TEST INSTRUMENTS Phone: 800•438•0671 CURRENT & VOLTAGE DETECTORS Bierer VDA040P Analog Voltage Detector detects 0-40kV line to ground (0-69kV Phase to Phase). Proximity or direct contact on overhead and underground systems. Easy to read analog scale. Detect voltage from the ground on bare overhead lines when hand held. Test secondary voltage on bare or insulated cables. Test capacitive test points. Detector indicates line to ground values for nominal or induced voltages. 5 - position selector switch is calibrated for height above ground to compensate for a capacitive coupling effect. Shielded to minimize stray field interference. Detector includes overload protection up to 500kV. Internal backlight available for night use. 15kV/25kV/35kV bushing adapters are available for underground use up to 35kV. Water resistant. Each kit contains a straight probe, hook probe, instruction manual, padded carrying case. BI-VDA040P VDA040P; 0-40kV Bierer VDA0300 Analog Voltage Detector extremely wide and high voltage range for a single voltage detector. 2.4kV - 300kV Line to Ground (4kV - 500kV Phase to Phase) Voltage Range. For use with overhead transmission, distribution and URD Applications. Meter is passive, battery is only required for the test position. A linear/ logarithmic scale for better resolution from distribution to transmission systems. Meter is designed to read approximate nominal or induced voltage line to ground. Easy-to-use detector requires no voltage scale selectors or multipliers. Meter is water resistant and a strong construction to withstand wear. Each kit contains a straight probe, hook probe, instruction manual, padded carrying case. BI-VDA0300 VDA0300;2.4-300kV Bierer VDA0450 Analog Voltage Detector widest and highest voltage range available in a single voltage detector. 2.4kV - 450kV Line to Ground (4kV - 765kV Phase to Phase) Voltage Range. For use with overhead transmission, distribution and URD Applications. Meter is passive, battery is only required for the test position. A linear/logarithmic scale for better resolution from distribution to transmission systems. Meter is designed to read approximate nominal or induced voltage line to ground. Easy-to-use detector requires no voltage scale selectors or multipliers. Meter is water resistant and a strong construction to withstand wear. Each kit contains a straight probe, hook probe, instruction manual, padded carrying case. BI-VDA0450 VDA0450; 2.4-450kV BI-VDA040P 337
338 Publizr Home