VALVE HARDWARE 262 Large Bore Valves (cont.) LARGE BORE TURRET VALVES 466-00690 ASCOT NO. MFG. NO. DESCRIPTION 466-00690 466-00691 466-00692 466-00693 TRJ-691 TRJ-692 TRJ-693 CHECK VALVE • Complete with cap • Permits rapid inflation and deflation • Eliminates need for core housing and inflation adapter • Used with 6190 air chuck ASCOT NO. MFG. NO. TR NO. 466-00860 6185 DESCRIPTION TR-L-860 Check Valve 466-00860 QUICK CONNECTION INFLATION CHUCK • Designed specifically for use with 6185 check valve • Sliding sleeve locks air chuck onto check valve and permits unrestricted air flow • Gauging can be done through valve on chuck • Positive air line shut off-valve must be installed in back of air chuck ASCOT NO. MFG. NO. DESCRIPTION 466-06190 6190 466-06190 TRJ-690 5.60" Large Bore Turret Valve 4.50" Large Bore Turret Valve 5.68" Large Bore Turret Valve 6" Large Bore Turret Valve SUPER LARGE BORE INFLATOR ADAP • New, safer alternative to IN-80A • Left hand threads on union body — will not come loose when screwing on t valve • New non-removable stem guide • 3/4" pipe thr for easy air hose connection • During inflation, air pressure in the tire can be checked through the stem knob with a tire pressure gauge • Will insert or extract CH-8 or CH-9 core housing • Pressure can be checked without disconnecting with a Large Bore Gauge • 1-piece stainless steel stem and collet • Reduces inflation time 60%, deflation time 80% • The core housing is held in a stainless steel e by a snap ring • Extractor is rugged enough so that the core housing can be loosened or tightened without being damaged • THE IN-100 INFLATOR ADAPTER SAVES TIME BY FAST INFLATION OR DEFLATION ON A TIRE: Aft removing the valve cap, the inflator is screwed onto the valve stem. The inflator stem is pushed in to engage the flats on the core housing. By rotating the stem counter clockwise, the core housing can be removed without any danger to the person removing it. The core housing is pulled up into the inflator body and held there during inflation or deflation. Can also be used for liquid-filling tires equipped with Super Large Bore valves. FAST INFLATION OR DEFLATION SLB-55L MB-55-3 Quick Connection Inflation Chuck SWIVEL ANGLE CONNECTORS • Component two of the super large bore system is generally a swivel connector that screws onto the spud • Connectors of various angles and lengths are available • Other end of the connector accommodates a MT-3000 flexible extension which attaches to the R-520 core housing of the 6185 check valve ASCOT NO. MFG. NO. 466-00525 466-00685 466-00625 466-00675 466-00660 466-00529 R-525 R-685 R-625 R-675 R-660 R-529-5-1/4 BEND ANGLE 90° 85° 80° 75° 60° 90° PARTS LIST: SLB-55L Ejector Union MB-55-3 Gasket for G-201 IN-100-1 Adapter Body IN-100-2 Stem and Collet G-206 Gasket for Stem Nut 466-00525 E-3100-10 Stem Sealing Nut 568-207 O-Ring for G-207 IN-100-4B Hand Knob 464 Lock Nut A-147 Dome Cap PARTS INCLUDEDIN-100A PARTS LISTPARTS INCLUDED E-3100-2A Connector Sleeve IN-100-1A Body for IN-100 IN-100-3A Nut for Connector Sleeve 10218 O-Ring G-202 Teflon Washer 466-00675 ASCOT NO. MFG. NO. 466-05311 IN-100A DESCRIPTION Super Large Bore Inflator Adapter E-3100-12 Hand Knob E-3100-1A Stem and Collet 464 Lock nut A-147 NO THREAD LOCK IN-100-2 IN-100-1 IN-100-4B 568-207 H-47 464 466-05311 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE
264 Publizr Home