Table of Contents VIPER NOZZLES Page Select Gallonage ......................................................................... 4-5 Blue Devil Select ........................................................................ 6-7 Constant Gallonage .................................................................... 8-9 Automatic ................................................................................... 10-11 Industrial .................................................................................... 12-13 Foam Equipment ........................................................................ 14-15 NOZZLES Ball Shutoffs ............................................................................... 16-17 Small Dual Range Tips ............................................................... 18 Small Constant Flow Tips ........................................................... 19 Smooth Bores and Stacked Tips ................................................. 20 Piercing Nozzle .......................................................................... 21 Smooth Bore Combos & CAFS .................................................. 22 Combo “Break-Apart” Nozzles .................................................. 23 FORESTRY PRODUCTS Wildland Equipment ................................................................... 24 Hose Coilers ............................................................................... 25 GENFO Water Backpacks .......................................................... 26 Drip Torch .................................................................................. 27 Foam Gun Proportioner .............................................................. 28 High-Viz™ (High Visibility Products) ....................................... 29 WATERFLOW ACCESSORIES Wye Valves ................................................................................. 30-31 Hydrant Accessories .................................................................. 32 Hose Handler High-Rise Pack .................................................... 33 Brass Ball Valves/Strainers ........................................................ 34 Adapters & Reducers .................................................................. 35 Repair Parts VIPER Repair Parts .................................................................... 36-37 TECHNICAL DATA Flow Data ................................................................................... 38-40 Cross Reference.......................................................................... 41-42 Viper Valve Diagram/Maintenance ............................................ 43-44 **Nozzle Selling Basics** ......................................................... 45-46 Ordering and Warranty ............................................................... 47 888-663-4966
2017 Featured Products High-Viz™ Hello, The background to High Visibility products is from my experience as a wildland firefighter. I was on a type II crew which was often tasked with mop-up. I wanted to reduce some of the hazards I experienced during mop-up. When working a wildland fire one often follows the line, which is where T-valves and wyes like to hide. I have tripped over move T-Valves and leader wyes than you can shake a stick at. The problem is that their color blends into the black. After multiple days on the same fire we just aren’t as sharp as we should be. No longer! With C & S High Viz™ products a firefighter can easily see their water flow accessories and avoid the tripping hazard. Even during night ops, thanks to our ORALITE® reflective tape, the High Viz™ products jump out. The second problem I wanted to solve was finding these items inside of cabinetry. During first response, a firefighter is challenged with finding exactly the right tool without delay. Unfortunately, many engines are restocked in a haphazard manner, especially during a busy season. With C & S High Viz™ Wildland products a firefighter can more easily see exactly what they are looking for. Chris Willis Director of Sales & Marketing CSsupplyinc.com
VIPER - SELECT GALLONAGE High performance nozzles with select flows SG1560 High quality, high performance nozzle with flows from 15 to 60 GPM. 1" Select Gallonage nozzle with ball shutoff and pistol grip. Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Selection ring has 4 flow positions without pattern change Viper Select Gallonage offers constant gallonage in all positions 15-30-50-60 GPM @ 100 psi (50 psi and 75 psi options available) FLUSH without shutting down 1" swivel inlet NST or NPSH threads Wt: 3.44 lbs. Length: 7.87" SG3012 Our most versatile and popular nozzle. Flows from 30 to 125 GPM. 1.5" Select Gallonage nozzle with ball shutoff and pistol grip. Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Selection ring has 4 flow positions without pattern change Viper Select Gallonage offers constant gallonage in all positions 30-60-95-125 GPM @ 100 psi (50 psi and 75 psi options available) FLUSH without shutting down 1.5" swivel inlet NST or NPSH threads Wt: 4.5 lbs. Length: 8.85" Available as 1.5” NST tip SG1560TIPONLY Available without pistol grip: SG1560NPG Available as 1.5” NST tip SG3012TIPONLY Available without pistol grip: SG3012NPG SG7515 Ideal for municipal and industrial applications. Flows from 75 to 150 GPM. 1.5" Select Gallonage nozzle with ball shutoff and pistol grip. Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Selection ring has 4 flow positions without pattern change Viper Select Gallonage offers constant gallonage in all positions 75-100-125-150 GPM @ 100 psi (75 psi option available) FLUSH without shutting down 1.5" swivel inlet NST or NPSH threads Wt: 4.5 lbs. Length: 8.85" 888-663-4966 Available as 1.5” NST tip SG7515TIPONLY Available without pistol grip: SG7515NPG
VIPER - SELECT GALLONAGE High performance nozzles with select flows SG9520 1.5” Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Selection ring has 4 flow positions without pattern change Viper Select Gallonage offers constant gallonage in all positions 95-125-150-200 GPM @ 100 psi (50 psi and 75 psi options available) FLUSH without shutting down Swivel inlet 1.5” NST or NPSH or 2.5” NST ONLY threads Wt: 7 lbs. Length: 11.2" Wt: 7.5 lbs. Length: 12.8” SG9520 2.5” High quality, high performance nozzle with flows from 95 to 200 GPM. 1.5" or 2.5” Select Gallonage nozzle with ball shutoff and pistol grip. Available without pistol grip: SG9520NPG 1.5 Available as 1.5” NST tip SG9520TIPONLY SG12250 2.5” Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Selection ring has 4 flow positions without pattern change Viper Select Gallonage offers constant gallonage in all positions 125-150-200-250 GPM @ 100 psi (75 psi option available) FLUSH without shutting down Swivel inlet 1.5” NST or NPSH or 2.5” NST ONLY threads Wt: 7.5 lbs. Length: 12.8" Wt: 7 lbs. Length: 11.2" Available without pistol grip: SG9520NPG 2.5” SG12250 1.5” Ideal for municipal and industrial applications, where higher flow is needed. Flows from 125 to 250 GPM. 2.5" or 1.5” Select Gallonage nozzle with ball shutoff and pistol grip. Available without pistol grip: SG12250NPG 2.5” Available as 1.5” NST tip SG9520TIPONLY CSsupplyinc.com Available without pistol grip: SG12250NPG 1.5”
