 5-3/4" x 9" 5-7/10" x 8-27/100" 9-13/20" x 7-9/100" PRESSURE 110-120 PSI 110-120 PSI 110-120 PSI 110-120 PSI AIR INLET FITTING 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT WT. (LBS) 35 45 36 65 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 119 301-14460 TITAN AIR/HYDRAULIC BOTTLE JACKS • Cylinder is welded to the base, assuring strength and eliminating leaks • Chromed pump piston and ram for added rust resistance • Extension screw gives added height when necessary • Super low minimum height for easy access ASCOT NO. MFG. NO. 301-14460 301-14461 301-14475 301-14480 CAP. 14460 20-Ton 14464 20-Ton 14475 30-Ton 14480 50-Ton MIN. HEIGHT MAX. HEIGHT WT. (LB.) 9-3/4" 5/8" 11" 12" 18-1/2" 10' 18" 19" 38 21 60 138 TITAN JACK PLATES • Each unit has non-skid surface to prevent jacks from sliding under wet or oily conditions • When it is necessary to provide a firm foundation, the base of the jack shall be blocked or cribbed • Lightweight and easy to handle ASCOT NO. MFG. NO. 309-14464 309-14465 309-14466 309-14468 309-14472 309-14473 309-14462 309-14463 309-14469 14464 14465 14466 14468 14472 14473 14462 14463 14469 DIMENSIONS 12” x 12” x 1” 12” x 12” x 1.5” 18” x 8” x 3” 24” x 24” x 2” 18” x 18” x 1” 18” x 18” x 1.5” 36” x 36” x 2.5" 36” x 36” x 3” 18” x 18” x 2” CAPACITY 50-Ton 100-Ton 200-Ton 100-Ton 50-Ton 100-Ton 150-Ton 200-Ton 100-Ton WT. (LB.) 5 8 21 24 15 16 118 135 20 NONSURF 309-14466 GRIP-IT SERIES JACK PLATES • New pyramid surface on one side is designed to mate with Super Stacker Cribbing Blocks pyramid surface for secure, exact fit, as well as provide better grip onto uneven terrain in the field • Provides increased stability and gripping surface • Complies with OSHA regulation 29 CFR 1926.305 • CAPACITY: 100 tons • Model 14503 bottom locking plate locks onto Super Stacking Cribbing, helping to secure the load while preventing the release of hazardous energy ASCOT NO. MFG. NO. 309-14500 309-14501 309-24468 309-14503 14501 TYPE 14500 Standard Plate Standard Plate 14468B Standard Plate 14503 Bottom Locking Plate DIMENSIONS CAPACITY WT. (LB.) 12" x 12' x 2" 100-Ton 12" x 24' x 2" 24" x 24' x 2" 27" x 24" x 2" 100-Ton 100-Ton 100-Ton 8.8. 17.8 36.3 38.4 309-14503 Shown with Super Stacker PYRAMID SURFACE ON WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

120 LIFTING EQUIPMENT Service Jacks 20-TON AIR/HYDRAULIC BOTTLE JACKS • Thick jack base provides exceptional support and stability in severe conditions • Quick-connect feature on air valve allows easy disconnect and connection of air hose & more compact storage 22-TON AIR/HYDR • Large air mot quick lifting e • Narrow chas • Comes with thr that cater t 301-20220 302-19150 301-20221 ASCOT NO. MFG. NO. 301-20220 301-20221 302-19150 AS2022 AS2022S AS1915 DESCRIPTION 20-Ton Air/Hydraulic Bottle Jack MIN. HGT. MAX HGT. 10-1/8" 19-7/8" 20-Ton Short Air/Hydraulic Bottle Jack 7" 22-Ton Air/Hydraulic Truck Jack 12-5/8" 10-1/2" 21-1/8" HYD. LIFT RANGE 6-1/2" 3-3/8" 6-1/8" EXTEN. SCREW 3-1/8" 2-3/9" 4-1/2" CHASSIS SIZE N/A N/A N/A SADDLE SIZE HANDLE LENGTH N/A N/A N/A 9-3/8" 9-3/8" 45-1/4" SHIP WT. (LBS) 35.1 30.6 101.9 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 121 HEAVY STEEL FOOT FLOOR JACKS • Double pump design for quick lifting and improved efficiency • Heavy steel construction for maximum durability • Equipped with a foot pedal to allow for hands free positioning CONSTRUCTION PEDAL FOR POSITIONING 302-05602 302-05613 302-05605 302-05614 ASCOT NO. MFG. NO. 302-05601 302-05602 302-05613 302-05605 302-05614 AS5601 AS5602 AS5613 AS5605 AS5614 DESCRIPTION Ascot 2-Ton Low Floor Jack Ascot 2-1/2-Ton Floor Jack Ascot 3-Ton Floor Jack Ascot 3-1/2-Ton Floor Jack Ascot 4-Ton Floor Jack MIN. HGT. MAX HGT. 2-3/4" 24" 3-1/8" 19-3/4" 3-3/8" 24-1/4" 3-3/4" 20-1/2" 4-3/8" 20-1/4" HYD. LIFT RANGE 21-1/4" 16-5/8" 20-7/8" 16-3/4" 16" EXTEN. SCREW N/A N/A N/A N/A N/A CHASSIS SIZE 31.9" x 14" 26.3" x 13.5" 31.4" x 14.4" 27.2" x 14.25" 27.7" x 14.4" SADDLE SIZE 3-7/8" 4-3/8" 3-7/8" 4-1/4" 4-1/4" HANDLE LENGTH 47-7/8" 47-7/8" 47-7/8" 47-7/8" 47-7/8" SHIP WT. (LBS) 102.3 73.7 105.4 100 102.5 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

122 LIFTING EQUIPMENT RPG 3.5-TON SERVICE JACK 302-62035 • Quick-lift dual-pump design makes it easy to reach the lifting point under your car • Safety bypass system for cylinder protection • Industrial grade casters for easier transportation • Double pump piston to decrease required strokes needed to reach chassis • Sturdy, one-piece handle • Foam handle for vehicle protection • Bolt-on reinforced and heavy duty lift arm axle • Heavy duty chassis for increased strength and durability • Universal joint mechanism • Protective saddle pad to prevent damage to the vehicle SERVICE JACK SPECIFICATIONS ASCOT NO. 302-62035 MFG. NO. 62035 CAPACITY (TONS) 3-1/2 MIN. HEIGHT / MAX. HEIGHT 3-3/4" / 21-3/4" HANDLE LENGTH 50-1/2" OVERALL LENGTH 31-1/8" OVERALL WIDTH 15-1/2" SADDLE DIAMETER 4-3/4" SHIPPING WEIGHT 104.5 lb. MAGIC LIFT™ SERVICE JACKS & LONG CHASSIS SERVICE JACKS 302-27036 • Innovative design of Magic Lift offers a quicker lift for professional performance • Metered release system allows for precise load control • After the first pump reaches the lifting point, the jack continues with extraordinary lifting speed to raise the load to the desired height • Heavy gauge construction with rugged universal joint release valve for professional performance • U.S. Patented built-in by-pass device protects hydraulic system from over pumping damage • 27025, 27036 & 25036 come with a one-piece handle SERVICE JACK SPECIFICATIONS ASCOT NO. 302-25057 302-25055 302-27035 302-27036 MFG. NO. 25057 25055 27035 27036 ! CAUTION BUYER'S GUIDE CAPACITY (TONS) 5 2-1/2 3-1/2 3-1/2 MIN. HEIGHT/ MAX. HEIGHT 6-3/8" / 21-1/2" 3-1/2" / 20" 4" / 21-5/8” 4" / 21-5/8” HANDLE LENGTH 47-1/4" 45-1/2" 50" 50" SADDLE DIAM. 5-7/8" 4-1/2" 4-3/4" 4-3/4" JACK SIZE 52-5/8" x 18-3/8” 13-1/4" x 26-1/2" 30-7/8" x 14-7/8” 30-7/8" x 14-7/8” Service jacks are for lifting vehicles only. Support the vehicle with vehicle stands immediately after lifting. Do not move or dolly the vehicle with the jack. Use only on a hard level surface. Always follow the instructions accompanying the product for safe and proper use. JACK HGT. WEIGHT (LB.) 7-1/4" 6-1/8" 7-1/4" 7-1/4" 205 70 106.5 106.5 ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 123 3-TON ALUMINUM SERVICE JACK • All aluminum structure provides strength and stability • Side frame handles allow for easy carrying • Extra wide wheels designed for ALL ALUMINUM STRUCTURE 1-1/2-TON HYDRAULIC LOW PROFILE MAGIC LIFT SERVICE JACK • Extra long low side frames designed for long reach under the car chassis • Innovative design of Magic Lift offers a quick lift for professional performance y under trol ther plug 302-29013 302-26030 SERVICE JACK SPECIFICATIONS ASCOT NO. 302-26030 302-29013 MFG. NO. 26030 29013E CAPACITY (TONS) 3 1/1/2002 MIN. HEIGHT/ MAX. HEIGHT 4" / 18-1/8" 2- 1/2" / 19- 7/8" HANDLE LENGTH 47-3/4" 52- 1/4" SADDLE DIAM. 4-1/2" 5.00" JACK SIZE 26" x 13-1/4 49 -1/2" X 15 - 3/4" JACK HGT. WEIGHT (LB.) 6-1/4" 64 7 - 1/4" 150 2-TON LOW-RIDER FLOOR JACKS • Super low pickup height of 2-3/4" • Equipped with a double pump design to increase speed without compromising performance • Universal joint technology and precision release valve for a more controlled release • Safety valve prevents overload • Tough UV powder coated frame for greater protection and durability • Pinned steel saddle (1" stud) with rubber pad for added vehicle protection and durability • One-piece foam covered 50" handle for ease of positioning, pumping and storage 3.5-TON CAPACITY PR HEAVY DUTY FLOOR J • Pinned steel saddle (1-1/8" stud) with rubber pad for added vehicle protection • Rear-mounted 2-3/4" swivel casters for ease of maneuverability • One-piece 50-1/4" padded handle parks upright • Handle ships separately • Equipped with a double pump design to increase speed without compromising overall performance of the jack • Second volume pump assists in getting the saddle to load much quicker than most other single pump designs on the market today 302-00200 FLOOR JACK SPECIFICATIONS ASCOT NO. 302-00200 302-35002 MFG. NO. 200T 350SS CAPACITY (TONS) 2 3-1/2 MIN. HEIGHT / MAX. HEIGHT 2-3/4" / 20" 4" / 19-1/2” LENGTH 27" 29" WIDTH REAR) WEIGHT (LB.) 99 15" 15" 120 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

