322 SERVICE EQUIPMENT // BRAKE LATHES Brake Lathe Accessories Brake Lathe Accessories & Adapters (cont.) BRAKE LATHE PARTS ASCOT NO. 416-03085 MFG. NO. 3085 ITEM Spindle Boot DESCRIPTION Replaces Front/Rear Spindle Boots on 3000/4000 Spindle Boot Lathes. Damaged Boots Should be Replaced to Protect the Spindle and Bearings From Metal Chips and Grinding Dust. Replaces Discontinued Spindle Boot 10401 on Models 4100 and 7700 416-03086 416-03087 416-03148 416-04282 3086 3087 3148 4282 Feed Screw Boot Oil Level Stick Bearing Protector Used on Lathes 3000, 4000 and 7000 Cross Feed Boot Used on Lathes 3000, 4000, 4100, 7000, 7700 Standard on Lathes 3000, 4000, 4100, 7000, 7700 Mounts Between the Lathe and the Drum or Rotor, on the Arbor, to Keep Chips and Grinding Dust Out of the Hub. Fits any Arbor up to 2.25" (57.15mm) 416-06936 6936 Cross Feed Extension 416-07996 7996 Shear Gear and C-Clip 416-09590 416-23682 417-02760 417-02761 417-02780 9590 23682 2760 2760-50 2780 To Relocate the No. 6900 Twin Cutter on 4000 & 4100 Lathes to Accommodate Rotor Diameters up to 17-15/16" (455.61mm) Replacement for the “Fail Safe" Gear. Protects Cross Feed Gear Box in the Event of Operator Error during Rotor Machining Spindle Lock Kit Parts Needed to Easily Add a Spindle Lock to an Older Drum/Disc Lathe that Does Have this Feature Spindle Ring Mechanical Rotor Micrometer Mechanical Metric Rotor Micrometer Digital Rotor Micrometer For Replacing a Rubber Boot on the Front of the Spindle in Order to Mount the Boot to the Spindle Range: 0 to 2.25". English & Metric Display Range: 0 to 60.9mm. English & Metric Display Deep Throat Design Allows Measurement Within Rotor Brake Surfaces. For Checking Rotor Wear, Thickness Variation, and Depth of Scoring. For All Automotive and Truck Applications. Range: 0 to 2.4" 417-02781 417-08500 9K85452780 8500 Digital Rotor Micrometer Brake Drum Micrometer 417-08501 417-08539 417-08545 417-09582 417-85391 417-94127 8500-50 8539 8545 9582 8539-50 941270 Metric Brake Drum Micrometer Micrometer Extension Shaft Digital Drum Micrometer Micrometer Extension Shaft Three Jaw Chuck Range 0"-2.4" Measures Drum Diameters On or Off the Lathe. Can be Used to Check Out-of-Roundness. Dial is Graduated by 0.005". Range: 6" to 16.125" Graduated By 0.1mm. Range: 154mm to 406mm Increases 8500 Micrometer Range to 6" to 26" Range 5"-15". Stands up in Drum Checking Gauge For Brake Drums Increases 8500-50 Micrometer Range From 152.44mm to 660.40mm Heavy Duty Three Jaw Chuck for 1-7/8" Arbor 417-08545 416-02780 417-94127 416-09590 416-06936 416-03148 416-04282 416-07996 416-03085 416-03086 416-03087 BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION SERVICE EQUIPMENT // BRAKE LATHES
325 Publizr Home