AIR TOOLS Impact Wrenches Sanders & Blue Tork Air Ratchets Buffers & Grinders Air Drills Air Tools & Accessories Impact Wrenches Hammers, Grinders & Drills Air Tool Lubricants & Conditioners Accessories & Work Stations Cordless Tools
43 AIR TOOLS IMPACT WRENCHES 1/2" DRIVE IMPACT WRENCH • Twin hammer impact mechanism • Gasket: Concave edge on both TPE gasket and motor housing • Rotor: CM415 + heat-treatment HRC54 – 56 • Front/ Rear end plate: Aluminum material • Back screws: HEX head with dri-lock • Clutch housing: One rib & Aluminum material • Embossed design on motor housing for better fall protection • Handle & Inlet: Composite housing & 360° air Inlet with two retention pins ASCOT NO. 153-07741 153-77412 MFG. NO. CP7741 CP7741-2 DESCRIPTION 1/2" Drive Impact Wrench 1/2" Drive Impact Wrench Extended Anvil 3/8" HEAVY DUTY AIR IMPACT WRENCH • The most powerful 3/8" of its class for general maintenance • Maximize operator comfort with an extremely light and well balanced design • Most convenient and unique reverse technology in the market • ULTIMATE TORQUE: 415 ft./lb. ASCOT NO. 152-07729 MFG. NO. CP7729 DESCRIPTION 3/8" Heavy Duty Air Impact Wrench ASCOT NO. 153-07748 153-77482 MFG. NO. CP7748 CP7748-2 DESCRIPTION 1/2" Super Duty Air Impact Wrench-Tire Tool 2" Extended Anvil 1/2" DRIVE STUBBY IMPACT WRENCH • BEST POWER TO WEIGHT RATIO: 450 ft./lb. (610 Nm) • Ultra compact and easy to use • Durable with a steel front cover and aluminum body • One hand operation forward - reverse by either left or righthanded users • 3 setting positions • Jumbo hammer 1/2" HEAVY DUTY AIR IMPACT WRENCH • One hand push button forward/reverse power regulator • 4 positive power setting • Ultimate power in reverse • Differential regulator allows the operator to match the required power to the job • Patented oil bath Dyna-Pact clutch delivers smooth operation and extended durability • Handle exhaust with 360º air inlet swivel to prevent kinks • Power and economy for general repair, transmission work, exhaust systems and body shops • ULTIMATE TORQUE: 425 ft./lb. ASCOT NO. MFG. NO. 153-00734 CP734H DESCRIPTION 1/2" Impact Wrench ASCOT NO. 153-07732 MFG. NO. CP7732 DESCRIPTION 1/2" Drive Stubby Impact Wrench The 1/2" Drive Stubby Impact Wrench in use. The 1/2" Super Duty Air Impact WrenchTire Tool in use. 1/2" SUPER DUTY AIR IMPACT WRENCH-TIRE TOOL • 960 ft./lb. of torque (1,300 Nm) • Hard anodized end plates • Hard chromium aluminum c • Twin hammer mechanism • Ligh due to the Composite mo • COMPACT: Only 6.6" long • Curved handle with rubber material resistant to most chemicals used in w • Full teasing trigger • 360° s inlet • Friction ring sock 153-77412 153-07732
AIR TOOLS IMPACT 3/4" HEAVY DUTY AIR IMPACT WRENCH • Smoothest operating 3/4" impact on the market • One hand push button forward/reverse power regulator • Handle exhaust with 360˚ air inlet swivel • APPLICATIONS: spring work, truck and bus maintenance, farm machines & construction equipment • ULTIMATE TORQUE: 1,000 ft./lb. WRENCHES 1" HEAVY DUTY AIR IMPACT WRENCH • Chicago Pneumatic's strongest and most powerful 1" Impact Wrench • Operator productivity • Convenient reverse valve • Ideal for high volume tire work on trucks, buses, and heavy equipment • 1" impact wrench with 7" extended anvil • Rocking dog clutch • 4-position power settings throttle for ease of use 44 154-01772 CP772H-6 /" Impac 6" Extended Anvil ASCOT NO. 155-50000 3/4" HEAVY DUTY AIR IMPACT WRENCH • Reduced Length at only 7.9" • All controls within reach • Variable speed trigger • One-hand power adjustment • One-hand reverse system • 1440 ft./lb. (1950 Nm) of maximum torque • Composite motor housing • Twin hammer mechanism • 360° swivel air inlet • Sockt retainer ring c MFG. NO. CP5000 DESCRIPTION 7" Extended Anvil 1" SUPER DUTY AIR IMPACT WRENCH • 14.5 lb. (6.6 kg) • Twin hammer mechanism • Steel motor • Intuitive forward/ reverse lever & power regulator on both sides • 4-position power settings on both sides • Side handle with soft touch grip • Down exhaust • Aluminum housing • Composite cover on the clutch housing • Socket retainer ring • 1300 ft./lb. (1760 Nm) maximum torque in reverse ASCOT NO 154-077 154-776 ASCOT NO. 155-07773 155-77736 MFG. NO. CP7773D CP7773D-6 DESCRIPTION 1" Short Shank 6" Extended Anvil 3/4" SUPER DUTY AIR IMPACT WRENCH - "D" HANDLE • LIGHTWEIGHT: 3/4" at only 14.3 lb. • 1300 ft./lb. (1760 Nm maximum torque in reverse) • Twin hammer mechanism • Steel motor • Intuitive Forward/ Reverse lever & power regulator on both sides • 4-position power settings on both sides • Side handle with soft-touch grip • Down exhaust • Aluminum housing • Composit er on the clut 1" HEAVY DUTY AIR IMPACT WRENCH • High performance clutch provides longer life under tough conditions • High-efficiency 6 vane motor for maximum performance • Bottom exhaust directs exhaust away from the operator • Three-position power regulator with directional control • ULTIMATE TORQUE: 1,620 ft./lb. ASCOT NO. 154-27763 154-37763 MFG. NO. CP7763D CP7763D-6 DESCRIPTION 1" Short Shank 6" Extended Anvil 155-07778 155-77786 155-27786 CP7778 CP7778-6 CP7778SP-6 1" Short Shank 6" Extended Anvil #5 Spline with 6" Extended Anvil
45 AIR TOOLS IMPACT WRENCHES FULL TEASING TRIGGER 1" HEAVY DUTY AIR IMPACT WRENCH • 2140 ft./lb. (2900 Nm) of maximum torque in reverse • Pinless closed reinforced rocking dog impact mechanism • Socket retainer ring combined with hole retainer • Ergonomic side handle • Full teasing trigger • Regulator with integrated forward/reverse with • 3-position power settings in both directions ASCOT NO. MFG. NO. 155-0778 155-7782 155-17782 DESCRIPTION 1" HEAV IMPACT WRENCH 1" HEAVY DUTY AIR IMPACT WRENCH • High Operator Comfort-Ergonomic D-Handle with full teasing trigger • HIGH DURABILITY: Pinless closed reinforced rocking dog mechanism in oil bath • SHOCK ABSORBING: Rubber bumper protecting both applications and tool (included) • POWERFUL AND LIGHT: 1770 ft./lb. (2400 Nm) in reverse D-HANDLE FOR COMFORT • LIGHTWEIGHT to a composit operator com with hole re • ALL CONTR speed trigger One-hand r inlet • 1440 ft./lb RUBBER BUMPER ASCOT NO 155-07779 155-17779 155-07783 1" SUPER DUT IMPACT WRENCH • Rocking dog clutch for smooth operation and extreme durability • Teasing throttle for easy bolt starting • Convenient reverse valve for easy directional changes • Choice of professional mechanics for high volume tire work on trucks, buses and heavy equipment • ULTIMATE TORQUE: 1,400 ft./lb. ASCOT NO. 155-07783 155-77836 MFG. NO. CP7783 CP7783-6 DESCRIPTION 1" Short Shank 6" Extended Anvil ASCOT NO. 155-07971 155-07976 156-79716 MFG. NO. CP797 CP797-6 CP797SP-6 DESCRIPTION 1" Short Shank 6" Extended Shank 6" Extended Shank and #5 Spline 155-07976
AIR TOOLS SANDERS & BLUE TORK HEAVY DUTY HIGHSPEED SANDER • Built-in regulator and variable speed throttle for precise speed control • Rugged, energy efficien 1/2 HP motor • APPLICATIONS: Ideal for small jobs or hard to reach spots including paint removal, shaping filler patches, smoothing and rust removal • FREE SPEED: 14,000 RPM ASCOT NO. 158-00778 MFG. NO. CP9778 DESCRIPTION Heavy Duty High-Speed Sander MINI DISC SANDER KIT • KIT INCLUDES: CP7202 Mini Disc Sander plus (1) 3" backing pad, (10) 3" 80, 100 & 120 grit sanding discs, (1) 3" fine, medium and coarse surface prep disc & a spindle wrench packed in a heavy duty carrying case • FREE SPEED: 15,000 RPM 158-07202 ASCOT NO. 158-07202 MFG. NO. CP7202D DESCRIPTION Mini Disc Sander Kit 46 1 " NON-IMPACT WRENCH (BLUE TORK) • Two pneumatic motors for rundown and final tightening • Preset and adjustable shut off for torque control • Quality: Precise, accurate tightening to the manufacturer’s recommended torque and angle specifications • Environment Improvements: by increasing durability of the tools, we reduce waste • ERGONOMICS: very low noise level, virtually no vibration • EFFICIENCY: Precise and accurate tightening, les fatigued operators • Maximum Torque: 660 ft./lb ASCOT NO. 168-07600 168-07602 168-07603 MFG. NO. CP7600xB CP7600xB-R CP7600xB-R4P DESCRIP Non-R Torque Pr Rever Torque Pr Reversible 4 Torque Preset Selector TWO PNEUMATIC MOTORS LOW NOISE FRL UNIT FOR BLUE TORK • INCLUDES: Industrial grade filter; Regulator; Single point lubricator; 25' hose with capillary tube; 1 Quart of special tool oil approved for the Blue Tork 117-58625 ASCOT NO. 117-58625 MFG. NO. 586-254-1000 DESCRIPTION FRL Unit for Blue Tork