124 LIFTING EQUIPMENT Service Jacks (cont.) 2 AND 3-TON SERVICE JACKS • One-piece handle • Flanged side plates increase strength • In-line pump provides efficient pumping operation • Full swivel rear casters for easy positioning • Sealed hydraulic pump for durability • Pressure relief valve prevents overloading • Cast iron lift arm for heavy duty loads • U-joint release mechanism for precise load control • 2 Year Warranty 4 AND 10-TON LONG CHASSIS SERVICE JACKS • Dual piston action provides speed to contact and power to lift • Long chassis for hard to reach points • Handle adjusts to three pumping positions • Heavy gauge, steel frame helps prevent distortion • “T” handle with release knob for exact positioning of load • 2 Year Warranty ONE-PIECE HANDLE DUAL PISTON ACTION CAST IRON LIFT ARM LONG CHASSIS T-HANDLE WITH RELEASE KNOB MADE IN THE 302-93642 USA 302-93662 302-93652 SERVICE JACK SPECIFICATIONS ASCOT NO. MFG. NO. 302-93642 302-93652 302-93657 302-93667 302-93660 302-93662 CAPACITY (TONS) HW93642 HW93652 HW93657 HW93667 HW93660 HW93662 2 3 4 4 10 10 MIN. HEIGHT / MAX. HEIGHT POWER RAISE 4 -1/2" / 20" 5-1/4" / 23-1/2" 5-1/2" / 26-1/2" 5-1/2" / 26-1/2" 6-1/2" / 25-1/2" 6-1/2" / 25-1/2" 15-1/2" 18-1/2" 21" 21" 19" 19" SADDLE DIAM. 6 -1/4" 6 -3/4" 7" 7" 8-1/2" 8-1/2" HANDLE LENGTH 48" 48" 51-3/4" 51-3/4" 53" 53" CHASSIS SIZE / HEIGHT 28-1/2" x 15" / 6-3/4" 31-1/2" x 15" / 7-14" 48" x 14-1/2"/8" 48" x 14-1/2"/8" 54" x 20-1/2"/9-1/2" 54" x 20-1/2"/9-1/2" WT. (LB.) 99 123 222 237 420 430 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 125 GT3.0 GARAGE JACK GARAGE JACKS • This 3-ton high-quality jack is designed to offer maximum performance with a sleek and professional look • Low profile • Fast reach foot pedal • Double Piston Fast Lift Technology • Nylon wheels • Controlled descent • The professional universal joint release valve makes it possible to lower the jack with load very precisely • The pump piston (protected with jacket to prevent from intrusion of dirt) is placed at a 45° angle so a complete pumping stroke will always be utilized • The jack has a chrome main ram UNIVERSAL JOINT RELEASE VALVE CONTROLLED DESCENT CHROME MAIN RAM 302-42030 LOW PROFILE 302-42032 302-42225 ASCOT NO. MFG. NO. 302-42003 G420330 302-48301 302-42021 302-42025 302-42030 ASCOT NO. MFG. NO. 302-48301 GT3.0 CAPACITY (TONS) 3-Ton Turbo Lifter Garage Jack MIN. HGT. / MAX. HGT. 3-3/4" x 20" WT. (LB.) 95 302-42250 G422500 302-42031 302-42032 302-42033 302-42225 G420251 G420250 G420300 G420331 G420302 G420303 G420225 CAPACITY (TONS) 3-Ton Turbo Lifter Garage Jack 2-Ton 3-Ton Fast Lift (Double Piston) 3-Ton 3-Ton (Economic) 3.3-Ton (Turbo Lifter) 2.25-Ton Long Chassis (Low Profile) 2.5-Ton (Low Profile) MIN. HGT. / MAX. HGT. 4-3/4" / 17-3/4" 2-15/16" / 20-1/16 " 2-Ton (Low Profile) 2-15/16" / 20-1/16 " 4" / 19-1/2" 4-3/4" / 17-3/4" 5" / 19-1/2" 5-1/8" / 19-5/16" 3-1/2" / 20-1/4" 3-1/4" / 18-1/2" WT. (LB.) 75 75 75 110 75 94 94 124 104 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

126 LIFTING EQUIPMENT ® PROFESSIONAL LIFTING EQUIPMENT Service Jacks (cont.) 2, 3, 5, 10 & 20-TON CAPACITY FLOOR SERVICE JACKS • Steel hydraulic block assembly includes dust seals to prevent oil contamination • 5, 10 & 20-ton capacity jacks have one-pump to load feature • Long, removable two-piece handle • Safety bypass system protects cylinder • Safety overload system prevents jack from being used beyond rated capacity • 5, 10 and 20-ton floor jacks feature a US patented one pump to load ability, reducing lift time dramatically. 71202A takes 10 pumps to full rise under load • 71202A features nylon wheels t 20-TON CAPACITY AIR OPERATED HYDRAULIC FLOOR JACKS • Intended for heavy duty truck, agricultural and heavy construction equipment • Designed for use on mobile service trucks • Perfect for roadside service • Long handle with 45-1/2” reach helps in positioning of jack under vehicles with low overhang • Removable handle for shipment or storage • Hand grip also works as a stand to store the jack in a vertical position • Compact design fits easily between tandem wheels • Fast efficient air pump reduces lifting time and has a built-in relief mechanism which prevents the jack from being used beyond its maximum capacity • Made in Taiwan STEEL 302-72091 HYDRAULIC BLOCK ASSEMBLY 302-71500 CAP. ASCOT NO. MFG. NO. 302-71000 302-71100* 302-71203 302-71233 302-71331 302-71335 302-71500 302-71550* 302-72220 302-72230* 71000D 71100A 71203 71233A 71331 71335 71500G 71550G (TONS) MIN. HGT. / MAX. HGT. 6-1/2" / 27-1/4" 6-1/2" / 27-1/4" 3" / 19-3/4" 2-3/4" / 20" 3" / 19-3/4" 4" / 21-3/8" 10 10 3 2 3 3-1/2 5 5 72220A 20 72230A 20 6-1/4" / 27-1/4" 6-1/4" / 26-1/4" 6-1/2" / 26-1/4" 6-1/2" / 26-1/4" HANDLE LENGTH WT. (LB.) 46-3/4" 455 46-3/4" 466 44-5/8" 50-1/4" 44-5/8" 48" 71 92 71 42-1/2" 45" 45" 45" 106 119 270 650 670 ASCOT NO. MFG. NO. 302-72081 302-72091 72080A 72090A CAPACITY (TONS) 20 20 MIN. HEIGHT / MAX. HEIGHT WT. (LB.) 11-1/8" x 28-5/8" 8-5/5" x 22-3/4" 70 63 HEAVY DUTY REMOVABLE HANDLE * 302-71100, 302-71550 and 302-72230 have Air Hydraulic Features BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 127 5, 10 AND 20-TON CAPACITY LONG CHASSIS SERVICE JACKS • Ideal for lifting hea construction equipmen • Heavy gauge twisting • Foo to load point • 2205 HEAVY DUTY HEAVY GAUGE, STURDY FRAME CAP. ASCOT NO. MFG. NO. 302-22050 302-22051 302-22100 302-22101 302-22201 22050C 22051C 22100C 22101C 22201 DESCRIPTION Long Chassis Service Jack Long Chassis Service Jack with Air Heavy Duty Hydraulic Service Jack Heavy Duty Air Actuated Service Jack Long Chassis Service Jack (TONS) 5 5 10 10 20 MIN. HEIGHT / MAX. HEIGHT 7-1/4" / 27-1/4" 7" / 27" 6-7/8" / 27-1/2" 6-3/4" / 27-1/4" 7-1/2" / 26" HANDLE LENGTH 46" 47-1/4" 43" 47-1/4" 48-1/2" SADDLE DIAM. 6-1/2" 5-7/8" 7-1/4" 7-1/4" 6" JACK SIZE / HEIGHT WT. (LB.) 55-1/2" x 18" X 18" 56-1/2" x 18-1/4" x8" 57-3/4" x 20" x 10" 55" x 19” x 10" 58-1/2" x 20" x 38" x 12" 259 248 427 432 543 HANDLE PROTECTORS • Made of a durable synthetic rubber • Fits multiple jack manufacturers’ handles and popular tire tools • Unique design ensures a tight fit on jack/tool handle without slippage • Protects vehicles from scratches or dents caused by falling jack handles and unstable tools in the shop • Patent Pending design absorbs the dent/scratch-causing force as the handle contacts an adjacent vehicle DURABLE SYNTHETIC RUBBER ASCOT NO. MFG. NO. 448-01101 448-01102 448-01103 DESCRIPTION GHP-01 B GHP-01 Y GHP-01 R Black Handle Protector Yellow Handle Protector Red Handle Protector 448-01101 448-01102 448-01103 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

128 LIFTING EQUIPMENT Service Jacks (cont.) 20-TON TRUCK JACKS 302-93731 • Patented “Speed Pak” provides effortless lift • Large rubber wheels enhance mobility • Automatic valve prevents overloading • Extension screw permits pickup height adjustment • 2 Year Warranty CAP. ASCOT NO. MFG. NO. 302-93731 HW93731 (TONS) 20 MIN. / MAX. HEIGHT 9-1/4" / 17-3/4" POWER RAISE 5-1/2" HANDLE LENGTH 39-1/2" EXT. BASE SIZE 8-3/4" x 5-1/2" SCREW 2-1/2" OPERATING PRESSURE WT. (LB.) 110-150 PSI 69 20-TON CAPACITY AIR/HYDRAULIC SERVICE JACKS • Compact, powerful design quickly lifts rated capacity • Large 8” rubber wheels • Low height allows lifting from axle or suspension • Pressure relief valve prevents overloading • Rapid two-speed air hydraulic action quickly advances ram to load • Chrome plated plunger for extended jack life • Optional height adapters HW93265 • 2 Year Warranty LARGE RUBBER WHEELS CAP. ASCOT NO. MFG. NO. 302-93733 (TONS) HW93733 20 MIN. / MAX. HEIGHT 9" /19-3/4" POWER RAISE 6" HANDLE LENGTH 52-1/2" EXT. BASE SIZE 8" x 17" SCREW 4-3/4" OPER PRES 110-140 PSI 302-93733 20-TON AIR/HYDRAULIC SERVICE JACKS WITH CART • Unit includes a welded base to prolong service • Chrome main ram and aluminium air mot guarantee optimum lifetime • Air filter, connected to hose, included • C ASCOT NO. MFG. NO. CAP. (TONS) 302-43202 G432003 20 MIN. / MAX. HEIGHT 10" / 18-1/ 20-TON TRUCK RAMPS • Specifically designed for heavy-duty tasks • 33” Long T-handle increases mobile efficiency • Sold in set of t 302-93200 HEAVY DUTY LONG T-HANDLE ASCOT NO. MFG. NO. CAP. (TONS) 302-93200 93200 20 FRAME SIZE WHEEL DIAM. HANDLE LENGTH WT. (LB.) 13-1/2" x 45” 5" 33-3/4" 267 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 129 24-TON CAPACITY SERVICE JACK • This single stage air service jack delivers 24 Tons of lifting power • It is designed to meet and exceed the expectations of a quality jack at a very competitive price • The G432024 comes equipped with an extension screw, individual extension pegs, and heavy duty wheels designed for daily use ASCOT NO. MFG. NO. 302-43222 DESCRIPTION G432024 24-Ton Service Jack TITAN 22-TON AIR/HYDRAULIC SERVICE J • Air operated and easy to maneuver • Single piece handle - will not break • Ex saddles include: (1 of each) 1", 2" & 4" • Operates with only 80 PSI of air pr ASCOT NO. MFG. NO. CAP. (TONS) MIN. HGT. 302-14140 14140 22 9" STROKE LENGTH WT. (LB.) 6" 90 HANDLE 22-TON AIR/HYDRAULIC TRUCK JACK • Large air motor provides an exceptional quick lifting experience • Narrow chassis fits between tandem truck wheels • Comes with three adapters in different sizes that cater to different working requirements ASCOT NO. MFG. NO. 302-19150 AS1915 DESCRIPTION 22-Ton Air/Hydraulic Truck Jack MIN. HGT. MAX HGT. 10-1/2" 21-1/8" HYD. LIFT RANGE 6-1/8" THREE ADAPTERS EXTEN. SCREW 4-1/2" CHASSIS SIZE/HT. N/A SADDLE SIZE HANDLE N/A LENGTH 45-1/4" SHIP WT. (LBS) 101.9 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

