261 VALVE HARDWARE L-RINGS FOR EARTHMOVERS • Creates an air seal where the tire bead and rim seat are not completely compatible • Not a cure for damaged beads nor damaged wheels and rims! • CAUTION: Should be used during fitments, do not install where a broken bead is suspected ASCOT NO. 471-80112 471-80115 471-80116 471-80120 471-80125 471-80129 471-80133 471-80135 471-80139 471-80145 471-80149 471-80151 471-80157 471-80163 471-80169 MFG. NO. LR-12 LR-15 LR-16 LR-20 LR-25 LR-29 LR-33 LR-35 LR-39 LR-45 LR-49 LR-51 LR-57 LR-63 LR-69 SIZE 12" 15" 16" 20" 25" 29" 33" 35" 39" 45" 49" 51" 57" 63" 69" LARGE BORE SCREW-ON REPAIR VALVE ADAPTERS FOR INNER TUBES 465-40000 ASCOT NO. 465-40000 465-40011 MFG. NO. H-4000 DESCRIPTION Adapter Converts Tubes having SP-1000 Type Spud To Accept Large Bore Swivel Valves. Equipped With BW-18 Washer and Used With Rim Slots H-4000-1 Same As H-4000 Except Without Bridge Washer and Hex Nut CLAMP-IN RIM SPUD • Fits 13/16" diameter valve hole • Can attach to any super large bore valve to the rim through a standard valve hole (13/16" diameter) 464-00208 ASCOT NO. 464-00208 464-00082 MFG. NO. TR NUMBER T-81 T-82 TR-SP8 — DESCRIPTION Clamp-In Rim Spud T-82 Clamp-In Rim Spud - 1/4" longer effective length SCREW-IN RIM SPUDS • Used to attach any of the super large bore valves to the rim and is designed to screw into a 1/2" NPT tapped rim hole • Can be changed without dismounting the tire LARGE BORE SCREW-ON REPAIR VALVES FOR INNER TUBES • Supplied in straight or bent form ready for installation on tubes • Equipped with A-146 valve coer and A-149 hex cap • Used with SP-1000 tube spud 464-00209 465-10781 ASCOT NO. 464-00209 MFG. NO. C-100 DESCRIPTION Effective Length 1/4" Longer SCREW-IN RIM SPUDS • 85° bend angle ASCOT NO. MFG. NO. TR NUMBER 465-01014 465-10760 465-10761 465-10762 465-10763 465-10764 465-11750 465-11751 465-11752 465-10780 465-10781 465-10782 465-11790 465-11791 465-11792 LB-216 LB-217 LB-218 LB-219 LB-220 LB-221 LB-223 LB-224 LB-225 LB-226 LB-227 LB-228 LB-229 LB-230 LB-231 J-1014 J-1076A J-1076B J-1076C J-1076D J-1076E J-1175A J-1175B J-1175C J-1078A J-1078B J-1078C J-1179A J-1179B J-1179C A-ANGLE BEND Straight Straight 86° 90° 90° 88° Straight 82° 88° Straight 82° 90° Straight 88° 86° B-VERTICAL HEIGHT 1-29/32" 4-5/32" 1-1/8" 1-1/2" 2-1/16" 1-3/8" 5-9/32" 1-1/4" 1-3/8" 5-25/32" 1-3/8" 1-1/8" 6-13/32" 1-3/8" 1-1/8" C-HORIZONTAL LENGTH - - 3-1/4" 2-7/8" 2-5/16" 3" - 4-1/4" 4-1/8" - 4-5/8" 4-7/8" - 5-1/4" 5-1/2" ASCOT NO. 466-00918 MFG. NO. R-520 TR NO. TR-CH-8 DESCRIPTION Core Housing 466-00918 CORE HOUSING • Complete with core and cap • Designated at Tire and Rim as the CH-8 • Integral part of the system as the CH-8 is removed from the valve assembly with the IN-80A adapter to utilize the larger opening and the fullest flow of the 6185 check valve ASCOT NO. 466-00850 466-00851 MFG. NO. S-85 S-85-D DESCRIPTION 466-00850 Fits 1/2" NPT Tapped Rim Hole Furnished With A Locking Nut With A Teflon Seal So Direction Can Be Reversed 466-00851 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE
47 Publizr Home