VIPER - SELECT GALLONAGE High performance nozzles with select flows BD550 (replaced BDS752) 5-10-25-50 GPM @ 100PSI 1” Swivel BD1560 15-30-50-60 GPM @ 100PSI 1” Swivel Wt: 3.6 lbs. Length: 8.5" Wt: 3.6 lbs. Length: 8.5" Features and Specifications NFPA 1964 compliant (EN 15182-4 TYPE 3 certified) New 90 degree rotation from 30 degree fog to straight stream (one twist of the hand) Raised lug indicators on the selector and fog barrels for easier pattern and flow identification No teeth to break - Rylostatic teeth in the nozzle head to break up the water but not cause fingers in the stream like traditional fixed teeth Metal ball with front and rear seals to work under higher pressures (max 580psi) Deeper ribs in selector ring for better grip 4 or 5 setting selection ring without pattern change FLUSH without shutting down Constant flow through fog and straight stream Standard operating pressure@ 100 psi (75psi and 50psi operating pressures available as well) Swivel inlet 1” and 1.5” NST or NPSH threads. (2.5” threads NST ONLY) BD3012 30-60-95-125 GPM @ 100PSI 1.5” Swivel BD3015 Wt: 4.2 lbs. Length: 9.88" 30-60-95-125-150 GPM @ 100PSI 1.5” Swivel Wt: 4.2 lbs. Length: 9.88" BD7515 75-100-125-150 GPM @ 100PSI 1.5” Swivel Wt: 4.2 lbs. Length: 9.88" 888-663-4966
VIPER - SELECT GALLONAGE High performance nozzles with select flows BD9520 1.5” 95-125-150-200 GPM @ 100PSI 1.5” Swivel BD9520 2.5” 95-125-150-200 GPM @ 100PSI 2.5” Swivel Wt: 6.8 lbs. Length: 11" Wt: 7.8 lbs. Length: 12.75" Indicator Lugs Metal Ball Inlet Screen One turn of the hand from fog to straight stream Rylostatic Teeth BD12250 1.5” 125-150-200-250 GPM @ 100PSI 1.5” Swivel BD12250 2.5” 125-150-200-250 GPM @ 100PSI 2.5” Swivel Wt: 6.8lbs. Length: 11" Wt: 7.8 lbs. Length: 12.75" CSsupplyinc.com
VIPER - CONSTANT GALLONAGE Heavy-duty, professional constant flow nozzles CG1550 Great all-around industrial or forestry nozzle. 1" Constant Flow nozzle 30 or 40 GPM with ball shutoff and pistol grip. Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability Constant flow through fog and straight stream BIMATIC flush system allows flush without shutting down The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Constant Flow- 30 GPM @ 100 psi (Standard) 1” swivel inlet NST or NPSH threads Wt: 3.5 lbs. Length: 9.25" Available without pistol grip: CG1550NPG 100PSI 75PSI 50PSI Available as 1.5” NST tip CG1550TIPONLY Available Flow Configurations CG1550 30GPM ● N/A N/A 40GPM ● N/A N/A CG2510 Versatile nozzle, good for many applications. 1.5" Constant Flow nozzle 60 or 95 GPM with ball shutoff and pistol grip. Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability Constant flow through fog and straight stream BIMATIC flush system allows flush without shutting down The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Constant Flow– 95 GPM @ 100 psi (Standard) 1.5” swivel inlet NST or NPSH threads Wt: 4 lbs. Length: 9.84" Available without pistol grip: CG2510NPG 100PSI 75PSI 50PSI Available as 1.5” NST tip CG2510TIPONLY Available Flow Configurations CG2510 60 GPM 95 GPM ● ● ● ● ● ● CG5016 Versatile nozzle, good for many applications. 1.5" Constant Flow nozzle 125 or 150 GPM with ball shutoff and pistol grip. Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability Constant flow through fog and straight stream BIMATIC flush system allows flush without shutting down The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Constant Flow– 125 GPM @ 100 psi (Standard) 1.5” swivel inlet NST or NPSH threads Wt: 4 lbs. Length: 9.84" Available without pistol grip: CG5016NPG 888-663-4966 100PSI 75PSI 50PSI Available as 1.5” NST tip CG5016TIPONLY Available Flow Configurations CG5016 125 GPM 150GPM ● ● ● ● N/A N/A
VIPER - CONSTANT GALLONAGE Heavy-duty, professional constant flow nozzles CG8020 1.5” Ideal for municipal and industrial applications, where higher flow is needed. 1.5" Constant Flow nozzle 150, 175, 200 or 250 GPM with ball shutoff and pistol grip. Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability Constant flow through fog and straight stream BIMATIC flush system allows flush without shutting down The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Constant Flow– 200 GPM @ 100 psi (Standard) 1.5” swivel inlet NST or NPSH threads Wt: 6.5 lbs. Length: 11.2" Available without pistol grip: CG8020NPG 1.5” ● ● ● Available as 1.5” NST tip CG8020TIPONLY Available Flow Configurations CG8020 150 GPM 175 GPM 200 GPM 250 GPM 100PSI 75PSI 50PSI ● ● ● ● ● ● ● ● N/A CG8020 2.5” Ideal for municipal and industrial applications, where higher flow is needed. 2.5" Constant Flow nozzle 150, 175, 200, or 250 GPM with ball shutoff and pistol grip. Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability Constant flow through fog and straight stream BIMATIC flush system allows flush without shutting down The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Constant Flow– 200 GPM @ 100 psi (Standard) 2.5" swivel inlet NST threads ONLY Wt: 7.5 lbs. Length: 13" Available without pistol grip: CG8020NPG 2.5” ● ● ● Available as 1.5” NST tip CG8020TIPONLY Available Flow Configurations CG8020 150 GPM 175 GPM 200 GPM 250 GPM 100PSI 75PSI 50PSI ● ● ● ● ● ● ● ● N/A VBPP-CG8020 Ideal for municipal and industrial applications, where higher flow is needed. 2.5" Constant Flow nozzle 250 GPM with ball shutoff and playpipe. Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability Constant flow through fog and straight stream BIMATIC flush system allows flush without shutting down The Spinning Teeth offer a wide, complete coverage fog pattern Playpipe Constant Flow– 250 GPM @ 100 psi (Standard) 2.5" swivel inlet NST threads ONLY Wt: 10 lbs. Length: 22" CSsupplyinc.com SEE FLOW DATA ABOVE
VIPER - AUTOMATIC GALLONAGE Automatic nozzles with modulated flows FT1550 Large flow ranges at 100 psi at the nozzle. (50 psi and 75 psi operating pressures available) 1" Automatic nozzle flows 15 to 50 GPM with ball shutoff and pistol grip. Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability Constant flow through fog and straight stream BIMATIC flush system allows flush without shutting down The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Flow – 15 to 50 GPM 1 ” swivel inlet NST or NPSH threads Wt: 4 lbs. Length: 9.25" Available as 1.5” NST tip FT1550TIPONLY Available without pistol grip: FT1550NPG FT2510 Large flow ranges at 100 psi at the nozzle. (50 psi and 75 psi operating pressures available) 1.5" Automatic nozzle flows 25 to 100 GPM with ball shutoff and pistol grip. Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability Constant flow through fog and straight stream BIMATIC flush system allows flush without shutting down The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Flow – 25 to 100 GPM 1.5” swivel inlet NST or NPSH threads Wt: 5 lbs. Length: 9.84" Available as 1.5” NST tip FT2510TIPONLY Available without pistol grip: FT2510NPG FT5016 Large flow ranges at 100 psi at the nozzle. (75 psi operating pressure available) 1.5" Automatic nozzle flows 50 to 160 GPM with ball shutoff and pistol grip. Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability Constant flow through fog and straight stream BIMATIC flush system allows flush without shutting down The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Flow – 50 to 160 GPM 1.5” swivel inlet NST or NPSH threads Wt: 5 lbs. Length: 9.84" 888-663-4966 Available as 1.5” NST tip FT5016TIPONLY Available without pistol grip: FT5016NPG
VIPER - AUTOMATIC GALLONAGE Automatic nozzles with modulated flows FT8020 1.5” Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability Constant flow through fog and straight stream BIMATIC flush system allows flush without shutting down The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Flow – 80 to 200 GPM 1.5” swivel inlet NST or NPSH threads or 2.5” swivel inlet NST ONLY Wt: 6.5 lbs. Length: 11.2" Wt: 7.5 lbs. Length: 13" FT8020 2 1/2” Large flow ranges at 100 psi at the nozzle. (50 psi and 75 psi operating pressures available) 1.5" or 2.5” Automatic nozzle flows 80 to 200 GPM with ball shutoff and pistol grip. Available as 1.5” NST tip FT8020TIPONLY Available without pistol grip: FT8020NPG 1.5” FT12250 1.5” Features and Specifications: Nozzles are extruded with E-LITE alloy Hard-coated for corrosion protection and durability Constant flow through fog and straight stream BIMATIC flush system allows flush without shutting down The Spinning Teeth offer a wide, complete coverage fog pattern Pistol Grip is comfortable and durable Flow – 125 to 250 GPM 1.5” swivel inlet NST or NPSH threads or 2.5” swivel inlet NST ONLY Wt: 6.5 lbs. Length: 11.2" Wt: 7.5 lbs. Length: 13" Available without pistol grip: FT8020NPG 2.5” FT12250 2.5” Large flow ranges at 100 psi at the nozzle. (75 psi operating pressure available) 2.5" or 1.5” Automatic nozzle flows 125 to 250 GPM with ball shutoff and pistol grip. Available without pistol grip: FT12250NPG 1.5” Available as 1.5” NST tip FT12250TIPONLY Available without pistol grip: FT12250NPG 2.5” CSsupplyinc.com
