WHEEL BALANCER ACCESSORIES // SERVICE EQUIPMENT 371 Balancer Chucks, Collets, Pressure Drums, Rings BALANCER CHUCKS • Balancing some light truck wheels on a cone can be challenging. The greater the offset, the greater the challenge. If the wheel is not sitting straight on the cone, balancers will give false readings • The 3-jaw chuck eliminates issues with cone seating providing the MOST ACCURATE balancing ACCURATE BALANCING WITH 3-JAW CHUCK 482-83330 ASCOT NO. MFG. NO. 482-83330 482-85856 482-81850 482-85909 482-85906 482-85907 8113330C 85000856 8111850 85009089 85009086 85009087 DESCRIPTION 40MM Standard Balancer Chuck w/Plate Extension Jaws for Standard Chuck Front Plate, Optional for Extended Jaws Front Plate 2" Heavy Duty Balancer Chuck w/Plate Front Plate 8" - 12" 12" RANGE 3.13" - 7.13" Extended to 9.125" 10" 12" COLLETS (40MM) • Built with hardened steel and designed with a low angle • Provides technicians with a durable and precise mounting method that replicates the mounting of the wheel on the vehicle • Result is a performance balance the first time, every time • The set of 40mm collets includes eight double sided collets covering a range of 2.04" - 5.32", fitting the majority of passenger car and light truck wheels • ADVANTAGES OF COATS DOUBLE SIDED COLLETS VS. STANDARD CONES: Low angle aids the technician in replicating the vehicle mounting by more closely matching the center bore of the wheel; When back coning, the shallow depth and low angle ensures the collet engages the mounting surface and ends prior to engaging the cosmetic front hubcap on plastic faced wheels BUILT WITH HARDENED STEEL PRESSURE DRUMS, RINGS 483-85610 483-10544 ASCOT NO. MFG. NO. 483-10542 8110542 483-10544 8110544 483-12012 483-12106 483-13308 8112106 ITEM 483-13308 483-85609 DESCRIPTION Small Pressure Drum 4.625" Diameter, 1.125" I.D., Fits 8112103, 85610908 and 85607503 Large Pressure Drum 5.75" Diameter, 1.125" I.D. 85608312 No-Mar Ring 8113308C XL Pressure Drum 483-13309 8113309C XL Pressure Drum 483-82954 8112954 Rubber Lip Same as 308105 except with 40mm I.D. Small Pressure Drum 4.625" Diameter, 40mm I.D. (8.375") O.D. Rubber Lip to help prevent marring the Wheel. 28mm I.D. (8.375") O.D. Rubber Lip to help prevent marring the Wheel. 40mm I.D. For Small Pressure Drum (4.625), Fits 110542 & 112106 Pressure Drums 483-85609 85609499 483-85607 483-85603 85607378 85607379 483-85608 85607380 483-85601 483-85602 85607381 85607382 483-85600 85607383 483-85604 85607384 483-85692 85607392 ASCOT NO. MFG. NO. DESCRIPTION 40MM Double sided, Low Angle Collets Double Sided Collet (1 and 2) Double Sided Collet (3 and 4) Double Sided Collet (5 and 6) Double Sided Collet (7 and 8) Double Sided Collet (9 and 10) Double Sided Collet (11 and 12) Double Sided Collet (13 and 14) Double Sided Collet (15 and 16) 2.04" - 5.30" 2.04" - 2.47" 2.45" - 2.88" 2.85" - 3.28" 3.26" - 3.69" 3.67" - 4.10" 4.08" - 4.51" 4.48" - 4.92" 4.89" - 5.32" RANGE WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT // WHEEL BALANCER ACCESSORIES
374 Publizr Home