245 VALVE HARDWARE Tubeless Tire Valves (Passenger) SNAP-IN TUBELESS TIRE VALVES • Dill, Schrader or equivalent available ASCOT NO. TR NO. 461-00438 461-00412 461-00413 461-00414 461-00418 461-00423 EFFECTIVE LENGTH FOR .346" VALVE HOLES 438 1.2" FOR .453" VALVE HOLES 7/8" 412 413 414 418 423 461-00415 461-00425 415 425 1-1/4" 1-1/2" 2" 2-1/2" FOR .625" VALVE HOLES 1.25" 2" TR414 TR418 TR423 TR438 HIGH PERFORMANCE VALVE • Chrome plated clamp-in valves are easily installed in all types of passenger car wheels • For .453" valve holes CHROME-SLEEVE SNAP-IN TYPE TUBELESS TIRE VALVES • Standard snap-in type tubeless tire valves are fitted with an attractively designed hexagon valve cap and chrome sleeve to cover the valve stem area • Available in two lengths to fit .453" valve holes ASCOT NO. TR NO. 461-41211 461-41311 412SC 413SC EFFECTIVE LENGTH 7/8" 1-1/4" 461-41311 HIGH PRESSURE SNAP-IN VALVES • Tubeless snap-in type valves for high pressure applications • Maximum cold inflation pressure is 80 PSI • For .453" or .625" rim holes • Do not use on tire rims that exceed .205" in thickness at the valve hole ASCOT NO. TR NO. 461-00600 461-00602 461-00801 EFFECTIVE LENGTH 600HP 1.27" 602HP 801HP 2" 1.25" VALVE HOLE DIAMETER .453" .453" .625" 461-00602 ! CAUTION BUYER'S GUIDE 461-00600 ASCOT NO. MFG NO. DILL NO. 462-06010 462-06020 462-06030 462-06040 DESCRIPTION TV-6010 VS-934E 3/4" Length, Standard TV-6020 VS-933E Bent at 45° Angle TV-6030 VS-936E 1-1/4" Length, Standard TV-6040 VS-935E 1-3/4" Length, Standard HIGH PRESSURE CHROME SLEEVE TIRE VALVE • Used to 80 PSI cold inflation pressure • Fits 453" diameter valve hole, maximum rim thickness .205" at valve hole • Chrome sleeve ASCOT NO. TR NO. 461-01600 DESCRIPTION 600HPC High Pressure Chrome Sleeve Tire Valve IMPORTANT: Snap-in passenger valve stems are safe for tire pressures up to a maximum of 65 PSI (cold tire pressure) and for a maximum rim thickness of .156” (3.9mm). If greater pressure or rim thickness is required, metal clamp-in valve stems are recommended. 461-01600 ASCOT NO. MFG NO. 462-00800 462-00801 ENKEI VALVES • A high performance “No Show” type chrome plated valve that installs from the outside • A rubber washer and nut are on the inside • Fits .453" diameter hole 462-06020 DESCRIPTION VS-944-R High Performance Valve USA VS-944-DW High Performance Valve 462-00800 ASCOT NO. TR NO. EFFECTIVE LENGTH 468-59765 468-99393 RG-54 RG-39 Grommet for .453" Hole Grommet for .625" Hole 468-99393 Dill Signature Cap TR412 TR415 TR413 CLAMP-IN TUBELESS TIRE VALVES • Nickel plated metal valves can be installed in all passenger cars, light trucks and industrial rims with .453" or .625" valve holes • Rubber grommet forms a seal when valve is clamped to rim by tightening hex nut • Maximum inflation pressure is 200 PSI • Includes 2 rubber grommets ASCOT NO. TR NO. EFFECTIVE LENGTH 462-00416 461-01416 416 416L 1.4" 2.2" REPLACEMENT GROMMETS • Replacement grommets for .453" and .625" valve holes 462-00416 462-06040 ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE
247 Publizr Home