VIPER - INDUSTRIAL NOZZLES Heavy-duty inexpensive nozzles ST1530-PV 1" Constant Flow nozzle 30 GPM with ball shutoff and pistol grip. Features and Specifications: Can be used as a break-apart Large protective rubber bumpers Tip twists to shut off Safe and durable (individually tested) Shutoff handles available in colors to match pre-connect lines: Black, Red, Yellow, Orange, Blue, Green 30 GPM @ 100 psi 1” swivel NST or NPSH Break-apart tip is 1” rigid base NST or NPSH Wt: 3.5 lbs. Length: 9.45" ST2510-PV 1 1/2" Constant Flow nozzle 95 GPM with ball shutoff and pistol grip. Features and Specifications: Can be used as a break-apart (NST Model Only) Large protective rubber bumpers Tip twists to shut off Safe and durable (individually tested) Shutoff handles available in colors to match pre-connect lines: Black, Red, Yellow, Orange, Blue, Green 95 GPM @ 100 psi 1 1/2” swivel NST or NPSH Break-apart tip is 1 1/2” rigid base NST Only Wt: 3.5 lbs. Length: 10.6" ST5016-PV 1 1/2" Constant Flow nozzle 125 GPM with ball shutoff and pistol grip. Features and Specifications: Can be used as a break-apart (NST Model Only) Large protective rubber bumpers Tip twists to shut off Safe and durable (individually tested) Shutoff handles available in colors to match pre-connect lines: Black, Red, Yellow, Orange, Blue, Green 125 GPM @ 100 psi 1 1/2” swivel NST or NPSH Break-apart tip is 1 1/2” rigid base NST Only Wt: 3.5 lbs. Length: 10.6" 888-663-4966
VIPER - INDUSTRIAL NOZZLES Heavy-duty inexpensive nozzles ST2510-PV 2.5” 2.5" Constant Flow nozzle 95 GPM with ball shutoff and pistol grip. Features and Specifications: Can be used as a break-apart Large protective rubber bumpers Tip twists to shut off Safe and durable (individually tested) Shutoff handles available in colors to match pre-connect lines: Black, Red, Yellow, Orange, Blue, Green 95 GPM @ 100 psi 2.5” swivel NST Only Break-apart tip is 1.5” rigid base NST Only Wt: 6.2 lbs. Length: 13.25” ST5016-PV 2.5” 2.5" Constant Flow nozzle 125 GPM with ball shutoff and pistol grip. Features and Specifications: Can be used as a break-apart Large protective rubber bumpers Tip twists to shut off Safe and durable (individually tested) Shutoff handles available in colors to match pre-connect lines: Black, Red, Yellow, Orange, Blue, Green 125 GPM @ 100 psi 2.5” swivel NST Only Break-apart tip is 1.5” rigid base NST Only Wt: 6.2 lbs. Length: 13.25” VTE1550-B Composite Nozzle 30 GPM Constant Flow 1” NST or NPSH Wt: 1 lb. Length: 5” VTE2510 Composite Nozzle 95 GPM Constant Flow 1.5” NST or NPSH Wt: 1 lb. Length: 5” ST5016 TIP 125 GPM Constant Flow Spinning teeth 1.5” NST Wt: 1 lb. Length: 5” ST2510-B TIP 95 GPM BRASS Constant Flow Spinning teeth 1.5” NST Wt: 2.6 lb. Length: 5” Black Knight Fiberglass Reinforced Composite 95 GPM Constant Flow 1.5” NST or NPSH Wt: 1 lb. Length: 5” ST2510 TIP 95 GPM Constant Flow Spinning teeth 1.5” NST Wt: 1 lb. Length: 5” CSsupplyinc.com
PORTABLE FOAM EQUIPMENT Simple, Lightweight and Durable BYPP1550-DIAL Foam Eductor with Water Bypass & Metering Dial 30 GPM Utilizes the Inline Venturi System 48” pickup tube .5%, 1%, 3%, & 6% percentage metering dial Check-ball to prevent back flow into foam concentrate Fully tested with Viper SG and CG nozzles 1" rigid thread NST Wt: 3.2 lbs. Length: 6.4" BYPP3012-DIAL Foam Eductor with Water Bypass & Metering Dial 60 GPM Utilizes the Inline Venturi System 48” pickup tube .5%, 1%, 3%, & 6% percentage metering dial Check-ball to prevent back flow into foam concentrate Fully tested with Viper SG and CG nozzles 1.5" rigid thread NST Wt: 3.2 lbs. Length: 6.4" BYPP7515-DIAL Foam Eductor with Water Bypass & Metering Dial 95 GPM Utilizes the Inline Venturi System 48” pickup tube .5%, 1%, 3%, & 6% percentage metering dial Check-ball to prevent back flow into foam concentrate Fully tested with Viper SG and CG nozzles 1.5" rigid thread NST Wt: 3.2 lbs. Length: 6.4" BYPP9520-DIAL Foam Eductor with Water Bypass & Metering Dial 125 GPM Utilizes the Inline Venturi System 48” pickup tube .5%, 1%, 3%, & 6% percentage metering dial Check-ball to prevent back flow into foam concentrate Fully tested with Viper SG and CG nozzles 1.5" rigid thread NST Wt: 3.2 lbs. Length: 6.4" Truck Hose 888-663-4966 BYPP7515 Foam Eductor with Single metering disc 3% & 6% discs included Wt: 2.8 lbs. Length: 1” BYPP3012 Foam Eductor with Single metering disc 3% & 6% discs included Wt: 2.8 lbs. Length: 1” BYPP1550 Foam Eductor with Single metering disc 3% & 6% discs included Wt: 2.8 lbs. Length: 6.4” BYPP
PORTABLE FOAM EQUIPMENT Simple, Lightweight and Durable PVB 1560 The complete foam nozzle 30 GPM 1" Swivel NST or NPSH Expansion rate from 8:1 to 12:1 Wt: 3 lbs. Length: 15.5" PVB 3012 The complete foam nozzle 60 GPM 1.5" Swivel NST or NPSH Expansion rate from 8:1 to 12:1 Wt: 3.5 lbs. Length: 19" VIPER Nozzle PVB 7515 The complete foam nozzle 95 GPM 1.5" Swivel NST or NPSH Expansion rate from 8:1 to 12:1 Wt: 3.5 lbs. Length: 19" Available without pistol grip: PVB7515NPG CEP 1560 Foam tube designed to easily clamp on Viper SG1560, BD550 and BD1560 Lightweight and easily attached Expansion rate from 8:1 to 12:1 Wt: 1 lb. Length: 12" Available as 1.5” NST tip PVB7515TIPONLY Available without pistol grip: PVB3012NPG Available as 1.5” NST tip PVB3012TIPONLY Available without pistol grip: PVB1560NPG CEP 3012 Foam tube designed to easily clamp on Viper SG FT and CG nozzles Lightweight and easily attached For: SG3012 / SG7515 / SG9520 CG2510 / CG5016 / CG8020 FT2510 / FT5016 / FT8020 Expansion rate from 8:1 to 12:1 Wt: 2 lbs. Length: 16" CSsupplyinc.com
BALL SHUTOFFS Economical, Lightweight, Easy to Operate VB1560 Made of extruded E-Lite alloy and hard coated Light-weight and durable Quality polymer balls & seats and shutoff handles Smooth full 1” waterway Full time swivel Comfortable pistol grip 1" Swivel Fe. NST or NPSH x 1” M. NST or NPSH Wt: 2.5 lbs. VB3012 Made of extruded E-Lite alloy and hard coated Light-weight and durable Quality polymer balls & seats and shutoff handles Smooth full 1” waterway Full time swivel Comfortable pistol grip 1.5" Swivel Fe. NST or NPSH x 1.5” M. NST or NPSH Wt: 2.5 lbs. VB9520 Made of extruded E-Lite alloy and hard coated Light-weight and durable Quality polymer balls & seats and shutoff handles Smooth full 1 3/8” waterway Full time swivel Comfortable pistol grip 1.5" Swivel Fe. NST or NPSH x 1.5” M. NST or NPSH Wt: 4 lbs. VB9520 2.5” Made of extruded E-Lite alloy and hard coated Light-weight and durable Quality polymer balls & seats and shutoff handles Smooth full 1 3/8” waterway Full time swivel Comfortable pistol grip 2.5" Swivel Fe. NST x 1.5” M. NST or NPSH Wt: 5 lbs. VBPP9520 2.5” Made of extruded E-Lite alloy and hard coated Light-weight and durable Quality polymer balls & seats and shutoff handles Smooth full 1 3/8” waterway Full time swivel Wrap around playpipe handles 2.5" Swivel Fe. NST x 1.5” M. NST Wt: 5 lbs. 888-663-4966 Also Available without Pistol grip VB9520NPG 2 1/2” Also Available without Pistol grip VB9520NPG Also Available with metal handle VB3012-M Also Available with metal handle VB1560-M
