TIRE REPAIR 423 ® Tire Repair Tools & Accessories (cont.) 1/4” & 1/8” SHAFT ROTOR SAWS • Excellent for high-tread skiving FOR HIGHTREAD SKIVING 538-61900 ASCOT NO. 538-61900 538-00340 MFG. NO. RH619 RS-34-E DESCRIPTION 1-3/8" Rotor Saw, 1/4" Shaft, Coarse (SSG 330) 3/4" Rotor Saw, 1/8" Shaft, Fine (SSG 170) Sidewall Disc. NAIL HOLE REAMERS • For bias tires FOR BIAS TIRES 538-62600 ROTARY KNIFE BLADES ASCOT NO. 538-62600 MFG. NO. RH626 DESCRIPTION 1/4" x 3" NHR, 1/4" Shaft, Coarse (SSG 330) • Cuts and textures ends of pre-cured tread • Fits popular tread builders • Long-Lasting! FOR PRE-CURED TREAD RETREADING SIDEWALL WHEELS • Designed for shoulder and sidewall preparation • Used on manual or automatic sidewall buffers • Fast and effective removal of oxidized rubber • Used with or without traditional wire brushes • Excellent durability, reducing your cost per buff • Provides a uniform texture maximizing rubber-to-rubber bond 538-10134 FOR SHOULDER & SIDEWALL 538-10013 ASCOT NO. 538-41239 538-41223 538-42239 538-42223 MFG. NO. DW412O390 DW412O230 SD412O390 SD412O230 DESCRIPTION 4-1/2" Dish Wheel, 7/8" Bore, Coarse (SSG 390) 4-1/2" Dish Wheel, 7/8" Bore, Medium (SSG 230) 4-1/2" Disc, 7/8" Bore, Coarse (SSG 390) 4-1/2" Disc, 7/8" Bore, Medium (SSG 230) Dish Wheel DISC/DISH SIDEWALL WHEELS • For angle head machines; section repair & cosmetics DISC VS. DISH SHAPE The Disc shape is just slightly curved while the Dish is much more rounded. The selection of shape is based on operator preference, and the job being done. Both wheels are excellent for exterior repair work, while the Dish Wheel can also be used inside of very large tires. FAST AND EFFECTIVE 538-10135 538-10020 538-70800 ASCOT NO. MFG. NO. 538-12900 RH129 538-70750 538-70800 538-70850 RH707-50 RH708 RH708-50 DESCRIPTION 4" Buffing Cup, 3/4" Arbor Hole, Coarse (SSG 390) *Bandag pre-8400 series 6" x 50mm Donut Wheel, Very Coarse (SSG 460) 6" x 1" x 1-1/2" Donut Wheel, Coarse (SSG 390) 6" x 50mm Donut Wheel, Coarse (SSG 390) ASCOT NO. 538-10134 538-10135 538-10013 538-10014 538-10020 538-10021 MFG. NO. RH100-GEG-134 RH100-GEG-134-80 RH100-GEG-138 RH100-GEG-138-80 RH100-GEG-200 RH100-GEG-200-80 DESCRIPTION 6" x 1-3/4", 150 Grit *Salisbury + Oliver 6" x 1-3/4", 80 Grit *Salisbury + Oliver 6" x 1-3/8", 150 Grit *Cahill 6" x 1-3/8", 80 Grit *Cahill 6" x 2", 150 Grit *Bandag 5110, All Matuzzi 6" x 2", 80 Grit *Bandag 5110, All Matuzzi WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS
426 Publizr Home