130 LIFTING EQUIPMENT ® Service Jacks (cont.) PROFESSIONAL LIFTING EQUIPMENT 22-TON CAPACITY AIR/ HYDRAULIC FLOOR JACK 22-TON CAPACITY AXLE JACK • Heat treated cylinder wall & chromed piston give added stability & longer jack life • Alloy steel lifting mechanism for added durabilit engineered toleranc • ln-line filter to pr • Corrosion-resistan air motor • Ram ex 2-3/4" and 4" extensions • Lar wheels for easy positioning • A oiler to lubricate air mo no need for clevis pins • One-piec • Long “T” handle helps in positioning jack under v obstructions of ground effects • Best seller top mounted at “T” handle and allows for eas handle position • Handle locking lever secur in either vertical, horizontal or 45° position • C design fits easily between tandem wheels • Rus inhibitive coating on ram and extension scr offers longer equipment life • Large diameter wheels for easy maneuverability • Self-retracting ram eliminates manual lowering of jack • Fast operating and extremely durable • Includes 3 adapters of differing heights ASCOT NO. 302-72200 HEA TREATED CYLINDER WALL CHROMED PISTON HYDRAULIC AIR ACTUA SINGLE STAGE TRUCK J • Three handle angles choices for space sa storage, easy carrying move and easy ac point • Large rubber wheels for easy positioning and smooth motion • Sturdy one-piece handle as is standard on all Omega Truck Jacks • Chrome plated rams • Heat-treated extension screw allows low pick-up height adjustment and maximum lift height • U.S. Patented built-in by-pass device protects hydraulic system from over pumping damage 302-23221 ASCOT NO. ASCOT NO. 302-56501 MFG. NO. 565E1 CAP. (TONS) 22 MIN. HGT. / MAX. HGT. RAM LIFT REACH WIDTH 8-3/4" x 21-1/2” 4-3/4" 61" 13" WT. (LB.) 107 302-23301 23301C 30 302-23501 302-23991 23501 50 23991 100 MFG. NO. CAP. (TONS) 302-23221 23221C 22 302-23222 23222C 22 MIN. HGT. / MAX. HGT. 10 / 18.5" 11-1/2" / 18-1/4" 12" / 19" HANDLE LENGTH BASE SIZE 8-1/2" / 17" 47-3/8" 18-1/2" x 12-1/2" EXT. SCREW WT. (LB.) 47-3/8" 22" x 13" 3-7/8" 100 3-7/8" 97 40-7/8" 21-3/4" x 12-3/4" 40-7/8" 22-7/8" X 13-3/4" 12" / 18-1/8" 40-7/8" 26" X 15-3/4" N/A — — 105 174 263 MFG. NO. CAP. (TONS) 72200D 22 MIN. HG MAX. HG 9" / 18” BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 131 25-TON TRUCK JACKS 35-TON CAPACITY SER • Compact, powerful design quickly lifts rated capacity • 8-1/4” low height allows lifting from axle or suspension • Pressure relief valve prevents overloading • Specially coated ram prevents rust and extends jack life • Air assisted ram retract • Carries a very wide hydraulic c wide adaptors to give it stabilit to shift • Solid base makes the ne to operate • Provides a low minimum heigh clearance on vehicles with low suspension • T options this product is able to lift high tr or unloaded without issue • Rec to a minimum of 30,000 lifts without f MADE IN THE USA 302-93735 Includes 3" Extension CA ASCOT NO. MFG. NO. 302-03531 GT-3531 (TONS 35 302-03531 LOW MINIMUM HEIGHT ASCOT NO. CAP. MFG. NO. (TONS) 302-93735 HW93735A 25-Ton MIN. HGT. / MAX. HGT. 8-1/4" / 21-1/2” HANDLE LENGTH 53" BASE SIZE EXT. SCREW 20"x14" 5-1/8" WT. (LB.) 124 22-TON CAPACITY AIR OPER HYDRAULIC FLOOR J • All steel-welded construction built f • Long 50" T-handle for easy positioning of jack under vehicles with low overhang • Quick-lift mechanism allo for substantially shortened ram-lifting time when no load is involved • Spring return for self re screw for fine adjustment beyond ra lifting limit • Built-in safety valve pr rated capacity • Specially processed air pump for low-noise operation 45/20-TON 2-S • Provides an even lower minimum of under 6 get under Buses, RV’s, and Car Hauler regulator and water separa jacks • Solid base makes the ne safe to operate • Long handle and truer balanc it easy to maneuver under a v 302-04532 BUILT-IN AIR REGULATOR 302-00224 CAP. ASCOT NO. MFG. NO. 302-00224 ZATJ-22S-4 (TONS) 22 MIN. HGT. / MAX. HGT. 8" x 15-7/8" FRAME HEIGHT 7-1/4" CYLINDER LIFT EXT. SCREW 4-1/4" 3-5/8" WT. (LB.) 82 ASCOT NO. MFG. NO. 302-04532 GT-4532 CAP. (TONS) 45/20 MIN. HGT. / MAX. HGT. 4-7/8" / 16-1/2" WT. (LB.) 99 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

132 LIFTING EQUIPMENT Service Jacks (cont.) YAK 22/11-TON STANDARD AIR/ HYDRAULIC JACK • Extremely light, compact and efficient • Made up with the best materials on the market • Models 92000 and 92001 represent the technological leading edge of our product range • Included are 0.5" | 12.7 mm and (2) 2.35" | 60 mm Extensions • Stroke: 6.5" • Air Pressure: 116-145 PSI • Min. Height: 5.5", Max. Height: 12.05" • Weight: 38.5 Lbs. MADE IN ITALY ASCOT NO. MFG. NO. DESCRIPTION 302-92000 92000 ASCOT NO. MFG. NO. DESCRIPTION 302-92007 92007 22/11-Ton Standard Air Hy YAK 44/22-TON AIR/ HYDRAULIC HD JACK • Air hydraulic jack for heavy vehicles, practical and easy to handle • The pistons move back automatically; the two descent valves guarantee perfect holding in all situations and controlled speed under load • Ideal for workshops, mobile workshops, tire repairers and bodywork shops • Stroke: 6" • Air Pressure: 116-145 PSI • Min. Height: 8.54", Max. Height: 18.38" • Weight: 101 Lbs. MADE IN ITALY ASCOT NO. MFG. NO. DESCRIPTION 302-92004 92004 YAK 4 STAGE 88/55/28/17TON AIR/HYDRAULIC JACK • Air hydraulic jack for heavy vehicles, practical and effective • The pistons move back automatically the two descent valves guarantee perfect holding in all situations and controlled speed under load • A complete range of jacks for all stroke and capacity requirements • Ideal for workshops, tire repairers and bodywork shops • Stroke: 11" • Air Pressure: 116-145 PSI • Min. Height: 7.09", Max. Height: 18.89" • Weight: 170 Lbs. All Yak Jacks come with a 3-year extended warranty. YAK 3 STAGE 66/33/17-TON AIR/ HYDRAULIC JACK • Air hydraulic jacks with pistons moving back automatically. • Specifically designed for lifting buses and all vehicles with low profile axles • Stroke: 5" • Air Pressure: 116-145 PSI • Min. Height: 5.31", Max. Height: 10.05" • Weight: 110 Lbs. MADE IN ITALY 3 Stage 66/33/17-Ton Air Hydraulic Jack MADE IN ITALY 44/22-Ton Air/Hydraulic HD Jack ASCOT NO. MFG. NO. DESCRIPTION 302-92010 92010 4 Stage 88/55/28/17-Ton Air/Hydraulic Jack BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 133 ® PROFESSIONAL LIFTING EQUIPMENT 44-TON CAPACITY AIR/HYDRAULIC FLOOR JACKS • Designed for heavy duty truck, agricultural and heavy construction equipment • Ideal for loaded truck and trailer roadside service calls • Heavy enough for rail and bus work • 61.75" Long "T" handle helps in positioning jack under vehicles with low overhang • Handle locking lever secures handle in either vertical, horizontal or 45 degree position • Overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE loadlimiting standard • Rust inhibitive coating on rams offers longer life • Integrated filter protects air motor • Double acting pump raises ram more quickly to the load • Suspension loaded axle prevents wheel damage • Vacuum operated ram retraction eliminates manual lowering of jack • Safety button at the top of the handle can be pushed in to immediately stop the jack operation in case of emergency • A double acting pump raises the ram more quickly to the load • Includes a 2-3/4” diameter saddle, 2” and 4” long stackable extensions and extension holder • Made in Italy ASCOT NO. MFG. NO. CAPACITY (TONS) MIN. HEIGHT / MAX. HEIGHT 9-1/4" x 15-5/8" 302-72244 72244 44 PSI RANGE WT. (LB.) 130-175 149 LONG T-HANDLE DOUBLE ACTING PUMP ASCOT NO. MFG. NO. 302-72204 302-72206 72204 72206 DESCRIPTION AVAILABLE ACCESSORIES 4" Extension Adapter 2-3/4" Diameter Lifting Saddle 30, 50 AND 55-TON CAPACITY AIR/ HYDRAULIC TELESCOPIC FLOOR J • Long “T” handle for positioning jack under vehicles with lo • Handle locking lever secures handle in either vertic • Safety overload system prevents cylinder damage • Rus • Integrated filter protects air motor • Double acting pump r to the load • Suspension loaded axle prevents wheel damage • Made in Italy LONG T-HANDLE HANDLE LOCKING LEVER ASCOT NO. MFG. NO. CAP. (TONS) 302-72212 302-72218 302-72225 72212 72218 72225 55 33 50 MIN. HEIGHT / MAX. HEIGHT 5.9" / 15.4” 5.9" / 12.71” 8.7" / 16.6” STROKE 9.5" 7.3" 7.9" CHASSIS SIZE WHEEL DIAM. PSI RANGE WT. (LB.) 8.6" x 39.3” 8.5" x 49.2" 8.6" x 39.3” 7" 8-1/2" 7" 100-175 120-175 120-175 233 106 235 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