BALL SHUTOFFS Economical, Lightweight, Easy to Operate SBV10SS-M Made of hard coated Aluminum Light-weight and durable Quality polymer balls & seats Cast aluminum shutoff handle Smooth full 1” waterway 1" Swivel Fe. NST or NPSH x 1” M. NST or NPSH Wt: 1.2 lbs. SBV10SS Made of hard coated Aluminum Light-weight and durable Quality polymer balls & seats and shutoff handles Smooth full 1” waterway 1" Swivel Fe. NST or NPSH x 1” M. NST or NPSH Wt: 1 lb. SBV15SS-M Made of hard coated Aluminum Light-weight and durable Quality polymer balls & seats Cast aluminum shutoff handle Smooth full 1” waterway 1.5" Swivel Fe. NST or NPSH x 1.5” M. NST or NPSH Wt: 1.2 lbs. SBV15SS Made of hard coated Aluminum Light-weight and durable Quality polymer balls & seats and shutoff handles Smooth full 1” waterway 1.5" Swivel Fe. NST or NPSH x 1.5” M. NST or NPSH Wt: 1.5 lbs. SBV25SS Made of hard coated Aluminum Light-weight and durable Smooth 2 1/4” waterway Cast aluminum shutoff handle Quarter turn handle 2.5" Swivel Fe. NST x 2.5” M. NST Wt: 4 lbs. CSsupplyinc.com
SMALL DUAL FLOW TIPS Durable and Economical All C&S Nozzle Tips can be combined with a C&S Shutoff valve to make a custom ‘Combo’ nozzle Dual Flow Nozzles are constructed of hard anodized aluminum and stainless steel components Most come with a heavy duty rubber bumper for added protection (Exception: Bumperless models) Flow from 5 GPM to 90 GPM 105/15 NEW LOWER FLOW! 5 to 15 GPM Dual Flow 1” NST or NPSH 110/23 10 to 23 GPM Dual Flow 1” NST or NPSH 110/23 GHT 10 to 23 GPM Dual Flow 3/4” GHT Wt: 1 lb. Length: 4” 1590/20 20 to 90 GPM Dual Flow 1.5” NST or NPSH Wt: 1 lb. Length: 5” Ideal for firefighting and industrial uses Adjustable from fog to straight stream to off with twist shutoff (Dual flow nozzles starting from the off position twist to Low Flow Straight Stream, to Low Flow Partial Fog, to High Flow Straight Stream to High Flow Fog) 105/15BL NEW LOWER FLOW! 5 to 15 GPM Dual Flow 1” NST or NPSH 110/23BL 10 to 23 GPM Dual Flow 1” NST or NPSH 110/23BL GHT 10 to 23 GPM Dual Flow 3/4” GHT Wt: 1 lb. Length: 4” 1560/20 20 to 60 GPM Dual Flow 1.5” NST or NPSH Wt: 1 lb. Length: 5” SB-VIP-10 Economy Special ‘Good price for a good nozzle’ 110/23BL (pictured above) VB1560 ( page 16) 1” NST or NPSH Wt: 2.5 lbs. Length: 7.5” MD-1590/20 1560/20 (pictured above) MADDOG (page 19) 1.5” NST or NPSH Wt: 1.2 lbs. Length: 7.5” MD-1560/20 1590/20 (pictured above) MADDOG (page 19) 1.5” NST or NPSH Wt: 1.2 lbs. Length: 7.5” 888-663-4966 MD-110/23 110/23 (pictured above) MADDOG (page 19) 1” NST or NPSH Wt: 1.2 lbs. Length: 7.5”
SMALL CONSTANT GALLONAGE TIPS Durable and Economical All C&S Nozzle Tips can be combined with a C&S Shutoff valve to make a custom ‘Combo’ nozzle (see pg. 23) Ideal for firefighting and industrial uses Constant Flow Nozzles are constructed of hard anodized aluminum and stainless steel components Available in 15, 30, 60, and 100 GPM. Adjustable from fog to straight stream to off with twist shutoff 115 NEW LOWER FLOW! 15 GPM Constant Flow 1” NST or NPSH 130 30 GPM Constant Flow 1” NST or NPSH 130 GHT 30 GPM Constant Flow 3/4” GHT Wt: 1 lb. Length: 4” 15100 100 GPM Constant Flow 1.5” NST or NPSH Wt: 1 lb. Length: 5” MD-130 130 (pictured above) MADDOG (pictured right) 1” NST or NPSH Wt: 1.2 lbs. Length: 7.5” MD-1560 1560(pictured above) MADDOG (pictured above) 1.5” NST or NPSH Wt: 1.2 lbs. Length: 7.5” MD-BK BLACK KNIGHT(page 13) MADDOG (pictured above) 1.5” NST or NPSH Wt: 1.2 lbs. Length: 8.25” 115BL NEW LOWER FLOW! 15 GPM Constant Flow 1” NST or NPSH 130BL 30 GPM Constant Flow 1” NST or NPSH 130BL GHT 30 GPM Constant Flow 3/4” GHT Wt: 1 lb. Length: 4” 1560 60 GPM Constant Flow 1.5” NST or NPSH Wt: 1 lb. Length: 5” MADDDOG Low/Medium expansion foam tube Fits 105/15, 110/23, 1560/20, 1590/20, 115, 130, 1560, 15100. Can be added to VTE2510 and Black Knight if the bumper is removed. Wt: 1 lb. Length: 4” MD-15100 15100 (pictured above) MADDOG (pictured above) 1.5” NST or NPSH Wt: 1.2 lbs. Length: 7.5” MD-VTE2510 VTE2510 (page 13) MADDOG (pictured above) 1.5” NST or NPSH Wt: 1.2 lbs. Length: 8.25” CSsupplyinc.com
SMOOTH BORES AND STACKED TIPS The new standard in smooth bore nozzles 1” Smooth Bore features: Constructed of anodized aluminum Available in 1” NST and NPSH 1” Straight Bores are best used with the VB1560 Shutoff Wt: 0.8 lbs. Length: 4” 1” ST BR 3/16" 1” ST BR 1/4" 1” ST BR 3/8" 1” ST BR 1/2" 1” ST BR 5/8" 1” ST BR 3/4" 3/16" Outlet 1/4" Outlet 3/8" Outlet 1/2" Outlet 5/8" Outlet 3/4" Outlet 1” ST BR 15/16" 15/16" Outlet 1 1/2” Smooth Bore features: Constructed of anodized aluminum Available in both NST and NPSH 1 1/2” Straight Bores are best used with the VB9520 Shut-Off Wt: 0.8 lbs. Length: 5” Smooth Bore Nozzle ST BR 3/8" Smooth Bore Nozzle ST BR 1/2" Smooth Bore Nozzle ST BR 5/8" Smooth Bore Nozzle ST BR 3/4" Smooth Bore Nozzle ST BR 7/8" Smooth Bore Nozzle ST BR 15/16" Smooth Bore Nozzle ST BR 1" ST BR 1-1/16" ST BR 1-1/8" ST BR 1-1/4" 1.5” Stacked Tip features: Constructed of anodized aluminum 1 1/2” NST and NPSH STT-2 15/16” and 1/2" Outlets Dual Stacked Tip Wt: 1 lb. Length: 8” STT-1 1 1/4", 1 1/8", and 1" Outlets Triple stacked tip Wt: 2 lbs. Length: 12” 3/8" Outlet 1/2" Outlet 5/8" Outlet 3/4" Outlet 7/8" Outlet 15/16" Outlet 1" Outlet Smooth Bore Nozzle Smooth Bore Nozzle Smooth Bore Nozzle Smooth Bore Nozzle Smooth Bore Nozzle Smooth Bore Nozzle Smooth Bore Nozzle 1 1/16" Outlet Smooth Bore Nozzle 1 1/8” Outlet 1 1/4” Outlet Smooth Bore Nozzle Smooth Bore Nozzle PSI 3/16" 1/4" 3/8" 6.5 40 50 60 80 100 WORKS BEST WITH: 7.5 8 9.3 10 11 13 14 16.6 18 27 31 32 37 43 SMOOTH BORE THEORETICAL FLOW DATA/ GPM 1/2" 48 54 57 66 75 5/8" 73 82 89 103 116 3/4" 107 119 129 149 168 VB1560 VB1560 VB1560 VB1560 VB1560 VB1560 (CAFS) 7/8" 15/16" 143 160 176 203 227 166 186 202 233 262 VB1560 (CAFS) VB3012 VB3012 VB3012 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520-2.5 VB9520-2.5 VB9520-2.5 VB9520-2.5 VB9520-2.5 VB9520-2.5 VB9520-2.5 VB9520-2.5 VB9520-2.5 888-663-4966 189 211 230 265 298 237 259 299 335 1" 1 1/16" 1 1/8" 1 1/4" 212 239 267 291 336 377 295 329 359 415 465
PIERCING NOZZLE PN-100 Stainless steel construction Removable penetrating tip for replacement Durable strike plate to drive the nozzle through dense materials Spray pattern from 60º forward to 10º backward for complete coverage Recessed spray holes keeps debris out so the flow is not obstructed 100 gpm @ 100 psi 120 gpm @ 150 psi Swivel : 1.5” NST or NPSH Length: 41” PN-100-HOSE 6’ Hose extension for PN-100 1.75” double jacket with 1.5” couplings Weight: 13 lbs. PN-100-TIP Spray pattern from 60º forward to 10º backward for complete coverage 100 gpm @ 100 psi 120 gpm @ 150 psi PN-100-EXT 3’ stainless steel extension for PN-100 Swivel : 1 1/2” NST Length: 6’ Weight: 3.2 lbs. Length: 10” Weight: 2.4 lbs. Length: 36” Weight: 10.4 lbs. PN-100-COMBO PN100 + PN-100-HOSE + SBV15SS COMBO increases maneuverability of the nozzle at a nice price. Swivel : 1.5” NST Length: 41” Weight: 17 lbs. CSsupplyinc.com
