VOLTAGE PHASING METERS Bierer Analog Phasing Meters are unique tools that may be used as a conventional phasing meters, or the meter probe may be used as a stand-alone voltage detector on primary or secondary voltages or capacitive test points. Available in 25kV or 35kV ranges which can be used as a stand-alone voltage detector without the second probe or a conventional phasing meter for overhead and URD applications. Phase capacitive test points. A large easy to read analog meter. Meter housing is completely shielded to minimize stray field indications. An insulated (35kV) interconnect cable with second probe. Each probe is impact and water resistant. Meter is stored in a highly durable padded carrying case. The 5-Position Selector Switch Consists of: • C - Indicates the Voltage on Capacitive Test Points • CP - Phases Using Capacitive Test Points • L - Detects Voltage on Overhead and Underground Lines • LP - Phases on Overhead and URD Primary Systems • BT - Tests Internal Meter Circuitry by Using Internal Battery Voltage, Meter should Deflect Full Scale Each kit comes standard with a straight probe (BI-81280LPM), hook probe (BI-81280LHM), 8ft. interconnect cable (BI-81280ML), 8ft. extension cable (BI-81280FL), 3kV power supply (BI-PA25T), 6VDC battery (BI-81280B1), instruction manual, padded storage case (BI-PA25B). BI-81280 BI-83280 25kV Analog Phasing Set 35kV Analog Phasing Set BI-81280 344 Fax: 704•482•7349 TEST INSTRUMENTS
345 Publizr Home