0

1 FEATURED PRODUCTS AIR OPERATED TIRE SPREADER • For passenger/RV/light truck tires • Wide platform gives stable work surface • Adjustable light AUTOMATIC TRUCK TIRE SPREADER • Air lift allows operator to lift without lifting the tire/wheel • Heavy gauge steel construction • Work light included • Air regulator/lubricator included FLOOR MOUNT ADJUSTABLE TIRE SPREADER • Provides easy access for repairing passenger and light truck tires • The adjustable tire spreader can accommodate all tires from garden service through light truck • The Tire Spreader has a foot-control swivel, tilts, and is equipped with a tool tray and a floor stand base-plate 604-01275 603-00275 603-00825 ASCOT NO. MFG. NO. DESCRIPTION 603-00275 BJ-S275 Air Operated Tire Spreader ASCOT NO. MFG. NO. DESCRIPTION 603-00825 BJ-S825 Automatic Truck Tire Spreader ASCOT NO. MFG. NO. DESCRIPTION 604-01275 BJ-275B Floor Mount Adjustable Tire Spreader WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE FEATURED PRODUCTS

3 FEATURED PRODUCTS tion • Double pump y lift arm tion 3, 6 & 12-TON JACK STANDS • Heavy-duty jack stands that are suitable for emergency tire changes, repairs and more • Ratchet height adjustmen added stability • Multi-le adds strength and dur NOW FEATURING A DOUBLE L PIN FOR ADDED SE 10-TON HIGH JACK STANDS (PAIR) • Pin-style stands with supporting range from 27.95" to 47.56" suitable for high-height applications • Hea duty tubular steel design provides stability and rigidity • Multiple pin holes to allow easy adjustment to desired height • Saddle with lugs for easy positioning of the load • Sold and to be used only in pairs ASCOT NO. MFG. NO. DESCRIPTION 302-51005 510005 10-Ton High Jack Stands (Pair) ASCOT NO. MFG. NO. DESCRIPTION 302-63030 302-63060 302-63120 63030 63060 63120 3-Ton Jack Stands (Pair) 6-Ton Jack Stands (Pair) 12-Ton Jack Stands (Pair) WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE FEATURED PRODUCTS

4 FEATURED PRODUCTS 156RPG 1" DRIVE & #5 SPLINE SUPER DUTY AIR IMPACT WRENCH • 6" extended anvil • Steel end plates • WORKING TORQUE RANGE: 1,600-1,800 ft./lb. • FREE SPEED: 4,500 RPM • MAXIMUM TORQUE: 1,800 ft./lb. 155-26464 RPG 1" DRIVE MINI PLUS AIR IMPACT WRENCH • 6" extended anvil • 3-position power setting • Rubber-coated side handle for added comfort • Powered by the twin hammer clutch • FREE SPEED: 5,000 RPM • MAXIMUM TORQUE: 2,000 ft./lb. RPG 1" & #5 SPLINE DRIVE SUPER DUTY IMPACT WRENCH • 6" extended anvil • 3-position forward and reverse • High efficiency 6-vane motor • Swoop-back side handle for maneuverability and balance • Pinless clutch mechanism • WORKING TORQUE RANGE: 1,800-2,000 ft./lb. • FREE SPEED: 5,000 RPM • MAXIMUM TORQUE: 2,000 ft./lb. ASCOT NO. 155-12856 155-17786 155-26464 156-12856 156-17786 MFG. NO. A2856 A778-6 A26464 A2856SP A778SP-6 SQUARE DRIVE 1" 1" 1" #5 Spline #5 Spline FREE SPEED (RPM) 5,000 4,500 5,000 5,000 4,500 MAX TORQUE (FT./LB.) 2,000 1,800 1,800 2,000 1,800 AIR PRESSURE (PSI) — 90 90 — 90 AIR CON. AVG (CFM) 12 8.4 9 12 8.4 AIR INLET (NPT) 1/2" 1/2" 1/2" 1/2" 1/2" HOSE SIZE 3/4" 3/4" 3/4" 3/4" 3/4" LENGTH 20.5" 20.3" 19.2" 20.5" 20.3" WEIGHT (LB.) 27.6 26.59 17.86 27.6 26.59 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION FEATURED PRODUCTS

5 FEATURED PRODUCTS RPG 1/2” DRIVE SUPER DUTY AIR IMPACT WRENCH • 2" extended anvil • FREE SPEED: 8000 RPM • MAXIMUM TORQUE: 600 ft./lb. • Proven design and the most popular configuration in the tire service industry • Powered by the durable and high performing twin hammer mechanism • Handle exhaust RPG 1/2" DRIVE COMPOSITE IMPACT WRENCH W/ EXTENDED ANVIL • Convenient one-hand operated forward/reverse push button • Four-setting torque adjustment switch • Compact with a total length of only 7.2" • Twin hammer mechanism provides smooth balance • Feather trigger for precise speed control • Energy efficient motor for maximum performance & long life • Swivel air inlet prevents hose from twisting 153-23120 153-12260 153-23121 ONE-HAND PUSH BUTTON ASCOT NO. 153-12260 153-23120 153-23121 MFG. NO. A2131-2COMP A2312 SS-A2312 SQUARE DRIVE 1/2" 1/2" 1/2" FREE SPEED (RPM) 7,500 8,000 8,000 MAX TORQUE (FT./LB.) 685 600 600 AIR PRESSURE (PSI) 90 90 90 AIR CON. AVG (CFM) 5 4 4 AIR INLET (NPT) 1/4" 1/4" 1/4" HOSE SIZE 3/8" 3/8" 3/8" LENGTH 7.2" 8-1/8" 6.1" WEIGHT (LB.) 4.5 5.6 5.9 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE FEATURED PRODUCTS

6 FEATURED PRODUCTS HEAVY DUTY TIRE REPAIR CABINET Features sliding storage drawers with rollers. • SIZE: 19.6" x 10" x 26" • 2 shelves inside (3 storage levels) • 2 tool hook sets on two inside doors • 2 sliding storage drawers with rollers • Switch-to-open handle • Optional shelf available • WEIGHT: 36 lbs. ASCOT NO. 719-12001 719-12011 MFG. NO. TBG-WC12001 DESCRIPTION Heavy Duty Tire Repair Cabinet TBG-WC12001-01 Optional Shelf for Tire Repair Cabinet 719-12001 18-DRAWER METAL STORAGE CABINET • CABINET SIZE: 33-3/4" (W) x 11-3/4" (D) x 10-3/4" (H) • DRAWER SIZE: 4-7/8" (W) x 11-1/4" (D) x 2-3/4" (H) • Modular drawer design for efficiency and organization • Heavy-duty, welded steel construction provides strength and stability • Drawers feature stoppers to prevent accidental pulling or spilling • Full-width handles and easy glide runners • Shipped fully assembled and ready to use • WEIGHT: 45 lbs. ASCOT NO. MFG. NO. 719-00018 18D DESCRIPTION 18-Drawer Metal Storage Cabinet 719-00018 32-BIN METAL STORAGE CABINET • CABINET SIZE: 33-3/4" (W) x 8-1/2" (D) x 19-1/4" (H) • DRAWER SIZE: 4" (W) x 8-3/8" (D) x 4-1/2" (H) • Keeps your tools and accessories organized and accessible • Heavy-duty, welded steel construction provides strength and stability • Hemmed bin fronts for retaining parts • Mounting holes located in the top and bottom • Shipped fully assembled and ready to use • WEIGHT: 37 lbs. ASCOT NO. MFG. NO. 719-00032 32B DESCRIPTION 32-Bin Metal Storage Cabinet 719-00032 *Actual product appearance may vary BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION FEATURED PRODUCTS

7 FEATURED PRODUCTS 402-32610 PROFESSIONAL STUD/HUB BRUSH KIT • Ideal for hub and stud cleaning job with ease • QUICK AND EASY: Change brushes in seconds • Includes a ½" drive adapter • Powered by a cordless drill • Replacement brushes available PARTS INCLUDED (2) 14mm Stud Brushes (2) 22mm Stud Brushes (2) Passenger Hub Brushes (2) Truck Hub Brushes ASCOT NO. MFG. NO. 402-32610 402-32611 402-32613 402-32614 402-32615 402-32616 PROFESSIONAL STUD/HUB KIT CONTENTS (1) Plastic Tool (1) Adapter Blow Molded Case PARTS INCLUDED 402-32615 DESCRIPTION 203610-ASC Stud/Hub Brush Kit 203611-ASC Plastic Hub/Stud Tool & Adapter 203613-ASC 4-Pack of Replacement 14mm Stud Brushes 203614-ASC 4-Pack of Replacement 22mm Stud Brushes 203615-ASC 4-Pack of Replacement Passenger Hub Brushes 203616-ASC 4-Pack of Replacement Truck Hub Brushes 402-32613 WHEEL HUB GRINDER • Special grinder for cleaning the wheel centering device as well as the attachment area between the wheel and hub • Burnt-in corrosion residues are completely removed in a quick and easy process • Actual cleaning time per hub only takes between 3-25 seconds depending upon residue thickness • Replacement discs sold separately (3 per package) INNER RIM CLEANER AND REPLACEMENT DISCS • Meant for the optimal cleaning of the inner wheel contact surface • Prevents corrosion related distortion of wheel bolt tightening torque • Allows for the complete removal of burnt-in corrosion • Used only on the inside of an aluminum rim • Velcro adhesive makes it easy to change out replacement discs • 75 mm diameter • Replacement discs sold separately (3 per box) 402-4 402 RPG HUB BUDDY TOOL • IMPACT RATED: No need to change tools • Complies with best practice R.I.S.T. procedure • Removes rust, corrosion and other build-up from wheel stud, drums and tire rim • Helps proper torque of lug nuts by removing corrosion • A must for easy and accurate tire balancing • INCLUDES: 1 Hub Buddy XL attachment and 1 cleaning disc head • Replacement cleaning discs available in packs of six 402-37330 402-37335 402-43351 ASCOT NO. MFG. NO. DESCRIPTION 402-43352 402-43351 433 502/M Wheel Hub Grinder 433 501 Grinder Replacement Discs (3 per package) ASCOT NO. MFG. NO. DESCRIPTION 402-43357 ASCOT NO. MFG. NO. DESCRIPTION 402-37330 402-37335 433 507 Inner Rim Cleaner 402-43358 433 508 Replacement Discs (3 per Box) 402-37340 37330 RPG Hub Buddy Tool 37335 RPG Hub Buddy Tool Replacement Pads 37340 1-1/2" RPG Hub Buddy Tool Replacement Pads WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE FEATURED PRODUCTS

8 FEATURED PRODUCTS TIRE SERVICE LED WORK LIGHT & REPLACEMENT LAMP HEAD • LED: 1-piece 3W high power LED • THREE CONVENIENT SWITCH MODES SO THAT YOU CAN OPERATE AT THE POWER YOU NEED: High - Low - Off • WORKING TIME: Approx. 3 hours • CHARGING TIME: Approx. 3 hours • BRIGHTNESS: Approx. 200LM for High Mode; 80LM for Low Mode • Magnet on lamp body and head • Charging indicator on lamp head • Detachable lamp head with quickclip mounting to body • Smart-clamp design for 9mm-32mm distance • MULTI-USE: Clamping, magnetic, hand-held • BATTERY: Customized 3.7V 900mAh rechargeable polymer battery • INCLUDED: 5V 0.6A (UL) adapter + USB cable ASCOT NO. MFG. NO. 312-04146 312-04147 DESCRIPTION TWL3035 Tire Service LED Light w/ USB Adapt TWL3035H Replacement Lamp Head for Tire Service LED Light RECHARGEABLE WATERPROOF WORK LIGHT 312-05224 • Best in the industry, Ascot Supply Corporation’s Rechargeable Waterproof Work Light is the brightest rechargeable work light available with its powerful 66 LED’s (460 lumens) • Swivel hook for hanging • Universal attachment hook can be used as a light stand or attached under a car hood • Rechargeable battery • Replacemen 12 V lighter adapter is also available and sold separately ASCOT NO. MFG. NO. 312-05224 312-15224 312-25224 DESCRIPTION CED5224A-AS Rechargeable Waterproof Work Ligh CED522P3-AS Replacement AC Adapter CED5224P1-AS 12V Lighter Adapter HEAD LIGHT WITH RECHARGEABLE BATTERY • Hands-free, versatile and comfortable with adjustable straps • MATERIAL: Aluminum +ABS+PC • LED: 1-piece high power CREE T6 bulb • BRIGHTNESS: Approx. 500LM for high mode • 4-MODE LED LAMPS: High - Low - Strobe - off • WORKING TIME: Approx. 6 hours on High; Approx. 12 hours on Low • CHARGING TIME: Approx. 5 hours • RECHARGEABLE BATTERIES: 2x 3.7V 1800mAh Li-ion batteries (3600mAh total battery capacity) • Sensor Function • USB cable included ASCOT NO. MFG. NO. DESCRIPTION 312-03120 312-08473 THL2019 CREE Head Light with Rechargeable Battery 312-03120 ASCOT NO. MFG. NO. DESCRIPTION 312-14923 14-923 XLight Tire Servic LED WORK LAMP ASSEMBLY • LED worklamp for tire spreaders • Directional spotlight for increased visability • 8W COB LED will provide 650 Lumens, 750 Lux at 1M • Stays cool to the touch • Heavy duty LED lens • Swivel head • Stays cool to the touch • Adjustable, flexible gooseneck • Includes mounting bracket ASCOT NO. MFG. NO. DESCRIPTION 312-08473 TR8473 LED Work Lamp Assembly 312-14923 312-04146 COB RECHARGEABLE WORK LIGHT W/ USB CABLE • 400LM brightness • Dimming Switch • Features a hook on lamp head and base with magnet for handsfree operation • WORKING TIME: Approx. 2.5 hrs. • CHARGING TIME: Approx. 4 hrs. • 8W COB LED ASCOT NO. MFG. NO. 312-03007 TWL3007E DESCRIPTION COB Rechargeable Work Light w/ USB Cable XLIGHT TIRE SERVICE LED WORK LIGHT • Designed for hands-free lighting during tire service and other work applications • 14" adjustable springtube for optimum light positioning within tight spaces • 2-stage compact high-power LED light provides 125 & 250 lumen output • Multiple high-power magnets on the handle and light-head attract easily to most metal surfaces • Lithium-ion rechargeable battery • Compatible with all passenger, light truck and commercial truck tires • Compatible with all tire spreaders 312-03007 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION FEATURED PRODUCTS

10 TABLE OF CONTENTS AIR SYSTEMS ............................ 13 Air Compressors .............................14 Inflation Systems ............................23 Filters, Regulators and Lubricators ............ 25 Hose Reels & Accessories .................... 28 Air Line Couplers & Plugs .....................33 Hose Adapters ..............................37 Clamps .................................... 39 AIR TOOLS .............................. 41 Impact Wrenches (CP) ...................... 42 Sanders & Blue Tork (CP) .................... 46 Air Ratchets (CP) ........................... 47 Buffers & Grinders (CP) ...................... 48 Air Drills (CP) .............................. 50 Air Tools & Accessories (RPG) .................52 Impact Wrenches (IR) ....................... 58 Cordless Tools (IR) ........................... 61 Cordless Tools (Milwaukee) .................. 62 Hammers, Grinders & Drills (IR) .............. 66 Air Tool Lubricants & Conditioners ............ 70 Accessories & Work Stations .................. 71 WHEEL SERVICE PRODUCTS ........... 73 Impact Socket Sets ..........................74 Individual Impact Sockets. . . . . . . . . . . . . . . . . . . . 76 Torque Wrenches & Accessories ...............78 Loose Nut Prevention ........................87 Wheel Centering Products ................... 90 Lug Nut Removal Products ................... 92 Wheel Attaching Hardware .................. 98 Tire & Wheel Service Tools ...................104 Stud & Hub Cleaning Tools ...................108 LIFTING EQUIPMENT ....................111 Bottle Jacks ................................ 113 Service Jacks ...............................120 Jack Stands ................................ 135 Specialty Jacks .............................140 Transmission Jacks ..........................143 Wheel Dollies ..............................147 Vehicle Stands & Accessories ................. 152 Shop Cranes ............................... 155 BUYER'S GUIDE TIRE & WHEEL SERVICE ............... 157 Tire Lubricants & Sealants ...................160 Markers ................................... 167 Tire Branding Inserts ........................168 Bead Breakers ..............................170 Hydraulic Pumps & Rams .................... 176 Otr Service Tools ...........................180 Cribbing Sets & Wheel Chocks ................182 Bead Seating Devices .......................184 Chloride Pumps ............................190 Mount/Demount Tools ......................192 Hammers & Wedges ........................199 Wrenches & Lug Wrenches. . . . . . . . . . . . . . . . . . 202 Shop Service Tools ......................... 205 Tire Inflation Systems ...................... 208 Safety Inflation Cages .......................210 VALVE HARDWARE .................... 215 TPMS Tools & Sensors .......................218 TPMS Accessories & Kits .................... 227 TPMS Tools ............................... 236 TPMS Transmitters ......................... 240 Aftermarket Accessory Kits ................. 242 Tire Valves ................................ 245 Truck & Specialty Valves .................... 247 Valve Caps, Cores & Extensions .............. 250 Special Application Products ................ 253 Large Bore Extensions ...................... 263 Valve Hardware Tools ...................... 266 Tire Gauges ............................... 268 Inflator Gauges ............................ 279 SERVICE EQUIPMENT ................. 287 Tire Changers ............................. 288 Tire Changer Accessories ................... 294 Heavy Duty Tire Changers .................. 297 Wheel Balancers ........................... 300 Wheel Balancer Accessories ................. 305 Challenger Lifts .............................310 Rubber Blocks & Lift Pads. . . . . . . . . . . . . . . . . . . . 317 Rolling Jacks & Work Stations ................318 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TABLE OF CONTENTS

TABLE OF CONTENTS 11 WHEEL B ...................319 Lead Passenger Wheel Weights ............. 320 Zinc Passenger Wheel Weights ............... 321 Steel Passenger Wheel Weights ............. 322 Plasteel® Passenger Wheel Weights .......... 323 Heavy Duty Lead Truck Wheel Weights ....... 324 Zinc Truck Wheel Weights .................. 325 Lead Adhesive Wheel Weights .............. 326 Steel Adhesive Wheel Weights .............. 327 Steel Adhesive Rolls & Accessories ........... 329 Wheel Weight Displays & Kits ............... 330 Wheel Weight Tools ......................... 331 Balancing Beads ........................... 333 ALIGNMENT ........................... 339 Alignment Tool Assortments ................ 340 Camber/Caster Tools ....................... 342 Heavy Duty Alignment ..................... 348 Automotive Alignment Equipment ............ 351 A .......35 Battery Chargers & Testers .................. 355 Lubrications & Sealants ..................... 356 Exhaust Hoses & Tailpipe Adapters ........... 358 Bench Grinders & Shop Vises ................ 359 Pliers & Screwdrivers ........................361 Shop Cleaners & Brushes ................... 362 Shop Lights ............................... 364 Service Stickers ............................ 365 Tire Displays & Carts ....................... 366 Interior Protection Products ................. 368 Studding Equipment ........................ 371 Drains & Pumps ............................372 Fluid Exchange ............................ 376 Oil Accessories ............................ 378 Safety Products ........................... 380 Wheel Chocks ............................. 382 Gloves .................................... 383 TIRE REPAIR MATERIALS ............. 385 Cements, Sealants & Patches ............... 386 Air Buffers & Drills ......................... 405 Tire Repair Tools & Accessories .............. 407 Tire Spreaders & Repair Stations ............. 424 Cabinets & Storage ....................... 428 RETREADING .......................... 429 Rasp Blades & Spacers ..................... 430 Retread Accessories ........................ 433 Retread Consumables ...................... 437 Tire Appearance ........................... 438 Envelopes ................................ 440 MEASUREMENT CONVERSIONS .......441 ALPHABETICAL INDEX. . . . . . . . . . . . . . . . 442 NUMERICAL INDEX ................... 446 Ascot Supply Corporation is not responsible for inadvertent typographical errors or omissions. WARNING: For more information go to www.P65Warnings.ca.gov. BUYER'S GUIDE SUPPLY CORPORATION TABLE OF CONTENTS

WARNING: For more information go to www.P65Warnings.ca.gov.

AIR SYSTEMS 13 Air Compressors Inflation Systems Filters, Regulators & Lubricators Hose Reels & Accessories Air Line Couplers & Plugs Hose Adapters Clamps WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE

14 AIR SYSTEMS Advantage Series The Advantage Series is a fully packaged unit with all of the additional accessories customers need included. Advantage series compressors are typically shipped from the factory in 24 hours or less. Compressors are shipped ready to install and operate. Each new assembled unit comes with a standard three-year standard warranty, with option for a six-year extended warranty with the purchase of an extended warranty kit. RECIPROCATING AIR COMPRESSOR • 5-25 HP • MAXIMUM PRESSURE: Up to 175 PSIG • 17.0 to 203.6 ACFM at 175 PSIG • Two Stage, Splash Lubricated • Tank-Mounted, Simplex and Duplex Models • Vertical or Horizontal Configurations • Package comes standard with up to six pre-installed options • Factory filled with ChampLub lubricant • Control panel with control voltage transformer SIZING A COMPRESSOR HEAVY DUTY APPLICATION GUIDE ASCOT NO. MFG. NO. HP OR HPD 101-00058 101-00078 101-00158 101-01012 101-11012 101-40780 101-40781 101-40782 101-40783 101-41012 101-41112 101-42112 101-44112 101-41512 101-42512 101-43512 101-44512 VR5-8 VR5-8 VR5-8 VR5-8 VR5-8 VR7F-8 VR7F-8 VR7F-8 VR7F-8 VR10-12 VR10-12 HR10-12 HR10-12 HR15-12 HR15-12 HR25-12 HR25-12 5 5 5 5 5 7.5 7.5 7.5 7.5 10 10 10 10 15 15 25 25 * V: Vertical, H: Horizontal Configuration PART NO. ADVA-S01 ADVA-S05 ADVA-S126 ADVA-S03 ADVA-S148 ADVA-S168 ADVA-S13 ADVA-S17 ADVA-S15 ADVA-S21 ADVA-S19 ADVA-S25 ADVA-S23 ADVA-S33 ADVA-S31 ADVA-S37 ADVA-S35 PUMP MFG. NO. R-15B R-15B R-15B R-15B R-15B R-15B R-15B R-15B R-15B R-30D R-30D R-30D R-30D R-40A R-40A R-70A R-70A TANK VOLTS 230/1 208/3 230/1 230/3 230/3 208/1 230/1 208/3 230/3 208/3 230/3 208/3 230/3 208/3 230/3 208/3 230/3 CAPACITY (GAL.)* 80V 80V 80V 80V 80V 80V 80V 80V 80V 120V 120V 120H 120H 120H 120H 120H 120H 175 PSI RATING CFM DEL’Y 17.0 17.0 17.0 17.0 17.0 22.3 22.3 22.3 22.3 33.8 33.8 33.8 33.8 54.1 54.1 90.7 90.7 RPM 737 737 737 737 737 949 949 949 949 718 718 718 718 776 776 776 776 DIMENSIONS (LXWXH) 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 35 x 27 x 75 43 x 30 x 81 43 x 30 x 81 71 x 32 x 55 71 x 32 x 55 73 x 36 x 62 73 x 36 x 62 74 x 36 x 65 74 x 36 x 65 APPROX. SHIP WEIGHT (LBS.) 590 590 590 590 590 630 630 630 630 895 895 895 895 1210 1210 1557 1557 101-41112 SIMPLEX & DUPLEX MODELS SHIPPED QUICKLY BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS

AIR SYSTEMS 15 DUPLEX AIR COMPRESSORS FULLY PACKAGED COMPRESSORS: Compressors equipped with all of the desired options such as Mounted Control Panel, Low Oil Level Monitor, Automatic Tank Drain, Air-Cooled Aftercooler and Vibration Isolators. DUPLEX FULLY PACKAGED COMPRESSORS: Two (2) Compressors and accessories supplied in one package provides the flexibility of single operations, alternating between compressors, or duplex operations to meet high air demands • INCLUDES: Automatic Tank Drain, Vibration Isolators, Two (2) Mounted Control Panels plus alternator, Low Oil Level Monitors and Air Cooled Aftercoolers. CHAMPION PREMIUM EXTENDED WARRANTY KITS AVAILABLE ASCOT NO. 101-51120 101-53120 101-54120 101-75120 101-75320 101-75420 101-10325 MFG. NO. HR5D-12 HR5D-12 HR5D-12 HR7D-12 HR7D-12 HR7D-12 HR10D-25 HP 5 5 5 7.5 7.5 7.5 10 VOLTAGE/PHASE 230/1 208/3 230/3 230/1 208/3 230/3 230/3 TANK SIZE 120 120 120 120 120 120 250 TANK CONFIG. PUMP MFG. NO. Horiz. Horiz. Horiz. Horiz. Horiz. Horiz. Horiz R-15B R-15B R-15B R-30D R-30D R-30D R-30D ACFM @175 PSIG 34.6 34.6 34.6 51.6 51.6 51.6 69.6 ACAC STD STD STD STD STD STD STD CHAMPION GASOLINE AIR COMPRESSORS • Truck Bed Mountable, ideal for Field Service Applications • Heavy Duty Two-Stage Compressors • V-Belt Drive with Totally Enclosed Belt Guard • Centrifugal unloader for loadless start prolongs motor life • Gasketless Design • Vibration Isolators Included on 30 gallon models • Each new assembled unit comes with a three-year standard warranty, six-year extended warranty ASCOT NO. MFG. NO. DESCRIPTION KITS 106-37831 CC1137831 KOHLER KIT: Maintenance Kit for 14HP Kohler Engine Gasoline Air Compressor. Includes: Prefilter, air filter, spark plug, fuel filter, engine oil, Champion air filter and compressor oil 106-37832 CC1137832 HONDA KIT: Maintenance Kit for 13HP Honda Engine Gasoline Air Compressor. Includes: Air filter, spark plug, engine oil, Champion air fliter and compressor oil ASCOT NO. 102-11530 102-11560 102-11880 102-13730 102-13760 102-13780 MFG. NO. HP OR HPD TANK SIZE 30 13 13 13 14 14 14 60 80 30 60 80 HGR7-3H HGR7-6H HGR7-8H HGR7-3K HGR7-6K HGR7-8K TANK CONFIG. Horiz. Horiz. Horiz. Horiz. Horiz. Horiz. ENGINE TYPE Honda Honda Honda Kohler Kohler Kohler ACFM @175 PSIG 23.2 23.2 23.2 23.2 23.2 23.2 RPM 1025 1025 1025 1025 1025 1025 434 500 539 434 500 539 APPROX. SHIP WEIGHT (LBS.) WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS

16 AIR SYSTEMS RV Series RV-SERIES RECIPROCATING AIR COMPRESSORS • Two-stage, splash lubricated compressor pump • 5 - 15 HP • Up to 175 PSIG • 17.3 - 49 ACFM at 175 PSIG rating • Tank mounted, vertical or horizontal configuration • Automatic start/stop operation • Factory filled with ChampLub AC lubricant • Mounted Magnetic Starters standard on all Centurion II models (Except for 5 HP models with 3450 RPM motors) MOUNTED MAGNETIC STARTER 125 PSI RATING* ASCOT NO. MFG. NO. HP 101-65801 101-67581 101-67514 101-67583 101-67515 7.5 7.5 7.5 TANK SIZE PUMP MFG NO. 120 RV-30A 80 RV-15A 120 RV-30A RPM 670 670 670 CFM DISPL. VRV5-8 **5 80 RV-15A 805 23.5 VRV7F-8 **7.5 80 RV-15A 990 28.7 HRV7-12 VRV7-8 VRV7-12 101-61212 HRV10-12 10 120 RV-30A 810 101-61081 VRV10-8 10 80 RV-30A 810 101-61012 VRV10-12 10 120 RV-30A 810 101-61512 HRV15F-12 15 120 RV-30A 1045 101-61513 VRV15F-12 15 120 RV-30A 1045 39.6 39.6 39.6 47.3 47.3 47.3 60.9 60.9 175 PSI RATING* RATING CFM DEL’Y RPM 17.3 23.1 25.8 25.8 25.8 34.8 34.8 34.8 49 49 CFM DISPL. 715 20.8 975 570 570 570 699 699 699 1020 1020 *Units tested in accordance with CAGI/PNEUROP Acceptance Test Code PH2CPTC2 RATING CFM DEL’Y 16.5 28.6 22.1 31.9 31.9 31.9 40.7 40.7 40.7 59.5 59.5 24.0 24.0 24.0 32 32 32 46.8 46.8 DIMENSIONS (LXWXH) 33" x 26-5/8" x 76" 33" x 26-5/8" x 76" 72.5" x 24" x 54" 33" x 26-5/8" x 76" 42.5" x 30" x 79" 72.5" x 24" x 54" 42.5" x 30" x 66.75" 42.5" x 30" x 79.75" 72.5" x 24" x 54" 46-3/8" x 30" x 79.75" **Available with either 1750 or 3450 RPM. Starter not required for 5HP 3450RPM motor. Starter required for 7.5HP 3450RPM motor. APPR SHIP Centurion 101-65801 CENTURION II | 13 HP RECIPROCATING COMPRESSOR/GENERATOR • Two-stage splash lubricated RV15A compressor pump • Honda GX390 engine with electric start • Industrial 4000-watt generator with (2) 120V, 15 amp and (1) 240V, 20 amp receptacles • Twin 4-gallon horizontal air receiver tanks • Manual receiver drain valve • Lifting hook • Belt drive with totally enclosed belt guard • Gas pilot valve • Comprehensive base plate • INCLUDES: (2) Pressure gauges - the left gauge indicates tank pressure and the right gauge indicates output pressure; adjustable pressure regulator; pressure relief valve, air socket 101-73904 GAS CONTINUOUS ASCOT NO. MFG. NO. PART. NO. ENGINE MODEL 101-73904 HGRV7-LPH-G CC1153480 HONDA GX390 HP 13 TANK CAP. (GAL) (2) 4 PUMP MFG NO. RV-15A GENERATOR WITH COMP OFF-LOAD 3500 watts MAX. AC OUTPUT RPM 4000 watts 784 CFM DISPL. 22.9 175 PSI RATING* RATING CFM DEL’Y 17.9 DIMENSIONS (LXWXH) 46" x 22" x 35" APPROX. SHIP WEIGHT (LBS.) 490 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS

AIR SYSTEMS 17 Evolution EVOLUTION: QUIET ENCLOSED RECIPROCATING AIR COMPRESSORS • Sound levels as low as 67dBA • 12-gauge steel enclosure • Separate compressor and motor chambers with dedicated cooling circuits provide cooler operation and long-life • Separate inner base reduces vibration and noise • Oil-site gauge and filter maintenance indicator provide notification of routine maintenance • Innovative Belt-tensioning system LOW SOUND LEVELS ASCOT NO. MFG. NO. 101-58000 HER5-8 101-78000 HER7F-8 HP 5 7.5 TANK CONFIG. LONG LIFE TANK CAP. (GAL.) PUMP MFG. NUMBER Horiz. 80 RP-15B 734 Horiz. 80 RP-15B 990 RPM APPROX. SHIP WEIGHT (LBS.) 733 Lbs. 762 Lbs. 101-58000 CHAMPION MAINTENANCE PARTS CHAMPION VOLTAGE CONVERSION KITS • If 460V, 3 phase service is needed voltage conversion kits are available ASCOT NO. MFG. NO. 106-28530 106-89090 106-94730 117-05050 117-05051 106-11882 M2853 P08909A P09479A P05050A P05051A Z11882 106-11883 106-11884 106-13194 106-00519 Z11883 Z11884 CC1031194 M519C DESCRIPTION Pilot Unleader Valve for Gas Compressors Champion Oil, 1-Gallon Champion Oil, 1-Quart Filter Element for Gas and Small Electric Units Filter Element for Large Electric Units Compressor Service Kit for RV-15/R-15 Pump INCLUDES: Lubricant, Air Filters & Oil Filter Compressor Service Kit for RV-30/R-30 Pump INCLUDES: Lubricant, Air Filters & Oil Filter Compressor Service Kit for R-40 Pump INCLUDES: Lubricant, Air Filters & Oil Filter Engine Maintenance Kit for 13 HP Gas Compressors Replacement 1/4 NPT Gauge for Compressors 106-11727 ASCOT NO. MFG. NO. 106-11727 106-11728 106-11729 106-11730 DESCRIPTION TEN011727 TEN011728 TEN011729 TEN011730 Voltage Conversion Kit, Simplex – 5HP and 7.5HP from 230V/3 Phase to 460V/3 Phase Voltage Conversion Kit, Simplex – 10HP from 230V/3 Phase to 460V/3 Phase Voltage Conversion Kit, Simplex – 15HP from 230V/3 Phase to 460V/3 Phase Voltage Conversion Kit, Simplex – 25HP from 230V/3 Phase to 460V/3 Phase WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS

18 AIR SYSTEMS L-SERIES Rotary Screw Air Compressors The Champion L-Series Rotary Screw Compressors are highly competitive, expertly-designed packages that use the latest design techniques to give you industry-leading reliability, performance, and value. When used in 100% duty cycle applications, Rotary Screw compressors from Champion are a great, quiet alternative to a reciprocating compressor. STANDARD FEATURES: • Advanced but simple package design lowering maintenance and service costs and lengthening service life • Belt-driven • Integrated Airends ensure superior serviceability • Available in fixed and variable speed • State-of-the-art dual position pilot controller • High-quality, sound -insulating enclosure panels • Low-noise, thermostaticallycontrolled, motor-driven fan • Tank or basemount with optional dryer configurations (AirStation) • Zero air-loss auto tank drain on Air Station • L- SERIES WARRANTY: Standard one-year warranty on package, premium ten-year warranty available BELT DRIVEN ADVANCED DESIGN 101-71023 105-00750 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS

AIR SYSTEMS 19 LV/LVR-Series Rotary Vane Air Compressors LV-Series: Duplex LV-Series: Simplex Refrigerated Air Dryers REFRIGERATED AIR DRYERS - SPECIAL FEATURES: • Effective moisture removal at all flow rates • Optional pre and post filtration available for dryer • Ideal for air compressors equipped with an air cooled aftercooler ASCOT NO. MFG. NO. 105-00015 105-00025 105-00035 105-00050 105-00075 FLOW VOLTAGE CGD15A1 15 CGD25A1 25 CGD35A1 35 CGD50A1 50 CGD75A1 75 105-00100 CGD100A1 100 105-00125 CGD125A1 125 105-00150 CGD150A1 150 115/1 115/1 115/1 115/1 115/1 115/1 115/1 115/1 IN/OUT CONNECT. 3/8" OD 3/4" 3/4" 3/4" 1" 1" 1" 1" SIZE (LXWXH) 15x13x13 22x16x15 22x16x15 22x20x20 24x15x33 24x15x33 24x15x33 24x15x37 APPROX. SHIP WEIGHT (LBS.) 69 88 92 101 123 129 135 148 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS

20 AIR SYSTEMS C-Aire Compressors C-AIRE SIMPLEX COMPRESSORS • Oversized after coolers remove over 60% of water vapor, humidity or moisture • Large displacement 3-cylinder pumps run slower thus increasing the longevity and contributes to them being quieter • ALL UNITS INCLUDE: Ball valve, tank drain, oil drain tube, full synthetic oil, large sight glass and liquid fill gauge • Installation kit only included with Fully Packaged units (4 mounting pads, 4 anchor bolts, 12" steel braided flex hose) SIZING A COMPRESSOR APPLICATION GUIDE 101-75080 ASCOT NO. MFG. NO. HP STAGE 101-50080 A050V080-1230 5 101-75080 A075V080-1230 7.5 2 2 CFM @175 PSIG 17 24 PUMP 2 Cylinder Cast Iron 3 Cylinder Cast Iron PUMP RPM 649 MAIN BEARINGS 885 50,000 Hours 50,000 Hours OIL Full Synthetic Full Synthetic VOLTS 208/230, 1 Phase 208/230, 1 Phase AMPS 21@208V, 19.1@230V 33.3@208V, 31.3@230V MOTOR RPM BREAKER SIZE 1745 40 Amp 1760 50 Amp TANK SIZE (GAL.) 80 80 DIMENSIONS (LXWXH) 35" x 24" x 70" 34" x 24" x 73" WT. (LBS.) 515 625 C-AIRE GAS ENGINE COMPRESSOR • Two-Stage compressor that is just the right size for a service truck using a 1" or 3/4" impact wrench and is great for farm service use • INCLUDES: Ball valve, Honda engine, electric start, engine idle down, oil drain tube, tank drain, large displacement 3 cylinder pumps, large oil sight glass, liquid filled gauge, full synthetic oil & mounting pads GAS ENGINE TWO STAGE 102-13030 ASCOT NO. MFG. NO. 102-13030 HP A130H030-G 13 STAGE CFM @175 PSIG 2 26 PUMP 3 Cylinder Cast Iron PUMP RPM MAIN BEARINGS 50,000 Hours 745 OIL Full Synthetic MOTOR RPM 800 TANK SIZE (GAL.) 30 DIMENSIONS (LXWXH) 42" x 17" x 45" WT. (LBS.) 474 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS

AIR SYSTEMS 21 Ingersoll Rand Air Compressors TWO-STAGE ELECTRIC “VALUE PACKAGE” • Priced right and designed for the most demanding applications where a dependable air supply is required • EACH PACKAGE INCLUDES: A two-stage cast iron compressor pump, ODP electric motor, magnetic motor starter (mounted and wired), automatic start and stop pressure switch control, mounted on an ASME rated receiver tank • Available voltages: 230/1/60 (5-7.5 HP), 200/3/60, 460/3/60 • Pressure up to 175 PSIG • Oil sight glass included on 10-15 HP Packages ASCOT NO. MFG. NO. 101-23451 101-24705 101-24751 101-25452 101-71150 2340L5-V 2475N5-V HP 5 5 2475N7.5-V 7.5 2545E10-V 10 7100E15-V 15 ACFM @175 PSIG 14.7 16.8 24 35 50 TANK 60 Gallon Vertical 80 Gallon Vertical 80 Gallon Vertical 120 Gallon Horizontal 120 Gallon Horizontal 101-24751 TWO-STAGE GASOLINE ENGINE DRIVEN • Ideal for fleet or field service applications with truck bed mounting design • Idle engine control and electronic ignition for easier starting • Powder coat paint finish to protect against outdoor elements • 30-gallon ASME receiver and OSHA fully enclosed belt guard for worker safety ASCOT NO. MFG. NO. 102-24125 102-24212 HP ENGINE 2475F14G 14 Kohler 2475F13.GH 13 Honda ACFM @175 PSIG 25 25 TANK 30 Gallon Horizontal 30 Gallon Horizontal 102-24125 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS

22 AIR SYSTEMS Ingersoll Rand Air Compressors (cont.) TWO-STAGE ELECTRIC “FULLY PACKAGED” • Everything you need for a dependable air supply with minimal maintenance • FULLY PACKAGED COMPRESSORS INCLUDE: Magnetic motor starter, air cooler and electric drain valve which removes harmful moisture, plus, the added protection of a low oil level shutdown switch • AVAILABLE VOLTAGES: 230/1/60 (5-7.5 HP), 200/3/60, 460/3/60 INGERSOLL-RAND START-UP MAINTENANCE KITS • All the parts needed to maintain your compressor for a full year, plus the added protection of extended warranty coverage are two very distinct advantages you’ll gain with the All Season Select synthetic pump lubricant and replacement air filter elements • Kits for gasoline engine driven compressors also include engine air filter, oil filter and engine oil FULLY PACKAGED ALL PARTS NEEDED FOR A FULL YEAR 101-71153 ASCOT NO. MFG. NO. 101-27550 101-27551 101-27552 101-27553 101-71153 2475N5-P 2475N7.5-P 2545K10-P 2545E10-P 7100E15-P HP 5 7.5 10 10 15 ACFM @175 PSIG TANK 16.8 24 35 35 50 80 Gallon Vertical 80 Gallon Vertical 120 Gallon Vertical 120 Gallon Horizontal 120 Gallon Horizontal ASCOT NO. MFG. NO. 106-24305 106-24710 106-30020 106-24712 32305880 32305898 32305906 32305872 Ingersoll Rand 2340/2475 Electric Air Compressor Start Up Kit Ingersoll Rand 2545/7100 Electric Air Compressor Start Up Kit Ingersoll Rand 15ST Electric Air Compressor Start Up Kit Ingersoll Rand 2475F12.5G Kohler Gas Compressor Start Up Kit DESCRIPTION BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS

AIR SYSTEMS 23 NITROGEN PERCENTAGE INDICATOR Branick Nitrogen Inflation Systems BRANICK 130 NITROGEN INFLATION SYSTEM 119-00011 • Accurate and easy to use • Compact and ergonomic in design • Simple to operate, one button design • Battery charge indicator • Auto-power off function • Replaceable battery and sensor • Auto diagnostic with error code to simplify troubleshooting ASCOT NO. MFG. NO. 119-00011 Nitro-1 DESCRIPTION Nitrogen Purity Gauge The MODEL 130 can be used with a nitrogen bottle or connected to a nitrogen generator to inflate up to 6 (4 hoses included) tires with high purity nitrogen. The integrated auto-inflator has a pressure range up to 145 psi and performs top-offs as well as automated nitrogen conversions, just set the pressure and the inflator does the rest. Branick equipment lasts and our Model 130 is no different, with all steel construction to take everyday use. The rechargeable battery has a visible charging indicator to let you know when you’re ready to go. The mobility and features of the Model 130 make nitrogen service simple, fast and economical. • Hands Free Auto-inflator • Convert up to 6 tires (requires 2 optional hoses) • Rechargeable battery with indicator • Convenient parts tray • Durable all-steel construction 119-00485 ASCOT NO. MFG. NO. 119-00485 485 DESCRIPTION Branick 485 Nitrogen Inflation System VALVE CAPS FOR NITROGEN INFLATED TIRES BRANICK 485 NITROGEN INFLATION SYSTEM 468-00207 ASCOT NO. MFG. NO. 468-00307 468-00607 468-10100 468-17492 468-20695 TS-OR NITSLV VC10 17-492LG 20695 DESCRIPTION 468-00207 Cap PG Green Plastic Nitrogen Cap Green Valve O-ring Nitrogen Sleeve Blue Plastic Nitrogen Caps (100/Box) Green Plastic Cap for Long Sleeve TPMS Snap-in Valves Green Plastic Nitrogen Cap with Long Skirt for 20008 Snap-in TPMS Valve (100/Box) 468-26541 468-43607 468-59019 468-59021 6541N-2 436075 59-0019 59-0021 Dill Double Seal Cap with Green Sleeve High Quality Green Stamped Chrome Aluminum Nitrogen Valve Cap (100/Box) Chrome Nitrogen Valve Cap (100/Box) 468-43607 468-10100 468-59019 468-00607 468-00307 • The 485 is totally automatic and completely mobile, enabling the operator to wheel the unit directly to any vehicle • Zero installation costs • No electrical requirements to operate • Industrial grade HD battery • Efficient membrane • Low maintenance cost • Connect to any air-line and you’re inflating tires. Plug and Play! OT NO. MFG. NO. 119-00130 130 DESCRIPTION Branick 130 Nitrogen Inflation System WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS

24 AIR SYSTEMS ELECTRIC AUTOMATIC COMPRESSOR DRAIN • Automatically drains filters, compressor tanks, drip legs, aftercoolers and receivers • Opens and closes valve in 1 to 60 minute cycle times and 1 to 30 second blow down time • 1/4" NPT connection • Includes Y-strainer ASCOT NO. MFG. NO. 117-05702 5702S DESCRIPTION Electric Automatic Compressor Drain MINI IN-LINE DISPOSABLE DESICCANT DRYER • Point-of-use, patented, disposable, mini in-line desiccant dryer removes water vapor, oil vapor and dirt • Point-of-use on blow guns or spray guns as final protection for critical parts during blow off and paint spraying • See-through housing shows desiccant bead color change from blue to pink indicating dryer needs to be replaced • 1/4" NPT connection ASCOT NO. MFG. NO. 117-00010 DFD-10 DESCRIPTION QTY. Disposable Desiccant Dryer 2 117-00010 IN-LINE AIR TOOL FILTER • In-line filter protects air tools from dirt and debris • 1-9/16" length, 1/2 oz. • 40 micron sintered bronze element • Inlet can be attached directly to pneumatic tools • 1/4" male x 1/4" female NPT ASCOT NO. MFG. NO. 117-09132 9132 DESCRIPTION In-Line Air Tool Filter 117-09132 ASCOT NO. MFG. NO. 117-05304 DESCRIPTION T53-04W Automatic Drain 117-05304 117-05702 AUTOMATIC COMPRESSOR DRAIN • Automatically expels liquids from piping network in compressed air systems • Use in low spots in an air system where water accumulates • Float type drain features a protective stainless steel screen with umbrella baffle, providing large sump area for oil, sludge and dirt • 1/2" NPT top threaded port HOW TO DETERMINE THE GALLONS OF WATER ACCUMULATED PER 8 HOURS OF USE Follow the steps below to determine the gallons of water accumulated by a compressed air system per 8 hours of use: 1. Determine the ambient temperature (outside temperature surrounding the dryer) and relative humidity. 2. Locate ambient temperature in first column of water factor chart. 3. Follow the row over to percent of humidity. This indicates the number of gallons accumulated by your air compressor in an 8-hour period. Ambient Air Temperature 120°F 110°F 100°F 90°F 80°F 70°F 60°F 50°F 40°F 30°F 20°F 10°F 20% Humidity 18.6 14.1 10.5 7.8 5.7 3.9 2.7 2.1 1.2 .9 .6 .3 30% Humidity 27.9 21.0 15.6 11.4 8.4 6.0 4.2 3.0 2.1 1.2 .9 .5 40% Humidity 50% Humidity 46.5 35.1 26.1 19.2 13.8 9.9 6.9 4.8 3.3 2.1 1.5 .8 60% Humidity 55.8 42.0 31.2 23.1 16.8 12.0 8.4 6.0 3.9 2.7 1.7 1.0 70% Humidity GALLONS OF WATER PER 8 HOURS @ 100 SCFM 37.2 27.9 20.7 15.3 11.1 7.8 5.7 3.9 2.7 1.8 1.2 .7 65.1 48.9 36.6 26.7 19.5 13.8 9.9 6.9 4.8 3.0 1.9 1.2 80% Humidity 74.4 55.8 41.7 30.6 22.2 15.9 11.1 7.8 5.4 3.6 2.1 1.4 90% Humidity 83.7 63.0 46.8 34.5 24.9 18.0 12.6 8.7 6.0 3.9 2.4 1.5 100% Humidity 93.0 69.9 52.2 38.4 27.9 19.8 14.1 9.9 6.6 4.5 2.7 1.8 Water factor chart number is 31.2 Compressed air system accumulates 31.2 gallons of water per 8 hours of use. EXAMPLE: 25HP air compressor delivers 100 SCFM. Ambient Temp. = 100°F Relative Humidity = 60% BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS

AIR SYSTEMS 25 Filters and Regulators FILTER/REGULATOR COMBINATION UNITS • Combines filter and pressure regulator into one space saving unit • Output performance equal to an individual filter and regulator • Reduced pressure outputs of 0-125 PSIG • FEATURES THREE POSITION NON-RISING KNOB: push to lock, pull to adjust, detach to make tamper resistant • Available in metal bowl or polycarbonate bowl with metal bowl guard A GOOD FILTRATION SYSTEM APPLICATION GUIDE 114-75301 ASCOT NO. 114-75200 114-75201 114-75202 114-75203 114-75300 114-75301 114-75302 114-75303 114-00754 114-75400 114-75401 114-75402 114-75403 MFG. NO. B752T B752WT B752FW B752Z B753T B753WT B753FW B753Z B754T B754WT B754FW B754Z PIPE SIZE 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" B754GW 1/2" 1/2" 1/2" 1/2" 1/2" ADJUSTMENT TYPE T-Handle T-Handle Knob Knob T-Handle T-Handle Knob Knob Knob T-Handle T-Handle Knob Knob MAX. FLOW SCFM 50 50 50 50 80 80 80 80 100 100 100 100 100 *NOTE: Gauge not included. Sold separately. Ascot part number indicated. BOWL CAPACITY 5 Oz. 6 Oz. 6 Oz. 5 Oz. 5 Oz. 6 Oz. 6 Oz. 5 Oz. 6 Oz. 5 Oz. 6 Oz. 6 Oz. 5 Oz. BOWL TYPE Poly Metal Metal Poly Poly Metal Metal Poly Metal Poly Metal Metal Poly DRAIN Manual Manual Float Auto Piston Auto Manual Manual Float Auto Piston Auto Manual Manual Manual Float Auto Piston Auto GAUGE PART NO. 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* Included 117-01481* 117-01481* 117-01481* 117-01481* OPERATING TEMP. 40-125°F 40-175°F 40-125°F 40-125°F 40-125°F 40-175°F 40-125°F 40-125°F 40-175°F 40-125°F 40-175°F 40-125°F 40-125°F MAX. PRESSURE 150 PSIG 250 PSIG 175 PSIG 150 PSIG 150 PSIG 250 PSIG 175 PSIG 150 PSIG 250 PSIG 150 PSIG 250 PSIG 175 PSIG 150 PSIG MODULAR UNITS • UNITS INCLUDE: A filter, regulator and lubricator and/or filter, regulator and oil removing filter • Units equipped with or without OSHA safety lock-out valves • Gauge included • Screwdriver only tool needed to connect or disconnect units • Insert interlocking feature allows simple installation in any location 114-03354 ASCOT NO. 114-03352 114-13352 114-03353 114-13353 114-03354 114-13354 MFG. NO. C33352W VC33352W C33353W VC33353W C33354W VC33354W PIPE SIZE 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" MAX. FLOW SCFM 100 100 100 100 100 100 BOWL CAPACITY 6 Oz. 6 Oz. 6 Oz. 6 Oz. 6 Oz. 6 Oz. BOWL TYPE Metal Metal Metal Metal Metal Metal DRAIN Manual Manual Manual Manual Manual Manual LOCKOUT DRAIN Not Included Included Not Included Included Not Included Included OPERATING TEMP. 40-175°F 40-175°F 40-175°F 40-175°F 40-175°F 40-175°F MAX. PRESSURE 250 PSIG 250 PSIG 250 PSIG 250 PSIG 250 PSIG 250 PSIG WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS

26 AIR SYSTEMS GENERAL PURPOSE FILTERS • Removes harmful water condensate, pipe scale, dirt and rust from your compressed air system • Prevents corrosive damage to compressed air equipment and finished products • Protects components and air tools from premature failure • Installed upstream of regulators to prevent valve failure • Also used as pre-filters to oil removing and coalescing filters to ensure high efficiency and long element life in applications such as paint spraying, instrumentation and pharmaceuticals • Porous sintered bronze element 111-30002 ASCOT NO. 111-30002 111-35200 111-35201 111-35202 111-35203 111-35300 111-35301 111-35302 111-35303 111-35400 111-35401 111-35402 111-35403 111-37600 111-37601 111-32908 111-32910 111-32912 MFG. NO. F300-02 F352 F352W F352Z F352FW F353 F353W F353Z F353FW F354 F354W F354Z F354FW F376W F376FW F329-08 F329-10W F329-12W PIPE SIZE 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 1" 1-1/4" 1-1/2" MAX. FLOW SCFM 27 48 48 48 48 75 75 75 75 100 100 100 100 230 230 300 400 425 BOWL CAPACITY 1 Oz. 5 Oz. 6 Oz. 5 Oz. 6 Oz. 5 Oz. 5 Oz. 6 Oz. 6 Oz. 5 Oz. 6 Oz. 5 Oz. 6 Oz. 10 Oz. 10 Oz. 29 Oz. 29 oz. 29 oz. BOWL TYPE Poly Poly Metal Poly Metal Poly Metal Poly Metal Poly Metal Poly Metal Metal Metal Metal Metal Metal DRAIN Manual Manual Manual Piston Auto Float Auto Manual Manual Piston Auto Float Auto Manual Manual Piston Auto Float Auto Manual Float Auto Manual Manual Manual 111-35201 OPERATING TEMP. 40°-125°F 40°-125°F 40°-160°F 40°-125°F 40°-120°F 40°-125°F 40°-160°F 40°-125°F 40°-120°F 40°-125°F 40°-160°F 40°-125°F 40°-120°F 40°-160°F 40°-120°F 40°-160°F 40°-160°F 40°-160°F MAX. PRESSURE 150 PSIG 150 PSIG 250 PSIG 150 PSIG 175 PSIG 150 PSIG 250 PSIG 150 PSIG 175 PSIG 150 PSIG 250 PSIG 150 PSIG 175 PSIG 250 PSIG 175 PSIG 250 PSIG 250 PSIG 250 PSIG 111-32908 FILTER ELEMENT 20 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron 40 micron COALESCING/OIL REMOVING FILTERS • Removes submicron particles, particularly oil • APPLICATIONS INCLUDE: Paint spraying, pneumatic control instrumentation, printing and protection of air bearings • For maximum efficiency, a pre-filter needs be to installed upstream of oil-removing filter • Bonded end seals eliminate aerosol leakage past the element • Inner and outer support ribs are chemical resistant and strengthen element structure • Drain layers allow filtered elements to drop to bottom of filter with barrier to prevent reentry of drops to downstream air 115-55301 ASCOT NO. 115-55200 115-55201 115-55300 115-55301 115-55400 115-55401 115-57601 115-50508 115-50810 115-50812 MFG. NO. F552FW F552W F553FW F553W F554FW F554W F576W F508-08W F508-10W F508-12W PIPE SIZE 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 1" 1-1/4" 1-1/2" MAX. FLOW SCFM 24 24 37 37 37 37 60 300 300 400 BOWL CAPACITY 6 Oz. 6 Oz. 6 Oz. 6 Oz. 6 Oz. 6 Oz. 10 Oz. 29 Oz. 60 Oz. 60 Oz. BOWL TYPE Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal DRAIN Float Auto Manual Float Auto Manual Float Auto Manual Manual Manual Manual Manual OPERATING TEMP. 40°-120°F 40°-160°F 40°-120°F 40°-160°F 40°-120°F 40°-160°F 40°-160°F 40°-160°F 40°-160°F 40°-160°F 115-57601 MAX. PRESSURE 175 PSIG 250 PSIG 175 PSIG 250 PSIG 175 PSIG 250 PSIG 250 PSIG 250 PSIG 250 PSIG 250 PSIG FILTER ELEMENT .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron .03 micron BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS

AIR SYSTEMS 27 Regulators and Lubricators REGULATORS • Specialized control valve reduces upstream supply pressure level to a specified constant downstream pressure • Regulates air pressure of the airline • Self-relieving style units • Available in T-handle or adjustment knob • Adjustment knob features three position non-rising knob: push to lock, pull to adjust, detach to make tamper resistant • Reinforced diaphragm for repeated accuracy 112-00378 ASCOT NO. 112-00162 112-00262 112-00352 112-00353 112-00354 112-00376 112-00378 112-03910 112-03912 112-01352 112-01354 MFG. NO. R162 R262** R352 R353 R354T R376T R378T R3910 R3912 R352T R354GH PIPE SIZE 1/4" 1/4" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" MAX. FLOW SCFM 25 25 50 80 100 220 250 700 700 ADJUSTMENT TYPE Adjustment Knob Adjustment Knob Adjustment Knob Adjustment Knob T-Handle T-Handle T-Handle T-Handle T-Handle PRESSURE GAUGE PART NO. 117-01681* 117-01681* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 117-01481* 112-00352 GAUGE PART 1/8" NPT 1/8" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT (2) 1/4" NPT 1/4" Regulator - T-Handle 1/2" High Pressure Regulator - 10 to 250 PSI 112-00262 OPERATING TEMP. 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F 40°-120°F OPERATING PRESSURE 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG 5 to 125 PSIG LUBRICATORS • Injects a fine stream of oil into the air stream to automatically lubricate air operated tools and other devices • Extends life of downstream components • Precise control of oil feed with needle valve adjustment knob • Adds minimal pressure drop to the air system • Features three position non-rising knob: push to lock, pull to adjust, detach to make tamper resistant • High air flow • Precise visual adjustment control • Low flow to establish drip rate • “W” is with sight glass and metal bowl 113-00353 ASCOT NO. MFG. NO. 113-00352 L352 113-01352 113-00353 113-01353 113-00354 113-01354 113-00376 113-04108 L352W L353 L353W L354 L376W 4108W PIPE SIZE 1/4" 1/4" 3/8" 3/8" 1/2" L354W 1/2" 3/4" 1" MAX. FLOW SCFM 16 16 82 82 142 142 142 175 BOWL CAP. 5 Oz. 5 Oz. 5 Oz. 5 Oz. 5 Oz. 5 Oz. 10 Oz. 29 Oz. BOWL TYPE Poly OPERATING TEMP. 40°-125°F Metal 40°-175°F Poly 40°-125°F Metal 40°-175°F Poly 40°-125°F Metal 40°-175°F Metal 40°-125°F Metal 40°-160°F MAX. PRESSURE 113-01353 OIL DELIVERY 150 PSIG 2 SCFM 200 PSIG 2 SCFM 150 PSIG 2 SCFM 200 PSIG 2 SCFM 150 PSIG 2 SCFM 200 PSIG 2 SCFM 150 PSIG 2 SCFM 250 PSIG 2 SCFM 117-01481 117-11481 117-01681 117-05200 1481 1481B 1681 5200 ACCESSORIES FOR FILTERS, REGULATORS & LUBRICATORS ASCOT NO. MFG. NO. 117-00055 EK55 DESCRIPTION .03 Micron Coalescing Filter Element Replacement 117-00329 117-00355 117-00935 EKF329 EK35-5 PMKR35 40 Micron Filter Element - Fits 3/4" Units 5 Micron Filter Element - Fits 1/4", 3/8" & 1/2" Units Filter/Regulator Mounting Kit 1/4" Back Mount Gauge 1/4" Back Mount Gauge - 0-300 PSI 1/8" Back Mount Gauge Internal Drain Assembly WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS

28 AIR SYSTEMS Hose Reels PREMIUM INDUSTRIAL HOSE REELS • Compact design allows reels to fit into tight locations • Corrosion resistant powder coated paint • Extended service life due to permanently lubricated bearings and swivels • Versatile applic include easy mounts on w floor, ceiling or truck • Air Water hose included • MADE IN THE USA MADE IN THE USA • Compact design • Substantial support • Air/Water (OLP), Oil (OMP) or Grease (OHP) • All-steel construction with engineered ribs/forms • Baked-on powder coat finish provides corrosion resistance • MADE IN THE USA ASCOT NO. 124-04435 125-04625 125-05450 125-05635 125-05650 126-05850 126-15650* 126-15851* MFG. NO. 4435 OLP 4625 OLP 5450 OLP 5635 OLP 5650 OLP A5850 OLP B5650 OLP B5850 OLP RT SERIES HOSE REELS • Adjustable guide arm locates to seven positions • Oversized main shaft increases support • Long life drive spring • Easy to mount due to slotted mounting holes for safer and easier installation • Air/Wat hose included • Models RT650OLPG and RT850-OLPG specific designed for dispensing nitr ASCOT NO. 124-04500 125-06350 125-06500 126-08500 MFG. NO. RT450-OLP RT635-OLP RT650-OLP RT850-OLP HOSE ID 1/4" 3/8" 3/8" 1/2" HOSE OD .475 .600 .600 .750 HOSE LENGTH 50' 35' 50' 50' HOSE PSI MADE IN THE USA HOSE ID 1/4" 3/8" 1/4" 3/8" 3/8" 1/2" 3/8" 1/2" HOSE OD .475 .600 .475 .600 .600 .750 .600 .750 HOSE LENGTH 35' 25' 50' 35' 50' 50' 50' 50' HOSE PSI TEMP. 300 150˚F 300 150˚F 300 150˚F 300 150˚F 300 150˚F 300 150˚F 300 150˚F 300 150˚F ASCOT NO. 125-07650 125-07670 126-07850 125-07651 126-07851 124-07450 125-07652 MFG. NO. 7650 OLP 7670 OLP 7850 OLP 7650 OMP 7850 OMP 7450 OHP 7650 OHP DUAL PEDESTAL HOSE REELS • Compact dual pedestal design • Features an innovative, non-welded, interlocking base • Stand up to heavy vibration, ideal f truck-mounted applications • Dual pedestal base and guide arm are structurally reinforc • All-steel construction and baked-on powder coat finish • MADE IN THE USA TEMP. 300 150˚F 300 150˚F 300 150˚F 300 150˚F ASCOT NO. 124-75435 124-75450 124-77450 125-75635 125-75650 125-77650 126-75835 126-77850 MFG. NO. DP5435 OLP DP5450 OLP DP7450 OLP DP5635 OLP DP5650 OLP DP7650 OLP DP5835 OLP DP7850 OLP HOSE ID 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" HOSE OD .475 .475 .475 .600 HOSE LENGTH 35' 50' 50' 35' .600 50' .600 50' .750 .750 35' 50' HOSE PSI HOSE ID 3/8" 3/8" 1/2" 3/8" 1/2" 1/4" 3/8" HOSE OD .600 .600 .750 .690 .820 .580 .730 HOSE LENGTH 50' 70' 50' 50' 50' 50' 50' HOSE PSI HEAVY DUTY INDUSTRIAL REELS MADE IN THE USA TEMP. 300 150˚F 300 150˚F 300 150˚F 2600 210˚F 3000 210˚F 5000 210˚F 4800 210˚F MADE IN THE USA TEMP. 300 150˚F 300 150˚F 300 150˚F 300 150˚F 300 150˚F 300 150˚F 300 150˚F 300 150˚F BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS

AIR SYSTEMS 29 HEAVY DUTY MOBILE BASE HOSE REELS CORD REELS OPEN STYLE MADE IN THE • Designed to accommodate up to 100' of 3/8" I.D. hose or 75' of 1/2" I.D. hose • Slightly more robust than the standard 7000 series hose reels • The heavy duty base design, all st construction and a baked-on powder coat finish combine to produce a rugged, corrosion-resistant product • A newly redesigned latching mechanism provides longer service life of the latch components • The-one piec guide roller design and stainless steel pins offer greater strength and easier servic • The high quality, die cast aluminum hub and two sealed ball bearings produce a smoo rotation and easier operation • MADE IN THE US ASCOT NO. 125-76050 125-76070 125-76075 125-76100 126-78050 126-78075 126-79025 MFG. NO. HD76050 OLP HD76070 OLP HD76075 OLP HD76100 OLP HD78050 OLP HD78075 OLP HD79025 OLP HOSE ID 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 3/4" HOSE OD HOSE LENGTH .600 50 .600 .600 70 75 .600 100 .750 .750 1.075 50 75 25 HOSE PSI 300 300 300 300 300 300 250 USA • For indoor, non-weather-tight applications only • All models UL listed at 125 volt 60 hz single phase; reels without cord suitable for 220 volt • Incandescent bulb 75 watt maximum • Cord Included • MADE IN THE USA MADE IN THE USA TEMP. 150° F 150° F 150° F 150° F 150° F 150° F 150° F ASCOT NO. 312-40351 312-40501 MADE IN THE GENERAL INDUSTRIAL AIR/WATER • Full flow swivel and heavy gauge steel frame • All-bolted unitized construction with no welds to fatigue • Hand Crank (CA) and 12VDC Electric Motor (EA) driven • MADE IN THE USA USA 312-45454 312-45455 L 4545 123 9 L 4545 123 9G 312-40353 312-40503 312-45453 MFG. NO. L 4035 163 1 L 4050 163 1 L 4035 163 3 L 4050 163 3 L 4545 123 3 WIRE SIZE AWG NO. OF WIRES INCANDESCENT 16 16 SINGLE OUTLET 16 16 12 TRIPLE OUTLET 12 12 312-40504 L 4050 163 10 (LED) LED 16 3 3 3 3 3 3 3 3 CORD LENGTH 35' 50' 35' 50' 45' 45' 50' 50' VOLTS MAX. AMPS 125 10 125 10 125 13 125 13 125 15 125 15 125 15 125 13 ADJUSTABLE BUMPER STOPS • Solid molded rubber assuring long life and nonslip grip • Allow desired length of hose or cord to be permanently stored outside the reel ASCOT NO. 126-21120 126-21121 126-31120 126-31121 126-31180 MFG. NO. CA32112 L EA32112 L12D CA33112 L EA33112 L12D CA33118 L HOSE ID 1/2” 1/2” 3/4” 3/4” 3/4” HOSE OD .750 .750 1.075 1.075 1.075 HOSE LENGTH 200’ 200’ 100’ 100’ 175’ PSI 1000 1000 1000 1000 1000 ASCOT NO. MFG. NO. 127-11004 127-11043 127-21043 127-11040 DESCRIPTION 1-HR1004 1-HR1004-3 2-HR1004-3 1-HR1004-A 3/8" Hose, 2.5" Diameter 3/8" Hose, 3" Diameter 1/2" Hose, 3" Diameter 1/4" Hose, 2.5" Diameter 127-11004 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS

30 AIR SYSTEMS NITRO-PRO NITROGEN REEL • EZ-Coil controlled retraction for greater safety • Special C-SERIES LOW PRESSURE HOSE REELS “Nitrogen green” proprietary “CPC” powder-coated finish for long lasting durability • Factory-matched lubricated containerized spring motor for trouble free, enduring performance • 50' of green 3/8" I.D. nitrogen hose & adjustable hose stop • Nitrogen quality seals in the solid brass, 360-degree swivel inlet 127-05880 125-35000 ASCOT NO. 127-05880 MFG. NO. EZ-P-NP-350 HOSE ID 3/8" HOSE OD 5/8" HOSE LENGTH 50' HOSE PSI 300 ASCOT NO. MFG. NO. 125-35000 125-55000 LOW PRESSURE HOSE REELS FOR AIR AND WATER • High quality epoxy powder coated steel construction • Sturdy 1" solid steel axle with 1" self-lubricated precision bearings • Steel base plate and support post add stiffness reducing vibration • Multi-position guide arm adjusts to 10 different mounting positions • 8-position locking ratchet secures hose at desired length • Self-retracting spring return reels • Factory balanced cartridge-style spring motor provides safe maintenance • Solid brass NPT swivel with stainless steel stud bolts to reel • MADE IN THE U.S.A. 124-13500 ASCOT NO. 124-13500 124-15000 124-33500 125-35004 126-42500 126-43500 126-45000 126-52500 MFG. NO. P-LP-135 P-LP-150 P-LP-335 P-LP-350 P-LP-425 SH-N-435 SH-N-450 SH-N-525 HOSE ID 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" HOSE OD 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" 1-1/16" HOSE LENGTH 35' 50' 35' 50' 25' 35' 50' 25' HOSE PSI 250 250 250 250 250 250 250 250 MADE IN THE USA EVOLUTION AND CLASSIC SERIES • These field-proven hose reels are preferred for general duty, automotive dealerships and independent garages • Steel base and outlet arm, provide strength and rigidity • All reels include hose, hose stop, and a 2.5' connecting hose ASCOT NO. MFG. NO. 125-21408 125-21410 125-21215 2140-008 2140-010 2120-015 OPERATING PRESSURE 300 PSI 300 PSI 300 PSI HOSE ID 3/8" 1/2" 3/8" HOSE LENGTH 50' 30' 50' SHIP WEIGHT 44 Lbs. 46 Lbs. 60 Lbs. LC-350 LC-550 OPERATING PRESSURE 300 PSI 300 PSI HOSE ID 3/8" 1/2" HOSE LENGTH 50' 50' SHIP WEIGHT 54 Lbs. 60 Lbs. • Reels ideally suited for plant maintenance, service trucks or other industrial functions • Standard hose for air and water • Single set screw to access spring casing • Drive spring mechanism lubricated for life • One piece combination latch, spring arbor, main bearing and spool support for fewer moving parts • Durable powder coated finish • MADE IN THE US MADE IN THE USA 125-21408 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS

AIR SYSTEMS 31 Air Hoses and Accessories COATS REPLACEMENT AIR HOSE • For use with Coats Tire Changers • 60" long x 1/4" diameter • AC-1 Euro-style chuck • All brass connectors • Swivel fitting • Equivalent to Coats 806871 COUPLED AIR HOSES • Reinforced with heavy duty polyester cord • 325 PSI • EPDM abrasion resistant cover • Bend restrictors both ends • Premium machined brass alloy fittings • -40° to +20O° F MADE IN THE HEAVY DUTY MADE IN THE USA 127-86871 USA 121-01225 ASCOT NO. MFG. NO. DESCRIPTION 127-86871 ASCOT NO. MFG. NO. 121-01225 121-01250 121-03825 121-03851 DESCRIPTION 98101646 98101648 98101640 98101642 Coupled 1/2" x 25’ Reinforced Domestic Air Hose Coupled 1/2" x 50’ Reinforced Domestic Air Hose Coupled 3/8" x 25’ Reinforced Domestic Air Hose Coupled 3/8" x 50’ Reinforced Domestic Air Hose 1/4" BULK DOMESTIC AIR HOSE • Used in automotive, agricultural and construction applications • 1/4" ID x 325 PSI • Temp Range: -40°F to +200°F • Multi-spiral polyester yarn reinforcement makes hose easy to handle and very flexible • EPDM tube and cover resists abrasion, heat and ozone • MADE IN THE USA MADE IN THE USA 127-86872 HUNTER REPLACEMENT AIR HOSE • For use with Coats Tire Changers • 60" long x 1/4" diameter • Europeanstyle air chuck • All brass connectors • Packaged 1 per bag 86871-1 60" x ¼" Coats Replacement Air Hose (Packaged 1 per bag) MADE IN THE HEAVY DUTY 121-14700 ASCOT NO. MFG. NO. 121-14700 DESCRIPTION 91008400 1/4" x 700’ Domestic Bulk Air Hose (325 PSI) Reel ASCOT NO. MFG. NO. DESCRIPTION 127-86872 86872-1 60" x ¼" Hunter Replacement Air Hose (Packaged 1 per bag) USA WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS

32 AIR SYSTEMS 3/8" BLUE COIL HOSE • 25' length • 1/4" x 3/8" fittings • 150 PSI • Polyurethane tubing • Excellen resistance • Highly kink-resistan twisting or crushing • Easy to handle - 25% lighter than rubber • Made in Taiw HOSE CUTTER • Hand tool for straight, even, clean cut on heater, air conditioning and braided rubber or plastic hose up to 1-1/8" diameter 123-13825 ASCOT NO. MFG. NO. DESCRIPTION 137-10010 137-10011 10010 10011 Hose Cutter (2) High Grade Carbon S Replacement Blades ASCOT NO. MFG. NO. DESCRIPTION 123-13825 3/8x25 25' Blue Coil Hose - 1/4" x 3/8" Fittings - 150 PSI RED HANDLED HOSE CUTTER • Powder coated aluminum body • Heat treated stainless steel cutting blade BLUE RECOIL AIR HOSE • Highly kink-resistant, withstands twisting or crushing • Swivel fittings • 150 PSI • Polyurethane tubing • Excellent abrasion resistance • Easy to handle: 25% lighter than rubber • Ø3-36 mm rubber and reinforced hose cutter • Locking mechanism for safe storage ASCOT NO. MFG. NO. 137-11420 A11-420 BLOW GUNS • Non-restricted, full pressure performance • Sturdy, high-tech composite material • Lightweight ergonomic design • Variable air flow • 1/4" Female NPT DESCRIPTION Red Handled Hose Cutter 137-11420 137-10010 123-14025 123-38025 128-72021 ASCOT NO. MFG. NO. 123-14012 123-14025 123-14050 123-38025 123-38050 123-38150 DESCRIPTION 1/4x1/4x1/4x12 1/4x1/4x1/4x25 1/4x1/4x1/4x50 3/8x1/4x1/4x25 1/4" Blue Recoil Air Hose - 1/4" x 1/4" Swivel Fittings (12' Length) 1/4" Blue Recoil Air Hose - 1/4" x 1/4" Swivel Fittings (25' Length) 1/4" Blue Recoil Air Hose - 1/4" x 1/4" Swivel Fittings (50' Length) 3/8" Blue Recoil Air Hose - 1/4" x 1/4" Swivel Fittings (25' Length) 3/8x1/4x1/4x50 3/8" Blue Recoil Air Hose - 1/4" x 1/4" Swivel Fittings (50' Length) 3/8x3/8x3/8x25 3/8" Blue Recoil Air Hose - 3/8" x 3/8" Swivel Fittings (25' Length) 128-72023 ASCOT NO. MFG. NO. 128-72021 128-72022 128-72023 128-72024 128-72025 NOZZLE DESCRIPTION 27202OSH Venturi Silent 27202SIL 27202PRE Standard 27202ECR 27202MTL Metal High-output, OSHA-compliant Quiet, OSHA Compliant Standard, non-Scratch Nozzle Air Shield Unique Air Shield Nozzle Durable Metal Nozzle 128-72025 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS

AIR SYSTEMS 33 Air Line Couplers and Plugs A TYPE 1/4” LINCOLN LONG NOSE • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Interchange with Lincoln “Long Nose Series” as well as units produced by other manufacturers 131-61486 ASCOT NO. 131-61486 131-61548 131-61550 131-61551 DILL. NO. N/A 123 126 125 MILTON NO. 794 790 791 792 131-61548 AMFLO. NO. COUPLERS C27 SCHRADER NO. 598392 C28 506329 ADAPTER PLUGS CP27 700665 131-61550 131-61523 THREAD Male Female Male CP28 700664 Female NPT ASCOT NO. 1/4" 1/4" 1/4" 1/4" 131-61523 131-61524 131-62523 131-61539 131-61538 TYPE B 1/4” ARO SERIES • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Interchange with Aro 210 series as well as units produced by other manufacturers • Maximum working pressure 300 PSI TYPE D 131-08888 ASCOT NO. 131-61526 131-61527 131-08888 131-61529 131-61528 DILL. NO. 8888 N/A Push-toConnect 8889 8891 MILTON NO. 775 776 775 778 777 SCHRADER NO. COUPLERS 506599 C38 3525 C37 Dill 8888 Push-toConnect ADAPTER PLUGS 700757 CP38 700776 CP37 Female Male Female Female Male 1/4" 1/4" 1/4" 1/4" 1/4" 131-61528 AMFLO. NO. 131-61573 THREAD NPT ASCOT NO. 131-61573 131-61574 131-61578 131-61579 DILL. NO. 102 103 110 109 MILTON NO. 715 716 727 728 AMFLO. NO. COUPLERS C20 506089 C21 506249 ADAPTER PLUGS CP21 700677 CP20 700688 Female Male Male Female 1/4" 1/4" 1/4" 1/4" SCHRADER NO. THREAD NPT 131-61574 131-61579 1/4” INDUSTRIAL INTERCHANGE SERIES • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Interchange with Aro, Foster, Milton as well as units produced by other manufacturers • Maximum working pressure 300 PSI DILL. NO. D-13 D-12 MILTON NO. 785 786 AMFLO. NO. COUPLERS C2 C1 D-13R D-3C D-2C 784 783 ADAPTER PLUGS CP2 CP1 700691 700735 SCHRADER NO. 506079 506009 THREAD Female Male Female Female Male NPT 1/4" 1/4" 1/4" 1/4" 1/4" 131-61524 131-61539 131-62523 TYPE C 1/4” AUTOMOTIVE STANDARD (TRU-FLATE) • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Interchange with Tru-Flate 10 and 100 type series as well as units produced by other manufacturers • Maximum working pressure 300 PSI WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS

34 AIR SYSTEMS TYPE F 1/2” TRUE-FLATE SERIES • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heattreated to reduce wear on critical mating surfaces • Maximum working pressure 300 PSI 134-61543 134-61544 ASCOT NO. 134-61544 133-61563 ASCOT NO. 133-61563 133-61564 133-61471 133-61569 133-61568 133-61474 133-01855 DILL. NO. D-17 D-16 D-17R D-3F D-2F D-0F N/A MILTON NO. 1815 1816 — 1818 1817 1855 133-61471 AMFLO. NO. COUPLERS C10 C9 C10R ADAPTER PLUGS 1819 CP9-03 N/A CP10 700725 CP9 700626 3537 1855 Female 1/2" 1/2" 3/8" 1/4" Male Male Male QUICK RELEASE COUPLER • 1/4" female • Reduces the chance of an accidental air line disconnect • Double-click push button safety TYPE P 132-61476 3/8” AUTOMOTIVE SERIES • Brass plated couplers with hardened steel balls and stainless steel springs • Plugs heat-treated to reduce wear on critical mating surfaces • Maximum working pressure 300 PSI ASCOT NO. MFG. NO. 131-00020 DESCRIPTION NSPQ-SF-20 FEMALE RECAP PLUG • Case hardened steel, plated to resist rust • MAXIMUM INLET PRESSURE: 300 PSI • MAXIMUM TEMPERATURE: 250° F • AIR FLOW: 40 SCFM • Equivalent to Milton 731 ASCOT NO. MFG. NO. 131-61531 731 132-61478 132-61480 133-01855 HI-FLO/HVLP COUPLER ASCOT NO. 132-61476 132-61478 132-61553 132-61554 132-61481 132-61480 132-61559 132-61558 133-01855 DILL. NO. D-15C N/A D-15C N/A D-1E D-3E D-2E MILTON NO. 1803 1804 1805 1806 1810 D-0E 1809 1808 1807 1855 AMFLO. NO. COUPLERS C8 C7 C6 C5 SCHRADER NO. 502191 502181 502141 502105 ADAPTER PLUGS CP8 700835 CP7 700750 CP6 700647 700752 CP5 Female Male Female Male Male 1/4" 1/4" 3/8" 3/8" 1/4" ASCOT NO. MILTON NO. AMFLO NO. DESCRIP 135-00900 135-00910 764 765 135-00980 N/A 135-00901 135-00911 761-1 760-1 C90 C91 C98 CP90 CP91 1/4" FNPT Hi-Flo/HVLP Coupler-Brass 1/4" MNPT Hi-Flo/HVLP Coupler-Brass 1/4" FNPT Hi-Flo Coupler-Steel 1/4" FNPT Hi-Flo Plug-Steel 1/4" MNPT Hi-Flo Plug-Steel THREAD Male Female Female Male NPT 1/4" 1/4" 3/8" 3/8" • Designed for air tools and paint spray equipment • Provides up to 50% more air flow than conventional couplers • Hi-Flo couplers/plugs for use with sanders, grinders and high air usage tools • HVLP couplers for use with paint spray guns 135-00901 DESCRIPTION M-Style Female Recap Plug: .305-32 Quick Release Coupler SCHRADER NO. 503140 503104 — 133-61569 THREAD NPT Female 1/2" 1/2" Male Female 1/2" 134-61545 134-61487 134-61552 134-61543 MILTON NO. 779 787 — 781 — AMFLO NO. CP12 C2RB C2R 61-552 CPI-302 134-61545 SCHRADER NO. 700624 — 598390 3510 510121 DESCRIPTION Female 1/4" NPT Steel Plug (.302-32 Std.) Female 1/4" NPT Brass Coupler With Sleeve Female 1/4" NPT Steel Coupler Female 1/4" NPT Plug (.482 - 26-3/4") Male 1/4" NPT Plug (.302-32 inner & outer thread) 1/4” RETREADER SERIES 135-00910 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS

AIR SYSTEMS 35 HYDRAULIC COUPLERS • High-flow hydraulic coupler, 10,000 PSI working pressure RUBBER DUST COVER FOR HYDRAULIC COUPLERS • Hydraulic coupler dust cap • Used to keep dirt and debris from your hydraulic coupler when not connected • Made of a durable rubber material • Equipped with a pre-slit ring to allow coupler to slide easily over the coun • Comes standard with 8' and 10' hydraulic hoses 135-10605 ASCOT NO. MFG. NO. 135-10605 135-10606 DESCRIPTION PVV-38-M PVV-38-F 3/8" Male Hose Half Coupler - For Hydraulic Rams 3/8" Female Ram Half Coupler - For Hydraulic Rams 135-10606 ASCOT NO. MFG. NO. 319-03732 03-RDC DESCRIPTION Rubber Dust Cover for Hydraulic Couplers 732 HYDRAULIC QUICK CONNECT COUPLER/PLUG • 10,000 PSI maximum operating pressure • Safety sleeve lock prevents accidental disconnection • Heavy duty back-up ring prevents o-ring extrusion • Heat treated and plated steel for greater wear and corrosion resistance • Self-sealing poppet valves provide excellent high and low pressure seating • Coupler equivalent to Parker TC-371, AME TC-371 & ESCO 10626 • Plug equivalent to Parker TC-372, AME TC-372 & ESCO 10625 PARKER E-Z TO CONNECT/ DISCONNECT COUPLING • E-Z-Mate is an exhaust type coupler designed to exhaust air pressure prior to disconnection • Valve sleeve acts as integral shut-off valve • Meets ISO 4414 requirements • Built-in sleeve-lok mechanically locks the valve sleeve 131-17000 135-12606 ASCOT NO. ASCOT NO. MFG. NO. 135-11606 135-12606 DESCRIPTION FD35-1001-0606 Hydraulic Quick Connect Coupler FD35-1002-0606 Hydraulic Quick Connect Plug COMBO COUPLER® • One coupler fits 1/4" Aro Style, 1/4" Automotive Standard and 1/4" Industrial Interchange plugs 135-61241 ASCOT NO. MFG. NO. 135-61240 135-61241 C60 C61 SCHRADER NO. — — MILTON NO. 745 746 DESCRIPTION 1/4" Series, 1/4" NPT Female 1/4" Series, 1/4" NPT Male 131-17000 131-18000 133-17030 1857 1858 1859 131-02514 131-02516 132-03716 132-03718 133-05018 133-05012 133-75112 133-75116 ASCOT NO. MFG NO. EZ-251-4FP EZ-251-6FP EZ-371-6FP EZ-371-8FP EZ-501-8FP EZ-501-12FP EZ-751-12FP EZ-751-16FP MFG NO. BODY SIZE FEMALE COUPLERS 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4" BODY SIZE NIPPLES 1/2" 1/2" 1/2" THREAD Male Female Male THREAD SIZE 1/4-18 3/4-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 NPT 1/2" 1/2" 3/8" WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS

36 AIR SYSTEMS RPG 10-GALLON PORTABLE AIR TANK • Perfect for emergency tire inflation • 125 PSI maximum pressure with manifold provides plenty of usable air for inflation tasks • 4' hose and ball foot air chuck makes it easier to get to hard to reach areas • Drain port included for regular draining to help eliminate rust and to help stop compressor generated water from flowing down the air line • Heavy duty steel gauge construction • Easyto-read steel pressure gauge • Rubber pads on feet • Powder coated finish SOLID BRASS FEMALE CROSSES • Excellent for running several air lines from a common supply hose ASCOT NO. MFG. NO. NPT THREAD 136-00344 136-00366 344X 366X 1/4" 3/8" BRASS IN-LINE SWIVELS • Simple design is excellent to stop hoses from kinking or for use in pneumatic equipment applications 107-69101 136-00344 ASCOT NO. MFG. NO. 107-69101 107-00125 DESCRIPTION 91001ASC NS125DM RPG 10-Gallon Portable Air Tank Gauge & Valve Set for RPG 10-Gal Air Tank ASCOT NO. MFG. NO. NPT THREAD 136-02344 136-02366 344R 366R 136-02366 1/4" Male/Female NPT 3/8" Male/Female NPT RPG HIGH PERFORMANCE BLOW GUN KIT • Produces more air flow than standard blow guns, fits any hose with ¼” NPT thread, variable flow trigger provides precise control SOLID BRASS FEMALE TEES • Maximum working pressure 120PSI • Kit includes high performance blow gun, ultimate flow tip, rubber tip, quiet flow nozzle, 6” extension, 3” needle and reducer ASCOT NO. MFG. NO. 128-00006 HPBGK-7 DESCRIPTION RPG 7-Piece High Performance Blow Gun Kit • Use to run two lines from a common feed ASCOT NO. MFG. NO. NPT THREAD 136-01344 136-01366 136-01366 655 655-1 1/4" 3/8" SOLID BRASS SWIVEL STANDARD BLOW GUN • Compact blo-gun with safety & rubber tip 136-34490 ASCOT NO. MFG. NO. 128-20000 148 DESCRIPTION Blo-Gun 128-20000 ASCOT NO. MFG. NO. NPT THREAD 136-34490 660 1/4" Male/Female Swivel • Simple design is excellent to stop hoses from kinking or for use in pneumatic equipment applications BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS

AIR SYSTEMS 37 Hose Adapters and Fittings UNISWIVELS • Features a full 360° swivel to keep hose from twisting when using air operated tools and while paint spraying REUSABLE HOSE REPAIR FITTINGS • Makes air tight connection without using hose clamps • Must closely match hose OD (outer diameter) and ID (inner diameter) accurately before ordering • Minimum order is box of ten STANDARD FEMALE HOSE BARB FITTING 136-02366 ASCOT NO. MFG. NO. NPT THREAD 136-03344 S657 ASCOT NO. MFG. NO. NPT THREAD 136-72404 605 1/4" NPTF x 1/4" NPTM 1/4" x 1/4" Female Hose Barb 136-72404 STANDARD MALE HOSE BARB FITTINGS MALE PIPE THREAD • Select fitting to match hose ID • Fittings must be secured to hose with either a hose clamp or crimped-on ferrule 137-00621 ASCOT NO. 137-00418 137-00439 137-00420 137-00621 136-00608 ASCOT NO. 136-00401 136-00604 136-00406 136-00606 136-00806 136-00408 136-00608 136-00808 136-71404 136-71504 136-71604 136-71606 136-71806 136-71808 MFG. NO. 600 604 602 603 806 408 604 604-1 07001-0404 07001-0504 07001-0604 07001-0606 07001-0806 07001-0808 136-71606 NPT THREAD 1/4" 3/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 1/4" 5/16" 3/8" 3/8" 1/2" 1/2" HOSE ID 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" FEMALE PIPE THREAD 137-01621 ASCOT NO. 137-01418 137-01439 137-01520 137-01621 137-01623 137-01624 MFG. NO. 418F 439F 520F 621F 623F 624F HOSE OD 1/2" 9/16" 5/8" 21/32" 23/32" 21/32" HOSE ID 1/4" 1/4" 5/16" 3/8" 3/8" 3/8" NPT 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" MFG. NO. 615-8 615 617 621 HOSE OD 1/2" 9/16" 5/8" 21/32" HOSE ID 1/4" 1/4" 1/4" 3/8" NPT 1/4" 1/4" 1/4" 1/4" WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS

38 AIR SYSTEMS HOSE SPLICERS BRASS FERRULES ASCOT NO. 136-71405 136-71406 136-71408 136-71440 137-11520 137-11621 137-11623 MFG. NO. 07014-05 07014-06 07014-08 07014-04 520S 621S 623S HOSE OD HOSE ID 5/16" 3/8" 1/2" 1/4" 5/8" 5/16" 3/8" 1/2" 1/4" 21/32" 23/32" 5/16" 3/8" 3/8" • For use with hose barb fittings • Use with hose crimper (Ascot No. 137-08550) • QUANTITY: 50 per box MALE PIPE COUPLINGS • Solid Brass NPT ASCOT NO. 137-00344 137-00346 137-00366 137-00388 MFG. NO. 646 643-1 643-3 647-2 PIPE COUPLING FEMALE NPT • Solid Brass STANDARD HOSE CRIMPER ASCOT NO. MFG. NO. 137-01344 643 MALE NPT 1/4" x 1/4" • Provides production capability and “big tool” crimping advantages at a much lower cost • Heavy duty ductile iron casting and hardened steel dies for long service life and positive crimping • With five dies for crimping 1/4" single braid to 3/8" double braided hose BUSHINGS AND ADAPTERS • Solid Brass MALE NPT 1/4" 3/8" 3/8" 1/2" MALE NPT 1/4" 1/4" 3/8" 1/2" ASCOT NO. MFG. NO. FERRULE I.D. 137-73215 137-73225 137-73235 137-73255 137-73265 137-73275 137-73285 137-73295 137-73305 137-73315 137-73325 137-73335 137-73345 137-73355 137-39525 137-50291 137-72421 7321-50 7322-50 7323-50 7325-50 7326-50 7327-50 7328-50 7329-50 7330-50 7331-50 7332-50 7333-50 7334-50 7335-50 3952-50 5029A-50 7242A-50 .478" .500" .527" .562" .593" .625" .656" .687" .718" .750" .781" .812" .825" .850" .875" .900" .937" ASCOT NO. 136-61264 137-01324 137-01346 137-01348 137-01368 137-01389 MFG. NO. 06120-0604 650 651 651-1 652 652-8 MALE NPT 1/4" 1/4" 3/8" 1/2" 1/2" 3/4" FEMALE NPT 3/8" 1/8" 1/4" 1/4" 3/8" 1/2" ASCOT NO. MFG. NO. 137-08550 1626 DESCRIPTION Standard Hose Crimper BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR SYSTEMS

AIR SYSTEMS 39 Clamps OETIKER 2-EAR CLAMPS • Especially suited for industrial or heavy vibrating equipment • Medium pressure clamp that is used for maintenance and OEM applications ASCOT NO. MFG. NO. 316-00507 316-00709 316-00911 316-01113 316-01315 316-01517 316-01518 316-01720 316-01922 316-02023 316-02225 316-02327 316-03740 507 709 911 1113 1315 1518 1720 NOMINAL SIZE 1/4" 5/16" 7/16" 1/2" 9/16" 1517 19/32" 5/8" 3/4" 1922 13/16" 7/8" 15/16" 1" 1-1/2" 2023 2225 2327 3740 INCHES CLOSED-OPEN .197-276" .276-.354" .355-.433" .433-.512" .512-.591" — .591-.708" .669-.787" .748-.866" .787-.905" .866-.984" .905-1.063" — MM CLOSED-OPEN 5-7 mm 7-9 mm 9-11 mm 11-13 mm 13-15 mm — 15-18 mm INNER INCHES .236" .276" .276" .276" .295" .315’ WIDTH OF EAR 6.0 mm 7.0 mm 7.0 mm 7.0 mm 7.5 mm — — 8.0 mm 17-20 mm .335" 8.5 mm 19-22 mm .354" 20-23 mm .354 22-25 mm .394" 23-27 mm .394" — 9.0 mm 9.0 mm 10.0 mm 10.0 mm — — PINCH CLAMPS 1 Position clamp on hose as illustrated. p 2 • Made from stainless steel • Feature a specialized tonguein-groove design to provide a tight, secure seal • Tamper evident design • Ideal for both flexible and inflexible thin-walled hoses • Smooth-edged bandsteel design prevents damage to hoses Pinch Clamp OETIKER 2-EAR CLAMP SERVICE KIT • SERVICE KIT CONTAINS THE FOLLOWING SIZES: (15) 5/16"; (15) 7/16"; (15) 1/2"; (15) 9/16"; (12) 5/8"; (12) 3/4"; (12) 7/8"; (12) 15/16"; (12) 1"; and (1) pair straight jaw pincers ASCOT NO. 316-91098 316-01098 DESCRIPTION Complete Kit Pincer Only 316-91098 Give each ear a firm squeeze with your OETIKER pincers. 316-00102 3 Where access to ear is difficult, use OETIKER’s side jaw pincers. ASCOT NO. MFG. NO. 316-00012 316-00058 316-00078 316-00716 316-00916 316-02332 316-00102 PEC12 PEC58 PEC78 PEC716 PEC916 PEC2332 CSC-102 DESCRIPTION 1/2" Pinch Clamp 5/8" Pinch Clamp 7/8" Pinch Clamp 7/16" Pinch Clamp 9/16" Pinch Clamp 23/32" Pinch Clamp Handheld Pinch Clamp Crimper WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR SYSTEMS

VEHICLE REPAIR SOLUTIONS 231HA-2 2145QiMAX 285B-6 2235TIMAX-2 THE POWER YOU NEED. THE QUALITY YOU DESERVE. www.ingersollrand.com | ©2020 Ingersoll Rand

AIR TOOLS 41 Impact Wrenches (CP) Sanders & Blue Tork (CP) Air Ratchets (CP) Buffers & Grinders (CP) Air Drills (CP) Air Tools & Accessories (RPG) Impact Wrenches (IR) Cordless Tools (IR) Cordless Tools (Milwaukee) Hammers, Grinders & Drills (IR) Air Tool Lubricants & Conditioners Accessories & Work Stations WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE

42 AIR TOOLS Impact Wrenches 3/8" HEAVY DUTY AIR IMPACT WRENCH • One hand push button forward/reverse power regulator • Handle exhaust directs air away from the work area • 360˚ air inlet swivel pr hose kinks • APPLICATIONS: general repair transmission work, exhaust systems and body shops • ULTIMATE TORQUE: 200 ft./lb 152-00724 ASCOT NO. MFG. NO. 152-00724 CP724H DESCRIPTION 3/8" Heavy Dut Impact Wrench 1/2" SUPER DUTY AIR IMPACT WRENCH 3/8" SUPER DUTY ANGLE IMPACT WRENCH • High Durability • Compact • Powerful • Comfort • Great Control • Easy operation • Single handed forward/ reverse operation • 3 positions in forward and 1 in reverse • 185 ft./lb. (250 Nm) of maximum torque in reverse DURABLE & HEAVY DUTY ASCOT NO. MFG. NO. 152-07727 CP7727 • Tackle the tough jobs with the po of this true workhorse • Patented clut provides smooth operation and extreme durability • One hand push button forward reverse power regulator • 4 positive power se forward and ultimate power in rev comfortable contoured handle • UL COMPACT & POWERFUL 152-07727 1/2" HEAVY DUTY AIR IMPACT WRENCH DESCRIPTION 3/8" Super Duty Angle Impact Wrench 1/2" SUPER DUTY ANGLE IMPACT WRENCH • High durability • Compact • Powerful • Comfort • Great control • Easy operation • Single handed forward/reverse operation • 3 positions in forward and 1 in reverse • 220 ft./lb. (300 Nm) of maximum torque in reverse ASCOT NO. MFG. NO. 153-07737 CP7737 DESCRIPTION 1/2" Super Duty Angle Impact Wrench ASCOT NO. MFG. NO. 153-00734 153-01734 CP734H CP734HK DESCRIPTION 1/2" Impact Wrench KIT INCLUDES: CP734H, (1) Set of 5 SAE Sockets: 1/2", 5/8", 3/4", 7/8", 15/16" 153-01734 • One hand push button forward/reverse power regulator • 4 positive power setting • Ultimate power in reverse • Differential regulator allows the operator to match the required power to the job • Patented oil bath Dyna-Pact clutch delivers smooth operation and extended durability • Handle exhaust with 360º air inlet swivel to prevent kinks • Power and economy for general repair, transmission work, exhaust systems and body shops • ULTIMATE TORQUE: 425 ft./lb. ASCOT NO. 153-07492 153-17492 MFG. NO. CP749 CP749-2 DESCRIPTION 1/2" Impact Wrench 2" Extended Anvil 3/8" HEAVY DUTY AIR IMPACT WRENCH • The most powerful 3/8" of its class for general maintenance • Maximiz operator comfort with an extremely ligh balanced design • Most convenient and unique r technology in the market • ULTIMATE TOR ASCOT NO. MFG. NO. 152-07729 CP7729 DESCRIPTION 3/8" Heavy Duty Air Impact Wrench 153-00734 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS

AIR TOOLS 43 1/2" SUPER DUTY AIR IMPACT WRENCH-TIRE TOOL • Patented spring hammer clutch for smooth operation and extended durability • Low air consumption and high torque make this tool very efficient • ULTIMATE TORQUE: 665 ft./ lb. • Comfort and control with new ergonomic grip and trigger • SUITED FOR ALL MAINTENANCE APPLICATIONS: Light vehicle tire changing operations, light vehicle mechanical repair, MRO applications 1/2" SUPER DUTY AIR IMPACT WRENCH-TIRE TOOL • 960 ft./lb. of torque (1,300 Nm) • Har anodized end plates • Har cylinder • Twin hammer mechanism • Lightweight due to the C motor housing • COMPACT Only 6.6" long • Curved handle with rubber material resistant to mos workshops • Full teasing trigger • 360° s air inlet • Friction ring sock ASCOT NO. MFG. NO. 153-00736 153-07336 CP7736 CP7736-2 DESCRIPTION 1/2" Super Duty Air Impact Wrench - Tire Tool 2" Extended Anvil 153-077748 1/2" DRIVE STUBBY IMPACT WRENCH • BEST POWER TO WEIGHT RATIO: 450 ft./ lb. (610 Nm) • Ultra compact and easy to use • Durable with a steel front cover and aluminum body • One hand operation forward - reverse by either left or right-handed users • 3 setting positions • Jumbo hammer The 1/2" Super Duty Air Impact WrenchTire Tool in use. ASCOT NO. MFG. NO. 153-07748 153-77482 CP7748 CP7748-2 DESCRIPTION 1/2" Super Duty Air Impact Wrench-Tire Tool 2" Extended Anvil 153-07732 1/2" HEAVY DUTY AIR IMPACT WRENCH • Side-To-Side (S2S) forward/ functionality • Perfectly balanc reduce strain on wrist and forearm • Twin hammer mechanism • ULTIMATE TORQUE: 955 ft./lb BEST POWER TO WEIGHT RATIO The 1/2" Drive Stubby Impact Wrench in use. ASCOT NO. MFG. NO. 153-07732 CP7732 DESCRIPTION 1/2" Drive Stubby Impact Wrench ASCOT NO. MFG. NO. 153-07749 153-77492 CP7749 CP7749-2 DESCRIPTION 1/2" Impact Wrench 2" Extended Anvil 153-77492 PERFECT BALANCE FEATURES S2S (SIDETO-SIDE) WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS

44 AIR TOOLS Impact Wrenches (cont.) 3/4" HEAVY DUTY AIR IMPACT WRENCH • Smoothest operating 3/4" impact on the market • One hand push button forward/reverse power regulator • Handle exhaust with 360˚ air inlet swivel • APPLICATIONS: spring work, truck and bus maintenance, farm machines & construction equipment • ULTIMATE TORQUE: 1,000 ft./lb. 1" HEAVY DUTY AIR IMPACT WRENCH • Chicago Pneumatic's strongest and most powerful 1" Impact Wrench • Operator productivity • Convenient reverse valve • Ideal for high volume tire work on trucks, buses, and heavy equipment • 1" impact wrench with 7" extended anvil • Rocking dog clutch • 4-position power settings throttle for ease of use ASC 154-00772 154-01772 CP772H CP772H-6 ASCOT NO. MFG. NO. 155-50000 CP5000 3/4" Impact Wrench 6" Extended Anvil 1" SUPER DUTY AIR IMPACT WRENCH 3/4" HEAVY DUTY AIR IMPACT WRENCH • Reduced Length at only 7.9" • All controls within reach • Variable speed trigger • One-hand power adjustment • One-hand reverse system • 1440 ft./lb. (1950 Nm) of maximum torque • Composite motor housing • Twin hammer mechanism • 360° swivel air inlet • Socket r with hole r • 14.5 lb. (6.6 kg) • Twin hammer mechanism • Steel motor • Intuitive forward/ reverse lever & power regulator on both sides • 4-position power settings on both sides • Side handle with soft touch grip • Down exhaust • Aluminum housing • Composite cover on the clutch housing • Socket retainer ring • 1300 ft./lb. (1760 Nm) maximum torque in reverse 7" Extended Anvil DESCRIPTION ASCOT NO 154-07769 154-77696 CP7769-6 6" Extended Anvil ASCOT NO. MFG. NO. 155-07773 155-77736 CP7773D CP7773D-6 DESCRIPTION 1" Short Shank 6" Extended Anvil 3/4" SUPER DUTY AIR IMPACT WRENCH - "D" HANDLE • LIGHTWEIGHT: 3/4" at only 14.3 lb. • 1300 ft./lb. (1760 Nm maximum torque in reverse) • Twin hammer mechanism • Steel motor • Intuitive Forward/Reverse lever & power regulator on both sides • 4-position power settings on both sides • Side handle with soft-touch grip • Down exhaust • Aluminum housing • Composite cover on the clutch housing • Sockt rtainer ring 1" HEAVY DUTY AIR IMPACT WRENCH • High performance clutch provides longer life under tough conditions • High-efficiency 6 vane motor for maximum performance • Bottom exhaust directs exhaust away from the operator • Three-position power regulator with directional control • ULTIMATE TORQUE: 1,620 ft./lb. ASCOT NO. MFG. NO. 154-27763 154-37763 CP7763D CP7763D-6 DESCRIPTION 1" Short Shank 6" Extended Anvil 155-07778 155-77786 155-27786 CP7778 CP7778-6 CP7778SP-6 1" Short Shank 6" Extended Anvil #5 Spline with 6" Extended Anvil BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS

AIR TOOLS 45 FULL TEASING TRIGGER 1" Heavy Duty Air Impact Wrench • 2140 ft./lb • Pinless closed r • Socket retainer ring combined with hole retainer • Ergonomic side handle • Full teasing trigger • Regulator with integrated forward/reverse with 3-position power settings in both directions ASCOT NO. MFG. NO. 155-07782 155-77826 155-17782 CP7782 CP7782-6 CP7782-SP6 DESCRIPTION 1" Short Anvil 6" Extended Anvil #5 Spline with 6" Extended Anvil 1" HEAVY DUTY AIR IMPACT WRENCH 1" HEAVY DUTY AIR IMPACT WRENCH • High Operator Comfort-Ergonomic D-Handle with full teasing trigger • HIGH DURABILITY: Pinless closed reinforced rocking dog mechanism in oil bath • SHOCK ABSORBING: Rubber bumper protecting both applications and tool (included) • POWERFUL AND LIGHT: 1770 ft./lb. (2400 Nm) in reverse D-HANDLE FOR COMFORT RUBBER BUMPER • LIGHTWEIGHT: Only 6.9 lb. (3.15 kg) thanks to a composite motor housing for an improved operator comfort • Socket retainer ring combined with hole retainer • T mechanism • ALL CONTROLS WITHIN REA speed trigger, One-hand power adjus system • 360° swivel air inlet • 1440 ft./lb ASCOT NO. MFG. NO. 155-07779 155-17779 CP7779 CP7779-6 155-07783 1" SUPER DUTY AIR IMPACT WRENCH • Rocking dog clut for smooth operation and extreme durability • Teasing throttle for easy bolt starting • Convenient reverse valve for easy directional changes • Choice of professional mechanics for high volume tire work on trucks, buses and heavy equipment • ULTIMATE TORQUE: 1,400 ft./lb. ASCOT NO. MFG. NO. 155-07783 155-77836 CP7783 CP7783-6 DESCRIPTION 1" Short Shank 6" Extended Anvil ASCOT NO. MFG. NO. 155-07971 155-07976 156-79716 CP797 CP797-6 CP797SP-6 DESCRIPTION 1" Short Shank 6" Extended Shank 6" Extended Shank and #5 Spline 155-07976 DESCRIPTION 1" Impact Wrench 6" Extended Anvil WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS

46 AIR TOOLS Sanders & Blue Tork HEAVY DUTY HIGHSPEED SANDER • Built-in regulator and variable speed throttle for precise speed control • Rugged, energy efficien 1/2 HP motor • APPLICATIONS: Ideal for small jobs or hard to reach spots including paint removal, shaping filler patches, smoothing and rust removal • FREE SPEED: 14,000 RPM ASCOT NO. MFG. NO. 158-00778 CP9778 DESCRIPTION Heavy Duty High-Speed Sander MINI DISC SANDER KIT • KIT INCLUDES: CP7202 Mini Disc Sander plus (1) 3" backing pad, (10) 3" 80, 100 & 120 grit sanding discs, (1) 3" fine, medium and coarse surface prep disc & a spindle wrench packed in a heavy duty carrying case • FREE SPEED: 15,000 RPM 158-07202 ASCOT NO. MFG. NO. 158-07202 DESCRIPTION CP7202D Mini Disc Sander Kit TWO PNEUMATIC MOTORS LOW NOISE 1 " Non-Impact Wrench (Blue Tork) • EFFICIENCY: Precise and accurate tightening, less fatigued operators • Two pneumatic motors for rundown and final tightening • Preset and adjustable shut off for torque control • QUALITY: Precise, accurate tightening to the manufacturer’s recommended torque and angle specifications • ENVIRONMENT IMPROVEMENTS: by increasing durability of the tools, we reduce waste • ERGONOMICS: very low noise level, virtually no vibration BUYER'S GUIDE ASCOT SUPPLY CORPORATION • MAXIMUM TORQUE: 660 ft./lb. ASCOT NO. MFG. NO. 168-07600 168-07602 168-07603 DESCRIPTION CP7600xB CP7600xB-R CP7600xB-R4P Non-Reversible Single Torque Preset Reversible Single Torque Preset Reversible 4 Torque Preset Selector WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS

AIR TOOLS 47 Air Ratchets QUICK REFERENCE CHART CP No. CP826 CP828 CP7829 CP7830Q Ascot No. 151-00826 151-00828 152-07829 152-07830 Sq. Drive (mm) 1/4" (6) Std Bolt Size (mm) 1/4" (6) 3/8" (10) 3/8" (10) 3/8" (10) 3/8" (10) 3/8" (10) 3/8" (10) Net Wt. (kg) 1.13 (0.51) 2-5/8 (1.2) 1.235 (2.72) 2.7 (1.2) Avg Air Cons. (CFM) 3.5 4 4 5 (142) Air Inlet (in.) 1/4" 1/4" 1/4" 1/4" Min. Hose Size (in.) 3/8" (10) 3/8" (10) 3/8" (10) 3/8" (10) Working Torque (ft./lbs.) 5-15 (7-20) 10-50 (14-68) 10-55 (15-68) 10-90 (14-136) Max Torque (ft./lbs.) 15 (20) 50 (68) 150 RPM 95 (70) 90 (122) 1/4" SUPER DUTY AIR RATCHET • Exceptional durability with an advanced head design that virtually eliminates slippage • Urethane grip for comfort and control • Faster rundown with 250 RPM • APPLICATIONS: Under-dashboard work, small engine repair and body shops • ULTIMATE TORQUE: 15 ft./lb. 3/8" EXTREME DUTY AIR RATCHET • Adjustable side exhaust • LOW NOISE LEVEL: Only 79 dBA • One of the highest torques available on the market • CP’s Patented TriSpring anti-slip head design ASCOT NO. MFG. NO. 151-00826 CP826 DESCRIPTION 1/4" Super Duty Air Ratchet 3/8" HEAVY DUTY AIR RATCHET • Advanced motor, full caged gear, and head design • Only 10.7in / 272mm long • Better access to restricted areas • 2.7 lb. / 1.2 kg • Adjustable side exhaust avoids blowing dirt and dust • Ergonomic composite grip insulates operator’s hand from cold • Designed for a variety of applications from heavy ones such as transmission and suspension work to light ones such as engine repair, dashboard work and general maintenance • ULTIMATE TORQUE: 70 ft./lb. 3/8" QUIET AIR RATCHET • APPLICATIONS: exhaust systems, small engines, water and fuel pumps and radiator and air conditioner removal and replacement • New advanced, patented head design • Patented ergonomic square-handle design for a comfortable grip • Efficient 1/2 HP motor and triple idler planetary gear system • ULTIMATE TORQUE: 50 ft./lb. RUBBER BUMPER ASCOT NO. MFG. NO. 152-00828 153-08281 CP828 CP828H DESCRIPTION 3/8" Quiet Air Ratche 1/2" Quiet Air Ratchet 152-00828 ASCOT NO. MFG. NO. 152-07830 153-07830 DESCRIPTION CP7830Q CP7830HQ 3/8" Super Duty Ratchet 1/2" Super Duty Ratchet ASCOT NO. MFG. NO. 152-07829 153-07829 CP7829 CP7829H DESCRIPTION 3/8" Heavy Duty Air Ratchet 1/2" Heavy Duty Air Ratchet The 3/8" Air Ratchet in use. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS

48 AIR TOOLS Needle Scaler, Cutter, Tire Buffers NEEDLE SCALER • Ideal for surface preparation work • Adjustable sleeve allows needle clearance based on the application • 19 1/8" steel needles with high resistance to wear • Easily converts to a weld flux chipping hammer • BLOWS PER MINUTE: 4,800 ASCOT NO. MFG. NO. 157-07120 CP7120 DESCRIPTION Needle Scaler LOW SPEED TIRE BUFFER KIT • Quick change slip chuck for fast and eas change of buffing wheel • Adjustable speed regulator for precise control • Lock off throttle to prevent accidental start ups • Rear exhaust directs air away from work area • 2,800 RPM 158-00873 ASCOT NO. 158-00873 158-01873 HIGH SPEED CUTTER • Adjustable speed regulator for precise control • Lock off throttle to prevent accidental start up • Rear exhaust directs air away from work area • MAX RPM: 22,000 ASCOT NO. MFG. NO. DESCRIPTION 157-00874 173-00101 173-00220 CP874 CW1 CW20 HIGH SPEED TIRE BUFFER KIT • Jacobs chuck for holding buffing acc • Lock-off throttle • APPLICATIONS: tire patchwork, roughing areas for recapping and cleaning tire moldings • FREE SPEED: 22,000 RPM High Speed Cutter Cut-Off Wheel Arbor for High Speed Cutter (Fits 3" & 4" Cut-Off Wheels) ASCOT NO. MFG. NO. 158-00871 158-01871 CP871K CP871 DESCRIPTION Includes Over Hose High Speed Tire Buffer Only MFG. NO. CP873K CP873 DESCRIP Includes Over Hose Low Speed Tire Buffer Only Grinders & Surface Conditioning Discs 417-39120 2" QUICK CHANGE SURFACE CONDITIONING DISCS • Embedded with abrasive grain to eliminate fraying of edges, resist loading and provide a consistent finish • Ideal for flat or contoured surfaces • APPLICATIONS: Light deburring, surface preparation, blending scratches, removing rust, corrosion and oxidation, removing stains from stainless steel, finishing aluminum and stainless steel • Available in fine, medium or coarse ASCOT NO. MFG. NO. 417-39120 417-39121 417-39122 417-39202 DESCRIPTION 3912BLUEF 2" Quick Change Surface Conditioning Discs: Blue (Fine) 3912MARNM 2" Quick Change Surface Conditioning Discs: Maroon (Medium) 3912BRWNC 2" Quick Change Surface Conditioning Discs: Brown (Coarse) 392002 Backing Pad for 2" Surface Conditioning Discs 9202 417-39121 FINE, MEDIUM OR COARSE 417-39122 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS

AIR TOOLS 49 Grinders & Surface Conditioning Discs (cont.) GREEN ZIRCONIA DISCS • Twist-to-lock backing • Offers longer life and more aggressive results than zirconia or aluminum oxide • Flexible discs resist chipping, snagging and cracking • For use on air grinders and are compatible with all 3M style, Type “R” backing pads • Especially good on extra hard metals • 20,000 RPM • 25 per box ASCOT NO. MFG. NO. DESCRIPTION 417-12612 417-12613 417-12614 417-12615 417-12616 417-12617 417-12618 417-12619 12612 12613 12614 12615 12616 12617 12618 12619 2" SURFACE CONDITIONING DISCS • Best used on aluminum parts • USA MADE • QUANTITY: 25 per box • MAXIMUM OPERATING SPEED: 25,000 ASCOT NO. MFG. NO. 417-13003 417-13004 417-13005 620TE-1 622TE-1 2" Disc, 24 Grit (25 per box) 2" Disc, 36 Grit (25 per box) 2" Disc, 50 Grit (25 per box) 2" Disc, 80 Grit (25 per box) 3" Disc, 24 Grit (25 per box) 3" Disc, 36 Grit (25 per box) 3" Disc, 50 Grit (25 per box) 3" Disc, 80 Grit (25 per box) STRIP-BRITE PADS 417-16210 • Used for paint or coating removal • Features the quick and easy twist-to-lock attachment system • Open-web construction impregnated with silicon carbide to provide aggressive and long-lasting performance • Threedimensional web has a soft edge, allowing it to remove paint and other coatings in those unreachable creases and dents while removing very little metal • Ideal for stripping paint without damaging metal, especially on aluminum • QUANTITY: 10 per Box ASCOT NO. MFG. NO. DESCRIPTION 417-16210 417-16211 16210 16211 Purple 2" Strip-Brite Pad Purple 3" Strip-Brite Pad PROFESSIONAL STUD/HUB BRUSH KIT • Ideal for hub and stud cleaning job with ease • QUICK AND EASY: Change brushes in seconds • Includes a 1/2" drive adapter • Powered by a cordless drill • Replacement brushes available MADE IN THE USA 417-13004 DESCRIPTION 2" Conditioning Discs: Brown (Coarse) 2" Conditioning Discs: Maroon (Medium) 620TE-1-50 2" Conditioning Discs: Brown (Coarse) MINI ANGLE DIE GRINDER • Compact, lightweight design for easy maneuver • 90˚ angle head allows flexibility in confined areas • Complete with 1/4" and 6mm collet • APPLICATIONS: high speed blending, smoothing, porting, and deburring in confined areas • MAX RPM: 22,500 ASCOT NO. MFG. NO. 157-00875 CP875 MINI DIE GRINDER • Compact, lightweight design for easy maneuverability • Adjustable speed regula for precise control • Complete with 1/4" and 6mm collet • APPLICATIONS: high speed blending, smoothing, porting, and deburring in confined areas • MAX RPM: 30,000 ASCOT NO. MFG. NO. 157-00876 CP876 DESCRIPTION Mini Die Grinder DESCRIPTION Mini Angle Die Grinder 402-32613 ASCOT NO. MFG. NO. 402-32610 DESCRIPTION 203610-ASC Stud/Hub Brush Kit ASCOT NO. MFG. NO. 402-32611 402-32613 402-32614 402-32615 402-32616 203611-ASC 203613-ASC 203614-ASC 203615-ASC 203616-ASC DESCRIPTION REPLACEMENT COMPONENTS FOR STUD/HUB BRUSH KIT Plastic Hub/Stud Tool & Adapter 4-Pack of Replacement 14mm Stud Brushes 4-Pack of Replacement 22mm Stud Brushes 4-Pack of Replacement Passenger Hub Brushes 4-Pack of Replacement Truck Hub Brushes 417-13003, 417-13005 QTY./BOX 25 25 50 402-32610 402-32615 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS

50 AIR TOOLS Drills 3/8" REVERSIBLE DRILL • Teasing throttle for precise control • APPLICATIONS: Screwdriving, honing and heavy drilling • FREE SPEED: 2,600 RPM 1/4" REVERSIBLE MINI AIR DRILL • Composite housing with thermoplastic rubber handle grip • Wings on right & left sides to guide the forefinger • Large teasing trigger and progressive valve allowing mor control to start holes • Low speed gear bo • Flat back part for better pushing action while drilling and tapping • Reverse lever on the t for easier access • Handle exhaust allowing the air to flow away from the operator • Supplied with high quality industrial Jacobs® chuck for longer use • keyed Metal • APPLICATIONS: Excellent for drilling, honing, reaming and hole sawing • FREE SPEED: 3,300 RPM ASCOT NO. MFG. NO. 157-07302 DESCRIPTION CP7300RC 1/4" Reversible Mini Air Drill 157-07302 ASCOT NO. MFG. NO. 157-78926 DESCRIPTION CP789-R26 3/8" Reversible Drill 157-78926 3/8" REVERSIBLE ANGLE DRILL • Composite housing with thermoplastic rubber handle grip • Lock-off throttle for more controlled applications • Built-in Forward– Reverse ring • Compact low profile head to get into confined spaces • Handle exhaust allowing the air to flow away from the operator• Supplied with high quality industrial Jacobs® chucks for longer use • APPLICATIONS: Excellent for drilling and screw driving in confined areas • FREE SPEED: 2,000 RPM BUILT-IN FORWARDREVERSE 157-01879 1/4" MINI AIR DRILL • Composite housing with thermoplastic rubber handle grip • Wings on right & left sides t guide the forefinger • Large teasing trigger and progressive valve allowing more con to start holes • Low speed gear box • Fla part for better pushing action while drilling and tapping • Handle exhaust allowing the air to flow away from the operator • Supplied with high quality industrial Jacobs® chuck for longer use • keyed Metal • APPLICA Excellent for drilling, honing, reaming and hole sawing • FREE SPEED: 3,300 RPM 157-17302 ASCOT NO. MFG. NO. 157-17302 DESCRIPTION CP7300C 1/4" Mini Air Drill ASCOT NO. MFG. NO. 157-00789 DESCRIPTION CP789-HR 1/2" Reversible Drill 157-00789 ASCOT NO. MFG. NO. 157-01879 CP879C DESCRIPTION 3/8" Reversible Drill 1/2" REVERSIBLE DRILL • Teasing throttle for precise contr • APPLICATIONS: heavy drilling, r hole sawing and jobs requiring a lo of torque • FREE SPEED: 500 RPM BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS

AIR TOOLS 51 Air Tool Accessories HAMMER ACCESSORIES 1 2 3 4 5 6 7 8 9 10 11 12 INDEX NO. 1 2 3 4 5 6 7 8 9 10 11 12 ASCOT NO. 171-47050 171-47051 171-47052 171-47057 171-47059 171-47061 171-47071 171-47073 171-47074 171-47078 171-47091 171-47095 171-47096 171-47270 171-47300 171-47032 MFG. NO. A-047050 A-047051 A-047052 A-047057 A-047059 A-047061 A-047071 A-047073 A-047074 A-047078 A-047091 A-047095 A-047096 CA-047270 CA-047300 CA-047302 DESCRIPTION Rivet Cutter Wide Cutting Chisel Bushing Splitter U-Joint & Tie Rod Tool 1" Separator Fork 1-1/4" Separator Fork Twin Blade Cutter Cold Chisel Straight Punch Tapered Punch 1-1/4" Smoothing Hammer Quick-Change Retainer Bee-Hive Retainer 2' Leader Hose Quick Change Coupler Nipple WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS

52 AIR TOOLS 155-17786 156-17786 RPG 1" DRIVE & #5 SPLINE SUPER DUTY AIR IMPACT WRENCH • 6" extended anvil • Steel end plates • WORKING TORQUE RANGE: 1,600-1,800 ft./lb. • FREE SPEED: 4,500 RPM • MAXIMUM TORQUE: 1,800 ft./lb. 155-26464 RPG 1" DRIVE MINI PLUS AIR IMPACT WRENCH • 6" extended anvil • 3-position power setting • Rubber-coated side handle for added comfort • Powered by the twin hammer clutch • FREE SPEED: 5,000 RPM • MAXIMUM TORQUE: 2,000 ft./lb. RPG 1" & #5 SPLINE DRIVE SUPER DUTY IMPACT WRENCH • 6" extended anvil • 3-position forward and reverse • High efficiency 6-vane motor • Swoop-back side handle for maneuverability and balance • Pinless clutch mechanism • WORKING TORQUE RANGE: 1,800-2,000 ft./lb. • FREE SPEED: 5,000 RPM • MAXIMUM TORQUE: 2,000 ft./lb. IMPACT WRENCH SPECIFICATIONS ASCOT NO. 155-12856 155-17786 155-26464 156-12856 156-17786 MFG. NO. A2856 A778-6 A26464 A2856SP A778SP-6 SQUARE DRIVE 1" 1" 1" #5 Spline #5 Spline FREE SPEED (RPM) 5,000 4,500 5,000 5,000 4,500 MAX TORQUE (FT./LB.) 2,000 1,800 1,800 2,000 1,800 AIR PRESSURE (PSI) — 90 90 — 90 AIR CON. AVG (CFM) 12 8.4 9 12 8.4 AIR INLET (NPT) 1/2" 1/2" 1/2" 1/2" 1/2" HOSE SIZE 3/4" 3/4" 3/4" 3/4" 3/4" LENGTH 20.5" 20.3" 19.2" 20.5" 20.3" WEIGHT (LB.) 27.6 26.59 17.86 27.6 26.59 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS

AIR TOOLS 53 RPG 1/2” DRIVE SUPER DUTY AIR IMPACT WRENCH • 2" extended anvil • FREE SPEED: 8000 RPM • MAXIMUM TORQUE: 600 ft./lb. • Proven design and the most popular configuration in the tire service industry • Powered by the durable and high performing twin hammer mechanism • Handle exhaust RPG 1/2" DRIVE COMPOSITE IMPACT WRENCH W/ EXTENDED ANVIL • Convenient one-hand operated forward/reverse push button • Four-setting torque adjustment switch • Compact with a total length of only 7.2" • Twin hammer mechanism provides smooth balance • Feather trigger for precise speed control • Energy efficient motor for maximum performance & long life • Swivel air inlet prevents hose from twisting 153-23120 153-12260 153-23121 ONE-HAND PUSH BUTTON IMPACT WRENCH SPECIFICATIONS ASCOT NO. 153-12260 153-23120 153-23121 MFG. NO. A2131-2COMP A2312 SS-A2312 SQUARE DRIVE 1/2" 1/2" 1/2" FREE SPEED (RPM) 7,500 8,000 8,000 MAX TORQUE (FT./LB.) 685 600 600 AIR PRESSURE (PSI) 90 90 90 AIR CON. AVG (CFM) 5 4 4 AIR INLET (NPT) 1/4" 1/4" 1/4" HOSE SIZE 3/8" 3/8" 3/8" LENGTH 7.2" 8-1/8" 6.1" WEIGHT (LB.) 4.5 5.6 5.9 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS

54 AIR TOOLS RPG Parts & Accessories ASCOT NO. MFG. NO. 175-10026 #26 175-10026 175-10037 175-10037 #37 175-10040 #40 175-10043 #43 DESCRIPTION REPLACEMENT PARTS FOR A778-6 1" DRIVE IMPACT WRENCH Set of 6 Rotor Blades for A7786 1" Drive Impact Wrench Hammer for A778-6 1" Drive Impact Wrench Hammer Cage for A778-6 1" Drive Impact Wrench Replacement Side Handle Kit for A7786 1" Drive Impact Wrench 176-18406 A778-6TK Tune-Up Kit for A778-6 1" Drive Impact Wrench 175-10043 175-10040 175-23104 ASCOT NO. MFG. NO. JB-04Blue H-082651 P-08371 175-23104 175-82651 175-83071 DESCRIPTION Blue Protective Boot for RPG A2312 Impact Wrenches 1" Impact Wrench Retainer Clip O-Ring O-Ring for 1/2" Impact Wrench Retainer Clips 175-18406 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS

AIR TOOLS 55 RPG LOW SPEED TIRE BUFFER WITH QUICK CHANGE SLIP CHUCK LOCK-OFF THROTTLE • Brass bushings provide performance and durability in tough working conditions • Includes whip hose and exhaust hose • Quick change slip chuck for fast and easy change of buffing wheel • Built-in regulator • Lock off throttle to prevent accidental start ups • Rear exhaust directs air away from the work area • Ideal for patchwork, roughing areas for recapping and cleaning tire moldings • Overhose Kit also Available Separately (175-00873) TOUGH AND DURABLE 158-10873 REPLACEMENT PARTS & ACCESSORIES RPG HIGH SPEED TIRE BUFFER WITH OVERHOSE KIT 158-10871 • Jacobs chuck for holding buffing accessories • Lock-off throttle • FREE SPEED: 22,000 RPM • APPLICATIONS: Tire patchwork, roughing areas for recapping and cleaning tire moldings • Includes overhose kit 175-18713 ASCOT NO. MFG. NO. 175-28713 DESCRIPTION REPLACEMENT PARTS FOR AIR BUFFERS 175-00873 A-873K-OH Overhose Kit for Tire Buffers 175-18713 175-28713 RPG HIGH SPEED BUFFER KIT WITH QUICK CHANGE CHUCK • Quick change chuck for holding buffing accessories • Lock-off throttle • FREE SPEED: 22,000 RPM • APPLICATIONS: Tire patchwork, roughing areas for recapping and cleaning tire moldings • Includes overhose kit 158-11871 173-00018 173-00019 173-00020 173-00022 173-00023 QC19 QC20 QC22 QC23 A8713-TA SQC01 Trigger Assembly for Tire Buffers Replacement 7/16" Quick Change Slip Chuck ACCESSORIES FOR AIR BUFFERS QC18 Quick Chuck Adapter W/ Collar Quick Chuck Adapter W/ Spacer, 1" x 3/8" Thread Quick Chuck Adapter For 1/8" Shank Quick Chuck Adapter For 1/4" Shank Quick Chuck Adapter For 5/16" Shank TIRE BUFFER SPECIFICATIONS ASCOT NO. 158-10873 158-10871 158-11871 MFG. NO. A873K A871K A871K-QC DESCRIPTION Low Speed Tire Buffer with Quick Change Chuck High Speed Tire Buffer with Overhose kit High Speed Buffer Kit with Quick Change Chuck FREE SPEED (RPM) 2,800 22,000 22,000 LENGTH 1.75" 2.5" 1.75" WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS

56 AIR TOOLS RPG 1/2" REVERSIBLE AIR DRILL RPG 1/4" AIR SCREWDRIVER • Quick change chuck retainer • Exhaust hose • Side handle • FREE SPEED: 500 RPM • CHUCK SIZE: 1/2” • Swivel air inlet for ease of use 157-01035 EXHAUST HOSE • Forward and reverse control on top • Ergonomic handle design • Variable speed trigger • Built-in comfort grip • Rotating air inlet • Handle exhaust • NET WEIGHT: 4.6 lb. • FREE SPEED: 1,800 RPM SIDE HANDLE FORWARD AND REVERSE PARTS & ACCESSORIES ASCOT NO. MFG. NO. 175-01035 175-11035 253340 H025 DESCRIPTION 175-11035 REPLACEMENT PARTS FOR 1/2" REVERSIBLE AIR DRILL Side Handle Kit for A1035 Air Drill Air Hose Exhaust Kit for A1035 Air Drill 1035 AIR TOOL SPECIFICATIONS ASCOT NO. 157-01035 157-01038 MFG. NO. A1035 A1038 FREE SPEED (RPM) 500 2,200 AIR PRESSURE (PSI) 90 90 AIR CON. AVG (CFM) 4 6 AIR INLET (NPT) 1/4" 1/4” HOSE SIZE 3/8" 3/8" LENGTH 7.5" 8" WEIGHT (LB.) 2.86 2.42 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS

AIR TOOLS 57 RPG 3" CUT-OFF TOOL • Adjustable speed regulator for precise control • Lockoff throttle to prevent accidental start-up • Rear exhaust directs air away from work area • Durable gears for top performance and long life • FREE SPEED: 22,000 RPM RPG WHEEL WEIGHT ADHESIVE REMOVAL TOOL • High torque motor to cut through stubborn wheel weight adhesive, body pinstripes, etc. • High RPM to prevent pad from bogging down • Pad made of a tough and long-lasting material • Rubberinsulated motor housing for hand comfort • Lock-off trigger for added safety • Includes eraser pad • SPINDLE THREAD: 5/16"-24 HIGH TORQUE MOTOR RPG 1/4" MINI ANGLE DIE GRINDER • Compact, lightweight design for easy use • APPLICATIONS: High speed blending, smoothing, porting and deburring in confined areas • Right angle for easy maneuvering • FREE SPEED: 22,000 RPM 157-03252 PARTS & ACCESSORIES ASCOT NO. MFG. NO. 157-03253 DESCRIPTION REPLACEMENT PARTS FOR WHEEL WEIGHT ADHESIVE TOOL A143252-6 Replacement Eraser Pads for Wheel Weight Adhesive Removal Tool (6 per Package) 157-10875 157-03253 AIR TOOL SPECIFICATIONS ASCOT NO. 157-03252 157-10874 157-10875 MFG. NO. A143252 A874 A875 FREE SPEED (RPM) 3,700 22,000 22,000 AIR PRESSURE (PSI) 90 90 90 AIR CON. AVG (CFM) 4 5 5 AIR INLET (NPT) 1/4" 1/4" 1/4" HOSE SIZE 3/8" 3/8" 3/8" LENGTH 7.9" 7.25" 5" WEIGHT (LB.) 1.8 1.75 1 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS

58 AIR TOOLS Impact Wrenches 1/2" Super Duty Air Impact Wrench • Most popular tool in its class • Offers the sheer power and performance features to tackle the toughest of jobs • Durable and economical • TORQUE RANGE: 25-350 ft./lb. ASCOT NO. MFG. NO. 153-00231 153-02312 IR-231HA IR-231HA-2 DESCRIPTION Standard Anvil Extended Anvil DURABLE ECONOMICAL TOUGH 153-00231 1/2" SUPER DUTY AIR IMPACT WRENCH • APPLICATIONS: For tire-changing, shock and spring work, front-end work and o automotive and truck work • Pumps out 500 ft./lb torque at a free speed of 7,000 RPM • IR a two-inch extended anvil for use with flip sock 1/2" ULTRA DUTY TITANIUM AIR IMPACT WRENCH • Titanium weighs less and provides gr durability • Enhanced Twin Hammer mechanism for fast removal of frozen bolts • P forward/reverse controls for one-handed oper • TORQUE RANGE: 50-600 ft./lb max (forward), 700 ft./lb. max (r ASCOT NO. MFG. NO. 153-00244 153-02442 IR-244A IR-244A-2 DES Standard Anvil Extended Anvil 153-00244 1/2" SUPER DUTY AIR IMPACT WRENCH • Punish the toughest bolts with 7 max reverse torque and 1,100 ft./lb torque, all powered by Ingersoll Rand’ tuned motor and twin-hammer impac • At only 4.3 pounds, the 2135QXP it is powerful so your hand tires les get more work done • Ingersoll Rand’ Technology reduces the sound of the tool, sparing your ears without sacrificing a single ounce of power ASCOT NO. MFG. NO. 153-22135 153-32135 IR-2135QXPA IR-2135QXPA-2 DESCRIPTION Standard Anvil Extended Anvil ASCOT NO. MFG. NO. 153-02235 153-12235 153-32235 153-22235 153-42235 IR-2235TiMAX IR-2235TiMAX-2 IR-2235QTiMAX IR-2235QTiMAX-2 IR-2235TiMAX-2 DESCRIPTION Standard Anvil 2" Extended Anvil Quiet Version Quiet Version with 2" Extended Anvil 2" Extended Anvil 3/4" SUPER DUTY AIR IMPACT WRENCH • Non-biased motor delivers 1,050 ft./ lb. of maximum torque in both forward and reverse • Two power settings in forward and reverse • Variable speed trigger • Lighter than other 3/4" impacts in its class • Handle-vented exhaust directs air away from the operator • Silenc exhaust reduces tool noise while in use ASCOT NO. MFG. NO. 154-00259 IR-259 DESCRIPTION 3/4" Super Duty Air Impact Wrench BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS

AIR TOOLS 59 3/4" SUPER DUTY AIR IMPACT WRENCH • Powerful 3/4" wrench • Combines compac size with high output • Ideal for everything from spring work to pinion nut and track pad removal and major engine teardowns • Jumbo hammer mechanism delivers up to 1,100 ft./ lb. of torque smoothly, with less vibration ASCOT NO. MFG. NO. 154-00261 154-02613 154-02616 IR-261 IR-261-3 IR-261-6 DESCRIPTION Standard Anvil 3" Extended Anvil 6" Extended Anvil 154-00261 ASCOT NO. MFG. NO. 155-00295 156-02951 IR-295 IR-295-S DESCRIPTION Standard Anvil #5 Spline Drive 1" HEAVY DUTY AIR IMPACT WRENCH • Improved 1" drive tool perfect for truck and heavy equipment maintenance • Offers power and convenience at an affordable price • Compact, lightweight and perfect for working on suspension components • TORQUE RANGE: 100-1000 ft./lb. 3/4" MAXIMUM IMPACT AIR IMPACT WRENCH 1" D-HANDLE IMPACT WRENCH • 3/4" Maximum Impact Air Impac • 1350 ft./lb. maximum reverse t a tool that weighs just 7.4 lb. and is c enough to access tight spaces • Built t and designed to withstand tough use in rugged environments • An air mo 16% more efficient than its predec and an easy-to-clean inlet scr less downtime, better tool performance, and less money spent on compressed air • TORQUE RANGE: 200-900 ft./lb. ASCOT NO. MFG. NO. 154-12145 154-22145 154-32145 IR-2145QiMAX IR-2145QiMAX-3 IR-2145QiMAX-6 DESCRIPTION Standard Anvil 3" Extended Anvil 6" Extended Anvil STEEL CORE DESIGN 3/4" ULTRA DUTY AIR IMPACT WRENCH • Offers all of the ergonomic, power and durability enhancing features as the IR-2161 but with a 6" ex for those hard to reach applic hammer mechanism • Up t • Trouble-free, longer perf aided by the pressure-f system • Compact and only 7-5/8" long • Handle exhaus ASCOT NO. MFG. NO. 154-21617 DESCRIPTION IR-2161XP-6 3/4" Ultra Duty Air Impact Wrench ASCOT NO. MFG. NO. 155-02850 155-28506 IR-2850MAX DESCRIPTION Standard Anvil IR-2850MAX-6 Extended Anvil 154-22145 • SOLID STEEL IMPACT MECHANISM: Deliver 2,100 ft./lb. of torque • HIGHLY ENGINEERED DESIGN: Delivers the power you need over the life of the tool • STEEL CORE DESIGN: Nothing’s been proven to last longer • CHEMICAL RESISTANT HOUSING & STEEL CORE: Stands up to drops and harsh work environments • LIGHTWEIGHT: 25% lighter than the industry’s leading 1" wrench • 360° ADJUSTABLE HANDLE: The side handle rotates fully around the tool as the job demands • SWIVEL HOSE CONNECTION: Keeps cords from getting tangled so you can move freely around the garage • 6" ANVIL EXTENSION: Increases accessibility in hard to reach places WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS

60 AIR TOOLS Impact Wrenches (cont.) 1" Heavy Duty Air Impact Wrench 155-02856 • Combines exceptional power, durability and operator convenience • Delivers 1450 ft./lb. of maximum torque at 90 psi (1770 ft./lb. max torque at 120 psi) with a 5000 RPM free speed and four-position regulator 360º swivel inlet • Chemical resistant boot • Available in 6" extended anvil and 6" extended #5 spline anvil A1:O89 or high production truck tire changing ASCOT NO. MFG. NO. 155-28560 155-02856 156-28566 IR-285B IR-285B-6 IR-285BS-6 DESCRIPTION Standard Anvil 6" Extended Anvil #5 Spline Super Duty Anvil 1" ULTRA DUTY AIR IMPACT WRENCH 1" SUPER DUT AIR IMPACT WRENCH • 1" drive wrench with 1, torque to handle tough jobs in cr • Built-in pressure-feed lube s handle and built-in oil reservoir that provides continuous misting of the air motor • Available in 6" extended anvil and 6" extended #5 spline drive anvil for high production truck tire changing ASCOT NO. MFG. NO. 155-00280 155-02806 156-28006 IR-280 IR-280-6 IR-280-S6 DESCRIPTION Standard Anvil 6" Extended Anvil #5 Spline Super Duty Anvil • APPLICATIONS: Most powerful 1" wrench for spring work, tractor pads, bus maintenance and off-road/farm equipment • MAXIMUM TORQUE: 2000 ft./lb. ASCOT NO. MFG. NO. 155-00293 156-02931 IR-293 IR-293-S DESCRIPTION Standard Anvil #5 Spline Drive 1" ULTRA DUTY AIR IMPACT WRENCH 1" SUPER DUTY AIR IMPACT WRENCH • Designed for getting into cramped spaces with three-way adjustable handle • Ideal for spring work, tractor pads, bus maintenance and off-road/farm equipment • TORQUE RANGE: 150-1000 ft./lb. (1600 maximum) ASCOT NO. MFG. NO. 155-00290 156-02901 IR-290 IR-290-S DESCRIPTION Standard Anvil #5 Spline ASCOT NO. MFG. NO. 155-21710 2171XP DESCRIPTION Standard Anvil • High power-to-weight ratio • Full power reverse • 3-position power regulator • 360° swivel inlet • MAXIMUM TORQUE: 1250 ft./lb. FULL POWER REVERSE 155-21710 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS

AIR TOOLS 61 IR Cordless Tools 1/2" CORDLESS IMPACT WRENCH • 780 ft./lb. reverse torque and 1100 ft./lb. nut-busting torque from a tool weighing just 6.8 lb., best power to weight ratio in its class. • High-efficiency rare earth magnet motor, high-capacity variable speed trigger, all-metal drive train, and metal-reinforced housing enable this tool to stand up to the toughest jobs. • Optimized balance combined with an ergonomic handle and soft touch over-molded grip provide increased comfort in extended use. 1100 FT./LB. NUT BUSTING TORQUE EARTH MAGNET MOTOR 153-72522 ASCOT NO. 153-71521 153-72522 MODEL W7152 W7252 BATTERIES INCLUDED 1 1 DRIVE SIZE 1/2" (Socket Retaining Ring) 1/2" (Socket Retaining Ring, 2" Ext) ANVIL Standard MAX TORQUE FT./LB. 1000 (1,360) 2" Extended 1000 (1,360) FREE SPEED (RPM) 0-1900 0-1900 BPM 2450 2450 LENGTH IN. WEIGHT 8.1 lb. 6.7 8.1 8.1 lb. 1" CORDLESS IMPACT WRENCH • Remove hoses & trip hazards to keep operators & technicians saf • World's Most Powerful 1" Cordless Impact Wrench with best in class power-to-weight ratio • 250 bolts per charge – tackle a full day’s worth of work • 3,000 ft-lbs of nut busting torque, 2,200 ft-lbs of tightening torque • IP56 rated for tough environmental conditions • IQv Power Control System includes 3 modes: MAX Power, MID, and Snug • 360° adjustable D-handle: rotates fully around the tool as the job demands COMPATIBLE WITH IQV20 SERIES BATTERY ASCOT NO. 153-94911 153-96911 MODEL W9491-K4E W9691-K4E BATTERIES INCLUDED 1 1 DRIVE SIZE 1" Square 1" Square ANVIL Standard MAX TORQUE FT./LB. 2600 ft./lbs. 6" Extended 3000 ft./lbs. FREE SPEED (RPM) 890 890 BPM 1170 1170 LENGTH IN. WEIGHT 20-1/8" 26-1/8" 38.3 39.9 360° ADJUSTABLE D-HANDLE 153-96911 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS

62 AIR TOOLS Milwaukee Cordless Tools CORDLESS 1/2" DRIVE IMPACT WRENCH • 4 CUSTOMIZABLE MODES: Provides multiple fastening torque outputs designed for sedans, light trucks and box trucks • POWERSTATE™ BRUSHLESS MOTOR: Delivers up to 750 ft./ lb. of fastening torque and 1,100 ft./lb. of nut-busting torque • LONG MOTOR LIFE: POWERSTATE™ Brushless Motor delivers maximum power and long motor life • FASTER TIRE SERVICE: Enables users to perform faster tire service by removing the hassle of pneumatic hoses, compressors, and torque sticks • PART OF THE M18™ SYSTEM: Featuring over 175+ Tools 153-76922 LONG 1" DRIVE EXTENDED ANVIL D-HANDLE IMPACT WRENCH • POWERSTATE™ Brushless Motor delivers up to 2,000 ft-lbs of nut-busting torque and 1,900 ft-lbs of fastening torque • Install up to 200 1-1/4" bolts on a single HIGH OUTPUT™ HD12.0Ah battery • The 4-Mode DRIVE CONTROL™ provides you with greater control over the output speed and power of the MILWAUKEE® High Torque Impact Wrench • The ONE-KEY™ Technology allows you to customize, track, and manage the impact wrench with the ability to set a repeatable torque output for maximum control 155-86922 ASCOT NO. MFG. NO. 153-76920 2769-20 153-76922 2769-22 DESCRIPTION Cordless 1/2" Drive Impact Wrench – 2" Extended Anvil (Bare Tool) Cordless 1/2" Drive Impact Wrench – 2" Extended Anvil (Kit) ASCOT NO. 155-86920 155-86922 MFG. NO. 2869-20 2869-22 DESCRIPTION 1" Drive Extended Anvil D-Handle Impact Wrench (Bare Tool) 1" Drive Extended Anvil D-Handle Impact Wrench (Kit) BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS EXTENDED ANVIL