CAFS & SMOOTH BORE NOZZLES Quality COMPRESSED AIR FOAM solutions CAFS-VIP-10 The C&S 1" CAFS Nozzle is a combination of the VB1560 Ball shutoff with full 1" waterway with a choice of a C&S Supply 1” Smooth bore tip (3/16”,1/4”, 3/8”,1/2”, 5/8”, 3/4” or 15/16” outlet) Not using CAFS? This combo makes a great complete smooth bore nozzle. Both parts are constructed of hard coated aluminum. Choice of outlet sizes above, w/ 1” base (comes standard with 15/16” outlet) 1” Fe. Swivel Inlet NST or NPSH Wt: 2.8 lbs Length: 9.25” CAFS-VIP-15 The C&S 1.5" CAFS Nozzle is a combination of the VB9520 Ball shutoff with full 1 3/8" waterway with a choice of a C&S Supply 1 1/2" Smooth bore tip (3/4”, 15/16”, 1”, 1-1/16”, 1-1/8” outlet) Not using CAFS? This combo makes a great complete smooth bore nozzle. Both parts are constructed of hard coated aluminum. Choice of outlet sizes above, w/ 1.5” base (comes standard with 1-1/8” outlet) 1.5” Fe. Swivel Inlet NST or NPSH Wt: 4.4 lbs. Length: 11” STBR-VIP-25 The C&S 2.5" Straight Bore Nozzle is a combination of the VB9520 2.5” Ball shutoff with full 1 3/8" waterway with a choice of a C&S Supply 1 1/2" Smooth bore tip (3/4”, 15/16”, 1”, 1-1/16”, 1-1/8” outlet) This combo makes a great complete smooth bore nozzle. Both parts are constructed of hard coated aluminum. Choice of outlet sizes above, w/ 1.5” base (comes standard with 1” outlet) 1.5” Fe. Swivel Inlet NST or NPSH Wt: 5.6 lbs. Length: 12.75” VBPP-STT1 The C&S Playpipe combo is a combination of the VBPP9520-2.5 Ball shutoff with full 1 3/8" waterway with a Triple Stack smooth bore nozzle with 1 1/4", 1 1/8", and 1" outlets. This combo makes a great complete 2.5” smooth bore nozzle. Both parts are constructed of hard coated aluminum. Outlet sizes: 1 1/4", 1 1/8", and 1" w/ 1.5” NST base 2.5” Fe. Swivel Inlet NST Only Wt: 7.2 lbs. Length: 22” 888-663-4966
COMBO “BREAK-APART” NOZZLES SB-VIP-10 The C&S 1" Economy Special, “BREAK-APART” nozzle is a combination of the VB1560 Ball shutoff with full 1" waterway with a C&S Supply 1” Bumperless Dual Range nozzle which flows 10 and 23 GPM. Both parts are constructed of hard coated aluminum. 110/23BL (page 18) VB1560 ( page 16) 1” NST or NPSH Wt: 2.5 lbs. Length: 7.5” SB-VIP-15 The C&S 1.5" Economy Special, “BREAK-APART” nozzle is a combination of the VB3012 Ball shutoff with full 1" waterway with a choice of a C&S Supply 1 1/2" Small Dual range or Constant Flow Nozzle. The combo comes standard with the 1560/20 (optional tips: 1590/20, 1560, or 15100) Both parts are constructed of hard coated aluminum. 1560/20 (page 18) VB3012 ( page 16) 1.5” NST or NPSH Wt: 3.4 lbs. Length: 7.5” SB-FGP12-1 1” High performance hard foam cartridge proportioner nozzle with pistol grip for 12” or smaller hard cartridge foam sticks. The combo comes standard with the 110/23 (optional tips: 105/15, 115, or 130) COMBO consists of: VB1560 - 1” Shutoff with pistol grip FGP12-1 - 1” Foam Gun Proportioner 110/23 - 1” Nozzle tip 10/23 GPM FCA-02 - 2 X 12” Class “A” Foam Cartridges Wt: 5lbs. Length: 25” COMBO available with the shorter 6” proportioner as well: SB-FGP6-1 SB-FGP12-15 1.5” High performance hard foam cartridge proportioner nozzle with pistol grip for 12” or smaller hard cartridge foam sticks. The combo comes standard with the 1560/20 (optional tips: 1590/20, 1560, or 15100) COMBO consists of: VB3012 - 1.5” Shutoff with pistol grip FGP12-15 - 1.5” Foam Gun Proportioner 1560/20 - 1.5” Nozzle tip 20/60 GPM FCA-02 - 2 X 12” Class “A” Foam Cartridges Wt: 5lbs. Length: 25” CSsupplyinc.com COMBO available with the shorter 6” proportioner as well: SB-FGP6-15
WILDLAND EQUIPMENT TT300 Valve has three positions: Lower Outlet, Upper Outlet, and Off Outlets are 3/4” NH (Garden Hose Threads) Standard tips are 3 GPM Fog and 3/16” straight Bore Tip Other tip options are (Specify configuration): Fog tips: TT300 FOG TIP - 3 GPM (Standard) TT300 FOG TIP - 6 GPM TT300 FOG TIP - 15 GPM 1" Fe. Rigid NST or NPSH Wt: 1.5 lbs. Length: 6" FLT130 Compact Smooth bore nozzle with flat stream pan 30GPM@100 PSI fully open in smooth bore position 20GPM@100PSI in flat stream position 3/4” garden hose insert in a 1” Fe. NPSH Rigid Base Wt: 0.5 lbs. Length: 5" TV1510 The T-Valve is cast aluminum designed to help extend wildland fire fighting hose lays and to supply an additional 1" line for filling pump cans or mop-up use The 1" outlet is controlled by an internal valve with a handle 1.5" Fe. x 1.5" M. x 1" M. Any combination of NST or NPSH (Specify Thread Combination) Wt: 1 lb. Length: 5" T-1 No Valve Includes cap and chain 1" Fe. x 1" M. x 1" M. NST or NPSH Wt: .05 lbs. Length: 4" T-1.5 No Valve Includes cap and chain 1.5" Fe. NST x 1.5" M. NST x 1" M. NPSH or 1.5" Fe. NST x 1.5" M. NST x 1" M. NST Wt: .05 lbs. Length: 5" HC1510 More rigid design with knuckle guard Curved clamping area and clasp design for easy, secure operation The wildland hose clamp is made of cast aluminum Designed for use on single jacket fire hose up to 1.75" It has a built-in spanner for use on fittings 2.5" and smaller Wt: 1.8 lbs. Length: 10.75" 888-663-4966 Straight bore tips: TT300 STRAIGHT TIP - 3/16” (Standard) TT300 STRAIGHT TIP - 1/4” TT300 STRAIGHT TIP - 3/8” CAP & CHAIN Aluminum Cap with Brass Chain Can be added to TV1510 Comes with T-1 and T-1.5 as shown on the left 1" Fe. NST or NPSH Wt: .5 lbs.
MC40 & MC65 Designed to make easy work out of coiling 100’ of single jacket or 50’ of double jacket hose Folds up for small storage and easy transportation Capable of Dutch rolls Mounting bracket (MB) included Trailer Hitch and Wildland Mounting Brackets available for more flexibility in where hose can be coiled, see below MC40 Rolls 1”- 1.5” hose MB mount included Wt: 6.5 lbs. MC65 Rolls 1.5” to 3” hose MB mount included Wt: 7 lbs. MB THMB MB MC40 OR MC65 (WALL MOUNTED FOR USE) HOSE COILERS Saving firefighters backs since 1996 MC80 Designed to make easy work out of coiling 4” to 7” hose Attaches to the Hitch Receiver of a pickup or the Tailboard of a truck using TB80 or to your trailer hitch mount using TH80. Both are included Constructed of heavy gauge steel, for superb durability MC80 Rolls 4” to 7” hose Comes with both a TB80 and a TH80 mount included MC40 OR MC65 (COLLAPSED FLAT FOR STORAGE) Dimensions: 15”x11”x2” Wt: 10 lbs. MC80 TB80 TH80 Additional Square Mount for the MC40 or MC65 Coilers. The Square Mount can be bolted to any Vertical surface Wt: 1 lb. The THMB (Trailer Hitch Mounting Bracket) makes for quick field setup, use, and breakdown of the MC40 or MC65 Hose Coilers. It slides into any class 4 (2") hitch receiver tube Wt: 5 lbs. WLMB The WLMB (Wild Land Mounting Bracket) is great for remote use where finding a place to mount the MC40 or MC65 can be tricky. Simply drive the mount into the ground roll up the hose Wt: 6 lb. TH80 TB80 Extra trailer hitch mount for the MC80 Hose Coiler Wt: 1 lb. Extra mount for the MC80 bolts to the Tailboard so hose can be directly loaded into the hose bed of the engine. The Tailboard Mount can be bolted to any sturdy horizontal surface Wt: 1.5 lbs. CSsupplyinc.com
Genfo Water Backpacks The Cadillac of water backpacks GENFO45 The C&S original Water Back Pack 5 gallon capacity (only 4 minutes to completely discharge) Industrial quick connects for quick fill or stowing the pump wand. Double action chrome plated brass hand pump Effective stream distance of up to 24 feet (max 30 feet) Large 4” polymer cap for easy refill Durable polymer and textile collapsible reservoir Thermo welded seams for strength and durability Reinforced at the top and bottom for extra durability Flexible horizontal baffle inside to reduce shifting water weight Nozzle tip adjusts from straight stream to spray pattern Easy ‘No Tool’ maintenance Wt: 5 lbs. GENFO-PRO The new more comfortable and versatile Water backpack 5 gallon capacity (only 4 minutes to completely discharge) Industrial quick connects for quick fill or stowing the pump wand. Double action chrome plated brass hand pump Effective stream distance of up to 24 feet (max 30 feet) Large 4” polymer cap with Screen for easy refill Durable textile pack with separate replaceable reservoir Thermo welded seams for strength and durability Padded shoulder straps and waist belt Storage pouch for foam concentrate Straps to hold the wand and/or hold a tool Nozzle tip adjusts from straight stream to spray pattern Easy ‘No Tool’ maintenance Wt: 5 lbs. GENFO45 FOAM TUBE Foam attachment option is quick to install or remove and aspirates the foam solution making finished foam Wt: 1 lb. 888-663-4966