134 LIFTING EQUIPMENT Service Jacks (cont.) HIGH TONNAGE JACKS • Load blocking system • Remote control for working safely • Various extensions to suit all operations • All models are hydro-pneumatically operated and equipped with a dual descent valve for greater control when bearing weight and automatic piston return • Can also be fitted with a manual emergency pump (on request) • Made in Italy HIGH TONNAGE JUMBO JACKS • Ideal for giant tire changing, mining, railroads, construction rigging • No need for cribbing - time savings! • Balanced for easy moving • Large pneumatic wheels • Only 23" wide, the jacks fit in tight spots • 50" long, 8 position handle for easy tilt back and moving of the jack • Welded fully enclosed heavy-duty steel frame with built in lifting holes • Hydraulic radial piston pump • Minimum 90 to 150 psi air supply needed to power hydraulic pump • Extension holders bolted to frame for easy storage • Easy to change oil filter • All Jacks come with 5" & 9" extentions & 1" saddle • Made in Canada LOAD BLOCKING SYSTEM LARGE PNEUMATIC WHEELS REMOTE CONTROL HEAVY DUTY STEEL FRAME DUAL DESCENT VALVE 308-10320 302-91000 The High Tonnage Jumbo Jack in use. ASCOT NO. MFG. NO. 302-91000 302-91001 302-91003 302-91004 302-91005 91000 91001 91003 91004 91005 DESCRIPTION High Tonnage Jack High TonnageJack High Tonnage Jack High Tonnage Jack High Tonnage Jack CAPACITY 25/50/80-Ton Stages 30/60-Ton Stages 50/80-Ton Stages 100-Ton 150-Ton ASCOT NO. 308-10320 308-10321 308-10322 308-10323 308-10324 CAP. MFG. NO. 10320 10321 10322 10323 10324 (TONS) 150 150 100 200 250 COLLAPSED POINT 27" 36" 27" 27" 27" STROKE 14-3/8" 22-3/8" 14-3/8" 14-1/2" 14" LIFTING HEIGHT 41-3/8” 58-3/8” 41-3/8” 41-1/2" 41" BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 135 Jack Stands 3, 6 & 12-TON JACK STANDS • Heavy-duty jack stands that are suitable for emergency tire changes, repairs and more • Ratchet height adjustment built within column • Wide base for added stability • Multi-leveled ductile iron ratchet bar adds strength and durability • Sold in pairs of two NOW FEATURING A DOUBLE LOCK SAFETY PIN FOR ADDED SECURITY 10-TON HIGH JACK STANDS (PAIR) • Pin-style stands with supporting range fr to 47.56" suitable for high-height applic • Heavy-duty tubular steel design pr and rigidity • Multiple pin holes to allo adjustment to desired height • Saddle with lugs for easy positioning of the load • Sold and to be used only in pairs PIN-STYLE STANDS 302-63030 22-TON JACK STANDS 302-63060 NOW WITH A DOUBLE LOCK PIN • Used in pairs for supporting trucks, trailers, and equipmen in fleet garages, agricultur industrial and construction environments • Sturdy, w steel construction for exceptional safety and strength • Heavy gauge steel helps prevent distortion or twisting • Wide base for added stability • Multi-position iron column bar for convenient height adjustment • Sold in pairs of two 302-63220 WIDE BASE 302-63120 ASCOT NO. MFG. NO. 302-63221 JACK STAND SPECIFICATIONS ASCOT NO. 302-51005 302-63220 302-63030 302-63060 302-63120 MFG. NO. 510005 63220 63030 63060 63120 CAPACITY (TONS) 10 22 3-Ton 6-Ton 12-Ton BASE SIZE 16-7/32” x 16-7/32” 9-7/8" x 9-7/8" 7-5/8" x 6-7/8" 11" x 9-3/4" 11-3/4" x 10-5/8" MIN. HEIGHT / MAX. HEIGHT 27-61/64" / 47-9/16" 13-3/8" / 19-5/8" 11" / 16-3/8" 15-3/4" / 24-3/8" 17-1/2" / 27-1/2" SHIPPING WEIGHT 123.2 lb. 63.3 lb. 14.9 lb. 32 lb. 56 lb. 63220-1 DESCRIPTION AVAILABLE ACCESSORIES FOR 22-TON JACK STANDS Support Pin for 22-Ton Jack Stands WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

136 LIFTING EQUIPMENT Jack Stands (cont.) NORCO JACK STANDS • Unique spring loaded pawl provides constant locking pressure against lifting column when raising the column to the load - the benefit is that it makes it a one-handed operation • Four legged base with foot pads for added strength and more secure footing • Common machine bolt secures lifting column to stand and provides stability • Recessed column saddle for acceptance of vehicle panel rail • Design qualification tested to 200% of rated capacity • Capacity is per pair SECURE FOOTING 302-81208 ® PROFESSIONAL LIFTING EQUIPMENT 302-81006 302-81012 ASCOT NO. 302-81205 302-81208 302-81209 302-81210 302-81225 302-81004 302-81006 302-81012 302-82205 302-82208 302-82209 302-82210 MFG. NO. 81205 81208 81209 81210 81225 81004C 81006D 81012 81205i 81208i 81209i 81210i CAP. (TONS) 5 10 10 10 25 3 6 12 5 10 10 10 MIN. HGT. / MAX. HGT. 9-1/2" / 15-3/4" 10-1/2" / 17" 18-1/2" / 30" 28" / 47" 12" / 20" IMPORT 12" / 17-1/2” 16-1/4" / 24-7/8” 19-5/8" / 29-3/8” 9-1/2" / 15-3/4" 10-1/2" / 17" 18-1/2" / 30" 28" / 47" 9/16" 5/8" 1-1/4" 3" x 2" 4" x 1-1/2" 7" x 1-1/2" 10" x 2" 1-1/8" x 4-9/16" 1-1/8" x 4-7/8" 1-5/8" x 4-3/4" 3" x 4-1/2" 3" x 5" 3" x 5" 3" x 5" 7-1/2" x 7-7/8" 10-1/16" x 11-1/16" 13" x 15" 9" x 9" 12-1/2" x 12-1/2" 17" x 17" 16" x 16" 19 30 86 38 60 80 106 HEIGHT INTERVALS SADDLE SIZE DOMESTIC 3" x 2" 4" x 1-1/2" 7" x 1-1/2" 10" x 2" 3" x 3" 3" x 4-1/2" 3" x 5" 3" x 5" 3" x 5" 2-1/4" x 3-1/4" 9" x 9" 12-1/2" x 12-1/2" 17" x 17" 16" x 16" 10" x 10" 38 60 80 106 65 BASE SIZE WT./PR (LB.) BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 137 10-TON JACK STANDS 3 AND 6-TON JACK STANDS • Saddle column provides ratchet action height adjustment • Dual purpose handle serves as carry handle and saddle column release • Multi position ratchet bar provides strength and durability • Formed base adds stability and helps reduce sinkage into pavement CAP. ASCOT NO. MFG. NO. 302-93503 HW93503 302-93506 HW93506 (TONS) 3 6 • Ideal for fleet, agricultural and construction maintenance • Heavy duty pin style height adjustment • Wide, square tubing construction and base for maximum load stability • Adjusts from 19-1/2" to 31-1/2" in 2" intervals • Large saddle secures load • Integrated carrying handle • Sold and to be used in pairs • Capacity is per pair HEAVY DUTY MADE IN THE USA 302-93503 302-93506 MIN. HGT. /MAX. HGT. 12-1/8" / 19" 16-1/4" / 25-3/4” HEIGHT INTERVALS 5/8" 5/8" SADDLE SIZE 7-1/2" x 9" 10-1/2" x 13" 7-TON FORKLIFT S • Low profile muscle work f forklifts and heavy machinery • Wide, square base for ma load stability • Adjusts fr to 15-3/4" at 1” intervals • Hea duty holding pins for adjus heights • Lightweight for portability and ease of positioning MADE IN THE USA CAP. ASCOT NO. MFG. NO. 302-93524 HW93524F (TONS) 7 MIN. /MAX. HGT. 12.38" / 20.38" MADE IN THE USA 10-TON PIN-STYLE JACK STAND • Ideal for fleet, agricultural and construction maintenance • Pin style column adjusts in 2" height intervals • Heavy duty square tubing • Large saddle securely supports load • Sold in pairs • Capacity is per pair ASCOT NO. MFG. NO. CAP. (TONS) 302-93511 HW93511 10 MIN. HGT. / MAX. HGT. 30" / 52" BASE SIZE 19" x 19" WT. (LB.) 148 302-32125 32125B 12 302 SADDLE SIZE 2.25" / 3.25" JACK SIZE 9.88" x 9.88" WT. (LB.) 90 ASCOT NO. MFG. NO. 302-93512 HW93512 OFILE CLE ORK CAP. (TONS) MIN. HGT. / MAX. HGT. BASE SIZE 20 "/ 31-1/2" 10 16"x16" WT. (LB.) 90 BASE SIZE 1" x 4-1/2" 1" x 5" WT. (LB.) 18.5 41 302-93512 3, 6 AND 12-TON CAPACITY “RATCHET STYLE” STAND • Counter-weighted pawl serves as a saf locking device to prevent the load from accidentally disengaging • Sturdy, welded steel construction for superior safety and strength • One piece, multi-position ductile r bar provides super strength and dur and quick adjustment mechanism tha securely lock into desired location • Sold and to be used only in pairs • Capacity is per pair ASCOT NO. 302-32038 302-32068 MFG. NO. 32038 32068 CAP. (TONS) 3 6 MIN. HGT. / MAX. HGT. 11-38" / 16.75" 16.00" / 23.50" 19.63" / 29.88" SADDLE SIZE 3.00" / 1.00" 3.75" x 1.00" 5.13" x 1.75" WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BASE SIZE 7.63" x 6.88" 10.50" x 8.88" 12.38" x 12.50" WT. (LB.) 13.9 27.5 42.1 BUYER'S GUIDE LIFTING EQUIPMENT

