23 AIR SYSTEMS ELECTRIC AUTOMATIC COMPRESSOR DRAIN AUTOMATIC COMPRESSOR DRAIN • Automatically drains filters, compressor tanks, drip legs, aftercoolers and receivers • Opens and closes valve in 1 to 60 minute cycle times and 1 to 30 second blow down time • 1/4" NPT connection • Includes Y-strainer ASCOT NO. MFG. NO. 117-05702 5702S DESCRIPTION Electric Automatic Compressor Drain MINI IN-LINE DISPOSABLE DESICCANT DRYER • Point-of-use, patented, disposable, mini in-line desiccant dryer removes water vapor, oil vapor and dirt • Point-of-use on blow guns or spray guns as final protection for critical parts during blow off and paint spraying • See-through housing shows desiccant bead color change from blue to pink indicating dryer needs to be replaced • 1/4" NPT connection ASCOT NO. MFG. NO. 117-00010 DFD-10 DESCRIPTION QTY. Disposable Desiccant Dryer 2 117-00010 HOW TO DETERMINE THE GALLONS OF WATER ACCUMULATED PER 8 HOURS OF USE Follow the steps below to determine the gallons of water accumulated by a compressed air system per 8 hours of use: 1. Determine the ambient temperature (outside temperature surrounding the dryer) and relative humidity. 2. Locate ambient temperature in first column of water factor chart. 3. Follow the row over to percent of humidity. This indicates the number of gallons accumulated by your air compressor in an 8-hour period. 4 Select the SCFM requirement for your dryer based on the SCFM coming out the air compressor 5 Once the correct HP rating has been selected based on the air volume requirements, you will need to know the type of available electric service to determine the need for a single phase or three phase compressor. Ambient Air Temperature 120°F 110°F 100°F 90°F 80°F 70°F 60°F 50°F 40°F 30°F 20°F 10°F 20% Humidity 18.6 14.1 10.5 7.8 5.7 3.9 2.7 2.1 1.2 .9 .6 .3 30% Humidity 27.9 21.0 15.6 11.4 8.4 6.0 4.2 3.0 2.1 1.2 .9 .5 40% Humidity 50% Humidity 46.5 35.1 26.1 19.2 13.8 9.9 6.9 4.8 3.3 2.1 1.5 .8 60% Humidity 55.8 42.0 31.2 23.1 16.8 12.0 8.4 6.0 3.9 2.7 1.7 1.0 70% Humidity GALLONS OF WATER PER 8 HOURS @ 100 SCFM 37.2 27.9 20.7 15.3 11.1 7.8 5.7 3.9 2.7 1.8 1.2 .7 65.1 48.9 36.6 26.7 19.5 13.8 9.9 6.9 4.8 3.0 1.9 1.2 80% Humidity 74.4 55.8 41.7 30.6 22.2 15.9 11.1 7.8 5.4 3.6 2.1 1.4 90% Humidity 83.7 63.0 46.8 34.5 24.9 18.0 12.6 8.7 6.0 3.9 2.4 1.5 100% Humidity 93.0 69.9 52.2 38.4 27.9 19.8 14.1 9.9 6.6 4.5 2.7 1.8 Water factor chart number is 31.2 Compressed air system accumulates 31.2 gallons of water per 8 hours of use. EXAMPLE: 25HP air compressor delivers 100 SCFM. Ambient Temp. = 100°F Relative Humidity = 60% IN-LINE AIR TOOL FILTER • In-line filter protects air tools from dirt and debris • 1-9/16" length, 1/2 oz. • 40 micron sintered bronze element • Inlet can be attached directly to pneumatic tools • 1/4" male x 1/4" female NPT ASCOT NO. MFG. NO. 117-09132 9132 DESCRIPTION In-Line Air Tool Filter 117-09132 ASCOT NO. MFG. NO. 117-05304 DESCRIPTION T53-04W Automatic Drain 117-05304 117-05702 • Automatically expels liquids from piping network in compressed air systems • Use in low spots in an air system where water accumulates • Float type drain features a protective stainless steel screen with umbrella baffle, providing large sump area for oil, sludge and dirt • 1/2" NPT top threaded port BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS
25 Publizr Home