HYDRAULIC PUMPS Reliable Electric Hydraulic Pump is designed for use with single or double acting 10,000 psi high pressure remote tools. The pump features intermittent duty two stage piston style pumping system, complimented by a low pressure pump for rapid tool advance. The 5/8 hp universal electric motor will operate from any 115 volt AC power supply. The unit has a 3 quart oil reservoir. Operable with toggle switch or 8' remote hand control. RL-REL-1915 Electric Hydraulic Pump, 10,000 psi, 5/8 hp RL-REL-1915 Huskie Electric Hydraulic Pump has a 1/2 Hp motor to produce 10,000 psi for use with high pressure remote hydraulic tools. Remote operated pump gives the operator complete control. Push buttons permit the user to advance and retract at will. The user is never committed to a full cycle, and can always back off at any time during the advance even under pressure. This feature increases efficiency because cuts and crimps can be adjusted as necessary, simply by stopping the advance or retract mode. A 10-foot remote control cable provides both safety and convenience. The user can set up an operation and then move away from the work site before engaging the tool. An over-ride switch on the pump allows full control at the pump motor. The low amperage of this pump allows it to be used virtually anywhere. The pressure can be easily adjusted between 4,000 and 10,000 psi. Consult factory for proper adjusting procedure. NOTE: When using any of these high pressure tools, always use 10,000 psi rated non-conductive hose. HU-R-14EF Electric Hydraulic Pump, 10,000 psi, 1/2 hp HU-R-14EF 244 Fax: 704•482•7349 POWER EQUIPMENT | HYDRAULIC
245 Publizr Home