BRAKE LATHES // SERVICE EQUIPMENT 325 Brake Lathe Accessories 1” ADAPTERS ASCOT NO. MFG. NO. 416-02160 2160 416-03106 3106 416-03107 416-03108 3107 3108 416-03109 3109 416-03110 3110 416-03123 416-03125 3123 3125 416-03178 3178 416-03902 3902 416-03903 3903 416-03904 3904 416-04790 4790 416-09192 9192 416-09193 9193 416-09194 9194 416-09195 9195 416-09196 9196 416-09232 9232 ITEM DESCRIPTION Ford Probe Adapter 1" Centering Cone 1" Centering Cone 1" Centering Cone 1" Hubless Adapter 1" Centering Cone Spring 1" Hubless Adapter 1" Spacer 1" Centering Cone 1" Centering Cone 1" Centering Cone 1" Centering Cone Step-Down Adapter Set 1" Double Taper Adapter 1" Double Taper Adapter 1" Double Taper Adapter 1" Double Taper Adapter 1" Double Taper Adapter 1" Double Taper Adapter Set For 1" Arbors. Slips Into The Hub In Place Of The Bearings Of Rear Probe Drums And Rotors 3.421" x 4.031" (86.89 x 102.39mm) 2.890" x 3.500" (73.41 x 88.90mm) 2.328" x 2.968" (59.13 x 75.39mm) 5.650" (143.52mm) O.D. Presses the Centering Cone into the Center Hole When Mounting a Hubless Drum or Rotor 5.750" (146.05 mm) O.D. 1/2" (12.70mm) long 2.650" x 3.224" (67.31 x 81.89 mm). Fits Many In-Between Center Hole Diameters On Some European Hubless Rotors 1.250" x 1.750" (31.75 x 44.45mm) 1.187" x 2.250" (30.16 x 57.15mm) 1.703" x 2.750" (43.26 x 69.85mm) Permits The Use Of 1-7/8" Adapters On A 1" Arbor. Set Of 3 1.711" x 2.073" (43.46 x 52.65mm) 2.074" x 2.440" (52.68 x 61.98mm) 2.441" x 2.897" (62.00 x 73.58mm) 2.828" x 3.185" (71.83 x 80.90mm) 416-03903 3.203" x 3.560" (81.36 x 90.42mm) For Mounting Automobile And Light Truck Hubbed Drums And Rotors On 1" Arbors. Fits All Bearing Race Diameters From 1.322" To 2.897" (33.58 to 73.58mm). Standard With Lathe 1000, 2002, 3000, 4000, 4100, 7000 and 7700. Consists Of: 9192, 9193, 9194, 9921, 9922 416-09263 9263 416-09265 9625 416-09489 9489 1" Hubless Adapter Three Pad, 4.500" (114.30 mm) OD. Used On Outside Of Drums & Rotors For Stable Mounting 1" Hubless Adapter Five Pad, 5.625" (142.88 mm) OD. Used On Outside Of Drums & Rotors For Stable Mounting 1" Hubless Adapter For Mounting Smaller Hubless Drums And Rotors. Permits Boring Bar And Tool Bit Clearance Inside Small Diameter Drums. 3.625" (92.08 mm) O.D. Standard With Models 1000, 2002, 3000, 4000, 4100, 7000 and 7700 41609490 9490 1" Hubless Adapter For Mounting Corvette Rear Rotors, Some Eldorado/Toronado Front Rotors And Import Hubless Rotors. 4.500" (114.30 mm) OD. Standard With Models 1000, 2002, 3000, 4000, 4100, 7000 and 7700 416-09921 9921 1" Double Taper Adapter 416-09922 9922 1" Double Taper Adapter 1.322" x 1.670" (33.58 x 42.42 mm). Needed On Older Lathes. Smaller Size Allows Accurate Mounting Of Current Smaller Rotors 1.362" x 1.710" (34.59 x 43.43mm) 416-09921 416-09922 416-09263 416-09265 416-09192 416-03178 416-03902 416-03123 416-03125 416-02160 416-03106 416-03109 416-03110 416-09195 416-09232 416-09489 416-09490 ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT // BRAKE LATHES
328 Publizr Home