Drip Torch The best drip torch on the market Conforms to Forest Service Specifications (USDA FS 5100-614) Meets DOT regulations for transport of flammable fuel UN # 1B1-150 Red body complies with new OSHA regulations 29 CFR 1910.114 Heavy duty, light weight aluminum body Reversible burner for easy storage and transport Check valve to protect against flashback Breather valve Large diameter mouth for ease in filling Double bottom for extra durability DT125 Height: Diameter Weight Capacity: Ship Wt: 14” (closed), 25.5” (assembled) 6” 4.6 lbs. (empty), 16 lbs. (full) 1.25 U.S. Gallons 6 lbs. (Closed for transport) (Assembled for use) REPLACEMENT PARTS: DT125-MB Steel mount to secure the DT-125 for transport Designed so the DT-125 Lifts out Bolt holes in the bottom to attach to the tail board, skid unit or other horizontal sturdy surface Wt: 2.6 lbs. Ht: 8 7/16” DRT03 Tank cover DRT0506 Check valve ball and seat DRT07 Outlet screen DRT08 Discharge plug DT125-QFMB Mount to secure the DT-125 for transport Designed so the DT-125 pulls straight out 3 Bolt/screw holes in the mount to attach in a compartment, on a skid unit or other vertical sturdy surface NOTE: When mounting the unit, a shelf or piece of angle iron needs to support the base of the torch Wt: .8 lbs. CSsupplyinc.com DRT11 Spout and fuel trap DRT14 Nozzle/igniter mount DRT15 Igniter DRT22 Tank collar gasket DRT23 Tank cover lock ring DRT35 Air breather valve DRT83 Chain assembly
Foam Gun Proportioner THE FOAM GUN PROPORTIONER FOAM CARTRIDGES FGP12-1 For 12” or smaller hard cartridge foam sticks 1” Rigid Fe. X 1” M. NST or NPSH Now includes 2 class “A” Foam Cartridges Wt: 2.2 lbs. Length: 15.5” FGP12-15 For 12” or smaller hard cartridge foam sticks 1.5” Rigid Fe. X 1.5” M. NST or NPSH Now includes 2 class “A” Foam Cartridges Wt: 2.2 lbs. Length: 15.5” FGP6-1 For 6” or smaller hard cartridge foam sticks 1” Rigid Fe. X 1” M. NST or NPSH Now includes 2 class “A” Foam Cartridges Wt: 1.6 lbs. Length: 15.5” FGP6-15 For 6” or smaller hard cartridge foam sticks 1.5” Rigid Fe. X 1.5” M. NST or NPSH Now includes 2 class “A” Foam Cartridges Wt: 1.6 lbs. Length: 15.5” FCA-24 Price per box if 1-9 boxes are purchased (See Price List) 1 BOX of 24 - 12” Class A foam cartridges Wt: 14.4 lbs. Length: 12” FCA-240 Price per box if 10+ boxes are purchased (See Price List) 1 BOX of 24 - 12” Class A foam cartridges Wt: 14.4 lbs. Length: 12” 888-663-4966
High Viz™ Can you see me now? All Forestry Products meet or exceed USDA FS 5100 Series Specification WV1010-HIGH-VIZ 1" Fe. Swivel x (2) 1" M. outlets Powder coated High Visibility Yellow with Red ORALITE® Reflective Tape Front and rear seats for less friction loss Any combination of NST and NPSH Wt: 3 lbs. WV1510-HIGH-VIZ 1.5" Fe. Swivel x (2) 1" M. outlets Powder coated High Visibility Yellow with Red ORALITE® Reflective Tape Front and rear seats for less friction loss Any combination of NST and NPSH Wt: 4 lbs. WV15-HIGH-VIZ 1.5" Fe. Swivel x (2) 1.5" M. outlets Powder coated High Visibility Yellow with Red ORALITE® Reflective Tape Front and rear seats for less friction loss Any combination of NST and NPSH Wt: 4 lbs. TV1510-HIGH-VIZ The T-Valve is cast aluminum designed to help extend wildland fire fighting hose lays and to supply an additional 1" line for filling pump cans or mop-up Powder coated High Visibility Yellow with Red ORALITE® Reflective Tape The 1" outlet is controlled by an internal valve with a handle 1.5" Fe. x 1.5" M. x 1" M. Any combination of NST or NPSH (Specify Thread Combination) Wt: 1 lb. Length: 5" HC1510-HIGH-VIZ Powder coated High Visibility Yellow with Red ORALITE® Reflective Tape More rigid design with knuckle guard Curved clamping area and clasp design for easy, secure operation The wildland hose clamp is made of cast aluminum Designed for use on single jacket fire hose up to 1.75" It has a built-in spanner for use on fittings 2.5" and smaller Wt: 1.8 lbs. Length: 10.75" CSsupplyinc.com
WYE VALVES Smooth waterway for less friction loss All Forestry Products meet or exceed USDA FS 5100 Series Specification WV1010 1" Fe. Swivel x (2) 1" M. outlets Front and rear seats for less friction loss Any combination of NST and NPSH Wt: 3 lbs. WV1510 1.5" Fe. Swivel x (2) 1" M. outlets Front and rear seats for less friction loss Any combination of NST and NPSH NOTE: Can also be ordered as 1.5” Fe. X 1.5” M. X 1” M. Wt: 4 lbs. WV15 1.5" Fe. Swivel x (2) 1.5" M. outlets Front and rear seats for less friction loss Any combination of NST and NPSH Wt: 4 lbs. WV2510 2.5" Fe. Swivel x (2) 1" M. outlets Front and rear seats for less friction loss 2.5” NST ONLY 1” outlets NST or NPSH Powder-coated red NOTE: Can also be ordered as 2.5” Fe. x 1.5” M. x 1” M. Wt: 5 lbs. WV2515 2.5" Fe. Swivel x (2) 1.5" M. outlets Front and rear seats for less friction loss 2.5” NST ONLY 1.5” outlets NST or NPSH Powder-coated red Wt: 5 lbs. BEHIND THE SCENES “PROUDLY MADE IN THE U.S.A.” SCENE - FORGED IN FIRE... Ask us about special size and thread combinations 888-663-4966
WYE VALVES Smooth waterway for less friction loss WV2515-B (Brass) 2.5" Fe. Swivel x (2) 1.5" M. outlets NST only Powder-coated red CALL FOR AVAILABILITY Wt: 7 lbs. WV2525 2.5" Fe. Swivel x (2) 2.5" M. outlets NST only Powder-coated silver Wt: 9 lbs. W15 (Plain Wye) 1.5" Fe. Swivel X (2) 1.5" M. Outlets Aluminum Plain Wye (no valves) Wt: 3 lbs. W2515 (Plain Wye) 2.5" Fe. Swivel X (2) 1.5" M. Outlets Aluminum Plain Wye (no valves) Wt: 3 lbs. CSsupplyinc.com
HYDRANT ACCESORIES The standard in valves and innovative wrench design HYDRANT GATE VALVE HGV25 Designed with stainless steel non-rising internal stems The aluminum body, internal gate and the inlet/outlet fittings are hard anodized for maximum protection against corrosion The units take approximately 10 turns to open and close 2.5" Fe. Swivel and 2.5" M. outlet NST Wt: 4 lbs. Ht: 11 1/2" BRASS HYDRANT GATE VALVE HGV25-B They are designed with brass non-rising internal stems The units take 10 turns to open and close 2.5" Fe. Swivel and 2.5" M. outlet NST Wt: 9 lbs. Ht: 11 1/2" HYDRANT WRENCH HW733 Fits hydrant stems BOTH 1" (square and pentagon) and 1.5" (pentagon) Will work on worn stems No more adjusting, just put the open end over the Hydrant stem and pull the handle, the harder you pull, the tighter the grip To release, just relax and lift it off the stem Will actually stay on the stem and not in the mud while you work The spanner end of the wrench is designed for use on 2 1/2" and larger fittings Wt: 5 lbs. Length: 18” 888-663-4966
HOSE HANDLER Finally a High-Rise Pack that Works! CSsupplyinc.com
BRASS BALL VALVES/STRAINERS Prevent rocks, sticks and other gunk from getting into suction hose line BRASS FULL PORT VALVES Heavy duty brass full port valves. Use to control or shutoff water, gas, oil or steam. Great for use on skid units and brush trucks. 600 W.O.G. Teflon Seals Full Port Chrome Plated Ball Adjusts Flow or Positive shutoff BFPV38 3/8” x 3/8” BFPV50 1/2” x 1/2” BFPV75 3/4” x 3/4” BFPV100 1” x 1” BFPV400 4” x 4” BRASS FOOT VALVE Valve body is cast Brass Corrosion resistant, stainless steel screen, spring and lock nut FV-B 1/2" FV-B 3/4" FV-B 1" FV-B 1 1/4" FV-B 1 1/2" FV-B 2" FV-B 3" FV-B 4" 1/2" 3/4" 1" Fe. NPT Fe. NPT Fe. NPT 1 1/4" Fe. NPT 1 1/2" Fe. NPT 2" 3" 4" Fe. NPT Fe. NPT Fe. NPT Stainless Steel Foot Valve Strainers All stainless steel construction Extremely durable & corrosion resistant FV-SS 1” 1" FV-SS 1 1/4” 1 1/4" FV-SS 1 1/2” 1 1/2" Fe. NPT Fe. NPT Fe. NPT Plastic Foot Valve Strainers Non-corrosive Brady plastic construction Nose cone design reduces water turbulence FV-P 3/4" FV-P 1" 3/4" 1" FV-P 1 1/4" 1 1/4" FV-P 1 1/2" 1 1/2" Fe. NPT Fe. NPT Fe. NPT Fe. NPT 888-663-4966 Wt: 0.3lbs. Wt: 0.5 lbs. Wt: 0.7 lbs. Wt: 1.1 lbs. Wt: 17.5 lbs. BFPV125 1 1/4” x 1 1/4” BFPV150 1 1/2” x 1 1/2” BFPV200 2” x 2” BFPV300 3” x 3” Wt: 1.6 lbs Wt: 2.4 lbs. Wt: 3.5 lbs. Wt: 10.4 lbs.