47 AIR TOOLS AIR RATCHETS 1/4" SUPER DUTY AIR RATCHET • Exceptional durability with an advanced head design that virtually eliminates slippage • Urethane grip for comfort and control • Faster rundown with 250 RPM • APPLICATIONS: Under-dashboard work, small engine repair and body shops • ULTIMATE TORQUE: 15 ft./lb. ASCOT NO. 151-00826 MFG. NO. CP826 DESCRIPTION 1/4" Super Duty Air Ra 3/8" HEAVY DUTY AIR RATCHET • Advanced motor, full caged gear, and head design • Only 10.7in / 272mm long • Better access to restricted areas • 2.7 lb. / 1.2 kg • Adjustable side exhaust avoids blowing dirt and dust • Ergonomic composite grip insulates operator’s hand from cold • Designed for a variety of applications from heavy ones such as transmission and suspension work to light ones such as engine repair, dashboard work and general maintenance • ULTIMATE TORQUE: 70 ft./lb. 3/8" QUIET AIR RATCHET • APPLICATIONS: exhaust systems, small engines, water and fuel pumps and radiator and air conditioner removal and replacement • New advanced, patented head design • Paten ergonomic square-handle design for a comfortable grip • Efficient 1/2 HP motor and triple idler plane gear system • ULTIMATE TORQUE: 50 ft./lb. RUBBER BUMPER ASCOT NO. 152-00828 153-08281 MFG. NO. CP828 CP828H DESCRIPTION 3/8" Quiet Air Ra 1/2" Quiet Air Ra 152-00828 3/8" EXTREME DUTY AIR RATCHET • Adjustable side exhaust • LOW NOISE LEVEL: Only 79 dBA • One of the highest torques available on the market • CP’s Patented TriSpring anti-slip head design ASCOT NO. 152-07830 153-07830 MFG. NO. CP7830Q CP7830HQ DESCRIPTION 3/8" Super Duty Ratchet 1/2" Super Duty Ratchet ASCOT NO. 152-07829 153-07829 MFG. NO. CP7829 CP7829H DESCRIPTION 3/8" Heavy Duty Air Ratchet 1/2" Heavy Duty Air Ratchet The 3/8" Air Ratchet in use. QUICK REFERENCE CHART CP No. Ascot No. CP826 CP828 CP7829 CP7830Q 151-00826 151-00828 152-07829 152-07830 Sq. Drive (mm) 1/4" (6) 3/8" (10) 3/8" (10) 3/8" (10) Std Bolt Size (mm) 1/4" (6) 3/8" (10) 3/8" (10) 3/8" (10) Net Wt. (kg) 1.13 (0.51) 2-5/8 (1.2) 1.235 (2.72) 2.7 (1.2) Avg Air Cons. (CFM) 3.5 4 4 5 (142) Air Inlet (in.) 1/4" 1/4" 1/4" 1/4" Min. Hose Size (in.) 3/8" (10) 3/8" (10) 3/8" (10) 3/8" (10) Working Torque (ft./lbs.) 5-15 (7-20) 10-50 (14-68) 10-55 (15-68) 10-90 (14-136) Max Torque (ft./lbs.) 15 (20) 50 (68) 150 RPM 95 (70) 90 (122)
AIR TOOLS NEEDLE SCALER, CUTTER, TIRE BUFFERS NEEDLE SCALER • Ideal for surface preparation work • Adjustable sleeve allows needle clearanc based on the application • 19 1/8" steel needles with high resistance to wear • Easily converts to a weld flux chipping hammer • BLOWS PER MINUTE: 4,800 HIGH SPEED TIRE BUFFER KIT • Jacobs chuck for holding buffing ac • Lock-off throttle • APPLIC tire patchwork, roughing ar recapping and cleaning tir • FREE SPEED: 22,000 RPM 48 ASCOT NO. 157-07120 MFG. NO. CP7120 DESCRIPTION Needle Scaler ASCOT NO. 158-00871 158-01871 HIGH SPEED CUTTER • Adjustable speed r • Lock off thr start up • Rear e air away from w • MAX RPM: 22, COMPOSITE LOW SPEED TIRE BUFFER • Quick Change slip chuck for fast and easy ASCOT NO. 157-00874 173-00101 MFG. NO. DESCRIPTION CP874 CW1 change of buffing wheel • Adjustable speed regulator for precise control • Lock off throttle to prevent accidental start ups • Rear exhaust directs air away from work area • 3,000 RPM High Speed Cutter Cut-Off Wheel ASCOT NO. 158-03873 MFG. NO. CP873C DESCRIPTION Low Speed Tire Buffer 158-03873 MFG. NO. CP871K CP871 DESCRIPTION Includes Over Hose High Speed Tire Buffer Only CORDLESS TIRE BUFFER • Boost your tire repair efficiency with the Chicago Pneumatic CP83 Perfect for both shop and road use, it features 2 speed settings, a quick integrated LED lighting for enhanced visibility • The cordless design off eliminating hose hassles • Weighing 20% less than previous models, it r improves handling • Enjoy eco-friendly operation with no emissions c tools • Compact and lightweight at 1.16 kg and 306 mm in length, it's eas ASCOT NO. 158-13873 158-08323 MFG. NO. CP873KNA CP8323 DESCRIPTION Cordless Tire Buffer Kit Cordless Tire Buffer (Tool Only)
49 AIR TOOLS GRINDERS & SURFACE CONDITIONING DISCS GREEN ZIRCONIA DISCS • Twist-to-lock backing • Offers longer life and more aggressive results than zirconia or aluminum oxide • Flexible discs resist chipping, snagging and cracking • For use on air grinders and are compatible with all 3M style, Type “R” backing pads • Especially good on extra hard metals • 20,000 RPM • 25 per box ASCOT NO. MFG. NO. DESCRIPTION 417-12612 417-12613 417-12614 417-12615 417-12617 417-12618 417-12619 12612 12613 12614 12615 12617 12618 12619 2" SURFACE CONDITIONING DISCS • Best used on aluminum parts • USA MADE • QUANTITY: 25 per box • MAXIMUM OPERATING SPEED: 25,000 ASCOT NO. MFG. NO. 417-13003 417-13004 417-13005 620TE-1 622TE-1 2" Disc, 24 Grit (25 per box) 2" Disc, 36 Grit (25 per box) 2" Disc, 50 Grit (25 per box) 2" Disc, 80 Grit (25 per box) 3" Disc, 36 Grit (25 per box) 3" Disc, 50 Grit (25 per box) 3" Disc, 80 Grit (25 per box) 2" QUICK CHANGE SURFACE CONDITIONING DISCS • Embedded with abrasive grain to eliminate fraying of edges, resist loading and provide a consistent finish • Ideal for flat or contoured surfaces • APPLICATIONS: Light deburring, surface preparation, blending scratches, removing rust, corrosion and oxidation, removing stains from stainless steel, finishing aluminum and stainless steel • Available in fine, medium or coarse 417-39120 417-39121 417-39122 MADE IN THE USA 417-13004 DESCRIPTION 2" Conditioning Discs: Brown (Coarse) 2" Conditioning Discs: Maroon (Medium) 620TE-1-50 2" Conditioning Discs: Brown (Coarse) MINI ANGLE DIE GRINDER • Compact, lightweight design for easy maneuv • 90˚ angle head allows flexibility in confined areas • Complete with 1/4" and 6mm collet • APPLICATIONS: high speed blending, smoothing, porting, and deburring in confined areas • MAX RPM: 22,500 ASCOT NO. 157-00875 MFG. NO. CP875 MINI DIE GRINDER • Compact, lightweight design for easy maneuverability • Adjustable speed regula for precise control • Complete with 1/4" and 6mm collet • APPLICATIONS: high speed blending, smoothing, porting, and deburring in confined areas • MAX RPM: 30,000 ASCOT NO. 157-00876 MFG. NO. CP876 DESCRIPTION Mini Die Grinder DESCRIPTION Mini Angle Die Grinder 417-13003, 417-13005 QTY./BOX 25 25 50 417-39202 ASCOT NO. MFG. NO. 417-39120 417-39121 417-39122 417-39202 417-39203 DESCRIPTION 3912BLUEF 2" Quick Change Surface Conditioning Discs: Blue (Fine) 3912MARNM 2" Quick Change Surface Conditioning Discs: Maroon (Medium) 3912BRWNC 2" Quick Change Surface Conditioning Discs: Brown (Coarse) 392002 13013 STRIP-BRITE PADS • Used for paint or coating removal • Features the quick and easy twist-to-lock attachment system • Open-web construction impregnated with silicon carbide to provide aggressive and long-lasting performance • Three-dimensional web has a soft edge, allowing it to remove paint and other coatings in those unreachable creases and dents while removing very little metal • Ideal for stripping paint without damaging metal, especially on aluminum • QUANTITY: 10 per Box ASCOT NO. 417-16210 417-16211 MFG. NO. DESCRIPTION 16210 16211 Backing Pad for 2" Surface Conditioning Discs Backing Pad for 3” Surface Conditioning Discs 417-16210 Purple 2" Strip-Brite Pad Purple 3" Strip-Brite Pad
