Reservoir Stimulation Reservoir Stimulation Series Reservoir studies instruments simulate the behavior of fluids within a reservoir under varying conditions of pressure, temperature, and time. M9115 ELECTRICAL RESISTIVITY SYSTEM Features • Can perform measurement of rock electrical resistivity • Choice of either fully or partially brine saturated core sample • Resistivity Measurement based on two or four electrode method • Includes core holder and hand pump for desaturation • Burette used for core saturation determination Specifications Core Diameter: 1.5" Core Length: Up to 4" Resistivity Measurement: 2 and 4 electrodes Pressure: Up to 10,000 psi Temperature: Room Condition M9117 CAPILLARY PRESSURE & RESISTIVITY SYSTEM Features • Determines positive and negative pressure curves • Uses electrical resistivity index for core sample saturation capacity • Calculates Saturation exponent "n" • Calculates Cementation exponent "m" • Core holder of Hydrophilic and hydrophobic ceramics used for resistivity measurement • Resisitivity cell used for brine resisitivity measurement • Automated pumping system used for fluid control • Temperature-controlled bath houses entire instrument Specifications Max confining pressure: 10,000 psi (700 bar) Max pore pressure: 10,000 psi (700 bar) Working Temperature: Up to 302°F (150°C) Capillary pressure range: 145 psi (± 10 bar) Core length: up to 3 inches Core Diameter: 1.5 inches (other sizes available upon request) Power Supply: 220 VAC, 50/60 Hz Brine wetted material: Stainless Steel (with optional Hastelloy) M9130 SLIM TUBE SYSTEM Features • Determines miscibility at reservoir conditions • Raw data obtained after testing • Produced gas is measured by wet gas meter • High level of automation • Ultrasonic multiphase separator for liquid measurement • Many add on tools extend unit capabilities • Embedded gas injection pump makes safe and easy operation for user Specifications Tube Length: 80 ft. (24 m.) Tube Diameter: 1/4 inches OD tube Material: Stainless Steel Porous Media: Calibrated 230 - 310 μm silica Approx porosity: 35 % Approx pore volume: 100 cc Working Temperature: 302°F (150°C) Working Pressure: 10,000 psi (700 bar) Fluids: Oil, HC gas, CO2 Power: 220 VAC, 50 Hz 46 Data sheets and full product specifications can be found on our website at www.gic.com EOR/IOR
49 Publizr Home