114 LIFTING EQUIPMENT Portable Bottle Jacks (cont.) ® PROFESSIONAL LIFTING EQUIPMENT 35 AND 60-TON CAPACITY BOTTLE JACKS • For heavy duty truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting, pushing, spreading, bending, pressing, or straightening are required • Two piece zinc plated handle • Prevent rust with “Parkerized” pump piston, ram and extension screw • No leak “Uniweld” construction • 50% safety overload factor • State of the art design reduces repair time • Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances • Lightweight forged base provides more steel only where strength is required • The heavy-duty release valve was designed to eliminate parts and reduce the chances of breakage and excessive wear • Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard • Made in Japan 12 AND 22-TON CAPACITY LOW FORGED STEEL BASE BOTTLE JACKS • Welded steel construction throughout - reduces metal fatigue allowing for longer use life • Unique base forging method increases resistance to high pressure and gives a degree of durability • Special type of steel resists rust • Needle valve allows for controlled lowering of the ram • Casing, cylinder and base are joined by electric welding for greater strength and are leak proof • Heat treated extension screw provides low pickup height adjustment, maximum lift height and extra strength HEAVY DUTY WELDED STEEL HEAVY DUTY 301-02200 TWO-PIECE ZINC PLATED HANDLE 301-02201 301-01220 301-76535 ASCOT NO. 301-01220 301-02200 301-76560 ASCOT NO. 301-76535 301-76560 MFG. NO. 76535 76560 CAPACITY 35-Ton 60-Ton MIN. HEIGHT MAX. HEIGHT 17-5/16" 11" 12" 18-11/16" LIFTING HANDLE Yes Yes 301-01201 301-02201 ZNB-12 12-Ton ZNB-22 22-Ton 6-3/4" 7-1/8" MFG. NO. ZN-12 ZN-22 MIN. CAP. 12-Ton HEIGHT 9-1/2" MAX. HEIGHT STANDARD 18-1/2" RAM LIFT 5-7/8" 22-Ton 10-5/8" 20-1/8" 6-1/4" LOW 13-3/8" 3-3/4" 12" 3-3/8" 3" 1-1/2" 4-1/8" x 6-1/2" 5 x 7-1/8" 15 lb. 27 lb. SCREW EXT. 3-1/8" 3-1/4" BASE SIZE 4-1/8" x 6-1/2" 5" x 7-1/8" SHIP WT. 18 lb. 30 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT
117 Publizr Home