AIR TOOLS PROFESSIONAL STUD/HUB BRUSH KIT • Ideal for hub and stud cleaning job with ease • QUICK AND EASY: Change brushes in seconds • Includes a 1/2" drive adapter • Powered by a cordless drill • Replacement brushes available GRINDERS & SURFACE CONDITIONING DISCS 3M SCOTCH BRITE ROLOC SURFACE CONDITIONING DISCS • Used to quickly remove cut cork or paper gaskets and form-in-place gasket materials prior to the assembling of power train components, engine blocks, heads, and valve covers • Quick 1/2 turn on, 1/2 turn off Roloc disc fastening system • Best used on steel parts • 25 per box 50 417-07481 417-07485 402-32610 Ascot No. 402-32615 402-32613 ASCOT NO. MFG. NO. 402-32610 ASCOT NO. 402-32613 402-32615 402-32616 DESCRIPTION 203610-ASC Stud/Hub Brush Kit 417-07486 MFG. NO. 203613-ASC 203615-ASC 203616-ASC DESCRIPTION REPLACEMENT COMPONENTS FOR STUD/HUB BRUSH KIT 4-Pack of Replacement 14mm Stud Brushes 4-Pack of Replacement Passenger Hub Brushes 4-Pack of Replacement Truck Hub Brushes RPG 1/4" MINI ANGLE DIE GRINDER • Compact, lightweight design for easy use • APPLICATIONS: High speed blending, smoothing, porting and deburring in confined areas • Right angle for easy maneuvering • FREE SPEED: 22,000 RPM 157-10875 3M 2” GREEN CORPS ROLOC SURFACE CONDITIONING DISCS • Small diameter sizes allow for grinding in hard-to-reach places • Tough, coarse aluminum oxide abrasive stays sharper longer • Versatile Roloc attachment system works with any 1/4 drill or air tool • Allows for quick twist-on, twist-off disc changes for lower labor costs • Color coded to disc grades for faster, more accurate use • 25 per box ASCOT NO. 417-36525 ASCOT NO. MFG. NO. 157-10875 A875 DESCRIPTION 417-36526 RPG 1/4" Mini Angle Die Grinder 417-36527 36526 36527 MFG. NO. 36525 DESCRIPTION 3M 2” Green Corps Roloc Surface Conditioning Discs - 40-Grit - 25 per Box 3M 2” Green Corps Roloc Surface Conditioning Discs - 60-Grit - 25 per Box 3M 2” Green Corps Roloc Surface Conditioning Discs - 80-Grit - 25 per Box 7486 417-07480 417-07481 417-07485 Mfg. No. 7480 7481 7485 Description 3M 2” Scotch Brite Roloc Surface Conditioning Discs - Coarse/Brown - 25 per Box 3M 2” Scotch Brite Roloc Surface Conditioning Discs - Medium/Maroon - 25 per Box 3M 3” Scotch Brite Roloc Surface Conditioning Discs - Coarse/Brown - 25 per Box 3M 3” Scotch Brite Roloc Surface Conditioning Discs - Medium/Maroon - 25 per Box 417-36526
51 AIR TOOLS DRILLS, HAMMERS & ACCESSORIES 1/4" REVERSIBLE MINI AIR DRILL • Composite housing with thermoplastic rubber handle grip • Wings on right & left sides to guide the forefinger • Large teasing trigger and progressive valve allowing more c to start holes • Low speed gear bo part for better pushing action while drilling and tapping • Reverse lever on the t easier access • Handle exhaust allo air to flow away from the opera with high quality industrial Jacobs® chuck for longer use • keyed Metal • APPLIC Excellent for drilling, honing, reaming and hole sawing • FREE SPEED: 3,300 RPM ASCOT NO. 157-07302 MFG. NO. CP7300RC DES 1/4" Reversible Mini Air Drill 1/4" MINI AIR DRILL • Composite housing with thermoplastic rubber handle grip • Wings on right & left sides to guide the forefinger • Large teasing trigger and progressive valve allowing more con start holes • Low speed gear box • Fla part for better pushing action while drilling and tapping • Handle exhaust allowing the air to flow away from the operator • Supplied with high quality industrial Jacobs® chuck for longer use • keyed Metal • APPLIC Excellent for drilling, honing, reaming and hole sawing • FREE SPEED: 3,300 RPM ASCOT NO. 157-17302 MFG. NO. CP7300C DESCRIP 1/4" Mini Air Drill 3/8" REVERSIBLE DRILL • Teasing throttle for precise c • APPLICATIONS: Screwdriving, honing and heav drilling • FREE SPEED: 2,600 RPM ASCOT NO. 157-78926 MFG. NO. CP789-R26 DES 3 3/8" REVERSIBLE ANGLE DRILL • Composite housing with thermoplastic rubber handle grip • Lock-off throttle for more controlled applications • Built-in Forward–Reverse ring • Compact low profile head to get into confined spaces • Handle exhaust allowing the air to flow away from the operator• Supplied with high quality industrial Jacobs® chucks for longer use • APPLICATIONS: Excellent for drilling and screw driving in confined areas • FREE SPEED: 2,000 RPM ASCOT NO. 157-01879 MFG. NO. CP879C DESCRIPTION 3/8" Reversible Drill 157-17302 1/2" REVERSIBLE DRILL • Teasing throttle for precise c • APPLICATIONS: heavy drilling, r hole sawing and jobs requiring a lo of torque • FREE SPEED: 500 RPM ASCOT NO. 157-00789 1 2 INDEX NO. 1 2 3 4 5 3 4 ASCOT NO. 171-47050 171-47051 171-47052 171-47057 171-47059 171-47061 5 6 MFG. NO. A-047050 A-047051 A-047052 A-047057 A-047059 A-047061 7 8 9 DESCRIPTION Rivet Cutter Wide Cutting Chisel Bushing Splitter U-Joint & Tie Rod Tool 1" Separator Fork 1-1/4" Separator Fork 10 11 12 MFG. NO. CP789-HR HAMMER ACCESSORIES INDEX NO. 6 7 8 9 10 11 ASCOT NO. 171-47071 171-47073 171-47074 171-47078 171-47091 171-47095 MFG. NO. A-047071 A-047073 A-047074 A-047078 A-047091 A-047095 DESCRIPTION Twin Blade Cutter Cold Chisel Straight Punch Tapered Punch 1-1/4" Smoothing Hammer Quick-Change Retainer
AIR TOOLS 52
53 AIR TOOLS ASCOT IMPACT WRENCHES 1/2" DRIVE SUPER DUTY AIR IMPACT WRENCH • 2" extended anvil • Free speed: 8,000 RPM • Maximum torque: 600 ft./lb. • Powered by the durable and high performing twin hammer mechanism • Proven design and the most popular configuration in the tire service industry • Handle exhaust • Made in Taiwan 1/2" DRIVE COMPOSITE IMPACT WRENCH W/ EXTENDED ANVIL • Convenient one-hand operated forward/reverse push button • Four-setting torque adjustment switch • Compact with a total length of only 7.2" • Twin hammer mechanism provides smooth balance • Feather trigger for precise speed control • Energy efficient motor for maximum performance & long life • Swivel air inlet prevents hose from twisting • Made in Taiwan 153-23120 153-12260 175-43104 PUSH BUTTON ASCOT NO. MFG. NO. 175-43104 JB-04 DESCRIPTION Burgundy Protective Boot for Various 1/2" Drive Impact Wrenches IMPACT WRENCH SPECIFICATIONS ASCOT NO. 153-12260 153-23120 MFG. NO. A2131-2COMP A2312-2 SQUARE DRIVE 1/2" 1/2" FREE SPEED (RPM) 7,500 8,000 MAX TORQUE (FT./LB.) 685 600 AIR PRESSURE (PSI) 90 90 AIR CON. AVG (CFM) 5 4 AIR INLET (NPT) 1/4" 1/4" HOSE SIZE 3/8" 3/8" LENGTH 7.2" 8-1/8" WEIGHT (LB.) 4.5 5.6 FOR ONE-HAND OPERATION
AIR TOOLS ASCOT IMPACT WRENCHES ASCOT 1" DRIVE MINI PLUS AIR IMPACT WRENCH • 6" extended anvil • 3-position power setting • Rubber-coated side handle for added comfort • Powered by the twin hammer clutch • FREE SPEED: 5,000 RPM • MAXIMUM TORQUE: 2,000 ft./lb. 155-26464 54 RPG 1" DRIVE DUTY AIR IMPACT WRENCH • 6" extended anvil • Steel end plates • WORKING TORQUE RANGE: 1,600-1,800 ft./lb. • FREE SPEED: 4,500 RPM • MAXIMUM TORQUE: 1,800 ft./lb. 155-17786 RPG 1" SUPER DUTY IMPACT WRENCH • 6" extended anvil • 3-position forward and reverse • High efficiency 6-vane motor • Swoop-back side handle for maneuverability and balance • Pinless clutch mechanism • WORKING TORQUE RANGE: 1,800-2,000 ft./lb. • FREE SPEED: 5,000 RPM • MAXIMUM TORQUE: 2,000 ft./lb. IMPACT WRENCH SPECIFICATIONS ASCOT NO. 155-26464 155-12856 155-17786 MFG. NO. A26464 A2856 A778-6 SQUARE DRIVE 1" 1" 1" FREE SPEED (RPM) 5,000 5,000 4,500 MAX TORQUE (FT./LB.) 2,000 2,000 1,800 AIR PRESSURE (PSI) 90 — 90 AIR CON. AVG (CFM) 9 12 8.4 AIR INLET (NPT) 1/2" 1/2" 1/2" HOSE SIZE 1/2" 1/2" 1/2" LENGTH 19.2" 20.5" 20.3" WEIGHT (LB.) 17.86 27.6 26.59
