287 Tire Changers & Accessories Wheel Balancers & Accessories Lifts Rubber Blocks Lift Pads Rolling Jacks Work Stations WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
288 SERVICE EQUIPMENT Ascot Supply Tire Changer MANUAL TIRE CHANGER • Small tire changing system for lawn & garden, ATV and other small tires/wheels • Not for passenger tires • Adjustable to accomodate multiple tire/wheel sizes • High quality, energy saving & environmentally friendly • Portable and equipped with professional accessories • Can be operated easily without the use of power or pneumatic supplies • Works for an impressive range of tires • Great for family and commercial garages, racing teams, emergencies and any time a convenient changer is required OPTIONAL BASE PLATE FOR MANUAL TIRE CHANGER • Optional base plate is sold seperately • Base plate eliminates anchoring to the floor and provides a non-slip surface for the technician • Base plate dimensions: 24” x 30” • 12 gauge steel (2.5 mm) NONSLIP ADJUSTABLE NO NEED FOR POWER OR PNEUMATICS ASCOT NO. MFG. NO. 441-00202 441-00002 DESCRIPTION BJ-CO2 BJ-CO2-BASEPLATE Ascot Supply Manual Tire Changer Optional Base Plate for Manual Tire Changer BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT
SERVICE EQUIPMENT 289 CEMB Tire Changers SM628BPS ADVANCED SWING ARM TIRE CHANGER WITH BEAD PRESS SYSTEM • Quick-change steel mount head with plastic protectors and polymer mounting head • Selfcentering, dual clamping cylinder heavy duty turntable • Clamp up to 32" diameter rims and tires up to 44" diameter • Heavy-duty 220V, 1Ph phase inverter, constant torque two-speed (8-15rpm) 220V 3Ph motor • High-Performance BPS (Bead Press System) for simple servicing of stiff side wall tires • Press cone kit allows simple push down external rim clamping • Lower bead roller demounts tires without using the mounting head • Adjustable two-way high-power bead breaker side-shovel with protector sleeve • Two stage tire inflation • Jaw-placed jets and tire inflator includes accumulator safety limiter SM645HPA PERFORMANCE TILT BACK TIRE CHANGER WITH HPA BEAD PRESS • Automatic tilt-back mount-demount arm re-positions for next wheel without adjustments • Heavy-duty 110V motor with high torque, handles the difficult sidewall tires and deep drop center rims • Bead breaker shovel: Adjustable to the correct angle to fit diameter and width of tire • Two-stage tire bead sealing inflation jets • Tire inflator includes safety limiter • HPA two-sided press arm system is a must have for simple servicing of stiff sidewall tires and deep drop center rims • Includes press arm, press follower and two tire lifter discs • Optional polymer mount head kit SM825 SWING ARM PASSENGER & LIGHT TRUCK TIRE CHANGER • Air tank in tower • Dual clamping cylinders • Semi-automatic swing arm • Inflator jets on each clamp • Inserts protect aluminum wheels • Adjustable bead breaker SWING AIR TANK 443-91825 HEAVY DUTY TURNTABLE 443-62801 443-64501 CEMB TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-62801 443-64501 443-91825 MFG. NO. SM628BPS SM645HPA SM825 POWER SUPPLY 220VAC 110VAC 110 VAC CLAMPING 14" - 27" 14" - 26" 15" - 26" OUTSIDE CLAMPING 11" - 24" 12" - 24" 13" - 24" MAX TIRE OUTSIDE 44" 47" 47" BEAD BREAKER FORCE 6393 lb. 6790 lb. 5500 lb. MAX RIM WIDTH 15.5" 13.5" 15" GROSS SHIPPING WEIGHT 630 lb. 1050 lb. 630 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
290 SERVICE EQUIPMENT Corghi Tire Changers A20241TI 2-SPEED TILT BACK TIRE CHANGER • Ideal for all OEM and aftermarket wheels • Preferred market choice for reliablity and long lasting performance STURDY A2030 2-SPEED TILT BACK TIRE CHANGER • Ideal for all OEM and aftermarket wheels • Preferred market choice for reliablity and long lasting performance BUILT-IN BEAD BREAKER SHOVEL 443-01274 443-18134 CORGHI TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-01274 443-18134 MFG. NO. A2024TI A2030 POWER SUPPLY 115V/1ph/60hz 115V/1ph/60hz CLAMPING 12"-26" 12"-28" OUTSIDE CLAMPING 10"-24" 10"-26" MAX TIRE OUTSIDE 40" 43" MAX RIM WIDTH 26" 28" GROSS SHIPPING WEIGHT 600 lb. 620 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT
SERVICE EQUIPMENT 291 AM50 LEVERLESS TIRE CHANGER AM500 AUTOMATIC TIRE CHANGER • Leverless design allows it to easily handle the toughest tire and wheel combinations in the market today • Dynamic bead breaking discs & newly designed head group provides fast & smooth operation • Leverless design allows it to easily handle the toughest tire and wheel combinations in the market today • Dynamic bead breaking discs & newly designed head group provides fast & smooth operation AM5000 TIRE CHANGER • The Touchless system keeps the working tools away from the wheel making OEM, Low Profile, and Run Flat tires simple, safe and fast to change • The wheel lift and helper arm are standard TOUCHLESS SYSTEM WHEEL LIFT & HELPER ARM "LEVA LA LEVA" (WITHOUT LEVER) CORGHI TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-05034 443-08234 443-18834 MFG. NO. AM50 AM500 AM5000 POWER SUPPLY 110V/1ph/50hz 110V/1ph/50hz 110V/1.31ph/50-60hz CLAMPING — — — OUTSIDE CLAMPING — — — MAX TIRE OUTSIDE 47" 47" 47" MAX RIM WIDTH 30" 32" 28" GROSS SHIPPING WEIGHT 760 lb. 980 lb. 1290 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
292 SERVICE EQUIPMENT AM26J ARTIGLIO MASTER TIRE CHANGER • The Touchless system keeps the working tools away from the wheel making OEM • Low profile, and run flat tires simple, safe and fast to change • The wheel lift and helper arm are standard • Dual bead breaker • Bead depressor AM28 ARTIGLIO MASTER TIRE CHANGER ARTIGLIO MASTER CODE TIRE CHANGER • The Touchless system keeps the working tools away from the wheel making OEM • New demounting tool head • Dynamic bead breaking device • Rapid demounting procedure • Universal wheel clamping system • Adjustable working height • Wheel lifter to effortlessly place wheels onto turntable • The Touchless system keeps the working tools away from the wheel making OEM • Automatic wheel dimension acquisition enabling automatic tool positioning • Touch screen system to guide user through all procedures and solutions • Compatible with all tire types ALL WITH TOUCHLESS TECHNOLOGY 443-16235 443-16234 443-08514 CORGHI TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-08514 443-16234 443-16235 MFG. NO. Mastercode AM26J AM28 POWER SUPPLY 110V/1.31ph/50-60hz 110V/1.31ph/50-60hz 230V/0.98 kW/50 Hz CLAMPING — — — OUTSIDE CLAMPING — — — MAX TIRE OUTSIDE 47" 40" 40" MAX RIM WIDTH 32" 26" 28" GROSS SHIPPING WEIGHT 1,675 lb. 1080 lb. 970 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT
SERVICE EQUIPMENT 293 A9222 SWING ARM TIRE CHANGER A9824 2-SPEED SWING ARM TIRE CHANGER • Turntable with two pneumatic cylinders capable of clamping any types of rim securely • Extractable pedal controls for easy inspection of control area • User-friendliness, reliability and high performance are the characteristics that make the A9222 ideal for users who need a versatile tool at an extremely competitive price • For passenger and light trucks • Built for high volume shops at an affordable price • Designed to handle passenger, light truck and motorcycle wheels A9830 2- SPEED SWING ARM TIRE CHANGER • Built for high volume shops at an affordable price • Designed to handle passenger, light truck and motorcycle wheels UNIQUE MOUNT/ DEMOUNT HEAD HEA TURNT 443-01764 443-92220 443-19004 CORGHI TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-92220 443-01764 443-19004 MFG. NO. A9222 A9824 A9830 POWER SUPPLY 110V/1ph 115V/1ph/60hz 115V/1ph/60hz CLAMPING 13"-25" 12"-26" 12"-28" OUTSIDE CLAMPING 10"-22" 10"-24" 10"-26" MAX TIRE OUTSIDE 42" 47" 47" MAX RIM WIDTH 3.5"-12.5" 26" 28" GROSS SHIPPING WEIGHT 760 lb. 600 lb. 635 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
294 SERVICE EQUIPMENT Tire Changer Accessories COATS REPLACEMENT AIR HOSE TIRE CHANGER LUBE BOTTLES AND SWABS • For use with Coats Tire Changers • 60" long x 1/4" diameter • AC-1 Euro-style chuck • All brass connectors • Swivel fitting • Packaged 1 per bag RIM CLAMP BEAD LIFTING TOOL • Designed f during the tir • 20" o from a dur vanadium ma ASCOT NO. MFG. NO. 444-81354 127-86871 LONG SOCK FOR BEAD LIFTING TOOL 844-16259 • High quality plastic sleeve prevents the rims from scratching while lifting the bead • Made from high quality, durable nylon • Ribbed design for anti-slip contact DESCRIPTION TC181354 Rim Clamp Bead Lifting Tool ASCOT NO. MFG. NO. DESCRIPTION 127-86871 86871-1 844-16572 HUNTER REPLACEMENT AIR HOSE • 60" long x ¼" diameter • European -style air chuck • All brass connectors • Packaged 1 per bag 60" x ¼" Coats Replacement Air Hose ASCOT NO. MFG. NO. DESCRIPTION 444-22019 220019 Long Sock for Bead Lifting Tool - 4 Pack LOW PROFILE BEAD LEVER TOOL 127-86872 ASCOT NO. MFG. NO. DESCRIPTION 437-00001 437-00002 437-00003 437-13014 844-16259 TS-1 TS-2 TS-3 313014 844-16572 106572 • Angled design and extra-long length provide increase leverage • Super-grip knurled handle for increase grip • Durable high strength carbon steel contruction • Reduces strain on user's hand and wrist • Provides technician better control of the tool against stiff side walls • Helps protect against damaging expensive wheels 11" OAL x 2" Swab Diameter 15" OAL x 2" Swab Diameter 18" OAL x 3" Swab Diameter 106259 Lube Bottle. Rim Clamp® Hunter-Style Tire Lubricating Brush . Fits RC-15, RC-20, 5060 and 5070 Series Tire Changers Lube Bottle. Center-Post. Fits 4040, 4040SA and 4050 Tire Changers ASCOT NO. MFG. NO. DESCRIPTION 127-86872 86872-1 Hunter Replacement Air Hose 444-99719 99719 Low Profile Bead Lever Tool BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT 437-13014 437-0001
SERVICE EQUIPMENT 295 'WING' MOUNT/DEMOUNT HEAD For use with Hunter tire changer • Molded wing guides the tire bead into the drop center • Prevents the tire from moving above the knuckle • Faster and easier mounting process ASCOT NO. MFG. NO. DESCRIPTION 444-01226 JRP11-8-11400327 'Wing' Mount/Demount Head ADAPTER KIT FOR 'WING' MOUNT/DEMOUNT HEAD Allows for compatibility with all Coats X-Series and RC Series tapered shaft • ADAPTER ONLY - Duckhead sold seperately • Lightweight aluminum design • Precision CNC manufactured ASCOT NO. MFG. NO. 444-01227 DESCRIPTION J760-424-B33CW Adapter Kit for 'Wing' Mount/Demount Head 444-01227 NYLON MOUNT/DEMOUNT HEAD ONLY Replacement For Accuturn 20024335 • Use With Models 7700, 8910, 8911, 8922, 8944, and 8989 • Replacement For Hofmann 20024335 • Replacement For FMC/John Bean EAA 24335 • For Use On EHP Series Tire Changers • Replacement For Snap-On 24335. For Use On All Models • Head Only ASCOT NO. MFG. NO. 444-01228 DESCRIPTION TC20024335 Nylon Mount/Demount Head Only 444-01229 BRACKET W/ HARDWARE FOR MOUNT/DEMOUNT KIT Bracket & Screw Kit for TC14024784 Duckhead kit • Facilitates conversion from metal head to plastic head • Pairs with TC20024335 Duckhead • Black steel construction • Bracket is reusable when Duckhead is replaced • Precision machined ASCOT NO. MFG. NO. DESCRIPTION 444-01229 TC200250000 Bracket w/ Hardware for TC14024784 Mount/Demount Head Kit NYLON TOOL HEAD FOR HUNTER TIRE CHANGERS Replacement For Hunter RP6-710014120 • For Use On TCA34 With Serial Number 664 And Above • Tool Head For Hunter TCA34 Tire Changers ASCOT NO. MFG. NO. DESCRIPTION 444-01230 TC14120 Nylon Tool Head for Hunter Tire Changers NYLON MOUNT/DEMOUNT HEAD FOR COATS, CORGHI & HUNTER TIRE CHANGERS Application chart below: OEM All Tool Coats Corghi Giuliano Part Number Tire Changer All models RC1, 5, 10, 15, 20 Early 5060, 9010, 9024, APX90 All rim clamp (optional accessory) 3008403 Hofmann 8314813 Hunter Sice 8314813 ASCOT NO. MFG. NO. 444-01222 TC450310 RP11-8314813 Shaft must be turned 180° for this head to work All earlier models except 1550, 1620, 1625 TCX Series (RP11-5-400-100 Adapter required) TCX500 Requires Upgrade Shaft & Adapter Kit M39, S40, S41, S42, S43, S45, S408MAXI, S435, S436, S436TOP DESCRIPTION Nylon Mount/Demount Head for Coats, Corghi & Hunter Tire Changers RED PLASTIC HUNTER MOUNT/DEMOUNT HEAD Larger channel for difficult wheels • Specifically designed for low profile tires For Hunter TCA34 tire changers • Application chart below: OEM Hunter Part Number Tire Changer 221-675-2 221-675-2-B ASCOT NO. MFG. NO. 444-01224 TCR343 DESCRIPTION Red Plastic Hunter Mount/Demount Head TC250, TC300, TC325, TC350, TC2000, TC3250, TC3500 TC250, TC300, TC325, TC350, TC2000, TC3250, TC3500 444-01222 444-01228 G3008403 83008403 450310 444-01230 444-01226 444-01224 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
296 SERVICE EQUIPMENT Tire Changer Accessories (cont.) NYLON MOUNT/DEMOUNT HEAD, COATS & HUNTER STYLES ASCOT NO. MFG. NO. DESCRIPTION 444-01220 444-01221 TC183061-A VT-1221 Nylon Mount/Demount Head (Coats Style) Nylon Mount/Demount Head (Hunter Style) 444-01220 GREY NYLON DUCKHEAD • Grey nylon mount/demount head kit for low profile tires • Use with difficult wheels • COMPATIBLE WITH THE COATS TIRE CHANGERS: 5030, 5040, 5050, 5060, 5065, 6050, 6060, 6065, 7050, 7055, 7060, 7065, 7655, 7660, 7665 444-01221 ASCOT NO. MFG. NO. 444-01223 DESCRIPTION TC184432 Grey Nylon Duckhead Kit for Coats Tire Changers STAINLESS STEEL DUCKHEAD FOR COATS TIRE CHANGERS • Tapered stainless steel mount/demount head used on many Coats tire changers • For steel wheels and high-volume shops dealing mostly with OEM passenger cars and light trucks • FOUND ON COATS MODELS: 5030, 5040, 5045, 5050, 5060, 5065, 5070, 6050, 6060, 6065, 7050, 7055, 7060, 7065, 7655, 7660, 7665, 70XEH1, 70XEH2, 70XEH3 • Includes the set screws for adjusting the angle ASCOT NO. MFG. NO. 444-01225 DESCRIPTION TC182788 Stainless Steel Duckhead for Coats Tire Changers 444-01225 PLASTIC RIM PROTECTORS FOR COATS STAINLESS STEEL MOUNT/DEMOUNT HEADS • Designed for COATS stainless steel mount/demount heads • Made from a durable plastic material to prevent marring or scratching • Available in packs of 2 or 12 444-82961, 444-82963 ASCOT NO. MFG. NO. 444-82961 444-82963 DESCRIPTION TI182961 TI182963 2-Pack of Plastic Rim Protectors for Coats Stainless Steel Mount/Demount Head 12-Pack of Plastic Rim Protectors for Coats Stainless Steel Mount/Demount Head BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT
SERVICE EQUIPMENT 297 CEMB Heavy Duty Tire Changers CM27T HEAVY DUTY TRUCK TIRE CHANGER • For tube and tubeless type tires used on over-the-road Class 8 commercial trucks and some off-road tractor tires and rims • The pivoting four-jaw clamping chuck aids as a wheel lift and prevents liabilities of manual truck tire changing by allowing the machine to perform all the heavy lifting and service work • Mobile cable control unit • Bi-directional rotation • Self centering universal wheel chuck • Rim pliers and rim lever standard MOBILE CABLE CONTROL UNIT SM56T HEAVY DUTY TIRE CHANGER • For tube and tubeless tires used on heavier off-road farm and commercial use tractors • Mobile cable control unit • Two speed hydraulic pump motor • Bi-directional rotation RIM PLIERS AND RIM LEVER • Self-centering four jaw clamping jaw drive system which doubles as a wheel lift • Rim pliers and rim lever standard 446-00027 MOBILE CABLE CONTROL UNIT 2-SPEED HYDRAULIC PUMP MOTOR RIM PLIERS AND RIM LEVER CEMB HEAVY DUTY TIRE CHANGER SPECIFICATIONS ASCOT NO. 446-00027 446-00056 MFG. NO. CM27T SM56T POWER SUPPLY 220 VAC 220 VAC RIM CLAMPING RANGE 13" - 27" 14" - 46" MAX TIRE OUTSIDE 63" 90.5" MAX TIRE WIDTH 30" 42" MAX TIRE WEIGHT 3300 lbs. 3300 lbs. BEAD BREAKER FORCE 4100 lbs. 6000 lbs. SHIPPING WEIGHT 1415 lbs. 2000 lbs. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
298 SERVICE EQUIPMENT Corghi Heavy Duty Tire Changers HD700 HEAVY DUTY TIRE CHANGER • For demounting and mounting inner tube and tubeless type tires for trucks, buses and industrial vehicles with annular groove or elastic ring type rims • Can be used to work easily on any rim size up to 26" HD1300 HEAVY DUTY TIRE CHANGER • Extremely compact dimensions for working with complete peace of mind on truck, agricultural machine and earth moving machine wheels • Features a sturdy and robust operated tool arm HD1300R HEAVY DUTY TIRE CHANGER (WIRELESS) FOR INNER TUBE & TUBELESS TYPE TIRES WIRELESS ANY RIM SIZE UP TO 26" COMPACT IN SIZE 504 • Extremely compact dimensions for working with complete peace of mind on truck, agricultural machine and earth ving machine wheels • Features a dy and robust operated tool arm 443-03514 CORGHI TIRE CHANGER SPECIFICATIONS ASCOT NO. 443-01804 443-03504 443-03514 MFG. NO. HD700 HD1300 HD1300R POWER SUPPLY 208 vac +/-10%,3 ph., 30 amp circuit 208 vac +/-10%,3 ph., 30 amp circuit 208 vac +/-10%,3 ph., 30 amp circuit MAX TIRE OUTSIDE 63" 86" 86" MAX RIM WIDTH 26" 56" 56" GROSS SHIPPING WEIGHT 1500 lb. 2450 lb. 2450 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT
SERVICE EQUIPMENT 299 MONSTERAGTT HEAVY DUTY TIRE CHANGER HD1400 HEAVY DUTY TIRE CHANGER • Semi-automatic tire changer • Capable of handling tire widths of up to 58" and a maximum wheel weight of 4189 lb. • Electrichydraulic operation • Fea STOP function, guaranteeing no savings while the machine is no • Significant reduction in strain • High protection of rims and tires • High performance • Maximum safety • Reliable universal application HD1800 HEAVY DUTY TIRE CHANGER • Works on mining, forestry and agricultural wheels and tires up to 118" and 6,600 lb. • Cordless remote ol • Automatic tool head HEAVY DUTY START & STOP FUNCTION MAXIMUM SAFETY 443-01504 ELECTRICHYDRAULIC OPERATION RIM & TIRE PROTECTION RIM & TIRE PROTECTION HEAVY DUTY CORDLESS REMOTE 443-00409 443-04002 CORGHI TIRE CHANGER SPECIFICATIONS ASCOT NO. 443-00409 443-04002 443-01504 MFG. NO. HD1400 HD1800 MonsterAGTT POWER SUPPLY 208 vac +/-10%,3 ph., 30 amp circuit 208 vac +/-10%,3 ph., 30 amp circuit 208 vac +/-10%,3 ph., 30 amp circuit MAX TIRE OUTSIDE 98.5" 118" 98" MAX RIM WIDTH 58" 50" 58" GROSS SHIPPING WEIGHT 2960 lb. 5350 lb. 3500 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
300 SERVICE EQUIPMENT CEMB Digital Wheel Balancers ER72 DIGITAL WHEEL BALANCER • Professional digital wheel balancer especially designed for tire dealers • Automatic Distance & Diameter Entry with Width Sonar (3D) • Fully automatic Spotter Laser System for best correction possible • Full-time accuracy with Static unbalance always displayed on screen • LED to light the work space inside the rim • New automatic arm to measure automatically diameters up to 30" • Standard locking with Quick Nut • Electromagnetic brake for easy weight placement • Available 110VAC or 220VAC • Wide working space • Direct selection ounces/grams • Optimization program for compensation of rim and tire unbalance • One Button Split & Hidden Weight Program ER75 DIGITAL WHEEL BALANCER • A high volume RFV diagnostic wheel balancer, which comes in two variations, uniquely uses advanced balancing features such as Dynamic AutoAdaptive with One-Plane Balancing and RFV measurement combined with HubMatch • All the best features from CEMB balancers are combined with HubMatch to ensure the assembly is round when rolling on the vehicle • The ER75TD is available with either manual locking or pneumatic locking • One Plane Balancing; Offers a single ideal correction plane, indicating the exact point within the rim where the wheel can be balanced. Minimizing both static and dynamic unbalance, using a single counterweight thus saving time • HubMatch® balancing clocks the RFV high point of the assembly to the vehicle hub before mounting it at the 12 o’clock position. WIDE WORKING SPACE EZ10 3D DATA ENTRY WHEEL BALANCER • Space-Saver wheel balancer • Exclusive direct weight placement 3D inner data entry arm uses 3D Virtual Sonar and AutoAdaptive enhancement software to provide a faster, higher quality wheel balance service • Eliminates the time and hassle of caliper rim width data entry • Motorized, fast 5-second average cycle time • High quality, robust design, extremely accurate balancing with a simple to use interface • Electro-magnetic brake holds wheel steady for easier weight placement • Handles steel and custom wheels with choice of clip-on, tape weight and hidden spoke modes up to 30” rim diameter • Great for small garages, repair shops or back up to larger machines • 110v, 50/60 Hz. SPACE 481-00072 481-00010 ELECTROMAGNETIC BRAKE 481-00075 ASCOT NO. MFG. NO. 481-00072 ER72 DESCRIPTION ER72 Digital Wheel Balancer ASCOT NO. MFG. NO. 481-00075 ER75 DESCRIPTION ER75 Digital Wheel Balancer ASCOT NO. MFG. NO. 481-00010 EZ10 DESCRIPTION EZ10 3D Data Entry Wheel Balancer BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT
SERVICE EQUIPMENT 301 CEMB Digital Wheel Balancers (cont.) C212 MOTORIZED DIGITAL TRUCK WHEEL BALANCER WITH PNEUMATIC LIFT • C212 balances steel & light alloy wheels of cars, light & heavy commercial trucks and bus thanks to a 40mm shaft and a large assortment of adaptors and cones standard • Pneumatic stationary brake useful during wheel mounting and counterweight application • Pedal operated pneumatic lift (soft type) enables excellent centering accuracy of the wheel on the shaft • Automatic Distance & Diameter Entry (2D) • Fully Automatic Cycle with Breaking • 51" wheel guard • Self-Diagnosis and Self-Calibration • MENUS FOR QUICK SELECTION OF THE FOLLOWING: Inches to millimeters, unbalanced thresholds 0.1 or 0.25 ounces (1 or 5g) • Direct selection ounces/grams • Optimization program for compensation of rim and tire unbalance • "Static" program—plus 4 ALU programs for PAX, light alloy or special shaped rims • One Button Split & Hidden Weight Program • Direct weight location program (no repositioning of stick-on weights) PNEUMATIC STATIONARY BRAKE C206 MOBILE HAND SPIN TRUCK WHEEL BALANCER FULLY AUTOMATIC CYCLE • Mobile Hand Spin Truck Wheel Balancer for cars and light & commercial trucks • C206 balances HD truck and bus tires as well as light truck and car tires • Portable for mobile service when 12VDC available • Automatic Distance & Diameter Entry (2D) • Standard lightweight battery pack for use when power not available • Self-Diagnosis and SelfCalibration • MENUS FOR QUICK SELECTION OF THE FOLLOWING: Inches to millimeters, unbalanced thresholds 0.1 or 0.25 ounces (1 or 5g) • Direct selection ounces/grams • Optimization program for compensation of rim and tire unbalance • "Static" program—plus 4 ALU programs for PAX, light alloy or special shaped rims • One Button Split & Hidden Weight Program • Direct weight location program (no repositioning of stick-on weights) PORTABLE FOR MOBILE SERVICE 481-00206 481-00212 ASCOT NO. MFG. NO. 481-00212 C212 DESCRIPTION Motorized Digital Truck Wheel Balancer with Pneumatic Lift ASCOT NO. MFG. NO. 481-00206 C206 DESCRIPTION Mobile Hand Spin Truck Wheel Balancer WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
302 SERVICE EQUIPMENT Corghi Wheel Balancers EM9250 LED DISPLAY WHEEL BALANCER • Compact design • More programs and features than competitive LED display units EM9280 MONITOR DISPLAY WHEEL BALANCER The display and weight tray. • Balancing with monitor, compact and essential with professional performance • LCD MONITOR: High resolution graphics and dedicated software • SMART-ARM: Electronic input of wheel diameter and distance with FSP function which automatically activates the balancing programs, avoiding keypad selection • AWD AUTOMATIC SENSOR (Auto width Device): For contactless measurement of wheel width • Quick and intuitive sensitivity calibration ET88 WHEEL BALANCER • Top-of-the-range balancing machine for truck wheels • Low balancing speed, optimization of average balancing speed • 7 ALU truck and car programs • Automatic acquisition of wheel/ machine distance • Adhesive weight application device • Stunning userfriendly graphic interface • Automatic wheel weight application position search • Visual wheel wobble inspection • Automatic identification of fitted wheel (truck/car) • OPT FLASH and 200kg lift with safety handle GREAT FOR TRUCK WHEELS The spin unit. OPT FLASH 443-09557 443-95207 CORGHI TIRE CHANGER SPECIFICATIONS ASCOT NO. 443-00088 443-95207 443-92801 MFG. NO. ET88WL EM9250 EM9280 POWER SUPPLY 230V-1ph-50hz 110V-1ph-60hz 110V-1ph-60hz MAX TIRE OUTSIDE 52" 44" 44" GROSS SHIPPING WEIGHT 562 lb. 350 lb. 380 lb. 443-00088 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT
SERVICE EQUIPMENT 303 Corghi Wheel Balancers (cont.) EM9550 PLUS LED DISPLAY WHEEL BALANCER • Larger design • More programs and features than competitive LED display units • Wheel dimension detection with digital gauge • Automatic wheel positioning • LED light to brighten the work area • Quick application of adhesive counterweights • Manual wheel clamping w/quick ring • DISPLAY PANEL: High resolution graphics • AWC (Auto Width Calculation): Reduced wheel data entry time with the AWC function which suggests the most probable width value • WEIGHT TRAY: Many large trays to house counterweights and various tools • Inclined front side for operator access • Space-saving wheel guard AUTO WHEEL POSITION EM9580 PLUS MONITOR DISPLAY WHEEL BALANCER WITH SONAR DISPLAY PANEL • Balancing with monitor, compact and essential with professional performance • LCD MONITOR: High resolution graphics and dedicated software • SMART-ARM: Electronic input of wheel diameter and distance with FSP function which automatically activates the balancing programs, avoiding keypad selection • AWD AUTOMATIC SENSOR (Auto Width Device): For contactless measurement of wheel width • Quick and intuitive sensitivity calibration • Sonar included SMART ARM LCD MONITOR 443-09557 443-09587 CORGHI TIRE CHANGER SPECIFICATIONS ASCOT NO. 443-09557 443-09587 MFG. NO. EM9550 EM9580 POWER SUPPLY 110V-1ph-60hz 110V-1ph-60hz MAX TIRE OUTSIDE 44" 44" GROSS SHIPPING WEIGHT 440 lb. 440 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
304 SERVICE EQUIPMENT EM9980C PLUS DIAGNOSTIC WHEEL BALANCER • For passenger cars, light trucks and motorbikes • TOUCHLESS SYSTEM: High precision laser sensors automatically and quickly measure wheel dimensions • Automatic wheel positioning • Integrated led light illuminates the work area • Precision counterweight application • High-precision laser measurement of wheel run-out • Touchscreen Interface • USB ports for peripheral devices and software upgrades • MULTI-FUNCTION (ONE-TOUCH) BUTTON: Quick program selection • WEIGHT TRAY: Many large trays to house counterweights and tools • Spacesaving wheel guard • Inclined front side for operator access • Rear splash guard EYELIGHT PLUS DIAGNOSTIC WHEEL BALANCER • For passenger cars, light trucks and motorbikes • AUTOMATIC, PRECISE WHEEL CLAMPING: Reduces work time • TOUCHLESS SYSTEM: High precision laser sensors automatically and quickly measure wheel dimensions • Automatic wheel positioning • Integrated led light illuminates the work area • Precision counterweight application • High-precision laser measurement of wheel run-out • IPOS (Intelligent Positioning) • Touchscreen Interface • USB ports for peripheral devices and software upgrades • MULTI-FUNCTION (ONE-TOUCH) BUTTON: Quick program selection • WEIGHT TRAY: Many large trays to house counterweights and tools • Space-saving wheel guard • Inclined front side for operator access • Rear splash guard ET66 MOTOR DRIVEN BALANCER • Precise motor-driven balancer designed for heavy duty wheels and can also accommodate passenger wheels • Compact, easy to use and reliable • LED display provides ease of use, manual data entry and comes with dynamic, static, and alum programs • Low balancing speed reduces spin times • User-friendly keyboard 443-90201 HEAVY DUTY 443-09983 COMPACT & EASY TO USE CORGHI TIRE CHANGER SPECIFICATIONS ASCOT NO. 443-09983 443-01101 443-90201 MFG. NO. EM9980C Eyelightpls ET66 POWER SUPPLY 10V/220V 60hz 110V/200V 60hz 110V/1ph/60hz MAX TIRE OUTSIDE 44" 44" 52" GROSS SHIPPING WEIGHT 550 lb. 605 lb. 485 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT
SERVICE EQUIPMENT 305 Wheel Balancer Accessories HAWEKA QUICK PLATE TUNER TIP • Replacement Quick Tip for use with Haweka Quick Plate System • Replicates aftermarket wheel vehicle lug mount • Must be used on all aftermarket wheels for proper centering • Aftermarket tuner type Quick Tip • 58mm length, 19.5mm diameter ASCOT NO. MFG. NO. DESCRIPTION 483-27382 HW273E008 023 Haweka Quick Plate Tuner Tip 483-27382 HAWEKA HUB CENTERING SOLUTIONS HAWEKA QUICK PLATE STANDARD TIP – 38MM • Replacement Quick Tip for use with Haweka Quick Plate System • Replicates vehicle lug mount • Standard conical type Quick Tip, short • 38mm length, 24.5mm diameter ASCOT NO. MFG. NO. DESCRIPTION 483-27383 HW273E008 003 Haweka Quick Plate Standard Tip – 38mm 483-27383 HAWEKA QUICK PLATE STANDARD TIP – 58MM • Replacement Quick Tip for use with Haweka Quick Plate System • Replicates vehicle lug mount • Standard conical Quick Tip, long • 58mm length, 22.5mm diameter ASCOT NO. MFG. NO. DESCRIPTION 483-27385 HW273E008 025 Haweka Quick Plate Standard Tip – 58mm 483-27385 HAWEKA PRO CENTERING KIT VII HAWEKA QUICK PLATE BALL SEAT TIP • Replacement Quick Tip for use with Haweka Quick Plate System • Replicates vehicle lug mount • Ball seat type Quick Tip • 48mm length, 24.5mm diameter 483-40132 ASCOT NO. MFG. NO. DESCRIPTION 483-27387 HW273E008 007 Haweka Quick Plate Ball Seat Tip 483-27387 ASCOT NO. MFG. NO. 483-40132 DESCRIPTION HW150 400 132 Haweka Pro Centering Kit VII IMPROVED CENTERING ASCOT NO. MFG. NO. 482-25411 482-26460 482-26462 482-26463 482-26464 482-25491 483-40132 DESCRIPTION HW150 400 110 9 Piece Pro Collet Kit HW160 400 060 Ford Precision Collet HW160 400 062 Toyota Precision Collet HW160 400 063 Chrysler Precsion Collet 1 HW160 400 064 Chrysler Precsion Collet 2 HW150 400 091 Cone Kit 40mm: Light Truck HW150 400 132 Haweka Pro Centering Kit VII Note: All Hub Centering Products also available in 28, 36, 38mm except Duo Expert 483-40132 HAWEKA QUICK PLATE LAND ROVER TIP • Replacement Quick Tip for use with Haweka Quick Plate System • Specific vehicle lug mount replication for Land Rover applications • Land Rover type Quick Tip, short • 38mm length, 34.5mm diameter 483-27389 ASCOT NO. MFG. NO. 483-27389 DESCRIPTION HW273E008 009 Haweka Quick Plate Land Rover Tip WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
306 SERVICE EQUIPMENT Wheel Balancer Accessories (cont.) HAWEKA LUG CENTERING SOL HAWEKA KITS 483-99409 ASCOT NO. MFG. NO. 483-99409 482-25649 DESCRIPTION HW200 299 409 U.S. Flange Plate Kit 40mm HW210 400 002 Quick Plate Kit: 40mm 482-28147 Note: Flange Plates and Quick Plates also available in 28, 36, 38mm ASCOT NO. MFG. NO. 482-28147 482-28415 482-28414 HAWEKA STORAGE SOLUTIONS HAWEKA NEW PROMAX MD KIT – 40MM ASCOT NO. MFG. NO. 482-29895 DESCRIPTION HW900 008 205 Adapter Storage Stand 482-29895 • Professional Centering Solution for 8 and 10-lug medium duty applications • Combination of spring loaded and hub pilot discs provide professional mounting solution • One lug adapter with long plug-in studs for all MD applications • PROBLEM SOLVING SOLUTION FOR: Chevy/GMC 8x180 and 8x210 applications • PROBLEM SOLVING SOLUTION FOR: Ford 8x170, 8x200 and 10x225 applications • Problem solving solution for all 8x6.5 applications • Application chart for plate and collet look up by vehicle included HAWEKA MEDIUM DUTY WHEEL BALANCER ACCESSORIES PRO CENTERING KIT DESCRIPTION HW280 400 147 ProCentering System HW280 400 139 ProMax MD 40mm HW280 400 142 ProMax MD Standard 40mm APPLICATION CHART INCLUDED 482-21374 ASCOT NO. MFG. NO. 482-21374 482-27404 482-26447 482-26448 482-26467 482-29452 482-29460 482-29462 482-29471 482-28444 DESCRIPTION HW700 400 037 Medium Duty Flange Plate HW700 400 037 Medium Duty Five Arm Star HW160 400 047 Hub Pilot Sleeve 1 - 4.88/4.92" HW160 400 048 Hub Pilot Sleeve 2 - 5.59/6.69" HW160 400 067 Hub Pilot Sleeve 7 - 4.88/6.06" HW190 400 052 Hub Pilot Sleeve 3 - 5.46/5.25" HW190 400 060 Hub Pilot Sleeve 4 - 4.56" HW190 400 062 Hub Pilot Sleeve 5 - 4.6" HW190 400 071 Hub Pilot Sleeve 6 - 4.77" HW280 400 044 Universal Adaptor 8x6.5 483-40014 ASCOT NO. MFG. NO. DESCRIPTION 483-40014 HW280 400 142 Haweka New ProMax MD Kit – 40mm BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT
SERVICE EQUIPMENT 307 Wheel Balancer Accessories (cont.) HAWEKA QUICK NUTS AND PRESSURE CUPS STEEL PROGRIP QUICKNUT WITH HANDLES AND PRESSURE CUP • Essential wheel balancer tooling • Clamping device speeds wheel mounting process on balancers • Heavy duty steel design solution for Road Force balancers HEAVY Y STEEL DESIGN 483-24486 483-40806 ASCOT NO. MFG. NO. 483-24486 483-24433 483-25433 483-25403 483-25406 483-21982 483-29821 483-29827 DESCRIPTION HW124 408 006 Quick Nut Steel w/ Hood 40-8mm HW140 404 033 Quick Nut HD (metal) 40mm-4mm HW140 403 033 Quick Nut - 40mm - 3mm HW143 283 003 Quick Nut - 28mm - 3mm HW143 283 006 Quick Nut w/ Handles - 28mm - 3mm HW190 008 002 Pressure Cup - 5" HW190 008 021 Pressure Cup - 8" HW190 008 027 Quick Nut Pressure Ring Note: Quick Nuts are also availble for 28, 36, 38m ASCOT NO. MFG. NO. 483-40806 DESCRIPTION HW124 408 006 Steel ProGrip QuickNut 40 x 8 with Handles and Pressure Cup SOFTGRIP QUICKNUTS WITH HANDLES • Essential wheel balancer tooling • Upgraded threaded jaws with bigger bearing surface allows higher torque pressure • Softgrip clamping device will not open under load • New alloy metal jaws provides longer life for threaded jaws • Torque ring is ever present – removal not required for use with pressure cup • Heavier duty pressure cup • Lower overall housing height enables use with quick or flange plates on shorter shafts HAWEKA SOFT GRIP QUICK NUT - 40 X 8 • Improved design, essential wheel balancer tooling • New ergonomic design with soft-touch handle • New metal alloy threaded jaws last longer • Larger bearing surface allows for higher torque • Pressure ring is always attached to the quick nut (a must for quick plate/flange plate use) • Optimized glide prevents fast wear of the thread shaft • Redesigned, heavy duty pressure cup • Improved quick action mechanism prevents opening under load • Lower housing height for shorter shafts and larger profile wheels...always grabs the thread • Lighter weight, easier to handle due to lower housing height HEAVIER DUTY SOFTTOUCH HANDLE 483-40301 PRESSURE CUP HEAVY DUTY 483-40401 PRESSURE CUP 483-40801 NEW ALLOY METAL JAWS 483-40800 ASCOT NO. MFG. NO. 483-40800 DESCRIPTION HW125 408 000 Haweka Soft Grip Quick Nut – 40 x 8 ASCOT NO. MFG. NO. 483-40301 483-40401 483-40801 DESCRIPTION HW125 403 001 SoftGrip Quick Nut 40 x 3 with Handles HW125 404 001 SoftGrip Quick Nut 40 x 4 with Handles HW125 408 001 SoftGrip Quick Nut 40 x 8 with Handles WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