AIR TOOLS 63 CORDLESS LOW SPEED BUFFER KIT • Dedicated buffing and drilling • 2-Mode Drive Control™ • Drilling Mode: 1,200 RPM • Buffing Mode: 2,500 RPM • Runtime to complete up to 30 flat repairs on a single XC4.0Ah battery • Premium rubber overmold withstands corrosive materials and provides increased comfort when in use • Compatible with all M12™ batteries & chargers • POWERSTATE™ Brushless Motor • REDLINK PLUS™ Electronic Intelligence: • REDLITHIUM™ batteries: • Kit includes: Low Speed Tire Buffer, M12™ REDLITHIUM™ CP2.0 Battery, M12™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack, M12™ Lithium-ion Battery Charger, Quick Change Adapter, Carrying Case 158-40922 COMMERCIAL TIRE FLAT REPAIR KIT • Designed to deliver you increased productivity for high volume commercial flat repairs that commercial tire technicians demand • Kit includes: M12 FUEL™ Low Speed Tire Buffer (2409-20), M12 FUEL™ 1/2" Drill Driver (Tool Only) (2503-20), Quick Change Adapter, M12™ REDLITHIUM™ CP2.0 Battery (48-11-2420), M12™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack(48-11-2440), M12™ Lithium-ion Battery Charger (48-59-2401) & Carrying Case 158-45922 INCREASE FOR HIGH PRODUCTIVITY VOLUME REPAIRS ASCOT NO. MFG. NO. 158-40920 158-40922 DESCRIPTION 2409-20 2409-22 Cordless Low Speed Buffer Cordless Low Speed Buffer Kit ASCOT NO. MFG. NO. 158-45922 2459-22 DESCRIPTION Commercial Tire Flat Repair Kit WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS

64 AIR TOOLS Milwaukee Power Tools (cont.) CORDLESS 1/4" HIGH SPEED RATCHET KIT Our M12 FUEL™ 1/4" High Speed Ratchet Kit is part of the latest addition to our best-in-class lineup of ratchets. This MILWAUKEE® cordless ratchet kit features the fastest speed while installing and removing fasteners. The most compact head size in its class gives you more access in tight spaces. A steel yoke housing and POWERSTATE™ Brushless Motor deliver the superior durability that you expect from Milwaukee. The M12 FUEL™ High Speed Ratchets are an ideal addition to any technician tool chest, allowing you to be more productive than any other battery-powered ratchet. 172-56622 CORDLESS 3/8" RATCHET TOOL KIT • MOST POWERFUL: Delivers industry leading torque output of up to 40 ft./lb. • MOST COMPACT: Up to 20% smaller head size • MOST DURABLE: Worlds 1st brushless ratchet provides 2x longer motor life • Best-in class torque to head size ratio • Premium metal components for longer durability ASCOT NO. MFG. NO. 172-56622 2566-22 DESCRIPTION Cordless 1/4" Ratchet Tool Kit ASCOT NO. MFG. NO. 172-55721 2557-21 DESCRIPTION Cordless 3/8" Ratchet Tool Kit M18 CORDLESS TIRE INFLATOR • Fastest 18V Cordless Tire Inflator: Top off 33” light truck tires in under 1 minute • Truefill™ Technology: Auto pressure check feature activates to ensure PSI target is achieved,automatic shut-off at selected PSI prevents overinflation • Tire capacity: Premium components and unmatched durability to handle tires over 100 PSI, rated for 150 PSI max • Optimized for passenger, light truck and other medium duty tires • PSI memory preset: Save your most used PSI rating with up to 4 PSI slots • On-board hose & nozzle storage: easily store 36” hose and attachments • Accessories: Includes all brass Schrader chuck, inflation needle, inflator nozzle & Presta chuck • Anti-vibration feet: minimize tool walk while in use • Fits all M18™ Batteries ASCOT NO. MFG. NO. 477-84820 DESCRIPTION 2848-20 M18 Cordless Tire Inflator BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS PART OF THE M12™ STEM PART OF THE 12™ PART OF THE M18™ SYSTEM

AIR TOOLS 65 M18 LITHIUM 3.0AH HIGH OUTPUT BATTERY • REDLINK™ INTELLIGENCE: Our battery circuitry provides optimized performance and overload protection using total system communication between tool, battery and charger • BEST-INCLASS CONSTRUCTION: Offers long-lasting performance and the best protection against jobsite, weather and environmental conditions • FUEL GAUGE ONBOARD: Displays remaining run-time • VERSATILITY: Powers all 175+ M18™ cordless solutions • Compatible with all M18™ tools • 2 year battery warranty M18 LITHIUM 5.0AH BATTERY PACK • REDLINK™ INTELLIGENCE: Provides optimized performance and overload protection using total system communication between tool, battery and charger • BEST-IN-CLASS CONSTRUCTION: Offers long-lasting performance and durability • FUEL GAUGE ONBOARD: Displays remaining runtime for less downtime on the job • ALLWEATHER PERFORMANCE: Delivers fade free power in extreme jobsite conditions • VERSATILITY: Powers more than 175+ Milwaukee® M18™ cordless power tools • Ground transport only M18 LITHIUM HD12.0 HIGH OUTPUT BATTERY • The M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 is the best performing cold weather pack ever made, providing increased power in extreme cold weather conditions (below 0F / -18C) • Provides the most work per charge of any professional power tool battery in the industry, driving full corded replacement on the jobsite • The REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery is fully compatible with 150+ M18™ solutions 345-11835 345-11850 345-11812 ASCOT NO. MFG. NO. 345-11835 DESCRIPTION 48-11-1835 M18 Lithium High Output Battery CP3.0 ASCOT NO. MFG. NO. 345-11850 DESCRIPTION 48-11-1850 M18 Lithium 5.0AH Battery Pack ASCOT NO. MFG. NO. 345-11812 DESCRIPTION 48-11-1812 M18 Lithium High Output Battery HD12.0 M12 LITHIUM BATTERIES • REDLINK™ INTELLIGENCE: Provides optimized performance and overload protection using total system communication between tool, battery and charger • BEST-IN-CLASS CONSTRUCTION: Offers long-lasting performance and durability • ALL-WEATHER PERFORMANCE: Delivers fade-free power in extreme job site conditions • VERSATILITY: Powers 70+ Milwaukee M12 cordless solutions 345-12440 ASCOT NO. MFG. NO. 345-12430 345-12440 345-12460 345-12430 345-12460 DESCRIPTION 48-11-2430 48-11-2440 48-11-2460 M12 Lithium 3.0 Compact Battery M12 Lithium XC4.0 M12 Lithium XC6.0 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS PART OF THE M18™ SYSTEM PART OF THE M18™ SYSTEM PA M S

66 AIR TOOLS Air Hammers & Die Grinders SUPER DUTY AIR HAMMER • APPLICATIONS: For front-end and heavy exhaust work, riveting, king pin removal, bushing driving and bolt shearing • Controls starting strokes precisely with an extra-sensitive tease throttle • Super duty power, at up to 1,725 blows per minute • CHISEL SHANK DIAMETER: .401" ASCOT NO. MFG. NO. 159-00132 IR-132 DESCRIPTION Super Duty Air Hammer HEAVY DUTY ANGLE AIR DIE GRINDER SUPER DUTY POWER • For work in confined areas • Features a right angle head • APPLICATIONS: For grinding, porting, polishing, de-burring, breaking sharp edges • Selflocking throttle lever • Positive grip 1/4" capacity collet chuck FOR WORK IN CONFINED AREAS 159-00132 ASCOT NO. MFG. NO. 157-00302 IR-302B Heavy Duty Angle Air Die Grinder 157-00302 DESCRIPTION NEEDLE SCALER • APPLICATIONS: For surface preparation work involving the cleaning or removal of paint, rust, dirt or weld slag • Durable, dependable and economical FOR SURFACE PREP AND CLEANING DURABLE & ECONOMICAL ASCOT NO. MFG. NO. DESCRIPTION 157-00125 IR-125 157-00125 Needle Scaler AIR HAMMER KITS • Five-piece chisel set in a plastic pouch with .401" shank diameters • INCLUDES: Edging Tool, Tail Pipe Cutter, Straight Chisel, Cutting Chisel and Pouch SUPER DUTY MINI AIR DIE GRINDER • APPLICATIONS: For grinding, edgebreaking, de-burring, porting and polishing • Right-angle configuration • Compact, lightweight and easy to handle FIVE-PIECE CHISEL SET ASCOT NO. MFG. NO. 171-01151 171-01161 171-01171 IR-115K IR-116K IR-117K DESCRIPTION IR-115 Air Hammer Kit IR-116 Air Hammer Kit IR-117 Air Hammer Kit 171-01161 ASCOT NO. MFG. NO. 157-00307 IR-307B DESCRIPTION Super Duty Mini Air Die Grinder 157-00307 HEAVY DUTY AIR DIE GRINDER • APPLICATIONS: Designed for porting, light weld grinding and breaking sharp edges • 25,000 RPM • Self-locking throttle lever • Positive grip 1/4" capacity collet chuck with two collet wrenches ASCOT NO. MFG. NO. 157-00308 IR-308B DESCRIPTION Heavy Duty Air Die Grinder 157-00308 COMPACT & LIGHTWEIGHT EASY TO HANDLE BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS

AIR TOOLS 67 Finishing Tools & Air Drills 3/8" HEAVY DUTY AIR DRILL • Planetary gear reduction balances the load on bearings and gears, increasing tool life • Variable speed throttle makes starting holes easy • Positive action trigger stop reduces maximum speed at any time TIRE BUFFERS VARIABLE SPEED THROTTLE LEVERSTYLE TEASE TRIGGER 157-17802 • APPLICATIONS: For quick work of patchwork and roughing up low areas for recapping, tire scuffing and cleaning tire moldings • Lever style tease trigger with lock-off for easy operation JACOBS CHUCK ASCOT NO. MFG. NO 157-07802 157-17802 IR-780 IR-780 157-00327 1/2" HEAVY DUTY AIR DRILL • APPLICATIONS: Designed for drilling, hole sawing, cylinder honing and other jobs that call for a 1/2" size • Industrial grade 1/2" chuck, ball and needle bearing construction and double reduction planetary gearing for longer life • No-load speed of 500 RPM and auxiliary side handle INDUSTRIAL GRADE 1/2" CHUCK ASCOT NO. MFG. NO. 157-00327 IR-327 157-01327 IR-327LS DESCRIPTION High Speed Tire Buffer Low Speed Tire Buffer, includes Over Hose ASCOT NO. MFG. NO. 157-07803 157-17803 DESCRIPTION IR-7803A IR-7803RA Standard Air Drill Reversible Air Drill 157-17803 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS

68 AIR TOOLS Finishing Tools & Air Drills (cont.) HEAVY DUTY AIR ANGLE SANDER 7" PAD • Heavy-duty motor handles tough jobs • Lightweight at only 4.5 lb. (2.04 kg.) • Ball Bearing construction for increased tool life • APPLICATIONS: rouging body filler, removing rust, and smoothing welds SURFACE CONDITIONING KIT • KIT INCLUDES: IR301 1/4" angle head die grinder in a blow molded plastic case with two coarse and two medium grit 3" 3M Rolco™ surface conditioning pads, two coarse, two medium grit 2" 3M Rolco™ surface conditioning pads and a disc holder 157-00313 ASCOT NO. MFG. NO. DESCRIPTION 157-00313 IR-313A Heavy Duty Air Angle Sander 7" Pad HEAVY DUTY DUAL ACTION QUIET AIR SANDER 6" PAD • A built-in silencer muffles noise as you work • APPLICATIONS: Quality sander used for feather edging, metal preparation and finish work on body filler ASCOT NO. MFG. NO. 158-03012 158-00311 ASCOT NO. MFG. NO. 158-00311 IR-311A DESCRIPTION Heavy Duty Dual Action Quiet Air Sander 6" Pad DESCRIPTION IR-301-2MK Surface Conditioning Kit BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS

AIR TOOLS 69 3/8" SUPER DUTY AIR IMPACT WRENCH 3/8" SUPER DUTY AIR IMPACT WRENCH • Titanium hammer case • 280 ft./lb. of torque will remove even the toughest nuts and bolts • APPLICATIONS: Transmissions, brakes, exhaust, body repair and underhood • Tremendous power and longer life • APPLICATIONS: Popular choice of professional mechanics for under car, under hood and bench work • Handle exhaust directs air away from work • TORQUE RANGE: 20-150 ft./lb., 180 max. 152-02115 TITANIUM HAMMER CASE HIGH POWER, LONG LIFE ASCOT NO. MFG. NO. 152-02115 DESCRIPTION IR-2115TiMAX 3/8" Super Duty Air Impact Wrench ASCOT NO. MFG. NO. 152-00212 IR-212 DESCRIPTION 3/8" Super Duty Air Impact Wrench WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS

70 AIR TOOLS Air Tool Lubricants & Conditioner BLASTER AIR TOOL CONDITIONER • APPLICATIONS: Thoroughly cleans internal pneumatic tool parts, restoring them to peak performance and prolonging tool life • Breaks loose deposits that create friction and impede smooth operation • Provides long-lasting lubrication • Protects tools from freezing down to -25°F • 12 cans per case SUPER RED PNEUMATIC AIR TOOL LUBRICANT • APPLICATIONS: Dissolves gum & varnish formation • Prevents gum & varnish formation • Ensures smoother starts • Special rust & oxidation inhibitor • Clean and free running • 12 bottles per case THOROUGHLY CLEANS PARTS DISSOLVES GUM & VARNISH ASCOT NO. MFG. NO. DESCRIPTION 181-00404 16-ATC 181-01404 ATC-TS Blaster Air Tool Conditioner – 11 Oz. Blaster Air Tool Conditioner - 3.5 Oz. Aerosol ASCOT NO. MFG. NO. DESCRIPTION 181-00406 0406 Super Red Pneumatic Air Tool Oil, 32 Oz. BLASTER AIR TOOL OIL/LUBE • APPLICATIONS: Provides lubrication & prolongs tool life • Improves tool performance • Formulated for use with in-line oilers • 12 cans per case MARVEL AIR TOOL OIL • APPLICATIONS: Specially formulated f use in all piston type rotary air tools and in-line air lubricators • Prevents rust forma while providing positive lubrication for smooth starting and longer tool life • As maximum performance by dissolving gum and sludge • 6 bottles per case PROLONGS TOOL LIFE PREVENTS RUST ASCOT NO. MFG. NO. DESCRIPTION 181-00016 16-ATL Blaster Air Tool Oil/Lube – 16 Oz. ASCOT NO. MFG. NO. DESCRIPTION 181-00085 MM085 32 Oz. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS

AIR TOOLS 71 Air Tool Accessories AIR TOOL LUBRICANTS ASCOT NO. MFG. NO. 181-10510 181-10540 181-11510 181-11540 181-12228 328-10001 105-4T 115-LBK1 115-4T DESCRIPTION 105-LBK1 4 Oz. IR 105 Gr IR10 Oil & Grease Gun Head (6) 4 oz. Tubes - IR 105 Grease Refills 4 oz. IR 115 Grease IR10 Oil & Grease Gun Head (6) 4 oz. Tubes - IR 115 Grease Refills R000A2-228 Grease Gun 100-1 181-10510 1 lb. Grease for Impact Wrenches MOTOR TUNE-UP KITS • INCLUDES: the vanes, gaskets and seals for a complete tune-up • 231-TK3 also includes ball bearings IR TOOL NO. 212 231C, 231HA-2 235 244A, 244A-2 261, 271 280 Series AIR TOOL COVERS • Vinyl boots also absorb some of the tool vibration and protect air impact ratchets, wrenches and drills from external damage IR TOOL NO. KIT NO. 212 211 231C, 231HA-2 2235 244A, 244A-2 261, 261-2, 271 285B-6, 285BS-6, 285B 259 2135QXPA, 2135QXPA-2 212-Boot 211-P32 231-Boot 2235M-Boot 244-Boot 261-Boot 285-Boot 259-Boot 2135M-Boot 7803A, 7803RA 285B-6 2235TiMAX 2135QXPA, 2135QXPA-2 KIT NO. 212-TK2 231-TK3 235-TK3 244-TK2 261-TK2 280-TK2 7803-TK1 285B-TK1 2235-TK1 2135-TK2 RETAINING RINGS IR TOOL NO. 231-425A R1A-159 291-425 291-426 ASCOT TOOL NO. 175-31425 175-01590 175-91425 175-81426 DESCRIPTION Socket Retainer for IR231, 231-2 Retainer O-Ring for IR 231, 231-2 Socket Retainer for IR-281, 285 Retainer O-Ring for IR-281, 285 ASCOT TOOL NO. 176-10212 176-10221 176-12313 176-10244 176-10261 176-10280 176-17803 176-10285 176-22235 176-32135 ASCOT TOOL NO. 176-20232 176-21132 176-23122 176-13532 176-24432 176-26132 176-28532 176-25925 176-21350 IMPACT WRENCH ACCESSORIES ASCOT NO. MFG. NO. DESCRIPTION 175-23142 175-33104 175-82651 175-83071 IR 231-425 231-Boot H-082651 P-08371 IR 1/2" Impact Wrench Retainer Clip Red Protective Boot for IR 231HA-2 Impact Wrenches 1" Impact Wrench Retainer Clip O-Ring O-Ring for 1/2" Impact Wrench Retainer Clips HAMMER MECHANISM TUNE-UP KIT • INCLUDES: the anvil, hammer (or pins) and gaskets for the impact mechanism • 110-TK1 includes only the cam ball, two anvil pins and anvil spring INDUSTRIAL STRENGTH SILICONE LUBRICANT IR TOOL NO. 231C, 244A 231-2HA-2, 244A-2 2235TiMAX 2135QXPA-2 KIT NO. 231-THK1 231-THK2 ASCOT TOOL NO. 176-00231 178-01231 2235-THK1 178-02235 2135-THK1 178-02335 178-02135 ASCOT NO. MFG. NO. 328-00016 16-SL DESCRIPTION 328-00016 Blaster Silicone Lubricant – 11 Oz. • Teflon™ fluoropolymer enhances performance • Longlasting lubrication • Won’t accumulate • dust & dirt • QUANTITY: 12 per case WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE AIR TOOLS

72 AIR TOOLS Work Stations TOOL CADDY TIRE TOOL STAND • Provides easy and fast access to all those tools needed quickly when changing tires such as torque sockets, valve stem pullers, hub cap tools, air impact guns and torque sticks • Reduces installation time • Makes tire changing easier & work stations more organized • Reduces the number of trips for the technician by having all tools needed at their fingertips • WEIGHT: 35 lb. ASCOT NO. MFG. NO. 319-50015 MTTS DESCRIPTION Tool Caddy Tire Tool Stand 319-50015 MOBILE WHEEL WORK STATION • Features gas-strut assisted boom that supports the weight of those heavy impact wrenches • The suspended impact wrench is capable of rotating to the operator desired position • Features side and rear storage compartments designed to organize sockets, tire irons, lubricants, hoses and various wheel parts • Air wrench is supported and held in desired position • Air wrench suspension boom allows for directional freedom and reduces damage ASCOT NO. MFG. NO. 515-00555 WS-005 DESCRIPTION Mobile Wheel Work Station TIRE TOOL STATION • Organize your tools • Universal top tray with slots for torque sockets, etc. • Dual cradles for impact guns, 1/4" airline connections • INCLUDES: (2) 25’ x 3/8" recoil hoses with 1/4" swivel fittings 515-00555 ASCOT NO. MFG. NO. 515-02400 2400 DESCRIPTION Tire Tool Station 515-02400 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION AIR TOOLS

73 Impact Socket Sets Individual Impact Sockets Torque Wrenches & Accessories Loose Nut Prevention Wheel Centering Products Lug Nut Removal Products Wheel Attaching Hardware Tire & Wheel Service Tools Stud & Hub Cleaning Tools WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE

74 WHEEL SERVICE PRODUCTS Impact Socket Sets 1/2" DRIVE ASCOT NO. MFG. NO. 163-22219 122019K2 DESCRIPTION 1/2" Drive 4-Piece Flank Bite Damaged Nut Remover Socket Set 167-12050 167-12051 1205D 000524 1/2" Drive 5-Piece Deep Thin Wall Flip Set 1/2" Drive 5-Piece 1/2 Size Flip Socket Set DETAILS • Contains 17mm, 19mm, 21mm, 22mm • Individual sockets also available seperately: 17mm (163-22017), 19mm (16322019), 21mm (163-22021), 22mm (163-22022) • New Flank Bite design works on up to an industry leading 90% rounded lug nut • Contains 3/4" x 13/16", 19mm x 21mm, 7/8" x 15/16", 17mm x 19mm, 3" extension • Contains 18.5mm x 19.5mm, 21mm x 21.5mm, 21.5mm x 22.5mm, 22mm x 22.5mm, Extractor punch • Individual sockets also available seperately • Coated with a rust and corrosion resistant black oxide finish 163-02849 163-01150 163-01151 163-01152 163-01153 163-05153 2849 1150 1151D 1152M 1153MD 1153DD 1/2" Drive Extra Thin Wall 9-Piece SAE & Metric Wheel Protector Socket Set 1/2" Drive 13-Piece SAE Set 1/2" Drive 13-Piece Deep Set 1/2" Drive 14-Piece Metric Standard Set 1/2" Drive 14-Piece Metric Deep Set 1/2" Drive 29-Piece Metric and SAE 6 Point Deep Impact Socket Set 163-02668 2668 1/2" Drive Master 39-Piece SAE Impact Socket Set • Contains 6 SAE Sockets: 3/4" (light green), 13/16" (purple), 7/8" (green), 15/16" (brown), 1" (silver) and 1-1/16" (black) • Contains 3 Metric Sockets: 17mm (blue), 19mm (yellow) and 21mm (red) • Contains 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4" • Contains 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4" • Contains 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 26mm, 27mm • Contains 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 26mm, 27mm • Contains (Deep SAE) 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8" and 1-1/4" • Contains (Deep Metric) 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26 and 27mm • Contains (Deep Flip) 3/4" x 13/16" deep & 19mm x 21mm • Contains (Std) 7/16", 1/2",9 /16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16" and 1-1/2" • Contains (Deep) 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16" and 1-1/2" Universal 163-02669 2669 1/2" Drive Master 39-Piece Metric Impact Socket Set • Contains (Std) 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm,16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 26mm, 27mm and 30mm • Contains (Deep) 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 26mm, 27mm and 30mm Universal Joint 163-22219 167-12050 167-12051 163-02849 163-01150 163-01151 163-01152 163-01153 163-05153 163-02668 163-02669 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS Impact Socket Sets 3/4" DRIVE ASCOT NO. MFG. NO. 4626 164-04626 164-02185 164-02181 164-02110 2185M 2181D 2110 DESCRIPTION 3/4" Drive 4-Piece Budd Wheel Socket Set 3/4" Drive 5-Piece Metric Standard Truck Set 3/4" Drive 8-Piece SAE Deep Set 3/4" Drive 10-Piece Truck Set DETAILS • Contains 1-1/2" hex x 13/16 square budd wheel impact socket, 35mm x 17mm square budd wheel impact socket, 41mm x 21mm square budd wheel impact socket and 33mm deep • Contains 4 pts. Budd wheel standard length, 17mm, 27mm, 30mm, 33mm, 35mm standard • Contains 1", 1-1/16", 1-1/8", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2" • Contains 13/16" Square, 1-1/16", 1-1/8", 1-1/4" Thin Wall Deep, 1-1/2" Budd Wheel, 17mm & 21mm Square, 33mm, 35mm & 41mm Deep 75 164-04626 164-02185 ASCOT NO. MFG. NO. 1234A 169-01234 165-05626 165-03197 165-03119 165-03190 166-04191 5626 3197M 3119 3190 4191 1" DRIVE & MISCELLANEOUS SETS DESCRIPTION 4-Piece Impact Adapter Socket Set 1" Drive 5-Piece Budd Wheel Socket Set 1" Drive 7-Piece Metric Truck Set 1" Drive 9-Piece Large Truck Socket Set 1" Drive 9-Piece SAE Truck Set #5 Spline Drive 9-Piece SAE Truck Set 164-02181 164-02110 DETAILS • Contains 1/2" (F) x 3/4" (M) adapter, 3/4" (F) x 1" (M) adapter, 3/4" (F) x 1/2" (M) adapter, 1" (F) x 3/4" (M) adapter • Contains 1-1/2" hex x 13/16" square budd wheel impact socket, 35mm x 17mm square budd wheel impact socket, 38mm x 20mm square budd wheel impact socket, 41mm x 21mm square budd wheel impact socket and 33mm deep • Contains 17mm, 21mm, 4 pts. budd wheel standard length, 27mm, 33mm, 36mm, 41mm deep • Contains 13/16" & 15/16" square, 33mm, 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2" & 2-1/2" deep sockets • Contains 13/16", 4 points budd wheel standard length, 7/8", 15/16", 1", 1-3/16", 1-1/2" deep with inside lip, 1-1/16", 1-1/8", 1-1/4" thin wall deep • Contains 13/16", 4 points budd wheel standard length, 7/8", 15/16", 1", 1-3/16", 1-1/2" deep with inside lip, 1-1/16", 1-1/8", 1-1/4" thin wall deep 165-03197 169-01234 165-05626 166-04191 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS

76 WHEEL SERVICE PRODUCTS Individual Impact Sockets ASCOT NO. MFG. NO. DESCRIPTION METRIC 163-10100 163-10111 163-10120 163-10130 163-10142 163-10150 163-10162 163-10170 163-10182 163-10190 163-10210 163-10221 163-10262 163-10270 163-10140 163-10160 163-10180 163-10200 163-10220 163-10240 163-10260 163-10280 163-01030 163-10320 163-10360 163-10400 1010M 1011M 1012M 1013M 1014M 1015M 1016M 1017M 1018M 1019M 1021M 1022M 1026M 1027M 1014 1016 1018 1020 1022 1024 1026 1028 1030 1032 1036 1040 ASCOT NO. MFG. NO. 163-10172 163-10183 163-10191 163-10211 163-10223 163-10230 163-10241 163-10261 163-10282 1017MEDT 1018MEDT 1019MEDT 1021MEDT 1022MEDT 1023MEDT 1024EDT 1026EDT 1028EDT 1/2" Drive x 10mm Std. 1/2" Drive x 11mm Std. 1/2" Drive x 12mm Std. 1/2" Drive x 13mm Std. 1/2" Drive x 14mm Std. 1/2" Drive x 15mm Std. 1/2" Drive x 16mm Std. 1/2" Drive x 17mm Std. 1/2" Drive x 18mm Std. 1/2" Drive x 19mm Std. 1/2" Drive x 21mm Std. 1/2" Drive x 22mm Std 1/2" Drive x 26mm Std. 1/2" Drive x 27mm Std. SAE 1/2" Drive x 7/16" Std. 1/2" Drive x 1/2" Std. 1/2" Drive x 9/16" Std. 1/2" Drive x 5/8" Std. 1/2" Drive x 11/16" Std. 1/2" Drive x 3/4" Std. 1/2" Drive x 13/16" Std. 1/2" Drive x 7/8" Std. 1/2" Drive x 15/16" Std. 1/2" Drive x 1" Std. 1/2" Drive x 1-1/8" Std. 1/2" Drive x 1-1/4" Std. DESCRIPTION METRIC 1/2" Drive x 17mm Extra Thin Wall 1/2" Drive x 18mm Extra Thin Wall 1/2" Drive x 19mm Extra Thin Wall 1/2" Drive x 21mm Extra Thin Wall 1/2" Drive x 22mm Extra Thin Wall 1/2" Drive x 23mm Extra Thin Wall SAE 1/2" Drive x 3/4" Extra Thin Wall 1/2" Drive x 13/16" Extra Thin Wall 1/2" Drive x 7/8" Extra Thin Wall 1/2" DRIVE 17MM EXTRA THIN WALL DEEP MERCEDES SOCKET • Features a 17mm x 6-point "flower petal design" • Suited for rugged impact use and features a detent ball hole in the base to allow for secure attachment to those tools • Works on 2012 and newer model year Mercedes Benz S-Class as well as those select 2007 and newer model year CL-Class, GL-Class, GLK-Class, GLS-Class and others that use 17mm convex "flower petal" lug bolts • Protective sleeve to prevent damage to the wheel • Designed for use with 1/2-Inch Square Drives ASCOT NO. MFG. NO. 163-10174 DESCRIPTION 1017MEDTM 1/2" Drive 17mm Extra Thin Wall Deep Mercedes socket ASCOT NO. MFG. NO. 163-10101 163-10121 163-10131 163-10143 163-10151 163-10163 163-10171 163-22017 163-01018 163-01019 163-22019 163-01021 163-22021 163-10222 163-22022 163-10263 163-10271 163-10283 163-01032 163-01033 163-10141 163-10161 163-10181 163-10201 163-01022 163-01024 163-01026 163-10281 163-10300 163-11032 163-01034 163-01036 163-10401 163-01048 163-15260 1010MD 1012MD 1013MD 1014MD 1015MD 1016MD 1017MD 122019K2-17 1018MD 1019MD 122019K2-19 1021MD 122019K2-21 1022MD 1026MD 1027MD 1028MD 1032MD 1033MD 1014D 1016D 1018D 1020D 1022D 1024D 1026D 1028D 1030D 1032D 1034D 1036D 1040D 1048D 1526SD DESCRIPTION METRIC 1/2" Drive x 10mm Deep 1/2" Drive x 12mm Deep 1/2" Drive x 13mm Deep 1/2" Drive x 14mm Deep 1/2" Drive x 15mm Deep 1/2" Drive x 16mm Deep 1/2" Drive x 17mm Deep 1/2" Drive x 17mm Deep 1/2" Drive x 18mm Deep 1/2" Drive x 19mm Deep 1/2" Drive x 19mm Deep 1/2" Drive x 21mm Deep 1/2" Drive x 21mm Deep 1/2" Drive x 22mm Deep 122019K2-22 1/2" Drive x 22mm Deep 1/2" Drive x 26mm Deep 1/2" Drive x 27mm Deep 1/2" Drive x 28mm Deep 1/2" Drive x 32mm Deep 1/2" Drive x 33mm Deep SAE 1/2" Drive x 7/16" Deep 1/2" Drive x 1/2" Deep 1/2" Drive x 9/16" Deep 1/2" Drive x 5/8" Deep 1/2" Drive x 11/16" Deep 1/2" Drive x 3/4" Deep 1/2" Drive x 13/16" Deep 1/2" Drive x 7/8" Deep 1/2" Drive x 15/16" Deep 1/2" Drive x 1" Deep 1/2" Drive x 1-1/16" Deep 1/2" Drive x 1-1/8" Deep 1/2" Drive x 1-1/4" Deep 1/2" Drive x 1-1/2" Deep 1/2" Drive x 13/16" Square 8-Point ASCOT NO. MFG. NO. DESCRIPTION METRIC 167-12110 167-12179 167-12910 167-12911 167-12912 167-18195 167-21215 167-21225 167-22225 167-12460 167-12461 167-12490 167-12510 1211D 1271DT 1291 1291D 1291DT 1A7535 1A7538 1A7542 1246D 1246DT 1249D 1251D 1/2" Dr. x 11mm x 12mm Chrome Deep Flip 1/2" Dr. x 17mm x 19mm Deep Thin Flip 1/2" Dr. x 19mm x 21mm Std. Flip 1/2" Dr. x 19mm x 21mm Deep Flip 1/2" Dr. x 19mm x 21mm Deep Extra Thin Flip 1/2" Dr. x 18.5mm x 19.5mm Deep Flip 1/2" Dr/ x 21mm x 21.5mm Deep Flip 1/2" Dr. x 21.5mm x 22.5mm Deep Flip 1A7540 1/2" Dr. x 22mm x 22.5mm Deep Flip SAE 1/2" Dr. x 3/4" x 13/16" Deep Flip 1/2" Dr. x 3/4" x 13/16" Deep Extra Thin Flip 1/2" Dr. x 7/8" x 15/16" Deep Flip 1/2" Dr. x 1" x 1-1/16" Deep Flip BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS 1/2" DR EXTRA THIN WALL IMPACT SOCKETS 1/2" DR STANDARD IMPACT SOCKETS 1/2" DR FLIP IMPACT SOCKETS 1/2" DR DEEP IMPACT SOCKETS

WHEEL SERVICE PRODUCTS ASCOT NO. MFG. NO. DESCRIPTION 164-02017 164-02019 164-02020 164-02021 164-02024 164-02026 164-02028 164-02030 164-02032 164-02033 164-02034 2017MS 2019MS 2021MS 2024D 2026S 2028D 2030 2032D 164-20270 164-20271 164-20301 164-20330 164-02035 164-20350 164-20360 164-02041 164-20260 164-20300 164-02036 164-20401 164-20402 164-02038 164-02042 164-02044 164-02046 164-20480 164-20481 164-20482 164-02052 164-02056 164-02060 164-02323 2027M 2030M 2033M 2035M 3/4" Drive x 17mm Square 3/4" Drive x 19mm Square 2020MS 3/4" Drive x 20mm Square 3/4" Drive x 21mm Square 3/4" Drive x 3/4" Deep 3/4" Drive x 13/16" Square 3/4" Drive x 7/8" Deep 3/4" Drive x 15/16" Std. 3/4" Drive x 1" Deep 2033MD 3/4" Drive x 33mm Deep 2034DT 3/4" Drive x 27mm Std. 2027MD 3/4" Drive x 27mm Deep 3/4" Drive x 30mm Std. 3/4" Drive x 33mm Std. 3/4" Drive x 35mm Std. 2035MD 3/4" Drive x 35mm Deep 2036MD 3/4" Drive x 36mm Deep 2041MD 3/4" Drive x 41mm Deep SAE 2026D 2030D 2036DT 2040D 2040DT 2038D 2042D 2044D 2046D 2048 2048D 2052D 2056D 2060D 2323C 3/4" Drive x 13/16" Deep 3/4" Drive x 15/16" Deep 3/4" Drive x 1-1/8" Deep Thin Wall 3/4" Drive x 1-1/4" Deep 3/4" Drive x 1-1/4" Deep Thin Wall 3/4" Drive x 1-3/16" Deep 3/4" Drive x 1-5/16" Deep 3/4" Drive x 1-3/8" Deep 3/4" Drive x 1-7/16" Deep 3/4" Drive x 1-1/2" Std. 3/4" Drive x 1-1/2" Deep 2048DR 3/4" Drive x 1-1/2" Limited Depth 3/4" Drive x 1-5/8" Deep 3/4" Drive x 1-3/4" Deep 3/4" Drive x 1-7/8" Deep 3/4" Drive x 1-1/2" Hex x 13/16" Square 3/4" Drive x 1-1/16" Deep Thin Wall METRIC ASCOT NO. MFG. NO. DESCRIPTION METRIC 165-03017 165-03019 165-03020 165-03021 165-03027 165-30302 165-03033 165-03035 165-30381 165-30410 165-03041 165-03321 165-03517 165-03820 165-03026 165-03030 165-03034 165-03042 165-03044 165-03046 165-03052 165-03054 165-03056 165-03060 165-03323 165-30280 165-30281 165-30300 165-30301 165-30320 165-30321 165-30361 165-30362 165-30380 165-30401 165-30402 165-30420 165-30481 165-30482 ASCOT NO. MFG. NO. DESCRIPTION METRIC 166-04033 166-04035 166-04041 166-04026 166-04034 166-40360 166-40361 166-04038 166-04040 166-04042 166-04048 166-40480 166-04323 4033MD #5 Spline x 33mm Deep 4035MDT #5 Spline x 35mm Deep Thin Wall 4041MDT #5 Spline x 41mm Deep Thin Wall SAE 4026S 4034DT 4036D 4036DT 4038 4040DT 4042DT 4048D 4048DT 4323C #5 Spline x 13/16" Square #5 Spline x 1-1/16" Deep Thin Wall #5 Spline x 1-1/8" Deep #5 Spline x 1-1/8" Deep Thin Wall #5 Spline x 1-3/16" Std. #5 Spline x 1-1/4" Deep Thin Wall #5 Spline x 1-5/16" Deep Thin Wall #5 Spline x 1-1/2" Deep w/Inside Lip #5 Spline x 1-1/2" Deep Thin Wall #5 Spline x 13/16" Square x 1-1/2" Hex 3017MS 3019MS 1" Drive x 17mm Square 1" Drive x 19mm Square 3020MS 1" Drive x 20mm Square 3021MS 1" Drive x 21mm Square 3027MD 1" Drive x 27mm Deep 3030MD 1" Drive x 30mm Deep 3033MD 1" Drive x 33mm Deep 3035MD 1" Drive x 35mm Deep 3038MD 1" Drive x 38mm Deep 3041MDT 3041MD 3321MC 3517MC 3026S 3030S 3034DT 3042D 3044D 3046D 3052D 3054D 3056D 3060D 3323C 3028 3028D 3030 3030D 3032 3032D 3036D 3036DT 3038D 3040D 3040DT 3042DT 3048D 77 1" Drive x 41mm Deep Thin Wall 1" Drive x 41mm Deep 1" Drive 41mm x 21mm Square 1" Drive x 35mm Deep x 17mm Sq. 3820MC 1" Drive x 38mm Deep x 20mm Sq. SAE 1" Drive x 13/16" Square 1" Drive x 15/16" Square 1" Drive x 1-1/16" Thin Wall Deep 1" Drive x 1-5/16" Deep 1" Drive x 1-3/8" Deep 1" Drive x 1-7/16" Deep 1" Drive x 1-5/8" Deep 1" Drive x 1-11/16" Deep 1" Drive x 1-3/4" Deep 1" Drive x 1-7/8" Deep 1" Drive 1-1/2" Hex x 13/16" Square 1" Drive x 7/8" Std. 1" Drive x 7/8" Deep 1" Drive x 15/16" Std. 1" Drive x 15/16" Deep 1" Drive x 1" Std. 1" Drive x 1" Deep 1" Drive x 1-1/8" Deep 1" Drive x 1-1/8" Deep Thin Wall 1" Drive x 1-3/16" Deep 1" Drive x 1-1/4" Deep 1" Drive x 1-1/4" Deep Thin Wall 1" Drive x 1-5/16" Deep Thin Wall 1" Drive x 1-1/2" Deep w/Inside Lip 3048DR 1" Drive x 1-1/2" Deep - Standard ASCOT NO. MFG. NO. DESCRIPTION 169-01002 169-01003 169-01005 169-01020 169-02006 169-02010 169-02030 169-20100 169-02013 169-03006 169-03010 169-03013 169-03020 169-04010 169-04020 1002E 1003E 1005E 1020A 2006E 2010A 2030A 2010E 2013E 3006E 3010E 3013E 3020A 4010A 4020A 1/4" Drive x 2" Chrome Extension 1/2" Drive x 3" Extension 1/2" Drive x 5" Extension 1/2" Drive Female x 3/4" Male Adapt. 3/4" Drive x 6" Extension 3/4" Drive Female x 1/2" Male Adapt. 3/4" Drive Female x 1" Male Adapt. 3/4" Drive x 10" Extension 3/4" Drive x 13" Extension 1" Drive x 6" Extension 1" Drive x 10" Extension 1" Drive x 13" Extension 1" Drive Female x 3/4" Male Adapt. #5 Spline Female x 3/4" Male Adapt. #5 Spline Female x 1" Male Adapt. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS #5 SPLINE DR IMPACT SOCKETS 3/4" DR IMPACT SOCKETS IMPACT EXTENSIONS & ADAPTERS 1" DR IMPACT SOCKETS

78 WHEEL SERVICE PRODUCTS Torque Wrenches & Accessories HEAVY DUTY TRUCK TORQUE EXTENSIONS PASSENGER CAR AND LIGHT TRUCK TORQUE SOCKETS • Sockets properly torque wheel nuts to exact factory specs • Prevents warping of rotors, which causes brake pulsation • Eliminates broken studs and nuts • Avoids damage to aluminum alloy wheels • Stops customer complaints about over-tightened lug nuts • Strobe marks stop turning at the CORRECT torque • Heavy duty truck extensions can convert sockets into Torque Sockets • Available in 3/4" and 1" drives 495-30322 ASCOT NO. MFG. NO. DESCRIPTION 495-30322 KTI30322A 10-Piece 1/2" Drive Torque Socket Set. SET INCLUDES: Green, Red, Yellow, Blue, Grey, Light Brown, Brown, White, Turquoise, Light Green 495-30323 KTI30323A 10-Piece 1/2" Torque Sticks For Auto and Light Truck. SET INCLUDES: Mud, Off-White, Light Yellow, Light Tan, Quartz, Red Orange, Charcoal, Orange, Light Blue, Light Purple 495-30950 KTI30950 495-30960 KTI30960 5-Piece 1/2" Drive Torque Socket Set. SET INCLUDES: Grey, Light Brown, White, Turquoise, Charcoal 6-Piece 1/2" Drive Torque Socket Set. SET INCLUDES: Green, Red, Yellow, Off White, Light Yellow, Orange" ASCOT NO. MFG. NO. 495-30304 495-30305 495-30306 495-30307 495-30308 495-30309 495-30310 495-30311 495-30312 495-30313 495-30327 495-30328 495-30329 495-30334 495-30336 495-30337 495-30338 495-30339 495-30340 495-30341 495-30342 495-30343 495-30898 495-30899 495-30912 KTI30304A KTI30305A KTI30306A KTI30307A KTI30308A KTI30309A KTI30310A KTI30311A KTI30312A KTI30313A KTI30327A KTI30328A KTI30329A KTI30334A KTI30336A KTI30337A KTI30338 KTI30339 KTI30340A KTI30341A KTI30342A KTI30343A KTI30898A KTI30899A KTI30912 DESC. Green Red DRIVE SIZE 17mm 17mm TORQUE OTHER PASSENGER CAR & LIGHT TRUCK TORQUE SOCKETS: KIT CONTENTS 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" Yellow Blue Grey Black Light Brown Brown White Turquoise Light Blue Charcoal Off White Light Yellow Orange Dark Green Pearl Copper Pink Mud Quartz Light Tan Red Orange Light Purple Light Green Purple 19mm (3/4") 19mm (3/4") 19mm (3/4") 21mm 21mm 21mm 22mm (7/8") 22mm (7/8") 22mm (7/8") 21mm 17mm 17mm 22mm (7/8") 22mm (7/8") 22mm (7/8") 22mm (7/8") 14mm 19mm (3/4") 19mm (3/4") 21mm 21mm 24mm 19mm (3/4") 495-16003 55 ft./lb. 80 ft./lb. 65 ft./lb. Deep Well 80 ft./lb. Deep Well 100 ft./lb. 60 ft./lb. 80 ft./lb. 100 ft./lb. 120 ft./lb. Deep Well 140 ft./lb. Deep Well 100 ft./lb. 147 ft./lb. Deep Well 90 ft./lb. 113 ft./lb. 75 ft./lb. 60 ft./lb. 110 ft./lb. 154 ft./lb. 80 ft./lb. 120 ft./lb. 90 ft./lb. 110 ft./lb. 160 ft./lb. 140 ft./lb. Deep Well 110 ft./lb. Deep Well 495-16014 495-16015 495-16016 495-16017 LT1600U LT1600P LT1600R LT1600S LT1600T Heavy Duty Truck Torque Extensions ASCOT NO. MFG. NO. 495-16000 495-16001 495-16002 DESCRIPTION LT1600M LT1600N LT1600Q 3/4" Dr. Truck Torque Extension - 475 ft./lb. 3/4" Dr. Truck Torque Extension - 250 ft./lb. 3/4" Dr. Truck Torque Extension - 175 ft./lb. 3/4" Dr. Truck Torque Extension - 350 ft./lb. 1" Drive Truck Torque Extension - 475 ft./lb. 1" Drive Truck Torque Extension - 250 ft./lb. 1" Drive Truck Torque Extension - 350 ft./lb. 1" Drive Truck Torque Extension - 175 ft./lb. 169-13413 3/4" X 1" X 13" TORQUE WRENCH EXTENSION ASCOT NO. MFG. NO. DESCRIPTION 169-13413 13413E 168-12997 168-12999 12297 12299 3/4" Dr. x 1" Dr. x 13" Impact Extension 3/4" Drive Block for Flex Hinge Torque Wrench 1" Drive Block for Flex Hinge Torque Wrench BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS MEDIUM/HEAVY DUTY TORQUE SOCKETS • Sockets properly torque wheel nuts to exact factory specs • Prevents warping of rotors, which causes brake pulsation • Eliminates broken studs and nuts • Avoids damage to aluminum alloy wheels • Stops customer complaints about overtightened lug nuts • Strobe marks stop turning at the CORRECT torque • Includes heavy duty case PROPERLY TORQUES WHEEL NUTS 10-PIECE 1/2" DRIVE TORQUE LIMITING SOCKE • Contains the most popular t to service the majorit cars and light trucks • SE All 10 torque sockets lis • Lifetime warranty • Hea blow molded case • Lug nut t application chart included 79 168-02880 ASCOT NO. MFG. NO. 168-02880 12880 DESCRIPTION 10-Piece Torque Limiting Socket Set ASCOT NO. MFG. NO. DESCRIPTION 10-PIECE 1/2" DRIVE TORQUE LIMITING SOCKET SET: KIT CONTENTS 168-21755 168-21780 168-21910 168-21965 168-21980 168-22180 168-22212 168-22214 168-22610 168-23014 ASCOT NO. MFG. NO. 495-30400 495-30940 DESCRIPTION KTI30400A 4-Piece Heavy Duty Truck Torque Socket Set. SET INCLUDES: HD Red, HD Brown, HD Black and HD Yellow KTI30940 4-Piece 1" Drive Truck Torque Socket Set. SET INCLUDES: 1-1/4" 1" Drive Torque Hex 250 ft./ lb. Red, 33mm 1" Drive Torque Hex 475 ft./lb. Brown, 1-1/2" 1" Drive Torque Hex 475 ft./lb. Black; 13/16" 1" Drive Torque Sq. 475 ft./lb. Yellow ASCOT NO. MFG. NO. DESC. DRIVE SIZE 495-30908 KTI30908A HD Red 495-30909 KTI30909A HD Brown 495-30910 KTI30910A HD Black 495-30911 KTI30911A HD Yellow 495-30913 KTI30913A HD Grey 495-30914 KTI30914A HD Grey 495-30918 KTI30918A HD Red 1" 1" 33mm 1-1/2" 13/16" TORQUE OTHER MEDIUM/HEAVY DUTY TORQUE SOCKETS: KIT CONTENTS 1-1/4" 1" 1" 3/4" 495-30919 KTI30919A HD Brown 3/4" 1" 33mm 1" 33mm 1-1/4" 33mm 250 ft./lb. 475 ft./lb. 475 ft./lb. 475 ft./lb. 550 ft./lb. 550 ft./lb. 250 ft./lb. 475 ft./lb. ASCOT NO. MFG. NO. DESCRIPTION 168-22110 122110M 1/2" DRIVE 22MM TORQUE SOCKETS • Constructed from heat treated spring steel • Solid one-piece construction • Deep well 168-22110 121755M 1/2" Drive 17mm - 55 ft./lb. Torque Socket - Green 121780M 1/2" Drive 17mm - 80 ft./lb. Torque Socket - Red 1/2" Drive 19mm (3/4") - 100 ft./lb. Torque Socket - Gray 121910M 121965M 1/2" Drive 19mm (3/4") - 65 ft./lb. Torque Socket - Yellow 121980M 1/2" Drive 19mm (3/4") - 80 ft./lb. Torque Socket - Blue 122180M 1/2" Drive 21mm - 80 ft./lb. Torque ocket - Light Brown 122212M 1/2" Drive 22mm (7/8") - 120 ft./lb. Torque Socket - White 122214M 1/2" Drive 22mm (7/8") - 140 ft./lb. Torque Socket - Turquoise 1/2" Drive 13/16" - 100 ft./lb. Torque Socket - Brown 1/2" Drive 15/16" - 140 ft./lb. Torque Socket - Light Green 122610 123014 1/2" Drive 22mm 110 ft./lb Torque Socket - Copper APPLICATIONS: Buick LaC 2010+, Regal 2011+, Cadillac XTS 2011+, Chevrolet Camar 2011+, Saab 9-4X 2010+ Extended 168-12254 122115M 1/2" Drive 22mm 154 ft./lb. Torque Socket - Pink APPLICATIONS: Toyota Land Cruiser 2004-06, 2008+, Tundra 168-12254 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS

80 WHEEL SERVICE PRODUCTS Torque Wrenches & Accessories (cont.) 2022 LUG NUT TORQUE APPLICATION CHART • Wall chart measuring 26-3/4" x 39-1/4" • Provides lug nut specifications for cars and light trucks to Model Year 2022 • For use with Original Equipment wheels • Laminated for durability • Shipped in a protective mailing tube *Appearance of chart may vary LUG NUT TORQUE CHART 2022 NAME ACURA All Models Except: NSX RL/RLX TL TLX ALFA ROMEO All Models Except: Giulia ASTON MARTIN DB7 DB9/Vantage DB9/DB11/DBS/Vantage 21 mm hex 22 mm hex Rapide/Virage Vanquish Vanquish YEAR SIZE TORQUE (FT./LBS.) 90-22 19 mm 80 17-22 19 mm 125 05-20 22 mm 94 09-14 22 mm 94 21-22 N/A 94 90-20 19 mm 72 17-22 19 mm 89 COLOR Blue N/A Copper Copper N/A Blue Grey 94-04 19 mm 65-75 Blue 05-07 13/16” 60/100* Brown 10-22 13/16” 60/133* N/A 08-09 21 mm 60/133* N/A 08-09 22 mm 60/100* Copper 10-19 13/16” 60/133* N/A 01-06 19 mm 60/100* 14-18 19 mm 60/133* *Torque to 1st number in star pattern then torque again to 2nd number. AUDI All Models All Models Except: A3/A3 Quattro/S3 Cabriolet BENTLEY Arnage Arnage RL Arnage Azure Azure Le Mans Azure Brooklands Brooklands Continental All Except: GT GT/GTC R Le Mans/T Le Mans Flying Spur Supersports Eight/Turbo R Flying Spur Flying Spur Mulsanne BMW All Models Except: 2 Series 3 Series Sedan 3 Series Sports Wagon 4 Series 5 & 6 Series 7 & 8 Series i3/i3s/i4/i8 Z4 BUICK All Models Except: LaCrosse Regal Allure CADILLAC All Models Except: 90-97 19 mm 81 98-22 17 mm 89 2022 N/A 94-98 17 mm 81 e-tron GT/RS e-tron GT 2022 N/A 118 99-01 17 mm 74 01-02 17 mm 74 02-09 17 mm 96-100 01-02 17 mm 77-85 06-10 17 mm 96-100 08-10 17 mm 96-100 Grey N/A 100 N/A N/A N/A Red Red N/A 96-03 17 mm 45-50 Green N/A N/A 93-98 17 mm 45-50 Green N/A 90-03 17 mm 45-50 Green N/A N/A N/A N/A N/A 20-22 17 mm 133/122 03-18 17 mm 107 01-02 17 mm 77-85 06-13 17 mm 107 10-17 17 mm 107 90-98 17 mm 45-50 Green Green 14-18 17 mm 107 20-22 17 mm 133/122 Green Green 11-20 17 mm 133 90-16 17 mm 88 14-22 17 mm 103 12-22 17 mm 103 14-17 17 mm 103 14-22 17 mm 103 11-22 17 mm 103 02-22 17 mm 103 14-22 17 mm 103 19-22 17 mm 103 90-20 19 mm 100 10-16 22 mm 110 11-17 22 mm 110 2010 22 mm 110 90-22 19 mm 100 ATS-V/CTS (Blue tint nut) 2016 19 mm 110 ATS-V/CTS (Silver tint nut) 2016 13/16” 140 ATS-V/CTS CT4 V Blackwing CT5 CT6 CTS Catera DeVille H.D. Special XTS CHEVROLET All Models Except: Aveo/Aveo5 Camaro Camaro (Blue tint nut) Camaro (Silver tint nut) Camaro Camaro Caprice Corvette Epica Impala Impala Limited Malibu Malibu Limited Metro Optra Prizm SS CHRYSLER All Models Except: 300 300 Crossfire LeBaron Sebring LX/LXi Sebring LX/LXi Coupe DODGE Avenger Avenger Avenger Caliber Charger Charger Challenger Challenger 17-19 22 mm 140 2022 N/A 140 20-22 22 mm 140 16-20 22 mm 110 08-15 22 mm Contact Dealer 97-01 17 mm 80 97-99 22 mm 140 13-19 22 mm 110 90-22 19 mm 100 04-10 19 mm 81 10-11 22 mm 140 2012 22 mm 110 2012 22 mm 140 13-15 22 mm 110 16-22 13/16” 140 11-16 13/16” 140 20-22 17 mm 140 04-06 21 mm 81 14-20 19 mm 110 14-15 19 mm 100 13-15 22 mm 110 2016 22 mm 110 90-01 17 mm 45 04-07 19 mm 81 90-02 21 mm 76 14-17 22 mm 140 90-17 19 mm 100 11-13 21 mm 110 14-22 21 mm 130 04-08 17 mm 81 1990 19 mm 95 N/A N/A N/A N/A N/A N/A N/A N/A N/A Grey Copper Copper Copper Grey N/A N/A Aqua N/A Aqua Copper N/A Red Aqua Copper Grey Grey Aqua Copper Aqua Copper N/A N/A N/A N/A N/A Grey Copper Copper Green Grey Lt. Brown Aqua Grey N/A N/A N/A Grey 99-00 19 mm 65-80 Blue 01-03 21 mm 65-80 Sebring Base/Ltd Coupe 04-05 21 mm 65-80 95-98 21 mm 85-100 99-00 21 mm 65-80 08-14 19 mm 100 07-12 21 mm 100 06-10 22 mm 100 11-13 22 mm 110 08-10 22 mm 100 11-13 22 mm 110 Challenger/Charger Except 14-22 22 mm 130 SRT Models Dart Daytona/Dynasty Intrepid Magnum Neon Omni/Shadow/Spirit Stealth Stratus Sedan Stratus Coupe SX 2.0 Viper Viper FERRARI All Models Except: 348 456/512 550/575 Enzo F40/F50 F355/F512M LaFerrari Mondial t/Testarossa Roma 15-22 19 mm 111 13-16 19 mm 100 90-93 19 mm 95 93-04 13/16” 85-115 05-08 22 mm 100 95-05 19 mm 85-115 90-95 19 mm 85-115 91-96 19 mm 85-100 95-06 19 mm 85-115 01-05 19 mm 65-80 03-05 19 mm 85-115 92-14 19 mm 80-100 15-17 19 mm 107 00-22 17 mm 74 90-95 17 mm 72 92-03 17 mm 86 97-02 17 mm 100 03-04 17 mm 481.5 90-97 19 mm 468 94-99 17 mm 86 14-17 19 mm 516.3 90-93 19 mm 72 21-22 N/A 90 Lt. Brown Lt. Brown N/A Lt. Brown Grey N/A White Copper Copper Copper Aqua N/A Grey Grey N/A Copper N/A N/A Grey N/A Grey N/A Grey N/A Red Red N/A N/A N/A N/A N/A N/A N/A N/A MAYBACH All Models MAZDA All Models Except: Mazda 3/3 Sport/6 Millenia MX-5 Miata MCLAREN All Models Except: Senna MERCEDES-BENZ All Models Except: Grey Grey CARS (AMERICAN / IMPORT) NAME YEAR SIZE TORQUE (FT./LBS.) FIAT 124 Spider 500 with steel wheels with steel wheels 500L with steel wheels FORD Aspire C-Max Contour Country Squire Crown Victoria Crown Victoria Escort with aluminum wheels Festiva Fiesta Fiesta Five Hundred/Freestyle Focus Focus/Fusion Except: Fusion Sport GT GT Mustang Mustang Mustang Police Interceptor Sedan Probe Taurus Taurus Tempo/Thunderbird Thunderbird GENESIS G70/G90 G80 G80 G80 HONDA All Models Except: Civic Type R HYUNDAI All Models Except: Elantra Sedan/Elantra N Ioniq Accent Elantra GT Sonata/Veloster INFINITI All Models JAGUAR All Models Except: F-Type/XE S-Type Super V8/Vanden Plas 17-20 19 mm 94 12-19 17 mm 75 12-13 17 mm 63 14-16 17 mm 66 14-20 17 mm 89 14-16 17 mm 63 94-97 21 mm 65-87 13-18 19 mm 100 95-00 19 mm 94 90-91 13/16" 85-105 90-03 19 mm 85-105 04-11 19 mm 100 90-03 21 mm 65-87 90-93 14 mm 65-87 11-13 19 mm 98 14-19 19 mm 100 05-07 19 mm 100 00-05 19 mm 94 06-20 19 mm 100 17-19 19 mm 150 05-06 13/16" 111 17-21 13/16" 150 90-04 19 mm 85-105 05-14 13/16" 100 15-22 22 mm 150 13-14 19 mm 110 90-03 13/16" 85-105 04-19 13/16" 100 90-97 19 mm 85-105 02-05 13/16" 100 COLOR Grey Red Red Red Red N/A Lt. Brown Grey Grey N/A N/A Grey N/A 02-03 13/16" 74-100 Brown N/A Grey Grey Grey Grey Grey N/A N/A N/A N/A Brown Pink N/A 90-97 21 mm 65-87 Copper N/A Brown N/A Brown 17-22 19 mm 79-94 Blue Grey Grey Grey 90-22 19 mm 80 17-21 19 mm 94 90-17 21 mm 65-80 17-22 19 mm 79-94 17-22 19 mm 79-94 18-22 19 mm 79-94 18-20 19 mm 79-94 18-22 19 mm 79-94 90-22 21 mm 80 90-09 19 mm 75 14-22 20 mm 92 00-08 21 mm 92 04-09 22 mm 92 XF/XFR/XFR-S/XJ/XJ8/XJR 04-22 23 mm 92 XK/XKR/XKR-S 07-15 24 mm 92 KIA All Models Except: Cadenza/Optima/Soul Forte/Forte5/Stinger K900/Niro EV Rio Rio Rondo Sephia Soul EV Soul EV/K5 Spectra All Except EX/LX/SX/Spectra5 LEXUS All Models Except: IS300/350/500 LFA LS460/LS600h LINCOLN All Models Except: Continental LS/Zephyr MKS/MKZ MKZ Town Car LOTUS Elan 01-19 21 mm 65-80 17-22 21 mm 79-94 18-22 21 mm 79-94 19-20 21 mm 79-94 01-05 21 mm 65-87 18-22 21 mm 79-94 2017 21 mm 79-94 93-01 21 mm 65-87 15-19 21 mm 65-80 20-22 21 mm 79-94 00-04 21 mm 65-87 04-09 21 mm 65-80 90-22 21 mm 76 21-22 N/A Blue Grey Lt. Brown Grey Grey Grey Grey Grey Lt. Brown Blue Grey Grey Grey Grey Grey Lt. Brown Lt. Brown Lt. Brown Lt. Brown N/A Lt. Brown N/A N/A Lt. Brown Lt. Brown N/A Lt. Brown 103 2012 21 mm 81 07-17 21 mm 103 LC500/500h/LS500/500h 18-22 22 mm 103 90-03 21 mm 85-105 17-20 19 mm 162 00-06 19 mm 100 07-16 19 mm 100 17-20 19 mm 150 04-11 13/16" 100 90-92 17 mm 80 Elise/Evora/Evora GT/Exige 05-21 17 mm 76 Espirit 90-04 17 mm 72 LUCID Air MASERATI All Models 2022 N/A 111 90-91 19 mm 75 02-03 19 mm 90 04-05 19 mm 74 06-22 19 mm 72 03-12 17 mm 110 90-15 21 mm 65-87 14-22 21 mm 80-108 95-02 21 mm 65-94 16-22 21 mm 80-108 12-22 19 mm 96 2019 N/A 90-11 17 mm 81 A220/A250/A35 AMG 19-22 17 mm 96 AMG GT 2 Dr. AMG GT 4 Dr. B Class C Class/CLA CL CLS CLS450/CLS53 AMG E Class Except E Sedan & Wagon E Class EQS 450+/EQS 580 S/SD/SEC SL/SLC/SLR SLK Roadster SLS AMG SLS AMG MERCURY All Models Except: Capri Grand Marquis Marauder Milan/Montego Mystique Sable Tracer 16-21 17 mm 133 19-22 17 mm 111 13-19 17 mm 96 08-22 17 mm 96 98-14 17 mm 110 06-18 17 mm 96 19-22 17 mm 111 03-17 17 mm 96 2017 17 mm 111 18-22 17 mm 111 2022 17 mm 111 92-22 17 mm 111 03-20 17 mm 96 12-16 17 mm 96 11-12 17 mm 96 13-15 17 mm 133 90-05 19 mm 85-105 91-94 19 mm 67-88 04-11 19 mm 100 03-04 19 mm 95 05-11 13/16" 100 95-00 19 mm 94 08-09 19 mm 100 91-99 19 mm 65-87 Lt. Brown N/A Copper Copper Pink N/A N/A Grey Grey N/A Brown Red Red Red N/A Blue Grey Blue Blue N/A Lt. Brown N/A N/A N/A 479.4 Grey N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Grey Grey Grey Grey Brown Grey Grey Grey Legacy/Outback Legacy/Outback SVX WRX/WRX STI SUZUKI Aerio/Esteem/SX4 Forenza/Reno Kizashi Swift Swift+/Verona TESLA Model 3/Model S Roadster TOYOTA/SCION All Models Except: 86/FR-S Yaris Sedan/Yaris iA/iA GR 86 GR Supra Mirai VOLKSWAGEN All Models Except: Beetle Arteon/Beetle/Passat GTI/Golf R LIGHT TRUCKS / MINIVANS / SUVS NAME MINI Cooper (M12 bolt) Cooper (M14 bolt) MITSUBISHI All Models Except: 3000GT Eclipse Precis with aluminum wheels NISSAN All Models Except: Altima/Sentra/Versa GT-R All Except: Nismo LEAF LEAF Maxima/Micra OLDSMOBILE All Models PLYMOUTH Breeze Colt Colt Vista with aluminum wheels Laser Neon Prowler POLESTAR All Models PONTIAC All Models Except: Firefly G3 G8 LeMans Vibe 2017 19 mm 65-80 18-20 19 mm 79-94 21-22 19 mm 101-116 Wave/Wave5 PORSCHE All Models Except: 718 911 (Center lock) 911 Carrera (991 only) 911 Carrera/Boxster 911 (Center lock) 918 Spyder Carrera GT Cayman Panamera Panamera Panamera Taycan ROLLS ROYCE All Models Except: Park Ward/Silver Seraph All Models SAAB 9-2X 9-3/9-3X 9-5 9-5 900 900 900 with alloy wheels 9000 SATURN All Models Except: Astra L/LS/LW Series SMART Fortwo Fortwo Electric Drive Fortwo Fortwo Electric Drive SUBARU All Models Except: YEAR SIZE TORQUE (FT./LBS.) 02-07 17 mm 88 07-22 17 mm 103 90-22 21 mm 65-80 91-99 22 mm 87-101 90-96 23 mm 87-101 90-94 24 mm 51-58 90-94 25 mm 57-72 90-20 19 mm 80 07-22 19 mm 83 09-21 19 mm 97 15-21 19 mm 114 13-21 19 mm 83 2022 19 mm 90 09-22 19 mm 83 90-04 19 mm 100 96-00 19 mm 85-115 90-94 21 mm 65-80 90-94 21 mm 50-57 90-94 21 mm 65-80 90-94 19 mm 85-100 95-01 19 mm 85-115 97-01 19 mm 100 20-22 N/A 103 90-10 19 mm 100 2000 17 mm 45 09-10 22 mm 81 08-09 22 mm 125 90-93 19 mm 65 03-10 21 mm 76 05-08 19 mm 81 90-13 19 mm 96 17-22 17 mm 118 10-13 17 mm 370 2012 17 mm 118 13-22 17 mm 118 14-22 17 mm 444 2015 17 mm 480 04-06 17 mm 407 12-17 17 mm 118 10-11 17 mm 118 12-16 17 mm 133 17-22 17 mm 118 20-22 17 mm 118 COLOR N/A N/A Lt. Brown N/A N/A Lt. Brown Lt. Brown Blue Grey Grey N/A Grey Grey Grey Grey N/A Lt. Brown Lt. Brown Lt. Brown Grey N/A Grey N/A Grey Green Copper Aqua Yellow Lt. Brown Grey Grey N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 90-02 19 mm 45-50 Yellow Blue N/A 97-02 19 mm 74 04-22 19 mm 103 05-06 17 mm 72 99-11 17 mm 80 99-09 15 mm 80 10-11 17 mm 110 90-93 19 mm 80-90 1994 17 mm 78-96 95-98 17 mm 67-81 95-98 17 mm 78-96 90-98 17 mm 80-90 91-10 19 mm 100 08-09 19 mm 81 00-05 19 mm 92 05-15 17 mm 81 11-16 17 mm 81 16-18 17 mm 77 18-19 17 mm 77 Red Red N/A N/A Grey N/A N/A N/A N/A Grey Grey Grey N/A N/A Red Red 90-11 19 mm 58-72 Blue 12-22 19 mm 89 05-09 19 mm 74-89 10-22 19 mm 89 92-97 19 mm 74-89 11-14 19 mm 72 95-13 19 mm 62 04-08 19 mm 66-92 10-13 19 mm 104 90-01 19 mm 48 04-09 19 mm 81 12-22 21 mm 129 08-12 17 mm 77 90-22 21 mm 76 13-20 21 mm 89 16-20 13/16" 80-108 2022 N/A 89 20-22 19 mm 103 21-22 N/A 103 90-98 17 mm 81 99-22 17 mm 89 98-10 17 mm 89 12-22 17 mm 103 2022 N/A 103 VOLVO 240/740/760/780/940/960 90-97 19 mm 63 93-97 19 mm 81 850 *C30/C70/S40/V40/V50 98-10 21 mm 81 Lug nut with fixed washer 2010 19 mm 96 *C30/C70/S40/V50 S60/S80/S90 S70 S90/V90 V70 V60/V70/XC70/V90 11-13 19 mm 96 99-22 19 mm 103 98-00 19 mm 81 97-98 19 mm 63 98-00 19 mm 81 01-22 19 mm 103 *CAUTION: Refer to owner’s manual for additional wheel specific lug nut torque. LIGHT TRUCKS / MINIVANS / SUVS NAME YEAR SIZE TORQUE (FT./LBS.) ACURA All Models Except: MDX/ZDX MDX SLX ALFA ROMEO Stelvio ASTON MARTIN DBX AUDI All Models Except: e-tron 01-22 19 mm 80 07-13 19 mm 94 17-22 19 mm 94 96-99 19 mm 87 18-22 17 mm 89 21-22 N/A 129 09-22 19 mm 103 Q7/Q8/RS Q8/SQ7/SQ8 07-22 19 mm 118 19-22 N/A 120 COLOR Blue Grey Grey Grey N/A N/A N/A N/A N/A NAME BENTLEY Bentayga YEAR SIZE TORQUE (FT./LBS.) COLOR 17-22 17 mm 133/122* N/A *Torque to 133 in star pattern, loosen then retorque in star pattern to 122. BMW All Models Except: X1 BUICK All Models Except: Enclave Envision CADILLAC All Models Except: SRX SRX CHEVROLET/GMC Acadia/Traverse APV/Lumina APV Astro/Safari Astro/Safari Avalanche Blazer/Jimmy Blazer Blazer Jimmy Blazer/Jimmy Blazer Bolt EUV S10 Blazer S10 Blazer S15 Jimmy Except: S15 Jimmy 4x4 C/K 1500/2500/3500 C/K 3500 (DRW) C/K 1500/2500/3500 Captiva Sport City Express Colorado/Canyon Colorado/Canyon Equinox/Envoy Equinox/Terrain Equinox/Terrain Express/Savana Hummer EV Orlando R/V 3500 R/V 3500 (DRW) S Pickup/Sonoma S Pickup/Sonoma S Pickup/Sonoma SSR Silverado/Sierra R1500 Suburban V1500 Suburban with aluminum wheels R/V 2500 Suburban DRW Suburban/Yukon Suburban/Yukon Syclone Tahoe Tahoe Tracker Tracker Tracker Trailblazer Trax Typhoon Uplander/Venture CHRYSLER All Models All Models Except: Aspen Grey Grey Grey Grey Grey Yellow Grey N/A Yellow Yellow N/A Red Lt. Brown N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Yellow Grey N/A Grey Grey N/A Grey N/A Grey N/A DODGE Caravan/Grand Caravan Grand Caravan Dakota Dakota Dakota Durango Durango Durango Durango Durango SRT Journey Journey Nitro 00-22 17 mm 103 12-15 17 mm 88 02-22 22 mm 100 08-22 22 mm 140 19-22 22 mm 140 99-22 22 mm 140 04-09 19 mm 100 10-13 22 mm 110 07-22 22 mm 140 90-96 19 mm 100 90-02 19 mm 100 03-05 19 mm 140 02-13 22 mm 140 90-91 19 mm 88 N/A N/A Copper Aqua Aqua Aqua Grey Copper Aqua Grey Grey Aqua Aqua Grey 92-94 22 mm 120 White 95-97 13/16" 95 92-97 N/A 95 98-05 19 mm 100 100 N/A 19-22 19 mm 140 White 2022 N/A 90-91 19 mm 80 92-94 13/16" 95 90-91 19 mm 80 1991 19 mm 100 92-99 22 mm 140 96-00 1" 140 12-15 19 mm 100 15-18 13/16" 83 04-12 19 mm 100 15-22 22 mm 140 02-09 19 mm 100 10-17 22 mm 140 18-22 22 mm 100 96-22 22 mm 140 2022 N/A 140 12-14 19 mm 100 90-91 22 mm 140 90-91 19 mm 80 92-97 19 mm 95 98-04 19 mm 100 03-06 19 mm 100 99-22 22 mm 140 90-91 22 mm 100 90-91 22 mm 88 90-91 22 mm 100 90-91 22 mm 125 Aqua Blue Brown Blue Grey 90-95 22 mm 120 White Aqua N/A Grey N/A Grey Aqua Grey Aqua Copper Aqua N/A Grey 90-91 22 mm 120 White Aqua Blue Grey Grey Grey Aqua Copper Copper Copper 90-91 22 mm 120 White Aqua 92-95 22 mm 120 White Aqua 96-22 22 mm 140 1991 19 mm 100 96-22 22 mm 140 90-98 19 mm 60 99-02 19 mm 69 03-04 19 mm 73 02-22 19 mm 100 13-22 13/16" 100 92-93 19 mm 100 97-09 19 mm 100 12-22 19 mm 100 90-11 19 mm 95 07-09 22 mm 135 90-11 19 mm 95 12-20 13/16" Grey 1995 22 mm 120 White Aqua Blue Blue Yellow N/A Brown Grey Grey Grey Grey Aqua Grey 100 90-93 19 mm 85-110 94-04 19 mm 85-115 05-10 22 mm 135 98-03 N/A 04-09 N/A 11-13 N/A 85-115 135 110 14-22 19 mm 130 18-22 22 mm 110 09-13 19 mm 95 14-20 19 mm 100 07-11 19 mm 95 Power Ram 50/Ram 50 90-93 19 mm 87-101 Ram 1500 Ram 1500 Ram 1500 Ram 2500 Ram 2500 Ram 3500 Ram 3500 02-10 24 mm 135 Ram 3500 All Except: 3500 DRW B150/B250/B350 B350 HD B1500 B2500/B3500 B3500 HD B2500/B3500 Ram 1500 Van Ram 1500 Van Ram 2500/3500 Van Ramcharger FIAT 500X FORD Aerostar Bronco/Bronco Sport E-150 E-150 E-150 E-250/E-350 E-250/E-350 EcoSport Edge Edge Escape Excursion Expedition (19 mm hex) Expedition (21 mm hex) Explorer Explorer F-150 F-150 (19 mm hex) F-150 (21 mm hex) F-150 All Except: F-150 H.D. F-150 Heritage H.D. F-250 F-250 94-01 19 mm 80-110 02-08 22 mm 135 09-10 22 mm 130 Brown N/A Grey Aqua N/A N/A N/A N/A Copper Grey Grey Grey N/A N/A Aqua Aqua 94-01 24 mm 120-150 N/A N/A 94-01 24 mm 130-160 N/A N/A N/A N/A N/A 2002 19 mm 145 03-10 19 mm 135 03-10 19 mm 145 90-94 19 mm 85-110 90-94 19 mm 175-225 N/A N/A N/A 95-98 19 mm 80-110 95-97 19 mm 85-115 95-97 19 mm 175-225 N/A 1998 19 mm 120-150 N/A N/A N/A 99-01 19 mm 85-115 02-03 19 mm 80-110 99-03 19 mm 120-150 N/A N/A 90-93 19 mm 105 16-22 N/A 89 90-97 19 mm 100 90-22 19 mm 100 90-06 19 mm 100 2007 22 mm 140 N/A Grey Grey Grey Aqua 08-14 22 mm 140-150 N/A 90-07 22 mm 140 08-14 1-1/16" 140-150 N/A 18-22 13/16" 100 07-14 19 mm 100 15-22 22 mm 162 01-22 19 mm 100 00-05 13/16" 165 97-00 19 mm 100 00-22 21 mm 150 91-19 19 mm 100 20-22 21 mm 150 90-99 13/16” Aqua Brown Grey N/A Grey N/A Grey N/A Grey N/A 100 2000 19 mm 100 2000 21 mm 150 01-22 21 mm 150 01-03 21 mm 100 2004 21 mm 100 90-96 21 mm 140 97-99 21 mm 100 Brown Grey N/A N/A N/A N/A N/A N/A Brown Grey NAME FORD (CONT.) F-250 H.D. F-350 YEAR SIZE TORQUE (FT./LBS.) 1997 21 mm 140 90-97 21 mm 140 COLOR N/A N/A F-250/F-350 Super Duty 99-04 21 mm 150-165 N/A F-250/F-350 Super Duty 05-08 21 mm 150 F-250/F-350 Super Duty 09-19 21 mm 165 F-250/F-350 Super Duty 20-22 21 mm 150 N/A N/A N/A Flex/Freestar Maverick Mustang Mach-E Police Interceptor Utility Ranger Taurus X Transit Connect Transit Connect Transit Connect Transit Connect Transit Windstar GENESIS GV80 HONDA All Models Except: Odyssey/Ridgeline Passport with aluminum wheels Passport Pilot HUMMER H1 H1 (1-piece steel wheel) H2 H3/H3T HYUNDAI All Models All Models INFINITI All Models Except: QX30 JX35/QX60 QX50/QX55 QX4/QX56/QX80 ISUZU Amigo Amigo Ascender Axiom Hombre Oasis Pickup Rodeo Trooper Trooper VehiCROSS VehiCROSS 04-19 13/16" 2022 N/A 21-22 N/A 100 148 150 13-14 19 mm 110 90-22 19 mm 100 08-09 19 mm 100 10-11 19 mm 66 2011 19 mm 100 12-18 19 mm 100 19-22 21 mm 150 15-22 13/16" 150 95-03 19 mm 100 21-22 N/A 101-116 95-22 19 mm 80 05-22 22 mm 94 94-02 21 mm 65 94-02 21 mm 87 19-22 22 mm 94 09-22 22 mm 94 92-06 22 mm 110 94-00 22 mm 140 03-09 22 mm 140 06-10 19 mm 100 01-17 21 mm 65-80 Brown N/A N/A N/A Grey Grey Blue Grey Grey N/A N/A Grey N/A Blue Copper Lt. Brown N/A Copper Copper Copper Aqua Aqua Grey Lt. Brown 18-22 13/16" 79-94 Brown 03-17 21 mm 80 17-19 21 mm 96 13-22 21 mm 83 19-22 21 mm 83 97-22 21 mm 98 Lt. Brown N/A N/A N/A N/A 90-94 19 mm 58-87* Brown Brown Grey Grey Lt. Brown Grey 90-95 19 mm 58-87* 91-04 21 mm 65** 90-92 19 mm 58-87 93-02 19 mm 87 99-00 21 mm 65** 2001 21 mm 87 i-280/i-290/i-350/i-370 06-08 19 mm 100 with aluminum wheels with aluminum wheels JAGUAR E-Pace F-Pace F-Pace I-Pace I-Pace JEEP Cherokee/Wagoneer 18-22 19 mm 98 17-18 19 mm 103 19-22 19 mm 98 2019 19 mm 92 20-22 19 mm 98 1990 13/16" 75 Cherokee/Grand Cherokee 91-93 13/16" 85-110 Cherokee Cherokee Comanche Commander Compass/Patriot Gladiator Grand Cherokee Grand Cherokee Grand Cherokee Grand Cherokee Except: SRT Models Grand Wagoneer Grand Wagoneer 94-01 13/16" 85-115 14-22 19 mm 100 90-92 13/16" 75 06-10 19 mm 95 07-22 13/16" 100 20-22 22 mm 130 94-04 13/16" 85-115 05-10 13/16" 95 11-13 22 mm 110 14-22 22 mm 130 15-21 19 mm 110 90-91 13/16" 75 Grand Wagoneer/Wagoneer 2022 N/A Liberty Liberty Renegade with steel wheels Wrangler Wrangler/TJ Wrangler/TJ Wrangler/JK Wrangler/JL KIA All Models Except: 1993 13/16" 85-110 130 00-04 13/16" 85-110 05-12 13/16" 95 15-22 17 mm 89 2015 19 mm 63 90-91 19 mm 80 92-04 19 mm 85-110 05-13 19 mm 95 14-18 19 mm 100 18-22 19 mm 130 02-18 21 mm 65-80 Carnival/EV6/Niro/Sportage 17-22 21 mm 79-94 Sedona Sedona Seltos/Sorento/Telluride Sorento Sportage LAND ROVER Defender/Discovery Defender/Discovery Discovery Sport Freelander LR2 LR3 LR4 Range Rover Range Rover SE Range Rover Range Rover Except: Evoque Sport Range Rover Range Rover/Sport Range Rover/Velar LEXUS All Models Except: GX460/GX470 LX470/LX570 LINCOLN Aviator Aviator Blackwood Corsair MKC/MKT MKX MKX Mark LT Nautilus Navigator (19 mm hex) Navigator (21 mm hex) 04-05 21 mm 80-101 19-21 21 mm 79-94 19-22 21 mm 79-94 03-09 21 mm 65-87 95-02 21 mm 65-87 80-94 87 Grey Lt. Brown Grey Grey Lt. Brown N/A Grey N/A N/A N/A N/A N/A N/A N/A Grey N/A N/A Grey Brown Grey Brown Aqua N/A Brown Copper Aqua N/A Brown N/A N/A N/A Brown N/A Yellow Blue N/A Grey Grey N/A Lt. Brown N/A N/A N/A N/A N/A N/A 93-98 22 mm 90-95 Copper N/A 99-22 19 mm 103 15-22 19 mm 98 02-05 22 mm 84 08-15 21 mm 98 05-09 22 mm 103 10-16 22 mm 98 95-01 22 mm 84 96-02 22 mm 84 03-12 22 mm 103 12-22 22 mm 98 11-18 22 mm 98 13-18 22 mm 98 19-22 22 mm 103 18-22 22 mm 98 96-22 21 mm 76 03-14 22 mm 83 98-22 22 mm 97 NX250/350/350h/450h+ 2022 N/A 103 03-05 19 mm 100 20-22 22 mm 150 2002 22 mm 150 20-22 19 mm 100 07-19 19 mm 100 07-15 22 mm 100 16-18 22 mm 162 06-08 19 mm 150 19-22 19 mm 162 98-00 19 mm 100 00-22 21 mm 150 Grey Copper Grey Copper Copper 90-95 22 mm 90-95 Copper Copper Copper Copper Copper Copper Copper Copper Copper Lt. Brown Copper Copper N/A Grey Pink N/A Grey Grey Copper N/A N/A N/A Grey N/A NAME MASERATI Levante MAZDA B2200/B2600 YEAR SIZE TORQUE (FT./LBS.) 17-22 19 mm 72 90-93 21 mm 65-87* B2300/B3000/B4000 94-10 21 mm 100* B2500 98-01 21 mm 100 CX-3/CX-30/CX-5/CX-9 07-22 19 mm 80-108 CX-7 MPV MPV MX-30 EV Mazda5 Navajo Tribute with chrome steel wheels MERCEDES-BENZ All Models Except: 07-12 21 mm 65-87 90-98 21 mm 66-86 00-06 21 mm 79-108 2022 21 mm 80-108 06-17 21 mm 65-87 91-94 21 mm 100 01-11 21 mm 100 N/A 87-108 98-22 17 mm 110 G/GLA/GLB/GLC Except: 02-22 17 mm 96 G550/G63 AMG 19-21 17 mm 111 GLC300/350e/43 & 63 AMG 18-22 17 mm 111 Metris (Alloy wheels) Metris (Steel wheels) Sprinter (Alloy wheels) Sprinter (Steel wheels) MERCURY All Models Except: Villager MITSUBISHI Eclipse Cross Endeavor Mighty Max/Van Montero Montero Sport with steel wheels Outlander PHEV/Sport/RVR Outlander Raider NISSAN All Pickups Except: DRW Titan XD All SUV/Vans Except: Armada/Xterra 98-00 19 mm 87 03-08 19 mm 100 02-04 19 mm 97 96-00 21 mm 95 96-99 19 mm 80 Kicks/Murano NV200 NV1500/NV2500/NV3500 NV1500/NV2500/NV3500 Pathfinder Pathfinder Quest Rogue 16-22 17 mm 133 16-22 17 mm 147 03-22 17 mm 133 03-22 17 mm 177 97-11 19 mm 100 93-02 21 mm 80 18-22 21 mm 65-80 04-11 21 mm 65-80 90-96 21 mm 87-101 90-06 21 mm 72-87 97-99 13/16" 87-101 11-22 21 mm 65-80 2022 N/A 83 COLOR Blue N/A N/A N/A N/A Lt. Brown Lt. Brown N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Grey Lt. Brown Lt. Brown Lt. Brown N/A N/A 97-04 13/16" 72-87 Brown N/A N/A N/A 06-09 22 mm 125-145 Aqua 90-22 21 mm 98 16-22 21 mm 131 93-22 21 mm 80 00-22 21 mm 98 15-22 21 mm 83 13-21 21 mm 83 12-14 21 mm 138 15-21 21 mm 131 90-12 21 mm 98 13-22 21 mm 83 04-09 21 mm 83 14-22 21 mm 83 Rogue Select/Rogue Sport 14-22 21 mm 80 Van 90-91 21 mm 98 OLDSMOBILE/PONTIAC All Models PLYMOUTH All Models PORSCHE All Models RAM 1500 1500 H.D. 2500/3500 2500/3500 3500 (DRW) C/V C/V Dakota ProMaster ProMaster City with steel wheels RIVIAN R1T ROLLS-ROYCE Cullinan SAAB 9-4X 9-7X SATURN Outlook Relay/Vue SUBARU Ascent B9 Tribeca/Tribeca Tribeca Baja Baja Forester Forester Forester/Crosstrek 90-09 19 mm 100 90-00 19 mm 85-115 03-22 19 mm 118 11-22 22 mm 130 2012 22 mm 135 12-22 22 mm 130 2011 22 mm 135 2011 22 mm 145 2012 19 mm 95 13-15 19 mm 100 2011 22 mm 135 14-22 21 mm 145 15-22 21 mm 89 15-22 21 mm 63 2022 N/A 19-22 N/A 140 103 2011 22 mm 110 05-09 19 mm 100 07-10 22 mm 140 02-10 19 mm 100 19-22 19 mm 89 06-10 19 mm 74-89* 11-14 19 mm 89* 03-04 19 mm 66-81 05-06 19 mm 74-89 98-10 19 mm 58-72 11-13 19 mm 72 14-22 19 mm 89 N/A 90-91 21 mm 166-203 N/A N/A Lt. Brown N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Grey N/A N/A Aqua Aqua Aqua N/A N/A Grey Grey Aqua N/A N/A Lt. Brown N/A N/A Copper Grey Aqua Grey Grey Grey Grey Grey Grey Yellow Blue Grey *See owner's manual for accessory chrome wheel torque information SUZUKI Equator Grand Vitara Grand Vitara Samurai Samurai Sidekick Vitara Vitara X-90 XL-7 XL-7 TESLA Model X/Model Y TOYOTA All Models Except: 4Runner FJ Cruiser Land Cruiser Land Cruiser with aluminum wheels Land Cruiser Pickup 4x2 Pickup 4x4 Sequoia Sequoia Tacoma Tundra Tundra with steel wheels 09-12 13/16" 98 99-00 13/16" 69 01-13 13/16" 73 90-91 19 mm 37-57 Brown Brown Brown N/A 92-95 19 mm 58-79 Blue 90-98 19 mm 58-79 Blue 99-00 13/16" 69 01-04 13/16" 73 96-98 19 mm 69 02-06 13/16" 73 07-09 19 mm 100 16-22 21 mm 129 90-22 21 mm 76 96-14 21 mm 81 07-14 21 mm 83 94-97 22 mm 108 94-97 22 mm 76 98-21 22 mm 97 90-95 22 mm 101 90-95 22 mm 76 01-07 22 mm 83 08-22 22 mm 97 95-22 21 mm 83 00-06 21 mm 83 07-22 22 mm 97 07-22 22 mm 154 VOLKSWAGEN Atlas/Atlas Cross Sport/ID.4 18-22 17 mm 88 EuroVan EuroVan Routan Tiguan Tiguan 4Motion Touareg Touareg Vanagon VOLVO All Models 93-96 17 mm 118 97-03 17 mm 133 09-14 17 mm 85-115 09-22 17 mm 103 09-18 17 mm 88 04-07 19 mm 118 08-17 19 mm 133 90-91 17 mm 123 03-22 19 mm 103 N/A Lt. Brown N/A N/A 90-93 22 mm 116 White White Copper Copper Copper Copper Copper Copper N/A N/A Copper Pink N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Brown Brown Blue Brown Grey • +/-4% accuracy • Non coil-spring mechanism, no need to return to zero after use, which results in longer tool life • Knob-type torque adjustment for faster and energy saving efficiency • Torque setting easily read through the window scale • TPR cushion handle is oil resistant, the handle provides comfort and ease of control • Loud click sound and strong impulse when required torque is reached EASY-TOREAD TORQUE SETTING CRISS CROSS GUIDE ONLY TIGHTEN THE NUTS FOLLOWING THE GUIDE SHOWN. FAILURE TO TIGHTEN NUTS IN THE CRISS-CROSS SEQUENCE WILL CAUSE MISALIGNMENT OF THE WHEEL. CONTINUE THIS PROCESS UNTIL ALL OF THE NUTS ARE TIGHTENED TO THE PROPER SPECIFICATIONS. 121780M 121965M 121980M 121910M 122610 PART NUMBERS SIZE 121755M 1/2” DRIVE TORQUE LIMITING SOCKETS COLOR TORQUE (FT./LBS.) 17 mm 17 mm 55 80 19 mm (3/4”) 65 19 mm (3/4”) 80 19 mm (3/4”) 13/16” Green Red Yellow Blue 100 100 Grey Brown PART NUMBERS SIZE 122810M 122110M 12212M 12214M 123014 122115M 21 mm 22 mm 80 110 22 mm (7/8”) 120 22 mm (7/8”) 140 15/16” 22 mm WARNINGS TORQUE (FT./LBS.) COLOR Lt. Brown Copper White Aqua 140 154 Lt. Green Pink • Only those instructed in the safe and proper use of Torque Sockets and Extension Bars should use them. • Actual line pressure should be 90 to 100 psi and output of the air impact gun: Automotive 1/2” Dr. - 150 to 250 ft. lbs., Medium Duty Truck 3/4” Dr. - 360 to 590 ft. lbs., Heavy Duty Truck 3/4” and 1” Dr. - 650 to 1,000 ft. lbs. • Always wear safety goggles when using torque sockets and extension bars. • Never hold with hands while tightening. • Do not lubricate lug nut threads before torquing. • Improper torque can cause distortion, alignment problems and fatigue cracks. Once you have acquired the correct torque, any excess torque will be absorbed by the torque extensions. Do not re-torque once specified torque is reached. • Check all parts, including wheels, studs and mounting faces of hub and wheels for dirt, rust or damage. • Replace damaged parts immediately. • DO NOT USE FOR REMOVAL OF LUG NUTS. Every effort has been made to accurately compile the information on this chart from a reliable third party source. The publisher makes no representations or warranties with respect to the accuracy of the information contained on this chart. The information compiled is subject to change by the manufacturers without notice or may not be listed. Refer to the vehicles’ placard and owner’s manual if there is any doubt. 1 68020 22050 8 168-02022 | Lug Nut Torque Chart 2022 168-02022 ASCOT NO. MFG. NO. DESCRIPTION 168-02022 ASCOT NO. MFG. NO. 168-00250 250-SB 168-00600 TC2022 Lug Nut Torque Application Chart 600-SB LONGER TOOL LIFE POSTER SIZE 1/4" DRIVE TORQUE WRENCH • Easy-to-read and set for error-free adjustments • Automatic locking torque adjustment • Ideal for TPMS applications • Blow molded case • RANGE: 10-150 in./lbs. EASY-TOREAD TORQUE SETTING ASCOT NO. 168-00652 MFG. NO. DESCRIPTION AS-652H 1/4" Drive Torque Wrench SPLIT BEAM TORQUE WRENCHES DESCRIPTION 1/2" Drive 250 ft./lb. Split Beam Torque Wrench 3/4" Drive 600 ft./lb. Split Beam Torque Wrench FLEX HINGE STYLE TORQUE WRENCH 1/2" DRIVE TORQUE WRENCH • Dual direction • Locking collar prevents accidental setting adjustment • Easy-to-read laser marked scale • Blow molded case with calibration certificate • RANGE: 25-250 ft./lb. • OVERALL LENGTH: 25" ASCOT NO. 168-00425 MFG. NO. DESCRIPTION AS-425 1/2" Drive Torque Wrench • Robust construction • ACCURATE RESULTS: ±4% • Adjustable torque settings • DUAL SCALED: ft./lb. and N.m • The large break angle improves accuracy by reducing the possibility of over-torquing • Cam control of the mechanism gives a controlled break • Every wrench supplied with a calibration certificate • Durable storage case • 2 ADAPTERS INCLUDED: 3/4" to 1", 3/4" to 3/4" ASCOT NO. MFG. NO. 168-60011 60011 DESCRIPTION 600 ft./lb. Flex Hinge Style Torque Wrench BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS 168-00425 168-00250 168-00600 168-60011 168-00652

WHEEL SERVICE PRODUCTS 1" DRIVE TRUCK TORQUE EXTENSIONS • 1" drive square ends • Once the proper torque is reached the extension will absorb any excess torque ASCOT NO. 495-16004 495-16005 495-16006 495-16007 495-16008 495-16009 A B C D E F ITEM MFG. NO. DESCRIPTION 1600-P 1600-R 1600-S 1600-T A B C D E F 1600-Y 1" Drive 475 ft./lb. Torque Limiting Extension 1" Drive 250 ft./lb. Torque Limiting Extension 1" Drive 350 ft./lb. Torque Limiting Extension 1" Drive 175 ft./lb. Torque Limiting Extension 1600-W 1" Drive 650 ft./lb. Torque Limiting Extension 1" Drive 550 ft./lb. Torque Limiting Extension 1/2" DR 3-PIECE IMPACT TORQUE SOCKET SET • Thicker design provides superior strength and durability • Prevents risk of nut damage • Weight is reduced by 20% • Torque design extends product’s service life • Protects wheel rim from abrasion 167-01721 ASCOT NO. 167-01721 MFG. NO. DESCRIPTION ITS3 1/2" DR 3-Piece Impact Torque Socket Set 1/2" DR 5-PIECE TORQUE EXTENSION SET • Set includes all 5 extension sockets listed below • Provides the ability t torque wheel nuts on passenger cars to the c specification • Set comes in a durable plas molded case • Individual extensions sold separ 168-12450 168-12080 168-12100 168-12120 168-12140 163-91217 163-91219 163-91221 163-91234 163-91236 163-91278 169-12006 ASCOT NO. ASCOT NO. 168-12450 MFG. NO. DESCRIPTION 2450 ASCOT NO. MFG. NO. 168-12465 168-12480 168-12410 168-12412 168-12414 2465 2480 1/2" DR 5-Piece Torque Extension Set DESCRIPTION 1/2" DR 5-PIECE TORQUE EXTENSION SET: KIT CONTENTS 65 ft./lb. Extension - Yellow 24100 24120 24140 80 ft./lb. Extension - Blue 100 ft./lb. Extension - Gray 120 ft./lb. Extension - White 140 ft./lb. Extension - Aqua 168-12065 168-12080 168-12100 168-12120 168-12140 163-91217 163-91219 163-91221 163-91234 163-91236 163-91278 168-12106 168-12250 169-12006 168-96509 ASCOT NO. MFG. NO. 168-13000 13000 168-16000 16000 DESCRIP 4-Piece Preset Wheel Torque Wrench Set 6-Piece Preset/Adjustable (5 Preset - 1 Adjustable) Wheel Torque Wrench Set ASCOT NO. DESCRIPTION ASCOT 4-PIECE KIT CONTENTS 80 ft./lb. Preset Torque Wrench - Blue 100 ft./lb. Preset Torque Wrench - Gray 120 ft./lb. Preset Torque Wrench - White 140 ft./lb. Preset Torque Wrench - Aqua 1/2" Dr. x 17mm Chrome Socket 1/2" Dr. x 19mm Chrome Socket 1/2" Dr. x 21mm Chrome Socket 1/2" Dr. x 3/4" Chrome Socket 1/2" Dr. x 13/16" Chrome Socket 1/2" Dr. x 7/8" Chrome Socket Wall Board DESCRIPTION ASCOT 6-PIECE KIT CONTENTS 65 ft./lb. Preset Torque Wrench - Yellow 80 ft./lb. Preset Torque Wrench - Blue 100 ft./lb. Preset Torque Wrench - Gray 120 ft./lb. Preset Torque Wrench - White 140 ft./lb. Preset Torque Wrench - Aqua 1/2" Dr. x 17mm Chrome Socket 1/2" Dr. x 19mm Chrome Socket 1/2" Dr. x 21mm Chrome Socket 1/2" Dr. x 3/4" Chrome Socket 1/2" Dr. x 13/16" Chrome Socket 1/2" Dr. x 7/8" Chrome Socket 1/2" Dr. x 6" Chrome Extension 250 ft./lb. Single Direction Micro-Adjustable Torque Wrench Wall Board 1/2" Preset Torque Wrench Repair Kit ASCOT 4 & 6-PIECE WHEEL TORQUE WRENCH SET • One-way, not bi-directional • +/- 4% accuracy • Cushioned ratchet head • Color coded presets 81 6-PIECE SET SHOWN IN IMAGE WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS

82 WHEEL SERVICE PRODUCTS Torque Wrenches & Accessories (cont.) 1" BLUE TORK • Two pneumatic motors for rundown and final tightening • Preset and adjustable shut off for torque control • ERGONOMICS: Very low noise level, virtually no vibration • EFFICIENCY: Precise and accurate tightening, less fatigued operators • ENVIRONMENT IMPROVEMENTS: by increasing durability of the tools, we reduce waste • QUALITY: Precise, accurate tightening to the manufacturer’s recommended torque and angle specifications • MAXIMUM TORQUE: 660 ft./lb. PRESET TRUCK CLICKER STYLE TORQUE WRENCH TWO PNEUMATIC MOTOR • Preset at 475 ft./lb. • Designed for fleet applications • Mas 4-1/2' length for high tor applications • Supplied with handy storage bag for sockets and e • Both the wrench and the bag ha reflective strips for safe high LOW NOISE MASSIVE 4-1/2' LENGTH ASCOT NO. MFG. NO. 168-47501 1-475 168-96111 Training required prior to use. 168-07600 9610-0111RK 168-47501 FOR FLEET APPLICATIONS DESCRIPTION 1" Drive x 475 ft./lb. Preset Torque Wrench 1" Torque Wrench Repair Kit ASCOT NO. MFG. NO. 168-07600 168-07602 168-07603 DESCRIPTION 168CP-7600xB CP-7600xB-R Non-Reversible Single Torque Preset Reversible Single Torque Preset CP-7600xB-R4P Reversible 4 Torque Preset Selector FRL UNIT FOR BLUE TORK • INCLUDES: Industrial grade filter; Regulator; Single point lubricator; 25' hose with capillary tube; 1 Quart of special tool oil approved for the Blue Tork ASCOT NO. MFG. NO. 117-58625 DESCRIPTION 586-254-1000 FRL Unit for Blue Tork 117-58625 MICRO-ADJUSTABLE TORQUE WRENCH • Dual scale, calibrated dual dir lock with spring loaded pull do accurate and easy to set • Eas scale • Ergonomic comfort Release buttons which pro as well as easy socket remo ft./lb. • ACCURACY: ± 4% clock indicated value, CW, from 20% t ASCOT NO. MFG. NO. 168-12250 2503MFRRH 1/2" Drive Micro-Adjustable Torque Wrench DUAL SCALE BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS 83 PRESET VALVE NUT TORQUE WRENCHES • Wrench flexes when proper torque setting is reached • Prevents overtightening of the valve grommet • Cushioned handle • Sizes and preset torque settings laser etched on shaft • +/- 4% accuracy ASCOT NO. MFG. NO. 168-00058 168-00916 DESCRIPTION NSPTW58 5/8" Preset Torque Wrench for TR540-550 Series Valve Hex Nuts NSPTW916 9/16" Preset Torque Wrench for TR570 Series Valve Hex Nuts 168-00916 FLEX HINGE STYLE TORQUE WRENCH • Robust construction • ACCURATE RESULTS: +/-4% • Adjustable torque settings • DUAL SCALED: ft./lb. and NM • The large break angle improves accuracy by reducing the possibility of over torquing • Cam control of the mechanism gives a controlled break • Every wrench supplied with a calibr certificate • Durable storage case 2 ADAPTERS INCLUDED: 3/4" to 1", 3/4" to 3/4" TORQUE FIN TORQUE WRENCH STABILIZER • Links with, stabilizes, and properly aligns manual torque wrenches to ensure accurate torque • Saves time and money • Easy to use • Reduces risk of injury and liability due to wheel-off accidents • Works with most commercial torque wrenches and truck tires • Durable and lightweight DURABLE AND PORTABLE 168-67510 TORQIT BATTERY-POWERED TORQUE WRENCH 168-00058 • Durable and Portable Precision Torque • Four models from 120 ft./ lb. to 3,000 ft./lb. • LITHIUM ION 8.0 AH RECHARGEABLE BATTERY: Full charge in under 60 minutes • Every Unit Calibrated In ISO17025 Laboratory • 13-Month Warranty from date of purchase • MADE IN THE USA ASCOT NO. MFG. NO. DESCRIPTION 168-67510 67510 TorqIt Battery-Powered Torque Wrench 168-600 168-60020 ASCOT NO. MFG. NO. 168-60011 168-60020 168-60025 169-02013 169-03013 169-13413 60011 12299 12297 2013E 3013E 13413E DESCRIPTION DURABLE AND 600 ft./lb. Flex Hinge Style Torque 1" Square Drive for Flex Hinge Torque Wrench 3/4" Square Drive for Flex Hinge Torque Wrench 3/4" Drive x 13" Impact Extension 1" Drive x 13" Impact Extension 3/4" Drive x 1" Drive x 13" Impact Extension LIGHT IN WEIGHT ASCOT NO. MFG. NO. DESCRIPTION 168-67250 67250 Torque Fin Torque Wrench Stabilizer WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS

84 WHEEL SERVICE PRODUCTS Torque Wrenches & Accessories (cont.) INDUSTRIAL TORQUE WRENCH • Norbar's New Industrial Torque Wrench • SPLIT DESIGN: Allows for easy, behind-the-seat storage in service vehicles • SMALLER CARRYING CASE: Easy to transport, and less expensive to ship back-and-forth for calibration and service • Removal of calibrated nuts means less expensive to calibrate • Adjusting scale in the handle is large and easy to read • Calibration is as easy as replacing the paper scale with a new paper scale • Ratchets are no longer a welded component, making them replaceable when worn or damaged - this means fewer wrenches scrapped • Operator handle designed to ‘guide’ the technicians hand into the proper position PNEUMATIC TORQUE MULTIPLIER • OPERATING RANGE: 147 to 738 ft./lb. (200 to 1000 Nm) • ‘Soft Start’ trigger control aids socket location, and allows gradual and safe reaction location • Extended reaction is ideal for reaching recessed nuts • FAST: 1000 Nm version has a free speed of 140 rpm for rapid bolt run-down • For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator • Light weight for ease of handling • NON IMPACTING: Low vibration levels make these tools comfortable and safe to use • On Bi-Directional tools, the direction control knob is locked while the tool is running to prevent accidental damage to the gearbox • QUIET: Less than 85 dB(A) when under load • Square drive is quickly and easily replaceable 168-18141 Norbar's Industrial Torque Wrench in use. ASCOT NO. MFG. NO. 168-18141 FOR INDUSTRIAL USE SPLIT DESIGN DESCRIPTION PTME-72-2000-B 1" Square Drive Bi-Directional Pneumatic Multiplier NORBAR TRUCHECK2 168-43528 • Allows torque tool performance to be monitored and tools kept in peak condition • Limited settable options, Ideal for non-expert users with click type torque wrenches 168-42760 ASCOT NO. MFG. NO. 168-42760 168-42761 168-57600 168-57601 120110 120110.01 120115 120115.01 DESCRIPTION 4AR-N, 3/4" Drive, 150–600 ft./lb. Range 4AR-N, 1" Drive, 150–600 ft./lb. Range 5R-N, 3/4" Drive, 200–750 ft./lb. Range 5R-N, 1" Drive, 200–750 ft./lb. Range • Inbuilt Micro USB 2.0 port enables power from any USB power source • Software can be updated remotely, without the need to return the product to Norbar • Supplied with traceable calibration certificate in clockwise direction. A counter-clockwise calibration is available at additional cost ASCOT NO. MFG. NO. 168-43528 43528 DESCRIPTION Norbar TRUCHECK2 Torque Wrench Checker BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS MADE IN THE USA MICROMETER TORQUE WRENCHES • EXTREMELY ACCURATE: Within 3% of reading from 20% of full scale to full scale clockwise and counter-clockwise • EXCLUSIVE PATENTED CALIBRATION MECHANISM: This patented mechanism allows for calibration in both the clockwise and counter-clockwise directions, plus with regard to spring rate, without the disassembly of the wrench. This protects against contamination of the working mechanism, and make calibration quick and easy • EXCLUSIVE PATENTED ROLLER-RELEASE: This patented feature removes over 95% of the friction inherent in other click wrenches thereby extending life and providing for more reliable operation. • ALL “M” SERIES MEETS OR EXCEEDS ALL APPLICABLE REQUIREMENTS OF: ANSI / ASME B107.14M, GGG-W-00686C, BS6073: 1988, ISO6789 ASCOT NO. MFG. NO. 168-01200 168-02101 168-03252 DESCRIPTION M1R200H 1/4" Drive 3/8" Drive 1/2" Drive M2R100F M3R250F SPLIT-BEAM CLICK TORQUE WRENCHES • EXTREMELY ACCURATE: within 4% of reading from 20% of full scale to full scale • Setting torque on adjustable wrenches is fast and easy because there is no spring tension on the adjustment knob • Torque setting locks on adjustable wrenches for repetitive applications • Wrench length designed to provide the leverage required for maximum torque applications. Also provides the needed reach for those hard to get at places ASCOT NO. MFG. NO. 168-02100 168-03250 168-03251 168-04400 168-05600 C2FR100F C3FR250F CP3FR250F C4D600F C5D600F DESCRIPTION FT./LB. 3/8" Drive 1/2" Drive 1/2" Preset 3/4" Drive 1" Drive 100 250 250 600 600 EXTREMELY ACCURATE MADE IN THE USA 85 QUALITY AND INNOVATION SINCE 1908 MICROMETER TORQUE WRENCH • Range is 25 to 250 ft./lb. • HEAVY DUTY RATCHET: Fewer and stronger teeth • UNIDIRECTIONAL TORQUEING: Tightens in right hand direction only, does not tighten in left hand direction for improved performance • ERGONOMICALLY DESIGNED HANDLE MADE FROM MODIFIED SILICONE: Tear resistant, oil and solvent resistant • Protective head cover made from modified silicone • Comes in plastic storage case • MADE IN USA ASCOT NO. MFG. NO. 168-97354 97354A DESCRIPTION Micrometer Torque Wrench: 25-250 ft./lb. MICROMETER TORQUE WRENCHES • Push-through ratchet instead of a reversible ratchet • Asymmetric design of clicker and ratchet mechanism creates a more robust construction and durable wrench • Improved lock collar design is easier to grip • ACCURACY: +/- 4% in both directions and improves impact resistance • MADE IN USA ASCOT NO. 495-97353 495-97355 495-97362 495-97352 495-97351 495-97361 MFG. NO. CEN97353A CEN97355A CEN97362 CEN97352A CEN97351A CEN97361B RANGE (INCREMENT) 30-250 ft./lb. 100-600 ft./lb. 30-150 ft./lb. 20-100 ft./lb. 20-250 in./lb. 20-200 in./lb. DRIVE 1/2" push-through drive 3/4" push-through drive 1/2" flex head push-through drive 3/8" flex head push-through drive 3/8" push-through drive 1/4" push-through drive MADE IN THE USA WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS

WHAT IS TORQUE? Torque is the measurement of twisting force that is applied to a lug nut to create bolt tension. EL SERR EL SERR QUALITY AND INNOVATION SINCE 1908 TORQUE MULTIPLIERS R I S T TORQUE SPECIFICATIONS Hub-Pilot Wheel: 450-500 ft/lbs. oiled | Stud-Pilot Wheel: 450-500 ft/lbs. dry | Demountable Rim: 200-260 ft/lbs. dry TIA is the industry leader in commercial truck tire and wheel service education. Since Occupational Safety and Health Administration (OSHA) Regulation 29 CFR 1910.177 requires training for all employees that service truck tires, fleets must make sure that every technician who installs, removes or handles truck tires in any way has compliant training. TIA developed the Fleet Tire Service OSHA Compliance Program so the trucking industry could provide in-house technician training that exceeds the minimum requirements established by 29 CFR 1910.177. For more information on TIA training or the RIST procedure, visit TIA’s website: http://www.tireindustry.org/training.asp or call 800-876-8376, ext. 106. 495-96353 495-96355 495-96361 495-96395 96353 96355 96361 96395 25-250 In.-lbs. (1 In.-lbs.) 100-600 In.-lbs. (5 In.-lbs.) 20-200 In.-lbs. ( 1 In.-lbs.) 10-80 In.-lbs. (In.-lbs. ) 1/2" Ratchet 3/4" Ratchet 1/4" Ratchet 3/8" Flexhead 17.6 inches 0.5 1.5 2.2 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION EL SERRVICE PRODUCTS VICE PRODUCTS 89 20.0 inches 38.5 inches 12.4 inches 2 stands for snug the lug nuts in a star pattern stands for remove debris from mating surfaces stands for inspect all of the components WHEEL TORQUE PRODUCTS // WHEEL SERVICE PRODUCTS 89  Torque Sockets, Torque Limiting Socket Set WHEEL SERVICE PRODUCTS WHAT IS CLAMPING FORCE? Clamping force is the result of bolt tension and it is the physical property that holds the wheels on the vehicle. DOES THE CORRECT TORQUE GUARANTEE THE CORRECT CLAMPING FORCE? No. Clamping force cannot be measured in the field, so technicians must use the correct torque to approximate the amount of clamping force. Since there are a number of factors that determine how much clamping force is generated per foot pound of torque, technicians should always follow the RIST procedure developed by the Tire Industry Association (TIA). stands for torque the fasteners to specification ASCOT SUPPLY CORPORATION BUYER'S GUIDE ® WHEEL SERVICE PRODUCTS // WHEEL TORQUE PRODUCTS WHEEL SERVICE PRODUCTS Call for availability on complete TIA torque procedures

WHEEL SERVICE PRODUCTS Loose Nut Prevention CHECKPOINT LOOSE LUG NUT INDICATORS* • A simple and cost-effective solution that helps prevent a catastrophic loss caused by loose lug nuts when used as part of a total torque program • When fitted on properly torqued lug nuts and inspected by a driver or technician, CHECKPOINT clearly and visually indicates if the wheel nuts have moved • If the arrows have moved from the point-topoint or daisy-chain pattern, this indicates that they have loosened and need attention • Facilitates the driver’s check for lug nut movement • Early warning for mechanic or driver of excessive heat caused by possible brake or bearing problems; designed to melt in excessive heat • Demonstrates fleet’s commitment to vehicle road worthiness and safety to the public 2X THE TEETH SIMPLE & EASY TO USE 402-20019 402-20020 402-20021 402-20078 402-20023 402-20024 402-20001 402-20026 402-20027 402-20028 402-20029 402-20030 402-20114 402-20032 402-20033 402-20034 402-20035 402-20036 402-20015 The CHECKPOINT Loose Lug Nut Indicators in use. 402-20040 402-20041 402-20044 402-20046 CKPOINT Loose Lug Nut Indicators t guarantee wheel-offs will not occur. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE CPY19MM CPY20MM CPY21MM CPY22MM CPY23MM CPY24MM CPY25MM CPY26MM CPY27MM CPY28MM CPY29MM CPY30MM CPY31MM CPY32MM CPY33MM CPY34MM CPY35MM CPY36MM CPY38MM CPY40MM CPY41MM CPY44MM CPY46MM ASCOT NO. MFG. NO. 402-20017 402-20018 CPY17MM CPY18MM DESCRIPTION CHECKPOINT CHECKPOINT 17mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 18mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 19mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 20mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 21mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 22mm (7/8") Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 23mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 24mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 25mm (1") Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 26mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 27mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 28mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 29mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 30mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 31mm (1-1/4") Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 32mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 33mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 34mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 35mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 36mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 38mm (1-1/2") Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 40mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 41mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 44mm Fluorescent Yellow Loose Lug Nut Indicator CHECKPOINT 46mm Fluorescent Yellow Loose Lug Nut Indicator 87 WHEEL SERVICE PRODUCTS

88 WHEEL SERVICE PRODUCTS Loose Nut Prevention (cont.) ASCOT NO. MFG. NO. 402-21019 402-21021 402-21022 402-21030 402-21031 402-21032 402-21033 402-21036 402-21038 402-21040 402-21041 402-21044 402-21046 402-20133 402-20333 402-23133 CPOHY19MM CPOHY21MM CPOHY22MM CPOHY30MM CPOHY31MM CPOHY32MM CPOHY33MM CPOHY36MM CPOHY38MM CPOHY40MM CPOHY41MM CPOHY44MM CPOHY46MM CPCYPP33MM CPTRPP33MM DESCRIPTION CHECKPOINT HI-TEMP CHECKPOINT 19mm Orange Hi-Temp Loose Lug Nut Indicator CHECKPOINT 21mm Orange Hi-Temp Loose Lug Nut Indicator CHECKPOINT 22mm Orange Hi-Temp Loose Lug Nut Indicator CHECKPOINT 30mm Orange Hi-Temp Loose Lug Nut Indicator CHECKPOINT 31mm Orange Hi-Temp Loose Lug Nut Indicator CHECKPOINT 32mm Orange Hi-Temp Loose Lug Nut Indicator CHECKPOINT 33mm Orange Hi-Temp Loose Lug Nut Indicator CHECKPOINT 36mm Orange Hi-Temp Loose Lug Nut Indicator CHECKPOINT 38mm Orange Hi-Temp Loose Lug Nut Indicator CHECKPOINT 40mm Orange Hi-Temp Loose Lug Nut Indicator CHECKPOINT 41mm Orange Hi-Temp Loose Lug Nut Indicator CHECKPOINT 44mm Orange Hi-Temp Loose Lug Nut Indicator CHECKPOINT 46mm Orange Hi-Temp Loose Lug Nut Indicator POINT TO POINT CHECKPOINT Caution Yellow Point to Point 33MM Loose Lug Nut Indicator CHECKTORQUE Point to Point 33MM Red Loose Lug Nut Indicator CPOHTPP33MM Checkpoint Point to P Hi-Temp Loose Lug Nut Indic 402-24027 402-24028 402-24030 402-24032 402-24033 402-24038 402-24133 402-25032 402-25033 402-25133 402-25021 402-25022 CPDTY27MM CPDTY28MM CPDTY30MM CPDTY32MM CPDTY33MM CPDTY38MM CPDTSG33MM ASCOT NO. MFG. NO. DESCRIPTION DUSTITE Dustite Yellow 27mm Loose Lug Nut Indicator Dustite Yellow 28mm Loose Lug Nut Indicator Dustite Yellow 30mm Loose Lug Nut Indicator Dustite Yellow 32mm Loose Lug Nut Indicator Dustite Yellow 33mm Loose Lug Nut Indicator Dustite Yellow 38mm Loose Lug Nut Indicator Dustite Silver Gray 33mm Loose Lug Nut Indicator DUSTITE LONG REACH CPDTLRY32MM Dustite Long Reach Yellow 32mm Loose Lug Nut Indicator CPDTLRY33MM Dustite Long Reach Yellow 33mm Loose Lug Nut Indicator CPDTLRSG33MM Dustite Long Reach Silver Gray 33mm Loose Lug Nut Indicator CPDTLRY21MM CPDTLRY22MM Dustite Long Reach Yellow 21mm Loose Lug Nut Indicator Dustite Long Reach Yellow 22mm Loose Lug Nut Indicator CHECKPOINT DUSTITE DUSTITE LONG REACH *The use of CHECKPOINT Loose Lug Nut Indicators does not guarantee wheel-offs will not occur. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS 89 ROLLOCK - LOOSE NUT PREVENTION LUG LOCK WHEEL NUT RETAINERS • Cost effective way to prevent wheel nuts from loosening • Galvanized steel product locks wheel nuts in place • APPLICATION: ROLLOCK is for use on 19.5 & 22.5 Hub-Piloted Wheels (8 or 10 hole) • ROLLOCK IS EASY TO REMOVE: Unscrew the Wheel Nut in normal manner and the ROLLOCK clamp will easily come off • Use the resistance between two nuts to minimize their ability to rotate and loosen • Flexible and easy to install, fits over two adjacent nuts • Field tested at high and low rotation levels • Lab tested in severe vibration conditions • APPLICATION: Designed to be used on wheels with 33mm nuts on 3.5" stud centers • Compatible with a complete wheel mounting safety program • Other sizes and colors available 402-62000 LOCKS WHEEL NUTS IN PLACE FLEXIBLE & EASY TO INSTALL available. COST EFFECTIVE FIELD TESTED The Rollock is a cost effective way to prevent nuts from loosening. The Lug Lock Wheel Nut Retainers in use. ASCOT NO. MFG. NO. 402-62000 402-62500 62000 62500 DESCRIPTION Rollock, 4-1/8" Spacing, 30-33mm Nut Rollock, 3-1/2" Spacing, 30-33mm Nut ASCOT NO. MFG. NO. 402-62600 62600 DESCRIPTION 3 1/2" Spacing, 350 degrees WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS

90 WHEEL SERVICE PRODUCTS Wheel Centering Products “EZ ON” WHEEL CENTERING TOOL SET WHEEL CENTERING PRODUCTS FOR HUB PILOTED WHEELS 1 Increases fuel mileage 2 Increases tire life 3 Decreases tire vibration 4 Cuts rebalancing costs 5 Reduces “wheel-off” condition 6 Reduces tire cupping Wheel Vibrations? Wheel Hop? Brake Pedal Pulsations? Erratic Tire Wear? Excessive Fuel Consumption? If you are experiencing these problems, it may be because your wheels aren’t centered on the hub. And if your wheels aren’t centered, you will continue to experience these problems. With Specialty Products’ Wheel Centering Products, you can re-center your wheel, and eliminate all of these problems. Hub pilot wheel sitting off-center on wheel holes can create gaps Our new threadless design allows the installer to quickly and easily center the wheels to the hub. And our tapered design makes it easy to mount the wheel over the hub. Simply slide the 3 centering taper tools over the wheel studs at the 12, 8, and 4 o’clock positions; moun wheel and add lugnuts; remo the tools and replace remaining lugnuts, torquing to manufac specifications. The wheel is no completely centered. Problem Solved! • Threadless Design • Saves Installation Time • Tapered Nose • Eases Wheel Mounting • Single Set • APPLICATION: For Steer, Drive & Trailer Axles Wheel stud and wheel hole gap can create spaces or gaps between wheel and hub pilot How it works If your hub piloted wheel is sitting on the hub stud off-center (as shown in the illustration to the left) you need these parts and tools to avoid wheel hop and excess tire wear, and to increase your fuel mileage. The theory behind the hub pilot is it centers the wheel. The fact is gravity causes the weight of the wheel to rest only on the upper pilots creating a gap in the bottom pilots. Even the smallest gap results in an egg shaped motion upon rotation. This uneven motion creates rolling resistance which causes tire vibration, increased fuel consumption and erratic tire wear. The bottom line is, you can’t balance an egg. When the wheel rests on the upper hub pilot this produces a gap at the other pilots resulting in an off-center condition. This causes wheel vibration and erratic tire wear. ASCOT NO. MFG. NO. 491-32111 32111 DESCRIPTION “EZ On” Wheel Centering Tool Set “EZ ON” WHEEL & BRAKE DRUM CENTERING SLEEVES • These sets center both steer axle HD wheels and brake drums to minimize wheel vibrations, brake pedal pulsations and wheel hop • APPLICATION: For both Aluminum and Steel steer wheels and a variety of brake drum types 491-32120 491-32121 ASCOT NO. MFG. NO. 491-32120 491-32121 491-32124 32120 32121 32124 DESCRIPTION Aluminum 1.25" hole/.5" depth Aluminium 1.25" hole/.25" to .3125" depth Steel 1.25" hole/.5" depth 491-32124 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS O-LINE-ER WHEEL STUD ALIGNMENT TOOL • Makes it easy to line up wheel studs with holes in rim for easy installation • Decreased installation time • Increase worker productivity • Reduce risk of injury from struggling with heavy tires and rims ASCOT NO. MFG. NO. 491-00101 DESCRIPTION GTO-01TB O-Line-Er Wheel Stud Alignment Tool 491-00101 91 The O-Line-Er Wheel Stud Alignment Tool makes it easy to line up wheel studs with holes in rim for easy installation. “SOLUTION A” WHEEL CENTERING PIN SETS “SOLUTION B” INTERNAL CENTERING SLEEVES • Reusable Shop Tool • Hardened Steel • Threaded Inside for Easy Removal • Sold in sets of 3 with storage case ASCOT NO. MFG. NO. 491-02666 A-2666 DESCRIPTION Steer & Drive axles, 5" length, Steel & Aluminum wheels, will center 1" brake drums 491-01573 A-1573 Steer & Drive axles and some trailers, 4" length, Steel & Aluminum Wheels 491-01339 A-1339 Steer axles, 3" length, Steel & Aluminum wheels ASCOT NO. 491-01825 MFG. NO. B-1825-CON-A DESCRIPTION 1.34-1.37" diameter hole, 1/2" hole depth 107507 10005331 10005332 10009920 ASCOT NO. 491-01860 491-01339 491-01573 491-02666 ASCOT NO. 491-01594 MFG. NO. B-1594-CA DESCRIPTION 1.25" Diameter Hole, 1/4" Hole Depth GUNITE # 9001X 9000X 9035X MOTOR WHEEL CENTRIFUSE # ARVIN MERITOR # 90089BK 89870BK 90174BK 91265B 90600B 90137B 53-123512-002 53-123542-002 53-123627-002 53-123-589-002 53-123-608-002 MFG. NO. DESCRIPTION B-1860-CON-A 1.28" Diameter Hole, 1/2" Hole Depth CONMET # 107164 107193 107453 107862 10001780 10001781 10001783 65161B 65167B 61528B 65547B • Threaded Inside for best positioning and retention • Stays on wheels • Zinc plated to resist corrosion • All brake drum numbers are subject to change without warning due to manufacturer changes beyond our control • Sold in sets of 6 per axle ASCOT NO. 491-01504 MFG. NO. B-1504-GA DESCRIPTION 1.25" Diameter Hole, 1/2" Hole Depth 3573X 3596X 3597X 3598X 3686X GUNITE # 3687X 3710X 3786X 3721AX 3726X CONMET # 1001783 10033071 10037815 3758X 3774X 3800X WEBB # 65548B 65554B 65710B WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS FOR STEER AXLES ONLY

92 WHEEL SERVICE PRODUCTS Lug Nut Removal Products 3-PIECE TWIST SOCKET LUG NUT REMOVAL SYSTEM • Removal of damaged 3/4" and 19mm, 13/16" and 21mm lug nuts • Two dual-sided twist sockets have a fluted design which gives the sockets a tight grip to remove the most difficult locking and damaged lug nuts from the socket • Works with 1/2" impact gun or breaker bar for service calls • Includes an extractor punch 5-PIECE 1/2" DRIVE TWIST SOCKET SET • Designed to easily remove damaged, rounded nuts • Use with 1/2" drive impact wrench or breaker bar • CR-MO steel for long life • Heavy duty blow molded case • INCLUDES: 17mm, 19mm, 21mm & 22mm twist sockets plus a 50mm extractor punch 492-04300 492-04200 ASCOT NO. MFG. NO. DESCRIPTION 492-04200 4200A 492-04300 4300 REMOVE DAMAGED, ROUNDED NUTS Dual Sided Twist Socket Lug Nut Remover 3-Piece Twist Socket Lug Nut Removal System 492-01250 492-01260 1/2" DRIVE DUAL-SIDED SOCKET LUG NUT REMOVER TOOL • Dual flip 1/2" drive impact design • Removes missing and distorted lug nuts with chrome caps 492-01240 492-01250 ASCOT NO. MFG. NO. DESCRIPTION 492-01240 492-01260 LT 1240 Chrysler/Dodge 21mm chrome cap lug nuts (21/21.5mm) LT 1250 GM & Chrysler 19mm chrome caps (18.5/19.5mm) LT 1260 Chrysler/Dodge 22mm chrome cap lug nuts (22/22.5mm) TWIST SOCKET REMOVAL KIT • This kit easily removes damaged nuts, studs, pipe nipples and bolts • Comes mounted on a 1/2" rail, individually packaged 1/2" DR. 4-PIECE FLANK BITE DAMAGED NUT REMOVER SOCKET SET • INCLUDES THE FOLLOWING SIZES: 17mm, 19mm, 21mm, 22mm 492-04400 ASCOT NO. MFG. NO. DESCRIPTION 492-04400 163-22219 LT 4400 1/2" Drive 6-Piece Twist Socket Removal Kit 5-PIECE LOCKING LUG NUT TWIST SOCKET REMOVAL KIT ASCOT NO. MFG. NO. 492-00502 TSS5 DESCRIPTION 5-Piece 1/2" Drive Twist Socket Set ASCOT NO. MFG. NO. DESCRIPTION REPLACEMENT SOCKETS FOR TSS5 SET 492-05021 492-05022 492-05023 ASCOT NO. MFG. NO. 163-22219 DESCRIPTION 122019K2 1/2" DR 4-Piece Flank Bite Damaged Nut Remover Socket Set 492-05024 492-05025 TSS5-1 17mm Replacement Twist Socket TSS5-2 19mm Replacement Twist Socket TSS5-3 21mm Replacement Twist Socket TSS5-4 22mm Replacement Twist Socket TSS5-5 Twist Socket Set Extractor Punch 492-04240 ASCOT NO. MFG. NO. DESCRIPTION 492-04240 • Removes locked or damaged lug nuts without a key • Now in 4 sizes for maximum coverage • Lug nuts are usually reusable • Works with a breaker bar or other related tool • Comes mounted on a 1/2" rail, individually packaged LT 4240 5-Piece Locking Lug Nut Twist Socket Removal Kit BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS 8-PIECE LUG NUT & WHEEL STUD CHECKER SET NUT BUDDY LUG NUT REMOVER • Loosens the most stubborn wheel nuts • APPLICATION: Use on commercial or agricultural wheels • GEAR RATIO: 58:1 • RATED OUTPUT TORQUE: 2950 ft/lbs. • TWO SOCKETS INCLUDED: 1-1/2" (38mm) and 1-5/16" (33mm) Wheel stud thread size gauge includes both male and female threads for checking lug nuts, wheel locks and wheel studs • Size permanently stamped onto each gauge • Color coded for easy identification INCLUDES: Purple (M12x1.25), Orange (M12x1.50), Pink (M12x1.75), Black (M14x1.50), Silver (M14x2), Red (9/16x18), Green (7/16x20) & Blue (1/2x20) ASCOT NO. MFG. NO. 493-00801 8TGCS DESCRIPTION 8-Piece Lug Nut & Wheel Stud Thread Checker Set SAVE-A-STUD RETHREAD KIT - AUTOMOTIVE LOOSENS STUBBORN NUTS • Damaged studs can be renewed in minutes without removing the caliper, rotor, or stud • A 30-second solution to an hour-long job • Solves the problem of removing and replacing damaged wheel studs • Lifetime warranty • Individual sizes also available 404-67300 ASCOT NO. MFG. NO. 404-67300 67300 DESCRIPTION Nut Buddy Lug Nut Remover 9-PIECE SAVE-A-S RETHREAD KIT • Repairs damaged wheel s • 9-Piece Rethread Kit • F passenger, light truck, and heavy duty • Guaranteed f • Individual dies available ASCOT NO. MFG. NO. 493-30100 30100 DESCRIPTION Save-A-Stud Rethread Kit - INCLUDES: 7/16", 1/2", 9/16", 5/8", 12mm - 1.25", 12mm - 1.5", 14mm - 1.5" SAV-A-STUD RETHREAD KIT - TRUCK • Repairs wheel studs, spindles and standard threaded studs • Lifetime warranty 93 493-00801 LIFETIME GUARANTEE 493-31210 KIT CONTENTS SAE: 7/16"-20, 1/2"-20, 9/16"-18, 5/8"-18 METRIC: 12mm-1.25, 12mm-1.50, 12mm-1.75, 14mm-1.50, 14mm-2.00 ASCOT NO. MFG. NO. 493-31210 31210 DESCRIPTION 9-Piece Save-A-Stud Rethread Kit 493-30125 30125 ASCOT NO. MFG. NO. 493-30120 30120 DESCRIPTION Save-A-Stud Plus Rethread Kit (9 pcs.) - INCLUDES: 9/16" - 18, 5/8" - 18, 14mm - 1.5, 14mm - 2.0, 7/16" x 20, 1/2" - 20 Right, 12mm - 1.25, 12mm - 1.5, 12mm - 1.75 Save-A-Stud Plus HD (3 pcs.) - INCLUDES: 3/4" - 16" Right, 3/4" - 16" Left, 22 - 1.5mm WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS

94 WHEEL SERVICE PRODUCTS Lug Nut Removal Products ( 16-PIECE LOCKING LUG KEY SE • Heat treated chrome vanadium steel construction • Thin wall sockets prevent damage to wheels • Double hex head design fits most lug wrenches • Easily removes locking lug nuts • Extra long lug keys keep your wrench away from the wheel preventing nicks and scratches KIT CONTENTS HEX: 11mm, 12mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm SOCKETS INCLUDED: (2) 5/8", 41/64", 45/64", (2) 15/32", 19/32", (2) 11/16", 3/4", 7/16", 5/8", (2) 1/2", 13/16", 9/16" ASCOT NO. MFG. NO. DESCRIPTION 402-01283 402-28301 402-28302 402-28303 402-28304 402-28305 402-28306 402-28307 402-28308 402-28309 402-28310 402-28311 402-28312 402-28313 402-28314 402-28315 402-28316 1283-2 1283-3 1283-4 1283-5 1283-6 1283-7 1283-8 1283-9 1283-10 1283-11 1283-12 1283-13 1283-14 1283-15 1283-16 HEAVY DUTY • Packed in blo case with c CHT1283 16-Piece Locking Lug Key Set 1283-1 402-01283 7-Spline Small Diameter Lug Nut Socket - 3/4" Inner Diameter 7-Spline Small Diameter Lug Nut Socket - 11/16" Inner Diameter 7-Spline Small Diameter Lug Nut Socket - 5/8" Inner Diameter 5-Spline Small Diameter Lug Nut Socket - 5/8" Inner Diameter 10-Point Star Lug Nut Key - 1/2" Tip Outer Diameter 8-Point Star Lug Nut Key - 5/8" Tip Outer Diameter 8-Point Star Lug Nut Key - 7/16" Tip Outer Diameter 8-Point Star Lug Nut Key - 1/2" Tip Outer Diameter 6-Spline Small Diameter Lug Nut Socket - 45/64" Inner Diameter 1283-6 6-Spline Small Diameter Lug Nut Socket - 41/64" Inner Diameter High Tech Hex Lug Nut Key - 15mm Hex Size High Tech Hex Lug Nut Key - 9/16" Hex Size High Tech Hex Lug Nut Key - 12mm Hex Size High Tech Fluted Hex Lug Nut Key - 12mm Hex Size 12-Spline Small Diameter Lug Nut Socket - 13/16" Inner Diameter 12-Spline Small Diameter Lug Nut Socket - 11/16" Inner Diameter High Tech Hex Lug, 15mm Outer Dimension High Tech Hex Lug, 9/16” Outer Dimension High Tech Hex Lug, 12mm Outer Dimension 1283-11 1283-12 1283-13 1283-14 1283-15 1283-16 8-Point Star Lug, 5/8” Outer Diameter 8-Point Star Lug, 7/16” Outer Diameter 9-Point Star Lug, 1/2” Outer Diameter 6-Spline Small Diameter Socket, 45/64” Inner Diameter 6-Spline Small Diameter Socket, 41/64” Inner Diameter 1283-7 1283-8 1283-9 1283-10 7-Spline Small Diameter Socket, 3/4” Inner Diameter 7-Spline Small Diameter Socket, 11/16” Inner Diameter 7-Spline Small Diameter Socket, 5/8” Inner Diameter 5-Spline Small Diameter Socket, 5/8” Inner Diameter 10-Point Star Lug, 1/2” Outer Diameter 1283-1 1283-2 1283-3 1283-4 1283-5 APPLICATION GUIDE High Tech Fluted Hex Lug, 12-Spline Small Diameter Socket, 12mm Outer Dimension 13/16” Inner Diameter 12-Spline Small Diameter Socket, 11/16” Inner Diameter BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS R 95 4-PIECE LUG NUT REMOVER IMPACT SOCKET SET • APPLICATION: Use for removing wheel locks or damaged lug nuts • Patented, internal tapered reverse threads lock onto damaged nut and easily pulls off using impact wrench • Convenient compact storage case • INCLUDES THE FOLLOWING 1/2" DRIVE SIZES: 3/4", 13/16", 1", 1-1/8" • MADE IN USA 4-PIECE HEAVY DUTY WHEEL STUD REMOVER SET MADE IN THE USA • APPLICATION: Removes damaged wheel studs and inner Budd nuts • Patented, internal tapered reverse threads lock onto damaged stud or nut and easily pulls off using impact wrench • Wheel Stud Removers are 3/4" hex drive • Budd Nut Removers are 1-1/8" hex drive • Convenient compact storage case, 6.5" x 4.5" x 2.75"; 3.5 lbs • SET INCLUDES THE FOLLOWING SIZES: 5/8", 3/4", 1-1/8" Budd wheel inner nut left hand thread, 1-1/8" Budd wheel inner nut right hand thread • MADE IN USA MADE IN THE USA 492-30254 492-30649 REMOVES WHEEL LOCKS & LUG NUTS REMOVES STUDS & BUDD NUTS ASCOT NO. MFG. NO. 492-30254 30254 DESCRIPTION 4-Piece Lug Nut Remover Impact Socket Set INCLUDES: 3/4", 13/16", 1", 1-1/8" (1/2" Drive) ASCOT NO. MFG. NO. 492-30649 30649 DESCRIPTION 4-Piece Heavy Duty Wheel Stud Remover Set INCLUDES: 5/8", 3/4", 1-1/8" Budd left hand, 1-1/8" Budd right hand WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS

96 WHEEL SERVICE PRODUCTS Lug Nut Removal Products (cont.) 1/2" DRIVE 9-PIECE WHEEL LOCK REMOVAL KIT • APPLICATION: For Ford, Chrysler & GM Vehicles as well as standard and oversized OEM and aftermarket wheel locks for other domestic and imported cars and light trucks 1/2" DRIVE 13-PIECE WHEEL LOCK REMOVAL KIT • APPLICATION: For Ford, Chrysler & GM Vehicles as well as standard and oversized OEM and aftermarket wheel locks for other domestic and imported cars and light trucks HEAVY DUTY HEAVY DUTY 401-02840 ASCOT NO. 401-02840 401-28401 401-28402 401-28403 401-28404 401-28405 401-28406 401-28407 401-28408 401-28409 MFG. NO. DESCRIPTION KIT CONTENTS 2840 28401 28402 28403 28404 28405 28406 28407 28408 28409 9-Piece Wheel Lock Remover Kit Individual Wheel Lock Remover for Ford and Chrysler Hubcap Locks Individual Wheel Lock Remover for Ford Wheel Locks and 18mm GM Lug Nuts Individual Wheel Lock Remover for Corvette, GM, N & F Body Wheel Locks Individual Wheel Lock Remover for Oversize McGard Wheel Locks Individual Wheel Lock Remover for McGard Wheel Locks & GM Hubcap Locks Individual Wheel Lock Remover Extractor Punch Individual Wheel Lock Remover for Chrysler Hubcap Locks Individual Wheel Lock Remover for GM Hubcap Locks Individual Wheel Lock Remover for GM Spline Hubcap Locks PARTS INCLUDED Ford, Chrysler & Large GM Lock Remover GM Spline Hublock Adapter Standard GM Hubcap Locks Stripped 18mm/GM Wheel Cover Adapter Corvette-GM N& F Body Adapter Standard Ford & GM/ Large Wheel Adapter KIT CONTENTS PARTS INCLUDED Oversized McGuard Wheel Lock Adapter Punch Late Model Chrysler Lock Adapter 1/2" Dr. 18mm Nut/Corvette GM Lock Remover 3/4", 19mm, OS Wheel Lock Remover 7/8" OS Wheel Lock Remover 1/2" x 3" Impact Extension 401-02841 ASCOT NO. MFG. NO. 401-02840 2840 DESCRIPTION ASCOT NO. MFG. NO. 401-02841 Deluxe Hubcap Wheel Lock Removal System 12840-13 1/2" Drive 13-Piece Wheel Lock Removal Kit DESCRIPTION BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS 97 COMMERCIAL TRUCK CHROME LUG NUT PULLER CHROME LUG NUT COVER REMOVER • Thick carbon steel material provides strength for heavy duty applications • Round shape handle provides comfort and ease of operation • Suitable for all heavy duty truck lug nut applications • Two hole design can be switched to expand range and size of application • Coated jaws protect painted, aluminum or chrome plated lug nuts from damage • Coated to prevent scratching or damage to chrome, coated or painted lug covers • Cushioned grip to prevent slippage COATED TO PREVENT DAMAGE TWO HOLE DESIGN COATED TO PREVENT DAMAGE CUSHIONED GRIP ASCOT NO. MFG. NO. 402-03116 DESCRIPTION 202603-HD Commercial Truck Chrome Lug Nut Puller HEAVY DUTY PROFESSIONAL CHROME NUT PULLER • Coated to prevent scratching or damage to chrome, coated or painted lug covers • Cushioned grip to prevent slippage • NO ADJUSTMENT REQUIRED: Fits all 33mm & 1½" covers • Similar to Ken Tool 30606 402-30606 CUSHIONED GRIP HEAVY DUTY COATED TO PREVENT DAMAGE ASCOT NO. MFG. NO. DESCRIPTION 402-30606 30606 Chrome Lug Nut Cover Remover ASCOT NO. MFG. NO. 402-03016 202603 DESCRIPTION Heavy Duty Professional Chrome Nut Puller with Cushion Handle WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS

98 WHEEL SERVICE PRODUCTS Wheel Attaching Hardware HUB CENTRIC NUT By filling the void between the stud hole, “clocking” is eliminated, and problems caused by clocking, such as wheel offs and wheel hub vibrations, are eliminated. • Hub Centric Nut fills void standard flange nuts don’t • Stops rim from shifting forwards or backwards • Eliminates “clocking” caused by standard wheel nuts not filling wheel hole completely • Metric 2-piece hub centering nut • Elongated neck for centering the wheel to the hub • Certified American Steel • Each part tested for thread, fit and finish • QUANTITY: 50 per box 491-00133 Hub Centric Nut TOP VIEW SIDE VIEW MADE IN THE USA ASCOT NO. MFG. NO. 491-00133 DESCRIPTION Oil Nut X10-PN22B 33mm Hex X 1.5mm Thread Oil Stud WHEEL ASSEMBLY WITH STANDARD NUT WHEEL ASSEMBLY WITH HUB CENTRIC NUT Void (Highlighted in Green) between stud and hole Hub Centric Nut fills void between stud and hole Yellow Stud Note marks on the disc (just outside stud hole) caused by “clocking” highlight shows void between stud and stud Hub Centric Nut fills void between stud and hole This nut had been torqued to specifications and retorqued per factory settings. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS 99 SKIRT NUTS • Stops wheel/hub vibrations and many tire wearing problems • Stops wheel movement (clocking) on the face of the hub • Eliminates wasted fuel caused by rolling resistance or “drag” • Special graphite coating prevents nut from rusting onto the hub • QUANTITY: 25 per box 33MM SKIRT NUT • Original Skirt Nut • Replaces standard M22 flange nuts on 11.25" hub-piloted wheels • Partially penetrates the stud hole and prevents clocking and vibration • QUANTITY: 100 per case ELIMINATES WASTED FUEL Extended threading allowing Skirt Nut to go down into Hub-Piloted Disc Wheel an extra 3/16" (5mm) into stud hole PREVENTS CLOCKING 491-02906 STOPS CLOCKING & VIBRATION 491-02301 491-02919 PREVENTS VIBRATION 26mm stud hole 22mm stud There is a fairly large tolerance between the diameter of each stud hole and the diameter of the stud itself. 491-02928 491-01133 ASCOT NO. MFG. NO. DESCRIPTION 491-01133 SN-M22 ASCOT NO. MFG. NO. DESCRIPTION 491-02301 GL-2301 33mm Skirt Nut 491-02906 491-02919 GL-2919 Haltec 33mm 2-Piece Flange Nut: • 130 per Case • Inner Thread M22-1.5 • For Uni-Mount 10-Hole Systems GL-2906 Haltec 6mm Sleeve Nut: Steel Steers Haltec 19mm Sleeve Nut: • Aluminum Steers • Steel/Steel Drives • Steel Outer/Aluminum Inner Drives 491-02928 GL-2928 Haltec 28mm Sleeve Nut: • HD Aluminum • Super Single • Wide Base • Aluminum Outer/Steel Inner Drives 491-02939 GL-2939 Haltec 39mm Sleeve Nut: Dual Aluminum Drive Axle 491-02939 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS

100 WHEEL SERVICE PRODUCTS Wheel Attaching Hardware (cont.) GRADE 8 DISC WHEEL HARDWARE-INNER CAP NUTS ASCOT NO. FOR SIRCO 491-00708 491-00709 491-00896 491-01896 491-00897 491-01897 491-00978 491-01978 491-00306 491-01306 SIRCO NO. ASCOT NO. FOR GLP 708AR 491-01001 (RH) GLP NO. GL-1001 OUTER THREAD INNER THREAD OVERALL LENGTH 1 1/8" - 16 3/4" - 16 2 7/32" 709AL 491-01002 (LH) GL-1002 1 1/8" - 16 3/4" - 16 2 7/32" 896R 896L 897R 897L 988R 988L 306R 306L 491-01003 (RH) GL-1003 1 1/8" - 16 3/4" - 16 2 9/16" 491-01004 (LH) GL-1004 1 1/8" - 16 3/4" - 16 2 9/16" 491-01005 (RH) GL-1005 1 1/8" - 16 3/4" - 16 3 1/16" 491-01006 (LH) GL-1006 1 1/8" - 16 3/4" - 16 3 1/16" 491-01011 (RH) 491-01012 (LH) GL-1011 GL-1012 1 1/8" - 16 3/4" - 16 3 1/16" 1 1/8" - 16 3/4" - 16 3 1/16" METRIC 491-01009 (RH) GL-1009 M30 -1.5 M20 -1.5 491-01010 (LH) GL-1010 M30 -1.5 M20 -1.5 M-62 (2 7/16") M-62 (2 7/16") Hino 900423101 Hino 900424101 GRADE 8 DISC WHEEL HARDWARE-OUTER CAP NUTS ASCOT NO. FOR SIRCO 491-00891 491-00892 491-00888 491-00889 491-00995 491-01995 N/A N/A N/A N/A N/A N/A 491-00304 491-01304 491-00033 491-00881 SIRCO NO. 891AR 892AL 888R 889L 995R 995L 891BR 892BL N/A N/A N/A N/A 304R 304L 333B 881M ASCOT NO. FOR HALTEC 491-02001 (RH) 491-02002 (LH) 491-02101 (RH) 491-02102 (LH) 491-02103 (RH) 491-02104 (LH) 491-01891 491-02892 491-02203 491-02204 491-02202 491-02303 491-02009 491-02010 491-02301 491-02302 HALTEC NO. GL-2001 GL-2002 GL-2101 GL-2102 GL-2103 GL-2104 GL-2004 GL-2003 GL-2203 GL-2204 GL-2202 GL-2303 GL-2009 GL-2010 GL-2301 GL-2302 Budd 37891 Budd 37892 Budd 37888 Budd 37889 Alcoa 5995R Alcoa 5995L SIMILAR TO: Euclid 5997R Euclid 5997L Euclid 5652R Euclid 5652L Euclid 5995R Euclid 5995L Leland W-13 Leland W-14 Leland W-15 Leland W-16 Leland W-506 Leland W-507 THRU HARDNESS - GMC-3988631 Budd 95188 Budd 95189 Budd 81269 Alca 389928 METRIC Hino 900421112 Hino 900422104 Budd 106333 MW 88881 Isuzu 1-42333023 Isuzu 1-42334023 Euclid 6000A Euclid 5991 Leland W-722/3 Euclid 10254R/L Leland W-498 Leland W-492 Lubricate nut & stud before applying to the vehicle Euclid 9022R Euclid 9022L Euclid 5734 Ford E4tZ-1012A Dodge 3637719 Dodge 3637720 GMC 3771410 N/A Isuzu 1-42335005 - Zinc Isuzu 1-42336005 - Zinc Budd 10708 Budd 10709 Budd 35336 Budd 35337 Budd 22621 Budd 22622 Alcoa 5988R Alcoa 5988L SIMILAR TO: Euclid 7895R Euclid 7895L Euclid 7896R Euclid 7896L Euclid 7897R Euclid 7897L Euclid 5988R Euclid 5988L Leland W-11 Leland W-12 Leland W-620 Leland W-621 Leland W-616 Leland W-617 Leland W-486 Leland W-487 Steel/Steel Steel/Steel Steel/Alum Steel/Alum 491-01003 Steel/Alum Steel/Alum Alum/Alum Alum/Alum 491-01011 491-01001 491-02001 491-02203 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS The Counteract Wheel Centering Sleeves in use. COUNTERACT WHEEL CENTERING SLEEVES • Patent pending wheel centering system that works in conjunction with your OEM style two-piece flange nuts • Unique self-sizing & non-corrosive design re-aligns the wheel to the TRUE CENTER of the hub bearing • Increased fuel mileage, increased tire life, decreased tire vibration, stops irregular tire wear, decreased tire maintenance, reduced tire cupping, reduced “wheel off” conditions • Made from a high temperature resistant polyamide COUNTERACT INSTALLATION/REMOVAL TOOL • Specifically designed to install and remove Counteract Centering Sleeves 101 491-02111 ASCOT NO. MFG. NO. DESCRIPTION 491-02111 WCS-IT Counteract Installation/Removal Tool WHEEL STUD ALIGNMENT SET • 5 SIZES: M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1.25, M14 x 1.5 • Each stud is marked with the thread size • Color coded for easy identification • Knurled edges provide a secure grip • Comes in a sturdy blow molded case 491-02622 491-02620 491-02100 ASCOT NO. MFG. NO. 491-02622 WCS-B 491-02620 WCS-B20 491-02100 WCS-C 491-02101 WCS-D DESCRIPTION Centering Sleeves Clamshell - 22mm (Pack of 6) Centering Sleeves Clamshell - 20mm (Pack of 6) Centering Sleeves - 22mm (Bucket of 100) Centering Sleeves - 22mm (Bucket of 1,000) 491-19010 ASCOT NO. MFG. NO. DESCRIPTION 491-19010 OT-190F 10-Piece Wheel Stud Alignment Set WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS

102 WHEEL SERVICE PRODUCTS Wheel Attaching Hardware (cont.) MUD FLAP BOLT KIT • All the hardware needed to attach mud flaps to trucks or trailers • INCLUDES: (4) 3/8"-16 x 1-1/4" bolts, (4) 3/8" Nuts, (8) 3/8" flat washers & (4) 3/8" lock washers ASCOT NO. MFG. NO. 491-00038 MFBK DESCRIPTION Mud Flap Bolt Kit ASCOT NO. MFG. NO. 491-04009 491-04012 491-04013 491-04020 491-04021 491-09013 491-09014 DESCRIPTION GL-4009 GL-4012 GL-4013 GL-4020 GL-4021 GL-4913 GL-4974 Standard 6-Hole Hubcap 6-Hole Gasket for Above Universal Gasket - 5 or 6 Hole Replaceable Window Kit Rubber Plug for Bolt-On Cap Fruehauf/Propar Cap O-Ring for Screw-On Cap OIL SEAL HUBCAPS AND GASKETS 491-04009 CONE WHEEL NUTS 491-00038 491-00014 SPOKE WHEEL HARDWARE 491-03002 491-03005 ASCOT NO. FOR SIRCO 491-00149 491-00716 SIRCO NO. ASCOT NO. FOR HALTEC HALTEC NO. THREAD RIM CLAMP NUTS 149 491-03004 GL-3004 5/8-11 Dayton 5149 716 491-03005 GL-3005 3/4-10 Dayton 5716 RIM STUDS (GRADE 8) 491-00654 654 491-03001 GL-3001 5/8-11x23/4 N/A Dayton 6654 N/A 491-03002 GL-3002 3/4-10x3 Dayton 5715 Euclid 4958 Euclid 4956-A Leland W-5 Leland W-6 BRAKE DRUM MOUNTING HARDWARE 491-06014 LOCKING BACK NUTS 491-06023 ASCOT NO. HALTEC NO. 491-06023 491-02431 491-02445 SIZE GL-6023 5/8"-18 GL-2431 7/8"-14 GL-2445 1"-14 SIMILAR TO: MW 85643 Budd 41073-8 Budd 44672-9 — Euclid 1835 Euclid 1828 ASCOT NO. MFG. NO. 491-06012 491-06014 491-06020 491-06021 491-06025 491-06026 491-06023 491-06024 SIZE GL-6012 GL-6014 GL-6020 GL-6021 GL-6025 GL-6026 DESCRIPTION 5/8-18 x 2" 5/8" Brake Bolt/Washer/Assembly 3/4-16 x 2" 3/4" Brake Bolt/Washer/Assembly 5/8-18 x 2" 3/4-16 x 2" 5/8" 3/4" Brake Bolt Only Brake Bolt Only Flat Washer Flat Washer GL-6023 5/8"-18" GL-6024 3/4"-16" Lock Nut Only Lock Nut Only SIMILAR TO: Euclid 4962 Euclid 4963 Leland W-7 Leland W-8 ASCOT NO. MFG. NO. 491-00014 491-00016 491-00027 491-00062 491-00066 491-00065 491-00064 491-00052 491-00055 491-00056 SIZE GL-0014 GL-0016 GL-0027 GL-0062 GL-0066 GL-0065 GL-0052 GL-0055 GL-0056 7/16"-20 (3/4" Hex, 9/16" High) 1/2"-20 (13/16" Hex, 5/8" High) 1/2"-20 (3/4" Hex, 9/16" High) 12mm-1.5 (19mm Hex, 14mm High) 12mm-1.5 (21mm Hex, 16mm High) 12mm-1.25 (21m Hex, 16mm High) GL-0064 12mm-1.25 (19mm Hex, 16mm High) 9/16"-18 (7/8" Hex, 3/4" High) DESCRIPTION G.M. Ford Chrysler G.M. Toyota Nissan Nissan G.M. R.H. 5/8"-18 (1" Hex, 21/32" High) Budd 67147 L.H. 5/8"-18 (1" Hex, 21/32" High) Budd 67147 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS RIM CLAMPS 491-03097 ASCOT NO. FOR SIRCO 491-00399 491-00729 491-00123 491-00235 491-00993 N/A N/A N/A ASCOT NO. FOR SIRCO 491-00257 491-00238 491-00233 N/A SIRCO NO. 729 ASCOT NO. FOR HALTEC 491-03113 HALTEC NO. 399 491-03083 GL-3083 491-03087 GL-3087 A DIM. N/A N/A 123 491-03096 GL-3096 1-1/8" 235 491-03097 GL-3097 1-3/4" 993 491-03098 GL-3098 1-1/2" N/A 491-03099 GL-3099 2-1/8" N/A N/A SIRCO NO. 257 491-03101 GL-3101 491-03103 GL-3103 ASCOT NO. FOR HALTEC 238 491-03271 HALTEC NO. 491-03113 GL-3113 GL-3271 233 491-03279 GL-3279 N/A 491-06115 GL-6115 Mack 15QJ-17P1 Mack 15QJ-223BP8 Mack 15QJ-223BP3 Kelsey 79954 1-7/8" 1-1/4" B. DIM. N/A N/A 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8 2-7/8" 491-06115 C. DIM. N/A N/A 2-11/32", 3/4" Stud 2-11/32", 3/4" Stud 2-11/32", 3/4" Stud 2-11/32", 3/4" Stud 2-11/32", 3/4" Stud 2-11/32", 3/4" Stud SIMILAR TO: Dayton 8399 Dayton 09729514 Dayton 6123 Dayton 6235 Dayton 6993 Dayton 705317 Dayton 851817 Dayton 8708 SIMILAR TO: Euclid 5828 Euclid 5781 Euclid 5821 N/A Euclid 5571A Euclid 5572A Euclid 5040A Euclid 5786 Webb 16124 Euclid 5784 Leland W-3 Leland W-4 Leland w-120 Leland W-403 Leland W-404 Leland W-405 491-00600 ASCOT NO. MFG. NO. 491-00600 600 DESCRIPTION Installation Tool for Alcoa Hub Cover Systems Euclid 5927 Euclid 5838 Leland W-124 Leland W-407 INSTALLATION TOOL FOR ALCOA HUB COVER SYSTEMS • APPLICATION: For use with Alcoa 076185, 077185, 076188 & 077188 Hub Systems 103 DISCMATE WHEEL PROTECTORS Leland W-450 Leland W-448 Leland W-467 N/A • Used to protect the wheel’s mounting surface from cosmetic damage during use • Placed between the wheel and it’s mounting surface on the vehicle and may also be used between 2 dualed wheels for added protection • Wheel nuts should always be tightened to the correct torque following the wheel manufacturer’s specifications STANDARD WHEEL RIM GUARD • APPLICATION: Protects aluminum, chrome and painted truck rims/wheels during stud and nut removal • Inexpensive • Tough polymer design 402-50301 ASCOT NO. MFG. NO. DESCRIPTION 402-50301 50301 Standard Wheel Rim Guard ALUMINUM WHEEL SHIELD • APPLICATION: Covers entire wheel while changing tires • Protects aluminum wheel surface from ground • Torque sequence imprint ASCOT NO. MFG. NO. DESCRIPTION 402-50200 50200 402-50200 Discmate Wheel Protectors Aluminum Wheel Shield ASCOT NO. MFG. NO. DESCRIPTION 402-11000 61020 The standard wheel rim guard in use. The aluminum wheel shield in use. 402-17000 402-18000 61000 61040 10-Hole 285.75mm, Hub Pilot, 22mm Studs 10-Hole 11-1/4" StudPilot, 1-1/8" Studs 10-Hole 335mm, 32mm Cap Nuts, 22mm Studs WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS W L H E E E L S H I D

104 WHEEL SERVICE PRODUCTS Tire & Wheel Service Tools WHEELOK SYSTEMS FOR HEAVY DUTY VEHICLES • APPLICATION: For trucks, tractors or trailers with spok WHEELOK SYSTEMS FOR HEAVY DUTY VEHICLES: FRONT WHEELS • APPLICATION: For trucks, tractors or trailers with disc (Budd) Wheels; For truck or tractor front wheels ASCOT NO. MFG. NO. 401-10160 401-10430 401-10170 DESCRIPTION X10-BN16Z Wheelok Nut & Free Spinning Sleeve - Right-Hand Thread - 2 For Each Wheel To Replace 2 Regular Nuts X10-BN17Z Wheelok Nut & Free Spinning Sleeve - Left-Hand Thread - 2 for Each Wheel to Replace 2 Regular Nuts WHEELOK SYSTEMS FOR HEAVY DUTY VEHICLES: REAR WHEELS • APPLICATION: For trucks, tractors or trailers with disc (Budd) Wheels; For truck or tractor rear wheels 401-10431 ASCOT NO. MFG. NO. 401-10431 401-10430 DESCRIPTION X10-DN43Z Wheelok Nut & Free Spinning Sleeve - 2 Recommended For Each Wheel to Replace 2 Regular Nuts X10-DK43Z Wheelok Key With Replaceable Pin - “Combination” Determined By Position Of Pins ASCOT NO. MFG. NO. 401-10280 401-10290 401-10810 DESCRIPTION X10-BN28Z Wheelok Nut Only - Right Hand Thread - 2 For Each Wheel To Replace 2 Regular Nuts X10-BN29Z Wheelok Nut Only - Left Hand Thread - 2 For Each Wheel To Replace 2 Regular Nuts X10-BK81Z Wheelok Key With Replaceable Pin - “Combination” Determined By Position Of Pins WHEELOK SYSTEMS FOR HEAVY DUTY VEHICLES • APPLICATION: For trucks, tractors or trailers with Budd UnimountTM Wheels - 22mm thread or equivalent WHEELOK SYSTEMS FOR AUTOS & LIGHT TRUCKS • EACH KIT INCLUDES: 4 nuts (1 for each wheel) and 1 key • Available for American vehicles and imports • Combination determined by order of pins Wheel Lug 401-10220 Wheelok Key Wheelok Nut ASCOT NO. MFG. NO. 401-10220 401-10221 DESCRIPTION X10-UN22Z Wheelok Nut, Flange and Free Spinning Sleeve - Combined Into One Single Unit X10-UK22Z Wheelok Key with Replaceable Pin - “Combination” Determined By Position Of Pins ASCOT NO. MFG. NO. 401-10000 401-10000 DESCRIPTION X10-SS00C Wheelok System for autos & light trucks BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS 105 RIB NUT SALVAGE TOOL KIT • INCLUDES: (1) Drift Pin, (1) Salvage Cylinder, (1) LH Thread Bolt, (1) RH Thread Bolt 13/16" SQUARE HEAD ADAPTER ASCOT NO. MFG. NO. 499-10150 DESCRIPTION X10-LS15B Rib Nut Salvage Tool Kit 499-10150 3-PIECE HEX NUT REMOVER KITS ASCOT NO. MFG. NO. 499-10130 499-10171 499-10210 DESCRIPTION X10-SA13B Fits 1-1/2" Socket Wrench to Speed Up Installing Or Removing Budd Wheel Inner Cap Nuts X10-SA17B 17mm Stud Adapter X10-SA21B 21mm Stud Adapter 499-10130 492-15000 HEAVY DUTY DRIVE-ON RIB-GRIP LUG-OFF KITS ASCOT NO. MFG. NO. 492-15000 492-14000 DESCRIPTION X10-NR15B 1-1/2" Hex Nut Remover Kit - 3 Piece X10-NR14B 1-1/4" Hex Nut Remover Kit - 3 Piece STUD INSTALLERS 492-10158 ASCOT NO. MFG. NO. 499-10200 492-10134 ASCOT NO. MFG. NO. 492-10134 492-10150 492-10158 492-10159 492-10196 492-10590 DESCRIPTION X10-SI34Z For 3/4" Studs. Fits 1-1/4" Socket 499-10660 X10-LC15B Rib Nut Salvage Cylinder X10-SI58Z X10-SI96Z For 5/8" Studs. Fits 1-1/4" Socket X10-SI59Z For 5/8" x 18 Studs. Fits 1-1/4" Socket For 9/16" x 18 studs. Fits 1-1/4" Socket X10-SI59Z 5/8"- 18 Stud Installer STUD REMOVERS ASCOT NO. MFG. NO. 492-10340 492-10580 492-10180 492-10780 X10-SR18B REPLACEMENT RIB NUTS ASCOT NO. MFG. NO. DESCRIPTION X10-SR34B For 3/4" Studs. Fits 1-1/4" Socket X10-SR58B For 5/8" Studs. Fits 1-1/4" Socket For 1-1/8" Studs. Fits 1-1/4" Socket X10-SR78B For 7/8" Studs. Fits 1-1/4" Socket 499-10180 499-10341 499-10581 499-10211 499-11171 492-10151 X10-LN18B X10-LN34B X10-LN58B X10-LN21B X10-LN17B X10-LP15Z DESCRIPTION For Budd Wheel Inner Cap Nuts For 3/4" Lug Studs For 5/8" Lug Studs For 21mm Lug Studs For 17mm Lug Studs Drive Pin 499-10340 499-10580 DESCRIPTION X10-LT20B For Removing Damaged Inner Cap Nuts (1-1/8" Dia. - 13/16" Square Head) INCLUDES: (1) Drive-On Tool And (1) Rib Nut X10-LT34B For Removing Damaged 3/4" Lug Studs. INCLUDES: (1) Drive-On Tool And (1) Rib Nut X10-LT58B For Removing Damaged 5/8" Lug Studs. INCLUDES: (1) Drive-On Tool, (1) Rib Nut X10-LT66B Triple Duty Tool For Removing Damaged Budd Wheel Inner Cap Nuts, 3/4" And 5/8" Lug Studs. INCLUDES: (1) Drive-On Tool and (3) Rib Nuts 499-10200 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS

106 WHEEL SERVICE PRODUCTS Tire & Wheel Service Tools (cont.) 7-PIECE SPARE TIRE TOOL SET WHEEL STUD INSTALLERS Prevents damage to your lug nuts or new stud by reducing friction during stud installation Works with hubs, rotors, axles Two sizes available: Vehicle Wheel Stud Installer & Truck Wheel Stud Installer • Allows anyone to quickly remove difficult to reach spare tires • No more digging through the customer’s vehicle to locate the spare tire removal kit • Color-coded wall bracket allows user to quickly identify the correct removal tool • APPLICATION: Includes many trucks & SUV’s where the spare tire is located under the vehicle COLORCODED WALL BRACKET 492-02278 ASCOT NO. MFG. NO. 319-96090 96090A 319-96090 DESCRIPTION 7-Piece Spare Tire Tool Kit ASCOT NO. MFG. NO. DESCRIPTION INDIVIDUAL SPARE TILE TOOLS 319-96091 96091 Spare Tire Tool - Flat Head: Red APPLICATION: For Use on Late Model S10 trucks, Explorers, Blazers, Jimmys, F150s, Expeditions, Older Dakota 2-Wheel Drives and McGuard Lock Systems 319-96092 492-14916 319-96093 319-96094 ASCOT NO. MFG. NO. 492-02278 492-14916 DESCRIPTION TWS-22 TWS-14 Truck Wheel Stud Installer - Fits studs up to 7/8" (22mm) Vehicle Wheel Stud Installer - Fits studs up to 9/16" (14mm) 319-96097 319-96098 319-96095 319-96096 96095 96096 96092 96093 96094 Spare Tire Tool - Pin Head: Blue APPLICATION: For Use on Import Trucks Spare Tire Tool - Hex Head: Yellow APPLICATION: For Use on Dodge Full Size and Stake Bodies, ‘98-’01 Dodge Full-Size 4-Wheel Drive Spare Tire Tool - 12mm Square Head: Green APPLICATION: For Use on All Late Model GMs, Remaining ‘98-’03 Dodge Trucks Spare Tire Tool - Std. Square Head: Orange APPLICATION: For Use on Older Ford Trucks Spare Tire Tool - Slotted Square Head: Black APPLICATION: For Use on Dodge Durango, Inside the Hatch 96097 Wall Mount Bracket for Spare Tire Tool Set Color-coded to allow user to quickly identify the correct removal tool 96098 Spare Tire Tool - 3/8" Square Head: Purple APPLICATION: For Use on New Ford Models BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS 107 UNI-MOUNT M22 THREAD PITCH GAUGE • APPLICATION: Designed for M22 x 1.5 Uni-Mount Studs • If the thread teeth do not fully engage the stud, the stud should be removed from service • Simple to use ASCOT NO. MFG. NO. DESCRIPTION 401-69260 69260 Uni-Mount Thread Gauge 401-69260 SIMPLE TO USE PORTABLE TRUCK WHEEL STUD REMOVER & INSTALLER • Power of a 10-ton shop press • Remove and install studs without removing the hub • Two-hour job is done in twenty minutes without risk of damaging seals or bearings • Any mechanic can use it to get the job done right in minutes CHAMFER/NUT GAUGE • Kit shows when wheel chamfers and wheel nuts are worn out • Visual guide detects excessive wear in bolt holes • APPLICATION: For use with steel stud piloted wheels POWER OF A 10-TON SHOP PRESS 401-69290 ASCOT NO. MFG. NO. 401-69290 69290 DESCRIPTION Chamfer Nut Gauge ALCOA WHEEL INSTALLATION SLEEVES 492-06346 • Align wheel bolt holes • Seat brake drums that have .980" diameter bolt holes • Prevent damage to M22x1.5 studs • Assist in lining up all components for ease of install • INCLUDES: 2 tools per kit • Made in USA 491-00426 ASCOT NO. MFG. NO. 492-06247 492-06346 6247 6346 ASCOT NO. MFG. NO. 491-00426 407422 DESCRIPTION Alcoa Wheel Installation Sleeves Complete PakPress Kit (Includes Cart) DESCRIPTION PakPress Cart WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS

108 WHEEL SERVICE PRODUCTS Stud and Hub Cleaning Tools STUD CLEANING TOOLS • Allows for cleaning the full length of the thread on 10 studs in less than 3 minutes • Works with air or hand tools • CAUTION: Always use eye protection • 1/2" adapter included with each tool • Replacement Brushes Available QUICK & EASY TO USE WORKS WITH AIR OR HAND TOOLS ASCOT NO. MFG. NO. 402-00112 402-00113 402-00014 402-00016 402-00118 402-00120 402-00122 402-00128 SBR12 SBR13 SBR14 SBR16 SBR18 SBR20 SBR22 SBR28 DESCRIPTION REPLACEMENT BRUSHES FOR STUD CLEANING TOOLS 12mm (7/16”) Repl. Brush 13mm (1/2”) Repl. Brush 14mm (9/16”) Repl. Brush 16mm (5/8”) Repl. Brush 18mm (45/64") Repl. Brush 20mm (25/32") Repl. Brush 22mm (7/8”) Repl. Brush 28mm (1-1/8") Repl. Brush 402-00013 402-00028 402-00022 Before Replacement Brush for Stud Cleaning Tool ASCOT NO. MFG. NO. DESCRIPTION 402-00013 402-00022 402-00028 SBCT-13 SBCT28 13mm (1/2") Stud Cleaning Tool After SBCT-22 22mm (7/8") Stud Cleaning Tool 28mm (1-1/8") Stud Cleaning Tool Stud Cleaning Tool in use. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

WHEEL SERVICE PRODUCTS PROFESSIONAL STUD/HUB BRUSH KIT • Ideal for hub and stud cleaning job with ease • QUICK AND EASY: Change brushes in seconds • Includes a 1/2" drive adapter • Powered by a cordless drill • Replacement brushes available 402-37335 ASCOT NO. MFG. NO. 402-37330 402-37335 402-37340 37330 37335 37340 DESCRIPTION Hub Buddy Tool 2" Hub Buddy Tool Replacement Pads 1-1/2" Hub Buddy Tool Replacement Pads HUB BUDDY TOOL • IMPACT RATED: No need to change tools • Complies with best practice R.I.S.T. procedure • Removes rust, corrosion and other build-up from wheel stud, drums and tire rim • Helps proper torque of lug nuts by removing corrosion • A must for easy and accurate tire balancing • INCLUDES: 1 Hub Buddy XL attachment and 1 cleaning disc head • Replacement cleaning discs available in packs of 6 (Product # 402-37335) 109 402-37330 STUD CLEANING KIT 402-32613 ASCOT NO. MFG. NO. 402-32611 402-32613 402-32614 402-32615 402-32616 203611-ASC 203613-ASC 203614-ASC 203615-ASC 203616-ASC DESCRIPTION REPLACEMENT COMPONENTS FOR STUD/HUB BRUSH KIT Plastic Hub/Stud Tool & Adapter 4-Pack of Replacement 14mm Stud Brushes 4-Pack of Replacement 22mm Stud Brushes 4-Pack of Replacement Passenger Hub Brushes 4-Pack of Replacement Truck Hub Brushes ASCOT NO. MFG. NO. 402-32610 DESCRIPTION 203610-ASC Stud/Hub Brush Kit PARTS INCLUDED SBCT22 with a SBR22 brush Safety glasses 2 adapters ASCOT NO. MFG. NO. 402-01322 DESCRIPTION SKT-1322 Stud Cleaning Kit KIT CONTENTS PARTS INCLUDED 2 hex keys REPLACEMENT BRUSHES: SBR 12,13,14,16, 18, 20 and 22mm 402-32615 • Quickly and effec and corrosion from wheel s • Manufactured fr one single piece of anodized aluminum for increased durability • Designed for use with Auto, Light Truck, SUV, Utility Trailers, Commercial Truck and Bus applications • Contains everything you need to clean a wide variety of wheels in one handy kit WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL SERVICE PRODUCTS

110 WHEEL SERVICE PRODUCTS WHEEL HUB GRINDER • Special grinder for cleaning the wheel centering device as well as the attachment area between the wheel and hub • Burned in corrosion residues are completely removed in a quick and easy process • Actual cleaning time per hub only takes between 3-25 seconds depending upon residue thickness • Replacemen Discs Available QUICKLY REMOVES RUST 402-43351 INNER RIM CLEANER AND REPLACEMENT DISCS • Meant for the optimal cleaning of the inner wheel contact surface • Prevents corrosion related distortion of wheel bolt tightening torque • Allows for the complete removal of burnt in corrosion • Used only on the inside of an aluminum rim • Velcro adhesive makes it easy to change out replacement discs • 75mm diameter in size • REPLACEMENT DISCS AVAILABLE: 3 per box 402-43352 402-43358 ASCOT NO. MFG. NO. 402-43357 402-43358 433 507 433 508 DESCRIPTION Inner Rim Cleaner Replacement Discs (3 per Box) 3M BRAKE HUB CLEANING DISCS • Extremely tough three-dimensional web • Non-metallic attachmen and disc pad holder • Roloc disc lock securely; 1/2 turn on, 1/2 turn off • Ideal for use on right angle air t • KIT CONTAINS: 5 Scotch-Brite R Brake Hub Cleaning Discs and 1 3M Brake Hub Cleaning Disc Holder Wheel Hub Grinder in action. ASCOT NO. MFG. NO. 402-43352 402-43351 DESCRIPTION 433 502/M Wheel Hub Grinder 433 501 Grinder Replacement Discs (3 per package) ASCOT NO. MFG. NO. 402-07545 402-07546 07545 07546 402-07547 07547 DESCRIPTION 3M Brake Hub Cleaning Disc Holder 3M Scotch-Brite Roloc Brake Hub Cleaning Discs - 10 Discs 3M Scotch-Brite Roloc Brake Hub Cleaning Disc Kit BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL SERVICE PRODUCTS

111 Bottle Jacks Service Jacks Jack Stands Specialty Jacks Transmission Jacks Wheel Dollies Vehicle Stands & Accessories Shop Cranes WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

27036 27035 3 ½ TON MAGIC LIFT™ SERVICE JACK 3 ½ TON MAGIC LIFT™ SERVICE JACK HYDRAULIC BOTTLE JACK 18204C 20 TON AIR/MANUAL 32225B 92100 22 TON PIN STYLE JACK STANDS 100 LBS WHEEL ARM™ COMPLETE SHOP SOLUTIONS tion go t arnings.go

LIFTING EQUIPMENT 113 ® PROFESSIONAL LIFTING EQUIPMENT Portable Bottle Jacks 2, 3, 5 AND 8-TON CAPACITY BOTTLE JACKS • For heavy duty truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting, pushing, spreading, bending, pressing, or straightening are required • Two piece zinc plated handle • Prevent rust with “Parkerized” pump piston, ram and extension screw • No leak “Uniweld” construction • 50% safety overload factor • State of the art design reduces repair time • Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances • Lightweight forged base provides more steel only where strength is required • The heavy-duty extension screw and release valve were designed to eliminate parts and reduce the chances of breakage and excessive wear • Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard • Made in Japan 12 AND 20-TON CAPACITY AIR/ HYDRAULIC BOTTLE JACKS • Fast efficient air pump reduces lifting time and has a built-in relief mechanism which preven jack from being used beyond its maximum c • Convenient push button air valve connect in-line filter prevents contaminates from entering the air/hydraulic system • Unique design allows for manual operation when air is not available • Two piece zinc plated handle • Parkerized coating on pump piston, extension screw and extension adapters and chrome coated ram offer protection against rust • Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances • Safety oil by-pass system prevents the ram from being overextended and causing damage to the cylinder • Made in Taiwan HEAVY DUTY ASCOT NO. MFG. NO. 301-76312 301-76320 301-76720 301-76721 76312B 76320B 76720B 76721A 12 20 20 20 10-7/8" 8-1/4" 7-3/4" 19-3/4" 20-1/2" 14-1/2" 11-3/4" 23.5" 23.5" 23.5" 23.5" 12 AND 20-TON CAPACITY BOTTLE JACKS • Contains same features as the 2, 3, 5 and 8-ton capacity bottle jacks • Carrying handles • Made in Japan CAPACITY (TONS) MIN. HEIGHT MAX. HEIGHT 9-15/16" HANDLE LENGTH HEAVY DUTY ASCOT NO. 301-76502 301-76503 301-76505 301-76508 MFG. NO. 76502B 76503B 76505B 76508B CAPACITY (TONS) 2 3 5 8 MIN. HEIGHT MAX. HEIGHT 7-1/8" 14-1/2" 7-1/2" 9-1/16" 9-1/16" 15 19/16" 18-7/8" 18-3/4" LIFTING HANDLE No No No Yes ASCOT NO. MFG. NO. 301-76412 301-76512 301-76520 301-76820 76412B 76512B 76520B 76820B CAPACITY (TONS) 12-1/2 12-1/2 22 22 MIN. HEIGHT MAX. HEIGHT 9-7/16" 6-11/16" 10-13/16" 8-1/4" 18-7/8" 13-3/16" 20-3/16" 14-15/16" LIFTING HANDLE Yes Yes Yes Yes WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

114 LIFTING EQUIPMENT Portable Bottle Jacks (cont.) ® PROFESSIONAL LIFTING EQUIPMENT 35 AND 60-TON CAPACITY BOTTLE JACKS • For heavy duty truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting, pushing, spreading, bending, pressing, or straightening are required • Two piece zinc plated handle • Prevent rust with “Parkerized” pump piston, ram and extension screw • No leak “Uniweld” construction • 50% safety overload factor • State of the art design reduces repair time • Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances • Lightweight forged base provides more steel only where strength is required • The heavy-duty release valve was designed to eliminate parts and reduce the chances of breakage and excessive wear • Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard • Made in Japan 12 AND 22-TON CAPACITY LOW FORGED STEEL BASE BOTTLE JACKS • Welded steel construction throughout - reduces metal fatigue allowing for longer use life • Unique base forging method increases resistance to high pressure and gives a degree of durability • Special type of steel resists rust • Needle valve allows for controlled lowering of the ram • Casing, cylinder and base are joined by electric welding for greater strength and are leak proof • Heat treated extension screw provides low pickup height adjustment, maximum lift height and extra strength HEAVY DUTY WELDED STEEL HEAVY DUTY 301-02200 TWO-PIECE ZINC PLATED HANDLE 301-02201 301-01220 301-76535 ASCOT NO. 301-01220 301-02200 301-76560 ASCOT NO. MFG. NO. 301-76535 301-76560 76535 76560 CAPACITY 35-Ton 60-Ton MIN. HEIGHT MAX. HEIGHT 17-5/16" 11" 12" 18-11/16" LIFTING HANDLE Yes Yes 301-01201 301-02201 ZNB-12 12-Ton 6-3/4" ZNB-22 22-Ton 7-1/8" MFG. NO. MIN. CAP. HEIGHT MAX. HEIGHT STANDARD ZN-12 12-Ton 9-1/2" 18-1/2" 5-7/8" 3-1/8" ZN-22 22-Ton 10-5/8" 20-1/8" 6-1/4" 3-1/4" LOW 13-3/8" 3-3/4" 12" 3" 3-3/8" 1-1/2" 4-1/8" x 6-1/2" 5 x 7-1/8" 15 lb. 27 lb. 4-1/8" x 6-1/2" 5" x 7-1/8" 18 lb. 30 lb. RAM LIFT SCREW EXT. BASE SIZE SHIP WT. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 115 12 & 20-TON IN-LINE WELDED BOTTLE JACKS WELDED • Welded cylinder and reservoir for added strength and durability • Chrome plated rams to resist rust and wear • Built-in by-pass device to protect hydraulic system from over pumping damage 301-61124 301-61200 CYLINDER & RESERVOIR 301-61120 ASCOT NO. MFG. NO. 301-61120 301-61124 301-61200 61120 61124 61200 CAPACITY 12 Tons 12 Tons 20 Tons MIN. HT. MAX HT. 9-3/8" 6-3/4" 10-1/2" 18-5/8" 13-3/8" 20-1/2" HANDLE LENGTH OVERALL LENGTH OVERALL WIDTH 18-7/8" 18-7/8" 18-7/8" 6-1/2" 6-1/2" 7-1/2" 4-3/8" 4-3/8" 5-1/8" SADDLE DIAMETER SHIPPING WT. 1-1/2" 1-1/2" 1-3/4" 18.9 lb. 15.4 lb. 28.1 lb. 20-TON AIR/HYDRAULIC SHORTY BOTTLE JACK • Welded cylinder and reservoir for added strength and durability • Chrome-plated rams to resist rust and wear • Built-in bypass device to protect hydraulic system from over-pumping damage • Self-returning spring for ease of operation • Built-in muffler to promote quiet operation • Built-in in-line air filter for extended motor life • High speed turbo motor for efficient, effortless operation • ¼" quick connect feature allows for ease of mobility and remote operation BUILT-IN BYPASS DEVICE AIR/ HYDRAULIC ASCOT NO. MFG. NO. 301-61207 61207 CAPACITY 20 Tons MIN. HT. MAX. HT. 8-1/4" 15/1/2" HANDLE LENGTH OVERALL LENGTH OVERALL WIDTH 18-7/8" 9-1/4" 6-7/8" SADDLE DIAMETER 1-3/4" SHIPPING WT. 34 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

116 LIFTING EQUIPMENT Portable Bottle Jacks (cont.) HYDRAULIC AIR-ACTUATED BOTTLE JACKS • Effortless air operation will greatly reduce operator fatigue and speed up the efficiency of garage work • All air bottle jacks come with chrome plated rams • A compact, yet powerful Air Turbo • The motor is equipped to raise the load to the desired height efficiently, effortlessly and safely • Versatile “Quick Connector” design provides for easy removal of air hose from air motor allowing compact storage or remote operation HYDRAULIC SIDE PUMP BOTTLE JACKS • Hydraulic system is protected from internal damage by a patented bypass mechanism • Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance • Fabricated from hard-cast steel with heat-treated critical stress areas • Unique cross-type forged release valve assures positive control • A wide, rugged base provides stability and strength ASCOT NO. EFFORTLESS AIR OPERATION CHROME PLATED RAMS 301-10125 301-10129 MIN. MFG. NO. CAP. HEIGHT 10129W 12 6-1/2" 301-10205 10205W 20 9-3/4" MAX. HEIGHT 10125W 12 9-1/2" 18-5/8" 11" HYD. HEIGHT 6" 3" EXT. SCREW 3-1/8" 1-1/2" 18-1/2" 5-1/2" 3" 209W 20 6-5/8" 11-5/8" 300 30-Ton 11" 18" 3 7" 10500 50-Ton 9-1/2" 13-7/8" 4-3/8" 1-3/4" n/a n/a BASE SIZE 6" x 5-3/8" 5-1/4" x 5-1/8" 6-1/8" x 5-7/8" 6" x 6-1/2" 8-1/8" x 6-7/8" 10-3/4" x 7-5/8" 56 103-1/2 14 28 21 WT. (LB.) 18 301-10120 ASCOT NO. 301-18126 301-18204 301-18206 301-18209 301-18302 301-18502 301-18992 MFG. NO. MIN. CAP. 18204C 20-Ton HEIGHT 18126C 12-Ton 9-5/8" 10" MAX. HEIGHT HYD. HEIGHT 18-7/8" 5-1/2" EXT. SCREW 6" 18-3/4" 4-7/8" 3-7/8" 18206C 12-Ton 9-5/8" 19" 18302C 30-Ton 11" 18502 50-Ton 12" 18992 18" 19" 100-Ton 11-7/8" 17-7/8" 5" 7" 7" 6" 6" 18209C 20-Ton 8" 15-1/2" 4-1/8" 3-1/4" N/A n/a n/a BASE SIZE 8" x 5-1/4" 8-1/2" x 7-1/8" 9" x 7" 8-1/2 x 7-1/4" 10-1/4" x 8-1/4" 10-7/8" X 7-3/8" 12-3/4" X 9-3/8" 34 37 37 63 301-10200 10200 134-1/2 220-1/2 301-10208 10208 20-Ton 6-1/2" 11-1/4" 3-1/4" 1-1/2" 20-Ton 9-1/2" 18-5/8" 6" 3-1/4" ASCOT NO. 301-10120 MFG. NO. MIN. CAP. HEIGHT MAX. HEIGHT 10120 12-Ton 9-1/2" 18-5/8" HYD. HEIGHT 6" EXT. SCREW 3-1/8" BASE SIZE 7" x 4-1/4” 7-3/4" x 5-1/4" 7-3/4" x 5" 21 27 WT. (LB.) 19-1/2 WT. (LB.) 27 ULIC IN-LINE ACKS ed extension s low pick-up height t and maximum lift height , rugged base provides stability and strength • Easiest accessible pumping system eliminates off-center pumping force for the most efficient operation • U.S. Patented built-in by-pass device protects hydraulic system from over pumping damage • Unique cross-type forged release valve assures positive control 301-10208 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 117 2 TO 30-TON CAPACITY BOTTLE JACKS • All models have a chrome main ram and a chrome pump piston • The extension screws have a pressed thread • These units can be used horizontally and vertically CHROME PUMP PISTON CHROME MAIN RAM LOW PROFILE AIR B • Low Profile Jack with a 20-Ton capacity • T includes a welded base to prolong service • Comes equipped with a chrome main ram and aluminum air mot guarantee optimum lifetime • Air filter and air regulator connec to a hose included 301-43202 WELDED BASE ASCOT NO. MFG. NO. 301-43202 G432021 CHROME MAIN RAM EXT. CAPACITY 20-Ton MIN. HEIGHT MAX. HEIGHT 5-3/4" 10-5/16" SCREW 1-3/4" 301-41020 301-41040 20-TON AIR/HYDRAULIC BOTTLE JACK • This 20-Ton Capacity jack is one of the toughest in the market • Each unit comes equipped with an air regulator, a chrome ram and welded base so that it will keep on working no matter the job • Each unit is hand-tested before shipping to guarantee maximum reliability 301-41200 MIN. ASCOT NO. MFG. NO. 301-41020 301-41040 301-41060 301-41080 301-41150 301-41200 301-41201 301-41300 G410200 G410400 G410600 G410800 G411500 G412000 G412001 G413000 CAPACITY 2-Ton 4-Ton 6-Ton 8-Ton 15-Ton 20-Ton 20-Ton Short 30-Ton HEIGHT 6-1/4" 7-1/2" 7-3/4" 9" 9-3/4" 9-1/2" 6-1/2" 9-1/2" 301-41300 MAX. HEIGHT 11-3/4" 14-1/2" 14-3/4" 18" 19-1/4" 18-1/2" 11-1/4" 18-1/2" EXT. SCREW 2" 2" 2" 3-1/4" 3-1/4" 3-1/4" 1-1/2" 3" WELDED BASE CHR EXT. ASCOT NO. MFG. NO. 301-43220 G432020 CAPACITY 20-Ton MIN. HEIGHT MAX. HEIGHT 9-3/4" 18-1/2" SCREW 3-1/4" WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

118 LIFTING EQUIPMENT Portable Bottle Jacks (cont.) 20-TON AIR/HYDRAULIC BOTTLE JACK • 90-180 PSI • Factory pre-tested to 150% of rated capacity • Safety bypass system • Dual ram return springs • Saddles are machinehardened steel • Expertly crafted in accordance with the strictest industry standards • Made to ensure the highest level of quality and value MAX. ASCOT NO. MFG. NO. 302-55200 CAPACITY 5520B 20-Ton BASE SIZE 9-1/2" x 6-1/2" MIN. HEIGHT 10-1/2" HEIGHT 20" LIFT 6-1/4" EXTERNAL SCREW WT. (LBS) 3-7/8" 39 lb. JACK PLATES • SIZES AVAILABLE: 12" x 12" x 1" and 18" x 18" x 1" • 100-ton capacity for both sizes • Provides stability to bottle jacks, hydraulic rams, jack stands and cribbing • Non-skid surface • Constructed of engineered thermoplastic material • MADE IN THE USA MADE IN THE USA 12, 20 AND 30-TON CAPACITY SUPER DUTY AIR/HYDRAULIC BOTTLE JACKS • Welded tank and frame for superior strength • Thick base design provides the most stable lifting platform • Dual return springs help provide controlled and easy descent • Shielded release screw prevents accidental lowering • Specially engineered air motor for consistent and reliable operation 309-12121 301-05621 301-05612 309-18181 301-05620 301-05630 ASCOT NO. MFG. NO. 309-12121 D1212 309-18181 D1818 DESCRIPTION 12" x 12" x 1" Jack Plate 18" x 18" x 1" Jack Plate AIR ASCOT NO. MFG. NO. 301-05612 301-05620 301-05621 301-05630 5612SD 5620SD 5621SD 5630SD CAPACITY 12-Ton 20-Ton 20-Ton 30-Ton MIN. HEIGHT 9-23/25" 10-37/100" 7" 10-47/50" MAX. HEIGHT 18-49/50" 20-63/100" 12-3/4" 20-59/100" LIFT 5-91/100" 6-19/50" 3-7/20" 5-91/100" BASE SIZE 8-27/100" x 5-31/100" 5-3/4" x 9" 5-7/10" x 8-27/100" 9-13/20" x 7-9/100" PRESSURE 110-120 PSI 110-120 PSI 110-120 PSI 110-120 PSI AIR INLET FITTING 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT WT. (LBS) 35 45 36 65 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 119 301-14460 TITAN AIR/HYDRAULIC BOTTLE JACKS • Cylinder is welded to the base, assuring strength and eliminating leaks • Chromed pump piston and ram for added rust resistance • Extension screw gives added height when necessary • Super low minimum height for easy access ASCOT NO. MFG. NO. 301-14460 301-14461 301-14475 301-14480 CAP. 14460 20-Ton 14464 20-Ton 14475 30-Ton 14480 50-Ton MIN. HEIGHT MAX. HEIGHT WT. (LB.) 9-3/4" 5/8" 11" 12" 18-1/2" 10' 18" 19" 38 21 60 138 TITAN JACK PLATES • Each unit has non-skid surface to prevent jacks from sliding under wet or oily conditions • When it is necessary to provide a firm foundation, the base of the jack shall be blocked or cribbed • Lightweight and easy to handle ASCOT NO. MFG. NO. 309-14464 309-14465 309-14466 309-14468 309-14472 309-14473 309-14462 309-14463 309-14469 14464 14465 14466 14468 14472 14473 14462 14463 14469 DIMENSIONS 12” x 12” x 1” 12” x 12” x 1.5” 18” x 8” x 3” 24” x 24” x 2” 18” x 18” x 1” 18” x 18” x 1.5” 36” x 36” x 2.5" 36” x 36” x 3” 18” x 18” x 2” CAPACITY 50-Ton 100-Ton 200-Ton 100-Ton 50-Ton 100-Ton 150-Ton 200-Ton 100-Ton WT. (LB.) 5 8 21 24 15 16 118 135 20 NONSURF 309-14466 GRIP-IT SERIES JACK PLATES • New pyramid surface on one side is designed to mate with Super Stacker Cribbing Blocks pyramid surface for secure, exact fit, as well as provide better grip onto uneven terrain in the field • Provides increased stability and gripping surface • Complies with OSHA regulation 29 CFR 1926.305 • CAPACITY: 100 tons • Model 14503 bottom locking plate locks onto Super Stacking Cribbing, helping to secure the load while preventing the release of hazardous energy ASCOT NO. MFG. NO. 309-14500 309-14501 309-24468 309-14503 14501 TYPE 14500 Standard Plate Standard Plate 14468B Standard Plate 14503 Bottom Locking Plate DIMENSIONS CAPACITY WT. (LB.) 12" x 12' x 2" 100-Ton 12" x 24' x 2" 24" x 24' x 2" 27" x 24" x 2" 100-Ton 100-Ton 100-Ton 8.8. 17.8 36.3 38.4 309-14503 Shown with Super Stacker PYRAMID SURFACE ON WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

120 LIFTING EQUIPMENT Service Jacks 20-TON AIR/HYDRAULIC BOTTLE JACKS • Thick jack base provides exceptional support and stability in severe conditions • Quick-connect feature on air valve allows easy disconnect and connection of air hose & more compact storage 22-TON AIR/HYDR • Large air mot quick lifting e • Narrow chas • Comes with thr that cater t 301-20220 302-19150 301-20221 ASCOT NO. MFG. NO. 301-20220 301-20221 302-19150 AS2022 AS2022S AS1915 DESCRIPTION 20-Ton Air/Hydraulic Bottle Jack MIN. HGT. MAX HGT. 10-1/8" 19-7/8" 20-Ton Short Air/Hydraulic Bottle Jack 7" 22-Ton Air/Hydraulic Truck Jack 12-5/8" 10-1/2" 21-1/8" HYD. LIFT RANGE 6-1/2" 3-3/8" 6-1/8" EXTEN. SCREW 3-1/8" 2-3/9" 4-1/2" CHASSIS SIZE N/A N/A N/A SADDLE SIZE HANDLE LENGTH N/A N/A N/A 9-3/8" 9-3/8" 45-1/4" SHIP WT. (LBS) 35.1 30.6 101.9 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 121 HEAVY STEEL FOOT FLOOR JACKS • Double pump design for quick lifting and improved efficiency • Heavy steel construction for maximum durability • Equipped with a foot pedal to allow for hands free positioning CONSTRUCTION PEDAL FOR POSITIONING 302-05602 302-05613 302-05605 302-05614 ASCOT NO. MFG. NO. 302-05601 302-05602 302-05613 302-05605 302-05614 AS5601 AS5602 AS5613 AS5605 AS5614 DESCRIPTION Ascot 2-Ton Low Floor Jack Ascot 2-1/2-Ton Floor Jack Ascot 3-Ton Floor Jack Ascot 3-1/2-Ton Floor Jack Ascot 4-Ton Floor Jack MIN. HGT. MAX HGT. 2-3/4" 24" 3-1/8" 19-3/4" 3-3/8" 24-1/4" 3-3/4" 20-1/2" 4-3/8" 20-1/4" HYD. LIFT RANGE 21-1/4" 16-5/8" 20-7/8" 16-3/4" 16" EXTEN. SCREW N/A N/A N/A N/A N/A CHASSIS SIZE 31.9" x 14" 26.3" x 13.5" 31.4" x 14.4" 27.2" x 14.25" 27.7" x 14.4" SADDLE SIZE 3-7/8" 4-3/8" 3-7/8" 4-1/4" 4-1/4" HANDLE LENGTH 47-7/8" 47-7/8" 47-7/8" 47-7/8" 47-7/8" SHIP WT. (LBS) 102.3 73.7 105.4 100 102.5 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

122 LIFTING EQUIPMENT RPG 3.5-TON SERVICE JACK 302-62035 • Quick-lift dual-pump design makes it easy to reach the lifting point under your car • Safety bypass system for cylinder protection • Industrial grade casters for easier transportation • Double pump piston to decrease required strokes needed to reach chassis • Sturdy, one-piece handle • Foam handle for vehicle protection • Bolt-on reinforced and heavy duty lift arm axle • Heavy duty chassis for increased strength and durability • Universal joint mechanism • Protective saddle pad to prevent damage to the vehicle SERVICE JACK SPECIFICATIONS ASCOT NO. 302-62035 MFG. NO. 62035 CAPACITY (TONS) 3-1/2 MIN. HEIGHT / MAX. HEIGHT 3-3/4" / 21-3/4" HANDLE LENGTH 50-1/2" OVERALL LENGTH 31-1/8" OVERALL WIDTH 15-1/2" SADDLE DIAMETER 4-3/4" SHIPPING WEIGHT 104.5 lb. MAGIC LIFT™ SERVICE JACKS & LONG CHASSIS SERVICE JACKS 302-27036 • Innovative design of Magic Lift offers a quicker lift for professional performance • Metered release system allows for precise load control • After the first pump reaches the lifting point, the jack continues with extraordinary lifting speed to raise the load to the desired height • Heavy gauge construction with rugged universal joint release valve for professional performance • U.S. Patented built-in by-pass device protects hydraulic system from over pumping damage • 27025, 27036 & 25036 come with a one-piece handle SERVICE JACK SPECIFICATIONS ASCOT NO. 302-25057 302-25055 302-27035 302-27036 MFG. NO. 25057 25055 27035 27036 ! CAUTION BUYER'S GUIDE CAPACITY (TONS) 5 2-1/2 3-1/2 3-1/2 MIN. HEIGHT/ MAX. HEIGHT 6-3/8" / 21-1/2" 3-1/2" / 20" 4" / 21-5/8” 4" / 21-5/8” HANDLE LENGTH 47-1/4" 45-1/2" 50" 50" SADDLE DIAM. 5-7/8" 4-1/2" 4-3/4" 4-3/4" JACK SIZE 52-5/8" x 18-3/8” 13-1/4" x 26-1/2" 30-7/8" x 14-7/8” 30-7/8" x 14-7/8” Service jacks are for lifting vehicles only. Support the vehicle with vehicle stands immediately after lifting. Do not move or dolly the vehicle with the jack. Use only on a hard level surface. Always follow the instructions accompanying the product for safe and proper use. JACK HGT. WEIGHT (LB.) 7-1/4" 6-1/8" 7-1/4" 7-1/4" 205 70 106.5 106.5 ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 123 3-TON ALUMINUM SERVICE JACK • All aluminum structure provides strength and stability • Side frame handles allow for easy carrying • Extra wide wheels designed for ALL ALUMINUM STRUCTURE 1-1/2-TON HYDRAULIC LOW PROFILE MAGIC LIFT SERVICE JACK • Extra long low side frames designed for long reach under the car chassis • Innovative design of Magic Lift offers a quick lift for professional performance y under trol ther plug 302-29013 302-26030 SERVICE JACK SPECIFICATIONS ASCOT NO. 302-26030 302-29013 MFG. NO. 26030 29013E CAPACITY (TONS) 3 1/1/2002 MIN. HEIGHT/ MAX. HEIGHT 4" / 18-1/8" 2- 1/2" / 19- 7/8" HANDLE LENGTH 47-3/4" 52- 1/4" SADDLE DIAM. 4-1/2" 5.00" JACK SIZE 26" x 13-1/4 49 -1/2" X 15 - 3/4" JACK HGT. WEIGHT (LB.) 6-1/4" 64 7 - 1/4" 150 2-TON LOW-RIDER FLOOR JACKS • Super low pickup height of 2-3/4" • Equipped with a double pump design to increase speed without compromising performance • Universal joint technology and precision release valve for a more controlled release • Safety valve prevents overload • Tough UV powder coated frame for greater protection and durability • Pinned steel saddle (1" stud) with rubber pad for added vehicle protection and durability • One-piece foam covered 50" handle for ease of positioning, pumping and storage 3.5-TON CAPACITY PR HEAVY DUTY FLOOR J • Pinned steel saddle (1-1/8" stud) with rubber pad for added vehicle protection • Rear-mounted 2-3/4" swivel casters for ease of maneuverability • One-piece 50-1/4" padded handle parks upright • Handle ships separately • Equipped with a double pump design to increase speed without compromising overall performance of the jack • Second volume pump assists in getting the saddle to load much quicker than most other single pump designs on the market today 302-00200 FLOOR JACK SPECIFICATIONS ASCOT NO. 302-00200 302-35002 MFG. NO. 200T 350SS CAPACITY (TONS) 2 3-1/2 MIN. HEIGHT / MAX. HEIGHT 2-3/4" / 20" 4" / 19-1/2” LENGTH 27" 29" WIDTH REAR) WEIGHT (LB.) 99 15" 15" 120 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

124 LIFTING EQUIPMENT Service Jacks (cont.) 2 AND 3-TON SERVICE JACKS • One-piece handle • Flanged side plates increase strength • In-line pump provides efficient pumping operation • Full swivel rear casters for easy positioning • Sealed hydraulic pump for durability • Pressure relief valve prevents overloading • Cast iron lift arm for heavy duty loads • U-joint release mechanism for precise load control • 2 Year Warranty 4 AND 10-TON LONG CHASSIS SERVICE JACKS • Dual piston action provides speed to contact and power to lift • Long chassis for hard to reach points • Handle adjusts to three pumping positions • Heavy gauge, steel frame helps prevent distortion • “T” handle with release knob for exact positioning of load • 2 Year Warranty ONE-PIECE HANDLE DUAL PISTON ACTION CAST IRON LIFT ARM LONG CHASSIS T-HANDLE WITH RELEASE KNOB MADE IN THE 302-93642 USA 302-93662 302-93652 SERVICE JACK SPECIFICATIONS ASCOT NO. MFG. NO. 302-93642 302-93652 302-93657 302-93667 302-93660 302-93662 CAPACITY (TONS) HW93642 HW93652 HW93657 HW93667 HW93660 HW93662 2 3 4 4 10 10 MIN. HEIGHT / MAX. HEIGHT POWER RAISE 4 -1/2" / 20" 5-1/4" / 23-1/2" 5-1/2" / 26-1/2" 5-1/2" / 26-1/2" 6-1/2" / 25-1/2" 6-1/2" / 25-1/2" 15-1/2" 18-1/2" 21" 21" 19" 19" SADDLE DIAM. 6 -1/4" 6 -3/4" 7" 7" 8-1/2" 8-1/2" HANDLE LENGTH 48" 48" 51-3/4" 51-3/4" 53" 53" CHASSIS SIZE / HEIGHT 28-1/2" x 15" / 6-3/4" 31-1/2" x 15" / 7-14" 48" x 14-1/2"/8" 48" x 14-1/2"/8" 54" x 20-1/2"/9-1/2" 54" x 20-1/2"/9-1/2" WT. (LB.) 99 123 222 237 420 430 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 125 GT3.0 GARAGE JACK GARAGE JACKS • This 3-ton high-quality jack is designed to offer maximum performance with a sleek and professional look • Low profile • Fast reach foot pedal • Double Piston Fast Lift Technology • Nylon wheels • Controlled descent • The professional universal joint release valve makes it possible to lower the jack with load very precisely • The pump piston (protected with jacket to prevent from intrusion of dirt) is placed at a 45° angle so a complete pumping stroke will always be utilized • The jack has a chrome main ram UNIVERSAL JOINT RELEASE VALVE CONTROLLED DESCENT CHROME MAIN RAM 302-42030 LOW PROFILE 302-42032 302-42225 ASCOT NO. MFG. NO. 302-42003 G420330 302-48301 302-42021 302-42025 302-42030 ASCOT NO. MFG. NO. 302-48301 GT3.0 CAPACITY (TONS) 3-Ton Turbo Lifter Garage Jack MIN. HGT. / MAX. HGT. 3-3/4" x 20" WT. (LB.) 95 302-42250 G422500 302-42031 302-42032 302-42033 302-42225 G420251 G420250 G420300 G420331 G420302 G420303 G420225 CAPACITY (TONS) 3-Ton Turbo Lifter Garage Jack 2-Ton 3-Ton Fast Lift (Double Piston) 3-Ton 3-Ton (Economic) 3.3-Ton (Turbo Lifter) 2.25-Ton Long Chassis (Low Profile) 2.5-Ton (Low Profile) MIN. HGT. / MAX. HGT. 4-3/4" / 17-3/4" 2-15/16" / 20-1/16 " 2-Ton (Low Profile) 2-15/16" / 20-1/16 " 4" / 19-1/2" 4-3/4" / 17-3/4" 5" / 19-1/2" 5-1/8" / 19-5/16" 3-1/2" / 20-1/4" 3-1/4" / 18-1/2" WT. (LB.) 75 75 75 110 75 94 94 124 104 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

126 LIFTING EQUIPMENT ® PROFESSIONAL LIFTING EQUIPMENT Service Jacks (cont.) 2, 3, 5, 10 & 20-TON CAPACITY FLOOR SERVICE JACKS • Steel hydraulic block assembly includes dust seals to prevent oil contamination • 5, 10 & 20-ton capacity jacks have one-pump to load feature • Long, removable two-piece handle • Safety bypass system protects cylinder • Safety overload system prevents jack from being used beyond rated capacity • 5, 10 and 20-ton floor jacks feature a US patented one pump to load ability, reducing lift time dramatically. 71202A takes 10 pumps to full rise under load • 71202A features nylon wheels t 20-TON CAPACITY AIR OPERATED HYDRAULIC FLOOR JACKS • Intended for heavy duty truck, agricultural and heavy construction equipment • Designed for use on mobile service trucks • Perfect for roadside service • Long handle with 45-1/2” reach helps in positioning of jack under vehicles with low overhang • Removable handle for shipment or storage • Hand grip also works as a stand to store the jack in a vertical position • Compact design fits easily between tandem wheels • Fast efficient air pump reduces lifting time and has a built-in relief mechanism which prevents the jack from being used beyond its maximum capacity • Made in Taiwan STEEL 302-72091 HYDRAULIC BLOCK ASSEMBLY 302-71500 CAP. ASCOT NO. MFG. NO. 302-71000 302-71100* 302-71203 302-71233 302-71331 302-71335 302-71500 302-71550* 302-72220 302-72230* 71000D 71100A 71203 71233A 71331 71335 71500G 71550G (TONS) MIN. HGT. / MAX. HGT. 6-1/2" / 27-1/4" 6-1/2" / 27-1/4" 3" / 19-3/4" 2-3/4" / 20" 3" / 19-3/4" 4" / 21-3/8" 10 10 3 2 3 3-1/2 5 5 72220A 20 72230A 20 6-1/4" / 27-1/4" 6-1/4" / 26-1/4" 6-1/2" / 26-1/4" 6-1/2" / 26-1/4" HANDLE LENGTH WT. (LB.) 46-3/4" 455 46-3/4" 466 44-5/8" 50-1/4" 44-5/8" 48" 71 92 71 42-1/2" 45" 45" 45" 106 119 270 650 670 ASCOT NO. MFG. NO. 302-72081 302-72091 72080A 72090A CAPACITY (TONS) 20 20 MIN. HEIGHT / MAX. HEIGHT WT. (LB.) 11-1/8" x 28-5/8" 8-5/5" x 22-3/4" 70 63 HEAVY DUTY REMOVABLE HANDLE * 302-71100, 302-71550 and 302-72230 have Air Hydraulic Features BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 127 5, 10 AND 20-TON CAPACITY LONG CHASSIS SERVICE JACKS • Ideal for lifting hea construction equipmen • Heavy gauge twisting • Foo to load point • 2205 HEAVY DUTY HEAVY GAUGE, STURDY FRAME CAP. ASCOT NO. MFG. NO. 302-22050 302-22051 302-22100 302-22101 302-22201 22050C 22051C 22100C 22101C 22201 DESCRIPTION Long Chassis Service Jack Long Chassis Service Jack with Air Heavy Duty Hydraulic Service Jack Heavy Duty Air Actuated Service Jack Long Chassis Service Jack (TONS) 5 5 10 10 20 MIN. HEIGHT / MAX. HEIGHT 7-1/4" / 27-1/4" 7" / 27" 6-7/8" / 27-1/2" 6-3/4" / 27-1/4" 7-1/2" / 26" HANDLE LENGTH 46" 47-1/4" 43" 47-1/4" 48-1/2" SADDLE DIAM. 6-1/2" 5-7/8" 7-1/4" 7-1/4" 6" JACK SIZE / HEIGHT WT. (LB.) 55-1/2" x 18" X 18" 56-1/2" x 18-1/4" x8" 57-3/4" x 20" x 10" 55" x 19” x 10" 58-1/2" x 20" x 38" x 12" 259 248 427 432 543 HANDLE PROTECTORS • Made of a durable synthetic rubber • Fits multiple jack manufacturers’ handles and popular tire tools • Unique design ensures a tight fit on jack/tool handle without slippage • Protects vehicles from scratches or dents caused by falling jack handles and unstable tools in the shop • Patent Pending design absorbs the dent/scratch-causing force as the handle contacts an adjacent vehicle DURABLE SYNTHETIC RUBBER ASCOT NO. MFG. NO. 448-01101 448-01102 448-01103 DESCRIPTION GHP-01 B GHP-01 Y GHP-01 R Black Handle Protector Yellow Handle Protector Red Handle Protector 448-01101 448-01102 448-01103 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

128 LIFTING EQUIPMENT Service Jacks (cont.) 20-TON TRUCK JACKS 302-93731 • Patented “Speed Pak” provides effortless lift • Large rubber wheels enhance mobility • Automatic valve prevents overloading • Extension screw permits pickup height adjustment • 2 Year Warranty CAP. ASCOT NO. MFG. NO. 302-93731 HW93731 (TONS) 20 MIN. / MAX. HEIGHT 9-1/4" / 17-3/4" POWER RAISE 5-1/2" HANDLE LENGTH 39-1/2" EXT. BASE SIZE 8-3/4" x 5-1/2" SCREW 2-1/2" OPERATING PRESSURE WT. (LB.) 110-150 PSI 69 20-TON CAPACITY AIR/HYDRAULIC SERVICE JACKS • Compact, powerful design quickly lifts rated capacity • Large 8” rubber wheels • Low height allows lifting from axle or suspension • Pressure relief valve prevents overloading • Rapid two-speed air hydraulic action quickly advances ram to load • Chrome plated plunger for extended jack life • Optional height adapters HW93265 • 2 Year Warranty LARGE RUBBER WHEELS CAP. ASCOT NO. MFG. NO. 302-93733 (TONS) HW93733 20 MIN. / MAX. HEIGHT 9" /19-3/4" POWER RAISE 6" HANDLE LENGTH 52-1/2" EXT. BASE SIZE 8" x 17" SCREW 4-3/4" OPER PRES 110-140 PSI 302-93733 20-TON AIR/HYDRAULIC SERVICE JACKS WITH CART • Unit includes a welded base to prolong service • Chrome main ram and aluminium air mot guarantee optimum lifetime • Air filter, connected to hose, included • C ASCOT NO. MFG. NO. CAP. (TONS) 302-43202 G432003 20 MIN. / MAX. HEIGHT 10" / 18-1/ 20-TON TRUCK RAMPS • Specifically designed for heavy-duty tasks • 33” Long T-handle increases mobile efficiency • Sold in set of t 302-93200 HEAVY DUTY LONG T-HANDLE ASCOT NO. MFG. NO. CAP. (TONS) 302-93200 93200 20 FRAME SIZE WHEEL DIAM. HANDLE LENGTH WT. (LB.) 13-1/2" x 45” 5" 33-3/4" 267 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 129 24-TON CAPACITY SERVICE JACK • This single stage air service jack delivers 24 Tons of lifting power • It is designed to meet and exceed the expectations of a quality jack at a very competitive price • The G432024 comes equipped with an extension screw, individual extension pegs, and heavy duty wheels designed for daily use ASCOT NO. MFG. NO. 302-43222 DESCRIPTION G432024 24-Ton Service Jack TITAN 22-TON AIR/HYDRAULIC SERVICE J • Air operated and easy to maneuver • Single piece handle - will not break • Ex saddles include: (1 of each) 1", 2" & 4" • Operates with only 80 PSI of air pr ASCOT NO. MFG. NO. CAP. (TONS) MIN. HGT. 302-14140 14140 22 9" STROKE LENGTH WT. (LB.) 6" 90 HANDLE 22-TON AIR/HYDRAULIC TRUCK JACK • Large air motor provides an exceptional quick lifting experience • Narrow chassis fits between tandem truck wheels • Comes with three adapters in different sizes that cater to different working requirements ASCOT NO. MFG. NO. 302-19150 AS1915 DESCRIPTION 22-Ton Air/Hydraulic Truck Jack MIN. HGT. MAX HGT. 10-1/2" 21-1/8" HYD. LIFT RANGE 6-1/8" THREE ADAPTERS EXTEN. SCREW 4-1/2" CHASSIS SIZE/HT. N/A SADDLE SIZE HANDLE N/A LENGTH 45-1/4" SHIP WT. (LBS) 101.9 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

130 LIFTING EQUIPMENT ® Service Jacks (cont.) PROFESSIONAL LIFTING EQUIPMENT 22-TON CAPACITY AIR/ HYDRAULIC FLOOR JACK 22-TON CAPACITY AXLE JACK • Heat treated cylinder wall & chromed piston give added stability & longer jack life • Alloy steel lifting mechanism for added durabilit engineered toleranc • ln-line filter to pr • Corrosion-resistan air motor • Ram ex 2-3/4" and 4" extensions • Lar wheels for easy positioning • A oiler to lubricate air mo no need for clevis pins • One-piec • Long “T” handle helps in positioning jack under v obstructions of ground effects • Best seller top mounted at “T” handle and allows for eas handle position • Handle locking lever secur in either vertical, horizontal or 45° position • C design fits easily between tandem wheels • Rus inhibitive coating on ram and extension scr offers longer equipment life • Large diameter wheels for easy maneuverability • Self-retracting ram eliminates manual lowering of jack • Fast operating and extremely durable • Includes 3 adapters of differing heights ASCOT NO. 302-72200 HEA TREATED CYLINDER WALL CHROMED PISTON HYDRAULIC AIR ACTUA SINGLE STAGE TRUCK J • Three handle angles choices for space sa storage, easy carrying move and easy ac point • Large rubber wheels for easy positioning and smooth motion • Sturdy one-piece handle as is standard on all Omega Truck Jacks • Chrome plated rams • Heat-treated extension screw allows low pick-up height adjustment and maximum lift height • U.S. Patented built-in by-pass device protects hydraulic system from over pumping damage 302-23221 ASCOT NO. ASCOT NO. 302-56501 MFG. NO. 565E1 CAP. (TONS) 22 MIN. HGT. / MAX. HGT. RAM LIFT REACH WIDTH 8-3/4" x 21-1/2” 4-3/4" 61" 13" WT. (LB.) 107 302-23301 23301C 30 302-23501 302-23991 23501 50 23991 100 MFG. NO. CAP. (TONS) 302-23221 23221C 22 302-23222 23222C 22 MIN. HGT. / MAX. HGT. 10 / 18.5" 11-1/2" / 18-1/4" 12" / 19" HANDLE LENGTH BASE SIZE 8-1/2" / 17" 47-3/8" 18-1/2" x 12-1/2" EXT. SCREW WT. (LB.) 47-3/8" 22" x 13" 3-7/8" 100 3-7/8" 97 40-7/8" 21-3/4" x 12-3/4" 40-7/8" 22-7/8" X 13-3/4" 12" / 18-1/8" 40-7/8" 26" X 15-3/4" N/A — — 105 174 263 MFG. NO. CAP. (TONS) 72200D 22 MIN. HG MAX. HG 9" / 18” BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 131 25-TON TRUCK JACKS 35-TON CAPACITY SER • Compact, powerful design quickly lifts rated capacity • 8-1/4” low height allows lifting from axle or suspension • Pressure relief valve prevents overloading • Specially coated ram prevents rust and extends jack life • Air assisted ram retract • Carries a very wide hydraulic c wide adaptors to give it stabilit to shift • Solid base makes the ne to operate • Provides a low minimum heigh clearance on vehicles with low suspension • T options this product is able to lift high tr or unloaded without issue • Rec to a minimum of 30,000 lifts without f MADE IN THE USA 302-93735 Includes 3" Extension CA ASCOT NO. MFG. NO. 302-03531 GT-3531 (TONS 35 302-03531 LOW MINIMUM HEIGHT ASCOT NO. CAP. MFG. NO. (TONS) 302-93735 HW93735A 25-Ton MIN. HGT. / MAX. HGT. 8-1/4" / 21-1/2” HANDLE LENGTH 53" BASE SIZE EXT. SCREW 20"x14" 5-1/8" WT. (LB.) 124 22-TON CAPACITY AIR OPER HYDRAULIC FLOOR J • All steel-welded construction built f • Long 50" T-handle for easy positioning of jack under vehicles with low overhang • Quick-lift mechanism allo for substantially shortened ram-lifting time when no load is involved • Spring return for self re screw for fine adjustment beyond ra lifting limit • Built-in safety valve pr rated capacity • Specially processed air pump for low-noise operation 45/20-TON 2-S • Provides an even lower minimum of under 6 get under Buses, RV’s, and Car Hauler regulator and water separa jacks • Solid base makes the ne safe to operate • Long handle and truer balanc it easy to maneuver under a v 302-04532 BUILT-IN AIR REGULATOR 302-00224 CAP. ASCOT NO. MFG. NO. 302-00224 ZATJ-22S-4 (TONS) 22 MIN. HGT. / MAX. HGT. 8" x 15-7/8" FRAME HEIGHT 7-1/4" CYLINDER LIFT EXT. SCREW 4-1/4" 3-5/8" WT. (LB.) 82 ASCOT NO. MFG. NO. 302-04532 GT-4532 CAP. (TONS) 45/20 MIN. HGT. / MAX. HGT. 4-7/8" / 16-1/2" WT. (LB.) 99 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

132 LIFTING EQUIPMENT Service Jacks (cont.) YAK 22/11-TON STANDARD AIR/ HYDRAULIC JACK • Extremely light, compact and efficient • Made up with the best materials on the market • Models 92000 and 92001 represent the technological leading edge of our product range • Included are 0.5" | 12.7 mm and (2) 2.35" | 60 mm Extensions • Stroke: 6.5" • Air Pressure: 116-145 PSI • Min. Height: 5.5", Max. Height: 12.05" • Weight: 38.5 Lbs. MADE IN ITALY ASCOT NO. MFG. NO. DESCRIPTION 302-92000 92000 ASCOT NO. MFG. NO. DESCRIPTION 302-92007 92007 22/11-Ton Standard Air Hy YAK 44/22-TON AIR/ HYDRAULIC HD JACK • Air hydraulic jack for heavy vehicles, practical and easy to handle • The pistons move back automatically; the two descent valves guarantee perfect holding in all situations and controlled speed under load • Ideal for workshops, mobile workshops, tire repairers and bodywork shops • Stroke: 6" • Air Pressure: 116-145 PSI • Min. Height: 8.54", Max. Height: 18.38" • Weight: 101 Lbs. MADE IN ITALY ASCOT NO. MFG. NO. DESCRIPTION 302-92004 92004 YAK 4 STAGE 88/55/28/17TON AIR/HYDRAULIC JACK • Air hydraulic jack for heavy vehicles, practical and effective • The pistons move back automatically the two descent valves guarantee perfect holding in all situations and controlled speed under load • A complete range of jacks for all stroke and capacity requirements • Ideal for workshops, tire repairers and bodywork shops • Stroke: 11" • Air Pressure: 116-145 PSI • Min. Height: 7.09", Max. Height: 18.89" • Weight: 170 Lbs. All Yak Jacks come with a 3-year extended warranty. YAK 3 STAGE 66/33/17-TON AIR/ HYDRAULIC JACK • Air hydraulic jacks with pistons moving back automatically. • Specifically designed for lifting buses and all vehicles with low profile axles • Stroke: 5" • Air Pressure: 116-145 PSI • Min. Height: 5.31", Max. Height: 10.05" • Weight: 110 Lbs. MADE IN ITALY 3 Stage 66/33/17-Ton Air Hydraulic Jack MADE IN ITALY 44/22-Ton Air/Hydraulic HD Jack ASCOT NO. MFG. NO. DESCRIPTION 302-92010 92010 4 Stage 88/55/28/17-Ton Air/Hydraulic Jack BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 133 ® PROFESSIONAL LIFTING EQUIPMENT 44-TON CAPACITY AIR/HYDRAULIC FLOOR JACKS • Designed for heavy duty truck, agricultural and heavy construction equipment • Ideal for loaded truck and trailer roadside service calls • Heavy enough for rail and bus work • 61.75" Long "T" handle helps in positioning jack under vehicles with low overhang • Handle locking lever secures handle in either vertical, horizontal or 45 degree position • Overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE loadlimiting standard • Rust inhibitive coating on rams offers longer life • Integrated filter protects air motor • Double acting pump raises ram more quickly to the load • Suspension loaded axle prevents wheel damage • Vacuum operated ram retraction eliminates manual lowering of jack • Safety button at the top of the handle can be pushed in to immediately stop the jack operation in case of emergency • A double acting pump raises the ram more quickly to the load • Includes a 2-3/4” diameter saddle, 2” and 4” long stackable extensions and extension holder • Made in Italy ASCOT NO. MFG. NO. CAPACITY (TONS) MIN. HEIGHT / MAX. HEIGHT 9-1/4" x 15-5/8" 302-72244 72244 44 PSI RANGE WT. (LB.) 130-175 149 LONG T-HANDLE DOUBLE ACTING PUMP ASCOT NO. MFG. NO. 302-72204 302-72206 72204 72206 DESCRIPTION AVAILABLE ACCESSORIES 4" Extension Adapter 2-3/4" Diameter Lifting Saddle 30, 50 AND 55-TON CAPACITY AIR/ HYDRAULIC TELESCOPIC FLOOR J • Long “T” handle for positioning jack under vehicles with lo • Handle locking lever secures handle in either vertic • Safety overload system prevents cylinder damage • Rus • Integrated filter protects air motor • Double acting pump r to the load • Suspension loaded axle prevents wheel damage • Made in Italy LONG T-HANDLE HANDLE LOCKING LEVER ASCOT NO. MFG. NO. CAP. (TONS) 302-72212 302-72218 302-72225 72212 72218 72225 55 33 50 MIN. HEIGHT / MAX. HEIGHT 5.9" / 15.4” 5.9" / 12.71” 8.7" / 16.6” STROKE 9.5" 7.3" 7.9" CHASSIS SIZE WHEEL DIAM. PSI RANGE WT. (LB.) 8.6" x 39.3” 8.5" x 49.2" 8.6" x 39.3” 7" 8-1/2" 7" 100-175 120-175 120-175 233 106 235 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

134 LIFTING EQUIPMENT Service Jacks (cont.) HIGH TONNAGE JACKS • Load blocking system • Remote control for working safely • Various extensions to suit all operations • All models are hydro-pneumatically operated and equipped with a dual descent valve for greater control when bearing weight and automatic piston return • Can also be fitted with a manual emergency pump (on request) • Made in Italy HIGH TONNAGE JUMBO JACKS • Ideal for giant tire changing, mining, railroads, construction rigging • No need for cribbing - time savings! • Balanced for easy moving • Large pneumatic wheels • Only 23" wide, the jacks fit in tight spots • 50" long, 8 position handle for easy tilt back and moving of the jack • Welded fully enclosed heavy-duty steel frame with built in lifting holes • Hydraulic radial piston pump • Minimum 90 to 150 psi air supply needed to power hydraulic pump • Extension holders bolted to frame for easy storage • Easy to change oil filter • All Jacks come with 5" & 9" extentions & 1" saddle • Made in Canada LOAD BLOCKING SYSTEM LARGE PNEUMATIC WHEELS REMOTE CONTROL HEAVY DUTY STEEL FRAME DUAL DESCENT VALVE 308-10320 302-91000 The High Tonnage Jumbo Jack in use. ASCOT NO. MFG. NO. 302-91000 302-91001 302-91003 302-91004 302-91005 91000 91001 91003 91004 91005 DESCRIPTION High Tonnage Jack High TonnageJack High Tonnage Jack High Tonnage Jack High Tonnage Jack CAPACITY 25/50/80-Ton Stages 30/60-Ton Stages 50/80-Ton Stages 100-Ton 150-Ton ASCOT NO. 308-10320 308-10321 308-10322 308-10323 308-10324 CAP. MFG. NO. 10320 10321 10322 10323 10324 (TONS) 150 150 100 200 250 COLLAPSED POINT 27" 36" 27" 27" 27" STROKE 14-3/8" 22-3/8" 14-3/8" 14-1/2" 14" LIFTING HEIGHT 41-3/8” 58-3/8” 41-3/8” 41-1/2" 41" BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 135 Jack Stands 3, 6 & 12-TON JACK STANDS • Heavy-duty jack stands that are suitable for emergency tire changes, repairs and more • Ratchet height adjustment built within column • Wide base for added stability • Multi-leveled ductile iron ratchet bar adds strength and durability • Sold in pairs of two NOW FEATURING A DOUBLE LOCK SAFETY PIN FOR ADDED SECURITY 10-TON HIGH JACK STANDS (PAIR) • Pin-style stands with supporting range fr to 47.56" suitable for high-height applic • Heavy-duty tubular steel design pr and rigidity • Multiple pin holes to allo adjustment to desired height • Saddle with lugs for easy positioning of the load • Sold and to be used only in pairs PIN-STYLE STANDS 302-63030 22-TON JACK STANDS 302-63060 NOW WITH A DOUBLE LOCK PIN • Used in pairs for supporting trucks, trailers, and equipmen in fleet garages, agricultur industrial and construction environments • Sturdy, w steel construction for exceptional safety and strength • Heavy gauge steel helps prevent distortion or twisting • Wide base for added stability • Multi-position iron column bar for convenient height adjustment • Sold in pairs of two 302-63220 WIDE BASE 302-63120 ASCOT NO. MFG. NO. 302-63221 JACK STAND SPECIFICATIONS ASCOT NO. 302-51005 302-63220 302-63030 302-63060 302-63120 MFG. NO. 510005 63220 63030 63060 63120 CAPACITY (TONS) 10 22 3-Ton 6-Ton 12-Ton BASE SIZE 16-7/32” x 16-7/32” 9-7/8" x 9-7/8" 7-5/8" x 6-7/8" 11" x 9-3/4" 11-3/4" x 10-5/8" MIN. HEIGHT / MAX. HEIGHT 27-61/64" / 47-9/16" 13-3/8" / 19-5/8" 11" / 16-3/8" 15-3/4" / 24-3/8" 17-1/2" / 27-1/2" SHIPPING WEIGHT 123.2 lb. 63.3 lb. 14.9 lb. 32 lb. 56 lb. 63220-1 DESCRIPTION AVAILABLE ACCESSORIES FOR 22-TON JACK STANDS Support Pin for 22-Ton Jack Stands WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

136 LIFTING EQUIPMENT Jack Stands (cont.) NORCO JACK STANDS • Unique spring loaded pawl provides constant locking pressure against lifting column when raising the column to the load - the benefit is that it makes it a one-handed operation • Four legged base with foot pads for added strength and more secure footing • Common machine bolt secures lifting column to stand and provides stability • Recessed column saddle for acceptance of vehicle panel rail • Design qualification tested to 200% of rated capacity • Capacity is per pair SECURE FOOTING 302-81208 ® PROFESSIONAL LIFTING EQUIPMENT 302-81006 302-81012 ASCOT NO. 302-81205 302-81208 302-81209 302-81210 302-81225 302-81004 302-81006 302-81012 302-82205 302-82208 302-82209 302-82210 MFG. NO. 81205 81208 81209 81210 81225 81004C 81006D 81012 81205i 81208i 81209i 81210i CAP. (TONS) 5 10 10 10 25 3 6 12 5 10 10 10 MIN. HGT. / MAX. HGT. 9-1/2" / 15-3/4" 10-1/2" / 17" 18-1/2" / 30" 28" / 47" 12" / 20" IMPORT 12" / 17-1/2” 16-1/4" / 24-7/8” 19-5/8" / 29-3/8” 9-1/2" / 15-3/4" 10-1/2" / 17" 18-1/2" / 30" 28" / 47" 9/16" 5/8" 1-1/4" 3" x 2" 4" x 1-1/2" 7" x 1-1/2" 10" x 2" 1-1/8" x 4-9/16" 1-1/8" x 4-7/8" 1-5/8" x 4-3/4" 3" x 4-1/2" 3" x 5" 3" x 5" 3" x 5" 7-1/2" x 7-7/8" 10-1/16" x 11-1/16" 13" x 15" 9" x 9" 12-1/2" x 12-1/2" 17" x 17" 16" x 16" 19 30 86 38 60 80 106 HEIGHT INTERVALS SADDLE SIZE DOMESTIC 3" x 2" 4" x 1-1/2" 7" x 1-1/2" 10" x 2" 3" x 3" 3" x 4-1/2" 3" x 5" 3" x 5" 3" x 5" 2-1/4" x 3-1/4" 9" x 9" 12-1/2" x 12-1/2" 17" x 17" 16" x 16" 10" x 10" 38 60 80 106 65 BASE SIZE WT./PR (LB.) BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 137 10-TON JACK STANDS 3 AND 6-TON JACK STANDS • Saddle column provides ratchet action height adjustment • Dual purpose handle serves as carry handle and saddle column release • Multi position ratchet bar provides strength and durability • Formed base adds stability and helps reduce sinkage into pavement CAP. ASCOT NO. MFG. NO. 302-93503 HW93503 302-93506 HW93506 (TONS) 3 6 • Ideal for fleet, agricultural and construction maintenance • Heavy duty pin style height adjustment • Wide, square tubing construction and base for maximum load stability • Adjusts from 19-1/2" to 31-1/2" in 2" intervals • Large saddle secures load • Integrated carrying handle • Sold and to be used in pairs • Capacity is per pair HEAVY DUTY MADE IN THE USA 302-93503 302-93506 MIN. HGT. /MAX. HGT. 12-1/8" / 19" 16-1/4" / 25-3/4” HEIGHT INTERVALS 5/8" 5/8" SADDLE SIZE 7-1/2" x 9" 10-1/2" x 13" 7-TON FORKLIFT S • Low profile muscle work f forklifts and heavy machinery • Wide, square base for ma load stability • Adjusts fr to 15-3/4" at 1” intervals • Hea duty holding pins for adjus heights • Lightweight for portability and ease of positioning MADE IN THE USA CAP. ASCOT NO. MFG. NO. 302-93524 HW93524F (TONS) 7 MIN. /MAX. HGT. 12.38" / 20.38" MADE IN THE USA 10-TON PIN-STYLE JACK STAND • Ideal for fleet, agricultural and construction maintenance • Pin style column adjusts in 2" height intervals • Heavy duty square tubing • Large saddle securely supports load • Sold in pairs • Capacity is per pair ASCOT NO. MFG. NO. CAP. (TONS) 302-93511 HW93511 10 MIN. HGT. / MAX. HGT. 30" / 52" BASE SIZE 19" x 19" WT. (LB.) 148 302-32125 32125B 12 302 SADDLE SIZE 2.25" / 3.25" JACK SIZE 9.88" x 9.88" WT. (LB.) 90 ASCOT NO. MFG. NO. 302-93512 HW93512 OFILE CLE ORK CAP. (TONS) MIN. HGT. / MAX. HGT. BASE SIZE 20 "/ 31-1/2" 10 16"x16" WT. (LB.) 90 BASE SIZE 1" x 4-1/2" 1" x 5" WT. (LB.) 18.5 41 302-93512 3, 6 AND 12-TON CAPACITY “RATCHET STYLE” STAND • Counter-weighted pawl serves as a saf locking device to prevent the load from accidentally disengaging • Sturdy, welded steel construction for superior safety and strength • One piece, multi-position ductile r bar provides super strength and dur and quick adjustment mechanism tha securely lock into desired location • Sold and to be used only in pairs • Capacity is per pair ASCOT NO. 302-32038 302-32068 MFG. NO. 32038 32068 CAP. (TONS) 3 6 MIN. HGT. / MAX. HGT. 11-38" / 16.75" 16.00" / 23.50" 19.63" / 29.88" SADDLE SIZE 3.00" / 1.00" 3.75" x 1.00" 5.13" x 1.75" WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BASE SIZE 7.63" x 6.88" 10.50" x 8.88" 12.38" x 12.50" WT. (LB.) 13.9 27.5 42.1 BUYER'S GUIDE LIFTING EQUIPMENT

138 LIFTING EQUIPMENT Jack Stands (cont.) 9-TON CAPACITY JACK STANDS • Ideal for Forklift Trucks • Sturdy, welded steel construction • Heavy gauge steel frame prevents distortion or twisting • Sold in pairs 12-TON JACK STAND WITH PIN AND WHEELS • All stands have a heavy dut robot welded frame, and a multi-position ductile ratche bar • The quick adjustment mechanism securely locks in the right location • Includes counter-weighted pawl for saf securing • Capacity is per stand STURDY, WELDED STEEL ASCOT NO. MFG. NO. CAP. (TONS) MIN. HGT. / MAX. HGT. WT. (LB.) 302-14360 14360 9 9-1/2" / 16-1/2" 25 HD ROBOT WELDED FRAME 10 AND 22-TON CAPACITY PIN-STYLE JACK STANDS • Sturdy, welded steel construction for superior safety and strength • Heavy gauge, steel frame helps prevent distortion or twisting • Sold and to be used only in pairs • Capacity is per pair COUNTERWEIGHTED PAWL STURDY, WELDED STEEL CAP. ASCOT NO. MFG. NO. 302-32105 32105B 302-32107 302-32225 (TONS) 10 32107B 10 32225B 22 MIN. HGT. / MAX. HGT. 18-5/8" / 31-1/8" 28" / 47-5/8" 12" / 19-5/8" SADDLE SIZE BASE SIZE 3-1/8" x 5" 3-3/8" x 5" 3-1/8" x 2-3/4" 16-1/8" x 15-5/8" 16-1/4" x 46-1/4" 9-7/8" / 9-7/8" WT. (LB.) 84 109 66 CAP. ASCOT NO. MFG. NO. 302-45125 G451205 (TONS) MIN. HGT. / MAX. HGT. BASE SIZE 11-4/5" / 18-1/10" 12 19"x19" WT. (LB.) 144 302-45125 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 139 MADE IN THE USA 20-TON SCREW STYLE JACK STAND • Screw-style stand makes it easy to hold load at desired height and secure with locking collar • Adjustable screw for height extension and retraction • Heavy duty design and application SCREW STYLE HEAVY DUTY SQUARE TUBING 302-93526 CAP. ASCOT NO. MFG. NO. 302-10802 302-10803 10802 10803 (TONS) 20 20 MIN. HGT. / MAX. HGT. 16.5" x 26.5" 26" x 46" BASE THICKNESS BASE SIZE 1/4" 1/4" 13" x 13" 13" x 13" WT. (LB.) CAP. 65 82 ASCOT NO. MFG. NO. (TONS) 302-93526 HW93526F 25 MIN. HGT. / MAX. HGT. 12-3/8" / 20-3/8" HEIGHT INTERVALS 2-1/8" BASE SIZE 10" x 10" WT. (LB.) 90 302-10803 25-TON HEAVY DUTY JACK STAND • Ideal for fleet, agricultural, and construction maintenance • Pin style column adjusts in 1-1/2" heigh intervals • Heavy duty square tubing • Large saddle securely supports load • Sold in pairs ® USA & PROFESSIONAL LIFTING EQUIPMENT IMPORTED MODELS AVAILABLE 25-TON CAPACITY JACK STANDS • Intended for fleet and maintenance garages wher profile stands are used to support loaded trailers • Pin-type support column adjusts to four diff height positions • Adjustmen pin is secured to stand to prevent loss • Handle provides ease of positioning and carrying • 3/8” thick solid steel base plate for stability 20-TON CAPACITY HEAVY DUTY JACK STANDS • Sturdy, welded steel construction for superior safety and strength • Heavy gauge, steel frame helps prevent distortion or twisting • Sold in pairs • Capacity is per pair HEAVY GAUGE STEEL FRAME 302-81225 ASCOT NO. MFG. NO. CAP. DESC. 302-81225 81225 US (TONS) 25 302-82225 81225i Import 25 MIN. HGT. / MAX. HGT. HEIGHT INTERVALS 12" / 20" 3" x 3" 12" / 20" 3" x 3" SADDLE SIZE 2-1/4" x 3-1/4" 2-1/4" x 3-1/4" BASE SIZE 10" x 10" 10" x 10" WT. (LB.) 2-14400 65 65 ASCOT NO. MFG. NO. CAP. (TONS) MIN. HGT. / MAX. HGT. WT. (LB.) 302-14400 14400 20 12" / 20" 72 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

140 LIFTING EQUIPMENT ® PROFESSIONAL LIFTING EQUIPMENT Specialty Jack 4-TON CAPACITY FORKLIFT JA • Two-position saddle at scissors end can be quickly r edges or flat surfaces of a load • 2-1/4" low lift heigh removable handle for ease of pumping and stor “fingertip control” release knob provides slow, c • Safety bypass and overload systems prevent c the jack from being used beyond the ASME/PASE load-limiting s 10-TON CAPACITY AIR LIFT JACK TWO POSITION SADDLE AT SCISSORS END TWOPOSITION SADDLE • Designed for use in truck and farm equipment dealer garages, heavy duty construction repair shops and bus company garages • Three-way heavy duty air valve provides fine control when lifting or lowering a vehicle • Automatic safety lock engages in six different height positions independent of air pressure • Designed for lifting entire front or rear of a vehicle • Front swivel caster wheel and two 12-1/4" diameter pneumatic rear tires provide easy maneuverability • Adjustable lifting saddles can be raised and extended to desired position Lifts at edge Lifts flat surfaces 3-WAY ASCOT NO. MFG. NO. CAP. (TONS) MIN. HGT. / MAX. HGT. OVERALL LENGTH OVERALL WIDTH 2-1/4" / 16-1/4" 302-72036 72036D 4 26-1/8" 8-3/4" WT. (LB.) 75 ADJUSTABLE LIFTING 10 AND 15-TON CAPACITY PORTABLE AIR LIFT JACKS t 3-WAY HEAVY DUTY AIR VALVE 308-82999 ASCOT NO. CAP. ASCOT NO. MFG. NO. 308-82990 308-82992 (TONS) 82990C 10 82992 15 MIN. HGT. / MAX. HGT. 17-3/4" / 49-3/8" 18-1/8" / 51-3/8" OVERALL LENGTH 58" 59-1/2" OVERALL WIDTH 13-5/8" 15" OVERALL HEIGHT STROKE 17-3/4" 18-1/8" 11-1/2" 11-1/4" WT. (LB.) 178 279 MFG. NO. CAP. (TONS) 308-83999 83999i 10 MIN. HGT. / MAX. HGT. 308-82999 82999 10 12-1/2" / 50" 12-1/4" / 49-1/2" MIN. PSI FOR RATED LOAD 200 WT. (LB.) 638 200 817 SADDLES HEAVY DUTY AIR VALVE BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 141 4-TON CAPACITY FORKLIFT JACK 10-TON AIR JACK AND SUPPORT STAND • Dual lift points for various lifting applications: The lower point is for forklift truck lifts and the higher point is for most farm equipment lifts • Precision control of lifting and lowering functions • Operates as both a support stand and air actuated jack • Completely air operated and has a heavy duty pin locking system • Comes with a 10 foot air hose and maneuverable wheel base for easy accurate positioning • A total lift range of 17-1/2" to 51" makes it a very versatile and helpful piece of equipment DUAL LIFT POINTS ASCOT NO. MFG. NO. CAP. (TONS) MIN. HGT. / MAX. HGT. HYDRAULIC HEIGHT BASE SIZE 17-1/2" / 51-1/8" 308-34100 34100 10 Ton 11-1/2" 22" X 12" WT. (LB.) 189 302-28045 ON FLOOR FORKLIFT JACK • Specially designed seals and strong steel tion • Low pick up height • Removable handle and compact size • 2 Year Warranty MADE IN THE USA ASCOT NO. MFG. NO. 302-28045 28045 CAP. (TONS) 4 MIN. HGT. / MAX. HGT. 3" / 17-1/2" WT. (LB.) 91 302-93659 STRONG STEEL DESIGN CAP. ASCOT NO. MFG. NO. 302-93659 HW93659 (TONS) 4 MIN. HGT./MAX. HGT. 2-1/2" / 16-1/2" POWER RAISE 14" HANDLE LENGTH 25" BASE SIZE 8" x 26-1/2" WT. (LB.) 71 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

142 LIFTING EQUIPMENT Specialty Jacks (cont.) TJ-110 10-TON CAPACITY LIFT JACK • Doubles as a support stand • HW93737A has a removable handle and 10 foot air hose for safe position and operation • Completely air-operated • 2 Year Warranty MADE IN THE USA LIFTING JACK • The TJ-110 Lifting Jack has an 11-ton lifting capacity and is ideal for lifting larger Off-Highway and heavy farm equipment • Works great on truck and trailers too! • The extending piston increases lifting range without the need for blocks • Designed and built with dependability and safety in mind • The large saddle helps to minimize slippage while the large base increases stability • An aluminum cylinder helps to decrease the overall weight of the unit • Equipped with a 3-way air control valve for fast action 308-93737 308-93690 CAP. ASCOT NO. MFG. NO. 308-93690 HW93690 10 308-93737 HW93737A 10 (TONS) MIN. HGT. / MAX. HGT. 17-3/4" / 40" 17-3/4" / 40" SADDLE SPREAD 28" to 53" 2.25" to 3.25" HEIGHT INTERVALS N/A 2-1/2" MIN. PSI FOR RATED LOAD 200 200 WT. (LB.) 670 165 10-TON AIR OPERATED WHEEL LIFT SYSTEM LOAD RETENTION PIN MADE IN THE • Lifts engage wheels without needing to remove panels on vehicle • Raise front or rear end of vehicle using a single controller • Load retention pin allows lifts to function as stands in six different positions • Completely air operated • 2 Year Warranty • Sold in pairs CAP. ASCOT NO. MFG. NO. (TONS) 308-93693 HW93693 10 MIN. HGT. / MAX. HGT. Floor Level / 24” USA FULLY AIR OPERATED 308-00110 FOR LARGER EQUIPMENT LARGE SADDLE POWER RAISE 24" WHEEL DIAM. MIN./MAX. 19-1/2" / 24-1/2” FRAME SIZE (W X D X H) 41-9/16” x 44-1/4” x 53-1/4” PSI 160 WT. (LB.) 1,234 ASCOT NO. MFG. NO. 308-00110 TJ-110 CAP. (TONS) 11 MIN. HGT. / MAX. HGT. 19" / 50” BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 143 ® PROFESSIONAL LIFTING EQUIPMENT Transmission Jacks 1/2-TON CAPACITY TRANSMISSION JACK Wide chassis with open front provides: • Wider opening for saddle and transmission to come lower to the ground for easy removal • Efficient load distribution and stability • Easy access to saddle tilt knobs • Fully adjustable universal saddle with adjustable corner brackets and safety chain • Safety by-pass system prevents damage to cylinder • Safety overload system prevents jack from being used beyond its rated capacity • Full 360 degree rotating pump handle operates in any position • Flash chromed ram inhibits rust from entering the hydraulic system • Four full-swivel ball bearing caster wheels for easy positioning • Wide chassis for efficient load distribution and stability • Norco manufactures over 20 vehicle and service specific adapters to enhance the capabilities of their transmission jacks • MADE IN THE USA UNIVERSAL SADDLE MADE IN THE USA 1/2-TON CAPACITY UNDER HOIST TRANSMISSION JACKS • Fully adjustable universal saddle with adjustable corner brackets and safety chain • Safety overload system prevents jack from being used beyond rated capacity • Foot operated pump and lowering pedals • Two-stage flash chromed rams inhibit rust from entering hydraulic system • 37172550B same as 371-72500E but lifts the load twice as fast with it’s US Patented FASTJACK mechanism • Norco manufactures over 20 vehicle and service specific adapters to enhance the capabilities of their transmission jacks • Made in T UNIVERSAL SADDLE 371-72450 371-72050 CAP. ASCOT NO. MFG. NO. 371-72050 72050C (TONS) 1/2 1-1/2-TON CAPACITY TRUCK TRANSMISSION JACKS • For heavy truck transmissions • Fully adjustable universal saddle with adjustable arms to position the transmission • Heavy duty chain with convenient chain tensioner secures load to saddle • Safety bypass system prevents damage to the hydraulic cylinder • Norco manufactures over 20 vehicle and service specific adapters to enhance the capabilities of their transmission jacks ASCOT NO. MFG. NO. 371-72000 72000E 371-72001 CAP. (TONS) 1-1/2 72000Ei 1-1/2 SAFETY OVERLOAD SYSTEM MIN. HGT. / MAX. HGT. 7-3/4" / 30-3/8” WT. (LB.) 138 UNIVERSAL SADDLE 371-72550 371-72000 MIN. HGT. / MAX. HGT. 7-3/4" / 36-1/2” IMPORT 7-3/4" / 35-2/4” 4" 26-1/2" / 44-1/2” 10-1/4" / 15-1/4” 302 WHEEL DIAM. DOMESTIC 4" 25" / 45" 10-1/4" / 11" 310 ASCOT NO. MFG. NO. CAP. (TONS) 1/2 1/2 1/2 371-72450 371-72501 371-72550 72450B 72500E 72550B MIN. HGT. / MAX. HGT. 36" / 75" 35" / 72" 35" / 72" WT. (LB.) 175 176 178 CHASSIS SIZE SADDLE SIZE WT. (LB.) WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

144 LIFTING EQUIPMENT ® PROFESSIONAL LIFTING EQUIPMENT Transmission Jacks (cont.) 1-TON CAPACITY HYDRAULIC TRANSMISSION JACK • Designed for the removal, installation and transportation (in the lowered position) of heavy duty truck transmissions that are raised by an above-ground lift • Air/hydraulic foot pump for hands free operation • Fully adjustable universal saddle with adjustable arms • Heavy duty chain with chain tensioner to secure load to saddle • Made in Taiwan TRANSMISSION JACK & FUEL TANK REMOVER ADAPTERS • Allows for a safer and quicker removal of transmissions that are not flat on the bottom • Adapters fit transmission jacks 72050E, 72500E and 72550B 309-72533 309-72508 FITS 72050E, 72500E & 72550B 309-72525 AIR/ HYDRAULIC FOOT PUMP ASCOT NO. MFG. NO. 309-72501 309-72502 309-72504 309-72505 72501B 72502B 72504B 72505B UNIVERSAL SADDLE 309-72506 309-72507 309-72508 309-72517 309-72525 ASCOT NO. 371-72701 MFG. NO. 72701A CAP. (TONS) 1 MIN. HGT. / MAX. HGT. 41-1/4" / 69-3/8” WT. (LB.) 273 309-72533 72506B 72507A 72508 72507B 72525 72533 DESCRIPTION Adapter for use on GMC 4-Wheel Drive Transmission Case. WEIGHT: 18 lb. Adapter for use on 4 and 5 Speed Truck Transmissions. WEIGHT: 13 lb. Adapter for use on GMC Front Wheel Drive Transmissions. WEIGHT: 24 lb. Adapter for use on GMC Front Wheel Drive Transmissions (X, J and A Bodies) 3T40. WEIGHT: 15 lb. Adapter for use on GMC 440 Metric Transmissions 4T60-E. WEIGHT: 11-1/2 lb. Adapter for use on Ford 640E & 4R100 (4WD) Truck & Van Transmissions Fuel Tank Adapter Adapter for use on Ford E40D Truck Transmissions. WEIGHT: 34 lb. Optional saddle that replaces the four Adjustable Corner Brackets found on Standard and Universal Saddles This tool will allow for the safe and secure removal and installation of DPFs, Drive Shafts, and automotive transmissions up to 750lb. The bean bag eliminates the need for individual DPF transmission adapters. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 145 1-TON FLOOR STYLE TRANSMISSION JACK • Wishbone design allows unit more mobility • Wide stance tubular steel frame equipped with 4 ball bearing 360° swivel casters • Two heavy cast adjustable mounting plates and load restraint chain • Built in relief valves prevent overloading • 2 Year Warranty FULLER ROAD RANGER TRANSMISSION ADAPTER FOR HW93718 • Fuller Transmission Kit for HW93718 WISHBONE DESIGN BUILT-IN RELIEF VALVES 309-93248 371-93718 CAP. ASCOT NO. MFG. NO. 371-93718 HW93718 (TONS) 1 MIN. HGT. / MAX. HGT. 10-1/4" / 45-1/4" CHASSIS SIZE 47-1/2" / 28-1/4” FORWARD TILT / REAR TILT 27-11/16˚ / 32˚ SIDEWAY TILT WT. (LB.) 13˚ L & R 309 FUEL TANK ADAPTER FOR OMEGALIFT AND HEIN-WERNER TRANSMISSION JACKS • Specifically designed to enable the telescopic transmission jack to be used in the removal and installation of fuel tanks • Maximum tank size of 40 gallons • Two (2x) ratcheting nylon safety straps • Four (4x) padded arms to avoid damage on metal tank HEIN-WERNER MULTIPURPOSE TRANSMISSION ADAPTER • Optional, for use with HW93720 ASCOT NO. MFG. NO. 309-93248 DESCRIPTION HW93248 Fuller Road Ranger Transmission Adapter for HW93718 ASCOT NO. MFG. NO. 309-40080 40080 DESCRIPTION Fuel Tank Adapter for OmegaLift and Hein-Werner Transmission Jacks ASCOT NO. MFG. NO. 309-93721 HW93721 DESCRIPTION Hein-Werner - Multipurpose Transmission Adapter WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

146 LIFTING EQUIPMENT Transmission Jacks (cont.) TELESCOPIC TRANSMISSION JACK • First stage utilizes air for a quick initial rise • Second stage uses hydraulic hand pump for precise control • Four ratcheting brackets fit transmission pan flanges • Hefty nylon safety strap helps anchor transmission • Wide spread casters for smooth maneuverability • Head adjustments made easy with big easy-to-grip crank handles • Optional adapters available • 2 Year Warranty MADE IN THE USA FULLY AIR OPERATED CAP. ASCOT NO. MFG. NO. 371-93720 HW93720 (TONS) 1/2 MIN. HGT. / MAX. HGT. LIFTING HEAD HGT. CHASSIS SIZE 34"-1/2 / 72" 11-3/8" x 11-3/8" 41-1/4" / 41-1/4" FORWARD TILT / REAR TILT 50˚/ 20˚ SIDEWAY TILT 11˚ L & R WT. (LB.) 371-93720 117 TELESCOPIC TRANSMISSION JACK • Chrome-plated rams maximize its high reach operated by a user friendly foot pedal • Extra-wide base lowers center of gravity and promotes stability • Rugged steel wheels and full swivel ball bearing casters • Adjustable ratchet style saddle (Model 41000C and 41001C) • A unique release pedal provides safety in lowering the load • Model 41000C and 41001C are 2 stage manual • Model 41001C is Air Actuated and requires 110-175 PSI CAP. ASCOT NO. MFG. NO. 371-41000 41000C 371-41001 371-42003 41001C 42003 (TONS) 1/2 1/2 1 MIN. HGT. / MAX. HGT. 39-22/25" / 77-1/4" 39-7/8" / 77-1/4" 46" / 74-3/4 SADDLE BASE 12-5/8" x 7-7/8" 11-1/2" x 11-1/2" 13 x 13 MIN. EXP. SADDLE AREA 12-5/8" x 7-7/8" 11-1/2" x 11-1/2" MAX. EXP. SADDLE AREA JACK SIZE 21" x 21" 21" x 21" 33-13/100" x 35-1/2" 33-13/100" x 35-1/2" 13 x 13 24-1/2" x 19" 42" x 39-3/4" WT. (LB.) 161 171 294 CHROME PLATED RAMS FLOOR-STYLE TELESCOPIC TRANSMISSION JACK • The adjustable head can be tilted forward, backward and side to side for optimum alignment of transmission bolt pattern and pins • Hydraulic system is protected from internal damage by a patented by-pass mechanism • Load-restraining chain is vital for raising and lowering safety • Four wheel casters allow easy movement and positioning of transmission jack • Rugged steel wheels and full swivel ball bearing casters • User friendly 360˚ rotating pumping socket for maximum in directional operation CAP. ASCOT NO. MFG. NO. 371-42000 42000C 371-43000 (TONS) 1 43000 1-1/2 MIN. HGT. / MAX. HGT. 7-3/4" / 33" 7-7/8" / 37-1/4” SADDLE BASE 14-3/4" x 7-7/8" 14-3/4" x 16-1/8" HANDLE LENGTH 22-1/2" 29-1/2" EXP. SADDLE AREA 17" x 15-1/2" 16-1/8" x 26-7/8" JACK SIZE 39-3/8" x 19-1/8" 46-3/4" x 25-5/8" WT. (LB.) 200 376 FULLY ADJUSTABLE HEAD BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 147 Wheel Dollies 1/2-TON CAPACITY HYDRAULIC WHEEL DOLLY • For the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level • Heavy duty lift arms made with ball bearing conveyor rollers allow easy rotation of wheels for alignment with bolt pattern • 7-1/2" of side-to-side lift arm adjustment eliminates the trial and error method of aligning the rim’s lug holes with the wheel drum • A 1500-pound capacity heavy duty winch with 5-to-1 gear ratio provides ease of operation • The winch gear design acts as a brake and allow the load to be lowered incrementally if desired and without the need of constant hand pressure against the crank handle • A hydraulic jack tilts the lift arms in order to match the angle of the spindle • Safety chain provided to secure tires and wheels to the dolly • Maneuverability is made easy by means of two rear mounted ball bearing swivel caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving • Perfect for use with truck lifts • ASSEMBLED IN THE USA • 82304 includes air-operated pump that allows the unit to lift the load effortlessly ASCOT NO. MFG. NO. 407-82304 82304 CAP. (TONS) 1/2 LIFT RANGE TILT RANGE 2-1/8" - 39-1/2" -2°-30° LIFT ARM SIZE 30-7/8" x 22-1/8" SIDE TO SIDE ADJ. PRODUCT SIZE (W X D X H) 2-1/2" (Left), 4-1/2" (right) 49-5/8" x 44-5/8" x 69-7/8" WT. (LB.) 476 3/4-TON WHEEL DOLLY • For handling of dual wheels and large single wheels MADE IN THE USA • Designed to facilitate the removal and installation of pneumatic tires and wheel assemblies found on many trucks, buses and trailers • Handles up to 52” diameter tires and wheels • The frame is constructed from heavy gauge welded tubular steel for maximum strength and durability • Load levelers aid alignment • Carriage arm rollers with self-lubricating bearings • Restraining chain with the unit to secure the load • 2 swivel ball bearing casters for easy positioning • Wide frame and lifting carriage • Handy tool/parts tray on frame • The wheel dolly is designed to be used in conjunction with jacks and jacks stands • 2 Year Warranty CAP. ASCOT NO. 407-93766 MFG. NO. HW93766 (TONS) 3/4 LIFT RANGE ARM LENGTH / SPREAD 23" / 26-1/2" 4" - 9" OVERALL SIZE (W X D X H) 39-1/2" x 38-3/4" x 32" 407-93766 WT. (LB.) 118 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

148 LIFTING EQUIPMENT Wheel Dollies (cont.) 3/4-TON WHEEL DOLLY • Dolly handles any tire diameter and up to 1500 lb. combined tire and wheel weight • Three 4" diameter swivel ball bearing caster wheels provide easy maneuverability and positioning • Travel adjustment on rear locking caster wheel matches lifting arms with spindle angle • 6' chain included to secure wheel assembly to dolly during removal and transport • Quick disconnect push/pull handle provides unobstructed access to hub area • ASSEMBLED IN THE USA TIRE DOLLIES • Heavy-duty tubular s handling 300 pounds • Eas improved “bent arm installation and minimiz rollers for simple alignmen studs • Spring-loaded kick • Can accommodat ® PROFESSIONAL LIFTING EQUIPMENT 407-82310 EASY TO POSITION 407-82320 ASCOT NO. MFG. NO. 407-82320 82320 CAP. (TONS) LIFT TRAVEL 3/4 4-3/4" LIFT ARM SIZE 26" x 24-1/2" PRODUCT SIZE (W X D X H) 43-1/2" x 39-1/2" x 35" WT. (LB.) 175 TRUCK WHEEL DOLLY • Tire/wheel is rotated left or right on tiltable roller pads for perfect stud alignment • Perfect for 8-10 hole Budd type wheels • Removes truck wheels and tires fast and easy • Increases productivity • Reduces manpower needs • Saves time and money - maintenance free • Heavy duty tubular construction lifts 280 lb. • 3" caster wheels roll the truck wheels for effortless removal or replacement 407-82312 FAST AND EASY 407-70130 ASCOT NO. MFG. NO. DESCRIPTION 407-70130 407-70132 70130 TRUCK: 8" Rollers (280 lb. Capacity) 70132 SUPER SINGLE: 14" Rollers (450 lb. Capacity) ASCOT NO. MFG. NO. 407-82310 407-82312 82310 82312 22" Narrow Single Tire Handler Dolly 26" Wide Single Tire Handler Dolly DESCRIPTION BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 149 TW2000 TWEEL HANDLER™ • The TW2000 solution is a built-in ratcheting jack with 14˚ of vertical travel • The Tweel Handler’s U-shaped chassis allows you to get close to the work area, with unhindered access to the tire in the cradle • No restraining chains are required, yet the Tweel Handler™ holds virtually any single truck wheel, including widebased singles • Three heavy-duty ball-bearing wheels mounted under ball-bearing swivel casters make it highly maneuverable ASCOT NO. MFG. NO. 407-02000 DESCRIPTION TW2000 TW2000 Tweel Handler™ 407-02000 407-03000 HEAVY DUTY TIRE DOLLY • Reduce back injuries • Perfect stud alignment • Perfect for 8 to 10-hole Budd-type wheels • Removes truck wheels and tires fast and easy • Increases productivity • Reduces manpow needs • Saves time and money, maintenance free • Works with tires 23.5" to 43.5" ASCOT NO. MFG. NO. 407-03000 104 111 112 DESCRIPTION BJ-T300A Heavy Duty Tire Dolly ASCOT NO. MFG. NO. DESCRIPTION 407-10400 407-11100 407-11200 PARTS AND ACCESSORIES FOR HEAVY DUTY TIRE DOLLY Roller Set Rubber Wheel Deep Groove Ball Bearing 116 119 120 ASCOT NO. MFG. NO. DESCRIPTION 407-11600 407-11900 407-12000 Pin Lock Rubber Cove Nylon Wheel 407-47110 SAFER-GO TRUCK TIRE DOLLY • This convenient dolly makes manually lifting wheel sets completely unnecessary • Simply slide the rollers underneath the tire and use the jack handle to raise it to the desired height • Use the included Gaither O-LINE-ER® to perfectly position the wheel for easy installation • Equipped with a collapsible handle frame making it easy to store and ideal for mobile service • LIFTING CAPACITY: 350 lbs. ASCOT NO. MFG. NO. 407-47110 G471106 DESCRIPTION Safer-Go Truck Tire Dolly WINNTEC TIRE DOLLY • 500 lb. capacity allows for use on all commercial truck tire sizes • Longer rollers (2 ½" longer) makes it even easier to handle super single sizes • Wheel position allows tech to lift tire/wheel assembly by pushing down, instead of lifting up • O-LINE-ER and Bracket included with new production models (O-LINE-ER used for lining up stud holes with studs) O-LINE-ER STUD ALIGNMENT TOOL ASCOT NO. MFG. NO. DESCRIPTION 407-47105 G471105HD Winntec Tire Dolly ASCOT NO. MFG. NO. 491-00101 DESCRIPTION GTO-01TB O-LINE-ER Stud Alignment Tool 407-47105 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

150 LIFTING EQUIPMENT Wheel Dollies (cont.) 2,000 LB. HEAVY DUTY 3-IN-1 CAR DOLLY SET • HOLDS VEHICLE: By the wheel, by the pinch weld and by the frame • No adapters required • Integrated frame adapters • Locking casters • No tools required • Adapter secured with pins • Self-stacking • Allows convenient storage • Sold in pairs of two 3/4-TON WHEEL DOLLY • Hydraulic system actuated to provide smooth, positive power for the removal and installation of single, tandem, and duplex tires and wheels • Load restraining chain for security 3/4-TON CAPACITY (1500 LBS.) CHAIN FOR LOAD RESTRAINT 407-47020 NO TOOLS REQUIRED NO ADAPTERS REQUIRED ASCOT NO. ASCOT NO. MFG. NO. DESCRIPTION 407-47020 47020 2,000 LB Heavy Duty 3-IN-1 Car Dolly Set MFG. NO. 407-47053 47053 CAP. TILT (TONS) LIFT RANGE RANGE 3/4 LIFT ARM SIZE 2-1/4" - 11" (-)2 - 5° 25-7/8" x 25-1/4" PRODUCT SIZE (W X D X H) 43-1/2" x 43" x 34-7/8" WT. (LB.) 151 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 151 ® PROFESSIONAL LIFTING EQUIPMENT WHEEL DOLLY FOR AGRICULTURAL AND EARTH MOVING MACHINERY 300 LB. CAPACITY SINGLE TIRE LIFTER • Easy and safe mounting, demounting and handling of large wheels on agricultural and earth moving machinery • Capable of handling large wheels from 45.3" up to 84.7" in diameter and up to 41.3" in depth • CAPACITY: 3,306 lbs • Double acting hydraulic system • Handsfree switch between lifting and lowering action • Safe and controlled lowering • 2 x 4 large rollers improve handling of tires with deep treads • Top-point wheel connection rod keeps the wheel in safe balance • To safely assist a technician with the removal and installation of single wheels on vehicles that are supported on a lift • Maneuverability is made easy by means of four swivel caster wheels • Two rear caster wheels include a locking mechanism which can prevent the dolly from moving • Unique offset design offers open access from the rear to mount wheel to the vehicle • Onboard rollers make for easy stud-to-hole alignment • Air-operated controls allows the unit to lift the load effortlessly • 4" low height of support legs FOUR SWIVEL CASTER WHEELS AIROPERATED CONTROLS 407-82306 EASY AND SAFE FOUR LARGE ROLLERS The Wheel Dolly for Agricultural and Earth Moving Machinery makes possible easy and safe mounting, demounting and handling of large wheels. ASCOT NO. MFG. NO. 407-90538 90538 DESCRIPTION Wheel Dolly for Agricultural and Earth Moving Machinery ASCOT NO. 407-82306 MFG. NO. 82306 CAP. (LB.) 300 LIFT TRAVEL MIN. HGT. / MAX. HGT. WIDTH LENGTH 35-1/8" 4" / 39-1/8" 9" - 22" 17-1/2" - 33-1/4" WT. (LB.) 200 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

152 LIFTING EQUIPMENT 302-81022 Vehicle Stands & Accessories UNDERHOIST STAND • Sturdy, welded steel construction for superior safety and strength • Ideal to support the exhaust system, shock absorber and other vehicle components during an under vehicle repair - Not designed to support vehicle • Acme screw allows for precise height adjustment 302-81050 ® PROFESSIONAL LIFTING EQUIPMENT 20 & 50-TON CAPACITY TRAILER STABILIZING STANDS • NEW! Now comes with wheels that allow for easier positioning under the load • Meets OSHA requirements for supporting trailer when loaded or unloaded • 14" diameter base provides maximum leveling stability • Quick adjust spin handle for ease of turning • Large diamond plate saddle to grip the load ASCOT NO. MFG. NO. 302-81022 81022A 81050 CAP. DESC. US 302-81122 81022Ai Import 302-81050 - (TONS) 20 50 MIN. HGT. / MAX. HGT. BASE SIZE SADDLE SIZE 39" / 50-5/8” 14" Diameter 4-1/2" x 5" 20 39" / 50-5/8" 14" Diameter 4-1/2" x 5" 39" / 51" 14" Diameter 8" Dia. WT. (LB.) 52 52 152 STURDY, WELDED STEEL ASCOT NO. 302-31500 302-31501 302-33020 MFG. NO. 31500 31501 33020 CAP. (TONS) 3/4 3/4 2 302-31500 302-31501 MIN. HGT. / MAX. HGT. BASE SIZE 55" / 80" 302-33020 SADDLE SIZE 12" Diameter 5-1/4" x 1-1/2" 55" / 80" 12" Diameter 5-1/4" x 1-1/2" 67" / 76-3/4" 23" x 18" 5-1/4" x 1-1/2" WT. (LB.) 33 39 53 302-81034 HYDRAULIC JACK OIL • Formulated with oxidation stable base oils, rust inhibitors, antiwear agents & antifoam agents to provide protection for hydraulic jacks and lifting equipment • 32 oz. bottle • 6 bottles per case ASCOT NO. 302-81033 302-81034 302-81035 MFG. NO. 81033A 81034A CAP. (TONS) 3/4 3/4 81035A 1-1/2 MIN. HGT. / MAX. HGT. BASE SIZE 55-1/4" / 81-1/2” 55-1/4" / 81-1/2” 48-7/8" / 85-3/8” 302-81035 SADDLE SIZE 12" Diameter 1-5/8" x 5-1/4" 12" Diameter 1-5/8" x 5-1/4" 12" Diameter 3-1/4" x 3-1/4" WT. (LB.) 35 39 39.5 3/4 & 1-1/2-TON UNDER TRAILER HOIST STANDS • Lightweight, slender design • Quick adjus spin handle with thrust bearing eliminates wear and provides ease of turning load • Foot pedal (81034A only) generates 1" additional stroke and 400 lb. of force at the saddle • Pedal may be locked in vertical position for storage or shipment 1-1/4" diameter acme threaded screw has 26-1/4” travel PROTECTS LIFTING EQUIPMENT ASCOT NO. MFG. NO. 309-00925 DESCRIPTION MAG-925 Hydraulic Jack Oil (6 per Case) 309-00925 HYDRAULIC JACK OIL ASCOT NO. MFG. NO. 309-93291 309-93294 HW93291 HW93294 DESCRIPTION 1 Quart 1 Gallon BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 153 Hydraulic Shop Presses ® PROFESSIONAL LIFTING EQUIPMENT 50 AND 100-TON CAPACITY HYDRAULIC SHOP PRESSES • For heavy duty use in truck garages and industrial work shops • Manually operated two speed pump provides quick ram travel to load • Hand operated winch raises and lowers press bed • Welded frames for strength and no assembly required • Self-retracting ram is bearing mounted for lateral movement on head channel • Delivered Fully Assembled • ASSEMBLED IN THE USA • 78057A features air/hydraulic foot pump and 10' hose • 78058A and 78110B feature electro/hydraulic pump FOR HEAVY DUTY USE 317-78058 QUICK RAM TRAVEL TO LOAD BED ASCOT NO. MFG. NO. 317-78057 78057A OPERATING SYSTEM 317-78055 78055A Manual Air/ Hydraulic 317-78058 78058A Electro/ Hydraulic 317-78077 78077 317-78078 78078 317-78110 Air/ Hydraulic Electro/ Hydraulic 78110B Electro/ Hydraulic 50 13-1/4" 100 10-1/4" 50 6-1/4" 50 13-1/4" CAP. (TONS) RAM TRAVEL 50 6-1/4" MIN. HGT. / MAX. HGT. 50 6-1/4" 7-1/2"/ 32-5/8” 7-1/2" / 32-5/8” 7-1/2" / 32-5/8” 7-1/2" / 32-5/8" 7-1/2" / 32-5/8" 18-1/4" / 45-3/4” THROAT WIDTH HEIGHT ADJ. 34-1/2" 7 x 5" 34-1/2" 7 x 5" 34-1/2" 7 x 5" 34-1/2" 7 x 5" 34-1/2" 7 x 5" 40-1/4" 8 x 4-1/2" BETWEEN UPRIGHTS 5-5/8" 5-5/8" 5-5/8" 5-5/8" 5-5/8" 5-5/8" BETWEEN BED RAILS 7-3/8" 7-3/8" 7-3/8" 7-3/8" 7-3/8" 9" WT. (LB.) 804 801 814 833 846 317-78111 1,777 78111A ARBOR PLATES (FOR USE WITH NORCO 50 AND 100-TON SHOP PRESSES) • For use with Norco 50 and 100ton shop presses only ASCOT NO. MFG. NO. 317-78056 78056A HYDRAULIC GAUGE WITH FITTING • For use with Norco 12 and 20-ton capacity shop presses only • 4" diameter face • Dial indicates internal pressure (PSI) and corresponding pounds of force at ram end • Accurate within 2-1/2% • 1/4" NPT fitting ASCOT NO. MFG. NO. 317-78021 78021 DESCRIPTION Hydraulic Gauge with Fitting. WEIGHT: 2 lb. 317-78000 ASCOT NO. MFG. NO. DESCRIPTION 317-78000 78000 12 and 20-ton capacity pair of Arbor Plates. WEIGHT: 20 lb. ARBOR PLATES (FOR USE WITH NORCO 12 AND 20-TON SHOP PRESSES) • For use with Norco 12 and 20-ton shop presses only • 1" x 4" x 10" long steel plates with “V” cutout on one edge and circle cutout on the other 317-78021 DESCRIPTION 50-ton capacity pair of Arbor Plates. WEIGHT: 108 lb. 100-ton capacity pair of Arbor Plates. WEIGHT: 153 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

154 LIFTING EQUIPMENT Hydraulic Shop Presses (cont.) 25-TON CAPACITY HYDRAULIC SHOP PRESS • Excellent for bending, bonding or straightening applications • Multi-position bed for work height adjustment • Heavy steel welded construction • Includes hand winch for easy bed adjustments 55-TON CAPACITY HYDRAULIC SHOP PRESS • Excellent for bending, bonding or straightening applications; Ideal for the removal or installation of gears, universal joints pulleys, wrist pins, and other press jobs • Heavy steel welded construction • Pressure relief valve for overload protection • Dual stage release control valve • Multi-position bed for work height adjustment STEEL WELDED DESIGN • Ideal for the removal or installation of gears, universal joints, pulleys, wrist pins, and other press jobs • 4" pressure gauge 100-TON CAPACITY HYDRAULIC SHOP PRESS MADE IN THE • Excellent for bending, bonding or straightening applications • 100-Ton Capacity • Heavy steel welded construction • Includes hand wench for easy bed adjustments • 1 HP / 2-gallon electric pump • Quiet operation meets OSHA regulations SHOP PRESS SPECIFICATIONS ASCOT NO. 317-93300 317-93400 317-93610 MFG. NO. HW93300 HW93400 HW93610 DESCRIPTION 25-Ton Shop Press with Manual Hand Pump 55-Ton Shop Press with Manual Pump 100-Ton Shop Press with Electric Pump CAPACITY (TONS) 25 55 100 STROKE 6" 6" 10" INTERIOR WIDTH 30" 35-1/2" 35-3/8" TYPE OF PUMP Air Pump BED WORKING HEIGHT Hand Pump 6-1/2" - 49-1/2" 7-1/2" - 55-1/2" Electric Pump 12-1/4" - 52-1/2" POSITIONS 8 9 6 SHIPPING WEIGHT (LB.) 484 855 1221 • Industrial hard chromeplated ram helps prevent rust and corrosion • Ideal for the removal or installation of gears, universal joints, pulleys, wrist pins, and other press jobs USA BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION LIFTING EQUIPMENT

LIFTING EQUIPMENT 155 Shop Cranes 2-TON ENGINE CRANE • Heavy duty welded construction with rugged reinforced tubular steel • Metered control release valve for lowering boom at a precisely-controlled rate of speed • Special 8 Ton hydraulic long rams are equipped with a patented built-in by-pass mechanism HEAVY DUTY STEEL DESIGN METERED CONTROL RELEASE VALVE 331-44020 2-TON ENGINE CRANE • Folds for easy storage • Mobility handle for easy movement • 3 Boom extension positions • Swivel handle hook • Manual hand pump for load lifting and control • ADJUSTS FOR WIDE CLEARANCE: One front wheel caster aids in movement FOLDS FOR EASY STORAGE MOVES EASILY WITH MOBILITY HANDLE 331-93809 SHOP CRANE SPECIFICATIONS ASCOT NO. MFG. NO. CAP. (TONS) BOOM MIN. 331-44020 331-93809 331-93806 44020 HW93809 HW93806 2 2 3 5" 5" 6-1/2" BOOM MAX. 86-1/2" 130" 144-1/2" LEG EXTENSION 90-3/4" 55" 91-1/4" SIZE 31-1/2" x 61-3/4" 28" x 75" 75" x 51" WEIGHT (LB.) 266 616 1110 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE LIFTING EQUIPMENT

156 LIFTING EQUIPMENT Shop Cranes (cont.) ® PROFESSIONAL LIFTING EQUIPMENT 1/2, 2 AND 3-TON CAPACITY SHOP CRANES • Designed to raise, lower and transport engines, transmissions, differentials and other heavy loads with minimal effort • Four adjustable legs provide greater stability • 1/2 and 2-ton are boom retracted • 3-ton available in either air/hydraulic or electro/hydraulic • ASSEMBLED IN THE USA ASCOT NO. MFG. NO. 331-78106 OPERATING SYSTEM 78106A Manual 331-78600 78600B Air/ Hydraulic 331-78605 78605A Electro/ Hydraulic BOOM CAP. @ LENGTH 2-Ton @ 44-3/4" 3-Ton @ 65" 2-1/2-Ton @ 81" BOOM MIN. 0" BOOM MAX. 88" LEG EXTENSION 83-1/2" 13" 149-1/2" 49", 65", 81" 13" 149-1/2" 49", 65", 81" OVERALL SIZE (W X L X H) 74-1/2" X 51-3/4" X 70-3/4" 75" X 51" X 90-1/2" 75" X 51" X 90-1/2" WEIGHT (LB.) 320 1,150 1,182 ® 331-78106 PROFESSIONAL Brake Drum Handlers BRAKE DRUM HANDLER 407-7 • Handles 15" and 16-1/2" drums • • Ball bearing wheels, semi-pneumatic tires and 3/4" diameter axle provide easy maneuverability and balance ASCOT NO. MFG. NO. LOW LIFT HEIGHT 407-72040 72040B 10-1/4" HIGH LIFT HEIGHT 15-1/4" OVERALL SIZE 21" / 62-1/2” WHEEL DIAMETER 8" WT. (LB.) 64 BRAKE DRUM HANDLER • Ideal for removing and installing truck brake drums • Works with 15" and 161/2" drums • Includes detachable handle for convenient storage ASCOT NO. MFG. NO. 407-46000 46000 BACK BUDDY II • The Back Buddy II™ rolls under and bolts onto heavy drum and hub assembly, then handily rolls the assembly out and lays it over for servicing • Re-assembly is quick and precise because the Back Buddy II™ angles for perfect hub alignment, eliminating seal damage and costly fixes • The Back Buddy II™ handles all hub and drum assemblies with Universal Receiver and Adapter Sets • Adapters 6069 and 6073 10-hole inboard and outboard application are included • Other wheel adapters sold separately 407-00350 ASCOT NO. MFG. NO. DESCRIPTION 407-00350 350B Back Buddy II DESCRIPTION Brake Drum Handler BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. ARNING: F SUPPLY CORPORATION LIFTING EQUIPMENT

157 Tire Lubricants & Sealants Markers Tire Branding Inserts Bead Breakers Hydraulic Pumps & Rams OTR Service Tools Cribbing Sets & Wheel Chocks Bead Seating Devices Chloride Pumps Mount/Demount Tools Hammers & Wedges Wrenches & Lug Wrenches Shop Service Tools Tire Inflation Systems Safety Inflation Cages WARNING: For more information go to www.P65Warnings.ca.gov. ARNING: F SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

160 TIRE & WHEEL SERVICE Tire Lubricants & Sealants ASCOT TIRE AND TUBE MOUNTING COMPOUND • Versatile formula-dilutes to any strength your job requires • Approved by major tire companies world-wide • Made from natural, renewable resources • Totally safe for all tires • Economical when diluted • Ultra-thick concentrate for excellent performance when packing beads 432-02029 ASCOT NO. MFG. NO. DESCRIPTION 432-02012 432-02014 432-02028 432-02029 432-02035 2012 2014 2028 2029 2035 ASCOT BLACK TIRE LUBRICANT • Stops the bonding or “freezing” of tire beads to tire rims which allows for easy, damage free removal of tires • Will not swell or affect rubber, especially inner tubes 432-02786 STOPS BONDING OF TIRE BEADS Tire/Tube Mounting Compound, 125 lb. Drum Tire/Tube Mounting Compound, 445 lb. Drum Tire/Tube Mounting Compound, 8 lb. Pail (4 per Case) Tire/Tube Mounting Compound, 25 lb. Pail Tire/Tube Mounting Compound, 40 lb. Pail BLACK RIM RUST RETARDANT & TIRE LUBE • Makes tire mounting and dismounting faster and easier • Now with rust inhibitor • Approved by major rubber companies • Lubricates all rubber parts, stops rubber squeaks 435-08001 437-00002 ASCOT NO. MFG. NO. DESCRIPTION 435-02785 435-02786 2785 2786 Ascot Black Tire Lubricant, 8 lb. Pail (4 per Case) Ascot Black Tire Lubricant, 25 lb. Pail MISCELL SWABS AND BR 437-00001 437-00003 435-06002 437-40006 ASCOT NO. MFG. NO. 435-06001 435-06008 435-06002 435-06003 435-06004 435-07001 435-07002 435-08001 435-08002 435-08003 DESCRIPTION 065-2539 048-2539 025-2539 040-2539 120-2539 041-2541 005-2541 025-2540 048-2540 040-2540 Black Rim Rust Retardant Tire Lube, 6 - 5 lb. Black Rim Rust Retardant Tire Lube, 4 - 8 lb. Black Rim Rust Retardant Tire Lube, 25 lb. Black Rim Rust Retardant Tire Lube, 40 lb. Black Rim Rust Retardant Tire Lube, 120 lb. Tire Mounting & Rubber Lubricant, 4 Gal. Tire Mounting & Rubber Lubricant, 5 Gal. Tire Mounting & Rubber Lubricant Paste, 25 lb. Tire Mounting & Rubber Lubricant Paste, 8 lb. Tire Mounting & Rubber Lubricant Paste, 40 lb. 437-13014 ASCOT NO. MFG. NO. 437-00001 437-00002 437-00003 437-40006 437-13014 TS-1 TS-2 TS-3 40006 313014 DESCRIPTION Tire Swab - 11" OAL X 2" Diameter Tire Swab - 15" OAL X 2" Diameter Tire Swab - 18" OAL X 3" Diameter Tire Lubricating Brush Hunter-Style Tire Lubricating Brush BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 161 MURPHY'S CONCENTRATED TIRE & TUBE MOUNTING COMPOUND MURPHY’S NON-RUST RIM-KOTE • Versatile formula-dilutes to any strength your job requires • Approved by major tire companies world-wide • Made from natural, renewable resources • Totally safe for all tires • Economical when diluted • Ultrathick concentrate for excellent performance when packing beads • Acts as tire mounting lubricant - prevents tire bead “freezing” • Contains no petroleum - prevents rim rust and scale • Great for seating tubeless bias, belted and radial tires • APPLICATIONS: Recommended for mounting tires on heavy duty trucks, buses and off-the-road vehicles 32-02005 434-02110 ASCOT NO. MFG. NO. 432-02000 2000 432-02005 432-02008 432-02014 2005 2008 2014 DESCRIPTION Murphy's Concentrated Tire & Tube Mounting Compound, 8 lb. Pail (4 per Case) Murphy's Concentrated Tire & Tube Mounting Compound, 25 lb. Pail Murphy's Concentrated Tire & Tube Mounting Compound, 40 lb. Pail Murphy's Concentrated Tire & Tube Mounting Compound, 445 lb. Drum NO RIM RUST MURPHY’S WHITE TIRE MOUNTING PASTE • Designed for alloy wheels, low profile and run flat tires • Extra Slippery to help mount tires with stiff beads • No water, no mixing. Use right from the container • Contains rust inhibitor to help fight rim rust • Protects tires. Tire bead won’t fuse to rim • Helps prevent corrosion on rims and rigs • Helps you comply with OSHA Regulation 3086 ASCOT NO. MFG. NO. 434-02110 434-02120 2110 2120 DESCRIPTION Non-Rust Rim-Kote, 30 lb. Pail Non-Rust Rim-Kote, 40 lb. Pail HELPS PREVENT CORROSION 435-00125 432-02167 ASCOT NO. MFG. NO. DESCRIPTION 432-02146 432-02167 2146 2167 8 lb. Pail 8 lb. Pail (Low Profile) 432-02146 ASCOT NO. MFG. NO. DESCRIPTION 435-00015 435-00125 435-01120 FL4-1 FL25-1 FL120-1 No Rim Rust, 4-1/2 lb. Pail No Rim Rust, 25 lb. Pail No Rim Rust, 120 lb. Drum WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

162 TIRE & WHEEL SERVICE Tire Lubricants & Sealants (cont.) UNIVERSAL MOUNTING PASTE MURPHY'S LIQUID LUBRICANT • Designed to assist in mounting rubber tires and tubes on all types of wheels • Ready to use liquid for easy application • Easy clean up and non-toxic • Contains rush inhibitor to help fight rust • Makes mounting and demounting tires easier and faster and helps alleviate stress on and damage to the bead area of tires • Tire mounting paste applies with a sponge and will not corrode or discolor aluminum or alloy wheels, won’t freeze or harden • Rubber Lubricant is a liquid concentrate that makes one gallon of rust-inhibiting water-based mounting lubricant RUST INHIBITOR READY TO USE 432-00751 437-00730 ASCOT NO. MFG. NO. DESCRIPTION 433-02020 2020 433-02023 433-02022 2023 2022 433-02020 Murphy's Liquid Lubricant, 1 Gallon (4 per Case) Murphy's Liquid Lubricant, 5 Gallons Murphy's Liquid Lubricant, 55 Gallons 432-00740 MURPHY'S CONCENTRATED EXTRA SLIPPERY LIQUID LUBRICANT • Contains improved super lubricity polymers • Rust inhibitor added to help fight rim rust • ECONOMICAL: Dilutes 2 to 1 • Formulated for super-fast mount of passenger tires ASCOT NO. MFG. NO. 432-00730 432-00731 432-00740 432-00750 432-01750 432-00751 437-00001 437-00002 437-00003 73 73T 74 75 75N 75B TS-1 TS-2 TS-3 RUST INHIBITOR DILUTES 2 TO 1 ASCOT NO. MFG. NO. DESCRIPTION 433-01950 1950 Murphy's Concentrated Extra Slippery Liquid Lubricant, 1 Gallon (4 per Case) 433-01957 433-01958 1957 1958 Murphy's Concentrated Extra Slippery Liquid Lubricant, 5 Gallons Murphy's Concentrated Extra Slippery Liquid Lubricant, 55 Gallons 433-01950 OTR MOUNTING/ PACKING COMPOUND • Extra thick for Superior Bead Packing on OTR tires • Makes OTR Tire Mounting Faster and Easier • Will not separate or liquefy 432-12490 ASCOT NO. MFG. NO. 432-12490 432-12492 2490 2492 DESCRIPTION OTR Mounting/Packing Compound, 25 lb. OTR Mounting/Packing Compound, 40 lb. 432-00750 DESCRIPTION Mounting Paste Brush for Car/Light Truck Mounting Paste Brush for Trucks Universal Mounting Paste, 22 lb. High Profile Universal Mounting Paste, 7.7 lb. Low Profile Universal Mounting Paste, 7.7 lb. Bracket For Mounting Paste Swab - 11" OAL x 2" Diameter Swab - 15" OAL x 2" Diameter Swab - 18" OAL x 3" Diameter 432-01750 QTY./ BOX 1 1 1 1 1 1 1 1 2 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 163 TIRE MOUNTING COMPOUNDS • Excellent Lubrication • Will not separate or liquefy • Superior for tire bead packing • Concentrated; water soluble, can be diluted CAN BE DILUTED LIQUID LUBE BLUE TIRE MOUNTING LIQUID • Excellent Lubrication • Superior “Tack” and Bead Sealing qualities • Reduces tire/ rim slippage • Concentrated; water soluble, can be diluted • Near neutral pH factor CAN BE DILUTED 432-12180 432-12280 ASCOT NO. MFG. NO. 432-12178 2178 432-12180 432-12183 432-12012 432-12014 432-12278 432-12280 432-12282 432-12214 2180X 2183 2012 2014 2278 2280 2282 2214 DESCRIPTION Tire Mounting Compound (Honey Color), 8 lb. (4 per Case) Tire Mounting Compound (Honey Color), 25 lb. Tire Mounting Compound (Honey Color), 40 lb. Tire Mounting Compound (Honey Color), 125 lb. Tire Mounting Compound (Honey Color), 55 Gal. Tire Mounting Compound (Brown Color), 8 lb. (4 per Case) Tire Mounting Compound (Brown Color), 25 lb. Tire Mounting Compound (Brown Color), 40 lb. Tire Mounting Compound (Brown Color), 55 Gal. ASCOT NO. MFG. NO. 433-81505 81505 433-81511 433-81515 BEAD BUTTER BLUE TIRE MOUNTING LIQUID LUBE • Excellent Lubrication • No Residue • Concentrated; water soluble, can be diluted 433-81555 81511 81515 81555 433-81511 DESCRIPTION Liquid Lube Blue Tire Mounting Liquid, 2 Gal. (5 Gal. Mixing Pail) Liquid Lube Blue Tire Mounting Liquid, 1 Gal. (4 per Case) Liquid Lube Blue Tire Mounting Liquid, 5 Gal. Liquid Lube Blue Tire Mounting Liquid, 55 Gal. BLACK-ICE STOP RUST RIM RELEASE • Lubricates rim and tire for easy mounting & demounting • Protects against rust & corrosion • Prevents rim and bead from bonding CAN BE DILUTED PROTECTS AGAINST RUST 433-02054 ASCOT NO. MFG. NO. 433-02053 2053B 433-02054 433-02055 2054B 2055B DESCRIPTION Bead Butter Blue Tire Mounting Liquid Lube, 1 Gal. (4 per Case) Bead Butter Blue Tire Mounting Liquid Lube, 5 Gal. Bead Butter Blue Tire Mounting Liquid Lube, 55 Gal. ASCOT NO. MFG. NO. 435-02480 2480 DESCRIPTION Black-Ice Stop Rust Rim Release, 25 lb. Pail 435-02480 433-02053 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

164 TIRE & WHEEL SERVICE Tire Lubricants & Sealants (cont.) SURE SHOT PRESSURE SPRAYERS • Air pressurized and refillable • Environmentally safe, eliminates aerosol usage • For brake and parts cleaner, penetrating oils, lubricants, degreasers, solvents • MADE IN USA ASCOT NO. MFG. NO. 632-00005 632-00010 632-01002 K-5 K-10 A1002 632-10001 A1000R ELIMINATES AEROSOL USAGE MADE IN THE USA 632-01002 DESCRIPTION Partial Repair Kit for Model A Sure Shot Sprayers Complete Repair Kit for Model A Sure Shot Sprayers Sure Shot Black Enameled Steel Sprayer w/ Adjustable Nozzle Sure Shot Enameled Steel Sprayer - Red CONCENTRATED EZ CHECK LEAK DETECTOR • Finds leaks in all tires • Environmentally friendly • Excellent foam formation • Skin friendly • Commercial use only ANODIZED ALUMINUM SPRAYER • Adjustable pistol-grip nozzle • Features a chemical resistant anodized finish • Will work with water, solvent & oil-based materials • Replaces Model “A” plated brass sprayers • 24 oz. capacity • MAX PRESSURE: 200 PSI • MADE IN USA ASCOT NO. MFG. NO. 632-02400 M2400S ADJUSTABLE PISTOL GRIP 400 MADE IN THE USA DESCRIPTION Anodized Aluminum Sprayer INDUSTRIAL SPRAY BOTTLE 433-25430 • Industrial sprayer for use with light oils, solvents, and detergents • The durable polyethylene bottle is impervious to high and low temperatures • The trigger mechanism is resistant to damage caused by caustic materials ASCOT NO. MFG. NO. 632-00922 632-00923 TS-922 3210B32 DESCRIPTION 16 Oz. Spray Bottle 32 Oz. Spray Bottle 632-00922 632-00923 ASCOT NO. MFG. NO. 433-25430 433-25431 2543 2543-1G DESCRIPTION Ascot EZ Check Leak Detector, Quart (12 per case) Ascot EZ Check Leak Detector, Gallon (4 per case) 433-25431 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 165 B'LASTER PENETRANT W/ PROSTRAW • #1 selling penetrant • Breaks free rusted or frozen parts • Protects against further rust and corrosion • Use on automotive, industrial, marine, plumbing and other equipment • New ProStraw™ with Control Flow Technology™ • Quantity: 12 cans per case LIQUITUBE • Effective for tire life. Seals ALL sources of air-loss • Helps balance truck tires • Helps maintain proper air pressure • Keeps tires cooler for increased tread wear • Does NOT rust or corrode wheels • Water soluble for easy clean out for recapping tire casings NEW PROSTRAW™ TECHNOLOGY 408-00116 ASCOT NO. MFG. NO. 408-00116 DESCRIPTION 16-PB-DS B'laster Penetrant w/ ProStraw, 11 oz. can (12 per case) B'LASTER 26PB PENETRANT 451-20516 • #1-selling penetrant • Breaks free rusted or frozen parts • Protects against further rust and corrosion • Use on automotive, industrial, marine, plumbing & other equipment • QUANTITY: 6 per case #1 SELLING PENETRANT ASCOT NO. MFG. NO. 408-00026 26PB DESCRIPTION B'laster 26PB Penetrant, 18 oz. (6 per Case) ASCOT NO. MFG. NO. 451-00640 451-20516 DESCRIPTION 1220-0640 LiquiTube 5-Gallon Pail 1220-516 408-00026 PENETRANTS/AIR LEAK DETECTOR R LiquiTube 5-Gallon Injector Pump 1-00640 B'LASTER NON-CHLORINATED BRAKE CLEANER • Removes brake fluid, oil, grease & contaminants • Non-chlorinated • Fast, evaporating formula • Stops brake squeal • QUANTITY: 6 per case STOPS BRAKE SQUEAL 328-05003 ASCOT NO. MFG. NO. 417-00020 20BC DESCRIPTION B'laster Non-Chlorinated Brake Cleaner, 14 oz. (6 per Case) 417-00020 ASCOT NO. MFG. NO. 328-05003 328-05005 433-35805 DESCRIPTION 001-1071P 005-1071P 35805 Ultra Pen Lube 2000 Penetrant Lubricant, 1 Gal. Ultra Pen Lube 2000 Penetrant Lubricant, 5 Gal. Detecto Mist Air Leak Locator, 1 Qt. 433-35805 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