138 LIFTING EQUIPMENT Jack Stands (cont.) 9-TON CAPACITY JACK STANDS • Ideal for Forklift Trucks • Sturdy, welded steel construction • Heavy gauge steel frame prevents distortion or twisting • Sold in pairs 12-TON JACK STAND WITH PIN AND WHEELS • All stands have a heavy dut robot welded frame, and a multi-position ductile ratche bar • The quick adjustment mechanism securely locks in the right location • Includes counter-weighted pawl for saf securing • Capacity is per stand STURDY, WELDED STEEL ASCOT NO. MFG. NO. CAP. (TONS) MIN. HGT. / MAX. HGT. WT. (LB.) 302-14360 14360 9 9-1/2" / 16-1/2" 25 HD ROBOT WELDED FRAME 10 AND 22-TON CAPACITY PIN-STYLE JACK STANDS • Sturdy, welded steel construction for superior safety and strength • Heavy gauge, steel frame helps prevent distortion or twisting • Sold and to be used only in pairs • Capacity is per pair COUNTERWEIGHTED PAWL STURDY, WELDED STEEL CAP. ASCOT NO. MFG. NO. 302-32105 32105B 302-32107 302-32225 (TONS) 10 32107B 10 32225B 22 MIN. HGT. / MAX. HGT. 18-5/8" / 31-1/8" 28" / 47-5/8" 12" / 19-5/8" SADDLE SIZE BASE SIZE 3-1/8" x 5" 3-3/8" x 5" 3-1/8" x 2-3/4" 16-1/8" x 15-5/8" 16-1/4" x 46-1/4" 9-7/8" / 9-7/8" WT. (LB.) 84 109 66 CAP. ASCOT NO. MFG. NO. 302-45125 G451205 (TONS) MIN. HGT. / MAX. HGT. BASE SIZE 11-4/5" / 18-1/10" 12 19"x19" WT. (LB.) 144 302-45125 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 139 MADE IN THE USA 20-TON SCREW STYLE JACK STAND • Screw-style stand makes it easy to hold load at desired height and secure with locking collar • Adjustable screw for height extension and retraction • Heavy duty design and application SCREW STYLE HEAVY DUTY SQUARE TUBING 302-93526 CAP. ASCOT NO. MFG. NO. 302-10802 302-10803 10802 10803 (TONS) 20 20 MIN. HGT. / MAX. HGT. 16.5" x 26.5" 26" x 46" BASE THICKNESS BASE SIZE 1/4" 1/4" 13" x 13" 13" x 13" WT. (LB.) CAP. 65 82 ASCOT NO. MFG. NO. (TONS) 302-93526 HW93526F 25 MIN. HGT. / MAX. HGT. 12-3/8" / 20-3/8" HEIGHT INTERVALS 2-1/8" BASE SIZE 10" x 10" WT. (LB.) 90 302-10803 25-TON HEAVY DUTY JACK STAND • Ideal for fleet, agricultural, and construction maintenance • Pin style column adjusts in 1-1/2" heigh intervals • Heavy duty square tubing • Large saddle securely supports load • Sold in pairs ® USA & PROFESSIONAL LIFTING EQUIPMENT IMPORTED MODELS AVAILABLE 25-TON CAPACITY JACK STANDS • Intended for fleet and maintenance garages wher profile stands are used to support loaded trailers • Pin-type support column adjusts to four diff height positions • Adjustmen pin is secured to stand to prevent loss • Handle provides ease of positioning and carrying • 3/8” thick solid steel base plate for stability 20-TON CAPACITY HEAVY DUTY JACK STANDS • Sturdy, welded steel construction for superior safety and strength • Heavy gauge, steel frame helps prevent distortion or twisting • Sold in pairs • Capacity is per pair HEAVY GAUGE STEEL FRAME 302-81225 ASCOT NO. MFG. NO. CAP. DESC. 302-81225 81225 US (TONS) 25 302-82225 81225i Import 25 MIN. HGT. / MAX. HGT. HEIGHT INTERVALS 12" / 20" 3" x 3" 12" / 20" 3" x 3" SADDLE SIZE 2-1/4" x 3-1/4" 2-1/4" x 3-1/4" BASE SIZE 10" x 10" 10" x 10" WT. (LB.) 2-14400 65 65 ASCOT NO. MFG. NO. CAP. (TONS) MIN. HGT. / MAX. HGT. WT. (LB.) 302-14400 14400 20 12" / 20" 72 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

140 LIFTING EQUIPMENT ® PROFESSIONAL LIFTING EQUIPMENT Specialty Jack 4-TON CAPACITY FORKLIFT JA • Two-position saddle at scissors end can be quickly r edges or flat surfaces of a load • 2-1/4" low lift heigh removable handle for ease of pumping and stor “fingertip control” release knob provides slow, c • Safety bypass and overload systems prevent c the jack from being used beyond the ASME/PASE load-limiting s 10-TON CAPACITY AIR LIFT JACK TWO POSITION SADDLE AT SCISSORS END TWOPOSITION SADDLE • Designed for use in truck and farm equipment dealer garages, heavy duty construction repair shops and bus company garages • Three-way heavy duty air valve provides fine control when lifting or lowering a vehicle • Automatic safety lock engages in six different height positions independent of air pressure • Designed for lifting entire front or rear of a vehicle • Front swivel caster wheel and two 12-1/4" diameter pneumatic rear tires provide easy maneuverability • Adjustable lifting saddles can be raised and extended to desired position Lifts at edge Lifts flat surfaces 3-WAY ASCOT NO. MFG. NO. CAP. (TONS) MIN. HGT. / MAX. HGT. OVERALL LENGTH OVERALL WIDTH 2-1/4" / 16-1/4" 302-72036 72036D 4 26-1/8" 8-3/4" WT. (LB.) 75 ADJUSTABLE LIFTING 10 AND 15-TON CAPACITY PORTABLE AIR LIFT JACKS t 3-WAY HEAVY DUTY AIR VALVE 308-82999 ASCOT NO. CAP. ASCOT NO. MFG. NO. 308-82990 308-82992 (TONS) 82990C 10 82992 15 MIN. HGT. / MAX. HGT. 17-3/4" / 49-3/8" 18-1/8" / 51-3/8" OVERALL LENGTH 58" 59-1/2" OVERALL WIDTH 13-5/8" 15" OVERALL HEIGHT STROKE 17-3/4" 18-1/8" 11-1/2" 11-1/4" WT. (LB.) 178 279 MFG. NO. CAP. (TONS) 308-83999 83999i 10 MIN. HGT. / MAX. HGT. 308-82999 82999 10 12-1/2" / 50" 12-1/4" / 49-1/2" MIN. PSI FOR RATED LOAD 200 WT. (LB.) 638 200 817 SADDLES HEAVY DUTY AIR VALVE BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 141 4-TON CAPACITY FORKLIFT JACK 10-TON AIR JACK AND SUPPORT STAND • Dual lift points for various lifting applications: The lower point is for forklift truck lifts and the higher point is for most farm equipment lifts • Precision control of lifting and lowering functions • Operates as both a support stand and air actuated jack • Completely air operated and has a heavy duty pin locking system • Comes with a 10 foot air hose and maneuverable wheel base for easy accurate positioning • A total lift range of 17-1/2" to 51" makes it a very versatile and helpful piece of equipment DUAL LIFT POINTS ASCOT NO. MFG. NO. CAP. (TONS) MIN. HGT. / MAX. HGT. HYDRAULIC HEIGHT BASE SIZE 17-1/2" / 51-1/8" 308-34100 34100 10 Ton 11-1/2" 22" X 12" WT. (LB.) 189 302-28045 ON FLOOR FORKLIFT JACK • Specially designed seals and strong steel tion • Low pick up height • Removable handle and compact size • 2 Year Warranty MADE IN THE USA ASCOT NO. MFG. NO. 302-28045 28045 CAP. (TONS) 4 MIN. HGT. / MAX. HGT. 3" / 17-1/2" WT. (LB.) 91 302-93659 STRONG STEEL DESIGN CAP. ASCOT NO. MFG. NO. 302-93659 HW93659 (TONS) 4 MIN. HGT./MAX. HGT. 2-1/2" / 16-1/2" POWER RAISE 14" HANDLE LENGTH 25" BASE SIZE 8" x 26-1/2" WT. (LB.) 71 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

142 LIFTING EQUIPMENT Specialty Jacks (cont.) TJ-110 10-TON CAPACITY LIFT JACK • Doubles as a support stand • HW93737A has a removable handle and 10 foot air hose for safe position and operation • Completely air-operated • 2 Year Warranty MADE IN THE USA LIFTING JACK • The TJ-110 Lifting Jack has an 11-ton lifting capacity and is ideal for lifting larger Off-Highway and heavy farm equipment • Works great on truck and trailers too! • The extending piston increases lifting range without the need for blocks • Designed and built with dependability and safety in mind • The large saddle helps to minimize slippage while the large base increases stability • An aluminum cylinder helps to decrease the overall weight of the unit • Equipped with a 3-way air control valve for fast action 308-93737 308-93690 CAP. ASCOT NO. MFG. NO. 308-93690 HW93690 10 308-93737 HW93737A 10 (TONS) MIN. HGT. / MAX. HGT. 17-3/4" / 40" 17-3/4" / 40" SADDLE SPREAD 28" to 53" 2.25" to 3.25" HEIGHT INTERVALS N/A 2-1/2" MIN. PSI FOR RATED LOAD 200 200 WT. (LB.) 670 165 10-TON AIR OPERATED WHEEL LIFT SYSTEM LOAD RETENTION PIN MADE IN THE • Lifts engage wheels without needing to remove panels on vehicle • Raise front or rear end of vehicle using a single controller • Load retention pin allows lifts to function as stands in six different positions • Completely air operated • 2 Year Warranty • Sold in pairs CAP. ASCOT NO. MFG. NO. (TONS) 308-93693 HW93693 10 MIN. HGT. / MAX. HGT. Floor Level / 24” USA FULLY AIR OPERATED 308-00110 FOR LARGER EQUIPMENT LARGE SADDLE POWER RAISE 24" WHEEL DIAM. MIN./MAX. 19-1/2" / 24-1/2” FRAME SIZE (W X D X H) 41-9/16” x 44-1/4” x 53-1/4” PSI 160 WT. (LB.) 1,234 ASCOT NO. MFG. NO. 308-00110 TJ-110 CAP. (TONS) 11 MIN. HGT. / MAX. HGT. 19" / 50” BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 143 ® PROFESSIONAL LIFTING EQUIPMENT Transmission Jacks 1/2-TON CAPACITY TRANSMISSION JACK Wide chassis with open front provides: • Wider opening for saddle and transmission to come lower to the ground for easy removal • Efficient load distribution and stability • Easy access to saddle tilt knobs • Fully adjustable universal saddle with adjustable corner brackets and safety chain • Safety by-pass system prevents damage to cylinder • Safety overload system prevents jack from being used beyond its rated capacity • Full 360 degree rotating pump handle operates in any position • Flash chromed ram inhibits rust from entering the hydraulic system • Four full-swivel ball bearing caster wheels for easy positioning • Wide chassis for efficient load distribution and stability • Norco manufactures over 20 vehicle and service specific adapters to enhance the capabilities of their transmission jacks • MADE IN THE USA UNIVERSAL SADDLE MADE IN THE USA 1/2-TON CAPACITY UNDER HOIST TRANSMISSION JACKS • Fully adjustable universal saddle with adjustable corner brackets and safety chain • Safety overload system prevents jack from being used beyond rated capacity • Foot operated pump and lowering pedals • Two-stage flash chromed rams inhibit rust from entering hydraulic system • 37172550B same as 371-72500E but lifts the load twice as fast with it’s US Patented FASTJACK mechanism • Norco manufactures over 20 vehicle and service specific adapters to enhance the capabilities of their transmission jacks • Made in T UNIVERSAL SADDLE 371-72450 371-72050 CAP. ASCOT NO. MFG. NO. 371-72050 72050C (TONS) 1/2 1-1/2-TON CAPACITY TRUCK TRANSMISSION JACKS • For heavy truck transmissions • Fully adjustable universal saddle with adjustable arms to position the transmission • Heavy duty chain with convenient chain tensioner secures load to saddle • Safety bypass system prevents damage to the hydraulic cylinder • Norco manufactures over 20 vehicle and service specific adapters to enhance the capabilities of their transmission jacks ASCOT NO. MFG. NO. 371-72000 72000E 371-72001 CAP. (TONS) 1-1/2 72000Ei 1-1/2 SAFETY OVERLOAD SYSTEM MIN. HGT. / MAX. HGT. 7-3/4" / 30-3/8” WT. (LB.) 138 UNIVERSAL SADDLE 371-72550 371-72000 MIN. HGT. / MAX. HGT. 7-3/4" / 36-1/2” IMPORT 7-3/4" / 35-2/4” 4" 26-1/2" / 44-1/2” 10-1/4" / 15-1/4” 302 WHEEL DIAM. DOMESTIC 4" 25" / 45" 10-1/4" / 11" 310 ASCOT NO. MFG. NO. CAP. (TONS) 1/2 1/2 1/2 371-72450 371-72501 371-72550 72450B 72500E 72550B MIN. HGT. / MAX. HGT. 36" / 75" 35" / 72" 35" / 72" WT. (LB.) 175 176 178 CHASSIS SIZE SADDLE SIZE WT. (LB.) WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