55 AIR TOOLS TIRE BUFFERS & ACCESSORIES ASCOT LOW SPEED TIRE BUFFER WITH QUICK CHANGE SLIP CHUCK • Brass bushings provide performance and durability in tough working conditions • Includes whip hose and exhaust hose • Quick change slip chuck for fast and easy change of buffing wheel • Built-in regulator • Lock off throttle to prevent accidental start ups • Rear exhaust directs air away from the work area • Ideal for patchwork, roughing areas for recapping and cleaning tire moldings • Overhose Kit also Available Separately (175-00873) 158-10873 158-11873 ASCOT COMPOSITE LOW SPEED TIRE BUFFER W/ QUICK CHANGE SLIP CHUCK • Needle bearings provide performance and durability in tough working conditions • Includes exhaust hose • Quick change slip chuck for fast and easy change of buffing wheel • Lock off throttle to prevent accidental start ups • Built-in regulator • Rear exhaust directs air away from work area • Ideal for patchwork, roughing areas for recapping and cleaning tire moldings • Composite body ASCOT HIGH SPEED TIRE BUFFER WITH OVERHOSE KIT ASCOT HIGH SPEED BUFFER KIT WITH QUICK CHANGE CHUCK • Jacobs chuck for holding buffing accessories • Lock-off throttle • Free speed: 22,000 RPM • Applications: Tire patchwork, roughing areas for recapping and cleaning tire moldings • Includes overhose kit • Quick change chuck for holding buffing accessories • Lock-off throttle • Free speed: 22,000 RPM • Applications: Tire patchwork, roughing areas for recapping and cleaning tire moldings • Includes overhose kit 158-10871 158-11871 TIRE BUFFER SPECIFICATIONS Ascot No. Mfg. No. Description 158-10873 158-10871 158-11871 158-11873 A873K A871K A871K-QC Low Speed Tire Buffer with Quick Change Chuck High Speed Tire Buffer with Overhose Kit High Speed Buffer Kit with Quick Change Chuck A873CK Composite Low Speed Tire Buffer w/ Quick Change Slip Chuck Free Speed (RPM) 2,800 22,000 22,000 2,800 Length 1.75" 2.5" 1.75" 1.75"
AIR TOOLS TIRE BUFFERS & ACCESSORIES QUICK CHUCK ADAPTER, EXTRA LONG • Quick change extra-long adapter 3/8”-24 thread • Two flat washers, two nuts included • 1-3/4” (45mm) thread length • For rasps, buffing wheels and brushes where extra length is required ASCOT NO. 173-00024 MFG. NO. DESCRIPTION 173-00024 AS-1047XL Quick Chuck Adapter, Extra Long QUICK CHUCK ADAPTER, LONG • Quick change long adapter 3/8” • One flat washer, one nut included • 1” (25mm) thread length 173-00025 ASCOT NO. 173-00025 MFG. NO. AS-1047 DESCRIPTION Quick Chuck Adapter, Long REPLACEMENT PARTS & ACCESSORIES ASCOT NO. 173-00027 MFG. NO. DESCRIPTION AS-1041-3/8 Quick Change Adapter For 3/8" Burrs DUAL HEAD QUICK CHUCK ADAPTER • Quick change extra-long adapter 3/8”-24 thread • Two flat washers, two adapters included • 1-3/4” (45mm) thread length • For rasps, buffing wheels and brushes where extra length is required ASCOT NO. 173-00026 MFG. NO. AS-1046D DESCRIPTION Dual Head Quick Chuck Adapter QUICK CHANGE ADAPTER FOR 3/8" BURRS • Quick release adapter for 3/8” shank • For use with 10mm carbide cutters and quick release couplers • Two allen screws to ensure tight fit • Allen wrench included 173-00027 173-00026 56 173-91650 173-92010 173-94000 175-00873 ASCOT NO. MFG. NO. 175-00873 175-18713 175-28713 173-00018 173-00019 173-00020 173-00022 173-00023 175-18713 DESCRIPTION REPLACEMENT PARTS FOR AIR BUFFERS A-873K-OH Overhose Kit for Tire Buffers A8713-TA SQC01 Replacement 7/16" Quick Change Slip Chuck ACCESSORIES FOR AIR BUFFERS QC18 QC19 QC20 QC22 QC23 Quick Chuck Adapter W/ Collar Quick Chuck Adapter W/ Spacer, 1" x 3/8" Thread Quick Chuck Adapter For 1/8" Shank Quick Chuck Adapter For 1/4" Shank Quick Chuck Adapter For 5/16" Shank 173-92120 173-94000 173-91650 173-92010 ASC-9212 173-92020 Trigger Assembly for Tire Buffers 173-92120 QUICK CHANGE ADAPTERS & ACCESSORIES Mfg. No. Ascot No. 173-92020 Description ASC-9202 Equivalent: Jacob Chuck adaptor 2-3/4” x 3/8” – 24 Equivalent: Quick Change Adaptor 2-1/4” x 3/8” – 24 ASC-9400 Rear Exhaust Hose Kit ASC-9165 ASC-9201 Equivalent: Quick Change Chuck 3/8” – 24 Equivalent: Jacob Chuck Adaptor 1-11/16” x 3/8” – 24 175-28713
57 AIR TOOLS TIRE BUFFERS & ACCESSORIES URYU 2.5" HEAVY DUTY HIGH SPEED TIRE BUFFER • High power to weight ratio • Robust sand cast housing • Steel internal parts for increased motor life • Rear muffled exhaust for quieter operation and reduced blowing dust • 3/8”-24 spindle, 14,600 rpm, 2-1/2” wheel capacity • Made in Japan URYU 5" HEAVY DUTY LOW SPEED TIRE BUFFER • Governed air motor for constant power and speed under load • Robust Sand Cast Housing for increased durability • Steel Internal Parts and four bearing construction for increased air motor life • Piped Away Exhaust for quieter operation and reduced blowing dust and surface contamination • 1/2”-13 spindle, 7,200 rpm, 5” wheel capacity • Made in Japan 158-65000 158-12500 ASCOT NO. 158-65000 MFG. NO. UG-65EBL-Asy DESCRIPTION ASCOT NO. 158-12500 2.5" Heavy Duty High Speed Tire Buffer 2.5" HEAVY DUTY HIGH SPEED TIRE BUFFER • High power to weight ratio • Robust sand cast housing • Rear muffled exhaust for quieter operation and reduced blowing dust • 3/8”-24 spindle, 14,600 rpm, 2-1/2” wheel capacity • Steel internal parts for increased motor life • Made in Taiwan 5" HEAVY DUTY LOW SPEED TIRE BUFFER • Governed air motor for constant power and speed under load • Robust sand cast housing for increased durability • Steel internal parts and four bearing construction for increased air motor life • Piped away exhaust for quieter operation and reduced blowing dust and surface contamination • 1/2”-13 spindle, 7,200 rpm, 5” wheel capacity • Made in Taiwan 158-65001 158-12501 UG-1250LM 5" Heavy Duty Low Speed Tire Buffer MFG. NO. DESCRIPTION ASCOT NO. 158-65001 MFG. NO. SG-65R-IF DESCRIPTION 2.5" Heavy Duty High Speed Tire Buffer ASCOT NO. 158-12501 MFG. NO. SG-125H-1M-R DESCRIPTION 5" Heavy Duty Low Speed Tire Buffer
AIR TOOLS TIRE BUFFERS & ACCESSORIES RPG 3" CUT-OFF TOOL • Adjustable speed regulator for precise control • Lock-off throttle to prevent accidental start-up • Rear exhaust directs air away from work area • Durable gears for top performance and long life • FREE SPEED: 22,000 RPM ASCOT WHEEL WEIGHT ADHESIVE REMOVAL TOOL 157-10874 RPG 1/2" REVERSIBLE AIR DRILL • Quick change chuck retainer • Exhaust hose • Side handle • FREE SPEED: 500 RPM • CHUCK SIZE: 1/2” • Swivel air inlet for ease of use • High torque motor to cut through stubborn wheel weight adhesive, body pinstripes, etc. • High RPM to prevent pad from bogging down • Pad made of a tough and long-lasting material • Rubber-insulated motor housing for hand comfort • Lock-off trigger for added safety • Includes eraser pad • SPINDLE THREAD: 5/16"-24 157-03252 58 175-01035 157-03254 157-03253 PARTS & ACCESSORIES ASCOT NO. MFG. NO. 157-01035 175-11035 157-03254 A15352-6 157-03253 DESCRIPTION REPLACEMENT PARTS FOR WHEEL WEIGHT ADHESIVE TOOL A143252-6 Conical Eraser Pads PARTS & ACCESSORIES ASCOT NO. MFG. NO. 175-01035 175-11035 253340 H025 ADAPTER FOR ASCOT ADHESIVE WHEEL WEIGHT REMOVAL ERASER PADS DESCRIPTION REPLACEMENT PARTS FOR 1/2" REVERSIBLE AIR DRILL Side Handle Kit for A1035 Air Drill Air Hose Exhaust Kit for A1035 Air Drill AIR TOOL SPECIFICATIONS ASCOT NO. 157-03252 157-10874 157-01035 MFG. NO. A143252 A874 A1035 FREE SPEED (RPM) 3,700 22,000 500 AIR PRESSURE (PSI) 90 90 90 AIR CON. AVG (CFM) 4 5 4 AIR INLET (NPT) 1/4" 1/4" 1/4" HOSE SIZE 3/8" 3/8" 3/8" LENGTH 7.9" 7.25" 7.5" • Adapter for use with standard tools • 3/8” female thread allows for the adapter to screw directly onto the eraser pads • Will also be included with future eraser pad orders • Made in Taiwan • Similar to Mueller-Kueps 297 013 ASCOT NO. 173-03253 MFG. NO. SO7078-A DESCRIPTION Adapter For Ascot Adhesive Wheel Weight Removal Eraser Pads 173-03253 WEIGHT (LB.) 1.8 1.75 2.86 Replacement Eraser Pads for Wheel Weight Adhesive Removal Tool (6 per Package)
