AIR SYSTEMS AIR SYSTEMS Air Compressors Inflation Systems Filters, Regulators & Lubricators Hose Reels & Accessories Air Line Couplers & Plugs Hose Adapters Clamps WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE
15 AIR SYSTEMS Advantage Series The Advantage Series is a fully packaged unit with all of the additional accessories customers need included. Advantage series compressors are typically shipped from the factory in 24 hours or less. Compressors are shipped ready to install and operate. Each new assembled unit comes with a standard three-year standard warranty, with option for a six-year extended warranty with the purchase of an extended warranty kit. RECIPROCATING AIR COMPRESSOR • 5-25 HP • MAXIMUM PRESSURE: Up to 175 PSIG • 17.0 to 203.6 ACFM at 175 PSIG • Two Stage, Splash Lubricated • Tank-Mounted, Simplex and Duplex Models • Vertical or Horizontal Configurations • Package comes standard with up to six pre-installed options • Factory filled with ChampLub lubricant • Control panel with control voltage transformer SIZING A COMPRESSOR HEAVY DUTY APPLICATION GUIDE ASCOT NO. 101-00058 101-00078 101-00158 101-01012 101-11012 101-40780 101-40781 101-40782 101-40783 101-41012 101-41112 101-42112 101-44112 101-41512 101-42512 101-43512 101-44512 MFG. NO. VR5-8 VR5-8 VR5-8 VR5-8 VR5-8 VR7F-8 VR7F-8 VR7F-8 VR7F-8 VR10-12 VR10-12 HR10-12 HR10-12 HR15-12 HR15-12 HR25-12 HR25-12 HP OR HPD 5 5 5 5 5 7.5 7.5 7.5 7.5 10 10 10 10 15 15 25 25 * V: Vertical, H: Horizontal Configuration PART NO. ADVA-S01 ADVA-S05 ADVA-S126 ADVA-S03 ADVA-S148 ADVA-S168 ADVA-S13 ADVA-S17 ADVA-S15 ADVA-S21 ADVA-S19 ADVA-S25 ADVA-S23 ADVA-S33 ADVA-S31 ADVA-S37 ADVA-S35 PUMP MFG. NO. R-15B R-15B R-15B R-15B R-15B R-15B R-15B R-15B R-15B R-30D R-30D R-30D R-30D R-40A R-40A R-70A R-70A TANK VOLTS 230/1 208/3 230/1 230/3 230/3 208/1 230/1 208/3 230/3 208/3 230/3 208/3 230/3 208/3 230/3 208/3 230/3 CAPACITY (GAL.)* 80V 80V 80V 80V 80V 80V 80V 80V 80V 120V 120V 120H 120H 120H 120H 120H 120H 175 PSI RATING CFM DEL’Y 17.0 17.0 17.0 17.0 17.0 22.3 22.3 22.3 22.3 33.8 33.8 33.8 33.8 54.1 54.1 90.7 90.7 RPM 737 737 737 737 737 949 949 949 949 718 718 718 718 776 776 776 776 DIMENSIONS (LXWXH) 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 43 x 30 x 81 43 x 30 x 81 71 x 32 x 55 71 x 32 x 55 73 x 36 x 62 73 x 36 x 62 74 x 36 x 65 74 x 36 x 65 APPROX. SHIP WEIGHT (LBS.) 590 590 590 590 590 630 630 630 630 895 895 895 895 1210 1210 1557 1557 101-41112 SIMPLEX & DUPLEX MODELS SHIPPED QUICKLY BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS
AIR SYSTEMS 16 DUPLEX AIR COMPRESSORS FULLY PACKAGED COMPRESSORS: Compressors equipped with all of the desired options such as Mounted Control Panel, Low Oil Level Monitor, Automatic Tank Drain, Air-Cooled Aftercooler and Vibration Isolators. DUPLEX FULLY PACKAGED COMPRESSORS: Two (2) Compressors and accessories supplied in one package provides the flexibility of single operations, alternating between compressors, or duplex operations to meet high air demands • INCLUDES: Automatic Tank Drain, Vibration Isolators, Two (2) Mounted Control Panels plus alternator, Low Oil Level Monitors and Air Cooled Aftercoolers. CHAMPION PREMIUM EXTENDED WARRANTY KITS AVAILABLE 6-year premium warranty kits for all Advantage Series compressor packages that utilize R-Series pumps. When purchasing one of these compressor packages, simply order the premium warranty kit that corresponds with the correct package, register your compressor and receive an additional 3 years of warranty protection on your compressor pump. These kits include enough service items for 6 oil and filter changes. The kits will utilize their Champlub synthetic oil. ASCOT NO. 101-51120 101-53120 101-54120 101-75120 101-75320 101-75420 101-10325 MFG. NO. HR5D-12 HR5D-12 HR5D-12 HR7D-12 HR7D-12 HR7D-12 HR10D-25 HP 5 5 5 7.5 7.5 7.5 10 VOLTAGE/PHASE 230/1 208/3 230/3 230/1 208/3 230/3 230/3 TANK SIZE 120 120 120 120 120 120 250 TANK CONFIG. Horiz. Horiz. Horiz. Horiz. Horiz. Horiz. Horiz PUMP MFG. NO. R-15B R-15B R-15B R-30D R-30D R-30D R-30D ACFM @175 PSIG 34.6 34.6 34.6 51.6 51.6 51.6 69.6 ACAC STD STD STD STD STD STD STD CHAMPION GASOLINE AIR COMPRESSORS • Truck Bed Mountable, ideal for Field Service Applications • Heavy Duty Two-Stage Compressors • V-Belt Drive with Totally Enclosed Belt Guard • Centrifugal unloader for loadless start prolongs motor life • Gasketless Design • Vibration Isolators Included on 30 gallon models • Each new assembled unit comes with a three-year standard warranty, six-year extended warranty ASCOT NO. MFG. NO. DESCRIPTION KITS 106-37831 CC1137831 KOHLER KIT: Maintenance Kit for 14HP Kohler Engine Gasoline Air Compressor. Includes: Prefilter, air filter, spark plug, fuel filter, engine oil, Champion air filter and compressor oil 106-37832 CC1137832 HONDA KIT: Maintenance Kit for 13HP Honda Engine Gasoline Air Compressor. Includes: Air filter, spark plug, engine oil, Champion air fliter and compressor oil ASCOT NO. 102-11530 102-11560 102-11880 102-13730 102-13760 102-13780 MFG. NO. HGR7-3H HGR7-6H HGR7-8H HGR7-3K HGR7-6K HGR7-8K HP OR HPD 13 13 13 14 14 14 TANK SIZE 30 60 80 30 60 80 TANK CONFIG. Horiz. Horiz. Horiz. Horiz. Horiz. Horiz. ENGINE TYPE Honda Honda Honda Kohler Kohler Kohler ACFM @175 PSIG 23.2 23.2 23.2 23.2 23.2 23.2 RPM 1025 1025 1025 1025 1025 1025 APPROX. SHIP WEIGHT (LBS.) 434 500 539 434 500 539 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS
17 AIR SYSTEMS RV Series RV-SERIES RECIPROCATING AIR COMPRESSORS • Two-stage, splash lubricated compressor pump • 5 - 15 HP • Up to 175 PSIG • 17.3 - 49 ACFM at 175 PSIG rating • Tank mounted, vertical or horizontal configuration • Automatic start/stop operation • Factory filled with ChampLub AC lubricant • Mounted Magnetic Starters standard on all Centurion II models (Except for 5 HP models with 3450 RPM motors) MOUNTED MAGNETIC STARTER 125 PSI RATING* ASCOT NO. MFG. NO. HP 101-65801 101-67581 101-67514 101-67583 101-67515 VRV5-8 VRV7F-8 HRV7-12 VRV7-8 VRV7-12 101-61212 HRV10-12 101-61081 VRV10-8 101-61012 VRV10-12 101-61512 HRV15F-12 101-61513 VRV15F-12 7.5 7.5 7.5 10 10 10 15 15 TANK SIZE **5 80 **7.5 80 120 80 120 120 80 120 120 120 PUMP MFG NO. RV-15A RV-15A RV-30A RV-15A RV-30A RV-30A RV-30A RV-30A RPM 805 990 670 670 670 810 810 810 RV-30A 1045 RV-30A 1045 CFM DISPL. 23.5 28.7 39.6 39.6 39.6 47.3 47.3 47.3 60.9 60.9 175 PSI RATING* RATING CFM DEL’Y RPM 17.3 23.1 25.8 25.8 25.8 34.8 34.8 34.8 49 49 715 975 570 570 570 699 699 699 1020 1020 *Units tested in accordance with CAGI/PNEUROP Acceptance Test Code PH2CPTC2 CFM DISPL. 20.8 28.6 31.9 31.9 31.9 40.7 40.7 40.7 59.5 59.5 RATING CFM DEL’Y 16.5 22.1 24.0 24.0 24.0 32 32 32 46.8 46.8 DIMENSIONS (LXWXH) 33" x 26-5/8" x 76" 33" x 26-5/8" x 76" 72.5" x 24" x 54" 33" x 26-5/8" x 76" 42.5" x 30" x 79" 72.5" x 24" x 54" 42.5" x 30" x 66.75" 42.5" x 30" x 79.75" 72.5" x 24" x 54" 46-3/8" x 30" x 79.75" **Available with either 1750 or 3450 RPM. Starter not required for 5HP 3450RPM motor. Starter required for 7.5HP 3450RPM motor. APPR SHIP RV Series 101-65801 RV SERIES | 13 HP RECIPROCATING COMPRESSOR/GENERATOR • Two-stage splash lubricated RV15A compressor pump • Honda GX390 engine with electric start • Industrial 4000-watt generator with (2) 120V, 15 amp and (1) 240V, 20 amp receptacles • Twin 4-gallon horizontal air receiver tanks • Manual receiver drain valve • Lifting hook • Belt drive with totally enclosed belt guard • Gas pilot valve • Comprehensive base plate • INCLUDES: (2) Pressure gauges - the left gauge indicates tank pressure and the right gauge indicates output pressure; adjustable pressure regulator; pressure relief valve, air socket 101-73904 GAS CONTINUOUS ASCOT NO. MFG. NO. PART. NO. ENGINE MODEL 101-73904 HGRV7-LPH-G CC1153480 HONDA GX390 HP 13 TANK CAP. (GAL) (2) 4 PUMP MFG NO. RV-15A GENERATOR WITH COMP OFF-LOAD 3500 watts MAX. AC OUTPUT 4000 watts CFM RPM 784 DISPL. 22.9 175 PSI RATING* RATING CFM DEL’Y 17.9 DIMENSIONS (LXWXH) 46" x 22" x 35" APPROX. SHIP WEIGHT (LBS.) 490 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS
AIR SYSTEMS 18 Revolution REVOLUTION: QUIET ENCLOSED RECIPROCATING AIR COMPRESSORS • Sound levels as low as 63dBA • 12-gauge steel enclosure • Large cooling fan with open cabinet design promotes cooling air flow and ease of maintenance • Separate inner base reduces vibration and noise • Oil-site gauge and filter maintenance indicator provide notification of routine maintenance • Innovative Belt-tensioning system • Oversized air cooled aftercooler standard on the package LOW SOUND LEVELS ASCOT NO. MFG. NO. 101-58000 HQR5-8 101-78000 HQR7F-8 HP 5 7.5 TANK CONFIG. Horiz. Horiz. LONG LIFE TANK CAP. (GAL.) 80 80 PUMP MFG. NUMBER R15 R15 734 990 RPM APPROX. SHIP WEIGHT (LBS.) 1285 Lbs. 1312 Lbs. 101-58000 RECIP AIRSTATION PACKAGES • R-Series Airstations offer the customer the ability to purchase a complete plug-n-play reciprocating compressor package with a mounted refrigerated air dryer • Available on 2hp-15hp simplex, horizontal tank mount packages • Standard installed features included XCNC non-cycling refrigerated dryer, 3 way bypass valve, pre-filter, air cooled aftercooler, mounted control panel, low oil stop control, and electronic automatic tank drain 101-30691 ASCOT NO. 101-30691 101-30692 101-30693 101-30694 101-30695 101-30696 101-30697 101-30698 101-30699 101-30700 101-30701 101-30702 101-30703 101-30704 101-30705 101-30706 MFG. NO. HR5-8 HR5-8 HR5-8 HR5-8 HR5-8 HR7F-8 HR7F-8 HR7F-8 HR7F-8 HR7F-8 HR10-12 HR10-12 HR10-12 HR15F-12 HR15F-12 HR15F-12 PART NO. R2-30A-S691 R2-30A-S692 R2-30A-S693 R2-30A-S694 R2-30A-S695 R2-30A-S696 R2-30A-S697 R2-30A-S698 R2-30A-S699 R2-30A-S700 R2-30A-S701 R2-30A-S702 R2-30A-S703 R2-30A-S704 R2-30A-S705 R2-30A-S706 PUMP MFG. R15 R15 R15 R15 R15 R15 R15 R15 R15 R15 R30 R30 R30 R30 R30 R30 VOLTS 208/1 230/1 208/3 230/3 460/3 208/1 230/1 208/3 230/3 460/3 208/3 230/3 460/3 208/3 230/3 460/3 TANK CAPACITY (GAL.) 80 80 80 80 80 80 80 80 80 80 120 120 120 120 120 120 175 PSI RATING CFM DEL'Y 17.0 17.0 17.0 17.0 17.0 22.3 22.3 22.3 22.3 22.3 33.8 33.8 33.8 48.7 48.7 48.7 RPM 737 737 737 737 737 949 949 949 949 949 718 718 718 1034 1034 1034 DIMENSIONS (LxWxH) 75x35x50 75x35x50 75x35x50 75x35x50 75x35x50 75x35x50 75x35x50 75x35x50 75x35x50 75x35x50 83x36x55 83x36x55 83x36x55 83x36x55 83x36x55 83x36x55 APPROX. SHIP WEIGHT (LBS.) 780 780 780 780 780 855 855 855 855 855 1071 1071 1071 1178 1178 1178 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS
19 AIR SYSTEMS L-SERIES Rotary Screw Air Compressors The Champion L-Series Rotary Screw Compressors are highly competitive, expertly-designed packages that use the latest design techniques to give you industry-leading reliability, performance, and value. When used in 100% duty cycle applications, Rotary Screw compressors from Champion are a great, quiet alternative to a reciprocating compressor. STANDARD FEATURES: • Advanced but simple package design lowering maintenance and service costs and lengthening service life • Belt-driven • Integrated Airends ensure superior serviceability • Available in fixed and variable speed • State-of-the-art dual position pilot controller • High-quality, sound 105-00750 Refrigerated Air Dryers REFRIGERATED AIR DRYERS - SPECIAL FEATURES: • Effective moisture removal at all flow rates • Optional pre and post filtration available for dryer ASCOT NO. MFG. NO. 105-00015 105-00025 105-00035 105-00050 105-00075 CGD15A1 CGD25A1 CGD35A1 CGD50A1 CGD75A1 105-00100 CGD100A1 105-00125 CGD125A1 105-00150 CGD150A1 • Ideal for air compressors equipped with an air cooled aftercooler FLOW VOLTAGE 15 25 35 50 75 100 125 150 115/1 115/1 115/1 115/1 115/1 115/1 115/1 115/1 IN/OUT CONNECT. 3/8" OD 3/4" 3/4" 3/4" 1" 1" 1" 1" SIZE (LXWXH) 15x13x13 22x16x15 22x16x15 22x20x20 24x15x33 24x15x33 24x15x33 24x15x37 APPROX. SHIP WEIGHT (LBS.) 69 88 92 101 123 129 135 148 -insulating enclosure panels • Low-noise, thermostatically-controlled, motor-driven fan • Tank or basemount with optional dryer configurations (AirStation) • Zero air-loss auto tank drain on Air Station • L- SERIES WARRANTY: Standard one-year warranty on package, premium ten-year warranty available 101-71023 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS
AIR SYSTEMS 20 LV/LVR-Series Rotary Vane Air Compressors LV-Series: Duplex LV-Series: Simplex CHAMPION MAINTENANCE PARTS CHAMPION VOLTAGE CONVERSION KITS • If 460V, 3 phase service is needed voltage conversion kits are available ASCOT NO. MFG. NO. 106-28530 106-89090 106-94730 117-05050 117-05051 106-11882 M2853 P08909A P09479A P05050A P05051A Z11882 106-11883 106-11884 106-13194 106-00519 Z11883 Z11884 CC1031194 M519C DESCRIPTION Pilot Unleader Valve for Gas Compressors Champion Oil, 1-Gallon Champion Oil, 1-Quart Filter Element for Gas and Small Electric Units Filter Element for Large Electric Units Compressor Service Kit for RV-15/R-15 Pump INCLUDES: Lubricant, Air Filters & Oil Filter Compressor Service Kit for RV-30/R-30 Pump INCLUDES: Lubricant, Air Filters & Oil Filter Compressor Service Kit for R-40 Pump INCLUDES: Lubricant, Air Filters & Oil Filter Engine Maintenance Kit for 13 HP Gas Compressors Replacement 1/4 NPT Gauge for Compressors 106-11727 ASCOT NO. MFG. NO. 106-11727 106-11728 106-11729 106-11730 DESCRIPTION TEN011727 TEN011728 TEN011729 TEN011730 Voltage Conversion Kit, Simplex – 5HP and 7.5HP from 230V/3 Phase to 460V/3 Phase Voltage Conversion Kit, Simplex – 10HP from 230V/3 Phase to 460V/3 Phase Voltage Conversion Kit, Simplex – 15HP from 230V/3 Phase to 460V/3 Phase Voltage Conversion Kit, Simplex – 25HP from 230V/3 Phase to 460V/3 Phase WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS
21 AIR SYSTEMS C-Aire Compressors C-AIRE SIMPLEX COMPRESSORS • Oversized after coolers remove over 60% of water vapor, humidity or moisture • Large displacement 3-cylinder pumps run slower thus increasing the longevity and contributes to them being quieter • ALL UNITS INCLUDE: Ball valve, tank drain, oil drain tube, full synthetic oil, large sight glass and liquid fill gauge • Installation kit only included with Fully Packaged units (4 mounting pads, 4 anchor bolts, 12" steel braided flex hose) SIZING A COMPRESSOR APPLICATION GUIDE 101-75080 ASCOT NO. MFG. NO. HP STAGE 101-50080 A050V080-1230 5 101-75080 A075V080-1230 7.5 2 2 CFM @175 PSIG 17 24 PUMP 2 Cylinder Cast Iron 3 Cylinder Cast Iron PUMP RPM 885 649 MAIN BEARINGS 50,000 Hours 50,000 Hours OIL Full Synthetic Full Synthetic VOLTS 208/230, 1 Phase 208/230, 1 Phase AMPS 21@208V, 19.1@230V 33.3@208V, 31.3@230V MOTOR RPM BREAKER SIZE 1745 40 Amp 1760 50 Amp TANK SIZE (GAL.) 80 80 DIMENSIONS (LXWXH) 35" x 24" x 70" 34" x 24" x 73" WT. (LBS.) 515 625 C-AIRE GAS ENGINE COMPRESSOR • Two-Stage compressor that is just the right size for a service truck using a 1" or 3/4" impact wrench and is great for farm service use • INCLUDES: Ball valve, Honda engine, electric start, engine idle down, oil drain tube, tank drain, large displacement 3 cylinder pumps, large oil sight glass, liquid filled gauge, full synthetic oil & mounting pads GAS ENGINE TWO STAGE 102-13030 ASCOT NO. 102-13030 MFG. NO. A130H030-G HP 13 STAGE CFM @175 PSIG 2 26 PUMP 3 Cylinder Cast Iron PUMP RPM MAIN BEARINGS 50,000 Hours 745 OIL Full Synthetic MOTOR RPM 800 TANK SIZE (GAL.) 30 DIMENSIONS (LXWXH) 42" x 17" x 45" WT. (LBS.) 474 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS
AIR SYSTEMS 22 NITROGEN PERCENTAGE INDICATOR Branick Nitrogen Inflation Systems BRANICK 130 NITROGEN INFLATION SYSTEM 119-00011 • Accurate and easy to use • Compact and ergonomic in design • Simple to operate, one button design • Battery charge indicator • Auto-power off function • Replaceable battery and sensor • Auto diagnostic with error code to simplify troubleshooting ASCOT NO. 119-00011 MFG. NO. Nitro-1 DESCRIPTION Nitrogen Purity Gauge The MODEL 130 can be used with a nitrogen bottle or connected to a nitrogen generator to inflate up to 6 (4 hoses included) tires with high purity nitrogen. The integrated auto-inflator has a pressure range up to 145 psi and performs top-offs as well as automated nitrogen conversions, just set the pressure and the inflator does the rest. Branick equipment lasts and our Model 130 is no different, with all steel construction to take everyday use. The rechargeable battery has a visible charging indicator to let you know when you’re ready to go. The mobility and features of the Model 130 make nitrogen service simple, fast and economical. • Hands Free Auto-inflator • Convert up to 6 tires (requires 2 optional hoses) • Rechargeable battery with indicator • Convenient parts tray • Durable all-steel construction 119-00485 ASCOT NO. 119-00485 MFG. NO. 485 DESCRIPTION Branick 485 Nitrogen Inflation System VALVE CAPS FOR NITROGEN INFLATED TIRES BRANICK 485 NITROGEN INFLATION SYSTEM 468-00207 ASCOT NO. MFG. NO. 468-00207 Cap PG 468-00307 468-00607 468-10100 468-17492 468-20695 TS-OR NITSLV VC10 17-492LG 20695 DESCRIPTION Green Plastic Nitrogen Cap Green Valve O-ring Nitrogen Sleeve Blue Plastic Nitrogen Caps (100/Box) Green Plastic Cap for Long Sleeve TPMS Snap-in Valves Green Plastic Nitrogen Cap with Long Skirt for 20008 Snap-in TPMS Valve (100/Box) 468-26541 468-43607 468-59019 468-59021 6541N-2 436075 59-0019 59-0021 Dill Double Seal Cap with Green Sleeve High Quality Green Stamped Chrome Aluminum Nitrogen Valve Cap (100/Box) Chrome Nitrogen Valve Cap (100/Box) 468-43607 468-10100 468-59019 468-00607 468-00307 • The 485 is totally automatic and completely mobile, enabling the operator to wheel the unit directly to any vehicle • Zero installation costs • No electrical requirements to operate • Industrial grade HD battery • Efficient membrane • Low maintenance cost • Connect to any air-line and you’re inflating tires. Plug and Play! OT NO. 119-00130 MFG. NO. 130 DESCRIPTION Branick 130 Nitrogen Inflation System WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS
23 AIR SYSTEMS ELECTRIC AUTOMATIC COMPRESSOR DRAIN AUTOMATIC COMPRESSOR DRAIN • Automatically drains filters, compressor tanks, drip legs, aftercoolers and receivers • Opens and closes valve in 1 to 60 minute cycle times and 1 to 30 second blow down time • 1/4" NPT connection • Includes Y-strainer ASCOT NO. 117-05702 MFG. NO. 5702S DESCRIPTION Electric Automatic Compressor Drain MINI IN-LINE DISPOSABLE DESICCANT DRYER • Point-of-use, patented, disposable, mini in-line desiccant dryer removes water vapor, oil vapor and dirt • Point-of-use on blow guns or spray guns as final protection for critical parts during blow off and paint spraying • See-through housing shows desiccant bead color change from blue to pink indicating dryer needs to be replaced • 1/4" NPT connection ASCOT NO. 117-00010 MFG. NO. DFD-10 DESCRIPTION QTY. Disposable Desiccant Dryer 2 117-00010 HOW TO DETERMINE THE GALLONS OF WATER ACCUMULATED PER 8 HOURS OF USE Follow the steps below to determine the gallons of water accumulated by a compressed air system per 8 hours of use: 1. Determine the ambient temperature (outside temperature surrounding the dryer) and relative humidity. 2. Locate ambient temperature in first column of water factor chart. 3. Follow the row over to percent of humidity. This indicates the number of gallons accumulated by your air compressor in an 8-hour period. 4 Select the SCFM requirement for your dryer based on the SCFM coming out the air compressor 5 Once the correct HP rating has been selected based on the air volume requirements, you will need to know the type of available electric service to determine the need for a single phase or three phase compressor. Ambient Air Temperature 120°F 110°F 100°F 90°F 80°F 70°F 60°F 50°F 40°F 30°F 20°F 10°F 20% Humidity 18.6 14.1 10.5 7.8 5.7 3.9 2.7 2.1 1.2 .9 .6 .3 30% Humidity 27.9 21.0 15.6 11.4 8.4 6.0 4.2 3.0 2.1 1.2 .9 .5 40% Humidity 50% Humidity 46.5 35.1 26.1 19.2 13.8 9.9 6.9 4.8 3.3 2.1 1.5 .8 60% Humidity 55.8 42.0 31.2 23.1 16.8 12.0 8.4 6.0 3.9 2.7 1.7 1.0 70% Humidity GALLONS OF WATER PER 8 HOURS @ 100 SCFM 37.2 27.9 20.7 15.3 11.1 7.8 5.7 3.9 2.7 1.8 1.2 .7 65.1 48.9 36.6 26.7 19.5 13.8 9.9 6.9 4.8 3.0 1.9 1.2 80% Humidity 74.4 55.8 41.7 30.6 22.2 15.9 11.1 7.8 5.4 3.6 2.1 1.4 90% Humidity 83.7 63.0 46.8 34.5 24.9 18.0 12.6 8.7 6.0 3.9 2.4 1.5 100% Humidity 93.0 69.9 52.2 38.4 27.9 19.8 14.1 9.9 6.6 4.5 2.7 1.8 Water factor chart number is 31.2 Compressed air system accumulates 31.2 gallons of water per 8 hours of use. EXAMPLE: 25HP air compressor delivers 100 SCFM. Ambient Temp. = 100°F Relative Humidity = 60% IN-LINE AIR TOOL FILTER • In-line filter protects air tools from dirt and debris • 1-9/16" length, 1/2 oz. • 40 micron sintered bronze element • Inlet can be attached directly to pneumatic tools • 1/4" male x 1/4" female NPT ASCOT NO. 117-09132 MFG. NO. 9132 DESCRIPTION In-Line Air Tool Filter 117-09132 ASCOT NO. 117-05304 MFG. NO. DESCRIPTION T53-04W Automatic Drain 117-05304 117-05702 • Automatically expels liquids from piping network in compressed air systems • Use in low spots in an air system where water accumulates • Float type drain features a protective stainless steel screen with umbrella baffle, providing large sump area for oil, sludge and dirt • 1/2" NPT top threaded port BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS
AIR SYSTEMS 24 Filters and Regulators FILTER/REGULATOR COMBINATION UNITS • Combines filter and pressure regulator into one space saving unit • Output performance equal to an individual filter and regulator • Reduced pressure outputs of 0-125 PSIG • FEATURES THREE POSITION NON-RISING KNOB: push to lock, pull to adjust, detach to make tamper resistant • Available in metal bowl or polycarbonate bowl with metal bowl guard A GOOD FILTRATION SYSTEM APPLICATION GUIDE 114-75301 ASCOT NO. 114-75200 114-75201 114-75202 114-75203 114-75300 114-75301 114-75302 114-75303 114-00754 114-75400 114-75401 114-75402 114-75403 MFG. NO. B752T B752WT B752FW B752Z B753T B753WT B753FW B753Z B754GW B754T B754WT B754FW B754Z PIPE SIZE 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" ADJUSTMENT TYPE T-Handle T-Handle Knob Knob T-Handle T-Handle Knob Knob Knob T-Handle T-Handle Knob Knob MAX. FLOW SCFM 50 50 50 50 80 80 80 80 100 100 100 100 100 *NOTE: Gauge not included. Sold separately. Ascot part number indicated. BOWL CAPACITY 5 Oz. 6 Oz. 6 Oz. 5 Oz. 5 Oz. 6 Oz. 6 Oz. 5 Oz. 6 Oz. 5 Oz. 6 Oz. 6 Oz. 5 Oz. BOWL TYPE Poly Metal Metal Poly Poly Metal Metal Poly Metal Poly Metal Metal Poly DRAIN Manual Manual Float Auto Piston Auto Manual Manual Float Auto Piston Auto Manual Manual Manual Float Auto Piston Auto GAUGE PART NO. 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* Included 117-01481* 117-01481* 117-01481* 117-01481* OPERATING TEMP. 40-125°F 40-175°F 40-125°F 40-125°F 40-125°F 40-175°F 40-125°F 40-125°F 40-175°F 40-125°F 40-175°F 40-125°F 40-125°F MAX. PRESSURE 150 PSIG 250 PSIG 175 PSIG 150 PSIG 150 PSIG 250 PSIG 175 PSIG 150 PSIG 250 PSIG 150 PSIG 250 PSIG 175 PSIG 150 PSIG MODULAR UNITS • UNITS INCLUDE: A filter, regulator and lubricator and/or filter, regulator and oil removing filter • Units equipped with or without OSHA safety lock-out valves • Gauge included • Screwdriver only tool needed to connect or disconnect units • Insert interlocking feature allows simple installation in any location 114-03354 ASCOT NO. 114-03352 114-13352 114-03353 114-13353 114-03354 114-13354 MFG. NO. C33352W VC33352W C33353W VC33353W C33354W VC33354W PIPE SIZE 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" MAX. FLOW SCFM 100 100 100 100 100 100 BOWL CAPACITY 6 Oz. 6 Oz. 6 Oz. 6 Oz. 6 Oz. 6 Oz. BOWL TYPE Metal Metal Metal Metal Metal Metal DRAIN Manual Manual Manual Manual Manual Manual LOCKOUT DRAIN Not Included Included Not Included Included Not Included Included OPERATING TEMP. 40-175°F 40-175°F 40-175°F 40-175°F 40-175°F 40-175°F MAX. PRESSURE 250 PSIG 250 PSIG 250 PSIG 250 PSIG 250 PSIG 250 PSIG WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS
25 AIR SYSTEMS GENERAL PURPOSE FILTERS • Removes harmful water condensate, pipe scale, dirt and rust from your compressed air system • Prevents corrosive damage to compressed air equipment and finished products • Protects components and air tools from premature failure • Installed upstream of regulators to prevent valve failure • Also used as pre-filters to oil removing and coalescing filters to ensure high efficiency and long element life in applications such as paint spraying, instrumentation and pharmaceuticals • Porous sintered bronze element 111-30002 ASCOT NO. 111-30002 111-35200 111-35201 111-35202 111-35203 111-35300 111-35301 111-35302 111-35303 111-35400 111-35401 111-35402 111-35403 111-37600 111-37601 111-32908 111-32910 111-32912 MFG. NO. F300-02 F352 F352W F352Z F352FW F353 F353W F353Z F353FW F354 F354W F354Z F354FW F376W F376FW F329-08 F329-10W F329-12W PIPE SIZE 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 1" 1-1/4" 1-1/2" MAX. FLOW SCFM 27 48 48 48 48 75 75 75 75 100 100 100 100 230 230 300 400 425 BOWL CAPACITY 1 Oz. 5 Oz. 6 Oz. 5 Oz. 6 Oz. 5 Oz. 5 Oz. 6 Oz. 6 Oz. 5 Oz. 6 Oz. 5 Oz. 6 Oz. 10 Oz. 10 Oz. 29 Oz. 29 oz. 29 oz. BOWL TYPE Poly Poly Metal Poly Metal Poly Metal Poly Metal Poly Metal Poly Metal Metal Metal Metal Metal Metal DRAIN Manual Manual Manual Piston Auto Float Auto Manual Manual Piston Auto Float Auto Manual Manual Piston Auto Float Auto Manual Float Auto Manual Manual Manual 111-35201 OPERATING TEMP. 40°-125°F 40°-125°F 40°-160°F 40°-125°F 40°-120°F 40°-125°F 40°-160°F 40°-125°F 40°-120°F 40°-125°F 40°-160°F 40°-125°F 40°-120°F 40°-160°F 40°-120°F 40°-160°F 40°-160°F 40°-160°F MAX. PRESSURE 150 PSIG 150 PSIG 250 PSIG 150 PSIG 175 PSIG 150 PSIG 250 PSIG 150 PSIG 175 PSIG 150 PSIG 250 PSIG 150 PSIG 175 PSIG 250 PSIG 175 PSIG 250 PSIG 250 PSIG 250 PSIG 111-32908 FILTER ELEMENT 20 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron COALESCING/OIL REMOVING FILTERS • Removes submicron particles, particularly oil • APPLICATIONS INCLUDE: Paint spraying, pneumatic control instrumentation, printing and protection of air bearings • For maximum efficiency, a pre-filter needs be to installed upstream of oil-removing filter • Bonded end seals eliminate aerosol leakage past the element • Inner and outer support ribs are chemical resistant and strengthen element structure • Drain layers allow filtered elements to drop to bottom of filter with barrier to prevent reentry of drops to downstream air 115-55301 ASCOT NO. 115-55200 115-55201 115-55300 115-55301 115-55400 115-55401 115-57601 115-50508 115-50810 115-50812 MFG. NO. F552FW F552W F553FW F553W F554FW F554W F576W F508-08W F508-10W F508-12W PIPE SIZE 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 1" 1-1/4" 1-1/2" MAX. FLOW SCFM 24 24 37 37 37 37 60 300 300 400 BOWL CAPACITY 6 Oz. 6 Oz. 6 Oz. 6 Oz. 6 Oz. 6 Oz. 10 Oz. 29 Oz. 60 Oz. 60 Oz. BOWL TYPE Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal DRAIN Float Auto Manual Float Auto Manual Float Auto Manual Manual Manual Manual Manual OPERATING TEMP. 40°-120°F 40°-160°F 40°-120°F 40°-160°F 40°-120°F 40°-160°F 40°-160°F 40°-160°F 40°-160°F 40°-160°F 115-57601 MAX. PRESSURE 175 PSIG 250 PSIG 175 PSIG 250 PSIG 175 PSIG 250 PSIG 250 PSIG 250 PSIG 250 PSIG 250 PSIG FILTER ELEMENT .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS
AIR SYSTEMS 26 Regulators and Lubricators REGULATORS • Specialized control valve reduces upstream supply pressure level to a specified constant downstream pressure • Regulates air pressure of the airline • Self-relieving style units • Available in T-handle or adjustment knob • Adjustment knob features three position non-rising knob: push to lock, pull to adjust, detach to make tamper resistant • Reinforced diaphragm for repeated accuracy 112-00378 ASCOT NO. 112-00162 112-00262 112-00352 112-00353 112-00354 112-00376 112-00378 112-03910 112-03912 112-01352 112-01354 MFG. NO. R162 R262** R352 R353 R354T R376T R378T R3910 R3912 R352T R354GH PIPE SIZE 1/4" 1/4" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" MAX. FLOW SCFM 25 25 50 80 100 220 250 700 700 ADJUSTMENT TYPE Adjustment Knob Adjustment Knob Adjustment Knob Adjustment Knob T-Handle T-Handle T-Handle T-Handle T-Handle PRESSURE GAUGE PART NO. 117-01681* 117-01681* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 112-00352 GAUGE PART 1/8" NPT 1/8" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT 1/4" Regulator - T-Handle 1/2" High Pressure Regulator - 10 to 250 PSI 112-00262 OPERATING TEMP. 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F OPERATING PRESSURE 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG LUBRICATORS • Injects a fine stream of oil into the air stream to automatically lubricate air operated tools and other devices • Extends life of downstream components • Precise control of oil feed with needle valve adjustment knob • Adds minimal pressure drop to the air system • Features three position non-rising knob: push to lock, pull to adjust, detach to make tamper resistant • High air flow • Precise visual adjustment control • Low flow to establish drip rate • “W” is with sight glass and metal bowl 113-00353 ASCOT NO. 113-00352 113-01352 113-00353 113-01353 113-00354 113-01354 113-00376 113-04108 MFG. NO. L352 L352W L353 L353W L354 L354W L376W 4108W PIPE SIZE 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 1" MAX. FLOW SCFM 16 16 82 82 142 142 142 175 BOWL CAP. 5 Oz. 5 Oz. 5 Oz. 5 Oz. 5 Oz. 5 Oz. 10 Oz. 29 Oz. BOWL TYPE Poly Metal Poly Metal Poly Metal Metal Metal OPERATING TEMP. 40°-125°F 40°-175°F 40°-125°F 40°-175°F 40°-125°F 40°-175°F 40°-125°F 40°-160°F MAX. PRESSURE 150 PSIG 200 PSIG 150 PSIG 200 PSIG 150 PSIG 200 PSIG 150 PSIG 250 PSIG 113-01353 OIL DELIVERY 2 SCFM 2 SCFM 2 SCFM 2 SCFM 2 SCFM 2 SCFM 2 SCFM 2 SCFM 117-01481 117-11481 117-01681 117-05200 1481 1481B 1681 5200 ACCESSORIES FOR FILTERS, REGULATORS & LUBRICATORS ASCOT NO. MFG. NO. 117-00055 EK55 DESCRIPTION .03 Micron Coalescing Filter Element Replacement 117-00329 117-00355 117-00935 EKF329 EK35-5 PMKR35 40 Micron Filter Element - Fits 3/4" Units 5 Micron Filter Element - Fits 1/4", 3/8" & 1/2" Units Filter/Regulator Mounting Kit 1/4" Back Mount Gauge 1/4" Back Mount Gauge - 0-300 PSI 1/8" Back Mount Gauge Internal Drain Assembly WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS
27 AIR SYSTEMS Hose Reels PREMIUM INDUSTRIAL HOSE REELS • Compact design allows reels to fit into tight locations • Corrosion resistant powder coated paint • Extended service life due to permanently lubricated bearings and swivels • Versatile applic include easy mounts on w floor, ceiling or truck • Air Water hose included • MADE IN THE USA MADE IN THE USA • Compact design • Substantial support • Air/Water (OLP), Oil (OMP) or Grease (OHP) • All-steel construction with engineered ribs/forms • Baked-on powder coat finish provides corrosion resistance • MADE IN THE USA ASCOT NO. 124-04435 125-04625 125-05450 125-05635 125-05650 126-05850 MFG. NO. 4435 OLP 4625 OLP 5450 OLP 5635 OLP 5650 OLP A5850 OLP HOSE ID 1/4" 3/8" 1/4" 3/8" 3/8" 1/2" HOSE OD .475 .600 .475 .600 .600 .750 HOSE LENGTH 35' 25' 50' 35' 50' 50' HOSE PSI 300 300 300 300 300 300 TEMP. 150˚F 150˚F 150˚F 150˚F 150˚F 150˚F ASCOT NO. 125-07650 125-07670 126-07850 125-07651 126-07851 124-07450 125-07652 MFG. NO. 7650 OLP 7670 OLP 7850 OLP 7650 OMP 7850 OMP 7450 OHP 7650 OHP RT SERIES HOSE REELS • Adjustable guide arm locates to seven positions • Oversized main shaft increases support • Long life drive spring • Easy to mount due to slotted mounting holes for safer and easier installation • Air/Wat hose included • Models RT650OLPG and RT850-OLPG specific designed for dispensing nitr ASCOT NO. 124-04500 125-06350 125-06500 126-08500 MFG. NO. RT450-OLP RT635-OLP RT650-OLP RT850-OLP HOSE ID 1/4" 3/8" 3/8" 1/2" HOSE OD .475 .600 .600 .750 HOSE LENGTH 50' 35' 50' 50' HOSE PSI 300 300 300 300 MADE IN THE USA DUAL PEDESTAL HOSE REELS • Compact dual pedestal design • Features an innovative, non-welded, interlocking base • Stand up to heavy vibration, ideal f truck-mounted applications • Dual pedestal base and guide arm are structurally reinforc • All-steel construction and baked-on powder coat finish • MADE IN THE USA TEMP. 150˚F 150˚F 150˚F 150˚F ASCOT NO. 124-75435 124-75450 125-75635 125-75650 125-77650 126-75835 126-77850 MFG. NO. DP5435 OLP DP5450 OLP DP5635 OLP DP5650 OLP DP7650 OLP DP5835 OLP DP7850 OLP HOSE ID 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" HOSE OD .475 .475 .600 .600 .600 .750 .750 HOSE LENGTH 35' 50' 35' 50' 50' 35' 50' HOSE PSI 300 300 300 300 300 300 300 HOSE ID 3/8" 3/8" 1/2" 3/8" 1/2" 1/4" 3/8" HOSE OD .600 .600 .750 .690 .820 .580 .730 HOSE LENGTH 50' 70' 50' 50' 50' 50' 50' HOSE PSI 300 300 300 HEAVY DUTY INDUSTRIAL REELS MADE IN THE USA TEMP. 150˚F 150˚F 150˚F 2600 210˚F 3000 210˚F 5000 210˚F 4800 210˚F MADE IN THE USA TEMP. 150˚F 150˚F 150˚F 150˚F 150˚F 150˚F 150˚F BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS
AIR SYSTEMS 28 HEAVY DUTY MOBILE BASE HOSE REELS • Designed to accommodate up to 100' of 3/8" I.D. hose or 75' of 1/2" I.D. hose • Slightly more robust than the standard 7000 series hose reels • The heavy duty base design, all steel construction and a baked-on powder coat finish combine to produce a rugged, corrosion-resistant product • A newly redesigned latching mechanism provides longer servic of the latch components • The-one piec guide roller design and stainles offer greater strength and easier servic ty • The high quality, die cast aluminum hub and two sealed ball bearings produce a smoother spool rotation and easier operation • MADE IN THE USA ASCOT NO. 125-76050 125-76070 125-76075 125-76100 126-78050 126-78075 MFG. NO. HD76050 OLP HD76070 OLP HD76075 OLP HD76100 OLP HD78050 OLP HD78075 OLP HOSE ID 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" HOSE OD .600 .600 .600 .600 .750 .750 HOSE LENGTH 50 70 75 100 50 75 HOSE PSI 300 300 300 300 300 300 MADE IN THE USA HEAVY DUTY MOBILE BASE HOSE REELS • The centrifugal clutch, integral to the reel base, greatly decelerates the hose retraction speed by up to 83% vs. a Series 7000 reel • Retracts at 2 miles per hour – designed to match the average human walking speed of 2 to 3 miles per hour • Integral clutch creates a consistent retraction speed regardless of fluid or environmental temperatures • Safely protects personnel and equipment • Requires no field adjustment •MADE IN THE USA ASCOT NO. 125-07850 TEMP. 150° F 150° F 150° F 150° F 150° F 150° F MADE IN THE USA GENERAL INDUSTRIAL AIR/WATER • Full flow swivel and heavy gauge steel frame • Allbolted unitized construction with no welds to fatigue • Hand Crank (CA) and 12VDC Electric Motor (EA) driven • MADE IN THE USA ASCOT NO. 126-21120 126-21121 126-31120 126-31121 126-31180 MFG. NO. CA32112 L EA32112 L12D CA33112 L EA33112 L12D CA33118 L HOSE ID 1/2” 1/2” 3/4” 3/4” 3/4” ADJUSTABLE BUMPER STOPS ASCOT NO. • Solid molded rubber assuring long life and nonslip grip • Allow desired length of hose or cord to be permanently stored outside the reel ASCOT NO. 127-11004 127-11043 127-21043 127-11040 MFG. NO. 1-HR1004 1-HR1004-3 2-HR1004-3 1-HR1004-A DESCRIPTION 3/8" Hose, 2.5" Diameter 3/8" Hose, 3" Diameter 1/2" Hose, 3" Diameter 1/4" Hose, 2.5" Diameter 312-45454 312-45455 L 4545 123 9 L 4545 123 9G 312-40503 312-45453 MFG. NO. L 4050 163 3 L 4545 123 3 HOSE OD .750 .750 1.075 1.075 1.075 HOSE LENGTH 200’ 200’ 100’ 100’ 175’ PSI 1000 1000 1000 1000 1000 WIRE SIZE AWG NO. OF WIRES SINGLE OUTLET 16 12 TRIPLE OUTLET 12 12 312-40504 L 4050 163 10 (LED) LED 16 3 3 3 3 3 CORD LENGTH 50' 45' 45' 50' 50' VOLTS 125 125 125 125 125 MAX. AMPS 13 15 15 15 13 • For indoor, non-weather-tight applications only • All models UL listed at 125 volt 60 hz single phase; reels without cord suitable for 220 volt • Incandescent bulb 75 watt maximum • Cord Included • MADE IN THE USA MADE IN THE USA 125-07670 125-07650 125-07925 126-07450 126-07650 MFG. NO. RS7850 OLP RS7670 OLP RS7650 OLP RS7925 OLP RS7450 OHP RS7650 OHP HOSE ID 0.5 0.38 0.38 0.75 0.25 0.375 CORD REELS OPEN STYLE HOSE OD 0.75 0.6 0.6 1.075 0.58 0.73 HOSE LENGTH 50 ft 70 ft 50 ft 25 ft 50 ft 50 ft HOSE PSI 300psi 300psi 300psi 250psi TEMP. 150F 150F 150F 150F 5000psi 210F 4800psi 210F MADE IN THE USA WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS
29 AIR SYSTEMS EZ-COIL HI-VIS HOSE REEL • EZ-Coil controlled retraction speed up t 80% slower for greater safety • Hybrid (P + Rubber blend) bright yellow hose with a white glossy stripe for superior visibilit • Increased hose flexibility, enhanc resistance, and reduced coil memory • High quality epoxy powder coated s construction • Sturdy 1" solid steel a with 1" self-lubricated precision bearings • Steel base plate and support pos stiffness reducing vibration • Multi-position guide arm adjusts to 10 different moun positions • SH models - Single pedes features Coxreels’ exclusive Super Hub™ dual axle support system • Enclosed f tuned and matched cartridge-style spring motor • External fluid path with machined from solid brass 90° full-flow NPT s with nitrile seals • MADE IN THE U ASCOT NO. 125-03500 125-03501 125-03750 125-04500 125-04501 125-04750 MFG. NO. EZ-P-LP-350-HV EZ-SH-350-HV EZ-SH-375-HV EZ-P-LP-450-HV EZ-SH-450-HV EZ-SH-475-HV HOSE ID 3/8" 3/8" 3/8” 1/2” 1/2” 1/2” LOW PRESSURE HOSE REELS FOR AIR AND WATER • High quality epoxy powder coated steel construction • Sturdy 1" solid st axle with 1" self-lubricated precision bearings • Steel base plate and support post add stiffness reducing vibration • Multi-position guide arm adjusts to 10 different mounting positions • 8-position locking ratchet secures hose at desir length • Self-retracting spring return r • Factory balanced cartridge-style spring motor provides safe maintenance • Solid brass NPT swivel with stainless steel stud bolts to reel • MADE IN THE U.S.A. ASCOT NO. 124-13500 124-15000 124-33500 125-35004 126-42500 126-43500 126-45000 126-52500 BUYER'S GUIDE MFG. NO. P-LP-135 P-LP-150 P-LP-335 P-LP-350 P-LP-425 SH-N-435 SH-N-450 SH-N-525 HOSE ID 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" HOSE OD 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" 1-1/16" ASCOT SUPPLY CORPORATION HOSE LENGTH 35' 50' 35' 50' 25' 35' 50' 25' HOSE PSI 300 300 300 300 300 300 300 300 HOSE OD 5/8" 5/8" 5/8” 3/4” 3/4” 3/4” HOSE LENGTH 50' 50' 75’ 50’ 50’ 75’ MADE IN THE USA SERIES LOW PRESSURE HOSE REELS eels ideally suited for plant enance, service trucks ther industrial functions tandard hose for air and er • Single set screw ess spring casing e spring mechanism ted for life • One ombination latch, spring arbor, main bearing and spool support for fewer ving parts • Durable powder ed finish • MADE IN THE US 125-35000 OT NO. HOSE PSI 300 300 300 300 300 300 125-35000 125-55000 MFG. NO. LC-350 LC-550 OPERATING PRESSURE 300 PSI 300 PSI HOSE ID 3/8" 1/2" HOSE LENGTH 50' 50' SHIP WEIGHT 54 Lbs. 60 Lbs. MADE IN THE USA MADE IN THE USA EVOLUTION AND CLASSIC SERIES • These field-proven hose reels are preferred for general duty, automotive dealerships and independent garages • Steel base and outlet arm, provide strength and rigidity • All reels include hose, hose stop, and a 2.5' connecting hose ASCOT NO. 125-21408 125-21410 125-21215 MFG. NO. 2140-008 2140-010 2120-015 OPERATING PRESSURE 300 PSI 300 PSI 300 PSI HOSE ID 3/8" 1/2" 3/8" HOSE LENGTH 50' 30' 50' SHIP WEIGHT 44 Lbs. 46 Lbs. 60 Lbs. 125-21408 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS
AIR SYSTEMS 30 AIR HOSE REELS Air Hoses and Accessories COUPLED AIR HOSES • Reinforced with heavy duty polyester cord • 325 PSI • EPDM abrasion resistant cover • Bend restrictors both ends • Premium machined brass alloy fittings • -40° to +20O° F HEAVY DUTY MADE IN THE USA • Mounting base is slotted and roller arm has 5 positions for multiple mounting configurations.• Heavy steel construction adds durability and longer life cycles • Rubber air hose with heavy-duty crimping and spring guard ensure longevity • Automatic return via heavy-duty sealed spring with 8 locking stops, roller guide and ball stop • 300 PSI maximum pressure • Ship weight 40 lbs ASCOT NO. 125-00760 126-00761 MFG. NO. 760 761 DESCRIPTION 3/8" x 50 Air Hose Reel 1/2" x 50 Air Hose Reel COATS REPLACEMENT AIR HOSE • For use with Coats Tire Changers • 60" long x 1/4" diameter • AC-1 Euro-style chuck • All brass connectors • Swivel fitting • Equivalent to Coats 806871 ASCOT NO. MFG. NO. DESCRIPTION 127-86871 121-01225 ASCOT NO. 121-01225 121-01250 121-03825 121-03851 MFG. NO. 98101646 98101648 98101640 98101642 DESCRIPTION Coupled 1/2" x 25’ Reinforced Domestic Air Hose Coupled 1/2" x 50’ Reinforced Domestic Air Hose Coupled 3/8" x 25’ Reinforced Domestic Air Hose Coupled 3/8" x 50’ Reinforced Domestic Air Hose 1/4" BULK DOMESTIC AIR HOSE • Used in automotive, agricultural and construction applications • 1/4" ID x 325 PSI • Temp Range: -40°F to +200°F • Multi-spiral polyester yarn reinforcement makes hose easy to handle and very flexible • EPDM tube and cover resists abrasion, heat and ozone • MADE IN THE USA MADE IN THE USA ASCOT NO. MFG. NO. DESCRIPTION 127-86872 FLEXZILLA AIR HOSES • Field Repairable – Reusable anodized aircraft aluminum fittings • Extreme allweather flexibility, even in subzero temperatures (-40° to 140°F) • Won’t kink under pressure • Lightweight and easy to handle • Lays flat – no memory • Durable and abrasion-resistant outer cover • Max. working pressure at 70°F: 300 psi 127-01425 HEAVY DUTY 121-14700 ASCOT NO. 121-14700 MFG. NO. 91008400 DESCRIPTION 1/4" x 700’ Domestic Bulk Air Hose (325 PSI) Reel ASCOT NO. 127-01425 127-01450 127-03825 127-03850 127-01250 127-12100 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION MFG. NO. HFZ1425YW2 HFZ1450YW2 HFZ3825YW2 HFZ3850YW2 HFZ1250YW4 HFZ12100YW4 1/4" X 25' Flexzilla Hose 1/4" X 50' Flexzilla Hose 1/4" X 25' Flexzilla Hose 1/4" X 50' Flexzilla Hose 1/4" X 50' Flexzilla Hose 1/4" X 100' Flexzilla Hose ASCOT SUPPLY CORPORATION BUYER'S GUIDE 86872-1 60" x ¼" Hunter Replacement Air Hose (Packaged 1 per bag) HUNTER REPLACEMENT AIR HOSE • For use with Coats Tire Changers • 60" long x 1/4" diameter • European-style air chuck • All brass connectors • Packaged 1 per bag MADE IN THE USA 127-86872 86871-1 60" x ¼" Coats Replacement Air Hose (Packaged 1 per bag) MADE IN THE USA 127-86871 AIR SYSTEMS
31 AIR SYSTEMS 3/8" BLUE COIL HOSE • 25' length • 1/4" x 3/8" fittings • 150 PSI • Polyurethane tubing • Excellen resistance • Highly kink-resistan twisting or crushing • Easy to handle - 25% lighter than rubber • Made in Taiw RED HANDLED HOSE CUTTER • Powder coated aluminum body • Heat treated stainless steel cutting blade • Ø3-36 mm rubber and reinforced hose cutter 123-13825 • Locking mechanism for safe storage ASCOT NO. MFG. NO. 137-11420 A11-420 ASCOT NO. MFG. NO. DESCRIPTION 123-13825 3/8x25 25' Blue Coil Hose - 1/4" x 3/8" Fittings - 150 PSI HOSE CUTTER BLUE RECOIL AIR HOSE • Highly kink-resistant, withstands twisting or crushing • Swivel fittings • 150 PSI • Polyurethane tubing • Excellent abrasion resistance • Easy to handle: 25% lighter than rubber • Hand tool for straight, even, clean cut on heater, air conditioning and braided rubber or plastic hose up to 1-1/8" diameter ASCOT NO. MFG. NO. DESCRIPTION 137-10010 137-10011 10010 10011 BLOW GUNS • Non-restricted, full pressure performance • Sturdy, high-tech composite material • Lightweight ergonomic design • Variable air flow • 1/4" Female NPT Hose Cutter (2) High Grade Carbon S Replacement Blades 137-10010 DESCRIPTION Red Handled Hose Cutter 137-11420 123-14025 123-38050 128-72021 ASCOT NO. MFG. NO. 123-14012 123-14025 123-38050 123-38125 DESCRIPTION 1/4x1/4x1/4x12 1/4x1/4x1/4x25 1/4" Blue Recoil Air Hose - 1/4" x 1/4" Swivel Fittings (12' Length) 1/4" Blue Recoil Air Hose - 1/4" x 1/4" Swivel Fittings (25' Length) 3/8x1/4x1/4x50 3/8" Blue Recoil Air Hose - 1/4" x 1/4" Swivel Fittings (50' Length) 3/8x3/8x3/8x25 3/8" Blue Recoil Air Hose - 3/8" x 3/8" Swivel Fittings (25' Length) ASCOT NO. 128-72021 128-72022 128-72023 128-72024 128-72025 128-72023 MFG. NO. 27202OSH 27202SIL 27202PRE 27202ECR 27202MTL NOZZLE Venturi Silent Standard Air Shield Metal DESCRIPTION High-output, OSHA-compliant Quiet, OSHA Compliant Standard, non-Scratch Nozzle Unique Air Shield Nozzle Durable Metal Nozzle 128-72025 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS
AIR SYSTEMS 32 Air Line Couplers and Plugs A TYPE 1/4” LINCOLN LONG NOSE • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Interchange with Lincoln “Long Nose Series” as well as units produced by other manufacturers 131-61486 ASCOT NO. 131-61486 131-61548 131-61550 131-61551 DILL. NO. N/A 123 126 125 MILTON NO. 794 790 791 792 131-61548 AMFLO. NO. C27 C28 SCHRADER NO. COUPLERS 598392 506329 ADAPTER PLUGS CP27 CP28 700665 700664 N/A B73 L2C L3C Male Female Male Female 1/4" 1/4" 1/4" 1/4" 131-61550 ASCOT NO. PARKER NO. THREAD NPT 131-61523 131-61524 131-62523 131-61539 131-61538 D-13 D-12 785 786 D-13R D-3C D-2C 784 783 ADAPTER PLUGS CP2 CP1 700691 700735 DILL. NO. MILTON NO. AMFLO. NO. C2 C1 SCHRADER NO. COUPLERS 506079 506009 13 12 N/A 3C 2C Female Male Female Female Male 1/4" 1/4" 1/4" 1/4" 1/4" PARKER NO. THREAD NPT TYPE C 1/4” AUTOMOTIVE STANDARD (TRU-FLATE) • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Interchange with Tru-Flate 10 and 100 type series as well as units produced by other manufacturers • Maximum working pressure 300 PSI 131-61523 131-61524 131-61539 TYPE B 1/4” ARO SERIES TYPE • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Interchange with Aro 210 series as well as units produced by other manufacturers • Maximum working pressure 300 PSI D 131-61573 131-08888 ASCOT NO. 131-61526 131-61527 131-08888 131-61529 131-61528 DILL. NO. 8888 N/A Push-toConnect 8889 8891 MILTON NO. 775 776 775 778 777 SCHRADER NO. COUPLERS 506599 3525 Dill 8888 ADAPTER PLUGS 700757 700776 131-61528 ASCOT NO. AMFLO. NO. C38 C37 Push-toConnect CP38 CP37 THREAD Female Male Female Female Male NPT 131-61573 131-61574 1/4" 1/4" 1/4" 1/4" 1/4" 131-61578 131-61579 102 103 110 109 715 716 727 728 DILL. NO. MILTON NO. AMFLO. NO. C20 C21 SCHRADER NO. COUPLERS 506089 506249 ADAPTER PLUGS CP21 CP20 700677 700688 B223 N/A H2C H3C Female Male Male Female 1/4" 1/4" 1/4" 1/4" PARKER NO. THREAD NPT 1/4” INDUSTRIAL INTERCHANGE SERIES • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Interchange with Aro, Foster, Milton as well as units produced by other manufacturers • Maximum working pressure 300 PSI 131-61574 131-61579 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS
33 AIR SYSTEMS TYPE F 1/2” TRUE-FLATE SERIES • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heattreated to reduce wear on critical mating surfaces • Maximum working pressure 300 PSI 134-61543 134-61544 ASCOT NO. 134-61544 133-61563 ASCOT NO. 133-61563 133-61564 133-61471 133-61569 133-61568 133-61474 133-01855 DILL. NO. D-17 D-16 D-17R D-3F D-2F D-0F N/A MILTON NO. 1815 1816 — 1818 1817 1819 1855 133-61471 AMFLO. NO. C10 C9 C10R SCHRADER NO. COUPLERS 503140 503104 — ADAPTER PLUGS CP10 CP9 CP9-03 N/A 700725 700626 3537 1855 17 N/A N/A 3F 2F N/A N/A Female Male Female Female Male Male Male 1/2" 1/2" 1/2" 1/2" 1/2" 3/8" 1/4" 134-61552 134-61543 781 — 61-552 CPI-302 3510 510121 133-61569 134-61545 PARKER NO. THREAD NPT 134-61487 787 — C2RB C2R — 598390 MILTON NO. 779 AMFLO NO. CP12 134-61545 SCHRADER NO. 700624 DESCRIPTION Female 1/4" NPT Steel Plug (.302-32 Std.) Female 1/4" NPT Brass Coupler With Sleeve Female 1/4" NPT Steel Coupler Female 1/4" NPT Plug (.482 - 26-3/4") Male 1/4" NPT Plug (.302-32 inner & outer thread) FEMALE RECAP PLUG • Case hardened steel, plated to resist rust • MAXIMUM INLET PRESSURE: 300 PSI • MAXIMUM TEMPERATURE: 250° F • AIR FLOW: 40 SCFM • Equivalent to Milton 731 TYPE P 132-61476 3/8” AUTOMOTIVE SERIES • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Maximum working pressure 300 PSI ASCOT NO. 131-61531 MFG. NO. 731 DESCRIPTION M-Style Female Recap Plug: .305-32 HI-FLO/HVLP COUPLER 132-61478 132-61480 133-01855 • Designed for air tools and paint spray equipment • Provides up to 50% more air flow than conventional couplers • Hi-Flo couplers/plugs for use with sanders, grinders and high air usage tools • HVLP couplers for use with paint spray guns ASCOT NO. 132-61476 132-61478 132-61553 132-61554 132-61481 132-61480 132-61559 132-61558 133-01855 DILL. NO. D-15C N/A D-15C N/A D-1E D-0E D-3E D-2E MILTON NO. 1803 1804 1805 1806 1810 1809 1808 1807 AMFLO. NO. SCHRADER NO. COUPLERS C8 C7 C6 C5 502191 502181 502141 502105 ADAPTER PLUGS CP8 CP7 CP6 CP5 1855 700835 700750 700647 700752 PARKER NO. N/A N/A 15-W/BMT N/A 1E OE 3E 2E N/A THREAD NPT 135-00910 Male Female Female Male Female Male Female Male Male 1/4" 1/4" 3/8" 3/8" 1/4" 1/4" 3/8" 3/8" 1/4" ASCOT NO. MILTON NO. AMFLO NO. DESCRIPTION 135-00900 135-00910 764 765 135-00980 N/A 135-00901 135-00911 761-1 760-1 C90 C91 C98 CP90 CP91 1/4" FNPT Hi-Flo/HVLP Coupler-Brass 1/4" MNPT Hi-Flo/HVLP Coupler-Brass 1/4" FNPT Hi-Flo Coupler-Steel 1/4" FNPT Hi-Flo Plug-Steel 1/4" MNPT Hi-Flo Plug-Steel 135-00901 1/4” RETREADER SERIES BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS
AIR SYSTEMS 34 ¼” 5-IN-1 UNIVERSAL SAFETY EXHA QUICK CONNECT FEMALE COUPLER HYDRAULIC COUPLERS • High-flow hydraulic coupler, 10,000 PSI working pressure • Designed to safely bleed off air pressure before releasing the connector • Allows for safe disconnec eliminating potentially dangerous hose whip • Coupler remains connected to the plug while pressurized air is safely bled off • Constructed of heavy-duty steel which is ideal for applications requiring a durable and long lasting pneumatic coupler • Connects to all major interchanges: Industrial (M-style), High flow (v-s automotive (t-style), Aro (A-style), and Lincoln (L 135-10605 ASCOT NO. 135-10605 135-10606 MFG. NO. PVV-38-M PVV-38-F DESCRIPTION 3/8" Male Hose Half Coupler - For Hydraulic Rams 3/8" Female Ram Half Coupler - For Hydraulic Rams 135-10606 ASCOT NO. MFG. NO. 131-01750 1750BK DESCRIPTION ¼” 5-In-1 Universal Safety Exhaust Quick Connect Female Coupler RUBBER DUST COVER FOR HYDRAULIC COUPLERS HYDRAULIC QUICK CONNECT COUPLER/PLUG • 10,000 PSI maximum operating pressure • Safety sleeve lock prevents accidental disconnection • Heavy duty back-up ring prevents o-ring extrusion • Heat treated and plated steel for greater wear and corrosion resistance • Self-sealing poppet valves provide excellent high and low pressure seating • Coupler equivalent to Parker TC-371, AME TC-371 & ESCO 10626 • Plug equivalent to Parker TC-372, AME TC-372 & ESCO 10625 • Hydraulic coupler dust cap • Used to keep dirt and debris from your hydraulic coupler when not connected • Made of a durable rubber material • Equipped with a pre-slit ring to allow coupler to slide easily over the counter • Comes standard with 8' and 10' hydraulic hoses ASCOT NO. MFG. NO. 319-03732 03-RDC DESCRIPTION Rubber Dust Cover for Hydraulic C 135-12606 ASCOT NO. 135-11606 135-12606 MFG. NO. FD35-1001-0606 DESCRIPTION Hydraulic Quick Connect Coupler FD35-1002-0606 Hydraulic Quick Connect Plug ASCOT NO. COMBO COUPLER® • One coupler fits 1/4" Aro Style, 1/4" Automotive Standard and 1/4" Industrial Interchange plugs 135-61241 ASCOT NO. 135-61240 135-61241 MFG. NO. C60 C61 SCHRADER NO. — — MILTON NO. 745 746 DESCRIPTION 1/4" Series, 1/4" NPT Female 1/4" Series, 1/4" NPT Male ASCOT NO. 131-17000 131-18000 133-17030 MFG NO. 1857 1858 1859 BODY SIZE NIPPLES 1/2" 1/2" 1/2" THREAD Male Female Male NPT 1/2" 1/2" 3/8" 131-02514 131-02516 132-03716 132-03718 133-05018 133-05012 133-75112 133-75116 MFG NO. EZ-251-4FP EZ-251-6FP EZ-371-6FP EZ-371-8FP EZ-501-8FP EZ-501-12FP EZ-751-12FP EZ-751-16FP BODY SIZE FEMALE COUPLERS 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4" THREAD SIZE 1/4-18 3/4-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 PARKER E-Z TO CONNECT/ DISCONNECT COUPLING • E-Z-Mate is an exhaust type coupler designed to exhaust air pressure prior to disconnection • Valve sleeve acts as integral shut-off valve • Meets ISO 4414 requirements • Built-in sleeve-lok mechanically locks the valve sleeve 131-17000 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS
35 AIR SYSTEMS 5-GALLON PORTABLE AIR TANK • Perfect for emergency tire inflation • 125 PSI maximum pressure with manifold provides plenty of usable air for inflation tasks • 4' hose and ball foot air chuck makes it easier to get to hard to reach areas • Drain port included for regular draining to help eliminate rust and to help stop compressor generated water from flowing down the air line • Heavy duty steel gauge construction • Easyto-read steel pressure gauge • Rubber pads on feet • Powder coated finish SOLID BRASS FEMALE CROSSES • Excellent for running several air lines from a common supply hose ASCOT NO. 136-00344 136-00366 MFG. NO. 344X 366X NPT THREAD 1/4" 3/8" BRASS IN-LINE SWIVELS • Simple design is excellent to stop hoses from kinking or for use in pneumatic equipment applications 107-69102 Coming Soon! Fall 2024 ASCOT NO. 107-69102 MFG. NO. 91002ASC DESCRIPTION 5-Gallon Portable Air Tank RPG HIGH PERFORMANCE BLOW GUN KIT • Produces more air flow than standard blow guns, fits any hose with ¼” NPT thread, variable flow trigger provides precise control • Maximum working pressure 120PSI • Kit includes high performance blow gun, ultimate flow tip, rubber tip, quiet flow nozzle, 6” extension, 3” needle and reducer SOLID BRASS FEMALE TEES • Use to run two lines from a common feed ASCOT NO. 136-02344 136-02366 MFG. NO. 344R 366R NPT THREAD 1/4" Male/Female NPT 3/8" Male/Female NPT 136-02366 136-00344 ASCOT NO. MFG. NO. 128-00006 HPBGK-7 DESCRIPTION ASCOT NO. 136-01344 136-01366 RPG 7-Piece High Performance Blow Gun Kit SOLID BRASS SWIVEL STANDARD BLOW GUN • Compact blo-gun with safety & rubber tip 136-34490 ASCOT NO. 128-20000 MFG. NO. 148 DESCRIPTION Blow-Gun 128-20000 ASCOT NO. 136-34490 MFG. NO. 660 NPT THREAD 1/4" Male/Female Swivel • Simple design is excellent to stop hoses from kinking or for use in pneumatic equipment applications MFG. NO. 655 655-1 NPT THREAD 1/4" 3/8" 136-01366 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS
AIR SYSTEMS 36 Hose Adapters and Fittings UNISWIVELS • Features a full 360° swivel to keep hose from twisting when using air operated tools and while paint spraying REUSABLE HOSE REPAIR FITTINGS • Makes air tight connection without using hose clamps • Must closely match hose OD (outer diameter) and ID (inner diameter) accurately before ordering • Minimum order is box of ten STANDARD FEMALE HOSE BARB FITTING 136-02366 ASCOT NO. 136-03344 MFG. NO. S657 NPT THREAD 1/4" NPTF x 1/4" NPTM ASCOT NO. 136-72404 MFG. NO. 605 NPT THREAD 1/4" x 1/4" Female Hose Barb 136-72404 STANDARD MALE HOSE BARB FITTINGS MALE PIPE THREAD • Select fitting to match hose ID • Fittings must be secured to hose with either a hose clamp or crimped-on ferrule 137-00621 ASCOT NO. 137-00418 137-00439 137-00420 137-00621 136-00608 ASCOT NO. 136-00401 136-00604 136-00406 136-00606 136-00806 136-00408 136-00608 136-00808 136-71404 136-71504 136-71604 136-71606 136-71806 136-71808 MFG. NO. 600 604 602 603 806 408 604 604-1 07001-0404 07001-0504 07001-0604 07001-0606 07001-0806 07001-0808 136-71606 NPT THREAD 1/4" 3/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 1/4" 5/16" 3/8" 3/8" 1/2" 1/2" HOSE ID 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" FEMALE PIPE THREAD 137-01621 ASCOT NO. 137-01418 137-01439 137-01520 137-01621 137-01623 137-01624 MFG. NO. 418F 439F 520F 621F 623F 624F HOSE OD 1/2" 9/16" 5/8" 21/32" 23/32" 21/32" HOSE ID 1/4" 1/4" 5/16" 3/8" 3/8" 3/8" NPT 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" MFG. NO. 615-8 615 617 621 HOSE OD 1/2" 9/16" 5/8" 21/32" HOSE ID 1/4" 1/4" 1/4" 3/8" NPT 1/4" 1/4" 1/4" 1/4" WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS
37 AIR SYSTEMS HOSE SPLICERS BRASS FERRULES ASCOT NO. 136-71405 136-71406 136-71408 136-71440 137-11520 137-11621 137-11623 MFG. NO. 07014-05 07014-06 07014-08 07014-04 520S 621S 623S HOSE OD 5/16" 3/8" 1/2" 1/4" 5/8" 21/32" 23/32" HOSE ID 5/16" 3/8" 1/2" 1/4" 5/16" 3/8" 3/8" • For use with hose barb fittings • Use with hose crimper (Ascot No. 137-08550) • QUANTITY: 50 per box MALE PIPE COUPLINGS • Solid Brass NPT ASCOT NO. 137-00344 137-00346 137-00366 137-00388 MFG. NO. 646 643-1 643-3 647-2 PIPE COUPLING FEMALE NPT • Solid Brass STANDARD HOSE CRIMPER ASCOT NO. 137-01344 MFG. NO. 643 MALE NPT 1/4" x 1/4" • Provides production capability and “big tool” crimping advantages at a much lower cost • Heavy duty ductile iron casting and hardened steel dies for long service life and positive crimping • With five dies for crimping 1/4" single braid to 3/8" double braided hose BUSHINGS AND ADAPTERS • Solid Brass MALE NPT 1/4" 3/8" 3/8" 1/2" MALE NPT 1/4" 1/4" 3/8" 1/2" ASCOT NO. 137-73215 137-73225 137-73235 137-73255 137-73265 137-73275 137-73285 137-73295 137-73305 137-73315 137-73325 137-73335 137-73345 137-73355 137-39525 137-50291 137-72421 MFG. NO. 7321-50 7322-50 7323-50 7325-50 7326-50 7327-50 7328-50 7329-50 7330-50 7331-50 7332-50 7333-50 7334-50 7335-50 3952-50 5029A-50 7242A-50 FERRULE I.D. .478" .500" .527" .562" .593" .625" .656" .687" .718" .750" .781" .812" .825" .850" .875" .900" .937" ASCOT NO. 136-61264 137-01324 137-01346 137-01348 137-01368 137-01389 MFG. NO. 06120-0604 650 651 651-1 652 652-8 MALE NPT 1/4" 1/4" 3/8" 1/2" 1/2" 3/4" FEMALE NPT 3/8" 1/8" 1/4" 1/4" 3/8" 1/2" ASCOT NO. 137-08550 MFG. NO. 1626 DESCRIPTION Standard Hose Crimper BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS
AIR SYSTEMS 38 Clamps OETIKER 2-EAR CLAMPS • Especially suited for industrial or heavy vibrating equipment • Medium pressure clamp that is used for maintenance and OEM applications ASCOT NO. MFG. NO. 316-00507 316-00709 316-00911 316-01113 316-01315 316-01517 316-01518 316-01720 316-01922 316-02023 316-02225 316-02327 316-03740 507 709 911 1113 1315 1517 1518 1720 1922 2023 2225 2327 3740 NOMINAL SIZE 1/4" 5/16" 7/16" 1/2" 9/16" 19/32" 5/8" 3/4" 13/16" 7/8" 15/16" 1" 1-1/2" INCHES CLOSED-OPEN .197-276" .276-.354" .355-.433" .433-.512" .512-.591" — .591-.708" .669-.787" .748-.866" .787-.905" .866-.984" .905-1.063" — MM CLOSED-OPEN 5-7 mm 7-9 mm 9-11 mm 11-13 mm 13-15 mm — 15-18 mm INNER INCHES .236" .276" .276" .276" .295" — .315’ WIDTH OF EAR 6.0 mm 7.0 mm 7.0 mm 7.0 mm 7.5 mm — 8.0 mm 17-20 mm .335" 8.5 mm 19-22 mm .354" 20-23 mm .354 22-25 mm .394" 23-27 mm .394" — — 9.0 mm 9.0 mm 10.0 mm 10.0 mm — PINCH CLAMPS 1 Position clamp on hose as illustrated. p 2 Pinch Clamp • Made from stainless steel • Feature a specialized tonguein-groove design to provide a tight, secure seal • Tamper evident design • Ideal for both flexible and inflexible thin-walled hoses • Smooth-edged bandsteel design prevents damage to hoses OETIKER 2-EAR CLAMP SERVICE KIT • SERVICE KIT CONTAINS THE FOLLOWING SIZES: (15) 5/16"; (15) 7/16"; (15) 1/2"; (15) 9/16"; (12) 5/8"; (12) 3/4"; (12) 7/8"; (12) 15/16"; (12) 1"; and (1) pair straight jaw pincers ASCOT NO. 316-91098 316-01098 DESCRIPTION Complete Kit Pincer Only 316-91098 Give each ear a firm squeeze with your OETIKER pincers. 3 ASCOT NO. 316-00058 316-00102 Where access to ear is difficult, use OETIKER’s side jaw pincers. MFG. NO. PEC58 CSC-102 316-00102 DESCRIPTION 5/8" Pinch Clamp Handheld Pinch Clamp Crimper WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS
1 Publizr