342 ALIGNMENT Camber/Caster Tools FORD 4WD CAMBER/CASTER SLEEVE SET • Change camber, caster or both at the same time. Remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve • To adjust camber/caster, the sleeve may be lifted and rotated 1/8 turn • Sized in 1/4˚ increments through 2˚ • One sleeve covers one side of the vehicle • ESTIMATED INSTALLATION TIME: .5 hr/side ASCOT NO. 231-23100 MFG. NO. 23100 DESCRIPTION Complete Set APPLICATIONS FORD 4WD: 1980 & Up F250, F350, E250, E350, Full Size Bronco w/Ball Joints, 1980-96 F150, F250 (L/D) FORD & DODGE CAMBER/CASTER SLEEVE SET • Sleeves change camber, caster or both at the same time • Remove the upper ball joint stud nut and break taper free between the stud and sleeve • Calculate the change and install correct sleeve • Sized in 1/4˚ increments • One sleeve covers one side of the vehicle • ESTIMATED INSTALLATION TIME: .5 hr/side ASCOT NO. 231-23130 MFG. NO. 23130 DESCRIPTION Complete Set APPLICATIONS DODGE: 1994-99 BR2500 4WD, BR3500 2WD/4WD Ford 4WD: 1992 & Up F350 Crew Cab Pickup, Some F250 4WD w/ Straight Axle, 1999 & Up Super Duty 250, 350, 450, 550 231-23130 231-23100 23220 & 23230 SLEEVE SETS • Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on the new 4x4 F250 and F350 Super Duty trucks ASCOT NO. 231-23220 231-23230 MFG. NO. 23220 23230 DESCRIPTION Complete Set Complete Set APPLICATIONS FORD 4WD: 2005 & Up F250, F350 Super Duty; FORD RWD: 2005 & Up F250, F350 Solid Axle/Coil Spring FORD RWD/4WD: 2005 & Up F450, F550 Coil Springs; CHEVY/ GMC 4WD: 2005 & Up Kodiak K4500, Topkick K5500 231-23220 FORD 2 & 4WD CAMBER/CASTER TRUCK SLEEVES • Sleeves are widely used to adjust caster and/or camber on many Ford 2WD/4WD trucks • To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present • Sleeves allow for larger caster and camber changes which may be required on lowered and raised trucks • SET INCLUDES: Nine of the XRTM Camber/Caster truck sleeves ASCOT NO. MFG. NO. 231-23180 23180 DESCRIPTION Complete Set APPLICATIONS FORD 2WD:1987 & Up F350, 1987-96 F150, F250 (L/D), 198990 Bronco II, 1992 & Up E150, E250, E350, 1991-94 Explorer, 1989 -97 Ranger, 1999 & Up F250, F350 Super Duty; MAZDA 2WD:1991-97 Navajo, Pickup; Ford 4WD:1991-94 Explorer, 1990 - 97 Ranger; MAZDA 4WD:1991-97 Navajo, Pickup BALL JOINT PRESS SLEEVES • These specially designed sleeves make installation of the #23510-40 ball joints easy and profitable for the installer • Sleeves are designed to match the angle of the yoke on the axle housing to insure proper ball joint ASCOT NO. 231-23580 MFG. NO. 23580 DESCRIPTION Bushing Sleeves For Ball Joints 23510, 23520, 23530, 23540 231-23580 231-23230 231-23180 BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION ALIGNMENT
345 Publizr Home