CIRCULAR SAWS Greenlee Hydraulic Circular Saw is designed for high production utility line clearing and general tree clearing applications. Super Spool selector control for Open- and Closed-Center hydraulic systems. Safety features include: hand stop collar, trigger guard, two-step trigger and branch stop. Insulated fiberglass extension tube, tested to meet OSHA regulation 1910.269. Rugged gear motor angular head design makes flush cuts easier and directs chips away from the operator. 82" overall length and 9" diameter blade. Operating pressure of 1000-2000 psi and a flow range of 4-6 gpm. 5250 rpm At 6 gpm. GR-43180 82" OAL Stanley Hydraulic Circular Saw Stanley’s CR27 circular saw is ideal for use by right-of-way crews, utilities, parks departments and grounds keepers. Blade brake reduces blade coast time to 2.5 - 5.0 seconds compared to 15 seconds or more for tools without blade brakes. Light in weight, it features a fiberglass pole for convenient handling in tight spots and a integral motor for long, reliable service. The integral motor and motor yoke create an angled head which gives the operator more visibility when cutting and allows a more natural work position to minimize fatigue. The new position of the motor in relation to the handle creates a blade forward position which reduces torque reaction to the operator for added safety, the blade is secured with a unique double cone-lock nut. The unique trigger guard adds still more safety. If the guard is removed the saw is deactivated. A“Dual Spool” feature permits the user to operate the saw from either open or closed center circuits. All saws are individually dielectric tested before leaving the factory. 79" overall Length and 9" diameter blade. Operating pressure of 1000-2000 psi and a flow range of 5-7 gpm. SN-CR27891 79" OAL Reliable Hydraulic Circular Saw is intended for safely trimming trees from the ground or an aerial bucket. With an overall length of 79", the operator may easily reach areas not possible with a standard chain saw. 9" Blade - Allows a 3.5 inch cutting depth. The offset head provides a flush cut, from a comfortable stance, reducing operator fatigue and strain. The powerful hydraulic drive motor can easily cut branches up to 3.5 inches in a single pass. The quick stop hydraulic system reduces blade coast time for increased safety. The dielectric property of the fiberglass extension tube will reduce the chance of electric shock. For use with open center or closed center systems. RL-LR-CS-82 79" OAL 251 POWER EQUIPMENT | HYDRAULIC Phone: 800•438•0671
252 Publizr Home