WHEEL SERVICE PRODUCTS Torque Wrenches & Accessories (cont.) INDUSTRIAL TORQUE WRENCH • Norbar's New Industrial Torque Wrench • SPLIT DESIGN: Allows for easy, behind-the-seat storage in service vehicles • SMALLER CARRYING CASE: Easy to transport, and less expensive to ship back-and-forth for calibration and service • Removal of calibrated nuts means less expensive to calibrate • Adjusting scale in the handle is large and easy to read • Calibration is as easy as replacing the paper scale with a new paper scale • Ratchets are no longer a welded component, making them replaceable when worn or damaged - this means fewer wrenches scrapped • Operator handle designed to ‘guide’ the technicians hand into the proper position 82 PNEUMATIC TORQUE MULTIPLIER • OPERATING RANGE: 147 to 738 ft./lb. (200 to 1000 Nm) • ‘Soft Start’ trigger control aids socket location, and allows gradual and safe reaction location • Extended reaction is ideal for reaching recessed nuts • FAST: 1000 Nm version has a free speed of 140 rpm for rapid bolt run-down • For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator • Light weight for ease of handling • NON IMPACTING: Low vibration levels make these tools comfortable and safe to use • On Bi-Directional tools, the direction control knob is locked while the tool is running to prevent accidental damage to the gearbox • QUIET: Less than 85 dB(A) when under load • Square drive is quickly and easily replaceable 168-18141 Norbar's Industrial Torque Wrench in use. ASCOT NO. MFG. NO. 168-18141 FOR INDUSTRIAL USE SPLIT DESIGN DESCRIPTION PTME-72-2000-B 1" Square Drive Bi-Directional Pneumatic Multiplier NORBAR TRUCHECK2 168-43528 • Allows torque tool performance to be monitored and tools kept in peak condition • Limited settable options, Ideal for non-expert users with click type torque wrenches 168-42760 ASCOT NO. MFG. NO. 168-42760 168-42761 168-57600 168-57601 120110 120110.01 120115 120115.01 DESCRIPTION 4AR-N, 3/4" Drive, 150–600 ft./lb. Range 4AR-N, 1" Drive, 150–600 ft./lb. Range 5R-N, 3/4" Drive, 200–750 ft./lb. Range 5R-N, 1" Drive, 200–750 ft./lb. Range • Inbuilt Micro USB 2.0 port enables power from any USB power source • Software can be updated remotely, without the need to return the product to Norbar • Supplied with traceable calibration certificate in clockwise direction. A counter-clockwise calibration is available at additional cost ASCOT NO. MFG. NO. 168-43528 43528 DESCRIPTION Norbar TRUCHECK2 Torque Wrench Checker WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS
84 Publizr Home