59 AIR TOOLS IR IMPACT WRENCHES 1/2" ULTRA DUTY TITANIUM AIR IMPACT WRENCH • Patented Drive Xchange System™: Helps you get more versatility, torque, and control out of your impact wrench. With 3/8,” 1/2”, and 3/4” drive options and 5 different anvil lengths, you can do more work with less equipment • Powerful Versatility: 1,500 ft.-lbs. of breakaway torque from a unique patented motor design • Quiet: 4 decibels quieter running from a patented motor design • Patented Direct Greasing System: Greasing your tool has never been easier. Directly grease the tool’s hammer for more efficient operation and increased run time • Reliable Performance: Stay working, and at peak power by quickly replacing worn or broken anvils • Ergonomic: Smaller, lighter and better balanced design under 4.5 lbs. and 7.4” overall length 175-00041 175-00061 175-00066 175-00142 153-22362 175-00042 ASCOT NO. MFG. NO. 153-22360 153-22362 175-00041 175-00042 A41H 175-00061 175-00062 175-00066 175-00142 175-00162 A61H AK62H EA66H EA42H EAK62H AK42H 175-00062 DESCRIPTION IR2236TiMAX ½” DXS Quiet Ultra Duty Air Impact Wrench – Standard Anvil IR2236TiMAX-2 ½” DXS Quiet Ultra Duty Air Impact Wrench – 2” Extended Anvil 1/2" Standard Anvil for IR2236QTiMAX Impact Wrench 2 pc. Anvil Set for IR2236QTiMAX Impact Wrench - 1/2" x 2" Extended & 3/4" Standard 3/4" Standard Anvil for IR2236QTiMAX Impact Wrench 2 pc. Anvil Set for IR2236QTiMAX Impact Wrench -1/2" Standard & 3/4" Standard 3/4" x 6" Anvil for IR2236QTiMAX Impact Wrench 1/2" x 2" Extended Anvil for IR2236QTiMAX Impact Wrench 2 pc. Anvil Set for IR2236QTiMAX Impact Wrench -3/4" Standard & 3/4" x 6" Extended INGERSOLL RAND DXS2 DEEP WELL 15PC. METRIC IMPACT SOCKET SE • Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion & finished with Hi-Vis laser etching • DXS Drive delivers up to 20% longer life & up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets • Ball nose retention pin for quick, tool-free installation and removal • Relieved 6 point Hex corners help reduce faster rounding • Includes 15 deep sockets (12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm, 27mm, 30mm, 32mm, 33mm) and foam organizer shadowboard tray. 1/2" ULTRA DUTY TITANIUM IMPACT WRENCH • Titanium hammer case is designed to be strong and durable to protect the interior components • Impact and chemicalresistant housing protects against drops and exposure to shop fluids • Optimized for the vehicle repair industry, heavy trucks, tire lanes, fleet maintenance, body shops, general use, MRO, rail, heavy machinery, oil and gas, ship building and construction 153-42235 ASCOT NO. 153-02235 167-00215 ASCOT NO. 167-00215 MFG. NO. DXSK2M15L DESCRIPTION 153-42235 Ingersoll Rand DXS2 Deep Well 15Pc. Metric Impact Socket Se IR-2235TiMAX-2 153-22235 MFG. NO. IR-2235TIMAX IR-2235QTiMAX-2 DESCRIPTION 1/2" Drive Ultra Duty Impact Wrench - Standard Anvil 1/2" Drive QUIET Ultra Duty Impact Wrench - 2" Extended Anvil 1/2" Drive Ultra Duty Impact Wrench - 2" Extended Anvil 175-00162
AIR TOOLS IR IMPACT WRENCHES 1/2" SUPER DUTY AIR IMPACT WRENCH • Most popular tool in its class • Offers the sheer power and performance features to tackle the toughest of jobs • Durable and economical • Torque Range: 25-350 ft./lb. ASCOT NO. 153-00231 153-02312 MFG. NO. IR-231HA IR-231HA-2 153-02312 3/8" SUPER DUTY AIR IMPACT WRENCH • Tremendous power and longer life • APPLICATIONS: Popular choic of professional mechanics for under car, under hood and bench work • Handle exhaust directs air aw work • TORQUE RANGE: 20-150 ft./ lb., 180 max. DESCRIPTION Standard Anvil Extended Anvil 1/2" SUPER DUTY AIR IMPACT WRENCH • APPLICATIONS: For tire-changing, shock and spring work, front-end work and other hea automotive and truck work • P 500 ft./lb. of torque at a fr 7,000 RPM • IR-244A-2 with a t extended anvil for use with flip sock 153-02442 ASCOT NO. 152-00212 HIGH POWER, LONG LIFE MFG. NO. IR-212 DES 3/8" Super Duty Air Impact Wrench 3/4" SUPER DUTY AIR IMPACT WRENCH • Non-biased motor delivers 1,050 ft./lb. of maximum torque in both forward and reverse • Two pow settings in forward and reverse • Variable speed trigger • Lighter than other 3/ impacts in its class • Handle-vented e directs air away from the operator • Silenc exhaust reduces tool noise while in use ASCOT NO. 153-00244 153-02442 MFG. NO. IR-244A IR-244A-2 Extended Anvil 1/2" SUPER DUTY AIR IMPACT WRENCH • Punish the toughest bolts with 780 ft./lb. of max reverse torque and 1,100 ft./ lb. of nut-busting torque, all powered by Ingersoll Rand’s finely tuned motor and twin-hammer impact mechanism • A pounds, the 2135QXPA is as light as it is po so your hand tires less, letting you ge work done • Ingersoll Rand’s Quie reduces the sound of the tool, sparing y without sacrificing a single ounce of po ASCOT NO. 153-22135 153-32135 MFG. NO. IR-2135QXPA IR-2135QXPA-2 DES S Extended Anvil 60 ASCOT NO. 154-00259 MFG. NO. IR-259 DESCRIPTION 3/4" Super Duty Air Impact Wrench 3/8" SUPER DUTY AIR IMPACT WRENCH • Titanium hammer case • 280 ft./lb. of torque will remove even the toughest nuts and bolts • APPLICATIONS: Transmissions, brak exhaust, body repair and underhood 152-02115 ASCOT NO. 152-02115 MFG. NO. IR-2115TiMAX DESCRIPTION 3/8" Super Duty Air Impact Wrench
61 AIR TOOLS IR IMPACT WRENCHES 3/4" SUPER DUTY AIR IMPACT WRENCH • Powerful 3/4" wrench • Combines compact size with high output • Ideal for everything from spring work to pinion nut and track pad removal and major engine teardowns • Jumbo hammer mechanism delivers up to 1,100 ft./lb. of torque smoothly, with less vibration ASCOT NO. 154-00261 154-02613 154-02616 MFG. NO. IR-261 IR-261-3 IR-261-6 DESCRIPTION Standard Anvil 3" Extended An 6" Extended An 154-00261 1" HEAVY DUTY AIR IMPACT WRENCH • Improved 1" drive tool perfect for truck and heavy equipment maintenance • Offers power and convenience at an affordable price • Compact, lightweight and perfect for working on suspension components • TORQUE RANGE: 100-1000 ft./lb. ASCOT NO. 155-00295 156-02951 3/4" MAXIMUM IMPACT AIR IMPACT WRENCH • 3/4" Maximum Impact Air Impac • 1350 ft./lb. maximum rever a tool that weighs just 7.4 lb enough to access tight spac and designed to withstand t rugged environments • An air mo 16% more efficient than its pr and an easy-to-clean inlet scr less downtime, better tool perf and less money spent on compr • TORQUE RANGE: 200-900 ft./lb ASCOT NO. 154-12145 154-22145 154-32145 MFG. NO. IR-2145QiMAX IR-2145QiMAX-3 IR-2145QiMAX-6 DESCRIPTION Standard Anvil 3" Extended Anvil 6" Extended Anvil 3/4" ULTRA DUTY AIR IMPACT WRENCH • Offers all of the ergonomic, power and durability enhancing features as the IR-2161 but with a 6" extended anvil for those hard to reach applications • Jumbo hammer mechanism • Up to 1,200 ft./lb. of torque • Trouble-fr performance aided by the pressure-feed lube system • Compact and only 7-5/8" long • Handle exhaust ASCOT NO. 154-21617 MFG. NO. IR-2161XP-6 3/4" Ultra Duty Air Impact Wrench ASCOT NO. 155-02850 155-28506 MFG. NO. IR-2850MAX DESCRIPTION Standard Anvil IR-2850MAX-6 Extended Anvil STEEL CORE DESIGN MFG. NO. IR-295 IR-295-S 155-00295 DESCRIPTION Standard An #5 Spline Drive 1" D-HANDLE IMPACT WRENCH • SOLID STEEL IMPACT MECHANISM: Deliver 2,100 ft./lb. of torque • HIGHLY ENGINEERED DESIGN: Delivers the power you need over the life of the tool • STEEL CORE DESIGN: Nothing’s been proven to last longer • CHEMICAL RESISTANT HOUSING & STEEL CORE: Stands up to drops and harsh work environments • LIGHTWEIGHT: 25% lighter than the industry’s leading 1" wrench • 360° ADJUSTABLE HANDLE: The side handle rotates fully around the tool as the job demands • SWIVEL HOSE CONNECTION: Keeps cords from getting tangled so you can move freely around the garage • 6" ANVIL EXTENSION: Increases accessibility in hard to reach places 154-22145
