REYNOLDSBURG ZONING CODE extends over a public right-of-way shall provide for a hold-harmless agreement with the City. 3. Roof Sign. One (1) roof sign constructed of metal with a maximum surface area of eighty (80) square feet may be located on the roof of a principal structure located in the ORD-C. Such roof sign shall be setback a minimum of five feet (5’) from the edge of the roof of the principal structure and may be illuminated with a direct light. 4. Awning Signs. A maximum of one (1) awning sign may be permitted in accordance with the provisions set forth under this subsection. All new awnings, or changes to awning colors shall be subject to a design and site plan review. Removal and replacement of awning materials that does not involve changes to the awning support structures shall be considered a sign face change. Changes to awning lettering that involve no material or color changes shall not require a zoning sign permit. Awning lettering may not exceed sixteen inches in height (16”). 5. Monument Sign. One (1) monument sign with a base constructed of brick may be installed in the ORD-C. The monument sign may be a maximum of six feet (6’) in height with a maximum surface area of twenty-four (24) square feet. Any monument sign located in accordance with this subsection shall be setback a minimum of ten feet (10’) from the front property line or easement line, as applicable. vi. Signs in Residential Zones (SR and RM Zoning Districts). Subject to the approval of the Planning and Zoning Administrator or the Planning Commission, as applicable, in conjunction with the site plan and design review process required under Section 1109.19, signs shall be permitted in the SR and RM zones as established in Table 1105.03A and in conformity with the following specific provisions: 1. Sign Lighting. The following types of lighting shall be permitted in RM zones: exterior illuminated and gooseneck lighting. Sign lighting is not permitted in SR zones. 2. Changeable Copy Types. Changeable copy types are not permitted in SR and RM zones. 3. Principal Sign Types. The following sign types shall be permitted in the SR and RM zones in accordance with the following provisions: 4. Neighborhood entry sign. One (1) or more permanent ground signs may be located on a lot or lots within a subdivision or multi-family dwelling development. When located in the public right-of-way, all such signs shall be subject to a perpetual maintenance agreement and shall not be internally illuminated. 5. Flags. Flags are permitted as a supplemental sign type in SR and RM zones. 6. Real Estate Signs. One (1) freestanding real estate sign per lot frontage is permitted on premises for individual lots or building until such lots are sold or rented in accordance with the following provisions: (a) Maximum Sign Face. Six (6) square feet. (b) Maximum Height. Five (5) feet. (c) Location Requirements. At least one foot from street right of way and at least five feet from side or rear lot lines. (d) Time Restrictions. Sold signs shall be removed within five (5) calendar days from 137
120 Publizr Home