RIGGING Phone: 800•438•0671 GRIPS Klein Chicago Grips for ACSR & AAC are designed with round jaws to provide maximum contact gripping power to minimize conductor deformation. The round style jaw is available either smooth or knurled. These types of grips are recommended for use on bare aluminum, aluminum conductor steel reinforced (ACSR), all aluminum conductor (AAC), copper conductors and a wide range of cables. Also available with hot-line latch for placing a grip on cable with a hot-line stick. The three notches in the hot-line latch adjust the balance of the grip to better match the direction of the cable sag. *Add H to end of part number if hot-line latch is desired. KL-1656-20 KL-1656-30 KL-1656-40 KL-1656-50 KL-1656-60 Range: 0.23- 0.39'', Max Load 4500 lbs. Range: 0.32- 0.52'', Max Load 4500 lbs. Range: 0.53- 0.74'', Max Load 8000 lbs. Range: 0.79- 1.01'', Max Load 8000 lbs. Range: 0.86- 0.96'', Max Load 8000 lbs. and KL-1656-30 Klein Chicago Grips for aluminum conductors have a light weight design for use in distribution type work. Grips have round shaped jaws to provide maximum contact with circumference of cable which makes it less likely to damage conductors. KL-1678-40 KL-1678-50 Range: 1.08- 1.14'', Max Load 5500 lbs. Range: 1.14- 1.20'', Max Load 5500 lbs. KL-1678-50 Klein Chicago Grips for weatherproof stranded and solid copper cable are designed with a round inside jaw and notches in gripping jaw to provide firm grip on insulation. *Note: Due to various types of weatherproof coatings, selection of proper grips is determined by outside of diameter cable. KL-1611-20 KL-1611-30 KL-1611-40 KL-1611-50 Range: 0.20- 0.40'', Max Load 4500 lbs. Range: 0.31- 0.53'', Max Load 4500 lbs. Range: 0.53- 0.74'', Max Load 8000 lbs. Range: 0.74- 0.86'', Max Load 8000 lbs. KL-1611-30 279
280 Publizr Home