HEAVY DUTY ALIGNMENT // ALIGNMENT 441 Heavy Duty Truck Alignment Tools, Sets, Accessories GM UPPER CONTROL ARM PUNCH • For removing the alignment inserts on the upper control arm alignment brackets without damaging the alignment bracket • Lubricate before use • Not for use with impact wrenches (air tools) ASCOT NO. MFG. NO. 247-74910 74910 DESCRIPTION GM Upper Control Arm Punch 247-74910 APPLICATIONS CHEVROLET/GM: 1989 - 1998 2WD/4WD C & K Series 1/2, 3/4 & 1 Ton Trucks,1991 & Up AWD Astro Vans & AWD Safari Vans AIR BLADDER CAMBER ADJUSTING TOOL • Air-assisted, multiple camber adjustment tool makes camber adjustment on many GM and Chrysler vehicles easier • Simply loosen the strut mount bolts, place the adjuster between the tire and strut, and inflate • To adjust camber slowly release the air until the wheel retracts to the specified alignment setting, tighten bolts and the alignment is done • INCLUDES: A specially designed, puncture resistant air bladder, 2’ air hose, a low pressure pop-off valve to prevent overinflating and an air control valve for inflating and controlled deflating ASCOT NO. MFG. NO. DESCRIPTION 228-61400 DOWTC614 Air Bladder Camber Adjusting Tool CANYON/COLORADO SOCKET Aligning these trucks can be difficult because it is impossible to access the head of the cam bolt to adjust alignment angles. • This special grooved socket fits over the end of the bolt allowing the technician to turn the alignment cams to change alignment angles after loosening the lock nut • This socket makes aligning these 4WD trucks much quicker and easier ASCOT NO. MFG. NO. 236-45938 45938 DESCRIPTION Canyon/Colorado Socket H/D STEEL WHEEL RIM STRAIGHTENING TOOL • For quick and easy removal of indenta on wheel flanges and rims of most vehicles • Allows proper tire seating, giving greater tire protection and durability • Powder coated for added durability ASCOT NO. MFG. NO. 247-08130 81309 DESCRIPTION H/D Steel Wheel Rim Straightening Tool 236-45938 INNER TIE ROD END WRENCH SET • SET INCLUDES: #89105: Dual socket inner tie rod removal tool, fits 1-3/16” or 1-5/16" he inner tie rod ends; #89106: A 1-3/16" hex tool for inner tie rod ends on Ford Escort, Tempo, Topaz, Lynx; #89107: A 1-5/16" hex tool designed for inner tie rod ends on 1986 & up Taurus/Sable; #89108: A 1-7/16" hex tool designed for GM Saginaw rack and pinions • CAUTION: No for use with impact wrenches (air tools) FORD SUPER DUTY TIE ROD SLEEVE ADJUSTER • Designed for use on the new Ford Super Duty chassis as well as most other light trucks and vans • Extra long bar gives you maximum leverage to loosen rusted sleeves without injuring your knuckles • 8-position tool allows 360° rotation without removing the adjuster block from the sleeve ASCOT NO. MFG. NO. 236-77350 77350 DESCRIPTION Ford Super Duty Tie Rod Sleeve Adjuster ASCOT NO. MFG. NO. 217-00750 99750 DESCRIPTION Turntables (Pair) ASCOT NO. MFG. NO. 227-89000 89000 DESCRIPTION Inner Tie Rod End Wrench Set TURNTABLES (PAIR) • Full floating with enclosed ball bearings • Large, easy to 236-77350 read dial is quickly adjusted to zero • Ideal for racks, pits, floor units or stands • For cars and light trucks • DIMENSIONS: 11” x 15-1/2” x 2”; WEIGHT LIMIT: 5,000 Lbs./wheel • RANGE: 100° 217-00750 228-61400 227-89000 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE ALIGNMENT // HEAVY DUTY ALIGNMENT
444 Publizr Home