308 SERVICE EQUIPMENT PRESSURE CUP FOR HAWEKA SOFT GRIP QUICK NUTS PRESSURE RING FOR ALL PROGRIP QUICKNUTS • Must be used with rubber ring (HW190 008 005) • Works with all Soft Grip Quick Nuts (Not standard quick nuts) • Rigid, heavy duty design prevents flex during balancer spin • Long lasting, hard plastic composition • Snap Connects easily to Soft Grip Quick Nuts 483-08065 ASCOT NO. MFG. NO. 483-08065 DESCRIPTION HW190 008 065 Pressure Cup for Haweka Soft Grip Quick Nuts ASCOT NO. MFG. NO. 483-08027 • Pressure Ring must be present on ProGrip QuickNuts when using Quick or Flange Plates • Without the pressure ring, the clamping device does not provide enough torque pressure to press rim on cones/collets evenly and consistently eliciting inaccurate balancing results 483-08027 DESCRIPTION HW190 008 027 Pressure Ring for all ProGrip QuickNuts BACKING SPRING PROGRIP PRESSURE CUP • Pressure Cup for all ProGrip Quicknuts 40mm, 38mm, 36mm, 28mm • HW143 403 003, HW143 403 006, HW143 383 003, HW143 383 006, HW143 363 003, HW143 363 006, HW143 283 003, HW143 283 006, HW143 404 003, HW143 404 006, HW143 285 006, HW143 405 006, HW140 403 033, HW140 404 033 • Must be present on all balancers with open mid centering devices/hubs (Coats) • Without backing spring, wheels can only be front coned – not acceptable for proper balancing ASCOT NO. MFG. NO. 483-40015 DESCRIPTION HW190 400 015 Backing Spring 483-40015 UNIVERSAL SPACER & UNIVERSAL DONUT 483-08002 • Spacer provides necessary distance between mid centering device and cone/collet to prevent bottoming out and/or mid centering cup interference • Must use spacer with ProCollets 7-9 • Donut required for use with backing spring on open mid centering device balancers (Coats) ASCOT NO. 483-08002 MFG. NO. HW190 008 002 DESCRIPTION PROVIDES ProGrip Pressure Cup NECESSARY RUBBER COVER FOR 5" PRESSURE CUP • Provides rubberized protection between wheel rim and pressure cup 483-40045 483-08005 ASCOT NO. MFG. NO. 483-08005 DESCRIPTION HW190 008 005 Rubber Cover for 5” Pressure Cup ASCOT NO. MFG. NO. 483-08047 483-40045 483-40047 DESCRIPTION HW190E008 047 Universal Spacer HW190E008 045 Universal Donut HW190E400 045 Universal Donut - 40mm BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT
SERVICE EQUIPMENT 309 Wheel Balancer Accessories (cont.) NORTH AMERICAN FLANGE PLATE KIT 40MM • Replicates vehicle wheel lug mount on the balancer • Provides consistent, even pressure when mounting wheel on cones/collets for precision balancing results PRECISION DESIGNED TOYOTA PRECISION COLLET • Precision-designed, application-specific solution for balancing Toyota Truck wheels • Problem-solving precision collet for Toyota Tundra, Sequoia, Tacoma, 4Runner, FJ as well as Lexus SUV applications and more 483-99409 APPLICATION SPECIFIC 483-40060 ASCOT NO. MFG. NO. 483-99409 DESCRIPTION HW200 299 409 North American Flange Plate Kit 40mm ASCOT NO. MFG. NO. 483-40060 LIGHT TRUCK CONE KIT 40MM • Covers hub ranges 120mm174mm • Kit includes a cone and distance spacer • Works on all balancer makes and models with 40mm shaft 483-40091 ASCOT NO. MFG. NO. 483-40091 DESCRIPTION HW150 400 091 Light Truck Cone Kit 40mm DESCRIPTION HW160 400 062 Toyota Precision Collet FORD PRECISION COLLET • Precision-designed, application-specific solution for balancing Ford light truck and SUV applications • Problem-solving precision collet for Ford F150, Expedition and Lincoln Navigator applications PRECISION DESIGNED HAWEKA DUO COLLET SPACER – 40MM APPLICATION SPECIFIC • Provides spacer and additional strength between Duo Collets and MCD Spring • Recommended for use on Coats balancers ASCOT NO. MFG. NO. 483-40001 HW190 400 010 Haweka Duo Collet Spacer – 40mm 483-40001 DESCRIPTION 483-40062 ASCOT NO. MFG. NO. 483-40062 DESCRIPTION HW160 400 060 Ford Precision Collet WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
310 SERVICE EQUIPMENT Challenger Lifts CL10 SERIES 10,000 LB. CAPACITY TWO-POST LIFT COMPLETE PRODUCTIVITY: Conventional Power Controls, Versymmetric® offset 3-stage front and rear arms • Versymmetric® offset front arms provide directSPOT™ to vehicle lift points and safely lifts both symmetrically and asymmetrically within the same service bay maximizing service capabilities and revenue potential • Padded overhead shut off system prevents vehicle damage from being raised too high. • Oversized 5" diameter pulley and heavy duty 5/16" cable reduces stress on equalization system and increases cable life • Fully gusseted base plate design reduces column deflection. 48" elongated carriage design decreases load on bearing • Single point mechanical lock release system with jacket coated protection and no lock cable pulleys, and double clutch release bar protects cable from stretching while disengaging both column locks simultaneously • 11' 8" standard height with 2' and 3' extensions available allows lift to be placed in standard service bay with 12' ceiling • Rubber door guards provide added security against vehicle door damage Versymmetric Versymmetric 2 Lifts in One Why should you be forced to decide what type of vehicles you service the most? • Asymmetric Lifts accommodate 70% of top 20 selling vehicles, Symmetric Lifts accommodate 30% of the top 20 selling vehicles • Versymmetric® Lifts ASCOT NO. MFG. NO. 304-00010 CL10 DESCRIPTION CL10 Series: 10,000 lb. Capacity Two-Post Lift accommodate 100% of the top 20 selling vehicles, properly lifts cars, trucks, vans and SUVs with one lift CHALLENGER 2-POST LIFT SPECIFICATIONS ASCOT NO. MFG. NO. 304-00010 CL10 MAX. CAP. (LB.) 10,000 OVERALL WIDTH 11' 6-1/2" to 11' 11" BETWEEN COLUMNS 110" to 114-1/2" DRIVE-THRU WIDTH 100-1/2" to 105" OVERALL HEIGHT 11' 11" UNDER BAR CLEARANCE 11' 2-1/2" FRONT ARM LENGTH REAR ARM LENGTH 27" to 41" 42" to 59" MAX. LIFT HEIGHT 74-5/8" POWER REG. 2HP, Single Phase, 208V-230V BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT SYMMETRIC ON RIGHT SIDE, ASSYMMETRIC ON LEFT SIDE
SERVICE EQUIPMENT 311 Challenger Lifts (cont.) MAXIMUM PRODUCTIVITY (CL10V3) • Conventional Power Controls • Versymmetric® Plus offset 3-stage front + 3-stage rear arms • Adjustable overhead height can now be set at 11'2" (Standard height: 11'8") ASCOT NO. MFG. NO. 304-01102 DESCRIPTION CL10V3 Maximum Productivity 304-01102 NOW WITH ADJUSTABLE HEIGHT SA10: 10,000 LB. CAPACITY TWO-POST LIFT SYMMETRIC • Challenger’s SA10 2-post lift offers 10,000 lb. capacity • You can install the SA10 in either symmetric or asymmetric position, depending on your service needs • The SA10 also features adjustable height and width options to further customize it to meet your needs. Innovative 3-stage front and 2-stage rear arms provide greater overall sweep ASCOT NO. MFG. NO. 304-00210 SA10 DESCRIPTION SA10: 10,000 lb. Capacity Two-Post Lift 304-00210 OR ASYMMETRIC POSITION CHALLENGER 2-POST LIFT SPECIFICATIONS ASCOT NO. MFG. NO. MAX. CAP. (LB.) 304-01102 304-00210 CL10V3 SA10 10,000 10,000 OVERALL WIDTH 11' 6-1/2" to 11' 11" 129" to 137-1/2" BETWEEN COLUMNS 10" to 114-1/2" 106-3/4" to 137-1/2" DRIVE-THRU WIDTH 100-1/2" to 105" 92-3/4" to 94-1/2" OVERALL HEIGHT 11' 11" 136-1/2" to 142-1/2" UNDER BAR CLEARANCE 14' 2-1/2" 131-1/8" to 137-1/8" FRONT ARM LENGTH 19-13/16" to 42" 22-3/8" to 41-1/2" REAR ARM LENGTH 37-5/8" to 60" 38-1/4" to 59" MAX. LIFT HEIGHT 74-5/8" 74-1/2" POWER REG. 2HP, Single Phase, 208V-230V 2HP, Single Phase, 60Hz WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