166 TIRE & WHEEL SERVICE Tire Lubricants & Sealants (cont.) STS TIRE SEALANTS • Seals 2x more punctures than the competition • Permanently seals punctures up to 1/4" • Prevents wheel corrosion, glycol free • Non-toxic, non-flammable, noncombustible • 100% bio-degradable and water soluble • Lasts for the lifetime of the tire • Wide range of applications • Low freeze point, freeze/thaw stable 451-00440 FREEZE/ THAW STABLE ASCOT NO. MFG. NO. DESCRIPTION STS TIRE SEALANT 451-04128 451-00640 451-00006 451-00055 451-00275 451-14128 451-01640 451-00026 451-24128 451-02640 451-00036 451-00255 STSCS4128 STS640 STS6G STS55G STS275T STSCONCS4128 STSCON640 STSCON6G STSOTRCS4128 STSOTR640 STSOTR6G STSOTR55G 4 (1) Gallon Per Case 5-Gallon Pail 6-Gallon Pail 55-Gallon Drum 275-Gallon Tote STS CONCENTRATE TIRE SEALANT 4 (1) Gallon Per Case 5-Gallon Pail 6-Gallon Pail STS OTR TIRE SEALANT 4 (1) Gallon Per Case 5-Gallon Pail 6-Gallon Pail 55-Gallon Drum ECO SEAL STS TOOLS AND ACCESSORIES ASCOT NO. 451-00101 451-00440 451-00551 451-00707 469-02311 469-02312 MFG. NO. ST-XM-1 ST-XM-44 STXM55 ST-TTS-WW VCR-A VCR-F • 7x corrosion resistance • Maintains non-acidic pH levels, even in high temperatures • Permanently seals punctures up to 1/4" • Glycol-free; prevents wheel corrosion • Environmentally friendly formula, uses recycled rubber and 100% biodegradable ingredients • Non-toxic, non-flammable, non-combustible • Low freeze point (-10°F) DESCRIPTION 1 Gal. Hand Pump 5 Gal. Hand Pump 55 Gal. Transfer Pump STS Display Stand Auto Valve Core Tool Farm Valve Core Tool ASCOT NO. MFG. NO. 451-05510 504-00005 504-00055 504-00275 504-02424 504-01832 504-01248 DESCRIPTION ST-XM55 ECO5G ECO55G ECO275G ECOCS2424 ECOCS1832 ECOCS1248 5 Gal. EcoSeal Hand Pump 5 Gal. Pail 55 Gal. Drum 275 Gal. Tote 24 oz. Bags 32 oz. Bags 48 oz. Bags BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 167 Markers PAINTSTIK® MARKERS • Real paint in stick form • Ideal for coding tire casings • Marks are long lasting, water resistant and weather resistant • Marks will withstand vulcanizing and recap temperatures • Non-toxic, contains no lead • Marking r -50°F to 150°F (-46°C to 66°C) • INCL 12 sticks per box, 12 boxes per case 459-85100 ASCOT NO. MFG. NO. 459-85100 85100 DESCRIPTION 6" Push-Button Metal Holder for B-Paintstik WATER RESISTANT ASCOT NO. COLOR 459-80220 White (Markal B) 459-80221 459-80222 459-80223 459-80225 Yellow (Markal B) Red Black Blue ASCOT NO. COLOR 459-80226 459-80227 459-80228 459-80229 459-80230 459-80231 Gray Gold Green Pink Purple Brown ASCOT NO. COLOR 459-80232 Aluminum 459-80257 White 459-80258 459-80271 Yellow Orange PAINTSTIK® MARKER HOLDER QUIK STIK® MINI • Fast-drying, vibrant paint marks dry in 5 to 7 minutes • Compact plastic holder with clip cap stores easily in pocket and keeps hands and clothing clean • Marks on virtually any surface; wet, smooth, rough, or hot • Weather- and UV-resistant paint for long-lasting marks • Solid paint marker advances and retracts by turning twist-up knob • Xylene and 2-Butoxyethanol free formula to reduce health risks • MARKING RANGE: 0°F to 392°F (-18°C to 200°C) MARKAL TYRE MARQUE • Ideal for temporary marking of tires • Marks easily on wet or cold surfaces • Lead-free, zincfree marks can be painted over • SIZE: 1/2" X 4-5/8" • MARKING RANGE: -20°F to 130°F (-29°C to 24°C) • INCLUDES: 12 sticks per box, 12 boxes per case ASCOT NO. MFG. NO. COLOR 459-54220 459-54222 EASILY MARKS ON WET OR COLD SURFACES EASILY MARKS ON ANY SURFACE 459-54222 ASCOT NO. MFG. NO. DESCRIPTION 459-61126 459-61127 459-61128 459-61129 61126 61127 61128 61129 51420 White 51421 Yellow E-Z BREAK® The White Markal Crayon in use. ANTI-SEIZE COMPOUND-COPPER GRADE B® HEX WHITE TIRE PAINTSTIK • Ideal for temporary marking of tires • Marks easily on wet or cold surfaces • INCLUDES: 12 sticks per box, 12 boxes per case 459-80250 ASCOT NO. MFG. NO. 459-80250 80250 DESCRIPTION B® Hex White Tire Paintstik EASILY MARKS ON WET OR COLD SURFACES • Copper-based anti-seize and lubricating compound • Prevents seizing of aluminum wheels to steel brake drums or rotors • Will not wash off in rain or snow • Other applications include head bolts, exhaust manifolds and muffler connections, brackets and engine bolts • Withstands temperatures to 1800°F (982°C) ASCOT NO. MFG. NO. DESCRIPTION 494-01010 494-08907 494-08916 08910 08907 08916 10 Oz. Can With Brush in Cap 16 Oz. Can with Brush in Cap 14 Oz. Aerosol Can 494-08916 Mini Quik Stik® Marker (White) Mini Quik Stik® Marker (Yellow) Mini Quik Stik® Marker (Red) Mini Quik Stik® Marker (Black) QTY./BOX 12 12 12 12 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

168 TIRE & WHEEL SERVICE Tire Branding Inserts 1" Letters and Numbers 1/2" Letters and Numbers 1/4" Letters and Numbers ASCOT NO. MFG. NO. 452-00100 452-00101 452-00102 452-00103 452-00104 452-00105 452-00106 452-00107 452-00108 452-00109 452-00201 452-00202 452-00203 452-00204 452-00205 452-00206 452-00207 452-00208 452-00209 452-00210 452-00211 452-00212 452-00213 452-00214 452-00215 452-00216 452-00217 452-00218 452-00219 452-00220 452-00221 452-00222 452-00223 452-00224 452-00225 452-00226 BI-CC-1BZ-0 BI-CC-1BZ-1 BI-CC-1BZ-2 BI-CC-1BZ-3 BI-CC-1BZ-4 BI-CC-1BZ-5 BI-CC-1BZ-6 BI-CC-1BZ-7 BI-CC-1BZ-8 BI-CC-1BZ-9 BI-CC-1BZ-A BI-CC-1BZ-B BI-CC-1BZ-C BI-CC-1BZ-D BI-CC-1BZ-E BI-CC-1BZ-F BI-CC-1BZ-G BI-CC-1BZ-H BI-CC-1BZ-I BI-CC-1BZ-J BI-CC-1BZ-K BI-CC-1BZ-L BI-CC-1BZ-M BI-CC-1BZ-N BI-CC-1BZ-O BI-CC-1BZ-P BI-CC-1BZ-Q BI-CC-1BZ-R BI-CC-1BZ-S BI-CC-1BZ-T BI-CC-1BZ-U BI-CC-1BZ-V BI-CC-1BZ-W BI-CC-1BZ-X BI-CC-1BZ-Y BI-CC-1BZ-Z DESCRIPTION 1" CHARACTERS - INDIVIDUAL 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ASCOT NO. MFG. NO. 452-00001 452-00011 DESCRIPTION 1" CHARACTERS - SETS TB1NOSET TB1LETSET 1" Set - Numbers 1" Set - Letters ASCOT NO. MFG. NO. 452-02100 452-02101 452-02102 452-02103 452-02104 452-02105 452-02106 452-02107 452-02108 452-02109 452-00501 BI-CC-1/2BR-1 BI-CC-1/2BR-2 BI-CC-1/2BR-3 BI-CC-1/2BR-4 BI-CC-1/2BR-5 BI-CC-1/2BR-6 BI-CC-1/2BR-7 BI-CC-1/2BR-8 BI-CC-1/2BR-9 BI-CC-1/2BR-A 452-00502 BI-CC-1/2BR-B 452-00503 BI-CC-1/2BR-C 452-00504 BI-CC-1/2BR-D 452-00505 BI-CC-1/2BR-E 452-00506 BI-CC-1/2BR-F 452-00507 BI-CC-1/2BR-G 452-00508 BI-CC-1/2BR-H 452-00509 BI-CC-1/2BR-I BI-CC-1/2BR-J BI-CC-1/2BR-K BI-CC-1/2BR-L BI-CC-1/2BR-M BI-CC-1/2BR-N BI-CC-1/2BR-O BI-CC-1/2BR-P BI-CC-1/2BR-Q BI-CC-1/2BR-R BI-CC-1/2BR-S 452-00510 452-00511 452-00512 452-00513 452-00514 452-00515 452-00516 452-00517 452-00518 452-00519 452-00520 BI-CC-1/2BR-T BI-CC-1/2BR-U 452-00521 452-00522 BI-CC-1/2BR-V 452-00523 BI-CC-1/2BR-W 452-00524 BI-CC-1/2BR-X BI-CC-1/2BR-Y BI-CC-1/2BR-Z 452-00525 452-00526 ASCOT NO. MFG. NO. 452-00012 452-00112 TB1/2LETSET DESCRIPTION 1/2" CHARACTERS - INDIVIDUAL BI-CC-1/2BR-0 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z DESCRIPTION 1/2" CHARACTERS - SETS TB1/2NOSET 1/2" Set - Numbers 1/2" Set - Letters ASCOT NO. MFG. NO. 452-01100 452-01101 452-01102 452-01103 452-01104 452-01105 452-01106 452-01107 452-01108 452-01109 452-00401 BI-CC-1/4BR-1 BI-CC-1/4BR-2 BI-CC-1/4BR-3 BI-CC-1/4BR-4 BI-CC-1/4BR-5 BI-CC-1/4BR-6 BI-CC-1/4BR-7 BI-CC-1/4BR-8 BI-CC-1/4BR-9 BI-CC-1/4BR-A 452-00402 BI-CC-1/4BR-B 452-00403 BI-CC-1/4BR-C 452-00404 BI-CC-1/4BR-D 452-00405 BI-CC-1/4BR-E 452-00406 BI-CC-1/4BR-F 452-00407 BI-CC-1/4BR-G 452-00408 BI-CC-1/4BR-H 452-00409 BI-CC-1/4BR-I BI-CC-1/4BR-J BI-CC-1/4BR-K BI-CC-1/4BR-L BI-CC-1/4BR-M BI-CC-1/4BR-N BI-CC-1/4BR-O BI-CC-1/4BR-P BI-CC-1/4BR-Q BI-CC-1/4BR-R BI-CC-1/4BR-S 452-00410 452-00411 452-00412 452-00413 452-00414 452-00415 452-00416 452-00417 452-00418 452-00419 452-00420 BI-CC-1/4BR-T BI-CC-1/4BR-U 452-00421 452-00422 BI-CC-1/4BR-V 452-00423 BI-CC-1/4BR-W 452-00424 BI-CC-1/4BR-X 452-00425 BI-CC-1/4BR-Y 452-00426 BI-CC-1/4BR-Z ASCOT NO. MFG. NO. 452-00014 452-00114 TB1/4LETSET DESCRIPTION 1/4" CHARACTERS - INDIVIDUAL BI-CC-1/4BR-0 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z DESCRIPTION 1/4" CHARACTERS - SETS TB1/4NOSET 1/4" Set - Numbers 1/4" Set - Letters BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 169 TIRE REGROOVER Ergonomic handle design makes working with this tool easier and reduces hand-fatigue • An 8-position heat control modulates cutting intensity resulting in fast and accurate regrooving of Truck or Tractor tires • Not intended for Passenger vehicle tires • Blades are not included 455-00003 The Rubber Cut 414 in use. SERIAL NUMBER REMOVER TOOL ASCOT NO. MFG. NO. 455-00003 455-00129 RC414 N/A 455-00401 W-1 455-00402 455-00403 455-00404 455-00405 455-00406 455-00444 455-04444 455-12500 455-15017 455-15019 W-2 W-3 W-4 W-5 W-6 No. 4 Head No. 4 Bld. 125 N/A N/A DESCRIPTION Rubber Cut 414 Rema Regroover Set Screw for PS-15 Regroover Regroover Blades 20-Pack Regroover Blades 20-Pack Regroover Blades 20-Pack Regroover Blades 20-Pack Regroover Blades 20-Pack Regroover Blades 10-Pack Replacement Head for 125 Groover Replacement Blades for 125 Groover Heavy Duty Pistol Grip Tire Groover Transformer for PS-15 Regroover Rotative Switch for PS-15 Regroover 531-95001 531-95002 ASCOT NO. MFG. NO. DESCRIPTION 531-95001 531-95002 TTHB-1 RRB-1 Serial Number Remover Tool 12-Pack Replacement Blades WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

170 TIRE & WHEEL SERVICE Bead Breakers “COMBI” TIRE BEAD BREAKER • Works on a single, two and thr agricultural and earthmover tir beads in seconds using 10,000 lbs. of f screws, bolts or attachments • “ breaker will not work on five-piec mover giant wheel/rim QUICKLY GIANT TIRE/EARTHMO TIRE BEAD BREAKER • Use on 5-piece rims 15" to 51" without pry bar bead loosening pockets • Model 15000 15040 air/hydraulic pump recommended f operation • Replaces Goodyear T ASCOT NO. MFG. NO. 422-11040 11040 422-16200 DESCRIPTION Giant Tire/Earthmover Tire Bead Breaker 422-12000 GIANT TIRE/EARTHMOVER TIRE BEAD BREAKER • 4-1/4" stroke, 14-ton ram will break the toughest beads • Use on 5-piece rim 25" to 51" with pry bar/bead loosening pocket • Replaces Goodyear TO-1600HA • Same as IMT-1800 • Model 15000, 15020 or 15040 air/hydraulic pump recommended BREAKS TOUGHEST BEADS The Giant Tire/ Earthmover Tire Bead Breaker in use. 22-12020 ASCOT NO. MFG. NO. 422-11010 422-12000 11010 12000 422-12020 422-16200 12020 16200 DESCRIPTION Bead Breaker Bead Breaker Kit. INCLUDES: 11010 Bead Breaker, 15000 Pump and 16040 Hose Assembly Bead Breaker Kit. INCLUDES: 11010 Bead Breaker, 15920 Pump and 16040 Hose Assembly Conversion Kit for Combi Bead Breaker 422-12090 MODIFIED “COMBI” TIRE BEAD BREAKER • Modified 11010, the most popular tool for breaking beads on all agriculture wheels • Most affordable bead breaker for new 3 piece wheel assemblies • Modified jaw and feet allow for larger grab on larger wheel assemblies • Can be used on the front and back side of the wheel assembly • All parts (except for modified feet and jaw) can be interchanged with 11010 ASCOT NO. MFG. NO. DESCRIPTION 422-11020 11020 Modified "Combi" Tire Bead Breaker MOST POPULAR TITAN EARTHMOVER BEAD BREAKER • Ideal for tire dealer who requires occasional use of bead breaker • 10-ton cylinder has enough force to break most beads • 4" (10 cm) stroke length • Unit will work on 5 piece wheels with bead loosening pockets • WEIGHT: 34 lbs. (15.5 kg) 422-11020 ASCOT NO. MFG. NO. 422-11005 11005 DESCRIPTION Titan Earthmover Bead Breaker 422-11005 12090 ASCOT NO. MFG. NO. 422-11000 422-12070 11000 12070 DESCRIPTION Bead Breaker Bead Breaker Kit. INCLUDES: 11000 Bead Breaker, 15000 Pump, 16040 Hose Assembly Bead Breaker Kit. INCLUDES: 11000 Bead Breaker, 15920 Pump, 16040 Hose Assembly 422BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 171 DUAL AGRICULTURAL TRACTOR TIRE BEAD BREAKER OTR GIANT TIRE BEAD BREAKER • Compact, lightweight tool used primarily on 25" and 29" earthmover wheels • Originally marketed as Goodyear TO1600-HA • Works only on 5 piece wheels with bead loosening pockets • 2 1/8" (5.4 cm) stroke • 10 tons of hydraulic force • Used with 10,000 PSI (700 bar) air/hydraulic pump • WEIGHT: 23 lbs. (10 kg) ASCOT NO. MFG. NO. 422-11050 11050 DESCRIPTION OTR Giant Tire Bead Breaker 422-11050 DUAL AGRICULTURAL 300 TIRE BEAD BREAKER • Designed for all agricultural applications • Lightweight and easy to handle • Requires only 4 ½" (11.5 cm) operating space • 5 Tons of pushing force • Opens to 12" (30.5 cm) wide • WEIGHT: 20 lbs. (9kg) OTR 3000 GIANT TIRE BEAD BREAKER • Designed specifically to work on Topy and Rimex OE wheels found on Terex, Komatsu, Liebherr and Le Tourneau • Designed to prevent the tool from kicking out while under load • 6’ Stroke ram delivers maximum force • New Universal Jaw design works on ALL wheels 51" – 63" • WEIGHT: 54 lbs. (24.5 kg) 422-11065 ASCOT NO. MF 422-11065 1106 TITAN FARM TIRE BEAD BREAKER MAXIMUM FORCE ASCOT NO. MFG. NO. 422-11044 11044 DESCRIPTION OTR 3000 Giant Tire Bead Breaker • Ideal for tire dealer who r occasional use of bead break cylinder has enough force t beads • 4" (10 cm) stroke length • Unit will break all single and 2-piece and most 3-piece wheels • WEIGHT: 34 lbs. (15.5 kg) GIANT TIRE/EARTHMOVER TIRE BEAD BREAKER • Use on all 39", 45", 49", 51", 57" and 63" wheel sizes • In most cases you must first use Model 10105 or 10100 bead breaker to start the movement of the rim flange. Model 11030 can then be used • Model 15020 or 15040 air/hydraulic pump recommended for operation • Replaces Goodyear TO-2000-HA 422-10103 ASCOT NO. MFG. NO. 422-10103 422-12110 11030 12110 DESCRIPTION Giant Tire Earthmover Bead Breaker Kit Contains 11030 Bead Breaker, 15040 Pump And 16020 Hose Assembly ASCOT NO. MFG. NO. 422-10100 10100 DESCRIPTION Giant Tire/Earthmover Bead Breaker ASCOT NO. MFG. NO. 422-11015 11015 DES Titan Farm Tire Bead Breaker GIANT TIRE/ EARTHMOVER BEAD BREAKER • Use on 5-piece 25" to 51" with pry bar/bead loosing pockets • Ram will break the toughest of beads • Use with 10,000 PSI Hydraulic Pump COMPACT & LIGHTWEIGHT • HEAVY DUTY: 10-tons of force breaks the toughest beads • Breaks inside bead on outside dual farm tractor tires • Requires just 3" of operating space between dual tractor tires • Use with 10,000 PSI air/hydraulic pump • No need to remove outside wheel to change tire on outside dual 422-11060 ASCOT NO. MFG. NO. 422-11060 11060 DESCRIPTION Dual Agricultural Tractor Tire Bead Breaker 422-11015 422-10100 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

172 TIRE & WHEEL SERVICE Bead Breakers (cont.) MAXI BEAD BREAKER TITAN PRO MODIFIED COMBI BEAD BREAKER • Compact design allows tool to be used on front or back of wheel • Ideal to break large OTR 3-piece wheels • Larger clamp and feet allow tool to easily clamp onto wheels • Most parts interchange with common bead breakers in the market • Designed for use on 25” multi-piece wheels • Tire Sizes: 23.5x25, 26.5x25, 29.5x25 • 11 Ton – 10,000 PSI (700 BAR) ASCOT NO. MFG. NO. 422-11025 11025 DESCRIPTION Titan Pro Modified Combi Bead Breaker STINGER BEAD BREAKER • OTR Bead Breaker for heavy duty • 3-piece rims that replace standard 5-piece rims • Works on both front and back of wheel without dismounting wheel from v all new 3-piece 25" wheels or lar all wheels with CAT “Shur ASCOT NO. MFG. NO. 318-11090 11090 DESCRIPTION Stinger Bead Breaker 318-11090 422-40801 ASCOT NO. MFG. NO. 422-40801 40801 DESCRIPTION COMBI Style Aluminum Bead Breaker • Works on ALL 3-piece wheels with extended flange that have replaced the older 5-piece wheels • Designed to work on front or back of the wheel with no attachments or accessories • Clamps easily to the wheel • Longer feet and claw than the “Combi” Bead Breaker Model #10101 • No setup time ASCOT NO. MFG. NO. 422-10102 10102 DESCRIPTION Maxi Bead Breaker 422-11025 COMBI STYLE ALUMINUM BEAD BREAKER • Lightweight aluminum construction • 10 tons of bead breaking force • Comparable to the Model #10101 Combi bead breaker • To be used on 3-piece wheel assemblies • Extended jaw for deep dish style wheels (extended flange) 422-10102 SAFETY FEATURE 422-11076 DIAMONDBACK ALUMINUM BEAD BREAKER KIT "COMBI" HYDRAULIC TIRE BEAD BREAKER • Works on single, two and three-piece truck tires/rims • Breaks beads in seconds using 13.8 tons of force • “Combi” Bead Breaker will not work on five-piece Earthmover giant wheel/rim, Model #10100 or Model #10105 is required 422-10101 ASCOT NO. MFG. NO. 422-10101 10101 DESCRIPTION "COMBI" Hydraulic Tire Bead Breaker ASCOT NO. MFG. NO. 422-11076 11076 DESCRIPTION Diamondback Aluminum Bead Breaker Kit • Lightweight Aluminum reduces weight by 40% • Longer feet allow better fit onto wheel/ rim • Feet fully engage rim flange and push against the bead of the tire • WEIGHT: 31 lb. (14kg) LIGHTWEIGHT ALUMINUM BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 173 PNEUMATIC BEAD BREAKER • Recommended for agricultural, small OTR and most truck tires • EXTEMELY FAST: saves time over conventional hydraulic bead breakers • LIGHTER WEIGHT THAN CONVENTIONAL BEAD BREAKERS: only 17 lb. • Includes storage case • Requires a minimum of 85 psi SLIDE HAMMER BEAD BREAKER • Protect your expensive wheels from swinging hammers by breaking the bead loose with this slide hammer • Use only on wheels without a hump PROTECTS WHEELS FROM DAMAGE 423-00101 ASCOT NO. MFG. NO. 423-00101 DESCRIPTION GTABB-01 Pneumatic Bead Breaker ASCOT NO. MFG. NO. 427-12026 12026B DESCRIPTION Slide Hammer Bead Breaker WINNTEC WHEEL BREAKER SET PLATINUM DEMOUNT TOOL • Provides a safe and easy way to loosen oxidized (stuck) wheels • Simply place the ram between the duals or between the inside wheel & frame • The manual pump allows the technician to feel how much pressure is being applied • Adaptors included for wider work spaces SAFE AND EASY • Demounts tire sizes 17.5" - 24.5" • Only a single tool needed to demount tires • Eliminates the need to lift the tire and wheel making a hard job easy and protecting against insurance claims • Unique design protects valuable tire casings for retreading • Handle design pr and o 448-12100 PROTECTS TIRE CASINGS The Winntec Wheel Breaker Set in use. The Platinum Demount Tool in use. ASCOT NO. MFG. NO. 422-47180 G471180 DESCRIPTION Winntec Wheel Breaker Set ASCOT NO. MFG. NO. 448-12100 G12100 DESCRIPTION Platinum Demount Tool WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

174 TIRE & WHEEL SERVICE R Bead Breakers (cont.) IMPACT BEAD BREAKER • Loosens the most stubborn beads with floating bead br foo dir DRIVING IRON • Used for loosening rusted truck and bus beads ASCOT NO. MFG. NO. 427-26000 T26A 427-35926 LOOSENS STUBBORN BEADS 427-45926 ASCOT NO. MFG. NO. 427-35924 427-35926 427-45926 T24B T26B 35926-11 DESCRIPTION LENGTH LENGTH EXT. 46" 50" Economy Heavy Duty 72" 80" WEIGHT 13.5 lb. 23 lb. Impact Bead Breaker Replacement Grips PORTABLE TOOLS FLOOR TYPE BEAD BREAKER • Use on custom wheels, without center holes, wide based motorcycle tires, ATV tires • Used to prevent bending of wheels PREVENTS BENDING OF WHEELS ASCOT NO. MFG. NO. LENGTH STOCK WT. 427-00041 427-00042 427-00052 T41 T42 T52 30" 30" 33" 7/8" 7/8" 7/8" 5.3 lb. 4.8 lb. 5.5 lb. “SWAN NECK” BEAD BREAKING TOOLS • PORTABLE TOOLS: Gr to handled bead breaking w or hydraulic bead break LOOSENS 427-26000 DESCRIPTION LENGTH STOCK 11-3/4" Driving Iron 1-1/4" WEIGHT 4.4 lb. ATV BEAD BREAKER 421-00098 ASCOT NO. MFG. NO. 421-00098 T98 DESCRIPTION Deluxe TREAD WIDTH Up to 11" WEIGHT 28.5 lb. • Constructed of heavy duty steel • Works with any center-post tire changing machine and adjusts to sizes of 6" to 12" ATV rims • No hammers, wrenches or additional tools required PORTABLE BEAD BREAKER • Breaks beads on most sizes of passenger tires & light trucks 421-38620 421-00100 HEAVY DUTY STEEL ASCOT NO. MFG. NO. 421-00100 T100 DESCRIPTION Portable Bead Breaker HANDLE LENGTH 36" WEIGHT 5.2 lb. ASCOT NO. MFG. NO. 421-38620 38620 DESCRIPTION WEIGHT ATV Bead Breaker 7 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 175 5-QUART AIR HYDRAULIC PUMP - STEEL RESERVOIR AIR HYDRAULIC PUMP (5-QUART OIL CAPACITY) • Builds 10,000 PSI of pressure • Operates on 80-120 PSI of inlet air pressure • Durable metal air motor assemblies • Designed for conditions associated with OTR sites • WEIGHT: 30 lbs (13.6 kg) DURABLE METAL AIR ASSEMBLIES • Rugged 5-quart metal reservoir • Air inlet filter keeps air clean • All-metal air motor • 10,000 PSI hydraulic pressure ALL-METAL AIR MOTOR 318-15920 318-15025 ASCOT NO. MFG. NO. 318-15025 15025 DESCRIPTION 5-Quart Air/Hydraulic Pump with Steel Reservoir MILLER MUD FLAP TURBO II AIR HYDRAULIC PUMP (3.5-QUART OIL CAPACITY) • Rugged polyglass reservoir with sight gauge • 10,000 PSI hydraulic pressure • Easily works on rams and bead breakers with oil to spare • Unique design easily fits truck storage bins • Turbo II pump-fastest pump available • Redesigned air motor is inexpensive to service • User-friendly footactuated design for easy control of moving fluid • Fits AME 15920 and IMT style pumps • Prevents dirt from getting into the release valve assembly • Inexpensive solution to lengthen the life of your pumps 318-15901 ASCOT NO. MFG. NO. 318-15901 15901 DESCRIPTION Miller Mud Flap ASCOT NO. MFG. NO. DESCRIPTION 318-15920 318-15930 15920 15930C 5-Quart Air Hydraulic Pump Air Hydraulic Pump w/Hose & Coupler AIR HYDRAULIC PUMP (2-GALLON OIL CAPACITY) • Rugged 2-gallon metal reservoir • Air inlet filter keeps air clean • All metal air motor • 10,000 PSI hydraulic pressure RUGGED POLYGL RESER RUGGED 2-GALLON CAPACITY 318-15000 ASCOT NO. MFG. NO. DESCRIPTION 318-15000 318-15010 318-15020 15000 15010 15020 3.5-Quart Air Hydraulic Pump Above Pump With Hydraulic Hose 5-Quart Air Hydraulic Pump ASCOT NO. MFG. NO. DESCRIPTION 318-15940 318-15950 15940 15950C 2-Gallon Air Hydraulic Pump 2-Gallon Air Hydraulic Pump w/Hose & Coupler WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

176 TIRE & WHEEL SERVICE Hydraulic Pumps, Rams 1/2-GALLON AIR/HYDRAULIC PUMP - ALUMINUM RESERVOIR • For use with a variety of hydraulic rams, cylinders, presses, bead breakers, and other hydraulic equipment requiring 10,000 psi for operation • Equipped with an air exhaust muffler for quiet pumping of air motor • Air and oil inlet filters for reducing risk of damage from contamination • Durable, lightweight design great for service trucks, shop environments or out in the field • Internal pressure relief valve system (load limit device) for overload protection • Engineered with durable lightweight and corrosive resistant plastic components, increasing the life of the air motor and hydraulic pump 2½-QUART TITAN AIR/HYDRAULIC PUMPS - ALUMINUM RESERVOIRS • Operates with as little as 80 PSI (5.5 bar) • Heavy duty aluminum reservoir • Durable metal air motor • WEIGHT: 14 lb. (6.4 kg) Kit with Hose, Coupler & Reducer 318-10518 318-15906 ASCOT NO. MFG. NO. 318-10518 318-11518 10518 10518C DESCRIPTION 1/2-Gallon Air/Hydraulic Pump 1/2-Gallon Air/Hydraulic Pump Kit. INCLUDES Hose, Coupler & Reducer SINGLE ACTING ALUMINUM OCK NUT CYLINDER 318-15907 y lock nut for mechanical load holding eight and good portability • High w quick coupler • Overflow port functions as a stroke limiter • Spring turn • Features a carrying handle COT NO. MFG. NO. 318-10808 318-10809 10808 10809 318-10808 CAPACITY (TONS) 50 100 SAFETY LOCK NUT ASCOT NO. MFG. NO. DESCRIPTION 318-15905 15905 COLLAPSED HEIGHT 12-1/2" 13-1/3" EXTENDED HEIGHT 18-3/4" 19-3/4" WEIGHT (LBS.) 26.4 66 318-15907 15907 318-15906 15906 2-1/2-Quart Titan Air/Hydraulic Pump, 10,000 PSI 2-1/2-Quart Titan Air/Hydraulic Pump, 5,500 PSI 2-1/2-Quart Titan Air/Hydraulic Pump, 3,900 PSI BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 177 ALUMINUM 100-TON ALUMINUM RAMS • Lightweight yet durable • The preferred jack for road service • Includes "Shut-Off Valve" to allow the pump to be removed while ram is extended LOCK NUT FOR EXTENDED LOADS 55-TON HYDRAULIC JACKS - ALUMINUM • Lightweight Aluminum constructed Hydraulic Cylinder • For use with 10,000 psi pumps • Ships completely assembled with valve, coupler, and 8" x 8" base • Ideal for OTR, mining, agricultural and construction applications • Robust 11/16" cylinder wall for heavy-duty use 318-13000 318-13164 CAP. ASCOT NO. MFG. NO. 318-13000 318-13164 13000 13164 (TONS) STROKE 100 100 6" 6" MIN. HEIGHT 12" 15.59" MAX. HEIGHT 18" 21.5" WEIGHT (LBS.) 53 59 318-10312 55-TON ALUMINUM RAMS • Lightweight aluminum for easy handling and placement under the vehicle • Includes "Shut-Off Valve" which allows the pump to be removed while the ram is extended 100-TON HD LIGHTWEIGHT HYDRAULIC JACK • Lightweight yet durable • For use with 10,000 PSI pumps • Ships completely assembled with valve and coupler 318-13165 318-13120 MIN. ASCOT NO. MFG. NO. CAP. (TONS) 318-13120 318-13165 13120 13165 55 55 STROKE 6" 6" HEIGHT MAX. HEIGHT 12.25" 18.25" 15.59" 21.5" WEIGHT (LBS.) 29 33 ASCOT NO. MFG. NO. 318-10300 PERFECT FOR OFFHIGHWAY WORK CAP. 10300 100 (TONS) STROKE 6" MIN. HEIGHT 11.75" MAX. HEIGHT 17.75" WEIGHT (LBS.) 55 ASCOT NO. MFG. NO. 318-10312 318-10314 10312 10314 CAP. (TONS) STROKE 6" 6" 55 55 MIN. HEIGHT 12" 16" MAX. HEIGHT 18" 26" 318-10314 WEIGHT (LBS.) 33 41 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

178 TIRE & WHEEL SERVICE Hydraulic Pumps, Rams (cont.) HYDRAULIC RAMS • Used to push off rear rim flange and tire bead on earthmover wheels • For all earthmover tires, trucks and perfect for construction CAP. ASCOT NO. MFG. NO. 422-13010 422-13020 422-13030 422-13040 422-13050 422-13060 422-13090 422-13100 13010 13020 13030 13040 13050 13060 13090 13100 (TONS) 10 10 10 10 10 30 25 25 COLLAPSED HEIGHT 4-3/4" 6-3/4" 9-3/4" 11-3/4" 13-3/4" 4-5/8" 12-3/4" 10" STROKE 2-1/8" 4" 6-1/8" 8" 10-1/8" 2-7/16" 8-1/4" 6-1/4" 422-13010 422-13050 422-13040 422-13030 422-13020 STEEL-A-STACK HYDRAULIC RAM KIT • Versatile ram kit allows you to select your ram length from 3.5" (9 cm) up to 11.5" (29.21 cm) • Extensions can be used individually or together • Steel Extensions are durable enough for OTR applications • Extensions include 1" (2.5 cm), 2" (5 cm), and 3" (7.5 cm) options • 3" Extension includes a screw in saddle that extends another 2" • Ships in HD carrying case • 10 Ton 1.5" (3.8 cm) stroke 422-13075 ASCOT NO. MFG. NO. 422-13075 13075 DESCRIPTION Steel-A-Stack Hydraulic Ram Kit VERSATILE RAM KIT BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 179 135-10605 135-10606 HYDRAULIC COUPLERS ASCOT NO. MFG. NO. 135-10605 135-10606 PVV-38-M PVV-38-F • High-flow hydraulic coupler, 10,000 PSI working pressure DESCRIPTION 3/8" Male Hose Half Coupler - For Hydraulic Rams 3/8" Female Ram Half Coupler - For Hydraulic Rams HYDRAULIC QUICK CONNECT COUPLER/PLUG • 10,000 PSI maximum operating pressure • Safety sleeve lock prevents accidental disconnection • Heavy duty back-up ring prevents o-ring extrusion • Heat treated and plated steel for greater wear and corrosion resistance • Self-sealing poppet valves provide excellent high and low pressure seating ASCOT NO. MFG. NO. 135-11606 135-12606 DESCRIPTION 135-12606 FD35-1001-0606 FD35-1002-0606 Hydraulic Quick Connect Coupler Hydraulic Quick Connect Plug RUBBER DUST COVER FOR HYDRAULIC COUPLERS • Used to keep dirt and debris from your hydraulic coupler when not connected • Equipped with a pre-slit ring to allow coupler to slide easily over the counter • Comes standard with 8' and 10' hydraulic hoses ASCOT NO. MFG. NO. 319-03732 DESCRIPTION 03-RDC Rubber Dust Cover for Hydraulic Couplers 3/8” HYDRAULIC HOSES • 10,000 PSI Working Pressure, 20,000 PSI Burst Pressure • High flow valve for fast inflation • Includes half coupler and plastic dust cover ASCOT NO. MFG. NO. 318-04960 318-04120 DESCRIPTION 9010-08 8’ Hydraulic Hose Assembly 10’ Hydraulic Hose Assembly 9010-10 318-04960 32 135-11606 QUICK COUPLERS • Precision built and designed for high pressure • Permits disconnecting without loss of oil • 3/8" NPTF ASCOT NO. MFG. NO. DESCRIPTION 318-09795 318-09796 318-09798 318-09799 9795 9796 9798 9799 Complete Quick Coupler Ram Half Coupler And Dust Cap Hose Half Coupler Only Hose Half Coupler Dust Cap Only 318-09796 318-09798 318-09795 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

180 TIRE & WHEEL SERVICE OTR Service Tools FLANGE RING PULLER • Lifts the rim base and bead seat band from the tire • Aids in bead seating during inflation • Attaches to a standard boom style service truck • 4-point hook/chain assembly for optimal lifting • Chain lengths of 30" (76.2 cm) • Includes 2 flat hooks and 2 tapered hooks to allow use on all rim styles • WEIGHT: 32 lb. ASCOT NO. MFG. NO. CAPACITY 402-08029 93000 5,000 lb. 402-08029 2-WAY PUSH BAR • Two-way push bar allows for quick and easy depression of the bead seat band flange ring and rim for removal of the lock ring and O-ring • Can also be used to retain the tire during inflation QUICK AND EASY The Bead Push Off Tool in use. ASCOT NO. MFG. NO. 429-10108 11080 429-08837 BEAD HOOKS DESCRIPTION Bead Push Off Tool AIDS IN BEAD SEATING BEAD PUSH OFF TOOL • Lightweight tool for removing combine and tractor tires after breaking the bead • Pushing force of 8,000 lbs. and a 5.5" stroke, a removable handle for compact storage and uses hydraulic pressure to force the tire off the rim • Hooks between the rim and the tire bead 429-10108 429-00441 429-01601 The 2-Way Push Bar in use. ASCOT NO. MFG. NO. 429-06661 429-08837 92005 92000 CAPACITY 33" to 57" 25" to 51" ASCOT NO. MFG. NO. 429-00441 429-01601 B0441PC D1601PC DESCRIPTION Bead Hook Bead Hook CAPACITY 12,000 lb. 16,000 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 181 TIRE SLING CAN • Adjustable locking sling for dismounting single or dual assembly tires • With locking mechanism so tires don’t rotate • MADE IN THE USA EARTHMOVER TIRE BEAD HOOKS • Used to connect with hydraulic boom on tire service truck for transport of tires • Model 94000 has slim design which will fit inside all tires, even ones that have been stacked CONNECT WITH HYDRAULIC BOOM 402-06662 ASCOT NO. MFG. NO. 402-06662 91000 DESCRIPTION CAPACITY Small Sling Assembly 6,500 lb. MADE IN THE USA ADJUST LOCKING SLING 429-90401 RING MASTER O-RING AND LOCK RING INSTALLER 429-90402 429-90403 • Pushes & Holds rim flange & tire back for easy O-ring and lock ring installation • Lightweight and easy to use • PORTABLE: Fits in tire truck tool box • Eliminates use of boom crane & cumbersome tire tools • Easy one-man operation • Works on all 3-piece and 5-piece rim/wheels up to 30" in diameter • Great for tough to handle forestry tires/wheels • Eliminates danger of pushing equipment off jack with crane • MADE IN THE USA The Ring Master O-Ring and Lock Ring Installer in use. MADE IN THE USA PORTABLE The Earthmover Tire Bead Hook in use. ASCOT NO. MFG. NO. 429-90401 429-90402 429-90403 94010 94020 94000 DESCRIPTION CAPACITY Earthmover Tire Bead Hook 16,000 lb. Earthmover Tire Bead Hook 12,000 lb. Earthmover Tire Bead Hook 4,000 lb. ASCOT NO. MFG. NO. 429-70162 70162 429-70162 DESCRIPTION Ring Master O-Ring and Lock Ring Installer WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

182 TIRE & WHEEL SERVICE Cribbing Sets & Wheel Chocks CRIB STANDS FOR 55-TON CYLINDERS • Steel cribbing is durable, will not bend or warp • Recessed area on cribbing fits 7" square plate on 55-ton cylinders • Each unit contains a built in carrying handle • Tested/Certified up to 100 tons • Available in three sizes • Also available in a kit (Ascot No. 429-08074) that includes all three sizes ASCOT NO. MFG. NO. 429-08075 429-08076 429-08077 15012 15022 15032 429-08075 SUPER STACKER CRIBBING BLOCKS • 100% recycled plastic • Unmatched strength - stronger than wood • Resistant to gas, oil and chemicals • Certified tested • 50year warranty against splitting, rot, fluid absorption, termites or mold caused by the environment • Color-coded lanyards depcit each block's working load limit • MADE IN THE USA WILL NOT BEND OR WARP 429-08076 DESCRIPTION 3" Steel Crib Stand 6" Steel Crib Stand 9" Steel Crib Stand 429-08077 429-15230 100% RECYCLED PLASTIC STEEL CRIB KIT • Durable Steel Cribbing, will not bend or warp • MODEL 15002 IS A COMPLETE SET: 3", 6" and 9" stands • Units can be nested together for 18" of total lift • Recessed area on cribbing fits 7" square plate on 55-Ton Cylinders • Each unit has a carry handle 429-08074 429-15239 15239 429-1523 ASCOT NO. MFG. NO. 429-15230 15230 DESCRIPTION 6" x 7" x 24" Cribbing Block with Blue Lanyard, WORKING LOAD LIMIT: 110,010 lb. (49,900 kg) 6" x 7" x 24" Cribbing Block with Orange Lanyard, WORKING LOAD LIMIT: 129,631 lb. (58,800 kg) SUPER STACKER CRIBBING KIT • 100% recycled plastic • Unmatched strength - stronger than wood • Resistant to gas, oil and chemicals • Certified tested • 50-year warranty against splitting, rot, fluid absorption, termites or mold caused by the environment • Compatible with 14500-14503 & 14468LT Jack Plates• MADE IN THE USA 429The Steel Crib Stand in use. ASCOT NO. MFG. NO. DESCRIPTION 429-08074 15002 Steel Crib Kit ASCOT NO. MFG. NO. 429-15266 15266 DESCRIPTION KIT INCLUDES: (12) 15239 & (1) 14468LT BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 183 POLYURETHANE WHEEL CHOCKS POLYURETHANE WHEEL CHOCKS • Solid light weight construction, high impact polyurethane material • Non-conductive, no threat to puncture the tire • Durable, light weight, and easy to use • Extensively field tested • High-visibility yellow color • Rugged yet lightweight, weather-resistant Polyurethane wheel chocks • Safety yellow for high-visibility and meets OSHA/MSHA standards • Built-in carrying handle & holes for installation of ropes, chains and/or mounting brackets 396-12590 396-12593 396-15339 396-12594 396-15342 396-12596 SIZE SIZE ASCOT NO. MFG. NO. 396-15337 396-15338 396-15339 396-15342 15337 15338 15339 15342 TIRE SIZE 15.25" to 86.75" 71" to 118" 86.75" to 137.75" 110.25" to 177" (L X W X H) 18" x 12" x 9" 22.5" x 13" x 14" 24" x 13.5" x 12" 26.7" x 13" x 14" WEIGHT 13 lb. 19.8 lb. 24.3 lb. 30.86 lb. ASCOT NO. MFG. NO. 396-12590 396-12593 396-12594 396-12596 12590 12593 12594 12596 TIRE SIZE Up to 27 in. 46" to 65" Up to 65 in. Up to 165 in. (L X W X H) 8" x 7" x 6" 12.125" x 15.25" x 10.75" 16.25" x 14.5" x 13.25" 24.5" x 14.25" 16" WEIGHT 2 16 20 34 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

184 TIRE & WHEEL SERVICE Bead Seating Devices RPG 5-GALLON BEAD SEATERS • 5-gallon capacity • Equipped with a butterfly valve for maximum air discharge • Designed for commercial use on large truck tires, passenger and ATV tires to 24.5” • Rubber foot pads to lessen vibration • Made in Taiwan ASCOT NO. MFG. NO. 473-01500 473-02505 473-02501 DESCRIPTION RPG-05GAL RPG-05GALED RPG-05GALAL 5-Gallon Bead Seater with Butterfly Valve 5-Gallon Bead Seater with Butterfly Valve - End Discharge 5-Gallon Bead Seater with Butterfly Valve - ALUMINUM 473-02510 RPG 10-GALLON BEAD SEATERS • 10-gallon capacity • Equipped with a butterfly valve for maximum air discharge • Designed for commercial use on large truck tires, passenger and ATV tires to 24.5” • Made in Taiwan ASCOT NO. MFG. NO. 473-02510 473-02511 DESCRIPTION RPG-10GAL RPG-10GALAL 10-Gallon Bead Seater with Butterfly Valve 10-Gallon Bead Seater with Butterfly Valve - ALUMINUM 473-01500 473-02505 RPG 13-GALLON BEAD SEATER • Aluminum tank • 10-gallon capacity • Equipped with a butterfly valve for maximum air discharge • Designed for commercial large truck tires 24” to 54” • Made in Taiwan 473-02513 ASCOT NO. MFG. NO. 473-02513 DESCRIPTION RPG-13GALAL 13-Gallon Bead Seater with Butterfly Valve - ALUMINUM BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 185 BS-07 CHEETAH BEAD SEATER 5-GALLON CHEETAH BEAD SEATER • Makes seating the most difficult bead safe and simple • 5-gallon capacity • APPLICATIONS: Designed for commercial use on large truck tires, passenger and A tires to 24.5" • Fill tank from any service station chuck or service truck air compressor 473-00500 ASCOT NO. MFG. NO. 473-00500 473-00501 CH-5 CH-5AL DESCRIP 473-00207 Cheetah Bead Sea Same As Abo 10-GALLON CHEETAH BEAD SEATER • 10-gallon capacity with ASME certified tank • APPLICATIONS: Designed for small rear agri/grader or smaller tires; Standard for fleet work, farm and service trucks 13-GALLON CHEETAH BEAD SEATER • 13-gallon capacity with ASME certified tank • APPLICATIONS: Seats bead on tractor & heavy equipment tires from 24.5" to 54" • Includes a straight barrel, new Magnum barrel (for lar and safety goggles as standard equipmen • Extends tire • “End of Tank” discharge design, flared discharge barrel and a 2" discharge valve for maximum bead seating power • Makes seating the most difficult bead not only safe but simple, fast and economical • 5-gallon capacity, ASME certified tank • SIZE: 34"(L) x 12"(W) x 15"(H) ASCOT NO. MFG. NO. 473-00207 BS-07 DESCRIPTION BS-07 Cheetah 473-00013 ASCOT NO. MFG. NO. 473-00010 473-00011 CH-10 CH-10AL DESCRIPTION 10-Gallon ASCOT NO. MFG. NO 473-00013 CH-13AL 10-Gallon With Aluminum Tank VIPER™ BEAD SEATERS • Push button discharge • Unique handle design for stability and control • ASME Certified • Rapid release of air • Newly designed jet barrel for greatly increased air v • More power less air pressure • Reduces air noise • Greater air distribution • No wheel damage • Works on large range of tires ASCOT NO. MFG. NO. DESCRIPTION 473-01110 473-01113 473-01118 VP 10S Viper™ 11.5 Liter Bead Seater, Steel Tank VP 13AL Viper™ 13 Liter Bead Seater, Aluminum Tank VP 18AL Viper™ 18 Liter Bead Seater, Aluminum Tank *Please note we recommend the use of a good quality inline filter to remove contaminants and moisture. *Please note we recommend the use of silicone spray or air tool oil occasionally to properly maintain the valve. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE 473-01110 DISCHARGE TIRE & WHEEL SERVICE REPLACEMENT PARTS AVAILABLE

186 TIRE & WHEEL SERVICE R JET PAK BEAD SEATER UPGRADE DEVICE • Faster and easier than standard ball or butterfly discharge valve operation • Discharges tank with the press of a button • Safety cover prevents accidental trigger release • TWO PORT SIZES AVAILABLE: CH1.5JP (1.5") and CH2.0JP (2") to fit any standard bead seater in a variety of tank sizes • Attaches easily to existing pipe nipple, replacing manual discharge valve • Includes our new improved Jet Barrel (VP 3.103 or VP 2.103) for greater air volume delivery • Comfortable handle assures firm grip and ease of use • All internal components can be removed and serviced if required GAITHER RAR VALVE UPGRADE KITS • The Gaither RAR Valves are the most powerful inflation valves available - same as used on the popular Bead Bazookas • 1.5" and 2" available to upgrade your current inflation tank • Completely serviceable!! This means that if something should become defective down the road, the seal, valve, spring or all three can be replaced! • Push-button release trigger allows technician to keep both hands on the tank for optimum control during use • Reversible handle allows for both right hand and left hand users based on preference • Each valve includes a barrel for immediate use after installation BEAD SEAT BAND INSTALLER • Uses hydraulic force to install bead seat bands in earthmover tires • 25 tons of hydraulic force to ensure that all bead seat bands are installed effortlessly • The angled plate rests against a large section of the tire, ensuring protection of the bead during installation • WEIGHT: 40 lbs (18.1 kg) EASY-LIFT™ BEAD SEATING STAND • Portable for field service, or can be bolted to the floor • With hub facing out, simply roll mounted tire and wheel assembly to front of stand • Push assembly onto crown – tire and wheel will automatically fall onto center of stand and rest with bead centered on bottom wheel flange • Seat beads by inflating tire to 4 PSI (max.) • Step around stand and easily lift assembly into vertical position • Roll assembly into tire inflation safety cage for final inflation • SIZE: 4"H x 26"W x 27"L • Made of high grade steel HIGH GRADE STEEL PORTABLE IF NEEDED 473-12941 429-11900 USES HYDRAULIC FORCE 473-36016 ASCOT NO. MFG. NO. 473-00020 DESCRIPTION CH-2.0JP Jet Pak Bead Seater Upgrade Device - 2" Port Size 473-00015 CH-1.5JP Jet Pak Bead Seater Upgrade Device - 1.5" Port Size 473-12942 HEAVY DUTY ASCOT NO. MFG. NO. DESCRIPTION 473-12941 12941R 473-12942 ASCOT NO. 473-36016 MFG. NO. DESC. 36016 Std. Crown for 8-3/4" Dia. Hubs 1.5" RAR Valve Upgrade Kit 12942R 2" RAR Valve Upgrade Kit 473-36017 ASCOT NO. MFG. NO. DESCRIPTION 429-11900 11900 Bead Seat Band Installer 36017 Large Crown for 11" Euro Hubs WEIGHT 16,000 lb. 12,000 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 187 SMALLER & MORE POWERFUL • Smaller and more powerful than previous designs • Serviceable/Replaceable 2’’ RAR valve • Utilizes ultra-compact design • Anti-corrosion interior tank coating • Perfect for motorcycle, cars, or light commercial vehicle tire service (3L2) • Perfect for cars and commercial vehicle tire service (6L2) • Perfect for commercial and light agricultural vehicle tire service (10L2) UPGRADED RELEASE VALVE 473-00103 ASCOT NO. MFG. NO. 473-00103 473-00106 473-00110 473-00100 GBB3L2 GBB6L2 GBB10L2 BBVRK DESCRIPTION WEIGHT DIMENSIONS INNER DIAMETER Bead Bazooka 3L2 14 lbs. 23" x 6" x 12" 4 in. Bead Bazooka 6L2 15 lbs. 23" x 7" x 12" 4.75 in. Bead Bazooka 10L2 18 lbs. 30" x 7" x 12" 5.5 in. N/A N/A Bead Bazooka N/A 473-00106 The Bead Bazooka® 3L2 in use. 473-00110 BEAD BAZOOKA® SPARE PARTS: ASCOT NO. MFG. NO. 473-12913 473-12914 473-12915 473-12916 473-12917 473-12919 473-12920 473-12921 473-12923 473-12930 DESCRIPTION 12913B 12914B 12915B 12916B 12917B 12919B 12920B 12921B 12913BC 12930M Slotted Double Barrel Pressure Gauge Y-Connect Intake Valve Safety Valve Switch Valve Grip with Trigger Guard Plastic Plug Slotted Double Barrel without Clip F3 Connector 473-12916 473-12923 473-12914 473-12930 473-12917 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

188 TIRE & WHEEL SERVICE Bead Seating Devices (cont.) GAITHER’S BEAD SAVER SYSTEM O • By using simple principles of leverage, the Bead Saver System actually works with tire and rim to do the work for you • Patented design • Safest, fastest, easiest way ever invented to change tubeless truck tires • Guaranteed not to damage tire beads ASCOT NO. MFG. NO. DESCRIPTION 448-12880 12880 5-GALLON BEAD BOOSTER • Creates a blast of air used for seating tubeless tire beads • Release valve safety lock prevents inadvertent discharge • Powder-coated inside and out to protect from rust and deterioration caused by moisture • Double Barrel directs the air around the tire for a better “lift” • Safety pop-off valve prevents overloading with too much air pressure ASCOT NO. MFG. NO. 473-00005 GB-5Z DESCRIPTION 5-Gallon Bead Booster 5-GALLON BEAD BOOSTER WITH MIS VALVE • The BEAD BOOSTER® GB-5M comes equipped with the same MIS valve as the famous BEAD BAZOOKA® Tommy Gun giving it the ability to seat almost any tire • CE/ASME certified tank • New MIS valve with a 2" opening • Internal proprietary coating protects against rust • Includes Gaither’s trusted 3 year warranty ASCOT NO. MFG. NO. DESCRIPTION 473-42561 GB-5M 5-Gallon Bead Booster with MIS Valve GAITHER J1 MOUNT/DEMOUNT TOOL 448-00001 • Slightly altered and condensed version of the original Bead Saver System • 2-piece system that mounts and dismounts all standard 19.5", 22.5" and 24.5" tubeless tires up to a 315/80R22.5, including those mounted on aluminum wheels • Differs from the original system in that each process is done completely while the tire is flat on the ground • The first Bead is dismounted with the clevis & crook/spoon end • The second Bead is dismounted with the J-1 end without picking the tire up • The first bead can be mounted with the J-1 end • The second Bead is mounted with the spoon end • Two Beadkeepers can be used to assist with mounting ASCOT NO. MFG. NO. DESCRIPTION 448-00001 J1 Mount/Demount Tool GAITHER SUPER SLICK'EM™ • Gaither’s Super Slick’em™ should be applied to all tires before being mounted or before deflation if being dismounted • Super Slick’em™ is a special nonwater based lubricant that penetrates and aids in breaking the tire bead from the wheel by eating away rust and grease. Because it does not contain water, Super Slick’em™ will not freeze or cause rust to form • SUPER SLICK’EM™ 12904 INCLUDES: 4-1 gallon (3.8 liter) containers and 1 applicator bottle ASCOT NO. MFG. NO. 421-12904 G12904 DESCRIPTION Gaither Super Slick'em™ WILL NOT FREEZE 421-12904 473-42561 473-00005 Bead Saver System B A E M N K F D C G H J I L R P Q BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 189 AIR BLAST BEAD SEATER FOR SMALL TIRES • Fast and easy way to seat beads in one simple operation • Sea the bead on most small tubeles tires with rims ranging from 4 to 12" • ONE-MAN OPERATION: just point and release YELLOW RUBBER COATED BEADKEEPER • Keeps truck tire bead from slipping during mounting of top bead • Rubber coated steel construction • Will not scratch aluminum wheels • Great for hard to mount tires, a must for all super singles • Equivalent to Gaither 12894C & ESCO 70140 ASCOT NO. MFG. NO. DESCRIPTION 448-12894 12894C 4 BLUE WIDE MOUTH RUBBER COATED BEADKEEPER ASCOT NO. MFG. NO. WEIGHT 473-31440 31440 5. • Wider mouth works on newer, wider Alcoa wheels • Keeps truck tire bead from slipping during mounting of top bead • Rubber coated steel construction • Will not scratch aluminum wheels • Great for hard to mount tires, a must for all super singles • Equivalent to Gaither 12894-CW ASCOT NO. MFG. NO. 448-32894 PNEUMATIC BEAD EXPANDERS • Fits most bias ply passenger tires • Pliable neoprene rubber tube encased in tough nylon cover • Withstands contact with oil, grease, solvents and acid STEEL BEADKEEPER • THE ORIGINAL BEADKEEPER® • Used to hold a tire bead in place during the mounting process • Eliminates the need to stand on the tire and/or use a second mounting bar 471-31432 ASCOT NO. MFG. NO. DESCRIPTION 448-22894 12894 448-22894 Steel Beadkeeper DESCRIPTION 12894-CW Wide Mouth Blue Rubber Coated Beadkeeper 448-12894 Yellow Rubber Coated Beadkeeper 448-32894 BEADKEEPERS-ON-A-ROPE • Used to hold the tire in place while mounting the second bead • These tools eliminate the dangerous job of standing on the tire in order to mount it • After the first bead is mounted, simply place two Beadkeepers on the flange of the wheel and spread them apart as far as possible; Use the Spoon End of the bar to mount a small part of the bead and slide the closest Beadkeeper to the bar; Repeat this step until the entire second bead is mounted ASCOT NO. MFG. NO. MIN./MAX. DIAM. TUBE DIAM. 2-1/4" 3/4" 471-31432 471-31433 31432 31433 24"-34" 22"-32" WEIGHT 2.8 lb. .75 lb. ASCOT NO. MFG. NO. 448-42894 DESCRIPTION 12894-P Beadkeepers-On-A-Rope 448-42894 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

190 TIRE & WHEEL SERVICE Chloride Pumps VALVE ADAPTER GUN • Will attach to any calcium tire filling pump • 1/2" female pipe thread • Will extract valve core from a standard bore valve or core housing from tractor valve • Securely holds valve core or core housing up in the gun body during the filling or evacuation of liquid from tire CALCIUM CHLORIDE PUMP • Now available with polyvinyl valve (Model #10509) or anodized aircraft aluminum valve (Model #10509M) • Pumps 34 gallons of calcium chloride per minute • Newly designed valve will not leak • Spring reinforced hoses for fill and evacuate • Comes complete with valve adapters for all valves (large bore and standard) • Gauges are protected • Unit is portable or can be mounted in tire service trucks • Double diaphragm pump, 1 to 1 ratio • 10' hoses gives plenty of room to operate • Includes hoses & calcium tire filled gun • USA MADE PUMP MADE IN THE USA 464-00310 475-11590 ASCOT NO. MFG. NO. DESCRIPTION 475-10509 475-11590 10509 10509M 4-WAY VALVE GRACO CALCIUM CHLORIDE PUMP • 50-gallon (189 liter) per minute capacity; 1 to 1 ratio double diaphragm pump • WEIGHT: 38 lb. (17.2 kg) • Pump only P/N 15091, pump with quick connectors 15090-Q ASCOT NO. MFG. NO. 464-00134 FP-134 464-00135 FP-135 464-00136 FP-136 464-00137 FP-137 464-00138 FP-138 DESCRIPTION VALVE ADAPTER GUN PARTS Large Bore Core Remover Adapter For Standard Valve O-Ring For FP-135 Standard Valve Core Remover Ejector Union With FP-136 O-Ring 464-00139 FP-139 Gasket 464-00140 FP-140 464-00141 Stem FP-141F 464-00142 FP-142 464-00143 FP-143 464-00144 FP-144 464-00145 FP-145 464-00146 FP-146 Adapter Body Stem Sealing Nut O-Ring For FP-142 Hand Wheel Lock Nut Teflon Gasket ASCOT NO. MFG. NO. 15090 475-15090 DESCRIPTION GRACO Calcium Chloride Pump Calcium Chloride Pump with Polyvinyl Valve Calcium Chloride Pump with Aircraft Aluminum Valve 475-15090 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 191 DOUBLE DIAPHRAGM CALCIUM CHLORIDE PUMP • No lubrication required • Self-priming, non-stalling, low noise level 475-15103 • Diaphragms have no stress points and less flex for longer life • No gradual loss of pump performance due to wear • Can run dry indefinitely • Protected by an air filter/regulator • 35 gallon per minute free flow 475-30280 475-30281 ASCOT NO. MFG. NO. 475-15103 475-30280 475-30281 15103 A3028 HL-B DESCRIPTION Double Diaphragm Calcium Chloride Pump Replacement 4-Way Valve for Calcium Chloride Pump Replacement Handle for Calcium Chloride Pump 4-Way Valve “WONDER PUMP” PNEUMATIC DOUBLE DIAPHRAGM CALCIUM CHLORIDE PUMP • No lubrication required • Self-priming; non-stalling; low noise level • Diaphragms have no stress points and “less flex” for longer life • No gradual loss of pump performance due to wear • Can run dry indefinitely • Protected by an air filter/regulator • 4-WAY VALVE: 1/4 turn reverses the flow - no need to change hoses • 35 gallon per minute free flow 475-18001 ASCOT NO. MFG. NO. DESCRIPTION “WONDER PUMP” PARTS & ACCESSORIES 475-13011 475-13018 475-13019 475-13021 475-13022 30A-11 30A-18 30A-19 30A-21 30A-22 475-13026 30A-26 475-13027 30A-27 475-82515 682515 475-13028 30A-28 475-13029 30A-29 475-13030 30A-30 475-13031 475-13032 475-13033 30A-31 30A-32 30A-33 475-13034 30A-34 475-12532 25A-32 310 Calcium Gun 3/4" Brass Quick Coupler-Hose Saver 3/4" Brass Plug - Hose Saver (Needed for 30A-18) 1/2" Brass Quick Coupler - Calcium Gun 1/2" Brass Plug - Calcium Gun (Needed for 30A-21) 1/8" Back Mount Air Gauge - 0-100 PSI 2-1/2" Dia. S.S. 1/4" Back Mount Press/Vac Gauge - 30/0/150 Glycerin Filled Extra Large Exhaust Muffler 3/4" Brass 4-Way Directional Valve w/ O-Ring Seals w/ Handle Handle for 30A-28 10' Supply Hose (3/4" x 1" MPT Ends) 300 PSI - Wingfoot 15' Fill/Evac Hose (3/4" x 1/2" MPT Ends) 300 PSI - Wingfoot PVC Suction Bypass Hose for Silver Pump 1" FPT Stainless Steel Strainer for 30A-30 Prior to 2002 3/4" FPT Stainless Steel Strainer for Current 30A-Plus PVC Bypass Hose for Black Pump WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

192 TIRE & WHEEL SERVICE Mount/Demount Tools GOLDEN TOOL TUBELESS TRUCK TIRE MOUNT/DEMOUNT TOOL • Demounts most tubeless tires in 8 seconds with ease - remount them in 20 seconds with equal ease - all without the need to lift tire and rim to remove rear bead • Demounts/mounts 17.5" to 44.5" tires • APPLICATIONS: Use on tubeless truck tires including super single/duplex tires, radial and bias • For Dayton-type wheels (centerless) and Budd type disc wheels • Eliminates the need to lift tire and rim to remove the bottom bead, preventing possible strain or even serious injury MADE IN THE USA 448-00101 TUBELESS TRUCK TIRE DEMOUNT TOOL • High Quality, economical price • Nylon rollers • 3-Step demount of 22.5 and 24.5 tires • Parts Available 448-00400 HIGH QUALITY ASCOT NO. MFG. NO. 448-00400 EZT-100D 448-00202 BL-100 BEAD LOCK 448-00201 • Helps prevent bead damage • Large roller directs bead into drop center, making tire mounting easier • Prevent damage to rims • Tool will not slip or dislodge during the mounting process QUICK AND EASY 448-00301 ASCOT NO. MFG. NO. 448-00100 448-00101 448-00200 448-00201 448-00202 448-00301 TNT-100 TNT-100-1 TNT-200 TNT-200D TNT200M TNT-300-1 DESCRIPTION Tire Mount/Demout Tool Complete Demount Tool Only (17.5-31.5) Super Single Tire Mount/Demount Tool Super Demount Tool (17.5-44.5) Single Mount Tool New 445 Super Single Demount Tool (17.5-X1) 448-01100 ASCOT NO. MFG. NO. DESCRIPTION 448-01100 BL-100 Bead Lock BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 193 HEAVY DUTY STEEL STEEL TRUCK BEAD HOLDER • Clamps securely to the wheel to prevent tire from “walking” • Eliminates the use of vise grips which can damage wheels • For use with automatic tire changers and/or manual tire changing tools • Heavy duty steel construction ASCOT NO. MFG. NO. DESCRIPTION 448-00010 BJ-BP10 Steel Truck Bead Holder NYLON ROLLERS PROTECT BEAD 448-12320 GOLDEN BUDDY TIRE CHANGING SYSTEM • Mount and demount tool assemblies for 22.5 & 24.5 tires/wheels • Heavy duty steel construction ensures long life • Nylon rollers protect the bead • Bead holder • WEIGHT: 32 lb. (14.5 kg) • Sold as a complete set ASCOT NO. MFG. NO. DESCRIPTION 448-12320 448-22320 448-32320 71050 71051 71052 Golden Buddy Tire Mount/Demount Tool Set Golden Buddy Dismount Assembly Golden Buddy Mount Tool Assembly EASY BUDDY TIRE DEMOUNT TOOL • Mount and dismount tire assemblies for 22.5 and 24.5 tires/wheels • Eas follow instructions • WEIGHT: 35 lb. (16 kg) • Includes top bead removal t and bottom bead removal tool • Includes Rim Protector to prevent rim sc INCLUDES RIM PROTECTOR ASCOT NO. MFG. NO. DESCRIPTION 448-71000 71000 448-71000 Easy Buddy Tire Demount Tool WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

194 TIRE & WHEEL SERVICE Mount/Demount Tools (cont.) TRUCK TIRE DEMOUNT & MOUNTING TOOL KITS TYR-X TRUCK TIRE DEMOUNT SYSTEM • A safe, quick, and reliable tire demounting tool that makes tire demounting a simple process • The pivot hooks ensure easy and positive operation and its design eliminates aggressive stretching of the tire bead • One of the easiest and fastest manual truck tire demounting tool on the market • Works on standard truck tires (22.5-24.5) and can be used for the first bead of super singles or double wide truck tires • WEIGHT: 17 lb. (8 kg) 402-20397 402-90518 ESC100 Kit ASCOT NO. 402-90518 402-90519 MFG. NO. 90518-100-KIT 90518-200-KIT 402-90519 ESC200 Kit DESCRIPTION ESC100 Kit - INCLUDES: 90518-100-1 Demounting Tool, 90518-200M Mounting Tool & 70141 Bead Holder ESC200 Kit - INCLUDES: 90518-200-1 Demounting Tool, 90518-200M Mounting Tool & 70141 Bead Holder 402-20396 UNIVERSAL DEMOUNT TOOL - HEAVY DUTY TIRE KIT 402-20406 • Safe, simple, fast, economical, and the most universal tire demounting system on the market • Works as a hand-held tire machine and shines where other tools fall short • Tackles the hard 19.5 reverse hubs and grader tires and can be used on all tire sizes from 10” ATV tires and up • Great for agricultural tires, one-piece grader, loader, forestry and backhoe tires ASCOT NO. 402-20415 MFG. NO. 20415 402-20430 ASCOT NO. MFG. NO. 402-20396 20396 DESCRIPTION Universal Demount Tool - Heavy Duty Tire Kit - INCLUDES: 20408 Universal Demounter, 20404 52" Mounting Bar, 20403 35" Mounting Bar, 20406 Pair of HD Bead Holders 402-20397 402-20406 402-20430 20397 20406 20430 DESCRIPTION Demount Tool, Truck Tire, "Tyr-X", All In One Demount System Bead Wedge (Puts Tire In Drop Center) Bead Holder, Commercial Truck Tires (Pair) Mounting Bar, Truck Tires BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 195 R BLUE COBRA™ TRUCK TIRE DEMOUNT TOOL SUPER SERPENT DEMOUNT TOOL 402-35440 • Ergonomic shaped steel handle with no-slip grip for optimum leverage • APPLICATIONS: Change nearly any 20", 22.5" and 24.5" tube-type and tubeless truck tires, up to a 13" wide one-piece wheel ASCOT NO. MFG. NO. 402-35440 35440 LENGTH 54" WEIGHT 22 lb. • At only 5-1/2 pounds, this unique, lightweight demount tool for super singles can be lugged around on a fingertip • Delivers incredible leverage right where it’s needed 402-02006 ASCOT NO. MFG. NO. 402-02006 T2006 TIRE MOUNT TOOL • Demounts both beads on most truck tires with the need for lifting the tire/wheel assembly off the ground and then dropping it • Heat-tr ASCOT NO. MFG. NO. 402-02001 T2001 LENGTH 39" STOCK 3/4" WEIGHT 6.5 lb. GENERAL PURPOSE TIRE IRONS TIRE SPOONS • General purpose tire irons for all mounting and demounting needs • APPLICATIONS: Use 18" and 24" spoons to mount or demount passenger car, motorcycle, ATV and light truck tires; 30" spoons provide enough strength and leverage to work on large truck, bus, off-road vehicle, tractor and aircraft tires LENGTH 37" STOCK 3/4" WEIGHT 5.5 lb. HEAVY DUTY & DURABLE TIRE MOUNT TOOL ASCOT NO. MFG. NO. • Wing shaped designed to stop against rim, remove itself from between rim and bead • Small end gets under stretched bead for last pull 402-02002 ASCOT NO. MFG. NO. 402-02002 T2002 LENGTH 38" STOCK 11/16" WEIGHT 4 lb. 402-32101 402-32119 402-33022 402-33219 402-33238 402-02100 402-02101 402-02102 402-33020 402-33024 SUPER SERPENT MOUNT TOOL • It may seem funny looking, but every inch of this innovative design is purely serious • Delivers Twice the leverage of any “Straight-type” tire mounting tool 402-02005 ASCOT NO. MFG. NO. 402-02005 T2005 LENGTH 37" STOCK 3/4" WEIGHT 6.6 lb. 402-31820 402-32102 402-32120 402-32420 402-33021 402-33052 402-33062 402-33220 402-33239 T1X T19 LENGTH STOCK WEIGHT 33022 T19A T38 T21R T21F A. STRAIGHT 18" 24" 30" 30" 30" T21HD 33020 33024 31820 T2X T20 B. DROP-CENTER 18" 24" 30" 30" 30" 32420 33021 33052 33062 T20A T39 C. CURVED 18" 18" 24" 24" 30" 30" 30" 30" 30" 11/16" 11/16" 3/4" 11/16" 7/8" 11/16" 11/16" 7/8" 11/16" 3/4" 11/16" 11/16" 11/16" 11/16" 11/16" 3/4" 7/8" 11/16" 7/8" 1.8 lb. 2.5 lb. 3.4 lb. 3 lb. 4.8 lb. 1.8 lb. 2.5 lb. 4.5 lb. 3.1 lb. 3.4 lb. 1.8 lb. 1.8 lb. 2.4 lb. 2.5 lb. 3.1 lb. 3.1 lb. 3.4 lb. 3.1 lb. 4.5 lb. A B C WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

196 TIRE & WHEEL SERVICE R Mount/Demount Tools (cont.) IRONMAN™ ERGONOMIC WHEEL LIFTING BAR • Easily and safely lift heavy, awkward truck tire and wheel assemblies • Extremely useful in outdoor conditions when truck tire and wheel assemblies can become wet & slippery • Protect your workers and yourself: reduce injuries & claims, keep insurance premiums down • Specially designed forged ends work from either side of the wheel assembly as it lays flat • APPLICATIONS: Lift all sizes and types of small and large heavy truck wheels: Standard sizes including 22.5" and 24.5" wheels, plus European (which have 1" lug holes), Super Wide and even the Super Single (a 340 lb. assembly) size NINETEEN-FIVE™ TIRE MOUNTING & DEMOUNTING TOOL SET FOR 19.5" TRUCK TIRES • New tire bar uniquely designed to work on hub side of wheel, where hub protrudes above rim • Specially designed ends manipulate tire with less effort • Forged from high-grade carbon steel and heat-treated for longlasting strength and durability • APPLICATIONS: Specially designed Bead Holder to hold bead on 19.5" aluminum wheels • Solid brass Bead Holder for steel wheels • Aluminum Wheel Protector - thick leather pad helps protect rims from marring and scratching 472-31810 472-31710 ASCOT NO. MFG. NO. EASY AND SAFE TO USE LIFT ALL SIZES & TYPES OF TIRES 402-34950 402-33195 472-31710 472-31810 402-33196 402-33199 33195 31710 31810 33196 33199 DESCRIPTION LENGTH WEIGHT NINETEEN-FIVE™ TIRE MOUNTING & DEMOUNTING TOOL SET Nineteen-Five™ Tire Mounting and Demounting Set. INCLUDES: 31710, 31810, 33196, 33199 Bead Holder for Steel Wheels - Solid Brass Aluminum Wheel Protector - Leather Bead Holder for 19.5" Aluminum Wheels Tire Mounting/ Demounting Tool 7-1/2" 38" 3 lb. 2.5 lb. 402-33199 4-1/2" 6" 2.5 lb. 3.4 lb. 402-33196 BEAD HOLDER • Holds the bead in place against the wheel when mounting the tire on the wheel • 31713 Bead Holder works on Super Singles and Super Wides 472-31710 ASCOT NO. MFG. NO. MATERIAL STOCK WEIGHT 472-31710 472-31713 31710 31713 Solid Brass 1.4 lb. 1.8 lb. Aluminum Bead Holder - Works on Super Singles 472-31713 ALUMINUM WHEEL PROTECTOR • Protects wheel rims from damage • U.S. Patent No. 6,991,018 The Ironman™ Ergonomic Wheel Lifting Bar in use. 472-31810 ASCOT NO. MFG. NO. 402-34950 34950 LENGTH 58" WEIGHT 10 lb. ASCOT NO. MFG. NO. WEIGHT 472-31810 31810 12 lb. (5.4 kg) BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 197 R CLASSIC TUBELESS TIRE IRON • Ken-Tool’s patented designs offer one-piece construction and assure long life for many tire changing applications • Tip ends insert easily and will not cut or rip bead or sidewall • These designs make it easier to mount and demount tires without changing the way the tool is used • MOUNT END: Precision-forged knob grips rim. Tip designs won’t slip during tire mounting. Special curve design always grabs the bead edge • DEMOUNT END: Precision-forged angled tip slides between bead and rim easily. Forged design won’t slip when demounting the second bead TIP ENDS INSERT EASILY Small Mount/ Demount Tools PRECISIONFORGED ENDS Design based on popular European styles. Extended length of the flat curved sliding surface provides comparable mounting ability of much longer traditional tire irons. TIRE IRONS - SMALL TIRE • Pro tire changing tools for small tires • APPLICATIONS: Ideal for mounting and demounting motorcycle, ATV, lawn, golf cart and small tires by hand • Rounded ends will not pinch tube 402-34645 ASCOT NO. MFG. NO. 402-34645 402-34649 T45AC T45AS LENGTH 37" 52" STOCK 3/4" 7/8" WEIGHT 4.6 lb. 8.25 lb. 402-00050 402-00080 402-00060 402-00180 402-00900 TUBELESS TIRE IRON SETS • Sets provide all irons necessary for a variety of tire changing applications • APPLICATIONS: Use C bar with the B extension bar for easier use on large, wide-base truck tires; Use on standard and large truck tires, including industrial, farm, buses and tractors ASCOT NO. MFG. NO. DESCR. 402-46000 T46 Tire Iron Set. INCLUDES: T46A, T46B, T46C 402-46001 T46A Med. Duty Mount/ Demount Iron 402-46002 T46B Mount/ Demount Iron 402-46003 T46C Offset Bar For Deep Well Tires HEAVY 402-47000 T47 Tire Iron Set. INCLUDES: T47A, T47B, T47C 402-47001 T47A Ultra Duty Mount/ Demount Iron 402-46003 402-47002 T47B Mount/ Demount Iron 402-47003 T47C Offset Bar For Deep Well Tires 49-1/2" 1" 27" 1" 11 lb. 6.66 lb. ASCOT NO. MFG. NO. 402-04300 402-04301 402-04401 T43C T43D T44 LENGTH STOCK WEIGHT 7/8" 21" 30" 31" 7/8" 7/8" 3.1 lb. 4.5 lb. 5.3 lb. — 1" 29 lb. 52" 1" 11 lb. 402-04300 402-04301 402-04401 36" 22" 3/4" 3/4" 4.5 lb. 3 lb. 402-46002 402-46001 EUROPEAN STYLE TOOLS • APPLICATIONS: Use on car, motorcycle, truck and agricultural tires • Designed for mounting and demounting tires • Best if used in pairs LENGTH STOCK WEIGHT ADAPTER PLUGS — 3/4" 36" 3/4" 12 lb. 402-04311 4.5 lb. ASCOT NO. MFG. NO. 402-04311 T43A LENGTH STOCK 3/4" 15" WEIGHT 1.8 lb. ASCOT NO. MFG. NO. 402-00050 402-00060 402-00080 402-00160 402-00900 402-01160 402-01900 T5 T6A T8 T16A T9A T16C T9C LENGTH STOCK .8 Lbs 5/8" 16" 16-1/2" 16" 16" 9" 1.5 lb. .8 Lbs 7/16" 7/16" .7 lb. .4 lb. 2 Piece Set. INCLUDES: (2) T16A 16" Bars 2 Piece Set. INCLUDES: (2) T9A 9" Bars MOTORCYCLE/SMALL WHEEL TIRE TOOL WEIGHT WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

198 TIRE & WHEEL SERVICE R Lock Ring Tools TRUCK LOCK RING REMOVER • APPLICATIONS: Designed for small diameter wheels ASCOT NO. MFG. NO. 402-32128 T27A 402-32123 ASCOT NO. MFG. NO. 402-32123 402-33223 T23 T23A LENGTH 24" 30" DIAMETER 11/16" 11/16" WEIGHT 2.4 lb. 3.1 lb. HEAVY DUTY LOCK RING TOOL • APPLICATIONS: Use for multi-piece wheels, especially hub type 402-34648 COMBINATION RIM/RING TOOL • Flat tapered end • APPLICATIONS: Ideal for all around ring and rim work 402-33224 ASCOT NO. MFG. NO. 402-33224 T23B LENGTH 23-1/2" DIAMETER 11/16" WEIGHT 2.4 lb. ASCOT NO. MFG. NO. 402-34648 T48A LENGTH 37" DIAMETER 3/4" WEIGHT 4.6 lb. LOCK RING TOOL • APPLICATIONS: Removes continuous side rings on two-piece truck rims 402-32128 LENGTH 18" DIAMETER 11/16" WEIGHT 1.8 lb. INDUSTRIAL WHEEL LOCK RING TOOL SET RIM LOCK TOOL • APPLICATIONS: For servicing wide base rims 402-32125 ASCOT NO. MFG. NO. 402-32125 T25 LENGTH 18" DIAMETER 5/8" WEIGHT 1.8 lb. HIGH GRADE CARBON STEEL SPECIAL LOCK RING TOOL • Long tapered curved end • APPLICATIONS: For continuous side rings ASCOT NO. MFG. NO. 402-32127 ASCOT NO. MFG. NO. 402-32127 T27 LENGTH 18" DIAMETER 11/16" WEIGHT 1.8 lb. 402-32130 402-32131 32130 32131 DESCRIPTION LENGTH INDUSTRIAL WHEEL LOCK RING TOOL SET PARTS Mount/Demount Tool Demount Prep Tool 15-3/4" 15-1/2" ASCOT NO. MFG. NO. 402-32129 32129 DESCRIPTION 2 Pc. Industrial Wheel Lock Ring Set WEIGHT 1.8 lb. 1.5 lb. • Helps prevent injury, easier to keep hands safely outside of press cage • Bright orange color helps prevent lost tools • Forged from high-grade carbon steel and heat-treated for long lasting strength and durability • SET INCLUDES: #3130 Mount/ Demount Tool: Demount end lifts split ring progressively around wheel until fully demounted, mount end used to mount split ring; #3132 Demount Prep Tool: Separator end separates split ring from solid flange ring to form gap, pry-out end reaches behind slotted end of split ring to pry in out and over the flange of the wheel BRIGHT ORANGE COLOR 402-32129 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 199 Heavy Duty Hammers R WOODEN HANDLE HAMMERS • Used for mounting and demounting tires • APPLICATIONS: Makes tire changing easier for passenger car, truck, bus, farm tractor and aircraft tires FIBERGLASS HANDLE HAMMERS 425-35421 425-35321 425-35105 425-35423 425-35325 425-35323 425-35425 ASCOT NO. MFG. NO. HANDLE NO. 425-35321 425-35323 425-35325 425-35105 T34 T35 T36 T34RH T11CH T11CH T11CH LENGTH 17" 16-1/2" 16-1/2" WEIGHT 4.8 lb. 5.5 lb. 5.8 lb. ASCOT NO. MFG. NO. HANDLE NO. LENGTH HEAD WEIGHT WEIGHT 425-35421 425-35423 425-35425 TG34 TG35 TG36 Rubberhead Replacement TG11CH TG11CH TG11CH 18" 18" 18" 5.5 lb. 4.8 lb. 5.8 lb. 6 lb. 6.6 lb. 6 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

200 TIRE & WHEEL SERVICE R General Purpose Hammers & Wedges WOODEN HANDLE HAMMERS • Designed for tire service in variety of sizes DUCK BILLED BEAD BREAKING WEDGES - WOOD HANDLED 426-35311 426-35317 ASCOT NO. MFG. NO. HANDLE NO. 426-35311 426-35317 T11B T33R T11BH T11HN LENGTH 14-1/2" 14" WEIGHT 4.5 lb. 2.3 lb. ASCOT NO. MFG. NO. HANDLE NO. 424-35327 424-35329 T11D T11E T11DH T11EH 424-35329 LENGTH 17" 30" WEIGHT 4.8 lb. 9.2 lb. FIBERGLASS HANDLE HAMMERS DUCK BILLED BEAD BREAKING WEDGES-FIBERGL 426-354 ASCOT NO. MFG. NO. HANDLE NO. 426-35411 426-35417 TG11B TG33R TG11BH TG31H LENGTH 16" 16" WEIGHT 4.8 lb. 2.5 lb. DUCK BILLED POLYMER HANDLED BEAD BREAKING WEDGE DOUBLE FACED SLEDGE HAMMER • High carbon steel, heat treated • Machined, polished face • Top grade U.S. hickory handle HIGH CARBON STEEL 428-37304 ASCOT NO. MFG. NO. 428-37302 428-37304 428-37308 428-37310 428-37312 428-37316 428-37320 84H-2 84H-4 84H-8 84H-10 84H-12 84H-16 84H-20 HANDLE LENGTH. 15" 15" 32" 36" 36" 36" 36" FACE 1-1/2" 1-3/4" 2" 2-1/8" 2-1/8" 2-3/8" 3" EYE SIZE 3/4" x 1" 3/4" x 1" 1" x 1-3/8" 1" x 1-3/8" 1" x 1-3/8" 1" x 1-3/8" WEIGHT 2 lb. 4 lb. 8 lb. 10 lb. 12 lb. 16 lb. 2" x 1-1/2" 20 lb. 2 LB. RUBBER MALLE • Rubber head prevents marring surf 426-35310 ASCOT NO. MFG. NO. HANDLE LENGTH 426-35310 T32 17" WEIGHT 2 lb. RUBBER HEAD ASCOT NO. MFG. NO. HANDLE NO. 424-35460 429-35230 T11K T11KH T11KH LENGTH 32" WEIGHT 10.5 lb. Replacement Handle for T11K • Hump design prevents tool from w rim and bead • Breaks bead with lit no prying • New polymer handle design with fiberglass core 424-35460 POLYMER HANDLE DESIGN ASCOT NO. MFG. NO. HANDLE NO. 424-35427 424-35429 TG11D TG11E TG11DH TG11EH LENGTH 18" 32" WEIGHT 4.8 lb. 9.1 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 201 R CROSS-PEIN/BLACKSMITH HAMMER 426-37103 ASCOT NO. MFG. NO. 426-37103 85H-3 HANDLE LENGTH. 16" FACE 1-5/8" EYE SIZE 1" x 1-3/4" WEIGHT 3 lb. NEW ENGLAND PATTERN HANDDRILLING HAMMERS 426-37003 ASCOT NO. MFG. NO. 426-37003 426-37004 80H-3 80H-4 HANDLE LENGTH. 10-1/2" 10-1/2" FACE 1-1/2" 1-5/8" EYE SIZE 1"x 3/4" 1"x 3/4" WEIGHT 3 lb. 4 lb. ASCOT NO. MFG. NO. 429-35229 TG11EH TIRE KNOCKER FIBERGLASS REPLACEMENT HANDLES 426-35110 ASCOT NO. MFG. NO. HANDLE LENGTH. 426-35110 35110 18" WEIGHT .7 lb. DEAD BLOW HAMMERS • Economy version for DIYers or home workshops • One-piece polypropylene outer jacket provides a lifetime of use • Head is shot-filled for maximum force with no bounce effect 426-35310 ASCOT NO. MFG. NO. 426-35335 T335 LENGTH WEIGHT 1.5 lb. 12" ASCOT NO. MFG. NO. 429-35529 T11AH PROFESSIONAL DEAD BLOW HAMMERS 426-35332 ASCOT NO. MFG. NO. 426-35331 426-35332 426-35333 426-35334 426-35337 TG331 TG332 TG333 TG334 TG337 DESCRIPTION 1 lb. Head 2 lb. Head 3 lb. Head 4 lb. Head Steel Face/Soft Face 426-35337 LENGTH 12-1/4" 13-1/2" 14-1/2" 15-1/2" 13-1/2" WEIGHT 1.8 lb. 1.9 lb. 2.7 lb. 3.4 lb. 2.2 lb. ASCOT NO. MFG. NO. 429-35111 429-35113 429-35119 429-35127 429-35129 T11BH T11HN T11CH T11DH T11EH FOR HAMMER NO. T11B T11R, T31, T33R T11C, T34, T35, T36 T11D T11E LENGTH WEIGHT .75 lb. .75 lb. .75 lb. .75 lb. 1.2 lb. 15" 15" 17" 17" 30" FOR HAMMER NO. T11E, TG11E HICKORY REPLACEMENT HANDLES LENGTH WEIGHT 4.3 lb. 32" ALUMINUM REPLACEMENT HANDLES ASCOT NO. MFG. NO. 429-35206 429-35211 429-35219 429-35218 429-35832 TG31H TG11BH TG11CH TG11DH TG11EH FOR HAMMER NO. TG11R, TG31, TG33R TG11B TG11C, TG34, TG35,TG36 TG11D TG11E LENGTH WEIGHT 1 lb. 16" 16" 18" 18" 32" 1.3 lb. 2.5 lb. 1.2 lb. 2.3 lb. FIBERGLASS REPLACEMENT HANDLE FOR DUCK-BILLED BEAD BREAKING WEDGES • Handles are constructed with a solid core which has thousands of fiberglass strands and a unique resin making them super strong all-weather, chemical and insect-resistant • Ergonomic non-slip grips for slippery conditions • Replacement Adapters available • MADE IN THE USA MADE IN THE USA 429-35229 DESCRIPTION 32" Fiberglass Hammer Handle Replacement Handles WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

202 TIRE & WHEEL SERVICE R Wrenches & Lug Wrenches R KENTOOL PORKCHOP™ WRENCHES • Holds outer cap nut on dual wheels while turning inner nut • Lip fits in hole to secure wrench in place • Fits standard and metric cap nuts 406-30609 ASCOT NO. MFG. NO. 406-30609 406-30610 406-30612 TX9 TX10 TX12 DESCRIPTION SAE Metric Metric SIZE 1-1/2" 35mm 41mm WEIGHT .4 lb. .4 lb. .4 lb. HANDS FREE BUDD NUT WRENCHES COMBINATION CAP NUT WRENCHES • Combination wrench offers you the versatility of two wrenches in one • Fit one end onto the outer cap nut with other end through center hole • Slides underneath center disc of wheel reducing slipping during nut removals • Eliminates the need for hand and foot aid in separating the nuts, therefore reducing needless injury • Reduces the work and potential for back strain because there is no need to lay down the tire • Will not lose its grip on the outer cap nut so there is no loss of torque, which will give the impact wrench maximum power and efficiency The Budd Nut Wrench in use. WILL NOT LOSE ITS GRIP TWO WRENCHES IN ONE 406-30620 ASCOT NO. MFG. NO. 406-30620 TX50 DESCRIPTION SAE & Metric SIZE 41mm WEIGHT 1.3 lb. BUDD NUT WRENCHES HEAVY DUTY NUT WRENCHES • Heavy duty design will not slip out of position • Rests snugly against the center hole reducing the possibility of rim damage • Great for aluminum rims WILL NOT SLIP OUT OF POSITION 406-30618 ASCOT NO. MFG. NO. 406-30618 406-30619 TX200 TX241 DESCRIPTION SAE Metric SIZE 1-1/2" 41mm WEIGHT 2.6 lb. 2.6 lb. • New design won't slip out of rim hole • Will not damage aluminum/ chrome rim • Holds outer cap nut securely • This adaptation of an old product solves the problem of damage to wheels, as well as broken toes and injuries to the feet • Model 60301 has a replaceable polymer covered tail that locks the tool securely in place ASCOT NO. MFG. NO. 406-60300 60300 DESCRIPTION Budd Nut Wrench 406-60300 406-60 406-60303 ASCOT NO. MFG. NO. 406-60301 406-60302 406-60303 406-60908 60301 60302 60303 60908 DESCRIPTION Budd Nut Wrench Budd Nut Wrench - 35mm Budd Nut Wrench - 41mm Replaceable Polymer Tail SECURE HOLD BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 203 R HEAVY DUTY TRUCK WRENCHES • Use for off-the-road Budd-type wheels • Use TR11 handle 405-34401 ASCOT NO. MFG. NO. 405-34401 402-34402 TR10 TR11 LENGTH 29-1/2" 30" STOCK 1-3/4" Hex x 15/16" Square 1-1/4" WEIGHT 12.2 lb. 6.5 lb. DOUBLE END TRUCK WRENCHES • Double end truck wrenches for on-the-road service • Sizes available for all standard lug nuts • Constructed from 1" high quality steel for greatest strength and durability • All will take our standard TR5 (ASCOT Order No. 405-32318) leverage handle • HANDLE HEX OPENING: 3/4" • LENGTH: 16"; WEIGHT: 4-1/2 lb. FOR ONTHE-ROAD SERVICE 402-32508 POWER WRENCH • Designed for dual nut systems • Has 13/16" square end to hold inner nut, with a 1-1/2" hex drive to spin outer nut off FOR DUAL NUT SYSTEMS ASCOT NO. MFG. NO. 405-32501 405-32502 405-32504 405-32503 405-32505 405-32506 405-32509 405-32508 406-34547 405-32551 405-32552 405-32553 405-32556 405-32557 TR1 TR2 TR2X TR3 TR3A TR3X TR9 TR98 TRM1 TRM2 TRM3 TRM6 TRM7 SOCKET SIZE SAE 1-1/8", 13/16" Square, 1-1/2" 1, 1-1/4", 5/8" Square 15/16", 7/8" 7/8", 1-1/16" 1-1/8", 1-1/16" 1-1/16", 1-3/16" 1-1/4", 1-1/16" 1-1/2", 13/16" Square METRIC 35mm Sq. x 17mm Square 24mm x 33mm 27mm x 30mm 41mm x 21mm Square 33mm x 30mm Square 4.5 lb. 4.4 lb. 4.5 lb. 4.5 lb. 4.5 lb. 4.6 lb. 4.3 lb. 4.5 lb. 4.5 lb. 4.5 lb. 4.5 lb. 4.5 lb. 4.5 lb. WEIGHT DUAL WHEEL LUG STUD REMOVER • Special self-tapping splines provide maximum grip to remove stripped lug studs • Use with TR1 and TR98 truck wrenches • Also used with open end wrench • Use with soft-faced hammer SELFTAPPING SPLINES The Budd Wheel Set in use. ASCOT NO. MFG. NO. 404-34543 TR43 404-34545 404-34547 TR44X DESCRIPTION BASIC SET INCLUDES: Power Drive And Two Handles (Solid Bar - 201/2" Long And Tube - 20" Long) BUDD WHEEL SET INCLUDES: Power Drive, One Bar, One Tube Handle, A 3/4" Service Adapter And One 13/16" Square Adapter TR44SW UNIVERSAL SET INCLUDES: Power Drive, One 20-1/2" Bar, One 36" Tube Handle, A 3/4" Service Adapter, A 13/16" Square Adapter, And Six 3/4" Impact Sockets (7/8", 15/16", 1-1/16", 1-1/8", 1-3/16", 1-1/2") ASCOT NO. MFG. NO. 492-30165 30165 492-30165 DESCRIPTION Fits 13/16" Sq. Inner Nut WEIGHT 1 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE FRONT BACK

204 TIRE & WHEEL SERVICE Wrenches & Lug Wrenches (cont.) STOW & GO™ 4-WAY HD LUG WRENCH • The Stow & Go™ 4-Way HD Lug Wrench folds to save space in your trunk and locks into place for easy use • Push button in center allows wrench to fold after use • Sliding arms give extra leverage for removing lug nuts • Made of heavy duty and durable alloy steel • 17mm, 19mm, 21mm sockets, and 1/2" square drive adaptor to be used with other sockets • 16" in length FOLDS TO SAVE SPACE R LUG WRENCHES • Most popular 4-way lug wrench, polished sockets • Welded center construction for strength and durability • Premium grade bar quantity steel 403-35656 403-35636 ASCOT NO. MFG. NO. 403-35636 35636 DESCRIPTION Stow & Go™ 4-Way HD Lug Wrench 403-35659 HEAVY DUTY TRUCK FOUR-WAY LUG WRENCHES • Drop-forged center • APPLICATIONS: Heavy duty truck, bus, tractor fourway • Center hole for leverage bar • T96 with heavy duty solid center 403-35620 ASCOT NO. MFG. NO. 403-35595 403-35656 403-35657 403-35697 403-35659 ASCOT NO. MFG. NO. LENGTH STOCK 27-1/2" 1" 403-35595 403-35695 403-35696 403-35697 TC95 T95 27-1/2" 1" T96 27-1/2" 1" T95A 27-1/2" 1" 403-35795 TM95 27-1/2" 1" SOCKET SIZE 1-1/2", 13/16" Sq. 1-1/16", 1-1/4", 1-1/2", 13/16" Sq. 1-1/4", 1-1/2", 13/16" Sq., 3/4" Service Arm (will take any standard 3/4" drive socket) 24, 27, 30, 33mm 13.5 lb. 13.5 lb. 403-35661 13.5 lb. 403-35662 403-35663 T62 T63 18" 18" 9/16" 9/16" T61 22" 9/16" WEIGHT 1-1/2", 13/16" Sq., 30, 33mm 14.2 lb. 1-1/16", 1-1/4", 13.8 lb. 403-35620 T9520 20" 405-35690 T59 T90 22" 25" STANDARD 5/8" 3/4" ECONOMY 9/16" T56 T57 LENGTH STOCK PROFESSIONAL 5/8" 5/8" 20" 23" SOCKET SIZE 17, 19, 21, 22mm 3/4", 13/16", 7/8", 15/16" 3/4", 13/16", 7/8", 15/16" 7/8", 15/16", 1", 1-1/16" 3/4", 13/16", 7/8", 17mm 3/4", 13/16", 7/8", 17mm 3/4", 13/16", 7/8", 17mm WEIGHT 4 lb. 4-1/2 lb. 4.5 lb. 7.2 lb. 3.4 lb. 3.8 lb. 3.2 lb. 17, 19, 21, 22mm 3.2 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 205 R Shop Service Tools WHEEL COVER PULLERS/REPLACERS • Remove wheel covers quickly and easily without gouging or scratching • Rubber head T11RH prevents damage to hubcab and is replaceable SMALL TIRE SNAKE • Included with T600 Tire Changer 402-34672 ASCOT NO. MFG. NO. LENGTH STOCK WEIGHT 402-34672 34672 22" 5/8" 2 lb. MEDIUM TIRE SNAKE • Included with T601 Tire Changer • APPLICATIONS: Designed for wheels from 4" to 13" • Longer length provides greater strength 402-34674 ASCOT NO. MFG. NO. LENGTH STOCK WEIGHT 402-34674 34674 28" 5/8" 2.5 lb. R 40 LARGE TIRE SNAKE • Included with T600 Tire Changer 402-34678 ASCOT NO. MFG. NO. LENGTH STOCK WEIGHT 402-34678 34678 402-31567 ASCOT NO. MFG. NO. 402-31567 402-31568 T67 T68 LENGTH 17-1/2" 14" CENTER CAP REMOVERS R STOCK 9/16" 7/16" WEIGHT 1.8 lb. 1.3 lb. SHARK FIN DUAL WHEEL SEPARATION BAG 402-31565 • The first wheel separation solution for steel, aluminum and chrome wheels • No metal on metal contact • 5000 lb. of static pressing force • Works on 15" to 24.5" dual and single wheels and tires on trucks & trailers • Kevlar inner inflation bag is industrial grade and nearly puncture proof • SMALL BUT MIGHTY: Portable, durable, and fas • Full inflation only takes a matter of seconds • 3-foot inflation hose mak access easy and safe • Deflation is controlled with a quick turn of the slotted valve cap • 9.75" x 8" x 3/8" height deflated, 5.5" height when fully inflated • 90 psi max pushing pressure, 150 psi maximum rated pressure 402-31566 NO METAL ON METAL CONTACT 40" 3/4" 5.3 lb. ASCOT NO. MFG. NO. 402-31565 402-31566 T65 T66 LENGTH 7-3/4" 7-3/4" STOCK 5/16" 5/16" WEIGHT .2 lb. .2 lb. ASCOT NO. MFG. NO. 429-36455 364555 DESCRIPTION Shark Fin™ Dual Wheel Separation Bag WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

206 TIRE & WHEEL SERVICE DUAL WHEEL SEPARATOR • Makes removing stuck or frozen dual steel wheels quick and easy • Ideal for use on nearly any truck, bus, van or trailer with dual steel wheels • Innovative “one-piece” pusher won’t fall apart during use • Forcing screw and pullers have powerful 1-1/8" diameter x 7 threads for years of reliable service • Pusher is ball bearing-driven for near-zero turning resistance • Pusher is heat treated for long-lasting strength and durability • Includes two pullers to cover large truck, trailer and smaller light truck dual wheel applications • Use with air or electric impact wrench • Blow molded case BENCH MOUNT RIM-CLAMP MANUAL TIRE CHANGER • APPLICATIONS: Mounts and demounts a full range of tires on rim diameters from 4" to 12" • Mounts easily to a bench or in any standard, four-position rim-clamp tire changer • Built-in, three-fin centering device mounts standard lug-t • Square base prevents turning in the changer during use • Includes a 22" tire snake mount/demoun R 441-38600 SMALL TIRE SNAKE included 422-94549 T NO. MFG. NO. 38600 T600 HEIGHT WEIGHT 21.7 lb. 16.5" ASCOT NO. MFG. NO. DESCRIPTION R 422-94549 ASC94549 Dual Wheel Separator FLOOR MOUNT MANUAL TIRE CHANGER R DUAL WHEEL SEPARATOR • Makes removing stuck or frozen dual steel wheels quick and easy • APPLICATIONS: Ideal for use on nearly any truck, bus, van or trailer that has dual steel wheels • WEIGHT: 6.5" x 9.5" x 2.5", 5.3 lb. • MADE IN USA • APPLICATIONS: Mounts and demounts a full range of tires on rim diameters from 4" to 15" • Tapered bearing guide positively centers straight shaft hubs of all diameters • Built-in adjustable bead breaker works on rims up to 13" in diameters and 24" in width without disassembly • Includes a 28" tire snake mount/demount tool (Ascot # 402-34674) 441-38601 MADE IN THE USA 422-34549 ASCOT NO. MFG. NO. 422-34549 34549 DESCRIPTION Dual Wheel Separator ASCOT NO. MFG. NO. 441-38601 T601 HEIGHT WEIGHT 31 lb. BUILT-IN BEAD BREAKER 32" BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 207 Shop Service Tools (cont.) TRUCK WHEEL & RIM REMOVAL TOOL • The easiest & quickest way to loosen stubborn, locked up rims • Retire tha breaking 20 lb sledge tha you use to break seiz apart • Eliminate damaged tire side walls and rims • Fits all standard (22.5 and 2 semi truck rims; aluminum or steel • Safe and efficien MANUAL TIRE CHANGING SYSTEM • APPLICATIONS: For changing small tires and wheels • INCLUDES: Everything needed to change 4" to 16.5" tires including rim • Rim clamp mechanism • 2 center posts (for open or hub type wheels and bearing type wheels) • Also includes the CH-4 Mongoose tire tool • Can be mounted on a bench, tire stand or tire changer 422-71650 ASCOT NO. MFG. NO. 441-00220 441-00230 CH-22 CH-23 ASCOT NO. MFG. NO. 422-71650 71650 422-71655 71655 DESCRIPTION RIMWIT - Truck Wheel & Rim Removal Tool - Fits Standard 22.5 & 24.5 Wheels RIMWIT JR- Truck Wheel & Rim Removal Tool - Fits 19.5" Wheels HEIGHT Manual Tire Changer Tire Changing Stand 441-00220 The CH-22 Manual Tire Changer & CH-23 Tire Changing Stand shown with Floor Plate. MANUAL TIRE CHANGER & OPTIONAL BASE PLATE • Small tire changing system for lawn & garden, ATV and other small tires/wheels • Not for passenger tires • Adjustable to accomodate multiple tire/wheel sizes • High quality, energy saving & environmentally friendly • Portable and equipped with professional accessories • Can be operated easily without the use of power or pneumatic supplies • Works for an impressive range of tires • Great for family and commercial garages, racing teams, emergencies and any time a convenient changer is required ASCOT NO. 441-00202 441-00002 MFG. NO. BJ-CO2 BJ-CO2-BASEPLATE DESCRIPTION Manual Tire Changer Optional Base Plate for Manual Tire Changer 441-00202 Shown with Optional Base Plate (44100002) WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

208 TIRE & WHEEL SERVICE Automatic Tire Inflation Systems All systems feature an operating range of 5-145 PSI, accurate within 0.3 PSI. Units are housed in weather resistant aluminum casings. All provide an easy to use and affordable way to assure precise inflation. Units available with 110 volt AC electric or battery hook up. Optional heater available for outdoor units. Custom faceplates with corporate logo and color available. Can be hardwired and mounted to mobile service trucks. Systems confirm calibration every six minutes when in use and everytime they are powered on. INTERNATIONAL PROTECTION RATING: IP66, provides complete weather protection (except submersions). Automatically inflates or deflates to target PSI when attached to tire position. All systems can be programmed to specific PSI parameters to help organizations better manage consistent and accurate tire inflation. Wirelessly recieves/transmits gauged and corrected pressure via Bluetooth, Zigbee, or hardwired to PC. Designed to be operated with specific Haltec air chucks. NITROGEN COMPATIBLE: PSI is PSI, accuracy is main goal. All systems allow technician remote control of inflation/deflation process, keeping themselves out of "blast zone" of tire. SINGLE TIRE INFLATOR • Ideal for vehicle service centers, automobile dealerships and rental facilities • 1/4" inlet/outlet • OPERATING RANGE: 5-145 PSI HIGH VOLUME TIRE INFLATOR • For Fleet Operations, Service Centers, or Mounters • APPLICATIONS: For 19.5" and larger rims • Capable of inflating four 22.5" tires from 5 to 100 PSI in 5 minutes ASCOT NO. MFG. NO. 475-89001 89XDA DESCRIPTION Single Tire Inflation System 475-89001 ASCOT NO. MFG. NO. DESCRIPTION 475-89003 89XDB 475-89003 High Volume Tire Inflator SINGLE TIRE INFLATION HOSES & ACCESSORIES OVER INFLATION & HIGH VOLUME INFLATION SYSTEM 475-01898 478-00820 • For Retreaders, Fleets or Mounters • Inflate single or multiple tires to a preset over-pressure setting • Unit then performs a leak test for “zipper leaks” • Deflates to final preset required PSI setting • Features 3 preset PSI settings 475-89004 Over Inflation Settings ASCOT NO. MFG. NO. 475-00896 475-01892 475-01893 475-01894 475-01895 475-01896 475-01897 475-01898 478-00820 IN20 DESCRIPTION SVL-STD 89HKC-L 89HKC-LC 89HKT-L 89HK1-25 4' Mounting Steel Swivel Stand Straight Hose w/Coupler & CH3600P Chuck Coil Hose w/ Coupler and CH-360OP Chuck Straight Hose w/Coupler & CH 330-LO-OP Chuck Straight Hose w/Coupler & IN-20 Tool 89-2 WASV 2 Way Automatic Switching Valve (2 Hoses) 89-3 WASV 3 Way Automatic Switching Valve (3 Hoses) 89-3 WTK 3 Way Automatic Switching Valve Kit Core Removal and Inflation Tire Chuck Specify Hose length when ordering. Components available separately. 3 PRESET PSI SETTINGS INFLATE SINGLE OR MULTIPLE TIRES 3 Programmable PSI Presets ASCOT NO. MFG. NO. DESCRIPTION 475-89004 Remote Start 89 XDZ Over Inflation & High Volume System Emergency Deflation Target PSI BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 209 Automatic Tire Inflation Systems (cont.) MULTIPLE TIRE INFLATION HOSES & ACCESSORIES 478-00360 478-00891 478-00892 478-00895 478-00894 478-03300 ASCOT NO. MFG. NO. 478-00360 475-00891 475-00892 475-00893 475-00894 475-00895 475-00896 478-03300 SVL-STD DESCRIPTION CH-360S Chip-On Style Air Chuck (Closed) w/Spring 89HKC-LM Straight Hose w/ CH-360S Air Chuck 89HKT-LM 89HKI-25 89-HMVN 89-3W Air Flow Control Valve 4' Mounting Steel Swivel Stand CH-330-LO Lock-On Style Air Chuck (Dual Wheels) 4-WAY INFLATOR ACCESSORY BLOCK MULTIPLE TIRE INFLATION SYSTEM (3-WAY) • Inflates up to three wheels simultaneously at a 5-145 PSI pressure • Semi-pneumatic locking swivel wheel • Colorcoded 0.25" inflation hose • 1/2" and 3/8" inlet/outlet • Suitable for use with standard or large bore valves and core extraction tools • Inlet pressure gauge • Dual LCD screens indicate gauged and targeted pressure 475-89103 ASCOT NO. MFG. NO. 475-89103 DESCRIPTION 89MTIS-3DS Multiple Tire Inflation System (3-Way) ASCOT NO. DESCRIPTION 477-11624 •Lightweight aluminum manifold splits air lines into (4) separate lines • Slide valve turns air on/off to start inflation • (4) ¼” universal quick couplers allow for any type fitting • 3’ whip hose Straight Hose w/Coupler & CH-330-LO Air Chuck Straight Hose w/Coupler & IN-20 Tool (Single Tire) 4-Way Manifold ASCOT NO. MFG. NO. 477-11623 DESCRIPTION 11.0623NA 4-Way Inflator Kit 477-11624 4-Way Inflator Accessory Block WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

210 TIRE & WHEEL SERVICE Safety Inflation Cages A safety inflation cage is mandatory in any shop for tubeless and multi-piece rims. Ascot offers a size and design for all your needs. Constructed of heavy gauge steel welded to a steel base. Guards against blown lock rings, exploding rims and ruptured tire explosions when used properly. These cages meet OSHA safety requirements (29-CFR Part 1910.177). 2-BAR 3-BAR BRANICK SAFETY INFLATION CAGES • Constructed of heavy gauge steel welded to a steel base • No-mar wheel protection available • Multiple sizes for passenger and commercial locations • Side mesh option provides complete protection • Arch design for maximum energy displacement • These cages meet OSHA safety requirements (29-CFR Part 1910.177) 4-BAR 479-02220 6-BAR 479-02130 HEAVY GAUGE STEEL MULTIPLE SIZES AND DESIGNS 479-02240 479-02260 ASCOT NO. 479-02220 479-02130 479-02240 479-02260 MFG. NO. 2220 2130 2240 2260 ! CAUTION BUYER'S GUIDE DESCRIPTION Portable 2-Bar Safety Cage 3-Bar Passenger/Light Truck Cage 4-Bar Safety Cage with No Mar Coating 6-Bar Safety Cage MAX. HEIGHT X MAX. TIRE WIDTH 2-BAR SAFETY INFLATION CAGES 54" x 21.5" 3-BAR SAFETY INFLATION CAGES 34" x 21.5" 4-BAR SAFETY INFLATION CAGES 54" x 21.5" 6-BAR SAFETY INFLATION CAGES 59" x 29" Work safely. Always use an inflation cage when inflating tires. Follow OSHA regulation 29-CFR Part 1910.177 whenever changing tires. 35" W x 41" D x 62" H 385 lb. 28" W x 28" D x 60" H 170 lb. 28" W x 20" D x 40" H 120 lb. 28" W x 17" D x 60" H 76 lb. DIMENSIONS WEIGHT ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 211 2-BAR 3-BAR MARTINS SUPPLY SAFETY INFLATION CAGES • A safety inflation cage is mandatory in any shop for tubeless and multi-piece rims and Ascot offers a size and design for all your needs • Constructed of heavy gauge steel welded to a steel base • Guards against blown lock rings, exploding rims and ruptured tire explosions when used properly • These cages meet OSHA safety requirements (29-CFR Part 1910.177) HEAVY GAUGE STEEL 479-36006 4-BAR VARIOUS SIZES AND DESIGNS 5-BAR 479-36013 479-36002 9-36005 ASCOT NO. MFG. NO. 479-36001 479-36011 479-36201 479-36211 479-36006 479-36013 479-36002 479-36005 479-36015 MIC-2 MIC-2WB MIC-2G MIC-2WBG MIC-3 MIC-PCR MIC-4 MIC-5 MIC-OTR ! CAUTION SUPPLY CORPORATION DESCRIPTION 2-BAR SAFETY INFLATION CAGES Portable 2-Bar Safety Cage Portable 2-Bar Safety Cage (Super Single) Galvanized Portable 2-Bar Safety Cage Galvanized Portable 2-Bar Safety Cage (Super Single) 3-Bar Safety Cage 3-Bar Passenger-SUV Safety Cage 4-Bar Safety Cage 5-Bar Safety Cage OTR 5-Bar Safety Cage Up to 48” OD X 13” W Up to 48” OD X 21” W Up to 48” OD X 13” W Up to 48” OD X 21” W 3-BAR SAFETY INFLATION CAGES Up to 47” OD X 19” W Up to 35” OD X 12.5” W 4-BAR SAFETY INFLATION CAGES Up to 47” OD X 19” W 5-BAR SAFETY INFLATION CAGES Up to 47” OD X 19” W Up to 62” OD X 33” W Work safely. Always use an inflation cage when inflating tires. Follow OSHA regulation 29-CFR Part 1910.177 whenever changing tires. 41” x 26-1/4” x 57-5/16” 41” x 39-3/8” x 66” 182 lb. 277 lb. 31-5/8” x 26-1/4” x 57-5/16” 147 lb. 22-1/4” x 26-1/4” x 57-5/16” 21” x 28” x 40” 108 lb. 93 lb. 21-1/2” x 16-3/4” x 51” 29” x 16-3/4” x 52” 21-1/2” x 16-3/4” x 51” 29” x 16-3/4” x 52” 69 lb. 78 lb. 69 lb. 78 lb. HANDLES TIRES 479-36015 DIMENSIONS WEIGHT WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

212 TIRE & WHEEL SERVICE 2-BAR R 3-BAR KEN-TOOL® SAFETY INFLATION CAGES • Constructed of heavy gauge steel welded to a steel base • Guards against blown lock rings, exploding rims and ruptured tire explosions when used properly • These cages meet OSHA safety requirements (29-CFR Part 1910.177) 479-46001 479-46011 4-BAR 479-46006 479-36003 479-36004 5-BAR 479-46002 9-46010 ASCOT NO. 479-46001 479-46011 479-36003 479-36004 479-46006 479-46002 479-46005 479-46010 MFG. NO. DESCRIPTION 36001 36007 T103 T104 36006 36002 36005 36010 2-Bar Safety Cage 2-Bar Wide Base Safety Cage 3-Bar Safety Cage/Light Truck Cage 3-Bar Safety Cage for Off Road 3-Bar Tire Inflation Cage 4-Bar Safety Cage 5-Bar Safety Cage 5-Bar Super Magnum ! CAUTION BUYER'S GUIDE HANDLES TIRES BASE PLATE INSIDE HEIGHT 2-BAR SAFETY INFLATION CAGES — — 7" x 21-1/2" 7" x 27" 3-BAR SAFETY INFLATION CAGES — — — 21-1/2" x 22" 30" x 27" 31.5" x 26" 4-BAR SAFETY INFLATION CAGES — 5-BAR SAFETY INFLATION CAGES — — 31.5" x 26" 41" x 26" 48" x 30" Work safely. Always use an inflation cage when inflating tires. Follow OSHA regulation 29-CFR Part 1910.177 whenever changing tires. 41" 43.5" 30" 65" 43.5" 43.5" 43.5" 41.5" INSIDE DIMENSIONS 41" H x 16" W WEIGHT 60 lb. 43.5" H x 20.5" W 72 lb. 30" H x 16" W 65" H x 24" W 80 lb. 158 lb. 43.5" H x 20.5" W 146 lb. 43.5 H x 20.5 W 146 lb. 43.5" H x 20.5" W 182 lb. 41.5" H x 24" W 248 lb. ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE & WHEEL SERVICE

TIRE & WHEEL SERVICE 213 Safety Inflation Cages (cont.) R TRUCK TIRE CHANGING STAND • APPLICATIONS: Handles wheels or open rims 16.5" to 24" • Double-slide adjustment with locking device prevents twisting so it stays aligned with the wheel or rim • Ideal height for driving off beads or demounting tire 479-36115 ROLLER FOR TIRE INFLATION CAGES • Used to roll the tires easily directly into the inflation cage • Allows an easy access to the tire valve because it is easy to turn the tire to have the valve to any position • For use with all 3-bar, 4-bar & 5-bar inflation cages • Prevent back injuries when handling heavy tires • WEIGHT: 12 lbs. ASCOT NO. MFG. NO 479-36115 T115 ALLOWS FOR EASY ACCESS TO TIRE VALVE Truck Tire Changing Stand EZ TIRE ROTATOR FOR INFLATION CAGES • APPLICATIONS: EZ Tire Rotator fits any Ken-Tool 3-Bar, 4-Bar and 5-Bar Inflation Cage, plus many competitive cages • No need to lift or remove rim/wheel assembly from cage when repositioning valve stem for access through the cage tubes • Allows tire tech to easily and quickly rotate rim/wheel assembly inside the safety cage in order to adjust position of valve stem • Reduces handling, back strain and user fatigue; increases safety • Easily installed or moved to another cage - no fastening required • No assembly required; simply place in the center of the cage • Features heavy-duty 2" ball-bearing steel rollers and ¼" thick steel stock for long service • Boxed and UPS shippable • MADE IN USA ASCOT NO. MFG. NO. 479-36111 DESCRIPTION MIC-ROLLER Roller for Tire Inflation Cages 479-36111 TIRE CAGE STAND FOR AUTOMATIC INFLATORS • Used to support automatic inflators to tire inflation cages • Reduces movement and allows for faster inflation of tires • Install directly on the top of one of the inflation cage bars with the mounting bracket • WEIGHT: 8 lbs. NO ASSEMBLY REQUIRED ALLOWS FOR FASTER INFLATION OF TIRES MADE IN THE 479-36112 USA ASCOT NO. MFG. NO. 479-36014 T114 DESCRIPTION EZ Tire Rotator for Inflation Cages 479-36014 ASCOT NO. MFG. NO. 479-36112 DESCRIPTION MW-STAND Tire Cage Stand for Automatic Inflators WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE & WHEEL SERVICE

Between Profits and Efficiency The Perfect Balance Between Profits and Efficiency THE ORIGINAL AND THE BEST Put Safety Into Motion by

215 TPMS Tools & Sensors TPMS Accessories & Kits TPMS Tools TPMS Transmitters Aftermarket Accessory Kits Tire Valves Truck & Specialty Valves Valve Caps, Cores & Extensions Special Application Products Large Bore Extensions Valve Hardware Tools Tire Gauges Inflator Gauges WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

218 VALVE HARDWARE AUTEL MAXITPMS ITS600 SERVICE TOOL • New tablet style TPMS tool • Optical scanner identifies VIN/MMY • Exclusive TPMS status screen • Fast OBD II relearn for most US domestic vehicles • Copy by OBD sensor programming for faster service • Batch program up to 20 Autel 1-Sensors • Activate, read, relearn all known TPMS sensors • Wireless OBDII connection via Bluetooth VCI • Tire pressure placard value reset • Read/clear codes & view all system live data (with Pro Upgrade) • Includes 4 commonly used maintenance service • FREE Wi-Fi software updates for the life of the tool • 5.5” Touchscreen (1280 x 720) / Android 9.0 / 8MP camera • On-Tool Tire Expiration Notice / Tire Recall Lookup / Scan DOT 469-60012 Tool Only 469-60024 469-60024 469-60000 ASCOT NO. MFG. NO. 469-60000 469-60012 469-60024 DESCRIPTION ITS600 ITS600K12 ITS600K24 Autel ITS600 MaxiTPMS Diagnostic Tool Autel ITS600K12 MaxiTPMS Tool & (12) 1-Sensors Autel ITS600K24 MaxiTPMS Tool & (24) 1-Sensors BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE 12 MX-SENSORS 24 MX-SENSORS

VALVE HARDWARE 219 AUTEL TBE200 TREAD DEPTH MEASUREMENT TOOL • 1.65” AMOLED super retina touchscreen • 1 Megapixel Macro Camera, 8 Megapixel Zoom Camera • Tire Tread Depth/ Brake Disc Wear Measurement • No Need To Remove The Wheel During Measurement • Laser Measurement with 0.1mm Accuracy • Real-Time Measurement Data on Touchscreen • Full Tread Measurement / Quick Check • Measurement Data Curve Display/ Uneven Wear Analysis • Detailed Replacement & Maintenance Suggestions • Test Detail For Single Tire Tread / Brake Disc • Tire Expiration Notice / Tire Recall Lookup / Scan DOT (COMING SOON) • Take Photos of Tire Wear & Damage • Calibration Plate Included • Compatible with Autel ITS600 • Tire Health Report QR Code for easy sharing TBE200 INTELLIGENT LASER MEASUREMENTS TIRE TREAD DEPTH MEASUREMENT BRAKE DISC WEAR MEASUREMENT 0.1MM LASER ACCURACY TOUCHSCREEN DISPLAY > ASCOT NO. 454-00200 MFG. NO. TBE200 DESCRIPTION Autel TBE200 MaxiTPMS Tread Depth Measurement Tool WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE COMPATIBLE WITH AUTEL ITS600

220 VALVE HARDWARE AUTEL ADVANCED TPMS SERVICE TOOL + (12) 1-SENSORS • The MaxiTPMS® TS508 is a new generation TPMS diagnostic & service tool specially designed to activate all known TPMS sensors, read TPMS sensor status, check TPMS system health condition, program MX-sensors and conduct TPMS relearn • With Quick Mode and Advanced Mode options, you can save time and energy by choosing the most suitable way to complete TPMS work AUTEL TPMS TOOL/SENSOR KIT CONTAINS: • TS508 TPMS Tool • 12 MX-Sensors w/ Rubber Stems • 4 Metal Valve Stems • OBDII Cord • Charging Cord • Magnet • User Manual • Blow Molded Case Simplified interface. At-a-Glance TPMS Status Screen. ASCOT NO. MFG. NO. 469-50812 DESCRIPTION TS508K-12 Autel TPMS Tool/Sensor Kit AUTEL MAXI TPMS WIFI TOOL & (16) 1-SENSORS • 4 programming methods • Free updates for the life of the tool • Exclusive TPMS status screen • Change placard value (domestics) • OBD relearn on domestics • Exclusive copy by OBD • Update via WI-FI AUTEL TPMS TOOL/SENSOR KIT CONTAINS: • TS508 TPMS Tool • 16 MX-Sensors w/ Rubber Stems • 4 Metal Valve Stems • OBDII Cord ASCOT NO. MFG. NO. 469-50816 TS508WFK-16 • Charging Cord • Magnet • User Manual • Blow Molded Case DESCRIPTION Maxi TPMS WIFI Tool & 16 MX-Sensor Kit WIFI CAPABILITIES 469-50816 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE 12 MX-SENSORS 16 MX-SENSORS

VALVE HARDWARE 221 MAXI TS608 TPMS/DIAGNOSTIC TOOL & (12) 1-SENSORS • Activate all known TPMS sensors and read sensor status • Diagnose ECU for complete TPMS health check with DTC description • Read DTCs from ECU and erase DTCs • Program MX-Sensors by copying original sensor IDs or creating new IDs randomly • On-tool relearn procedure and wide OBD relearn coverage • Equipped with a 7-inch touch screen with 1024 * 600P resolution and a VCI mini for wireless communication with the test vehicle AUTEL TPMS TOOL/SENSOR KIT CONTAINS: • TS608 TPMS Tool • 12 MX-Sensors w/ Rubber Stems ASCOT NO. MFG. NO. 469-60812 DESCRIPTION TS608K-12 Autel Maxi TPMS Diagnostic Tool • Charging Cord • User Manual • Blow Molded Case AUTEL MAXI TPMS DIAGNOSTIC TOOL • Activate all known TPMS sensors and read sensor status • Diagnose ECU for complete TPMS health check with DTC description • Read DTCs from ECU and erase DTCs • On-tool relearn procedure and wide OBD relearn coverage • Program MX-Sensors by copying original sensor IDs or creating new IDs randomly • Equipped with a 7-inch touch screen with 1024*600P resolution and a VCI mini for wireless communication with the test vehicle ASCOT NO. MFG. NO. 469-00608 TS608 DESCRIPTION Autel Maxi TPMS Diagnostic Tool 469-00608 Advanced Service Features. 469-06464 AUTEL WIRELESS OBDII CONNECTOR ASCOT NO. MFG. NO. DESCRIPTION 469-06464 VCI Mini Autel Wireless OBDII Connector WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE 12 MX-SENSO

222 VALVE HARDWARE 461-20326 AUTEL MX-SENSOR PROGRAMMABLE UNIVERSAL TPMS SINGLE SENSORS • Combines 315MHz & 433MHz frequencies into a single sensor • 99% vehicle coverage • The exclusive MX-Sensor patented PRESS release valve allows rubber and metal valve stems to freely interchange by hand without requiring a tool • Built to match or exceed OEM sensors in frequency strength and durability • 100% ID clone-able with no relearn required • Quickly update during installation with an Autel wireless programming tool ASCOT NO. MFG. NO. 461-20326 461-20327 461-20328 461-20329 461-20330 461-20331 DESCRIPTION 1-Sensor 1-Sensor-M 1-Sensor-240 1-Sensor-24 1-Sensor-M-240 1-Sensor-M-480 Autel MX-Sensor Programmable Universal TPMS Single Sensor - Rubber Autel MX-Sensor Programmable Universal TPMS Sensor - Metal Autel MX-Sensor w/ Rubber Valve - 240 Bulk Pk. Autel MX-Sensor w/ Rubber Valve - 24 Bulk Pk. Autel MX-Sensor w/ Metal Valve - 240 Bulk Pk. Autel MX-Sensor w/ Rubber Valve - 480 Bulk Pk. AUTEL MX-SENSOR REPLACEMENT VALVES • Patented PRESS release valve design • No valve tools required • Simply click in and press out • Cap and core included • Available in rubber or metal stems ASCOT NO. MFG. NO. 469-20280 469-20279 469-20281 469-20282 469-20283 RV1000 MV1000 CV-001 CV-002 CV-003 DESCRIPTION RUBBER Autel MX-Sensor Replacement Rubber Valve METAL Autel MX-Sensor Replacement Metal Valve Autel Black MX-Sensor Replacement Metal Valve 469-202 Autel Titanium Grey MX-Sensor Replacement Metal Valve MX-Sensor Chrome Replacement TPMS Valve 469-20283 AUTEL TIRE PRESSURE PLACARD VALUE STICKER • Never set tire pressure below OE Specs • Always use equal to or greater than load rating on replacement tire to determine proper air pressure for placard • Always complete and install a new tire placard properly marked • Place new tire placard next to OE tire placard • Quantity: 100 per roll ASCOT NO. MFG. NO. 469-20284 PVS01 DESCRIPTION Autel Tire Pressure Placard Value Sticker (100 per Roll) 469-20284 469-20280 Autel MX-Sensor 240 Bulk Pk. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 223 SCHRADER EZ-SENSOR®/TOOL BUNDLE • Programs EZ-sensor® and other programmable TPMS sensors • Reads, activates & relearns all known TPMS sensors in the market • Clears, retrieves and decodes TPMS Diagnostic Trouble Code (DTC) information • Offers quick & convenient software updates through WIFI • Comes with 5 years of software updates SCHRADER EZ-SENSOR® GO THE MARKET'S FASTEST PROGRAMMABLE TPMS SENSOR! 1-3 SECOND SENSOR PROGRAMMING FOR A MAJORITY OF DOMESTIC VEHICLES. INCLUDES THE SAME GREAT BENEFITS AND FUNCTIONALITY OF THE EZ-SENSOR® • 1 SKU • Combines 314.9, 315 & 433 MHZ • PROGRAMMABLE: Compatible with most tools on the market you may already own • Rubber Snap-In Stem • OE QUALITY: From the OE Supplier TOUCHSCREEN 461-33560 NEW & IMPROVED TOOL Schrader S57 Tool Includes EZ100 -sensors® ASCOT NO. MFG. NO. 469-21057 DESCRIPTION 21057-S57EZGO100 Schrader EZ-sensor®/Tool Bundle ASCOT NO. MFG. NO. 461-33560 461-33561 461-33562 33560 33560M 33560-24 Schrader EZ-sensor® GO TPMS Sensor Schrader EZ-sensor® GO - 220 Bulk Pk. Schrader EZ-sensor® GO - 24 Bulk Pk. DESCRIPTION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

224 VALVE HARDWARE TECH600PRO • High Resolution Color Display • Graphical User Interface • Wireless Vehicle Connection Interface • Long Lasting, Rechargeable Battery • Improved LF Signal and UHF Detection • Faster Tool Response and Operation • 2 Year Warranty / 2 Year’s Software 469-40600 ASCOT NO. MFG. NO. 469-40450 ASCOT NO. MFG. NO. 469-40600 DESCRIPTION WRT600PRO Tech600PRO TPMS Tool Kit - INCLUDES Tech600Pro, Wireless VCI, Power Supply, USB Cable, Quick Start Guide, Black Soft Case, 2 Year Tool Warranty, 2 Year Tool Software 469-40630 WRT600PRORS30P Tech600PRO RITE-SENSOR Bundle Kit - INCLUDES Tech600Pro, Wireless VCI, Power Supply, USB Cable, Quick Start Guide, 30 Rubber Stem Rite-Sensors, 2 Year Tool Warranty, 5 Year Tool Software DESCRIPTION WRT450PRO Tech450PRO TPMS Tool 469-40450 TECH450PRO • High Resolution Color Display • Advanced TPMS Technology for faster programming • Comprehensive OBD Relearn Coverage for Import & Domestic Vehicles • Long Lasting, Rechargeable Battery • Improved LF Signal and UHF Detection • Faster Tool Response and Operation • TPMS Placard Adjusting • Programs Many Aftermarket Sensors • Direct Wi-Fi Updating • Bluetooth Capable • 2 Year Warranty / 2 Year’s Software TECH RITE PRO • The TechRITEPro combines high powered functionality with incredible affordabilit • The “TRP” is an easy-to-use TPMS Diagnostic Tool, TPMS Relearn Tool, and Rite-Sensor® programming Tool • High Resolution Color Display • Long Lasting, Rechargeable Battery • Removable/Replaceable Battery • Improved LF Signal and UHF Detection • Faster Tool Response and Operation • Heavy Duty OBDII Cable/Connector • 2 Year Warranty / 2 Year’s Software ASCOT NO. MFG. NO. 469-40100 469-40110 469-40130 WRTTRP100 WRTTRP100-RS10P WRTTRP100-RS30P DESCRIPTION TechRite PRO TechRite PRO with 10 RITE-SENSORS TechRite PRO with 30 RITE-SENSORS BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE NEWEST TPMS INNOVATION!

VALVE HARDWARE 225 BARTEC SOFTWARE BUNDLES • Configures in less than 3 seconds • Programs & Updates in less than 10 seconds • Dual Frequency [315 MHz and 433 MHz] • 99%, Single SKU Application Coverage • Comes with Rubber Valve Stem • Programs with Bartec TPMS Tools • Programs in free space or assembled in the wheel • Programming process is directed by the tool • Complete offering including replacement valves and service kits • 1, 2 or 3-year electronic TPMS tool software updates • Tool updates annually adding features, functions & coverages ASCOT NO. MFG. NO. DESCRIPTION 469-46001 WRT600PROSULRS1E 469-46002 WRT600PROSULRS2E 469-46003 WRT600PROSULRS3E 469-45001 WRT500SULRS1E 469-45002 WRT500SULRS2E 469-45003 WRT500SULRS3E 469-45010 WRT450PROSULRS1E 469-45020 WRT450PROSULRS2E 469-45030 WRT450PROSULRS3E 469-44001 WRT400PROSULRS1E 469-44002 WRT400PROSULRS2E 469-44003 WRT400PROSULRS3E 469-43001 WRT300PROSULRS1E ASCOT NO. MFG. NO. 461-10010 461-10120 461-10020 461-10121 461-10011 461-10122 DESCRIPTION RS-1000-10 RS-1000-120 RS-1000-20B RS-1000-120B RS-1000-10R RS-1000-120R Rite-Sensor® Sleeve of 10 Boxed Sensors, Rubber & Aluminum Stem (Red Box) Rite-Sensor® Case Pack of 120, Rubber & Aluminum Stem Rite-Sensor® Bulk Pack of 20 Rubber Stem Rite-Sensor® Bulk Pack of 120, Rubber Stem Rite-Sensor® Sleeve of 10 Sensors, Rubber Stem (Grey Box) Rite-Sensor® Master Pack, 12 Sleeves of 10 Boxed Sensors (120 total), Rubber Stem (Grey Box) 469-43002 WRT300PROSULRS2E 469-43003 WRT300PROSULRS3E 469-44101 469-44102 469-44103 WRTTRPSULRS1E WRTTRPSULRS2E WRTTRPSULRS3E Electronic Tech600PRO one year software update license w/ 10 RITE-SENSORS Electronic Tech600PRO two-year software update license w/ 16 RITE-SENSORS Electronic Tech600PRO three-year software update license w/ 24 RITE-SENSORS Electronic Tech500 one year software update license w/ 10 RITE-SENSORS Electronic Tech500 two-year software update license w/ 16 RITE-SENSORS Electronic Tech500 three-year software update license w/ 24 RITE-SENSORS Electronic Tech450PRO one year software update license w/ 10 RITE-SENSORS Electronic Tech450PRO two-year software update license w/ 16 RITE-SENSORS Electronic Tech450PRO three-year software update license w/ 24 RITE-SENSORS Electronic Tech400PRO one year software update license w/ 10 RITE-SENSORS Electronic Tech400PRO two-year software update license w/ 16 RITE-SENSORS Electronic Tech400PRO three-year software update license w/ 24 RITE-SENSORS Electronic Tech300PROC one year software update license w/ 8 RITE-SENSORS Electronic Tech300PROC two-year software update license w/ 14 RITE-SENSORS Electronic Tech300PROC threeyear software update license w/ 20 RITE-SENSORS Electronic TechRITEPRO one year software update license w/4 RITE-SENSORS Electronic TechRITEPRO two-year software update license w/8 RITE-SENSORS Electronic TechRITEPRO threeyear software update license w/12 RITE-SENSORS WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE Rubber & Aluminum Replacement Valves Available SERVICE KITS AVAILABLE!

