237 VALVE HARDWARE METAL GROMMET REMOVAL TOOL • Makes grommet and me removal easy and safe • Made in the US 469-04700 MADE IN THE USA PRE-SET TORQUE TOOLS FOR TPMS ASCOT NO. MFG. NO. DESCRIPTION 469-04700 4700 • Never adjust a TPMS torque wrench again • Durable and long-lasting • NO MORE TORQUE ERRORS: It is either “Hi” or “Low” • Ergonomically designed hand grip • Open cross chamber on the 5565 allows for extra leverage bar Metal Grommet Removal Tool CORE CAP REMOVAL TOOL • Easily installs and removes valve capsand valve cores • Two-in-one tool ASCOT NO. MFG. NO. DESCRIPTION 469-20250 20250 469-20250 Core/Cap Removal Tool ASCOT NO. MFG. NO. 469-05540 469-05565 5540 5565 TPMS VALVE STEM FISHING TOOL 469-20144 GROMMET INSTALLATION/ REMOVAL TOOL ASCOT NO. MFG. NO. 469-20144 20144 • Secures TPMS sensor to wheel during demount • One handle end can be used as a deflator; the other as a core remover • 3" Overall length DESCRIPTION Grommet Installation/ Removal Tool SCREWDRIVER/CORE TOOL • Lock-On Feature For The Valve Core • Metal Pocket Clip • Flat-Head Screwdriver Tip ASCOT NO. MFG. NO. DESCRIPTION 469-00673 673-D Screwdriver/Core Tool VALVE CORE TOOLS: SCREWDRIVER TYPE & STANDARD BORE LONG VALVE • Has a plastic screwdriver handle for better grip and leverage ASCOT NO. MFG. NO. 469-00607 607 469-00612 612 DESCRIPTION Screwdriver Type Valve Core Tool Standard Bore Long Valve Core Tool 469-0060 1/4" SOCKET DRIVER • Durable screwdriver handle and a chrome vanadium shank • Ideal for use with the TPMS 11mm x 12mm flip socket • 6" Overall Length, 2-1/2" Shank Length • MADE IN THE USA 319-72521 ASCOT NO. MFG. NO. 319-72521 7252100 BUYER'S GUIDE DESCRIPTION 1/4" Socket Driver ASCOT SUPPLY CORPORATION ASCOT NO. MFG. NO. 469-08910 8910 DESCRIPTION TPMS Valve Stem Fishing T 469-08910 DESCRIPTION TPMS Preset Torque Tool: Preset at 40 in./lb. TPMS Preset Torque Tool: Preset at 65 in./lb. 565 469-05 46 TIRE DEFLATOR SET FOR TPMS VALVE STEMS ASCOT NO. MFG. NO. DESCRIPTION 469-19860 19860 MADE IN THE USA 469-00612 ASCOT NO. MFG. NO. DESCRIPTION 469-00021 TL-615 TIRE DEFLATOR SET MADE IN THE USA • Simply replace a standard sized valve cap with this handy tool and the special design will depress the pin in the valve core • Large openings on the sides of the tool allow air to escape quickly from the tire • Tools are marked so tires can be returned to their original position on the vehicle so TPMS will not need to be reset • Also saves time since the valve core has not been removed from the sensor • Packaged in a set of 4 ASCOT NO. MFG. NO. 469-51632 TD-1808 DESCRIPTION Tire Deflator Set WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION Tire Deflator/Valve Core Remover TIRE DEFLATOR/VALVE CORE REMOVER • Screws on TPMS valve stems to deflate the tire without removing the valve core 469-19860 Tire Deflator Set for TPMS Valve Stems 469-00021 469-51632 VALVE HARDWARE
239 Publizr Home