312 SERVICE EQUIPMENT VLE10: 10,000 LB. CAPACITY TWO-POST LIFT WITH VERSYMMETRIC® TECHNOLOGY LE12: 12,000 LB. CAPACITY TWO-POST LIFT • 3-Stage Versymmetric® front arms and 2-Stage rear arms provide a wide arm sweep for asymmetric and symmetric lifting in the same service bay • 11.875” standard height fits in service bays with 12’ ceiling height • Double telescoping screw pads with rubber foot pad • Padded overhead shut-off system prevents vehicle damage • Jacketed pulley-less single-point mechanical lock release system that was once exclusive to our CL series lifts are now standard on the VLE10 • Rubber door guards protect vehicle from door damage • Premium powder coat finish provides long-lasting durability • Plated arm restraints and arm pins inhibit rust and provide long-lasting durability • Heavy-Duty 2-stage telescoping arms provide excellent reach and retraction to accommodate vehicle lifting points • 13'-10" or 14'-7" adjustable column height accommodates higher profile vehicles and provides maximum headroom to work underneath vehicles • HeavyDuty telescoping Screw Pads • Padded overhead shut off system • Single-point mechanical lock release system allows technician to disengage both column locks simultaneously • ALI/ETL certified 304-00111 304-00120 ASCOT NO. MFG. NO. 304-00111 VLE10 DESCRIPTION VLE10 Series: 10,000 lb. Capacity Two-Post Lift with Versymmetric® Technology CHALLENGER 2-POST LIFT SPECIFICATIONS ASCOT NO. MFG. NO. MAX. CAP. (LB.) 304-00111 304-00210 VLE10 LE12 10,000 10,000 OVERALL WIDTH 131.625" 139.75" ASCOT NO. MFG. NO. 304-00120 LE12 DESCRIPTION LE12 Series: 12,000 lb. Capacity Two-Post Lift BETWEEN COLUMNS 110.25" 115" DRIVE-THRU WIDTH 98.375" 103" OVERALL HEIGHT 143.875" to 167.875" 166" to 175" UNDER BAR CLEARANCE 137" 159.5" to 168.5" FRONT ARM LENGTH 22.3125" to 39.375" 35.75" REAR ARM LENGTH 38.375" to 55.375" 54.5" MAX. LIFT HEIGHT 74.75" 77.75" POWER REG. 208-230v Single Phase, 30-amp breaker 208-230v Single Phase, 30-amp breaker BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT
SERVICE EQUIPMENT 313 Challenger Lifts (cont.) CL12-LC: 12,000 LB. CAPACITY LOW CEILING TWO-POST LIFT W/ THREE STAGE ARMS • Service more vehicles and make more money with Challenger Lifts' new CL12-LC, 12,000 lb. capacity two post low ceiling lift • The new CL12-LC comes standard with 3-stage front and 3-stage rear arms providing the advantage of lifting many common cars, trucks, vans and SUVs within rated capacity CLFP9: 9,000 LB. CAPACITY FLOOR PLATE LIFT • 10'-7/8" overall column height is ideal for servicing vehicles in a low ceiling height • Low profile drive-over floor plate for easy vehicle positioning • 3-stage front + 3-stage rear arms provide excellent reach and retraction to lift a variety of vehicles • Electric/ hydraulic heavy-duty chain lifting operation with cable equalization • Dual point mechanical pull-lock cable release system SERVICE MORE VEHICLES 3-STAGE FRONT & REAR ARMS 304-00009 T NO. MFG. NO. 304-00009 CLFP9 DESCRIPTION 9,000 lb. Capacity Floor Plate Lift ASCOT NO. MFG. NO. 304-00121 CL12-LC DESCRIPTION CL12-LC: 12,000 lb. Capacity Low Ceiling Two-Post Lift w/ Three Stage Arms FRAME ENGAGING ADAPTERS ARE REQUIRED WHEN LIFTING TRUCKS OR OTHER FRAME VEHICLES. CHALLENGER 2-POST LIFT SPECIFICATIONS ASCOT NO. MFG. NO. 304-00009 304-00121 CLFP9 CL12-LC MAX. CAP. (LB.) 9,000 12,000 OVERALL WIDTH 11' 5-1/2" 142" BETWEEN COLUMNS 109" 114-1/2" DRIVE-THRU WIDTH 98-3/16" 103-1/2" OVERALL HEIGHT N/A 143" UNDER BAR CLEARANCE N/A 136" FRONT ARM LENGTH 24 1/2" to 44-1/2" 27-1/2" REAR ARM LENGTH 24-1/2" to 44-1/2" 59" MAX. LIFT HEIGHT 79-1/8" 80-1/4" POWER REG. 2HP, Single Phase, 60Hz 2HP, Single Phase, 60HZ WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
314 SERVICE EQUIPMENT 4115 SERIES: 15,000 LB. CAPACITY FOUR POST LIFTS •All-new and wider 22” runways • Open and closed front design for better ergonomics, allowing easy access to adjustment points on both standard or long length runway racks • Improved 4-wheel alignment wheelbase for extended alignment capabilities allowing you to service both long and short wheelbase vehicles • Louvered approach ramps prevent wheel-spin and are more effective than diamond tread or abrasive strips • Keep your shop looking stylish & clean with our new and improved all enclosed front column and crossbeam design • Expect a longer and smoother operational life with our UHMW internally encapsulated slide block • Compatible with the industry’s latest imaging alignment systems • 17 locking positions with improved lock design 4P14FEX & 4P14XFX: 14,000 LB. CAPACITY FOUR POST LIFT • The highest rise in the industry provides more working room underneath vehicles • Louvered approach ramps for positive vehicle traction • Solid piece column construction provides rigidity and stability • Oversized solid machined steel pulleys for prolonged pulley and cable life • Adjustable runways to accommodate a variety of tread widths • 14 level locking positions for a variety of general service tasks • ALI/ETL certified • OPTIONAL ACCESSORIES: 7,000 lb. rolling jacks for brake and tire work; Optional bolt on alignment kit converts general service application into alignment rack HIGHEST RISE IN THE INDUSTRY SOLID PIECE COLUMN 305-41150 NEW WIDER RUNWAYS MULTIPLE CONFIGURATIONS CHALLENGER 4-POST LIFT SPECIFICATIONS ASCOT NO. 305-41150 305-41151 305-41152 305-41153 305-41400 305-41401 MFG. NO. 4115EFO (Std, Open Front, Flat) 4115XFO (Ext., Open Front, Flat) 4115EFX (Std, Closed Front, Flat) 4115XFX (Ext., Closed Front, Flat) 4P14EFX 4P14FEX 15,000 15,000 15,000 14,000 14,000 MAX. CAP. (LB.) 15,000 OVERALL WIDTH Front: 142", Rear: 141.75 Front: 142", Rear: 141.75 141.75" 141.75" LENGTH OVERALL 250.75" 277" 247.625" 275.5" 10" 10' 3/4" 20" 4-1/2" 10" 10' 3/4" 20" 4-1/2" INSIDE COLUMNS Front: 120.75", Rear: 125.5" Front: 120.75", Rear: 125.5" 125.5" 125.5" 116" 116" HEIGHT OF COLUMNS Front: 99.25", Rear: 98" Front: 99.25", Rear: 98" 98" 98" 90-1/2" 90-1/2" HEIGHT OF RUNWAYS 7" 7" 7" 7" 7" 7" WIDTH OF RUNWAYS WIDTH BETWEEN RUNWAYS 22.375" 40.625" 22.375" 40.625" 22.375" 40.625" 22.375" 40.625" 20" 20" 40" - 43" 40" - 43" MAX. LIFT HEIGHT 78" 78" 78" 78" 78" 78" POWER REG. 208-230v 208-230v 208-230v 208-230v 208-230v 208-230v BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT
SERVICE EQUIPMENT 315 Challenger Lifts (cont.) EV1020: 10,000 LB. CAPACITY IN GROUND LIFT • Offset 3-stage front and rear safety arms • 87" drive through capacity • 50% more bearing contact than competitors increases stability • Stainless steel airlock release cylinder prevents rust NEW ADDITIONS: Larger 8-1/2" diameter chrome piston • Enhanced raised wiper at top and bottom of bearing provides better grease retention • Minimizes contamination from entering into bearings CLHM-140 AND CLHM-190: HEAVY DUTY MOBILE COLUMN LIFTS • Challenger’s heavy-duty mobile lifting system are robust, yet easily maneuverable and can be operated on almost any solid surface, indoors or out • Our heavy-duty mobile lifts are also capable of lifting vehicles of any axle length or wheelbase • Mobile lifts provide the flexibility and convenience to lift any rubber-tired vehicle, from small passenger cars to large 2-, 3- or 4-axle vehicles up to 152,000 pounds • Models are available in 14,000 lb. or 19,000 lb. capacity columns MOBILE LIFT 307-01021 (Lowered) 308-00140 87" DRIVE THROUGH CAPACITY The CHLM locks. 307-01021 (Raised) ASCOT NO. MFG. NO. 307-01021 EV1020 DESCRIPTION 10,000 lb. Capacity In Ground Lift ASCOT NO. MFG. NO. 308-00140 308-00190 DESCRIPTION CHLM 140-4 14,000 lb. Capacity Mobile Column Lift CHLM 190-4 19,000 lb. Capacity Mobile Column Lift The CHLM lifting system is conveniently wireless for a clutter-free work area. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT
316 SERVICE EQUIPMENT MR6: 6,000 LB. CAPACITY MID-RISE LIFT • Portable mid-rise lift with Heavy-Duty tow dolly provides flexibility to service vehicles anywhere, inside or out • 7 locking positions allow technician to work at an ergonomic height to increase productivity and minimize fatigue • Electric motor mounted on tow dolly provides convenience and ease of maneuverability • Single push button power unit with release valve provides convenience when lifting and lowering vehicles • Slip-on rubber pad adapter kit with height extension accommodates high profile vehicles • Sliding/rotating arm design accommodates meeting pick-up points on a wider range of vehicles SRM10: 10,000 LB. CAPACITY SHORT-RISE LIFT • Standard with 4 two-position adapter blocks for increased vehicle spotting versatility • Standard storage trays are conveniently placed on each side of the lift to prevent lug nuts and other small parts from being misplaced • Dual cylinders provide stable 10,000 lb. lifting capabilities to accommodate a wide range of vehicles • Floor mounted diamond plated approach ramps help to prevent slipping • 3 locking positions • ALI/ETL certified The portable MR6 is easy to move around from one location to another as needed. PORTABLE AND EASY TO MOVE THREE LOCKING POSITIONS ASCOT NO. MFG. NO. 303-00010 SRM10 307-00006 ASCOT NO. MFG. NO. 307-00006 MR6 DESCRIPTION 6,000 lb. Capacity Mid-Rise Lift DESCRIPTION 10,000 lb. Capacity Short-Rise Lift BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT
SERVICE EQUIPMENT 317 Rubber Blocks & Lift Pads 309-0000 RUBBER LIFT PAD (5" ROUND) • RUBBER PAD DIMENSIONS: 5" round • Kit of four rubber pads • Replacement pads for Nussbaum lifts ASCOT NO. MFG. NO. 309-00003 JOK03M DESCRIPTION Rubber Lift Pad - 5" Round RUBBER JACK PADS FOR TESLA VEHICLES • Lifting jack pads for tesla models • Set of four in convenient carrying c • Protect the vehicle, battery and paint from damage • Can be used with floor jack or 2-post lifts • Top piece fits into designated factory lifting points RUBBER LIFT PAD (4" X 5") • RUBBER PAD DIMENSIONS: 4" x 5" • Kit of four rubber pads • Replacement pads for Ammco, Ben Pearson lifts ASCOT NO. MFG. NO. 309-00005 JOK05M DESCRIPTION Rubber Lift Pad - 4" x 5" 309-00005 RUBBER LIFT PAD (5" X 5") • RUBBER PAD DIMENSIONS: 5" x 5" • Kit of four rubber pads • Replacement pads for Forward, Worth, American, Gemini, Grand, Tuxedo, Eagle, Whip lifts ASCOT NO. MFG. NO. 309-00007 JOK07M DESCRIPTION Rubber Lift Pad - 5" x 5" 309-0000 RUBBER LIFT PAD (4" X 4") • RUBBER PAD DIMENSIONS: 4" x 4" • Kit of four rubber pads • Replacement pads for Challenger CL9 and CL10 lifts ASCOT NO. MFG. NO. 309-00009 JOK09O DESCRIPTION Rubber Lift Pad - 4" x 4" 309-00009 RUBBER LIFT PAD (3.25" X 4") • RUBBER PAD DIMENSIONS: 3.25" x 4" • Kit of four rubber pads • Replacement pads for Rotary SPO10, SPO12 lifts ASCOT NO. MFG. NO. 309-00022 JOK22D DESCRIPTION Rubber Lift Pad - 3.25" x 4" WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE ASCOT NO. MFG. NO. 309-00013 JORB-3 DES Rubber Lift Pad - 4" x 4" RUBBER BLOCK 3" • RUBBER BLOCK DIMENSIONS: 6" x 4" • Kit of four 3" rubber blocks • Spacer blocks for Rotary Airjacks and all Mid-Rise pad lifts 309-00013 RUBBER BLOCK 1.5" • RUBBER BLOCK DIMENSIONS: 6" x 4" • Kit of four 1.5" rubber blocks • Spacer blocks for Rotary Airjacks and all Mid-Rise pad lifts 309-00011 ASCOT NO. MFG. NO. 309-00011 DESCRIP JORB-1 Rubber Block 1.5” ASCOT NO. MFG. NO. DESCRIPTION 309-00404 TJP4 Rubber Jack P Tesla Vehicles - Set of 4 RUBBER LIFT PAD (5.25" ROUND) • RUBBER PAD DIMENSIONS: 5.25" round • Kit of four rubber pads • Replacement pads for Challenger CL10, Quality lifts ASCOT NO. MFG. NO. DESCRIPTION 309-00014 JOK14O Rubber Lift Pad - 5.25" Round 309-00014 SERVICE EQUIPMENT
318 SERVICE EQUIPMENT Rolling Jacks & Work Stations ROLLING JACKS • Optional 6,000 lb. and 7,500 lb. capacity rolling jacks allow easy access to brakes and wheels • Available for the 4P14 Series lifts • Air/ hydraulic operation • Adjustable width • Low vehicle drive-over clearance • Stackable height extensions with built-in storage rack • Factory installed and protected filter lubricator and regular ASCOT NO. MFG. NO. 218-00060 RJ6 309-61275 RJ7.5 DESCRIPTION Air/Hydraulic Operation, 40 Series and AR40 Series Air/Hydraulic Operation, For 4P14 and 4015 series lifts 218-00060 3-TON CAPACITY AIR / HYDRAULIC PUMP OPERATED ROLLING LIFT BRIDGE Used in quick lube pit applications or in conjunction with above ground lifts. The bridge straddles the lift rails and raises the vehicle’s tires off the rails for wheel alignment, brake, tire and suspension work. Push button air/hydraulic pump provides safe, quick lifting up to a height of 20-3/4”. ASCOT NO. MFG. NO. 218-79324 79324G DESCRIPTION 3-Ton Capacity Air / Hydraulic Pump Operated Rolling Lift Bridge 218-79324 AIR ELECTRIC WORK STATIONS • Air and Electric workstation with filter, lubricator and regulator for four post car and truck lifts • Increase productivity with air supply and electric outlets on the four post automotive lift column • Convenient power source for extension lights and other tools needed when servicing cars and trucks ASCOT NO. MFG. NO. 309-10264 B10264 309-99700 B99700 DESCRIPTION Air/Electric with Filter/Lubricator/Regulator for Two Post Lifts 309-10264 Tire Tool Manager Work Station with Filter Lubricator/Regulator INCREASES PRODUCTIVITY BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT
1 Publizr