226 VALVE HARDWARE TPMS CHECK BOX VT56 DIAGNOSTIC TPMS TOOL KIT • Identify differences between the tire filing gauge and the TPMS sensor readings • Designed for use with all styles of TPMS sensors • Test TPMS sensors for defects before mounting to the wheel ASCOT NO. MFG. NO. DESCRIPTION 469-03200 OCB TPMS Check Box 200 VT TRUCK • Ideal for fleet management and heavy vehicle maintenance • Manages and stores up to 22 wheels • Checks tire pressure to prevent under-inflation and reduce vehicle down time • Activates TPMS sensors of major truck and bus brands • Displays all sensor data: ID, tire pressure, tire temperature, battery status, etc. • Identifies the sensor by vehicle, by sensor reference or simply scan all protocols to activate • Provides easy access into the wheel arch and twin wheel configurations 469-05001 ASCOT NO. MFG. NO. 469-05001 DESCRIPTION VTTRUCK VT Truck Activation Tool for Trucks and Buses VT37 TPMS RESET, TRIGGER & PROGRAMMING TOOL As the successor to the VT36, the brand new VT37 is the ideal tool for DIYers, technicians and front counter workers. The tool is designed to activate, read and service all major OEM & aftermarket sensor brands, as well as perform vehicle specific TPMS relearn procedures. Constant Live Sensor and quarterly updates allow for the newest TPMS sensors to be added to the tool effortlessly. Whether it’s stored in a glove compartment or toolbox, the VT37 is the perfect partner for servicing TPMS. ASCOT NO. MFG. NO. 469-37100 VT37 VT37 TPMS Reset, Trigger & Programming Tool 469-37100 DESCRIPTION 469-56102 ASCOT NO. MFG. NO. 469-56100 DESCRIPTION TS56-1000 VT56 TPMS Diagnostic & Reset Master Kit. INCLUDES: VT56 TPMS Tool, OBDII module, docking station, printer, CD with manual and software, magnet, reference guide, USB cable and power supply TS56-1002 VT56 TPMS Tool OBDII Kit. INCLUDES: VT56 TPMS Tool, OBDII module, printer, CD with manual and software, magnet, reference guide, USB cable and power supply 469-56100 VT57 ALL-IN-ONE TPMS & TIRE MANAGEMENT TOOL Introducing the all-new VT57 with a brand-new touchscreen interface, 100% OEM sensor diagnostic coverage, 90% OBD coverage, tire tread depth capturing, "Sync-ID"OBD technology and much more. Constant Live Sensor updates and the ability to connect Wi-Fi to ensure that the VT57 has the latest coverage available. 469-57100 ASCOT NO. MFG. NO. 469-57100 VT57 DESCRIPTION VT57 All-In-One TPMS & Tire Management Tool BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 227 TPMS Accessories & Kits SCHRADER TPMS VALVE CAPS SCHRADER TPMS VALVE CORE • Electroless Nickel-Plated valve core • QUANTITY: Packaged 100 per box ASCOT NO. MFG. NO. 468-20055 468-20595 468-00050 BERU TPMS VALVE INSERTS 468-20495 468-20795 468-20995 • Original equipment valve insert for the HUF Tire Safety System • Each Insert comes complete with cap, core, grommet & grommet nut • Colored bottom to differentiate inserts • APPLICATIONS: Audi, Bentley, BMW, Ferrari, Land Rover, Maserati, Maybach, Mercedes-Benz, Porsche, Volkswagen • Requires TX-20EZ torx tool for assembly/disassembly 20055 DESCRIPTION Schrader TPMS Valve Core 468-20055 ORIGINAL 468-59019 ASCOT NO. MFG. NO. 468-00050 468-20495 468-20595 20395 20495 20595 468-20695 468-20795 468-20995 468-59019 468-59021 468-59023 20695 20795 20995 59-0019 59-0021 59-0023 DESCRIPTION Plastic Valve Caps Aluminum Valve Caps Black TPMS Plastic Sealing Valve Caps for Snap-In Transmitters Green TPMS Plastic Sealing Valve Caps for Snap-In Transmitters Green TPMS Plastic Sealing Valve Caps Black TPMS Plastic Sealing Valve Caps Green Nitrogen Indicating Aluminum Valve Cap Chrome-Plated Brass Valve Caps Universal Nitrogen Caps QTY./BOX 100 100 100 100 100 100 100 100 100 EQUIPMENT VALVE INSERT COLORED BOTTOMS 461-59307 461-59337 SCHRADER REPLACEMENT ALUMINUM VALVE STEMS ASCOT NO. MFG. NO. DESCRIPTION 469-34000 34000 469-25080 469-25078 469-25082 469-25083 25080 25078 25082 25083 Replacement Aluminum Valve Stem Aluminum Straight Stem for 90 Degree EZ-Sensor Aluminum Angled Stem for 90 Degree EZ-Sensor Black Straight Stem for 90 Degree EZ-Sensor Black Angled Stem for 90 Degree EZ-Sensor 469-34000 ASCOT NO. MFG. NO. 461-59307 461-59337 461-59357 461-59387 469-02020 59.0342 59.0340 59.0346 59.0344 TX-20EZ 461-59357 DESCRIPTION Green Insert Silver Insert Orange Insert Black Insert Torx Screwdriver 461-59387 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

228 VALVE HARDWARE TPMS Accessories & Kits (cont.) DILL TPMS VALVE CAPS & CORES • QUANTITY: Packaged 100 per box 468-01001 TPMS REPLACEMENT VALVES 468-00635 468-00650 468-06300 ASCOT NO. MFG. NO. DESCRIPTION 468-00635 468-00650 468-00680 468-00690 635 650 680 690 468-01001 468-06300 469-00650 100-TP 630N 650B Plastic Cap for VS-950 TPMS Snap-In Valve Small Plastic TPMS Valve Cap - Gray N2 Aluminum Cap for TPMS N2 Plastic Cap for TPMS Electroless Nickel Plated Valve Core Plastic TPMS Valve Cap - Gray Short Black Plastic TPMS Valve Cap 469-17395 ALLIGATOR TPMS SNAP-IN REPLACEMENT VALVE • Alligator's innovative anti-rotation feature with a rubber lip at the base to prevent the sensor and valve from spinning in the wheel • Maximum published speed rating of 130 MPH - Industry highest • Self-tapping T10 screw provides better torque and locks the valve to the sensor for a tighter, longer lasting fit • Made in Germany 469-17397 469-17245 469-17246 SELFTAPPING T10 SCREW TIGHTER, LONGER LASTING FIT 469-59132 469-17395 ASCOT NO. MFG. NO. 469-59132 591320 DESCRIPTION Alligator TPMS Snap-In Replacement Valve 469-17397 469-17539 17-50395 17-50397 17-50399 ASCOT NO. MFG. NO. 469-17245 469-17246 469-17539 DESCRIPTION 17-20045 17-20046 High-Speed TPMS Snap-In Valve Stem TPMS Snap-In Valve Stem (Right Angle Key) Snap-In Sensor Rubber Valve Stem (Square Key) Snap-In Sensor Rubber Valve Stem Hyundai TPMS Snap-In Valve BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 229 SHORT TPMS REPLACEMENT SNAP-IN VALVE STEM TPMS REPLACEMENT VALVES • Found on custom wheel applications • Addresses clearance issues with inside valve holes • MAXIMUM COLD INFLATION PRESSURE: 65 PSI • Parallel key ADDRESSES CLEARANCE ISSUES 469-17218 469-17398 ASCOT NO. MFG. NO. 469-17398 DESCRIPTION 17-50398 Short TPMS Replacement Snap-In Valve Stem 469-17395 .625" VALVE HOLE TPMS REPLACEMENT VALVES • Found on Ford Super Duty Trucks and Sprinter Vans • MAXIMUM COLD INFLATION PRESSURE: 150 PSI • Attachment screw and valve cap included 469-17397 FOR .625" VALVE HOLES 469-17590 469-17591 469-17596 469-17392 469-17393 ASCOT NO. MFG. NO. 469-17218 469-17395 469-17397 ASCOT NO. MFG. NO. 469-17392 469-17393 DESCRIPTION 17-50392 TPMS Replacement Valve for .625" Valve Hole (Parallel Key) 17-50393 TPMS Replacement Valve for .625" Valve Hole (Square Key) 469-17590 469-17591 469-17596 17-20018 17-50395 17-50397 Continental Snap-In Rubber TPMS Valve Stem 17-50390 Metal TPMS Valve Stem for Ford 17-50391 TPMS Metal Clamp-In Valve for TRW Screw-In 17-50396 TPMS Valve for Dodge Ram Dually with Aluminium Wheels DESCRIPTION TPMS Snap-In Valve for Ford TPMS Snap-In Square Key WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

230 VALVE HARDWARE TPMS Accessories & Kits (cont.) SCHRADER TPMS ACCESSORY KITS • The OEM requires that the four sealing components be replaced when re-installing a TPMS sensor • The replacement components are supplied in TPMS accessory kits, which are sensor specific • EACH TPMS ACCESSORY KIT CONTAINS: 1 Nut, 1 Valve Core, 1 Cap, 1 Grommet SCHRADER TPMS SERVICE PACK ASSORTMENTS • The service pack should be replaced every time the tire is removed from the wheel • With Schrader’s NEW assortment kits, always have the service pack you need, when you need it! • These kits include Schrader’s 12 most popular service packs on the market today • Kits come in a convenient, durable, plastic case that organizes the service packs for faster, more efficient TPMS service 469-20097 ASCOT NO. 469-20002 469-20004 469-20006 469-20007 469-20009 469-20010 469-20012 469-20013 469-20014 469-20015 469-20017 469-20018 469-20019 469-20020 469-20022 469-20023 469-20030 469-20031 469-20032 469-20035 469-20036 469-22008 469-20037 469-20038 469-20039 469-20040 469-20041 469-20043 469-20046 469-20047 469-20049 469-20635 469-20895 469-22005 MFG. NO. DESCRIPTION 20002 Accessory Kit for ford Transmitters - Replaces 469-29601 & 469-23501 20004 Accessory Kit for GM Transmitters - Replaces 469-20701 & 469-21601 20006 Accessory Kit for Hummer Transmitters 20007 Accessory Kit for Alloy Wheel Nissan Transmitters 20009 Accessory Kit for Suzuki Replacement Transmitter 20010 Accessory Kit for Prowler Replacement Transmitter 20012 Accessory Kit for Corvette Replacement Transmitter 20013 Accessory Kit for Dodge Nitro Transmitters 20014 Accessory Kit for Nissan Transmitters 20015 Accessory Kit for GM/TRW Transmitters 20017 Accessory Kit for Volkswagen/Siemens Transmitters 20018 Replacement Snap-In Valve ford 20315 Transmitter, Box of 50 20019 Accessory Kit for Honda/Acura Transmitters 20020 TPMS Service Pack - Stem Only - Chrysler, Dodge, Jeep 20022 Accessory Kit for Hyundai/Kia Transmitters 20023 Accessory Kit for Beru Stems - No Valve 20030 Accessory Kit for Chrysler/Siemens Transmitters 20031 Accessory Kit for Pacific Transmitters 20032 Accessory Kit for Toyota/Pacific Transmitters 20035 Accessory Kit for TRW Long Valve Transmitters 20036 Accessory Kit for TRW Short Valve Transmitters 22008 Assembled Chrome Replacement Snap-In Valve for Schrader 20153 Transmitter 20037 Accessory Kit - Silver Insert - for Audi, BMW, Hyundai, Kia, Mercedes, Porsche, VW 20038 Accessory Kit - Green Insert - for Audi, BMW, Hyundai, Kia, Mercedes, Porsche, VW 20039 Accessory Kit - Black Insert - for Audi, BMW, Hyundai, Kia, Mercedes, Porsche, VW 20040 Accessory Kit - Orange Insert - for Audi, BMW, Hyundai, Kia, Mercedes, Porsche, VW 20041 Accessory Kit - Schrader Aluminum Grommet Seat for Adjustable angle stem, 25 Pack 20043 Accessory Kit - Continental Rubber Snap-in Valve OE# 68193587AB, 50 Pack 20046 Accessory Kit for Schrader High-Speed Snap-In, 50 Pack 20047 Accessory Kit for Schrader Gen Gamma Adjustable Angle Aluminum Clamp-in Stem, 50 Pack 20049 Accessory Kit for Schrader Gen Gamma Adjustable Angle Aluminum Clamp-in Stem (Mercedes), 50 Pack 20635 Accessory Kit for TRWl Rubber Snap-in Valve, 50 Pack 20895 Replacement T-10 Screws, 100 Pack 22005 TPMS Snap-In Dress Up Kit 469-20898 ASCOT NO. 469-20097 469-20898 MFG. NO. DESCRIPTION 20097 Small Assortment Kit. INCLUDES: 30 Bags (5 ea) Accessory Kits for Each Transmitter Size, 25 Plastic Valve Caps and Core Tool 469-20698 20698 Accessory Assortment Kit w/ EZ-sensor. 1 PLASTIC TRAY CONTAINING: 10 Each of Schrader's 12 Most Popular Accessory Kits (20002, 20003, 20004, 20007, 20008, 20013, 20014, 20020, 20023, 20030, 20032, 20036), four 315MHz EZsensors 33000 & (2) 433MHz 469-20798 20798 INCLUDES 8 UNITS OF EACH SERVICE PACK: 20004, 20007, 20009, 20013, 20014, 20018, 20020, 20023, 20030, 20032, 20036, 20049 20898 INCLUDES 8 UNITS OF EACH SERVICE PACK: 20004, 20007, 20009, 20013, 20014, 20018, 20020, 20023, 20030, 20032, 20036, 20049 6 Programmable, Single SKU EZ-sensors (# 33500) 469-20798 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 231 DILL TPMS ACCESSORY KITS ASCOT NO. MFG. NO. DESCRIPTION 469-00015 469-00031 469-00035 469-00065 469-00919 469-00925 469-09251 469-09252 469-00950 469-00951 469-01010 469-01030 469-01031 469-01040 469-01050 469-01060 469-01070 469-01077 469-01080 469-01090 469-01091 469-01092 469-01093 469-01094 469-01095 469-01096 469-01097 469-01098 469-01100 469-01110 469-01130 469-02040 469-02045 469-07000 469-07020 469-20025 469-20130 469-21010 469-21020 469-90662 VS-15 VS-30 VS-35 VS-65 VS-919 VS-925A VS-925C VS-925B VS-950 VS-1010 1030K 1031K 1040K 1050K 1060K 1070K 1077K 1080K 1090K 1091 1092 1093 1094 1095 1096 1097 1098K 1100K 1110K 1130K 2040K 2045K 7000K 7020K 2000K 2030K 2010K 2020K Rubber Clamp-In Stem for Toyota Corolla Hatchback Rubber Snap-In Valve for Nissan Kicks and Nissan Quest Clamp-In Replacement Valve for Dodge & 3500 Trucks Snap-In Replacement Valve for Dodge 1500, 2500, & 3500 Trucks For use in light truck applications fitted with rims with a 0.625 diameter rim hole using the Ford, GM, and Chrysler snap in TPMS sensor design Aluminum Metal Replacement Valve for GM Snap-in & Ford Chrome Replacement Valve for GM & Ford Snap-in Black Nut/Black Cap Metal Replacement Valve for GM & Ford Rubber Snap-In Replacement Valve for GM & Ford Transmitters 950SC/4PK TMPS Snap-IN Chrome Sleeve and Cap 4/Pack for VS-950 Rubber Snap-In Stem for Hyundai Sante Fe Siemens Kit for VW (Fits 1053 Sensor) VW Kit for Special Wheel Package Siemens Mercedes Assembled Valve Siemens Kit for Chrysler w/ Special Metal Washer Kit for Ford, Lincoln, Mercury Kit for Buick, Cadillac, Chevrolet, GMC, Isuzu, Pontiac, Saab Accessory Kit for 8006 Sensor, 97-00 Corvette Kit for Cadillac, Chevrolet, Chrysler, Dodge, Infiniti, Isuzu, Jeep, Mitsubishi, Nissan, Plymouth, Subaru Compatible with Beru Sensors Ball-seat valve stem assembly; 56mm, yellow marking Ball-seat valve stem assembly; 43mm; silver or no marking Ball-seat valve stem assembly; 48mm, green marking Ball-seat valve stem assembly; 49mm, black marking Ball-seat valve stem assembly; 51mm, orange marking TPMS Stem For Hyundai, Kia, Honda TPMS Stem For Hyundai, Kia, Honda Dodge Sprinter Replacement Valve Compatible with Pacific Sensors for Toyota/Lexus Compatible with Pacific Sensors for Toyota Kit for Mazda, Mitsubishi, Nissan Kit fo Hyundai, KIA Kit for Honda/Acura Kit for Acura, Chrysler, Dodge, Jeep, Nissan Kit for BMW, Cadillac, Honda, Hyujndai, Infiniti, Jaguar, KIA, + more & REDI-Sensor Kit for Acura, Honda, Hyundai, KIA Kit for Chrysler, Dodge, M-Benz, Nissan Kit for Saturn, Volvo Early 2007 GM Kit for Entire Sensors 9066K-LS TPMS Valve Stem Kit with ball joint COMPLETE REPLACEMENT KIT FOR CHRYSLER/DODGE TPMS APPLICATIONS • COMPLETE REPLACEMENT KIT INCLUDES THE FOLLOWING: Aluminum TPMS Valve Stem w/ Grommet, Valve Nut, Valve Core 469-90660 ASCOT NO. MFG. NO. 469-90660 9066-K DESCRIPTION Dill Chrysler TPMS Complete Stem Replacement Kit 469-01095 469-00925 469-00065 469-00035 469-00950 469-01010 469-01092 REPLACEMENT STEM FOR CHRYSLER/DODGE TPMS APPLICATIONS 469-90661 ASCOT NO. MFG. NO. DESCRIPTION 469-90661 9066-1 Dill Chrysler TPMS Replacement Stem Only WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

232 VALVE HARDWARE TPMS Accessories & Kits (cont.) UNIVERSAL MASTER TPMS TRANSMITTER HARDWARE & TOOL SERVICE SET • Versatile 152 piece assortment (15 unique kits) covers over 55 different OEM sensor models and 90% of US vehicles • TOOLS INCLUDED: A Sensor Service Tool, Ratcheting Torque Wrench, 2 Deep Sockets, 2 Torque Drivers and bits DILL TPMS 7100 ACCESSORY ASSORTMENT • INCLUDES 4 OF EACH KITS: 1130K, 1030K, 2045K, 1070K, VS-20, VS-90, 1050K, 1080K, 1100K, 2030K, 1110K, 1060K, 2010K, VS-65, 2040K, 2000K, 7020K, 1090K, 7000K and 6 EACH: VS-950 Stems • Approximately 97% coverage VERSATILE: 152 PIECES 15 UNIQUE KITS 469-07100 ASCOT NO. MFG. NO. 469-07100 7100 DESCRIPTION Dill TPMS Master Accessory Assortment DILL TPMS REPLACEMENT STEM ASSORTMENT • INCLUDES 4 OF EACH: VS-65, VS-40, VS-925C, 9066K, 1040K, VS-1010, VS-950, VS-90, VS-925B, VS-20, VS-70 and 2 OF EACH OF THE FOLLOWING: 1092, 1093, 1094, 1097K, 1096K, VS-965 • Approximately 99% coverage 469-30000 469-07300 ASCOT NO. MFG. NO. 469-30000 30000 DESCRIPTION Universal Master TPMS Set ASCOT NO. MFG. NO. 469-07300 7300 DESCRIPTION Dill TPMS Replaceable Stem Assortment BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 233 REDI-SENSOR VALVE STEMS RUBBER TPMS SNAP-IN REPLACEMENT VALVES • Rubber stem and attaching screw for snap-in transmitters • Cap & core included • Requires T-10 Torx Tool for assembly/ disassembly • VS-1010 requires 5415-2 7mm socket adapter 469-00772 469-00030 469-00771 469-00065 469-00090 469-00770 469-00045 ASCOT NO. MFG. NO. DESCRIPTION 469-00045 VS-45 469-00770 VS-70 469-00771 VS-70B 469-00772 VS-70S 469-00773 VS-70C 469-00950 Clamp-In Stem for REDI-Sensor w/ Clip Design, Chrome Plated Brass. Fits 7001HP-R & Certain OE Sensors REDI-Sensor Replacement Valve Stem w/ All Components REDI-Sensor Valve with Black Anodized Nut and Black Cap REDI-Sensor Valve Stem with Cap and Core Assembled Chrome Valve Stem Assembly for OE and REDI-Sensor™ ASCOT NO. MFG. NO. 469-00015 VS-15 469-00030 469-00065 469-00090 DILL ALUMINUM REPLACEMENT TPMS STEM • Metal Replacement Clamp-In Valve for GM, Ford, Dodge Ram, Subaru & Suzuki • Made from anodized aluminum • T-10 screw included • QUANTITY: Packaged 20 per box 469-00200 469-00950 469-01010 469-20018 VS-30 VS-65 VS-90 VS-20 VS-950 VS-1010 20018 DESCRIPTION Rubber Snap-In TPMS stem for Toyota; includes stepped screw Rubber Snap-In TPMS Stem w/ Clip Snap-In Replacement Valve for Dodge 1500, 2500 & 3500 Trucks Rubber Valve Stem Kit for New Dodge and GM Transmitters Rubber Snap-In for GM & Ford Transmitters Rubber Snap-In Replacement Valve for GM & Ford Transmitters Rubber Snap-In Stem for Hyundai Santa Fe Replacement Snap-In Valve for Schrader Ford 20315 Transmitter TPMS SNAP-IN CHROME SLEEVES AND CAPS 9-00951 469-00925 ASCOT NO. MFG. NO. 469-00925 469-01925 469-02925 469-01925 DESCRIPTION VS-925A VS-925B VS-925C Dill Aluminum Replacement TPMS Stem Dill Aluminum Replacement TPMS Stem - Black Dill Aluminum Replacement TPMS Stem - Chrome ASCOT NO. MFG. NO. 469-00951 DESCRIPTION 950SC/4PK TPMS Snap-In Chrome Sleeve and Cap 4/Pack for VS-950 469-02925 QTY./BOX 4 4 25 25 25 25 25 50 469-00200 469-01010 469-20018 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

234 VALVE HARDWARE TPMS Accessories & Kits (cont.) REDI-SENSOR TPMS COMBO KIT INCLUDES: 4 of Each REDI-Sensor (7001HPR, 7002A, 7003A, 7004), (5112A) Service Kit Cabinet (180 pcs) • Receive a FREE 8200 TPMS Tool Kit and 9700 Counter Aid REDI-SENSOR TPMS COMBO KIT INCLUDES: 4 of each REDI-Sensor (7001HPR, 7002A, 7003A, 7004), (7100 Kit) Service Kit Assortment (86 pcs • Receive a FREE 4065 Toolkit and 9700 Counter Aid 469-07415 469-17415 ASCOT NO. MFG. NO. 469-07415 7415A DESCRIPTION REDI-Sensor TPMS Combo Kit ASCOT NO. MFG. NO. 469-17415 7415 DESCRIPTION REDI-Sensor TPMS Combo Kit BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 235 DILL CLAMP-IN REPLACEMENT TPMS VALVE STEMS 469-00240 469-00241 469-00917 469-00919 ASCOT NO. MFG. NO. 469-00241 469-00917 469-00919 VS-241 VS-917 VS-919 DESCRIPTION 469-00240 VS-240MC Silver Chrome Clamp-In 0.453 TPMS Stem. Compatible anywhere a VS-65 or VS-20 is used OEM. Fits Dill 5001/5002; 10 pack. Clamp-In TPMS Valve for 2017 Ford Truck & Ram 3500. Includes USA Double Seal Cap. 6 Per Pack. Chrome Clamp-In 0.625 TPMS Stem. Used on 7001HP-R REDI-Sensor with Push Button. Silver Clamp-In 0.625 TPMS Stem. Compatible anywhere a VS-950 is used OEM. TPMS KIT FOR REDI-SENSOR 469-07020 469-07000 ASCOT NO. MFG. NO. 469-07000 469-07020 7000K 7020K DESCRIPTION TPMS Kit for OE Sensors TPMS Replacement Component Kit for REDI-Sensor and OE Sensors WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

236 VALVE HARDWARE TPMS Tools VALVE CORE TORQUE TOOL TPMS TORQUE WRENCHES AND SOCKETS • Perfect for tightening grommet nut to manufacturer specifications • Periodic calibration recommended • Preset torque guarantees correct setting every time on all cores • Calibrated to 4 in.-lbs. of torque • Meets the Tire & Rim Association (TRA) specifications for installing valve cores on TPMS applications • Can be used to install and remove cores in standard valves 469-00044 ASCOT NO. MFG. NO. 469-00044 168-00652 T-10 TORQUE TOOL WITH REPLACEABLE TIP 469-10215 469-10315 • Installs replacement snap-in valves to Schrader snap-in transmitters • Preset to 12 in./lbs. ASCOT NO. MFG. NO. 168-00652 469-10215 469-10315 DESCRIPTION AS-652H TPMKT015-2 1/4" Drive Torque Wrench 10-150 In./Lbs. 11mm Chrome Socket TPMKT015-3 12mm Chrome Socket 469-20140 469-15415 DESCRIPTION TPMS-4VC Valve Core Torque Tool 1/4" SOCKET DRIVER • Durable screwdriver handle and a chrome vanadium shank • Ideal for use with the TPMS 11mm x 12mm flip socket • 6" Overall Length, 2-1/2" Shank Length • MADE IN THE USA ASCOT NO. MFG. NO. 469-15415 469-20140 469-25415 469-35415 15415 20140 15415-1 5415-2 MADE IN THE USA CHROME VANADIUM SHANK 319-72521 ASCOT NO. MFG. NO. 319-72521 7252100 DESCRIPTION 1/4" Socket Driver DESCRIPTION T-10 Torque Tool w/ Replaceable Tip T-10 Torque Tool Replacement T-10 Tip Replacement 7mm Socket for VS-1010 TPMS Snap-In Stem T-20 TORQUE TOOL WITH REPLACEABLE TIP • Installs replacement Beru clampin valves • Preset to 35 in./lbs. ASCOT NO. MFG. NO. 469-15535 469-25535 15535 15535-1 469-15535 DESCRIPTION T-20 Torque Tool w/ R Replacement T-20 T BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 237 METAL GROMMET REMOVAL TOOL • Makes grommet and metal washer installation/removal easy and safe • MADE IN THE USA VALVE CORE TOOLS: SCREWDRIVER TYPE & STANDARD BORE LONG VALVE MADE IN THE USA GOOD GRIP & LEVERAGE ASCOT NO. MFG. NO 469-04700 4700 Metal Grommet Removal Tool ASCOT NO. MFG. NO. 469-00607 607 469-00612 612 DESCRIPTION Screwdriver Type Valve Core Tool Standard Bore Long Valve Core Tool GROMMET INSTALLATION/ REMOVAL TOOL ASCOT NO. MFG. NO. 469-20144 20144 DESCRIPTION Grommet Installation/ Removal Tool 469-20144 PRE-SET TORQUE TOOLS FOR TPMS • Never adjust a TPMS torque wrench again • Durable and long-lasting • NO MORE TORQUE ERRORS: It is either “Hi” or “Low” • Ergonomically designed hand grip • Open cross chamber on the 5565 allows for extra leverage bar CORE CAP REMOVAL TOOL 469-20250 • Easily installs and removes valve caps and valve cores • Two-in-one tool ASCOT NO. MFG. NO. DESCRIPTION 469-20250 20250 NO MORE TORQUE ERRORS 469-00607 • Has a plastic screwdriver handle for better grip and leverage MADE IN THE USA 469-00612 Core/Cap Removal Tool SCREWDRIVER/CORE TOOL • Lock-On Feature For The Valve Core • Metal Pocket Clip • Flat-Head Screwdriver Tip ASCOT NO. MFG. NO. DESCRIPTION 469-00673 673-D 469-05565 LOCK FEATURE Screwdriver/Core Tool ASCOT NO. MFG. NO. 469-05540 469-05565 5540 5565 469-05540 DESCRIPTION TPMS Preset Torque Tool: Preset at 40 in./lb. TPMS Preset Torque Tool: Preset at 65 in./lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

238 VALVE HARDWARE TPMS Tools (cont.) VALVE STEM WRENCH KIT • Kit includes 9/16" & 5/8" valve stem wrenches in durable pouch 469-01820 TIRE DEFLATOR/ VALVE CORE REMOVER • Screws on TPMS valve stems to deflate the tire without removing the valve core 469-00021 DURABLE POUCH ASCOT NO. MFG. NO. DESCRIPTION 469-00021 TL-615 Tire Deflator/Valve Core Remover TIRE DEFLATOR SET ASCOT NO. MFG. NO. 469-01820 469-00018 469-00020 DESCRIPTION VSW-1820-KIT Valve Stem Wrench Kit VSW-18 VSW-20 9/16" Single Hex Valve Stem Wrench 5/8" Double Hex Valve Stem Wrench • Simply replace a standard sized valve cap with this handy tool and the special design will depress the pin in the valve core • Large openings on the sides of the tool allow air to escape quickly from the tire • Tools are marked so tires can be returned to their original position on the vehicle so TPMS will not need to be reset • Also saves time since the valve core has not been removed from the sensor • Packaged in a set of 4 TPMS VALVE STEM FISHING TOOL • Secures TPMS sensor to wheel during demount • One handle end can be used as a deflator; the other as a core remover • 3" Overall length ASCOT NO. MFG. NO. 469-08910 8910 DESCRIPTION TPMS Valve Stem Fishing T 469-08910 DEFLATES PRESSURE SLOWLY TIRE DEFLATOR SET FOR TPMS VALVE STEMS 469-19860 ASCOT NO. MFG. NO. DESCRIPTION 469-19860 19860 Tire Deflator Set for TPMS Valve Stems ASCOT NO. MFG. NO. 469-51632 TD-1808 DESCRIPTION Tire Deflator Set 469-51632 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 239 TPMS MECHANICAL TOOL KIT TPMS MASTER TOOL KIT • Accurately and quickly install and remove any TPMS component • NO MORE TORQUE ERRORS: Simplest TPMS set available +/- 1% ACCURACY 469-10110 469-08200 ASCOT NO. MFG. NO. 469-10110 ASCOT NO. MFG. NO. 469-08200 8200 DILL NO. 4700 5540 5565 (w/ 5540 & 5565) 5414 5415 5417 5535 8910 NA N/A TYPE Grommet tool Speed Torque 40 IN-LB Speed Torque 65 IN-LB Drive Sockets Valve Core Torque Tool Torque Screwdriver Beru Valve Holding Tool Torque Screwdriver 3-way Fishing Tool T-bar Case DESCRIPTION Dill TPMS Master Tool Kit DESCRIPTION DILL TPMS MASTER TOOL KIT CONTENTS TPMS Easily remove and install TPMS valve stem grommets Fast and accurate TPMS installer for 45 in./lbs. and below Service Kits Fast and accurate TPMS installer for 65 in./lbs. and above Service Kits 11mm and 12mm deep well sockets Installs valve cores to recommended torque (3.5 in./lbs.) Torque T-10 screw installation, 12.5 in./lbs. (i.e. VS-950 rubber stem). Holds Beru valve in place for easy installation Torque T-20 screw installation, 35 in./lbs. (i.e. VS-80 rubber stem) Retains sensor in a secure position, deflates, removes the core May be used for extra leverage with the speed torque tools Hard plastic case to keep all of your items secure ASCOT NO. MFG. NO. 469-04065 4065 DESCRIPTION Dill TPMS Mechanical Tool Kit DILL TPMS MECHANICAL TOOL KIT CONTENTS: 2 Sockets: 11mm & 12mm 40 in./lbs. Preset Torque Driver 65 in./lbs. Torque Driver 469-04065 TPMS MECHANICAL TOOL KIT TPMS MECHANICAL TOOL KIT CONTENTS: 1/4" Torque Screwdriver 10-80 in./lbs. Torque Valve Screwdriver 4 in./lbs. 2 Sockets: 11mm & 12mm 1/4" Adapter 4 Bits: T5, T10, T15 & T20 Grommet Tool DESCRIPTION TPMKT01 TPMS Mechanical Tool Kit WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

240 VALVE HARDWARE TPMS Transmitters SCHRADER OE REPLACEMENT TPMS SENSORS • Include transmitter, grommet, nut, cap & core ASCOT NO. MFG. NO. 461-21507 461-29020 461-29093 21507 O.E. NO. 321507 29020 Multiple 29093 68402371AA DESCRIPTION Snap-in Faraday 315MHz GM Global A ASK Basic Snap-in Basic Faraday Gen 6 315MHz Ford Global Spec FSK Chrysler Snap-In Type Repl. Transmitter REDI-SENSOR MULTI-APPLICATION SENSOR • Installs right out of the box • No programming required, saving you 8-10 minutes per vehicle • Reduces replacement sensor inventory • Adjustable valve stem design • Fits over 90% of the market • No additional training required • All REDI-Sensors are available in a rubber stem format Valve core, stem and hex nut treated against corrosion 001 Valve cap seal minimizes air loss 461-07002 Technically superior valve sealing design Pivoting valve stem makes installation easier and accommodates a wide range of wheel rim profiles 461-07003 ASCOT NO. MFG. NO. DESCRIPTION 461-07001 461-07002 461-07003 461-07004 461-07011 7001HP 7002A 7003A 7004 315MHz REDI-Sensor Multi-Application Sensor (Clamp-In Style) REDI-Sensor for Honda, Hyundai, Kia, Lexus, Toyota & Scion 315MHz REDI-Sensor Multi-Application Sensor (Clamp-In Style) 433MHz REDI-Sensor Multi-Application Sensor (Clamp-In Style) 7001HP-R 315MHz REDI-Sensor Multi-Application Sensor (Snap-In Style) BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 241 Dill Replacement TPMS Transmitters DILL TIRE PRESSURE MONITORING SYSTEM (TPMS) TRANSMITTERS • INCLUDES: Transmitter, grommet, nut, cap & core ASCOT NO. MFG. NO. DESCRIPTION Huf BMW 1027 1029 1043 1044 1045 1052 1055 1056 1068 1203 1208 1209 1212 1214 1216 Entire Kia Spectra/Rio Siemens 2008 Chrysler 2007-2008 Volvo 2008-2011 Land Rover - 315 MHz Siemens 2004 Chrysler Siemens Land Rover/Jaguar Siemens Mazda Hyundai/Kia 461-01208 461-01209 461-01212 461-01214 461-01216 461-01217 461-01218 461-01222 461-01225 461-01230 461-01382 461-02112 461-02168 461-02510 461-03751 461-05134 461-05256 461-05276 461-05507 461-05510 461-05511 461-05512 461-05513 Toyota - 40 Degree Angle Honda Accord/CRV/Fit Honda Pilot/Some Acura Honda Civic Honda/Acura Nissan 1217-WH Lexus SC 430 White 1218 1222 1225 1230 1382 2112 2168 2015-16 Tesla 2510 3751 5134 5256 5276 5507 5510 5511 5512 5513 2014-2015 Kia Tucson/ Sportage/Forte 2016 Honda Pilot 2015 Volvo 2014 BMW 2015 Land Rover Hyundai/Kia 2015 Hyundai Genesis/Santa Fe Honda/Acura 2013 Acura RDX 2013 Acura ILX 2012 Toyota Camry, Yari Hyundai - Only Use w/ Bartec Rev. 2014 Highlande/RAV4 RKE 2015 Toyota Camry Nissan Titan XD Tesla 461-01027 461-01029 461-01043 461-01044 461-01045 461-01052 461-01055 461-01056 461-01068 461-01203 ASCOT NO. MFG. NO. DESCRIPTION 461-05514 461-05523 461-05555 461-05556 461-05557 461-05558 461-05559 461-05775 461-06815 5514 5523 5555 5556 5557 5558 5559 5775 6815 461-06825 461-06829 461-09001 461-09002 461-09003 461-09004 461-09005 461-09011 461-09012 461-09013 461-09017 461-09018 461-09159 461-09204 461-09280 461-09342 461-09398 461-09505 461-11204 461-11217 461-21217 461-31217 6825 6829 9001 9002 9003 9004 9005 9011 9012 9013 9017 9018 9159 9204 9280 9342 9398 9505 1204 1217-BL 1217-RD 1217-YL Acura ILX/MDX//RDX/TLX 2017 Hyundai Elantra/Kia Sportage Nissan 2013 Nissan Altima/Pathfinder Nissan 2014 Infiniti Q50 2014 Nissan Rogue 2013 Dodge Dart 2014 Dodge Ram/Jeep Cherokee Snap-In Rubber Stem and Sensor for Inner Dual on Dodge Ram Clamp-In Stem and Sensor for Outer Alloy on Dodge Ram HUF RDE 001 for Audi/ Mercedes - 433MHz HUF RDE 002 for BMW 3/5/7 Series - 433 MHz HUF RDE 003 for BMW X5/ Land Rover - 433MHz HUF RDE 004 for Mercedes HUF RDE 005 Cayenne/ Touareg - 433 MHz 2010 Audi 2010 BMW, Mini Cooper 2013 Volkswagen CC 2013 BMW 3-Series 2014 Panamara 2008+ Saab 9-3 Nissan 2015 Ford Mustang/F-150 Series Nissan NV Chrysler Snap-In Hyundai Velostar, Azera Toyota/Lexus Lexus SC 430 Blue Lexus SC 430 Red Lexus SC 430 Yellow 461-01057 461-06815 461-01212 461-01051 461-01043 461-09011 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

242 VALVE HARDWARE Aftermarket TPMS Accessory Kits AFTERMARKET TPMS ACCESSORY KITS ASCOT NO. 468-17490 468-17491 468-17492 468-17493 468-17592 468-17593 468-17692 469-17107 469-17198 469-17205 469-17206 469-17207 469-17208 469-17209 469-17210 469-17211 469-17212 469-17213 469-17214 469-17215 469-17216 MFG. NO. 17-490T 17-490TY 17-492L-1 17-493NP 17-492T-1 17-493P 17-492LG-1 17-20107AK 17-20198AK DESCRIPTION TPMS High Temp (Red) Valve Core Nickel Plated TPMS High Temp Valve Core, Nickel Plated, YELLOW Band Long Skirted Black Plastic Cap with Seal for 17-20008 469-17223 Chrome Plated Plastic Cap, Green Top Gray Plastic TPMS Valve Cap with Red Silicone Seal Chrome Plated Plastic Cap Long Skirted GREEN Plastic Cap with Seal for 17-20008 TPMS Parts Kit for GM Applications TPMS Parts Kit for Dodge Sprinter Applications 17-20005AK TPMS Parts Kit for Nissan Applications 17-20006AK TPMS Parts Kit for GMC, Hummer, Isuzu Applications 17-20007AK TPMS Parts Kit for Nissan, Infiniti Applications 17-20008 GM TPMS Rubber Snap-In Valve 17-20009AK TPMS Parts Kit for Saab, Suzuki Applications 17-20010AK 17-20011AK 17-20012AK 17-20013AK 17-20014AK 17-20015AK 17-20016AK TPMS Parts Kit for Volvo Applications TPMS Parts Kit for Subaru Applications TPMS Parts Kit for Prowler, Corvette Applications TPMS Parts Kit for Dodge, Jeep, Chrysler Applications TPMS Parts Kit for Nissan, Infiniti Applications TPMS Parts Kit for GM with TRW Clamp-In Sensor TPMS Parts Kit for Mercedes, Smart Applications 469-17224 469-17226 469-17227 469-17228 469-17235 469-17236 469-17272 469-17275 469-17296 469-17311 469-17316 469-17317 469-17320 469-17321 469-17323 469-17420 468-17792 17-20203AK ASCOT NO. 469-17218 469-17221 469-17222 MFG. NO. 17-20018 17-20201AK 17-20202AK DESCRIPTION TPMS Ford Rubber Snap-In Valve TPMS Parts Kit for Chrysler, GM Applications TPMS Parts Kit for Audi, Mercedes, Volkswagen Applications TPMS Parts Kit for Audi, Mercedes Application 17-20204AK TPMS Parts Kit for Acura, Honda, Kia Applications 17-20206AK TPMS Parts Kit for Hyundai, Honda, Kia Applications 17-20207AK TPMS Parts Kit for Volkswagen Applications 17-20028AK TPMS Parts Kit for Chrysler, Dodge, Mitsubishi Applications 17-20035AK TPMS Parts Kit for Honda Applications 17-20036AK TPMS Parts Kit for Acura, Honda, Kia Applications 17-20720AK 17-20725AK TPMS Parts Kit for Conti OE Sensors & Redi-Sensor TPMS Service Kit with Valve 17-20096AK TPMS Parts Kit for Ford Applications 17-20211AK 17-20216AK 17-20217AK 17-20020 17-20221AK 17-20223AK TPMS Parts Kit for Misc. Import Applications TPMS Parts Kit for Lexus/ Toyota Applications TPMS Parts Kit for Lexus/ Toyota Applications TPMS Stem Only for Chrysler, Dodge, Mercedes TPMS Parts Kit for Lexus SC430 Applications TPMS Parts Kit for GM (SS Corvette) 17-20020AK TPMS Parts Kit + Stem for Chrysler, Dodge, Mercedes Applications 17-492-1 Black Plastic Valve Cap w/ Red Silicone Seal 469-17275 469-17211 469-17210 469-17208 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 243 Smart Sensor Pro+ SMART SENSOR PRO+ PROGRAMMING/SCANNING TOOL • Quickly & easily program Smart Sensor “blank” sensors to emulate the protocol • Program a Smart Sensor in seconds • Copies the original sensor ID to Smart Sensor • Recognized by specific vehicles • Scans OE sensors • Free lifetime updates • Replacement Sensors and stems available SMART SENSOR ONE UNIVERSAL TPMS SENSORS & REPLACEMENT STEMS • Combines 314.9 MHz, 315 MHz & 433.92 MHz all in one sensor • 99% vehicle application coverage • Reduces TPMS service time • Reduces Inventory • Truly universal/programmable sensor • Supports future vehicle applications & Auto-Locate technologies (WAL, PAL, LocSync) • Manufactured & tested to OE specifications & quality/performance standards 99% MARKET COVERAGE 461-17441 461-17442 469-17446 469-17447 469-17144 469-17448 469-17449 469-17450 ASCOT NO. MFG. NO. 461-17441 17-43041 461-17442 The Smart Sensor Pro+ Programming/Scanning Tool with Replacement Sensors* (available separately). ASCOT NO. MFG. NO. 469-17144 17-144 DESCRIPTION Smart Sensor Pro+ Programming/Scanning Tool 469-17446 469-17447 469-17448 469-17449 469-17450 469-17452 17-43042 17-43046 17-43047 17-43048 17-43049 17-43050 17-43052 DESCRIPTION Smart Sensor One Universal TPMS Sensor w/ Rubber Snap-In Valve Smart Sensor One Universal TPMS Sensor w/ Metal Clamp-In Valve Rubber Snap-In Valve for Smart Sensor One Gloss Black Valve for Smart Sensor One Matte Black Valve for Smart Sensor One Aluminum Valve for Smart Sensor One Polished Chrome Valve for Smart Sensor One Valve Adapter for Smart Sensor One 469-17452 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

244 VALVE HARDWARE PRO+ SMART SENSOR OBDII MODULE • Turns your Smart Sensor Pro+ Tool into a complete TPMS service tool capable of performing both stationary and OBDII relearns • Perform OBDII relearns on Asian and Domestic vehicles where OBDII is required, when installing a new sensor or rotating tires • Download TPMS sensor ID’s from the ECU for advanced diagnostics SMART SENSOR ELITE PROGRAMMING & DIAGNOSTIC TOOL KIT Turns your Smart Sensor Pro+ Tool into a complete TPMS service tool capable of performing both stationary and OBDII relearns. • Easy to Follow Icon Based Interface • Perform both Stationary & OBDII relearns with ease • Comprehensive relearn procedures built-in the tool • TPMS placard adjusting • Read sensor IDs by OBDII & copy directly onto a Smart Sensor • Simple wireless update • OE Sensor Information including part no. & ID Locator • VIN CODE SCANNER: Fast & accurate • CAPTURED TIRE IDENTIFICATION NUMBER (TIN): Aids in tire registration process • Upload VIN/TIN, via PC, to dealer’s shop software • Print TPMS & VIN/TIN data via PC 469-17140 469-17145 ASCOT NO. MFG. NO. DESCRIPTION 469-17145 17-144-2 Pro+ Smart Sensor OBDII Module - 2-Piece Kit SMART SENSOR ELITE BLUETOOTH TOOL OBDII MODULE • WIRELESS: No cable necessary • Perform OBD II relearns • Greatly simplifies relearn process on Mitsubishi vehicles SMART SENSOR ELITE PROGRAMMING & DIAGNOSTIC TOOL KIT CONTENTS PARTS INCLUDED 469-17141 Smart Sensor Elite Programming and Diagnostic Tool Micro USB Data Cable and Charger PARTS INCLUDED Robust Commercial Grade, OBD II Cable TPMS Activation Magnet ASCOT NO. MFG. NO. DESCRIPTION 469-17140 17-140 ASCOT NO. MFG. NO. DESCRIPTION 469-17141 17-140-1 Smart Sensor Elite Bluetooth Tool OBDII Module Smart Sensor Elite Programming & Diagnostic Tool Kit BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 245 Tubeless Tire Valves (Passenger) SNAP-IN TUBELESS TIRE VALVES • Dill, Schrader or equivalent available ASCOT NO. TR NO. 461-00438 461-00412 461-00413 461-00414 461-00418 461-00423 438 412 413 414 418 423 EFFECTIVE LENGTH FOR .346" VALVE HOLES 11/32" FOR .453" VALVE HOLES 7/8" 1-1/4" 1-1/2" 2" 2-1/2" 461-00415 461-00425 FOR .625" VALVE HOLES 1-1/2" 2" 415 425 HIGH PERFORMANCE VALVE TR414 TR418 TR423 TR438 • Chrome plated clamp-in valves are easily installed in all types of passenger car wheels • For .453" or .625" valve holes CHROME-SLEEVE SNAP-IN TYPE TUBELESS TIRE VALVES • Standard snap-in type tubeless tire valves are fitted with an attractively designed hexagon valve cap and chrome sleeve to cover the valve stem area • Available in two lengths to fit .453" valve holes ASCOT NO. TR NO. 461-41211 461-41311 461-41811 412SC 413SC 418SC EFFECTIVE LENGTH 7/8" 1-1/4" 2" HIGH PRESSURE SNAP-IN VALVES • Tubeless snap-in type valves for high pressure applications • Maximum cold inflation pressure is 80 PSI • For .453" or .625" rim holes • Do not use on tire rims that exceed .205" in thickness at the valve hole ASCOT NO. TR NO. 461-00600 461-00602 461-00801 461-00802 EFFECTIVE LENGTH 600HP 1.27" 602HP 801HP 802HP 2" 1.25" 2" ! CAUTION SUPPLY CORPORATION VALVE HOLE DIAMETER .453" .453" .625" .625" 461-00600 461-41311 ASCOT NO. MFG NO. DILL NO. 462-06010 462-06020 462-06030 462-06040 DESCRIPTION TV-6010 VS-934E 3/4" Length, Standard TV-6020 VS-933E Bent at 45° Angle TV-6030 VS-936E 1-1/4" Length, Standard TV-6040 VS-935E 1-3/4" Length, Standard HIGH PRESSURE CHROME SLEEVE TIRE VALVE • Used to 80 PSI cold inflation pressure • Fits 453" diameter valve hole, maximum rim thickness .205" at valve hole • Chrome sleeve ASCOT NO. TR NO. 461-01600 461-00602 DESCRIPTION 600HPC High Pressure Chrome Sleeve Tire Valve IMPORTANT: Snap-in passenger valve stems are safe for tire pressures up to a maximum of 65 PSI (cold tire pressure) and for a maximum rim thickness of .156” (3.9mm). If greater pressure or rim thickness is required, metal clamp-in valve stems are recommended. 461-01600 ASCOT NO. MFG NO. DESCRIPTION 462-00800 VS-944 ENKEI VALVES • A high performance “No Show” type chrome plated valve that installs from the outside • A rubber washer and nut are on the inside • Fits .453" diameter hole 462-06020 High Performance Valve 462-00800 Dill Signature Cap TR412 TR415 TR413 CLAMP-IN TUBELESS TIRE VALVES • Nickel plated metal valves can be installed in all passenger cars, light trucks and industrial rims with .453" or .625" valve holes • Rubber grommet forms a seal when valve is clamped to rim by tightening hex nut • Maximum inflation pressure is 200 PSI • Includes 2 rubber grommets ASCOT NO. TR NO. EFFECTIVE LENGTH 462-00416 461-01416 416 416L 1-1/4" 2" REPLACEMENT GROMMETS • Replacement grommets for .453" and .625" valve holes ASCOT NO. TR NO. EFFECTIVE LENGTH 468-59765 468-99393 RG-54 RG-39 Grommet for .453" Hole Grommet for .625" Hole 468-59765 462-00416 462-06040 WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

246 VALVE HARDWARE Tubeless Tire Valves (Truck) TRUCK & BUS TUBELESS TIRE VALVES: 570 SERIES • Used on both demountable and non-demountable rims with standard 5/8" (.625") side hole valve mountings • Heavy duty rubber grommet forms airtight seal when valve is clamped in rim by tightening the hex nut • Eight valves cover all truck rim requirements • Available in custom bends • Dill or Haltec equivalent available ASCOT NO. TR NO. 463-00575 463-00501 463-00500 463-00570 463-00571 463-00572 463-00573 463-00574 575 501 500 570 571 572 573 574 EFFECTIVE LENGTH 1-1/8" 1-1/2" 2" 3-1/8" 3-3/8" 3-3/4" 4-3/8" 5" REPLACEMENT VALVE COMPONENTS • Packaged 100 per Box ASCOT NO. DILL NO. DESCRIPTION 468-00103 468-00462 468-00765 468-01462 468-02462 100-TB 462G 765 462-F 462 Dill Replacement Core Dill Green High Temp Grommet Dill Replacement Dome Cap Dill Red High Temp Grommet (-50F to 400F) Dill Black Rubber Grommet ASCOT NO. TR NO. A B C 540 SERIES 463-00573 463-00500 463-00542 463-00543 463-00544 463-00545 463-00546 542 1.25" — — 543 2.31" — — 544 2.86" — — 545 3.50" — — 546 4.25" — — 463-01544 544C 0.86" 1.94" 45˚ 463-05433 543C 0.93" 1.43" 45˚ 463-05434 543D 0.98" 1.38" 60˚ 463-05435 543E 0.98" 1.38" 75˚ 463-05444 544D 0.98" 1.94" 60˚ 463-05454 545D 0.98" 2.60" 60˚ 463-05464 546D 0.98" 3.35" 60˚ 463-05465 546E 0.98" 3.35" 75˚ 463-05474 547D 0.98" 3.78" 60˚ 463-15454 545E 0.98" 2.60" 75˚ 463-54636 546-36 0.98" 3.35" 36˚ 468-10060 RG-60 Repl. O-Ring TR-540 Series TUBELESS VALVES FOR ALUMINUM DISC WHEELS • For drop-center aluminum disc wheels with 5/8" bottom valve hole ASCOT NO. TR NO. EFFECTIVE LENGTH 463-00509 463-00510 463-00511 468-05093 509 510 511 509-3 4-3/4" 5-1/2" 4-1/4" Replacement Rubber Grommet ASCOT NO. MFG NO. NITROGEN O-RING & SLEEVES • Fits 540 and 570 Truck Valves • Nitrogen use in truck tires ASCOT NO. TR NO. 468-00307 TS-0R O-Ring 468-00607 NITSLV Indicator Sleeves 468-00307 468-00607 DESCRIPTION ETRTO BEND 27° A B 462-04100 41 MS-00 V3-20-1 STR 1-3/16" — 462-06027 60 MS-27 — 462-07025 70 MS-27 V3-20-5 27° 462-08027 80 MS-27 V3-20-7 27° 462-09027 90 MS-27 V3-20-4 27° 462-11527 115 MS-27 V3-20-6 27° 7˚ 70 MS-7 — 1-3/16" 1-3/16" 1-3/16" 1-9/16" 1-3/16" 2" 1-3/16" 2-3/8" 1-3/16" 3-3/8" 468-00707 — — 462-09027 463-00509 METRIC RIM HOLE VALVES (9.7MM VALVE HOLE) • Some imported trucks will have steel wheels that incorporate the 9.7mm valve hole (.382") • Most popular valves for this application • Other sizes available upon request 463-01555 ALUMINUM WHEEL TRUCK TUBELESS TIRE VALVES: 540 & 550 SERIES • Designed for use with 9.7mm (.382") rim hole • Rubber O-ring forms a seal when valve is clamped to rim by tightening hex nut • Designed specifically for use in aluminum wheels • Dill or equivalent available • 550 Series equipped with rubber grommet ASCOT NO. TR NO. A B C 550 SERIES 463-00552 463-00553 463-01553 463-02553 463-03553 463-03554 552 1.25" — — 2.31" — — 553 553C 0.93" 1.43" 45˚ 553D 0.98" 1.38" 60˚ 553E 0.98" 1.38" 75˚ 554C .98" 1.94" 45° 463-02554 554D 0.98" 1.94" 60˚ 463-01555 555D 0.98" 2.60" 60˚ 463-02555 555E 0.98" 2.60" 75˚ 468-10070 RG-70 Grommet for 550 Series 468-00707 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 247 Truck & Specialty Valves RADIAL COMMANDER VALVE FOR 15" DISC WHEELS • 23° bend clamp-down valve for .625" valve hole • Bend allows clearance of brake drum for tire service • Cap and core not included ASCOT NO. MFG NO. 462-01147 462-01224 VS-1224 DESCRIPTION VS-1223R Radial Commander Valve. Made in the USA. Longer Radial Commander Valve for Equal Applications 462-01224 ALLOY VALVE • Light alloy valve used on racing and light alloy wheels • Fits .453" valve hole • Has O-ring seal VALVE FOR 16 X 6KS WITH OVAL HOLE • Oval rim slot valve for 16 x 6KS and 16 x 6-1/2LS rim contours • Allows a positive seal in this special valve hole • Check the valve hole for metal burrs prior to installation ASCOT NO. MFG NO. 462-05010 H5010V DESCRIPTION Oval Rim Slot Valve 462-05010 SPECIAL CLAMP-IN TIRE V • Designed for front wheel drive T (‘66-‘78) and Eldorado (‘67-‘78) c TRUCK/BUS SCREW-ON REPAIR VALVES • Replace damaged cured-in or cured-on valves without cutting out old valve base • 1-1/16" horizontal diameter ASCOT NO. MFG NO. EFFECTIVE LENGTH 463-01177 463-01175 463-01078 1177A 3-3/4" 1175A 4-1/2" 1078A 5" 463-01078 FORD "F" SERIES TRUCK VALVE • Ford F-Series Trucks with inner dual wheels • Sealing metal cap • 0.453" valve hole • Torque 25-45 inch/lbs. ASCOT NO. MFG NO. 462-00962 TRACTOR FRONT WHEEL VALVES • Low profile valve offers minimum protrusion above the rim • 9/16" effective length with chrome finish • Fits .453" or .625" valve holes ASCOT NO. MFG NO. 462-06008 462-16008 DESCRIPTION TV-6008C Tractor Front Wheel Valve With Chrome Finish TV-6008 Tractor Front Wheel Valve With Brass Finish 462-06008 ASCOT NO. MFG NO. 462-02416 DESCRIPTION TV-416MC Ford “F” Series Valve 462-02416 FORD “F” SERIES TRUCK VALVE • Ford “F” series with dual wheels • Accuride steel 16" x 16" • Front and rear wheels • Nickel finish • Includes dual seal cap DESCRIPTION VS-962C Ford "F" Series Truck Valve 462-00962 ASCOT NO. MFG NO. 462-00417 417 DESCRIPTION Special Clamp-In Tire Valve 462-00417 ASCOT NO. MFG NO. 462-00523 H-523MS DESCRIPTION Alloy Valve 462-00523 TUBELESS MOTORCYCLE VALVE • Has O-ring seal • Fits .327" valve holes • EFFECTIVE LENGTH: 1-13/16" ASCOT NO. MFG NO. 462-00430 TR-430 DESCRIPTION Tubeless Motorcycle Valve 462-00430 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

248 VALVE HARDWARE Truck & Specialty Valves (cont.) FORD “F” SERIES TRUCK VALVE • Ford “F” series with dual wheels • Alcoa aluminum 16" • Front and rear wheels • Chrome finish • Includes dual seal cap O-RING SEAL SILICONE TRUCK VALVES • Handles any type of high temp application • Operating temperature from -67˚F to 500˚F • Seals between the rim and valve more effectively • REPLACEMENT O-RINGS AVAILABLE (Dill 495) ASCOT NO. MFG NO. 462-01600 N-1600 DESCRIPTION Ford “F” Series Truck Valve 462-01600 -67˚F TO 500˚F HANDLES HIGH TEMPS FORD “F” SERIES VALVE • Ford “F” series with dual wheels • Accuride steel 19.5" • Front and rear wheels • Nickel finish • Includes dual seal cap ASCOT NO. MFG NO. 462-03416 DESCRIPTION TV-416/DS-1 Ford “F” Series Valve 462-03416 463-01572 FORD “CUT-AWAY” SERIES VALVE • Ford “cut-away” series with dual wheels • Accuride steel 16" x 16" wheels • Front and rear wheels • Nickel finish • Includes dual seal cap ASCOT NO. MFG NO. 462-01416 DESCRIPTION TV-416LF Ford “F” Series Valve 462-01416 ASCOT NO. MFG. NO. 463-01571 463-01572 463-01573 469-02570 469-02572 469-02573 469-29021 FORD “CUT-AWAY” AND CARGO VAN SERIES VALVE • Ford “cut-away” and Cargo van series with single rear wheels • Accuride steel 16" x 7" wheels • Front and rear wheels • Chrome Finish ASCOT NO. MFG NO. 462-01575 DESCRIPTION TV-575HP/DS-1 Ford “Cut-Away” & Cargo Van Series 462-01575 469-29022 469-29023 DESCRIPTION VS-571-EQ VS-572-EQ VS-573-EQ VS-570EQ O-Ring Silicone Truck Valve for TR571 O-Ring Silicone Truck Valve for TR572 O-Ring Silicone Truck Valve for TR573 O-Ring Silicone Truck Valve for TR570 VS-572EQ-13 O-Ring Silicone Truck Valve for TR572 - 13° Bend VS-573EQ-13 O-Ring Silicone Truck Valve for TR573 - 13° Bend VS-902W Low profile Chrome clamp-in tire valve; effective length 1.32"; 0.453" valve hole; torque: 25-45 in. lbs. VS-902WP VS-902K VS-902 with flow thru cap; effective length: 2.00" w/ cap installed; 0.453" valve hole; torque: 25-45 in. lbs. (Cross ref: N-1600) TR-416S; For Ford F-Series outer steel wheels (brass); Effective length: 1.96"; 0.453" valve hole; Torque: 25-45 in. lbs.; Made in USA (Cross ref: TV-416/DS-1) 469-29621 VS-962WZ Chrome clamp-in tire valve with 23° bend w/ plated flow thru cap; Effective legnth: 2.32" w/ cap installed; 0.453" valve hole; torque: 25-45 in. lbs. 469-02572 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 249 469-00590 NUT SPLITTER • Removes brass tire valves from truck rims • Available in manual and pneumatic ASCOT NO. MFG. NO. DESCRIPTION 469-00580 469-00590 NS58B NS59B Manual Nut Splitter Pneumatic Nut Splitter. Attaches to Pneumatic Hammer VALVE NUT TORQUE WRENCHES • Wrench flexes when proper torque setting is reached • Prevents overtightening of the valve grommet • Cushioned handle • Sizes and preset torque settings laser etched on shaft • 9/16" for TR570 series valve hex nuts • 5/8" for TR540-550 series valve hex nuts • +/- 4% accuracy ASCOT NO. MFG. NO. 168-00916 DESCRIPTION NSPTW916 9/16" Preset Valve Torque Wrench - 42 in./lb. 168-00058 NSPTW58 5/8" Preset Valve Torque Wrench - 100 in./lb. VALVE BLASTER TRUCK VALVE STEM REMOVAL TOOL • Removes valves quickly • Slide hammer with an internal spring absorbs the shock of impact • Easy to use • Designed to sheer the bottom flange off the valve with one or two blows • OAL - 63" ASCOT NO. MFG. NO. 469-22011 469-22012 VB RE DESCRIPTION Valve Blaster Truck Valve Stem Removal Tool Replaceable End for Valve Blaster Truck Stem Removal Tool 469-22011 R 168-00058 168-00916 469-00580 VALVE BREAKER • Removes valves quickly • Slide hammer with an internal spring absorbs the shock of impact • Easy to use • Designed to sheer the bottom flange off the valve with one or two blows ASCOT NO. MFG NO. 469-35934 469-32011 469-32012 35934 35936 35935 DESCRIPTION 27" Valve Breaker 45" Valve Breaker Valve Breaker Parts Kit DILL TRUCK VALVE TOOL KIT • Tool Kit for alloy and steel truck wheels • Allows you to accurately inspect, gauge and install truck valves with pre-set torque tools • Follows industry guidelines and valve hole measurements ASCOT NO. MFG. NO. 469-05700 469-05720 469-15720 5700 5720 DESCRIPTION Dill Truck Valve Tool Kit w/ 2 Open-End Torque Tools Dill Truck Valve Tool Kit w/ 1 Open-End and 1 Straight Torque Tool 5720-Poster Wall Poster of Accurate Truck Valve Installation and Inspection Processes WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

250 VALVE HARDWARE Valve Caps, Cores & Extensions STANDARD VALVE CORES • Valve cores all have .206"-36" threads and are compatible with existing U.S.A. and E.T.R.O. housing standards as well as proposed I.S.O. standards -meets specification ZZ-V-25 and TR C-1 • 5405V recommended for all truck, bus and commercial applications; general purpose heat-resistant applications • 8500TV for general purpose valve use • STANDARD PACK QUANTITY: 100 OPERATING ASCOT NO. MFG. NO. 468-00103 468-08500 PRESSURE RANGE 0-200 PSI - Peaks Of 300 OPERATING TEMP RANGE (F) OPENING PRESSURE 100-TP Up to 300 PSI Max -65° To +250°F 80 PSIG 8500TV PASSENGER VALVE CAPS 468-00103 468-08500 PLUG SEALING MATERIAL Teflon -40° To +225°F 60 PSIG Green Teflon PLUNGER SEALING MATERIAL Silicone Black Nitrile 468-06300 630N PASSENGER VALVE CAPS • Fits .305"-32" threads on standard type valves 635 650 468-00635 ASCOT NO. MFG. NO. DESCRIPTION 468-06300 468-00635 468-00650 468-00650 QTY./ BOX Gray Plastic TPMS Cap (Tall) Black Plastic TPMS Cap for VS950 Applications Gray Plastic TPMS Cap (Short) DOUBLE SEALING VALVE CAPS 468-00660 468-00680 ASCOT NO. MFG. NO. 468-00107 468-00207 468-00660 468-00680 Cap-P CAP-PG VC8 680 468-00690 468-05005 468-59019 468-59021 690 2413CS 59-0019 59-0021 468-00690 DESCRIPTION Plastic Valve Cap Green Plastic Nitrogen Cap Standard Black Plastic Valve Cap N2 Aluminum Cap for TPMS With Adhesive Green Ring N2 Plastic Painted Metalic Silver Cap for TPMS With Adhesive N2 Combination Cap/Sleeve for TR413 Green Nitrogen Indicating Aluminum Valve Cap 468-05005 468-59019 TR NO. PACK SIZE 100 100 — — VC8 — — TR413 — Chrome Plated Nitrogen Indicating Brass Valve Cap — — 100 — 468-59021 FINISH Plastic Plastic Plastic 100 Aluminum Plastic Chrome 100 Aluminum 100 Aluminum • Light weight design uses both high temperature and low temperature resistant airtight seals at extension tip and valve mouth • External grooves accommodate all industry standard air chucks and gauges • Knurled surface for easy hand installation • Increases productivity • MADE & TESTED IN THE USA MADE IN THE USA TRUCK VALVE CAPS 468-00102 ASCOT NO. MFG. NO. 468-00765 765 468-00632 468-00102 632 6300V DESCRIPTION Dill Dome Cap Dill High Temp Dome Cap All Purpose Cap With Screwdriver Top For Removing/ Inserting Valve Cores TR NO. VC3 VC3 VC2 468-00632 SEALING WASHER MATERIAL Nitrile Plastic Nitrile OPERATING PRESSURE 468-00765 OPERATING TEMP RANGE (F) 0-200 PSI -40° To +165°F PACK SIZE FINISH 100 Nickel Plated 100 PSI -40° To +250°F 100 Nickel Plated 0-200 PSI -40° To +165°F 100 Nickel Plated ASCOT NO. 468-06541 468-16541 468-26451 468-36541 468-46541 468-56541 MFG. NO. DESCRIPTION QTY./ BOX 6541N Double Seal Valve Cap 50 6541N Double Seal Valve Cap 250 6541A Double Seal Valve Cap, Nickel, Grooved 6541B Double Seal Valve Cap, Brass 6541N Double Seal Valve Cap, Nickel, Threaded 6541P Double Seal Valve Cap, Chrome Plated 50 or 250 500 50, 250 or 500 500 100 100 100 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE 468-46541 468-26451 468-26541 468-56541 468-36541 468-16541

VALVE HARDWARE 251 PASSENGER CAR EXTENSIONS THE ORIGINAL ALLIGATOR V2B DUAL SEAL CAP • Made in Germany by Alligator • Increased tire life • Lower fuel consumption • Safety for driver and vehicle ASCOT NO. 468-02222 468-12222 MFG. NO. V2B-50 V2B-250 INCREASED TIRE LIFE • Provides a seal against contaminants while extending the valve mouth for convenient access ASCOT NO. MFG. NO. 468-00686 LOWER FUEL CONSUMPTION 468-02222 V2B DESCRIPTION Alligator V2B Dual Seal Cap Alligator V2B Dual Seal Cap QTY./BOX 50 250 TOUGH DOUBLE SEAL CAP • A time, money and labor saving alternative to common valve caps • Reduce pressure check time by 65% • Designed for high pressure truck tire service • Inflate,deflate or gauge directly thru the DS-1 saving time during inflation and pressure checks • Automatic inflation systems lock right onto the DS-1 • Seals like a high pressure cap, yet offers the convenience of an inflate thru extension • Performs like a check valve, the seal becomes tighter in the event of a core failure • Heat resistant grommets provide additional protection for extended high temperature running • Features tough all metal housing, precision fit brass components and durable self-sealing O-Ring ASCOT NO. MFG. NO. 468-04191 DS-1 DESCRIPTION Double Seal Cap ALL-METAL HOUSING DILL TRUCK VALVE EXTENSIONS • Extensions screw onto the standard .305" valve cap threads of the valve stem and make valve mouth accessible for air service • Available in various lengths ASCOT NO. MFG. NO. 468-00330 468-00331 468-00341 468-00346 468-00347 468-00348 468-00349 468-00350 468-00356 468-04191 DS-1 330 331 341 346 347 348 349 350 356 EFFECTIVE LENGTH STRAIGHT METAL EXTENSIONS 4-1/8" 3-1/8" 4-7/16" 1" 3-1/16" 5-1/16" 6-1/16" 2-7/32" 1-13/32" ASCOT NO. MFG. NO. BEND ANGLE BENT METAL EXTENSIONS 468-08028 8028 45° EFFECTIVE LENGTH 1-3/8" 468-00347 468-62411 468-00687 468-00688 468-62410 468-62411 468-62412 468-62413 686-P 687-P 688-P 6241-B 6241-M 6241-J 6241-G FINISH Nylon Nylon Nylon Ni-Plated Brass Ni-Plated Brass Ni-Plated Brass Ni-Plated Brass EFF. LENGTH .75" 1.00" 1.25" .50" .75" 1.25" 1.50" 468-00685 DUAL WHEEL EXTENSIONS • For convenient air service access to inner rear dual wheels • Fit standard valve cap threads and include a clip to secure the extension to the wheel cutout • Can be used on campers, recreational vehicles and light trucks DILL LIGHTWEIGHT TRUCK VALVE EXTENSIONS • Made from nickel plated brass • Provide the additional length necessary to inflate, deflate or gauge tires with valves hidden by decorative wheel covers • Lightweight ASCOT NO. MFG. NO. 468-01032 ASCOT NO. MFG. NO. EFF. LENGTH 468-10017 468-10019 468-10012 468-10010 9059-7 9059-9 9059-12 9059-U 7" 9" 12" 12" 468-10012 468-01033 468-01034 468-01035 468-01037 468-01038 468-01039 1032 1033 1034 1035 1037 1038 1039 COLLAR TYPE Short 3/8" Short 3/8" Short 3/8" Short 3/8" Long 1" Long 1" Long 1" EFF. LENGTH 2" 2.93" 3.93" 5.12" 2.93" 5.12" 6" 468-01038 468-01039 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

252 VALVE HARDWARE Valve Caps, Cores & Extensions (cont.) VALVE ACCESSORIES ASCOT NO. TR. NO. FITS THREAD FOR USES ON HEX NUTS 468-10013 468-10004 468-10117 468-00808 468-10015 468-11700 468-10046 468-10039 468-10054 468-10060 HN-13 HN-17 RW-8 RG-15 G-170S RG-46 RG-39 RG-54 .406"-28 HN-4 .406"-28 .406"-28 .406"-28 GROMMETS .625" .625" .625" .625" .453" O-RING 468-10060 RG-60 .328" TR540 Series TR570 Series TR416 TR509, 510 TV500 & TV570 Series TR570 Series Heat Resistant for TV570 TR509, 510 TR416 TR416 468-10046 DUAL WHEEL FLEXIBLE VALVE EXTENSIONS • Provide easy access to the inner dual tir found on campers, recreational vehicles and light trucks • Fit standard valve cap threads • Come with clamp to secure extension to wheel cutout • 2 extensions per pack and available in steel braided hose ASCOT NO. MFG. NO. 468-30007 468-30010 468-40007 468-40010 468-90597 468-90599 468-95911 9059-7 9059-9 9059-11 DESCRIPTION FE-300-7 FE-300-9 SFE-400-7 Flexible Extension Flexible Extension Steel Braided Extension SFE-400-10 Steel Braided Extension Reinforced Rubber Hose Reinforced Rubber Hose Reinforced Rubber Hose EFF. LENGTH 7" 9" 7" 10" 7" 9" 11" 468-00381 468-00382 468-00383 468-30007 ASCOT NO. MFG. NO. COLLAR TYPE EFF. LENGTH 468-00370 468-00371 468-00372 468-00373 468-00389 468-00390 468-00391 468-00392 468-00393 468-00394 468-00395 468-00396 468-00397 HE-370 HE-371 HE-372 HE-373 HE-389 HE-390 HE-391 HE-392 HE-393 HE-394 HE-395 HE-396 HE-397 HE-381 HE-382 HE-383 Short 3/8" Short 3/8" Short 3/8" Short 3/8" Long 1" Long 1" Long 1" Long 1" Long 1" Long 1" Long 1" Long 1" Long 1" STANDARD STYLE Long 1" Long 1" Long 1" 2" 2-15/16" 3-15/16" 5-1/8" 1-1/16" 2" 2-15/16" 5-1/8" 6" 8" 10" 12" 14" 468-00390 3-1/16" 5-1/16" 6-1/16" 468-10015 HALTEC TRUCK VALVE EXTENSIONS • HE-370 SERIES: Lightweight Extensions have the short collar for use on tube-type valves or tubeless lightweight valves. Has a double seal feature to assure positive seal • HE-390 SERIES: Lightweight Extensions are the same as the HE-370 series except with a long collar • HE-380 SERIES: Standard Style Extensions screw on the standard valve stem (.305"32" cap thread) and make valve mouth accessible • Extensions & stabilizers available for Alcoa wheels 468-00370 468-00382 BLACK POLYMER VALVE EXTENSIONS HALTEC ALUMINUM EXTENSIONS • Extremely lightweight • Made from aluminum ASCOT NO. MFG. NO. 468-01390 468-01391 468-01392 468-01393 COLLAR TYPE HE-390A Long HE-391A Long Long HE-392A Long HE-393A EXTREMELY LIGHTWEIGHT • Light-weight truck extensions are made of a durable, tough plastic able to withstand the conditions tire valve extensions are exposed to • They are designed for use where vibration and weight is a concern for valve stem breakage EFF. LENGTH 2" 2-15/16" 5-1/8" 6" 468-01390 ASCOT NO. MFG. NO. 468-13500 468-13501 468-13510 468-13511 468-13520 468-13521 468-13530 468-13531 HE-350 HE-350D HE-351 HE-351D HE-352 HE-352D HE-353 HE-353D CAP VC-3 DS-1 VC-3 DS-1 VC-3 DS-1 VC-3 DS-1 EFF. LENGTH 2.04" 2.63" 3.82" 4.41" 5.21" 5.80" 5.94" 6.53" 468-13531 468-13530 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 253 Special Application Products HIGH-PRESSURE INFLATING CONNECTIONS • Connections attach securely by hand or wrench to the valve cap threads of high-pressure valves 468-00556 ASCOT NO. MFG. NO. DESCRIPTION 468-00556 H-556 486-06116 Fits .305"-32" Thread Size With 1/8" NPT Male Connection. Has Core Depressor Pin, Copper Sealing Washer. MAX. WORKING PRESSURE: 3000 PSI 468-06116 H-6116B Fits .305"-32" Thread Size With 1/8" NPT Female Connection With 70° Bend. Equipped With Hard Fiber Sealing Washer. MAX. WORKING PRESSURE: 3000 PSI CROSSFIRE DUAL™ TIRE PRESSURE EQUALIZATION SYSTEM HOW CROSSFIRE WORKS: Crossfire is a pressure equalizing and monitoring valve that is mounted between dual tires. It bolts easily to the lug, hub cap, or drive axle end. Properly mounted, air freely flows from one tire to the other, maintaining equal tire pressure and load distribution. • Maximizes tire life • Decreases rolling resistance for increased fuel mileage • Cuts maintenance time due to single-point inflation and the visual pressure gauge • Improves stability, braking and overall safety • Installs in minutes and requires little maintenance • Pays for itself in less than a year • American-made and guaranteed for two years MADE IN THE USA HIGH-PRESSURE SHOCK/STRUT VALVES • Constructed of stainless steel bodies for use in high pressure shock absorber units, hydraulic pressure accumulator, surge cylinders and high pressure pneumatic systems • 1/2"-20 U.N.F. - 3A threads for connection to container 468-07607 468-04361 468-00798 ASCOT NO. MFG. NO. OPERATING PRESSURE 468-07607 468-04361 468-00798 H-7607 H-4361 H-798 2000 PSI 3000 PSI 5000 PSI CONFORMS TO AN-812-1 AN-6287-1 MS-28889-2 TANK VALVES • Use on pressure containers where gauging or service may be required • Used with various gases, fluids and operating pressures 468-00399 ASCOT NO. MFG. NO. 468-00399 468-00400 468-00401 468-00402 TV-399 TV-401 OAL 1-5/16" TV-400 1-5/16" 27/32" TV-402 1-5/16" 468-00400 468-00401 BASE THREAD CAP THREAD HEX SIZE 1/8" NPT 1/4" NPT 1/8" NPT 1/8" NPT .305"-32 .305"-32 .305"-32 .305"-32 7/16" 9/16" 7/16" 7/16" 468-00402 MFG. NO. CF-PSI-RH CF-PSI-HD CF-PSI-ST SS-PSI-RH SS-PSI-ST DESCRIPTION Crossfire Rubber Hoses Crossfire Heavy Duty Hoses Crossfire Stainless Steel Hoses Super Single Rubber Hoses Super Single Steel Hoses Crossfire valves are available for desired air pressures of 50 to 150 PSI in 5 PSI increments. Example: CF-100-ST = Crossfire valve, 100 PSI air pressure, stainless steel hose with AT & BH brackets. Proper-inflation Mounted correctly, Crossfire’s yellow indicator verifies that air is flowing freely from one tire to the other, equalizing the load Under-inflation 20% under-inflation can cause a minimum 30% loss of tire life expectancy Over-inflation 20% over-inflation can cause a minimum 10% loss of tire life expectancy WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

254 VALVE HARDWARE Air/Liquid/Agricultural Valves AIR/LIQUID VALVES FOR TRACTOR AND ROAD GRADER SERVICE 464-00618 ASCOT NO. MFG NO. 464-00618* 464-01618 464-00718 464-00621 464-00622 464-00623 464-00619 464-02618 A TV-618A* TV-618B TV-618RB TV-621A TV-622A TV-623A TV-619A 1-7/8" 1-1/2" 1-7/8" 1-1/2" 1-3/4" 1-1/2" 1-7/8" TV-618A-SS 1-7/8" *TR618A Made in USA available from Dill TRACTOR AND GRADER TUBE VALVE • Valve assemblies with removable core housing for liquid fill • Vulc-on back to allow field repair B — — — 3" 4-1/2" 2-1/4" — BEND ANGLE — — — 65° 90° 65° — 468-00010 VALVE HOLE .625" .625" .625" Rubber .625" .625" .625" .812" .625" 468-00009 ASCOT NO. MFG. NO. DESCRIPTION 468-00202 468-00010 RN-02 LN-10 468-00009 468-00006 B-9A B-6 468-00006 RIM NUTS AND BUSHINGS Rim Hole Reducer Plastic Rim Nut. For Tractor Tube Valves TR-218A, TR-220A Bushing Assembly. Fits Over TR-218A, TR-220A Valves For Use In 13/16" Valve Hole. Includes B9 Bushing and LN-13 Nut Bushing. Fits Over TR-13 Tube Valve When Used in 5/8" Valve Hole RIM HOLE PLUGS 464-00015 VULC-ON BACK 467-00218 CORE ASCOT NO. TR NO. BASE DIAM. 2-1/2" 467-00218 467-00220 467-00916 TR-218A TR-220A 2-1/2" 3-1/4" TR--916A HOUSING TV-CH-3 TV-CH-3 R-372 VERTICAL HEIGHT 1-7/8" 2-15/16" 1-7/8" VALVE HOLE .625" .625" .812" CORE HOUSINGS AIR/LIQUID EXTENSION • Use with tractor or grader valve stems • 90° angle for more accessible valve 468-00201 464-05905 ASCOT NO. MFG. NO. 464-05905 DESCRIPTION TV-5905 Air/Liquid Extension 468-00216 TR-CH-16 90 DEGREE ANGLE ASCOT NO. MFG. NO. 468-00201 468-00203 TV-CH-1 TV-CH-3 468-00203 DESCRIPTION Fits Old Style TR-218, TR220 Valves Fits All Fast Flow Air-Liquid Valves Except Super Large Bore Fits SP816 Tube Spud and T-81, C-100 468-00216 ASCOT NO. MFG. NO. 464-00015 P-15 464-01025 464-00030 N-1012S T-30 464-01025 DESCRIPTION For Tube-Type Wheels. Used to Plug 5/8" Rim Hole and Avoid Tube Pouching Used to Seal 5/8" Rim Hole When Relocating Valve Used to Seal 13/16" Rim Hole When Relocating Valve 464-00030 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 255 VALVE ADAPTER GUN • 1/2" female pipe thread and attaches to any calcium tire filling pump • Extracts valve core from standard bore valve or core housing from tractor valve • Securely holds valve core or core housing up in the gun body during tire filling or evacuation of liquid from a tire LIQUID FILL TOOLS 464-01091 464-01451 464-10912 464-01452 464-10913 SECURE HOLD ASCOT NO. MFG. NO. 464-01091 N-1091 464-10912 464-10913 464-01451 EXTRACTS VALVE CORE 464-01452 N-1452 N-1091-2 N-1091-3 N-1451 DESCRIPTION Water Adapter For Liquid Fill Tires For Water Adapter For Water Adapter 1/2" FNPT Coupler for Fluid Use 1/2" MNPT Nipple for Fluid Use 464-00310 AQUA QUICK FILL ASCOT NO. MFG. NO. DESCRIPTION 464-00310 464-00134 464-00135 464-00136 464-00137 464-00138 464-00139 464-00140 464-00141 464-00142 464-00143 464-00144 464-00145 464-00146 310 FP-134 FP-135 FP-136 FP-137 FP-138 FP-139 Gasket FP-140 FP-141F FP-142 FP-143 FP-144 FP-145 FP-146 Stem Adapter Body Stem Sealing Nut O-Ring For FP-142 Hand Wheel Lock Nut Teflon Gasket 464-10001 ASCOT NO. MFG. NO. DESCRIPTION 464-10001 AQF-1 • To fill a tractor tire or off-the-road tire with liquid without supervision • Automatically vents excess pressure through side port while tire is filled • Indicates tire is filled by water escaping through vent hole Valve Adapter Gun Large Bore Core Remover Adapter For Standard Valve O-Ring For FP-135 Adapter Standard Valve Core Remover Ejector Union VENTS EXCESS PRESSURE Aqua Quick Fill WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

256 VALVE HARDWARE Large Bore Valves SINGLE BEND SWIVEL VALVES 465-00431 ASCOT NO. MFG. NO. 465-00431 K-431 465-00702 DESCRIPTION Clamp-In Type Spud. Grommet increases The Sealing Area. Can Be Removed and Replaced Without Dismounting The Tire. Do Not Use In Continuous Service. Temporary Use Only 465-00702 465-00710 H-41 C-10 TR-SP-2 Tubeless Spud. Fits 13/16" Rim Hole Used With All Large Bore Swivel Valves TR-C-10 Large Bore Screw-In Spud. Screws Into 1/2” NPT Tapped Hole In The Rim. Can Be Replaced Without Dismounting Tire 465-00710 SINGLE BEND SWIVEL VALVES • Any other lengths may be ordered • All valves equipped with core and hex cap • On lengths over 6", 2 lock nuts are furnished valves can be used with any of the spuds on this page ASCOT NO. MFG. NO. 465-01418 N-1418 DOUBLE AND TRIPLE BEND SWIVEL VALVES • These valve stems can be used with any of the spuds above • Any other lengths can be ordered • All valves equipped with core and hex cap • On lengths over 6", 2 lock nuts are furnished Double Bend Swivel Valve 465-00650 WH-300-J-650 465-00653 WH-300-J-653 465-00657 WH-300-J-657 465-30045 WH-300-4-1/2 465-00658 WH-300-J-658 465-03009 465-00446 465-40001 465-00454 465-40002 465-00455 465-40003 465-40004 465-00458 465-40005 465-04510 465-45105 465-04512 465-04513 465-04524 465-40006 WH-300-9 WH-44-6 WH-45-101/2 WH-45-12 WH-45-13 WH-45-24 WH-45-28 Triple Bend Swivel Valve ASCOT NO. 465-00661 465-70255 MFG. NO. WH-70-J661 WH-70-J661-10-1/2 WH-70-J661-28 WH-70-J664 TR NO. BEND ANGLE LENGTH HEIGHT DOUBLE BEND SWIVEL VALVES J-661 — 465-70285 WH-70-J661-25-1/2 465-70280 465-00664 465-70125 465-00667 465-71090 465-72212 465-72280 465-73212 WH-72-J-21-1/4 WH-72-J-28 WH-73-J-21-1/4 465-00662 465-75610 465-00663 465-00665 465-00666 WH-75-J662 WH-75-J662-10-1/2 WH-75-J663 WH-75-J665 WH-75-J666 — — WH-70-J664-12-1/2 WH-70-J667 WH-71-J-9 J-664 — J-667 — — — — 82°-8° 82°-8° 82°-8° 82°-8° 90°-13° 90°-13° 90°-11° 55°-35° 70°-20° 70°-20° 60°-30° TRIPLE BEND SWIVEL VALVES J-662 90°-20°-20°- J-663 90°-8°-8° J-665 90°-13°-13° J-666 4-1/2" 1-5/64" 10-1/2" 1-5/64" 25-1/2" 1-5/64" 28" 1-5/64" 1-5/64" 8-3/4" 12-1/2" 1-5/64" 7-1/2" 1-5/64" 9" 1-33/64" 21-1/4" 1-5/64" 28" 1-5/64" 21-1/4" 1-3/8" 14" 25" 32" 1-5/64" 90°-20°-20° 10-1/2" 1-5/64" 1-5/64" 1-5/64" 84°-6°-31°-31° 20-1/8" 1-5/64" WH-45-30 WH-45-32 WH-45-36 465-00650 TR NO. BEND ANGLE LENGTH HEIGHT 1-3/4" - J-650 J-653 J-657 - J-658 - - WH-45-2-1/2 J-4000-2-1/2 WH-45-4 - WH-45-4-1/2 J-4000-4-1/2 WH-45-5 WH-45-6 - J-4000-6 WH-45-7-1/2 J-4000-7-1/2 WH-45-8 WH-45-9 WH-45-10 - J-4000-9 - - - - - J-4000-28 465-40007 WH-45-29-1/2 J-4000-29-1/2 465-04530 465-04532 465-04536 465-00651 465-04645 465-00652 465-04745 465-00479 465-00655 - - - WH-46-J-651 WH-46-4-1/2 WH-47-J-652 WH-47-4-1/2 WH-47-9 WH-48-J-655 465-00654 WH-49-J-654 465-00659 WH-50-J-659 465-00660 WH-50-J-660 465-00506 465-00507 465-00668 465-00522 465-00535 465-00546 465-00552 465-00558 465-00563 465-00573 465-00582 WH-50-6 WH-50-7-1/2 WH-51-J-668 WH-52-2 WH-53-5-1/2 WH-54-6 WH-55-2-1/2 WH-55-8-1/2 WH-56-3 WH-57-3 WH-58-2-1/2 465-00656 WH-59-J-656 J-651 - J-652 - - J-655 J-654 J-659 J-660 - - J-668 - - - - - - - - J-656 74˚ 80° 80° 80° 80° 80° 80° Strt. 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 86° 86° 86° 74° 60° 90° 90° 90° 90° 90° 25° 80° 90° 90° 90° 65° 80° 60° 90° 4" 1-5/64" 3-1/8" 1-5/64" 2-1/2" 1-5/64" 1-5/64" 4-1/2" 1-5/64" 5-1/2" 1-5/64" 1-5/64" 1-5/64" 9" 6" 2-1/2" 1-5/64" 1-5/64" 4" 4-1/2" 1-5/64" 1-5/64" 1-5/64" 5" 6" 7-1/2" 1-5/64" 1-5/64" 1-5/64" 1-5/64" 8" 9" 10" 10-1/2" 1-5/64" 1-5/64" 1-5/64" 1-5/64" 1-5/64" 12" 13" 24" 28" 29-1/2" 1-5/64" 1-5/64" 1-5/64" 1-5/64" 30" 32" 36" 4-11/16" 1-17/64" 4-1/2" 1-17/64" 5-1/2" 1-5/64" 4-1/2" 1-5/64" 1-5/64" 9" 3-1/8" 1-5/64" 3-1/8" 1-5/64" 3-1/2" 1-57/64" 8-3/4" 6" 1-57/64" 1-57/64" 7-1/2" 1-57/64 4-11/16" 5-1/8" 1-5/64" 2" 5-1/2" 1-21/64" 2-25/64" 2-25/64" 2-25/64" 1-5/64" 1-5/64" 6" 2-1/2" 8-1/2" 3" 3" 2-1/2" 2-1/8" 3-11/16" 2-5/8" BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 257 SPECIAL HYDROFLATING VALVES • For faster filling of tires with liquid • Does not contain valve core • Straight-through 5/16" opening sealed with special O-ring cap, No. A-151 • Used on loader tire in conjunction with similar large bore air valve LARGE RADIUS, HIGH-BEND AIR/LIQUID VALVE • Uses super large bore T-81 spud (TR-SP-8) • Uses A-151 cap AIR WATER VALVES 465-97755 • Used in conjunction with WH-330-J-694 large bore valve ASCOT NO. 465-00994 MFG. NO. TR NO. WH-JF-994 JF-994 465-00994 ANGLE BEND 28° HORIZONTAL LENGTH 3.5" (88.9mm) ASCOT NO. 465-97755 CAP A-151 465-97711 977S-11 90° MFG. NO. 977S-5-1/2 BEND 90° LENGTH 5-1/2" (139.7mm) 11" (279.4mm) 2" (50.8mm) HEIGHT 2" (50.8mm) TURRET VALVE FOR PLANETARY GEAR WHEELS 465-00690 VALVE ADAPTERS 468-00100 ASCOT NO. MFG. NO. 468-00100 AD-1 465-00691 468-08007 ASCOT NO. 465-00690 465-00691 465-06911 465-00692 465-00693 465-00694 465-00695 465-00696 MFG. NO. TR NO. ANGLE BEND WH-330-J-690 J-690 2 Bends WH-330-J-691 J-691 WH-330-J-691B J-691 WH-330-J-692 J-692 18° 18° 28° WH-330-J-693 J-693 60° WH-330-J-694 J-694 28° WH-330-J-695 J-695 WH-330-J-696 J-696 50° 42° OFFSET INCHES LENGTH 9/16" - - 9/16" 1" - 1" 29/32" 4-11/16" 3-5/16" 8-1/2" 4-11/16" 5" 3-1/2" 4-1/8" 4-1/4" 465-00145 LARGE BORE CAPS AND CORES 8807N-4 DESCRIPTION Adapts Large Bore Valve Down To Standard Valve Bore. Fits. 305-32" Valve Core Threads Adapts Large Bore Valve Down To Standard Valve Bore. Fits .485-26" Valve Cap Threads 468-08007 LARGE RADIUS, HIGH-BEND AIR-VALVE USED WITH 977S • All valves fit 13/16" valve hole • INCLUDES: A-145 valve core and A-149 cap 465-11455 ASCOT NO. MFG. NO. 465-11455 465-11411 114S-11 114S-5-1/2 90° 90° 5-1/2" (139.7mm) 11" (279.4mm) 2" (50.8mm) 2" (50.8mm) 465-00148 ASCOT NO. MFG. NO. 465-00145 465-00144 465-00148 465-00149 468-00151 A-145 A-144 A-148 A-149 A-151 465-00149 DESCRIPTION Large Bore Core (Short). Fits 305-32" Threads Large Bore Core (Long). Fits .305-32" Threads Screwdriver Valve Cap. Fits .482-26" Threads Hex Valve Cap. Fits .482-26" Threads Air-Water Valve Cap (TR-FC-1). O-Ring Sealing Cap. Used With 465-00994, 465-97755, 465-97711 465-00151 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

258 VALVE HARDWARE Large Bore Valves (cont.) MISCELLANEOUS VALVES STANDARD O-RINGS FOR TUBELESS RIMS • Made of high quality polysoprene rubber • Packaged 2 per poly bag, 24 O-rings per case • Manufactured to major OEM specifications • Arctic style O-ring available (Marked with green ink) HIGH QUALITY 465-00670 465-00671 POLYSOPRENE RUBBER 465-00702 465-06702 465-06703 ASCOT NO. MFG. NO. TR NUMBER 465-00670 T-670 465-00671 465-00702 465-06702 465-06703 H-47 H-41 H-42 H-45 — TR-J-671 SP-2 TR-J-670-2 TR-J-670-3 DESCRIPTION Loader Tire Valve. Complete With Core, Hex Cap & O-Ring Seal. Thread Size: 1-1/16-12. Height: 1-25/32" Tank Valve. Screw-In Type With 1/4" Male Pipe Thread. Complete With Core and Cap. 1-19/32" Length Tubeless Spud. Used With All Large Bore Swivel Valves. Fits 13/16" Rim Hole Straight Valve. Equipped With Core and Hex Cap. Height Is 1-1/2" Spud and Valve Complete. Consists Of H-41 & H-42. Height Is 1-5/8" ASCOT NO. 471-80001 471-80002 471-80003 471-80004 471-80005 471-80006 471-80007 471-80008 471-80009 471-80010 471-80011 471-80012 471-80014 471-80015 471-80016 471-80017 471-80018 471-80019 471-80020 471-80021 471-80022 471-80023 471-80024 471-80025 471-80215 471-80225 471-80449 471-80451 471-80457 471-80463 471-80469 OR-20-JM OR-22-JM OR-24-JM OR-21-T OR-217-L OR-220-TG OR-224-TG OR-25-T OR-321-T OR-325-T OR-329-T OR-333-T OR-335-T OR-339-T OR-343-T OR-345-T OR-349-T OR-351-T OR-357-T OR-451-T OR-457-T OR-463T OR-232-T OR-239-T OR-215-H OR-225-T OR-449-T OR-451-OVM OR-457-OVM OR-463-OVM OR-469T ROD DIAM. 0.26" 0.26" 0.26" 0.26" 0.28" 0.26" 0.26" 0.26" 0.385" 0.385" 0.385" 0.385" 0.385" 0.385" 0.385" 0.385" 0.385" 0.385" 0.385" 0.50" 0.50" 0.50" 0.26" 0.26" 0.28" 0.26" 0.50" 0.50" 0.50" 0.50" 0.50" Grader 17" Grader 20" Grader 24" EM 25" EM 21" EM 25" EM 29" EM 33" EM 35" EM 39" EM 43" EM 45" EM 49" EM 51" EM 57" EM 51" EM 57" EM 63" EM 32" EM 39" Grader 15" Grader 25" EM 49" OVM 51" Titan OVM 57" OVM 63" EM 69" MFG. NO. SIZE Hwy (JM Rim) 20" Hwy (JM Rim) 22" Hwy (JM Rim) 24" Hwy 21" BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 259 LARGE BORE SCREW-ON REPAIR VALVE ADAPTERS FOR INNER TUBES L-RINGS FOR EARTHMOVERS • Creates an air seal where the tire bead and rim seat are not completely compatible • Not a cure for damaged beads nor damaged wheels and rims! • CAUTION: Should be used during fitments, do not install where a broken bead is suspected ASCOT NO. MFG. NO. 471-80112 471-80115 471-80116 471-80120 471-80125 471-80129 471-80133 471-80135 471-80139 471-80145 471-80149 471-80151 471-80157 471-80163 471-80169 LR-12 LR-15 LR-16 LR-20 LR-25 LR-29 LR-33 LR-35 LR-39 LR-45 LR-49 LR-51 LR-57 LR-63 LR-69 SIZE 12" 15" 16" 20" 25" 29" 33" 35" 39" 45" 49" 51" 57" 63" 69" 465-40000 ASCOT NO. MFG. NO. 465-40000 H-4000 465-40011 DESCRIPTION Adapter Converts Tubes having SP-1000 Type Spud To Accept Large Bore Swivel Valves. Equipped With BW-18 Washer and Used With Rim Slots H-4000-1 Same As H-4000 Except Without Bridge Washer and Hex Nut CLAMP-IN RIM SPUD • Fits 13/16" diameter valve hole • Can attach to any super large bore valve to the rim through a standard valve hole (13/16" diameter) 464-00208 ASCOT NO. MFG. NO. TR NUMBER 464-00208 464-00082 T-81 T-82 TR-SP8 — DESCRIPTION Clamp-In Rim Spud T-82 Clamp-In Rim Spud - 1/4" longer effective length SCREW-IN RIM SPUDS • Used to attach any of the super large bore valves to the rim and is designed to screw into a 1/2" NPT tapped rim hole • Can be changed without dismounting the tire LARGE BORE SCREW-ON REPAIR VALVES FOR INNER TUBES • Supplied in straight or bent form ready for installation on tubes • Equipped with A-146 valve coer and A-149 hex cap • Used with SP-1000 tube spud 464-00209 465-10781 ASCOT NO. MFG. NO. 464-00209 C-100 DESCRIPTION Effective Length 1/4" Longer SCREW-IN RIM SPUDS • 85° bend angle ASCOT NO. MFG. NO. TR NUMBER 465-01014 465-10760 465-10761 465-10762 465-10763 465-10764 465-11750 465-11751 465-11752 465-10780 465-10781 465-10782 465-11790 465-11791 465-11792 LB-216 LB-217 LB-218 LB-219 J-1014 LB-220 J-1076D LB-221 J-1076E J-1078B LB-228 J-1078C J-1179C A-ANGLE BEND Straight J-1076A Straight J-1076B J-1076C 86° 90° 90° 88° LB-223 J-1175A Straight LB-224 J-1175B LB-225 J-1175C 82° 88° LB-226 J-1078A Straight LB-227 82° 90° LB-229 J-1179A Straight LB-230 J-1179B LB-231 88° 86° B-VERTICAL HEIGHT 1-29/32" 4-5/32" 1-1/8" 1-1/2" 2-1/16" 1-3/8" 5-9/32" 1-1/4" 1-3/8" 5-25/32" 1-3/8" 1-1/8" 6-13/32" 1-3/8" 1-1/8" C-HORIZONTAL LENGTH - - 3-1/4" 2-7/8" 2-5/16" 3" - 4-1/4" 4-1/8" - 4-5/8" 4-7/8" - 5-1/4" 5-1/2" ASCOT NO. MFG. NO. TR NO. 466-00918 R-520 TR-CH-8 DESCRIPTION Core Housing 466-00918 CORE HOUSING • Complete with core and cap • Designated at Tire and Rim as the CH-8 • Integral part of the system as the CH-8 is removed from the valve assembly with the IN-80A adapter to utilize the larger opening and the fullest flow of the 6185 check valve ASCOT NO. MFG. NO. 466-00850 466-00851 S-85 S-85-D DESCRIPTION 466-00850 Fits 1/2" NPT Tapped Rim Hole Furnished With A Locking Nut With A Teflon Seal So Direction Can Be Reversed 466-00851 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

260 VALVE HARDWARE Large Bore Valves (cont.) CHECK VALVE • Complete with cap • Permits rapid inflation and deflation • Eliminates need for core housing and inflation adapter • Used with 6190 air chuck ASCOT NO. MFG. NO. TR NO. 466-00860 6185 DESCRIPTION TR-L-860 Check Valve 466-00860 QUICK CONNECTION INFLATION CHUCK • Designed specifically for use with 6185 check valve • Sliding sleeve locks air chuck onto check valve and permits unrestricted air flow • Gauging can be done through valve on chuck • Positive air line shut off-valve must be installed in back of air chuck 466-06190 SUPER LARGE BORE INFLATOR ADAP • New, safer alternative to IN-80A • Left hand threads on union body — will not come loose when screwing on t valve • New non-removable stem guide • 3/4" pipe thr for easy air hose connection • During inflation, air pressure in the tire can be checked through the stem knob with a tire pressure gauge • Will insert or extract CH-8 or CH-9 core housing • Pressure can be checked without disconnecting with a Large Bore Gauge • 1-piece stainless steel stem and collet • Reduces inflation time 60%, deflation time 80% • The core housing is held in a stainless steel e by a snap ring • Extractor is rugged enough so that the core housing can be loosened or tightened without being damaged • THE IN-100 INFLATOR ADAPTER SAVES TIME BY FAST INFLATION OR DEFLATION ON A TIRE: Aft removing the valve cap, the inflator is screwed onto the valve stem. The inflator stem is pushed in to engage the flats on the core housing. By rotating the stem counter clockwise, the core housing can be removed without any danger to the person removing it. The core housing is pulled up into the inflator body and held there during inflation or deflation. Can also be used for liquid-filling tires equipped with Super Large Bore valves. ASCOT NO. MFG. NO. DESCRIPTION 466-06190 6190 FAST Quick Connection Inflation Chuck SWIVEL ANGLE CONNECTORS • Component two of the super large bore system is generally a swivel connector that screws onto the spud • Connectors of various angles and lengths are available • Other end of the connector accommodates a MT-3000 flexible extension which attaches to the R-520 core housing of the 6185 check valve SLB-55L MB-55-3 NO THREAD LOCK IN-100-2 IN-100-1 IN-100-4B 568-207 H-47 464 INFLATION OR DEFLATION 466-05311 PARTS LIST: 466-00525 SLB-55L Ejector Union MB-55-3 Gasket for G-201 IN-100-1 Adapter Body IN-100-2 Stem and Collet G-206 Gasket for Stem Nut 466-00675 PARTS INCLUDEDIN-100A PARTS LISTPARTS INCLUDED ASCOT NO. MFG. NO. 466-00525 466-00685 466-00625 466-00675 466-00660 466-00529 R-525 R-685 R-625 R-675 R-660 R-529-5-1/4 BEND ANGLE 90° 85° 80° 75° 60° 90° E-3100-2A Connector Sleeve IN-100-1A Body for IN-100 IN-100-3A Nut for Connector Sleeve 10218 O-Ring G-202 Teflon Washer ASCOT NO. MFG. NO. 466-05311 IN-100A DESCRIPTION Super Large Bore Inflator Adapter E-3100-12 Hand Knob E-3100-1A Stem and Collet 464 Lock nut A-147 E-3100-10 Stem Sealing Nut 568-207 O-Ring for G-207 IN-100-4B Hand Knob 464 Lock Nut A-147 Dome Cap BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 261 FLEXIBLE EXTENSION SERIES RIGID METAL SWIVEL VALVES • Flexible extensions are made up in any length to allow the extension to fit the wheel configuration • Specially designed fittings and thermoplastic hose will not fatigue or crush during service • Corrosion problems are eliminated • Able to customize your extension in the field • The R-969-K and R-969K-1 kits are available to field assemble your own flexible extensions with the T-620 assembly tool (not shown) 466-00200 MADE UP IN ANY LENGTH 466-00800 CORROSION PROBLEMS ELIMINATED 466-03000 466-00890 ASCOT NO. MFG. NO. 466-03000 DESCRIPTION MT-3000 Flexible Extension ASSEMBLY KIT FOR SUPER LARGE BORE VALVES-FIELD SERVICE 466-01850 Custom Valve 466-96901 ASCOT NO. MFG. NO. 466-00200 M-2000 ASCOT NO. MFG. NO. 466-96901 466-96900 466-76000 DESCRIPTION R-969K-1 R-969-K R-760 Consists Of R-762S Swivel Connector, R-763 Straight Tubing Connector, R-764R (2) Tubing Connector Sleeves and B-222 Nuts (2) Consists Of The Above Plus The R-520 Core Housing Complete With Core and Cap Extension Tubing Available In 50' and 100' Lengths 466-00800 MR-800 466-00890 466-01850 MR-890 MR-850 Swivel Valve Assembly. 90° Swivel Valve - 3-1/8” Horizontal Length Swivel Valve: MR-800-Length. Rigid Metal Swivel Valve With R-520 Core Housing And 2B-222 Lock Nuts Turret Valve: MR-890. Rigid Metal Turret Type Valve With R-520 Core Housing & (3)B-222 Lock Nuts Swivel Valve: MR-850. Same As MR800 Except With A T-81 Rim Spud DESCRIPTION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

262 VALVE HARDWARE Large Bore Valves (cont.) SUPER LARGE BORE VALVES 466-00296 SUPER LARGE BORE VALVES 466-04000 466-01066 466-01870 466-07910 ASCOT NO. MFG. NO. 466-00296 DS-296 DESCRIPTION Super Large Bore Double Spud Valve Assembly (with Flexible Extension). Designed For Use Where Above Rim Is 7/8". Consists Of DS-210 Double Spud, DS-215 Plug And MT-4000 Flexible Extension 466-04000 466-07910 466-08860 MT-4000 S-7910 S-8860 Flexible Extension. Used With DS-296 And PB-210. Consists Of: DS-226 Connector, R-763 Connector, (2) R-764R Sleeves, R-760 Tubing Valve Support For Super Large Bore Valve Support For Large Bore SUPER LARGE BORE AIR/LIQUID VALVES FOR TRACTOR AND GRADER SUPER LARGE BORE TURRET VALVES • Long super large bore turret valve with 15° bend • Used on Caterpillar applications SUPER LARGE BORE TURRET ASCOT NO. MFG. NO. 466-01066 N-1066 DESCRIPTION Super Large Bore Loader Valve. Accepts R-520 Core Housing Or Other Super Large Bore Swivel Fittings. Thread Size is 1-1/16"12. Super Large Bore Version Of T-670 466-05000 M-5000 Straight Valve Assembly. Screw-In Type Spud With O-Ring Seal. R-521 Core Housings Not Interchangeable In Other SLB Spuds. Thread Size Is 3/4-16" 466-01870 466-01050 M-1870 N-1050 Straight Valve Assembly. Super Large Bore Straight Valve Assembly Consists of R-520 Core Housing And T-81 Spud Same as M-1870 but with T-82 Spud 466-01538 464-00216 466-01543 ASCOT NO. MFG. NO. 466-01533 JD-3 466-01538 466-01543 N-1538B N-1543A DESCRIPTION 6-1/8" Long Super Large Bore Turret - 12° Bend Angle 7-7/8" Long Super Large Bore Turret 6-1/8" Long Super Large Bore Turret ASCOT NO. MFG. NO. 464-00208 464-00216 466-50910 T-81 R-372 H-50 DESCRIPTION Fits 13/16” Dia. Rim Holes Fits T-81, C-100, TRSP 816 Tube Spuds Components T-81 Spud And R-372 Core Housing 464-00208 466-50910 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 263 Large Bore Extensions HAND BENDABLE LARGE BORE EXTENSIONS • Equipped with 2 lock nuts and 3/4" hex sealing nut • Teflon gasket seals on end of valve; the lead seal in the sealing nut is forced into the threads for a second seal, locking extension to valve • Cap and core not included • Should be removed from valve and transferred to extension RIGID BRASS LARGE BORE EXTENSIONS • All-brass extensions used when mounted in straight line with valve • Full length deflector pin opens core in valve when servicing • Equipped with hex cap, 2 lock nuts on extensions over 5" in length ASCOT NO. 465-86032 ASCOT NO. 465-75035 465-75040 465-75045 465-75080 465-75090 465-75010 465-75115 465-75120 465-75135 465-75160 465-75170 465-75175 465-75180 465-75185 465-75190 465-75205 465-75210 465-75215 465-75225 465-75235 465-75245 465-75250 465-75295 465-75320 MFG. NO. 753S-3-1/2 753S-4 753S-4-1/2 753S-8 753S-9 753S-10 753S-11-1/2 753S-12 753S-13-1/2 753S-16 753S-17 753S-17-1/2 753S-18 753S-18-1/2 753S-19 753S-20-1/2 753S-21 753S-21-1/2 753S-22-1/2 753S-23-1/2 753S-24-1/2 753S-25 753S-29-1/2 753S-32 EFFECTIVE LENGTH 3-1/2" 4" 4-1/2" 8" 9" 10" 11-1/2" 12" 13-1/2" 16" 17" 17-1/2" 18" 18-1/2" 19" 20-1/2" 21" 21-1/2" 22-1/2" 23-1/2" 24-1/2" 25" 29-1/2" 32" 465-75035 CUSTOM BENT SWIVEL VALVES AND EXTENSIONS ASCOT NO. MFG. NO. OVERALL LENGTH FLEXIBLE LARGE BORE EXTENSIONS • Made with tough rubber hose and reusable hydraulic type fittings • Equipped with 2 lock nuts and 3/4" hex sealing nut • A Teflon gasket seals on end of valve • The lead seal in the sealing nut is forced into the threads for a second seal, positively locking extension to valve ASCOT NO. 465-81080 465-81090 465-81100 465-81200 465-81250 465-81320 465-81400 MFG. NO. 810F-8 810F-9 810F-10 810F-20-1/2" 810F-25 810F-32 810F-40 EFFECTIVE LENGTH 8" 9" 10" 20-1/2" 25" 32" 40" 465-00570 WHG-0570VC 19-31/32" 465-00585 WHD-0585EC 17-15/16" 465-01450 WHG-1450VC 32-7/8" 465-04985 WHG-4985VC 19-3/4" 465-05008 WHD-5008EC 17-13/16" 465-05112 WHG-5112VC 28-3/8" 465-05200 WHG-5200VC 27" 465-05410 WHG-5410VC 31-9/16" 465-05420 WHG-5420VC 33" 465-05922 WHD-5922EC 15-1/4" 465-07103 WHD-7103EC 16-1/4" 465-07601 WHD-7601EC 16-3/4" 465-07602 WHD-7602EC 14-1/4" 465-07940 WHD-7940EC 19" 465-07948 WHD-7948EC 20-5/8" 465-07949 WHD-7949EC 28-7/8" 465-08018 WHG-8018VC 26-3/4" 465-08019 WHG-8019VC 8" 465-08852 WHG-8852VC 18-9/16" 465-09440 WHG-9440VC 27" 465-81090 465-09470 WHG-9470VC 31-1/2" 465-09903 WHD-9903EC 16-7/8" NO. OF BENDS TYPE 5 4 5 4 4 4 5 5 5 5 4 4 4 5 4 4 4 1 4 5 5 4 Valve Extension Valve Valve Extension Valve Valve Valve Valve Extension Extension Extension Extension Extension Extension Extension Valve Valve Valve Valve Valve Extension 465-86015 465-86020 465-86025 465-86030 465-86033 465-86040 465-86045 465-86050 465-86059 465-86060 465-86067 465-86072 465-86077 465-86080 465-86085 465-86090 465-86100 465-86107 465-86120 465-86125 465-86160 465-86187 465-86225 465-86245 MFG. NO. 867- 1-1/4 867- 1-1/2 867- 2 867- 2-1/2 867- 3 867- 3-3/8 867- 4 867- 4-1/2 867- 5 867- 5-9/16 867- 6 867- 6-7/8 867- 7-1/4 867- 7-3/4 867-8 867- 8-1/2 867-9 867-10 867- 10-3/4 867-12 867- 12-1/2 867- 16 867- 18-7/8 867- 22-1/2 867- 24-1/2 EFFECTIVE LENGTH 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-3/8" 4" 4-1/2" 5" 5-9/16" 6" 6-7/8" 7-1/4" 7-3/4" 8" 8-1/2" 9" 10" 10-3/4" 12" 12-1/2" 16" 18-7/8" 22-1/2" 24-1/2" 465-86060 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

264 VALVE HARDWARE Z-Bore Valve System There are three spud types available: the standard clamp-in spud, a screw-in spud and an angle screw-in spud. There is no temporary outside-in clamp-in spud for Z-Bore. The Z-Bore Valve System is very similar to the Super Large Bore System. By using an O-Ring to seal the clamp-in spud to the rim, a greater flow diameter is created without sacrificing strength or performance. Flows 370 CFM compared to 240 CFM on the Z-Bore Valve System. Z-1 SCREW-IN SPUD • The screw-in spud is used to attach any Z-Bore valves to the rim • Designed to screw into a 1/2" NPT-tapped rim hole • Can be changed without demounting the tire ASCOT NO. MFG. NO. DESCRIPTION 466-70001 Z-1 466-70001 Screw-In Spud Z-13 SCREW-IN SPUD • The Z-13 screw-In spud screws into the 3/4" NPT-tapped rim hole and converts Mega Bore to Z-Bore ASCOT NO. MFG. NO. 466-70013 Z-13 DESCRIPTION Screw-In Spud 466-70013 ANGLE CONNECTOR • Connectors of various angles and lengths are available • The connector accommodates a flexible extension which attaches to the Z-10 core housing ASCOT NO. MFG. NO. DESCRIPTION 469-70360 466-70375 466-70380 466-70390 Z3-60 Z3-75 Z3-80 Z3-90 60° Angle 75˚ Angle 80˚ Angle 90˚ Angle 466-70390 Z-BORE FLEXIBLE EXTENSIONS • Made up in any length to allow extension to fit the wheel configuration • Specially designed fittings and thermoplastic hose will not fatigue or crush during service • Corrosion problems are eliminated • Able to customize extension in the field • ZFAK field assembly kit available to assemble your own ASCOT NO. MFG. NO. 466-70700 ZBFELength 466-70701 ZFAK DESCRIPTION Flexible Extension Assembly Kit For Z-Bore Valves. INCLUDES: Contains Z-8 Swivel Connector, Z-7 Straight Tubing Connector, 2x Z2-2 Nuts, 2x Z-9 Tubing Connector Sleeves, Z-10 Core Housing. Z-100 Tubing Is Ordered Separately Z-10 CORE HOUSING • Complete with core and cap • Integral part of the system as the Z-10 is removed from the valve assembly with the Haltec Z-12B inflator to utilize the larger opening and the fullest flow ASCOT NO. MFG. NO. DESCRIPTION 466-70010 Z-10 Z-12L INFLATOR • To maximize air flow, a Z-12B inflator is used to remove core housing during inflation and deflation • Operates like the IN-100A Super Large Bore inflator Core Housing w/Core & Cap 466-70010 ASCOT NO. MFG. NO. 466-70012 Z-12L DESCRIPTION Inflator 466-70012 Z-4 ANGLE SCREW-IN SPUD • Fits 1/2" NPT-tapped rim hole • 85˚ bend angle ASCOT NO. MFG. NO. DESCRIPTION 466-70004 Z-4 Z-2 CLAMP-IN SPUD • Can attach any Z-Bore valve to the rim through a standard valve hole (13/16") • Fits a 13/16" diameter valve hole • Tire must be dismounted to change spud ASCOT NO. MFG. NO. 466-70002 Z-2 DESCRIPTION Clamp-In Spud 466-70002 Angle Screw-In Spud 466-70004 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 265 PT Valve System The best way to insure maximum tire life is through proper tire inflation. Using a PT valve and gauge assembly, tire pressure monitoring has never been easier. Use the proper PT gauge for daily checks and a separate master gauge for weekly checks which will prevent air loss before it can cause permanent tire damage. The PT valve and gauge can be used on most Large Bore and Super Large Bore applications. PT VALVES • Designed with troublefree, urethane O-rings on the valve barrel • Other valves and sizes available • Assemble the valve to the tire and wheel assembly before installing the PT gauge to the PT valve ASCOT NO. MFG. NO. 465-00042 465-00456 465-00520 465-00524 465-07536 465-30060 465-33031 465-33069 PT-EX PT-753S-6 DESCRIPTION PT-H-42 PT-45-6 PT-R-520 H-42 With PT Grooves & O-Rings WH-45-6 With PT Grooves & O-Rings R-520 With PT Grooves & O-Rings For Super Large Bore Large Bore Extension w/1-5/8” Effective length to allow PT Gauge installation on existing valves 753S-6 With PT Grooves & O-Rings PT-300-J-650 WH-300-J-650 With PT Grooves & O-Rings PT-330-3-1/2 PT-330-J-690 WH-330-J-690 With PT Grooves & O-Rings PT GAUGES • Easy-to-read dial gauge attaches to the valve • Includes gauge and nut • Calibrated 0-160 PSI • Has an all-anodized aluminum body and is totally sealed to prevent moisture from fogging the glow-in-the-dark dial 468-00101 ASCOT NO. MFG. NO. 468-00101 DESCRIPTION PT Gauge Digital Passenger Gauge PTC BLOCK-OFF COLLAR • For PT valves when gauge is not attached • Can be installed to prevent air leakage ASCOT NO. MFG. NO. 468-00580 PTC DESCRIPTION 5/8" Hex VALVE CAP • Valve cap used on PT-style valves • 5/8" hex ASCOT NO. MFG. NO. 468-00150 A-150 DESCRIPTION Valve Cap 468-00150 469-00010 468-00580 469-08909 469-08910 469-06950 TL-695 469-01810 469-01910 469-06900 N-1810 N-1910 TL-690 Turret Style Valve With 3-1/2” Effective Length 469-00680 469-01610 469-01710 TL-680 N-1610 N-1710 ASCOT NO. MFG. NO. DESCRIPTION 469-00010 ASP-10 469-00631 TL-631 Tube Deflation Aspirator. For Large Bore Super Large Bore Rethreading Tool. Used To Rethread 11/16-24" Thread On Any Super Large Bore Valve Three-Way Large Bore Tool. For Removing Large Bore Cor Hex Caps And Screwdriver Caps Large Bore Core Tool Large Bore Core Tool. Valve Core Screwdriver Tool. Sliding Sleeve Allows Positive Grip On Valve Core For Hard To Reach Valves Large Bore Hex Cap Remover. Plastic Handle For Positive Grip. 10” OAL Large Bore Core Remover. Plastic Handle For Positive Grip. 5 - 6" OAL Four-Way Large Bore Core Tool. Thread Repair For Core And Cap Threads And Core Remover For Large Bore And Super Large Bore Four-Way Tool. Repairs Internal And External Threads On Air/Liquid Spuds. Also Large Bore Valve Core Insertion Tool 8909-C Large Bore Valve Fishing Tool 8910 TPMS Valve Fishing Tool. Secures TPMS sensor to wheel during demount. One handle end can be used as a deflator, the other as a core remover. 3" OAL 469-08909 9-08910 465-00456 465-00520 465-33031 PT VALVE TOOL • Tightens nut to hold PT gauge on valve assembly • Also tightens A-150 cap and PTC collar ASCOT NO. MFG. NO. 468-00634 TL-634 DESCRIPTION PT Valve Tool LARGE BORE VALVE TOOLS 468-00634 469-00690 469-00680 469-06950 469-01610 469-01710 469-01810 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

266 VALVE HARDWARE Valve Hardware Tools VAL AND REMO STAND VALVE T 469-00612 469-00014 469-00040 469-00992 469-00633 469-01124 469-03333 ASCOT NO. MFG. NO. 469-00014 469-00040 469-00992 VT-014 469-01124 469-03333 VT-1124 VT-03P DESCRIPTION Valve Installation Tool with Rubber Block 00040R Valve Stem Puller with Rubber Boot 992 Tubeless Tire And Tire Valve Inserting And Removing Tool. For All Sizes Of Snap-In Passenger Car Tire Valves Tubeless Tire Valve Service Tool. Pull-AStem Tool Pulls Old Valves Or Inserts New Valves. Tool Fits All Sizes Or Lengths Plastic Valve Puller with Metal Rod Insert 469-00633 VALVE CORE INSERTION AND REMOVAL TOOLS SUR-LOCK VALVE TOOLS 469-00001 ASCOT NO. 469-00001 469-00003 469-00005 469-00607 469-01638 469-00005 MFG. NO. DESCRIPTION CT-1 CT-3 CT-5 607 1638A 469-00607 469-01638 • Special design allows the valve core to stay attached to the tool after it is removed from the valve • Great tool to keep the valve core from getting dropped or lost Pocket-Size Valve Core Remover Heavy Duty Standard Valve Core Remover For Both Standard and Large Bore Valves Has Plastic Screwdriver Handle For Better Grip And Leverage Heavy Duty Professional Plastic Valve Puller. Steel Tube Reinforced Handle Provides Extreme Rigidity. Safety Orange Color For Easy Visibility. Protects Wheels From Damage During Installation/Removal Of Snap-In Valve Stems 469-15407 15407 Angled Tubeless Tire Valve Inserting And Removing Tool 469-00132 469-00133 469-00134 ASCOT NO. MFG. NO. DESCRIPTION 469-00131 469-00132 469-00133 469-00134 TL-131 TL-132 TL-133 TL-134 For Bicycles For Cars. 1-3/4" Length For Trucks. 8-1/4" Length For Large Bore Cores. 10-1/2" Length TL-633 ASCOT NO. 469-00612 469-00625 469-00630 469-00632 MFG. NO. DESCRIPTION TL-612 TL-625 TL-630 TL-632 Standard Bore Core Tool. With An Overall Length Of 8" And Oversized Handle Standard Bore Core Tool. With Recessed Probe. Fits In Pocket Hex Nut Driver. For 500 Series Truck. For Tubeless Clamp-In Metal Valves. For All Lengths of Tubeless Truck Valves Truck Extension Service Tool. Tightens Both Metric European And Domestic Type Extensions. Broached To Engage The Metric Hex At The Extension Top and Will Reach The Hex On A 7" U.S.A. Type Extension Valve Cap Tool. Easy To Remove And Install Valve. Caps On Inside Dual Wheels. For Aluminum Wheels 469-01440 469-00632 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 267 VALVE AND CORE TOOLS ASCOT NO. MFG. NO. 469-00002 CT-2 469-00002 DESCRIPTION Black Heat Treated Heavy Duty Tire Valve Repair Tool. 4-in-1 Standard Valve Tool Repairs Cap Threads, Repairs Core Threads. Easy-Out Feature For Removing Damaged Cores & Removing Standard Caps 469-00012 469-00004 469-00011 469-00018 469-00020 469-00021 469-00081 469-00567 469-00609 469-01115 469-05262 CT-2E CT-4 VT-11 VSW18 VSW20 VT-21 TVT-81 567A TL-609 VT-1115 5262 Economy 4-Way Valve Core Tool (Black) Economy Standard Bore 4-Way Tool Cable Valve Fishing Tool. Valve Core Wrench And Deflating Pin With Flexible Cable For Fishing Valve Through Rim Hole Valve Stem Ratchet. For TR570 Series Valves Valve Stem Ratchet. For TR540 Series Valves Double-Use Tool. Removes Valve Cores. Screws On Valve Mouth To Open Core Heavy Duty 4-Way Valve Core Tool Core Removing Tool. Screwdriver Grip. Easy Out For Removing Broken Cores Chain Valve Fishing Tool. Guides Valve Smoothly Through Rim Hole While Mounting Tire & Tube Valve Core Tool. For Inserting And Removing. Valve Cores. Long Hex Body For Easy Access Tube Deflating Aspirator. Screwing Aspirator Onto Valve Mouth And Applying Air Chuck To Threaded Inlet Creates Vacuum That Siphons Air From Tube 469-11115 VT-1115I Recessed Valve Core Tool. Core Tool Is Recessed Into The Handle. Design Eliminates The Possibility Of The Tool Poking Through A Shirt Pocket. Easily Fits Into A Shirt Pocket. Includes Clip 469-23430 VG8 Tube Deflator. Removes Air Completely, Quickly After The Valve Core Is Moved. Fits On Every Type Of Standard Bore Valve 469-32850 3285D Lock-On Screwdriver Core Tool. 5" Effective Length. Allows The Valve Core To Stay Attached To The Tool After It Is Removed From The Valve. Protects The Valve Core From Loss. Aluminum Handles Provide A Sturdy Grip For Inserting And Removing Valve Cores 469-32851 3285E Lock-On Screwdriver Core Tool. 6.5" Effective Length. Allows The Valve Core To Stay Attached To The Tool After It Is Removed From The Valve. Protects The Valve Core From Loss. Aluminum Handles Provide A Sturdy Grip For Inserting And Removing Valve Cores 469-52000 469-00673 S-2 673-D Valve Capper Inner Dual Valve Core/Cap Tool Screwdriver/Core Tool. Lock-On Feature For The Valve Core. Metal Pocket Clip. Flat-Head Screwdriver Tip 469-23430 469-05262 469-3 469-00081 469-00673 469-01115 469-00021 469-0056 469-00609 469-00004 469-00020 469-00012 469-00011 469-00018 46 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

268 VALVE HARDWARE Tire Gauges TIRE TREAD DEPTH GAUGES BRAKE LINING THICKNESS GAUGE • Made of durable metal • Each blade features both SAE and Metric measurements • Clear and accurate depth readings for a quick and easy reading • Color coded brake gauge provides effective identification • THE SET IS DIVIDED INTO 3 COLORS: Red, Yellow and Green • Red 2 mm (.787") Brakes must be serviced • Yellow 4 mm (.1575") Brakes must be serviced • Made in Taiwan 454-00 454-00599 454-00712 411-97840 454-01420 454-01599 454-05127 411-65201 ASCOT NO. MFG. NO. 454-00190 454-00599 HT-190L 595 ASCOT NO. MFG. NO. 411-97840 411-65201 DESCRIPTION BG-97840 3-Piece Brake Lining Thickness Gauge 8-Piece Brake Lining Thickness Gauge B650201 454-00712 454-01420 454-01599 454-05127 NS712 HT-1420 599-C 5127 DESCRIPTION 3-Color All-Metal Tread Depth Gauge Tire Tread Depth Gauge. Used To Measure Tire Tread Depth In 1/32" Increments: 0-1" All Metal Tread Depth Gauge Truck Tire Depth Gauge. Calibrated In mm and 1/32nd of Inch. Measures Shoulder Wear and Tread Depth. Durable Metal Construction 3-Color Tread Depth Gauge Red-Yellow-Green Metal indicator bar with black numbers 0-32In 32NDS BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 269 1-2% ACCURACY TPMS BLACK PLATED MASTER TIRE GAUGE POCKET TRUCK GAUGES ASCOT NO. MFG. NO. • RANGE: 10-100 PSI in 2-PSI increments • ACCURACY: ± .5 PSI accuracy • Black electro-plated coating • 2-sided plastic bar • Angled chuck head • Perfect for TPMS applications 476-03501 ASCOT NO. MFG. NO. 476-03501 3501 DESCRIPTION Black Plated Master Tire Gauge w/ Angled Chuck - ± .5% Accuracy 476-10150 BLACK ELECTROPLATED COATING 476-10160 476-10130 GA-150 GA-160 GA-130 476-10160 DESCRIPTION Straight-On/Angled Gauge. 20 -120 psi. Chrome Plated Straight-On/Angled Gauge. 20 -120 PSI. Black Baked Epoxy Protective Finish Dual Foot Angled Pencil Gauge. 20 -120 psi AUTOMOTIVE TIRE GAUGES* • Pencil, chrome tire gauges with nylon indicator bars ASCOT NO. MFG. NO. 476-10105 GA-105 476-10115 476-10100 476-10110 GA-115 GA-100 GA-110M RANGE 10-50 PSI NYLON INDICATOR BARS TRUCK SERVICE GAUGES TYPE Passenger Gauge 20-120 PSI High Pressure Gauge 1-20 PSI 10-50 PSI Low Pressure Gauge Passenger Gauge 75-340 kP Calibrated in PSI & kPa 476-10120 GA-120M 20-120 PSI High Pressure Gauge 150-280 kPa Calibrated in PSI & kPa 476-10125 476-10145 GA-125 GA-145 5-45 PSI 10-75 PSI Air/Liquid Gauge Mid-Range Gauge 70-500 kP Calibrated in PSI & kPa * Imprinted gauges available with your name 476-10125 • Wide variety of service gauges to accommodate the numerous tire and wheel configurations encountered by tire service personnel • Available in chrome plated or protective black epoxy finish as indicated • Calibrated from 10-150 PSI in 2-pound increments • Nylon or metal indicator bars ASCOT NO. MFG. NO. 476-10480 1048T 476-10135 476-11135 476-10155 476-10165 MASTER TEST GAUGES • Used to check accuracy of gauges • Calibrated 10 -160 PSI ASCOT NO. MFG. NO. 476-10140 GA-140 DESCRIPTION Master Test Gauge 476-10140 476-11148 476-11155 476-11048 476-10185 476-11185 GA-135 GA-135S GA-155 GA-165 1048S GA-155S 1048-ADJ GA-185 GA-185S DESCRIPTION Dual Chuck Service Gauge, Straight-On/ Angled With Metal Bar, Black Epoxy Finish Angle Chuck With Nylon Bar Same As Above, Angle Chuck With Metal Bar Straight-On With 30° Reverse Chuck Same As Above, Straight-On With 30° Reverse Chuck, Black Epoxy Finish Dual Straight Service Gauge, Short Length Same As Above, Straight-On With 30° Reverse Chuck, Metal Bar Internal Adjustable Field Service Gauge Dual Foot Service Gauge With Nylon Bar, 180° Chuck, Chrome Plated Same As Above, Dual Foot Service Gauge With Metal Bar WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE 476-10135 476-10155 476-10165 476-10185

GAUGE ACCURACY GUIDE Why do you need Quality Air Gauges? Keeping an eye on tire pressure is a critical part of regular inspection and maintenance. Tire pressure is a critical function in many different ways. Underinflated (or grossly overinflated) tires don’t handle safely, and if you find yourself in a “steer out of trouble” situation, improperly inflated tires can get you into a lot of trouble. Low tires heat up and can blow out, not only destroying the tire but also putting you in an accident-likely situation. Keeping tires properly inflated also makes sense from a dollars and sense perspective: Underinflated tires wear out more quickly. Overinflated tires can make the ride rough, and actually wear out suspension parts. And yes, fuel economy is really affected by tire inflation. The solution to these safety and money issues is as simple as regularly checking tire inflation, and for this you need an accurate tire pressure gauge. PLEASE USE THIS GAUGE ACCURACY GUIDE AS A HELPFUL TOOL! GOOD BETTER ACCURACY ACCURACY BEST 3% 1-2% .5% ACCURACY A QUICK GUIDELINE FOR OUR GAUGES IS SHOWN WITH THE PRODUCTS IN THE SECTIONS BELOW 0.5% ACCURACY DIGITAL & PENCIL GAUGES RECOMMENDED FOR ALL TYPES OF VEHICLES 476-03501 10-100 PSI GOOD BETTER ACCURACY ACCURACY BEST 3% 1-2% .5% ACCURACY 1-2% ACCURACY BAYONET & SIGHT GLASS GAUGES RECOMMENDED FOR ALL TYPES OF VEHICLES 477-10001 0-174 PSI GOOD BETTER ACCURACY ACCURACY BEST 3% 1-2% .5% ACCURACY 1-2% ACCURACY TRUCK SERVICE GAUGES RECOMMENDED FOR ALL TYPES OF VEHICLES 476-1015 10-150 PSI GOOD BETTER ACCURACY ACCURACY BEST 3% 1-2% .5% ACCURACY 477-00001 0-150 PSI 476-32921 10-160 PSI GOOD BETTER ACCURACY ACCURACY BEST 3% 1-2% .5% ACCURACY PSI 477-11237 0-175 PSI GOOD BETTER ACCURACY ACCURACY BEST 3% 1-2% .5% ACCURACY 1-2% ACCURACY PENCIL GAUGES RECOMMENDED FOR ALL TYPES OF VEHICLE 476-10160 20-120 PSI GOOD BETTER ACCURACY ACCURACY BEST 3% 1-2% .5% ACCURACY WARNING: For more information go to www.P65Warnings.ca.gov. 105 PSI 0-138 PSI 1-2% ACCURACY DIGITAL GAUGES RECOMMENDED FOR ALL TYPES OF VEHICLES 1-2% ACCURA ANALOG GAUGES RECOMMENDED FOR ALL TYPES OF VEHICLES

VALVE HARDWARE 271 DIGITAL TIRE GAUGES • Large, easy-to-read LCD numbers for precise readings • Features pinpoint accuracy, convenient air bleed,protective casing • Features dual foot chuck • Reads 3 to 160 PSI ASCOT NO. MFG. NO. DESCRIPTION 476-10500 476-15038 DT-105 Digital Passenger Gauge DT150-38CV Digital Truck Gauge DIGITAL TREAD DEPTH GAUGE • Made from strong carbon fiber composite • Zero setting in any position • Metric, decimal inch and fraction inch toggle • Large LCD display ASCOT NO. MFG. NO. DESCRIPTION 454-00209 NS209S Digital Tread Depth Gauge DIGITAL TRUCK TIRE GAUGE • OPERATING RANGE: 0-180 PSI • ACCURACY: +/- 1% + 0.5 PSI at 100 PSI • Auto power off, simple operation • Built-in backlight with clear, large LCD display ASCOT NO. MFG. NO. N/A DESCRIPTION 476-03238 Digital Truck Tire Gauge DIGITAL POCKET GAUGE • RANGE: 0-150 PSI in .5 PSI increments • ACCURACY: ±1% PSI accuracy • Large LCD display • Red backlight • Angled chuck head ASCOT NO. MFG. NO. 476-32380 3238P DESCRIPTION Digital Pocket Gauge w/ Angle Chuck - 1-150 PSI HANDLE & BLEEDER VALVE 476-32380 454-00209 478-03238 DIAL GAUGE • Calibrated 0 to 160 PSI in 5 PSI units and 150 to 1100 in kPa metric scale • 14" flexible hose • Holds pressure readout until released ASCOT NO. MFG. NO. 476-00274 DESCRIPTION GA-274 Dial Gauge. 0 -160 PSI DIAL GAUGE W/ EXTENSION HANDLE & BLEEDER VALVE • 18" Standard & Large Bore Gauge w/Extension • Handle & bleeder valve • Calibrated 0-160 PSI in 5 PSI increments ASCOT NO. MFG. NO. 476-00276 GA-276 DESCRIPTION Dial Gauge w/ Extension Handle & Bleeder Valve - 0-160 PSI STANDARD AND LARGE BORE AIR/LIQUID MASTER GAUGE • Straight-on air chuck fits both standard and large bore valves • Calibrated to 0 to 160 PSI in 1 PSI increments and 0-1100 in kPa metric scale • Has recalibration feature and replaceable filters ASCOT NO. MFG. NO. 476-00290 DESCRIPTION GA-290 Standard and Large Bore Air/Liquid Master Gauge LARGE BORE DIAL AIR GAUGE • 15" Large Bore Air Gauge with built-in filter and accessible reservoir for easy cleaning ASCOT NO. MFG. NO. DESCRIPTION 476-30377 GA300-377 Large Bore Dial Air Gauge BUILT-IN FILTER WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

272 VALVE HARDWARE Tire Gauges (cont.) DIGITAL TIRE PRESSURE GAUGE • OPERATING RANGE: 4-100 psi • Automatically shuts off after 30 seconds of non-use to save battery life • Easy-grip handle features innovative material to ensure gauge is held properly for the most accurate reading ADJUSTABLE FIELD SERVICE GAUGES • Field adjustable truck service gauges • External Adjustment Screw makes calibration quick & easy • Adjustable Calibration • Plated finish provides corrosion protection and great looks • 4-sided metal indicator bar is durable and easy to read • Hang-up ring provides a convenient method of storage • Flat-head screwdriver required for calibration AU ADJUSTABLE CALIBRATION SHUT ADJUSTMENT SCREW EXTERNAL EASY GRIP HANDLE 476-05900 ASCOT NO. MFG. NO. 476-05900 476-05988 5900 5988 DESCRIPTION Digital Tire Pressure Gauge Digital Tire Pressure Gauge w/ Backlight DILL ADJUSTABLE TRUCK TIRE GAUGES 1-2% ACCURACY 476-01046 ASCOT NO. 476-07125 476-07233 476-07262 476-07275 476-07285 476-17275 476-17285 476-27275 476-37285 MFG. NO. DESCRIPTION 7125H 7233 7262 Straight and 30 Degree Reverse, Chrome, White Nylon Bar 360 Deg. Swivel for Standard and Large Bore Straight and 30 Degree Reverse, Black, Black Metal Bar 7275RB Adjustable Truck Service Gauge with 25 Degree Offset Angle Chuck (Internally Adjustable) 7285R Dual Foot Service Gauge With Reverse Angle Chuck (Internally Adjustable) 7275RBE Adjustable Truck Service Gauge with 25 Degree Offset Angle Chuck (Externally Adjustable) 7285E 7275 7285 External Adjustable Truck Service Gauge Dual Angle, Chrome, Black Metal Bar Straight and 30 Degree Reverse, Chrome, Black Metal Bar 476-17285 476-07275 1-2% ACCURACY ASCOT NO. MFG. NO. 476-00135 476-00165 476-00185 DESCRIPTION 135S-RCL Adjustable Dual Foot Service Gauge 165S-RCL Adjustable Dual Foot Service Gauge 185S-RCL Adjustable Dual Foot Service Gauge -180 Degree Reverse Chuck 476-00250 250S-RCL Adjustable Large Bore Pencil Gauge 476-00255 476-01046 476-11048 1048-ADJ 255S-RCL Adjustable Large Bore Swivel Gauge 1046-ADJ Screwdriver Adjustable Calibration Gauge Internal Adjustable Metal Bar Gauge 476-05988 The External Adjustment Screw makes calibration quick & easy. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 273 MADE IN THE USA MASTER TEST GAUGE MASTER AIR GAUGE CHECKING STATIONS • INFLATION RANGE: 0-200 PSI • ACCURATE TO: ±1 PSI • Designed to allow users to quickly and accurately check their air gauges and inflator gauges • THREE CHECKING POINTS: standard valve port, large bore valve port & female coupler port • Most accurate checking station on the market • Equipped with a regulator and filter for proper air and water filtration • CARB Certified • Back-lit readout for ease of use • Can be mounted to a bench or a wall MOST ACCURATE CHECKING • For checking accuracy of service and pencil gauges • Has dual foot chuck and a retaining valve to hold pressure reading after gauge is removed from valve to within +/- 2% of total dial reading • Includes protective case • MADE IN THE USA ASCOT NO. MFG. NO. DESCRIPTION 476-08860 8860C RANGE Master Test Gauge 0 - 160 PSI 476-35020 DILL AIR GAUGE CHECKING STATIONS • A quick accurate way for tire dealers to check the accuracy of air gauges - a must for facilities that need to comply with California standards • 0-160 psi liquid filled gauge • Access valve mounted on a pressure reservoir • 1/4 inch NPT filter/regulator to remove contaminants from compressed air • A certificate of accuracy for ISO records • Designed to easily bolt to a wall or table • MADE, TESTED & CERTIFIED IN THE USA MADE IN THE USA 476-08860 476-35021 EASILY BOLT TO WALL OR TABLE 476-08501 ASCOT NO. MFG. NO. 476-35020 476-35021 DESCRIPTION TS3502A TS3502AL Digital Gauge Checking Station Air/Liquid Gauge Checking Station ASCOT NO. MFG. NO. DESCRIPTION 476-03502 476-08500 476-08501 3502 8500 8500D 476-08900 8900 Replacement Digital Air Gauge Dill Air Gauge Checking Station (With large bore port) Dill Digital Air Gauge Checking Station (With large bore port) Replacement Dial Air Gauge (Fully Calibrated) WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

274 VALVE HARDWARE MADE IN THE Dill USA Gauges Proudly made in the USA USA 476-07277 A DILL USA PENCIL GAUGES DILL USA PENCIL GAUGES† ASCOT NO. MFG. NO. RANGE 476-05602 476-05603 476-05604 476-07212 476-07213 476-07215 476-07226 476-07229 476-07230 476-07277 476-07290 476-01941 5600-CH-USA* 5600-ST-USA* 5600-CF* 7212-USA* 7213-USA* 7215-USA 7226H* 7229-USA* 7230-USA* 7277-USA* 7290-USA* 941-USA* 10-75 PSI 10-75 PSI 10-75 PSI 20-120 PSI 10-50 PSI 20-120 PSI 20-120 PSI 1-20 PSI 5-45 PSI 10-75 PSI 20-90 PSI 20-120 PSI B DILL USA DUAL FOOT TRUCK GAUGES DESCRIPTION Chrome Finish Gauge Standard Silver Gauge Classic Camouflage Gauge High Pressure Gauge Passenger Car Gauge High Pressure Gauge Small Diameter Straight Chuck - Fits Standard and Large Bore Low Pressure 1/2 PSI Units Air Liquid Gauge Assorted 10 Colored Pencil Display Pack Standard Blue Pencil Gauge High Pressure Gauge † Red, blue, green, gold, purple and grey colors available. DILL USA DUAL FOOT TRUCK GAUGES ASCOT NO. MFG. NO. RANGE 476-07248 476-07263 476-07278 7248-USA* 7263-USA* 7278-USA* 20-120 PSI 20-120 PSI 20-120 PSI FINISH Chrome Aluminum Camouflage Chrome Chrome Gold Chrome Chrome Chrome Chrome Blue Silver QTY./PACK 10 200 10 10 10 10 10 10 10 10 200 10 DESCRIPTION FINISH Dual Angle Foot Chuck Straight-On 30° Reverse Chuck Straight-On 30° Reverse Chuck DILL USA TRUCK SERVICE GAUGES ASCOT NO. MFG. NO. RANGE 476-00001 476-00002 476-00003 SG1 SG2 SG3 10-150 PSI 10-150 PSI 10-150 PSI Chrome Black Powder Chrome QTY./PACK 10 10 10 DESCRIPTION FINISH Dual Foot Head; Chrome Body with Black Markings on a White Bar Dual Foot Head; Chrome Body with White Markings on a Black Bar - Adjustable * Denotes gauges meet the proposed California Regulation for Under Inflated Vehicle Tires No. 95550. Chrome Chrome Dual Foot Head; Black Powder Coated Body with White Marking on a Black Bar - Adjustable Black Powder QTY./PACK 1 1 1 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE 476-05602 476-05604 476-07226 476-07230 476-07248 476-07263 476-00001 476-00002

VALVE HARDWARE 275 Dill USA Chucks Proudly made in the USA MADE IN THE USA 478-62930 478-62931 478-62932 B DILL USA CLIP-ON AIR CHUCKS DILL USA AIR CHUCKS ASCOT NO. MFG. NO. 478-06172 478-06173 478-06174 478-16174 478-06175 478-06176 478-06999 478-16999 6172-USA 6173-USA 6174-USA 6174-BLK-USA 6175-USA 6176-USA 6999-USA 6999L-USA LENGTH 6" 6" 14" 14" 6" 6" 6" 6" DESCRIPTION FINISH Angle Chuck for Inner Dual Wheels with Tilted Valves Lock Feature Straight-On 180° Degree Reverse Angle Chuck Extra Long Length Lock Feature Straight and 30° Reverse Angle Chuck Extra Long Length Lock Feature Straight and 30° Reverse Angle Chuck Lock Feature Straight-On 30° Reverse Angle Chuck For Standard Air Line Service Straight with 30° Reverse Angle Chuck Same as 6999-USA Except for Lock-On Chrome Chrome Chrome Black Powder Black Powder Chrome Chrome Chrome QTY./PACK 10 10 10 10 10 10 10 10 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE 478-06172 478-06175 478-16999

276 VALVE HARDWARE Air Chucks DU AIR CHUCK BALL FOOT CHUCKS 478-04500 478-00305 478-05451 478-02985 478-00001 ASCOT NO. MFG. NO. 478-00305 478-00315 CH-305 CH-315 478-00325 478-05451 CH-325 — 478-00707 — 478-04500 — 478-04501 — DESCRIPTION Ball Foot Chuck. 1/4" Female Thread (Normally Closed) Ball Foot Chuck With Lock-on Clip. 1/4" Female Thread (Normally Closed) Ball Foot Chuck With Lock-on Clip. 1/4" Female Thread (Normally Open) Ball Foot Chuck With Lock-on Clip. 1/4" Female Thread (Normally Closed - Alligator) Replacement Washer. For 478-05451 Ball Foot Chuck Air Chuck Clip. For All Ball Foot Chucks Economy Clip for Clip-On Ball Foot Air Chuck ASCOT NO. MFG. NO. 478-00335 478-01330 CH-335 6568-FT 478-01335 478-01350 478-01351 478-01352 478-03300 478-03301 478-03330 478-03370 478-06585 DESCRIPTION Angled Chuck. Plated Finish (Normally Closed) Dual Foot Chuck. 1/4" FPT, 6" Long, Lock-On Threads (Normally Open) CH-335-OP Angled Chuck. Plated Finish (Normally Open) CH-350-LO Straight-On/Angled Chuck. Protective Black Epoxy Finish (Normally Closed) 6568T-FT 6568TL CH-330 Straight-On/Angled Chuck. Black Epoxy Finish (Normally Open) Dual Foot Black Chuck 14" (Normally Closed) CH-330-LO Straight-On/Angled Chuck. With LockOn Threads (Normally Closed) Straight-On/Angled Chuck (Normally Closed) CH-333-LO Straight-On/Angled Chuck. 14” Long (Normally Closed) CH-370-LO Straight-On/180° Chuck. 1/4” NPT (Normally Closed) 6585LB Large and Standard Bore Chuck. 1/4” NPT (Normally Closed) LOCK-ON AIR CHUCKS ASCOT NO. MFG. NO. 478-00340 CH-340 478-02985 478-02995 478-06293 CH-360 EUROPEAN-STYLE CLIP-ON CHUCKS ASCOT NO. MFG. NO. 478-00001 N-1200 DESCRIPTION 478-06293 European-Style Clip-On Chuck. Serrated Shank for 1/4” I.D. Hose. Silver (Normally Open) European-Style Clip-On Chuck. 1/4” Female Fitting. Silver Clip (Normally Closed) CH-360-OP European-Style Clip-On Chuck. 1/4” Female Fitting. Black Clip (Normally Open) 6293-S European-Style Clip-On Chuck. 1/4" Barbed Fitting. Straight Clip Chuck. Small Head Design. Silver Clip (Normally Open) DESCRIPTION Lock-On Air Chuck. 1/4” NPT Female Thread. Securely Locks Onto Valve When Sleeve Is Pushed Forward 478-01340 ANGLE HEAD AIR CHUCKS ASCOT NO. MFG. NO. 478-03238 3238P-C 478-05265 DESCRIPTION Angle Head Air Chuck - Chrome Finish 478-03238 CH-340-OP Lock-On Air Chuck. Available For Use With Tire Changers H-5265 Lock-On Air Chuck. Specially Designed To Lock Onto The Cap Of A Standard Bore Valve Stem When The Sliding Sleeve Is Pushed To Forward Position 478-00340 478-05265 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE 478-00335 478-01350 478-01352 3300 478-033 478-06585

VALVE HARDWARE 277 REVERSE ANGLE LOCK-ON AIR CHUCK TRUCK LOCK-ON EXTENSION CHUCK • Reverse angle lock-on chuck allows easy access to outer dual valve EASY ACCESS TO OUTER VALVE 478-00345 ASCOT NO. MFG. NO. 478-00345 CH-345 478-01345 DESCRIPTION Reverse Angle Lock-On Air Chuck (Normally Closed) CH-345-OP Reverse Angle Lock-On Air Chuck (Normally Open) AUTO LOCKING DESIGN • Extended reach for dual wheels • Easy on/off application • Steel pins for increased service life • Automatic locking design • Improves seal on flow through caps • 22" overall length LONG REACH STRAIGHT LOCK-ON CHUCK EASY ON/OFF APPLICATION ASCOT NO. MFG. NO. 478-00346 CH-346 478-01346 DESCRIPTION Long Reach Straight Lock-On Chuck (Normally Closed) CH-346-OP Long Reach Straight Lock-On Chuck (Normally Open) 478-00346 EUROPEAN-STYLE CLIP-ON CHUCK 478-32072 478-02975 ASCOT NO. MFG. NO. 478-02975 DESCRIPTION CH-360S European-Style Clip-On Chuck. 1/4" Female Fitting - With Spring Loaded Deflector Pin ASCOT NO. MFG. NO. 478-32072 DESCRIPTION 3207I-L2 Truck Lock-On Extension Chuck WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

278 VALVE HARDWARE Air Chucks (cont.) LARGE BORE GAUGES LARGE BORE AIR CHUCKS 454-05300 454-01410 478-00322 478-00326 478-00377 478-00328 478-04660 454-05131 ASCOT NO. MFG. NO. 454-01410 N-1410 454-05131 5131 454-05300 5300 476-10240 DESCRIPTION Off-Highway Tire Tread Depth Gauge. Calibrated With 32nds And MM. Magnified Sight Glass For Easy Readability Large Bore Tread Depth Gauge Tire Tread Depth Gauge w/ Magnifying Lens - Calibrated with 32nds & MM 476-02555 GA255S-RCL Recalibrateable Large Bore Swivel Gauge. Nickle Plated Brass. Metal Slide Bar. Calibrated 10-150 PSI in 2 lb. Units. Swivels 360° for Those Hard-to-Reach Valves 476-07233 7233 476-10240 GA-240 476-10250 GA-250S 476-10255 GA-255S Dill Swivel Gauge Straight-On Gauge. 20 - 120 PSI Swivel Gauge. Nickel Plated Brass. Plastic Bar. Calibrated 10 - 150 PSI In 2 lb. Units. Swivels 360° For Those Hard-To-Reach Valves Swivel Gauge. Nickel Plated Brass. Metal Slide Bar. Calibrated 10 - 150 PSI In 2 lb. Units. Swivels 360° For Those Hard-To-Reach Valves 478-00328 478-00377 478-04660 478-06190 478-10013 AC-B10 AC-B11 AC-B12 6190 10013 ASCOT NO. MFG. NO. 478-00322 322 478-00326 326 DESCRIPTION Large Bore Dual Foot Air Chuck. 45° Chuck For Easy Access To Valve. 1/4" NPT Female Thread Screw-On Air Chuck. .458"-26 Internal Thread. 1/2” NPT External Thread. Full Flow For Seating Of Tire Beads Short Lock-On Air Chuck. Locks On Valve When Cocked On Threads. Greater Air Flow And Seat Cannot Be Blown Out If Seal Fails. 1/4" NPT Thread Long Lock-On Air Chuck Clip-On Air Chuck. Locks Onto Valve When Sleeve Is Pushed Forward, Releases When Sleeve Is Pulled Back. 1/4" NPT Female Thread Quick Connection Inflation Gauge. For Use With 6185 Check Valve. Sliding Sleeve Locks Chuck Onto Check Valve. Permits Unrestricted Air Flow Large Bore Screw-On Chuck. Fits 3/8" ID Air Hose 476-10250 476-10255 478-06190 478-10013 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 279 Inflator Gauges AUTOMATIC INFLATOR RPG DIGITAL INFLATOR • Auto on INFLATION: exceeds E • Multi-sc • Serial/ba • Backlit digital displa • Wire shea eliminates kinking • Impact absorbing bumpers • Rubber grip on chuck • Tough die c aluminium body • 20" hose with hold-on chuck • Quick and easy • All the features of a wall mounted inflator in a portable hand held unit • BUILT-IN OVERPRESSURE SETTING FUNCTION • Auto on/off operation • MAX INFLATION: 174 PSI • Accuracy exceeds EC Standards • Multi-scale gauge • Serial/batch numbered • Backlit digital display • Wire sheathed hose eliminates kinking • Tough poly carbonate/ABS body • Two programmable pre-set preset buttons • Fast and safe 5' hose with lock-on chuck • Built-in rechargeable lithium-ion battery • Up to 15 hours of continuous use • Includes AC adapter for charging & certificate of calibration ASCOT NO. MFG. NO. 477-11612 DESCRIPTION 11.0612NA Automatic Inflator - 5' Hose w/ Clip-On Air Chuck 477-10312 MULTI-GAUGE SCALE: RPG DIGITAL TIRE INFLATORS • INFLATION RANGE: 0-174 PSI • ACCURATE TO: ± 1.2 psi • Auto ON, upon air pressure sensing • Large tilted LCD displa with backlight and 90 second auto OFF • Multi-scale gauge • Die-cast aluminum unit with rubber protective sleeve • Lightweight handle and trigger • Wire sheathed hose on flex area of hose to eliminate kinking ASCOT NO. MFG. NO. 477-11235 Dual Angle Chuck ASCOT NO. MFG. NO. 477-10312 Multi-Scale Gauge DESCRIPTION 10.3012RPG Digital Inflator w/ 20" Hose and Hold-On Air Chuck Hang Point 477-11237 DESCRIPTION 11.0723ASC5 RPG Digital Inflator: 20" Hose w/ Clip-On Chuck 11.0723ASC7 RPG Digital Inflator: 6' Hose w/ Clip-On Chuck 477-11239 — 477-11240 — Replacement 6' Hose w/ Clip-On Chuck for Digital Inflators Replacement 20" Hose w/ Clip-On Chuck for Digital Inflators WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

280 VALVE HARDWARE Inflator Gauges (cont.) PRO DIGITAL TIRE INFLA • ACCURATE: Measures in PSI (0-25 (0-1800), kg/cm2 (0-18), and Bar (0Meets ANSI/ASME B40.1 standards • SWIVELS: Reads at any angle, lays fla your toolbox. Gauge protected by rubber boot • BACKLIT DISPLAY: Auto-on when tire pressure is detected; Auto-off aft inactivity to save battery • EASY HANDLING: Durable/ergonomic grip. Quick fine tuning in case you exceed the target pressure • 6" STRAIGHT FOOT CHUCK: Full swivel and hose w/threaded lock-on design, enabling hands-free inflation DIGITAL HAND-HELD TIRE INFLATOR* • INFLATION RANGE: 0 - 174 PSI • ACCURACY: +/- .2 PSI • 6' Hose • Lightweight shock-resistant design • High specification ceramic sensor • Long life, easily replaceable battery • Available in custom hose lengths and chuck styles • Valve has provisions for checking air pressure during inflation • Threaded for 1/4" male NPT hose fittings ASCOT NO. MFG. NO. 477-10001 477-00577 * This gauge provides more accurate air pressure readings which is essential with TPMS. DESCRIPTION Accura 1 Digital Hand-Held Tire Inflator ASCOT NO. MFG. NO. DESCRIPTION 477-00577 S-577D Pro Digital Tire Inflator - 15" Hose w/ Lock-On Threads MK4 HEAVY DUTY HAND-HELD INFLATOR PRECISION DIGITAL TIRE INFLATOR • Most accurate pressure gauge on the market (0-160 PSI), Extreme ± 0.05% Accuracy • EASY-TO-READ DIGITAL DISPLAY: Large articulating easy to read digital display that is easy to read in any light condition, at any angle, display automatically adjusts for left or right handed use, or vertical portrait mode • High contrast electrophonic screen • AUTO ON/OFF FEATURE: Powers on when air presser is detected, power off after 120 seconds of inactivity • Deflation button • Job site work light, valve cap holder, integrated hang hook for storage • NEW VIEWING WINDOW: Lar window gives 20% greater field of viewing • LIGHTER WEIGHT: G body weighs 2.035lbs, less work strain and easier for repetitive use • BIOMORPHIC SHAPE: Ergonomic, easier to use and less prone to damage when dropped • NEW VALVE MECHANISM: Simplified 2-stage mechanism design prevents user having to “push” against full line pressure on deflate preventing fatigue • NEW PISTON & SEAL DESIGN: New design, less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy • NEW CLEAR LITHOGRAPHIC DESIGN: Fast and accurate reading of results • MAXIMUM INFLATION PRESSURE: 160 PSI ASCOT NO. MFG. NO. 477-00587 DESCRIPTION S-580e-KIT Precision Digital Tire Inflator - Dual Foot Chuck ASCOT NO. MFG. NO. 477-10004 MK4 ! CAUTION BUYER'S GUIDE DESCRIPTION MK4 Heavy Duty Hand-Held Inflator WARNING: Never inflate a tire on a multi-piece rim (a rim made up of 2 or more separate pieces) unless the tire and rim are mounted in OSHA regulation 29-CFR Part 1910.177 or D.O.T. approved tire inflation cage. OSHA Regulations require that an inflator gauge must be equipped with a lock-on chuck and have a hose extension sufficiently long for the operator to stand clear of the possible trajectory of a multi-piece rim. NEW PISTON & SEAL DESIGN ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 281 DILL DIGITAL TIRE INFLATOR GAUGE • Digital backlight readout • 0-170 PSI range • 2 or 6ft. hose • Clip-on or dual-foot chuck • ASSEMBLED AND TESTED IN THE USA HEAVY DUTY HOSE INFLATOR CLIP-ON OR DUAL FOOT CHUCK • Has two separate clip-on chucks with fiv foot hoses • One chuck, CH-360, fits standard bor the other, H-4660A, lar valves • Has springloaded, hand-operated valve and has provisions for checking air pressure during inflation • Threaded for 1/4" male NPT hose fittings B READOUT ASCOT NO. MFG. NO. 477-76023 477-76029 477-76063 DESCRIPTION TWO 7260-2-6293E 7260-2-6999FT 7260-6-6293E 477-76069 7260-6-6999FT Digital Inflator - 2 Ft. Hose - Clip-On Chuck Digital Inflator - 2 Ft. Hose - Straight Chuck Digital Inflator - 6 Ft. Hose - Clip-On Chuck Digital Inflator - 6 Ft. Hose - Straight Chuck SEPARATE CLIP-ON CHUCKS 477-00404 ASCOT NO. MFG. NO. 477-00404 I-404 DILL DIGITAL INFLATORS W/ STAINLESS STEEL HOSE • Two-foot, kinkresistant, stainless steel hose • Large backlit display • Auto on/off feature • Dual foot or Clip-on Made in the USA air chuck • Assembled and tested in the USA CHUCK TIRE INFLATOR GAUGES • ACCURATE: Performance-tested and calibrated. Measures in pounds per squar inch (PSI, 10-160, 2-lb. increments) • Kilopascal readings also available per special order (kPa, 80-840, increments of 20) • HEAD CHUCK: Makes tire valves mor with the two heads for easier acces EASY-TO-USE INFLATOR: Heavy-dut construction, magnifying window lens, full-s chuck, 15-inch hose • REPLACEABLE P Gauge and valve cartridges can bo DESCRIPTION Heavy Duty Hose Inflator ASCOT NO. MFG. NO. 477-72623 477-72629 DESCRIPTION 7260-S2-6293E 7260-S2-6999FT Digital Inflator - 2 Ft. Stainless Steel Hose - USA-Made Clip-On Chuck Digital Inflator - 2 Ft. Stainless Steel Hose - USA-Made Dual Foot Chuck ASCOT NO. MFG. NO. 477-00506 S-506 477-00516 S-516 DESCRIPTION Dual Head Chuck Tire Inflator Gauge Straight Foot Chuck Tire Inflator Gauge WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

282 VALVE HARDWARE Inflator Gauges (cont.) AIR LINE INFLATORS • Ideal for gauging and inflating dual tires on trucks and buses as well as passenger cars and light trucks • Solid brass indicator bar • Allows operator to stand away while inflating and deflating tires • Bleeder valve allows user to adjust tire pressure without touching either the tire or valve stem STANDARD # 477-00001 477-00011 477-00111 477-01111 477-11111 HAND HELD # DIGITAL BODY # DESCRIPTION AIR LINE INFLATOR GAUGE 477-20001 477-30001 12" Hose w/ Dual Foot Chuck N/A 477-20111 477-21111 N/A 477-30011 12" Hose w/ Tapered Chuck 12" Hose w/ Lock-On Chuck 12" Hose w/ No Chuck 477-30111 477-31111 N/A 12" Hose w/ Lock-On Chuck & Bleeder Valve SAFETY INFLATOR GAUGE 477-00002 477-20002 477-30002 3’ Hose w/ Ball Foot (Clip-On) Chuck 477-00003 477-20003 477-30003 3’ Hose w/ Straight Lock-On Chuck 477-00004 477-20004 477-30004 6’ Hose w/ Ball Foot (Clip-On) Chuck 477-00005 477-20005 477-30005 6’ Hose w/ Straight Lock-On Chuck 477-00008 477-20008 477-30008 9’ Hose w/ Ball Foot (Clip-On) Chuck 477-00009 477-20009 477-30009 9’ Hose w/ Straight Lock-On Chuck 477-00010 477-00012 477-00014 477-00015 477-20010 477-30010 12’ Hose w/ Ball Foot (Clip-On) Chuck 477-20012 477-30012 12’ Hose w/ Straight Lock-On Chuck 477-20014 477-30014 6’ Hose w/ No Chuck 477-20015 477-30015 15’ Hose w/ Straight Lock-On Chuck 477-00020 477-20020 477-30020 20’ Hose w/ Straight Lock-On Chuck 477-00033 477-20033 477-30033 3’ Hose w/ EuroStyle Chuck 477-00066 477-20066 477-30066 6’ Hose w/ EuroStyle Chuck 477-00099 477-20099 477-30099 9’ Hose w/ EuroStyle Chuck 477-00112 477-00113 477-00115 477-00118 477-00144 477-01112 477-20112 477-20113 477-20115 477-20118 477-21112 477-30112 3’ Hose w/ No Chuck 477-30113 3’ Hose w/ Sleeve Chuck 477-30115 6’ Hose w/ Black Epoxy Lock-On Chuck 477-30118 9’ Hose w/ No Chuck 477-20144 477-30144 12’ Hose w/ EuroStyle Chuck 477-31112 12’ Hose w/ No Chuck Air Line Inflator Gauge ASCOT NO. DESCRIPTION 477-01006 477-01009 477-01012 477-01025 6' Hose with AC-B12 Large Bore Chuck 9' Hose with AC-B12 Large Bore Chuck 12' Hose with AC-B12 Large Bore Chuck 25' Hose with AC-B12 Large Bore Chuck Safety Inflator Gauge with Straight Lock-On Chuck Safety Inflator Gauge with Ball Foot (ClipOn) Chuck SOLID BRASS INDICATOR BAR LARGE BORE AIR LINE INFLATOR GAUGES • Large Bore inflation unit with in-line gauge • Equipped with AC-B12 large bore chuck • Gauge is calibrated 10-140 PSI in 2 lb. increments • Available in hose lengths of 6', 9' & 12' • 47701006 Similar to Haltec I-409 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

VALVE HARDWARE 283 4-WAY INFLATOR KIT • Quick coupler connects directly to the inflator • Slide valve allows air supply to be turned on/off • Includes all USA hoses and connection 4-WAY INFLATOR ACCESSORY BLOCK • Lightweight aluminum manifold splits air lines into 4 seperate lines • Slide valve turns air on/off to start inflation INCLUDES 25' HOSES & • (4) 1/4” universal quick couplers allow for any type fitting • 3’ whip hose 477-11624 ASCOT NO. 477-11624 DESCRIPTION 4-Way Inflator Accessory Block SOT NO G. NO 477-11623 DESTION 11.0623NA 4-Way Inflator Kit 6-IN-1 AIR LINE MANIFOLD KIT • Lightweight aluminum manifold • 1/4” air inlet • (6) 1/4” outlets • (3) 1/4” aluminum plugs 477-47732 LARGE BORE INFLATION GAUGE • Large bore inflation unit with in-line gauge • Equipped with H-4660A chuck and 6' hose • Gauge calibrated 10-120 PSI (70-800 kPa) in 2 PSI increments ASCOT NO. MFG. NO. DESCRIPTION 477-00409 I-409 Large Bore Inflation Gauge 477-00409 ASCOT NO. 477-47732 DESCRIPTION 6-in-1 Air Line Manifold Kit WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE VALVE HARDWARE

284 VALVE HARDWARE Inflator Gauges (cont.) INFLATOR SYSTEM • 1/2" ball valve with dial gauge for checking pressure • Equipped with safety coupler for releasing pressure in case of emergency • 1/2" NPT connection • 3/8" ID for maximum air flow 477-35020 SAFETY COUPLER FOR ASCOT NO. MFG. NO. DESCRIPTION 477-35020 EMERGENCIES I-350-20 Inflator System INCLUDES HOSES & CONNECTION INFLATOR SYSTEM • 1/2" ball valve with dial gauge for checking pressure • Equipped with safety coupler for releasing pressure in case of emergency • 1/2" NPT connection • 3/8" ID for maximum air flow ASCOT NO. MFG. NO. DESCRIPTION 477-34020 I-340-20 Inflator System INFLATOR SYSTEM • Safely removes operator away from blast zone by using the 15' hose • Shut-off valve (ball valve) enables operator to stop inflation for proper tire inspection • Includes IN-95 and three additional unions to adapt different sizes, such as SLB, MB & ZB ASCOT NO. MFG. NO. DESCRIPTION 477-49515 I-495-15 Inflator w/ 15' Hose BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE

WARNING: For more information go to www.P65Warnings.ca.gov.