AIR TOOLS IR IMPACT WRENCHES 62 155-02856 1" HEAVY DUTY AIR IMPACT WRENCH • Combines exceptional power, durability and operator convenience • Delivers 1450 ft./lb. of maximum torque at 90 psi (1770 ft./lb. max torque at 120 psi) with a 5000 RPM free speed and four-position regulator 360º swivel inlet • Chemical resistant boot • Available in 6" extended anvil and 6" extended #5 spline anvil A1:O89 or high production truck tire changing ASCOT NO. 155-28560 155-02856 156-28566 MFG. NO. IR-285B IR-285B-6 IR-285BS-6 DESCRIPTION Standard Anvil 6" Extended Anvil #5 Spline Super Duty Anvil 1" SUPER DUT AIR IMP 1" ULTRA DUTY AIR IMPACT WRENCH • 1" drive wr torque to handle t • Built-in pr handle and built misting of the air motor • Available in 6" extended anvil and 6" extended #5 spline drive anvil for high production truck tire changing 155-02806 ASCOT NO. 155-00280 155-02806 156-28006 MFG. NO. IR-280 IR-280-6 IR-280-S6 DESCRIPTION Standard Anvil 6" Extended Anvil #5 Spline Super Duty Anvil 1" ULTRA DUTY AIR IMPACT WRENCH 1" SUPER DUTY AIR IMPACT WRENCH • Designed for getting into cramped spaces with three-way adjustable handle • Ideal for spring work, tractor pads, bus maintenance and off-road/farm equipment • T RANGE: 150-1000 ft./lb. (1600 maximum) ASCOT NO. 155-00290 156-02901 MFG. NO. IR-290 IR-290-S DESCRIPTION Standard Anvil #5 Spline ASCOT NO. 155-21710 MFG. NO. 2171XP DESCRIPTION Standard Anvil • High power-to-weight ratio • Full power reverse • 3-position power regulator • 360° swivel inlet • MAXIMUM TORQUE: 1250 ft./lb. • APPLICATIONS: Most powerful 1" wrench for spring work, tractor pads, bus maintenance and off-road/farm equipmen • MAXIMUM TORQUE: 2000 ft./lb. ASCOT NO. 155-00293 156-02931 MFG. NO. IR-293 IR-293-S DESCRIP Standard Anvil #5 Spline Drive FULL POWER REVERSE 155-21710
63 AIR TOOLS AIR HAMMERS & DIE GRINDERS SUPER DUTY AIR HAMMER • APPLICATIONS: For front-end and heavy exhaust work, riveting, king pin removal, bushing driving and bolt shearing • Controls starting strokes precisely with an extra-sensitive tease throttle • Super duty power, at up to 1,725 blows per minute • CHISEL SHANK DIAMETER: .401" ASCOT NO. 159-00132 MFG. NO. IR-132 AIR HAMMER KITS • Five-piece chisel set in a plastic pouch with .401" shank diameters • INCLUDES: Edging Tool, Tail Pipe Cutter, Straight Chisel, Cutting Chisel and Pouch FIVE-PIECE CHISEL SET ASCOT NO. 171-01151 171-01161 171-01171 MFG. NO. IR-115K IR-116K IR-117K NEEDLE SCALER • APPLICATIONS: For surface preparation work involving the cleaning or removal of paint, rust, dirt or weld slag • Durable, dependable and economical FOR SURFACE PREP AND CLEANING ASCOT NO. 157-00125 157-02219 DURABLE & ECONOMICAL 157-00125 COMPACT & LIGHTWEIGHT MFG. NO. DESCRIPTION Needle Scaler IR-125B PF2219 Needle Scaler Replacement Needles EASY TO HANDLE DESCRIPTION IR-115 Air Hammer Kit IR-116 Air Hammer Kit IR-117 Air Hammer Kit 171-01161 SUPER DUTY MINI AIR DIE GRINDER • APPLICATIONS: For grinding, edgebreaking, de-burring, porting and polishing • Right-angle configuration • Compact, lightweight and easy to handle HEAVY DUTY AIR DIE GRINDER • APPLICATIONS: Designed for porting, light weld grinding and breaking sharp edges • 25,000 RPM • Self-locking throttle lever • Positive grip 1/4" capacity collet chuck with two collet wrenches ASCOT NO. 157-00308 MFG. NO. IR-308B DESCRIPTION Heavy Duty Air Die Grinder 157-00308 DESCRIPTION Super Duty Air Hammer HEAVY DUTY ANGLE AIR DIE GRINDER SUPER DUTY POWER • For work in confined areas • Features a right angle head • APPLICATIONS: For grinding, porting, polishing, de-burring, breaking sharp edges • Selflocking throttle lever • Positive grip 1/4" capacity collet chuck FOR WORK IN CONFINED AREAS 159-00132 ASCOT NO. 157-00302 MFG. NO. IR-302B Heavy Duty Angle Air Die Grinder 157-00302 DESCRIPTION ASCOT NO. 157-00307 MFG. NO. IR-307B DESCRIPTION Super Duty Mini Air Die Grinder 157-00307
AIR TOOLS FINISHING TOOLS & AIR DRILLS 3/8" HEAVY DUTY AIR DRILL • Planetary gear reduction balances the load on bearings and gears, increasing tool life • Variable speed throttle makes starting holes easy • Positive action trigger stop reduces maximum speed at any time TIRE BUFFERS VARIABLE SPEED THROTTLE LEVERSTYLE TEASE TRIGGER 157-17802 • APPLICATIONS: For quick work of patchwork and roughing up low areas for recapping, tire scuffing and cleaning tire moldings • Lever style tease trigger with lock-off for easy operation 64 JACOBS CHUCK ASCOT NO. 157-07802 157-17802 MFG. NO. IR-7802A IR-7802RA DESCRIPTION Standard Air Drill Reversible Air Drill 157-00327 1/2" HEAVY DUTY AIR DRILL • APPLICATIONS: Designed for drilling, hole sawing, cylinder honing and other jobs that call for a 1/2" size • Industrial grade 1/2" chuck, ball and needle bearing construction and double reduction planetary gearing for longer life • No-load speed of 500 RPM and auxiliary side handle INDUSTRIAL GRADE 1/2" CHUCK ASCOT NO. 157-00327 157-01327 MFG. NO. IR-327 IR-327LS-A DESCRIPTION High Speed Tire Buffer Low Speed Tire Buffer, includes Over Hose ASCOT NO. 157-07803 157-17803 MFG. NO. IR-7803A IR-7803RA DESCRIPTION Standard Air Drill Reversible Air Drill 157-17803
65 AIR TOOLS FINISHING TOOLS & AIR DRILLS HEAVY DUTY AIR ANGLE SANDER 7" PAD • Heavy-duty motor handles tough jobs • Lightweight at only 4.5 lb. (2.04 kg.) • Ball Bearing construction for increased tool life • APPLICATIONS: rouging body filler, removing rust, and smoothing welds SURFACE CONDITIONING KIT • KIT INCLUDES: IR301 1/4" angle head die grinder in a blow molded plastic case with two coarse and two medium grit 3" 3M Rolco™ surface conditioning pads, two coarse, two medium grit 2" 3M Rolco™ surface conditioning pads and a disc holder 157-00313 ASCOT NO. 157-00313 MFG. NO. DESCRIPTION IR-313A Heavy Duty Air Angle Sander 7" Pad HEAVY DUTY DUAL ACTION QUIET AIR SANDER 6" PAD • A built-in silencer muffles noise as you work • APPLICATIONS: Quality sander used for feather edging, metal preparation and finish work on body filler QUICK CHANGE CHUCK ASCOT NO. MFG. NO. 158-03012 158-00311 ASCOT NO. 158-00311 MFG. NO. IR-311A DESCRIPTION Heavy Duty Dual Action Quiet Air Sander 6" Pad DESCRIPTION IR-301-2MK Surface Conditioning Kit
AIR TOOLS AIR TOOL ACCESSORIES AIR TOOL LUBRICANTS ASCOT NO. MFG. NO. 181-10510 181-10540 181-11510 181-11540 181-12228 328-10001 105-4T 115-LBK1 115-4T DESCRIPTION 105-LBK1 4 Oz. IR 105 Grease IR10 Oil & Grease Gun Head (6) 4 oz. Tubes - IR 105 Grease Refills 4 oz. IR 115 Grease IR10 Oil & Grease Gun Head (6) 4 oz. Tubes - IR 115 Grease Refills R000A2-228 Grease Gun 100-1 181-10510 1 lb. Grease for Impact Wrenches MOTOR TUNE-UP KITS • INCLUDES: the vanes, gaskets and seals for a complete tune-up • 231-TK3 also includes ball bearings AIR TOOL COVERS • Vinyl boots also absorb some of the tool vibration and protect air impact ratchets, wrenches and drills from external damage IR TOOL NO. KIT NO. 212 211 231C, 231HA-2 2235 244A, 244A-2 261, 261-2, 271 285B-6, 285BS-6, 285B 259 2135QXPA, 2135QXPA-2 212-Boot 211-P32 231-Boot 2235M-Boot 244-Boot 261-Boot 285-Boot 259-Boot 2135M-Boot IR TOOL NO. 212 231C, 231HA-2 235 ASCOT TOOL NO. 176-20232 176-21132 176-23122 176-13532 176-24432 176-26132 176-28532 176-25925 176-21350 244A, 244A-2 261, 271 280 Series 7803A, 7803RA 285B-6 2235TiMAX 2135QXPA, 2135QXPA-2 KIT NO. 212-TK2 231-TK3 235-TK3 244-TK2 261-TK2 280-TK2 7803-TK1 285B-TK1 2235-TK1 2135-TK2 ASCOT TOOL NO. 176-10212 176-10221 176-12313 176-10244 176-10261 176-10280 176-17803 176-10285 176-22235 176-32135 RETAINING RINGS IR TOOL NO. 231-425A R1A-159 291-425 291-426 ASCOT TOOL NO. 175-31425 175-01590 175-91425 175-81426 DESCRIPTION Socket Retainer for IR231, 231-2 Retainer O-Ring for IR 231, 231-2 Socket Retainer for IR-281, 285 Retainer O-Ring for IR-281, 285 66 HAMMER MECHANISM TUNE-UP KIT • INCLUDES: the anvil, hammer (or pins) and gaskets for the impact mechanism • 110-TK1 includes only the cam ball, two anvil pins and anvil spring 175-52122 175-83071 175-82651 IMPACT WRENCH ACCESSORIES ASCOT NO. MFG. NO. DESCRIPTION IR TOOL NO. 231C, 244A 231-2HA-2, 244A-2 2235TiMAX 2135QXPA-2 KIT NO. 231-THK1 231-THK2 ASCOT TOOL NO. 176-00231 178-01231 2235-THK1 178-02235 2135-THK1 178-02335 178-02135 175-52122 175-82651 175-83071 86430 H-082651 86440 1/2" Wrench Anvil Retainer Clip 1" Impact Wrench Retainer Clip O-Ring O-Ring for 1/2" Impact Wrench Retainer Clips
