UNIVERSAL STICK ATTACHMENTS Chance All-Purpose Cotter Key Tool is for pulling and replacing hump-type cotter keys. Particularly suitable for use on clevis pins and ball socket insulators. Easy guiding of cotter key provided by contoured slot and raised eye pin. CH-M445582 Chance Knocker is designed to knock out and pull the cotter keys on fog-type insulators. The Knocker Tool is spring assisted for greater impact in restricted space and under adverse working conditions. The Knocker has a standard universal fitting at one end and a universal fitting with wing nut on the other to receive cotter key tools. CH-C4030011 Chance Bolt Head Wrench is used on 3/4'' and 5/8'' dia. bolt heads to keep bolt from turning as nut is being tightened. Extremely useful on rural ridge pin type construction. The outer edges on the wrench are tapered, so that they can be wedged between flanges on channel and bolt head to keep bolt turning. Hastings Ball Socket Adjuster is used for supporting and aligning ball socket adapter between ball fitting on disc insulator and clevis fitting on suspension or strain clamp. CH-M445588 HA-5455-29 Chance Ball Socket Adjuster is used on heavy socket clevises particularly where aluminum suspension and dead-end clamps are attached to ball and socket insulators. HA-5454-2 CH-M445587 Hastings Universal Ball Socket Fork is used for aligning and holding ball socket fittings for removal of cotter pin. Chance Adjustable Insulator Forks are designed to grasp 9'' and 10'' disk insulators used in dead-end construction, will raise most pin type insulators up to 15 lbs. Fiber jaws open and close by rotating screws. Hastings Insulator Fork clamps around 10'' disc insulator between porcelain and cap for removing single unit or holding insulator in alignment as cotter key is replaced. HA-5455-1 CH-M445567 78 Fax: 704•482•7349 LIVELINE
79 Publizr Home