ADAPTERS & REDUCERS AD75GHT1NH 3/4” Fe. GHT X 1” M. NST AD75GHT1NP 3/4” Fe. GHT X 1” M. GHT AD1NH75GHT 1” Fe. NST x 3/4” M. GHT AD1NP75GHT 1” Fe. NPSH x 3/4” M. GHT AD1NH1NP AD1NH1.5NH 1” Fe. NST x 1” M. NPSH AD1NP1NH 1” Fe. NPSH x 1” M. NST 1” Fe. NST x 1.5” M. NST AD1NP1.5NH 1” Fe. NPSH x 1.5” M. NST AD1.5NH1NH AD1.5NH75GHT 1.5” Fe. NST x 1” M. NST AD1.5NH1NP 1.5” Fe. NST x 1” M. NPSH 1.5” Fe. NST x 3/4” M. GHT AD1.5NP75GHT 1.5” Fe. NPSH x 3/4” GHT AD2.5NH1.5NH 2.5” Fe. NST x 1.5” M. NST ADBIM15M ADMM1.5NH1.5NH BS-336 65MM - BI M. x 1.5” M. NST ADBIM25M BS-336 65MM - BI M. x 2.5” M. NST ADS1.5M1.5NH 1.5” STORZ x 1 1/2” RIGID M. NST ADS5M2.5NH 5” STORZ x 2.5” RIGID M. NST ADFF1.5NH1.5NH 1.5” Fe. NST X 1.5” Fe. NST ADFF2.5NH2.5NH 2.5” Fe. NST x 2.5” Fe. NST 1.5” M. NST x 1.5” M. NST ADMM2.5NH2.5NH 2.5” M. NST x 2.5” M. NST Don’t see the adapter you are looking for? Call us for availability & pricing!! CSsupplyinc.com
VIPER REPAIR Repair service and Repair kits C&S Repair Service: C&S Supply services all of the products we sell. Our hourly labor charge is nominal and it includes disassembling and diagnosing the problem, cleaning the nozzle, repairs as necessary, and reassembly. Every Nozzle is flow tested at the appropriate pressure, then each nozzle/valve pressure tested at 200-250 psi before it is returned. C&S Supply is the only authorized U.S. repair location of Viper nozzles. C&S Supply only warranties repairs made by C&S Supply. Viper Nozzle Repair Kits: Kits include all internal seals, shutoff ball, rubber bumper, pistol grip, shutoff handle, shutoff handle hardware, locater pin, swivel bearings, set pins, spinning teeth, and o-rings needed to repair a Viper nozzle. VNRK-1560 Repair Kit for model SG1560 VNRK-3012 Repair Kit for models SG3012 & SG7515 VNRK-9520 Repair Kit for models SG9520 & SG12250 VNRK-BDS752 Repair Kit for model BDS752 VNRK-BD3012 Repair Kit for models BD3012 & BD7515 VNRK-1550 Repair Kit for models CG1550 & FT1550 VNRK-2510 Repair Kit for models CG2510, CG5016, FT2510 & FT5016 VNRK-8020 Repair Kit for models CG8020, FT8020, & FT12250 VNRK-IND Repair Kit for models ST2510-PV & ST5016-PV VNRK-IND2.5 Repair Kit for models ST2510-PV & ST5016-PV Viper Valve Repair Kits: Kits include: shutoff ball, seal, shutoff handle, shutoff handle hardware, swivel ball bearings, o-rings, and set pins. VVRK-3012 Repair Kit for Small VIPER shutoff Valves. Models ending in 1550, 1560, 2510, 3012, 5016, 7515 & 752 VVRK-9520 Repair Kit for Large VIPER shutoff Valves. Models ending in 8020,9520, & 12250 888-663-4966
VIPER REPAIR Common Valve Parts Viper Handle Hardware: Kits include: ball locator, ball actuator, pan head cover and two O-rings. V-HH5-3012 Handle Hardware for Small VIPER shutoff Valves. Models ending in 1550, 1560, 2510, 3012, 5016, 7515 & 752 V-HH5-9520 Handle Hardware for Large VIPER shutoff Valves. Models ending in 8020, 9520 & 12250 Ball and Seat Combos: VBSC-3012 Ball & Seat for Small VIPER shutoff Valves. Models ending in 1550, 1560, 2510, 3012, 5016, 7515 & 752 VBSC-9520 Ball & Seat for Large VIPER shutoff Valves. Models ending in 8020, 9520 & 12250 Viper Pistol Grip: V-PG15V Replacement Pistol Grip for ALL VIPER shutoffs Viper Handles: V-HANDLE-3012 Replacement handle and attaching hardware for Small VIPER shutoff. Models ending in 1550, 1560, 2510, 3012, 5016, 7515 & 752 NOTE: The above handle is now a kit. It was developed due to a handle design improvement in 2016 Available in an assortment of colors: Red, Orange, Yellow, Green, Blue, and Black V-HANDLE-9520 Replacement handle only for Large VIPER shutoff. Models ending in 8020, 9520 & 12250 Available in an assortment of colors: Red, Orange, Yellow, Green, Blue, and Black V-HANDLE-M-3012 Replacement handle only for Small VIPER shutoff. Models ending in 1550, 1560, 2510, 3012, 5016, 7515 & 752 Compact And durable replacement option to the traditional composite V-HANDLE-M-9520 Replacement handle only for Large VIPER shutoff. Models ending in 8020, 9520 & 12250 Compact And durable replacement option to the traditional composite CSsupplyinc.com
FLOW DATA Select Gallonage MODEL SG1560 NOZZLE PRESSURE (psi) 75 100 125 SG3012 75 100 125 SG7515 75 100 125 SG9520 75 100 125 SG12250 75 100 125 NOZZLE FLOW (GPM) 13 26 43 52 15 30 50 60 17 34 56 67 26 52 82 108 30 60 95 125 34 67 106 140 65 87 108 130 75 100 125 150 84 112 140 168 82 108 130 173 95 125 150 200 106 140 168 224 94 113 150 188 125 150 200 250 140 168 224 280 888-663-4966 STREAM SETTING EFFECTIVE REACH SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS 59 82 92 102 62 85 98 108 69 98 105 108 75 105 125 131 85 112 131 141 92 118 138 148 112 121 135 138 118 138 114 148 125 141 151 157 121 131 141 144 128 141 148 154 128 141 144 161 125 135 144 148 131 144 151 157 135 144 154 164
FLOW DATA Constant Gallonage, Automatic Gallonage STYLE CONSTANT GALLONAGE FLOW DATA STREAM SETTING SS NOZZLE PRESSURE (psi) 75 CG1550-30 CG2510-95 CG5016-125 CG8020-200 100 150 75 100 150 75 100 150 75 100 150 NOZZLE FLOW (GPM) 26 30 37 82 95 116 108 125 153 182 210 257 SS SS SS SS SS SS SS SS SS SS SS EFFECTIVE REACH 72 85 98 125 135 144 131 144 154 144 157 164 AUTOMATIC FLOW DATA STYLE FT1550 FT2510 FT5016 FT8020 FT12250 NOZZLE PRESSURE (psi) 75 100 150 75 100 150 75 100 150 75 100 150 50 100 150 NOZZLE FLOW (GPM) 15 23 50 25 38 100 50 70 160 80 145 200 125 200 250 CSsupplyinc.com STREAM SETTING SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS EFFECTIVE REACH 69 82 112 121 131 141 128 138 151 131 144 161 151 145 165
FLOW DATA Low Pressure, Foam Equipment LOW PRESSURE NOZZLES FLOW DATA STYLE SG7515-LP NOZZLE PRESSURE (psi) 75 NOZZLE FLOW (gpm) 75 100 125 150 87 100 115 144 173 95 SG9520-LP 75 100 FT5016-LP FT8020-LP CG-5016-LP CG8020-LP 75 100 75 100 75 100 75 100 125 150 200 110 144 173 231 70 110 200 265 125 144 210 242 STREAM SETTING SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS FOAM NOZZLES FLOW DATA STYLE PVB1560 PVB3012 PVB7515 NOZZLE PRESSURE (psi) 75 100 75 100 75 100 NOZZLE FLOW (gpm) 30 35 60 69 95 110 EXPANSION RATE 10:1 10:1 12:1 12:1 9:1 9:1 EFFECTIVE REACH 30 36 39 46 46 56 STYLE FOAM PROPORTIONER FLOW DATA PRESSURE LOSS BYPP1560 BYPP3012 BYPP7515 BYPP9520 PRESSURE (psi) FLOW (gpm) 100 150 100 150 100 150 100 150 18 23 46 56 92 113 110 130 888-663-4966 FOAM 39% 39% 33% 33% 30% 30% 30% 30% BY-PASS 7% 7% 14% 14% 15% 15% 15% 15% EFFECTIVE REACH 115 125 131 138 121 141 148 151 125 135 141 148 131 141 151 157 131 141 138 161 135 148 151 157
888-663-4966
CSsupplyinc.com
SMALL VIPER VALVES Part numbers ending in: 10SS, 15SS, 1530, 1550, 1560, 2510, 3012, 3015, 5016, 550, 540, 7515 VB1560 and VB3012 BOM REFERENCE 1 1a 2 2a 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 KIT# VVRK-3012 VBSC-3012 V-HH5-3012 V-SWKIT1560 V-SWKIT3012 SEAT RETAINER (3 PIECES) BALL ACUATOR (2 PEICES) PAN HEAD COVER SWIVEL SET PIN BALL BEARINGS HANDLE (BAIL) V-SEATRTNR-3012 V-BALLACT-3012 V-PANHEAD-3012 V-SETPIN-3012 V-BEARINGS-3012 V-HANDLE-3012 VB1560 and VB3012 AVAILABLE KITS KIT Name Valve Repair Kit Small Ball & Seat Combo Small Handle Hardware Small Swivel Kit 1" Small Swivel Kit 1.5" Small PARTS CONTAINED 1,1a,3,4,6,7,10,11,12,13,14,15,16,17,18 4,10,11,12 6,7,13,14,15 1,3,16,17 1a,3,16,17 1 1 1 1 32 1 PART NAME 1" GASKET 1.5" GASKET 1" SWIVEL 1.5" SWIVEL SWIVEL O-RING BALL PISTOL GRIP BALL LOCATOR (2 PIECES) PISTOL GRIP SET PIN VALVE BODY PART # GASKET_1 GASKET_15 V-1" SWIVEL V-1.5" SWIVEL V-ORING-SW-3012 V-BALL-3012 V-PG15V V-BALLLOC-3012 V-SETPIN-3012 VLVBDY-3012 QUANTITY 1 1 1 1 1 1 1 1 1 1 - Pull the bail handle toward the swivel to OPEN the valve. - Push the bail handle toward the tip of the nozzle to CLOSE the valve. - Maximum Operating Pressure for VIPER Valves is 580 PSI Maintenance: - Test nozzle before putting into service. - Clean nozzle by flushing with water after use. - Use non-detergent soap to clean dirt from the exterior to reduce wear . - Regularly check the bail handle screws that they are tight. If taken out use medium strength thread locker on the threads before reassembly. - Periodically service your nozzle or have your fire equipment dealer service it. - Normally serviced parts are the: Ball, Seat assembly, and the handle hardware (Ball locator screw, Actuator, Pan head cover). PLEASE BE RESPONSIBLE! PLEASE BE CAREFUL! THE USER OF THIS EQUIPMENT IS PERSONALLY RESPONSIBLE FOR THE FOLLOWING: 1. You need to know and understand that Firefighting and Emergency response is dangerous and proper training is needed. 2. You need to be physically fit and skillful in the use of any equipment that you may need to use. 3. You need to know that your equipment is in proper working order. 4. You need to know carelessness or negligence may result in injury or death. PLEASE BE RESPONSIBLE! PLEASE BE CAREFUL! CSsupplyinc.com SHUTOFF USE: - Open and close the valve slowly to reduce risk of water hammer.
