302 VALVE HARDWARE // LARGE BORE VALVES Check Valve, Inflation Chuck, Swivel Angle Connectors, Super Large Bore Inflator Adapter Large Bore Valves (cont.) CHECK VALVE • Complete with cap • Permits rapid inflation and deflation • Eliminates need for core housing and inflation adapter • Used with 6190 air chuck ASCOT NO. 466-00860 MFG. NO. TR NO. 6185 DESCRIPTION TR-L-860 Check Valve 466-00860 QUICK CONNECTION INFLATION CHUCK • Designed specifically for use with 6185 check valve • Sliding sleeve locks air chuck onto check valve and permits unrestricted air flow • Gauging can be done through valve on chuck • Positive air line shut off-valve must be installed in back of air chuck ASCOT NO. 466-06190 MFG. NO. DESCRIPTION 6190 Quick Connection Inflation Chuck SWIVEL ANGLE CONNECTORS • Component two of the super large bore system is generally a swivel connector that screws onto the spud • Connectors of various angles and lengths are available • Other end of the connector accommodates a MT-3000 flexible extension which attaches to the R-520 core housing of the 6185 check valve ASCOT NO. MFG. NO. 466-00525 466-00685 466-00625 466-00675 466-00660 466-00529 R-525 R-685 R-625 R-675 R-660 BEND ANGLE 90° 85° 80° 75° 60° R-529-5-1/4 90° PARTS INCLUDEDIN-100A PARTS LISTPARTS INCLUDED E-3100-2A Connector Sleeve IN-100-1A Body for IN-100 IN-100-3A Nut for Connector Sleeve 10218 O-Ring G-202 Teflon Washer ASCOT NO. MFG. NO. DESCRIPTION 466-05311 IN-100A E-3100-12 Hand Knob E-3100-1A Stem and Collet 464 Lock nut A-147 SWIVEL ANGLE SUPER LARGE BORE INFLATOR ADAPTER 466-06190 • New, safer alternative to IN-80A • Left hand threads on union body — will not come loose when screwing on to valve • New non-removable stem guide • 3/4" pipe thread for easy air hose connection • During inflation, air pressure in the tire can be checked through the stem knob with a tire pressure gauge • Will insert or extract CH-8 or CH-9 core housing • Pressur be checked without disconnecting with a Lar Bore Gauge • 1-piece stainless steel stem and collet • Reduces inflation time 60%, defla time 80% • The core housing is held in a s steel extractor by a snap ring • Extractor is rugged enough so that the core housing can be loosened or tightened without being damaged • THE IN-100 INFLATOR ADAPTER SAVES TIME BY FAST INFLATION OR DEFLATION ON A TIRE: After removing the valve cap, the inflator is screwed onto the valve stem. The inflator stem is pushed in to engage the flats on the core housing. By rotating the stem counter clockwise, the core housing can be removed without any danger to the person removing it. The core housing is pulled up into the inflator body and held there during inflation or deflation. Can also be used for liquid-filling tires equipped with Super Large Bore valves. SLB-55L MB-55-3 NO THREAD LOCK IN-100-2 IN-100-1 IN-100-4B 568-207 466-00525 PARTS LIST: SLB-55L Ejector Union MB-55-3 Gasket for G-201 IN-100-1 Adapter Body IN-100-2 Stem and Collet G-206 Gasket for Stem Nut 466-00675 E-3100-10 Stem Sealing Nut 568-207 O-Ring for G-207 IN-100-4B Hand Knob 464 Lock Nut A-147 Dome Cap 466-05311 FAST INFLATION OR DEFLATION H-47 464 Super Large Bore Inflator Adapter BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION VALVE HARDWARE // LARGE BORE VALVES
305 Publizr Home