PROFESSIONAL TIRE REPAIR, TPMS & SUPPLIES • Industry Leading Customer Service • World Class Training • 24/7 TPMS Tech Support ONE SENSOR ONE SOLUTION Revolutionary TPMS Sensor & Sensor Tool from Smart Sensor Combines 314.9 MHz, 315 MHz & 433.92 MHz All in ONE Sensor YOUR ONE-STOP SOURCE FREE wifi Updates, Built-in Relearns, OBDII Reset & VIN/TIN Image Capture FOR ALL YOUR TIRE & WHEEL SERVICE NEEDS www.31inc.com

287 Tire Changers & Accessories Wheel Balancers & Accessories Lifts Rubber Blocks Lift Pads Rolling Jacks Work Stations WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

288 SERVICE EQUIPMENT Ascot Supply Tire Changer MANUAL TIRE CHANGER • Small tire changing system for lawn & garden, ATV and other small tires/wheels • Not for passenger tires • Adjustable to accomodate multiple tire/wheel sizes • High quality, energy saving & environmentally friendly • Portable and equipped with professional accessories • Can be operated easily without the use of power or pneumatic supplies • Works for an impressive range of tires • Great for family and commercial garages, racing teams, emergencies and any time a convenient changer is required OPTIONAL BASE PLATE FOR MANUAL TIRE CHANGER • Optional base plate is sold seperately • Base plate eliminates anchoring to the floor and provides a non-slip surface for the technician • Base plate dimensions: 24” x 30” • 12 gauge steel (2.5 mm) NONSLIP ADJUSTABLE NO NEED FOR POWER OR PNEUMATICS ASCOT NO. MFG. NO. 441-00202 441-00002 DESCRIPTION BJ-CO2 BJ-CO2-BASEPLATE Ascot Supply Manual Tire Changer Optional Base Plate for Manual Tire Changer BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT

SERVICE EQUIPMENT 289 CEMB Tire Changers SM628BPS ADVANCED SWING ARM TIRE CHANGER WITH BEAD PRESS SYSTEM • Quick-change steel mount head with plastic protectors and polymer mounting head • Selfcentering, dual clamping cylinder heavy duty turntable • Clamp up to 32" diameter rims and tires up to 44" diameter • Heavy-duty 220V, 1Ph phase inverter, constant torque two-speed (8-15rpm) 220V 3Ph motor • High-Performance BPS (Bead Press System) for simple servicing of stiff side wall tires • Press cone kit allows simple push down external rim clamping • Lower bead roller demounts tires without using the mounting head • Adjustable two-way high-power bead breaker side-shovel with protector sleeve • Two stage tire inflation • Jaw-placed jets and tire inflator includes accumulator safety limiter SM645HPA PERFORMANCE TILT BACK TIRE CHANGER WITH HPA BEAD PRESS • Automatic tilt-back mount-demount arm re-positions for next wheel without adjustments • Heavy-duty 110V motor with high torque, handles the difficult sidewall tires and deep drop center rims • Bead breaker shovel: Adjustable to the correct angle to fit diameter and width of tire • Two-stage tire bead sealing inflation jets • Tire inflator includes safety limiter • HPA two-sided press arm system is a must have for simple servicing of stiff sidewall tires and deep drop center rims • Includes press arm, press follower and two tire lifter discs • Optional polymer mount head kit SM825 SWING ARM PASSENGER & LIGHT TRUCK TIRE CHANGER • Air tank in tower • Dual clamping cylinders • Semi-automatic swing arm • Inflator jets on each clamp • Inserts protect aluminum wheels • Adjustable bead breaker SWING AIR TANK 443-91825 HEAVY DUTY TURNTABLE 443-62801 443-64501 CEMB TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-62801 443-64501 443-91825 MFG. NO. SM628BPS SM645HPA SM825 POWER SUPPLY 220VAC 110VAC 110 VAC CLAMPING 14" - 27" 14" - 26" 15" - 26" OUTSIDE CLAMPING 11" - 24" 12" - 24" 13" - 24" MAX TIRE OUTSIDE 44" 47" 47" BEAD BREAKER FORCE 6393 lb. 6790 lb. 5500 lb. MAX RIM WIDTH 15.5" 13.5" 15" GROSS SHIPPING WEIGHT 630 lb. 1050 lb. 630 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

290 SERVICE EQUIPMENT Corghi Tire Changers A20241TI 2-SPEED TILT BACK TIRE CHANGER • Ideal for all OEM and aftermarket wheels • Preferred market choice for reliablity and long lasting performance STURDY A2030 2-SPEED TILT BACK TIRE CHANGER • Ideal for all OEM and aftermarket wheels • Preferred market choice for reliablity and long lasting performance BUILT-IN BEAD BREAKER SHOVEL 443-01274 443-18134 CORGHI TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-01274 443-18134 MFG. NO. A2024TI A2030 POWER SUPPLY 115V/1ph/60hz 115V/1ph/60hz CLAMPING 12"-26" 12"-28" OUTSIDE CLAMPING 10"-24" 10"-26" MAX TIRE OUTSIDE 40" 43" MAX RIM WIDTH 26" 28" GROSS SHIPPING WEIGHT 600 lb. 620 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT

SERVICE EQUIPMENT 291 AM50 LEVERLESS TIRE CHANGER AM500 AUTOMATIC TIRE CHANGER • Leverless design allows it to easily handle the toughest tire and wheel combinations in the market today • Dynamic bead breaking discs & newly designed head group provides fast & smooth operation • Leverless design allows it to easily handle the toughest tire and wheel combinations in the market today • Dynamic bead breaking discs & newly designed head group provides fast & smooth operation AM5000 TIRE CHANGER • The Touchless system keeps the working tools away from the wheel making OEM, Low Profile, and Run Flat tires simple, safe and fast to change • The wheel lift and helper arm are standard TOUCHLESS SYSTEM WHEEL LIFT & HELPER ARM "LEVA LA LEVA" (WITHOUT LEVER) CORGHI TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-05034 443-08234 443-18834 MFG. NO. AM50 AM500 AM5000 POWER SUPPLY 110V/1ph/50hz 110V/1ph/50hz 110V/1.31ph/50-60hz CLAMPING — — — OUTSIDE CLAMPING — — — MAX TIRE OUTSIDE 47" 47" 47" MAX RIM WIDTH 30" 32" 28" GROSS SHIPPING WEIGHT 760 lb. 980 lb. 1290 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

292 SERVICE EQUIPMENT AM26J ARTIGLIO MASTER TIRE CHANGER • The Touchless system keeps the working tools away from the wheel making OEM • Low profile, and run flat tires simple, safe and fast to change • The wheel lift and helper arm are standard • Dual bead breaker • Bead depressor AM28 ARTIGLIO MASTER TIRE CHANGER ARTIGLIO MASTER CODE TIRE CHANGER • The Touchless system keeps the working tools away from the wheel making OEM • New demounting tool head • Dynamic bead breaking device • Rapid demounting procedure • Universal wheel clamping system • Adjustable working height • Wheel lifter to effortlessly place wheels onto turntable • The Touchless system keeps the working tools away from the wheel making OEM • Automatic wheel dimension acquisition enabling automatic tool positioning • Touch screen system to guide user through all procedures and solutions • Compatible with all tire types ALL WITH TOUCHLESS TECHNOLOGY 443-16235 443-16234 443-08514 CORGHI TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-08514 443-16234 443-16235 MFG. NO. Mastercode AM26J AM28 POWER SUPPLY 110V/1.31ph/50-60hz 110V/1.31ph/50-60hz 230V/0.98 kW/50 Hz CLAMPING — — — OUTSIDE CLAMPING — — — MAX TIRE OUTSIDE 47" 40" 40" MAX RIM WIDTH 32" 26" 28" GROSS SHIPPING WEIGHT 1,675 lb. 1080 lb. 970 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT

SERVICE EQUIPMENT 293 A9222 SWING ARM TIRE CHANGER A9824 2-SPEED SWING ARM TIRE CHANGER • Turntable with two pneumatic cylinders capable of clamping any types of rim securely • Extractable pedal controls for easy inspection of control area • User-friendliness, reliability and high performance are the characteristics that make the A9222 ideal for users who need a versatile tool at an extremely competitive price • For passenger and light trucks • Built for high volume shops at an affordable price • Designed to handle passenger, light truck and motorcycle wheels A9830 2- SPEED SWING ARM TIRE CHANGER • Built for high volume shops at an affordable price • Designed to handle passenger, light truck and motorcycle wheels UNIQUE MOUNT/ DEMOUNT HEAD HEA TURNT 443-01764 443-92220 443-19004 CORGHI TIRE CHANGER SPECIFICATIONS INSIDE ASCOT NO. 443-92220 443-01764 443-19004 MFG. NO. A9222 A9824 A9830 POWER SUPPLY 110V/1ph 115V/1ph/60hz 115V/1ph/60hz CLAMPING 13"-25" 12"-26" 12"-28" OUTSIDE CLAMPING 10"-22" 10"-24" 10"-26" MAX TIRE OUTSIDE 42" 47" 47" MAX RIM WIDTH 3.5"-12.5" 26" 28" GROSS SHIPPING WEIGHT 760 lb. 600 lb. 635 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

294 SERVICE EQUIPMENT Tire Changer Accessories COATS REPLACEMENT AIR HOSE TIRE CHANGER LUBE BOTTLES AND SWABS • For use with Coats Tire Changers • 60" long x 1/4" diameter • AC-1 Euro-style chuck • All brass connectors • Swivel fitting • Packaged 1 per bag RIM CLAMP BEAD LIFTING TOOL • Designed f during the tir • 20" o from a dur vanadium ma ASCOT NO. MFG. NO. 444-81354 127-86871 LONG SOCK FOR BEAD LIFTING TOOL 844-16259 • High quality plastic sleeve prevents the rims from scratching while lifting the bead • Made from high quality, durable nylon • Ribbed design for anti-slip contact DESCRIPTION TC181354 Rim Clamp Bead Lifting Tool ASCOT NO. MFG. NO. DESCRIPTION 127-86871 86871-1 844-16572 HUNTER REPLACEMENT AIR HOSE • 60" long x ¼" diameter • European -style air chuck • All brass connectors • Packaged 1 per bag 60" x ¼" Coats Replacement Air Hose ASCOT NO. MFG. NO. DESCRIPTION 444-22019 220019 Long Sock for Bead Lifting Tool - 4 Pack LOW PROFILE BEAD LEVER TOOL 127-86872 ASCOT NO. MFG. NO. DESCRIPTION 437-00001 437-00002 437-00003 437-13014 844-16259 TS-1 TS-2 TS-3 313014 844-16572 106572 • Angled design and extra-long length provide increase leverage • Super-grip knurled handle for increase grip • Durable high strength carbon steel contruction • Reduces strain on user's hand and wrist • Provides technician better control of the tool against stiff side walls • Helps protect against damaging expensive wheels 11" OAL x 2" Swab Diameter 15" OAL x 2" Swab Diameter 18" OAL x 3" Swab Diameter 106259 Lube Bottle. Rim Clamp® Hunter-Style Tire Lubricating Brush . Fits RC-15, RC-20, 5060 and 5070 Series Tire Changers Lube Bottle. Center-Post. Fits 4040, 4040SA and 4050 Tire Changers ASCOT NO. MFG. NO. DESCRIPTION 127-86872 86872-1 Hunter Replacement Air Hose 444-99719 99719 Low Profile Bead Lever Tool BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT 437-13014 437-0001

SERVICE EQUIPMENT 295 'WING' MOUNT/DEMOUNT HEAD For use with Hunter tire changer • Molded wing guides the tire bead into the drop center • Prevents the tire from moving above the knuckle • Faster and easier mounting process ASCOT NO. MFG. NO. DESCRIPTION 444-01226 JRP11-8-11400327 'Wing' Mount/Demount Head ADAPTER KIT FOR 'WING' MOUNT/DEMOUNT HEAD Allows for compatibility with all Coats X-Series and RC Series tapered shaft • ADAPTER ONLY - Duckhead sold seperately • Lightweight aluminum design • Precision CNC manufactured ASCOT NO. MFG. NO. 444-01227 DESCRIPTION J760-424-B33CW Adapter Kit for 'Wing' Mount/Demount Head 444-01227 NYLON MOUNT/DEMOUNT HEAD ONLY Replacement For Accuturn 20024335 • Use With Models 7700, 8910, 8911, 8922, 8944, and 8989 • Replacement For Hofmann 20024335 • Replacement For FMC/John Bean EAA 24335 • For Use On EHP Series Tire Changers • Replacement For Snap-On 24335. For Use On All Models • Head Only ASCOT NO. MFG. NO. 444-01228 DESCRIPTION TC20024335 Nylon Mount/Demount Head Only 444-01229 BRACKET W/ HARDWARE FOR MOUNT/DEMOUNT KIT Bracket & Screw Kit for TC14024784 Duckhead kit • Facilitates conversion from metal head to plastic head • Pairs with TC20024335 Duckhead • Black steel construction • Bracket is reusable when Duckhead is replaced • Precision machined ASCOT NO. MFG. NO. DESCRIPTION 444-01229 TC200250000 Bracket w/ Hardware for TC14024784 Mount/Demount Head Kit NYLON TOOL HEAD FOR HUNTER TIRE CHANGERS Replacement For Hunter RP6-710014120 • For Use On TCA34 With Serial Number 664 And Above • Tool Head For Hunter TCA34 Tire Changers ASCOT NO. MFG. NO. DESCRIPTION 444-01230 TC14120 Nylon Tool Head for Hunter Tire Changers NYLON MOUNT/DEMOUNT HEAD FOR COATS, CORGHI & HUNTER TIRE CHANGERS Application chart below: OEM All Tool Coats Corghi Giuliano Part Number Tire Changer All models RC1, 5, 10, 15, 20 Early 5060, 9010, 9024, APX90 All rim clamp (optional accessory) 3008403 Hofmann 8314813 Hunter Sice 8314813 ASCOT NO. MFG. NO. 444-01222 TC450310 RP11-8314813 Shaft must be turned 180° for this head to work All earlier models except 1550, 1620, 1625 TCX Series (RP11-5-400-100 Adapter required) TCX500 Requires Upgrade Shaft & Adapter Kit M39, S40, S41, S42, S43, S45, S408MAXI, S435, S436, S436TOP DESCRIPTION Nylon Mount/Demount Head for Coats, Corghi & Hunter Tire Changers RED PLASTIC HUNTER MOUNT/DEMOUNT HEAD Larger channel for difficult wheels • Specifically designed for low profile tires For Hunter TCA34 tire changers • Application chart below: OEM Hunter Part Number Tire Changer 221-675-2 221-675-2-B ASCOT NO. MFG. NO. 444-01224 TCR343 DESCRIPTION Red Plastic Hunter Mount/Demount Head TC250, TC300, TC325, TC350, TC2000, TC3250, TC3500 TC250, TC300, TC325, TC350, TC2000, TC3250, TC3500 444-01222 444-01228 G3008403 83008403 450310 444-01230 444-01226 444-01224 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

296 SERVICE EQUIPMENT Tire Changer Accessories (cont.) NYLON MOUNT/DEMOUNT HEAD, COATS & HUNTER STYLES ASCOT NO. MFG. NO. DESCRIPTION 444-01220 444-01221 TC183061-A VT-1221 Nylon Mount/Demount Head (Coats Style) Nylon Mount/Demount Head (Hunter Style) 444-01220 GREY NYLON DUCKHEAD • Grey nylon mount/demount head kit for low profile tires • Use with difficult wheels • COMPATIBLE WITH THE COATS TIRE CHANGERS: 5030, 5040, 5050, 5060, 5065, 6050, 6060, 6065, 7050, 7055, 7060, 7065, 7655, 7660, 7665 444-01221 ASCOT NO. MFG. NO. 444-01223 DESCRIPTION TC184432 Grey Nylon Duckhead Kit for Coats Tire Changers STAINLESS STEEL DUCKHEAD FOR COATS TIRE CHANGERS • Tapered stainless steel mount/demount head used on many Coats tire changers • For steel wheels and high-volume shops dealing mostly with OEM passenger cars and light trucks • FOUND ON COATS MODELS: 5030, 5040, 5045, 5050, 5060, 5065, 5070, 6050, 6060, 6065, 7050, 7055, 7060, 7065, 7655, 7660, 7665, 70XEH1, 70XEH2, 70XEH3 • Includes the set screws for adjusting the angle ASCOT NO. MFG. NO. 444-01225 DESCRIPTION TC182788 Stainless Steel Duckhead for Coats Tire Changers 444-01225 PLASTIC RIM PROTECTORS FOR COATS STAINLESS STEEL MOUNT/DEMOUNT HEADS • Designed for COATS stainless steel mount/demount heads • Made from a durable plastic material to prevent marring or scratching • Available in packs of 2 or 12 444-82961, 444-82963 ASCOT NO. MFG. NO. 444-82961 444-82963 DESCRIPTION TI182961 TI182963 2-Pack of Plastic Rim Protectors for Coats Stainless Steel Mount/Demount Head 12-Pack of Plastic Rim Protectors for Coats Stainless Steel Mount/Demount Head BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT

SERVICE EQUIPMENT 297 CEMB Heavy Duty Tire Changers CM27T HEAVY DUTY TRUCK TIRE CHANGER • For tube and tubeless type tires used on over-the-road Class 8 commercial trucks and some off-road tractor tires and rims • The pivoting four-jaw clamping chuck aids as a wheel lift and prevents liabilities of manual truck tire changing by allowing the machine to perform all the heavy lifting and service work • Mobile cable control unit • Bi-directional rotation • Self centering universal wheel chuck • Rim pliers and rim lever standard MOBILE CABLE CONTROL UNIT SM56T HEAVY DUTY TIRE CHANGER • For tube and tubeless tires used on heavier off-road farm and commercial use tractors • Mobile cable control unit • Two speed hydraulic pump motor • Bi-directional rotation RIM PLIERS AND RIM LEVER • Self-centering four jaw clamping jaw drive system which doubles as a wheel lift • Rim pliers and rim lever standard 446-00027 MOBILE CABLE CONTROL UNIT 2-SPEED HYDRAULIC PUMP MOTOR RIM PLIERS AND RIM LEVER CEMB HEAVY DUTY TIRE CHANGER SPECIFICATIONS ASCOT NO. 446-00027 446-00056 MFG. NO. CM27T SM56T POWER SUPPLY 220 VAC 220 VAC RIM CLAMPING RANGE 13" - 27" 14" - 46" MAX TIRE OUTSIDE 63" 90.5" MAX TIRE WIDTH 30" 42" MAX TIRE WEIGHT 3300 lbs. 3300 lbs. BEAD BREAKER FORCE 4100 lbs. 6000 lbs. SHIPPING WEIGHT 1415 lbs. 2000 lbs. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

298 SERVICE EQUIPMENT Corghi Heavy Duty Tire Changers HD700 HEAVY DUTY TIRE CHANGER • For demounting and mounting inner tube and tubeless type tires for trucks, buses and industrial vehicles with annular groove or elastic ring type rims • Can be used to work easily on any rim size up to 26" HD1300 HEAVY DUTY TIRE CHANGER • Extremely compact dimensions for working with complete peace of mind on truck, agricultural machine and earth moving machine wheels • Features a sturdy and robust operated tool arm HD1300R HEAVY DUTY TIRE CHANGER (WIRELESS) FOR INNER TUBE & TUBELESS TYPE TIRES WIRELESS ANY RIM SIZE UP TO 26" COMPACT IN SIZE 504 • Extremely compact dimensions for working with complete peace of mind on truck, agricultural machine and earth ving machine wheels • Features a dy and robust operated tool arm 443-03514 CORGHI TIRE CHANGER SPECIFICATIONS ASCOT NO. 443-01804 443-03504 443-03514 MFG. NO. HD700 HD1300 HD1300R POWER SUPPLY 208 vac +/-10%,3 ph., 30 amp circuit 208 vac +/-10%,3 ph., 30 amp circuit 208 vac +/-10%,3 ph., 30 amp circuit MAX TIRE OUTSIDE 63" 86" 86" MAX RIM WIDTH 26" 56" 56" GROSS SHIPPING WEIGHT 1500 lb. 2450 lb. 2450 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT

SERVICE EQUIPMENT 299 MONSTERAGTT HEAVY DUTY TIRE CHANGER HD1400 HEAVY DUTY TIRE CHANGER • Semi-automatic tire changer • Capable of handling tire widths of up to 58" and a maximum wheel weight of 4189 lb. • Electrichydraulic operation • Fea STOP function, guaranteeing no savings while the machine is no • Significant reduction in strain • High protection of rims and tires • High performance • Maximum safety • Reliable universal application HD1800 HEAVY DUTY TIRE CHANGER • Works on mining, forestry and agricultural wheels and tires up to 118" and 6,600 lb. • Cordless remote ol • Automatic tool head HEAVY DUTY START & STOP FUNCTION MAXIMUM SAFETY 443-01504 ELECTRICHYDRAULIC OPERATION RIM & TIRE PROTECTION RIM & TIRE PROTECTION HEAVY DUTY CORDLESS REMOTE 443-00409 443-04002 CORGHI TIRE CHANGER SPECIFICATIONS ASCOT NO. 443-00409 443-04002 443-01504 MFG. NO. HD1400 HD1800 MonsterAGTT POWER SUPPLY 208 vac +/-10%,3 ph., 30 amp circuit 208 vac +/-10%,3 ph., 30 amp circuit 208 vac +/-10%,3 ph., 30 amp circuit MAX TIRE OUTSIDE 98.5" 118" 98" MAX RIM WIDTH 58" 50" 58" GROSS SHIPPING WEIGHT 2960 lb. 5350 lb. 3500 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

300 SERVICE EQUIPMENT CEMB Digital Wheel Balancers ER72 DIGITAL WHEEL BALANCER • Professional digital wheel balancer especially designed for tire dealers • Automatic Distance & Diameter Entry with Width Sonar (3D) • Fully automatic Spotter Laser System for best correction possible • Full-time accuracy with Static unbalance always displayed on screen • LED to light the work space inside the rim • New automatic arm to measure automatically diameters up to 30" • Standard locking with Quick Nut • Electromagnetic brake for easy weight placement • Available 110VAC or 220VAC • Wide working space • Direct selection ounces/grams • Optimization program for compensation of rim and tire unbalance • One Button Split & Hidden Weight Program ER75 DIGITAL WHEEL BALANCER • A high volume RFV diagnostic wheel balancer, which comes in two variations, uniquely uses advanced balancing features such as Dynamic AutoAdaptive with One-Plane Balancing and RFV measurement combined with HubMatch • All the best features from CEMB balancers are combined with HubMatch to ensure the assembly is round when rolling on the vehicle • The ER75TD is available with either manual locking or pneumatic locking • One Plane Balancing; Offers a single ideal correction plane, indicating the exact point within the rim where the wheel can be balanced. Minimizing both static and dynamic unbalance, using a single counterweight thus saving time • HubMatch® balancing clocks the RFV high point of the assembly to the vehicle hub before mounting it at the 12 o’clock position. WIDE WORKING SPACE EZ10 3D DATA ENTRY WHEEL BALANCER • Space-Saver wheel balancer • Exclusive direct weight placement 3D inner data entry arm uses 3D Virtual Sonar and AutoAdaptive enhancement software to provide a faster, higher quality wheel balance service • Eliminates the time and hassle of caliper rim width data entry • Motorized, fast 5-second average cycle time • High quality, robust design, extremely accurate balancing with a simple to use interface • Electro-magnetic brake holds wheel steady for easier weight placement • Handles steel and custom wheels with choice of clip-on, tape weight and hidden spoke modes up to 30” rim diameter • Great for small garages, repair shops or back up to larger machines • 110v, 50/60 Hz. SPACE 481-00072 481-00010 ELECTROMAGNETIC BRAKE 481-00075 ASCOT NO. MFG. NO. 481-00072 ER72 DESCRIPTION ER72 Digital Wheel Balancer ASCOT NO. MFG. NO. 481-00075 ER75 DESCRIPTION ER75 Digital Wheel Balancer ASCOT NO. MFG. NO. 481-00010 EZ10 DESCRIPTION EZ10 3D Data Entry Wheel Balancer BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT

SERVICE EQUIPMENT 301 CEMB Digital Wheel Balancers (cont.) C212 MOTORIZED DIGITAL TRUCK WHEEL BALANCER WITH PNEUMATIC LIFT • C212 balances steel & light alloy wheels of cars, light & heavy commercial trucks and bus thanks to a 40mm shaft and a large assortment of adaptors and cones standard • Pneumatic stationary brake useful during wheel mounting and counterweight application • Pedal operated pneumatic lift (soft type) enables excellent centering accuracy of the wheel on the shaft • Automatic Distance & Diameter Entry (2D) • Fully Automatic Cycle with Breaking • 51" wheel guard • Self-Diagnosis and Self-Calibration • MENUS FOR QUICK SELECTION OF THE FOLLOWING: Inches to millimeters, unbalanced thresholds 0.1 or 0.25 ounces (1 or 5g) • Direct selection ounces/grams • Optimization program for compensation of rim and tire unbalance • "Static" program—plus 4 ALU programs for PAX, light alloy or special shaped rims • One Button Split & Hidden Weight Program • Direct weight location program (no repositioning of stick-on weights) PNEUMATIC STATIONARY BRAKE C206 MOBILE HAND SPIN TRUCK WHEEL BALANCER FULLY AUTOMATIC CYCLE • Mobile Hand Spin Truck Wheel Balancer for cars and light & commercial trucks • C206 balances HD truck and bus tires as well as light truck and car tires • Portable for mobile service when 12VDC available • Automatic Distance & Diameter Entry (2D) • Standard lightweight battery pack for use when power not available • Self-Diagnosis and SelfCalibration • MENUS FOR QUICK SELECTION OF THE FOLLOWING: Inches to millimeters, unbalanced thresholds 0.1 or 0.25 ounces (1 or 5g) • Direct selection ounces/grams • Optimization program for compensation of rim and tire unbalance • "Static" program—plus 4 ALU programs for PAX, light alloy or special shaped rims • One Button Split & Hidden Weight Program • Direct weight location program (no repositioning of stick-on weights) PORTABLE FOR MOBILE SERVICE 481-00206 481-00212 ASCOT NO. MFG. NO. 481-00212 C212 DESCRIPTION Motorized Digital Truck Wheel Balancer with Pneumatic Lift ASCOT NO. MFG. NO. 481-00206 C206 DESCRIPTION Mobile Hand Spin Truck Wheel Balancer WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

302 SERVICE EQUIPMENT Corghi Wheel Balancers EM9250 LED DISPLAY WHEEL BALANCER • Compact design • More programs and features than competitive LED display units EM9280 MONITOR DISPLAY WHEEL BALANCER The display and weight tray. • Balancing with monitor, compact and essential with professional performance • LCD MONITOR: High resolution graphics and dedicated software • SMART-ARM: Electronic input of wheel diameter and distance with FSP function which automatically activates the balancing programs, avoiding keypad selection • AWD AUTOMATIC SENSOR (Auto width Device): For contactless measurement of wheel width • Quick and intuitive sensitivity calibration ET88 WHEEL BALANCER • Top-of-the-range balancing machine for truck wheels • Low balancing speed, optimization of average balancing speed • 7 ALU truck and car programs • Automatic acquisition of wheel/ machine distance • Adhesive weight application device • Stunning userfriendly graphic interface • Automatic wheel weight application position search • Visual wheel wobble inspection • Automatic identification of fitted wheel (truck/car) • OPT FLASH and 200kg lift with safety handle GREAT FOR TRUCK WHEELS The spin unit. OPT FLASH 443-09557 443-95207 CORGHI TIRE CHANGER SPECIFICATIONS ASCOT NO. 443-00088 443-95207 443-92801 MFG. NO. ET88WL EM9250 EM9280 POWER SUPPLY 230V-1ph-50hz 110V-1ph-60hz 110V-1ph-60hz MAX TIRE OUTSIDE 52" 44" 44" GROSS SHIPPING WEIGHT 562 lb. 350 lb. 380 lb. 443-00088 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT

SERVICE EQUIPMENT 303 Corghi Wheel Balancers (cont.) EM9550 PLUS LED DISPLAY WHEEL BALANCER • Larger design • More programs and features than competitive LED display units • Wheel dimension detection with digital gauge • Automatic wheel positioning • LED light to brighten the work area • Quick application of adhesive counterweights • Manual wheel clamping w/quick ring • DISPLAY PANEL: High resolution graphics • AWC (Auto Width Calculation): Reduced wheel data entry time with the AWC function which suggests the most probable width value • WEIGHT TRAY: Many large trays to house counterweights and various tools • Inclined front side for operator access • Space-saving wheel guard AUTO WHEEL POSITION EM9580 PLUS MONITOR DISPLAY WHEEL BALANCER WITH SONAR DISPLAY PANEL • Balancing with monitor, compact and essential with professional performance • LCD MONITOR: High resolution graphics and dedicated software • SMART-ARM: Electronic input of wheel diameter and distance with FSP function which automatically activates the balancing programs, avoiding keypad selection • AWD AUTOMATIC SENSOR (Auto Width Device): For contactless measurement of wheel width • Quick and intuitive sensitivity calibration • Sonar included SMART ARM LCD MONITOR 443-09557 443-09587 CORGHI TIRE CHANGER SPECIFICATIONS ASCOT NO. 443-09557 443-09587 MFG. NO. EM9550 EM9580 POWER SUPPLY 110V-1ph-60hz 110V-1ph-60hz MAX TIRE OUTSIDE 44" 44" GROSS SHIPPING WEIGHT 440 lb. 440 lb. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

304 SERVICE EQUIPMENT EM9980C PLUS DIAGNOSTIC WHEEL BALANCER • For passenger cars, light trucks and motorbikes • TOUCHLESS SYSTEM: High precision laser sensors automatically and quickly measure wheel dimensions • Automatic wheel positioning • Integrated led light illuminates the work area • Precision counterweight application • High-precision laser measurement of wheel run-out • Touchscreen Interface • USB ports for peripheral devices and software upgrades • MULTI-FUNCTION (ONE-TOUCH) BUTTON: Quick program selection • WEIGHT TRAY: Many large trays to house counterweights and tools • Spacesaving wheel guard • Inclined front side for operator access • Rear splash guard EYELIGHT PLUS DIAGNOSTIC WHEEL BALANCER • For passenger cars, light trucks and motorbikes • AUTOMATIC, PRECISE WHEEL CLAMPING: Reduces work time • TOUCHLESS SYSTEM: High precision laser sensors automatically and quickly measure wheel dimensions • Automatic wheel positioning • Integrated led light illuminates the work area • Precision counterweight application • High-precision laser measurement of wheel run-out • IPOS (Intelligent Positioning) • Touchscreen Interface • USB ports for peripheral devices and software upgrades • MULTI-FUNCTION (ONE-TOUCH) BUTTON: Quick program selection • WEIGHT TRAY: Many large trays to house counterweights and tools • Space-saving wheel guard • Inclined front side for operator access • Rear splash guard ET66 MOTOR DRIVEN BALANCER • Precise motor-driven balancer designed for heavy duty wheels and can also accommodate passenger wheels • Compact, easy to use and reliable • LED display provides ease of use, manual data entry and comes with dynamic, static, and alum programs • Low balancing speed reduces spin times • User-friendly keyboard 443-90201 HEAVY DUTY 443-09983 COMPACT & EASY TO USE CORGHI TIRE CHANGER SPECIFICATIONS ASCOT NO. 443-09983 443-01101 443-90201 MFG. NO. EM9980C Eyelightpls ET66 POWER SUPPLY 10V/220V 60hz 110V/200V 60hz 110V/1ph/60hz MAX TIRE OUTSIDE 44" 44" 52" GROSS SHIPPING WEIGHT 550 lb. 605 lb. 485 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT

SERVICE EQUIPMENT 305 Wheel Balancer Accessories HAWEKA QUICK PLATE TUNER TIP • Replacement Quick Tip for use with Haweka Quick Plate System • Replicates aftermarket wheel vehicle lug mount • Must be used on all aftermarket wheels for proper centering • Aftermarket tuner type Quick Tip • 58mm length, 19.5mm diameter ASCOT NO. MFG. NO. DESCRIPTION 483-27382 HW273E008 023 Haweka Quick Plate Tuner Tip 483-27382 HAWEKA HUB CENTERING SOLUTIONS HAWEKA QUICK PLATE STANDARD TIP – 38MM • Replacement Quick Tip for use with Haweka Quick Plate System • Replicates vehicle lug mount • Standard conical type Quick Tip, short • 38mm length, 24.5mm diameter ASCOT NO. MFG. NO. DESCRIPTION 483-27383 HW273E008 003 Haweka Quick Plate Standard Tip – 38mm 483-27383 HAWEKA QUICK PLATE STANDARD TIP – 58MM • Replacement Quick Tip for use with Haweka Quick Plate System • Replicates vehicle lug mount • Standard conical Quick Tip, long • 58mm length, 22.5mm diameter ASCOT NO. MFG. NO. DESCRIPTION 483-27385 HW273E008 025 Haweka Quick Plate Standard Tip – 58mm 483-27385 HAWEKA PRO CENTERING KIT VII HAWEKA QUICK PLATE BALL SEAT TIP • Replacement Quick Tip for use with Haweka Quick Plate System • Replicates vehicle lug mount • Ball seat type Quick Tip • 48mm length, 24.5mm diameter 483-40132 ASCOT NO. MFG. NO. DESCRIPTION 483-27387 HW273E008 007 Haweka Quick Plate Ball Seat Tip 483-27387 ASCOT NO. MFG. NO. 483-40132 DESCRIPTION HW150 400 132 Haweka Pro Centering Kit VII IMPROVED CENTERING ASCOT NO. MFG. NO. 482-25411 482-26460 482-26462 482-26463 482-26464 482-25491 483-40132 DESCRIPTION HW150 400 110 9 Piece Pro Collet Kit HW160 400 060 Ford Precision Collet HW160 400 062 Toyota Precision Collet HW160 400 063 Chrysler Precsion Collet 1 HW160 400 064 Chrysler Precsion Collet 2 HW150 400 091 Cone Kit 40mm: Light Truck HW150 400 132 Haweka Pro Centering Kit VII Note: All Hub Centering Products also available in 28, 36, 38mm except Duo Expert 483-40132 HAWEKA QUICK PLATE LAND ROVER TIP • Replacement Quick Tip for use with Haweka Quick Plate System • Specific vehicle lug mount replication for Land Rover applications • Land Rover type Quick Tip, short • 38mm length, 34.5mm diameter 483-27389 ASCOT NO. MFG. NO. 483-27389 DESCRIPTION HW273E008 009 Haweka Quick Plate Land Rover Tip WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

306 SERVICE EQUIPMENT Wheel Balancer Accessories (cont.) HAWEKA LUG CENTERING SOL HAWEKA KITS 483-99409 ASCOT NO. MFG. NO. 483-99409 482-25649 DESCRIPTION HW200 299 409 U.S. Flange Plate Kit 40mm HW210 400 002 Quick Plate Kit: 40mm 482-28147 Note: Flange Plates and Quick Plates also available in 28, 36, 38mm ASCOT NO. MFG. NO. 482-28147 482-28415 482-28414 HAWEKA STORAGE SOLUTIONS HAWEKA NEW PROMAX MD KIT – 40MM ASCOT NO. MFG. NO. 482-29895 DESCRIPTION HW900 008 205 Adapter Storage Stand 482-29895 • Professional Centering Solution for 8 and 10-lug medium duty applications • Combination of spring loaded and hub pilot discs provide professional mounting solution • One lug adapter with long plug-in studs for all MD applications • PROBLEM SOLVING SOLUTION FOR: Chevy/GMC 8x180 and 8x210 applications • PROBLEM SOLVING SOLUTION FOR: Ford 8x170, 8x200 and 10x225 applications • Problem solving solution for all 8x6.5 applications • Application chart for plate and collet look up by vehicle included HAWEKA MEDIUM DUTY WHEEL BALANCER ACCESSORIES PRO CENTERING KIT DESCRIPTION HW280 400 147 ProCentering System HW280 400 139 ProMax MD 40mm HW280 400 142 ProMax MD Standard 40mm APPLICATION CHART INCLUDED 482-21374 ASCOT NO. MFG. NO. 482-21374 482-27404 482-26447 482-26448 482-26467 482-29452 482-29460 482-29462 482-29471 482-28444 DESCRIPTION HW700 400 037 Medium Duty Flange Plate HW700 400 037 Medium Duty Five Arm Star HW160 400 047 Hub Pilot Sleeve 1 - 4.88/4.92" HW160 400 048 Hub Pilot Sleeve 2 - 5.59/6.69" HW160 400 067 Hub Pilot Sleeve 7 - 4.88/6.06" HW190 400 052 Hub Pilot Sleeve 3 - 5.46/5.25" HW190 400 060 Hub Pilot Sleeve 4 - 4.56" HW190 400 062 Hub Pilot Sleeve 5 - 4.6" HW190 400 071 Hub Pilot Sleeve 6 - 4.77" HW280 400 044 Universal Adaptor 8x6.5 483-40014 ASCOT NO. MFG. NO. DESCRIPTION 483-40014 HW280 400 142 Haweka New ProMax MD Kit – 40mm BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT

SERVICE EQUIPMENT 307 Wheel Balancer Accessories (cont.) HAWEKA QUICK NUTS AND PRESSURE CUPS STEEL PROGRIP QUICKNUT WITH HANDLES AND PRESSURE CUP • Essential wheel balancer tooling • Clamping device speeds wheel mounting process on balancers • Heavy duty steel design solution for Road Force balancers HEAVY Y STEEL DESIGN 483-24486 483-40806 ASCOT NO. MFG. NO. 483-24486 483-24433 483-25433 483-25403 483-25406 483-21982 483-29821 483-29827 DESCRIPTION HW124 408 006 Quick Nut Steel w/ Hood 40-8mm HW140 404 033 Quick Nut HD (metal) 40mm-4mm HW140 403 033 Quick Nut - 40mm - 3mm HW143 283 003 Quick Nut - 28mm - 3mm HW143 283 006 Quick Nut w/ Handles - 28mm - 3mm HW190 008 002 Pressure Cup - 5" HW190 008 021 Pressure Cup - 8" HW190 008 027 Quick Nut Pressure Ring Note: Quick Nuts are also availble for 28, 36, 38m ASCOT NO. MFG. NO. 483-40806 DESCRIPTION HW124 408 006 Steel ProGrip QuickNut 40 x 8 with Handles and Pressure Cup SOFTGRIP QUICKNUTS WITH HANDLES • Essential wheel balancer tooling • Upgraded threaded jaws with bigger bearing surface allows higher torque pressure • Softgrip clamping device will not open under load • New alloy metal jaws provides longer life for threaded jaws • Torque ring is ever present – removal not required for use with pressure cup • Heavier duty pressure cup • Lower overall housing height enables use with quick or flange plates on shorter shafts HAWEKA SOFT GRIP QUICK NUT - 40 X 8 • Improved design, essential wheel balancer tooling • New ergonomic design with soft-touch handle • New metal alloy threaded jaws last longer • Larger bearing surface allows for higher torque • Pressure ring is always attached to the quick nut (a must for quick plate/flange plate use) • Optimized glide prevents fast wear of the thread shaft • Redesigned, heavy duty pressure cup • Improved quick action mechanism prevents opening under load • Lower housing height for shorter shafts and larger profile wheels...always grabs the thread • Lighter weight, easier to handle due to lower housing height HEAVIER DUTY SOFTTOUCH HANDLE 483-40301 PRESSURE CUP HEAVY DUTY 483-40401 PRESSURE CUP 483-40801 NEW ALLOY METAL JAWS 483-40800 ASCOT NO. MFG. NO. 483-40800 DESCRIPTION HW125 408 000 Haweka Soft Grip Quick Nut – 40 x 8 ASCOT NO. MFG. NO. 483-40301 483-40401 483-40801 DESCRIPTION HW125 403 001 SoftGrip Quick Nut 40 x 3 with Handles HW125 404 001 SoftGrip Quick Nut 40 x 4 with Handles HW125 408 001 SoftGrip Quick Nut 40 x 8 with Handles WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

308 SERVICE EQUIPMENT PRESSURE CUP FOR HAWEKA SOFT GRIP QUICK NUTS PRESSURE RING FOR ALL PROGRIP QUICKNUTS • Must be used with rubber ring (HW190 008 005) • Works with all Soft Grip Quick Nuts (Not standard quick nuts) • Rigid, heavy duty design prevents flex during balancer spin • Long lasting, hard plastic composition • Snap Connects easily to Soft Grip Quick Nuts 483-08065 ASCOT NO. MFG. NO. 483-08065 DESCRIPTION HW190 008 065 Pressure Cup for Haweka Soft Grip Quick Nuts ASCOT NO. MFG. NO. 483-08027 • Pressure Ring must be present on ProGrip QuickNuts when using Quick or Flange Plates • Without the pressure ring, the clamping device does not provide enough torque pressure to press rim on cones/collets evenly and consistently eliciting inaccurate balancing results 483-08027 DESCRIPTION HW190 008 027 Pressure Ring for all ProGrip QuickNuts BACKING SPRING PROGRIP PRESSURE CUP • Pressure Cup for all ProGrip Quicknuts 40mm, 38mm, 36mm, 28mm • HW143 403 003, HW143 403 006, HW143 383 003, HW143 383 006, HW143 363 003, HW143 363 006, HW143 283 003, HW143 283 006, HW143 404 003, HW143 404 006, HW143 285 006, HW143 405 006, HW140 403 033, HW140 404 033 • Must be present on all balancers with open mid centering devices/hubs (Coats) • Without backing spring, wheels can only be front coned – not acceptable for proper balancing ASCOT NO. MFG. NO. 483-40015 DESCRIPTION HW190 400 015 Backing Spring 483-40015 UNIVERSAL SPACER & UNIVERSAL DONUT 483-08002 • Spacer provides necessary distance between mid centering device and cone/collet to prevent bottoming out and/or mid centering cup interference • Must use spacer with ProCollets 7-9 • Donut required for use with backing spring on open mid centering device balancers (Coats) ASCOT NO. 483-08002 MFG. NO. HW190 008 002 DESCRIPTION PROVIDES ProGrip Pressure Cup NECESSARY RUBBER COVER FOR 5" PRESSURE CUP • Provides rubberized protection between wheel rim and pressure cup 483-40045 483-08005 ASCOT NO. MFG. NO. 483-08005 DESCRIPTION HW190 008 005 Rubber Cover for 5” Pressure Cup ASCOT NO. MFG. NO. 483-08047 483-40045 483-40047 DESCRIPTION HW190E008 047 Universal Spacer HW190E008 045 Universal Donut HW190E400 045 Universal Donut - 40mm BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT

SERVICE EQUIPMENT 309 Wheel Balancer Accessories (cont.) NORTH AMERICAN FLANGE PLATE KIT 40MM • Replicates vehicle wheel lug mount on the balancer • Provides consistent, even pressure when mounting wheel on cones/collets for precision balancing results PRECISION DESIGNED TOYOTA PRECISION COLLET • Precision-designed, application-specific solution for balancing Toyota Truck wheels • Problem-solving precision collet for Toyota Tundra, Sequoia, Tacoma, 4Runner, FJ as well as Lexus SUV applications and more 483-99409 APPLICATION SPECIFIC 483-40060 ASCOT NO. MFG. NO. 483-99409 DESCRIPTION HW200 299 409 North American Flange Plate Kit 40mm ASCOT NO. MFG. NO. 483-40060 LIGHT TRUCK CONE KIT 40MM • Covers hub ranges 120mm174mm • Kit includes a cone and distance spacer • Works on all balancer makes and models with 40mm shaft 483-40091 ASCOT NO. MFG. NO. 483-40091 DESCRIPTION HW150 400 091 Light Truck Cone Kit 40mm DESCRIPTION HW160 400 062 Toyota Precision Collet FORD PRECISION COLLET • Precision-designed, application-specific solution for balancing Ford light truck and SUV applications • Problem-solving precision collet for Ford F150, Expedition and Lincoln Navigator applications PRECISION DESIGNED HAWEKA DUO COLLET SPACER – 40MM APPLICATION SPECIFIC • Provides spacer and additional strength between Duo Collets and MCD Spring • Recommended for use on Coats balancers ASCOT NO. MFG. NO. 483-40001 HW190 400 010 Haweka Duo Collet Spacer – 40mm 483-40001 DESCRIPTION 483-40062 ASCOT NO. MFG. NO. 483-40062 DESCRIPTION HW160 400 060 Ford Precision Collet WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

310 SERVICE EQUIPMENT Challenger Lifts CL10 SERIES 10,000 LB. CAPACITY TWO-POST LIFT COMPLETE PRODUCTIVITY: Conventional Power Controls, Versymmetric® offset 3-stage front and rear arms • Versymmetric® offset front arms provide directSPOT™ to vehicle lift points and safely lifts both symmetrically and asymmetrically within the same service bay maximizing service capabilities and revenue potential • Padded overhead shut off system prevents vehicle damage from being raised too high. • Oversized 5" diameter pulley and heavy duty 5/16" cable reduces stress on equalization system and increases cable life • Fully gusseted base plate design reduces column deflection. 48" elongated carriage design decreases load on bearing • Single point mechanical lock release system with jacket coated protection and no lock cable pulleys, and double clutch release bar protects cable from stretching while disengaging both column locks simultaneously • 11' 8" standard height with 2' and 3' extensions available allows lift to be placed in standard service bay with 12' ceiling • Rubber door guards provide added security against vehicle door damage Versymmetric Versymmetric 2 Lifts in One Why should you be forced to decide what type of vehicles you service the most? • Asymmetric Lifts accommodate 70% of top 20 selling vehicles, Symmetric Lifts accommodate 30% of the top 20 selling vehicles • Versymmetric® Lifts ASCOT NO. MFG. NO. 304-00010 CL10 DESCRIPTION CL10 Series: 10,000 lb. Capacity Two-Post Lift accommodate 100% of the top 20 selling vehicles, properly lifts cars, trucks, vans and SUVs with one lift CHALLENGER 2-POST LIFT SPECIFICATIONS ASCOT NO. MFG. NO. 304-00010 CL10 MAX. CAP. (LB.) 10,000 OVERALL WIDTH 11' 6-1/2" to 11' 11" BETWEEN COLUMNS 110" to 114-1/2" DRIVE-THRU WIDTH 100-1/2" to 105" OVERALL HEIGHT 11' 11" UNDER BAR CLEARANCE 11' 2-1/2" FRONT ARM LENGTH REAR ARM LENGTH 27" to 41" 42" to 59" MAX. LIFT HEIGHT 74-5/8" POWER REG. 2HP, Single Phase, 208V-230V BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT SYMMETRIC ON RIGHT SIDE, ASSYMMETRIC ON LEFT SIDE

SERVICE EQUIPMENT 311 Challenger Lifts (cont.) MAXIMUM PRODUCTIVITY (CL10V3) • Conventional Power Controls • Versymmetric® Plus offset 3-stage front + 3-stage rear arms • Adjustable overhead height can now be set at 11'2" (Standard height: 11'8") ASCOT NO. MFG. NO. 304-01102 DESCRIPTION CL10V3 Maximum Productivity 304-01102 NOW WITH ADJUSTABLE HEIGHT SA10: 10,000 LB. CAPACITY TWO-POST LIFT SYMMETRIC • Challenger’s SA10 2-post lift offers 10,000 lb. capacity • You can install the SA10 in either symmetric or asymmetric position, depending on your service needs • The SA10 also features adjustable height and width options to further customize it to meet your needs. Innovative 3-stage front and 2-stage rear arms provide greater overall sweep ASCOT NO. MFG. NO. 304-00210 SA10 DESCRIPTION SA10: 10,000 lb. Capacity Two-Post Lift 304-00210 OR ASYMMETRIC POSITION CHALLENGER 2-POST LIFT SPECIFICATIONS ASCOT NO. MFG. NO. MAX. CAP. (LB.) 304-01102 304-00210 CL10V3 SA10 10,000 10,000 OVERALL WIDTH 11' 6-1/2" to 11' 11" 129" to 137-1/2" BETWEEN COLUMNS 10" to 114-1/2" 106-3/4" to 137-1/2" DRIVE-THRU WIDTH 100-1/2" to 105" 92-3/4" to 94-1/2" OVERALL HEIGHT 11' 11" 136-1/2" to 142-1/2" UNDER BAR CLEARANCE 14' 2-1/2" 131-1/8" to 137-1/8" FRONT ARM LENGTH 19-13/16" to 42" 22-3/8" to 41-1/2" REAR ARM LENGTH 37-5/8" to 60" 38-1/4" to 59" MAX. LIFT HEIGHT 74-5/8" 74-1/2" POWER REG. 2HP, Single Phase, 208V-230V 2HP, Single Phase, 60Hz WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

312 SERVICE EQUIPMENT VLE10: 10,000 LB. CAPACITY TWO-POST LIFT WITH VERSYMMETRIC® TECHNOLOGY LE12: 12,000 LB. CAPACITY TWO-POST LIFT • 3-Stage Versymmetric® front arms and 2-Stage rear arms provide a wide arm sweep for asymmetric and symmetric lifting in the same service bay • 11.875” standard height fits in service bays with 12’ ceiling height • Double telescoping screw pads with rubber foot pad • Padded overhead shut-off system prevents vehicle damage • Jacketed pulley-less single-point mechanical lock release system that was once exclusive to our CL series lifts are now standard on the VLE10 • Rubber door guards protect vehicle from door damage • Premium powder coat finish provides long-lasting durability • Plated arm restraints and arm pins inhibit rust and provide long-lasting durability • Heavy-Duty 2-stage telescoping arms provide excellent reach and retraction to accommodate vehicle lifting points • 13'-10" or 14'-7" adjustable column height accommodates higher profile vehicles and provides maximum headroom to work underneath vehicles • HeavyDuty telescoping Screw Pads • Padded overhead shut off system • Single-point mechanical lock release system allows technician to disengage both column locks simultaneously • ALI/ETL certified 304-00111 304-00120 ASCOT NO. MFG. NO. 304-00111 VLE10 DESCRIPTION VLE10 Series: 10,000 lb. Capacity Two-Post Lift with Versymmetric® Technology CHALLENGER 2-POST LIFT SPECIFICATIONS ASCOT NO. MFG. NO. MAX. CAP. (LB.) 304-00111 304-00210 VLE10 LE12 10,000 10,000 OVERALL WIDTH 131.625" 139.75" ASCOT NO. MFG. NO. 304-00120 LE12 DESCRIPTION LE12 Series: 12,000 lb. Capacity Two-Post Lift BETWEEN COLUMNS 110.25" 115" DRIVE-THRU WIDTH 98.375" 103" OVERALL HEIGHT 143.875" to 167.875" 166" to 175" UNDER BAR CLEARANCE 137" 159.5" to 168.5" FRONT ARM LENGTH 22.3125" to 39.375" 35.75" REAR ARM LENGTH 38.375" to 55.375" 54.5" MAX. LIFT HEIGHT 74.75" 77.75" POWER REG. 208-230v Single Phase, 30-amp breaker 208-230v Single Phase, 30-amp breaker BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT

SERVICE EQUIPMENT 313 Challenger Lifts (cont.) CL12-LC: 12,000 LB. CAPACITY LOW CEILING TWO-POST LIFT W/ THREE STAGE ARMS • Service more vehicles and make more money with Challenger Lifts' new CL12-LC, 12,000 lb. capacity two post low ceiling lift • The new CL12-LC comes standard with 3-stage front and 3-stage rear arms providing the advantage of lifting many common cars, trucks, vans and SUVs within rated capacity CLFP9: 9,000 LB. CAPACITY FLOOR PLATE LIFT • 10'-7/8" overall column height is ideal for servicing vehicles in a low ceiling height • Low profile drive-over floor plate for easy vehicle positioning • 3-stage front + 3-stage rear arms provide excellent reach and retraction to lift a variety of vehicles • Electric/ hydraulic heavy-duty chain lifting operation with cable equalization • Dual point mechanical pull-lock cable release system SERVICE MORE VEHICLES 3-STAGE FRONT & REAR ARMS 304-00009 T NO. MFG. NO. 304-00009 CLFP9 DESCRIPTION 9,000 lb. Capacity Floor Plate Lift ASCOT NO. MFG. NO. 304-00121 CL12-LC DESCRIPTION CL12-LC: 12,000 lb. Capacity Low Ceiling Two-Post Lift w/ Three Stage Arms FRAME ENGAGING ADAPTERS ARE REQUIRED WHEN LIFTING TRUCKS OR OTHER FRAME VEHICLES. CHALLENGER 2-POST LIFT SPECIFICATIONS ASCOT NO. MFG. NO. 304-00009 304-00121 CLFP9 CL12-LC MAX. CAP. (LB.) 9,000 12,000 OVERALL WIDTH 11' 5-1/2" 142" BETWEEN COLUMNS 109" 114-1/2" DRIVE-THRU WIDTH 98-3/16" 103-1/2" OVERALL HEIGHT N/A 143" UNDER BAR CLEARANCE N/A 136" FRONT ARM LENGTH 24 1/2" to 44-1/2" 27-1/2" REAR ARM LENGTH 24-1/2" to 44-1/2" 59" MAX. LIFT HEIGHT 79-1/8" 80-1/4" POWER REG. 2HP, Single Phase, 60Hz 2HP, Single Phase, 60HZ WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

314 SERVICE EQUIPMENT 4115 SERIES: 15,000 LB. CAPACITY FOUR POST LIFTS •All-new and wider 22” runways • Open and closed front design for better ergonomics, allowing easy access to adjustment points on both standard or long length runway racks • Improved 4-wheel alignment wheelbase for extended alignment capabilities allowing you to service both long and short wheelbase vehicles • Louvered approach ramps prevent wheel-spin and are more effective than diamond tread or abrasive strips • Keep your shop looking stylish & clean with our new and improved all enclosed front column and crossbeam design • Expect a longer and smoother operational life with our UHMW internally encapsulated slide block • Compatible with the industry’s latest imaging alignment systems • 17 locking positions with improved lock design 4P14FEX & 4P14XFX: 14,000 LB. CAPACITY FOUR POST LIFT • The highest rise in the industry provides more working room underneath vehicles • Louvered approach ramps for positive vehicle traction • Solid piece column construction provides rigidity and stability • Oversized solid machined steel pulleys for prolonged pulley and cable life • Adjustable runways to accommodate a variety of tread widths • 14 level locking positions for a variety of general service tasks • ALI/ETL certified • OPTIONAL ACCESSORIES: 7,000 lb. rolling jacks for brake and tire work; Optional bolt on alignment kit converts general service application into alignment rack HIGHEST RISE IN THE INDUSTRY SOLID PIECE COLUMN 305-41150 NEW WIDER RUNWAYS MULTIPLE CONFIGURATIONS CHALLENGER 4-POST LIFT SPECIFICATIONS ASCOT NO. 305-41150 305-41151 305-41152 305-41153 305-41400 305-41401 MFG. NO. 4115EFO (Std, Open Front, Flat) 4115XFO (Ext., Open Front, Flat) 4115EFX (Std, Closed Front, Flat) 4115XFX (Ext., Closed Front, Flat) 4P14EFX 4P14FEX 15,000 15,000 15,000 14,000 14,000 MAX. CAP. (LB.) 15,000 OVERALL WIDTH Front: 142", Rear: 141.75 Front: 142", Rear: 141.75 141.75" 141.75" LENGTH OVERALL 250.75" 277" 247.625" 275.5" 10" 10' 3/4" 20" 4-1/2" 10" 10' 3/4" 20" 4-1/2" INSIDE COLUMNS Front: 120.75", Rear: 125.5" Front: 120.75", Rear: 125.5" 125.5" 125.5" 116" 116" HEIGHT OF COLUMNS Front: 99.25", Rear: 98" Front: 99.25", Rear: 98" 98" 98" 90-1/2" 90-1/2" HEIGHT OF RUNWAYS 7" 7" 7" 7" 7" 7" WIDTH OF RUNWAYS WIDTH BETWEEN RUNWAYS 22.375" 40.625" 22.375" 40.625" 22.375" 40.625" 22.375" 40.625" 20" 20" 40" - 43" 40" - 43" MAX. LIFT HEIGHT 78" 78" 78" 78" 78" 78" POWER REG. 208-230v 208-230v 208-230v 208-230v 208-230v 208-230v BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT

SERVICE EQUIPMENT 315 Challenger Lifts (cont.) EV1020: 10,000 LB. CAPACITY IN GROUND LIFT • Offset 3-stage front and rear safety arms • 87" drive through capacity • 50% more bearing contact than competitors increases stability • Stainless steel airlock release cylinder prevents rust NEW ADDITIONS: Larger 8-1/2" diameter chrome piston • Enhanced raised wiper at top and bottom of bearing provides better grease retention • Minimizes contamination from entering into bearings CLHM-140 AND CLHM-190: HEAVY DUTY MOBILE COLUMN LIFTS • Challenger’s heavy-duty mobile lifting system are robust, yet easily maneuverable and can be operated on almost any solid surface, indoors or out • Our heavy-duty mobile lifts are also capable of lifting vehicles of any axle length or wheelbase • Mobile lifts provide the flexibility and convenience to lift any rubber-tired vehicle, from small passenger cars to large 2-, 3- or 4-axle vehicles up to 152,000 pounds • Models are available in 14,000 lb. or 19,000 lb. capacity columns MOBILE LIFT 307-01021 (Lowered) 308-00140 87" DRIVE THROUGH CAPACITY The CHLM locks. 307-01021 (Raised) ASCOT NO. MFG. NO. 307-01021 EV1020 DESCRIPTION 10,000 lb. Capacity In Ground Lift ASCOT NO. MFG. NO. 308-00140 308-00190 DESCRIPTION CHLM 140-4 14,000 lb. Capacity Mobile Column Lift CHLM 190-4 19,000 lb. Capacity Mobile Column Lift The CHLM lifting system is conveniently wireless for a clutter-free work area. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE SERVICE EQUIPMENT

316 SERVICE EQUIPMENT MR6: 6,000 LB. CAPACITY MID-RISE LIFT • Portable mid-rise lift with Heavy-Duty tow dolly provides flexibility to service vehicles anywhere, inside or out • 7 locking positions allow technician to work at an ergonomic height to increase productivity and minimize fatigue • Electric motor mounted on tow dolly provides convenience and ease of maneuverability • Single push button power unit with release valve provides convenience when lifting and lowering vehicles • Slip-on rubber pad adapter kit with height extension accommodates high profile vehicles • Sliding/rotating arm design accommodates meeting pick-up points on a wider range of vehicles SRM10: 10,000 LB. CAPACITY SHORT-RISE LIFT • Standard with 4 two-position adapter blocks for increased vehicle spotting versatility • Standard storage trays are conveniently placed on each side of the lift to prevent lug nuts and other small parts from being misplaced • Dual cylinders provide stable 10,000 lb. lifting capabilities to accommodate a wide range of vehicles • Floor mounted diamond plated approach ramps help to prevent slipping • 3 locking positions • ALI/ETL certified The portable MR6 is easy to move around from one location to another as needed. PORTABLE AND EASY TO MOVE THREE LOCKING POSITIONS ASCOT NO. MFG. NO. 303-00010 SRM10 307-00006 ASCOT NO. MFG. NO. 307-00006 MR6 DESCRIPTION 6,000 lb. Capacity Mid-Rise Lift DESCRIPTION 10,000 lb. Capacity Short-Rise Lift BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT

SERVICE EQUIPMENT 317 Rubber Blocks & Lift Pads 309-0000 RUBBER LIFT PAD (5" ROUND) • RUBBER PAD DIMENSIONS: 5" round • Kit of four rubber pads • Replacement pads for Nussbaum lifts ASCOT NO. MFG. NO. 309-00003 JOK03M DESCRIPTION Rubber Lift Pad - 5" Round RUBBER JACK PADS FOR TESLA VEHICLES • Lifting jack pads for tesla models • Set of four in convenient carrying c • Protect the vehicle, battery and paint from damage • Can be used with floor jack or 2-post lifts • Top piece fits into designated factory lifting points RUBBER LIFT PAD (4" X 5") • RUBBER PAD DIMENSIONS: 4" x 5" • Kit of four rubber pads • Replacement pads for Ammco, Ben Pearson lifts ASCOT NO. MFG. NO. 309-00005 JOK05M DESCRIPTION Rubber Lift Pad - 4" x 5" 309-00005 RUBBER LIFT PAD (5" X 5") • RUBBER PAD DIMENSIONS: 5" x 5" • Kit of four rubber pads • Replacement pads for Forward, Worth, American, Gemini, Grand, Tuxedo, Eagle, Whip lifts ASCOT NO. MFG. NO. 309-00007 JOK07M DESCRIPTION Rubber Lift Pad - 5" x 5" 309-0000 RUBBER LIFT PAD (4" X 4") • RUBBER PAD DIMENSIONS: 4" x 4" • Kit of four rubber pads • Replacement pads for Challenger CL9 and CL10 lifts ASCOT NO. MFG. NO. 309-00009 JOK09O DESCRIPTION Rubber Lift Pad - 4" x 4" 309-00009 RUBBER LIFT PAD (3.25" X 4") • RUBBER PAD DIMENSIONS: 3.25" x 4" • Kit of four rubber pads • Replacement pads for Rotary SPO10, SPO12 lifts ASCOT NO. MFG. NO. 309-00022 JOK22D DESCRIPTION Rubber Lift Pad - 3.25" x 4" WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE ASCOT NO. MFG. NO. 309-00013 JORB-3 DES Rubber Lift Pad - 4" x 4" RUBBER BLOCK 3" • RUBBER BLOCK DIMENSIONS: 6" x 4" • Kit of four 3" rubber blocks • Spacer blocks for Rotary Airjacks and all Mid-Rise pad lifts 309-00013 RUBBER BLOCK 1.5" • RUBBER BLOCK DIMENSIONS: 6" x 4" • Kit of four 1.5" rubber blocks • Spacer blocks for Rotary Airjacks and all Mid-Rise pad lifts 309-00011 ASCOT NO. MFG. NO. 309-00011 DESCRIP JORB-1 Rubber Block 1.5” ASCOT NO. MFG. NO. DESCRIPTION 309-00404 TJP4 Rubber Jack P Tesla Vehicles - Set of 4 RUBBER LIFT PAD (5.25" ROUND) • RUBBER PAD DIMENSIONS: 5.25" round • Kit of four rubber pads • Replacement pads for Challenger CL10, Quality lifts ASCOT NO. MFG. NO. DESCRIPTION 309-00014 JOK14O Rubber Lift Pad - 5.25" Round 309-00014 SERVICE EQUIPMENT

318 SERVICE EQUIPMENT Rolling Jacks & Work Stations ROLLING JACKS • Optional 6,000 lb. and 7,500 lb. capacity rolling jacks allow easy access to brakes and wheels • Available for the 4P14 Series lifts • Air/ hydraulic operation • Adjustable width • Low vehicle drive-over clearance • Stackable height extensions with built-in storage rack • Factory installed and protected filter lubricator and regular ASCOT NO. MFG. NO. 218-00060 RJ6 309-61275 RJ7.5 DESCRIPTION Air/Hydraulic Operation, 40 Series and AR40 Series Air/Hydraulic Operation, For 4P14 and 4015 series lifts 218-00060 3-TON CAPACITY AIR / HYDRAULIC PUMP OPERATED ROLLING LIFT BRIDGE Used in quick lube pit applications or in conjunction with above ground lifts. The bridge straddles the lift rails and raises the vehicle’s tires off the rails for wheel alignment, brake, tire and suspension work. Push button air/hydraulic pump provides safe, quick lifting up to a height of 20-3/4”. ASCOT NO. MFG. NO. 218-79324 79324G DESCRIPTION 3-Ton Capacity Air / Hydraulic Pump Operated Rolling Lift Bridge 218-79324 AIR ELECTRIC WORK STATIONS • Air and Electric workstation with filter, lubricator and regulator for four post car and truck lifts • Increase productivity with air supply and electric outlets on the four post automotive lift column • Convenient power source for extension lights and other tools needed when servicing cars and trucks ASCOT NO. MFG. NO. 309-10264 B10264 309-99700 B99700 DESCRIPTION Air/Electric with Filter/Lubricator/Regulator for Two Post Lifts 309-10264 Tire Tool Manager Work Station with Filter Lubricator/Regulator INCREASES PRODUCTIVITY BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION SERVICE EQUIPMENT

319 Passenger Wheel Weights Truck Wheel Weights Adhesive Wheel Weights & Rolls Wheel Weight Displays & Kits Wheel Weight Tools Balancing Beads WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL BALANCING

320 WHEEL BALANCING Lead Passenger Wheel Weights AW: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Eagle, Geo, Isuzu, Oldsmobile, Plymouth & Pontiac EN: Acura, Audi, Ford Trucks, Honda, Mercedes & Volkswagen FN: Acura, Geo, Honda, Infiniti, Lexus, Nissan & Toyota IAW: AMC, Audi, BMW, Chrysler, Dodge, Eagle, Geo, Hyundai, Merkur, Mitsubishi, Nissan, Plymouth, Pontiac, Saab, Sterling, Subaru, Suzuki, Toyota, Volkswagen & Volvo AWN EN FN LH: Chrysler, Dodge & Plymouth MC: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Eagle, Ford, Lincoln, Mazda, Mercury, Mitsubishi, Oldsmobile, Plymouth, Pontiac & Satum APPLICATIONS: APPLICATIONS: FORD: All up to 1984; CHRYSLER: All up to 1989; GM: All up to 1987; decreasingly used from 1988-2000 NOTE: AWS = AWN = ALC AUDI: All from 1997; VW: All from 1997; used on many aftermarket alloy wheels with thin rim flanges NOTE: ENS = EN = ALCEN APPLICATIONS: TOYOTA: All since 1990; LEXUS: All since 1990; HONDA: All since 1989; ACURA: All since 1990; NISSAN: All since 1990; INFINITI: All since 1990; ISUZU: All since 1997; MAZDA: All since 1990; DAEWOO: All since 1999 NOTE: FNS = FN = ALCFN Available sizes: .025 oz - 3.00 oz (Coated or Uncoated) Quantity: 25/box (Coated), 50/box (Uncoated) IAW Available sizes: 10 g - 60 g (Coated) Quantity: 25/box LH Available sizes: 5 g - 80 g (Coated) Quantity: 25/box MCN APPLICATIONS: APPLICATIONS: AUDI: Up To 1996; VW: Up To 1996; BMW, CATERA, GEO HYUNDAI, JAGUAR, KIA, MITSUBISHI, SUBARU, SUZUKI, VOLVO NOTE: IAWS = IAW = ALCIW Available sizes: 5 g - 60 g (Coated or Uncoated) Quantity: 25/box Available sizes: .25 oz - 3.00 oz (Coated) Quantity: 25/box AUDI: All from 1997; VW: All from 1997; used on many aftermarket alloy wheels with thin rim flanges NOTE: LHS = LH = ALCLH APPLICATIONS: FORD: All from 1985; CHRYSLER: All from 1990 to 1997; some models changed to LHS in 1998; GM: Increasingly used starting in 1988; as of 2000 only C5 Corvette remains AWS NOTE: MCS = MCN = ALCMC Available sizes: .25 oz - 4 oz (Coated), .25 oz - 3 oz (Uncoated) Quantity: 25/box (Coated), 50/box (Uncoated) BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL BALANCING

WHEEL BALANCING Zinc Passenger Wheel Weights AW: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Eagle, Geo, Isuzu, Oldsmobile, Plymouth & Pontiac EN: Acura, Audi, Ford Trucks, Honda, Mercedes & Volkswagen FN: Acura, Geo, Honda, Infiniti, Lexus, Nissan & Toyota IAW: AMC, Audi, BMW, Chrysler, Dodge, Eagle, Geo, Hyundai, Merkur, Mitsubishi, Nissan, Plymouth, Pontiac, Saab, Sterling, Subaru, Suzuki, Toyota, Volkswagen & Volvo AWZ LH: Chrysler, Dodge & Plymouth MC: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Eagle, Ford, Lincoln, Mazda, Mercury, Mitsubishi, Oldsmobile, Plymouth, Pontiac & Satum T: Chevrolet, Ford, GMC & Lincoln P: Most common for steel wheels 321 ENZ FNZ IAWZ Plombco Perfect APPLICATIONS: FORD: All up to 1984; CHRYSLER: All up to 1989; GM: All up to 1987; decreasingly used from 1988-2000 APPLICATIONS: AUDI: All from 1997; VW: All from 1997; Used on many aftermarket alloy wheels with thin rim flanges APPLICATIONS: TOYOTA: All since 1990; LEXUS: All since 1990; HONDA: All since 1989; ACURA: All since 1990; NISSAN: All since 1990; INFINITI: All since 1990; ISUZU: All since 1997; MAZDA: All since 1990; DAEWOO: All since 1999 Available sizes: .025 oz - 3.00 oz Quantity: 25/box Available sizes: 5 g - 60 g Quantity: 25/box Available sizes: 5 g - 60 g Quantity: 25/box APPLICATIONS: AUDI: Up to 1996; VW: Up to 1996; BMW, CATERA GEO, HYUNDAI, JAGUAR, KIA, MITSUBISHI, SUBARU, SUZUKI, VOLVO Available sizes: 5 g - 60 g Quantity: 25/box LHZ MCZ PZ TZ APPLICATIONS: APPLICATIONS: CHRYSLER: Used on LH platform (Intrepid, Concorde, LHS, 300M) and all Mini Van models since 1998. Also used on 2000 Neon, 2001 PT Cruiser and 2001 Sebring & Stratus sedans and convertibles Available sizes: .025 oz - 3.00 oz Quantity: 25/box FORD: All from 1985; CHRYSLER: All from 1990 to 1997; some models changed to LHS in 1998; GM: Increasingly used starting in 1988; as of 2000 only C5 Corvette remains AWS Available sizes: .025 oz - 3.00 oz Quantity: 25/box APPLICATIONS: STANDARD PASSENGER CAR with 13” to 15” steel wheels APPLICATIONS: CHEVROLET: Full Size Pick Up, Suburban, Yukon, Tahoe from 2000; FORD: Expedition from 1997, F-100, F-150 from 1997; LINCOLN: Lincoln Navigator with alloy & steel wheels from 1998 Available sizes: .025 oz - 3.00 oz Quantity: 25/box Available sizes: .025 oz - 3.00 oz Quantity: 25/box WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL BALANCING

322 WHEEL BALANCING Steel Passenger Wheel Weights AW: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Eagle, Geo, Isuzu, Oldsmobile, Plymouth & Pontiac EN: Acura, Audi, Ford Trucks, Honda, Mercedes & Volkswagen FN: Acura, Geo, Honda, Infiniti, Lexus, Nissan & Toyota IAW: AMC, Audi, BMW, Chrysler, Dodge, Eagle, Geo, Hyundai, Merkur, Mitsubishi, Nissan, Plymouth, Pontiac, Saab, Sterling, Subaru, Suzuki, Toyota, Volkswagen & Volvo LH: Chrysler, Dodge & Plymouth MC: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Eagle, Ford, Lincoln, Mazda, Mercury, Mitsubishi, Oldsmobile, Plymouth, Pontiac & Satum T: Chevrolet, Ford, GMC & Lincoln P: Most common for steel wheels AWFE ENFE FNFE IAWFE APPLICATIONS: APPLICATIONS: FORD: All up to 1984; CHRYSLER: All up to 1989; GM: All up to 1987; decreasingly used from 1988-2000 AUDI: All from 1997; VW: All from 1997; Used on many aftermarket alloy wheels with thin rim flanges APPLICATIONS: TOYOTA: All since 1990; LEXUS: All since 1990; HONDA: All since 1989; ACURA: All since 1990; NISSAN: All since 1990; INFINITI: All since 1990; ISUZU: All since 1997; MAZDA: All since 1990; DAEWOO: All since 1999 Available sizes: .025 oz - 3.00 oz Quantity: 25/box Available sizes: 5 g - 60 g Quantity: 25/box Available sizes: 5 g - 60 g Quantity: 25/box APPLICATIONS: AUDI: Up to 1996; VW: Up to 1996; BMW, CATERA GEO, HYUNDAI, JAGUAR, KIA, MITSUBISHI, SUBARU, SUZUKI, VOLVO Available sizes: 5 g - 60 g Quantity: 25/box LHFE MCFE PFE TFE APPLICATIONS: APPLICATIONS: CHRYSLER: Used on LH platform (Intrepid, Concorde, LHS, 300M) and all Mini Van models since 1998. Also used on 2000 Neon, 2001 PT Cruiser and 2001 Sebring & Stratus sedans and convertibles Available sizes: .025 oz - 3.00 oz Quantity: 25/box FORD: All from 1985; CHRYSLER: All from 1990 to 1997; some models changed to LHS in 1998; GM: Increasingly used starting in 1988; as of 2000 only C5 Corvette remains AWS Available sizes: .025 oz - 3.00 oz Quantity: 25/box APPLICATIONS: STANDARD PASSENGER CAR with 13” to 15” steel wheels APPLICATIONS: CHEVROLET: Full Size Pick Up, Suburban, Yukon, Tahoe from 2000; FORD: Expedition from 1997, F-100, F-150 from 1997; LINCOLN: Lincoln Navigator with alloy & steel wheels from 1998 Available sizes: 5 g - 60 g Quantity: 25/box Available sizes: .025 oz - 3.00 oz Quantity: 25/box BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL BALANCING

WHEEL BALANCING Plasteel® Passenger Wheel Weights AWPS: Used on most domestic vehicles prior to 1995 with alloy wheels ENPS: Used on Mercedes, Audi & Volkswagen & many aftermarket alloy wheels with thin flanges IAWPS: Used on some European & Asian vehicles with alloy wheels FNPS: Used on most Japanese vehicles with alloy wheels MCPS: Used on most North American vehicles with alloy wheels TPS: Used on some light trucks & SUVs with alloy wheels PPS: Made to fit under hub caps on alloy wheels 323 AWPS ENPS FNPS IAWPS Available sizes: .025 oz - 3.00 oz Quantity: 25/box Available sizes: 5 g - 60 g Quantity: 25/box Available sizes: 5 g - 60 g Quantity: 25/box Available sizes: 5 g - 60 g Quantity: 25/box MCPS PPS TPS Available sizes: .025 oz - 3.00 oz Quantity: 25/box Available sizes: .025 oz - 3.00 oz Quantity: 25/box Available sizes: .025 oz - 3.00 oz Quantity: 25/box tested. proven. trusted. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL BALANCING

324 WHEEL BALANCING Heavy Duty Lead Truck Wheel Weights LT1 I7 TAL APPLICATIONS: APPLICATIONS: • For light trucks, 3/4 & 1 ton vehicles with either tube or tubeless rims where such rims are too thick for “P” series weights • For use on heavier trucks with thin rim flanges • Use “P” series weights on 1/2 ton vehicles • Use rim gauge RG2 to verify correct application NOTE: LT1 = BTS • Most popular weight for the medium duty truck • Used on most trucks with tube type tires NOTE: 17 = BTLM + E APPLICATIONS: • Special weight for all Alcoa and Accuride (from 1983) aluminum tubeless heavy truck wheels; fits both sides of the wheel • Replace the “OS-TAL” and “DS-TAL” series • Use rim gauge RG2 to verify correct application (either OS-TAL or DS-TAL slot) • Recommend coated weights on all vehicles having alloy wheels NOTE: TAL = BTCAL Available sizes: .5 oz - 6.00 oz Quantity: 25/box Available sizes: 1 oz - 16 oz Quantity: 25/box (10 & 12 oz: 20/box, 14 & 16 oz: 10/box) Available sizes: 2 oz - 8 oz Quantity: 25/box CT RC TS APPLICATIONS: APPLICATIONS: • Used on heavy duty trucks with Firestone or Accuride, Budd or Goodyear tubeless rims (except steel rims with curved edges) • Primarily used on rim widths of 6.75", 7.50" and 8.25" NOTE: CT = BTLT • Used on heavy duty trucks with Firestone or Accuride, Radial Commander rims • Can be used with new strip steel rims with curved edges • Use rim gauge RG2 to verify correct application NOTE: RC = BTRC APPLICATIONS: • All 1997 and newer Ford trucks with alloy and steel wheels use the “TS” series wheel weight • Many domestic trucks with decorative steel wheels, Ford truck new alloy wheels • New domestic full size trucks equipped with wheels using thicker flanges and chrome or powder coatings NOTE: TS = TN = TTC Available sizes: 2 oz - 16 oz Quantity: 25/box Available sizes: 2 - 12 oz Quantity: 25/box (10 & 12 oz: 20/box) Available sizes: .025 oz - 5 oz Quantity: 25/box BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL BALANCING

WHEEL BALANCING Zinc Truck Wheel Weights LT1Z I7Z TALZ 325 APPLICATIONS: APPLICATIONS: • For light trucks, 3/4 & 1 ton vehicles with either tube or tubeless rims where such rims are too thick for “P” series weights • For use on heavier trucks with thin rim flanges • Use “P” series weights on 1/2 ton vehicles • Use rim gauge RG2 to verify correct application NOTE: LT1 = BTS Available sizes: .5 oz - 5.00 oz Quantity: 25/box • Most popular weight for the medium duty truck • Used on most trucks with tube type tires NOTE: 17 = BTLM + E APPLICATIONS: • Special weight for all Alcoa and Accuride (from 1983) aluminum tubeless heavy truck wheels; fits both sides of the wheel • Replace the “OS-TAL” and “DS-TAL” series • Use rim gauge RG2 to verify correct application (either OS-TAL or DS-TAL slot) • Recommend coated weights on all vehicles having alloy wheels NOTE: TALS = TAL = BTCAL Available sizes: 1 oz - 8 oz Quantity: 25/box (10 & 12 oz: 20/box, 14 & 16 oz: 10/box) Available sizes: 1 oz - 6 oz Quantity: 25/box CTZ RCZ APPLICATIONS: APPLICATIONS: • Used on heavy duty trucks with Firestone or Accuride, Budd or Goodyear tubeless rims (except steel rims with curved edges) • Primarily used on rim widths of 6.75”, 7.50” and 8.25” NOTE: CT = BTLT • Used on heavy duty trucks with Firestone or Accuride, Radial Commander rims • Can be used with new strip steel rims with curved edges • Use rim gauge RG2 to verify correct application Available sizes: 2 oz - 6 oz Quantity: 25/box Available sizes: 2 - 6 oz Quantity: 25/box (10 & 12 oz: 20/box) WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL BALANCING

326 WHEEL BALANCING Lead Adhesive Wheel Weights PERFECT QUIKSTIK™ SEGMENTED LEAD WHEEL WEIGHTS • Only pre-cut pre-taped weight • Each segment is stamped with the actual weight in ounces and grams • Available in 1/2", 3/4" low profile and 3/4" truck weight design • Wheel weight for racing/off road performance applications PLOMBCO LEAD ADHESIVE WHEEL WEIGHTS • Available with rubber tape or cold weather tape • Cold weather tape: Save time and money by eliminating the need to heat the wheel when temperatures are below 40 degrees fahrenheit 312 484-11360 314 484-13360 412 484-00006 484-30360 612 ASCOT NO. MFG. NO. DESCRIPTION 484-00112 ASCOT NO. MFG. NO. 484-11360 484-10720 484-00012 484-13360 484-30360 484-00006 484-00112 100360 100720 200624S 200624 300360 CL6 CL12 WEIGHT DESCRIPTION PERFECT LEAD ADHESIVE 3 Oz. 3 Oz. 3 Oz. 3 Oz. 6 Oz. 6 Oz. 12 Oz. Pre-Taped Weight 30 Strips of .25 Oz. Segments Pre-Taped Weight 60 Strips of .25 Oz. Segments Pre-Taped Weight 48 Strips of .25 Oz. Segments Pre-Taped Weight 52 Strips of .25 Oz. Segments Pre-Taped Truck Weight 30 Strips of 1 Oz. Segments Pre-Taped Truck Weight 30 Strips of 1 Oz. Segments Pre-Taped Truck Weight 8 Strips of 2 Oz. Segments 484-31230 484-31252 484-31430 484-41215 484-41230 484-51215 484-61215 484-31231 484-31233 484-31432 484-33252 484-41232 484-53215 484-63215 PLOMBCO LEAD ADHESIVE: RUBBER TAPE 312-30 312-52 314-30 412-15 412-30 512-15 612-15 30 - 6" Bars - 1/4 Oz. Segments - 3/4" Wide 52 - 6" Bars - 1/4 Oz. Segments - 3/4" Wide 30 - 6" Bars - 1/4 Oz. Segments - 1/2" Wide 15 - 6" Bars - 1/2 Oz. Segments - 3/4" Wide 30 - 6" Bars - 1/2 Oz. Segments - 3/4" Wide 15 - 6" Bars - 1 Oz. Segments - 3/4" Wide 15 - 6" Bars - 2 Oz. Segments - 1-1/4" Wide PLOMBCO LEAD ADHESIVE: COLD WEATHER TAPE 312-30BCW 30 - 6" Bars - 1/4 Oz. Segments - 3/4" Wide, Black 30 - 6" Bars - 1/4 Oz. Segments - 3/4" Wide 30 - 6" Bars - 1/4 Oz. Segments - 1/2" Wide 52 - 6" Bars - 1/4 Oz. Segments - 3/4" Wide 30 - 6" Bars - 1/2 Oz. Segments - 3/4" Wide 15 - 6" Bars - 1 Oz. Segments - 3/4" Wide 15 - 6" Bars - 2 Oz. Segments - 1-1/4" Wide 312-30CW 314-30CW 312-52CW 412-30CW 512-15CW 612-15CW BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL BALANCING

WHEEL BALANCING 327 Steel Adhesive Wheel Weights STEEL SEGMENTED WHEEL WEIGHTS • Pre-cut weights • No cutting, no pre-contouring and no waste • Each segment is stamped with the actual weight in ounces • US white “quick” tape PERFECT QUIKSTIK™ SEGMENTED STEEL WHEEL WEIGHTS • Only pre-cut, pre-taped weight • No cutting, no pre-contouring and no waste • Each segment is stamped with the actual weight in ounces and grams 484-16001 484-00300 484-17127 484-20576 484-27026 484-30336 484-37026 ASCOT NO. MFG. NO. 484-16001 484-17026 484-17127 484-27026 484-37026 1184 14308 12187 14308W 14308B DESCRIPTION STEEL ADHESIVE 1 Oz. Steel Adhesive Wheel Weights: 1 Oz. Strips, 4 Segments (18 Strips per Box) 1/4 Oz. Steel Adhesive Wheel Weights with Plastic Powder Coating: 1/4 Oz. Strips, 8 Segments (30 Strips per Box) 1/2 Oz. Steel Adhesive Wheel Weights: 1/2 Oz. Strips, 7 Segments (18 Strips per Box) 1/4 Oz. White Steel Adhesive Wheel Weights with White Powder Coating: 1/4 Oz. Strips, 8 Segments (30 Strips per Box) 1/4 Oz. Black Steel Adhesive Wheel Weights with Black Powder Coating: 1/4 Oz. Strips, 8 Segments (30 Strips per Box) STEEL ADHESIVE WHEEL WEIGHTS ASCOT NO. MFG. NO. • USA “Easy Peel” tape • Tape on top 484-10101 DESCRIPTION BLACK STEEL ADHESIVE 484-10101 484-10201 484-10301 484-67026 484-77026 484-10100 484-10102 484-10200 484-10300 484-10400 FSF101B FSF102B FSF103B 24308B 34308B FSF101C FSF101CP FSF102C FSF103C FSF104C 1/4 Oz. Adhesive Wheel Weight: 3 Oz. (48 Strips per Box) 1/2 Oz. Adhesive Wheel Weight: 3 Oz. (48 Strips per Box) 1 Oz. Adhesive Wheel Weight: 4 Oz. (48 Strips per Box) 1/2 Oz. Adhesive Wheel Weight: 3.5 Oz. Strip (18 Strips per Box) 1 Oz. Adhesive Wheel Weight: 4 Oz. Strip (18 Strips per Box) STEEL ADHESIVE 1/4 Oz. Adhesive Wheel Weight: 3 Oz. (48 Strips per Box) 1/4 Oz. Adhesive Wheel Weight: 3 Oz. (48 Strips per Box) - Paper Backing 1/2 Oz. Adhesive Wheel Weight: 3 Oz. (48 Strips per Box) 1 Oz. Adhesive Wheel Weight: 4 Oz. (36 Strips per Box) 2 Oz. Adhesive Wheel Weight: 6 Oz. (18 Strips per Box) 484-10102 484-10201 484-00300 484-00060 484-20624 484-20576 484-22576 484-30224 484-31360 ASCOT NO. MFG. NO. SSG060N 200624ST 200576FE 200576FEBLK 300224FE 300360ST DESCRIPTION PERFECT QUIK-STIK™ STEEL ADHESIVE SST300N Pre-Taped Steel Weight - 3 Oz. Segments Pre-Taped Steel Weight - 60 Gram Segments Pre-Taped Steel Weight - 3 Oz. Segments Pre-Taped Steel Weight - 3 Oz. Segments (No QuikTAB™ feature.) Pre-Taped Black Steel Weight - 3 Oz. Segments (No QuikTab Feature) Pre-Taped Steel Wheel Weight - 4 Oz. Segments (28 Strips per box) Pre-Taped Steel Weight - 6 Oz. Segments 484-10301 484-10400 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL BALANCING

328 WHEEL BALANCING Steel Adhesive Wheel Weights PLOMBCO STEEL ADHESIVE WHEEL WEIGHTS 484-28408 484-41226 484-28418 484-48312 484-28428 484-48322 484-31234 484-50615 ASCOT NO. 484-32230 484-32252 484-41226 484-30836 484-28408 484-28418 484-28428 484-31234 484-31500 484-31501 484-35320 484-40848 484-41500 484-41501 484-42010 484-48312 484-48322 484-50615 484-52001 484-52312 MFG. NO. 312Fe-30CW 312Fe-52CW 412Fe 308Fe-36 408FE-28 VL408FES-28 VL408FEB-28 312Fe-30 VL315FEB VL315FES 320Fe 408Fe-48 VL415FEB VL415FES 420Fe VL312FES-48 VL312FEB-48 506Fe-15 520Fe 312FE-52 TAPE TYPE DESCRIPTION PLOMBCO STEEL ADHESIVE Cold Weather Cold Weather OE Adhesive Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base Rubber Base 30 * 6" Bars Precut in .25 Oz. Segments of .75" Wide 52 * 6" Bars Precut in .25 Oz. Segments of .75" Wide 6", Bars Precut in .5 Oz. Segments of .75" Wide 2 Oz. strips (1/4 Oz..) (36 Strips per Box) Steel Adhesive Wheel Weight: 4 Oz. (28 Strips per Box) Value Line Steel Adhesive Wheel Weight: 4 Oz. (28 Strips per Box) Value Line Black Steel Adhesive Wheel Weight: 4 Oz. (28 Strips per Box) Steel Adhesive Wheel Weight: 3 Oz. (30 Strips per Box) Value Line Black Steel Adhesive Wheel Weight Roll: 15 lb., 1/4 Oz. Segments Value Line Steel Adhesive Wheel Weight Roll: 15 lb., 1/4 Oz. Segments Steel Adhesive Wheel Weight Roll: 20 lb., .25 Oz. Segments 408Fe-48 Steel Adhesive Wheel Weight: 4 Oz. (48 Strips/Box) Value Line Black Steel Adhesive Wheel Weight Roll: 15 lb., 1/2 Oz. Segments Value Line Steel Adhesive Wheel Weight Roll: 15 lb., 1/2 Oz. Segments Steel Adhesive Wheel Weight Roll: 20 lb., .50 Oz. Segments Value Line Steel Adhesive Wheel Weight: 3 Oz. (48 Strips per Box) Value Line Black Steel Adhesive Wheel Weight: 3 Oz. (48 Strips per Box) Steel Adhesive Wheel Weight: 6 Oz. (15 Strips per Box) Steel Adhesive Wheel Weight Roll: 20 lb., 1 Oz. Segments Steel Adhesive Wheel Weight: 3 Oz. (52 Strips per Box) BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL BALANCING

WHEEL BALANCING 329 Steel Adhesive Wheel Weight Rolls & Accessories PERFECT STEEL ADHESIVE WHEEL WEIGHT ROLLS • Familiar design: Features all of the same standard steel QuikStik characteristics • Only use the amount of weight you need each time you balance • Simply pull and rip • No cutting and no measuring • MADE IN THE USA ADHESIVE WHEEL WEIGHT ROLLS • Simply use the amount of weight you need each time you balance • Convenient pull and rip design • No cutting and no measuring • Rolled weights are more efficient and help reduce waste • Plastic coated • US white “quick” tape 484-47026 ASCOT NO. MFG. NO. DESCRIPTION 484-21576 484-47026 484-57026 484-32360 ASCOT NO. 484-03200 484-07500 484-21576 484-21624 484-32360 MFG. NO. SST32000N SSG7500N 200576FER 200624STR 300360STR DESCRIPTION PERFECT STEEL ROLLS .25 Oz. (1280 Segments) 5G (1500 Segments) 0.25 Oz. (704 Segments) .25 Oz. (1280 Segments) .5 Oz. (640 Segments) ALL-METAL CONSTRUCTION HOLDS 3 ROLLS ADHESIVE ROLLS: ZINC OR STEEL 145KG 245KG 5 kg Steel Adhesive Wheel Weight Roll: 1/4 Oz. Segments (700 Segments per Roll) 5 kg Zinc Adhesive Wheel Weight Roll: 5G Segments (1000 Segments per Roll) PLOMBCO STEEL ROLLS ASCOT NO. MFG. NO. 320Fe 484-42010 484-52001 420Fe 520Fe ADHESIVE WHEEL WEIGHT ROLL S DESCRIPTION PLOMBCO STEEL ROLLS: RUBBER TAPE 484-35320 20 lb. Roll - 1272 Segments (1/4 Oz.) 20 lb. Roll - 640 Segments (1/2 Oz.) 20 lb. Roll - 320 Segments, (1 Oz.) • All-metal construction • Accommodates three rolls • Floor mount • Easy to assemble ASCOT NO. MFG. NO. 486-31281 WWR-3 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL BALANCING

330 WHEEL BALANCING Wheel Weight Displays and Kits METAL WHEEL WEIGHT RACK • All-metal construction • 8 shelves • Includes dividers • 64 weight locations • Square tube to support the rack EMPTY DISPLAY FOR PROFESSIONAL WHEEL WEIGHT KIT • EMPTY RACK ONLY 486-31280 ASCOT NO. MFG. NO. DESCRIPTION 486-31280 MFR Metal Wheel Weight Rack ASCOT NO. MFG. NO. 486-00880 Kit 80 Empty Display for Professional Wheel Weight Kit DESCRIPTION BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL BALANCING

WHEEL BALANCING 331 Wheel Weight Tools PREMIUM HEAVY DUTY PROFESSIONAL WHEEL WEIGHT HAMMER • Heavy duty construction • Black coated handles with red highlight • Designed for use on coated wheel weights • Will not mark alloy wheels • Replaceable plastic head available • Made in Taiwan ASCOT NO. MFG. NO. 486-33580 486-33581 486-33584 DESCRIPTION 3358 3358-B 335804 Premium Heavy Duty Wheel Weight Hammer - Red Premium Heavy Duty Professional Wheel Weight Hammer - Black Replacement Head HEAVY DUTY ADHESIVE WHEEL WEIGHT REMOVAL TOOL • Light weight and easy to use • Easy and quick to remove stick-on wheel weights without damaging rims • The plastic cover of the jaws can protect the alloy rims from damaging or scratching • Adjustable jaws for different types and sizes of wheel weights • Replacement plastic tips available separately ASCOT NO. MFG. NO. DESCRIPTION 486-00044 P4 486-00144 P4R Heavy Duty Adhesive Wheel Weight Removal Tool Replacement Tips for P4 (2-Pack) PREMIUM FIBERGLASS WHEEL WEIGHT HAMMER • Used to easily install and remove all types of steel and zinc clip-on wheel weights • Standard with large replaceable hook for prying • Fiberglass shaft for added durability • The hook is made from cold rolled steel • The striking face has a non-marring, surface protective medium-hard replaceable tip • Slip-resistant, ergonomic grip reduces arm strain & fatigue • MADE IN THE USA ASCOT NO. MFG. NO. DESCRIPTION 486-11000 486-11002 486-11004 486-11005 P110 P110-2 P110-4 Premium Fiberglass Wheel Weight Hammer Replacement Small Hook for Premium Wheel Weight Hammer Replacement Tip for Premium Wheel Weight Hammer 8884254 Replacement Large End for P-110 Wheel Weight Hammer HEAVY DUTY TRUCK WHEEL WEIGHT HAMMER • Will handle with ease the removal and attachment of HD truck weights • Fiberglass shaft for a lifetime of use • New chromalloy hooks designed for large wheels and large weights • Larger 1.75" tip for easier application along with heavier total tool weight require less striking effort • Longer handle provides added reach on larger wheels...comfortable, durable rubber handle • Use on all truck wheels • New industry standard • 12" total length • WEIGHT: 2 lbs. • MADE IN THE USA ASCOT NO. MFG. NO. DESCRIPTION 486-11011 486-11005 486-11006 P110-T 15156 Heavy Duty Truck Wheel Weight Hammer 8884254 Replacement Large End for P-110 Wheel Weight Hammer Replacement Tip for Premium Wheel Weight Hammer COATED WHEEL WEIGHT HAMMER • Protects valuable wheels from damage • Features replaceable plastic head ASCOT NO. MFG. NO. DESCRIPTION 486-00233 486-00133 P-3B P-3H Soft Head Wheel Weight Hammer Replacement Head for P-3B Wheel Weight Hammer 486-11005 486-00233 486-00133 486-11006 11005 486-11011 486-00044 486-33584 486-33580 QUALITY WHEEL WEIGHT TOOLS WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL BALANCING

332 WHEEL BALANCING Wheel Weight Tools (cont.) SPECIALTY WHEEL WEIGHT HAMMERS ASCOT NO. MFG. NO. 486-07129 486-51480 51400 51480 DESCRIPTION Truck Wheel Weight Hammer Deluxe Wheel Weight Hammer (Made of heat strengthened steel, comfortable vinyl handle grips, nylon durable hammer replaceable tip) PASSENGER CAR WHEEL WEIGHT HAMMER • The industry standard for passenger car wheel weight tools • Not for use on alloy or chrome wheels ASCOT NO. MFG. NO. DESCRIPTION 486-00011 P-1 Economy Chrome Wheel Weight Hammer 486-07129 EURO STYLE WHEEL WEIGHT HAMMER • Heavy Commercial Duty Design • Coated Handles for Comfort • Nickel Plated Vanadium ASCOT NO. MFG. NO. 486-00222 P-2C DESCRIPTION Euro-Style Wheel Weight Hammer 486-00222 HEAVY DUTY ADHESIVE WHEEL WEIGHT REMOVERS • For use with stick-on wheel weights: Removes emblems, body side moldings and stick-on wheel weights • Scrape off stickers without scratching paint or glass and gaskets from aluminum parts • One piece composite construction can be hit with a hammer • Knobbed handle to prevent hand from slipping while removing wheel weights • Made of high impact plastic • Resharpen with a file when needed ASCOT NO. MFG. NO. 486-71510 486-71511 71510 71511 DESCRIPTION Red Heavy Duty Adhesive Wheel Weight Scraper Black Heavy Duty Adhesive Wheel Weight Scraper 486-71510 RIM GAUGES • Convenient and economical gauges that guide you to the correct wheel weight application • Helpful with alloy wheels and thinner high strength steel wheels that have numerous new rim configurations ASCOT NO. MFG. NO. 486-75001 486-75002 RGP1 RG2 DESCRIPTION Rim Gauge For Passenger Cars Rim Gauge For HD Trucks 486-75001 486-71511 486-75002 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL BALANCING

WHEEL BALANCING 333 Counteract Balancing Beads • Perfect balance - perfect wear • Clean, trouble free balancing micro-beads provide continuous self-adjusting balance • No clumping • Just open the outside package and throw the inside bag into the tire • Method allows the use of an air blaster to seat the tire on the rim without contaminating the seating area • Air blaster pressure inside the tire will collapse the bag containing Counteract Balancing Beads or the package will break open and release its contents soon after driving • Available in application sizes from half ton vehicles to heavy trucks • All packaging is color coded to tire size on application chart PERFECT BALANCE & WEAR NO CLUMPING Just open the outside package and throw the inside bag into the tire! ASCOT NO. MFG. NO. 451-00013 451-00203 451-00204 451-00205 451-00206 451-00208 451-00210 451-00212 451-00214 451-00216 DESCRIPTION CBB-IP-LG 3 Oz. BP 4 Oz. B 5 Oz. B 6 Oz. B 8 Oz. B 10 Oz. B 12 Oz. B 14 Oz. B 16 Oz. B Injector Pump for Balancing Beads 3 Oz. Bag in Bag 4 Oz. Bag in Bag 5 Oz. Bag in Bag 6 Oz. Bag in Bag 8 Oz. Bag in Bag 10 Oz. Bag in Bag 12 Oz. Bag in Bags 14 Oz. Bag in Bag 16 Oz. Bag in Bag QTY./CASE N/A 96 92 76 64 52 40 36 32 28 INCREASE TIRE LIFE IMPROVE FUEL ECONOMY TPMS COMPATIBLE REDUCE VIBRATIONS TROUBLE FREE ENVIRONMENTALLY FRIENDLY REDUCE MAINTENANCE COSTS GUARANTEED WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL BALANCING

334 WHEEL BALANCING ECO BALANCE • Economical, high quality balancing bead, small enough to be injected through the valve stem COUNTERACT ATV/UTV DIY WHEEL BALANCING KITS • Each DIY kit comes with everything you need to balance your tires at home in your garage • Pre-measured bags of Counteract Balancing Beads for your tire size • Includes valve cores, valve caps, valve core remover, injection bottle and hose • KITS H, I, J: 40 kits per case • KITS K, L, M N: 14 kits per case ECO BALANCE XL • A large balancing bead solution designed for use with extreme balancing conditions, vehicles and tires, but compatible with all applications • No need for a special valve core • Pre-measured bags include ECO branded valve cores ASCOT NO. MFG. NO. 451-01203 451-01204 451-01206 451-01208 451-01210 451-01212 451-01214 451-01216 451-00603 451-00604 451-00606 451-00608 451-00610 451-00612 451-00614 451-00616 451-00618 451-00620 3 Oz. BP-EB 4 Oz. B-EB 6 Oz. B-EB 8 Oz. B-EB 10 Oz. B-EB 12 Oz. B-EB 14 Oz. B-EB 16 Oz. B-EB ECOXL3OZ ECOXL4OZ ECOXL6OZ ECOXL8OZ ECOXL10OZ ECOXL12OZ ECOXL14OZ ECOXL16OZ ECOXL18LB ECOXL20OZ DESCRIPTION QTY./CASE ECO BALANCE (1 MM BEAD SIZE) 3 oz. Bag in Bag 4 oz. Bag in Bag 6 oz. Bag in Bag 8 oz. Bag in Bag 10 oz. Bag in Bag 12 oz. Bag in Bag 14 oz. Bag in Bag 16 oz. Bag in Bag ECO BALANCE XL (2.55 - 3 MM BEAD SIZE) 3 oz. Bag in Bag 4 oz. Bag in Bag 6 oz. Bag in Bag 8 oz. Bag in Bag 10 oz. Bag in Bag 12 oz. Bag in Bag 14 oz. Bag in Bag 16 oz. Bag in Bag 18 lb. Bucket 20 oz. Bag in Bag 96 92 64 52 40 36 32 28 96 92 64 52 40 36 32 28 N/A 24 ASCOT NO. MFG. NO. 451-04042 451-04223 451-04043 451-04044 451-04046 451-04048 451-04410 Kit H Kit I Kit J Kit K Kit L Kit M Kit N DESCRIPTION 4 x 2 Oz. with Kit 2 x 2 Oz./2 x 3 Oz. with Kit 4 x 3 Oz. with Kit 4 x 4 Oz. with Kit 4 x 6 Oz. with Kit 4 x 8 Oz. with Kit 4 x 10 Oz. with Kit QTY./CASE 40 40 40 14 14 14 14 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL BALANCING

WHEEL BALANCING 335 COUNTERACT MOTORCYCLE DEALER PACKS COUNTERACT MOTORCYCLE DIY KITS • Each kit contains pre-measured bags, plastic bottle with hose for installation, valve caps and cores, along with a valve core remover cap • Each dealer bag contains 4 pre-measured bags of Counteract Motorcycle Balancing Beads • Includes 4 valve cores & 4 valve caps • Typically for shop use but may also be sold at a retail level for DIY customers looking for replacement product 451-05001 MK1OZ 451-03011 Kit A 451-03012 Kit B 451-05002 MK2OZ 451-03022 Kit D 451-03034 Kit J 451-05003 MK3OZ ASCOT NO. MFG. NO. 451-03011 451-03012 451-03013 451-03022 451-03023 451-03233 451-03223 451-03224 451-03232 451-03034 Kit A Kit B Kit C Kit D Kit E Kit F Kit G Kit H Kit I Kit J DESCRIPTION 1 oz (2) 1 oz (1) & 2 oz (1) 1 oz (1) & 3 oz (1) 2 oz (2) 2 oz (1) & 3 oz (1) 2 oz (1) & 3 oz (2) 2 oz (2) & 3 oz (1) 2 oz (4) 2 oz (2) & 3 oz (2) 3 oz (4) QTY./CASE 40 40 40 40 40 40 40 40 40 40 ASCOT NO. MFG. NO. 451-05001 MK1OZ 451-05002 451-05003 MK2OZ MK3OZ DESCRIPTION QTY./CASE 4 x 1 Oz. pre-measured bags 160 Applications (40 Dealer Bags) 4 x 2 Oz. pre-measured bags 128 Applications (32 Dealer Bags) 4 x 3 Oz. pre-measured bags 96 Applications (24 Dealer Bags) WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL BALANCING

336 WHEEL BALANCING EQUAL FLEXX™ Tire Balancing IMI EQUAL FLEXX is an adaptive, internal wheel-end balancing solution that reduces fuel and tire costs by reducing vibration from the wheel end. Developed in partnership with the foremost experts in vibration analysis and testing, its soft, dry particles are engineered to continuously balance tires, creating a smoother ride and more even tire wear for the life of the tire. FLEXX will never damage the tire casing, wheel, or TPMS units. It does not void tire manufacturer warranties. TPMS TMC COMPATIBLE COMPLIANT BEFORE INSTALLING, READ THE QUANTITY CHART. SIMPLY DROP THE FLEXX BAG INTO THE TIRE BEFORE MOUNTING. DO NOT TEAR OR OPEN BAG. MOUNT THE TIRE ON THE WHEEL, INFLATE AND ADJUST THE AIR PRESSURE OF THE TIRE. INSTALL FILTERED VALVE CORE & IDENTIFICATION SLEEVE AVOID OVER-LUBRICATING BEAD OR INSTALLING FLEXX IN TIRES WITH SEALANT. CONTENTS ARE NON-TOXIC, ENVIRONMENTALLY SAFE & NON-FLAMMABLE. ™ 2X MORE VIBRATION ABSORPTION POWER LOWEST ROLLING RESISTANCE ASCOT NO. MFG. NO. 451-32016 451-40004 451-40006 451-40008 451-40010 451-40012 451-40016 DESCRIPTION EQFXWC32 EQFXEC40 EQFXCC40 EQUAL FLEXX Drop In Bag (32) W pkgs. ( 16 Oz.) EQUAL FLEXX Drop In Bag (40) E pkgs. ( 4 Oz.) EQFXDC40 EQUAL FLEXX Drop In Bag (40) D pkgs. (6 Oz.) EQUAL FLEXX Drop In Bag (40) C pkgs. (8 Oz.) EQFXBC40 EQUAL FLEXX Drop In Bag (40) B pkgs. ( 10 Oz.) EQFXAC40 EQUAL FLEXX Drop In Bag (40) A pkgs. ( 12 Oz.) EQUAL FLEXX Drop In Bag (40) F pkgs. ( 3 Oz.) EQFXFC40 PRODUCTIVITY SMOOTHER RIDE FUEL COST TIRE WEAR BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION WHEEL BALANCING

WHEEL BALANCING 337 MAGNUM+ Tire Balancing MAGNUM+ BALANCING COMPOUND • An advanced technology dry tire balancing compound, with superior tire balancing properties • Formulated from specially-processed multiple-density materials • Provides continuous and lasting tire balancing for standard, low-profile and wide-base medium truck tires and heavy duty light truck tires • No more timeconsuming and expensive mechanical balancing, perfect self-adjusting balance in all your tires, less vehicle wear and tear, easier maintenance and less driver fatigue MAGNUM+ FLEET TUBS • Each tub is labeled and packaged for a specific premeasured insert bag • Bulk discounts apply to each tub size • Tubs are durable and reusable with a resealable lid • Complete with a full color label, tubs look great in retail settings and on delivery trucks • Eliminates wasted extra packaging and tubs are recyclable 451-72305 451-00200 LASTING TIRE BALANCE PERFECT SELFADJUSTING BALANCE ASCOT NO. MFG. NO. SAMPLE TIRE SIZE LT215/75/R15 451-00150 451-00200 451-00250 451-00300 451-00400 451-00500 451-06000 451-07000 LTP150 LTP200 MTP250 MTP300 MTP400 MTP500 DPP600 DPP700 LT235/85R16 33x12.50R15 245/75R22.5 11R22.5/11R24.5 12R24.5 365/80R22.5 425/65R22.5 QTY./CASE 36 24 24 18 12 12 6 6 ASCOT NO. 451-10003 451-15405 451-20605 451-25805 451-31005 451-40013 451-60021 451-72305 RANGE LFP100 INSERT™ LFP150 INSERT™ LFP200 INSERT™ MFP250 INSERT™ MFP300 INSERT™ MFP400 INSERT™ DFP600 INSERT™ DFP700 INSERT™ NOM. WT. 3 Oz. DESCRIPTION Fleet Tub – Contains 24 LTP100 4-1/2 Oz. Fleet Tub – Contains 24 LTP150 6-1/2 Oz. Fleet Tub – Contains 24 LTP200 8-1/2 Oz. Fleet Tub – Contains 22 MTP250 10-1/2 Oz. Fleet Tub – Contains 18 MTP300 Fleet Tub – Contains 14 MTP400 Fleet Tub – Contains 6 DPP600 13 Oz. 21 Oz. 23-1/2 Oz. Fleet Tub – Contains 6 DPP700 QTY./CASE 24 24 24 22 18 14 6 6 RESEALABLE LID TUBS CAN BE RECYCLED WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE WHEEL BALANCING

339 Alignment Tool Assortments Camber/Caster Tools Heavy Duty Alignment Automotive Alignment Equipment WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE ALIGNMENT

340 ALIGNMENT Alignment Tool Assortments PASSENGER CAR ASSORTMENT BOARD SET • Board set includes the most popular shims, cam kits and adjustable strut plates • A “must have” for any shop performing 4 wheel alignments on passenger cars • Shipped with high-strength polymer display board • CONTAINS ONE OF EACH OF THE FOLLOWING: 26012, 26014, 82380, 82385, 82390, 86250, 86325, 86350, 86375, 87385, 87420, 87500, 87520 ASCOT NO. MFG. NO. 251-88260 88260 DESCRIPTION 1-88260 Passenger Car Assortment Board Se A MUST HAVE FOR ANY SHOP INCLUDE DISPLAY BOARD 251-88270 LIGHT TRUCK/SUV SLEEVE ASSORTMENT BOARD SET • This great new board set includes the most popular parts for aligning today’s trucks and SUVs. Don’t be caught without the part that you need • Shipped with the polymer display board • CONTAINS ONE OF EACH OF THE FOLLOWING: 66050, 66025, 66037, 72055, 81250, 81260, 81270, 81280, 81290, 84120, 87365 ASCOT NO. MFG. NO. 251-88270 88270 DESCRIPTION Light Truck/SUV Sleeve Assortment Board BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION ALIGNMENT

ALIGNMENT Camber/Caster Terms & Definitions ALIGNMENT TERMS for CAMBER DEFINITION Inward or outward tilt of the top of the wheel PURPOSE Adjustment centers the vehicle’s load on tire, eliminating pull. Proper adjustments reduce camber tire wear and pulling METHODS OF ADJUSTMENT (1) Shims; (2) Cams; (3) Slotted Frame; (4) Strut Rod; (5) Wedges; (6) Ball Joint Rotation; (7) Offset Bearing Plates; (8) Cam Bolts; (9) Eccentrics; (10) Offset Ball Joints 0 CAMBER When wheel and tire assembly are in exact vertical position POS. CASTER POS. CAMBER When the top of the wheel and tire assembly is tilted out, or away from the engine NEG. CAMBER The top of the wheel and tire assembly is tilted in toward the engine NEG. CASTER ALIGNMENT TERMS for CASTER DEFINITION The forward or backward tilt of the upper ball joint, or top of the strut, relative to the lower ball joint PURPOSE Caster affects steering stability and steering wheel returnability METHODS OF ADJUSTMENT (1) Shims; (2) Cams; (3) Slotted Frame; (4) Strut Rod; (5) Strut Rotation; (6) Cradle Movement; (7) Offset Ball Joint; (8) Sliding Ball Joint 0 CASTER The upper ball joint or top strut bearing and lower ball joint are in the same plane as viewed from the side of the vehicle The upper ball joint or top strut bearing is toward the rear of the vehicle in relation to the lower ball joint as viewed from the side of the vehicle The upper ball joint or top strut bearing is toward the front of the vehicle in relation to the lower ball joint as viewed from the side of the vehicle 341 ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE ALIGNMENT

342 ALIGNMENT Camber/Caster Tools FORD 4WD CAMBER/CASTER SLEEVE SET • Change camber, caster or both at the same time. Remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve • To adjust camber/caster, the sleeve may be lifted and rotated 1/8 turn • Sized in 1/4˚ increments through 2˚ • One sleeve covers one side of the vehicle • ESTIMATED INSTALLATION TIME: .5 hr/side ASCOT NO. MFG. NO. 231-23100 23100 DESCRIPTION APPLICATIONS Complete Set FORD 4WD: 1980 & Up F250, F350, E250, E350, Full Size Bronco w/Ball Joints, 1980-96 F150, F250 (L/D) FORD & DODGE CAMBER/CASTER SLEEVE SET • Sleeves change camber, caster or both at the same time • Remove the upper ball joint stud nut and break taper free between the stud and sleeve • Calculate the change and install correct sleeve • Sized in 1/4˚ increments • One sleeve covers one side of the vehicle • ESTIMATED INSTALLATION TIME: .5 hr/side ASCOT NO. MFG. NO. 231-23130 23130 DESCRIPTION Complete Set APPLICATIONS DODGE: 1994-99 BR2500 4WD, BR3500 2WD/4WD Ford 4WD: 1992 & Up F350 Crew Cab Pickup, Some F250 4WD w/ Straight Axle, 1999 & Up Super Duty 250, 350, 450, 550 231-23130 231-23100 23220 & 23230 SLEEVE SETS • Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on the new 4x4 F250 and F350 Super Duty trucks ASCOT NO. MFG. NO. 231-23220 23220 231-23230 23230 DESCRIPTION APPLICATIONS Complete Set FORD 4WD: 2005 & Up F250, F350 Super Duty; FORD RWD: 2005 & Up F250, F350 Solid Axle/Coil Spring Complete Set FORD RWD/4WD: 2005 & Up F450, F550 Coil Springs; CHEVY/ GMC 4WD: 2005 & Up Kodiak K4500, Topkick K5500 231-23220 FORD 2 & 4WD CAMBER/CASTER TRUCK SLEEVES • Sleeves are widely used to adjust caster and/or camber on many Ford 2WD/4WD trucks • To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present • Sleeves allow for larger caster and camber changes which may be required on lowered and raised trucks • SET INCLUDES: Nine of the XRTM Camber/Caster truck sleeves ASCOT NO. MFG. NO. 231-23180 23180 DESCRIPTION APPLICATIONS Complete Set FORD 2WD:1987 & Up F350, 1987-96 F150, F250 (L/D), 198990 Bronco II, 1992 & Up E150, E250, E350, 1991-94 Explorer, 1989 -97 Ranger, 1999 & Up F250, F350 Super Duty; MAZDA 2WD:1991-97 Navajo, Pickup; Ford 4WD:1991-94 Explorer, 1990 - 97 Ranger; MAZDA 4WD:1991-97 Navajo, Pickup BALL JOINT PRESS SLEEVES • These specially designed sleeves make installation of the #23510-40 ball joints easy and profitable for the installer • Sleeves are designed to match the angle of the yoke on the axle housing to insure proper ball joint ASCOT NO. MFG. NO. 231-23580 23580 DESCRIPTION Bushing Sleeves For Ball Joints 23510, 23520, 23530, 23540 231-23580 231-23230 231-23180 BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION ALIGNMENT

ALIGNMENT 231-87385 F150/250 (L/D) 2/4WD CAMBER/CASTER KIT ASCOT NO. MFG. NO. DESCRIPTION 231-87385 87385 F/150/250, 2/4WD Camber Caster Kit APPLICATIONS FORD: 1997-03 F150, F250 (L/D), 1997-02 2WD & 4WD Expedition; LINCOLN: 1997-02 2WD & 4WD Navigator 343 GM 2WD & 4WD CAMBER/CASTER KIT ASCOT NO. MFG. NO. 231-87400 87400 GM 2/4WD Camber Caster Kit DESCRIPTION APPLICATIONS 231-87400 GM: 1988-99 1500, 2500, 3500 C & K series 2WD/4WD trucks, 1990 & up Safari AWD Van; CHEVROLET: 1990 & up Astro AWD Van GM 2WD & 4WD CAMBER/CASTER KIT ASCOT NO. MFG. NO. 231-87500 87500 Ford Explorer Camber/ Caster Set DESCRIPTION APPLICATIONS FORD: 1995-01 2WD & 4WD Explorer, 1998 & up 2WD & 4WD Ranger; MERCURY: 1995-01 2WD & 4WD Mountaineer; MAZDA: 1998 2WD & 4WD B-Series Pickup 231-87500 EXPLORER CAMBER/CASTER KIT • Set of 4 cams for quick installation without having to remove the upper control arm bolt ASCOT NO. MFG. NO. DESC. 231-87310 87310 Explorer Camber/ Caster Kit APPLICATIONS FORD: 1995-01 2WD & 4WD Explorer, 1998-02 2WD & 4WD Ranger; MERCURY: 1995-01 & up 2WD & 4WD Mountaineer; MAZDA: 1998 2WD & 4WD B-Series Pickup DODGE TRUCK CAMBER/CASTER KITS • KIT INCLUDES: 4 cam and bolt sets to cover both sides of the vehicle ASCOT NO. MFG. NO. 231-23755 23755 231-23765 23765 DESCRIPTION Dodge Camber/Caster Kit, 4 Wheel Drive Dodge Camber/Caster Kit, 2 Wheel Drive APPLICATIONS DODGE: 2002 & Up 1500 Series - 4 Wheel Drive DODGE: 2002 & Up 1500 Series - 2 Wheel Drive 231-87310 231-23755 EZ-CAM™ XR - CAMBER KITS FOR DOMESTIC/IMPORT TWO BOLT STRUTS (PAIR) • Designed for non-slotted struts • EACH KIT CONTAINS: Two cam Bolt assemblies, enough for both sides of the vehicle ASCOT NO. MFG. NO. 223-81240 81240 DESCRIPTION Camber Kits for Domestic/ Important Two Bolt Struts (Pair) APPLICATIONS 223-81240 ALFA ROMEO, FIAT, LANCIA ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE ALIGNMENT

344 ALIGNMENT Camber/Casters Tools (cont.) JEEP AND DODGE OFFSET BALL JOINT • Offset ball joint replaces the O.E. upper ball joint to provide up to 2° camber/caster change on several previously non-adjustable Jeep and Dodge vehicles • Comes with an installation template for accurate change ASCOT NO. MFG. NO. 237-23510 DESCRIPTION 23510 237-23520 237-23530 237-23540 23520 23530 23540 1/2˚ Positive Or Negative Change 1˚ Positive Or Negative Change 1-1/2˚ Positive Or Negative Change 2˚ Positive Or Negative Change APPLICATIONS JEEP: 1984 & up 2WD/4WD Cherokee, Comanche, 1987 & up Wrangler; 1990 & up Renegade, 1984 & up 2WD/4WD downsize Wagoneer; 1993 & up Grand Cherokee, DODGE: 1994 -2001 BR1500 4WD & BR2500 (L/D) Pickups 237-23520 FORD F150 KIT • Easily adjust camber and caster on F150s from ‘04 and up (including late model) and ‘07 & up Expeditions ASCOT NO. MFG. NO. 231-86250 231-86250 86250 DESCRIPTION Ford F150 Kit APPLICATIONS FORD: 2004 & Up F150, 2007 & Up Expedition; LINCOLN: 2006 & Up Mark LT, 2007 & Up Navigator DODGE CASTER / PINION ANGLE CAM 222-823 • Whether the truck is lifted or stock ride height, optimize caster and pinion angles for better tracking and axle/drive shaft position ASCOT NO. MFG. NO. 222-82395 DESCRIPTION 82395 Dodge Caster / Pinion Angle Cam 222-8 NISSAN CAM BOLT KIT • FRONT ADJUSTMENT RANGE: Camber/Caster ±2.00 degree • 1 kit per wheel required ASCOT NO. MFG. NO. DESCRIPTION 222-87520 87520 Nissan Cam Bolt Kit TOYOTA BOLT KIT • FRONT ADJUSTMENT RANGE: Camber/Caster ± 1.50 degree • 1 kit per wheel required ASCOT NO. MFG. NO. Toyota Bolt Kit APPLICATIONS 222-25430 222-25435 222-25440 222-25445 25430 25435 25440 25445 TOYOTA 4WD: 1995-04 Tacoma; TOYOTA RWD: 1998-04 Tacoma PreRunner; TOYOTA 4WD&RWD: 1996-02 4-Runner LEXUS AWD: 2003-09 GX; TOYOTA RWD: 2005 & up Tacoma PreRunner; TOYOTA 4WD: 2005 & Up Tacoma; TOYOTA 4WD&RWD: 2007-09 FJ Cruiser, 2003-09 4Runner LEXUS AWD: 2010 & Up GX; TOYOTA 4WD&RWD: 2010 & Up FJ Cruiser, 2010 & Up 4Runner TOYOTA: 01-07 Sequoia, 99-06 Tundra BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION ALIGNMENT

ALIGNMENT 345 HONDA CIVIC ADJUSTABLE CONTROL ARM • The arm is built with SPC's xAxis™ sealed flex joint to reduce compliance • Its' unique adjustment design permits on car adjustment of ±3˚ camber • REAR ADJUSTMENT RANGE: Camber ± 3.0° • REQUIRED: 1 per wheel ASCOT NO. MFG. NO. 222-67475 67475 DESCRIPTION Honda Civic Adjustable Control Arm HONDA/ACURA EZ ARM XR™ ASCOT NO. MFG. NO. ADJUSTMENT RANGE 226-67030 226-67230 67030 67230 -2.00˚ To +3.40˚ APPLICATIONS ACURA: Integra; HONDA: Civic, Del Sol, CRV, CRX -4.00˚ To +6.00˚ 2001 and up Civic HYUNDAI/KIA REAR EZ ARM XR™ • Provide up to ±2º camber and toe change • REAR ADJUSTMENT RANGE: Camber and Toe ±2.00° • 1 per wheel required ASCOT NO. MFG. NO. 226-67410 DESCRIPTION 67410 Hyundai/ Kia Rear EZ Arm XR™ HONDA EZ ARM XR™ • Adjustment range: -2.00° to +4.00° • NOTE: An O.E. style ball joint is integrated in this arm ASCOT NO. MFG. NO. 226-67090 DESCRIPTION 67090 226-67290 67290 Honda/Acura EZ Arm XRTM Honda EZ Arm XRTM APPLICATIONS HONDA: 1998-2002 Accord; ACURA: 2001 3.2CL, 1999-2002 3.2TL 1996 & Up 3.5RL ACURA: 2001-06 MDX, 2004-08 TSX; HONDA: 2003-07 Accord, 199904 Odyssey, 2003-08 Pilot 222-62010 HONDA FRONT CAMBER/CASTER CONTROL ARM • O.E. style control arm now makes it possible to adjust camber and caster on newer Honda Civics • Arm may be used on vehicles that have retained their stock ride height and vehicles that have been lowered for performance and appearance ASCOT NO. MFG. NO. 222-62010 62010 DESCRIPTION Honda Front Camber/ Caster Control Arm APPLICATIONS HONDA: 1996-2000 Civic APPLICATIONS HYUNDAI: 2007 & Up Elantra; KIA: 2007 & Up Optima, 2007 & Up Rondo 226-67090 226-67410 ADJUSTABLE UPPER CONTROL ARM • Camber adjustment from -1° to + 4° • 1 control arm per wheel ASCOT NO. MFG. NO. DESCRIPTION 236-00100 CA100 Adjustable Upper Control Arm APPLICATIONS 236-00100 HONDA: 1996-2000 Civic, 1997-2000 CRV ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE ALIGNMENT

346 ALIGNMENT Camber/Casters Tools (cont.) CHRYSLER/DODGE FRONT CONTROL ARM • Arms fit both the right and left side • Camber adjustment ± 2.0 degrees • Caster adjustment ± 1.5 degrees • 1 per wheel required ASCOT NO. MFG. NO. APPLICATIONS 222-66040 222-66045 222-66047 66040 66045 66047 CHRYSLER: 2005-2008 300 RWD; DODGE: 2006 - 2008 Challenger, 2006 - 2008 Charger RWD, 2005 - 2008 Magnum RWD CHRYSLER: 2009 & Up 300; DODGE: 2009 & Up Challenger, 2009 & Up Charger RWD CHRYSLER: 2005 & Up 300 RWD; DODGE: 2006 & Up Charger AWD, 2005 - 2008 Magnum AWD HONDA CIVIC REAR ADJUSTABLE CONTROL ARM • SPC's unique adjustment design permits on car adjustment of ±3.0° camber and is adjustable for life • SPC's forged steel design adds adjustment to the arm without a weight penalty vs. the OE arm it will replace • REAR ADJUSTMENT RANGE: Camber ± 3.0 degrees • 1 per wheel required ASCOT NO. MFG. NO. APPLICATIONS 222-67467 67467 2016 & Up Honda Civic (Incl. Si/Hybrid) LOWER CONTROL ARM CAMBER KIT • Even with the suspension loaded, this kits makes changes of up to +/-1.5 degree camber/caster fast and easy ASCOT NO. MFG. NO. 223-82360 82360 DESCRIPTION Lower Control Arm Camber Kit REAR ADJUSTABLE LOWER CONTROL ARM • This hi-strength adjustable lower rear camber arm provides ± 2.0 degrees of change for the popular BRZ, FR-S, WRX and Impreza • REAR ADJUSTMENT RANGE: Camber ± 2.0°, Toe 1.5° fixed • 1 per wheel required • RECOMMENDED TOOLS: 67647 Bushing Sleeves, 72509 Ball Joint Press ASCOT NO. MFG. NO. DESCRIPTION 222-67660 67660 Rear Adjustable Lower Control Arm ADJUSTABLE BALL JOINT • Adjustable upper ball joints make front camber/caster adjustments easy on late model Honda and Acura • ADJUSTMENT: -1.50° to +1.50° ASCOT NO. MFG. NO. 226-67125 67125 DESCRIPTION Honda/Acura Adjustable Ball Joint 226-67165 67165 Honda/Acura Adjustable Ball Joint APPLICATIONS ACURA: 1996 - 97 2.2CL, 1998 - 99 2.3CL, 1996 - 99 3.0CL, 2001-04 3.2CL, 1999 -2004 TSX; 199698 2.5 TL; 3.2 TL; HONDA: 1998 - 02 Accord, 1989 - 91 Civic & CRX, 1995 - 98 Odyssey ACURA: 1995 - 98 2.5TL, 1992 - 94 Vigor (front); HONDA: 1992 - 02 Prelude (Rear) 1992 - 1996 Prelude (Front) PERFORMANCE BALL JOINT PRESS SET • Can remove the ball joint from the front upper control arm without removing the arm from the vehicle ASCOT NO. MFG. NO. DESCRIPTION 227-40920 40920 Performance Ball Joint Set 6-67125 227-40920 BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION ALIGNMENT

