Ultrasonic Cement Analyzer (UCA) UCA Series An Ultrasonic Cement Analyzer (UCA) uses ultrasonic measurements to perform compressive, non-destructive strength tests on cement slurry under controlled conditions of temperature and pressure. M7350 UCA Features M7360 HPHT UCA Features • Continuous measurement of cement sample under temperature and pressure conditions. • Pressure and temperature automatically monitored and regulated. • Easy-to-use, compact, and lightweight pressure vessel withstands up to 10,000 psi. • No sample contamination by pressurization media. • FREE advanced software is Windowscompatible. • Touchscreen controls enhance ease-of-use. • Test sequences amendable during tests. • Comprehensive data searches and management. • Control up to 8 units from 1 PC. • Reliable overtemperature, overpressure, consistency, and time protection. • Easy to clean and maintain. • Compatible with the M7355 Volumetric Cement Expansion / Shrinkage Device. Specifications Temperature Range: Ambient to 400°F (204°C) Pressure Range: Atmospheric to 10,000 psi Operating Temperature: 32-105°F (0 to ~41°C) Compressed Air Pressure Range: 50-100 psi Chiller/Cooling Water Pressure Range: 5-80 psi Utility Inlets: ¼-Inch Female NPT M7355 Volumetric Cement Expansion / Shrinkage Device 22 • Continuous measurement of cement sample under conditions of temperature and pressure. • No sample contamination by pressurization media. • Test sequences can be amended during tests. • Pressure and temperature are monitored and regulated automatically. • Easy-to-use, lightweight pressure vessel capable of up to 20,000 psi. • Compatible with the M7355 Volumetric Cement Expansion / Shrinkage Device. Specifications Temperature Range: Amb. to 400°F (204°C) Pressure Range: Atmospheric to 20,000 psi Compressed Air: 50-100 psi Chiller/Cooling Water: 5-80 psi Utility Inlets: ¼-Inch Female NPT Features • Attaches to M7350 UCA or M7360 HPHT UCA units during testing to measure volumetric expansion and shrinkage and compressive strength of cement samples. • Accessory device can connect to multiple UCA units. • Reports real-time testing data that can be exported to Microsoft Excel®. • Capable of continous measurement under HPHT conditions. • FREE advanced Grace Instrument M7355 Software can set pressure and temperature sequences. M7370 TWIN CELL UCA Features • Twin cell design that can run independent tests. • Pressure and temperature are monitored and regulated automatically. • Completely automatic pressure controlregulator adjustment not required. • User-friendly, touchscreen display. • Continuous measurement of cement sample under conditions of temperature and pressure. • No sample contamination by pressurization media. • Test sequences can be amended during tests. • Easy-to-use, lightweight pressure vessel capable of up to 10,000 psi. • Unit and chambers are easy to clean up and maintain. • Analysis software runs on Microsoft Windows. Specifications Temperature Range: Ambient to 400°F (204°C) Pressure Range: Atmospheric to 10,000 psi Coolant Supply: Tap Water or Chiller Chiller/Cooling Water Pressure: 5-80 psi Compressed Air Pressure: 60-100 psi Utility Inlets: ¼-Inch Female NPT Specifications Maximum Pressure: 20,000 psi Maximum Measurement: ± 30 ml Pressure Control: ± 25 psi Water Supply: Tap Water Power Supply: 120V, 50/60 Hz Dimensions: 19” W x 24” D x 47” H Weight: 95 lb Data sheets and full product specifications can be found on our website at www.gic.com Cement Testing
25 Publizr Home