144 LIFTING EQUIPMENT ® PROFESSIONAL LIFTING EQUIPMENT Transmission Jacks (cont.) 1-TON CAPACITY HYDRAULIC TRANSMISSION JACK • Designed for the removal, installation and transportation (in the lowered position) of heavy duty truck transmissions that are raised by an above-ground lift • Air/hydraulic foot pump for hands free operation • Fully adjustable universal saddle with adjustable arms • Heavy duty chain with chain tensioner to secure load to saddle • Made in Taiwan TRANSMISSION JACK & FUEL TANK REMOVER ADAPTERS • Allows for a safer and quicker removal of transmissions that are not flat on the bottom • Adapters fit transmission jacks 72050E, 72500E and 72550B 309-72533 309-72508 FITS 72050E, 72500E & 72550B 309-72525 AIR/ HYDRAULIC FOOT PUMP ASCOT NO. MFG. NO. 309-72501 309-72502 309-72504 309-72505 72501B 72502B 72504B 72505B UNIVERSAL SADDLE 309-72506 309-72507 309-72508 309-72517 309-72525 ASCOT NO. 371-72701 MFG. NO. 72701A CAP. (TONS) 1 MIN. HGT. / MAX. HGT. 41-1/4" / 69-3/8” WT. (LB.) 273 309-72533 72506B 72507A 72508 72507B 72525 72533 DESCRIPTION Adapter for use on GMC 4-Wheel Drive Transmission Case. WEIGHT: 18 lb. Adapter for use on 4 and 5 Speed Truck Transmissions. WEIGHT: 13 lb. Adapter for use on GMC Front Wheel Drive Transmissions. WEIGHT: 24 lb. Adapter for use on GMC Front Wheel Drive Transmissions (X, J and A Bodies) 3T40. WEIGHT: 15 lb. Adapter for use on GMC 440 Metric Transmissions 4T60-E. WEIGHT: 11-1/2 lb. Adapter for use on Ford 640E & 4R100 (4WD) Truck & Van Transmissions Fuel Tank Adapter Adapter for use on Ford E40D Truck Transmissions. WEIGHT: 34 lb. Optional saddle that replaces the four Adjustable Corner Brackets found on Standard and Universal Saddles This tool will allow for the safe and secure removal and installation of DPFs, Drive Shafts, and automotive transmissions up to 750lb. The bean bag eliminates the need for individual DPF transmission adapters. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 145 1-TON FLOOR STYLE TRANSMISSION JACK • Wishbone design allows unit more mobility • Wide stance tubular steel frame equipped with 4 ball bearing 360° swivel casters • Two heavy cast adjustable mounting plates and load restraint chain • Built in relief valves prevent overloading • 2 Year Warranty FULLER ROAD RANGER TRANSMISSION ADAPTER FOR HW93718 • Fuller Transmission Kit for HW93718 WISHBONE DESIGN BUILT-IN RELIEF VALVES 309-93248 371-93718 CAP. ASCOT NO. MFG. NO. 371-93718 HW93718 (TONS) 1 MIN. HGT. / MAX. HGT. 10-1/4" / 45-1/4" CHASSIS SIZE 47-1/2" / 28-1/4” FORWARD TILT / REAR TILT 27-11/16˚ / 32˚ SIDEWAY TILT WT. (LB.) 13˚ L & R 309 FUEL TANK ADAPTER FOR OMEGALIFT AND HEIN-WERNER TRANSMISSION JACKS • Specifically designed to enable the telescopic transmission jack to be used in the removal and installation of fuel tanks • Maximum tank size of 40 gallons • Two (2x) ratcheting nylon safety straps • Four (4x) padded arms to avoid damage on metal tank HEIN-WERNER MULTIPURPOSE TRANSMISSION ADAPTER • Optional, for use with HW93720 ASCOT NO. MFG. NO. 309-93248 DESCRIPTION HW93248 Fuller Road Ranger Transmission Adapter for HW93718 ASCOT NO. MFG. NO. 309-40080 40080 DESCRIPTION Fuel Tank Adapter for OmegaLift and Hein-Werner Transmission Jacks ASCOT NO. MFG. NO. 309-93721 HW93721 DESCRIPTION Hein-Werner - Multipurpose Transmission Adapter WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

146 LIFTING EQUIPMENT Transmission Jacks (cont.) TELESCOPIC TRANSMISSION JACK • First stage utilizes air for a quick initial rise • Second stage uses hydraulic hand pump for precise control • Four ratcheting brackets fit transmission pan flanges • Hefty nylon safety strap helps anchor transmission • Wide spread casters for smooth maneuverability • Head adjustments made easy with big easy-to-grip crank handles • Optional adapters available • 2 Year Warranty MADE IN THE USA FULLY AIR OPERATED CAP. ASCOT NO. MFG. NO. 371-93720 HW93720 (TONS) 1/2 MIN. HGT. / MAX. HGT. LIFTING HEAD HGT. CHASSIS SIZE 34"-1/2 / 72" 11-3/8" x 11-3/8" 41-1/4" / 41-1/4" FORWARD TILT / REAR TILT 50˚/ 20˚ SIDEWAY TILT 11˚ L & R WT. (LB.) 371-93720 117 TELESCOPIC TRANSMISSION JACK • Chrome-plated rams maximize its high reach operated by a user friendly foot pedal • Extra-wide base lowers center of gravity and promotes stability • Rugged steel wheels and full swivel ball bearing casters • Adjustable ratchet style saddle (Model 41000C and 41001C) • A unique release pedal provides safety in lowering the load • Model 41000C and 41001C are 2 stage manual • Model 41001C is Air Actuated and requires 110-175 PSI CAP. ASCOT NO. MFG. NO. 371-41000 41000C 371-41001 371-42003 41001C 42003 (TONS) 1/2 1/2 1 MIN. HGT. / MAX. HGT. 39-22/25" / 77-1/4" 39-7/8" / 77-1/4" 46" / 74-3/4 SADDLE BASE 12-5/8" x 7-7/8" 11-1/2" x 11-1/2" 13 x 13 MIN. EXP. SADDLE AREA 12-5/8" x 7-7/8" 11-1/2" x 11-1/2" MAX. EXP. SADDLE AREA JACK SIZE 21" x 21" 21" x 21" 33-13/100" x 35-1/2" 33-13/100" x 35-1/2" 13 x 13 24-1/2" x 19" 42" x 39-3/4" WT. (LB.) 161 171 294 CHROME PLATED RAMS FLOOR-STYLE TELESCOPIC TRANSMISSION JACK • The adjustable head can be tilted forward, backward and side to side for optimum alignment of transmission bolt pattern and pins • Hydraulic system is protected from internal damage by a patented by-pass mechanism • Load-restraining chain is vital for raising and lowering safety • Four wheel casters allow easy movement and positioning of transmission jack • Rugged steel wheels and full swivel ball bearing casters • User friendly 360˚ rotating pumping socket for maximum in directional operation CAP. ASCOT NO. MFG. NO. 371-42000 42000C 371-43000 (TONS) 1 43000 1-1/2 MIN. HGT. / MAX. HGT. 7-3/4" / 33" 7-7/8" / 37-1/4” SADDLE BASE 14-3/4" x 7-7/8" 14-3/4" x 16-1/8" HANDLE LENGTH 22-1/2" 29-1/2" EXP. SADDLE AREA 17" x 15-1/2" 16-1/8" x 26-7/8" JACK SIZE 39-3/8" x 19-1/8" 46-3/4" x 25-5/8" WT. (LB.) 200 376 FULLY ADJUSTABLE HEAD BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 147 Wheel Dollies 1/2-TON CAPACITY HYDRAULIC WHEEL DOLLY • For the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level • Heavy duty lift arms made with ball bearing conveyor rollers allow easy rotation of wheels for alignment with bolt pattern • 7-1/2" of side-to-side lift arm adjustment eliminates the trial and error method of aligning the rim’s lug holes with the wheel drum • A 1500-pound capacity heavy duty winch with 5-to-1 gear ratio provides ease of operation • The winch gear design acts as a brake and allow the load to be lowered incrementally if desired and without the need of constant hand pressure against the crank handle • A hydraulic jack tilts the lift arms in order to match the angle of the spindle • Safety chain provided to secure tires and wheels to the dolly • Maneuverability is made easy by means of two rear mounted ball bearing swivel caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving • Perfect for use with truck lifts • ASSEMBLED IN THE USA • 82304 includes air-operated pump that allows the unit to lift the load effortlessly ASCOT NO. MFG. NO. 407-82304 82304 CAP. (TONS) 1/2 LIFT RANGE TILT RANGE 2-1/8" - 39-1/2" -2°-30° LIFT ARM SIZE 30-7/8" x 22-1/8" SIDE TO SIDE ADJ. PRODUCT SIZE (W X D X H) 2-1/2" (Left), 4-1/2" (right) 49-5/8" x 44-5/8" x 69-7/8" WT. (LB.) 476 3/4-TON WHEEL DOLLY • For handling of dual wheels and large single wheels MADE IN THE USA • Designed to facilitate the removal and installation of pneumatic tires and wheel assemblies found on many trucks, buses and trailers • Handles up to 52” diameter tires and wheels • The frame is constructed from heavy gauge welded tubular steel for maximum strength and durability • Load levelers aid alignment • Carriage arm rollers with self-lubricating bearings • Restraining chain with the unit to secure the load • 2 swivel ball bearing casters for easy positioning • Wide frame and lifting carriage • Handy tool/parts tray on frame • The wheel dolly is designed to be used in conjunction with jacks and jacks stands • 2 Year Warranty CAP. ASCOT NO. 407-93766 MFG. NO. HW93766 (TONS) 3/4 LIFT RANGE ARM LENGTH / SPREAD 23" / 26-1/2" 4" - 9" OVERALL SIZE (W X D X H) 39-1/2" x 38-3/4" x 32" 407-93766 WT. (LB.) 118 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