ALIGNMENT EZ SHIMS™ FULL CONTACT DUAL ANGLE EZ SHIMS™ • Full contact/dual angle • Corrects toe and camber with one shim • Total of three shims cover most shimable FWD vehicles ASCOT NO. MFG. NO. 221-75200 221-75400 221-75600 221-75800 75200 75400 75600 75800 DESCRIPTION APPLICATIONS Blue Grey Yellow Red Audi, Chevrolet/Geo, Chrysler, Dodge, Eagle, Isuzu, Plymouth, Volkswagen Acura, Audi, Buick, Chevrolet, Chrysler, Dodge, Ford, Honda, Mercury, Nissan, Oldsmobile, Plymouth, Pontiac Buick, Cadillac, Chevrolet, Chrysler, Geo, Olds, Pontiac, Scion, Toyota, VW Buick, Cadillac, Chevrolet, Geo, Lexus SP, Oldsmobile, Pontiac, Toyota FORD/DODGE TRUCK ADJUSTABLE CAMBER/CASTER BUSHING • Camber and caster adjustment up to +/- 2-3/4° • 1 bushing per wheel ASCOT NO. MFG. NO. 231-00532 532 DESCRIPTION Ford/Dodge Truck Adjustable Camber/Caster Bushing 231-00535 233-23120 233-23130 535 23120 23130 Ford Downsize Truck Adjustable Camber/Caster Bushing SET (9) 4WD CAM/CAS Sleeves. Set 23120 contains 23121 thru 23129 SET (9) 4WD & RWD SLEEVES. Set contains one each of 23131 thru 23139 APPLICATIONS FORD: 1980-1985 4WD F150 and Bronco, 1980-2000 4WD F250 and F350; DODGE: 1994-1999 2WD/4WD 2500 Trucks, 1994-1999 4WD 3500 Trucks FORD: 1983-1990 4WD Downsize Trucks FORD 4WD: 1983 - 89 Bronco II; 1990 (Early) Bronco II; 1983 - 89 Ranger FORD 4WD: 1997 - 98 F250 (H/D), 1999 - 04 F250, F350, F450, F550, Super Duty 2000 - 05 Excursion, 1992 - 98 F350 Crew Cab; FORD RWD: 1999 - 04 F450, F550 Super Duty; DODGE 4WD: 1994 - 99 BR2500, BR3500; DODGE RWD: 1994 - 02 BR3500 w/Mono Beam FORD COMBINATION SLEEVE PULLER • Pulls both O.E. and most aftermarket camber/caster sleeves quickly and efficiently without damaging the ears of the sleeve • Heat treated high strength steel • Single-unit design with no loose parts ASCOT NO. MFG. NO. 247-77880 DESCRIPTION 77880 Ford Combination Sleeve Puller APPLICATIONS FORD: Twin I-Beam w And Lower Ball Join FASTRAX™ COMPLETE ADJUSTABLE CAMBER/CASTER GA • Portable, hands-free alignment can be done quickly and easily with the FasT Adjustable Camber/Caster Gauge stock or Specialty Product’s sliding ball joints ASCOT NO. MFG. NO. 223-91000 91000 WHEEL SIZE 13 "- 18" 247 231-00532 347 FASTRAX™ CAMBER/CASTER GAUGE • Add quick alignment checks to your fleet PMs • Save tire wear & fuel costs ASCOT NO. MFG. NO. 223-91040 223-91040 91040 WHEEL SIZE 21" - 26" ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE ALIGNMENT

348 ALIGNMENT Heavy Duty Alignment TRUCK AXLE SHIMS (HEAVY DUTY ZINC ALLOY) • Available in 1/2° changes up to a 4° caster change, either positive or negative • Packaged six per box • Any solid axle 2 or 4 wheel drive vehicle ASCOT NO. MFG. NO. 243-00891 WIDTH 243-00892 243-00893 243-00894 243-00895 243-00896 243-00897 243-00898 89199 89299 89399 89499 89599 89699 89799 89899 3"-3-1/2"-4" 3"-3-1/2"-4" 3"-3-1/2"-4" DEGREE TAPER 1/2˚ 1˚ 1-1/2˚ 3"-3-1/2"-4" 2˚ 3"-3-1/2"-4" 3"-3-1/2"-4" 3˚ 3"-3-1/2"-4" 243-00891 2-1/2˚ 3-1/2˚ 3"-3-1/2"-4" 4˚ TRUCK AXLE SHIMS (HEAVY DUTY ZINC ALLOY) • One part number gives you six shims in a box ASCOT NO. MFG. NO. WIDTH 243-00841 243-00842 243-00843 243-00844 243-00845 243-00846 243-00847 243-00848 84199 84299 84399 84499 84599 84699 84799 84899 2-1/4"- 2-1/2" 2-1/4"- 2-1/2" 2-1/4"- 2-1/2" 2-1/4"- 2-1/2" 2-1/4"- 2-1/2" 2-1/4"- 2-1/2" 2-1/4"- 2-1/2" 2-1/4"- 2-1/2" DEGREE TAPER 1/2˚ 1˚ 1-1/2˚ 2˚ 2-1/2˚ 3˚ 3-1/2˚ 4˚ PETERBILT AIR LEAF ADJUSTING SHIM ASCOT NO. MFG. NO. 246-35010 246-35011 246-35012 SIZE 35010 35011 35012 1/32" 1/16" 1/8" QTY. 6 6 6 FREIGHTLINER ADJUSTING SHIMS ASCOT NO. MFG. NO. 246-35020 SIZE 246-35021 246-35022 35020 35021 35022 1/32" 1/16" 1/8" BOX WT. 1-1/2 Lbs. 1-1/2 Lbs 2 Lbs. 2-1/4 Lbs. 2-3/4 Lbs. 2-3/4 Lbs. 3-1/4 Lbs. 3-1/4 Lbs. 246-35010 QTY. 6 6 6 KENWORTH AIR GLIDE SPACER FOR EIGHT BAGGERS ASCOT NO. MFG. NO. 241-35001 241-35002 241-35003 241-35004 241-35005 241-35006 241-35007 35001 35002 35003 35004 35005 35006 35007 THICKNESS 1/32" 1/16" 1/8" 1/4" 1/2" 3/4" 1" QTY. 6 6 6 6 6 6 6 241-35001 1/32" Spacer BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION ALIGNMENT

ALIGNMENT SUSPENSION SYSTEMS VOLVO/WHITE TANDEM SHIMS ASCOT NO. MFG. NO. SIZE 246-35030 246-35031 246-35032 35030 35031 35032 1/32" 1/16" 1/8" I.H.C. TORQUE ARM SHIMS ASCOT NO. MFG. NO. SIZE 246-35040 246-35041 246-35042 35040 35041 35042 1/32" 1/16" 1/8" 349 QTY. 6 6 6 APPLICATION GUIDE QTY. 6 6 6 SINGLE SLOT TANDEM TRUCK SHIMS ASCOT NO. MFG. NO. SIZE 246-35060 246-35061 246-35062 35060 35061 35062 1/32" 1/16" 1/8" QTY. 6 6 6 FREIGHTLINER SHIMS FOR AIR GLIDE SUSPENSION ASCOT NO. MFG. NO. 246-35070 SIZE 246-35071 246-35072 35070 35071 35072 1/32" 1/16" 1/8" PETERBILT/KENWORTH FLEX AIR SUSPENSION SHIMS • Adjust thrust angle and toe by shimming the torque arms ASCOT NO. MFG. NO. 246-36010 246-36011 246-36012 SIZE 36010 36011 36012 1/32" 1/16" 1/8" S-CAM BUSHING EXTRACTOR ASCOT NO. MFG. NO. 247-91860 91860 TANDEM ALIGNMENT SET • These alignment angle shims are now available in a heavy duty metal box to help you organize all of your shims • Packaged with a large variety of shims and an organization chart inside the lid to make reordering and organization of shims quick and easy ASCOT NO. MFG. NO. 246-36000 36000 DESCRIPTION Tandem Alignment Set 246-36000 QTY. 6 6 6 QTY. 6 6 6 246-36010 DESCRIPTION S-Cam Bushing Extractor ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE ALIGNMENT

350 ALIGNMENT Heavy Duty Alignment (cont.) GM UPPER CONTROL ARM PUNCH • For removing the alignment inserts on the upper control arm alignment brackets without damaging the alignment bracket • Lubricate before use • Not for use with impact wrenches (air tools) ASCOT NO. MFG. NO. 247-74910 74910 DESCRIPTION GM Upper Control Arm Punch APPLICATIONS CHEVROLET/GM: 1989 - 1998 2WD/4WD C & K Series 1/2, 3/4 & 1 Ton Trucks,1991 & Up AWD Astro Vans & AWD Safari Vans CANYON/COLORADO SOCKET • This special grooved socket fits over the end of the bolt allowing the technician to turn the alignment cams to change alignment angles after loosening the lock nut ASCOT NO. MFG. NO. 236-45938 45938 DESCRIPTION Canyon/Colorado Socket 247-74910 236-45938 236-77350 FORD SUPER DUTY TIE ROD SLEEVE ADJUSTER • Extra long bar gives you maximum leverage to loosen rusted sleeves without injuring your knuckles • 8-position tool allows 360° rotation without removing the adjuster block from the sleeve ASCOT NO. MFG. NO. 236-77350 77350 DESCRIPTION Ford Super Duty Tie Rod Sleeve Adjuster AIR BLADDER CAMBER ADJUSTING TOOL • Simply loosen the strut mount bolts, place the adjuster between the tire and strut, and inflate • To adjust camber slowly release the air until the wheel retracts to the specified alignment setting, tighten bolts and the alignment is done • INCLUDES: A specially designed, puncture resistant air bladder, 2’ air hose, a low pressure pop-off valve to prevent overinflating and an air control valve for inflating and controlled deflating ASCOT NO. MFG. NO. DESCRIPTION 228-61400 DOWTC614 Air Bladder Camber Adjusting Tool H/D STEEL WHEEL RIM STRAIGHTENING TOOL • For quick and easy removal of indentations on wheel flanges and rims of most vehicles ASCOT NO. MFG. NO. DESCRIPTION 247-08130 81309 H/D Steel Wheel Rim Straightening Tool INNER TIE ROD END WRENCH SET • CONTAINS: 89105, 89106, 89107, 89108 • CAUTION: Not for use with impact wrenches (Air tools) ASCOT NO. MFG. NO. DESCRIPTION 227-89000 227-89000 89000 Inner Tie Rod End Wrench Set BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION ALIGNMENT

ALIGNMENT Automotive Alignment Equipment DWA1000XL WHEEL ALIGNMENT SYSTEM The DWA1000XL wireless alignment system utilizes 8 Sensor CCD Technology and MEMS static accelerometers, providing the latest in measuring technology. CEMB's DWA 1000 total vehicle wheel alignment machine improves safety and driver comfort, reduces fuel consumption and tire wear. Comes fully assembled. DWA3500 3D HIGH DEFINITION WHEEL ALIGNMENT SYSTEM DWA3500 is the new 3D wheel alignment system for cars and light commercial vehicles, with a completely redesigned cabinet with drawers and housings for printer and accessories, an easy accessibility for maintenance and an advanced software. The 3D camera support beam is motorized and fully automated. Camera beam height is automatically adjusted to the height of lift. The software system, entirely developed by CEMB, guides the user through all the alignment operations with clear and user-friendly graphics. 351 203-10003 ASCOT NO. MFG. NO. 203-10003 DESCRIPTION DWA1000XL DWA1000XL Wheel Alignment System ASCOT NO. MFG. NO. 203-35000 DESCRIPTION DWA3500 DWA3500 Wheel Alignment System with Automatic Camera Beam ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE ALIGNMENT LA

352 ALIGNMENT Automotive Alignment Equipment (cont.) BRANICK STRUT SPRING COMPRESSOR • Known as "the standard in the industry," the 7600 handles the heaviest coilover-shocks, on light trucks and SUV's, without needing additional adapters • It also has longer handles for extra torque • The multi-positions upper spring hooks can be arranged for ultimate flexibility to fit "factory" coil spring configurations • It has a longer compression stroke that can even handle the Jeep KX Cherokee Trailhawk and an integrated structural ring guard • Whether long, short, narrow, or angled, the 7600 will get it done • MADE IN THE U.S.A. RADIAL RUNOUT GAUGE Radial runout is an out of round condition in which the radius of the wheel or tire is not consistent from the wheel center to any point on the rim or the tread. Tire and wheel radial runout are often factors in troubleshooting ride and handling and in maintaining correct wheel balancing to reduce vibration. • Measures vehicle vibration sensitivity • Measures out of round condition • EASY TO USE: only 2 adjustments • Pinpoints high or low spots in the tire • Determines accurate centering of tire and wheel mounting 228-00761 247-33173 ASCOT NO. MFG. NO. DESCRIPTION 228-07600 228-00761 228-00764 7600 761 764 Strut Spring Compressor Bench Mount for Strut Spring Compressor Mobile Cart for Strut Spring Compressor ASCOT NO. MFG. NO. DESCRIPTION 247-33173 64250 Radial Runout Gauge BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ALIGNMENT

AUTO & FLEET SERVICE 353 Battery Chargers & Testers Lubrication & Sealants Exhaust Hoses & Tailpipe Adapters Bench Grinders & Shop Vises Pliers & Screwdrivers Shop Cleaners & Brushes Shop Lights Service Stickers Tire Displays & Carts Interior Protection Products Studding Equipment Drains, Pumps & Fluid Exchange Safety Products Wheel Chocks Mechanic's Gloves WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE

AUTO & FLEET SERVICE 355 B 12V 10A PROSERIES RAPID CHARGER ASCOT NO. MFG. NO. DESCRIPTION 341-00117 DSR117 6V/12V 125A PROSERIES BATTERY CHARGER/ENGINE STARTER ASCOT NO. MFG. NO. DESCRIPTION 341-00118 DSR118 6V/12V 125A ProSeries Battery Charger/Engine Starter PROSERIES 12V 2200 PEAK AMP JUMP STARTER WITH USB AND DC POWER ASCOT NO. MFG. NO. DESCRIPTION 341-00114 DSR114 ProSeries 12V 2200 Peak Amp Jump Starter with USB and DC Power 341-00114 PROSERIES 1800 PEAK AMP JUMP STARTER ASCOT NO. MFG. NO. DESCRIPTION 341-00119 DSR119 ProSeries 1800 Peak Amp Jump Starter 341-00119 12V 250A PROSERIES BATTERY CHARGER/ENGINE STARTER ASCOT NO. MFG. NO. DESCRIPTION 341-00121 DSR121 12V 250A ProSeries Battery Charger/Engine Starter 341-00117 12V 10A ProSeries Rapid Charger 6/12V 275A PROSERIES BATTERY CHARGER/ENGINE STARTER ASCOT NO. MFG. NO. DESCRIPTION 341-00122 DSR122 6/12V 275A ProSeries Battery Charger/Engine Starter 6/2/40/20/250/125A 12/24V AUTOMATIC BATTERY CHARGER/ENGINE STARTER ASCOT NO. MFG. NO. DESCRIPTION 341-01352 SC1352 6/2/40/20/250/125A 12/24V Automatic Battery Charger/Engine Starter 341-01352 ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE

356 AUTO & FLEET SERVICE Lubric B'LASTER PENETRATING LITHIUM GREASE • High-quality lithium grease • Time-release penetrating action • Superior lubrication & protection • QUANTITY: 6 per case ASCOT NO. MFG. NO. DESCRIPTION 328-00008 GR-8A-PB B'laster Penetrating Lithium Grease, 8 oz. B'LASTER PENETRATING GREASE • High-quality synthetic grease • Time-release penetrating action • Superior anti-seize properties • Superior grease fitting lubrication & protection • QUANTITY: 10 per case ASCOT NO. MFG. NO. 328-00314 DESCRIPTION GR-14C-PB B'laster Penetrating Grease, 14 oz. 328-00008 328-00314 B'LASTER MAX HD GREASE • Excellent high-temp lubrication • Superior corrosion protection • Does not drip in severe conditions • Protects up to high temperatures of 550°F (dropping point) • QUANTITY: 10 per case HIGH TEMP LUBRICATION FORMULA ASCOT NO. MFG. NO. 328-00014 DESCRIPTION GR-14C-HDG B'laster Max HD Grease, 14 oz. ASCOT NO. MFG. NO. 328-00050 DESCRIPTION PB-50 B'laster All-Purpose Lubricant, 8 oz. 328-00050 B'LASTER ALL-PURPOSE LUBRICANT • Teflon™ fluoropolymer reduces friction & wear • Protect surfaces • Over 1000 indoor & outdoor applications • Enhance performance • Light vanilla scent • Use on all moving parts • QUANTITY: 12 per case 328-00014 B'LASTER SILICONE LUBE • Teflon™ fluoropolymer enhances performance • Long-lasting lubrication • Won’t accumulate dust & dirt • QUANTITY: 12 per case B'LASTER EXTRA TACKY RED GREASE • Maximum anti-wear & extreme pressure protection • Resists thinning in high temps (550°F dropping point) • Protects against rust & corrosion • QUANTITY: 10 per case LONG LASTING PROTECTS AGAINST RUST ASCOT NO. MFG. NO. 328-00016 16-SL DESCRIPTION B'laster Silicone Lube, 11 oz. 328-00016 ASCOT NO. MFG. NO. 328-00114 DESCRIPTION GR-14C-HTR B'laster Extra Tacky Red Grease, 14 oz. 328-00114 BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION AUTO & FLEET SERVICE

AUTO & FLEET SERVICE 357 B'LASTER DRY LUBRICANT B'LASTER CITRUS DEGREASER • Teflon™ fluoropolymer helps reduce friction & wear • Enhance performance • Protect surfaces • QUANTITY: 12 per case • Fast-acting formula rinses clean with water • Safely cleans stainless steel • Spray on & wipe off tough grease • QUANTITY: 12 per case ASCOT NO. MFG. NO. 328-00116 16-TDL DESCRIPTION CITRUS BASED B'laster Dry Lubricant, 9.3 oz. 328-00116 B'LASTER PRO GRADE MULTI-PURPOSE GREASE • Superior general purpose lubrication • Protects against rust & corrosion • Excellent water resistance • QUANTITY: 10 per case ASCOT NO. MFG. NO. 328-00214 GR-14CMP DESCRIPTION B'laster Pro Grade Multi-Purpose Grease, 14 oz. 328-00214 B'LASTER PARTS WASH SOLVENT • Cuts through cutting oil, motor oils & grease • HIGH FLASHPOINT FORMULA: 145°F • Leaves parts residue free • Safe for use on all metals, most plastics & painted surfaces LEAVES PARTS RESIDUE FREE 393-00005 ASCOT NO. MFG. NO. 393-00128 393-00005 5-PWS DESCRIPTION 128-PWS B'laster Parts Wash Solvent, 1-Gallon (4 per case) B'laster Parts Wash Solvent, 5-Gallon Pail 393-00128 ASCOT NO. MFG. NO. 395-00216 16-LG DESCRIPTION B'laster White Lithium Grease, 11 oz. 395-00216 ASCOT NO. MFG. NO. 395-00116 16-GDL DESCRIPTION B'laster Garage Door Lube, 9.3 oz. 395-00116 REDUCE FRICTION & WEAR B'LASTER GARAGE DOOR LUBE PROTECTS AGAINST RUST • Teflon™ fluoropolymer reduces friction & wear • Won’t accumulate dust & dirt • Quiets noisy operation • QUANTITY: 12 per case ASCOT NO. MFG. NO. 395-00016 16-CBD DESCRIPTION B'laster Citrus Degreaser, 11 oz. 395-00016 B'LASTER WHITE LITHIUM GREASE • Keep surfaces lubricated in extreme temperatures • Protects against moisture & oxidation • Leaves a thick layer of grease • QUANTITY: 12 per case THICK GREASE LAYER ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE

358 AUTO & FLEET SERVICE Exhaus CRUSHPROOF EXHAUST VENTILATION SYSTEM DOOR PORTS Y-CONNECTORS FLARELOK® HOSES • For use with cars and small trucks • Flared end on each length to permit connection of two or more lengths of same size hose 391-00130 391-00125 391-00240 391-00230 SPLICE CONNECTORS ELBOWS 391-21040 391-20040 OVERHEAD DUCT 391-00430 391-00330 Y-ASSEMBLY TAILPIPE ADAPTERS • Crushproof offers a complete line of accessory items 391-22040 ASCOT NO. 391-00125 391-00130 391-00140 391-00225 391-00230 391-00240 391-20030 391-20040 391-20050 391-20060 391-21025 391-21030 391-21040 391-00325 391-00330 391-00340 391-00350 391-00425 391-00430 391-22150 391-22160 391-22030 391-22040 391-22050 391-52500 391-53000 391-54000 MFG. NO. DF25 ADF30 ADF40 RY25 RY30 AY40 AC30 AC40 AC50 AC60 SP25 SP30 SP40 AEL25 AEL30 AEL40 AEL50 EB25 EB30 OC50D AC-60-OC OC30 OC40 OC50 YA250 YA300 YA400 DESCRIPTION 2-1/2" Rubber Door Port 3" Aluminum Door Port 4" Aluminum Door Port 2-1/2" Rubber Y-Connector 3" Rubber Y-Connector 4" Aluminum Y-Connector 3" Aluminum Splice Connector 4" Aluminum Splice Connector 5" Aluminum Splice Connector 6" Aluminum Splice Connector 2-1/2" Rubber Splice Connector 3" Rubber Splice Connector 4" Rubber Splice Connector 2-1/2" Aluminum Elbow 3" Aluminum Elbow 4" Aluminum Elbow 5" Aluminum Elbow 2-1/2" Rubber Elbow 3" Rubber Elbow 5" Overhead Duct Connector W/Damper 6" Overhead Duct Connector 3" Overhead Duct Connector 4" Overhead Duct Connector 5" Overhead Duct Connector 2-1/2" Y-Assembly 3" Y-Assembly 4" Y-Assembly ASCOT NO. MFG. NO. 391-93000 391-90250 391-90300 391-90350 391-90400 391-90600 TPA3000 F250 F300 F350 F400 DSR600 DESCRIPTION Split Adapter Straight W/ Hook & Chain Straight w/ Hook & Chain Straight w/ Hook & Chain Straight w/ Hook & Chain Stack Adapter 391-90606 DSR600-6 Stack Adapter 391-91000 UNA1000 391-90475 F475 391-90575 391-91250 391-91300 F575 RA250 RA300 Narrow Dual Oval Adapter (2.5" x 6") Oval Adapter (3.5" x 8.5") Bell w/Snaps Bell w/Snaps TAILPIPE STYLE Separated Single Single Single Single Diesel Stack Diesel Stack 2.5" TAILPIPE SIZE Up To 2-1/2" Up To 2-1/2" Up To 3-12/" Up To 5-1/2" Up To 5-1/2" 2.5" HOSE ID 3" Up To 2" 2-1/2", 3", 3-1/2" 2-1/2",3", 3-1/2" Up To 3" 2-1/2", 3", 3-1/2" 3-1/2", 4", 5 4", 5" 5", 6" 3" Twin Oval 2", 5-1/2" 3", 4" Twin Oval 2", 5-1/2" 3", 4" All All All All 3" 3" 391-53000 ASCOT NO. MFG. NO. 391-15250 391-15300 391-15350 391-15400 FLT250 FLT300 FLT350 FLT400 DESCRIPTION 2-1/2" x 11' Flarelok® Hose 3" x 11' Flarelok® Hose 3-1/2" x 11' Flarelok® Hose 4" x 11' Flarelok® Hose 391-15350 BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION AUTO & FLEET SERVICE

AUTO & FLEET SERVICE 359 Bench Grinder INDUSTRIAL BENCH GRINDERS • UL listed motor • Pre-lubricated and enclosed ball bearings • Cast iron wheel guards and dust vents • One piece quick adjusting spark guards • Large eye shields with quick adjustment • Adjustable tool rests • Heavy duty guarded toggle switch on 8" and 10" • Fine and coarse vitrified wheels included • Rubber mounts prevent movement • 3-conductor cord with 3-prong plug 6" SWIVEL BASE BENCH VISE • Heavy duty 30,000 PSI castings for long life and added strength • Swivel bar rotates 360° and has double lockdowns ensuring maximum stability • Powder coat paint resists scratches and provides a tough durable finish • Replaceable hardened steel top and pipe jaws UL LISTED MOTOR 311-21500 ASCOT NO. MFG. NO. 311-77101 311-77102 311-77103 311-77172 577101 577102 577103 577172 DESCRIPTION JBG-6A: Bench Grinder, 6" Wheel JBG-8A: Bench Grinder, 8" Wheel JBG-10A: Bench Grinder, 10" Wheel JPS-2: Optional Pedestal 311-77172 BENCH GRINDER MODELS AT A GLANCE Model No. JBG-6A Shaft Diameter (In.) ASCOT. No. 311-77101 1/2 Wheel Diameter (Dia. x W/ In.) 6 x 3/4 Wheel Speed (RPM) 3450 Wheel Grits 36/60 Motor (HP) Overall Dimensions (LxWxH/ In.) JBG-8A 311-77102 5/8 8 x 1 3450 36/60 1/2HP, 115V, 1Ph 1HP, 115V, 1Ph 18 x 10-1/2 x 8-1/2 Net Weight (Lb.) 38 HARDENED STEEL TOP JBG-10A 311-77103 1 10 x 1 1725 24/46 1-1/2HP, 115V, 1Ph 19 x 12-1/2 x 10 24-1/2 x 12-1/4 x 13 60 110 ASCOT NO. MFG. NO. 311-21500 21500 JAW WIDTH 6" THROAT DEPTH 4-1/8" PIPE CAP. 1/4 - 3-1/2 WT. 69.35 lb. SWIVEL BAR ROTATES 360° ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE

360 AUTO & FLEET SERVICE Bench Grinder R PROFESSIONAL SHOP VISES • Cast iron jaw with heavy internal ribs for added strength. Pipe jaws are permanently cast in for greater channel strength • Cast iron back jaw designed for exceptional alignment with the front jaw • “V” notched, replaceable/reversible jaws made of carbon steel and heat treated for extra strength • Specially designed spring loaded handle and screw guarantees quick jaw response • Front jaw beam covers and protects screws • Steel handle balls forged from handle stock • Lifetime Casting Warranty TRADESMAN VISES CAST IRON JAWS • Fully sealed one-piece spindle nut assembly for a lifetime of smoo operation • Precision machined slide bar to eliminate movemen jaw regardless of opened position • 60,000 PSI ductile iron body, jaw & base • Machined steel serrated jaws with black phosphate coa for increased durability and c resistance • Lifetime Warr 311-28806 ASCOT NO. MFG. NO. 311-28805 311-28806 311-28807 311-28808 JAW WIDTH 28805 4-1/2" 28806 5-1/2" 28807 6-1/2" 28808 8" OPENING CAPACITY MAX. 3-1/2" 5" 6" 6-3/4" THROAT DEPTH 3-1/2" PIPE JAW CAPACITY WEIGHT 1/4" - 3-1/2" 42 lb. 3-5/8" 3/8" - 3-1/2" 42 lb. 4-1/4" 5" 3/8" - 4-1/2" 3/8" - 4" 42 lb. 111 lb. MECHANICS PRO VISES 311-64055 • Enclosed Spindle for smooth operation • Precision machined slide bar to eliminate mo in front jaw regardles position • Needle roller thrus bearing to easily apply and release clamping force • 60,000 PSI Jaw and Base • Lifetime W 311-28811 ENCLOSED SPINDLE 311-64800 ASCOT NO. 311-64055 311-64065 311-64650 311-64800 MFG. NO. JAW WIDTH JAW OPENING 64055 5-1/2" 6-1/2" 64065 6-1/2" 64650 6-1/2" 64800 8" 7-1/2" 7"-10" 8"-11" THROAT DEPTH 3-3/16" 3-3/4" PIPE CAP. 1/8" 1/8"-2-1/2" 3-3/16" 1/8"-2-1/2" 3-3/4" 1/8"-3" WEIGHT 30 lb. 41 lb. 50 lb. 74 lb. ASCOT NO. MFG. NO. 311-28810 311-28811 311-28812 311-28813 311-28814 JAW WIDTH 28810 4-1/2" 28811 5-1/2" 28812 6-1/2" 28813 28814 8" 10" OPENING CAPACITY MAX. 4" 5" 6" 8-1/2" 12" THROAT DEPTH 3-1/2" 3-5/8" 4-3/8" 4-1/2" 5-1/4" PIPE JAW CAPACITY WEIGHT 1/4" - 3" 31 lb. 1/4" - 3" 38 lb. 1/4" - 4" 56 lb. 1/2" - 4" 83 lb. 1/2" - 5" PRECISION MACHINED SLIDE BAR 115 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION AUTO & FLEET SERVICE

AUTO & FLEET SERVICE 361 Plier CHANNELLOCK PLIERS • 100% MADE IN USA • LASER heat-treated cutting edges perform better and last longer • FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention • CHANNELLOCK BLUE® grips for c 8-PIECE PROFESSIONAL SCREWDRIVER SET • Includes 5 flat tip drivers and 3 Phillips tip drivers: SLOTTED: 3/8" x 8", 5/16" x 6", 1/4" x 4", 3/16" x 3", 1/4" x 1-1/2" PHILLIPS: #2 Phillips x 4", #1 Phillips x 3", #2 Phillips x 1-1/2" • Black handles • Hardened chrome vanadium shafts • Vapor blasted magnetic tips • Packaged in molded plastic tray for storage • Hex bolsters for extra turning power 319-19800 ASCOT NO. MFG. NO. 319-19800 19800 DESCRIPTION 8-Piece Professional Screwdriver Set 1/4” SOCKET DRIVER • Shank made from chrome vanadium • Ov Length: 6" • Shank Length: 2-1/2" • Ideal f use with the TPMS 11mm x 12mm flip sock • Screwdriver handle, made from durable plastic-like material • MADE IN THE USA ASCOT NO. MFG. NO. 319-00337 319-00357 319-00358 319-00436 319-00526 337 357 358 436 526 DESCRIPTION 7" High Leverage Diagonal Cutting Plier 7" End Cutting Plier 8" End Cutting Plier 6" Diagonal Cutting Plier, Box Joint 6" Slip Joint Plier, Wire Cutting Shear ASCOT NO. MFG. NO. 319-72521 7252100 DESCRIPTION 1/4" Socket Driv with Screwdriver Handle MADE IN THE USA ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE 319-00337 319-00358 319-00357 319-00436 319-00526

362 AUTO & FLEET SERVICE Shop Cleaner FLOOR SQUEEGEES • Black neoprene rubber blade designed for rough, heavy use • Handle not included, order separately PLASTIC HANDLED BRASS SIDEWALL BRUSH • Densely packed brass bristles • Great for cleaning white sidewall tires • BRISTLE LENGTH: 3/4" • OVERALL LENGTH: 8-1/4" • Plastic handle fits comfortably in the hand ASCOT NO. MFG. NO. DESCRIPTION 395-45507 395-44020 45507 44020 Handle PALMYRA FILL GARAGE BRUSHES/BROOMS • Excellent for heavy duty sweeping of concrete, sidewalks and garage floors • Can be used for wet or dry sweeping ASCOT NO. MFG. NO. DESCRIPTION 395-13124 VT-932 ASCOT NO. MFG. NO. DESCRIPTION 395-42023 42023 WOODEN HANDLED WIRE BRUSH WITH METAL SCRAPER 24" Garage Brush-Palmyra • Cleans rust from rims and wheels • 19 rows of steel bristles • Slightly curved wooden handle • Metal scraper included • BRISTLE LENGTH: 1" • OVERALL LENGTH: 14-1/4" Plastic Handled Brass Sidewall Brush 395-13124 DENSELY PACKED BRASS BRISTLES 24" Straight Squeegee PREMIUM HAND WIPES Winntec’s premium hand wipes are the perfect way to keep clean in any workshop • Powerful cleaning • Moisturizing • Great for hands and surfaces • Water saving • 336 wipes per box 535-00150 CLEANS RUST FROM RIMS & WHEELS ASCOT NO. MFG. NO. 395-83039 DESCRIPTION G083039 Premium Hand Wipes 395-83039 BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION ASCOT NO. MFG. NO. 535-00150 VT-931 DESCRIPTION Wooden Handled Wire Brush with Metal Scraper AUTO & FLEET SERVICE

AUTO & FLEET SERVICE 363 FULL BORE HAND CLEANER • Rids hands of dirt and grease while leaving the skin soft and chap free • Solvent free • Economical • Contains skin moisturizers • Clean fragrance • Never irritates or burns open wounds • Rinses clean • Keeps your sink clean • Keeps your pipes clean • Will not separate during hot months • Long shelf life • Neutral pH • MEETS AMERICAN CLEAN WATERS ACT 395-00101 395-00102 395-00103 RIDS HANDS OF DIRT AND GREASE LEAVES HANDS SOFT AND CHAP FREE ASCOT NO. MFG. NO. 395-00101 395-00102 395-00103 395-00104 395-00300 395-00125 395-00126 TS1GAL TS1GAL-FT TS1GAL-16OZ DESCRIPTION 395-00104 ULTRA FLOW Ultra Flow, 1 Gallon Ultra Flow, 1 Gallon Flat Top Ultra Flow, 16 oz. ** ULTRA FLOW DISPENSERS Plastic Pump Plastic Pump TS300-D TS125-D TS125-FT-D Stainless Steel Screw On Dispenser ** Stainless Steel Wall Mount Dispenser Stainless Steel Wall Mount Dispenser (Fits Flat Top) SUPER GRIT 395-40000 395-06400 TS4000 TS6400 Super Grit, 4 Gallon ** Super Grit, 64 oz. EXTREME GREEN 395-00400 MG-HS-4GAL Extreme Green, 4 Gallon ** 395-06401 MG-HS-64OZ Extreme Green, 64 oz. 395-40000 395-00400 395-00300 395-00125 395-00126 395-06400 395-06401 ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE

364 AUTO & FLEET SERVICE Shop Ligh COB RECHARGEABLE WORK LIGHT W/ USB CABLE • 400LM brightness • Dimming Switch • Features a hook on lamp head and base with magnet for hands-free operation • WORKING TIME: Approx. 2.5 hrs. • CHARGING TIME: Approx. 4 hrs. • 8W COB LED HEAD LIGHT WITH RECHARGEABLE BATTERY • Hands-free, versatile and comfortable with HANDS-FREE OPERATION DIMMING SWITCH adjustable straps • MATERIAL: Aluminum +ABS+PC • LED: 1-piece high power CREE T6 bulb • BRIGHTNESS: Approx. 500LM for high mode • 4-MODE LED LAMPS: High - Low - Strobe - off • WORKING TIME: Approx. 6 hours on High; Approx. 12 hours on Low • CHARGING TIME: Approx. 5 hours • RECHARGEABLE BATTERIES: 2x 3.7V 1800mAh Li-ion batteries (3600mAh total battery capacity) • Sensor Function • USB cable included RECHARGEABLE WATERPROOF WORK LIGHT • Best in the industry, Ascot Supply Corporation’s Rechargeable Waterproof Work Light is the brightest rechargeable work light available with its powerful 66 LED’s (460 lumens) • Swivel hook for hanging • Universal attachment hook can be used as a light stand or attached under a car hood • Rechargeable battery • Replacement 12 V lighter adapter is also available and sold separately WATERPROOF HANDS-FREE OPERATION ADJUSTABLE STRAPS SWIVEL HOOK FOR HANGING 312-05224 312-03120 312-03007 ASCOT NO. MFG. NO. 312-05224 312-15224 ASCOT NO. MFG. NO. 312-03007 TWL3007E DESCRIPTION COB Rechargeable Work Light w/ USB Cable ASCOT NO. MFG. NO. 312-03120 THL2019 DESCRIPTION CREE Head Light with Rechargeable Battery 312-25224 CED5224P1-AS DESCRIPTION CED5224A-AS CED522P3-AS Rechargeable Waterproof Work Light Replacement AC Adapter for Rechargeable Waterproof Work Light 12V Lighter Adapter for Rechargeable Work Light BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION AUTO & FLEET SERVICE

AUTO & FLEET SERVICE 365 Servic STATIC CLING PRINTER • Full feature Reminder Sticker Solution takes professionalism to a new level • Godex Printer pre-programmed to work out of the box • 1 year parts and labor warranty (6 months on print head) • Includes 1 ribbon ASCOT NO. MFG. NO. 399-11111 DESCRIPTION 399-11111 FK-GX001-05 Static Cling Printer STATIC CLING REMINDER STICKERS • Excellent item to promote repeat business • Keeps your name, the service to be done and the time to do it in constant view of the customer • More effective than a door jam sticker • Static cling vinyl will cling to almost any smooth surface • No adhesive residue and they can be removed for cleaning and replacing • Silk screen printing process for a high quality image and a writing strip that won’t allow the ink to fade • Generic design stickers as well as personalized stickers 399-00102 399-00101 399-00103 ASCOT NO. 399-00101 399-00102 399-00103 DESCRIPTION Air Pressure/Tire Rotation Static Cling Sticker Oil Change Static Cling Sticker Service Reminder Static Cling Sticker ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE

366 AUTO & FLEET SERVICE T WALL MOUNT TIRE RACK • Designed and tested to meet your toughest standards • 500 lb./227 kg of tire and wheel assemblies kept off the floor to let you do the jobs that matter • Long heavy-duty steel tubes of 83"/2108 mm to hold 8 SUV tire and wheel assemblies (8 x 245 tread) • DIMENSIONS: 819/16" X 23-7/8" X 25-7/8" • MAX TIRE SIZE: 865 mm / 34" OD) • TIRE CAPACITY: 8 to 9 • LOAD CAPACITY: 500 lb./224 kg • WEIGHT: 42 lb. STANDARD TIRE DISPLAY ON CASTERS HEAVY DUTY STEEL TUBES 751-00060 • The standard tire display is 60" long and holds up to 14 tires, 7 on each of 2 tiers • This model is used a great deal by Goodyear and Michelin • With 2 wheels and 2 steel feet, moving this rack requires the display truck. The truck acts as a lever, facilitating handling in snow, on gravel surfaces and on inclines ASCOT NO. MFG. NO. 751-00060 MTD-60 ASCOT NO. MFG. NO. 751-00080 CAPACITY DIMENSIONS MWM-80 DELUXE TIRE DISPLAY ON CASTERS • Provides an excellent compromise between strength and lightness • Equipped with casters that let you move it quickly and easily • Allows you to store 16 tires with an outside diameter of up to 32" 8-9 Tires 81-9/16" x 23-7/8" x 25-7/8" CAPACITY 10-14 Tires DIMENSIONS 64-1/2" x 26-1/2" x 76-1/2" DOLLY FOR TIRE DISPL • Required to handle tire displa units • Only one is necessary even if you have several displa units • Compatible with all other makes of display units 751-00172 EASY TO MOVE COMPATIBLE WITH ALL DISPLAYS 751-00072 ASCOT NO. MFG. NO. 751-00072 MTD-72 CAPACITY 14-16 Tires DIMENSIONS 77" x 26-1/2" x 89" ASCOT NO. MFG. NO. 751-00172 MD DESCRIPTION Dolly for Tire Displays BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION AUTO & FLEET SERVICE

AUTO & FLEET SERVICE 367 TIRE RIDER TUFF TIRE C SMART TIRE CART • Easy to maneuver, even with a full load of tires • Can handle tires up t diameter • Features a gas spring tha automatically closes the arms and grips the tires • All you have to do is t down on the pedal, slide the c stack of tires and release the pedal. T frame lines up the tire on its o you to move tires 12 to 35 inches in siz • Works on passenger 15" tires up to truck siz 245/70R19.5 tires • Moves mounted tires and wheel sets • Moves tires in stacks of 8 t high • Stacks tires closer together than o carts which creates more storage space • No foot pedals • Great for loading and unloading trucks and containers • Patented tilting ac relieves stress off the user • New push/ system pushes the tires out of the SMAR Cart arms without stress • Fewer moving parts • Easy to assemble • “Patent Pending” PATENTED EASY TO MANEUVER TILT ACTION RELIEVES STRESS NEW PUSH/PULL SYSTEM 703-00810 ASCOT NO. MFG. NO. 703-47147 ASCOT NO. MFG. NO. 703-00810 MTC-E CAPACITY 6 to 8 tires DIMENSIONS 35" O.D. Max TIRE CART REPLACEMENT TIRES/WHEELS Sold as a pair of two • Flat-free foam design • SIZE: 10" x 3-1/2" • Industrial inner & outer wheel bearings • Compatible with Martins tire carts CAPACITY G471147HD DIMENSIONS 8 to 10 tires Handles sizes from 15" to truck size 245/70R19.5 TIRE DOLLY W/ CASTERS Includes (4) swivel, non-marking and smooth 3" casters, (1) equipped with brake • 300 lb. capacity • Ideal for moving tires around or for tire storage • Unique built-in compartment stackable design for space saving storage • SIZE: 25.2" x 25.2" x 4.33" 703-00818 ASCOT NO. MFG. NO. 703-00818 DESCRIPTION PU1005ASC Tire Cart Replacement Tires/Wheels ASCOT NO. MFG. NO. 703-00509 TC0509 DESCRIPTION Tire Dolly w/ Casters ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE

368 AUTO & FLEET SERVICE In The Slip-N-Grip® protection system provides total protection for the customer’s car while being serviced: • Covers hold fast to the upholstery: A patented process laminates two distinctly different plastics together - the top layer allows a person to easily slide into and out of the vehicle and the bottom, or gripping layer, keeps the seat cover in place • Unique process eliminates static electric clinging and wrinkling. A complete line of vehicle interior protection products are available along with a service center roll dispenser. PARTS RETURN BAG • Heavy plastic bag for holding old removed parts you’ve replaced • Keeps customer’s vehicle and hands clean ASCOT NO. MFG. NO. DESCRIPTION 399-60098 FB-P9943-56 SIZE Parts Return Bag 14" x 22" PAPER KEY TAG • Cost-effective, convenient solution for key control • Metal ring ASCOT NO. MFG. NO. DESCRIPTION 399-98313 FB-P9833-13 PLASTIC KEY TAG • Self-locking design holds keys secure • Large writing surface; holes are fully punched out eliminating “chads” • Perfect for quickly tagging keys in a busy service area ASCOT NO. MFG. NO. 399-99323 DESCRIPTION FB-P9933-23 White Plastic Key Tag - 4.5" x .75" QUANTITY 1000/package WORK TICKET HOLDER • Heavy-duty sewn nylon fabric handle ensures durability even in harsh conditions • Durable brass grommet increases strength ASCOT NO. MFG. NO. DESCRIPTION 399-99302 SIZE QUANTITY FB-P9933-02 Work Ticket Holder 10.5" x 14.5" 25/box PLASTIC FLOOR MAT • Slip-N-Grip® ASCOT NO. MFG. NO. 399-99432 FG-P9943-02 399-98313 SIZE Paper Key Tag with Metal Rings 1.5" x 2.75" QUANTITY 1,000/box 399-99323 399-99302 two-layer construction ensures mat stays in place • Impervious to water, oil, grease and most shop chemicals DESCRIPTION Plastic Floor Mat QUANTITY 500/roll GENERIC ADHESIVE TIRE LABEL • Features sure-grip adhesive • Proper used tire labeling sells tires ASCOT NO. MFG. NO. DESCRIPTION 399-99479 FB-P9943-79 Generic Adhesive Tire Label - 3" x 6" QUANTITY 500/roll 399-99432 399-99479 BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION AUTO & FLEET SERVICE

AUTO & FLEET SERVICE 369 399-99429 PLASTIC TIRE BAG • 40% post-consumer recycled resin • White film hides dirty tire • Ideal for returning old tires or snow tires for storage ASCOT NO. MFG. NO. DESCRIPTION 399-99391 399-99429 399-99392 FG-P9933-91 FG-P9943-29 FG-P9933-92 Extra Large Tire Bag Standard Tire Bag Large Tire Bag SIZE 47" x 48" x 1.25 Mil 36" x 40" 39" x 44" QUANTITY 125/roll 250/roll 250/roll PLASTIC SEAT COVER • Slip-N-Grip® 399-99415 FG-P9943-15 399-99415 seat covers have two distinct layers: the bottom layer grips the seat to stay in place and the top layer is smooth to allow easy entry and exit from the vehicle • Protects bucket, bench and split seats ASCOT NO. MFG. NO. DESCRIPTION Plastic Seat Cover QUANTITY 500/roll STEERING WHEEL COVER • Keeps grease, dirt and other shop chemicals off • Made of clear polyethylene with stretch elastic grip feature • Unique double-band steering wheel covers stays in place while allowing access to airbags STANDARD SIZE: Covers virtually all passenger cars and light trucks. ASCOT NO. MFG. NO. 399-99433 DESCRIPTION 399-99435 FB-P9943-33 FB-P9943-35 Double Band Steering Wheel Cover (Standard Size) Double Band Steering Wheel Cover (For Trucks) QUANTITY 500/box 250/box 399-99433 FLOOR-RACK START-UP KIT • Promotes your professional image by displaying your complete line of car interior protection products where your customers can see you putting them in their car • Convenient roll dispenser work station provides organized storage, helps save employee time and shows your customers you care about their car ASCOT NO. MFG. NO. 399-60000 DESCRIPTION FK-P9943-76 Product Dispenser System (Includes Product) FLOOR DISPENSER RACK • Industry-leading dispenser system keeps products organized and within reach • Presents “We Care” image and promotes cleanliness • Retention straps prevent free-rolling and locking casters keep dispenser in place • Top tray holds paper floor mats and other service items while lower tray provides extra storage ASCOT NO. MFG. NO. 399-98893 DESCRIPTION FB-P9833-89 Floor Dispenser Rack 399-60000 ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE

370 AUTO & FLEET SERVICE In 399-00005 PERSONALIZED PAPER FLOOR MATS • Either insert your logo where the footprints are or totally design a new layout • The stock is a high bulk 60 pound white sheet, size 17" x 22", with a one color imprint • Minimum order of 3,000 • Camera ready art must be supplied for all logos - one time artwork charge ASCOT NO. DESCRIPTION 399-00005 Personalized Paper Floor Mats PRIME HEAVY DUTY PAPER FLOOR MATS • Treated/coated mats, made from premium prime/virgin paper • Keeps dirt, grease, oil, spills, leaks and other shop fluids out of your customer’s vehicle during service • Prime paper is suitable for all weather climates and heavy foot traffic • Prime paper directly from paper mill provides same consistent quality every time • Printed with UV ink • Bright white paper produces vibrant, full color prints • Recyclable • SIZE: 17" x 19" • QUANTITY: 500 per box ASCOT NO. MFG. NO. 399-74980 DESCRIPTION M3273PP2280A Prime Heavy Duty Paper Floor Mats - 17" x 19" PLASTIC ARROW KEY TAG 399-74980 • Unique one piece key tag that attaches easily to the key ring with a hole for hanging on a board • Packaged 40 perforated sheets with 25 tags each • 1000 per pack ASCOT NO. 399-00011 DESCRIPTION Plastic Arrow Key Tag TIRE LABELS • 2-1/2" x 6" label for easy identification of new, used and retreaded tires • Packed 500 per roll ASCOT NO. MFG. NO. 601-00101 TL-101 DESCRIPTION Tire Labels New-Used-Retread 601-00101 BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION AUTO & FLEET SERVICE

AUTO & FLEET SERVICE 371 S STUD GUN, STUDDING EQUIPMENT PARTS BREAKDOWN 458-00010 4 ASCOT NO. MFG. NO. DESCRIPTION 458-00010 10-G 458-00002 458-04048 458-00005 458-00500 UGIGRIP® KFP2 4048 K-5 K-500 Stud Gun. Standard of the Industry. Automatic, Light weight STUD GUN PARTS (AS-9 MODEL) Stud Feeder. Fully automatic with 110 Volt motor, fast loading. Provides positive stud orientation. Feeds up to 225 studs per minute Feederboy Stud Gun. Designed for fast feeding studs of the AS-9 Gun Attaches with screw clamp. Operates by manually turning the feeder cap Stud Feeder. INCLUDES: shield for gun. Welded steel construction with saddle Studding Equipment Kit. INCLUDES: K-5 stand, AS-9 gun, KFP2 automatic stud feeder , SELF-ADJUSTING CARBIDE TIRE STUD • Delivers full-time traction, increases the safety, convenience and security • To order studs to best fit your customers’ tire, use the TSMI number recommended by the tire manufacturer SINGLE FLANGE STUDS: TSMI Size 11 Overall Length .345" Jacket Dia. .197" Nearest 32" to Hole Depth 12 .375" .197" 13 .470" .197" 13/32" 15 169 .520" .585" .197" .197" 15/32" 16/32" 17 19 .515" .635" .197" .250" Bottom Dia. .354" 354" 354" 354" 354" 354" 354" 11/32" 12/32" STUDDING EQUIPMENT • Lightweight, reduces road wear • Steel 12SL, 13SL & 16SL meet requirements for Washington, Oregon & Idaho ASCOT NO. STUDDING GUN 458-00010 458-00011 10G 10T USE WITH STUDS NUMBERED TSMI-11-12-13-15-16-17 TSMI-19-21 458-03820 0382 458-00911 00911 STUD GUN REPAIR & CONVERSION KITS 17/32" 19/32" ASCOT NO. STUDDING GUN USE WITH STUDS NUMBERED 458-03810 0381 Tire Stud Mini Repair Kit. INCLUDES: (3) 0084 External Fingers; (1) 0087 O-ring; (1) 0088 O-ring; (3) 0126 Pressing Springs Tire Stud Gun Large Repair Kit. INCLUDES: (6) 0126 Pressing Spring; (3) 0084 External Fingers; (2) 0087 O-ring; (2) 0088 O-ring; (1) 0092 Piston Cup; (1) 0136 O-ring Conversion Kit. Converts AS-9 Gun to AS-11 Truck Model. INCLUDES: (1) 0401 Truck Feed Tube; (1) 0400 Truck Stud Gun Head; (3) 0127 Truck Stud Gun Internal Finger PART NO. DESCRIPTION 0084 External Finger 0087 O-Ring 0088 O-Ring 0089 O-Ring 0090 O-Ring 0091 O-Ring 0092 Piston Cup 0095 Trigger Spring 0096 Trigger Pin 0098 Trigger 0099 Trigger Sleeve 0126 Pressing Spring 0127 Internal Finger 0128 Handle Body 0129 Piston 0130 Feed Tube 0131 Tapered Sleeve 0132 Head (Steel) 0133 Ring Nut 0134 Compression Spring 0135 Ring 0136 O-Ring 0383 Piston Cup STUD FEEDER PARTS (KFP2 MODEL) PART NO. DESCRIPTION 0169 Deflector Spring 0172 Snap Ring 0173 Screw 0174 Washer 0175 Clamp 0180 Drive Shaft Pin 0428 Washer 0519 Feed Wheel 0520 Base Plate 0521 Retaining Ring 0522 Feed Tube 0523 Screw 0524 Shaft 0525 Hex Bolt ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE

372 AUTO & FLEET SERVICE Dr 18-GALLON POLYETHYLENE WASTE OIL DRAIN • 18 gallon capacity • Plastic drain container • Comes with 16.5” funnel • Extends from 40” to 73” • Metal trolley comes with 4 casters and pull handle for safe and easier movement around the shop • Oil can be drained either by pour gravity, integrated drain valve or using integrated bung hole rotary barrel pump (not included) • SHIP WEIGHT: 24 lbs. ASCOT NO. MFG. NO. 329-08874 8874 DESCRIPTION 18-Gal Polyethylene Waste Oil Drain 329-08874 18-GALLON LOW PROFILE WASTE OIL DRAIN • Low profile drain height of 7.75” • Large 18 gallon baffled tank reduces “slosh” during transport • Large metal screen provides extra draining area and keeps out debris • Convenient rotary hand pump for fast evacuation • Long steel handle provides easy mobility to drain area • SHIP WEIGHT: 47 lbs. ASCOT NO. MFG. NO. 329-08878 8878 DESCRIPTION 18-Gal Low Profile Waste Oil Drain 329-08878 24-GALLON WASTE OIL DRAIN • Large 24 gallon steel recovery tank with 6’ drain hose • Tank-mounted oil-level sight gauge and convenient tool tray • Standard 15-3/4” drain funnel and wide 24” funnel adapter (shown) with drain tube that extends from 54” to 79” • Pressure regulator • Heavy duty wheels and casters • SHIP WEIGHT: 82 lbs. 329-08890 ASCOT NO. MFG. NO. 329-08890 8890 DESCRIPTION 24-Gal Waste Oil Drain with Pressurized Evacuation 329-08895 24-GALLON WASTE OIL DRAIN WITH PROBE KIT • 18 gallon suction capacity • 100 PSI shop air connected to vacuum gauge quickly creates suction • Large 16” collection funnel (4-7/8 gallon capacity) • Suction extraction at 1/2 gallon per minute • 78” suction and drain hoses • Pressurized evacuation of tank makes emptying easy • 70.8” maximum height • Six flexible evacuation probes and VW, Mercedes and BMW adapters • Two air ports: 1 for pressure, 1 for vacuum • SHIP WEIGHT: 93 lbs. ASCOT NO. MFG. NO. 329-08895 8895 DESCRIPTION 24-Gal Waste Oil Drain/Evacuator with Probe Kit BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION AUTO & FLEET SERVICE

AUTO & FLEET SERVICE 373 ROLLING FLOOR TRUCK DRAIN LOW PROFILE TRUCK OIL DRAIN WITH LID • Comes pre-assembled allowing for immediate use • Can be used for used motor oil or Antifreeze; decals provided for fluid identification • FEATURES: Two fixed wheels and 1 swivel caster, double baffles with upper screen and side splash lip • 3/4" or 1” Coupler kit sold separately • Holds 60 quarts • Equipped with 4 rollers and a handle for transport and positioning under trucks • Cover and curved side design help keep fluids from spilling during movement • Convenient handles and pour spout facilitate fluid evacuation • Rolls under most cab over axles so oil can be changed without jacks or jack stands • OVERALL HEIGHT: 7-1/2", WIDTH: 32-1/4", LENGTH: 49" 322-41203 322-19202 ASCOT NO. MFG. NO. DESCRIPTION 322-19202 19202 Low Profile Truck Oil Drain with Lid TRUCK & TRAILER WHEEL PAN • Prevents oil mess during wheel repair • The pan fits rims with 13 3/4" ID and larger • Handle compartments hold hub nuts out of the oil • Made of polypropylene for durability • Will not warp if oil is warm • CAPACITY: 88 ounces PREASSEMBLED EASY TO USE ASCOT NO. MFG. NO. CAPACITY DESCRIPTION 322-41203 322-41467 — 322-41206 322-41461 — 4120-003 5.2-Gallon Truck Drain for Antifreeze 4140-067 4120-006 26-Gallon Truck Drain for Motor Oil 4140-061 Cam-Lock Coupler, Adapter and Valve Kit (3/4") for 4120-003 drain 322-19852 Cam-Lock Coupler, Adapter and Valve Kit (1")for 4120-003 drain ASCOT NO. MFG. NO. 329-19852 19852 DESCRIPTION Truck & Trailer Wheel Pan ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE

374 AUTO & FLEET SERVICE Dr TRANSMISSION DRAIN FUNNEL • 22" by 23" heavy duty plastic lift drain funnel • Extends the catch area of any lift drain • Funnel catches any loose parts • Prevents parts from falling through drain 322-17892 ASCOT NO. MFG. NO. 322-17892 17892 DESCRIPTION Transmission Drain Funnel ASCOT NO. MFG. NO. 322-17922 17922 DESCRIPTION Multi-Drain Tub MULTI-DRAIN TUB • 30-quart, all purpose, heavy duty, plastic drain tub • For draining radiator, crankcase, transmission differential • Accommodate autos and trucks • Apron for washing and sorting parts 322-17922 4.5-GALLON OVAL DRAIN PAN DUNK TANKS • Heavy duty plastic tire and tube test tank • Features pyramid type ribs for extra support to prevent bowing • Handles passenger tire sizes to wide oval and light duty truck tires • New, smooth pan design is easy to wipe out and clean • 6.25" pan height to fit tight spaces • 1.125" outer diameter spout for quick and easy pouring of used fluids into most jugs • Anti-splash lip helps prevent spills when carrying or pouring • Multiple hand positions for carrying • Made of high density polyethylene material that is resistant to chemicals and solvents 322-19822 322-17972 322-17982 ASCOT NO. MFG. NO. 322-19822 322-02444 2400-10 2400-44 DESCRIPTION Passenger Car SUV/Light Truck ASCOT NO. MFG. NO. 322-17972 322-17982 17972 17982 DESCRIPTION Black Drain Pan (For Oil) Green Drain Pan (For Coolant) BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION AUTO & FLEET SERVICE

AUTO & FLEET SERVICE 375 SINGLE WALL UL-142 CUBE LUBE TANK 18-GALLON OIL LIFT DRAIN • UL listed tanks - double wall • If tank is for used oil, a high level tank monitor is recommended • Translucent jug holds 18 gallons and will not warp with hot oil • Rolls easily with four heavy-duty 2 1/2" wheels • Metal tubes extend working area from 36-1/2" to 77" • Drains from the bottom with a brass drain valve • Large 15" funnel has a built in strainer to catch drain plugs WILL NOT WARP WITH HOT OIL ASCOT NO. MFG. NO. 322-17432 17432 18-Gallon Oil Lift Drain 322-17432 DESCRIPTION ASCOT NO. MFG. NO. 322-00125 322-00200 322-00201 322-00250 322-00251 322-00300 322-00301 322-00350 322-00500 322-00650 322-00750 322-01000 DW125 DW200 DIMENSIONS (H X W X D) 38"x32"x26" 36"x60"x22" DW200V 60"x36"x22" DW250 38"x60"x31" 34"x60"x28" DW250V 60"x34"x28" DW300 DW300V 60"x38"x31" DW350V DW500 DW650 DW750 60"x41"x31" 60"x60"x33" 60"x78"x33" 60"x90"x33" DW1000 60"x118"x33" THICKNESS 12 Gauge 12 Gauge 12 Gauge 12 Gauge 12 Gauge 12 Gauge 12 Gauge 12 Gauge 12 Gauge 10 Gauge 10 Gauge 10 Gauge APPROX. WEIGHT 170 lb. 220 lb. 220 lb. 290 lb. 290 lb. 325 lb. 325 lb. 350 lb. 450 lb. 730 lb. 820 lb. 1,025 lb. ASCOT NO. MFG. NO. CAPACITY 322-24019 322-24026 2400-19 8-GALLON OIL LIFT DRAIN • This specially shaped, translucent jug holds 8 gallons • Reinforced base will not warp with hot oil • Has a wide working range from 36 1/2" to 74" • Its lower center of gravity increases stability and four 2 1/2" ball bearing wheels swivel and roll easily • Also has a heavyduty adjustment clamp, large handle and big pour spout with threaded cap • Large 15" funnel has strainer built-in to catch drain plugs • Base of funnel is 1 3/4" wide WILL NOT WARP WITH HOT OIL 8-GALLON OIL LIFT DRAIN • 8-gallon capacity • Spout for evacuation • Hand grips on bottom and top for ease in evacuation • Four 3-1/2" ball bearing wheels • Height adjusts from 48" to 71" • Polyethylene body is translucent for easy viewing of oil level 322-11102 ASCOT NO. MFG. NO. 322-11102 11102 DESCRIPTION 8-Gallon Oil Lift Drain ASCOT NO. MFG. NO. 322-24020 CAPACITY 2400-20 8-Gallon HEIGHT (MAX.) 71" HEIGHT (MIN.) 48" 322 18-GALLON OIL LIFT DRAIN • 18-gallon capacity • Four 3-1/2" ball bearing wheels • 3/4" evacuation valve • Spout for evacuation • Hand grips on bottom and top • Height adjusts from 48" to 71" • Polyethylene body is translucent for easy viewing of oil level • Oil Drain Pump not included 322-24026 HEIGHT (MAX.) 18-Gallon 71" 2400-26 Oil Drain Pump HEIGHT (MIN.) 48" ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE

376 AUTO & FLEET SERVICE Fluid Ex COOL-TECH 34288NI RECOVERY/ RECYCLING SYSTEM • AUTOMATIC OIL DRAIN: Automatically drains oil recovered during the recovery operation and puts the oil in a graduated container showing the user how much needs to be injected back into the system • AUTOMATIC AIR PURGE: Eliminates damaging air without monitoring gauges or opening valves • PROGRAMMABLE VACUUM FUNCTION: Defaults to 15 mins, programmable up to 99 mins. “Remaining time” is displayed • OPTIONAL REFRIGERANT & OIL DATABASE: A/C system capacities for North American market vehicles (Not included with the machine) PREMIUM 34988NI A/C RECOVER, RECYCLE AND RECHARGE MACHINE • Fully automatic recovery, vacuum leak test and recharge - no monitoring required • Patented automatic refrigerant refill prevents machine from emptying supply tank • Only machine with fully automatic oil injection • Two oil inject bottles for different oils to work on more vehicles with less down time • Large easy-to-read color display and printer standard • UV dye injection capability for leak detection • Automatic air purge eliminates system-damaging air 361-34988 361-34288 ASCOT NO. MFG. NO. 361-34288 DESCRIPTION 34288NI Recovery/ Recycling System DIMENSIONS SHIPPING WT. 50" H x 34" W 225 lb. COOL-TECH 34788NI RECOVERY/ RECYCLING SYSTEM • Fully automatic operation • 98.5% recovery • R134a • IMPROVED CHARGE PERFORMANCE: Exceeds SAE requirements • Graphical display • EXPANDABLE: Capable of additional feature and function add-ons (printer, wireless, refrigerant ID) • Automatic Internal tank fill EXPANDABLE 361-34788 ASCOT NO. MFG. NO. 361-34788 361-34789 34788NI 34788NI-H DESCRIPTION Recovery/Recycling System SHIPPING WT. 235 lb. Hybrid Recovery/Recycling System 222 lb. ASCOT NO. MFG. NO. 361-11234 DESCRIPTION AC1234-4 Premier R-1234yf Recover, Recycle and Recharge Machine PREMIER R-1234YF RECOVER, RECYCLE AND RECHARGE MACHINE • 98.5% recovery efficiency • Charge accur within +/- ½ oz. • FULLY AUTOMATIC OPERATION: Program for service, walk away and return when complete • Automatic internal tank refill. No stopping to fill the internal tank during service, or before service • Automatic oil drain shows how much oil was removed from the system during service • Integrated refrigerant identifier • Programmable vacuum operation helps get to the necessary vacuum level in any condition quickly • System leak test to identify gross leaks in a system • 5 × 9 cm (4.3-in. diag) Color graphical display • Exceeds SAE J2843 requirement for R-1234YF Recover, Recycle and Recharge equipment SHIPPING WT. 206 lb. ASCOT NO. MFG. NO. 361-34988 34988NI DESCRIPTION SHIPPING WT. Recovery/Recycling System 232 lb. BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION AUTO & FLEET SERVICE

AUTO & FLEET SERVICE 377 The FX Series is the new Gold Standard in Refrigerant Management. Quickly and efficiently recover, recycle, and recharge automotive A/C systems with the FX Series of Refrigerant Management Centers. FEATURES: 7" Color touch screen control panel, patented motor-controlled ball valves, patented oil-less compressor, 1-2-5 Warranty (1 year - Labor / 2 years - Parts / 5 years - Compressor), 30 lb. recovery tank, 6 CFM vacuum pump, Hybrid compatible, Thermal printer standard on all models *Setup and training are provided at no additional charge. FX134A REFRIGERANT MANAGEMENT SYSTEM • Certified to meet SAE J2788H for use in R134A systems FX1234 REFRIGERANT MANAGEMENT SYSTEM • Certified to meet SAE J2843 for use in R1234yf systems • Includes a Refrigerant Identifier FX3030 DUAL REFRIGERANT MANAGEMENT SYSTEM • Certified to meet SAE J3030 for use in R134a and R1234yf systems • Includes a Refrigerant Identifier • DUAL UNIT HANDLING BOTH REFRIGERANTS MOTORCONTROLLED BALL VALVES OIL-LESS COMPRESSOR 361-00134 ASCOT NO. MFG. NO. 361-00134 FX134A DESCRIPTION FX134A Refrigerant Management System ASCOT NO. MFG. NO. 361-01234 FX1234 DESCRIPTION FX1234 Refrigerant Management System ASCOT NO. MFG. NO. 361-03030 FX3030 DESCRIPTION FX3030 Refrigerant Management System ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE

378 AUTO & FLEET SERVICE Oil A RADIATOR FILLERS • Long curved spout, balanced shape and handle positions • Weather resistant plastic • 12-quart capacity 6-QT. OIL DISPENSER • Translucen polyethylene ma to read the liquid le • Marked in bo flexible 8" pouring spout enables eas transfer of liquid • T ASCOT NO. MFG. NO. DESCRIPTION 329-19732 19732 6-Quart Oil Dispenser 329-19732 WEATHERRESISTANT PLASTIC 329-00505 8-QT. OIL DISPENSER WITH LID & CAP • 8-Quart Dispenser with a spout cap and lid to keep out dirt, dust and other contaminants • Many large SUVs and trucks now require more oil — works great to transport bulk oil • Translucent white polyethylene material enables the user to read the oil level on the container up to 8 quarts and is marked in both quarts and liters • Flexible, removable 8" pouring spout enables easy transfer of liquid ASCOT NO. MFG. NO. 329-00505 DESCRIPTION 6110-010 CAPACITY Black Plastic Radiator Filler 12 Quarts WATER/ANTI-FREEZE BIBB 02 SPOUT CAP AND LID KEEPS DIRT OUT MARKED IN BOTH QUARTS & LITERS FULL VOLUME DISPENSE NOZZLE • Durable, full volume dispense nozzle for water, windshield wash and antifreeze • 1/4" NPT female inlet ASCOT NO. MFG. NO. DESCRIPTION 329-19702 19702 8-Quart Oil Dispenser with Lid & Cap ASCOT NO. MFG. NO. 329-18685 3340-014 Water/Anti-Freeze Bib DESCRIPTION BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION AUTO & FLEET SERVICE

AUTO & FLEET SERVICE 379 SLIP JOINT HANDLE OIL FILTER PLIERS • Two-position, slip-joint handle produces the range of three separate conventional filter wrenches • Overall range 2 1/4" to 4" • Jaws are bent at a 20-degree angle to fit more applications • Sure grip teeth prevent slipping • Cushioned handles provide comfort • OVERALL LENGTH: 11-1/2" HEAVY DUTY END CAP OIL FILTER WRENCHES End cap filter wrenches have been improved by adding welds to hold a steel disc to the top of the wrench. • Cup design allows easy filter removal and installation from the end of the filter, even in the tightest locations • End cap filter wrenches fit the most popular domestic and import vehicles • 14 flutes • Use with 3/8 in. square drive • These low-profile sockets are specially designed for operating clearance • Welded steel disc on top for extra strength • Heat treated steel • 3/8" drive 329-61570 HEATTREATED STEEL ASCOT NO. MFG. NO. 329-50750 50750 DESCRIPTION Slip Joint Handle Oil Filter Pliers ASCOT NO. MFG. NO. DESCRIPTION 329-61570 329-61600 61570 61600 Heavy Duty End Cap Oil Filter Wrench: 76 mm - 14 Flutes Heavy Duty End Cap Oil Filter Wrench: 65 mm - 14 Flutes SWIVEL GRIP OIL FILTER WRENCHES IMPORT CAR OIL FILTER WRENCH • Handle swivels to clear obstructions • Features the swivel handle, gripper “teeth” and 1" wide stainless steel band • The swivel handle makes it easy to turn filters in hard to reach locations • Vinyl covered handle HANDLE SWIVELS FOR EASE OF USE WORKS IN TIGHT SPOTS • Fits filters from 2 1/2" to 3 1/8" • Removes all oil filters from 2 1/2" to 3 1/8" in diameter • This extra large range enables the 63600 wrench to fit most all import car filters plus the common 3" domestic car filters • Steel jaws grip filter without slipping • Works in tight spots from the front of the filter using 3/8" drive NON-SLIP STEEL JAWS 329-63600 329-53500 ASCOT NO. MFG. NO. DESCRIPTION 329-53500 329-53700 53500 53700 Standard Swivel Grip Oil Filter Wrench: 3.5" - 3.875" Range Small Swivel Grip Oil Filter Wrench: 2.875" - 3.25" Range ASCOT NO. MFG. NO. 329-63600 63600 DESCRIPTION Import Car Oil Filter Wrench ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE

380 AUTO & FLEET SERVICE S FACE SHIELDS ASCOT NO. 396-14955 396-14200 396-21000 MFG. NO. 14955 14200 21000 DESCRIPTION 170-SB Crown and Window Kit MAXVIEW™ Premium Face Shield - Clear Window GPL500 Premium Goggle with Flip-Up Detachable Shield - Clear Lens, Anti-Fog 396-14200 396-14955 SAFETY GLASSES • Lightweight, stylish, comfortable and very affordable • High impact optically correct wrap style unitary PC lens offers superior coverage • Soft, flexible temple tips & soft nose piece offers all day comfort • Temples are curved inwards to ensure comfortable, slip-resistant fit • Temple tips are curved outwards for gentle placement and removal • Meets ANSI Z87.1-2015 and tested to U.S. Military Standard MIL-PRF-31013 • Available in clear/black, amber/black and smoke/black styles ASCOT NO. 396-73601 396-73611 396-73621 MFG. NO. S73601 S73611 S73621 DESCRIPTION Sellstrom XM330 Safety Glasses - Clear/Black Sellstrom XM330 Safety Glasses - Amber/Black Sellstrom XM330 Safety Glasses - Smoke/Black 396-73601 396-21000 HEARING PROTECTION ASCOT NO. 396-20773 MFG. NO. 20773 396-73611 DESCRIPTION Jackson H70 Vibe Earmuffs - Orange FEATURES Highly padded ear cups for all day comfort, Dielectric, durable thermoplastic material retains shape and pressure, Great for environments such as lawn mowers, industrial work, traffic noise, etc. 396-23412 S23412 Sellstrom Disposable Ear Plugs - FOAM Bullet Shape, Corded, Hi-Viz Green (100 pairs per box) 396-23421 S23421 Sellstrom Reusable Ear Plugs - Tapered, Corded, Blue/Hi-Viz Green (100 pairs per box) 396-23430 S23430 Sellstrom Banded Ear Plugs - Tapered, Hi-Viz Green (1 per bag) Gently but quickly expand to fit ear canal, Soft nonirritating PU foam for max comfort, Independently tested/certified to NRR 32 (ANSI S3.19). CSA Class AL. Ensure optimum ear canal coverage, Firm push/pull post for easy insertion/ removal, Reusable - Can be washed and reused, Nonallergenic polymer materials 396-20773 Wear around the neck when not in use, Regular and intermittent applications - Easily removed, Band shape curves at the plug end to keep pods up and clean when not in use 396-73621 396-23430 396-23421 BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION AUTO & FLEET SERVICE

AUTO & FLEET SERVICE 381 TEAR AWAY MESH SAFETY VESTS EYE WASH STATIONS • Meets visibility standards and requirements for medium risk traffic control and public safety workers, including school crossing guards, survey crews and more • COOLING COMFORT - Polyester mesh is breathable, durable and keeps you cool on the job • HI-VIS - Includes StarTech reflective tape for excellent visibility • Features 5 point tear-away and D-ring access slot 396-30561 • The ideal first response solution when continuous water supply is unavailable • Quickly flushes contaminants from eyes using a sterile, buffered & preserved solution • Can be wall-mounted or placed on flat surfaces • Highly visible green backboard • Available in 6 gallon personal station or 32 oz. bottle station 396-90306 396-30551 396-90333 ASCOT NO. MFG. NO. 396-30551 396-30552 396-30553 396-30554 396-30561 396-30562 396-30563 396-30564 DESCRIPTION V1030550U-S/M V1030550U-L/XL V1030550U-2/3XL V1030550U-4/5XL V1030560U-S/M V1030560U-L/XL V1030560U-2/3XL V1030560U-4/5XL Safety Vest - Hi-Vis Orange, Size S/M Safety Vest - Hi-Vis Orange, Size L/XL Safety Vest - Hi-Vis Orange, Size 2XL/3XL Safety Vest - Hi-Vis Orange, Size 4XL/5XL Safety Vest - Hi-Vis Yel/Green, Size S/M Safety Vest - Hi-Vis Yel/Green, Size L/XL Safety Vest - Hi-Vis Yel/Green, Size 2XL/3XL Safety Vest - Hi-Vis Yel/Green, Size 4XL/5XL ASCOT NO. MFG. NO. 396-90306 396-90333 KNEE PADS - ULTRA FLEX III • Articulating hinge ensures proper placement all day • Soft elastic and wide straps are well placed and above the knee - No velcro • Strong & flexible plastic outer shells • Pads offer 5/8" closed cell foam pad, Sweat will not penetrate • Built for years of hard work and heavy use 396-96110 S90306 S90333 DESCRIPTION Sellstrom 6-Gallon Gravit-Eye Portable Eyewash Station Sellstrom 32 oz. Double Rapid-Clear Eyewash Bottle Station DOT CONSPICUITY TAPE • Meets all Federal and State certifications • Micro prisma technology • Thin and flexible • 10-year durability 396-62150 ASCOT NO. 396-96110 MFG. NO. S96110 DESCRIPTION KneePro Ultra Flex III Knee Pads - Grey/Orange ASCOT NO. 396-62150 396-72182 396-72150 396-82150 396-92150 396-93150 MFG. NO. CT6R6W2150 CT11R7W2X18 CT11R7W2150 CTR2150 CTW 2150 CTY2150 DESCRIPTION 2" x 150' (6" Red, 6" Silver) 2" x 18" Strip (11" Red, 7" Silver) 2" x 150' (11" Red, 7" Silver) 2" x 150' Solid Red 2" x 150' Solid Silver 2" x 150' Solid Yellow ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE

382 AUTO & FLEET SERVICE W URETHANE WHEEL CHOCKS RUBBER WHEEL CHOCK • Durable rubber construction • Features an eye bolt for chain or rope attachment • Ribbed pyramid design • Either side of wheel chock can be positioned against the tire • Sold individually • WEIGHT: 10 lb. (4.5kg) • SOLID LIGHTWEIGHT CONSTRUCTION • High impact urethane material • Non-conductive, no threat to puncture the tire • Durable, lightweight and easy to use • Extensively field tested HIGH IMPACT URETHANE 396-15336 396-15300 ASCOT NO. MFG. NO. 396-15300 15300 DESCRIPTION Rubber Wheel Chock 396-15338 OTR WHEEL CHOCK • DIMENSIONS: 12" x 10" x 12" • Designed for heavy duty truck and mining equipment • 20" rope attached for convenience • NET WEIGHT: 27.5 lb. 396-15342 396-15353 ASCOT NO. MFG. NO. TIRE SIZE 396-15336 15336 396-15337 396-15338 396-00102 15337 15338 396-15339 15339 396-15342 ASCOT NO. MFG. NO. 396-00102 TS102 DESCRIPTION 396-15353 OTR Wheel Chock 15353 15342 35" to 55" (90 cm to 140 cm) 47" to 86" (120 cm to 220 cm) 70" to 118" (180 cm to 300 cm) 110" to 165" (280 cm to 420 cm) 86" to 137.8" (220 cm to 350 cm) 47" to 70" (120 cm to 180 cm) DIMENSIONS (LXWXH) 13.3" x 8.6" x 7.8" (34 cm x 22 cm x 20 cm) 18" x 12" x 9" (47.5 cm x 30.5 cm x 22.5 cm) 22.5" x 13" x 14" (57 cm x 34 cm x 35.5 cm) 26.7" x 13" x 14" (68 cm x 33.7 cm x 35.5 cm) 24" x 13.5" x 12" (62.1 cm x 34.3 cm x 32.3 cm) 13.38" x 9.84" x 7.8" (34 cm x 25 cm x 22.5 cm) WEIGHT 7.7 lb. (3.5 kg) 13 lb. (6 kg) 19.8 lb. (9 kg) 30.86 lb. (14 kg) 24.3 lb. (11 kg) 13.66 lb. (6.2 kg) BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION AUTO & FLEET SERVICE

AUTO & FLEET SERVICE 383 Glo POWDER FREE NITRILE GLOVES • For industrial and automotive applications • Powder-free • THICKNESS: 4.5 mil • QUANTITY: 100 per box, 10 boxes per case ASCOT NO. MFG. NO. 396-00802 396-00803 396-00804 396-00805 BLK-M BLK-L BLK-XL BLK-XXL DESCRIPTION Black Nitrile Gloves (Medium) Black Nitrile Gloves (Large) Black Nitrile Gloves (XL) Black Nitrile Gloves (XXL) RPG NITRILE MICRODIAMOND GLOVES • Textured finish • For indus automotive applications • Powder-free • THICKNESS: 6 mil Not made from natural rubber latex • QUANTITY: 100 per box, 10 boxes per case ASCOT NO. MFG. NO. 396-00301 396-00302 396-00303 396-00304 396-00305 396-00401 396-00402 396-00403 396-00404 396-00405 DESCRIPTION 32806BK240R2 32806BK240R3 32806BK240R5 Micro Diamond Black Nitrile Glove (Small) Micro Diamond Black Nitrile Glove (Medium) 32806BK240R4 Micro Diamond Black Nitrile Glove (Large) Micro Diamond Black Nitrile Glove (XL) 32806BK240R6 Micro Diamond Black Nitrile Glove (XXL) 32806OR240R2 Micro Diamond Orange Nitrile Glove (Small) 32806OR240R3 Micro Diamond Orange Nitrile Glove (Medium) 32806OR240R4 Micro Diamond Orange Nitrile Glove (Large) 32806OR240R5 Micro Diamond Orange Nitrile Glove (XL) 32806OR240R6 Micro Diamond Orange Nitrile Glove (XXL) HIGH VISIBILITY MECHANICS GLOVES RPG MECHANIC'S GLOVES • Black synthetic leather palm with small patches • Features blue spandex on back, neoprene on knuckle, 4cm wide elastic, hook & loop • Grey synthetic leather with silicon printing on palm • High visibility Spandex back with back of the hand protection • Impact protection • Hook and loop • One size fits most 396-0030 396-00401 396-14201 396-14202 ASCOT NO. DESCRIPTION 396-10011 RPG Mechanic's Gloves 396-10011 ASCOT NO. MFG. NO. DESCRIPTION 396-14201 396-14202 FGM-420 Green/Black Mechanics Gloves - Pair FOM-420 Orange/Black Mechanics Gloves - Pair ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE AUTO & FLEET SERVICE

384 AUTO & FLEET SERVICE Glo COLORED LEATHER DOUBLE PALM WORK GLOVES • Split leather double palm • Colored fabric on the back of the hand • Half fleece lining • 12 pairs per package WORK GLOVES Gaither’s Work Gloves are designed to provide the best possible protection while still delivering the grip and flexibilit required for performing intric complex tasks. • Perfect for tire maintenance and gener shop use • Machine washable • Impact protection • Double Stitched • Industrial grade hook and loop • Slip-free silicone grip ASCOT NO. MFG. NO. 396-49101 396-49102 396-49103 396-49104 G49110S G49110L DESCRIPTION Small Work Gloves G49110M Medium Work Gloves Large Work Gloves G49110XL Xtra Large Work Gloves 396-55222 MISCELLANEOUS HAND PROTECTIVE GLOVES ASCOT NO. MFG. NO. DESCRIPTION 396-55221 396-55222 AB-R AB-G Red Leather Double Palm Work Gloves Green Leather Double Palm Work Gloves 396-55221 HIGH VISIBILITY DUAL COLOR LEATHER DOUBLE PALM GLOVES • Split leather double palm • High visibility green and orange colors • Half fleece lining • 12 pairs per package 396-40317 396-06780 396-55220 ASCOT NO. 396-40317 396-55220 DESCRIPTION 396-06780 Wet Grip Neoprene Glove. Protects Against Acids,Caustics, Oils, Greases And Many Solvents. 5-Piece Flannel Liner Power Grip with Latex Premium Grip Leather Palm Glove with Safety Cuff, Elastic ASCOT NO. MFG. NO. 396-55223 DESCRIPTION 396-55223 AB-HVDC High Visibility Dual Color Leather Double Palm Gloves BUYER'S GUIDE ASCOT SUPPLY CORPORATION SUPPLY CORPORATION AUTO & FLEET SERVICE

TIRE REPAIR MATERIALS 385 Cements, Sealants & Patches Air Buffers & Drills Tire Repair Tools & Accessories Tire Spreaders & Repair Stations Cabinets & Storage ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE

386 TIRE REPAIR Cements, Sealants & Patches RADIAL RX REINFORCED PATCHES • Specially designed for small nail hole repair on radial passenger, performance, light truck and truck tires • Perfect for tread area and sidewall repair RAD-100 SERIES RADIAL REPAIR UNIT • REMA TIP TOP offers a variety of radial-ply repair units to meet the diverse demands of today’s passenger, truck, and OTR tire applications • Due to our fully-integrated blue bonding layer and center over injury design, REMA TIP TOP Radial-Ply repair units are suitable for use with all current vulcanizing systems • For best results, always select the corresponding REMA TIP TOP Stem insert unit, carbide cutter and Special Cement BL (non flammable) or Special Blue Cement (flammable) product for a permanent, reliable repair ASCOT NO. MFG. NO. 571-00010 RAD-0 571-00011 RAD-1N DESCRIPTION Reinforced Nail Hole Patch Reinforced Nail Hole Patch SIZE (IN.) 1-9/16" x 1-9/16" 2-3/4" x 2" QTY./ UNIT 10 20 SECTION REPAIR ID PATCHES • Universally accepted method for marking section repairs on radial truck tires • Blue triangle identification patches are a must for any dealer, retreader or fleet performing sidewall, shoulder or tread area section repairs UNIVERSAL ACCEPTED METHOD ASCOT NO. MFG. NO. 569-00090 569-00091 90 90B DESCRIPTION Section ID Patches Section ID Patches QTY./UNIT 50 1000 ASCOT NO. MFG. NO. 575-00110 575-00115 575-00116 576-00120 576-00122 576-00124 576-00125 576-00128 576-00135 576-00140 576-00142 576-00144 577-00146 577-00150 577-00152 577-00155 577-00156 577-00160 577-00162 577-00165 577-00168 577-00175 577-00180 577-00182 577-00184 577-00185 577-00186 577-00188 577-00190 DESCRIPTION RAD-110 RAD-115 RAD-116 RAD-120 RAD-122 RAD-124 RAD-125 RAD-128 RAD-135 RAD-140 RAD-142 RAD-144 RAD-146 RAD-150 RAD-152 RAD-155 RAD-156 RAD-160 RAD-162 RAD-165 RAD-168 RAD-175 RAD-180 RAD-182 RAD-184 RAD-185+ RAD-186 RAD-188 RAD-190 Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit Radial repair unit PLIES 1 1 1 2 2 2 3 3 4 3 4 4 4 5 5 5 7 7 7 6 7 8 2 3 3 8 2 2 2 SIZE (IN.) 2 x 2-3⁄4 3-1⁄2 x 3 2-5⁄8 x 4 4-7⁄8 x 3 6-7⁄8 x 3 8-1⁄2 x 3 4-1⁄2 x 4-7⁄8 2-7⁄8 x 13-1⁄8 5-7⁄8 x 8 7-7⁄8 x 3-15⁄16 10-1⁄4 x 5 13 x 5 7-1⁄4 x 17-1⁄4 23 x 7-1⁄8 23 x 9-1⁄2 10-1⁄4 x 13-1⁄8 29 x 10-1⁄2 40 x 10-1⁄4 13 x 41-1⁄4 13-1⁄8 x 16-3⁄4 14 x 30-3⁄8 18 x 21-3⁄4 7-3⁄4 x 6 10 x 7-1⁄2 11-1⁄2 x 8-1⁄2 28-3⁄4 x 20-7⁄8 13-1⁄2 x 9-3⁄4 18 x 11-1⁄4 22 x 15-3⁄8 QTY./ UNIT 20 20 10 10 10 10 10 10 10 10 10 10 5 5 3 5 3 3 1 3 1 3 5 5 5 1 5 5 3 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 387 RADIAL TIRE REPAIR UNITS (ARAMID) • Today’s varied tire designs, unique wheel applications and demanding driving conditions require a broad range of tire repair products. REMA TIP TOP’s ARAMID repair units are lightweight, provide optimal flexibility and will prove to be the most reliable truck repair units you have ever handled • For best results, always select the corresponding REMA TIP TOP Stem insert unit, carbide cutter & Special Blue Cement (flammable) for a permanent, reliable repair • Precise contour suits critical positions in low-profile tires • High strength ARAMID belts do not elongate, thus reducing repair bulge RAD 500 ARAMID REPAIR UNITS FOR AGRICULTURAL TIRES • Easier application due to an increased flexibility • Less heat generation • Optimized weight, therefore less influence on the tires balance and a better rolling behavior • Better dynamic behavior which avoids tensions between tire and patch • Repair material for the new generation of Agricultural tires (high speed, low pressure) • Can be used in a Chemical or Heat Cure environment EASIER APPLICATION LIGHT IN WEIGHT, FLEXIBLE & RELIABLE Magnified view of the 576-00535 ASCOT NO. MFG. NO. 576-00581 ASCOT NO. MFG. NO. 576-00531 RAD-531 Aramid 576-00533 576-00535 576-00537 576-00539 RAD-533 Aramid RAD-535 Aramid RAD-537 Aramid RAD-539 Aramid DESCRIPTION Radial Repair Unit for Low Profile Tires Radial Repair Unit for Low Profile Tires Radial Repair Unit for Low Profile Tires Radial Repair Unit for Low Profile Tires Radial Repair Unit for Low Profile Tires SIZE (IN.) 3-7/16 x 6-1/2 4-3/8 x 8 4-3/8 x 10 4-3/8 x 11-1/4 4-1/2 x 12-3/4 QTY./UNIT 10 10 10 10 576-00589 10 RAD-589 ARAMID 576-00583 576-00585 576-00587 RAD-581 ARAMID RAD-583 ARAMID RAD-585 ARAMID RAD-587 ARAMID Radial Repair Unit for Agricultural Tires Radial Repair Unit for Agricultural Tires Radial Repair Unit for Agricultural Tires Radial Repair Unit for Agricultural Tires Radial Repair Unit for Agricultural Tires 23.75 x 13.5 603 x 343 3 18 x 11.3 458 x 288 5 14.25 x 9.1 363 x 233 5 10 x 8 258 x 203 5 8.2 x 6.6 208 x 168 5 DESCRIPTION SIZE (IN.) SIZE (MM) QTY./ UNIT WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

388 TIRE REPAIR Cements, Sealants & Patches (cont.) REMA RED EDGE TUBE PATCHES • Feature double-scalloped feathered edges to ensure perfect bonding and complete vulcanization • A unique rubber compound allows the patch to stretch evenly and equally in all directions • Use vulcanizing fluid 203 or 204 REMA STEM INSERTS AND ACCESSORIES • REMA TIP TOP’s pre-cured, self-vulcanizing inserts are specially contoured for easy installation • For best results always select the corresponding REMA TIP TOP repair unit, carbide cutter and Special Blue Cement (flammable) for a permanent, reliable repair 582-19420 541-00410 541-00400 541-00420 582-19621 541-00440 541-00450 541-00430 541-00470 541-00460 541-00472 ASCOT NO. MFG. NO. 541-00400 541-00410 541-00420 541-00430 541-00440 541-00450 541-00460 541-00470 541-00472 0 1 2 3 4 5 6 7 7B DESCRIPTION 1-1/4" Round Tube 1-1/2" Round Tube 1-3/4" Round Tube 2" Round Tube 3" Round Tube 3-3/4" Round Tube 4" Round Tube 3" x 1-1/2" Oval Tube 6" x 2" Oval Tube UNITS/BOX 100 30 30 30 30 10 10 30 10 ASCOT NO. MFG. NO. 582-19621 582-19820 582-19420 582-19430 582-19311 582-19410 468-01120 RS-8 RS-10 RS-12 194 VT-1120L DESCRIPTION 193-WL-10 REMA STEM 6 (Wire Lead) REMA STEM 8 REMA STEM 10 REMA STEM 12 193-WL-50 REMA STEM 6 (Wire Lead) INJURY (IN.) QTY./UNIT max 1/4 10 max 5/16 max 3/8 max 1/2 max 1/4 REMA STEM 8 (RS-8) max 5/16 Insertion Pulling Wires (626) 60 20 20 50 10 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 389 REMA MINICOMBI REPAIR UNITS & ACCESSORIES UNIVERSAL PATCH • REMA TIP TOP’s most popular unit for crown repair of passenger/ light truck tires • Our MINICOMBI’s are available in a wide range of sizes and establish new standards in one-piece repair technology • For best results always use with REMA TIP TOP carbide cutters and Special Blue Cement (flammable) for a permanent, reliable repair • Improved Blue coating enhances the bonding process • REMA TIP TOP’s rubber-reinforced, universal repair units are specially formulated to provide maximum flexibility and strength • These non-directional, center over injury repair units perform flawlessly in both radial or bias-ply tire designs • For best results, always select the corresponding REMA TIP TOP Stem insert unit, carbide cutter and Special Blue Cement (flammable) product for a permanent, reliable repair MAXIMUM FLEXIBILITY 581-67010 581-67045 MAXIMUM STRENGTH 581-67050 581-67308 550-26707 550-26714 581-68020 581-68008 550-26721 ASCOT NO. MFG. NO. 537-00190 537-00199 581-67050 581-67010 581-67045 581-67340 581-67308 581-68008 581-68020 581-68418 581-68406 190 199 A3 A3-R A4.5 A6 A6-R B8-MC B8-MC-R B10 B10-R DESCRIPTION Awl for Remastem & Minicombi Repairs Rasp for Remastem & Minicombi Repairs 1/8" Minicombi 1/8" Minicombi 3/16" Minicombi 1/4" Minicombi 1/4" Minicombi 5/16" Minicombi 5/16" Minicombi 3/8" Minicombi 3/8" Minicombi UNITS/ BOX — — 550-26745 50 10 40 40 8 20 8 20 6 ASCOT NO. MFG. NO. 550-26707 550-26714 550-26721 550-26738 550-26745 550-26752 UP-3 UP-4.5P UP-6 UP-6P UP-8 UP-8P SIZE 1/8" 3/16" 1/4" 1/4" 5/16" 5/16" QTY. 100 300 in Pail 50 200 in Pail 50 150 in Pail WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

390 TIRE REPAIR Cements, Sealants & Patches (cont.) AGRICULTURAL AND OTR TIRES/ PN SERIES BIAS-PLY REPAIR UNITS • 90° cord angle of the plies provides greater compatibility with the flexing action of the tire as it operates under load, plus it also makes the patch more flexible for easier installation • A new concept in rubber compounding of the ply-end cover strip eliminates cord breakout at the end of the plies • Two different ply levels for each size patch provide better compatibility of the repair unit to the ply rating of the tire • Flexibility in patch/injury size optimization for improved performance • Eliminates need for “S” (Sidewall) patches in the smaller sizes • Reduced buffing requirement due to the smaller size of the patch • Use Blue Bonding cement REMA TIP TOP BIAS-PLY TIRE REPAIR UNITS • REMA TIP TOP offers a wide MORE FLEXIBLE selection of bias-ply (cross-ply) repair units for applications on passenger, truck, OTR, agricultural and industrial bias-ply tires • Due to our fully-integrated blue bonding layer, REMA TIP TOP bias-ply repair units are suitable for use with all current vulcanizing systems • For best results, always select the corresponding REMA TIP TOP Stem insert unit, carbide cutter and Special Blue Cement (flammable) for a permanent, reliable repair 568-05000 # 568-05200 568-05400 # ASCOT NO. MFG. NO. 568-05000 568-05010 568-05200 568-05210 568-05400 568-05410 568-05600 568-05610 567-05620 568-05800 568-05810 567-05820 567-05821 PN-50 PN-050+ PN-052 PN-052+ PN-054 PN-054+ PN-056 PN-056+ PN-056S PN-058 PN-058+ PN-058S PN-058S+ SIZE (IN.) 9-1/2" 9-1/2" 14" 14" 19" 19" 26" 26" 26" 32" 32“ 32" 32“ SIZE (MM) 240mm 240mm 360mm 360mm 480mm PLIES 4 6 6 8 8 480mm 10 660mm 10 660mm 12 660mm 10 810mm 810mm 810mm 810mm 12 14 12 14 QTY./ BOX 3 3 3 3 2 2 2 2 2 1 1 1 1 ASCOT NO. MFG. NO. 562-26006 562-26037 562-26044 562-26051 562-26068 562-26075 562-26082 562-26099 562-26109 563-00200 563-00210 563-00220 563-00230 563-00240 563-00250 563-00400 563-00410 563-00420 562-26212 562-26213 562-26314 562-26315 PN-0 PN-3 PN-4 PN-5 PN-6 PN-7 PN-8 PN-9 PN-10 PN-20 PN-21 PN-22 PN-23 PN-24 PN-25 PN-40 PN-41 PN-42 FRU1-MP FRU1-P FRU2-MP FRU2-P SIZE (IN.) 1-9⁄16 4 5-3⁄4 6-1⁄2 9-1⁄4 11-3⁄4 13-1⁄2 15-1⁄2 17-3⁄4 10 14-1⁄2 20 10 14-1⁄2 20 7 8-3⁄4 10-1⁄4 2-1/2 2-1/2 3-1/4 3-1/4 SIZE (MM) 39.7 101.6 146 165 235 298.5 343 393 450.8 254 368.3 508 254 368.3 508 177.8 222.3 260.3 63 63 82.55 82.55 PLIES 1 2 2 4 6 6 6 8 8 4 4 4 6 6 6 4 6 8 1 1 2 2 QTY./ BOX 50 10 10 10 10 10 5 3 3 10 5 3 10 5 3 2 2 2 25 100 25 100 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 391 REMA GTR RADIAL REPAIR UNITS • These repair units are designed for use in section repairs in RADIAL OTR TIRES • They are intended for use in heat cure systems (Autoclaves, Section Molds, Molds or Strap Type Curing Systems) • Their “center over injury” design makes them a very convenient and easy type of repair • Used with uncured black floater gum, they provide added adhesion in all types of repairs • SHELF LIFE FOR UNCURED & HEAT CURE REPAIR UNITS: 1 Year from Date of Manufacture; Clothback REPAIR UNITS: 4 Years from Date of Manufacture REMA GTR BASKET RADIAL REPAIR UNITS FOR RADIAL OTR TIRES "CENTER OVER INJURY" DESIGN • These repairs are designed to give the needed flexibility and extra support for shoulder and sidewall injuries of RADIAL OTR TIRES • They provide the ability to repair larger injuries than standard radial “center over the injury” repair units • SHELF LIFE FOR UNCURED & HEAT CURE REPAIR UNITS: 1 Year from Date of Manufacture; Clothback REPAIR UNITS: 4 Years from Date of Manufacture FOR RADIAL OTR TIRES "CENTER OVER INJURY" DESIGN 526-10052 525-10138 526-12046 525-11348 # ASCOT NO. MFG. NO. DESCRIPTION SIZE (IN.) SIZE (MM) GTR RADIAL REPAIR UNITS - UNCURED 526-10046 10 046 RU GTR - UC 46 16 x 5 405 x 125 526-10050 10 050 RU GTR - UC 50 22 x 7.5 560 x 190 526-10052 10 052 RU GTR - UC 52 22 x 9.5 560 x 240 526-10056 10 056 RU GTR - UC 56 28 x 10.5 710 x 265 526-10060 10 060 RU GTR - UC 60 38 x 10.5 965 x 265 GTR RADIAL REPAIR UNITS - HEAT CURE 526-12046 12 046 RH GTR - HC 46 16 x 5 405 x 125 526-12050 12 050 RH GTR - HC 50 22 x 7.5 560 x 190 526-12052 526-12056 12 052 RH GTR - HC 52 22 x 9.5 560 x 240 12 056 RH GTR - HC 56 28 x 10.5 710 x 265 526-12060 12 060 RH GTR - HC 60 38 x 10.5 965 x 265 GTR RADIAL REPAIR UNITS - CLOTHBACK 12 046 RC GTR - CB 46 16 x 5 405 x 125 12 050 RC GTR - CB 50 22 x 7.5 560 x 190 12 052 RC GTR - CB 52 22 x 9.5 560 x 240 12 056 RC GTR - CB 56 28 x 10.5 710 x 265 12 060 RC GTR - CB 60 38 x 10.5 965 x 265 526-12146 526-12150 526-12152 526-12156 526-12160 4 5 6 7 8 4 5 6 7 8 4 5 6 7 8 5 5 2 2 2 5 5 2 2 2 5 5 2 2 2 # ASCOT NO. MFG. NO. DESCRIPTION 525-10136 10 016 BRU GTR-B - UC 016 SIZE (IN.) SIZE (MM) GTR BASKET RADIAL REPAIR UNITS - UNCURED 16 x 5 405 x 125 525-10137 10 020 BRU GTR-B - UC 020 20 x 9 510 x 230 525-10138 10 027 BRU GTR-B - UC 027 27 x 10 685 x 255 525-10139 10 038 BRU GTR-B - UC 038 38 x 10 965 x 255 GTR BASKET RADIAL REPAIR UNITS - HEAT CURE 12 016 BRH GTR-B - HC 016 525-11345 12 027 BRH GTR-B - HC 027 16 x 5 405 x 125 525-11346 12 080 BRH GTR-B - HC 020 20 x 9 510 x 230 525-11347 525-11348 525-11349 525-11350 525-11351 525-11352 16 x 5 405 x 125 27 x 10 685 x 255 12 038 BRH GTR-B - HC 038 38 x 10 965 x 255 GTR BASKET RADIAL REPAIR UNITS - CLOTHBACK 12 016 BRC GTR-B - CB 016 12 020 BRC GTR-B - CB 020 20 x 9 510 x 230 12 027 BRC GTR-B - CB 027 27 x 10 685 x 255 12 038 BRC GTR-B - CB 038 38 x 10 965 x 255 PLIES 5 5 2 2 5 5 2 2 5 5 2 2 QTY./ BOX 6 6 7 7 6 6 7 7 6 6 7 7 PLIES QTY./ BOX WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

392 TIRE REPAIR Cements, Sealants & Patches (cont.) REMA OTR BASKET BIAS REPAIR UNITS • The OTR-B-UC unit is engineered and constructed to create maximum flexibility • The ply strips are positioned in a basket weave pattern creating the strength and flexibility needed for reinforcement or section repair • SHELF LIFE FOR UNCURED & HEAT CURE REPAIR UNITS: 1 Year from Date of Manufacture; Clothback REPAIR UNITS: 4 Years from Date of Manufacture MAXIMUM FLEXIBILITY COLD VULCANIZING FLUID • Designed for the vulcanization of tube patches, valve patches and rubber-based tube valve repair units BASKET WEAVE 501-00203 PATTERN ASCOT NO. MFG. NO. 501-00201 501-00202 501-00203 201 202 203-F 501-00204 501-00205 526-11118 ASCOT NO. MFG. NO. DESCRIPTION 526-11136 # SIZE (IN.) SIZE (MM) OTR BASKET BIAS REPAIR UNITS - UNCURED 526-11115 10 104 BU OTR-B - UC 04 7.5 x 7.5 190 x 190 10 526-11116 10 106 BU OTR-B - UC 06 9.75 x 9.75 245 x 245 526-11117 10 108 BU OTR-B - UC 08 12.25 x 12.25 310 x 310 526-11118 10 110 BU OTR-B - UC 010 14.25 x 14.25 360 x 360 5 526-11119 10 112 BU OTR-B - UC 012 16.25 x 16.25 410 x 410 526-11120 10 114 BU OTR-B - UC 014 18.25 x 18.25 465 x 465 526-11121 10 116 BU OTR-B - UC 016 20.25 x 20.25 515 x 515 526-11122 10 118 BU OTR-B - UC 018 22.75 x 22.75 575 x 575 526-11123 10 120 BU OTR-B - UC 020 26.75 x 26.75 680 x 680 1 OTR BASKET BIAS REPAIR UNITS - HEAT CURE 5 5 2 1 526-11124 12 104 BH OTR-B - HC 04 7.5 x 7.5 190 x 190 10 526-11125 12 106 BH OTR-B - HC 06 9.75 x 9.75 245 x 245 526-11126 12 108 BH OTR-B - HC 08 12.25 x 12.25 310 x 310 526-11127 12 110 BH OTR-B - HC 010 14.25 x 14.25 360 x 360 5 526-11128 12 112 BH OTR-B - HC 012 16.25 x 16.25 410 x 410 526-11129 12 114 BH OTR-B - HC 014 18.25 x 18.25 465 x 465 526-11130 12 116 BH OTR-B - HC 016 20.25 x 20.25 515 x 515 526-11131 12 118 BH OTR-B - HC 018 22.75 x 22.75 575 x 575 526-11132 12 120 BH OTR-B - HC 020 26.75 x 26.75 680 x 680 1 OTR BASKET BIAS REPAIR UNITS - CLOTHBACK 5 5 2 1 10 10 10 10 4 6 6 8 8 10 10 12 14 4 6 6 8 8 10 10 12 14 526-11133 12 104 BC OTR-B - CB 04 7.5 x 7.5 190 x 190 10 526-11134 12 106 BC OTR-B - CB 06 9.75 x 9.75 245 x 245 526-11135 12 108 BC OTR-B - CB 08 12.25 x 12.25 310 x 310 526-11136 12 110 BC OTR-B - CB 010 14.25 x 14.25 360 x 360 5 526-11137 10 10 12 112 BC OTR-B - CB 012 16.25 x 16.25 410 x 410 5 5 2 1 526-11138 12 114 BC OTR-B - CB 014 18.25 x 18.25 465 x 465 526-11139 12 116 BC OTR-B - CB 016 20.25 x 20.25 515 x 515 526-11140 12 118 BC OTR-B - CB 018 22.75 x 22.75 575 x 575 526-11141 12 120 BC OTR-B - CB 020 26.75 x 26.75 680 x 680 1 4 6 6 8 8 10 10 12 14 ASCOT NO. MFG. NO. 505-00071 505-00170 505-00171 71 70F 71-F 532-06020 532-06021 6020 6021 DESCRIPTION PLIES QTY./ BOX PRE-BUFF CLEANER • Specially formulated to dissolve moldrelease lubricants and other contaminants creating a clean surface prior to innerliner buffing • Available in spout-top liquid or spray-top aerosol dispensers • CFC-free formula requires shorter drying times • Same formula for tube or tire preparation 505-00171 QTY./ BOX Pre-Buff Rubber Cleaner 1 Qt. Spout Top Can 6 Pre-Buff Cleaner (Flammable) - 16 Oz. Pre-Buff Cleaner (Flammable) - 1 Qt. Spout Top Can 16 Oz. Aluminum Cement Dispenser with Brush Top Replacement Brush Lid for 6020 Cement Dispenser 1 — 12 6 204-F 205 DESCRIPTION Cold Vulcanizing Fluid 25 Gm. Tube Cold Vulcanizing Fluid 50 Gm. Tube w/Brush Cold Vulcanizing Fluid, Flammable, 8 Oz. Can w/ Brush Cold Vulcanizing Fluid, Flammable, 32 Oz. Can Cold Vulcanizing Fluid 1 Gallon 501-00204 QTY./ BOX 1 1 10 10 1 REMA TIRE TALC • Specially formulated for trouble-free tube installation, reduces folding and sticking which contributes to friction within the tire ASCOT NO. MFG. NO. DESCRIPTION 507-00063 63 Rema Tire Talc, 1 Lb. Shaker Top QTY./BOX 10 507-00063 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 393 SPECIAL CEMENT BL™ A&B COMPOUND REPAIR SYSTEM (FLAMMABLE) • The key to REMA TIP TOP’s exclusive Blue Bonding System, Special Cement BL creates a nearly indestructible bond between tire and repair unit • Specifically designed for the application of REMA TIP TOP Radial, Bias-Ply and Universal, Minicombi & RemaStem repair units • Use for chemical installation of REMA TIP TOP blue bonding layer repair units, Blue Floater Gum and chemical vulcanizing compounds • REMA TIP TOP’s newest Special Blue Cement (flammable) is free of CFC and aromatic compounds • REMA TIP TOP’s Vulc Compound has no equal when it comes to cold vulcanization injury filling • Equal quantities of A compound and compound, thoroughly mixed, produce a durable permanent repair 502-40541 502-51388 501-50300 CREATES ULTRA STRONG BOND ASCOT NO. MFG. NO. 502-40541 BL-8F 502-51388 BL-32F DESCRIPTION QTY./ BOX Special Blue Cement (flammable), 8 Oz. Brush Top Can Special Blue Cement (flammable), 32 Oz. Can 12 6 501-51300 RIM/BEAD SEALER AND INNERLINER REPAIR SEALANT • REMA TIP TOP offers two distinct Bead Sealer formulations designed to prevent leaks between the tire and rim • Designed to be applied to tire beads during the mounting process • Ideally suited for use with new or old tires • No drip formula is highly viscous with an extended shelf life • CFC-free formula requires shorter drying times • Properly applied, Repair Sealer creates an airtight seal around a finished repair, over buffed areas or porous tire innerliners • Prudent use of Repair Sealer maintains the integrity of the repair.vulcanizing uncured rubber • Flammable Version Available: F Series • No Drip Version available: ND Series ASCOT NO. MFG. NO. 501-50300 50F 501-51300 51F DESCRIPTION A+B VULC COMPOUND KIT: 650g can of A compound; 650g can of B compound; 1 can Special Cement BL (CFC Free), 225g A+B VULC COMPOUND KIT: 300g can of A compound; 300g can of B compound; 1 can Special Cement BL (CFC Free), 40g each 505-00176 504-09600 OTR-F CEMENT (FLAMMABLE) PREVENT LEAKS BETWEEN TIRE & RIM • Specifically designed for the chemical application of REMA TIP TOP Radial (RAD) and Bias Ply (PN) repair units • Optimizes the service performance of long haul earthmover and agricultural tires ASCOT NO. MFG. NO. 504-09600 960F 504-09601 505-00176 960ND 76F DESCRIPTION Rim & Bead Sealer w/Brush Cap. CFC-Free Formula (Flammable) 32 Oz. Rim & Bead Sealer w/Brush Cap. No Drip Formula - 32 Oz. Can Innerliner Sealer Can (Flammable) - 16 Oz. QTY./ BOX 6 6 6 ! CAUTION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION Use all tire repair chemicals in a well ventilated area. Avoid prolonged breathing or inhalation of vapors. ASCOT NO. MFG. NO. 500-00096 OTR-F DESCRIPTION OTR-F Cement (flammable) 500-00096 ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

394 TIRE REPAIR Cements, Sealants & Patches (cont.) REMABOND CEMENT (FLAMMABLE) • For Mold-Cure and Pre-Cure Retreading and Repairing • Specially formulated to be used in the application of Fill Rubber for buzz-outs, repair patch installation, and tire retreading operations MULTIPLE TEMPERATURE RUBBER (MTR) & BLACK CUSHION GUM REPAIR PRODUCT • REMA TIP TOP offers a v uncured rubber MTR produc excellent green tack and outs flow & vulcanization char ASCOT NO. MFG. NO. 526-51618 5161180 ASCOT NO. MFG. NO. 502-26005 502-26001 502-26015 502-26011 DESCRIPTION 16 RBB 5G Remabond Brush Cement (Flammable) - 5-Gallon 16 RBB D Remabond Brush Cement (Flammable) - 54-Gallon 16 RBS 5G Remabond Spray Cement (Flammable) - 5-Gallon 16 RBS D Remabond Spray Cement (Flammable) - 54-Gallon REMASOL RUBBER SOLVENT (FLAMMABLE) • Best for removing contaminants from rubber surfaces and for tire injury repair preparation • Totally compatible with both REMABOND Brush Cement and REMABOND Spray Cement • Fast drying • Contains no carcinogens • SHELF LIFE: 1 Year from Date of Manufacture in unopened original container ASCOT NO. MFG. NO. 506-26005 506-26015 DESCRIPTION 16 RS 5G Remasol Rubber Solvent (Flammable) - 5-Gallon 16 RS D Remasol Rubber Solvent (Flammable) - 54-Gallon 526-55610 526-55630 526-55672 5561 5563 DESCRIPTION MTR Cut Resistant Rope Rubber, OTR Repairs, 26.5 Lb. Pail MTR Cushion Gum, 24' x 10" x 0.050", 6 Lbs. MTR Cushion Gum, 2600mm x 30mm x 3mm, 2 Lbs. 5567-26.5 MTR Rope Rubber, OTR Repairs, 26.5 Lb. Pail REMA CUSHION GUMS • SHELF LIFE: 1 Year from Date of Manufacture (*except Butyl Repair Gum, SHELF LIFE: 6 Months from Date of Manufacture) 525-15213 SIZE (W X ASCOT NO. MFG. NO. 525-15116 15 1116 S 525-15216 525-15213 525-15413 525-15181 REMABOND REPAIR CEMENT (FLAMMABLE) • REMABOND Repair Cement is made in a convenient 1 gal. size ideal for repair stations ASCOT NO. MFG. NO. 500-01602 DESCRIPTION 525-15286 15 18116 BRG 16 RBR 1G REMABOND Repair Cement 525-15288 15 1818 FG 525-15418 525-15188 525-15186 525-15914 15 2116 S 15 2132 CG 15 4132 CG 15 18132 CG 15 418 CG 15 1818 CG DESC. Stripping Stock Stripping Stock Cushion Gum Cushion Gum Cushion Gum Cushion Gum Cushion Gum 15 18116 UG Universal Gum 15 914 UG Universal Gum Butyl Repair Gum* Floater Gum 18 x 1/8 455 x 3.00 RTT-B 10 THICKNESS) (INCH) SIZE (W X THICKNESS) (MM) 1 x 1/16 25 x 1.50 2 x 1/16 50 x 1.50 2 x 1/32 50 x 0.80 CURE RATE RTT-B RTT-B RTT-B 4 x 1/32 100 x 0.80 RTT-B 525-15116 WT./ BOX (LBS.) 35 35 35 35 18 x 1/32 455 x 0.80 RTT-B 10 4 x 1/8 100 x 3.00 RTT-B 35 18 x 1/8 455 x 3.00 RTT-B 20 18 x 1/16 455 x 1.50 RTT-B 10 9 x 1/4 230 x 6.00 RTT-B 40 18 x 1/16 455 x 1.50 RTT-C 10 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 395 REMA REPAIR CORD • SHELF LIFE: 1 Year from Date of Manufacture REMA PRECURE CUSHION GUM SIZE (W X ASCOT NO. MFG. NO. DESC. 526-15293 15 NY 29364 Nylon Tire Cord 526-15283 15 AR 28364 Aramid Tire Cord RTT-A 10' @ 280F 20' @ 260F RTT-B CURE RATES 20' @ 280F 35' @ 260F 20' @ 280F 40' @ 260F 30' @ 280F 50' @ 260F ASCOT NO. MFG. NO. 523-18160 523-18146 523-18206 REMA ROPE RUBBER • SHELF LIFE (18ER & 18ERS - EXTRUDER ROPE): 4 Months from Date of Manufacture, SHELF LIFE (18OR - OTR ROPE & 18TR - TREAD ROPE): 6 Months from Date of Manufacture 523-18712 523-18758 523-18860 523-18858 523-18960 523-18914 523-18912 523-18915 523-18856 523-18212 523-18512 526-18001 523-18101 18 10120 OTR PCC DP 523-18220 18 12120 OTR PCC DP 523-18412 18 14120 OTR PCC DP 526-18002 523-18161 ASCOT NO. 526-18001 526-18002 526-18003 MFG. NO. 18ER 18TR SIZE DESC. Extruder Rope Tread Rope (INCH) CURE RATE 3/8 Diameter RTT-A WT./BOX (LBS.) 30 18ERS Extruder Rope / Spool 3/8 Diameter RTT-A 30/Spool 3/8 Diameter RTT-B 30 18 16120 OTR PCC DP 523-18222 18 22120 OTR PCC DP 523-18262 18 26120 OTR PCC DP 525-15288 DESC. 18 100060 PCC 18 114060 PCC 523-18126 18 112060 PCC 18 200060 PCC 18 712060 PCC 18 758060 PCC 18 800060 PCC 18 858060 PCC 18 900060 PCC 18 914060 PCC 18 912060 PCC 18 914 045 PCC 18 858 046 PCC 523-18389 18 38916055 PCC 18 02120 OTR PCC DP 18 05120 OTR PCC DP Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum Precure Cushion Gum OTR Precure Cushion Gum Double Poly OTR Precure Cushion Gum Double Poly OTR Precure Cushion Gum Double Poly OTR Precure Cushion Gum Double Poly OTR Precure Cushion Gum Double Poly OTR Precure Cushion Gum Double Poly OTR Precure Cushion Gum Double Poly OTR Precure Cushion Gum Double Poly THICKNESS) (INCH) SIZE (W X THICKNESS) (MM) 29 x 3/64 735 x 1.20 28 x 3/64 710 x 1.20 RTT-C CURE RATE WT./ BOX (LBS.) RTT-D 20 lbs RTT-D 20 lbs RTT-D SIZE (W X THICKNESS) (INCH) (MM) 1 x 0.060 1-1/4 x 0.060 1-1/2 x 0.060 2 x 0.060 7-1/2 x 0.060 7-5/8 x 0.060 8 x 0.060 8-5/8 x 0.060 9 x 0.060 9-1/4 x 0.060 9-1/2 x 0.060 9-1/4 x 0.045 8-5/8 x 0.045 38-9/16 x 0.055 2 x 0.120 5 x 0.120 10 x 0.120 12 x 0.120 14 x 0.120 16 x 0.120 22 x 0.120 26 x 0.120 15 1818 FG Floater Gum 18 x 1/8 25 x 1.524 32 x 1.524 38 x 1.524 50 x 1.524 190 x 1.524 195 x 1.524 203 x 1.524 220 x 1.524 230 x 1.524 235 x 1.524 240 x 1.524 235 x 1.143 220 x 1.143 980 x 1.397 50 x 3.048 125 x 3.048 254 x 3.048 305 x 3.048 355 x 3.048 405 x 3.048 560 x 3.048 660 x 3.048 455 x 3.00 RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A 40 35 45 50 60 80 95 RTT-B 10 CURE RATE RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A RTT-A WT./BOX (LBS.) 40 50 35 35 30 30 35 35 35 40 40 35 30 52 40 • Undertread Bonding Gum • Can also be used on splices, skives, and exposed cord • Consistent Gauge • Excellent building tack and flow • Custom sizes available upon request (20 box minimum per size/gauge) • SHELF LIFE: 4 Months from Date of Manufacture WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

396 TIRE REPAIR Cements, Sealants & Patches (cont.) TIRE REPAIR CHEMICALS • Fast drying • Wide brush for easy application 504-90005 Black Bead Sealer, 5-Gallon ASCOT NO. MFG. NO. 501-90018 ASV8 501-90032 501-90008 501-90132 504-90011 504-90032 504-90005 504-90016 505-90032 ASV32 ASV8BL ASV32BL ABSG ABS32 ABS5G ARS16BK ABU32 DESCRIPTION Clear Chemical Vulcanizing Cement, 8 oz. (24 per case) Clear Chemical Vulcanizing Cement, Quart (6 per case) Blue Chemical Vulcanizing Cement, 8 oz. (24 per case) Blue Chemical Vulcanizing Cement, Quart (6 per case) Black Bead Sealer, Gallon (4 per case) Black Bead Sealer, Quart (6 per case) Black Bead Sealer, 5-Gallon Black Inner Liner Sealer, 16 oz. (12 per case) Inner Liner Cleaner, Quart (12 per case) 504-90011 Black Bead Sealer, Gallon 504-90032 Black Bead Sealer, Quart 501-90018 Clear Chemical Vulcanizing Cement, 8 oz. 501-90032 Clear Chemical Vulcanizing Cement, Quart 504-90016 501-90132 Blue Chemical Vulcanizing Cement, Quart Black Inner Liner Sealer, 16 oz. 501-90008 Blue Chemical Vulcanizing Cement, 8 oz. BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 397 LEAD WIRE PULL THROUGH PATCH/PLUG PATCH PLUGS • Quill and lead wire types • Repair using chemical vulcanizing cement • Easiest and most popular method to fill a nailhole and apply a patch in one simple step • Lead-wire guides the rubber stem through injury • Stem coated with self vulcanizing material and patch features Versacure bonding gum • For tread area of bias and radial passenger and truck tires 587-01309 QUILL & LEAD WIRE TYPES FOR TREAD AREA 587-01406 ASCOT NO. 587-01303 587-01306 587-01309 587-01406 587-01409 DESCRIPTION 1/8" Stem Lead Wire Pull Through Patch/Plug 1/4" Stem Lead Wire Pull Through Patch/Plug 3/8" Stem Lead Wire Pull Through Patch/Plug 1/4" Plug-N-Patch: Grey Cushion Gum, Blue Wrap 3/8" Plug-N-Patch: Grey Cushion Gum, Blue Wrap QTY./BOX 48 24 24 24 24 587-90003 587-90016 PUSH THROUGH PATCH/PLUG • One-piece molded rubber patch/plug unit with a metal quill that protects the stem from damage during insertion • For tread area of bias and radial passenger and truck tires 587-90066 FOR TREAD AREA PROTECTS STEM FROM DAMAGE ASCOT NO. MFG. NO. 587-90003 587-90016 AQ3 A3W 587-90018 587-90033 587-90066 587-01150 587-90088 ASCOT NO. MFG. NO. 587-01151 587-01152 587-01150 1/4" (6mm) Stem Push Through Patch/Plug 1/4" (6mm) Stem Push Through Patch/Plug 1/8" (3mm) Stem Push Through Patch/Plug QTY./BOX 24 48 48 587-90099 587-90110 A8D A9D A8W A6W A3D A6D DESCRIPTION Quill Type Combination Repair: 3/16" Wrapped Stem Lead Wire Combination Repair: 3mm Stem, 2" Cap Wrapped Stem Lead Wire Combination Repair: 6mm Stem, 2" Cap Lead Wire Dipped Stem Combination Repair: 2" Repair Size, 1/8" Dia. Stem, 1/8" Injury Lead Wire Dipped Stem Combination Repair: 2" Repair Size, 5/16" Dia. Stem, 1/4' Injury Lead Wire Dipped Stem Combination Repair: 2" Repair Size, 3/8" Dia. Stem, 5/16" Injury Lead Wire Dipped Stem Combination Repair: 2" Repair Size, 1/2" Dia. Stem, 3/8" Injury Wrapped Stem Lead Wire Combination Repair: 9mm Stem, 2" Cap QTY./ BOX 24 — — 24 24 24 24 — WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

398 TIRE REPAIR Cements, Sealants & Patches (cont.) STANDARD TUBE & TUBELESS TIRE REPAIRS • Feather edge, soft gum repairs • For use with all types of tubes • Repair using chemical vulcanizing cement UNIVERSAL/RADIAL BIAS REPAIRS • For use on private passenger and light truck tires up to 1/4" injuries • Rubber reinforced soft gum • Repair using chemical vulcanizing cement FOR UP TO 1/4" INJURIES 541-90000 541-90004 1-90005 541-90020 541-90017 541-90001 541-90011 541-90030 541-90040 ASCOT NO. MFG. NO. 541-90020 ARB20 541-90030 541-90040 ARB30 ARB40 541-90101 ARB100-1000 541-90255 ARB25-500 DESC. WIDTH 3-1/8" QTY./ BOX Large Round Medium Round Small Round Small Round Large Round 541-90610 ARB60-1000 Medium Round 20 2-1/8" 30 1-9/16" 40 1-9/16" 1000 3-1/8" 500 2-1/8" 1000 ASCOT NO. MFG. NO. 550-90000 550-90001 550-90002 550-90004 550-90005 550-90006 550-90007 550-90008 550-90009 550-90011 550-90012 550-90014 550-90015 550-90017 550-90018 550-90019 550-90031 550-90114 550-90200 AWR0 ASQ1 ASQ2 AWR4 AWR5 AWR6 AWR7 AWR8 AWR9 ASQ1T ASQ2T AWR4T AWR5T AWR7T AWR8T AWR9T ASQ3T AWR4-1000 AWR0T 550-90550 AWR5-500 550-91000 AWR0-1000 550-91100 550-92100 ASQ1-1000 ASQ2-1000 DESCRIPTION Small Round Small Square (Grey Gum/Red Plastic) Medium Square (Grey Gum/Red Plastic Medium Round Large Round Giant Round Small Square (Black Gum/Blue Plastic) Medium Square Large Square Small Square (Grey Gum/Red Plastic) Medium Square (Grey Gum/Red Plastic) Medium Round Large Round Small Square (Black Gum/Blue Plastic) Medium Square (Black Gum/Blue Plastic) Large Square (Black Gum/Blue Plastic) Large Square (Grey Gum/Red Plastic) Medium Round Small Round Large Round Small Round Small Square (Grey Gum/Red Plastic) Medium Square (Grey Gum/Red Plastic) WIDTH 1-9/16" 1-3/4" 2-1/8" 2-1/8" 3-1/8" 4-1/8" 1-3/4" 2-1/4" 2-3/4" 1-3/4" 2-1/8" 2-1/8" 3-1/8” 1-3/4" 2-1/4" 2-3/4" 2-1/4" 2-1/8" 1-9/16" 3-1/8" 1-9/16" 1-3/4" 2-1/8" QTY./BOX 35 40 40 30 18 10 35 25 15 100 80 100 50 100 50 50 50 1000 200 500 1000 1000 1000 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 399 EURO UNIVERSAL RADIAL REPAIR AGRICULTURAL BOOTS • For bias and radial repairs blue hard gum • Repair using chemical vulcanizing cement ASCOT NO. MFG. NO. 571-92100 DESCRIPTION ARR02-500 Rubber Reinforced: Round 2 1/4" SIZE QTY./BOX 500 • Designed for tube type repairs in agriculture and construction • Made with a blend of rubber and cord for strength with a nonchafing surface • Repair using chemical vulcanizing cement BIAS HEAVY DUTY UNITS • ASB series is a cord reinforced soft gum repair • ACB series is a cord reinforced repair with hard blue gum • Repair with chemical vulcanizing cement 564-90111 ASCOT NO. MFG. NO. 564-90012 564-90013 564-90014 564-90015 564-90016 564-90022 564-90111 ASB2 ASB3 ASB4 ASB5 ASB6 ACB2HD ACB1HD DESCRIPTION Bias Heavy Duty Bias Heavy Duty Bias Heavy Duty Bias Heavy Duty Bias Heavy Duty Bias Heavy Duty Bias Heavy Duty RADIAL HEAVY DUTY TRUCK UNITS • ACX series is a cord reinforced hard blue gum repair (For radial repairs only) • ASX series is a cord reinforced soft gum repair (For radial tires only) 576-90110 ASCOT NO. MFG. NO. 576-90010 576-90012 576-90014 576-90020 576-90040 576-90110 576-90111 576-90112 576-90114 576-90120 576-90140 576-90142 ACX10 ACX12 ACX14 ACX20 ACX40 ASX10 ASX10-300 ASX12 ASX14 ASX20 ASX40 ASX42 DESCRIPTION Radial Heavy Duty SIZE 2-1/8" x 3" Radial Heavy Duty 2-3/4" x 4-1/2" Radial Heavy Duty 3-3/8" x 5-1/8" Radial Heavy Duty 3-1/8" x 4-7/8" Radial Heavy Duty 3-7/8" x 7-5/8" 2-1/8" x 3" 2-1/8" x 3" QTY./BOX 20 10 10 10 10 Radial Heavy Duty Radial Heavy Duty Radial Heavy Duty 2-3/4" x 4-1/2" Radial Heavy Duty 3-3/8" x 5-1/8" Radial Heavy Duty 3-1/8" x 4-7/8" Radial Heavy Duty 3-7/8" x 7-5/8" Radial Heavy Duty 5-1/8" x 10-1/4" 20 300 10 10 10 10 5 ASCOT NO. MFG. NO. 571-90410 571-90705 VRI410 VRI705 DESCRIPTION 4" Orange, 12 Strand Tire Repair (10 Packets per Box) 7" Black, 5 Strand Tire Repair (10 Packets per Box) 576-90010 571-90410 SIZE 2-7/8" 4-5/8" 5-1/2" x 7-1/4" 7-1/8" 10" 2-7/8" 2-1/2" QTY./BOX 20 10 10 10 10 20 20 593-90011 ASCOT NO. MFG. NO. 593-90001 593-90002 593-90003 593-90004 593-90011 593-90022 A1L A2L A3L A4L A1R A2R DESCRIPTION Oval Agricultural Boot Oval Agricultural Boot Oval Agricultural Boot Oval Agricultural Boot Round Agricultural Boot Round Agricultural Boot STRAND TIRE REPAIR • Excellent emergency repair when a full service repair facility is unavailable • Pr using butyl rubber and 100% saturated cord • Excellent for golf carts, lawn 593-90001 SIZE 3" x 4" 4" x 6" 5-1/2" x 7-1/4" 7" x 9-3/4" 3-3/4" 4-1/2" QTY./ BOX 20 10 10 10 20 10 GREA EMERGENC REP WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

400 TIRE REPAIR Cements, Sealants & Patches (cont.) HEAVY DUTY 4" AUTOMOTIVE REPAIR INSERT KIT • For use on the wheel • Everything needed to make temporary, emergency repairs to most flat tires caused by nails or other objects up to 1/4" • 518-90130 KIT INCLUDES: (30) 4" temporary inserts, metal t-handle insertion tool, metal t-handle probe, lubricant, cutting blade, Allen wrench and instructions • 518-90160 KIT INCLUDES: (60) 4" temporary inserts, metal t-handle insertion tool, metal t-handle probe, lubricant, cutting blade, Allen wrench and instructions • Blow molded case for easy storage HEAVY DUTY 8" AUTOMOTIVE REPAIR INSERT KIT • For use on the wheel • Everything needed to make temporary, emergency repairs to most flat tires caused by nails or other objects up to 1/4" • KIT INCLUDES: (30) 8" temporary inserts, metal t-handle insertion tool, metal t-handle probe, lubricant, cutting blade, Allen wrench and instructions • Blow molded case for easy storage 518-90030 ASCOT NO. MFG. NO. 518-90030 DESCRIPTION ATS30K-HD Heavy Duty 8" Automotive Repair Insert Kit - 30 Repairs BROWN, 12 STRAND TIRE REPAIR INSERT W/ BLUE PAPER BACKING 518-90130 • 8" brown • Made in the USA • Extended shelf life • No leaks • 3rd party testing • EPA approved • Durable cord body • 100% butyl saturation • 6 repairs per packet • 5 packets per box FOR EASY, TEMPORARY REPAIRS 571-91964 518-90160 571-91968 ASCOT NO. MFG. NO. 518-90130 518-90160 DESCRIPTION ATR30K-HD Heavy Duty 4" Automotive Repair Insert Kit - 30 Repairs ATR60K-HD Heavy Duty 4" Automotive Repair Insert Kit - 60 Repairs ASCOT NO. MFG. NO. 571-91964 ATS1964 571-91968 ATS1968 DESCRIPTION 4” Brown, 12 Strand Tire Repair Insert w/ Blue Paper Backing 8” Brown, 12 Strand Tire Repair Insert w/ Blue Paper Backing ! BUYER'S GUIDE Ascot Supply Corp. does not recommend “temporary” tire repairs. All repairs should perform the function of filling or replacing the injured section as recommended by the RMA and other industry associations. ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 401401 SAFETY SEAL® AUTO/LIGHT TRUCK TIRE REPAIR REFILLS • 24 plies of a custom made high tensile (350 lb break strength) chemical resistant nylon yarn • Each yarn is immersed in proprietary rubber sealant system (250% rubber to yarn) • Patented manufacturing process assures the final Safety® Seal repair has an equal amount of rubber sealant (250% rubber to yarn) through-out the Safety Seal® Repair • INCLUDES: 60 4” (10cm) refill repairs per kit 585-60410 ASCOT NO. MFG. NO. DESCRIPTION 585-60410 SSRA Auto Light/Truck Tire Repair Refills - 60 4" (10 cm) Repairs ASCOT NO. MFG. NO. 571-22928 SAFETY SEAL® TRUCK TIRE REPAIR REFILLS • 24 plies of a custom made high tensile (350 lb break strength) chemical resistant nylon yarn • Each yarn is immersed in proprietary rubber sealant system (250% rubber to yarn) • Patented manufacturing process assures the final Safety Seal® has an equal amount of rubber sealant (250% rubber to yarn) through-out the Safety Seal® SAFETY SEAL® TIRE REPAIR KIT repair Repair • INCLUDES: 30 8" (20cm) refill repairs per kit ASCOT NO. MFG. NO. DESCRIPTION 585-30820 SSRT 585-30820 TRUCK • Includes everything to make temporary repairs to most flats caused by nails or other objects up to 1/4" • KIT INCLUDES: 30-8" (20cm) temporary repairs, Metal T-handle insertion tool, Metal T-handle spiral probe, Special lube, Extra insertion needle, Cutting blades, Allen wrench, and Instructions • Packed in a sturdy carrying case to fit easily under the seat of a truck 571-22926 Truck Tire Repair Refills - 30 8" (20 cm) Repairs VULCANIZED TUBELESS TIRE REPAIR SEALS • For emergency repair use only • String repairs are not designed to be used in lieu of a permanent repair • Repair a punctured tire in a matter of minutes • Made from highstrength yarn and butyl rubber 585-60541 ASCOT NO. MFG. NO. 538-60541 585-30581 585-10071 DESCRIPTION 1012O60T54TS 1012O30T58TS 105B100PD7AS ! SUPPLY CORPORATION 4" Orange String Repair 8" Orange String Repair 8" Thin Black String Repair QTY./BOX 60 30 100 ASCOT NO. MFG. NO. 571-22926 SSKTP SAFETY SEAL® TIRE REPAIR KIT 585-30581 DESCRIPTION Truck Tire Repair Kit DELUXE • For autos and light trucks • “On the Wheel” design for the professional who wants to fix a flat quickly and easily • Repairs punctures up to 1/4” and seals entire puncture from tread to inner liner • Also available in other sizes: truck, off-road and heavy equipment 571-22960 ASCOT NO. MFG. NO. 571-22960 SSKAP DESCRIPTION Deluxe Tire Repair Kit Ascot Supply Corp. does not recommend “temporary” tire repairs. All repairs should perform the function of filling or replacing the injured section as recommended by the RMA and other industry associations. DESCRIPTION SSKATVTI ATV “On The Wheel Truck Tire Repair Kit” The ATV “On The Wheel Tire Repair Kit” Gauge in use. ATV “ON THE WHEEL TIRE REPAIR KIT” • Designed for outdoor enthusiasts to repair, inflate and go! • KIT INCLUDES: (1) Needle insertion tool; (6) Self-vulcanizing repairs, (1) CO2 inflator w/ two cartridges; and Instructions • Packed in a water tight display tube package that hang on a peg hook • Can repair all tubeless tires with NO cement needed WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

402 TIRE REPAIR EURO-STYLE UNIVERSAL REPAIR UNITS Cements, Sealants & Patches (cont.) USA STYLE UNIVERSAL REPAIR UNITS • Rubber reinforced repairs that can be applied in any repairable area of a radial or bias-ply passenger tire • Repairs a maximum injury of 1/4" when following industry recommended repair procedures • Vulcanizes either chemically or with heat • For nail hole repairs in radial or bias-ply passenger tires • Chemical vulcanization only • Black vulcanizing gum, blue poly backing ASCOT NO. MFG. NO. 571-11307 571-11309 571-11311 571-11312 571-11313 11-307 11-309 11-311 11-312 11-313 DESCRIPTION Mini Square Small Square Medium Square Large Square SIZE (IN.) SIZE (MM) QTY./BOX 1-1/2 1-7/8 2-1/4 2-1/2 38 48 57 66 Small Rectangle 1-3/4 x 3 45 x 75 FEATHER-EDGE TUBE REPAIRS • Designed for repairing inner tubes (chemical vulcanization only) • Twice as strong as tube being repaired, yet, extremely flexible 50 50 50 50 10 ASCOT NO. MFG. NO. 571-11115 571-11116 571-11321 571-11322 571-11323 571-11324 571-11325 11-115 11-116 11-321 11-322 11-323 11-324 11-325 DESCRIPTION Small Square Medium Square Small Round Medium Round Large Round Small Oval Medium Oval SIZE (IN.) 1-7/8 2-1/8 1-5/8 2-1/4 3-1/4 SIZE (MM) 47 54 41 57 82 1-3/8 x 2-3/8 37 x 61 1-7/8 x 3-7/8 48 x 98 UNIVERSAL QUILLED COMBINATION UNITS • Feature rubber reinforced patch heads • Multi-directional and can be used in any repairable area of radial or bias-ply tires • Black repair unit with black vulcanizing gum • Both stem and repair unit will vulcanize chemically • Stem of combination unit is equipped with a metal quill 30 30 30 25 15 25 15 QTY./ BOX ASCOT NO. MFG. NO. 541-11000 541-11001 541-11002 541-11003 541-11004 541-11005 541-11006 541-11007 541-11008 11-000 11-001 11-002 11-003 11-004 11-005 11-006 11-007 11-008 DESCRIPTION Mini Round Small Round Medium Round Large Round Small Oval Medium Oval Large Oval Giant Round Giant Oval SIZE (IN.) 1-1/4 1-5/8 2-1/4 3-1/4 SIZE (MM) 32 43 57 82 1-3/8 x 2-3/8 35 x 60 1-3/4 x 3-3/4 45 x 97 2-1/2 x 5-5/8 65 x 144 125 5 3-3/4 x 6-1/8 95 x 155 QTY./ BOX 100 40 30 20 30 20 20 10 10 ASCOT NO. MFG. NO. 587-13381 13-381 587-13382 587-13386 587-33810 587-33811 13-382 13-386 13-381SQ 13-382SQ PATCH SIZE Round, 1-5/8" Round, 42mm Round, 2-1/8" Round, 55mm Square, 2-3/8" Square, 60mm Square, 1-5/8" Square, 42mm Square, 2-3/8" Square, 60mm STEM SIZE Round, 5/32" Round, 4mm Round, 5/16" Round, 8mm Flat, 7/16" Flat, 11mm Round, 5/32" Round, 4mm Round, 5/16" Round, 7.5mm QTY./BOX 20 15 10 20 15 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 403 DIPPED LEAD-WIRE INSERTS • Designed to fill the injury in passenger and truck, radial or bias-ply tires • Will vulcanize chemically or in the presence of a heat curing system, becoming a permanent part of the tire • Requires no special insert tool for installation 581-13621 581-13623 USA STYLE C-O-I RADIAL REPAIR • Designed for use in puncture, reinforcement or section repairs in any repairable area of passenger, truck, agricultural or earthmover radial tires • Repair is black with gray vulcanizing gum on a blue poly backing • Each reinforced ply is individually end-wrapped to deflect tire flexing stresses in a unique manner • New tie-gum construction eliminates the potential for delamination common in competitive brands • Will vulcanize chemically or in low temperature (precure) systems 581-13622 EACH UNIT IS ENDWRAPPED ASCOT NO. MFG. NO. 581-13620 581-13621 581-13622 581-13623 13-620 13-621 13-622 13-623 DESCRIPTION 1/4" Dipped Lead Wire Insert 3/16" Lead Wire Insert 3/8" Lead Wire Insert 13/32" Lead Wire Insert QTY./BOX 20 20 20 20 “BN” BIAS-PLY REPAIR • Designed to be applied in any repairable area of tube or tubeless bias-ply tire • Designed for use in puncture, reinforcing or section repairs • Will vulcanize chemically or in high heating curing systems • Repairs are a unit molded style with premium blue vulcanizing gum on white Mylar backing • Fine feather-edge eliminates chaffing ASCOT NO. MFG. NO. 571-11808 11-808 571-11810 571-11812 571-11814 571-11820 ASCOT NO. MFG. NO. 561-11488 561-11489 561-11490 561-11491 561-11492 561-11493 561-11494 561-11495 561-11496 561-11497 561-11498 561-11499 11-488 11-489 11-490 11-491 11-492 11-493 11-494 11-495 11-496 11-497 11-498 11-499 DESCRIPTION BN1, 1-Ply BN2, 2-Ply BN3, 2-Ply BN4, 2-Ply BN5, 2-Ply BN7, 3-Ply BN8, 3-Ply BN9, 4-Ply BN10, 6-Ply BN12, 6-Ply BN15, 8-Ply BN20, 8-Ply SIZE (IN.) SIZE (MM) 2-1/8" 3" 3-1/2" 4-1/4" 5-1/4" 6.5" 7-1/2" 8-5/8" 9-7/8" 12" 15" 20" 55 75 89 110 135 165 190 220 250 305 380 508 QTY./ BOX 30 20 20 10 10 10 10 10 5 5 3 3 571-11822 571-11824 571-11825 571-11835 571-11840 571-11842 571-11844 571-11845 11-810 11-812 11-814 11-820 11-822 11-824 11-825 11-835 11-840 11-842 11-844 11-845 DESC. Radial 10, 1-Ply Radial 10, 1-Ply Radial 12, 1-Ply Radial 14, 1-Ply Radial 20, 2-Ply Radial 22, 2-Ply Radial 24, 2-Ply Radial 25, 3-Ply Radial 35, 3-Ply Radial 40, 3-Ply Radial 42, 4-Ply Radial 44, 4-Ply Radial 45, 4-Ply 2-7/8" x 5" 3“x 6" 3" x 8-1/2" 72 x 125 75 x 150 75 x 215 4-1/2" x 5" 115 x 125 5-1/4" x 7" 133 x 180 4" x 7-3/8" 100 x 188 5" x 10" 5" x 13" 7-1/2" x 9-1/2" 125 x 254 125 x 330 190 x 240 10 10 10 10 10 10 10 10 5 2-1/4" x 4" 57 x 100 3-3/4" x 4" 95 x 100 10 10 SIZE (IN.) SIZE (MM) 1-5/8" x 3" 42 x 75 2-3/8" x 3" 60 x 75 QTY./BOX 20 20 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

404 TIRE REPAIR Cements, Sealants & Patches (cont.) DIPPED LEAD-WIRE COMBINATION UNITS • Requires no special wire pulling tools, just insert lead wire into the injury from the inside of the tire and pull the repair unit through from the outside • Stem and repair unit are gum-coated to provide the most complete bond, both inside the injury and on the innerliner • Will vulcanize chemically or in a heat cure system • Stem portion is dip coated, Patch has gray vulcanizing gum and blue poly backing BUFFING SOLUTION 505-14100 505-14102 TEM & AIR UNIT ARE GUMCOATED ASCOT NO. MFG. NO. 505-14100 505-14102 14-100 14-102 DESCRIPTION Buffing Solution Aerosol Buff TYPE Flammable Non-Flammable SIZE 32 oz. 16 oz. SEALERS 583-13673 504-14111 ASCOT NO. MFG. NO. 583-13670 583-13672 583-13673 583-13674 13-670 13-672 13-673 13-674 PATCH SIZE 1" (27mm) 1-5/8" (42mm) 2-1/8" (55mm) STEM DIAMETER 1/8" (3.8mm) 3/16" (5mm) 1/4" (6mm) 2-1/8" (55mm) 3/8" (8.5mm) QTY./BOX 20 24 24 24 ASCOT NO. MFG. NO. 504-14100 504-14104 504-14111 504-14228 14-101 14-104 14-101A 14-128A DESCRIPTION Bead Sealer Bead Sealer Bead Sealer - Heavy Duty Inner Liner Sealer CHEMICAL VULCANIZING CEMENT GRAY GUM LEAD-WIRE COMBINATION UNITS • Specially formulated gray gum coating over the stem • Offering both flammable and nonflammable cements • Flammable cements tend to dry faster • In certain regions, non-flammable cements required by law or regulation • Contains accelerators which, when coming into contact with the face gum on any “X-tra Seal™” repair unit, will begin the vulcanization process GRAY GUM COATING ASCOT NO. MFG. NO. PATCH SIZE 583-23672 583-23673 583-23674 583-23675 13-672G 13-673G 13-674G 13-675G STEM DIAMETER 1-5/8" (42mm) 3/16" (4.5mm) 2-1/8" (55mm) 2-1/8" (55mm) 2-1/8" (55mm) 1/4" (6mm) 5/16" (8mm) 3/8" (10mm) QTY./BOX 24 24 24 16 ASCOT NO. MFG. NO. 501-14008 501-14032 501-14511 501-14512 501-14513 501-14514 501-14515 14-008 14-032 14-511 14-512 14-513 14-514 14-515 DESCRIPTION Vulcanizing Cement Vulcanizing Cement HD Supr-Blu Cement HD Supr-Blu Cement Vulcanizing Cement Vulcanizing Cement Black Vulc. Cement TYPE Flammable Flammable Flammable Flammable Non-Flamm. Non-Flamm. Flammable SIZE 8 oz. 32 oz. 8 oz. 32 oz. 8 oz. 32 oz. 32 oz. 504-14228 TYPE Flammable SIZE 1 Gal. Flammable 5 Gal. Flammable Flammble 32 Oz. 16 Oz. 501-14008 501-14515 501-14511 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 405 Air Buffers & Drills HIGH-SPEED TIRE BUFFER WITH QUICK CHANGE CHUCK • Equipped with a quick change chuck to allow for rapid changes to a variety of tire repair tasks • APPLICATIONS: Ideal for scuffing, grinding, cleaning and many other uses requiring high speed and is equipped with safety throttle lever • Includes one quickchange adapter • FREE SPEED: 20,000 RPM • MADE IN USA QUICK CHANGE LOW-SPEED TIRE BUFFER WITH QUICK CHANGE CHUCK • FREE SPEED: 2,800 RPM • 90 PSI Required air pressure • 1/4"NPT. Air Inlet • 3/8" required hose size • WEIGHT: 2.25 lb. • 8.5" in length • Quick change chuck for fast change of buffing accessories 157-06010 ASCOT NO. MFG. NO. 157-06010 157-16010 DESCRIPTION SLP-6010 High-Speed Tire Buffer with Quick Change Chuck SLP-6010REK Above with Rear Exhaust Hose Kit LOW SPEED TIRE BUFFER WITH QUICK CHANGE SLIP CHUCK HIGH SPEED TIRE BUFFER KIT • Jacobs chuck for holding buffing accessories • Lock-off throttle • APPLICATIONS: Tire patchwork, roughing areas for recapping and cleaning tire moldings • FREE SPEED: 20,000 RPM • MADE IN USA MADE IN THE USA ASCOT NO. MFG. NO. 157-04038 157-14038 DESCRIPTION SLP-4038 SLP-4038REK 157-04038 High-Speed Tire Buffer with Jacob’s Chuck Above with Rear Exhaust Hose Kit ASCOT NO. MFG. NO. 158-10873 DESCRIPTION A873K Low Speed Tire Buffer with Quick Change Slip Chuck HEAVY DUTY SKIVING TOOL • APPLICATIONS: Excellent for skiving work due to the more substantial gear package which contributes to durability • FREE SPEED: 2,800 RPM • Rear exhaust performance • Equipped with safety throttle lever • Includes one quick-change adapter • MADE IN USA ASCOT NO. MFG. NO. 157-06550 157-16550 FOR SKIVING WORK HIGH SPEED BUFFER KIT WITH QUICK CHANGE CHUCK • Quick change chuck for holding MADE IN THE USA DESCRIPTION SLP-6550 Heavy Duty Skiving Tool 157-06550 SLP-6550REK Above with Rear Exhaust Hose Kit buffing accessories • Lock-off throttle • FREE SPEED: 22,000 RPM • APPLICATIONS: Tire patchwork, roughing areads for recapping and cleaning tire moldings • Includes overhose kit QUICK CHANGE CHUCK JACOBS CHUCK • Brass bushings provide performance and durability in tough working conditions • Includes whip hose and exhaust hose • Quick change slip chuck for fast and easy change of buffing wheel • Built-in regulator • Lock off throttle to prevent accidental start ups • Rear exhaust directs air away from the work area • APPLICATIONS: Ideal for patchwork, roughing areas for recapping and cleaning tire moldings • Overhose Kit also Available Separately (175-00873) QUICK CHANGE SLIP CHUCK ASCOT NO. MFG. NO. 157-06510 157-16510 DESCRIPTION SLP-6510 Low-speed tire buffer with quick change chuck SLP-6510REK Above with Rear Exhaust Hose Kit USA 157-06510 158-10873 ASCOT NO. MFG. NO. 158-11871 DESCRIPTION A871K-QC High Speed Buffer Kit with Quick Change Chuck 158-11871 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

