428 ALIGNMENT // CAMBER/CASTER TOOLS Light Truck/SUV Camber/Caster Sets Camber/Caster Tools (cont.) F150/250 (L/D) 2/4WD CAMBER/CASTER KIT • Used to change caster and/or camber on the new F150, F250 (L/D), Expedition and Navigator • Replace the existing upper control arm mounting bolts with these cam bolts for caster/camber changes up to 2.0˚ • One kit covers both sides of the vehicle • ESTIMATED INSTALLATION TIME: .5 hr/side ASCOT NO. FOR SPECIALTY 231-87385 SPECIALTY NO. 87385 ASCOT NO. FOR INGALIS 231-00290 INGALLS NO. I-87385 DESCRIPTION APPLICATIONS F/150/250, 2/4WD Camber Caster Kit FORD: 1997-03 F150, F250 (L/D), 199702 2WD & 4WD Expedition; LINCOLN: 1997-02 2WD & 4WD Navigator THRUST 231-87385 ALIGNMENT PLATES • Allows for corrections of setback and thrust angle on most vehicles with rear leaf springs • Install by loosening the U-bolts holding the leaf spring to the axle, installing the alignment plate between the axle and leaf spring and re-tightening the U-bolts • Kit includes multiple parts to provide coverage of most vehicles with rear leaf springs, including all early model passenger cars • One kit covers one side of the vehicle • ESTIMATED INSTALLATION TIME: .3 hr/side • NOTE: Allow extra time for rusted bolts - new, longer U-Bolts may be required ASCOT NO. MFG. NO. DESC. 231-63020 63020 GM 2WD & 4WD CAMBER/CASTER KIT • Replaces the upper control arm mounting bolts • Remove the O.E. bolts and replace with these cams, rotating them to provide up to 2˚ camber and/or caster adjustment • One kit covers both sides of the vehicle • ESTIMATED INSTALLATION TIME: .5 hr/side ASCOT NO. FOR SPECIALTY 231-87400 SPECIALTY NO. 87400 ASCOT NO. FOR INGALIS 231-00288 INGALLS NO. DESCRIPTION APPLICATIONS I-87400 GM 2/4WD Camber Caster Kit GM: 1988-99 1500, 2500, 3500 C & K series 2WD/4WD trucks, 1990 & up Safari AWD Van; CHEVROLET: 1990 & up Astro AWD Van EXPLORER CAMBER/ CASTER KIT GM 2WD & 4WD CAMBER/CASTER KIT • Kit will provide up to 2˚ positive or negative camber/caster adjustment • Replace the O.E. upper control arm mounting bolts with the #87500 cam bolts for fast and efficient adjustment • One kit covers both sides of the vehicle • ESTIMATED INSTALLATION TIME: .5 hr/ side passenger side; .7 hr/side driver side ASCOT NO. FOR SPECIALTY 231-87500 SPECIALTY NO. 87500 ASCOT NO. FOR INGALIS 231-00286 INGALLS NO. DESCRIPTION APPLICATIONS I-87500 Ford Explorer Camber/ Caster Set FORD: 1995-01 2WD & 4WD Explorer, 1998 & up 2WD & 4WD Ranger; MERCURY: 1995-01 2WD & 4WD Mountaineer; MAZDA: 1998 2WD & 4WD B-Series Pickup • Set of 4 cams for quick installation without having to remove the upper control arm bolt • Change camber and caster up to ±1.75° • One kit covers both sides of the vehicle • ESTIMATED INSTALLATION TIME: .3 hr/side 231-87500 ASCOT NO. MFG. NO. DESC. 231-87310 87310 Explorer Camber/ Caster Kit APPLICATIONS 2-3/8" Width Vehicles with 2-3/8" wide to 2-3/4" wide leaf springs including 60mm, 65mm and 70mm leaf springs of import trucks; all passenger vehicles with rear leaf springs 231-87400 231-63030 63030 3" Width Vehicles with 3", 3-1/2" and 3-5/8" wide leaf springs including 80mm, 90mm and 100mm wide leaf springs 231-63020 231-87310 APPLICATIONS FORD: 1995-01 2WD & 4WD Explorer, 1998-02 2WD & 4WD Ranger; MERCURY: 1995-01 & up 2WD & 4WD Mountaineer; MAZDA: 1998 2WD & 4WD B-Series Pickup BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION ALIGNMENT // CAMBER/CASTER TOOLS
431 Publizr Home