POWER EQUIPMENT | HYDRAULIC Phone: 800•438•0671 CRIMPING TOOLS Huskie HU-EP-510H 12 ton C-type Remote Hydraulic Crimping Head has a rubber boot cover and a 1.65'' jaw opening. The remote head requires an external 10,000 psi pumping source. Accepts all "U" type dies, splices up to 600 MCM, and lugs up to 750 MCM. Comes complete with 3/8" male, screw type coupler and carrying case. HU-EP510HC 12 Ton, 'U' Type Remote Head, 1.65" Jaw Opening HU-EP510HC Huskie HU-EP-510HK 12 Ton Kearny Style Remote Hydraulic Crimping Head has a rubber boot cover and a 1-1/2'' jaw opening. The remote head requires an external 10,000 psi pumping source. Accepts all Kearny WH-2, PH-2, WH-3 type dies. Comes complete with 3/8" male, screw type coupler and carrying case. HU-EP-510HK 12 Ton, Kearney Style Remote Head, 1-1/2" Jaw Opening HU-EP-510HK Huskie HU-EP-610H 15 Ton C-type Remote Hydraulic Crimping Head with a 2" jaw opening. The remote head requires an external 10,000 psi pumping source. Accepts all Burndy "P" Type and Huskie HT-61 Series dies used in the Y-46 Tools. When used with a Huskie PU-15 die adapter it will accept all "U" Type dies used with any 12 Ton tool. This tool is primarily used for cables above 750 MCM or in cases were additional tonnage is required to compress larger lugs, terminals, and sleeves on tension connections. It is almost always used on larger underground cables up to 1000 MCM. Comes complete with 3/8" male, screw type coupler and carrying case. HU-EP-610H HU-EP-610H 15 Ton, 'U' Type, Remote Head, 2" Jaw Opening Reliable RL-REL-46 15 Ton C-type Remote Hydraulic Crimping Head with a 2'' jaw opening. The 360° rotating remote head requires an external 10,000 psi pumping source. Accepts "P" style (Y-46) dies to easily crimp connector sizes up to 1250 MCM-CU. Also accepts "U" type (Y-35) dies with the use of a PU adapter. RL-REL-46 15 Ton, 'U' Type, Remote Head, 2" Jaw Opening RL-REL-46 241
242 Publizr Home