406 TIRE REPAIR Air Buffers & Drills (cont.) HIGH SPEED TIRE BUFFER WITH OVERHOSE KIT • Jacobs chuck for holding buffing accessories • Lockoff throttle • FREE SPEED: 22,000 RPM • APPLICATIONS: Tire patchwork, roughing areas for recapping and cleaning tire moldings • Includes overhose kit ASCOT NO. MFG. NO. 158-10871 A871K DESCRIPTION High Speed Tire Buffer with Overhose Kit 158-10871 JACOBS CHUCK HIGH-SPEED TIRE BUFFER WITH JACOBS CHUCK • Provides plenty of power with it’s .5 horsepower motor and 22,000 RPM, rear exhaust performance • APPLICATIONS: Ideal for patchwork, roughing areas for recapping and cleaning tire moldings • Equipped with safety throttle lever JACOBS CHUCK LIGHTED LOW-SPEED BUFFER WITH QUICK-CHANGE CHUCK • Provides light inside the tire without the use of batteries or other external power sources • Volt-Aire patented technology turns the motor into a working generator to bring electricity and light to the work surface for enhanced visibility, safet productivity • Geared design provides high torque but low speed to prevent burning of work surface • Quick-change chuck allows operator to make rapid changes a variety of tool accessories • MADE IN USA ASCOT NO. MFG. NO. 157-06520 157-16520 DESCRIPTION SLP-6520L Lighted Low-Speed Tire Buffer with Quick Change Chuck SLP-6520REK Above with Rear Exhaust Hose Kit QUICK CHANGE ASCOT NO. MFG. NO. 158-00871 CP-871K DESCRIPTION High-Speed Tire Buffer with Jacobs Chuck - Includes Over Hose LOW SPEED TIRE BUFFER KIT 157-06520 • Quick change slip chuck for fast and easy change of buffing wheel • Adjustable speed regulator for precise control • Lockoff throttle to prevent accidental start ups • Rear exhaust directs air away from work area • FREE SPEED: 2,800 RPM QUICK CHANGE SLIP CHUCK 158-00873 HEAVY DUTY AIR LOW SPEED TIRE BUFFER • APPLICATIONS: For quick work of patchwork and roughing up low areas for recapping, tire scuffing and cleaning tire moldings • Free speed up to 3,000 RPM • 1/2 HP motor ASCOT NO. MFG. NO. 157-01327 DESCRIPTION IR-327LS Heavy Duty Air Low Speed Tire Buffer - Includes Over Hose 157-01327 ASCOT NO. MFG. NO. 158-00873 DESCRIPTION CP-873K Low Speed Tire Buffer Kit - Includes Over Hose BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 407 Tire Repair Tools & Accessories SLOTTED FINISHING RASPS CONTOUR CUP RASPS LARGE 539-02203 539-06310 LARGE VARIETY OF SHAPES & SIZES 539-02206 DURABLE & EFFICIENT 539-06411 DURABLE & EFFICIENT VARIETY OF SHAPES & SIZES 539-02207 539-02208 ASCOT NO. MFG. NO. 539-02203 539-02204 539-02205 539-02206 539-02207 539-02208 539-02209 539-02210 539-02241 2203 GRIT 36-Grit 2204 36-Grit 2205 2206 2207 2208 16-Grit 16-Grit 36-Grit 16-Grit 2209 36-Grit 2210 2241 16-Grit 36-Grit DESCRIPTION 2" x 3/16" Slotted Finishing Rasp 2" x 3/16" Slotted Finishing Rasp 2" x 3/8" Slotted Finishing Rasp 2" x 3/8" Slotted Finishing Rasp 2" x 1/2" Slotted Finishing Rasp 2" x 1/2" Slotted Finishing Rasp 2" x 3/4" Slotted Finishing Rasp 2" x 3/4" Slotted Finishing Rasp 2" x 1" Slotted Finishing Rasp ASCOT NO. MFG. NO. 539-06261 539-06260 539-06360 539-06361 539-06310 539-06311 539-06312 539-06313 539-06314 539-06315 539-06316 539-06317 539-06410 539-06411 539-06412 539-06413 539-06414 539-06415 539-06416 539-06417 TCW415 TCW415 TCW415 TCW415 TCW415 TCW415 TCW415 TCW415 TCW210 36-Grit TCW210 16-Grit TCW310 36-Grit TCW310 16-Grit TCW315 36-Grit TCW315 16-Grit TCW315 36-Grit TCW315 16-Grit TCW315 36-Grit TCW315 16-Grit TCW315 36-Grit TCW315 16-Grit 36-Grit 16-Grit 36-Grit 16-Grit 36-Grit 16-Grit 36-Grit 16-Grit 2"x 1-3/8" - 3/8" Arbor Hole 2"x 1-3/8" - 3/8" Arbor Hole 3" x 1" - 3/8" Arbor Hole 3" x 1" - 3/8" Arbor Hole 3" x 1-1/2" - 3/8" Arbor Hole 3" x 1-1/2" - 3/8" Arbor Hole 3" x 1-1/2" - 1/2" Arbor Hole 3" x 1-1/2" - 1/2" Arbor Hole 3" x 1-1/2" Vented - 3/8" Arbor Hole 3" x 1-1/2" Vented - 3/8" Arbor Hole 3" x 1-1/2" Vented - 1/2" Arbor Hole 3" x 1-1/2" Vented - 1/2" Arbor Hole 4" x 1-1/2"- 1/2" Arbor Hole 4" x 1-1/2" - 1/2" Arbor Hole 4" x 1-1/2" - 5/8" Arbor Hole 4" x 1-1/2" - 5/8" Arbor Hole 4" x 1-1/2" Vented - 1/2" Arbor Hole 4" x 1-1/2" Vented - 1/2" Arbor Hole 4" x 1-1/2" Vented - 5/8" Arbor Hole 4" x 1-1/2" Vented - 5/8" Arbor Hole GRIT DESCRIPTION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

408 TIRE REPAIR Tire Repair Tools & Accessories (cont.) B&J NON-REGRITTABLE COPPER CONTOUR WHEELS • The B&J Contour Wheels have a convex contour, which has proven to be particularly suitable for repairs inside the tire • Smaller models are almost completely covered with grit on their surface, so they can be used at any angle • Also ideal for sidewall machining • The variery of grain sizes available provides an optimum surface for every application B&J NON-REGRITTABLE COPPER BUFFOUT WHEELS • Buffout Tools are ideal for all types of tire repairs • With a variety of sizes and shapes repairs can be carried out quickly and effectively • Due to the narrow tool width of 3 mm and more, the area to be repaired remains as small as necessary and saves unnecessary filling material afterwards • The special design makes the tools durable and efficient 539-10136 539-11036 539-15616 539-15816 539-10936 539-10416 539-16316 ASCOT NO. MFG. NO. 539-10116 539-10123 539-10136 539-10160 539-11016 539-11023 539-11036 539-11060 539-10916 539-10923 539-10936 539-10960 539-10416 539-10423 539-10436 539-10460 GRIT 332001-16 332001-23 332001-36 332001-60 332010-16 332010-23 332010-36 332010-60 332009-16 332009-23 332009-36 332009-60 332004-16 332004-23 332004-36 332004-60 16 Grit 23 Grit 36 Grit 60 Grit 16 Grit 23 Grit 36 Grit 60 Grit 16 Grit 23 Grit 36 Grit 60 Grit 16 Grit 23 Grit 36 Grit 60 Grit DESCRIPTION 2" x 1" Copper Contour Wheel (50 x 25mm) AH 3/8" 2" x 1" Copper Contour Wheel (50 x 25mm) AH 3/8" 2" x 1" Copper Contour Wheel (50 x 25mm) AH 3/8" 2" x 1" Copper Contour Wheel (50 x 25mm) AH 3/8" 3" x 1" Copper Contour Wheel (76 x 25mm) AH 3/8" 3" x 1" Copper Contour Wheel (76 x 25mm) AH 3/8" 3" x 1" Copper Contour Wheel (76 x 25mm) AH 3/8" 3" x 1" Copper Contour Wheel (76 x 25mm) AH 3/8" 3" x 1.5" Copper Contour Wheel (76 x 38mm) AH 3/8" 3" x 1.5" Copper Contour Wheel (76 x 38mm) AH 3/8" 3" x 1.5" Copper Contour Wheel (76 x 38mm) AH 3/8" 3" x 1.5" Copper Contour Wheel (76 x 38mm) AH 3/8" 4" x 1.5" Copper Contour Wheel (102 x 38mm) AH 3/8" 4" x 1.5" Copper Contour Wheel (102 x 38mm) AH 3/8" 4" x 1.5" Copper Contour Wheel (102 x 38mm) AH 3/8" 4" x 1.5" Copper Contour Wheel (102 x 38mm) AH 3/8" ASCOT NO. 539-15616 539-15636 539-15816 539-15836 539-16316 539-16336 539-16416 539-16436 539-16516 539-16536 MFG. NO. 332056-16 332056-36 332058-16 332058-36 332063-16 332063-36 332064-16 332064-36 332065-16 332065-36 GRIT 16-Grit 36-Grit 16-Grit 36-Grit 16-Grit 36-Grit 16-Grit 36-Grit 16-Grit 36-Grit DESCRIPTION Flat Faced Buffout Wheel 2" x 3/16" (50 x 5mm) Flat Faced Buffout Wheel 2" x 3/16" (50 x 5mm) Flat Faced Buffout Wheel 2" x 1/4" (50 x 7mm) Flat Faced Buffout Wheel 2" x 1/4" (50 x 7mm) Flat Faced Buffout Wheel 2" x 3/8" (50 x 10mm) Flat Faced Buffout Wheel 2" x 3/8" (50 x 10mm) Round Faced Buffout Wheel 2" x 1/2" (50 x 13mm) Round Faced Buffout Wheel 2" x 1/2" (50 x 13mm) Round Faced Buffout Wheel 2" x 3/4" (50 x 19mm) Round Faced Buffout Wheel 2" x 3/4" (50 x 19mm) 539-16516 539-16416 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 409 B & J SUPER PATRIOT CONTOUR WHEEL B & J AIRBOT BUFFOUT WHEELS • The new AIRBOT® series not only look aggressive, they also work aggressively • With their open design and the angled setup they are much more efficient in getting the job done than any predecessors • Improved cooling • Rounder buffing profile • Longer lifetime • Faster grinding cycles • Super Patriot’s patented design is significantly efficient since cooling is achieved throughout the entire working surface of the tool due to the concave/ convex base design • Customers' feedback after using the Patriot carbides is based on the products significantly longer life vs. conventional carbides 539-28646 ASCOT NO. MFG. NO. 539-28646 DESCRIPTION 133286-460 3" X 1-1/4" CWSP 460 grit 3/8"AH 539-18516/36 539-18616/36 B & J HD BUFFOUT WHEELS 539-18716/36 539-18816/36 • Improved durability • Aggressive and efficient • Longer lifetime then conventional “16-grit” carbides 539-15516 539-33010 539-33009 539-18416 ASCOT NO. MFG. NO. 539-18516 DESCRIPTION 132185-16 RFBOT AIRBOT Ø2"x 3/16", AH 3/8", Grit 16 Buffout Wheel 539-18536 132185-36 RFBOT AIRBOT Ø2"x 3/16", AH 3/8", Grit 36 Buffout Wheel 539-18616 132186-16 RFBOT AIRBOT Ø2"x 1/4", AH 3/8", Grit 16 Buffout Wheel 539-18636 132186-36 RFBOT AIRBOT Ø2"x 1/4", AH 3/8", Grit 36 Buffout Wheel 539-18716 132188-16 RFBOT AIRBOT Ø2"x 1/2", AH 3/8", Grit 16 Buffout Wheel 132187-16 RFBOT AIRBOT Ø2"x 3/8", AH 3/8", Grit 16 Buffout Wheel 539-18736 132187-36 RFBOT AIRBOT Ø2"x 3/8", AH 3/8", Grit 36 Buffout Wheel 539-18816 539-18836 132188-36 RFBOT AIRBOT Ø2"x 1/2", AH 3/8", Grit 36 Buffout Wheel 539-18416 132184-16 RFBOT AIRBOT Ø4"x 1/2", AH 1/2", Grit 16 Buffout Wheel 539-18436 132184-36 RFBOT AIRBOT Ø4"x 1/2", AH 1/2", Grit 36 Buffout Wheel 539-15516 132155-16 RFBOT AIRBOT Ø6"x 1/2", AH 1/2", Grit 16 Buffout Wheel 539-15536 132155-36 RFBOT AIRBOT Ø6"x 1/2", AH 1/2", Grit 36 Buffout Wheel 539-33004 ASCOT NO. MFG. NO. 539-32056 539-32058 539-32063 539-32064 539-32065 539-33010 539-33009 539-33004 539-33017 332056-HD 332058-HD 332063-HD 332064-HD 332065-HD 332010-HD 332009-HD 332004-HD 332017-HD 539-33017 DESCRIPTION 2" x 3/16" RFBOT HD Buffout Wheel 2" x 1/4" RFBOT HD Buffout Wheel 2" x 3/8" RFBOT HD Buffout Wheel 2" x 1/2" RFBOT HD Buffout Wheel 2" x 3/4" RFBOT HD Buffout Wheel 3" x 1" Contour Wheel HD Grit 3/8" AH 3" x 1.5" Contour Wheel HD Grit 3/8" AH 4" x 1.5" Contour Wheel HD Grit 3/8" AH 4" x 1.5" Contour Wheel HD Grit 1/2" AH WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

410 TIRE REPAIR Tire Repair Tools & Accessories (cont.) TIRE REPAIR KNIVES • Rubber must be cleaned and hole injuries must be cleaned and roughened before inserting repair units 531-60570 HIGH CARBON STEEL 531-75190 FLEXIBLE FLEXIBLE TIRE REPAIR KNIFE • High carbon steel, round point skiver, glaze finish, round burnt finish handle (riveted) 531-75310 531-75150 ASCOT NO. MFG. NO. 531-60570 X751N 531-75190 537-75310 531-75200 531-75170 531-75330 531-75370 531-75440 X2T X3N X1S X2S X3S X4S X5S DESCRIPTION High carbon steel, hawk bill notch, glaze finish, round burnt finish handle (riveted) High carbon steel, taper point, glaze finish, round burnt finish handle (riveted) High carbon steel, round point, thin skiver, glaze finish, round burnt finish handle High carbon steel, square point, glaze finish, round burnt finish handle (riveted) 2-1/2" / 64mm 3" / 76mm 3-5/8" / 93mm 3-7/8" / 99mm 4-1/4" / 108mm 12 12 12 12 12 RUBBER KNIFE • High carbon steel, square point, glaze finish, round burnt finish handle (riveted) 531-71050 531-60150 ASCOT NO. MFG. NO. 531-70030 531-71050 70030 71050 ASCOT NO. MFG. NO. 531-60070 X4x1S 531-60090 531-60130 531-60150 531-60170 X5x1S X6x1S X8x11/8S X10x11/4S High carbon steel, square point, glaze finish, round burnt finish handle (riveted) DESCRIPTION BLADE LENGTH 4" x 1" / 102 x 26mm 5" x 1" / 127 x 26mm 6" x 1" / 152 x 26mm 8" x 1-1/8" / 203 x 29mm 10" x 1-1/4" / 254 x 32mm QTY./BOX 12 OTHER KNIVES ASCOT NO. MFG. NO. DESCRIPTION 531-60300 531-60310 531-75220 531-75310 60300 60310 75220 X3N 4" x 1" Curved Notch Repair Knife 6" x 1-1/2" 5-Notch Trim Knife 3/8" Curved Point Shoe Knife 4-7/8" Round Point Skiving Knife DESCRIPTION 4-1/2" Handle for X2 Blades 10 Replacement blades SKIVING KNIFE 531-70030 BLADE LENGTH 2" / 51mm 4" / 102mm 4-7/8" / 124mm QTY./ BOX 12 12 12 ASCOT NO. MFG. NO. 531-75150 X2RF DESCRIPTION High carbon steel, round point skiver, glaze finish, round burnt finish handle (riveted) BLADE LENGTH 4" / 102mm QTY./BOX 12 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 411 TIRE RELATED HAND TOOLS TIRE REPAIR AIR TOOL ACCESSORIES 173-09400 537-00045 173-09150 537-06012 173-09165 173-09202 537-06010 173-09211 537-06014 173-09212 173-09213 537-06022 173-09215 ASCOT NO. MFG. NO. 537-00045 537-06010 537-06012 537-06014 537-06022 45 6010 6012 6014 6022 DESCRIPTION Retreaders Brush Geared Side Cutter for Steel Cords 8" Steel Nippers Brass Brush for Cleaning Repair 9" Whetstone PROFESSIONAL HEAVY DUTY TIRE REAMERS 537-17277 ASCOT NO. MFG. NO. 537-17276 537-17277 1-R 2-R DESCRIPTION 3/16” Diameter - Blade Length - 6-3/4” 1/4” Diameter - Blade Length - 8-3/4” ASCOT NO. MFG. NO. 173-00018 173-00019 173-00020 173-00022 173-00023 173-09150 173-09165 173-09166 173-09167 173-09201 173-09202 173-09211 173-09212 173-09213 173-09214 173-09215 173-09216 173-09400 QC18 QC19 QC20 QC22 QC23 SLP-9211 DESCRIPTION Quick Chuck Adapter W/ Collar Quick Chuck Adapter W/ Spacer 1" x 3/8" Thread Quick Chuck Adapter For 1/8" Shank Quick Chuck Adapter For 1/4" Shank Quick Chuck Adapter For 5/16" Shank SLP-9150 Jacobs 3/8" Precision Chuck and Key SLP-9165 Quick Change Chuck - 3/8"-24 Mounting Thread SLP-9166 Quick Change Chuck - 1/2"-13 Mounting Thread SLP-9167 Quick Change Chuck - 1/2"-20 Mounting Thread 1-11/16" x 3/8"-24 Chuck Adapter w/Washer & Nut SLP-9201 SLP-9202 2-3/4" x 3/8"-24 Chuck Adapter w/Nut & Wheel Spacer 1-7/8" x 3/8"-24 Threaded Adapter w/Washer & Nut SLP-9212 2-1/4" x 3/8"-24 Threaded w/ Nut & Wheel Spacer 1-15/16" Adapter w/Set Screw for 1/8" Shank SLP-9213 SLP-9214 1-15/16" Adapter w/Set Screw for 3/16" Shank SLP-9215 1-15/16" Adapter w/Set Screw for 1/4" Shank SLP-9216 1-15/16" Adapter w/Set Screw for 5/16" Shank SLP-9400 Overhose Kit 173-09216 WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

412 TIRE REPAIR Tire Repair Tools & Accessories (cont.) ASCOT NO. MFG. NO. INSERTION TOOLS DESCRIPTION 537-90116 537-90144 537-91119 537-10010 537-10012 537-10017 537-10021 537-90135 537-90155 537-10011 537-10013 TST TTT APRBR SSTA SSTT SSPS SSPT AWRN35 AWRN55 SSNA SSNT Metal T-Handle Automotive/ Light Truck Insertion Tool Metal T-Handle Truck Insertion Tool Metal T-Handle Spiral Probe for Automotive/Light Truck Metal T-Handle Insertion Tool for Auto/Light Truck: 6" Metal T-Handle Insertion Tool for Truck: 8" Metal T-Handle Probe Spiral for Auto/Light Truck: 6" Metal T-Handle Probe Spiral for Truck: 8" Replacement Needle: 3-1/2" Replacement Needle: 5-1/2" Replacement Needle for Auto/ Light Truck Insertion Tool: 5" Replacement Needle for Truck Insertion Tool: 6-3/4" HANDLE Metal Metal Metal Metal Metal Metal Metal - - - - 537-90201 537-90035 537-90045 537-90119 PPG WRN35 WRN45 PRBR Plastic Pistol Grip Handle Barbed Rasp Replacement Needle: 3-1/2" Replacement Needle: 4-1/2" Replacement Spiral Probe Plastic - - - ASCOT NO. MFG. NO. 537-90006 537-90019 537-90200 537-90002 537-90003 537-90005 537-90009 537-90150 TST TSPRB TSBRP SEPG OETT OE11 SPPG P150 DESCRIPTION Chrome Plated T-Handle with 3" Replaceable Needle Chrome Plated T-Handle Spiral Probe Chrome Plated T-Handle with Barbed Rasp Plastic Pistol Grip Handle - Short Plastic T-Handle Heavy Duty Screwdriver-Type Handle: 11" Plastic Pistol Grip Handle Spiral Probe Heavy Duty Screwdriver-Type Handle Barbed Rasp HANDLE Chrome Chrome Chrome Plastic Plastic Plastic Plastic Plastic BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS 537-90116 537-91119 537-90144 537-90005 537-10010 537-90150 537-90003 537-10017 537-90002 537-90201 537-10021 537-10011 537-90035 537-90045 537-90009

TIRE REPAIR 413 MISC. INSERTION TOOLS, RASPS & NEEDLES ASCOT NO. MFG. NO. DESCRIPTION 537-00027 537-00028 537-00575 537-00585 537-02240 537-02241 537-10565 537-36560 537-95893 537-15224 537-15225 537-15226 537-15227 537-15230 537-15232 27 28 575 585 6003 6003T 565 190 199 14-925 14-204 14-213 14-216 14-317 14-204 Replacement Blades for Rubber Scraper Rubber Scraper Truck Repair Insertion Tool EM Repair Insertion Tool Radial Tire Repair Specialist Rasp - 1/4” Radial Tire Repair Specialist Rasp for Truck Tires Car Repair Insertion Tool Awl/Probe Probe Buffer/Stickleback Rasp Super-Grip Open-Eye Needle Super-Grip Tire Probe Super-Grip Closed-Eye Needle Super-Grip Spilt-Eye Needle Heavy Duty Metal Split-Eye Needle Super-Grip Heavy Duty Tire Probe WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS 537-00028 537-02241 537-00575 537-00027 537-00585 537-10565 537-95893 537-02240 537-36560 537-15224 537-15226 537-15227 537-15230 537-15232

414 TIRE REPAIR Tire Repair Tools & Accessories (cont.) ® FLARED CONTOUR WHEELS ® The unique profile of the Flared Contour Wheels properly matches the shape of the tire. Rubberhog® Tire Repair Tools Rubberhog features innovations from the leader in the industry. The Rubberhog Original SSG coating uses the best technology to ensure peace of mind. • Buffs cooler, no scorching • Fantastic wear life; costing you less per repair • Better surface texture for a safer bond • Faster material removal, for a quicker repair Uniform Height & Shape Open Tooth Structure Hundreds of Carbide Teeth 538-10700 • Provides wide, level contact with surface • Efficient use of the entire tool • Easier to use - less operator fatigue • Reduced buffing time 538-11200 SMOOTH OPERATION 538-12200 REDUCED BUFFING TIME Detailed Illustration of Rubberhog SSG® Teeth LOW-PROFILE PATCH PREP WHEEL • Unique design allows buffing in low profile tires without risking sidewall damage • Solid steel construction makes this the smoothest running product available SOLID STEEL DESIGN 538-14000 ASCOT NO. MFG. NO. 538-14000 140 DESCRIPTION 1-1/4" Dia., 3/8"-24 Thread, Fine (SSG 170) ASCOT NO. MFG. NO. 538-10000 538-10200 538-13017 538-13023 538-10700 538-10900 538-11100 538-11200 538-11400 538-11600 538-11800 538-12000 538-12200 RH100 RH102 RH107 RH109 RH111 RH112 RH114 RH116 RH118 RH120 RH122 DESCRIPTION 1-3/4" Dia., 3/8" Bore, Fine (SSG 170) 1-3/4" Dia., 3/8" Bore, Medium (SSG 230) RH130-170 2" Dia., 3/8" Bore, Fine (SSG 170) RH130-230 2" Dia., 3/8" Bore, Medium (SSG 230) 2-1/2" Dia., 3/8" Bore, Fine (SSG 170) 2-1/2" Dia., 3/8" Bore, Medium (SSG 230) 2-1/2" Dia., 3/8" Bore, Coarse (SSG 390) 3" Dia., 3/8" Bore, Fine (SSG 170) 3" Dia., 3/8" Bore, Medium (SSG 230) 3" Dia., 3/8" Bore, Coarse (SSG 390) 3-1/2" Dia., 3/8" Bore, SSG Fine (SSG 170) 3-1/2" Dia., 3/8" Bore, Medium (SSG 230) 3-1/2" Dia., 3/8" Bore, Coarse (SSG 390) BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 415 ® POLYPLUGS FOR FLARED CONTOUR WHEELS • Easily fits inside the contour wheel • Compensates for mounting inaccuracies • Reduces vibration for smoother, quieter, more comfortable operation • Reusable! • Protects from wheel damage ASCOT NO. MFG. NO. 538-15000 538-15100 538-15200 538-15400 538-15600 RH150 RH151 RH152 RH154 RH156 DESCRIPTION 1-3/4" PolyPlug 2" PolyPlug 2-1/2" PolyPlug 3" PolyPlug 3-1/2" PolyPlug 1/4” & 1/8” SHAFT TAPERS • Excellent for high-tread skiving ECONOMY FLARED CONTOUR WHEEL • Proven Rubberhog shape • Uses the Standard Grit coating for an economical solution • Reduced aggressiveness for the less experienced user • Much safer than black stones! ASCOT NO. MFG. NO. 538-13000 RH130 DESCRIPTION 2" Contour Wheel, 3/8" Bore, 60 Grit 538-13000 1/8” SHAFT REPAIR KIT • Perfect for very small repairs BUZZOUT WHEELS • Free cutting and long lasting • Fully-rounded profile • Excellent for bias tires • Use for skiving on hightread radial tires; not recommended for contact with steel cord 538-30400 ASCOT NO. MFG. NO. 538-30000 538-30200 538-30400 538-30600 538-30500 538-31000 538-31200 538-31400 RH300 RH302 RH304 RH306 RH308 RH310 RH312 RH314 DESCRIPTION 2" x 1/4" W, Medium (SSG 230) 2" x 1/4" W, Coarse (SSG 390) 2" x 3/8" W, Medium (SSG 230) 2" x 3/8" W, Coarse (SSG 390) 2" x 1/2" W, Medium (SSG 230) 2" x 1/2" W, Coarse (SSG 390) 2" x 3/4" W, Medium (SSG 230) 2" x 3/4" W, Coarse (SSG 390) ASCOT NO. MFG. NO. 538-61100 538-61300 538-00018 RH611 RH613 T-18-E DESCRIPTION 5/8" Taper, 1/4" Shaft, Coarse (SSG 330) 7/8" Taper, 1/4" Shaft, Coarse (SSG 330) 1/8" Taper, 1/8" Shaft, Fine (SSG 170) 538-61100 REUSABLE! 1/4" SHAFT SPHERES • Larger Spheres are excellent for high-tread skiving • Smaller Spheres chamfer around injuries on liner; don’t take a chance on entrapped air! 538-60100 ASCOT NO. MFG. NO. 538-60100 538-60300 538-60500 RH601 RH603 RH605 DESCRIPTION 5/8" Sphere, 1/4" Shaft, Coarse (SSG 330) 7/8" Sphere, 1/4" Shaft, Coarse (SSG 330) 1-1/8" Sphere, 1/4" Shaft, Coarse (SSG 330) ASCOT NO. MFG. NO. 538-63500 RH635 DESCRIPTION 1/8" Shaft Tool Kit, Fine (SSG 170) WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

416 TIRE REPAIR ® Tire Repair Tools & Accessories (cont.) 1/4” & 1/8” SHAFT ROTOR SAWS • Excellent for high-tread skiving FOR HIGHTREAD SKIVING 538-61900 ASCOT NO. MFG. NO. 538-61900 538-00340 RH619 RS-34-E DESCRIPTION 1-3/8" Rotor Saw, 1/4" Shaft, Coarse (SSG 330) 3/4" Rotor Saw, 1/8" Shaft, Fine (SSG 170) Sidewall Disc. NAIL HOLE REAMERS • For bias tires FOR BIAS TIRES 538-62600 ROTARY KNIFE BLADES ASCOT NO. MFG. NO. 538-62600 RH626 DESCRIPTION 1/4" x 3" NHR, 1/4" Shaft, Coarse (SSG 330) • Cuts and textures ends of pre-cured tread • Fits popular tread builders • Long-Lasting! FOR PRE-CURED TREAD RETREADING SIDEWALL WHEELS • Designed for shoulder and sidewall preparation • Used on manual or automatic sidewall buffers • Fast and effective removal of oxidized rubber • Used with or without traditional wire brushes • Excellent durability, reducing your cost per buff • Provides a uniform texture maximizing rubber-to-rubber bond 538-10134 FOR SHOULDER & SIDEWALL 538-10013 ASCOT NO. MFG. NO. 538-41239 538-41223 538-42239 538-42223 DESCRIPTION DW412O390 DW412O230 SD412O390 SD412O230 4-1/2" Dish Wheel, 7/8" Bore, Coarse (SSG 390) 4-1/2" Dish Wheel, 7/8" Bore, Medium (SSG 230) 4-1/2" Disc, 7/8" Bore, Coarse (SSG 390) 4-1/2" Disc, 7/8" Bore, Medium (SSG 230) Dish Wheel DISC/DISH SIDEWALL WHEELS • For angle head machines; section repair & cosmetics DISC VS. DISH SHAPE The Disc shape is just slightly curved while the Dish is much more rounded. The selection of shape is based on operator preference, and the job being done. Both wheels are excellent for exterior repair work, while the Dish Wheel can also be used inside of very large tires. FAST AND EFFECTIVE 538-10135 538-10020 538-70800 ASCOT NO. MFG. NO. 538-12900 RH129 538-70750 538-70800 538-70850 RH707-50 RH708 RH708-50 DESCRIPTION 4" Buffing Cup, 3/4" Arbor Hole, Coarse (SSG 390) *Bandag pre-8400 series 6" x 50mm Donut Wheel, Very Coarse (SSG 460) 6" x 1" x 1-1/2" Donut Wheel, Coarse (SSG 390) 6" x 50mm Donut Wheel, Coarse (SSG 390) ASCOT NO. MFG. NO. 538-10134 538-10135 538-10013 538-10014 538-10020 538-10021 DESCRIPTION RH100-GEG-134 RH100-GEG-134-80 RH100-GEG-138 RH100-GEG-138-80 RH100-GEG-200 RH100-GEG-200-80 6" x 1-3/4", 150 Grit *Salisbury + Oliver 6" x 1-3/4", 80 Grit *Salisbury + Oliver 6" x 1-3/8", 150 Grit *Cahill 6" x 1-3/8", 80 Grit *Cahill 6" x 2", 150 Grit *Bandag 5110, All Matuzzi 6" x 2", 80 Grit *Bandag 5110, All Matuzzi BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 417 CONTOUR WHEELS 2" + 2.5" CONTOUR WHEELS 3" + 3.5" B&J HORNET CARBIDES THE NEXT GENERATION OF CARBIDE TECHNOLOGY B&J Hornet Carbides feature longlasting cutting teeth arranged into a unique open pattern providing a uniform surface texture for a safer bond. B&J Hornet Carbides are available in many shapes, sizes and textures. GRIT CROSSREFERENCE R=RED O=ORANGE Y=YELLOW G=GREEN B=BLUE P=PURPLE GRIT SIZE 50 70 90 100 125 132 UNIT WHEELS 3" + 4" FINE UNIT WHEELS EUROPE 3" + 4" SUPER COARSE GRIT CHART KEY 50 100 70 90 SMALL + MEDIUM CONES 5/8" + 7/8" 125 132 ROUND BALLS 1" + 1.25" B&J HORNET CARBIDES APPLICATION GUIDE ROUND FACED BUFFOUT WHEELS 2" WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION PENCIL RASP 0.25" x 2" ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS The new B&J

418 TIRE REPAIR Tire Repair Tools & Accessories (cont.) DUALIFE® KNOT TYPE WIRE WHEEL BRUSHES-STANDARD TWIST ASCOT NO. MFG. NO. DIA. 535-08014 08014 3" 535-08034 08034 4" 535-08044 08044 4" 535-08075 08075 6" 535-08085 08085 6" .014" POWER BRUSHES WIRE SIZE RPM ARBOR HOLE 25,000 1/2"-3/8" .0118" 20,000 1/2"-3/8" .014" 20,000 1/2"-3/8" .0118" 9,000 5/8"-1/2" 9,000 5/8"-1/2" .014" 535-08014 535-13533 COPPER CENTER® ASCOT NO. 535-15322 535-15443 535-15463 535-15533 535-15543 535-15563 MFG. NO. DIA. WIRE WHEEL BRUSHES (WIRE FILL) WIRE SIZE RPM 15322 1-1/2" .0104" 20,000 ARBOR HOLE 3/8" 15443 2" .008" 20,000 1/2" 15463 2" .0118" 20,000 1/2"-3/8" 15533 3" .006" 20,000 1/2"-3/8" 15543 3" .008" 20,000 1/2"-3/8" 3" .0118" 20,000 1/2"-3/8" 15563 535-21072 POLYFLEX® ENCAPSULATED WHEELS-BURGUNDY ELASTOMER (STANDARD) ASCOT NO. MFG. NO. 535-35070 35070 535-35240 35240 535-35250 DIA. 2" 2" WIRE SIZE RPM ARBOR HOLE .014" 20,000 1/2" .0104" 20,000 1/2" 35250 3" .0118" 20,000 1/2" 535-35240 ASCOT NO. MFG. NO. DESCRIPTION 535-21072 535-21073 535-21074 535-21076 21072 21073 21074 21076 1/4" Diameter, Wire Size: .004", OAL 3-1/2" 3/8" Dia, .004", OAL 3-1/2" 1/2" Diameter, Wire Size: .005", OAL 3-1/2" 3/4" Diameter, Wire Size: .006", OAL 3-1/2" POWER & HAND TUBE BR 535-15443 ASCOT NO. MFG. NO. DESCRIPTION 535-13533 535-70179 13533 70179 Standard Twist Tire Wheel 3" Brush KNOTTED END AND POWER BRUSHES • Features a hollow end and heavy duty brushing action with some flexibility • Ideal for more demanding cleaning applications in recessed areas 535-14174 ASCOT NO. MFG. NO. 535-14174 535-14177 535-14178 535-14185 14174 14177 14178 14185 STYLE Single Row Knotted Wire Cup Brush Single Row Knotted Wire Cup Brush Knotted End Brush Knotted End Brush SIZE 3-1/2" 3-1/2" 1-1/8" 1-1/8" ARBOR 5/8"-11NC 3/8"-24UNF 1/4" Shank 1/4" Shank 535-14177 FILL WIRE Steel Steel Steel Steel 535-14178 WIRE DIA. TRIM LENGTH 7/8" 0.023" 0.023" 0.014" 0.020" 7/8" 1-1/8" 7/8" RPM 13,000 13,000 20,000 22,000 HEAVY DUTY BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 419 3" - 10" POWER BRUSHES • Provide heavy duty brushing action with some flexibility • Ideal for demanding cleaning applications on somewhat irregular surfaces 535-14165 535-14170 535-14171 535-14172 535-14173 535-14175 ASCOT NO. MFG. NO. 535-14165 535-14170 535-14171 535-14172 535-14173 535-14175 535-14176 535-14179 535-14182 14165 14170 14171 14172 14173 14175 14176 14179 17682 STYLE Twist Knot Mounted Knot Twist Knot Twist Knot Twist Knot Twist Knot Cable Twist Knot Cable Twist Knot Mounted Knot SIZE 3" 3-1/4" 4" 4" 4" 4" 4" 10" 3-1/4" WIDTH/FACE 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/4" 1-3/4" 3/8" 535-14176 ARBOR 1/2"-3/8" 1/4" Shank 1/2"-3/8" 1/2"-3/8" 5/8"-11 1/2"-3/8" 1/2"-3/8" 2" 1/4" Shank FILL WIRE Steel Steel Steel Steel Steel Steel Steel Steel Steel 535-14179 WIRE DIA. 0.014" 0.014" 0.0118" 0.014" 0.020" 0.020" 0.020" 0.023" 0.020" TRIM LENGTH 5/8" 5/8" 7/8" 7/8" 7/8" 7/8" 7/8" 1-3/4" 5/8" 535-14182 RPM 25,000 25,000 25,000 25,000 25,000 25,000 25,000 4,500 25,000 RPG AIR POWERED TIRE REPAIR V • Quick change from blow to vacuum function • KIT INCLUDES: Plastic body gun, dust bag, 2 extension tubes, shop brush, flat tube, tiny tube ASCOT NO. MFG. NO. DESCRIPTION 537-00003 VBG2 RPG Air Powered Tire R WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

420 TIRE REPAIR Tire Repair Tools & Accessories (cont.) CARBIDE CUTTING TOOLS BUFFING STONES FOR STEELBELTED TIRES 533-00010 533-00045 533-00003 533-00012 533-01120 533-01140 534-80001 534-80015 534-80036 534-80037 534-80115 534-80136 534-80137 533-01180 533-01381 533-01141 533-01181 533-01516 533-01716 ASCOT NO. MFG. NO. 533-00003 533-00010 533-00012 533-00045 533-01120 533-01140 533-01141 533-01180 533-01181 533-01182 533-01381 533-01516 533-01716 533-01732 CB3 CB10 CB12 CB4.5 BU12B BU14R BU14TR BU18R BU18T BU18TL BU38T BU516NR BU716N BU732N DESCRIPTION 1/8" (3mm) Pointed End 3/8"(10mm) Pointed End 1/2" (12mm) Pointed End 1/8" (4.5mm) Pointed End 1/2" Ball Burr 1/4" Router Burr 1/4" Long Taper Burr 1/8" Router Burr 1/8" Taper Burr 1/8" Taper Burr, 3" Overall Length 3/8" Tree Burr 5/16" Long Taper Burr 7/16" Long Taper Burr 7/32" Long Taper Burr BUFFING WHEEL • For use on tires or tubes • Coarse grit, round nose • Tungsten carbide ASCOT NO. MFG. NO. DESCRIPTION 539-10001 BC-1 ASCOT NO. MFG. NO. 534-80001 534-80005 534-80011 534-80015 534-80024 534-80036 534-80037 534-80115 534-80136 534-80137 534-81115 A-1 A-5 A-1B A-15 A-24 A-36 A-37 A-15B A-36B A-37B A-15SS Large Cone 3/4" Stone Diameter (Brown) Pencil Point - 1/4" Stone Diameter Round Head Pencil - 1/4" Stone Diameter Stone Disc - 1-3/4" Diameter Stone Disc - 1-1/4" Stone Diameter Pencil Point - 1/4" Stone Diameter-Brown Stone Disc - 1-3/4" Diameter -Brown Stone Disc - 1-1/4" Diameter-Brown Pencil Point 1/4" Stone Diameter, Stainless Steel Shank DESCRIPTION Large Cone - 3/4" Stone Diameter Small Cone - 3/4" Stone Diameter Buffing Wheel, 2-1/2" diameter 539-10001 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 421 CHANNELLOCK PLIERS • 100% MADE IN USA • LASER heat-treated cutting edges perform better and last longer • FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention • CHANNELLOCK BLUE® grips for comfort STITCHERS • Corrugated ball bearing stitcher with hardened steel wheel and varnished wooden handle 536-00001 ASCOT NO. MFG. NO. 536-00001 536-01121 536-01122 536-02040 536-02890 536-02910 536-06500 CS-1 VT-1121A VT-1121B DESCRIPTION 1-1/2" x 1/16" Corrugated Stitcher 1.5" x 1/16" Economy Ball-Bearing Stitcher 1.5" x 1/8" Economy Ball-Bearing Stitcher MRO2040 2" x 2" Flat Roller MRO2890 2" x 1/16" Corrugated Stitcher 2" x 1/4" Corrugated Stitcher MRO2910 MRO6500 2" x 2" Porcupine Roller GOOSENECK STITCHER • Ideal repair tool for trucks, cars and motorcycles • Durable and ergonomic handle to reduce user fatigue 536-00101 ASCOT NO. MFG. NO. 319-00337 319-00357 319-00358 319-00436 319-00526 337 357 358 436 526 DESCRIPTION 7" High Leverage Diagonal Cutting Plier 7" End Cutting Plier 8" End Cutting Plier 6" Diagonal Cutting Plier, Box Joint 6" Slip Joint Plier, Wire Cutting Shear ASCOT NO. MFG. NO. 536-00101 NS-TS01 DESCRIPTION 1.5" x 1/8" Gooseneck Stitcher WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS 319-00337 319-00358 319-00357 319-00436 319-00526

422 TIRE REPAIR Tire Repair Tools & Accessories (cont.) TUBELESS TIRE INSERT KIT • For use on the wheel • Designed for emergency repairs • Fast and easy application • Made in the USA by Western States/Elgi INNERLINER SCRAPER • This tool is a must for professional tire repairs • Eliminates power buffing on many tire repairs • Scraper removes material that might contaminate buffing wheels, ensuring a better repair every time FOR EMERGENCY REPAIRS FAST AND EASY TO APPLY FOR PRO TIRE REPAIRS PARTS INCLUDED PARTS INCLUDED 1 HD chrome T-Handle slot eye inserter w/ replaceable needle 1 HD chrome T-Handle spiral probe w/ replaceable probe 60 brown string inserts 1 plug lubricant 1 razor knife S-4 ASCOT NO. MFG. NO. DESCRIPTION 537-00004 Black Handle Innerliner Scraper BLACK HANDLED TIRE DENAILER • Recessed tip to allow nails or other puncturing objects to be pushed back through the tire • MADE IN THE USA RECESSED TIP 518-90060 ASCOT NO. MFG. NO. DESCRIPTION 518-90060 ATS60K Tubeless Tire Insert Kit ASCOT NO. 537-00353 TIRE PROBE AWL • Used to inspect injuries in tires and to remove small stones and debris REMOVES SMALL STONES & DEBRIS TIRE REPAIR TOOL POUCH • Durable nylon pouch • 3-color tread depth gauge • 5-50 psi pencil gauge • Valve core tool • White crayon • Ink pen 537-00001 ASCOT NO. MFG. NO. DESCRIPTION 537-00001 AWL-1 Black Handle Awl ASCOT NO. MFG. NO. DESCRIPTION 736-10004 TTP DURABLE NYLON POUCH MFG. NO. 353 BLADE LENGTH 7" RECESS DEPTH 1/8" POINT DIAMETER 5/16" OVERALL LENGTH 6-1/2" Tire Repair Tool Pouch 736-10004 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 423 XLIGHT TIRE SERVICE LED WORK LIGHT • Designed for hands-free lighting during tire service and other work applications • 14" adjustable spring-tube for optimum light positioning within tight spaces • 2-stage compact high-power LED light provides 125 & 250 lumen output • Multiple highpower magnets on the handle and light-head attract easily to most metal surfaces • Lithium-ion rechargeable battery • Compatible with all passenger, light truck and commercial truck tires • Compatible with all tire spreaders 312-14923 ASCOT NO. MFG. NO. 312-14923 14-923 DESCRIPTION XLight Tire Service LED Work Light LED WORK LAMP ASSEMBLY • LED worklamp for tire spreaders • Directional spotlight for increased visability • 8W COB LED will provide 650 Lumens, 750 Lux at 1M • Stays cool to the touch • Heavy duty LED lens • Swivel head • Stays cool to the touch • Adjustable, flexible gooseneck • Includes mounting bracket ASCOT NO. MFG. NO. 312-08473 TR8473 DESCRIPTION LED Work Lamp Assembly 312-03120 HEAD LIGHT WITH RECHARGEABLE BATTERY • Hands-free, versatile and comfortable with adjustable straps • MATERIAL: Aluminum +ABS+PC • LED: 1-piece high power CREE T6 bulb • BRIGHTNESS: Approx. 500LM for high mode • 4-MODE LED LAMPS: High - Low - Strobe - off • WORKING TIME: Approx. 6 hours on High; Approx. 12 hours on Low • CHARGING TIME: Approx. 5 hours • RECHARGEABLE BATTERIES: 2x 3.7V 1800mAh Li-ion batteries (3600mAh total battery capacity) • Sensor Function • USB cable included ASCOT NO. MFG. NO. 312-03120 THL2019 DESCRIPTION CREE Head Light with Rechargeable Battery 312-04146 TIRE SERVICE LED WORK LIGHT & REPLACEMENT LAMP HEAD • 1-piece 3W high power LED • Three convenient switch modes so that you can operate at the power you need: High - Low - Off • Working time of approx. 3 hours • Charging time of approx. 3 hours • Brightness of approx. 200LM for High & 80LM for Low • Magnet on lamp body and head • Charging indicator on lamp head • Detachable head with quick-clip mounting to body • Smart clamp design for 9mm-32mm distance • MULTI USE - Clamping, magnetic, hand-held • Battery: Customized 3.7V 900mAh rechargeable polymer battery • INCLUDED: 5V 0.6A (UL) adapter + USB cable ASCOT NO. MFG. NO. 312-04146 312-04147 DESCRIPTION TWL3035 TWL3035H Tire Service LED Light w/ USB Adapter Replacement Lamp Head for Tire Service Light WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS Designed for hands-free lighting during tire service and other applications

424 TIRE REPAIR Tire Spreaders & Repair Stations HEAVY DUTY TUBELESS TRUCK TUBE/TIRE DUNKERS • Space saving design requires 40% less space • New design fits in left or right corners • Entire rim and tire are checked for air leaks simultaneously • ONE MAN OPERATION: Safe and easy to operate, no lifting • 360˚ TURN IN WATER: Easy and fast inspection • Uni-quick ratchet type adapter adjusts from 15" dia. to 52" dia.and instantly lifts up to 400 lb. RVs to super singles • Optional inner tube adapter allows you to check tubes up to 50" in diameter ALL PURPOSE “EF” FULL CIRCLE TIRE SPREADER • Expose tire defects immediately! • Bead Diameter minimum 13.5", maximum 25.5" • Cross Sections minimum 5", maximum 21.5" • Revolve the tire 360° for inspection, repair and buffing or installing tubes, flaps and air bags inside curing rims • Maximum operating pressure of 150 PSI • Air-operated lift raises tire to inspection position QUICKLY EXPOSES TIRE DEFECTS 517-00039 REVOLVES THE TIRE 360° SPACE SAVING DESIGN ONE-MAN OPERATION 517-00055 ASCOT NO. MFG. NO. 517-00100 100TTD 517-00039 517-00055 39ED 55T DESCRIPTION E-Z Dunk Truck Tire Dunker, Range 15" - 50" Diameter 39" Dia. x 24" Depth Passenger & RV Tube & Tire Dunker with Polyethylene Tank T & G 55" Dia. x 24" Depth Truck & Grader Tube Dunker with Polyethylene Tank EZ-110D TRUCK TIRE DUNKER W/LIFT • One man operation • Picks up tire in and out of water • Adapter for 8 – 10 hole wheels • 55" x 24" Poly tub • Optional Inner tube/tire spider available • Submerges entire tire under water • Can rotate under water for easy marking ASCOT NO. MFG. NO. 517-11033 EZ-110D DESCRIPTION EZ-110D Truck Tire Dunker w/Lift 517-11033 ASCOT NO. MFG. NO. 602-60210 EF 602-60210 DESCRIPTION All Purpose Full Circle Tire Spreader BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 425 HEAVY DUTY “EF/HD” FULL CIRCLE TIRE SPREADER • Designed to lift and spread truck, bus, tractor and some aircraft tires 14" thru 24", 20-ply, including steel radial tires • Revolves 360°, while spread, for easy excellent inspection • Conveniently located floor-mount controls • Diameter arms easily slide into position to hold inner beads before spreading 602-60211 INVERTING TIRE SPREADER/ REPAIR STATION • Spreads and inverts passenger, truck and bus tires with ease for inspection and repair • Foot control valve conveniently located at base of machine • Adjustable lamp swings in and out of tire 604-05 ASCOT NO. MFG. NO. 602-60211 EF-HD DESCRIPTION Heavy Duty Full Circle Tire Spreader ASCOT NO. MFG. NO. 604-05120 5120 DESCRIPTION Inverting Tire Spreader/Repair Station PASSENGER/ LIGHT TRUCK TIRE SPREADER • Handles passenger and light truck tires up to 20" • Controlled tension release to avoid snap-back on tough sidewalls • Easily rotate the tire to locate the repair point • Quick and easy spread of tire and reduced footprint PASSENGER, LIGHT TRUCK AND COMMERCIAL TRUCK TIRE SPREADER • Handles everything from passenger to super-single truck tires • Adjustable height and a tire ramp • Lifts 35" off the ground • Manual rotation with a tool tray that swivels left and right 604-05 604-05045 ASCOT NO. MFG. NO. 604-05045 5045 DESCRIPTION Passenger/Ligh Tire Spreader ASCOT NO. MFG. NO. 604-05500 5500 DESCRIP Passenger, Light Truck and Commercial Tire Spreader WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

426 TIRE REPAIR Tire Spreaders & Repair Stations (cont.) AIR OPERATED TIRE SPREADER • For passenger/RV/light truck tires • Wide platform gives stable work AUTOMATIC TRUCK TIRE SPREADER • Air lift allows operator to lift without lifting the tire/wheel • Heavy gauge steel construction • Work light included • Air regulator/lubricator included FLOOR MOUNT ADJUSTABLE TIRE SPREADER • Provides easy access for repairing passenger and light truck tires • The adjustable tire spreader can accommodate all tires from garden service through light truck • The Tire Spreader has a foot-control swivel, tilts, and is equipped with a tool tray and a floor stand base-plate ASCOT NO. MFG. NO. 603-00275 BJ-S275 DESCRIPTION Air Operated Tire Spreader ASCOT NO. MFG. NO. 603-40200 603-42400 603-43700 603-44000 603-44300 603-44700 603-52000 603-52800 603-52900 603-53100 603-53400 603-53500 402 424 437 440 443 447 520 528 529 531 534 535 DESCRIPTION AIR OPERATED TIRE SPREADER PARTS & ACCESSORIES Cylinder Step Valve Working Light Transformer Power Line Oil-Water Separator Metal Speediness Tie-In Y-Windtight Ring O-Windtight Ring Dustproof Ring Safety Valve Silencer ASCOT NO. MFG. NO. 603-82501 603-82502 603-82503 603-82504 603-82505 603-82506 603-82507 603-82508 603-82509 603-82510 603-82511 658 650 711 712 715 720 728 730 733 736 737 DESCRIPTION AUTOMATIC TRUCK TIRE SPREADER PARTS & ACCESSORIES Handle Valve Air Regulator O-Ring Washer Dustproof Seal Right Angle Connector Middle Union Middle Union Straight Union Rubber O-Ring Oil-Free Piston ASCOT NO. MFG. NO. 604-10300 604-10900 604-11000 604-11900 604-12700 103 109 110 119 127 DESCRIPTION FLOOR MOUNT ADJUSTABLE TIRE SPREADER PARTS & ACCESSORIES Spread Hook Set Roller Sets Spread Hook Set Foot Board Rubber Cover ASCOT NO. MFG. NO. 604-01275 BJ-275B DESCRIPTION Floor Mount Adjustable Tire Spreader ASCOT NO. MFG. NO. 603-00825 BJ-S825 DESCRIPTION Automatic Truck Tire Spreader 604-01275 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

TIRE REPAIR 427 ADJUSTABLE CENTER-POST TIRE SPREADER • Easy to use • Durable • Adjustable from 0" to 10" MANUAL TIRE SPREADER • Lightweight and easy to use • Special locking pin for safety • Made from durable materials • Locks both beads open for easy tire inspection and repair 602-08028 ASCOT NO. 602-08028 DESCRIPTION Adjustable Center-Post Tire Spreader ASCOT NO. MFG. NO. 605-14191 MS-1 DESCRIPTION Manual Tire Spreader MANUAL TIRE SPREADERS TIRE SPREADER • For large truck tires • Used in pairs • Spreads tires up to 17" span • Spreading power of a car jack • Heavy duty construction • Weight: 4-1/4 Lbs. 605-31554 605-00101 ASCOT NO. MFG. NO. 605-00101 GTS-01 DESCRIPTION Tire Spreader ASCOT NO. MFG. NO. 605-31554 T54 DESCRIPTION Manual Tire Spreader WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ASCOT SUPPLY CORPORATION BUYER'S GUIDE TIRE REPAIR MATERIALS

428 TIRE REPAIR Cabinets & Storage HEAVY DUTY TIRE REPAIR CABINET Features sliding storage drawers with rollers. • SIZE: 19.6" x 10" x 26" • 2 shelves inside (3 storage levels) • 2 tool hook sets on two inside doors • 2 sliding storage drawers with rollers • Switch-to-open handle • Optional shelf available • WEIGHT: 36 lbs. ASCOT NO. MFG. NO. 719-12001 719-12011 DESCRIPTION TBG-WC12001 TBG-WC12001-01 Heavy Duty Tire Repair Cabinet Optional Shelf for Tire Repair Cabinet 719-12001 18-DRAWER METAL STORAGE CABINET • CABINET SIZE: 33-3/4" (W) x 11-3/4" (D) x 10-3/4" (H) • DRAWER SIZE: 4-7/8" (W) x 11-1/4" (D) x 2-3/4" (H) • Modular drawer design for efficiency and organization • Heavy-duty, welded steel construction provides strength and stability • Drawers feature stoppers to prevent accidental pulling or spilling • Full-width handles and easy glide runners • Shipped fully assembled and ready to use • WEIGHT: 45 lbs. ASCOT NO. MFG. NO. 719-00018 18D DESCRIPTION 18-Drawer Metal Storage Cabinet 719-00018 32-BIN METAL STORAGE CABINET • CABINET SIZE: 33-3/4" (W) x 8-1/2" (D) x 19-1/4" (H) • DRAWER SIZE: 4" (W) x 8-3/8" (D) x 4-1/2" (H) • Keeps your tools and accessories organized and accessible • Heavy-duty, welded steel construction provides strength and stability • Hemmed bin fronts for retaining parts • Mounting holes located in the top and bottom • Shipped fully assembled and ready to use • WEIGHT: 37 lbs. ASCOT NO. MFG. NO. 719-00032 32B DESCRIPTION 32-Bin Metal Storage Cabinet *Actual product appearance may vary 719-00032 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION TIRE REPAIR MATERIALS

429 Rasp Blades & Spacers Retread Accessories Retread Consumables Tire Appearance Envelopes WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE RETREADING

430 RETREADING BLADE MATCHING Rasp Blades and Spacers PINCOTT® STANDARD SERIES BUFFING RASP BLADE SPACERS Progressive development of blades capable of higher rates of rubber removal and the use of more powerful and higher speed machines imposed increasingly severe temperature conditions on rasp blades, giving rise to the need for effective cooling to avoid loss of temper in the blade material. ASCOT NO. MFG. NO. 613-00414 613-00418 613-00438 613-04316 613-04516 613-04532 613-00514 613-00518 613-00538 613-53165 613-00614 613-00618 613-00638 613-06316 613-06516 613-06532 DESCRIPTION R4S14DL R4S18SL R4S38DL R4S316SL R4S516DL R4S532SL R5S14DL R5S18SL R5S38DL R5S316SL R6S14DL R6S18SL R6S38DL R6S316SL R6S516DL R6S532SL Available for contoured hubs 1 2 3 Model/Make of Buffer Arbor Hole Size Keyway Size, if any 4 Pin Length 5 6 Rasp Blade Type Hub Type: Non-Spiral, Heavy-Duty, All Purpose or Regular 1/4" Double 1/8" Single 3/8" Double 3/16" Single 5/16" Double 5/32" Single 1/4" Double 1/8" Single 3/8" Double 3/16" Single 1/4" Double 1/8" Single 3/8" Double 3/16" Single 5/16" Double 5/32" Single Allows cross ventilation and cleaning of cut rubber through the rasps head R4 SERIES 28 Blades Per Set R115, 5 SEGMENTS SERIES SINGLE SECTION 1/8", 5/32", 3/16" 25 Blades Per Set P3, 6 SEGMENTS SERIES 30 Blades Per Set SPACERS FOR 9" 4-SEGMENT SPACERS FOR 11.5" 5-SEGMENT ASCOT NO. MFG. NO. 616-00320 616-00325 616-00416 616-00420 616-00425 616-11520 616-11525 PTP3-20 PTP3-25 PTR4-20 PTR4-25 SPACERS FOR 11.5" 6-SEGMENT PINCOTT® DESCRIPTION Fits 11.5" 6-Segment Hubs Fits 11.5" 6-Segment Hubs PTR4 -16 Fits 9" 4-Segment Hubs Fits 9" 4-Segment Hubs Fits 9" 4-Segment Hubs PTR115-20 Fits 11.5" 5-Segment Hubs Fist 11.5" 5-Segment Hubs PTR115-25 RASP BLADES - ULTRA SERIES Unique tooth setting to enhance the strength of the teeth and produce cooler *Other sizes available for contoured hubs and use with smart blades PINCOTT® RASP BLADES - STANDARD SERIES • Exclusive heat treating process • Reduced tooth breakage • Cooler running • Faster material removal • No blade warpage • Lower cost per buffed tire APPLICATION GUIDE Increased material between I.D. of blade and mounting pins to reduce the risk of blade breakage Saturn hub pictured in Bandag setup with 20 each R4S38DL and 4 each R4S316SL. ASCOT NO. MFG. NO. Ultra I Ultra II Ultra III 616-00111 616-00222 616-00333 DESCRIPTION Fits All 11.5", 5-Segmented Hubs Fits All 9", 4-Segmented Hubs Fits All 11.5", 6-Segmented Hubs BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION RETREADING HOW TO ORDER BUFFING HUBS

RETREADING 431 PINCOTT® RASP BLADES - SMART SERIES • Manufactured with a unique sinusodial (wave-like) form which introduces a multidirectional cutting action • Wave-like form creates greater strength in the blade and its teeth • Cutting action produces less drag on the rasp motor, saving you energy HUB FOR EAGLE II • Eagle II for use on most Bandag buffers ASCOT NO. MFG. NO. DESCRIPTION 613-12900 SIDE VIEW FRONT VIEW ASCOT NO. MFG. NO. 616-01155 616-00944 616-01156 Smart I Smart II DESCRIPTION Fits all 11.5", 5-Segmented Hubs Fits all 9", 4-Segmented Hubs Smart III Fits all 11.5", 6-Segmented Hubs 111031 Eagle II 9" Dia., 4" W., 1-1/2" Arbor TURBO HOLE APPLICATION • B & J Rasps can be ordered with Turbo cooling channels producing a significant increase in cooling effect and blade performance. These can be retrofitted to all existing B & J rasps. ASCOT NO. MFG. NO. 616-11400 111400 DESCRIPTION Turbo Hole Application 616-11400 613-12900 EAGLE II BUFFING BLADES HAND RESHARPENING STONE • Used to hone the inside and outside of curved surfaces • Wooden Handle • Fast cutting and long lasting rasps for the best texture in all tire buffing operations • Tested under all conditions with outstanding results 534-80057 ASCOT NO. MFG. NO. 616-11275 121181 BUFFING BLADES • Proven to be the fastest cutting, longest lasting rasps with the best texture for all buffing operations • Can be used in existing Saturn II or R4 hub assemblies • Fast cutting, long life. Same texture from start to finish • QUANTITY: 30 sets per box ASCOT NO. MFG. NO. 616-43912 616-43914 616-43920 616-43921 616-11116 616-01420 616-11521 616-21525 616-43928 616-43940 616-11173 111136 111137 111140 111141 111116 111119 111107 111104 121177 111172 111173 DESCRIPTION TYPE Refill Refill Refill Refill Refill Refill Refill Refill Refill Refill Refill BLADES PER SET Apollo II Apollo III S115-25 S115-20 R-4-25 R-4-20 R-115-20 R-115-25 Patriot II Gemini II/SII Gemini II/R4 28 30 30 30 28 28 25 25 28 28 28 DESCRIPTION Eagle II Refill BLADES PER SET Eagle II refills 28 per set REPLACEMENT PINS FOR ROCKET HUBS • Special convex style hubs used on buffers must be returned to factory for pin replacement ASCOT NO. MFG. NO. 534-80057 819206 DESCRIPTION Hand Resharpening Stone ASCOT NO. 613-43934 613-43935 613-43936 613-43937 613-43938 613-43939 MFG. NO. 111207 111207 111207 111207 111207 111207 613-43940 111205 613-43941 613-43924 613-43943 111206 111208 111208 DIA. LENGTH 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 2-1/2" 3" 3-1/8" 3-1/4" 3-3/8" 3-1/2" 3-3/4" 4" 4-1/2" 5/16" 5" ASCOT NO. 613-43944 613-43945 613-43946 613-43831 613-43813 613-43812 613-43897 613-43814 613-43811 613-43815 MFG. NO. 111208 111208 111208 111208 111203 111203 111201 111202 111204 111204 DIA. LENGTH 5/16" 5-3/4" 5/16" 6" 5/16" 5/16" 1/4" 1/4" 6-1/2" 8" 3" 3-3/8" 1/4" 3-3/4" 1/4" 1/4" 1/4" 4" 6" 8" WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE RETREADING

432 RETREADING REPLACEMENT PINS & SPACERS FOR ROCKET HUBS Rasp Blades and Spacers (cont.) ASCOT NO. MFG. NO. DESCRIPTION R-115 STYLE 613-11205 613-11206 613-11207 613-11301 613-11302 613-11303 616-11304 616-11305 613-11328 613-11329 613-11330 613-11205 613-11206 613-11207 613-11205 613-11206 613-11207 613-11341 613-11342 613-11343 616-11346 616-11347 111205 111206 111207 111301 111302 111303 111304 111305 111328 111329 111330 111205 111206 111207 111205 111206 111207 111341 111342 111343 111346 111347 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long 5/16" Pins / 3-3/8" Long Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer R-115 Aircooled Spacer 3/8" R-115 Aircooled Spacer 1/4" SATURN II STYLE Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long 5/16" Pins / 3-3/8" Long SATURN III STYLE 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long 5/16" Pins / 3-3/8" Long Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer Saturn III Aircooled Spacer 3/8" Saturn III Aircooled Spacer 1/4" PINS FOR EAGLE II HUBS ASCOT NO. MFG. NO. 613-11206 111206 ASCOT NO. MFG. NO. DESCRIPTION EAGLE I STYLE 613-11380 613-11381 613-11382 613-11205 613-11206 613-11383 613-11384 613-11385 613-11205 613-11206 613-11201 613-11202 613-11310 613-11311 613-11312 616-11313 616-11314 111380 111381 111382 111205 111206 111383 111384 111385 111205 111206 111201 111202 111310 111311 111312 111313 111314 Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long EAGLE II STYLE Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer 5/16" Pins / 3-3/4" Long 5/16" Pins / 4" Long R4 STYLE 1/4" Pins / 3-3/4" Long 1/4" Pins / 4" Long Aluminum I-Beam 3/8" Spacer Aluminum I-Beam 1/4" Spacer Aluminum I-Beam 3/16" Spacer R4 Aircooled Spacer 3/8" R4 Aircooled Spacer 1/4"616-11206 To properly rebuild a Saturn II rasp hub order the following components: QTY. 8 20 4 MFG. NO. 111205 111328 111330 DESCRIPTION 5/16" x 3-3/4" Pins 3/8" I-Beam Spacers 3/16" I-Beam Spacers Note: For optimum performance replace spacers and pins as a set DESCRIPTION Eagle II Long Pins 5/16" SATURN II STYLE AIR COOLED SPACER ASCOT NO. MFG. NO. 616-11365 DESCRIPTION 111365 Saturn II Aircooled Aluminum Spacer 3/8" – 2 Pinholes for Saturn II US Domestic Rasp B & J OUTER SUPPORT SPACERS ASCOT NO. MFG. NO. DESCRIPTION 613-11391 111391 Saturn II Outer Support Spacers (Box of 8) REPLACEMENT SPACERS FOR EAGLE II HUBS ASCOT NO. MFG. NO. DESCRIPTION 613-11383 613-11384 613-11385 111383 111384 111385 Eagle II Spacer (Standard) Eagle II Spacer Eagle II Spacer REPLACING HUBS, PINS & SPACERS 616-11206 WIDTH 3/8" 1/4" 3/16" APPLICATION GUIDE BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION RETREADING

RETREADING 433 ROCKET RASP ROTARY GOUGES PINCOTT® ROTARY GOUGES ASCOT NO. MFG. NO. 613-91501 613-91502 901501 901502 616-11605 ASCOT NO. MFG. NO. 616-11603 616-11604 616-11605 616-11606 616-11610 616-11612 616-16101 616-16102 616-16121 616-16122 810603 810604 810605 810606 810610 810612 810610-1 810610-2 810612-1 810612-2 DESCRIPTION 1-1/4" Dia. Mini No Notch 3/8" 24 THD (3/Set) 1-1/4" Dia. Mini No Notch 3/8" AH (3/Set) 2" Dia. Heavy Wall No Notch 1/2" AH 2" Dia. Heavy Wall No Notch 1/2" AH 2" Dia. Thin Wall No Notch 3/8" AH (2/Set) 2" Dia. Thin Wall Notched 3/8" AH (2/Set) 2" Dia. Thin Wall No Notch 1/2" AH (2/Set) 2" Dia. Thin Wall No Notch 3/8" 24 THD (2/Set) 2" Dia. Thin Wall Notched 1/2" AH (2/Set) 2" Dia. Thin Wall Notched 3/8" 24 THD (2/Set) B & J ROCKET SQUIGGLY RASP • Fast Rubber Removal • No scorching • Easy Control • Long life • No regritting costs 616-82013 ASCOT NO. MFG. NO. 616-82013 616-82014 820103 820104 DESCRIPTION 10 Blades w/ Support Plate (10 per Pack) 24 Blades w/ Support Plate (24 per Pack) 616-11612 613-91503 613-91321 613-91322 613-91207 PINCOTT® 901503 901321 901322 901207 DESCRIPTION 2" Dia. Heavy Wall, 1/2" Arbor Hole (2 per Box) 2" Dia. Heavy Wall, 3/8"-24 Thread Arbor Hole (2 per Box) 2" Dia. Thin Wall, 3/8" Arbor Hole (2 per Box) 1-1/4" Dia. Heavy Wall, 3/8"-24 Thread Arbor Hole (3 per Box) 1-1/4" Dia. Thin Wall, 3/8" Arbor Hole (3 per Box) 3/4" Dia. Thin Wall, 3/8"-24 Thread Arbor Hole (4 per Box) MINI RASPS ASCOT NO. MFG. NO. 539-00005 539-00006 PTP5 PTP6 DESCRIPTION P5 Refill (6 per Box) P6 Refill (6 per Box) Retread Accessories PRECURE SHOP ACCESSORIES MINI RASPS • These Mini Rasps are very efficient when larger amounts of rubber have to be removed quickly, for example in the event of very large repairs they can drastically reduce the required buffout time • Both Mini Rasp versions are available individually or as complete, ready-to-use kits with adapters for use on quick change chucks ASCOT NO. MFG. NO. 539-11075 111075 539-11134 539-11076 539-11133 111134 111076 111133 DESCRIPTION R-5 Rasp Complete (1 Set of R-5 Refills, 6 Alu Washer, NV 11 Adapter R-5) R-5 Refills (1 Set of 5 Pieces) R-6 Rasp Complete (1 Set of R-6 Refills, 7 Alu Washers, NV 11 Adapter R-6) R-6 Refills (1 Set of 6 Pieces) 539-11075 639-11073 539-11076 ASCOT NO. ITEM NO. 639-11081 639-11139 11081F 11139F 639-50806 639-50184 639-42308 639-42312 ED-508C-06 ED-5018C-14 ESBNK-4023-08 SBNK4023-12 DESCRIPTION Duofast Air Stapler F1B-50-16 Bostitch Air Stapler 31, F1B-84-16 Duofast 1/4" Staples (5,000 per Box, 20 Boxes per Case) Duofast 9/16" Staples (5,000 per Box, 20 Boxes per Case) Bostitch 5/16" Staples (10,000 per Box, 20 Boxes per Case) Bostitch 1/2" Staples (10,000 per Box, 10 Boxes per Case) WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE RETREADING

434 RETREADING Retread Accessories (cont.) PRECURE TREAD STAPLES ASCOT NO. MFG. NO. 639-10800 639-02338 639-05010 639-08008 639-05012 11073F ESBNK402310 ED5010C08 EB8008 ED5012C10 NAILHOLE TESTER/SPREADER DESCRIPTION Fasco Staple Gun F1B 80-16 Bostitch 3/8" Staples (10,000 per Box, 20 Boxes per Case) Duofast 5/16" Staples (5000 per Box, 20 Boxes per Case) 20ga Chisel Point 5/16" Staples - Fits Fasco, BeA (10,000 per Box, 24 Boxes per Case) Duofast 3/8" Staples (5000 per Box, 20 Boxes per Case) TEFLON HOSE ASSEMBLIES FOR PRECURE RETREADING SYSTEMS • Teflon hose assemblies in any length are available for all precure tire retreading equipment including Bandag, Harrelson, Vulcan, etc. • Hoses are used inside the chamber for inflating the tire and evacuating the air from the envelope • Hoses are made of an innercore of extruded Teflon and covered with stainless steel braid reinforcement • All hoses have permanent swage-type brass end fittings 1/4"-18 male pipe (NPT) COUPLERS & PLUGS ASCOT NO. MFG. NO. 645-01000 645-00011 1000 11E 645-03000 W-3000HT 645-00321 645-21192 B3HD21Y B3K21192 CST17B DESCRIPTION 1/4" Bandag-Type Coupler Plug Tire Valve Stem Steel Fits 5/16"-32 Ft. High Temperature Washer for 1000 Above HANSEN SPECIAL COUPLER FOR PRESS TYPE MATRIX Coupler (Brass) Plug (Brass) 645-00017 645-00117 645-02014 645-02110 645-01604 645-16171 645-08476 645-00874 645-00812 645-00814 CPST17B 2014EPR 2110EPR 1/4" BANDAG-TYPE COUPLERS/ADAPTERS Chamber Exhaust Coupler (Brass) Chamber Envelope Adapter (Brass) Thin Replacement O-ring Wide Replacement O-ring BH1-60Y4FP BH1-61-711 874-6 874 812 814 PARKER SPECIAL COUPLER MRT Coupler Vacuum Seal MRT Coupler Adapter BAIRD STYLE COUPLERS AND ADAPTERS Straight Thru With 90° Side Exhaust Coupler For Envelope Use 90° Hose Inlet Coupler For Tube .302 Valve Steam Adapter .482 Envelope Adapter ASCOT NO. MFG. NO. 606-57000 606-57001 DESCRIPTION BTT-5700-S Nailhole Tester/Spreader - Steel BTT-5700-SF Nailhole Tester/Spreader - Steel/Fabric • Electric variable speed rotation • Quick change probe heads • Hand and foot operated bi-directional rotation • Auto-stop flaw detection • Visible spark at flaw location • Four air tool ports and two 110V outlets • Accurate flaw detection • Uses standard 110V power • Hand-operated spread and lift • Adjustable work height • Includes medium truck probe PARTS & ACCESSORIES AVAILABLE (SOLD SEPARATELY) 606-57000 645-00017 645-00117 645-01000 645-21192 645-01604 645-08476 645-16171 645-00321 BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION RETREADING

RETREADING 435 651-32437 PORTABLE SPRAYING EQUIPMENT • PORTABLE SPRAYER INCLUDES: Pump, 25' x 1/4" airless hose, gun swivel, silver spray gun and tip of choice • Recommended Graco tip #163-415 RETREAD BRUSHES • Used for applying and stippling in cement ASCOT NO. MFG. NO. 653-40082 40082 DESCRIPTION 2" Diameter Stipple Brush McGEE COMPANY ASCOT NO. MFG. NO. 651-32437 651-35462 651-63415 232-437 235-462 163-415 DESCRIPTION 23:1 Cement Sprayer Silver Airless Spray Gun Only Silver Tip, .015" Orifice, 8-10" Fan Width WYCO FLEXIBLE SHAFT MACHINES • TYPICAL APPLICATIONS INCLUDE: Wood or metal finishing, rust or paint removal, auto body sanding, tire buffing, etc. • Many types of accessories are used with these machines, including edge-type grinding wheels, wire brushes, sanding discs, depressed center wheels, tire rasps, sanding drums TACK BANDS FOR SMOOTH, FINE TEXTURE 539-80002 ASCOT NO. MFG. NO. 539-80002 539-80003 539-80012 539-80013 H12 H11 OX2-R OX3-R 539-80003 DESCRIPTION OX2R 2-1/2” OD x 1” W OX3R 2-1/2” OD x 5/8” W 2-1/2" OD x 1" W 1-1/2" OD x 5/8" W 539-80012 539-80013 WHEEL ARBOR-ADAPTERS • For grinding wheels or wire brushes • 9/16"- 18 female thread to fit Wyco handpieces ASCOT NO. MFG. NO. ASCOT NO. 516-00491 516-00492 516-00493 MFG. NO. 49-1 49-2 49-3 516-00494 49-4 516-00495 49-5 516-00496 49-6 516-04914 49-14 CORE CASING & HAND PC. NO. 10R 10R 2R 2R 30R 30R 4R LENGTH (FEET) CORE NO. CASING 5 5 6 6 7 7 7 C-10 C-10 C-2 C-2 C-30 C-30 C-4 K-10 K-10 K-2 K-2 K-30 K-30 K-4 STRAIGHT HAND PC. 3500 3500 3500 3500 551 551 551 516-00305 516-00405 516-00505 516-00605 305 405 505 605 WHEEL WIDTH MALE THREAD FOR GRINDING WHEELS AND OTHER ACCESSORIES 5/8" 1" 1-1/2" 1-1/2" ASCOT NO. MFG. NO. 516-01305 516-01405 305R 405R DESCRIPTION FOR ROTARY RASPS Threaded 3/8" (16 To Fit Rasps) Threaded 1/2" (13 To Fit Rasps) 3/8"–24 1/2"–20 1/2"–20 5/8"–18 WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE RETREADING

436 RETREADING Retread Accessories (cont.) Expandable Hub Assembly EXPANDABLE RIM ASSEMBLIES & REPLACEMENT BELTS EXP. RIM ASSEMBLIES ASCOT NO. 613-39020 613-00436 613-33379 613-28081 613-32769 613-00937 613-28313 613-00938 613-00465 613-32774 613-28271 613-00470 613-00674 EXP. RIM ASSEMBLIES MFG. NO. RIM 309020 12-14" 309962 309963 309942 309140 309150 309952 309202 309211 13-16" 13-16" 14-17" 14-17" 14-17" 14-17" BEAD WIDTH 5" 309030 13-16" 6-3/8" 7-1/2" 11-3/8" 6" 7-1/8" 9-1/4" 11-3/8" 309040 17-20" 6-1/2" 17-20" 8-1/4" 18-20" 7-5/8" 309220 17-20" 13-1/4" 309230 18-20" 16-3/8" REPL. BELTS ASCOT NO. 613-28260 613-00660 613-33382 613-28160 613-32773 613-02701 613-02821 613-02702 613-01653 613-32778 613-33717 613-01332 613-02092 EXPANDABLE HUB REPLACEMENT STEMS REPL. BELTS MFG. NO. 309510 309520 309521 309522 309541 309540 309550 309560 309570 309242 309354 309580 309356 EXP. RIM ASSEMBLIES ASCOT NO. 613-23800 613-00466 613-32822 613-33162 613-25718 613-33093 613-00846 613-00467 613-33564 613-00839 613-00699 613-00705 EXP. RIM ASSEMBLIES MFG. NO. RIM BEAD WIDTH 309602 20-22.5" 8-1/4" 309050 20-22.5" 9" 309183 20-22.5" 11-3/4" 309021 20-22.5" 14-1/2" 7-1/2" 8-1/4" 9" 22-24.5" 22-24.5" 22-24.5" 22-24.5" 22-24.5" 22-24.5" 13-3/8" 14-1/2" 18-1/2" 14" REPL. BELTS ASCOT NO. 309190 309282 309060 309070 309912 309913 309490 23-25" 13-3/8" 309890 27-29" ENVELOPE SEALING RINGS* • Heavy duty Acme Threads • Sliding shield on outer body • Ergonomic handle • Oil-impregnated bushings Locking Stems Shown 613-33092 613-01715 613-32826 613-33007 613-25839 613-33094 613-02533 613-01955 613-33568 613-02516 613-11955 613-02184 REPL. BELTS MFG. NO. 309622 309610 309612 309491 309600 309302 309630 309640 309641 309643 309500 309644 ASCOT NO. MFG. NO. 613-00512 613-09111 613-19111 613-29617 613-29618 900512 309111 30911L 729617 729618 DESCRIPTION Garter Spring 4 Lock 8 Plain Stem Set 12 All Lock Stem Set Steel-Inserted Plain Stem Steel-Inserted Plain Locking Stem POLY EASE RETREAD RELEASE LINER • American made perforated polypylene film is specified to soften at 311°F and melt at 328°F • For low temp bonding chambers • 75 Gauge • Custom widths are also available • High temp film available ASCOT NO. MFG. NO. 634-12027 634-14027 634-15027 634-18027 PP12HD PP14HD PP15HD PP18HD WIDTH LENGTH QTY./BOX WEIGHT/ROLL 26 lb. 30 lb. 32 lb. 33 lb. 12" 14" 15" 18" 2700' 2700' 2700' 2700' 2 2 2 1 538-12900 BANDAG SIDEWALL BUFFING CUP AND BRUSH ASCOT NO. MFG. NO. 538-12900 535-06020 535-03811 RH129 6020 3811 DESCRIPTION 4" Buffing Cup, 3/4" Arbor Hole, SSG 390 Wire Brush, .0118 Wire Size 2" to 3/4" Arbor Hole Adapter Plates ASCOT NO. MFG. NO. 644-12345 644 DESCRIPTION Envelope Sealer Rings “Available Sizes: 14", 15", 16", 16.5", 17", 17.5", 19.5", 20", 22", 22.5", 24" & 24.5" BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION RETREADING

RETREADING 437 STRETCH WICKING PRODUCTS • For use with valve-type envelopes • All 4-ply Retread Consumables JET CUSHION GUM 634-00812 634-00815 634-00820 ASCOT NO. 634-00812 634-00815 634-00820 645-01812 645-01815 DESCRIPTION 8" x 12" Stretch Wicking Pad 8" x 15" Stretch Wicking Pad 8" x 20" Stretch Wicking Pad WKMICH8X12 Michelin Wicking Pad WKMICH8X15 Michelin Wicking Pad QTY./BOX 24 24 24 24 24 • Designed to line skived areas to improve adhesion • Available in multiple widths and thicknesses • Available in black or gr • All sizes sold in approximately 25 lb increments and priced by the pound When ordering cushion gum please specify the curing temperature that you are curing at, the width and thickness of the cushion gum. Please call for more details. STRIPPING STOCK McGEE COMPANY WOVEN ROLL WICKING • For use with non-valve type processes • Full rolls only • Treated with a special release agent to prevent adhesion to the cushion gum 634-05 • Stripping Stock curing temperatures 914, 074, 440 • Free flowing quality stock for stipping edges of tread rubber to cover excess buffed surfaces • APPLICATIONS: Used on sidewalls to improve appearance • 25 lb. box • Available at any gauge & width Please call for more details. JET ROPE RUBBER ASCOT NO. DESCRIPTION 634-05586 Woven Roll Wicking - Green 634-05587 Woven Roll Wicking - Green SIZE 1-1/2" x 180' 2" x 180' • Rubber extruded is rope form • Especially for mini-extruder guns • APPLICATIONS: For filling buzzouts, section repairs, cuts & snags • Available in 1/4" or 3/8" diameters • All sizes sold in approximately 25 lb. increments and priced by the pound RUBBER WICKING PADS • High elasticity compound eliminating tread deformations • Eliminates use of venting poly underneath • Excellent thermal resistance, reducing aging for extended use ASCOT NO. MFG. NO. 634-00115 634-00315 634-00515 DL01-15 DL03-15 DL05-15 48.75" x 6.75" 29" x 5" 634-00115 634-00315 • Use RR074 for repairing with section mold or spotter: 250° - 280° (Regular cure) • Use RR914 for hot or precure retreading: 250° - 320° (High temperature). Fast Cure • Use RR440 for low temperature precure retreading: 200°-250° Please call for more details. 15 15 634-00515 WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE RETREADING 1" Stripping Stock 2" Stripping Stock

438 RETREADING Retread Consumables (cont.) JET RUBBER SOLVENT • Pure Aliphatic Hydrocarbon • Free from oils and impurities • APPLICATIONS: For diluting or thinning heavy viscosity cements and tire paint; For cleaning buffed retread and repair surfaces; For freshening cushion gum and other uncured rubber stocks ASCOT NO. MFG. NO. 633-50105 633-50154 DESCRIPTION CI31-5GAL CI31-54GAL 5-Gallon Container 54-Gallon Container JET BLACK VULCANIZING CEMENT BRUSH TYPE: An excellent repair cement • Contains special additives to bond to exposed cords such as nylon, rayon, fiberglass, polyester & polyaramid • Use within 15 minutes on exposed steel for best adhesion • Superior tack and excellent cured adhesion SPRAY TYPE: An all purpose cement for both hot capping and precure retreading • Also used for repairing • High tack cement • Excellent cured adhesion and provides superior bond and tack • Available in 32 oz. and 54 Gallon ASCOT NO. MFG. NO. 633-83005 633-83015 DESCRIPTION CH03-5GAL CH00-5GAL 5-Gallon Brush Cement 5-Gallon Spray Cement 633-83005 633-50105 Tire Appearance SURE SHOT PRESSURE SPRAYERS • Air pressurized and refillable • Environmentally safe, eliminates aerosol usage • For brake and parts cleaner, penetrating oils, lubricants, degreasers, solvents • MADE IN USA ASCOT NO. MFG. NO. 632-00005 632-00010 632-01002 632-10001 632-02400 DESCRIPTION K-5 K-10 A1002 A1000R M2400S Partial Repair Kit for Model A Sure Shot Sprayers Complete Repair Kit for Model A Sure Shot Sprayers Sure Shot Black Enameled Steel Sprayer w/ Adjustable Nozzle Sure Shot Enameled Steel Sprayer (Red) Anodized Aluminum Sprayer MOLD LUBRICANT (CONCENTRATED) • Release molded retreads with ease and keep molds clean at the same time • This non-flammable, odorless formula allows rubber to flow freely and prevents carbon buildup • Produces a superior satin finish with no staining • Economical concentrate may be diluted with up to 20 parts water to one part lubricant ASCOT NO. 647-24501 647-24505 DESCRIPTION Mold Lubricant (1-Gallon) Mold Lubricant (5-Gallon) 647-24501 632-02400 MADE IN THE USA BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION RETREADING

RETREADING 439 ROBBINS ENVELOPE LUBE • Spray on inside of the envelope, spray on while envelope is hot to dry faster, spray after first cure and then every 30 cures or as needed • Quart container is a convenient spray bottle • Ready to use, no dilution required ASCOT NO. MFG. NO. 647-05611 647-05612 647-05613 5611 5612 5613 DESCRIPTION Robbins Envelope Lube (1-Quart) Robbins Envelope Lube (1-Gallon) Robbins Envelope Lube (5-Gallon) 647-05612 647-05611 ™ NEW LOOK TIRE VENEER • Premium water-based coating with excellent hiding power specifically for retread tires • Revolutionary design applies a matte, rubber veneer finish to the tire's sidewall • Covers and hides all chalk marks • Dries quickly, will not wash off in rain • Ready to use ASCOT NO. MFG. NO. 497-84405 497-84406 NL640 NL55G DESCRIPTION IMI New Look Tire Veneer - 5-Gal Pail IMI New Look Tire Veneer - 55-Gal Drum 497-84405 BLACK-OUT BLACK TIRE PAINT • Ready to use water based black tire paint • Restores the original appearance of retreaded and used tires • Covers crayon marks, scuffs and dirt to give the tire a new fresh look • Works with machine or hand application • Compatible with tire painting machines 497-00005 ASCOT NO. MFG. NO. 497-00005 497-00055 REMA SHINE • Water-based • Excellent for interior plastic and vinyl trim • Deep long-lasting shine • Convenient, ready-to-use formula • Pleasant odor and VOC compliant ASCOT NO. MFG. NO. 395-10100 101000110 DESCRIPTION REMA Shine EXPANDABLE HUB LUBE • Ready-To-Use formula • Quick/easy application • Petroleum/Silicone free • No mess or product build-up on equipment • 70+ tires per application ASCOT NO. MFG. NO. DESCRIPTION 647-00032 EHL-32 Expandable Hub Lube (32 Oz. Spray Bottle) 395-10100 647-00032 DESCRIPTION Blackout-5 Black-Out Black Tire Paint (5-Gallon) Blackout-55 Black-Out Black Tire Paint (55-Gallon) WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION SUPPLY CORPORATION BUYER'S GUIDE RETREADING

440 RETREADING ENVELOPE APPLICATION Envelopes ACCU FIT II/INNERLOPE INSIDE ENVELOPES ASCOT NO. MFG. NO. 643-40001 643-40002 643-40003 643-40004 643-40005 643-40006 643-40007 643-40008 643-40009 643-40010 643-40011 643-40012 643-40013 643-40014 643-40015 643-40016 643-40017 643-40018 40x8-24.5 40x8-24.5 38x8-24.5 42x8-24.5 42x8-24.5 OUTSIDE TIRE SIZE 4422 4223 4224 4422 4422 44x10-24.5 4423 42x10-24.5 4422 42x10-22.5 4422 44x12-22.5 4522 40X8-22.5 4219 44x10-22.5 4522 42x10-22.5 4422 38x8-22.5 35x8-22.5 40x8-22.5 38x8-22.5 35x8-22.5 42x8-22.5 3822 4224 4224 3822 4422 4023 305/75R24.5 Deep Lug 305/75R24.5 285/75R24.5, 275/80R24.5 12R24.5 11R24.5 12.00R24 11.00R24 455/55R22.5 445/65R22.5 18R22.5 445/50R22.5, 315/80R22.5, 305/85R22.5 425/65R22.5 16R22.5 385/65R22.5 15R22.5 305/75R22.5, 305/70R22.5, 295/80R22.5, 295/75R22.5, 275/80R22.5 275/70R22.5, 265/75R22.5, 255/80R22.5, 255/70R22.5, 245/75R22.5, 235/80R22.5 12.75R22.5, 12R22.5, 10.00R22 11R22.5, 10R22.5 9R22.5 11.00R22 B & J ENVELOPE TESTER • Extremely Fast • Detects the smallest leaks • Positive operation • Easy to install • Simple to use • No maintenance required! • Organize and store envelopes conveniently • Mobile, can be moved around the shop wherever needed • Sturdy and easy to maneuver • Color-coded handle grips available to organize envelopes by size • Easy assembly • CART HEIGHT: 39.75" • BASE DIAMETER: 47.83" • LOAD CAPACITY: 1,000 lb. 643-40020 643-40021 643-40022 643-40023 643-40024 643-40025 643-40026 643-40027 643-40028 643-40029 643-40030 643-40031 643-40032 643-40033 643-40034 643-40035 643-40036 643-40037 Envelope Spreader Available. Call for Details. APPLICATION GUIDE ASCOT NO. MFG. NO. 643-40019 42x10-20 42x8-20 44x12-20 40x8-20 42x10-20 38x8-20 35x8-20 35x8-19.5 32x8-19.5 29x7-19.5 29x7-19.5 29x7-17.5 35x8-17.5 32x8-17.5 31x6-17.5 29x7-16 27x5-16 OUTSIDE TIRE SIZE 4422 4423 4522 4224 4422 4023 3822 3521 3521 3218 3218 3117 3822 3521 3218 3218 2916 10.00-15 HB 3521 8.25-15 HB 3218 365/80R20 14/80R20 14.00R20 13/80R20, 11.00R20, 10.00R20 12.00R20 9.00R20 8.25R20 305/70R19.5 285/70R19.5, 265/70R19.5, 24570/R19.5 225/70R19.5 8R19.5 245/70R17.5, 215/75R17.5 11R17.5 10R17.5, 9.5R17.5, 9R17.5 7.50-17 245/75R16, 235/85R16, 215/85R16, 7.50R16 225/75R16 10.00R15 8.25R15 649-83340 ASCOT NO. MFG. NO. 649-83340 833400 DESCRIPTION B & J Envelope Tester ASCOT NO. MFG. NO. 649-40100 840100 DESCRIPTION Envelope Storage Cart BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION RETREADING

441 MEASUREMENT CONVERSIONS Millimeter, Decimal & Fractional Inch Sizes MM .10 .15 .20 .25 .30 .35 .39 .40 .45 .50 .55 .60 .65 .70 .75 .79 .80 .85 .90 .95 1.00 1.05 1.10 1.15 1.19 1.20 1.25 1.35 1.40 1.45 1.50 DECIMAL EQUIV. .0039 .0059 .0079 .0098 .0118 .0135 .0138 .0145 .0156 .0157 .0160 .0177 .0180 .0197 .0200 .0210 .0217 .0225 .0236 .0240 .0250 .0256 .0260 .0280 .0276 .0292 .0295 .0310 .0312 .0315 .0320 .0330 .0335 .0350 .0354 .0360 .0370 .0374 .0380 .0390 .0394 .0400 .0410 .0413 .0420 .0430 .0433 .0452 .0465 .0469 .0472 .0492 1.30 .0512 .0520 .0531 .0550 .0551 .0570 .0591 .0595 1.55 .0610 1.59 1.65 .0625 1.60 .0629 .0635 .0649 1/16" 3/64" 1/32" 2.60 2.70 2.75 2.78 1/64" FRACTION EQUIV. MM 1.70 1.75 1.80 1.85 1.90 1.95 1.98 2.00 2.10 2.15 DECIMAL EQUIV. .0670 .0689 .0700 .0709 .0728 .0730 .0748 .0760 .0767 .0781 .0785 .0787 2.05 .0807 .0810 .0820 .0827 .0846 .0860 2.20 .0866 2.25 2.38 2.45 .0925 .0935 .0937 .0885 .0890 2.30 .0905 2.35 3/32" 2.40 .0945 .0960 .0964 .0980 2.50 .0984 .0995 .1015 .1024 .1040 .1063 .1065 .1082 .1094 .1100 2.80 .1102 .1110 .1130 2.90 3.0 3.10 3.18 3.30 3.40 3.50 3.57 3.60 3.70 3.75 .1141 .1160 .1181 .1200 .1220 .1250 3.20 .1260 3.25 .1279 .1285 .1299 .1338 .1360 .1378 .1405 .1406 .1417 .1440 .1457 .1470 .1476 .1495 3.80 .1496 .1520 9/64" 1/8" 7/64" 5.25 5.30 5.40 5.50 5.56 5.60 5.70 5.75 5.80 5.90 5.95 6.10 4.10 4.20 5/64" 4.25 4.30 4.37 4.40 4.50 4.50 4.60 4.70 4.75 4.76 4.80 4.90 5.00 5.10 5.16 5.20 FRACTION EQUIV. MM DECIMAL EQUIV. 3.90 .1540 3.97 .1562 .1570 4.00 .1575 .1590 .1610 .1614 .1654 .1660 .1673 .1693 .1695 .1719 .1730 .1732 .1770 .1771 .1800 .1771 .1800 .1811 .1820 .1850 .1870 .1875 .1890 .1910 .1929 .1935 .1960 .1968 .1990 .2008 .2010 .2031 .2040 .2047 .2055 .2067 .2086 .2126 .2126 .2130 .2165 .2187 .2205 .2210 .2244 .2263 .2280 .2283 .2323 .2340 .2344 6.00 .2362 .2380 .2401 .2420 6.20 .2441 6.25 .2460 6.30 .2480 6.35 6.40 .2520 6.50 .2559 .2570 .2500 1/4" 15/64" 13/64" 11/64" FRACTION EQUIV. 5/32" MM DECIMAL EQUIV. 6.60 .2610 6.70 6.75 6.75 .2638 .2656 .2657 .2660 6.80 .2677 6.90 .2716 .2720 7.00 7.10 7.14 7.20 7.25 7.30 7.40 7.50 7.54 7.60 3/16" 7.70 7.75 7.80 7.90 7.94 8.00 8.10 8.20 8.25 8.30 8.33 8.40 8.50 8.60 7/32" 8.70 8.73 8.75 8.80 8.90 9.00 9.40 9.50 9.53 9.60 9.70 9.75 9.80 9.90 9.92 10.32 .2756 .2770 .2795 .2811 .2812 .2835 .2854 .2874 .2900 .2913 .2950 .2953 .2968 .2992 .3020 .3031 .3051 .3071 .3110 .3125 .3150 .3160 .3189 .3228 .3230 .3248 .3268 .3261 .3307 .3320 .3346 .3386 .3390 .3425 .3437 .3445 .3465 .3480 .3504 .3543 .3580 .3701 .3740 .3750 .3770 .3780 .3819 .3838 .3858 .3898 .3906 10.00 .3937 .3970 .4040 .4062 .4130 .4134 10.50 11/32" 19/64" 9/32" FRACTION EQUIV. 17/64" MM 11.00 11.11 11.50 11.51 11.91 DECIMAL EQUIV. .4330 .4375 .4528 .4531 .4687 12.00 .4724 12.30 12.50 12.70 13.00 .5118 13.10 13.49 13.50 13.89 .4843 .4921 .5000 .5156 .5312 .5315 .5469 14.00 .5512 14.29 14.50 14.68 .5625 .5709 .5781 15.00 .5906 15.08 15.48 15.50 15.88 5/16" 16.00 .6299 16.27 16.50 16.67 17.00 17.06 17.46 17.50 17.86 21/64" 18.00 .7087 18.26 18.50 18.65 .7187 .7283 .7344 19.00 .7480 19.05 19.45 19.50 19.84 20.00 .7874 20.24 .7500 .7656 .7677 .7812 .7969 21.00 .8268 21.03 21.43 21.50 21.83 3/8" 15/64" 22.00 .8661 22.23 22.50 22.62 .8281 .8437 .8465 .8594 .8750 .8858 .8906 23.00 .9055 23.02 23.42 23.50 23.81 25/64" 13/32" .9062 .9219 .9252 .9375 24.00 .9449 24.21 24.50 24.61 25.00 .9843 25.03 25.40 .9531 .9646 .9687 .9844 1.000 .5937 .6094 .6102 .6250 .6406 .6496 .6562 .6693 .6719 .6875 .6890 .7031 FRACTION EQUIV. 7/16" 29/64" 15/32" 31/64" 1/2" 33/64" 17/32" 35/64" 9/16" 37/64" 19/32" 39/64" 5/8" 41/64" 21/32" 43/64" 11/16" 45/64" 23/32" 47/64" 3/4" 49/64" 25/32" 51/64" 53/64" 27/32" 55/64" 7/8" 57/64" 29/32" 59/64" 15/16" 61/84" 31/32" 63/64" 1" INCH X 25.40 = MM MM X 0.03937 = INCHES WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION

442 ALPHABETICAL INDEX // A // Agricultural Boots ............................................................................... 399 Air Checking Stations ..........................................................................273 Air Chucks .............................................................................................275 Air Chucks - Ball Foot ..........................................................................276 Air Chucks - Dual Foot .........................................................................276 Air Chucks - Euro .................................................................................276 Air Chucks - Lock-On ...........................................................................276 Air Compressor Parts & Accessories .....................................................17 Air Compressors ..................................................................................... 14 Air Drills ................................................................................................. 50 Air Dryers ................................................................................................ 19 Air Gauges ............................................................................................278 Air Hose Accessories ..............................................................................36 Air Hose - Replacements .................................................................... 294 Air Hoses ..................................................................................................31 Air Line Inflator Gauges - Large Bore ................................................282 Air Line Inflators ...................................................................................282 Air Ratchets ............................................................................................47 Air Staplers ...........................................................................................433 Air Tanks .................................................................................................36 Air Tank Accessories ..............................................................................36 Air Tool Accessories ................................................................................51 Air Tool Filters ........................................................................................24 Air Tool Lubricants & Conditioners ........................................................71 Air Tool Parts & Accessories - RPG .......................................................54 Air Tools ................................................................................................. 66 Air Tools - RPG .......................................................................................56 Alignment Equipment ..........................................................................351 Alignment Tools .................................................................................. 340 Angle Connector ................................................................................. 264 Anti-Seize Compound.......................................................................... 167 Anti-Freeze Bibb ..................................................................................378 // B // Balancing Beads - ATV/UTV ................................................................334 Balancing Beads - Counteract ............................................................333 Balancing Beads - EcoBalance ...........................................................334 Balancing Beads - EQUAL FLEXX .......................................................336 Balancing Beads - MAGNUM+ .............................................................337 Balancing Beads - Motorcycle ............................................................335 Batteries .................................................................................................65 Battery Chargers & Testers ..................................................................355 Bead Breakers ...................................................................................... 170 Bead Breaking Tools .............................................................................174 Bead Expanders ................................................................................... 189 Bead Holders ........................................................................................ 189 Bead Hooks .......................................................................................... 180 Bead Lever Tools ................................................................................. 294 Bead Lock ............................................................................................. 192 Bead Push Tools ................................................................................... 180 Bead Sealers ........................................................................................393 Bead Seater Upgrade Kits ................................................................... 186 Bead Seaters ........................................................................................ 184 Bead Seating Stands ........................................................................... 186 Bench Grinders ....................................................................................359 Bench Vises ..........................................................................................359 Block-Off Collar ...................................................................................265 Blow Gun Kit ...........................................................................................36 Blow Guns ...............................................................................................32 Bolt Kit .................................................................................................. 102 Brake Cleaner ....................................................................................... 165 Brake Drum Handler ............................................................................ 156 Brake Drum Hardware ......................................................................... 102 Brake Hub Cleaning Discs .....................................................................110 Brake Lining Thickness Gauge ........................................................... 268 Brooms ................................................................................................. 362 Brushes - Sidewall ...............................................................................362 Buffing Hub .......................................................................................... 431 Buffing Solutions ................................................................................404 Buffing Stones ..................................................................................... 420 Buffout Wheels ................................................................................... 408 // C // Calcium Chloride Pump .......................................................................190 Camber and Caster Tools .....................................................................342 Camber and Caster Tools - Heavy Duty ............................................ 348 Cap Nuts................................................................................................100 Carbide Cutting Tools ......................................................................... 420 Center Cap Remover ........................................................................... 205 Centering Pins ........................................................................................ 91 Centering Sleeves ................................................................................. 90 Check Valve ......................................................................................... 260 Clamps ....................................................................................................39 Collets .................................................................................................. 309 Collet Spacers ...................................................................................... 309 Compressor Drains .................................................................................24 Cone Kit ................................................................................................ 309 Contour Wheels ................................................................................... 408 Cord Reels ...............................................................................................29 Core Housing ........................................................................................259 Couplers ..................................................................................................34 Couplers - Female ..................................................................................35 Couplers & Plugs ....................................................................................33 Crib Stands ........................................................................................... 182 Cribbing Blocks .................................................................................... 182 Cushion Gums ...................................................................................... 394 Cut-Off Tools ..........................................................................................48 Cutters .....................................................................................................48 // D // Disc/Dish Sidewall Wheels .................................................................. 416 DOT Conspicuity Tape .......................................................................... 381 Drain Pans .............................................................................................373 Driving Irons ..........................................................................................174 Dual Wheel Separator ........................................................................ 206 Dunk Tanks............................................................................................ 374 // E // Ear Plugs .............................................................................................. 380 Engine Cranes ....................................................................................... 155 Envelope Lubricant ............................................................................. 439 Envelope Storage Cart ........................................................................440 Envelope Testers .................................................................................440 Envelopes .............................................................................................440 Exhaust Hoses ......................................................................................358 Exhaust Ventilation Systems ...............................................................358 Eye Wash Stations ............................................................................... 381 // F // Face Shields ......................................................................................... 380 Filter & Regulator Accessories ..............................................................27 Filters - Coalescing/Oil Removing ........................................................26 Filters - General Purpose.......................................................................26 Filters - Modular .....................................................................................25 Filters & Regulators - Combination ......................................................25 Flange Plate Kit ................................................................................... 309 Floor Dispenser Rack .......................................................................... 369 Floor Mats ............................................................................................ 368 Floor Start-Up Kits .............................................................................. 369 SUPPLY CORPORATION

443 ALPHABETICAL INDEX // G // Grinders ................................................................................................. 49 Grommets - Replacements .................................................................245 // H // Hammer Replacement Handles .......................................................... 201 Hammers ............................................................................................... 199 Hand Cleaners ......................................................................................363 Hand Wipes ..........................................................................................362 Hex Nut Remover ................................................................................. 105 Hose Cutter .............................................................................................32 Hose Reel Bumpers ................................................................................29 Hose Reels ..............................................................................................28 Hoses ..................................................................................................... 179 Housings ...............................................................................................254 Hub Centering Solutions .................................................................... 306 Hub Cover Installation Tool ................................................................. 103 Hub Lubricant ...................................................................................... 439 Hub Replacement Pins ........................................................................432 Hub Replacement Spacers ..................................................................432 Hub Replacement Stems .................................................................... 436 Hydraulic Coupler - Rubber Cover ........................................................35 Hydraulic Couplers .................................................................................35 Hydraulic Pumps ...................................................................................175 // I // Impact Socket Sets ................................................................................ 74 Impact Sockets - Individual ..................................................................76 Impact Wrench Accessories ...................................................................71 Impact Wrenches - #5 Spline................................................................52 Impact Wrenches - 1" ............................................................................ 44 Impact Wrenches - 1/2" .........................................................................42 Impact Wrenches - 3/4" ....................................................................... 44 Impact Wrenches - 3/8" ........................................................................42 Inflating Connections ...........................................................................253 Inflation Chuck .................................................................................... 260 Inflation Gauge - Large Bore ..............................................................283 Inflator ................................................................................................. 264 Inflator Accessory Block ......................................................................283 Inflator Adapter ................................................................................... 260 Inflator Kit .............................................................................................283 Inflator System .................................................................................... 284 Inflators ................................................................................................. 281 Inflators - Automatic ...........................................................................279 Inflators - Digital ..................................................................................279 Inner Rim Cleaner .................................................................................110 Insertion Tools ...................................................................................... 412 // J // Jack Accessories ....................................................................................127 Jack Oil .................................................................................................. 152 Jack Plates ............................................................................................. 118 Jack Stands ............................................................................................135 Jacks .......................................................................................................177 Jacks - Bottle ......................................................................................... 113 Jacks - Garage ...................................................................................... 125 Jacks - High Tonnage ........................................................................... 134 Jacks - Lift ............................................................................................140 Jacks - Rolling ...................................................................................... 318 Jacks - Service ....................................................................................... 121 Jacks - Transmission ............................................................................ 143 Jacks - Truck ......................................................................................... 120 // K // Key Tags ............................................................................................... 368 Knee Pads ............................................................................................. 381 Knives - Tire Repair .............................................................................. 410 // L // Leak Detector ....................................................................................... 164 Lift Bridge ............................................................................................. 318 Lift Pads .................................................................................................317 Lifts ........................................................................................................ 310 Liquid Fill Tools ....................................................................................255 Liquid Lubricant - Blue ........................................................................ 163 Liquid Lubricant - Blue Bead Butter .................................................. 163 Lock Ring Installer ................................................................................ 181 Lock Ring Remover .............................................................................. 198 Locking Nuts ......................................................................................... 102 Loose Nut Prevention ............................................................................89 Loose Nut Prevention - Checkpoint .....................................................87 L-Rings ..................................................................................................259 Lubricant .............................................................................................. 162 Lubricant Tanks ....................................................................................375 Lubricants & Sealants ..........................................................................356 Lubricators ..............................................................................................27 Lug Nut and Wheel Stud Checker Set ..................................................93 Lug Nut Puller ........................................................................................97 Lug Nut Removal ....................................................................................92 Lug Nut Sockets .................................................................................... 94 Lug Nuts ..................................................................................................98 Lug Wrenches ...................................................................................... 204 Lug-Off Kits .......................................................................................... 105 // M // Mallets .................................................................................................. 200 Mechanics Gloves .................................................................................383 Mold Lubricant .................................................................................... 438 Mount/Demount Heads .......................................................................295 Mount/Demount Tools ......................................................................... 188 Mounting & Packing Compound ......................................................... 162 Mounting Paste - Universal ................................................................. 162 Mud Flaps ...............................................................................................175 // N // Nailhole Tester ..................................................................................... 434 Nipples ....................................................................................................35 Nitrile Gloves ........................................................................................383 Nitrogen Gauge ......................................................................................23 Nitrogen Inflation System .....................................................................23 Nitrogen Reel .........................................................................................30 No Rim Rust ........................................................................................... 161 Non-Impact Wrenches .......................................................................... 46 Non-Rust Rim Kote ............................................................................... 161 Nut Gauge ............................................................................................. 107 Nut Splitter .......................................................................................... 249 // O // OBDII Connector................................................................................... 221 Oil Dispensers .......................................................................................378 Oil Drain Funnels .................................................................................. 374 Oil Drains ..............................................................................................372 Oil Lift Drains ........................................................................................375 Oil Seal Hardware................................................................................. 102 O-Rings ................................................................................................ 246 SUPPLY CORPORATION

444 ALPHABETICAL INDEX // P // Paint Sticks & Markers ......................................................................... 167 Parts Return Bag ................................................................................. 368 Penetrants ............................................................................................ 165 Pinch Clamps ..........................................................................................39 Pliers ...................................................................................................... 361 Pre-Buff Cleaner...................................................................................392 Precure Accessories ............................................................................ 434 Pressure Sprayers ................................................................................ 438 Printers - Static Cling...........................................................................365 Pullers ................................................................................................... 180 // Q // Quick Nut Accessories ........................................................................ 308 Quick Nuts & Pressure Cups ................................................................307 // R // Radiator Fillers .....................................................................................378 Rams & Cylinders ................................................................................. 176 Rasp Blades & Spacers ....................................................................... 430 Rasps .................................................................................................... 407 Ratchets ................................................................................................. 64 Recovery & Recycling Systems ...........................................................376 Refrigerant Management System .......................................................377 Regulators...............................................................................................27 Repair Cement ......................................................................................393 Repair Cords .........................................................................................395 Replacement Rib Nuts ......................................................................... 105 Resharpening Stones ........................................................................... 431 Retread Brushes ...................................................................................435 Retread Release Liner ......................................................................... 436 Retreading Sidewall Wheels ............................................................... 416 Rib Nut Salvage Tool ........................................................................... 105 Rim Assemblies & Replacement Belts .............................................. 436 Rim Clamp Nuts ................................................................................... 102 Rim Clamps ........................................................................................... 103 Rim Gauges...........................................................................................332 Rim Guard ............................................................................................. 103 Rim Hole Plugs .....................................................................................254 Rim Nuts & Bushings ...........................................................................254 Rim Release .......................................................................................... 163 Rim Spud ..............................................................................................259 Rim & Ring Tools .................................................................................. 198 Rope Rubber .........................................................................................395 Rotary Gauges ......................................................................................433 Rotary Knife Blades ............................................................................. 416 Rubber Blocks .......................................................................................317 Rubber Solvents .................................................................................. 394 Rust Retardant & Tire Lube .................................................................160 // S // Safety Glasses ..................................................................................... 380 Safety Vests .......................................................................................... 381 Sanders .................................................................................................. 46 Scalers .....................................................................................................48 Scrapers ................................................................................................422 Screwdriver Sets .................................................................................. 361 Sealers .................................................................................................404 Serial Number Removers ..................................................................... 169 Service Reminder Stickers...................................................................365 Shock & Strut Valves ............................................................................253 Shop Cranes .......................................................................................... 156 Shop Press Accessories ........................................................................153 Shop Presses .........................................................................................153 Shop Vises .......................................................................................... 360 Sidewall Buffing Cup .......................................................................... 436 Skirt Nuts ............................................................................................... 99 Skiving Tools ........................................................................................ 405 Socket Adapters ................................................................................... 105 Socket Driver ........................................................................................ 361 Spare Tire Tools ....................................................................................106 Spray Bottles ........................................................................................ 164 Spraying Equipment ............................................................................435 Squeegees ............................................................................................362 Steering Wheel Covers ....................................................................... 369 Stitchers ................................................................................................ 421 Stitchers - Gooseneck ......................................................................... 421 Stud Alignment Tools .......................................................................... 149 Stud Cleaning Brushes ........................................................................ 108 Stud Cleaning Kit .................................................................................109 Stud Cleaning Tool ............................................................................... 108 Stud Installers.......................................................................................106 Stud Removers ..................................................................................... 105 Stud & Hub Tools ................................................................................... 49 Studding Equipment .............................................................................371 Surface Conditioning Discs ...................................................................48 // T // Tack Bands ............................................................................................435 Tailpipe Adapters .................................................................................358 Tank Valves ...........................................................................................253 Thread Gauges ..................................................................................... 107 Tire & Tube Mounting Compound - Concentrated ............................. 161 Tire and Tube Mounting Compound ...................................................160 Tire Bags .............................................................................................. 369 Tire Branding Inserts ........................................................................... 168 Tire Buffer Accessories ..........................................................................55 Tire Buffers ............................................................................. 48, 63, 405 Tire Cart ................................................................................................367 Tire Cart Replacement Wheels ...........................................................367 Tire Changer - Manual .........................................................................288 Tire Changer Accessories ................................................................... 294 Tire Changer Base Plate ......................................................................207 Tire Changers............................................................................... 289, 297 Tire Changing Stand ............................................................................ 213 Tire Changing System .......................................................................... 193 Tire Deflator Set ...................................................................................238 Tire Denailer .........................................................................................422 Tire Display .......................................................................................... 366 Tire Dolly ...............................................................................................367 Tire Gauges ...........................................................................................265 Tire Gauges - Adjustable .....................................................................272 Tire Gauges - Automotive .................................................................. 269 Tire Gauges - Digital ............................................................................270 Tire Gauges - Pencil .............................................................................274 Tire Gauges - Truck ............................................................................. 269 Tire Inflation Cage Accessories ........................................................... 213 Tire Inflation Cages .............................................................................. 210 Tire Inflation Hoses ............................................................................. 209 Tire Inflators ..................................................................................64, 208 Tire Insert Kit ........................................................................................422 Tire Irons .............................................................................................. 197 Tire Knocker .......................................................................................... 201 Tire Labels ............................................................................................ 368 Tire Lifter ............................................................................................... 151 Tire Lubricant - Black ...........................................................................160 Tire Mounting Compounds .................................................................. 163 Tire Mounting Paste .............................................................................. 161 Tire Paint ............................................................................................. 439 SUPPLY CORPORATION

445 ALPHABETICAL INDEX Tire Patch Prep Wheel ......................................................................... 414 Tire Pressure Equalization ...................................................................253 Tire Pressure Placard Stickers .............................................................222 Tire Probes ............................................................................................422 Tire Racks - Wall Mount ...................................................................... 366 Tire Regroovers .................................................................................... 169 Tire Repair & Storage Cabinets .......................................................... 428 Tire Repair Accessories ........................................................................388 Tire Repair Chemicals ......................................................................... 396 Tire Repair Hand Tools .......................................................................... 411 Tire Repair Insert Kit ...........................................................................400 Tire Repair Kit .........................................................................................63 Tire Repair Kits .....................................................................................401 Tire Repair Patches ............................................................................. 386 Tire Repair Patches - Heavy Duty ...................................................... 399 Tire Repair Patches & Plugs ................................................................397 Tire Repair Seals...................................................................................401 Tire Repair Strands ............................................................................. 399 Tire Repair Tool Pouch .........................................................................422 Tire Repair Tools and Accessories ....................................................... 411 Tire Repair Vacuum .............................................................................. 419 Tire Repair Valves - Inner Tubes .........................................................259 Tire Repairs ...........................................................................................398 Tire Sealant ........................................................................................... 166 Tire Sealant Tools and Accessories ..................................................... 166 Tire Slings .............................................................................................. 181 Tire Snakes ........................................................................................... 205 Tire Spoons ........................................................................................... 195 Tire Spreaders ..................................................................................... 424 Tire Swabs and Brushes .......................................................................160 Tire Talc .................................................................................................392 Tire Tools ............................................................................................... 197 Tire Valve Assembly Kit ....................................................................... 261 Tire Valves .............................................................................................245 Tire Valves - Large Bore ......................................................................262 Tire Veneer .......................................................................................... 439 Torque Accessories ............................................................................... 80 Torque Extensions ..................................................................................78 Torque Multipliers ..................................................................................86 Torque Sockets .......................................................................................78 Torque Tools - Blue Tork ........................................................................82 Torque Wrenches .................................................................................. 80 Torque Wrenches - Valve Nut ............................................................ 249 TPMS Accessory Kits ........................................................................... 230 TPMS Accessory Kits - Aftermarket ...................................................242 TPMS Bundles ...................................................................................... 220 TPMS Combo Kits .................................................................................234 TPMS Kits ..............................................................................................235 TPMS Replacement Sensors ............................................................... 240 TPMS Replacement Valves ..................................................................222 TPMS Sensors .......................................................................................222 TPMS Sensors - Universal ....................................................................243 TPMS Tools ............................................................................................ 218 TPMS Tools - Software Updates ..........................................................225 TPMS Torque Tools ...............................................................................236 TPMS Transmitters ............................................................................... 241 TPMS Valve Caps ..................................................................................233 TPMS Valve Stems ................................................................................233 Trailer Stands ........................................................................................ 152 Tread Depth Gauges ........................................................................... 268 Tread Depth Measurement Tools ........................................................ 219 Truck Ramps ........................................................................................ 128 // U // Underhoist Stands ............................................................................... 152 // V // Valve Accessories .................................................................................252 Valve Adapter Gun ...............................................................................255 Valve Adapters .....................................................................................257 Valve Breaker....................................................................................... 249 Valve Caps ..............................................................................................23 Valve Caps & Cores ..............................................................................265 Valve Connectors ................................................................................ 260 Valve Cores ...................................................................................227, 250 Valve Extensions ..................................................................................252 Valve Inserts ........................................................................................227 Valve Stem Removal Tool ................................................................... 249 Valve Stems ..........................................................................................227 Valve Tool Kit ....................................................................................... 249 Valve Tools ............................................................................................265 Valve Tools - Insertion & Removal ..................................................... 266 Vulcanizing Cements ..........................................................................404 Vulcanizing Fluids ................................................................................392 // W // Wedges ................................................................................................ 200 Wheel & Rim Removal .........................................................................207 Wheel Arbor Adapters .........................................................................435 Wheel Balancer Accessories .............................................................. 306 Wheel Balancers ................................................................................. 300 Wheel Chocks .............................................................................. 183, 382 Wheel Cover Puller ............................................................................. 205 Wheel Dollies........................................................................................ 147 Wheel Installation Sleeves .................................................................. 107 Wheel Lift System ................................................................................ 142 Wheel Lifting Bar ................................................................................. 196 Wheel Lock Removal ............................................................................ 96 Wheel Nuts ........................................................................................... 102 Wheel Protectors ................................................................................. 103 Wheel Stud Alignment Set ................................................................... 101 Wheel Stud Alignment Tool .................................................................. 91 Wheel Stud Remover & Installer Cart ................................................ 107 Wheel Stud Repair .................................................................................93 Wheel Weight Hammer ........................................................................331 Wheel Weight Kit - Empty Display Only ........................................... 330 Wheel Weight Rack ............................................................................ 330 Wheel Weight Removal Tool ................................................................331 Wheel Weight Roll Stand ....................................................................329 Wheel Weight Rolls .............................................................................329 Wheel Weights - Heavy Duty Lead Truck ..........................................324 Wheel Weights - Adhesive Lead ........................................................326 Wheel Weights - Adhesive Steel ........................................................327 Wheel Weights - Lead Passenger ..................................................... 320 Wheel Weights - Plasteel ....................................................................323 Wheel Weights - Steel Passenger ......................................................322 Wheel Weights - Zinc Passenger ........................................................321 Wheel Weights - Zinc Truck ................................................................325 Wheelok Systems .................................................................................104 Wicking Products .................................................................................437 Wire Wheel Brushes ............................................................................ 418 Work Lights ................................................................................. 364, 423 Work Stations ................................................................................. 72, 318 Work Ticket Holder ............................................................................. 368 Wrenches ..................................................................................... 379, 202 SUPPLY CORPORATION

446 NUMERICAL INDEX 101-00058 ................14 101-00078 ................14 101-00158 .................14 101-01012 ..................14 101-10325 ..................15 101-11012 ...................14 101-23451 ..................21 101-24705 .................21 101-24751 ..................21 101-25452 .................21 101-27550 .................22 101-27551 ..................22 101-27552 .................22 101-27553 .................22 101-40780 ................14 101-40781 .................14 101-40782 .................14 101-40783 .................14 101-41012 ..................14 101-41112 ...................14 101-41512 ..................14 101-42112 ..................14 101-42512 ..................14 101-43512 ..................14 101-44112 ..................14 101-44512 .................14 101-50080 ................20 101-51120 ..................15 101-53120 .................15 101-54120 .................15 101-58000 ................17 101-61012 ..................16 101-61081 ..................16 101-61212 ..................16 101-61512 ..................16 101-61513 ..................16 101-65801 .................16 101-67514 ..................16 101-67515 ..................16 101-67581 ..................16 101-67583 .................16 101-71150 ..................21 101-71153 ...................22 101-73904 .................16 101-75080 ................20 101-75120 ..................15 101-75320 .................15 101-75420 .................15 101-78000 ................17 102-11530 ..................15 102-11560 .................15 102-11880 .................15 102-13030 .................20 102-13730 .................15 102-13760 .................15 102-13780 .................15 102-24125 .................21 102-24212 .................21 105-00015 ................19 105-00025 ...............19 105-00035 ...............19 105-00050 ...............19 105-00075 ...............19 105-00100 ................19 105-00125 ................19 105-00150 ................19 106-00519 ................17 106-11727 ..................17 106-11728 ..................17 106-11729 ..................17 106-11730 .................17 106-11882..................17 106-11883..................17 106-11884 .................17 106-13194 .................17 106-24305 ................22 106-24710.................22 106-24712 .................22 106-28530 ................17 106-30020 ...............22 106-89090 ...............17 106-94730................17 107-00125 .................36 107-69101 .................36 111-30002 .................26 111-32908 ..................26 111-32910 ..................26 111-32912 ...................26 111-35200..................26 111-35201 ...................26 111-35202 ..................26 111-35203 ..................26 111-35300 ..................26 111-35301 ...................26 111-35302 ..................26 111-35303 ..................26 111-35400 .................26 111-35401 ..................26 111-35402 ..................26 111-35403 ..................26 111-37600..................26 111-37601 ...................26 112-00162 .................27 112-00262.................27 112-00352 .................27 112-00353 .................27 112-00354 .................27 112-00376 .................27 112-00378 .................27 112-01352 ..................27 112-01354 ..................27 112-03910 .................27 112-03912 ..................27 113-00352 .................27 113-00353 .................27 113-00354.................27 113-00376 .................27 113-01352 ..................27 113-01353 ..................27 113-01354 ..................27 113-04108 .................27 114-00754 ................25 114-03352 ................25 114-03353 ................25 114-03354 .................25 114-13352 .................25 114-13353 .................25 114-13354 ..................25 114-75200 .................25 114-75201 ..................25 114-75202 .................25 114-75203 .................25 114-75300 .................25 114-75301 ..................25 114-75302 .................25 114-75303 .................25 114-75400 ................25 114-75401 ..................25 114-75402 .................25 114-75403 .................25 115-50508 ................26 115-50810 .................26 115-50812..................26 115-55200 .................26 115-55201 ..................26 115-55300 .................26 115-55301 ..................26 115-55400 ................26 115-55401..................26 115-57601 ..................26 117-00010 .................24 117-00055 ................27 117-00329 .................27 117-00355 .................27 117-00935 .................27 117-01481 ..................27 117-01681 ..................27 117-05050 ................17 117-05051 ..................17 117-05200.................27 117-05304 .................24 117-05702 .................24 117-09132 ..................24 117-11481 ....................27 117-58625 .................82 119-00011 ..................23 119-00130 .................23 119-00485 ................23 121-01225 ..................31 121-01250 .................31 121-03825 .................31 121-03851 ..................31 121-14700..................31 123-13825 .................32 123-14012 ..................32 123-14025 .................32 123-14050 .................32 123-38025 ................32 123-38050 ................32 123-38150 .................32 124-04435 ................28 124-04500 ...............28 124-07450 ................28 124-13500 .................30 124-15000 ................30 124-33500 ................30 124-75435 .................28 124-75450 ................28 124-77450.................28 125-04625 ................28 125-05450 ................28 125-05635 ................28 125-05650 ................28 125-06350 ................28 125-06500 ...............28 125-07650 ................28 125-07651 .................28 125-07652 ................28 125-07670 ................28 125-21215 ..................30 125-21408 .................30 125-21410 ..................30 125-35000 ................30 125-35004 ................30 125-55000................30 125-75635 .................28 125-75650 ................28 125-76050 ................29 125-76070 ................29 125-76075.................29 125-76100 .................29 125-77650 ................28 126-05850 ................28 126-07850 ................28 126-07851 .................28 126-08500 ...............28 126-15650 .................28 126-15851 ..................28 126-21120 ..................29 126-21121 ...................29 126-31120 ..................29 126-31121 ...................29 126-31180 ..................29 126-42500................30 126-43500 ................30 126-45000 ...............30 126-52500 ................30 126-75835 .................28 126-77850 ................28 126-78050 ................29 126-78075 ................29 126-79025 ................29 127-05880 ................30 127-11004 ..................29 127-11040 ..................29 127-11043 ..................29 127-21043 .................29 127-86871 .................294 127-86871 .................31 127-86872 .................294 127-86872 .................31 128-00006 ...............36 128-20000 ...............36 128-72021 .................32 128-72022 ................32 128-72023 ................32 128-72024 ................32 128-72025 ................32 131-00020 ................34 131-02514 ..................35 131-02516 ..................35 131-08888 .................33 131-17000 .................35 131-18000 .................35 131-61486..................33 131-61523 ..................33 131-61524 ..................33 131-61526 ..................33 131-61527 ..................33 131-61528 ..................33 131-61529 ..................33 131-61531 ...................34 131-61538 ..................33 131-61539 ..................33 131-61548 ..................33 SUPPLY CORPORATION

447 NUMERICAL INDEX 131-61550 ..................33 131-61551 ...................33 131-61573 ..................33 131-61574 ..................33 131-61578 ..................33 131-61579 ..................33 131-62523 .................33 132-03716 .................35 132-03718 .................35 132-61476 .................34 132-61478 .................34 132-61480 .................34 132-61481 ..................34 132-61553 .................34 132-61554 .................34 132-61558 .................34 132-61559 .................34 133-01855 .................34 133-01855 .................34 133-05012 .................35 133-05018 .................35 133-17030 .................35 133-61471 ..................34 133-61474 .................34 133-61563 .................34 133-61564 .................34 133-61568 .................34 133-61569 .................34 133-75112 ..................35 133-75116 ..................35 134-61487 .................34 134-61543 .................34 134-61544 .................34 134-61545 .................34 134-61552 .................34 135-00900 ...............34 135-00901 ................34 135-00910 ................34 135-00911 .................34 135-00980 ...............34 135-10605 .................35, 179 135-10606 ................35, 179 135-11606 ..................35, 179 135-12606 .................35, 179 135-61240 .................35 135-61241 ..................35 136-00344 ...............36 136-00366 ...............36 136-00401 ................37 136-00406 ...............37 136-00408 ...............37 136-00604 ...............37 136-00606 ...............37 136-00608 ...............37 136-00806 ...............37 136-00808 ...............37 136-01344.................36 136-01366.................36 136-02344 ................36 136-02366 ................36 136-03344 ................37 136-34490 ................36 136-61264 .................38 136-71404 .................37 136-71405 .................38 136-71406 .................38 136-71408 .................38 136-71440 .................38 136-71504 .................37 136-71604 .................37 136-71606 .................37 136-71806 .................37 136-71808 .................37 136-72404 ................37 137-00344 ................38 137-00346 ................38 137-00366 ................38 137-00388 ................38 137-00418 .................37 137-00420 ................37 137-00439 ................37 137-00621 .................37 137-01324 .................38 137-01344 .................38 137-01346 .................38 137-01348 .................38 137-01368 .................38 137-01389 .................38 137-01418 ..................37 137-01439 .................37 137-01520 .................37 137-01621 ..................37 137-01623 .................37 137-01624 .................37 137-08550 ................38 137-10010 ..................32 137-10011 ...................32 137-11420 ..................32 137-11520 ..................38 137-11621 ...................38 137-11623 ..................38 137-39525 .................38 137-50291 .................38 137-72421 ..................38 137-73215 ..................38 137-73225 .................38 137-73235 .................38 137-73255 .................38 137-73265 .................38 137-73275 .................38 137-73285 .................38 137-73295 .................38 137-73305 .................38 137-73315 ..................38 137-73325 .................38 137-73335 .................38 137-73345 .................38 137-73355 .................38 151-00826 ................47 152-00212 .................69 152-00724 ................42 152-00828 ................47 152-02115 ..................69 152-07727 .................42 152-07729 ................42 152-07829 ................47 152-07830 ................47 153-00231 .................58 153-00244 ................58 153-00734 ................42 153-00736 ................43 153-01734 .................42 153-02235 ................58 153-02312 .................58 153-02442 ................58 153-07336 ................43 153-07492 ................42 153-07732.................43 153-07737 .................42 153-07748 ................43 153-07749 ................43 153-07829 ................47 153-07830 ................47 153-08281 .................47 153-12235..................58 153-12260 .................53 153-17492 ..................42 153-22135 .................58 153-22235 .................58 153-23120 .................53 153-23121 ..................53 153-32135..................58 153-32235 .................58 153-42235 ................58 153-71521 ..................61 153-72522 .................61 153-76920 ................62 153-76922 .................62 153-77482 .................43 153-77492 .................43 153-94911 ..................61 153-96911 ..................61 154-00259................58 154-00261 ................59 154-00772 ................44 154-01772 .................44 154-02613 .................59 154-02616.................59 154-07769 ................44 154-12145 ..................59 154-21617 ..................59 154-22145 .................59 154-27763.................44 154-32145 .................59 154-37763 .................44 154-77696 ................44 155-00280 ...............60 155-00290 ...............60 155-00293 ................60 155-00295 ................59 155-02806 ................60 155-02850 ................59 155-02856 ................60 155-07773.................44 155-07778 ................44 155-07779 ................45 155-07782 ................45 155-07783 ................45 155-07971 .................45 155-07976 ................45 155-12856 .................52 155-17779 .................45 155-17782 .................45 155-17786 .................52 155-21710 ..................60 155-26464 ................52 155-27786 ................44 155-28506 ................59 155-28560 ................60 155-50000 ...............44 155-77736 .................44 155-77786 .................44 155-77826 .................45 155-77836 .................45 155-86920 ................62 155-86922 ................62 156-02901 ................60 156-02931 .................60 156-02951 .................59 156-12856 .................52 156-17786 .................52 156-28006 ...............60 156-28566 ................60 156-79716 .................45 157-00125 .................66 157-00302 ................66 157-00307 ................66 157-00308 ................66 157-00313 .................68 157-00327 ...............67 157-00789 ................50 157-00874 ................48 157-00875 ................49 157-00876 ................49 157-01035 .................56 157-01038 .................56 157-01327 .................67, 406 157-01879 .................50 157-03252 .................57 157-04038 ................405 157-06010 ................405 157-06510 .................405 157-06520 ................406 157-06550 ................405 157-07120 .................48 157-07302 ................50 157-07802 ...............67 157-07803 ...............67 157-10874 ..................57 157-10875 .................57 157-14038 .................405 157-16010 ..................405 157-16510 ..................405 157-16520 .................406 157-16550 .................405 157-17302 ..................50 157-17802 ................67 157-17803 .................67 157-78926 .................50 158-00311 .................68 158-00778 ................46 158-00871 ................48, 406 158-00873 ................48, 406 158-01871 ..................48 158-01873 .................48 158-03012 .................68 158-07202 ................46 158-10871 ..................55, 406 158-10873 .................55, 405 158-11871 ...................55, 405 158-40920 ...............63 158-40922 ................63 158-45922 ................63 159-00132.................66 163-01018 .................76 SUPPLY CORPORATION

448 NUMERICAL INDEX 163-01019 .................76 163-01021 .................76 163-01022 .................76 163-01024 ................76 163-01026 ................76 163-01030 ................76 163-01032 .................76 163-01033 .................76 163-01034 ................76 163-01036 ................76 163-01048 ................76 163-01150 .................74 163-01151 ..................74 163-01152 ..................74 163-01153 ..................74 163-02668 ................74 163-02669 ................74 163-02849 ................74 163-05153 .................74 163-10100 .................76 163-10101 ..................76 163-10111 ...................76 163-10120 .................76 163-10121...................76 163-10130..................76 163-10131 ...................76 163-10140 .................76 163-10141 ..................76 163-10142 ..................76 163-10143 ..................76 163-10150 .................76 163-10151...................76 163-10160 .................76 163-10161 ..................76 163-10162 ..................76 163-10163 ..................76 163-10170 ..................76 163-10171 ...................76 163-10172 ..................76 163-10174 ..................76 163-10180 .................76 163-10181 ..................76 163-10182 ..................76 163-10183 ..................76 163-10190 .................76 163-10191 ..................76 163-10200 ................76 163-10201..................76 163-10210 .................76 163-10211...................76 163-10220 .................76 163-10221 ..................76 163-10222 .................76 163-10223 .................76 163-10230 .................76 163-10240 .................76 163-10241 ..................76 163-10260 .................76 163-10261 ..................76 163-10262 .................76 163-10263 .................76 163-10270 .................76 163-10271 ..................76 163-10280 .................76 163-10281 ..................76 163-10282 .................76 163-10283 .................76 163-10300 ................76 163-10320 .................76 163-10360 .................76 163-10400 ................76 163-10401 .................76 163-11032 ..................76 163-15260 .................76 163-22017 .................76 163-22019 .................76 163-22021 .................76 163-22022 ................76 163-22219 .................74, 92 163-91217 ..................81 163-91219 ..................81 163-91221 ..................81 163-91234 .................81 163-91236 .................81 163-91278 .................81 164-02017 ................77 164-02019 ................77 164-02020 ...............77 164-02021 ................77 164-02024 ...............77 164-02026 ...............77 164-02028 ...............77 164-02030 ...............77 164-02032 ................77 164-02033 ................77 164-02034 ...............77 164-02035 ................77 164-02036 ...............77 164-02038................77 164-02041 ................77 164-02042 ...............77 164-02044 ...............77 164-02046 ...............77 164-02052 ................77 164-02056 ...............77 164-02060 ...............77 164-02110 .................75 164-02181 .................75 164-02185.................75 164-02323 ................77 164-04626 ...............75 164-20260 ...............77 164-20270 ................77 164-20271 .................77 164-20300 ...............77 164-20301 ................77 164-20330 ................77 164-20350 ................77 164-20360 ...............77 164-20401 ................77 164-20402 ...............77 164-20480 ...............77 164-20481 ................77 164-20482 ................77 165-03017 .................77 165-03019 ................77 165-03020 ...............77 165-03021 .................77 165-03026 ................77 165-03027 ................77 165-03030................77 165-03033 ................77 165-03034 ................77 165-03035 ................77 165-03041 ................77 165-03042 ................77 165-03044 ...............77 165-03046 ...............77 165-03052 ................77 165-03054 ................77 165-03056 ................77 165-03060 ...............77 165-03119 .................75 165-03190 ................75 165-03197 .................75 165-03321 .................77 165-03323 ................77 165-03517 .................77 165-03820 ................77 165-05626 ................75 165-30280 ................77 165-30281 .................77 165-30300 ................77 165-30301 .................77 165-30302 ................77 165-30320 ................77 165-30321 .................77 165-30361 .................77 165-30362 ................77 165-30380 ................77 165-30381 .................77 165-30401 ................77 165-30402 ................77 165-30410 ................77 165-30420 ................77 165-30481 .................77 165-30482 ................77 166-04026 ...............77 166-04033 ...............77 166-04034 ...............77 166-04035 ...............77 166-04038 ...............77 166-04040 ...............77 166-04041 ................77 166-04042 ...............77 166-04048 ...............77 166-04191 .................75 166-04323 ................77 166-40360 ...............77 166-40361 ................77 166-40480 ...............77 167-01721 ..................81 167-12050 .................74 167-12051 ..................74 167-12110 ...................76 167-12179 ..................76 167-12460 .................76 167-12461 ..................76 167-12490 .................76 167-12510 ..................76 167-12910 ..................76 167-12911 ...................76 167-12912 ..................76 167-18195 ..................76 167-21215 ..................76 167-21225 .................76 167-22225 .................76 168-00058 ...............83, 249 168-00250 ...............80 168-00425 ...............80 168-00600 ...............80 168-00652 ...............80, 236 168-00916 ................83, 249 168-01200 ................85 168-02022 ................80 168-02100 ................85 168-02101 .................85 168-03250 ................85 168-03251 .................85 168-03252 ................85 168-04400 ...............85 168-05600 ...............85 168-05601 ................85 168-07600 ...............46, 82 168-07602 ................46, 82 168-07603 ................46, 82 168-12080 ................81 168-12100 .................81 168-12120 ..................81 168-12140 .................81 168-12250 .................82 168-12254 .................80 168-12410 ..................81 168-12412 ..................81 168-12414 ..................81 168-12450 .................81 168-12465 .................81 168-12480 .................81 168-12997 .................78 168-12999 .................78 168-13000 ................81 168-16000 ................81 168-18141 ..................84 168-21755 .................80 168-21780 .................80 168-21910 .................80 168-21965 .................80 168-21980 ................80 168-22110 .................80 168-22180 .................80 168-22212 .................80 168-22214 .................80 168-22610 .................80 168-23014 .................80 168-42760 ................84 168-42761 .................84 168-43528 ................84 168-47501 .................82 168-57600 ................84 168-57601 .................84 168-60011 .................80 168-60020 ...............83 168-60025 ...............83 168-67250 ................83 168-67510 .................83 168-96111 ..................82 168-97354 ................85 169-01002 ................77 169-01003 ................77 169-01005 ................77 169-01020 ................77 169-01234.................75 169-02006 ...............77 169-02010 ................77 169-02013 ................77 SUPPLY CORPORATION

449 NUMERICAL INDEX 169-02030 ...............77 169-03006 ...............77 169-03010 ................77 169-03013 ................77 169-03020 ...............77 169-04010 ................77 169-04020 ...............77 169-12006 ................81 169-13413 ..................78 169-20100 ................77 171-01151 ...................66 171-01161 ...................66 171-01171 ...................66 171-47032 .................51 171-47050 .................51 171-47051 ..................51 171-47052 .................51 171-47057 .................51 171-47059 .................51 171-47061 ..................51 171-47071 ..................51 171-47073 .................51 171-47074 .................51 171-47078 .................51 171-47091 ..................51 171-47095 .................51 171-47096 .................51 171-47270 .................51 171-47300 .................51 172-55721 ..................64 172-56622 ................64 173-00018 ................55, 411 173-00019 ................55, 411 173-00020 ...............55, 411 173-00022 ................55, 411 173-00023 ................55, 411 173-00101 .................48 173-00220 ................48 173-09150.................411 173-09165 .................411 173-09166.................411 173-09167 .................411 173-09201 .................411 173-09202 ................411 173-09211 ..................411 173-09212 .................411 173-09213 .................411 173-09214 .................411 173-09215 .................411 173-09216 .................411 173-09400 ...............411 175-00873 ................55 175-10026 .................54 175-10037 .................54 175-10040 ................54 175-10043 .................54 175-18713 ..................55 175-23104 .................55 175-23142 .................71 175-28713 .................55 175-33104 .................71 175-82651 .................55 175-83071 .................55 176-18406 .................54 181-00016 .................70 181-00085 ................70 181-00404 ................70 181-00406 ...............70 181-01404 .................70 181-10510 ..................71 181-10540 .................71 181-11510 ...................71 181-11540 ..................71 181-12228 ..................71 203-10003 ................351 203-35000 ...............351 218-00060 ...............318 218-79324.................318 221-75200 ................347 221-75400 ................347 221-75600 ................347 221-75800 ................347 222-25430 ...............344 222-25435 ................344 222-25440 ...............344 222-25445 ...............344 222-62010 ................345 222-66040 ...............346 222-66045 ...............346 222-66047 ...............346 222-67467 ................346 222-67475 ................345 222-67660 ...............346 222-82395 ................344 222-87520 ................344 223-81240 ................343 223-82360 ...............346 223-91000 ...............347 223-91040................347 226-67030 ...............345 226-67090 ...............345 226-67125 ................346 226-67165 ................346 226-67230 ...............345 226-67290 ...............345 226-67410 ................345 227-40920 ...............346 227-89000 ...............350 228-00761 ................352 228-00764 ...............352 228-07600 ...............352 228-61400 ...............350 231-00532 ................347 231-00535 ................347 231-23100 .................342 231-23130 .................342 231-23180 .................342 231-23220 ................342 231-23230 ................342 231-23580 ................342 231-23755 .................343 231-23765 .................343 231-86250 ................344 231-87310 .................343 231-87385.................343 231-87400 ................343 231-87500 ................343 233-23120 ................347 233-23130 ................347 236-00100 ...............345 236-45938 ...............350 236-77350 ................350 237-23510 .................344 237-23520 ................344 237-23530 ................344 237-23540 ................344 241-35001 .................348 241-35002 ................348 241-35003 ................348 241-35004 ................348 241-35005 ................348 241-35006 ................348 241-35007 ................348 243-00841 ................348 243-00842 ...............348 243-00843 ...............348 243-00844 ...............348 243-00845 ...............348 243-00846 ...............348 243-00847 ...............348 243-00848 ...............348 243-00891 ................348 243-00892 ...............348 243-00893 ...............348 243-00894 ...............348 243-00895 ...............348 243-00896 ...............348 243-00897 ...............348 243-00898 ...............348 246-35010 ................348 246-35011 .................348 246-35012 ................348 246-35020 ...............348 246-35021 ................348 246-35022 ...............348 246-35030 ...............349 246-35031 ................349 246-35032 ...............349 246-35040 ...............349 246-35041 ................349 246-35042 ...............349 246-35060 ...............349 246-35061 ................349 246-35062 ...............349 246-35070 ...............349 246-35071 ................349 24