67 AIR TOOLS AIR TOOL LUBRICANTS & CONDITIONER BLASTER AIR TOOL CONDITIONER • APPLICATIONS: Thoroughly cleans internal pneumatic tool parts, restoring them to peak performance and prolonging tool life • Breaks loose deposits that create friction and impede smooth operation • Provides long-lasting lubrication • Protects tools from freezing down to -25°F • 12 cans per case SUPER RED PNEUMATIC AIR TOOL LUBRICANT • APPLICATIONS: Dissolves gum & varnish formation • Prevents gum & varnish formation • Ensures smoother starts • Special rust & oxidation inhibitor • Clean and free running • 12 bottles per case THOROUGHLY CLEANS PARTS DISSOLVES GUM & VARNISH ASCOT NO. 181-00404 181-01404 MFG. NO. DESCRIPTION 16-ATC ATC-TS Blaster Air Tool Conditioner – 11 Oz. Blaster Air Tool Conditioner - 3.5 Oz. Aerosol ASCOT NO. MFG. NO. DESCRIPTION 181-00406 0406 Super Red Pneumatic Air Tool Oil, 32 Oz. MARVEL AIR TOOL OIL • 12 Bottles per case • 4 oz. bottles • Specifically formulated for use in all air tools or in-line lubricators Prevents rust • Assures maxium tool performance • Made in the U.S.A MARVEL AIR TOOL OIL • APPLICATIONS: Specially formulated f use in all piston type rotary air tools and in-line air lubricators • Prevents rust forma while providing positive lubrication for smooth starting and longer tool life • As maximum performance by dissolving gum and sludge • 6 bottles per case PREVENTS RUST PREVENTS RUST ASCOT NO. MFG. NO. DESCRIPTION 181-00085 MM085 32 Oz. ASCOT NO. MFG. NO. DESCRIPTION 181-00080 MM08R Marvel Air Tool Oil 4 Oz.
AIR TOOLS WORK STATIONS MOBILE WHEEL WORK STATION • Features gas-strut assisted boom that supports the weight of those heavy impact wrenches • The suspended impact wrench is capable of rotating to the operator desired position • Features side and rear storage compartments designed to organize sockets, tire irons, lubricants, hoses and various wheel parts • Air wrench is supported and held in desired position • Air wrench suspension boom allows for directional freedom and reduces damage TIRE TOOL STATION • Organize your tools • Universal top tray with slots for torque sockets, etc. • Dual cradles for impact guns, 1/4" airline connections • INCLUDES: (2) 25’ x 3/8" recoil hoses with 1/4" swivel fittings 68 515-02400 515-00555 ASCOT NO. MFG. NO. 515-00555 WS-005 DESCRIPTION Mobile Wheel Work Station ASCOT NO. 515-02400 MFG. NO. 2400 DESCRIPTION Tire Tool Station
69 CORDLESS TOOLS IR CORDLESS TOOLS 1/2" CORDLESS IMPACT WRENCH • Performance: The patented DXS® system features torque that works smarter, not harder. Tight-fitting DXS® attachments deliver up to 15% more motor torque to fasteners*, making the tools more effective – so you never lose power. • Productivity: Fast-swapping DXS® accessories let you perform multiple jobs with one tool, decreasing downtime and saving space in your toolkit. • Versatility: Maneuver more easily with a compact design that provides greater access to tight spaces. IQV20™ battery compatibility eliminates the need to purchase multiple battery types. • Durability: Withstand the rigors of the job site with an impact-resistant body and IPX6-certified environmental rating for protection against water ingress. • Ergonomics: Lightweight 6.1lb (bare tool) build and ergonomic pistol grip for comfortable all-day use and less operator fatigue. ASCOT NO. MODEL 153-71523 W7153-K22 BATTERIES INCLUDED 2 DRIVE SIZE 1/2" ANVIL Standard MAX TORQUE FT./LB. 1,003 (1,601) FREE SPEED (RPM) 0-1900 LENGTH IN. WEIGHT 6.1 lb. 8.3 1" CORDLESS IMPACT WRENCH • Remove hoses & trip hazards to keep operators & technicians saf • World's Most Powerful 1" Cordless Impact Wrench with best in class power-to-weight ratio • 250 bolts per charge – tackle a full day’s worth of work • 3,000 ft-lbs of nut busting torque, 2,200 ft-lbs of tightening torque • IP56 rated for tough environmental conditions • IQv Power Control System includes 3 modes: MAX Power, MID, and Snug • 360° adjustable D-handle: rotates fully around the tool as the job demands COMPATIBLE WITH IQV20 SERIES BATTERY ASCOT NO. 153-94911 153-96911 MODEL W9491-K4E W9691-K4E BATTERIES INCLUDED 4 4 DRIVE SIZE 1" Square 1" Square ANVIL Standard 6" Extended MAX TORQUE FT./LB. 2600 ft./lbs. 3000 ft./lbs. FREE SPEED (RPM) 890 890 BPM 1170 1170 LENGTH IN. WEIGHT 20-1/8" 26-1/8" 38.3 39.9 360° ADJUSTABLE D-HANDLE 153-96911
CORDLESS TOOLS MILWAUKEE CORDLESS TOOLS CORDLESS 1/2" DRIVE IMPACT WRENCH • 4 CUSTOMIZABLE MODES: Provides multiple fastening torque outputs designed for sedans, light trucks and box trucks • POWERSTATE™ BRUSHLESS MOTOR: Delivers up to 750 ft./ lb. of fastening torque and 1,100 ft./lb. of nut-busting torque • LONG MOTOR LIFE: POWERSTATE™ Brushless Motor delivers maximum power and long motor life • FASTER TIRE SERVICE: Enables users to perform faster tire service by removing the hassle of pneumatic hoses, compressors, and torque sticks • PART OF THE M18™ SYSTEM: Featuring over 175+ Tools 153-76922 LONG 1" DRIVE EXTENDED ANVIL D-HANDLE IMPACT WRENCH • POWERSTATE™ Brushless Motor delivers up to 2,000 ft-lbs of nut-busting torque and 1,900 ft-lbs of fastening torque • Install up to 200 1-1/4" bolts on a single HIGH OUTPUT™ HD12.0Ah battery • The 4-Mode DRIVE CONTROL™ provides you with greater control over the output speed and power of the MILWAUKEE® High Torque Impact Wrench • The ONE-KEY™ Technology allows you to customize, track, and manage the impact wrench with the ability to set a repeatable torque output for maximum control 155-86922 70 ASCOT NO. MFG. NO. 153-76920 2769-20 153-76922 2769-22R DESCRIPTION Cordless 1/2" Drive Impact Wrench – 2" Extended Anvil (Bare Tool) Cordless 1/2" Drive Impact Wrench – 2" Extended Anvil (Kit) ASCOT NO. 155-86920 155-86922 MFG. NO. 2869-20 2869-22 DESCRIPTION 1" Drive Extended Anvil D-Handle Impact Wrench (Bare Tool) 1" Drive Extended Anvil D-Handle Impact Wrench (Kit) EXTENDED ANVIL
71 CORDLESS TOOLS MILWAUKEE CORDLESS TOOLS CORDLESS LOW SPEED BUFFER KIT • Dedicated buffing and drilling • 2-Mode Drive Control™ • Drilling Mode: 1,200 RPM • Buffing Mode: 2,500 RPM • Runtime to complete up to 30 flat repairs on a single XC4.0Ah battery • Premium rubber overmold withstands corrosive materials and provides increased comfort when in use • Compatible with all M12™ batteries & chargers • POWERSTATE™ Brushless Motor • REDLINK PLUS™ Electronic Intelligence: • REDLITHIUM™ batteries: • Kit includes: Low Speed Tire Buffer, M12™ REDLITHIUM™ CP2.0 Battery, M12™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack, M12™ Lithium-ion Battery Charger, Quick Change Adapter, Carrying Case 158-40922 COMMERCIAL FLAT TIRE REPAIR KIT • Designed to deliver you increased productivity for high volume commercial flat repairs that commercial tire technicians demand • Kit includes: M12 FUEL™ Low Speed Tire Buffer (2409-20), M12 FUEL™ 1/2" Drill Driver (Tool Only) (2503-20), Quick Change Adapter, M12™ REDLITHIUM™ CP2.0 Battery (48-11-2420), M12™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack(48-11-2440), M12™ Lithium-ion Battery Charger (48-59-2401) & Carrying Case 158-45922 INCREASE FOR HIGH PRODUCTIVITY VOLUME REPAIRS ASCOT NO. 158-40920 158-40922 MFG. NO. 2409-20 2409-22 DESCRIPTION Cordless Low Speed Buffer Cordless Low Speed Buffer Kit ASCOT NO. 158-45922 MFG. NO. 2459-22 DESCRIPTION Commercial Flat Tire Repair Kit
