251 VALVE HARDWARE Valve Caps, Cores & Extensions STANDARD VALVE CORES • Valve cores all have .206"-36" threads and are compatible with existing U.S.A. and E.T.R.O. housing standards as well as proposed I.S.O. standards -meets specification ZZ-V-25 and TR C-1 • 5405V recommended for all truck, bus and commercial applications; general purpose heat-resistant applications • 8500TV for general purpose valve use • STANDARD PACK QUANTITY: 100 OPERATING ASCOT NO. MFG. NO. 468-00103 468-08500 PRESSURE RANGE 0-200 PSI - Peaks Of 300 THE ORIGINAL ALLIGATOR V2B DUAL SEAL CAP 468-00103 468-08500 • Made in Germany by Alligator • Increased tire life • Lower fuel consumption • Safety for driver and vehicle OPERATING TEMP RANGE (F) OPENING PRESSURE 100-TP Up to 300 PSI Max -65° To +250°F 80 PSIG 8500TV NICKEL PLATED HIGH-TEMP VALVE CORES • Nickel plated for use with aluminum TPMS valves • Temperature rated up to 150 degrees • 100 Per Box ASCOT NO. 468-09002 MFG. NO. 9002 DESCRIPTION 468-09002 Nickel Plated Valve Cores PASSENGER VALVE CAPS • Fits .305"-32" threads on standard type valves PLUG SEALING MATERIAL Teflon -40° To +225°F 60 PSIG Green Teflon PLUNGER SEALING MATERIAL Silicone Black Nitrile ASCOT NO. MFG. NO. DESCRIPTION 468-02222 QTY./BOX 468-02222 V2B-50 Alligator V2B Dual Seal Cap 50 468-12222 DOUBLE SEALING VALVE CAPS 468-00660 468-00680 ASCOT NO. MFG. NO. 468-00107 468-00207 468-00660 468-00680 Cap-P CAP-PG VC8 680 468-00690 468-05005 468-59019 468-59021 690 2413CS 59-0019 59-0021 468-00690 DESCRIPTION Plastic Valve Cap Green Plastic Nitrogen Cap Standard Black Plastic Valve Cap N2 Aluminum Cap for TPMS With Adhesive Green Ring N2 Plastic Painted Metalic Silver Cap for TPMS With Adhesive N2 Combination Cap/Sleeve for TR413 Green Nitrogen Indicating Aluminum Valve Cap 468-05005 468-59019 TR NO. PACK SIZE 100 100 — — VC8 — — TR413 — Chrome Plated Nitrogen Indicating Brass Valve Cap — — 100 — 468-59021 FINISH Plastic Plastic Plastic 100 Aluminum 468-46541 Plastic 468-56541 Chrome 100 Aluminum 100 Aluminum PASSENGER VALVE CAPS TRUCK VALVE CAPS 468-00102 ASCOT NO. MFG. NO. 468-00765 765 468-00632 468-00102 632 6300V DESCRIPTION Dill Dome Cap Dill High Temp Dome Cap All Purpose Cap With Screwdriver Top For Removing/ Inserting Valve Cores BUYER'S GUIDE ASCOT SUPPLY CORPORATION TR NO. VC3 VC3 VC2 468-00632 SEALING WASHER MATERIAL Nitrile Plastic Nitrile OPERATING PRESSURE 468-00765 OPERATING TEMP RANGE (F) 0-200 PSI -40° To +165°F PACK SIZE FINISH 100 Nickel Plated 100 PSI -40° To +250°F 100 Nickel Plated 468-00635 0-200 PSI -40° To +165°F 100 Nickel Plated 468-00650 650 635 468-06300 630N 468-00635 ASCOT NO. MFG. NO. DESCRIPTION 468-06300 468-00650 QTY./ BOX Gray Plastic TPMS Cap (Tall) Black Plastic TPMS Cap for VS950 Applications Gray Plastic TPMS Cap (Short) WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION 100 100 100 • Light weight design uses both high temperature and low temperature resistant airtight seals at extension tip and valve mouth • External grooves accommodate all industry standard air chucks and gauges • Knurled surface for easy hand installation • Increases productivity • MADE & TESTED IN THE USA ASCOT NO. 468-06541 468-36541 MFG. NO. DESCRIPTION 6541B Double Seal Valve Cap, Brass 6541N Double Seal Valve Cap, Nickel, Threaded 6541P Double Seal Valve Cap, Chrome Plated QTY./ BOX 6541N Double Seal Valve Cap 50 500 50, 250 or 500 500 MADE IN THE USA V2B-250 Alligator V2B Dual Seal Cap 250 VALVE HARDWARE 468-46541 468-26451 468-56541 468-36541
253 Publizr Home