148 LIFTING EQUIPMENT Wheel Dollies (cont.) 3/4-TON WHEEL DOLLY • Dolly handles any tire diameter and up to 1500 lb. combined tire and wheel weight • Three 4" diameter swivel ball bearing caster wheels provide easy maneuverability and positioning • Travel adjustment on rear locking caster wheel matches lifting arms with spindle angle • 6' chain included to secure wheel assembly to dolly during removal and transport • Quick disconnect push/pull handle provides unobstructed access to hub area • ASSEMBLED IN THE USA TIRE DOLLIES • Heavy-duty tubular s handling 300 pounds • Eas improved “bent arm installation and minimiz rollers for simple alignmen studs • Spring-loaded kick • Can accommodat ® PROFESSIONAL LIFTING EQUIPMENT 407-82310 EASY TO POSITION 407-82320 ASCOT NO. MFG. NO. 407-82320 82320 CAP. (TONS) LIFT TRAVEL 3/4 4-3/4" LIFT ARM SIZE 26" x 24-1/2" PRODUCT SIZE (W X D X H) 43-1/2" x 39-1/2" x 35" WT. (LB.) 175 TRUCK WHEEL DOLLY • Tire/wheel is rotated left or right on tiltable roller pads for perfect stud alignment • Perfect for 8-10 hole Budd type wheels • Removes truck wheels and tires fast and easy • Increases productivity • Reduces manpower needs • Saves time and money - maintenance free • Heavy duty tubular construction lifts 280 lb. • 3" caster wheels roll the truck wheels for effortless removal or replacement 407-82312 FAST AND EASY 407-70130 ASCOT NO. MFG. NO. DESCRIPTION 407-70130 407-70132 70130 TRUCK: 8" Rollers (280 lb. Capacity) 70132 SUPER SINGLE: 14" Rollers (450 lb. Capacity) ASCOT NO. MFG. NO. 407-82310 407-82312 82310 82312 22" Narrow Single Tire Handler Dolly 26" Wide Single Tire Handler Dolly DESCRIPTION BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 149 TW2000 TWEEL HANDLER™ • The TW2000 solution is a built-in ratcheting jack with 14˚ of vertical travel • The Tweel Handler’s U-shaped chassis allows you to get close to the work area, with unhindered access to the tire in the cradle • No restraining chains are required, yet the Tweel Handler™ holds virtually any single truck wheel, including widebased singles • Three heavy-duty ball-bearing wheels mounted under ball-bearing swivel casters make it highly maneuverable ASCOT NO. MFG. NO. 407-02000 DESCRIPTION TW2000 TW2000 Tweel Handler™ 407-02000 407-03000 HEAVY DUTY TIRE DOLLY • Reduce back injuries • Perfect stud alignment • Perfect for 8 to 10-hole Budd-type wheels • Removes truck wheels and tires fast and easy • Increases productivity • Reduces manpow needs • Saves time and money, maintenance free • Works with tires 23.5" to 43.5" ASCOT NO. MFG. NO. 407-03000 104 111 112 DESCRIPTION BJ-T300A Heavy Duty Tire Dolly ASCOT NO. MFG. NO. DESCRIPTION 407-10400 407-11100 407-11200 PARTS AND ACCESSORIES FOR HEAVY DUTY TIRE DOLLY Roller Set Rubber Wheel Deep Groove Ball Bearing 116 119 120 ASCOT NO. MFG. NO. DESCRIPTION 407-11600 407-11900 407-12000 Pin Lock Rubber Cove Nylon Wheel 407-47110 SAFER-GO TRUCK TIRE DOLLY • This convenient dolly makes manually lifting wheel sets completely unnecessary • Simply slide the rollers underneath the tire and use the jack handle to raise it to the desired height • Use the included Gaither O-LINE-ER® to perfectly position the wheel for easy installation • Equipped with a collapsible handle frame making it easy to store and ideal for mobile service • LIFTING CAPACITY: 350 lbs. ASCOT NO. MFG. NO. 407-47110 G471106 DESCRIPTION Safer-Go Truck Tire Dolly WINNTEC TIRE DOLLY • 500 lb. capacity allows for use on all commercial truck tire sizes • Longer rollers (2 ½" longer) makes it even easier to handle super single sizes • Wheel position allows tech to lift tire/wheel assembly by pushing down, instead of lifting up • O-LINE-ER and Bracket included with new production models (O-LINE-ER used for lining up stud holes with studs) O-LINE-ER STUD ALIGNMENT TOOL ASCOT NO. MFG. NO. DESCRIPTION 407-47105 G471105HD Winntec Tire Dolly ASCOT NO. MFG. NO. 491-00101 DESCRIPTION GTO-01TB O-LINE-ER Stud Alignment Tool 407-47105 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

150 LIFTING EQUIPMENT Wheel Dollies (cont.) 2,000 LB. HEAVY DUTY 3-IN-1 CAR DOLLY SET • HOLDS VEHICLE: By the wheel, by the pinch weld and by the frame • No adapters required • Integrated frame adapters • Locking casters • No tools required • Adapter secured with pins • Self-stacking • Allows convenient storage • Sold in pairs of two 3/4-TON WHEEL DOLLY • Hydraulic system actuated to provide smooth, positive power for the removal and installation of single, tandem, and duplex tires and wheels • Load restraining chain for security 3/4-TON CAPACITY (1500 LBS.) CHAIN FOR LOAD RESTRAINT 407-47020 NO TOOLS REQUIRED NO ADAPTERS REQUIRED ASCOT NO. ASCOT NO. MFG. NO. DESCRIPTION 407-47020 47020 2,000 LB Heavy Duty 3-IN-1 Car Dolly Set MFG. NO. 407-47053 47053 CAP. TILT (TONS) LIFT RANGE RANGE 3/4 LIFT ARM SIZE 2-1/4" - 11" (-)2 - 5° 25-7/8" x 25-1/4" PRODUCT SIZE (W X D X H) 43-1/2" x 43" x 34-7/8" WT. (LB.) 151 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 151 ® PROFESSIONAL LIFTING EQUIPMENT WHEEL DOLLY FOR AGRICULTURAL AND EARTH MOVING MACHINERY 300 LB. CAPACITY SINGLE TIRE LIFTER • Easy and safe mounting, demounting and handling of large wheels on agricultural and earth moving machinery • Capable of handling large wheels from 45.3" up to 84.7" in diameter and up to 41.3" in depth • CAPACITY: 3,306 lbs • Double acting hydraulic system • Handsfree switch between lifting and lowering action • Safe and controlled lowering • 2 x 4 large rollers improve handling of tires with deep treads • Top-point wheel connection rod keeps the wheel in safe balance • To safely assist a technician with the removal and installation of single wheels on vehicles that are supported on a lift • Maneuverability is made easy by means of four swivel caster wheels • Two rear caster wheels include a locking mechanism which can prevent the dolly from moving • Unique offset design offers open access from the rear to mount wheel to the vehicle • Onboard rollers make for easy stud-to-hole alignment • Air-operated controls allows the unit to lift the load effortlessly • 4" low height of support legs FOUR SWIVEL CASTER WHEELS AIROPERATED CONTROLS 407-82306 EASY AND SAFE FOUR LARGE ROLLERS The Wheel Dolly for Agricultural and Earth Moving Machinery makes possible easy and safe mounting, demounting and handling of large wheels. ASCOT NO. MFG. NO. 407-90538 90538 DESCRIPTION Wheel Dolly for Agricultural and Earth Moving Machinery ASCOT NO. 407-82306 MFG. NO. 82306 CAP. (LB.) 300 LIFT TRAVEL MIN. HGT. / MAX. HGT. WIDTH LENGTH 35-1/8" 4" / 39-1/8" 9" - 22" 17-1/2" - 33-1/4" WT. (LB.) 200 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