CORDLESS TOOLS MILWAUKEE CORDLESS TOOLS CORDLESS 1/4" HIGH SPEED RATCHET KIT Our M12 FUEL™ 1/4" High Speed Ratchet Kit is part of the latest addition to our best-inclass lineup of ratchets. This MILWAUKEE® cordless ratchet kit features the fastest speed while installing and removing fasteners. The most compact head size in its class gives you more access in tight spaces. A steel yoke housing and POWERSTATE™ Brushless Motor deliver the superior durability that you expect from Milwaukee. The M12 FUEL™ High Speed Ratchets are an ideal addition to any technician tool chest, allowing you to be more productive than any other battery-powered ratchet. 72 ASCOT NO. MFG. NO. 172-56622 2566-22 DESCRIPTION Cordless 1/4" Ratchet Tool Kit CORDLESS 3/8" RATCHET TOOL KIT • MOST POWERFUL: Delivers industry leading torque output of up to 40 ft./lb. • MOST COMPACT: Up to 20% smaller head size • MOST DURABLE: Worlds 1st brushless ratchet provides 2x longer motor life • Best-in class torque to head size ratio • Premium metal components for longer durability ASCOT NO. MFG. NO. 172-55721 2557-21 DESCRIPTION Cordless 3/8" Ratchet Tool Kit PART OF THE M12™ SY T OF THE
73 CORDLESS TOOLS MILWAUKEE CORDLESS TOOLS M18 CORDLESS TIRE INFLATOR • Fastest 18V Cordless Tire Inflator: Top off 33” light truck tires in under 1 minute • Truefill™ Technology: Auto pressure check feature activates to ensure PSI target is achieved,automatic shut-off at selected PSI prevents overinflation • Tire capacity: Premium components and unmatched durability to handle tires over 100 PSI, rated for 150 PSI max • Optimized for passenger, light truck and other medium duty tires • PSI memory preset: Save your most used PSI rating with up to 4 PSI slots • On-board hose & nozzle storage: easily store 36” hose and attachments • Accessories: Includes all brass Schrader chuck, inflation needle, inflator nozzle & Presta chuck • Anti-vibration feet: minimize tool walk while in use • Fits all M18™ Batteries MILWAUKEE M18 HOTSHOT JUMP STARTER • Always Ready To Jump • True All-Weather Performance • Longer Life • Jump with M18™ Batteries, Optimized For M18™ REDLITHIUM™ XC5.0 & Above • Prepared To Jump In Under 70 Seconds • No Maintenance Required • Jump up To 8.1L Gas & 3.0L Diesel • Capacitors Rated Up To 500,000 Cycles • Performs At -4°F To 122°F • Up To 70 Jump Starts With One M18™ XC5.0 Battery • 2000 Peak Amps • Spark Proof, Reverse Polarity, & Overheat Protection • Custom Clamp Design • Digital Display With Voltage Readout • IP65 Rated (Tool Only) 477-84820 345-38412 ASCOT NO. MFG. NO. 477-84820 DESCRIPTION 2848-20 M18 Cordless Tire Inflator MILWAUKEE TOOL M18 CORDLESS 2-SPEED GREASE GUN KIT • Delivers maximum pressure and unmatched versatility, offering an industry leading 10,000 PSI max operating pressure and a patent pending pre-set grease counter that allows service and maintenance professionals to dispense precise amounts of grease • 2-speed design offers users the ability to select between max pressure and max flow rate • Unique features include an on-board LED light, a lock-on/lock-off trigger, and a plunger rod with markings to gauge how much grease is left in the barrel • The tool’s stand up design and shoulder strap capability offer user convenience, while limiting fatigue and the 48” flexible hose offers greater accessibility when greasing hard to reach fittings Milwaukee Tool M18 Cordless 2-Speed Grease Gun Kit • Powered by an M18™ REDLITHIUM™ Battery pack, this is the industry’s only 18V grease gun that’s battery is compatible with a system of tools Kit Includes: • (1) M18™ Cordless 2-Speed Grease Gun (Tool Only)(2646-20) • (1) M18™ & M12™ Multi-Voltage Charger(48-59-1812) • (1) M18™ Compact REDLITHIUM™ Battery (48-11-1815) • (1) 48” Flex Hose w/ Spring Guard • (1) High Pressure Grease Coupler • (1) Carrying Case • (1) Shoulder Strap ASCOT NO. MFG. NO. 345-38412 3841-20 DESCRIPTION Milwaukee M18 Hotshot Jump Starter 345-11835 ASCOT NO. MFG. NO. 324-64621 DESCRIPTION 2646-21CT Milwaukee M18 Cordless 2-Speed Grease Gun Kit PART OF THE M18™ SYSTEM
CORDLESS TOOLS MILWAUKEE CORDLESS TOOLS M18 LITHIUM 3.0AH HIGH OUTPUT BATTERY • REDLINK™ INTELLIGENCE: Our battery circuitry provides optimized performance and overload protection using total system communication between tool, battery and charger • BEST-IN-CLASS CONSTRUCTION: Offers long-lasting performance and the best protection against jobsite, weather and environmental conditions • FUEL GAUGE ONBOARD: Displays remaining run-time • VERSATILITY: Powers all 175+ M18™ cordless solutions • Compatible with all M18™ tools • 2 year battery warranty M18 LITHIUM 5.0AH BATTERY PACK • REDLINK™ INTELLIGENCE: Provides optimized performance and overload protection using total system communication between tool, battery and charger • BEST-IN-CLASS CONSTRUCTION: Offers long-lasting performance and durability • FUEL GAUGE ONBOARD: Displays remaining runtime for less downtime on the job • ALL-WEATHER PERFORMANCE: Delivers fade free power in extreme jobsite conditions • VERSATILITY: Powers more than 175+ Milwaukee® M18™ cordless power tools • Ground transport only M18 LITHIUM HD12.0 HIGH OUTPUT BATTERY • The M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 is the best performing cold weather pack ever made, providing increased power in extreme cold weather conditions (below 0F / -18C) • Provides the most work per charge of any professional power tool battery in the industry, driving full corded replacement on the jobsite • The REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery is fully compatible with 150+ M18™ solutions 74 345-11835 345-11850 ASCOT NO. MFG. NO. 345-11835 DESCRIPTION 48-11-1835 M18 Lithium High Output Battery CP3.0 M12 LITHIUM BATTERIES • REDLINK™ INTELLIGENCE: Provides optimized performance and overload protection using total system communication between tool, battery and charger • BEST-IN-CLASS CONSTRUCTION: Offers long-lasting performance and durability • ALL-WEATHER PERFORMANCE: Delivers fade-free power in extreme job site conditions • VERSATILITY: Powers 70+ Milwaukee M12 cordless solutions ASCOT NO. MFG. NO. 345-12430 345-12440 345-12460 DESCRIPTION 48-11-2430 48-11-2440 48-11-2460 M12 Lithium 3.0 Compact Battery M12 Lithium XC4.0 M12 Lithium XC6.0 345-12430 RESISTANT BATTERY STARTER KIT • Kit includes: - (2) M18™ REDLITHIUM™ XC5.0 Resistant Batteries, (1) M18™ & M12™ Multi-Voltage Charger, (1) Contractor Bag • Best-in-class construction: Resistant housing designed to provide increased protection against exposure to common oils, greases, and solvents • All-weather performance: delivers fade free power in extreme jobsite conditions • Fuel gauge onboard: Displays remaining runtime • REDLINK™ Intelligence: Our battery circuitry provides optimized performance and overload protection using total system communication between tool, battery, and charger • Versatility: Powers more than 250+ Milwaukee® M18™ cordless power tools • Charges all M18™ & M12™ Batteries: Full system compatibility • Single unit simplicity for quick charge of all M12™ and M18™ battery packs ASCOT NO. MFG. NO. 345-11852 DESCRIPTION 48-59-1852R Milwaukee Tool M18 REDLITHIUM XC5.0 Resistant Battery Starter Kit 345-12440 345-12460 ASCOT NO. 345-11850 MFG. NO. 48-11-1850 DESCRIPTION M18 Lithium 5.0AH Battery Pack ASCOT NO. 345-11812 345-11812 MFG. NO. 48-11-1812 DESCRIPTION M18 Lithium High Output Battery HD12.0 PART OF THE M18™ SYSTEM PART OF THE M18™ SYSTEM PART OF THE M12™ SYSTEM
TIRE INFLATION PILOT CAGES KEN-TOOL OFFERS SIZES AND DESIGNS FOR ALL YOUR NEEDS. SLEEVE™ POLYAMIDE WHEEL CENTERING SLEEVES HAMMERS & WEDGES TIRE IRONS TUBELESS TRUCK TIRE MOUNT/DEMOUNT IRONS HEXCHEX® MULTI-SIZE LOOSE WHEEL NUT INDICATORS DUAL WHEEL SEPARATION BAG
1 Publizr