LARGE VIPER VALVES Part numbers ending in: 8020, 9520, 12250 VB9520 and VB9520-2.5 BOM REFERENCE 1 1a 2 2a 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 KIT# VVRK-9520 (*) VBSC-9520 V-HH5-9520 V-SWKIT9520 V-SWKIT9520-2.5 SEAT RETAINER (3 PIECES) BALL ACUATOR (2 PEICES) SWIVEL SET PIN BALL BEARINGS HANDLE (BAIL) V-SEATRTNR-9520 V-BALLACT-9520 PAN HEAD COVER V-PANHEAD-9520 V-SETPIN-9520 V-BEARINGS-9520 V-HANDLE-9520 VB9520 and VB9520-2.5 AVAILABLE KITS KIT Name Valve Repair Kit Lg. Ball & Seat Combo Lg. Handle Hardware Lg. Swivel Kit 1" Lg. Swivel Kit 1.5" Lg. 1 1 1 1 32 1 PARTS CONTAINED 1,1a,3,4,6,7,10,11,12,13,14,15,16,17,18 4,10,11,12 6,7,13,14,15 1,3,16,17 1a,3,16,17 PART NAME 1.5" GASKET 2.5" GASKET 2.5" SWIVEL SWIVEL O-RING BALL PISTOL GRIP BALL LOCATOR (2 PIECES) PISTOL GRIP SET PIN VALVE BODY PART # GASKET_15 GASKET_25 1.5" SWIVEL (LARGE) V-1.5" SWIVEL-9520 V-2.5" SWIVEL-9520 V-ORING-SW-9520 V-BALL-9520 V-PG15V V-BALLLOC-9520 V-SETPIN-PG VLVBDY-9520 QUANTITY 1 1 1 1 1 1 1 1 1 1 SHUTOFF USE: - Open and close the valve slowly to reduce risk of water hammer. - Pull the bail handle toward the swivel to OPEN the valve. - Push the bail handle toward the tip of the nozzle to CLOSE the valve. - Maximum Operating Pressure for VIPER Valves is 580 PSI Maintenance: - Test nozzle before putting into service. - Clean nozzle by flushing with water after use. - Use non-detergent soap to clean dirt from the exterior to reduce wear . - Regularly check the bail handle screws that they are tight. If taken out use medium strength thread locker on the threads before reassembly. - Periodically service your nozzle or have your fire equipment dealer service it. - Normally serviced parts are the: Ball, Seat assembly, and the handle hardware (Ball locator screw, Actuator, Pan head cover). PLEASE BE RESPONSIBLE! PLEASE BE CAREFUL! THE USER OF THIS EQUIPMENT IS PERSONALLY RESPONSIBLE FOR THE FOLLOWING: 1. You need to know and understand that Firefighting and Emergency response is dangerous and proper training is needed. 2. You need to be physically fit and skillful in the use of any equipment that you may need to use. 3. You need to know that your equipment is in proper working order. 4. You need to know carelessness or negligence may result in injury or death. PLEASE BE RESPONSIBLE! PLEASE BE CAREFUL! 888-663-4966
Nozzle Selling Basic Line of Questioning (page 1 of 2) PRICE LIST (P.L.) WILL LIST ALL PRODUCTS AND CATALOG (CAT.) PAGES THE P.L. CAN BE A GREAT REFERENCE TOOL … What size inlet (hose coupler) are you looking for? ¾”, 1”, 1-1/2” (1-3/4”), or 2-1/2”? Note: 1-1/2” and 1-3/4” couplers are the same. What threads do you use? National Standard Hose (NST, NH) or National pipe straight hose (NPSH, IPT, NPT) What type of nozzle would you like? Select Gallonage , Constant Gallonage, Automatic, Foam, Smoothbore, or Small “BREAK- APART” If: Select Gallonage, What Flow rate and at what PSI Constant Gallonage, What Flow rate and at what PSI (CAT. PAGES 4-7) (CAT. PAGES 8-9) Automatic, What Flow rate or range and at what PSI (CAT. PAGES 10-11) Foam, What Flow rate (P.L. Page 3) (CAT. PAGES 14-15) (P.L. Page 4) Smoothbore Nozzle Tip, what orifice size or flow rate? Please note which valve, VB model, should go with each smoothbore tip) (CAT. PAGES 20 & 22) (P.L. Page 6) PSI 3/16" 1/4" 3/8" 6.5 7.5 8 40 50 60 80 100 Suggested VB MODEL 11 13 14 9.3 10 16.6 18 27 31 32 37 43 SMOOTH BORE THEORETICAL FLOW DATA/ GPM 1/2" 48 54 57 66 75 5/8" 73 82 89 103 116 3/4" 107 119 129 149 168 VB1560 VB1560 VB1560 VB1560 VB1560 VB1560 (CAFS) 7/8" 15/16" 143 160 176 203 227 166 186 202 233 262 VB1560 (CAFS) VB3012 VB3012 VB3012 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520 VB9520-2.5 VB9520-2.5 VB9520-2.5 VB9520-2.5 VB9520-2.5 VB9520-2.5 VB9520-2.5 VB9520-2.5 VB9520-2.5 189 211 230 265 298 237 259 299 335 1" 1 1/16" 1 1/8" 1 1/4" 212 239 267 291 336 377 295 329 359 415 465 (P.L. Page 1,2) (P.L. Page 3) OR Small “BREAK-APART”, continue to instructions on next page MOST OF THESE PRODUCTS ARE ON PAGES 5 OF THE PRICE LIST SMOOTH BORES ARE ON PAGE 6 CSsupplyinc.com
Nozzle Selling Basic Line of Questioning (page 2 of 2) Does customer want a Ball shutoff or build a ‘Break-Apart’ nozzle Step 1 BALL SHUTOFF What size inlet are they looking for? 1” (w/ 1” waterway) SBV10SS VB1560 1.5” (w/ 1” waterway) SBV15SS VB3012 What threads do you use? National Standard Hose (NST, NH) or National pipe straight hose (NPSH, IPT, NPT) Step 2 NOZZLE TIP For break apart or inexpensive nozzles, a nozzle tip can be added to a ball shutoff. What Type of nozzle is preferred? Dual Range Nozzle Constant flow Nozzle Smoothbore Nozzle (CAT. PAGE 18) (CAT. PAGE 19) (CAT. PAGE 20) What GPM do they want? (For smoothbore sizes see the chart on page 44) MOST OF THESE PRODUCTS ARE ON PAGE 5 OF THE PRICE LIST. HOSE COILERS: What size hose are they going to roll? MC40 rolls 1” & 1.5” hose MC65 rolls 1.5” to 3” hose (this roller can also roll 1” hose with some guidance from the operator) *** One mounting bracket (MB) is included with the MC40 and MC65 THMB trailer hitch mounting bracket is the most popular accessory for these mounts MC80 rolls 4” -7” hose ***One each Tailboard Mount and Trailer Hitch Mount are included with each unit. Extra mounting brackets can be ordered separately (CAT. PAGE 25) TEL: 888-663-4966 sales@cssupplyinc.com FAX: 970-663-3878 888-663-4966 (P.L. Page 7) (P.L. Page 5) (P.L. Page 5) (P.L. Page 6) (CAT. PAGES 16-17) 1.5” (1.75”) (w/ 1 3/8” waterway) VB9520NPG VB9520 (P.L. Page 5) 2.5” with 1.5” outlet (w/ 1 3/8” waterway) VB9520NPG-2.5 VB9520-2.5
ORDERING INFORMATION ORDERS: TERMS: DELIVERY: Orders will be accepted by fax at 970-663-3878 or sales@cssupplyinc.com Net 30 Days, 1% discount for payment within 15 days of invoice date. Late Payments may result in product hold pre-pay status. Credit card payments are not eligible for the 1% discount within 15 days. F.O.B. Fort Collins, Colorado. All Shipments will be by UPS Ground. Please advise if express shipment or special carrier is required. SHIPMENTS: In-Stock items are shipped within 24-48 hours after receipt of order. We will contact you with expected delivery for any non-stock items. Shipping Discrepancies must be reported within 10 days of delivery to assure accurate adjustment. RETURN POLICY: Items may be returned for Credit or Exchange only. Call 888-663-4966 for instructions and Returned Goods Authorization number (RGA). Goods returned in new condition will be restocked and can be subject to a 15% restocking charge. All returns must be properly packaged to avoid any damage to item(s). If items are damaged upon receipt, an appropriate amount will be deducted from your credit. Items must be in like new condition to receive full credit. Any item permanently marked with your identification is NOT returnable. REPAIR POLICY: Call 888-663-4966 for instructions and Returned Goods Authorization number (RGA). Enclose a note explaining the problem and any other pertinent information. All effort will be made to repair the item or an equivalent replacement will be made. Defective items will be fixed according to the warranty policy. Charges for repair and parts will be issued accordingly. THREADS: CARRIER: NST or NPSH threads are available on most items. Special threads may be available for a minimum quantity of ten (10) of each type. If you designate a carrier other than UPS, you will be responsible for paying for all the items shipped even if your carrier loses some of it. Be sure to insure all items through your carrier. Carrier designation can only be done on freight collect shipments. WE ACCEPT – Visa, MasterCard and American Express LIMITED WARRANTY FOR C&S PRODUCTS C&S Supply, Inc. and its manufacturers warrant their products to the original purchaser or any person to whom the product is transferred, that our product is free of defects in material and workmanship for five (5) years commencing from the date of purchase. This warranty is limited to repairing or replacing the defective product. In the event that the defect is found to be attributable to C&S, the product will either be repaired or replaced, at the discretion of the company, at no cost to the customer. To qualify for this warranty, the product must be returned to the Company, shipping prepaid, proof of purchase may be required, and within a reasonable time after discovery of the defect. The company disclaims any implied warranties of merchantability or of fitness for any particular purpose. No warranties will apply if the product is in any way altered or modified after delivery by the company.
1 Publizr