152 LIFTING EQUIPMENT 302-81022 Vehicle Stands & Accessories UNDERHOIST STAND • Sturdy, welded steel construction for superior safety and strength • Ideal to support the exhaust system, shock absorber and other vehicle components during an under vehicle repair - Not designed to support vehicle • Acme screw allows for precise height adjustment 302-81050 ® PROFESSIONAL LIFTING EQUIPMENT 20 & 50-TON CAPACITY TRAILER STABILIZING STANDS • NEW! Now comes with wheels that allow for easier positioning under the load • Meets OSHA requirements for supporting trailer when loaded or unloaded • 14" diameter base provides maximum leveling stability • Quick adjust spin handle for ease of turning • Large diamond plate saddle to grip the load ASCOT NO. MFG. NO. 302-81022 81022A 81050 CAP. DESC. US 302-81122 81022Ai Import 302-81050 - (TONS) 20 50 MIN. HGT. / MAX. HGT. BASE SIZE SADDLE SIZE 39" / 50-5/8” 14" Diameter 4-1/2" x 5" 20 39" / 50-5/8" 14" Diameter 4-1/2" x 5" 39" / 51" 14" Diameter 8" Dia. WT. (LB.) 52 52 152 STURDY, WELDED STEEL ASCOT NO. 302-31500 302-31501 302-33020 MFG. NO. 31500 31501 33020 CAP. (TONS) 3/4 3/4 2 302-31500 302-31501 MIN. HGT. / MAX. HGT. BASE SIZE 55" / 80" 302-33020 SADDLE SIZE 12" Diameter 5-1/4" x 1-1/2" 55" / 80" 12" Diameter 5-1/4" x 1-1/2" 67" / 76-3/4" 23" x 18" 5-1/4" x 1-1/2" WT. (LB.) 33 39 53 302-81034 HYDRAULIC JACK OIL • Formulated with oxidation stable base oils, rust inhibitors, antiwear agents & antifoam agents to provide protection for hydraulic jacks and lifting equipment • 32 oz. bottle • 6 bottles per case ASCOT NO. 302-81033 302-81034 302-81035 MFG. NO. 81033A 81034A CAP. (TONS) 3/4 3/4 81035A 1-1/2 MIN. HGT. / MAX. HGT. BASE SIZE 55-1/4" / 81-1/2” 55-1/4" / 81-1/2” 48-7/8" / 85-3/8” 302-81035 SADDLE SIZE 12" Diameter 1-5/8" x 5-1/4" 12" Diameter 1-5/8" x 5-1/4" 12" Diameter 3-1/4" x 3-1/4" WT. (LB.) 35 39 39.5 3/4 & 1-1/2-TON UNDER TRAILER HOIST STANDS • Lightweight, slender design • Quick adjus spin handle with thrust bearing eliminates wear and provides ease of turning load • Foot pedal (81034A only) generates 1" additional stroke and 400 lb. of force at the saddle • Pedal may be locked in vertical position for storage or shipment 1-1/4" diameter acme threaded screw has 26-1/4” travel PROTECTS LIFTING EQUIPMENT ASCOT NO. MFG. NO. 309-00925 DESCRIPTION MAG-925 Hydraulic Jack Oil (6 per Case) 309-00925 HYDRAULIC JACK OIL ASCOT NO. MFG. NO. 309-93291 309-93294 HW93291 HW93294 DESCRIPTION 1 Quart 1 Gallon BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 153 Hydraulic Shop Presses ® PROFESSIONAL LIFTING EQUIPMENT 50 AND 100-TON CAPACITY HYDRAULIC SHOP PRESSES • For heavy duty use in truck garages and industrial work shops • Manually operated two speed pump provides quick ram travel to load • Hand operated winch raises and lowers press bed • Welded frames for strength and no assembly required • Self-retracting ram is bearing mounted for lateral movement on head channel • Delivered Fully Assembled • ASSEMBLED IN THE USA • 78057A features air/hydraulic foot pump and 10' hose • 78058A and 78110B feature electro/hydraulic pump FOR HEAVY DUTY USE 317-78058 QUICK RAM TRAVEL TO LOAD BED ASCOT NO. MFG. NO. 317-78057 78057A OPERATING SYSTEM 317-78055 78055A Manual Air/ Hydraulic 317-78058 78058A Electro/ Hydraulic 317-78077 78077 317-78078 78078 317-78110 Air/ Hydraulic Electro/ Hydraulic 78110B Electro/ Hydraulic 50 13-1/4" 100 10-1/4" 50 6-1/4" 50 13-1/4" CAP. (TONS) RAM TRAVEL 50 6-1/4" MIN. HGT. / MAX. HGT. 50 6-1/4" 7-1/2"/ 32-5/8” 7-1/2" / 32-5/8” 7-1/2" / 32-5/8” 7-1/2" / 32-5/8" 7-1/2" / 32-5/8" 18-1/4" / 45-3/4” THROAT WIDTH HEIGHT ADJ. 34-1/2" 7 x 5" 34-1/2" 7 x 5" 34-1/2" 7 x 5" 34-1/2" 7 x 5" 34-1/2" 7 x 5" 40-1/4" 8 x 4-1/2" BETWEEN UPRIGHTS 5-5/8" 5-5/8" 5-5/8" 5-5/8" 5-5/8" 5-5/8" BETWEEN BED RAILS 7-3/8" 7-3/8" 7-3/8" 7-3/8" 7-3/8" 9" WT. (LB.) 804 801 814 833 846 317-78111 1,777 78111A ARBOR PLATES (FOR USE WITH NORCO 50 AND 100-TON SHOP PRESSES) • For use with Norco 50 and 100ton shop presses only ASCOT NO. MFG. NO. 317-78056 78056A HYDRAULIC GAUGE WITH FITTING • For use with Norco 12 and 20-ton capacity shop presses only • 4" diameter face • Dial indicates internal pressure (PSI) and corresponding pounds of force at ram end • Accurate within 2-1/2% • 1/4" NPT fitting ASCOT NO. MFG. NO. 317-78021 78021 DESCRIPTION Hydraulic Gauge with Fitting. WEIGHT: 2 lb. 317-78000 ASCOT NO. MFG. NO. DESCRIPTION 317-78000 78000 12 and 20-ton capacity pair of Arbor Plates. WEIGHT: 20 lb. ARBOR PLATES (FOR USE WITH NORCO 12 AND 20-TON SHOP PRESSES) • For use with Norco 12 and 20-ton shop presses only • 1" x 4" x 10" long steel plates with “V” cutout on one edge and circle cutout on the other 317-78021 DESCRIPTION 50-ton capacity pair of Arbor Plates. WEIGHT: 108 lb. 100-ton capacity pair of Arbor Plates. WEIGHT: 153 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

154 LIFTING EQUIPMENT Hydraulic Shop Presses (cont.) 25-TON CAPACITY HYDRAULIC SHOP PRESS • Excellent for bending, bonding or straightening applications • Multi-position bed for work height adjustment • Heavy steel welded construction • Includes hand winch for easy bed adjustments 55-TON CAPACITY HYDRAULIC SHOP PRESS • Excellent for bending, bonding or straightening applications; Ideal for the removal or installation of gears, universal joints pulleys, wrist pins, and other press jobs • Heavy steel welded construction • Pressure relief valve for overload protection • Dual stage release control valve • Multi-position bed for work height adjustment STEEL WELDED DESIGN • Ideal for the removal or installation of gears, universal joints, pulleys, wrist pins, and other press jobs • 4" pressure gauge 100-TON CAPACITY HYDRAULIC SHOP PRESS MADE IN THE • Excellent for bending, bonding or straightening applications • 100-Ton Capacity • Heavy steel welded construction • Includes hand wench for easy bed adjustments • 1 HP / 2-gallon electric pump • Quiet operation meets OSHA regulations SHOP PRESS SPECIFICATIONS ASCOT NO. 317-93300 317-93400 317-93610 MFG. NO. HW93300 HW93400 HW93610 DESCRIPTION 25-Ton Shop Press with Manual Hand Pump 55-Ton Shop Press with Manual Pump 100-Ton Shop Press with Electric Pump CAPACITY (TONS) 25 55 100 STROKE 6" 6" 10" INTERIOR WIDTH 30" 35-1/2" 35-3/8" TYPE OF PUMP Air Pump BED WORKING HEIGHT Hand Pump 6-1/2" - 49-1/2" 7-1/2" - 55-1/2" Electric Pump 12-1/4" - 52-1/2" POSITIONS 8 9 6 SHIPPING WEIGHT (LB.) 484 855 1221 • Industrial hard chromeplated ram helps prevent rust and corrosion • Ideal for the removal or installation of gears, universal joints, pulleys, wrist pins, and other press jobs USA BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 155 Shop Cranes 2-TON ENGINE CRANE • Heavy duty welded construction with rugged reinforced tubular steel • Metered control release valve for lowering boom at a precisely-controlled rate of speed • Special 8 Ton hydraulic long rams are equipped with a patented built-in by-pass mechanism HEAVY DUTY STEEL DESIGN METERED CONTROL RELEASE VALVE 331-44020 2-TON ENGINE CRANE • Folds for easy storage • Mobility handle for easy movement • 3 Boom extension positions • Swivel handle hook • Manual hand pump for load lifting and control • ADJUSTS FOR WIDE CLEARANCE: One front wheel caster aids in movement FOLDS FOR EASY STORAGE MOVES EASILY WITH MOBILITY HANDLE 331-93809 SHOP CRANE SPECIFICATIONS ASCOT NO. MFG. NO. CAP. (TONS) BOOM MIN. 331-44020 331-93809 331-93806 44020 HW93809 HW93806 2 2 3 5" 5" 6-1/2" BOOM MAX. 86-1/2" 130" 144-1/2" LEG EXTENSION 90-3/4" 55" 91-1/4" SIZE 31-1/2" x 61-3/4" 28" x 75" 75" x 51" WEIGHT (LB.) 266 616 1110 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

156 LIFTING EQUIPMENT Shop Cranes (cont.) ® PROFESSIONAL LIFTING EQUIPMENT 1/2, 2 AND 3-TON CAPACITY SHOP CRANES • Designed to raise, lower and transport engines, transmissions, differentials and other heavy loads with minimal effort • Four adjustable legs provide greater stability • 1/2 and 2-ton are boom retracted • 3-ton available in either air/hydraulic or electro/hydraulic • ASSEMBLED IN THE USA ASCOT NO. MFG. NO. 331-78106 OPERATING SYSTEM 78106A Manual 331-78600 78600B Air/ Hydraulic 331-78605 78605A Electro/ Hydraulic BOOM CAP. @ LENGTH 2-Ton @ 44-3/4" 3-Ton @ 65" 2-1/2-Ton @ 81" BOOM MIN. 0" BOOM MAX. 88" LEG EXTENSION 83-1/2" 13" 149-1/2" 49", 65", 81" 13" 149-1/2" 49", 65", 81" OVERALL SIZE (W X L X H) 74-1/2" X 51-3/4" X 70-3/4" 75" X 51" X 90-1/2" 75" X 51" X 90-1/2" WEIGHT (LB.) 320 1,150 1,182 ® 331-78106 PROFESSIONAL Brake Drum Handlers BRAKE DRUM HANDLER 407-7 • Handles 15" and 16-1/2" drums • • Ball bearing wheels, semi-pneumatic tires and 3/4" diameter axle provide easy maneuverability and balance ASCOT NO. MFG. NO. LOW LIFT HEIGHT 407-72040 72040B 10-1/4" HIGH LIFT HEIGHT 15-1/4" OVERALL SIZE 21" / 62-1/2” WHEEL DIAMETER 8" WT. (LB.) 64 BRAKE DRUM HANDLER • Ideal for removing and installing truck brake drums • Works with 15" and 161/2" drums • Includes detachable handle for convenient storage ASCOT NO. MFG. NO. 407-46000 46000 BACK BUDDY II • The Back Buddy II™ rolls under and bolts onto heavy drum and hub assembly, then handily rolls the assembly out and lays it over for servicing • Re-assembly is quick and precise because the Back Buddy II™ angles for perfect hub alignment, eliminating seal damage and costly fixes • The Back Buddy II™ handles all hub and drum assemblies with Universal Receiver and Adapter Sets • Adapters 6069 and 6073 10-hole inboard and outboard application are included • Other wheel adapters sold separately 407-00350 ASCOT NO. MFG. NO. DESCRIPTION 407-00350 350B Back Buddy II DESCRIPTION Brake Drum Handler BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. ARNING: F SUPPLY CORPORATION LIFTING EQUIPMENT

1 Publizr

Index

1. 1
2. 2
3. 3
4. 4
5. 5
6. 6
7. 7
8. 8
9. 9
10. 10
11. 11
12. 12
13. 13
14. 14
15. 15
16. 16
17. 17
18. 18
19. 19
20. 20
21. 21
22. 22
23. 23
24. 24
25. 25
26. 26
27. 27
28. 28
29. 29
30. 30
31. 31
32. 32
33. 33
34. 34
35. 35
36. 36
37. 37
38. 38
39. 39
40. 40
41. 41
42. 42
43. 43
44. 44

Home